X-Git-Url: https://git.sesse.net/?p=stockfish;a=blobdiff_plain;f=src%2FMakefile;h=8622be3206291abd014304d14007049e762bbcd2;hp=843d45fc89aeb64093cdf992c44a94f6150bdc85;hb=cb2111f0b62afec5fd977e1dd4ca5843bd006956;hpb=0b2794ae1257b224256ac0c6392a705cfc80a848

diff --git a/src/Makefile b/src/Makefile
index 843d45fc..8622be32 100644
--- a/src/Makefile
+++ b/src/Makefile
@@ -1,6 +1,6 @@
 # Stockfish, a UCI chess playing engine derived from Glaurung 2.1
 # Copyright (C) 2004-2008 Tord Romstad (Glaurung author)
-# Copyright (C) 2008-2014 Marco Costalba, Joona Kiiski, Tord Romstad
+# Copyright (C) 2008-2015 Marco Costalba, Joona Kiiski, Tord Romstad
 #
 # Stockfish is free software: you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -28,20 +28,15 @@ EXE = stockfish
 
 ### Installation dir definitions
 PREFIX = /usr/local
-# Haiku has a non-standard filesystem layout
-ifeq ($(UNAME),Haiku)
-	PREFIX=/boot/common
-endif
 BINDIR = $(PREFIX)/bin
 
-### Built-in benchmark for pgo-builds and signature
-PGOBENCH = ./$(EXE) bench 32 1 1 default time
-SIGNBENCH = ./$(EXE) bench
+### Built-in benchmark for pgo-builds
+PGOBENCH = ./$(EXE) bench 16 1 1000 default time
 
 ### Object files
-OBJS = benchmark.o bitbase.o bitboard.o book.o endgame.o evaluate.o main.o \
-	material.o misc.o movegen.o movepick.o notation.o pawns.o position.o \
-	search.o thread.o timeman.o tt.o uci.o ucioption.o
+OBJS = benchmark.o bitbase.o bitboard.o endgame.o evaluate.o main.o \
+	material.o misc.o movegen.o movepick.o pawns.o position.o \
+	search.o thread.o timeman.o tt.o uci.o ucioption.o syzygy/tbprobe.o
 
 ### ==========================================================================
 ### Section 2. High-level Configuration
@@ -53,7 +48,6 @@ OBJS = benchmark.o bitbase.o bitboard.o book.o endgame.o evaluate.o main.o \
 # debug = yes/no      --- -DNDEBUG         --- Enable/Disable debug mode
 # optimize = yes/no   --- (-O3/-fast etc.) --- Enable/Disable optimizations
 # arch = (name)       --- (-arch)          --- Target architecture
-# os = (name)         ---                  --- Target operating system
 # bits = 64/32        --- -DIS_64BIT       --- 64-/32-bit operating system
 # prefetch = yes/no   --- -DUSE_PREFETCH   --- Use prefetch x86 asm-instruction
 # bsfq = yes/no       --- -DUSE_BSFQ       --- Use bsfq x86_64 asm-instruction (only
@@ -69,7 +63,6 @@ OBJS = benchmark.o bitbase.o bitboard.o book.o endgame.o evaluate.o main.o \
 ### 2.1. General and architecture defaults
 optimize = yes
 debug = no
-os = any
 bits = 32
 prefetch = no
 bsfq = no
@@ -131,50 +124,15 @@ ifeq ($(ARCH),armv7)
 	bsfq = yes
 endif
 
-ifeq ($(ARCH),osx-ppc-32)
+ifeq ($(ARCH),ppc-32)
 	arch = ppc
-	os = osx
-endif
-
-ifeq ($(ARCH),osx-ppc-64)
-	arch = ppc64
-	os = osx
-	bits = 64
 endif
 
-ifeq ($(ARCH),linux-ppc-64)
+ifeq ($(ARCH),ppc-64)
 	arch = ppc64
 	bits = 64
 endif
 
-ifeq ($(ARCH),osx-x86-64)
-	arch = x86_64
-	os = osx
-	bits = 64
-	prefetch = yes
-	bsfq = yes
-	sse = yes
-endif
-
-ifeq ($(ARCH),osx-x86-64-modern)
-	arch = x86_64
-	os = osx
-	bits = 64
-	prefetch = yes
-	bsfq = yes
-	popcnt = yes
-	sse = yes
-endif
-
-ifeq ($(ARCH),osx-x86-32)
-	arch = i386
-	os = osx
-	prefetch = yes
-	bsfq = no
-	popcnt = no
-	sse = yes
-endif
-
 
 ### ==========================================================================
 ### Section 3. Low-level configuration
@@ -182,7 +140,7 @@ endif
 
 ### 3.1 Selecting compiler (default = gcc)
 
-CXXFLAGS += -Wall -Wcast-qual -fno-exceptions -fno-rtti $(EXTRACXXFLAGS)
+CXXFLAGS += -Wall -Wcast-qual -fno-exceptions -fno-rtti -std=c++11 $(EXTRACXXFLAGS)
 LDFLAGS += $(EXTRALDFLAGS)
 
 ifeq ($(COMP),)
@@ -192,7 +150,8 @@ endif
 ifeq ($(COMP),gcc)
 	comp=gcc
 	CXX=g++
-	CXXFLAGS += -ansi -pedantic -Wno-long-long -Wextra -Wshadow
+	CXXFLAGS += -pedantic -Wno-long-long -Wextra -Wshadow
+	LDFLAGS += -Wl,--no-as-needed
 endif
 
 ifeq ($(COMP),mingw)
@@ -211,7 +170,10 @@ endif
 ifeq ($(COMP),clang)
 	comp=clang
 	CXX=clang++
-	CXXFLAGS += -ansi -pedantic -Wno-long-long -Wextra -Wshadow
+	CXXFLAGS += -pedantic -Wno-long-long -Wextra -Wshadow
+	ifeq ($(UNAME),Darwin)
+		CXXFLAGS += -std=c++0x -stdlib=libc++
+	endif
 endif
 
 ifeq ($(comp),icc)
@@ -226,9 +188,9 @@ else
 	profile_clean = gcc-profile-clean
 endif
 
-ifeq ($(os),osx)
-	CXXFLAGS += -arch $(arch) -mmacosx-version-min=10.6
-	LDFLAGS += -arch $(arch) -mmacosx-version-min=10.6
+ifeq ($(UNAME),Darwin)
+	CXXFLAGS += -arch $(arch) -mmacosx-version-min=10.10
+	LDFLAGS += -arch $(arch) -mmacosx-version-min=10.10
 endif
 
 ### On mingw use Windows threads, otherwise POSIX
@@ -255,7 +217,7 @@ ifeq ($(optimize),yes)
 	ifeq ($(comp),gcc)
 		CXXFLAGS += -O3
 
-		ifeq ($(os),osx)
+		ifeq ($(UNAME),Darwin)
 			ifeq ($(arch),i386)
 				CXXFLAGS += -mdynamic-no-pic
 			endif
@@ -274,7 +236,7 @@ ifeq ($(optimize),yes)
 	endif
 
 	ifeq ($(comp),icc)
-		ifeq ($(os),osx)
+		ifeq ($(UNAME),Darwin)
 			CXXFLAGS += -fast -mdynamic-no-pic
 		else
 			CXXFLAGS += -fast
@@ -284,8 +246,11 @@ ifeq ($(optimize),yes)
 	ifeq ($(comp),clang)
 		CXXFLAGS += -O3
 
-		ifeq ($(os),osx)
-			CXXFLAGS += -flto
+		ifeq ($(UNAME),Darwin)
+			ifeq ($(pext),no)
+				CXXFLAGS += -flto
+				LDFLAGS += $(CXXFLAGS)
+			endif
 			ifeq ($(arch),i386)
 				CXXFLAGS += -mdynamic-no-pic
 			endif
@@ -318,14 +283,18 @@ endif
 
 ### 3.9 popcnt
 ifeq ($(popcnt),yes)
-	CXXFLAGS += -msse3 -DUSE_POPCNT
+	ifeq ($(comp),icc)
+		CXXFLAGS += -msse3 -DUSE_POPCNT
+	else
+		CXXFLAGS += -msse3 -mpopcnt -DUSE_POPCNT
+	endif
 endif
 
 ### 3.10 pext
 ifeq ($(pext),yes)
 	CXXFLAGS += -DUSE_PEXT
 	ifeq ($(comp),$(filter $(comp),gcc clang mingw))
-		CXXFLAGS += -mbmi2
+		CXXFLAGS += -mbmi -mbmi2
 	endif
 endif
 
@@ -345,6 +314,14 @@ ifeq ($(comp),gcc)
 	endif
 endif
 
+### 3.12 Android 5 can only run position independent executables. Note that this
+### breaks Android 4.0 and earlier.
+ifeq ($(arch),armv7)
+	CXXFLAGS += -fPIE
+	LDFLAGS += -fPIE -pie
+endif
+
+
 ### ==========================================================================
 ### Section 4. Public targets
 ### ==========================================================================
@@ -370,13 +347,9 @@ help:
 	@echo "x86-64-bmi2             > x86 64-bit with pext support"
 	@echo "x86-32                  > x86 32-bit with SSE support"
 	@echo "x86-32-old              > x86 32-bit fall back for old hardware"
-	@echo "linux-ppc-64            > PPC-Linux 64 bit"
-	@echo "osx-ppc-64              > PPC-Mac OS X 64 bit"
-	@echo "osx-ppc-32              > PPC-Mac OS X 32 bit"
-	@echo "osx-x86-64-modern       > x86-Mac OS X 64 bit with popcnt support"
-	@echo "osx-x86-64              > x86-Mac OS X 64 bit"
-	@echo "osx-x86-32              > x86-Mac OS X 32 bit"
-	@echo "armv7                   > ARMv7 32 bit"
+	@echo "ppc-64                  > PPC 64-bit"
+	@echo "ppc-32                  > PPC 32-bit"
+	@echo "armv7                   > ARMv7 32-bit"
 	@echo "general-64              > unspecified 64-bit"
 	@echo "general-32              > unspecified 32-bit"
 	@echo ""
@@ -387,10 +360,6 @@ help:
 	@echo "clang                   > LLVM Clang compiler"
 	@echo "icc                     > Intel compiler"
 	@echo ""
-	@echo "Non-standard targets:"
-	@echo ""
-	@echo "make hpux               >  Compile for HP-UX. Compiler = aCC"
-	@echo ""
 	@echo "Examples. If you don't know what to do, you likely want to run: "
 	@echo ""
 	@echo "make build ARCH=x86-64    (This is for 64-bit systems)"
@@ -409,14 +378,14 @@ profile-build:
 	$(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_prepare)
 	@echo ""
 	@echo "Step 1/4. Building executable for benchmark ..."
-	@touch *.cpp *.h
+	@touch *.cpp *.h syzygy/*.cpp syzygy/*.h
 	$(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_make)
 	@echo ""
 	@echo "Step 2/4. Running benchmark for pgo-build ..."
 	@$(PGOBENCH) > /dev/null
 	@echo ""
 	@echo "Step 3/4. Building final executable ..."
-	@touch *.cpp
+	@touch *.cpp *.h syzygy/*.cpp syzygy/*.h
 	$(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_use)
 	@echo ""
 	@echo "Step 4/4. Deleting profile data ..."
@@ -431,7 +400,7 @@ install:
 	-strip $(BINDIR)/$(EXE)
 
 clean:
-	$(RM) $(EXE) $(EXE).exe *.o .depend *~ core bench.txt *.gcda
+	$(RM) $(EXE) $(EXE).exe *.o .depend *~ core bench.txt *.gcda ./syzygy/*.o ./syzygy/*.gcda
 
 default:
 	help
@@ -448,7 +417,6 @@ config-sanity:
 	@echo "debug: '$(debug)'"
 	@echo "optimize: '$(optimize)'"
 	@echo "arch: '$(arch)'"
-	@echo "os: '$(os)'"
 	@echo "bits: '$(bits)'"
 	@echo "prefetch: '$(prefetch)'"
 	@echo "bsfq: '$(bsfq)'"
@@ -467,7 +435,6 @@ config-sanity:
 	@test "$(optimize)" = "yes" || test "$(optimize)" = "no"
 	@test "$(arch)" = "any" || test "$(arch)" = "x86_64" || test "$(arch)" = "i386" || \
 	 test "$(arch)" = "ppc64" || test "$(arch)" = "ppc" || test "$(arch)" = "armv7"
-	@test "$(os)" = "any" || test "$(os)" = "osx"
 	@test "$(bits)" = "32" || test "$(bits)" = "64"
 	@test "$(prefetch)" = "yes" || test "$(prefetch)" = "no"
 	@test "$(bsfq)" = "yes" || test "$(bsfq)" = "no"
@@ -490,12 +457,12 @@ gcc-profile-make:
 
 gcc-profile-use:
 	$(MAKE) ARCH=$(ARCH) COMP=$(COMP) \
-	EXTRACXXFLAGS='-fprofile-use' \
+	EXTRACXXFLAGS='-fprofile-use -fno-peel-loops -fno-tracer' \
 	EXTRALDFLAGS='-lgcov' \
 	all
 
 gcc-profile-clean:
-	@rm -rf *.gcda *.gcno bench.txt
+	@rm -rf *.gcda *.gcno syzygy/*.gcda syzygy/*.gcno bench.txt
 
 icc-profile-prepare:
 	$(MAKE) ARCH=$(ARCH) COMP=$(COMP) icc-profile-clean
@@ -519,15 +486,3 @@ icc-profile-clean:
 
 -include .depend
 
-
-### ==========================================================================
-### Section 6. Non-standard targets
-### ==========================================================================
-
-hpux:
-	$(MAKE) \
-	CXX='/opt/aCC/bin/aCC -AA +hpxstd98 -mt +O3 -DNDEBUG -DNO_PREFETCH' \
-	CXXFLAGS="" \
-	LDFLAGS="" \
-	all
-