X-Git-Url: https://git.sesse.net/?p=nageru-docs;a=blobdiff_plain;f=futatabi.rst;h=76ee84149f64453784dd06528fbdbd8f38f64989;hp=59a571f5cbcfcf219174c016cf13f35b3dbaf5d5;hb=1eec4ef47957c81d445c4b104e56ba2d8917d267;hpb=d9bd8e3b45e7b989d01a848fc0719340d61aa900

diff --git a/futatabi.rst b/futatabi.rst
index 59a571f..76ee841 100644
--- a/futatabi.rst
+++ b/futatabi.rst
@@ -51,6 +51,113 @@ you also build Futatabi.
 Getting started
 ---------------
 
+Futatabi always pulls data from Nageru over the network; it doesn't support SDI
+input or output. Assuming you have a recent version of Nageru (typically one
+that comes with Futatabi), it is capable of sending all of its cameras as one
+video stream (see :ref:`futatabiformat`), so you can start Futatabi with
+
+  ./futatabi http://path.to.nageru.host/multicam.mp4
+
+If you do not have a running Nageru installation, see :ref:`sampledata`.
+
+Once you are up and connected, Futatabi will start recording all of the frames
+to disk. This process happens continuously for as long as you have disk space,
+even if you are playing something back or editing clips, and the streams are
+displayed in real time in mini-display as they come in. You make replays in
+the form of *clips* (the top list is the clip list), which are then queued into
+the *playlist* (the bottom list). Your end result is a live HTTP stream that
+can be fed back into Nageru as a video input; by default, Futatabi listens
+on port 9096.
+
+Futatabi has the concept of a *workspace*, which defaults to your current
+directory (you can change it with the -d option). This holds all of the
+recorded frames, all metadata about clips, and preferences set from the menus
+(interpolation quality and cue point padding).  If you quit Futatabi and
+restart it (or you go down as the result of a power failure or the likes),
+it will remember all the state and frames for you.
+
+Basic UI operations
+'''''''''''''''''''
+
+Nageru can be operated using either the keyboard and mouse, or using a MIDI
+controller with some help of the mouse. In this section, we will be discussing
+the keyboard and mouse only; see :ref:`midi` for details on using MIDI
+controllers.
+
+A clip in the clip list consists simply of an in and an out point; it represents
+an interval of physical time (although timed to the video clock). A clip in the
+playlist contains the same information plus some playback parameters, in particular
+which camera (stream) to play back.
+
+Clicking the ”Cue in” button, or pressing the A key, will start a new clip in
+the clip list that begins at the current time. Similarly, clicking the ”Cue
+out” button, or pressing the S key, will set the end point for said clip.
+(If you click a button twice, it will overwrite the previous result.)
+Now it is in a state where you can queue it to the play list (mark the camera
+you want to use and click the “Queue” button, or Q on the keyboard) for
+playing, or you can preview them using the “Preview” button (W on the
+keyboard). Previewing can be done either from the clip list the clip list or
+the playlist; they will not be interpolated or faded, but will be played back
+in the right
+
+You can edit cue points, both in the clip and the playlist, in two ways:
+Either use the scroll wheel on the mouse, or hold down the left mouse button
+and scrub left or right. (You can hold down Shift to change ten times as fast,
+or Alt to change at one-tenth the speed.) You'll see the new cue points as you
+change them in the preview window. You can also give clips names; these don't
+mean anything, but can be good references to locate a specific kind of clip
+for later use. Once you're happy with a playlist, and your producer is ready
+to cut to your channel, click on the first clip you want to play back and
+click the “Play” button (space on the keyboard); the result will both be
+visible in the top screen and go out live over the network to Nageru.
+
+On top of these basics, there are many possible workflows; we'll discuss only
+two. Try out a few and see which ones fit your style and type of event.
+
+Repeated cue-in
+'''''''''''''''
+
+In many sports, you don't necessarily know when a replay-worthy event has happened
+before it's already happened. However, you may reasonably know when something is
+*not* happening, and it would be a good time to start a clip if something is happening
+immediately afterwards. At these points, you can make repeated cue-ins, ie., start
+a clip without finishing it. As long as you keep making cue-ins, the previous one
+will be discarded. Once you see that something *is* happening, you can wait until
+it's done, and then do a cue-out, which gives you a good clip immediately.
+
+For instance, in a basketball game, you could be seeing a series of uninteresting
+passes, clicking cue-in on each of them. However, once it looks like there's an
+opportunity for a score, you can hold and see what happens; if the shot happens,
+you can click cue-out, and if not, you can go back.
+
+Before playing the clip, you can make adjustments to the in and out points
+as detailed above. This will help you trim away any uninteresting lead-ups,
+or add more margins for fades. If you consistently find that you have too
+little margin, you can use the *cue point padding* feature (either from the
+command line using *--cue-point-padding*, or set from the menu). If you set
+cue point padding to e.g. two seconds, the cue-in point will automatically be set
+two seconds ago when you cue-in, and the cue-out point will be set two seconds
+into the future when you cue-out.
+
+
+Instant clips
+'''''''''''''
+
+Like the previous section explained how you generally would know the *start*
+of an interesting event (at least if discarding most of the candidates),
+you would be even more sure about the *end* of one. Thus, you can simply wait
+until something interesting has happened, and then click cue-in immediately
+followed by cue-out. This will give you a clip of near zero length, ending
+at the right point. Then, edit this clip to set the starting point as needed,
+and it's ready to play.
+
+Again, you can use the cue point padding feature to your advantage; if so,
+your clips will not be of zero length, but rather of some predefined length
+given by your chosen cue point padding.
+
+
+.. _sampledata:
+
 Sample multicamera data
 '''''''''''''''''''''''
 
@@ -134,6 +241,12 @@ not marked as metadata due to FFmpeg limitations, and as such will show up
 raw in subtitle-enabled players.
 
 
+.. _midi:
+
+Using MIDI controllers
+----------------------
+
+
 Monitoring
 ----------