+### ==========================================================================
+### Section 2. High-level Configuration
+### ==========================================================================
+#
+# flag --- Comp switch --- Description
+# ----------------------------------------------------------------------------
+#
+# debug = yes/no --- -DNDEBUG --- Enable/Disable debug mode
+# sanitize = undefined/thread/no (-fsanitize )
+# --- ( undefined ) --- enable undefined behavior checks
+# --- ( thread ) --- enable threading error checks
+# optimize = yes/no --- (-O3/-fast etc.) --- Enable/Disable optimizations
+# arch = (name) --- (-arch) --- Target architecture
+# bits = 64/32 --- -DIS_64BIT --- 64-/32-bit operating system
+# prefetch = yes/no --- -DUSE_PREFETCH --- Use prefetch asm-instruction
+# popcnt = yes/no --- -DUSE_POPCNT --- Use popcnt asm-instruction
+# sse = yes/no --- -msse --- Use Intel Streaming SIMD Extensions
+# pext = yes/no --- -DUSE_PEXT --- Use pext x86_64 asm-instruction
+#
+# Note that Makefile is space sensitive, so when adding new architectures
+# or modifying existing flags, you have to make sure there are no extra spaces
+# at the end of the line for flag values.
+
+### 2.1. General and architecture defaults
+optimize = yes
+debug = no
+sanitize = no
+bits = 32
+prefetch = no
+popcnt = no
+sse = no
+pext = no
+
+### 2.2 Architecture specific
+
+ifeq ($(ARCH),general-32)
+ arch = any
+endif
+
+ifeq ($(ARCH),x86-32-old)
+ arch = i386
+endif
+
+ifeq ($(ARCH),x86-32)
+ arch = i386
+ prefetch = yes
+ sse = yes
+endif
+
+ifeq ($(ARCH),general-64)
+ arch = any
+ bits = 64
+endif
+
+ifeq ($(ARCH),x86-64)
+ arch = x86_64
+ bits = 64
+ prefetch = yes
+ sse = yes
+endif
+
+ifeq ($(ARCH),x86-64-modern)
+ arch = x86_64
+ bits = 64
+ prefetch = yes
+ popcnt = yes
+ sse = yes
+endif
+
+ifeq ($(ARCH),x86-64-bmi2)
+ arch = x86_64
+ bits = 64
+ prefetch = yes
+ popcnt = yes
+ sse = yes
+ pext = yes
+endif
+
+ifeq ($(ARCH),armv7)
+ arch = armv7
+ prefetch = yes
+endif
+
+ifeq ($(ARCH),ppc-32)
+ arch = ppc
+endif
+
+ifeq ($(ARCH),ppc-64)
+ arch = ppc64
+ bits = 64
+endif
+
+
+### ==========================================================================
+### Section 3. Low-level configuration
+### ==========================================================================
+
+### 3.1 Selecting compiler (default = gcc)
+
+CXXFLAGS += -Wall -Wcast-qual -fno-exceptions -std=c++11 $(EXTRACXXFLAGS)
+DEPENDFLAGS += -std=c++11
+LDFLAGS += $(EXTRALDFLAGS)
+
+ifeq ($(COMP),)
+ COMP=gcc
+endif
+
+ifeq ($(COMP),gcc)
+ comp=gcc
+ CXX=g++
+ CXXFLAGS += -pedantic -Wextra -Wshadow
+
+ ifeq ($(ARCH),armv7)
+ ifeq ($(OS),Android)
+ CXXFLAGS += -m$(bits)
+ LDFLAGS += -m$(bits)
+ endif
+ else
+ CXXFLAGS += -m$(bits)
+ LDFLAGS += -m$(bits)
+ endif
+
+ ifneq ($(KERNEL),Darwin)
+ LDFLAGS += -Wl,--no-as-needed
+ endif
+endif
+
+ifeq ($(COMP),mingw)
+ comp=mingw
+
+ ifeq ($(KERNEL),Linux)
+ ifeq ($(bits),64)
+ ifeq ($(shell which x86_64-w64-mingw32-c++-posix),)
+ CXX=x86_64-w64-mingw32-c++
+ else
+ CXX=x86_64-w64-mingw32-c++-posix
+ endif
+ else
+ ifeq ($(shell which i686-w64-mingw32-c++-posix),)
+ CXX=i686-w64-mingw32-c++
+ else
+ CXX=i686-w64-mingw32-c++-posix
+ endif
+ endif
+ else
+ CXX=g++
+ endif
+
+ CXXFLAGS += -Wextra -Wshadow
+ LDFLAGS += -static
+endif
+
+ifeq ($(COMP),icc)
+ comp=icc
+ CXX=icpc
+ CXXFLAGS += -diag-disable 1476,10120 -Wcheck -Wabi -Wdeprecated -strict-ansi
+endif
+
+ifeq ($(COMP),clang)
+ comp=clang
+ CXX=clang++
+ CXXFLAGS += -pedantic -Wextra -Wshadow
+
+ ifneq ($(KERNEL),Darwin)
+ ifneq ($(KERNEL),OpenBSD)
+ LDFLAGS += -latomic
+ endif
+ endif
+
+ ifeq ($(ARCH),armv7)
+ ifeq ($(OS),Android)
+ CXXFLAGS += -m$(bits)
+ LDFLAGS += -m$(bits)
+ endif
+ else
+ CXXFLAGS += -m$(bits)
+ LDFLAGS += -m$(bits)
+ endif
+endif
+
+ifeq ($(comp),icc)
+ profile_make = icc-profile-make
+ profile_use = icc-profile-use
+else
+ifeq ($(comp),clang)
+ profile_make = clang-profile-make
+ profile_use = clang-profile-use
+else
+ profile_make = gcc-profile-make
+ profile_use = gcc-profile-use
+endif
+endif
+
+ifeq ($(KERNEL),Darwin)
+ CXXFLAGS += -arch $(arch) -mmacosx-version-min=10.9
+ LDFLAGS += -arch $(arch) -mmacosx-version-min=10.9
+endif
+
+### Travis CI script uses COMPILER to overwrite CXX
+ifdef COMPILER
+ COMPCXX=$(COMPILER)
+endif
+
+### Allow overwriting CXX from command line
+ifdef COMPCXX
+ CXX=$(COMPCXX)
+endif
+
+### On mingw use Windows threads, otherwise POSIX
+ifneq ($(comp),mingw)
+ # On Android Bionic's C library comes with its own pthread implementation bundled in
+ ifneq ($(OS),Android)
+ # Haiku has pthreads in its libroot, so only link it in on other platforms
+ ifneq ($(KERNEL),Haiku)
+ LDFLAGS += -lpthread
+ endif
+ endif
+endif
+
+### 3.2.1 Debugging
+ifeq ($(debug),no)
+ CXXFLAGS += -DNDEBUG
+else
+ CXXFLAGS += -g
+endif
+
+### 3.2.2 Debugging with undefined behavior sanitizers
+ifneq ($(sanitize),no)
+ CXXFLAGS += -g3 -fsanitize=$(sanitize) -fuse-ld=gold
+ LDFLAGS += -fsanitize=$(sanitize) -fuse-ld=gold
+endif
+
+### 3.3 Optimization
+ifeq ($(optimize),yes)
+
+ CXXFLAGS += -O3
+
+ ifeq ($(comp),gcc)
+ ifeq ($(OS), Android)
+ CXXFLAGS += -fno-gcse -mthumb -march=armv7-a -mfloat-abi=softfp
+ endif
+ endif
+
+ ifeq ($(comp),$(filter $(comp),gcc clang icc))
+ ifeq ($(KERNEL),Darwin)
+ CXXFLAGS += -mdynamic-no-pic
+ endif
+ endif
+endif
+
+### 3.4 Bits
+ifeq ($(bits),64)
+ CXXFLAGS += -DIS_64BIT
+endif
+
+### 3.5 prefetch
+ifeq ($(prefetch),yes)
+ ifeq ($(sse),yes)
+ CXXFLAGS += -msse
+ DEPENDFLAGS += -msse
+ endif
+else
+ CXXFLAGS += -DNO_PREFETCH
+endif
+
+### 3.6 popcnt
+ifeq ($(popcnt),yes)
+ ifeq ($(comp),icc)
+ CXXFLAGS += -msse3 -DUSE_POPCNT
+ else
+ CXXFLAGS += -msse3 -mpopcnt -DUSE_POPCNT
+ endif
+endif
+
+### 3.7 pext
+ifeq ($(pext),yes)
+ CXXFLAGS += -DUSE_PEXT
+ ifeq ($(comp),$(filter $(comp),gcc clang mingw))
+ CXXFLAGS += -mbmi2
+ endif
+endif
+
+### 3.8 Link Time Optimization, it works since gcc 4.5 but not on mingw under Windows.
+### This is a mix of compile and link time options because the lto link phase
+### needs access to the optimization flags.
+ifeq ($(optimize),yes)
+ifeq ($(debug), no)
+ ifeq ($(comp),$(filter $(comp),gcc clang))
+ CXXFLAGS += -flto
+ LDFLAGS += $(CXXFLAGS)
+ endif
+
+ ifeq ($(comp),mingw)
+ ifeq ($(KERNEL),Linux)
+ CXXFLAGS += -flto
+ LDFLAGS += $(CXXFLAGS)
+ endif
+ endif
+endif
+endif
+
+### 3.9 Android 5 can only run position independent executables. Note that this
+### breaks Android 4.0 and earlier.
+ifeq ($(OS), Android)
+ CXXFLAGS += -fPIE
+ LDFLAGS += -fPIE -pie
+endif
+
+
+### ==========================================================================
+### Section 4. Public targets
+### ==========================================================================
+
+help:
+ @echo ""
+ @echo "To compile stockfish, type: "
+ @echo ""
+ @echo "make target ARCH=arch [COMP=compiler] [COMPCXX=cxx]"
+ @echo ""
+ @echo "Supported targets:"
+ @echo ""
+ @echo "build > Standard build"
+ @echo "profile-build > PGO build"
+ @echo "strip > Strip executable"
+ @echo "install > Install executable"
+ @echo "clean > Clean up"
+ @echo ""
+ @echo "Supported archs:"
+ @echo ""
+ @echo "x86-64 > x86 64-bit"
+ @echo "x86-64-modern > x86 64-bit with popcnt support"
+ @echo "x86-64-bmi2 > x86 64-bit with pext support"
+ @echo "x86-32 > x86 32-bit with SSE support"
+ @echo "x86-32-old > x86 32-bit fall back for old hardware"
+ @echo "ppc-64 > PPC 64-bit"
+ @echo "ppc-32 > PPC 32-bit"
+ @echo "armv7 > ARMv7 32-bit"
+ @echo "general-64 > unspecified 64-bit"
+ @echo "general-32 > unspecified 32-bit"
+ @echo ""
+ @echo "Supported compilers:"
+ @echo ""
+ @echo "gcc > Gnu compiler (default)"
+ @echo "mingw > Gnu compiler with MinGW under Windows"
+ @echo "clang > LLVM Clang compiler"
+ @echo "icc > Intel compiler"
+ @echo ""
+ @echo "Simple examples. If you don't know what to do, you likely want to run: "
+ @echo ""
+ @echo "make build ARCH=x86-64 (This is for 64-bit systems)"
+ @echo "make build ARCH=x86-32 (This is for 32-bit systems)"
+ @echo ""
+ @echo "Advanced examples, for experienced users: "
+ @echo ""
+ @echo "make build ARCH=x86-64 COMP=clang"
+ @echo "make profile-build ARCH=x86-64-modern COMP=gcc COMPCXX=g++-4.8"
+ @echo ""
+
+
+.PHONY: help build profile-build strip install clean objclean profileclean help \
+ config-sanity icc-profile-use icc-profile-make gcc-profile-use gcc-profile-make \
+ clang-profile-use clang-profile-make
+
+build: config-sanity
+ $(MAKE) ARCH=$(ARCH) COMP=$(COMP) all
+
+profile-build: config-sanity objclean profileclean
+ @echo ""
+ @echo "Step 1/4. Building instrumented executable ..."
+ $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_make)
+ @echo ""
+ @echo "Step 2/4. Running benchmark for pgo-build ..."
+ $(PGOBENCH) > /dev/null
+ @echo ""
+ @echo "Step 3/4. Building optimized executable ..."
+ $(MAKE) ARCH=$(ARCH) COMP=$(COMP) objclean
+ $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_use)
+ @echo ""
+ @echo "Step 4/4. Deleting profile data ..."
+ $(MAKE) ARCH=$(ARCH) COMP=$(COMP) profileclean
+
+strip:
+ strip $(EXE)
+
+install:
+ -mkdir -p -m 755 $(BINDIR)
+ -cp $(EXE) $(BINDIR)
+ -strip $(BINDIR)/$(EXE)
+
+#clean all
+clean: objclean profileclean
+ @rm -f .depend *~ core
+
+# clean binaries and objects
+objclean:
+ @rm -f $(EXE) $(EXE).exe *.o ./syzygy/*.o
+
+# clean auxiliary profiling files
+profileclean:
+ @rm -rf profdir
+ @rm -f bench.txt *.gcda ./syzygy/*.gcda *.gcno ./syzygy/*.gcno
+ @rm -f stockfish.profdata *.profraw
+
+default:
+ help
+
+### ==========================================================================
+### Section 5. Private targets
+### ==========================================================================