Syntax
******

This section documents the syntax and formats employed by the FFmpeg libraries and tools.

Quoting and escaping
====================

FFmpeg adopts the following quoting and escaping mechanism, unless explicitly specified. The following rules are applied:

  * ' and \ are special characters (respectively used for quoting and escaping). In addition to them, there might be other special characters depending on the specific syntax where the escaping and quoting are employed.

  * A special character is escaped by prefixing it with a '\'.

  * All characters enclosed between '' are included literally in the parsed string. The quote character ' itself cannot be quoted, so you may need to close the quote and escape it.

  * Leading and trailing whitespaces, unless escaped or quoted, are removed from the parsed string.

Note that you may need to add a second level of escaping when using the command line or a script, which depends on the syntax of the adopted shell language.

The function av_get_token defined in libavutil/avstring.h can be used to parse a token quoted or escaped according to the rules defined above.

The tool tools/ffescape in the FFmpeg source tree can be used to automatically quote or escape a string in a script.

Examples
--------

  * Escape the string Crime d'Amour containing the ' special character:

          Crime d\'Amour

  * The string above contains a quote, so the ' needs to be escaped when quoting it:

          'Crime d'\''Amour'

  * Include leading or trailing whitespaces using quoting:

          '  this string starts and ends with whitespaces  '

  * Escaping and quoting can be mixed together:

          ' The string '\'string\'' is a string '

  * To include a literal \ you can use either escaping or quoting:

          'c:\foo' can be written as c:\\foo

Date
====

The accepted syntax is:

     [(YYYY-MM-DD|YYYYMMDD)[T|t| ]]((HH:MM:SS[.m...]]])|(HHMMSS[.m...]]]))[Z]
     now

If the value is "now" it takes the current time.

Time is local time unless Z is appended, in which case it is interpreted as UTC. If the year-month-day part is not specified it takes the current year-month-day.

Time duration
=============

The accepted syntax is:

     [-][HH:]MM:SS[.m...]
     [-]S+[.m...]

HH expresses the number of hours, MM the number a of minutes and SS the number of seconds.

Video size
==========

Specify the size of the sourced video, it may be a string of the form WIDTHxHEIGHT, or the name of a size abbreviation.

The following abbreviations are recognized:

ntsc
     720x480

pal
     720x576

qntsc
     352x240

qpal
     352x288

sntsc
     640x480

spal
     768x576

film
     352x240

ntsc-film
     352x240

sqcif
     128x96

qcif
     176x144

cif
     352x288

4cif
     704x576

16cif
     1408x1152

qqvga
     160x120

qvga
     320x240

vga
     640x480

svga
     800x600

xga
     1024x768

uxga
     1600x1200

qxga
     2048x1536

sxga
     1280x1024

qsxga
     2560x2048

hsxga
     5120x4096

wvga
     852x480

wxga
     1366x768

wsxga
     1600x1024

wuxga
     1920x1200

woxga
     2560x1600

wqsxga
     3200x2048

wquxga
     3840x2400

whsxga
     6400x4096

whuxga
     7680x4800

cga
     320x200

ega
     640x350

hd480
     852x480

hd720
     1280x720

hd1080
     1920x1080

2k
     2048x1080

2kflat
     1998x1080

2kscope
     2048x858

4k
     4096x2160

4kflat
     3996x2160

4kscope
     4096x1716

Video rate
==========

Specify the frame rate of a video, expressed as the number of frames generated per second. It has to be a string in the format FRAME_RATE_NUM/FRAME_RATE_DEN, an integer number, a float number or a valid video frame rate abbreviation.

The following abbreviations are recognized:

ntsc
     30000/1001

pal
     25/1

qntsc
     30000/1001

qpal
     25/1

sntsc
     30000/1001

spal
     25/1

film
     24/1

ntsc-film
     24000/1001

Ratio
=====

A ratio can be expressed as an expression, or in the form NUMERATOR:DENOMINATOR.

Note that a ratio with infinite (1/0) or negative value is considered valid, so you should check on the returned value if you want to exclude those values.

The undefined value can be expressed using the "0:0" string.

Color
=====

It can be the name of a color (case insensitive match) or a [0x|#]RRGGBB[AA] sequence, possibly followed by "@" and a string representing the alpha component.

The alpha component may be a string composed by "0x" followed by an hexadecimal number or a decimal number between 0.0 and 1.0, which represents the opacity value (0x00/0.0 means completely transparent, 0xff/1.0 completely opaque). If the alpha component is not specified then 0xff is assumed.

The string "random" will result in a random color.

Expression Evaluation
*********************

When evaluating an arithmetic expression, FFmpeg uses an internal formula evaluator, implemented through the libavutil/eval.h interface.

An expression may contain unary, binary operators, constants, and functions.

Two expressions EXPR1 and EXPR2 can be combined to form another expression "EXPR1;EXPR2". EXPR1 and EXPR2 are evaluated in turn, and the new expression evaluates to the value of EXPR2.

The following binary operators are available: +, -, *, /, ^.

The following unary operators are available: +, -.

The following functions are available:

abs(x)
     Compute absolute value of X.

acos(x)
     Compute arccosine of X.

asin(x)
     Compute arcsine of X.

atan(x)
     Compute arctangent of X.

between(x, min, max)
     Return 1 if X is greater than or equal to MIN and lesser than or equal to MAX, 0 otherwise.

bitand(x, y)

bitor(x, y)
     Compute bitwise and/or operation on X and Y.

     The results of the evaluation of X and Y are converted to integers before executing the bitwise operation.

     Note that both the conversion to integer and the conversion back to floating point can lose precision. Beware of unexpected results for large numbers (usually 2^53 and larger).

ceil(expr)
     Round the value of expression EXPR upwards to the nearest integer. For example, "ceil(1.5)" is "2.0".

cos(x)
     Compute cosine of X.

cosh(x)
     Compute hyperbolic cosine of X.

eq(x, y)
     Return 1 if X and Y are equivalent, 0 otherwise.

exp(x)
     Compute exponential of X (with base e, the Euler's number).

floor(expr)
     Round the value of expression EXPR downwards to the nearest integer. For example, "floor(-1.5)" is "-2.0".

gauss(x)
     Compute Gauss function of X, corresponding to exp(-x*x/2) / sqrt(2*PI).

gcd(x, y)
     Return the greatest common divisor of X and Y. If both X and Y are 0 or either or both are less than zero then behavior is undefined.

gt(x, y)
     Return 1 if X is greater than Y, 0 otherwise.

gte(x, y)
     Return 1 if X is greater than or equal to Y, 0 otherwise.

hypot(x, y)
     This function is similar to the C function with the same name; it returns "sqrt(X*X + Y*Y)", the length of the hypotenuse of a right triangle with sides of length X and Y, or the distance of the point (X, Y) from the origin.

if(x, y)
     Evaluate X, and if the result is non-zero return the result of the evaluation of Y, return 0 otherwise.

if(x, y, z)
     Evaluate X, and if the result is non-zero return the evaluation result of Y, otherwise the evaluation result of Z.

ifnot(x, y)
     Evaluate X, and if the result is zero return the result of the evaluation of Y, return 0 otherwise.

ifnot(x, y, z)
     Evaluate X, and if the result is zero return the evaluation result of Y, otherwise the evaluation result of Z.

isinf(x)
     Return 1.0 if X is +/-INFINITY, 0.0 otherwise.

isnan(x)
     Return 1.0 if X is NAN, 0.0 otherwise.

ld(var)
     Allow to load the value of the internal variable with number VAR, which was previously stored with st(VAR, EXPR). The function returns the loaded value.

log(x)
     Compute natural logarithm of X.

lt(x, y)
     Return 1 if X is lesser than Y, 0 otherwise.

lte(x, y)
     Return 1 if X is lesser than or equal to Y, 0 otherwise.

max(x, y)
     Return the maximum between X and Y.

min(x, y)
     Return the maximum between X and Y.

mod(x, y)
     Compute the remainder of division of X by Y.

not(expr)
     Return 1.0 if EXPR is zero, 0.0 otherwise.

pow(x, y)
     Compute the power of X elevated Y, it is equivalent to "(X)^(Y)".

print(t)

print(t, l)
     Print the value of expression T with loglevel L. If L is not specified then a default log level is used. Returns the value of the expression printed.

     Prints t with loglevel l

random(x)
     Return a pseudo random value between 0.0 and 1.0. X is the index of the internal variable which will be used to save the seed/state.

root(expr, max)
     Find an input value for which the function represented by EXPR with argument LD(0) is 0 in the interval 0..MAX.

     The expression in EXPR must denote a continuous function or the result is undefined.

     LD(0) is used to represent the function input value, which means that the given expression will be evaluated multiple times with various input values that the expression can access through ld(0). When the expression evaluates to 0 then the corresponding input value will be returned.

sin(x)
     Compute sine of X.

sinh(x)
     Compute hyperbolic sine of X.

sqrt(expr)
     Compute the square root of EXPR. This is equivalent to "(EXPR)^.5".

squish(x)
     Compute expression 1/(1 + exp(4*x)).

st(var, expr)
     Allow to store the value of the expression EXPR in an internal variable. VAR specifies the number of the variable where to store the value, and it is a value ranging from 0 to 9. The function returns the value stored in the internal variable. Note, Variables are currently not shared between expressions.

tan(x)
     Compute tangent of X.

tanh(x)
     Compute hyperbolic tangent of X.

taylor(expr, x)

taylor(expr, x, id)
     Evaluate a Taylor series at X, given an expression representing the ld(id)-th derivative of a function at 0.

     When the series does not converge the result is undefined.

     LD(ID) is used to represent the derivative order in EXPR, which means that the given expression will be evaluated multiple times with various input values that the expression can access through ld(id). If ID is not specified then 0 is assumed.

     Note, when you have the derivatives at y instead of 0, taylor(expr, x-y) can be used.

time(0)
     Return the current (wallclock) time in seconds.

trunc(expr)
     Round the value of expression EXPR towards zero to the nearest integer. For example, "trunc(-1.5)" is "-1.0".

while(cond, expr)
     Evaluate expression EXPR while the expression COND is non-zero, and returns the value of the last EXPR evaluation, or NAN if COND was always false.

The following constants are available:

PI
     area of the unit disc, approximately 3.14

E
     exp(1) (Euler's number), approximately 2.718

PHI
     golden ratio (1+sqrt(5))/2, approximately 1.618

Assuming that an expression is considered "true" if it has a non-zero value, note that:

* works like AND

+ works like OR

For example the construct:

     if (A AND B) then C

is equivalent to:

     if(A*B, C)

In your C code, you can extend the list of unary and binary functions, and define recognized constants, so that they are available for your expressions.

The evaluator also recognizes the International System unit prefixes. If 'i' is appended after the prefix, binary prefixes are used, which are based on powers of 1024 instead of powers of 1000. The 'B' postfix multiplies the value by 8, and can be appended after a unit prefix or used alone. This allows using for example 'KB', 'MiB', 'G' and 'B' as number postfix.

The list of available International System prefixes follows, with indication of the corresponding powers of 10 and of 2.

y
     10^-24 / 2^-80

z
     10^-21 / 2^-70

a
     10^-18 / 2^-60

f
     10^-15 / 2^-50

p
     10^-12 / 2^-40

n
     10^-9 / 2^-30

u
     10^-6 / 2^-20

m
     10^-3 / 2^-10

c
     10^-2

d
     10^-1

h
     10^2

k
     10^3 / 2^10

K
     10^3 / 2^10

M
     10^6 / 2^20

G
     10^9 / 2^30

T
     10^12 / 2^40

P
     10^15 / 2^40

E
     10^18 / 2^50

Z
     10^21 / 2^60

Y
     10^24 / 2^70

OpenCL Options
**************

When FFmpeg is configured with --enable-opencl, it is possible to set the options for the global OpenCL context.

The list of supported options follows:

build_options
     Set build options used to compile the registered kernels.

     See reference "OpenCL Specification Version: 1.2 chapter 5.6.4".

platform_idx
     Select the index of the platform to run OpenCL code.

     The specified index must be one of the indexes in the device list which can be obtained with av_opencl_get_device_list().

device_idx
     Select the index of the device used to run OpenCL code.

     The specifed index must be one of the indexes in the device list which can be obtained with av_opencl_get_device_list().