// Three-lobed Lanczos, the most common choice.
// Note that if you change this, the accuracy for LANCZOS_TABLE_SIZE
// needs to be recomputed.
-#define LANCZOS_RADIUS 3.0
+#define LANCZOS_RADIUS 3.0f
#include <epoxy/gl.h>
#include <assert.h>
namespace {
-template<class T>
-struct Tap {
- T weight;
- T pos;
-};
-
float sinc(float x)
{
if (fabs(x) < 1e-6) {
return 0.0f;
}
float table_pos = x * (LANCZOS_TABLE_SIZE / LANCZOS_RADIUS);
- int table_pos_int = int(table_pos); // Truncate towards zero.
+ unsigned table_pos_int = int(table_pos); // Truncate towards zero.
float table_pos_frac = table_pos - table_pos_int;
assert(table_pos < LANCZOS_TABLE_SIZE + 2);
return lanczos_table[table_pos_int] +
//
// The greedy strategy for combining samples is optimal.
template<class DestFloat>
-unsigned combine_many_samples(const Tap<float> *weights, unsigned src_size, unsigned src_samples, unsigned dst_samples, Tap<DestFloat> **bilinear_weights)
+unsigned combine_many_samples(const Tap<float> *weights, unsigned src_size, unsigned src_samples, unsigned dst_samples, unique_ptr<Tap<DestFloat>[]> *bilinear_weights)
{
float num_subtexels = src_size / movit_texel_subpixel_precision;
float inv_num_subtexels = movit_texel_subpixel_precision / src_size;
// Now that we know the right width, actually combine the samples.
unsigned src_bilinear_samples = src_samples - max_samples_saved;
- *bilinear_weights = new Tap<DestFloat>[dst_samples * src_bilinear_samples];
+ bilinear_weights->reset(new Tap<DestFloat>[dst_samples * src_bilinear_samples]);
for (unsigned y = 0; y < dst_samples; ++y) {
- Tap<DestFloat> *bilinear_weights_ptr = *bilinear_weights + y * src_bilinear_samples;
+ Tap<DestFloat> *bilinear_weights_ptr = bilinear_weights->get() + y * src_bilinear_samples;
unsigned num_samples_saved = combine_samples(
weights + y * src_samples,
bilinear_weights_ptr,
// Find the effective range of the bilinear-optimized kernel.
// Due to rounding of the positions, this is not necessarily the same
// as the intended range (ie., the range of the original weights).
- int lower_pos = int(floor(to_fp32(bilinear_weights[0].pos) * size - 0.5));
- int upper_pos = int(ceil(to_fp32(bilinear_weights[num_bilinear_weights - 1].pos) * size - 0.5)) + 2;
- lower_pos = min<int>(lower_pos, lrintf(weights[0].pos * size - 0.5));
- upper_pos = max<int>(upper_pos, lrintf(weights[num_weights - 1].pos * size - 0.5) + 1);
+ int lower_pos = int(floor(to_fp32(bilinear_weights[0].pos) * size - 0.5f));
+ int upper_pos = int(ceil(to_fp32(bilinear_weights[num_bilinear_weights - 1].pos) * size - 0.5f)) + 2;
+ lower_pos = min<int>(lower_pos, lrintf(weights[0].pos * size - 0.5f));
+ upper_pos = max<int>(upper_pos, lrintf(weights[num_weights - 1].pos * size - 0.5f) + 1);
float* effective_weights = new float[upper_pos - lower_pos];
for (int i = 0; i < upper_pos - lower_pos; ++i) {
assert(x0 < upper_pos - lower_pos);
assert(x1 < upper_pos - lower_pos);
- effective_weights[x0] += to_fp32(bilinear_weights[i].weight) * (1.0 - f);
+ effective_weights[x0] += to_fp32(bilinear_weights[i].weight) * (1.0f - f);
effective_weights[x1] += to_fp32(bilinear_weights[i].weight) * f;
}
assert(false);
}
+ ScalingWeights weights = calculate_scaling_weights(src_size, dst_size, zoom, offset);
+ src_bilinear_samples = weights.src_bilinear_samples;
+ num_loops = weights.num_loops;
+ slice_height = 1.0f / weights.num_loops;
+
+ // Encode as a two-component texture. Note the GL_REPEAT.
+ glActiveTexture(GL_TEXTURE0 + *sampler_num);
+ check_error();
+ glBindTexture(GL_TEXTURE_2D, texnum);
+ check_error();
+ if (last_texture_width == -1) {
+ // Need to set this state the first time.
+ glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
+ check_error();
+ glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT);
+ check_error();
+ glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT);
+ check_error();
+ }
+
+ GLenum type, internal_format;
+ void *pixels;
+ assert((weights.bilinear_weights_fp16 == nullptr) != (weights.bilinear_weights_fp32 == nullptr));
+ if (weights.bilinear_weights_fp32 != nullptr) {
+ type = GL_FLOAT;
+ internal_format = GL_RG32F;
+ pixels = weights.bilinear_weights_fp32.get();
+ } else {
+ type = GL_HALF_FLOAT;
+ internal_format = GL_RG16F;
+ pixels = weights.bilinear_weights_fp16.get();
+ }
+
+ if (int(weights.src_bilinear_samples) == last_texture_width &&
+ int(weights.dst_samples) == last_texture_height &&
+ internal_format == last_texture_internal_format) {
+ // Texture dimensions and type are unchanged; it is more efficient
+ // to just update it rather than making an entirely new texture.
+ glTexSubImage2D(GL_TEXTURE_2D, 0, 0, 0, weights.src_bilinear_samples, weights.dst_samples, GL_RG, type, pixels);
+ } else {
+ glTexImage2D(GL_TEXTURE_2D, 0, internal_format, weights.src_bilinear_samples, weights.dst_samples, 0, GL_RG, type, pixels);
+ last_texture_width = weights.src_bilinear_samples;
+ last_texture_height = weights.dst_samples;
+ last_texture_internal_format = internal_format;
+ }
+ check_error();
+}
+
+ScalingWeights calculate_scaling_weights(unsigned src_size, unsigned dst_size, float zoom, float offset)
+{
+ if (!lanczos_table_init_done) {
+ // Only needed if run from outside ResampleEffect.
+ init_lanczos_table();
+ }
+
// For many resamplings (e.g. 640 -> 1280), we will end up with the same
// set of samples over and over again in a loop. Thus, we can compute only
// the first such loop, and then ask the card to repeat the texture for us.
// This is both easier on the texture cache and lowers our CPU cost for
// generating the kernel somewhat.
float scaling_factor;
+ int num_loops;
if (fabs(zoom - 1.0f) < 1e-6) {
num_loops = gcd(src_size, dst_size);
scaling_factor = float(dst_size) / float(src_size);
num_loops = 1;
scaling_factor = zoom * float(dst_size) / float(src_size);
}
- slice_height = 1.0f / num_loops;
unsigned dst_samples = dst_size / num_loops;
// Sample the kernel in the right place. A diagram with a triangular kernel
float radius_scaling_factor = min(scaling_factor, 1.0f);
int int_radius = lrintf(LANCZOS_RADIUS / radius_scaling_factor);
int src_samples = int_radius * 2 + 1;
- Tap<float> *weights = new Tap<float>[dst_samples * src_samples];
+ unique_ptr<Tap<float>[]> weights(new Tap<float>[dst_samples * src_samples]);
float subpixel_offset = offset - lrintf(offset); // The part not covered by whole_pixel_offset.
assert(subpixel_offset >= -0.5f && subpixel_offset <= 0.5f);
for (unsigned y = 0; y < dst_samples; ++y) {
int base_src_y = lrintf(center_src_y);
// Now sample <int_radius> pixels on each side around that point.
+ float inv_src_size = 1.0 / float(src_size);
for (int i = 0; i < src_samples; ++i) {
int src_y = base_src_y + i - int_radius;
float weight = lanczos_weight_cached(radius_scaling_factor * (src_y - center_src_y - subpixel_offset));
weights[y * src_samples + i].weight = weight * radius_scaling_factor;
- weights[y * src_samples + i].pos = (src_y + 0.5) / float(src_size);
+ weights[y * src_samples + i].pos = (src_y + 0.5f) * inv_src_size;
}
}
// Our tolerance level for total error is a bit higher than the one for invididual
// samples, since one would assume overall errors in the shape don't matter as much.
const float max_error = 2.0f / (255.0f * 255.0f);
- Tap<fp16_int_t> *bilinear_weights_fp16;
- src_bilinear_samples = combine_many_samples(weights, src_size, src_samples, dst_samples, &bilinear_weights_fp16);
- Tap<float> *bilinear_weights_fp32 = NULL;
- bool fallback_to_fp32 = false;
+ unique_ptr<Tap<fp16_int_t>[]> bilinear_weights_fp16;
+ int src_bilinear_samples = combine_many_samples(weights.get(), src_size, src_samples, dst_samples, &bilinear_weights_fp16);
+ unique_ptr<Tap<float>[]> bilinear_weights_fp32 = NULL;
double max_sum_sq_error_fp16 = 0.0;
for (unsigned y = 0; y < dst_samples; ++y) {
double sum_sq_error_fp16 = compute_sum_sq_error(
- weights + y * src_samples, src_samples,
- bilinear_weights_fp16 + y * src_bilinear_samples, src_bilinear_samples,
+ weights.get() + y * src_samples, src_samples,
+ bilinear_weights_fp16.get() + y * src_bilinear_samples, src_bilinear_samples,
src_size);
max_sum_sq_error_fp16 = std::max(max_sum_sq_error_fp16, sum_sq_error_fp16);
if (max_sum_sq_error_fp16 > max_error) {
}
if (max_sum_sq_error_fp16 > max_error) {
- fallback_to_fp32 = true;
- src_bilinear_samples = combine_many_samples(weights, src_size, src_samples, dst_samples, &bilinear_weights_fp32);
- }
-
- // Encode as a two-component texture. Note the GL_REPEAT.
- glActiveTexture(GL_TEXTURE0 + *sampler_num);
- check_error();
- glBindTexture(GL_TEXTURE_2D, texnum);
- check_error();
- if (last_texture_width == -1) {
- // Need to set this state the first time.
- glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
- check_error();
- glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT);
- check_error();
- glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT);
- check_error();
- }
-
- GLenum type, internal_format;
- void *pixels;
- if (fallback_to_fp32) {
- type = GL_FLOAT;
- internal_format = GL_RG32F;
- pixels = bilinear_weights_fp32;
- } else {
- type = GL_HALF_FLOAT;
- internal_format = GL_RG16F;
- pixels = bilinear_weights_fp16;
+ bilinear_weights_fp16.reset();
+ src_bilinear_samples = combine_many_samples(weights.get(), src_size, src_samples, dst_samples, &bilinear_weights_fp32);
}
- if (int(src_bilinear_samples) == last_texture_width &&
- int(dst_samples) == last_texture_height &&
- internal_format == last_texture_internal_format) {
- // Texture dimensions and type are unchanged; it is more efficient
- // to just update it rather than making an entirely new texture.
- glTexSubImage2D(GL_TEXTURE_2D, 0, 0, 0, src_bilinear_samples, dst_samples, GL_RG, type, pixels);
- } else {
- glTexImage2D(GL_TEXTURE_2D, 0, internal_format, src_bilinear_samples, dst_samples, 0, GL_RG, type, pixels);
- last_texture_width = src_bilinear_samples;
- last_texture_height = dst_samples;
- last_texture_internal_format = internal_format;
- }
- check_error();
-
- delete[] weights;
- delete[] bilinear_weights_fp16;
- delete[] bilinear_weights_fp32;
+ ScalingWeights ret;
+ ret.src_bilinear_samples = src_bilinear_samples;
+ ret.dst_samples = dst_samples;
+ ret.num_loops = num_loops;
+ ret.bilinear_weights_fp16 = move(bilinear_weights_fp16);
+ ret.bilinear_weights_fp32 = move(bilinear_weights_fp32);
+ return ret;
}
void SingleResamplePassEffect::set_gl_state(GLuint glsl_program_num, const string &prefix, unsigned *sampler_num)
projects / movit / blobdiff