1 // Mappings from MIDI controllers to the UI. (We don't really build
2 // a more complicated data structure than this in Nageru itself either;
3 // we just edit and match directly against the protobuf.)
7 import "midi_mapping.proto";
9 // All the mappings for a given a bus.
10 message MIDIMappingBusProto {
11 // TODO: If we need support for lots of buses (i.e., more than the typical eight
12 // on a mixer), add a system for bus banks, like we have for controller banks.
13 // optional int32 bus_bank = 1;
15 optional MIDIControllerProto stereo_width = 37;
16 optional MIDIControllerProto treble = 2;
17 optional MIDIControllerProto mid = 3;
18 optional MIDIControllerProto bass = 4;
19 optional MIDIControllerProto gain = 5;
20 optional MIDIControllerProto compressor_threshold = 6;
21 optional MIDIControllerProto fader = 7;
23 optional MIDIButtonProto toggle_mute = 8;
24 optional MIDIButtonProto toggle_locut = 9;
25 optional MIDIButtonProto toggle_auto_gain_staging = 10;
26 optional MIDIButtonProto toggle_compressor = 11;
27 optional MIDIButtonProto clear_peak = 12;
29 // These are really global (controller bank change affects all buses),
30 // but it's not uncommon that we'd want one button per bus to switch banks.
31 // E.g., if the user binds the “mute” button to “next bank”, they'd want every
32 // mute button on the mixer to do that, so they need one mapping per bus.
33 optional MIDIButtonProto prev_bank = 13;
34 optional MIDIButtonProto next_bank = 14;
35 optional MIDIButtonProto select_bank_1 = 15;
36 optional MIDIButtonProto select_bank_2 = 16;
37 optional MIDIButtonProto select_bank_3 = 17;
38 optional MIDIButtonProto select_bank_4 = 18;
39 optional MIDIButtonProto select_bank_5 = 19;
40 optional MIDIButtonProto toggle_limiter = 20;
41 optional MIDIButtonProto toggle_auto_makeup_gain = 21;
43 // These are also global (they belong to the master bus), and unlike
44 // the bank change commands, one would usually have only one of each,
45 // but there's no reason to limit them to one each, and the editor UI
46 // becomes simpler if they are the treated the same way as the bank
48 optional MIDIControllerProto locut = 22;
49 optional MIDIControllerProto limiter_threshold = 23;
50 optional MIDIControllerProto makeup_gain = 24;
53 optional MIDILightProto is_muted = 25;
54 optional MIDILightProto locut_is_on = 26;
55 optional MIDILightProto auto_gain_staging_is_on = 27;
56 optional MIDILightProto compressor_is_on = 28;
57 optional MIDILightProto has_peaked = 29;
59 // Global lights. Same logic as above for why they're in this proto.
60 optional MIDILightProto bank_1_is_selected = 30;
61 optional MIDILightProto bank_2_is_selected = 31;
62 optional MIDILightProto bank_3_is_selected = 32;
63 optional MIDILightProto bank_4_is_selected = 33;
64 optional MIDILightProto bank_5_is_selected = 34;
65 optional MIDILightProto limiter_is_on = 35;
66 optional MIDILightProto auto_makeup_gain_is_on = 36;
69 // The top-level protobuf, containing all the bus mappings, as well as
70 // more global settings.
72 // Since a typical mixer will have fewer physical controls than what Nageru
73 // could use, Nageru supports so-called controller banks. A mapping can
74 // optionally belong to a bank, and if so, that mapping is only active when
75 // that bank is selected. The user can then select the current bank using
76 // other mappings, typically by having some mixer button assigned to
77 // “next bank”. This yields effective multiplexing of lesser-used controls.
78 message MIDIMappingProto {
79 optional int32 num_controller_banks = 1 [default = 0]; // Max 5.
81 // Bus controller banks.
82 optional int32 stereo_width_bank = 19;
83 optional int32 treble_bank = 2;
84 optional int32 mid_bank = 3;
85 optional int32 bass_bank = 4;
86 optional int32 gain_bank = 5;
87 optional int32 compressor_threshold_bank = 6;
88 optional int32 fader_bank = 7;
91 optional int32 toggle_mute_bank = 8;
92 optional int32 toggle_locut_bank = 9;
93 optional int32 toggle_auto_gain_staging_bank = 10;
94 optional int32 toggle_compressor_bank = 11;
95 optional int32 clear_peak_bank = 12;
97 // Global controller banks.
98 optional int32 locut_bank = 13;
99 optional int32 limiter_threshold_bank = 14;
100 optional int32 makeup_gain_bank = 15;
103 optional int32 toggle_limiter_bank = 16;
104 optional int32 toggle_auto_makeup_gain_bank = 17;
106 repeated MIDIMappingBusProto bus_mapping = 18;