Update performance claims in README.

[cubemap] / README

diff --git a/README b/README
index 4410010d148cde515898ffb7af9b49ddff91a97b..0712cbd50262ca958d2da3498ea03d97ce153a66 100644 (file)
--- a/README
+++ b/README
@@ -1,31 +1,37 @@
 Cubemap is a high-performance, high-availability video reflector,
-specifically made for use with VLC. It is currently in alpha stage.
+specifically made for use with VLC.
 
 A short list of features:
 
  - High-performance, through a design with multiple worker threads,
    epoll and sendfile (yes, sendfile); a 2GHz quadcore can saturate
-   10 gigabit Ethernet, given a modern kernel, a modern NIC
-   and the right kernel tuning.
+   10 gigabit Ethernet (even with TLS) given a modern kernel.
  - High-availability. You can change any part of the configuration
    (and even upgrade to a newer version of Cubemap) by changing cubemap.config
    and sending a SIGHUP; all clients will continue as if nothing had happened
    (unless you delete the stream they are watching, of course).
    Cubemap also survives the encoder dying and reconnecting.
- - Per-stream fwmark support, for TCP pacing through tc (separate config needed).
+ - Support for setting max pacing rate through the fq packet scheduler
+   (depends on Linux 3.13 or newer).
  - Reflects anything VLC can reflect over HTTP, even the muxes VLC
    has problems reflecting itself (in particular, FLV).
+ - Multicast support, both for sending and receiving (supports only protocols
+   that can go over UDP, e.g. MPEG-TS). Supports both ASM and SSM.
+ - TLS output support, through the TLSe library (requires libtomcrypt)
+   and the Linux kernel's kTLS (Linux 4.13 or newer). There are a few
+   limitations; see below.
  - IPv4 support. Yes, Cubemap even supports (some) legacy protocols.
 
 
 HOWTO:
 
-  sudo aptitude install libprotobuf-dev protobuf-compiler
+  sudo apt install libprotobuf-dev protobuf-compiler libsystemd-dev libtomcrypt-dev
+  ./configure
   make -j4
 
-If you want to use HTTP input (you probably want to), patch VLC with the
-included file vlc-metacube.diff. Then start the VLC encoder with the
-“metacube” flag to the http access mux, like this:
+If you want to use HTTP input (you probably want to), you want VLC 2.2.0
+or newer. Then start the VLC encoder with the “metacube” flag to the http
+access mux, like this:
 
   cvlc [...] --sout '#std{access=http{metacube,mime=video/x-flv},mux=flv,dst=:4013/test.flv}'
 
@@ -42,7 +48,38 @@ are OK, and then exec() the new version, which deserializes everything and
 keeps going.
 
 
+Notes on TLS support:
+
+Cubemap supports TLS on output, so that you can play video on TLS
+web sites without issues with mixed content. TLS on input streams is
+not (yet) supported.
+
+TLS requires kTLS, ie., Linux >= 4.13 with CONFIG_TLS enabled. Only cipher
+suites supported by kTLS is supposed, ie., AES-128-GCM (if no such cipher
+suite is available, the connection will be aborted). If the server is restarted
+before the key exchange for a connection is completed, that connection will
+not survive the restart, unlike all other connections. (This is a TLSe
+limitation.) You can have different certificates on different ports (and
+have separate ports for TLS and non-TLS), but SNI is not yet supported.
+
+
+Munin plugins:
+
+To activate these, symlink them into /etc/munin/plugins. If you don't put
+the files in the expected default locations (as done by 'make install'),
+you probably want some configuration in /etc/munin/plugin-conf.d/cubemap or
+similar, like this:
+
+[cubemap*]
+user <something>
+env.cubemap_config /etc/cubemap/cubemap.config
+env.cubemap_stats /var/lib/cubemap/cubemap.stats
+env.cubemap_input_stats /var/lib/cubemap/cubemap-input.stats
+
+
 Legalese: 
 
-Copyright 2013 Steinar H. Gunderson <sgunderson@bigfoot.com>.
+Copyright 2013 Steinar H. Gunderson <steinar+cubemap@gunderson.no>.
 Licensed under the GNU GPL, version 2. See the included COPYING file.
+
+See tlse/LICENSE for TLSe licensing.