2 * This file is part of FFmpeg.
4 * FFmpeg is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU Lesser General Public
6 * License as published by the Free Software Foundation; either
7 * version 2.1 of the License, or (at your option) any later version.
9 * FFmpeg is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 * Lesser General Public License for more details.
14 * You should have received a copy of the GNU Lesser General Public
15 * License along with FFmpeg; if not, write to the Free Software
16 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
22 * reference-counted frame API
25 #ifndef AVUTIL_FRAME_H
26 #define AVUTIL_FRAME_H
35 #include "samplefmt.h"
41 * @defgroup lavu_frame AVFrame
45 * AVFrame is an abstraction for reference-counted raw multimedia data.
48 enum AVFrameSideDataType {
50 * The data is the AVPanScan struct defined in libavcodec.
52 AV_FRAME_DATA_PANSCAN,
54 * ATSC A53 Part 4 Closed Captions.
55 * A53 CC bitstream is stored as uint8_t in AVFrameSideData.data.
56 * The number of bytes of CC data is AVFrameSideData.size.
60 * Stereoscopic 3d metadata.
61 * The data is the AVStereo3D struct defined in libavutil/stereo3d.h.
63 AV_FRAME_DATA_STEREO3D,
65 * The data is the AVMatrixEncoding enum defined in libavutil/channel_layout.h.
67 AV_FRAME_DATA_MATRIXENCODING,
69 * Metadata relevant to a downmix procedure.
70 * The data is the AVDownmixInfo struct defined in libavutil/downmix_info.h.
72 AV_FRAME_DATA_DOWNMIX_INFO,
74 * ReplayGain information in the form of the AVReplayGain struct.
76 AV_FRAME_DATA_REPLAYGAIN,
78 * This side data contains a 3x3 transformation matrix describing an affine
79 * transformation that needs to be applied to the frame for correct
82 * See libavutil/display.h for a detailed description of the data.
84 AV_FRAME_DATA_DISPLAYMATRIX,
86 * Active Format Description data consisting of a single byte as specified
87 * in ETSI TS 101 154 using AVActiveFormatDescription enum.
91 * Motion vectors exported by some codecs (on demand through the export_mvs
92 * flag set in the libavcodec AVCodecContext flags2 option).
93 * The data is the AVMotionVector struct defined in
94 * libavutil/motion_vector.h.
96 AV_FRAME_DATA_MOTION_VECTORS,
98 * Recommmends skipping the specified number of samples. This is exported
99 * only if the "skip_manual" AVOption is set in libavcodec.
100 * This has the same format as AV_PKT_DATA_SKIP_SAMPLES.
102 * u32le number of samples to skip from start of this packet
103 * u32le number of samples to skip from end of this packet
104 * u8 reason for start skip
105 * u8 reason for end skip (0=padding silence, 1=convergence)
108 AV_FRAME_DATA_SKIP_SAMPLES,
110 * This side data must be associated with an audio frame and corresponds to
111 * enum AVAudioServiceType defined in avcodec.h.
113 AV_FRAME_DATA_AUDIO_SERVICE_TYPE,
115 * Mastering display metadata associated with a video frame. The payload is
116 * an AVMasteringDisplayMetadata type and contains information about the
117 * mastering display color volume.
119 AV_FRAME_DATA_MASTERING_DISPLAY_METADATA,
121 * The GOP timecode in 25 bit timecode format. Data format is 64-bit integer.
122 * This is set on the first frame of a GOP that has a temporal reference of 0.
124 AV_FRAME_DATA_GOP_TIMECODE,
127 * The data represents the AVSphericalMapping structure defined in
128 * libavutil/spherical.h.
130 AV_FRAME_DATA_SPHERICAL,
133 * Content light level (based on CTA-861.3). This payload contains data in
134 * the form of the AVContentLightMetadata struct.
136 AV_FRAME_DATA_CONTENT_LIGHT_LEVEL,
139 * The data contains an ICC profile as an opaque octet buffer following the
140 * format described by ISO 15076-1 with an optional name defined in the
141 * metadata key entry "name".
143 AV_FRAME_DATA_ICC_PROFILE,
147 * Implementation-specific description of the format of AV_FRAME_QP_TABLE_DATA.
148 * The contents of this side data are undocumented and internal; use
149 * av_frame_set_qp_table() and av_frame_get_qp_table() to access this in a
150 * meaningful way instead.
152 AV_FRAME_DATA_QP_TABLE_PROPERTIES,
155 * Raw QP table data. Its format is described by
156 * AV_FRAME_DATA_QP_TABLE_PROPERTIES. Use av_frame_set_qp_table() and
157 * av_frame_get_qp_table() to access this instead.
159 AV_FRAME_DATA_QP_TABLE_DATA,
163 * Timecode which conforms to SMPTE ST 12-1. The data is an array of 4 uint32_t
164 * where the first uint32_t describes how many (1-3) of the other timecodes are used.
165 * The timecode format is described in the documentation of av_timecode_get_smpte_from_framenum()
166 * function in libavutil/timecode.h.
168 AV_FRAME_DATA_S12M_TIMECODE,
171 * HDR dynamic metadata associated with a video frame. The payload is
172 * an AVDynamicHDRPlus type and contains information for color
173 * volume transform - application 4 of SMPTE 2094-40:2016 standard.
175 AV_FRAME_DATA_DYNAMIC_HDR_PLUS,
178 * Regions Of Interest, the data is an array of AVRegionOfInterest type, the number of
179 * array element is implied by AVFrameSideData.size / AVRegionOfInterest.self_size.
181 AV_FRAME_DATA_REGIONS_OF_INTEREST,
184 * Encoding parameters for a video frame, as described by AVVideoEncParams.
186 AV_FRAME_DATA_VIDEO_ENC_PARAMS,
189 * User data unregistered metadata associated with a video frame.
190 * This is the H.26[45] UDU SEI message, and shouldn't be used for any other purpose
191 * The data is stored as uint8_t in AVFrameSideData.data which is 16 bytes of
192 * uuid_iso_iec_11578 followed by AVFrameSideData.size - 16 bytes of user_data_payload_byte.
194 AV_FRAME_DATA_SEI_UNREGISTERED,
197 * Film grain parameters for a frame, described by AVFilmGrainParameters.
198 * Must be present for every frame which should have film grain applied.
200 AV_FRAME_DATA_FILM_GRAIN_PARAMS,
203 enum AVActiveFormatDescription {
208 AV_AFD_4_3_SP_14_9 = 13,
209 AV_AFD_16_9_SP_14_9 = 14,
215 * Structure to hold side data for an AVFrame.
217 * sizeof(AVFrameSideData) is not a part of the public ABI, so new fields may be added
218 * to the end with a minor bump.
220 typedef struct AVFrameSideData {
221 enum AVFrameSideDataType type;
224 AVDictionary *metadata;
229 * Structure describing a single Region Of Interest.
231 * When multiple regions are defined in a single side-data block, they
232 * should be ordered from most to least important - some encoders are only
233 * capable of supporting a limited number of distinct regions, so will have
234 * to truncate the list.
236 * When overlapping regions are defined, the first region containing a given
237 * area of the frame applies.
239 typedef struct AVRegionOfInterest {
241 * Must be set to the size of this data structure (that is,
242 * sizeof(AVRegionOfInterest)).
246 * Distance in pixels from the top edge of the frame to the top and
247 * bottom edges and from the left edge of the frame to the left and
248 * right edges of the rectangle defining this region of interest.
250 * The constraints on a region are encoder dependent, so the region
251 * actually affected may be slightly larger for alignment or other
259 * Quantisation offset.
261 * Must be in the range -1 to +1. A value of zero indicates no quality
262 * change. A negative value asks for better quality (less quantisation),
263 * while a positive value asks for worse quality (greater quantisation).
265 * The range is calibrated so that the extreme values indicate the
266 * largest possible offset - if the rest of the frame is encoded with the
267 * worst possible quality, an offset of -1 indicates that this region
268 * should be encoded with the best possible quality anyway. Intermediate
269 * values are then interpolated in some codec-dependent way.
271 * For example, in 10-bit H.264 the quantisation parameter varies between
272 * -12 and 51. A typical qoffset value of -1/10 therefore indicates that
273 * this region should be encoded with a QP around one-tenth of the full
274 * range better than the rest of the frame. So, if most of the frame
275 * were to be encoded with a QP of around 30, this region would get a QP
276 * of around 24 (an offset of approximately -1/10 * (51 - -12) = -6.3).
277 * An extreme value of -1 would indicate that this region should be
278 * encoded with the best possible quality regardless of the treatment of
279 * the rest of the frame - that is, should be encoded at a QP of -12.
282 } AVRegionOfInterest;
285 * This structure describes decoded (raw) audio or video data.
287 * AVFrame must be allocated using av_frame_alloc(). Note that this only
288 * allocates the AVFrame itself, the buffers for the data must be managed
289 * through other means (see below).
290 * AVFrame must be freed with av_frame_free().
292 * AVFrame is typically allocated once and then reused multiple times to hold
293 * different data (e.g. a single AVFrame to hold frames received from a
294 * decoder). In such a case, av_frame_unref() will free any references held by
295 * the frame and reset it to its original clean state before it
298 * The data described by an AVFrame is usually reference counted through the
299 * AVBuffer API. The underlying buffer references are stored in AVFrame.buf /
300 * AVFrame.extended_buf. An AVFrame is considered to be reference counted if at
301 * least one reference is set, i.e. if AVFrame.buf[0] != NULL. In such a case,
302 * every single data plane must be contained in one of the buffers in
303 * AVFrame.buf or AVFrame.extended_buf.
304 * There may be a single buffer for all the data, or one separate buffer for
305 * each plane, or anything in between.
307 * sizeof(AVFrame) is not a part of the public ABI, so new fields may be added
308 * to the end with a minor bump.
310 * Fields can be accessed through AVOptions, the name string used, matches the
311 * C structure field name for fields accessible through AVOptions. The AVClass
312 * for AVFrame can be obtained from avcodec_get_frame_class()
314 typedef struct AVFrame {
315 #define AV_NUM_DATA_POINTERS 8
317 * pointer to the picture/channel planes.
318 * This might be different from the first allocated byte
320 * Some decoders access areas outside 0,0 - width,height, please
321 * see avcodec_align_dimensions2(). Some filters and swscale can read
322 * up to 16 bytes beyond the planes, if these filters are to be used,
323 * then 16 extra bytes must be allocated.
325 * NOTE: Except for hwaccel formats, pointers not needed by the format
326 * MUST be set to NULL.
328 uint8_t *data[AV_NUM_DATA_POINTERS];
331 * For video, size in bytes of each picture line.
332 * For audio, size in bytes of each plane.
334 * For audio, only linesize[0] may be set. For planar audio, each channel
335 * plane must be the same size.
337 * For video the linesizes should be multiples of the CPUs alignment
338 * preference, this is 16 or 32 for modern desktop CPUs.
339 * Some code requires such alignment other code can be slower without
340 * correct alignment, for yet other it makes no difference.
342 * @note The linesize may be larger than the size of usable data -- there
343 * may be extra padding present for performance reasons.
345 int linesize[AV_NUM_DATA_POINTERS];
348 * pointers to the data planes/channels.
350 * For video, this should simply point to data[].
352 * For planar audio, each channel has a separate data pointer, and
353 * linesize[0] contains the size of each channel buffer.
354 * For packed audio, there is just one data pointer, and linesize[0]
355 * contains the total size of the buffer for all channels.
357 * Note: Both data and extended_data should always be set in a valid frame,
358 * but for planar audio with more channels that can fit in data,
359 * extended_data must be used in order to access all channels.
361 uint8_t **extended_data;
364 * @name Video dimensions
365 * Video frames only. The coded dimensions (in pixels) of the video frame,
366 * i.e. the size of the rectangle that contains some well-defined values.
368 * @note The part of the frame intended for display/presentation is further
369 * restricted by the @ref cropping "Cropping rectangle".
378 * number of audio samples (per channel) described by this frame
383 * format of the frame, -1 if unknown or unset
384 * Values correspond to enum AVPixelFormat for video frames,
385 * enum AVSampleFormat for audio)
390 * 1 -> keyframe, 0-> not
395 * Picture type of the frame.
397 enum AVPictureType pict_type;
400 * Sample aspect ratio for the video frame, 0/1 if unknown/unspecified.
402 AVRational sample_aspect_ratio;
405 * Presentation timestamp in time_base units (time when frame should be shown to user).
411 * PTS copied from the AVPacket that was decoded to produce this frame.
412 * @deprecated use the pts field instead
419 * DTS copied from the AVPacket that triggered returning this frame. (if frame threading isn't used)
420 * This is also the Presentation time of this AVFrame calculated from
421 * only AVPacket.dts values without pts values.
426 * picture number in bitstream order
428 int coded_picture_number;
430 * picture number in display order
432 int display_picture_number;
435 * quality (between 1 (good) and FF_LAMBDA_MAX (bad))
440 * for some private data of the user
444 #if FF_API_ERROR_FRAME
449 uint64_t error[AV_NUM_DATA_POINTERS];
453 * When decoding, this signals how much the picture must be delayed.
454 * extra_delay = repeat_pict / (2*fps)
459 * The content of the picture is interlaced.
461 int interlaced_frame;
464 * If the content is interlaced, is top field displayed first.
469 * Tell user application that palette has changed from previous frame.
471 int palette_has_changed;
474 * reordered opaque 64 bits (generally an integer or a double precision float
475 * PTS but can be anything).
476 * The user sets AVCodecContext.reordered_opaque to represent the input at
478 * the decoder reorders values as needed and sets AVFrame.reordered_opaque
479 * to exactly one of the values provided by the user through AVCodecContext.reordered_opaque
481 int64_t reordered_opaque;
484 * Sample rate of the audio data.
489 * Channel layout of the audio data.
491 uint64_t channel_layout;
494 * AVBuffer references backing the data for this frame. If all elements of
495 * this array are NULL, then this frame is not reference counted. This array
496 * must be filled contiguously -- if buf[i] is non-NULL then buf[j] must
497 * also be non-NULL for all j < i.
499 * There may be at most one AVBuffer per data plane, so for video this array
500 * always contains all the references. For planar audio with more than
501 * AV_NUM_DATA_POINTERS channels, there may be more buffers than can fit in
502 * this array. Then the extra AVBufferRef pointers are stored in the
503 * extended_buf array.
505 AVBufferRef *buf[AV_NUM_DATA_POINTERS];
508 * For planar audio which requires more than AV_NUM_DATA_POINTERS
509 * AVBufferRef pointers, this array will hold all the references which
510 * cannot fit into AVFrame.buf.
512 * Note that this is different from AVFrame.extended_data, which always
513 * contains all the pointers. This array only contains the extra pointers,
514 * which cannot fit into AVFrame.buf.
516 * This array is always allocated using av_malloc() by whoever constructs
517 * the frame. It is freed in av_frame_unref().
519 AVBufferRef **extended_buf;
521 * Number of elements in extended_buf.
525 AVFrameSideData **side_data;
529 * @defgroup lavu_frame_flags AV_FRAME_FLAGS
530 * @ingroup lavu_frame
531 * Flags describing additional frame properties.
537 * The frame data may be corrupted, e.g. due to decoding errors.
539 #define AV_FRAME_FLAG_CORRUPT (1 << 0)
541 * A flag to mark the frames which need to be decoded, but shouldn't be output.
543 #define AV_FRAME_FLAG_DISCARD (1 << 2)
549 * Frame flags, a combination of @ref lavu_frame_flags
554 * MPEG vs JPEG YUV range.
555 * - encoding: Set by user
556 * - decoding: Set by libavcodec
558 enum AVColorRange color_range;
560 enum AVColorPrimaries color_primaries;
562 enum AVColorTransferCharacteristic color_trc;
565 * YUV colorspace type.
566 * - encoding: Set by user
567 * - decoding: Set by libavcodec
569 enum AVColorSpace colorspace;
571 enum AVChromaLocation chroma_location;
574 * frame timestamp estimated using various heuristics, in stream time base
576 * - decoding: set by libavcodec, read by user.
578 int64_t best_effort_timestamp;
581 * reordered pos from the last AVPacket that has been input into the decoder
583 * - decoding: Read by user.
588 * duration of the corresponding packet, expressed in
589 * AVStream->time_base units, 0 if unknown.
591 * - decoding: Read by user.
593 int64_t pkt_duration;
597 * - encoding: Set by user.
598 * - decoding: Set by libavcodec.
600 AVDictionary *metadata;
603 * decode error flags of the frame, set to a combination of
604 * FF_DECODE_ERROR_xxx flags if the decoder produced a frame, but there
605 * were errors during the decoding.
607 * - decoding: set by libavcodec, read by user.
609 int decode_error_flags;
610 #define FF_DECODE_ERROR_INVALID_BITSTREAM 1
611 #define FF_DECODE_ERROR_MISSING_REFERENCE 2
612 #define FF_DECODE_ERROR_CONCEALMENT_ACTIVE 4
613 #define FF_DECODE_ERROR_DECODE_SLICES 8
616 * number of audio channels, only used for audio.
618 * - decoding: Read by user.
623 * size of the corresponding packet containing the compressed
625 * It is set to a negative value if unknown.
627 * - decoding: set by libavcodec, read by user.
636 int8_t *qscale_table;
647 AVBufferRef *qp_table_buf;
650 * For hwaccel-format frames, this should be a reference to the
651 * AVHWFramesContext describing the frame.
653 AVBufferRef *hw_frames_ctx;
656 * AVBufferRef for free use by the API user. FFmpeg will never check the
657 * contents of the buffer ref. FFmpeg calls av_buffer_unref() on it when
658 * the frame is unreferenced. av_frame_copy_props() calls create a new
659 * reference with av_buffer_ref() for the target frame's opaque_ref field.
661 * This is unrelated to the opaque field, although it serves a similar
664 AVBufferRef *opaque_ref;
669 * Video frames only. The number of pixels to discard from the the
670 * top/bottom/left/right border of the frame to obtain the sub-rectangle of
671 * the frame intended for presentation.
683 * AVBufferRef for internal use by a single libav* library.
684 * Must not be used to transfer data between libraries.
685 * Has to be NULL when ownership of the frame leaves the respective library.
687 * Code outside the FFmpeg libs should never check or change the contents of the buffer ref.
689 * FFmpeg calls av_buffer_unref() on it when the frame is unreferenced.
690 * av_frame_copy_props() calls create a new reference with av_buffer_ref()
691 * for the target frame's private_ref field.
693 AVBufferRef *private_ref;
696 #if FF_API_FRAME_GET_SET
698 * Accessors for some AVFrame fields. These used to be provided for ABI
699 * compatibility, and do not need to be used anymore.
702 int64_t av_frame_get_best_effort_timestamp(const AVFrame *frame);
704 void av_frame_set_best_effort_timestamp(AVFrame *frame, int64_t val);
706 int64_t av_frame_get_pkt_duration (const AVFrame *frame);
708 void av_frame_set_pkt_duration (AVFrame *frame, int64_t val);
710 int64_t av_frame_get_pkt_pos (const AVFrame *frame);
712 void av_frame_set_pkt_pos (AVFrame *frame, int64_t val);
714 int64_t av_frame_get_channel_layout (const AVFrame *frame);
716 void av_frame_set_channel_layout (AVFrame *frame, int64_t val);
718 int av_frame_get_channels (const AVFrame *frame);
720 void av_frame_set_channels (AVFrame *frame, int val);
722 int av_frame_get_sample_rate (const AVFrame *frame);
724 void av_frame_set_sample_rate (AVFrame *frame, int val);
726 AVDictionary *av_frame_get_metadata (const AVFrame *frame);
728 void av_frame_set_metadata (AVFrame *frame, AVDictionary *val);
730 int av_frame_get_decode_error_flags (const AVFrame *frame);
732 void av_frame_set_decode_error_flags (AVFrame *frame, int val);
734 int av_frame_get_pkt_size(const AVFrame *frame);
736 void av_frame_set_pkt_size(AVFrame *frame, int val);
739 int8_t *av_frame_get_qp_table(AVFrame *f, int *stride, int *type);
741 int av_frame_set_qp_table(AVFrame *f, AVBufferRef *buf, int stride, int type);
744 enum AVColorSpace av_frame_get_colorspace(const AVFrame *frame);
746 void av_frame_set_colorspace(AVFrame *frame, enum AVColorSpace val);
748 enum AVColorRange av_frame_get_color_range(const AVFrame *frame);
750 void av_frame_set_color_range(AVFrame *frame, enum AVColorRange val);
754 * Get the name of a colorspace.
755 * @return a static string identifying the colorspace; can be NULL.
757 const char *av_get_colorspace_name(enum AVColorSpace val);
760 * Allocate an AVFrame and set its fields to default values. The resulting
761 * struct must be freed using av_frame_free().
763 * @return An AVFrame filled with default values or NULL on failure.
765 * @note this only allocates the AVFrame itself, not the data buffers. Those
766 * must be allocated through other means, e.g. with av_frame_get_buffer() or
769 AVFrame *av_frame_alloc(void);
772 * Free the frame and any dynamically allocated objects in it,
773 * e.g. extended_data. If the frame is reference counted, it will be
774 * unreferenced first.
776 * @param frame frame to be freed. The pointer will be set to NULL.
778 void av_frame_free(AVFrame **frame);
781 * Set up a new reference to the data described by the source frame.
783 * Copy frame properties from src to dst and create a new reference for each
784 * AVBufferRef from src.
786 * If src is not reference counted, new buffers are allocated and the data is
789 * @warning: dst MUST have been either unreferenced with av_frame_unref(dst),
790 * or newly allocated with av_frame_alloc() before calling this
791 * function, or undefined behavior will occur.
793 * @return 0 on success, a negative AVERROR on error
795 int av_frame_ref(AVFrame *dst, const AVFrame *src);
798 * Create a new frame that references the same data as src.
800 * This is a shortcut for av_frame_alloc()+av_frame_ref().
802 * @return newly created AVFrame on success, NULL on error.
804 AVFrame *av_frame_clone(const AVFrame *src);
807 * Unreference all the buffers referenced by frame and reset the frame fields.
809 void av_frame_unref(AVFrame *frame);
812 * Move everything contained in src to dst and reset src.
814 * @warning: dst is not unreferenced, but directly overwritten without reading
815 * or deallocating its contents. Call av_frame_unref(dst) manually
816 * before calling this function to ensure that no memory is leaked.
818 void av_frame_move_ref(AVFrame *dst, AVFrame *src);
821 * Allocate new buffer(s) for audio or video data.
823 * The following fields must be set on frame before calling this function:
824 * - format (pixel format for video, sample format for audio)
825 * - width and height for video
826 * - nb_samples and channel_layout for audio
828 * This function will fill AVFrame.data and AVFrame.buf arrays and, if
829 * necessary, allocate and fill AVFrame.extended_data and AVFrame.extended_buf.
830 * For planar formats, one buffer will be allocated for each plane.
832 * @warning: if frame already has been allocated, calling this function will
833 * leak memory. In addition, undefined behavior can occur in certain
836 * @param frame frame in which to store the new buffers.
837 * @param align Required buffer size alignment. If equal to 0, alignment will be
838 * chosen automatically for the current CPU. It is highly
839 * recommended to pass 0 here unless you know what you are doing.
841 * @return 0 on success, a negative AVERROR on error.
843 int av_frame_get_buffer(AVFrame *frame, int align);
846 * Check if the frame data is writable.
848 * @return A positive value if the frame data is writable (which is true if and
849 * only if each of the underlying buffers has only one reference, namely the one
850 * stored in this frame). Return 0 otherwise.
852 * If 1 is returned the answer is valid until av_buffer_ref() is called on any
853 * of the underlying AVBufferRefs (e.g. through av_frame_ref() or directly).
855 * @see av_frame_make_writable(), av_buffer_is_writable()
857 int av_frame_is_writable(AVFrame *frame);
860 * Ensure that the frame data is writable, avoiding data copy if possible.
862 * Do nothing if the frame is writable, allocate new buffers and copy the data
865 * @return 0 on success, a negative AVERROR on error.
867 * @see av_frame_is_writable(), av_buffer_is_writable(),
868 * av_buffer_make_writable()
870 int av_frame_make_writable(AVFrame *frame);
873 * Copy the frame data from src to dst.
875 * This function does not allocate anything, dst must be already initialized and
876 * allocated with the same parameters as src.
878 * This function only copies the frame data (i.e. the contents of the data /
879 * extended data arrays), not any other properties.
881 * @return >= 0 on success, a negative AVERROR on error.
883 int av_frame_copy(AVFrame *dst, const AVFrame *src);
886 * Copy only "metadata" fields from src to dst.
888 * Metadata for the purpose of this function are those fields that do not affect
889 * the data layout in the buffers. E.g. pts, sample rate (for audio) or sample
890 * aspect ratio (for video), but not width/height or channel layout.
891 * Side data is also copied.
893 int av_frame_copy_props(AVFrame *dst, const AVFrame *src);
896 * Get the buffer reference a given data plane is stored in.
898 * @param plane index of the data plane of interest in frame->extended_data.
900 * @return the buffer reference that contains the plane or NULL if the input
901 * frame is not valid.
903 AVBufferRef *av_frame_get_plane_buffer(AVFrame *frame, int plane);
906 * Add a new side data to a frame.
908 * @param frame a frame to which the side data should be added
909 * @param type type of the added side data
910 * @param size size of the side data
912 * @return newly added side data on success, NULL on error
914 AVFrameSideData *av_frame_new_side_data(AVFrame *frame,
915 enum AVFrameSideDataType type,
919 * Add a new side data to a frame from an existing AVBufferRef
921 * @param frame a frame to which the side data should be added
922 * @param type the type of the added side data
923 * @param buf an AVBufferRef to add as side data. The ownership of
924 * the reference is transferred to the frame.
926 * @return newly added side data on success, NULL on error. On failure
927 * the frame is unchanged and the AVBufferRef remains owned by
930 AVFrameSideData *av_frame_new_side_data_from_buf(AVFrame *frame,
931 enum AVFrameSideDataType type,
935 * @return a pointer to the side data of a given type on success, NULL if there
936 * is no side data with such type in this frame.
938 AVFrameSideData *av_frame_get_side_data(const AVFrame *frame,
939 enum AVFrameSideDataType type);
942 * Remove and free all side data instances of the given type.
944 void av_frame_remove_side_data(AVFrame *frame, enum AVFrameSideDataType type);
948 * Flags for frame cropping.
952 * Apply the maximum possible cropping, even if it requires setting the
953 * AVFrame.data[] entries to unaligned pointers. Passing unaligned data
954 * to FFmpeg API is generally not allowed, and causes undefined behavior
955 * (such as crashes). You can pass unaligned data only to FFmpeg APIs that
956 * are explicitly documented to accept it. Use this flag only if you
957 * absolutely know what you are doing.
959 AV_FRAME_CROP_UNALIGNED = 1 << 0,
963 * Crop the given video AVFrame according to its crop_left/crop_top/crop_right/
964 * crop_bottom fields. If cropping is successful, the function will adjust the
965 * data pointers and the width/height fields, and set the crop fields to 0.
967 * In all cases, the cropping boundaries will be rounded to the inherent
968 * alignment of the pixel format. In some cases, such as for opaque hwaccel
969 * formats, the left/top cropping is ignored. The crop fields are set to 0 even
970 * if the cropping was rounded or ignored.
972 * @param frame the frame which should be cropped
973 * @param flags Some combination of AV_FRAME_CROP_* flags, or 0.
975 * @return >= 0 on success, a negative AVERROR on error. If the cropping fields
976 * were invalid, AVERROR(ERANGE) is returned, and nothing is changed.
978 int av_frame_apply_cropping(AVFrame *frame, int flags);
981 * @return a string identifying the side data type
983 const char *av_frame_side_data_name(enum AVFrameSideDataType type);
989 #endif /* AVUTIL_FRAME_H */