X-Git-Url: https://git.sesse.net/?p=stockfish;a=blobdiff_plain;f=src%2FMakefile;h=ab317e1055f89ec48fcb506b2ebe2bd22b81108e;hp=cdedd25d0da4cb5747594ffd17ec4efad4759067;hb=5d7ad47c198c54e7a91876a6d8d8488a0c23a1ba;hpb=bf51b4796abd400648ba751fe545fd1785232a6b diff --git a/src/Makefile b/src/Makefile index cdedd25d..ab317e10 100644 --- a/src/Makefile +++ b/src/Makefile @@ -1,7 +1,7 @@ # Stockfish, a UCI chess playing engine derived from Glaurung 2.1 # Copyright (C) 2004-2008 Tord Romstad (Glaurung author) # Copyright (C) 2008-2015 Marco Costalba, Joona Kiiski, Tord Romstad -# Copyright (C) 2015-2016 Marco Costalba, Joona Kiiski, Gary Linscott, Tord Romstad +# Copyright (C) 2015-2019 Marco Costalba, Joona Kiiski, Gary Linscott, Tord Romstad # # Stockfish is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -21,14 +21,12 @@ ### Section 1. General Configuration ### ========================================================================== -### Establish the operating system name -KERNEL = $(shell uname -s) -ifeq ($(KERNEL),Linux) - OS = $(shell uname -o) -endif - ### Executable name +ifeq ($(COMP),mingw) +EXE = stockfish.exe +else EXE = stockfish +endif ### Installation dir definitions PREFIX = /usr/local @@ -40,7 +38,15 @@ PGOBENCH = ./$(EXE) bench ### Object files OBJS = benchmark.o bitbase.o bitboard.o endgame.o evaluate.o main.o \ material.o misc.o movegen.o movepick.o pawns.o position.o psqt.o \ - search.o thread.o timeman.o tt.o uci.o ucioption.o syzygy/tbprobe.o + search.o thread.o timeman.o tt.o uci.o ucioption.o syzygy/tbprobe.o \ + hashprobe.grpc.pb.o hashprobe.pb.o +CLIOBJS = client.o hashprobe.grpc.pb.o hashprobe.pb.o + +### Establish the operating system name +KERNEL = $(shell uname -s) +ifeq ($(KERNEL),Linux) + OS = $(shell uname -o) +endif ### ========================================================================== ### Section 2. High-level Configuration @@ -50,7 +56,9 @@ OBJS = benchmark.o bitbase.o bitboard.o endgame.o evaluate.o main.o \ # ---------------------------------------------------------------------------- # # debug = yes/no --- -DNDEBUG --- Enable/Disable debug mode -# sanitize = yes/no --- (-fsanitize ) --- enable undefined behavior checks +# sanitize = undefined/thread/no (-fsanitize ) +# --- ( undefined ) --- enable undefined behavior checks +# --- ( thread ) --- enable threading error checks # optimize = yes/no --- (-O3/-fast etc.) --- Enable/Disable optimizations # arch = (name) --- (-arch) --- Target architecture # bits = 64/32 --- -DIS_64BIT --- 64-/32-bit operating system @@ -139,7 +147,7 @@ endif ### 3.1 Selecting compiler (default = gcc) -CXXFLAGS += -Wall -Wcast-qual -fno-exceptions -fno-rtti -std=c++11 $(EXTRACXXFLAGS) +CXXFLAGS += -Wall -Wcast-qual -fno-exceptions -std=c++11 $(EXTRACXXFLAGS) DEPENDFLAGS += -std=c++11 LDFLAGS += $(EXTRALDFLAGS) @@ -155,9 +163,11 @@ ifeq ($(COMP),gcc) ifeq ($(ARCH),armv7) ifeq ($(OS),Android) CXXFLAGS += -m$(bits) + LDFLAGS += -m$(bits) endif else CXXFLAGS += -m$(bits) + LDFLAGS += -m$(bits) endif ifneq ($(KERNEL),Darwin) @@ -201,6 +211,12 @@ ifeq ($(COMP),clang) CXX=clang++ CXXFLAGS += -pedantic -Wextra -Wshadow + ifneq ($(KERNEL),Darwin) + ifneq ($(KERNEL),OpenBSD) + LDFLAGS += -latomic + endif + endif + ifeq ($(ARCH),armv7) ifeq ($(OS),Android) CXXFLAGS += -m$(bits) @@ -210,23 +226,19 @@ ifeq ($(COMP),clang) CXXFLAGS += -m$(bits) LDFLAGS += -m$(bits) endif - - ifeq ($(KERNEL),Darwin) - CXXFLAGS += -stdlib=libc++ - DEPENDFLAGS += -stdlib=libc++ - endif endif ifeq ($(comp),icc) - profile_prepare = icc-profile-prepare profile_make = icc-profile-make profile_use = icc-profile-use - profile_clean = icc-profile-clean else - profile_prepare = gcc-profile-prepare +ifeq ($(comp),clang) + profile_make = clang-profile-make + profile_use = clang-profile-use +else profile_make = gcc-profile-make profile_use = gcc-profile-use - profile_clean = gcc-profile-clean +endif endif ifeq ($(KERNEL),Darwin) @@ -263,8 +275,9 @@ else endif ### 3.2.2 Debugging with undefined behavior sanitizers -ifeq ($(sanitize),yes) - CXXFLAGS += -g3 -fsanitize=undefined +ifneq ($(sanitize),no) + CXXFLAGS += -g3 -fsanitize=$(sanitize) -fuse-ld=gold + LDFLAGS += -fsanitize=$(sanitize) -fuse-ld=gold endif ### 3.3 Optimization @@ -273,41 +286,16 @@ ifeq ($(optimize),yes) CXXFLAGS += -O3 ifeq ($(comp),gcc) - - ifeq ($(KERNEL),Darwin) - ifeq ($(arch),i386) - CXXFLAGS += -mdynamic-no-pic - endif - ifeq ($(arch),x86_64) - CXXFLAGS += -mdynamic-no-pic - endif - endif - ifeq ($(OS), Android) CXXFLAGS += -fno-gcse -mthumb -march=armv7-a -mfloat-abi=softfp endif endif - - ifeq ($(comp),icc) + + ifeq ($(comp),$(filter $(comp),gcc clang icc)) ifeq ($(KERNEL),Darwin) CXXFLAGS += -mdynamic-no-pic endif endif - - ifeq ($(comp),clang) - ifeq ($(KERNEL),Darwin) - ifeq ($(pext),no) - CXXFLAGS += -flto - LDFLAGS += $(CXXFLAGS) - endif - ifeq ($(arch),i386) - CXXFLAGS += -mdynamic-no-pic - endif - ifeq ($(arch),x86_64) - CXXFLAGS += -mdynamic-no-pic - endif - endif - endif endif ### 3.4 Bits @@ -345,24 +333,20 @@ endif ### 3.8 Link Time Optimization, it works since gcc 4.5 but not on mingw under Windows. ### This is a mix of compile and link time options because the lto link phase ### needs access to the optimization flags. -ifeq ($(comp),gcc) - ifeq ($(optimize),yes) - ifeq ($(debug),no) +ifeq ($(optimize),yes) +ifeq ($(debug), no) + ifeq ($(comp),$(filter $(comp),gcc clang)) CXXFLAGS += -flto LDFLAGS += $(CXXFLAGS) endif - endif -endif -ifeq ($(comp),mingw) + ifeq ($(comp),mingw) ifeq ($(KERNEL),Linux) - ifeq ($(optimize),yes) - ifeq ($(debug),no) CXXFLAGS += -flto LDFLAGS += $(CXXFLAGS) endif endif - endif +endif endif ### 3.9 Android 5 can only run position independent executables. Note that this @@ -423,30 +407,27 @@ help: @echo "" -.PHONY: build profile-build -build: - $(MAKE) ARCH=$(ARCH) COMP=$(COMP) config-sanity +.PHONY: help build profile-build strip install clean objclean profileclean help \ + config-sanity icc-profile-use icc-profile-make gcc-profile-use gcc-profile-make \ + clang-profile-use clang-profile-make + +build: config-sanity $(MAKE) ARCH=$(ARCH) COMP=$(COMP) all -profile-build: - $(MAKE) ARCH=$(ARCH) COMP=$(COMP) config-sanity +profile-build: config-sanity objclean profileclean @echo "" - @echo "Step 0/4. Preparing for profile build." - $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_prepare) - @echo "" - @echo "Step 1/4. Building executable for benchmark ..." - @touch *.cpp *.h syzygy/*.cpp syzygy/*.h + @echo "Step 1/4. Building instrumented executable ..." $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_make) @echo "" @echo "Step 2/4. Running benchmark for pgo-build ..." $(PGOBENCH) > /dev/null @echo "" - @echo "Step 3/4. Building final executable ..." - @touch *.cpp *.h syzygy/*.cpp syzygy/*.h + @echo "Step 3/4. Building optimized executable ..." + $(MAKE) ARCH=$(ARCH) COMP=$(COMP) objclean $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_use) @echo "" @echo "Step 4/4. Deleting profile data ..." - $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_clean) + $(MAKE) ARCH=$(ARCH) COMP=$(COMP) profileclean strip: strip $(EXE) @@ -456,8 +437,19 @@ install: -cp $(EXE) $(BINDIR) -strip $(BINDIR)/$(EXE) -clean: - $(RM) $(EXE) $(EXE).exe *.o .depend *~ core bench.txt *.gcda ./syzygy/*.o ./syzygy/*.gcda +#clean all +clean: objclean profileclean + @rm -f .depend *~ core + +# clean binaries and objects +objclean: + @rm -f $(EXE) *.o ./syzygy/*.o + +# clean auxiliary profiling files +profileclean: + @rm -rf profdir + @rm -f bench.txt *.gcda ./syzygy/*.gcda *.gcno ./syzygy/*.gcno + @rm -f stockfish.profdata *.profraw default: help @@ -466,12 +458,13 @@ default: ### Section 5. Private targets ### ========================================================================== -all: $(EXE) .depend +all: $(EXE) client .depend config-sanity: @echo "" @echo "Config:" @echo "debug: '$(debug)'" + @echo "sanitize: '$(sanitize)'" @echo "optimize: '$(optimize)'" @echo "arch: '$(arch)'" @echo "bits: '$(bits)'" @@ -490,6 +483,7 @@ config-sanity: @echo "Testing config sanity. If this fails, try 'make help' ..." @echo "" @test "$(debug)" = "yes" || test "$(debug)" = "no" + @test "$(sanitize)" = "undefined" || test "$(sanitize)" = "thread" || test "$(sanitize)" = "no" @test "$(optimize)" = "yes" || test "$(optimize)" = "no" @test "$(arch)" = "any" || test "$(arch)" = "x86_64" || test "$(arch)" = "i386" || \ test "$(arch)" = "ppc64" || test "$(arch)" = "ppc" || test "$(arch)" = "armv7" @@ -503,8 +497,18 @@ config-sanity: $(EXE): $(OBJS) $(CXX) -o $@ $(OBJS) $(LDFLAGS) -gcc-profile-prepare: - $(MAKE) ARCH=$(ARCH) COMP=$(COMP) gcc-profile-clean +clang-profile-make: + $(MAKE) ARCH=$(ARCH) COMP=$(COMP) \ + EXTRACXXFLAGS='-fprofile-instr-generate ' \ + EXTRALDFLAGS=' -fprofile-instr-generate' \ + all + +clang-profile-use: + llvm-profdata merge -output=stockfish.profdata *.profraw + $(MAKE) ARCH=$(ARCH) COMP=$(COMP) \ + EXTRACXXFLAGS='-fprofile-instr-use=stockfish.profdata' \ + EXTRALDFLAGS='-fprofile-use ' \ + all gcc-profile-make: $(MAKE) ARCH=$(ARCH) COMP=$(COMP) \ @@ -518,14 +522,8 @@ gcc-profile-use: EXTRALDFLAGS='-lgcov' \ all -gcc-profile-clean: - @rm -rf *.gcda *.gcno syzygy/*.gcda syzygy/*.gcno bench.txt - -icc-profile-prepare: - $(MAKE) ARCH=$(ARCH) COMP=$(COMP) icc-profile-clean - @mkdir profdir - icc-profile-make: + @mkdir -p profdir $(MAKE) ARCH=$(ARCH) COMP=$(COMP) \ EXTRACXXFLAGS='-prof-gen=srcpos -prof_dir ./profdir' \ all @@ -535,8 +533,29 @@ icc-profile-use: EXTRACXXFLAGS='-prof_use -prof_dir ./profdir' \ all -icc-profile-clean: - @rm -rf profdir bench.txt +### GRPC + +PROTOS_PATH = . +PROTOC = protoc +GRPC_CPP_PLUGIN = grpc_cpp_plugin +GRPC_CPP_PLUGIN_PATH ?= `which $(GRPC_CPP_PLUGIN)` + +%.grpc.pb.h %.grpc.pb.cc: %.proto + $(PROTOC) -I $(PROTOS_PATH) --grpc_out=. --plugin=protoc-gen-grpc=$(GRPC_CPP_PLUGIN_PATH) $< + +# oh my +%.cpp: %.cc + cp $< $@ + +%.pb.h %.pb.cc: %.proto + $(PROTOC) -I $(PROTOS_PATH) --cpp_out=. $< + +LDFLAGS += -lprotobuf -lgrpc++_unsecure -lgrpc_unsecure -lgrpc + +client: $(CLIOBJS) + $(CXX) -o $@ $(CLIOBJS) $(LDFLAGS) + +# Other stuff .depend: -@$(CXX) $(DEPENDFLAGS) -MM $(OBJS:.o=.cpp) > $@ 2> /dev/null