bmusb is a free driver for BlackMagic's Intensity Shuttle USB3 card, which has no official Linux driver. It runs in userspace through usbfs, which may mean it could also probably run on FreeBSD, but it's untested. Current tested features: * HDMI capture on 576p60, 720p60, 1080i60 (1080p60 is unfortunately not supported in newer firmwares; I haven't tried older), plus 24, 50 and 59.97 Hz * 8-channel 24-bit 48 kHz locked audio capture * Analog audio capture, including setting levels * 8-bit 4:2:2 and 10-bit 4:2:2 capture The Intensity Shuttle follows a protocol whose exact format is still unknown, and the driver is still in alpha stage. (There is no API or ABI stability, for one, and everything is really messy and uncommented.) In particular, it will often do something on init that makes the card seemingly reset and disconnect off the bus (and then reset). This being said, once it's actually up, I've done ten-hour 720p60 captures on my Lenovo X240 without a single drop. It seems to want about 10–15% of one CPU core. The driver itself lives in bmusb.cpp; main.cpp contains a very simple client that just checks for frame continuity. It's recommended to run as root or some other user that can run the USB thread at realtime priority, as USB3 isochronous transfers are very timing sensitive. The driver has only been tested with the 10.4.3 firmware, and there is currently no tool to upgrade or downgrade the firmware on the card. bmusb is Copyright 2015 Steinar H. Gunderson and licensed under the GNU General Public License, version 2, or at your option, any later version. See the COPYING file.