# Stockfish, a UCI chess playing engine derived from Glaurung 2.1
# Copyright (C) 2004-2008 Tord Romstad (Glaurung author)
# Copyright (C) 2008-2015 Marco Costalba, Joona Kiiski, Tord Romstad
-# Copyright (C) 2015-2016 Marco Costalba, Joona Kiiski, Gary Linscott, Tord Romstad
+# Copyright (C) 2015-2019 Marco Costalba, Joona Kiiski, Gary Linscott, Tord Romstad
#
# Stockfish is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
### Section 1. General Configuration
### ==========================================================================
-### Establish the operating system name
-KERNEL = $(shell uname -s)
-ifeq ($(KERNEL),Linux)
- OS = $(shell uname -o)
-endif
-
### Executable name
+ifeq ($(COMP),mingw)
+EXE = stockfish.exe
+else
EXE = stockfish
+endif
### Installation dir definitions
PREFIX = /usr/local
### Built-in benchmark for pgo-builds
PGOBENCH = ./$(EXE) bench
-### Object files
-OBJS = benchmark.o bitbase.o bitboard.o endgame.o evaluate.o main.o \
- material.o misc.o movegen.o movepick.o pawns.o position.o psqt.o \
- search.o thread.o timeman.o tt.o uci.o ucioption.o syzygy/tbprobe.o
+### Source and object files
+SRCS = benchmark.cpp bitbase.cpp bitboard.cpp endgame.cpp evaluate.cpp main.cpp \
+ material.cpp misc.cpp movegen.cpp movepick.cpp pawns.cpp position.cpp psqt.cpp \
+ search.cpp thread.cpp timeman.cpp tt.cpp uci.cpp ucioption.cpp tune.cpp syzygy/tbprobe.cpp
+
+OBJS = $(notdir $(SRCS:.cpp=.o))
+
+VPATH = syzygy
+
+### Establish the operating system name
+KERNEL = $(shell uname -s)
+ifeq ($(KERNEL),Linux)
+ OS = $(shell uname -o)
+endif
### ==========================================================================
### Section 2. High-level Configuration
### ==========================================================================
#
-# flag --- Comp switch --- Description
+# flag --- Comp switch --- Description
# ----------------------------------------------------------------------------
#
# debug = yes/no --- -DNDEBUG --- Enable/Disable debug mode
-# sanitize = yes/no --- (-fsanitize ) --- enable undefined behavior checks
+# sanitize = undefined/thread/no (-fsanitize )
+# --- ( undefined ) --- enable undefined behavior checks
+# --- ( thread ) --- enable threading error checks
# optimize = yes/no --- (-O3/-fast etc.) --- Enable/Disable optimizations
# arch = (name) --- (-arch) --- Target architecture
# bits = 64/32 --- -DIS_64BIT --- 64-/32-bit operating system
optimize = yes
debug = no
sanitize = no
-bits = 32
+bits = 64
prefetch = no
popcnt = no
sse = no
pext = no
### 2.2 Architecture specific
-
ifeq ($(ARCH),general-32)
arch = any
+ bits = 32
endif
ifeq ($(ARCH),x86-32-old)
arch = i386
+ bits = 32
endif
ifeq ($(ARCH),x86-32)
arch = i386
+ bits = 32
prefetch = yes
sse = yes
endif
ifeq ($(ARCH),general-64)
arch = any
- bits = 64
endif
ifeq ($(ARCH),x86-64)
arch = x86_64
- bits = 64
prefetch = yes
sse = yes
endif
ifeq ($(ARCH),x86-64-modern)
arch = x86_64
- bits = 64
prefetch = yes
popcnt = yes
sse = yes
ifeq ($(ARCH),x86-64-bmi2)
arch = x86_64
- bits = 64
prefetch = yes
popcnt = yes
sse = yes
ifeq ($(ARCH),armv7)
arch = armv7
prefetch = yes
+ bits = 32
+endif
+
+ifeq ($(ARCH),armv8)
+ arch = armv8-a
+ bits = 64
+ prefetch = yes
endif
ifeq ($(ARCH),ppc-32)
arch = ppc
+ bits = 32
endif
ifeq ($(ARCH),ppc-64)
arch = ppc64
- bits = 64
+ popcnt = yes
+ prefetch = yes
endif
-
### ==========================================================================
-### Section 3. Low-level configuration
+### Section 3. Low-level Configuration
### ==========================================================================
### 3.1 Selecting compiler (default = gcc)
-
-CXXFLAGS += -Wall -Wcast-qual -fno-exceptions -fno-rtti -std=c++11 $(EXTRACXXFLAGS)
+CXXFLAGS += -Wall -Wcast-qual -fno-exceptions -std=c++11 $(EXTRACXXFLAGS)
DEPENDFLAGS += -std=c++11
LDFLAGS += $(EXTRALDFLAGS)
CXX=g++
CXXFLAGS += -pedantic -Wextra -Wshadow
- ifeq ($(ARCH),armv7)
+ ifeq ($(ARCH),$(filter $(ARCH),armv7 armv8))
ifeq ($(OS),Android)
CXXFLAGS += -m$(bits)
+ LDFLAGS += -m$(bits)
endif
else
CXXFLAGS += -m$(bits)
+ LDFLAGS += -m$(bits)
endif
ifneq ($(KERNEL),Darwin)
CXX=clang++
CXXFLAGS += -pedantic -Wextra -Wshadow
- ifeq ($(ARCH),armv7)
+ ifneq ($(KERNEL),Darwin)
+ ifneq ($(KERNEL),OpenBSD)
+ LDFLAGS += -latomic
+ endif
+ endif
+
+ ifeq ($(ARCH),$(filter $(ARCH),armv7 armv8))
ifeq ($(OS),Android)
CXXFLAGS += -m$(bits)
LDFLAGS += -m$(bits)
CXXFLAGS += -m$(bits)
LDFLAGS += -m$(bits)
endif
-
- ifeq ($(KERNEL),Darwin)
- CXXFLAGS += -stdlib=libc++
- DEPENDFLAGS += -stdlib=libc++
- endif
endif
ifeq ($(comp),icc)
- profile_prepare = icc-profile-prepare
profile_make = icc-profile-make
profile_use = icc-profile-use
- profile_clean = icc-profile-clean
else
- profile_prepare = gcc-profile-prepare
+ifeq ($(comp),clang)
+ profile_make = clang-profile-make
+ profile_use = clang-profile-use
+else
profile_make = gcc-profile-make
profile_use = gcc-profile-use
- profile_clean = gcc-profile-clean
+endif
endif
ifeq ($(KERNEL),Darwin)
endif
### 3.2.2 Debugging with undefined behavior sanitizers
-ifeq ($(sanitize),yes)
- CXXFLAGS += -g3 -fsanitize=undefined
+ifneq ($(sanitize),no)
+ CXXFLAGS += -g3 -fsanitize=$(sanitize) -fuse-ld=gold
+ LDFLAGS += -fsanitize=$(sanitize) -fuse-ld=gold
endif
### 3.3 Optimization
CXXFLAGS += -O3
ifeq ($(comp),gcc)
-
- ifeq ($(KERNEL),Darwin)
- ifeq ($(arch),i386)
- CXXFLAGS += -mdynamic-no-pic
- endif
- ifeq ($(arch),x86_64)
- CXXFLAGS += -mdynamic-no-pic
- endif
- endif
-
ifeq ($(OS), Android)
CXXFLAGS += -fno-gcse -mthumb -march=armv7-a -mfloat-abi=softfp
endif
endif
- ifeq ($(comp),icc)
+ ifeq ($(comp),$(filter $(comp),gcc clang icc))
ifeq ($(KERNEL),Darwin)
CXXFLAGS += -mdynamic-no-pic
endif
endif
-
- ifeq ($(comp),clang)
- ifeq ($(KERNEL),Darwin)
- ifeq ($(pext),no)
- CXXFLAGS += -flto
- LDFLAGS += $(CXXFLAGS)
- endif
- ifeq ($(arch),i386)
- CXXFLAGS += -mdynamic-no-pic
- endif
- ifeq ($(arch),x86_64)
- CXXFLAGS += -mdynamic-no-pic
- endif
- endif
- endif
endif
### 3.4 Bits
### 3.6 popcnt
ifeq ($(popcnt),yes)
- ifeq ($(comp),icc)
+ ifeq ($(arch),ppc64)
+ CXXFLAGS += -DUSE_POPCNT
+ else ifeq ($(comp),icc)
CXXFLAGS += -msse3 -DUSE_POPCNT
else
CXXFLAGS += -msse3 -mpopcnt -DUSE_POPCNT
ifeq ($(pext),yes)
CXXFLAGS += -DUSE_PEXT
ifeq ($(comp),$(filter $(comp),gcc clang mingw))
- CXXFLAGS += -mbmi2
+ CXXFLAGS += -msse4 -mbmi2
endif
endif
-### 3.8 Link Time Optimization, it works since gcc 4.5 but not on mingw under Windows.
+### 3.8 Link Time Optimization
### This is a mix of compile and link time options because the lto link phase
### needs access to the optimization flags.
-ifeq ($(comp),gcc)
- ifeq ($(optimize),yes)
- ifeq ($(debug),no)
+ifeq ($(optimize),yes)
+ifeq ($(debug), no)
+ ifeq ($(comp),$(filter $(comp),gcc clang mingw))
CXXFLAGS += -flto
LDFLAGS += $(CXXFLAGS)
endif
- endif
endif
-
-ifeq ($(comp),mingw)
- ifeq ($(KERNEL),Linux)
- ifeq ($(optimize),yes)
- ifeq ($(debug),no)
- CXXFLAGS += -flto
- LDFLAGS += $(CXXFLAGS)
- endif
- endif
- endif
endif
### 3.9 Android 5 can only run position independent executables. Note that this
LDFLAGS += -fPIE -pie
endif
-
### ==========================================================================
-### Section 4. Public targets
+### Section 4. Public Targets
### ==========================================================================
help:
@echo ""
@echo "Supported archs:"
@echo ""
- @echo "x86-64 > x86 64-bit"
- @echo "x86-64-modern > x86 64-bit with popcnt support"
- @echo "x86-64-bmi2 > x86 64-bit with pext support"
- @echo "x86-32 > x86 32-bit with SSE support"
+ @echo "x86-64-bmi2 > x86 64-bit with pext support (also enables SSE4)"
+ @echo "x86-64-modern > x86 64-bit with popcnt support (also enables SSE3)"
+ @echo "x86-64 > x86 64-bit generic"
+ @echo "x86-32 > x86 32-bit (also enables SSE)"
@echo "x86-32-old > x86 32-bit fall back for old hardware"
@echo "ppc-64 > PPC 64-bit"
@echo "ppc-32 > PPC 32-bit"
@echo "armv7 > ARMv7 32-bit"
+ @echo "armv8 > ARMv8 64-bit"
@echo "general-64 > unspecified 64-bit"
@echo "general-32 > unspecified 32-bit"
@echo ""
@echo "Advanced examples, for experienced users: "
@echo ""
@echo "make build ARCH=x86-64 COMP=clang"
- @echo "make profile-build ARCH=x86-64-modern COMP=gcc COMPCXX=g++-4.8"
+ @echo "make profile-build ARCH=x86-64-bmi2 COMP=gcc COMPCXX=g++-4.8"
@echo ""
-.PHONY: build profile-build
-build:
- $(MAKE) ARCH=$(ARCH) COMP=$(COMP) config-sanity
+.PHONY: help build profile-build strip install clean objclean profileclean \
+ config-sanity icc-profile-use icc-profile-make gcc-profile-use gcc-profile-make \
+ clang-profile-use clang-profile-make
+
+build: config-sanity
$(MAKE) ARCH=$(ARCH) COMP=$(COMP) all
-profile-build:
- $(MAKE) ARCH=$(ARCH) COMP=$(COMP) config-sanity
- @echo ""
- @echo "Step 0/4. Preparing for profile build."
- $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_prepare)
+profile-build: config-sanity objclean profileclean
@echo ""
- @echo "Step 1/4. Building executable for benchmark ..."
- @touch *.cpp *.h syzygy/*.cpp syzygy/*.h
+ @echo "Step 1/4. Building instrumented executable ..."
$(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_make)
@echo ""
@echo "Step 2/4. Running benchmark for pgo-build ..."
$(PGOBENCH) > /dev/null
@echo ""
- @echo "Step 3/4. Building final executable ..."
- @touch *.cpp *.h syzygy/*.cpp syzygy/*.h
+ @echo "Step 3/4. Building optimized executable ..."
+ $(MAKE) ARCH=$(ARCH) COMP=$(COMP) objclean
$(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_use)
@echo ""
@echo "Step 4/4. Deleting profile data ..."
- $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_clean)
+ $(MAKE) ARCH=$(ARCH) COMP=$(COMP) profileclean
strip:
strip $(EXE)
-cp $(EXE) $(BINDIR)
-strip $(BINDIR)/$(EXE)
-clean:
- $(RM) $(EXE) $(EXE).exe *.o .depend *~ core bench.txt *.gcda ./syzygy/*.o ./syzygy/*.gcda
+#clean all
+clean: objclean profileclean
+ @rm -f .depend *~ core
+
+# clean binaries and objects
+objclean:
+ @rm -f $(EXE) *.o ./syzygy/*.o
+
+# clean auxiliary profiling files
+profileclean:
+ @rm -rf profdir
+ @rm -f bench.txt *.gcda *.gcno
+ @rm -f stockfish.profdata *.profraw
default:
help
### ==========================================================================
-### Section 5. Private targets
+### Section 5. Private Targets
### ==========================================================================
all: $(EXE) .depend
@echo ""
@echo "Config:"
@echo "debug: '$(debug)'"
+ @echo "sanitize: '$(sanitize)'"
@echo "optimize: '$(optimize)'"
@echo "arch: '$(arch)'"
@echo "bits: '$(bits)'"
@echo "Testing config sanity. If this fails, try 'make help' ..."
@echo ""
@test "$(debug)" = "yes" || test "$(debug)" = "no"
+ @test "$(sanitize)" = "undefined" || test "$(sanitize)" = "thread" || test "$(sanitize)" = "address" || test "$(sanitize)" = "no"
@test "$(optimize)" = "yes" || test "$(optimize)" = "no"
@test "$(arch)" = "any" || test "$(arch)" = "x86_64" || test "$(arch)" = "i386" || \
- test "$(arch)" = "ppc64" || test "$(arch)" = "ppc" || test "$(arch)" = "armv7"
+ test "$(arch)" = "ppc64" || test "$(arch)" = "ppc" || \
+ test "$(arch)" = "armv7" || test "$(arch)" = "armv8-a"
@test "$(bits)" = "32" || test "$(bits)" = "64"
@test "$(prefetch)" = "yes" || test "$(prefetch)" = "no"
@test "$(popcnt)" = "yes" || test "$(popcnt)" = "no"
$(EXE): $(OBJS)
$(CXX) -o $@ $(OBJS) $(LDFLAGS)
-gcc-profile-prepare:
- $(MAKE) ARCH=$(ARCH) COMP=$(COMP) gcc-profile-clean
+clang-profile-make:
+ $(MAKE) ARCH=$(ARCH) COMP=$(COMP) \
+ EXTRACXXFLAGS='-fprofile-instr-generate ' \
+ EXTRALDFLAGS=' -fprofile-instr-generate' \
+ all
+
+clang-profile-use:
+ llvm-profdata merge -output=stockfish.profdata *.profraw
+ $(MAKE) ARCH=$(ARCH) COMP=$(COMP) \
+ EXTRACXXFLAGS='-fprofile-instr-use=stockfish.profdata' \
+ EXTRALDFLAGS='-fprofile-use ' \
+ all
gcc-profile-make:
$(MAKE) ARCH=$(ARCH) COMP=$(COMP) \
EXTRALDFLAGS='-lgcov' \
all
-gcc-profile-clean:
- @rm -rf *.gcda *.gcno syzygy/*.gcda syzygy/*.gcno bench.txt
-
-icc-profile-prepare:
- $(MAKE) ARCH=$(ARCH) COMP=$(COMP) icc-profile-clean
- @mkdir profdir
-
icc-profile-make:
+ @mkdir -p profdir
$(MAKE) ARCH=$(ARCH) COMP=$(COMP) \
EXTRACXXFLAGS='-prof-gen=srcpos -prof_dir ./profdir' \
all
EXTRACXXFLAGS='-prof_use -prof_dir ./profdir' \
all
-icc-profile-clean:
- @rm -rf profdir bench.txt
-
.depend:
- -@$(CXX) $(DEPENDFLAGS) -MM $(OBJS:.o=.cpp) > $@ 2> /dev/null
+ -@$(CXX) $(DEPENDFLAGS) -MM $(SRCS) > $@ 2> /dev/null
-include .depend
-
projects / stockfish / blobdiff