# Stockfish, a UCI chess playing engine derived from Glaurung 2.1
# Copyright (C) 2004-2008 Tord Romstad (Glaurung author)
-# Copyright (C) 2008-2010 Marco Costalba, Joona Kiiski, Tord Romstad
-#
-# This file is part of Stockfish.
+# Copyright (C) 2008-2013 Marco Costalba, Joona Kiiski, Tord Romstad
#
# Stockfish is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
### Section 1. General Configuration
### ==========================================================================
+### Establish the operating system name
+UNAME = $(shell uname)
+
### Executable name
EXE = stockfish
### Installation dir definitions
PREFIX = /usr/local
+# Haiku has a non-standard filesystem layout
+ifeq ($(UNAME),Haiku)
+ PREFIX=/boot/common
+endif
BINDIR = $(PREFIX)/bin
### Built-in benchmark for pgo-builds
PGOBENCH = ./$(EXE) bench 32 1 10 default depth
### Object files
-OBJS = application.o bitboard.o pawns.o material.o endgame.o evaluate.o main.o \
- misc.o move.o movegen.o history.o movepick.o search.o piece.o \
- position.o direction.o tt.o uci.o ucioption.o \
- mersenne.o book.o bitbase.o san.o benchmark.o timeman.o
-
+OBJS = benchmark.o bitbase.o bitboard.o book.o endgame.o evaluate.o main.o \
+ material.o misc.o movegen.o movepick.o notation.o pawns.o position.o \
+ search.o thread.o timeman.o tt.o uci.o ucioption.o
### ==========================================================================
### Section 2. High-level Configuration
# flag --- Comp switch --- Description
# ----------------------------------------------------------------------------
#
-# debug = no/yes --- -DNDEBUG --- Enable/Disable debug mode
+# debug = yes/no --- -DNDEBUG --- Enable/Disable debug mode
# optimize = yes/no --- (-O3/-fast etc.) --- Enable/Disable optimizations
-# arch = (name) --- (-arch) --- Target architecture
-# os = (name) --- --- Target operating system
-# bits = 64/32 --- -DIS_64BIT --- 64-/32-bit operating system
-# bigendian = no/yes --- -DBIGENDIAN --- big/little-endian byte order
-# prefetch = no/yes --- -DUSE_PREFETCH --- Use prefetch x86 asm-instruction
-# bsfq = no/yes --- -DUSE_BSFQ --- Use bsfq x86_64 asm-instruction
-# --- (Works only with GCC and ICC 64-bit)
-# popcnt = no/yes --- -DUSE_POPCNT --- Use popcnt x86_64 asm-instruction
+# arch = (name) --- (-arch) --- Target architecture
+# os = (name) --- --- Target operating system
+# bits = 64/32 --- -DIS_64BIT --- 64-/32-bit operating system
+# prefetch = yes/no --- -DUSE_PREFETCH --- Use prefetch x86 asm-instruction
+# bsfq = yes/no --- -DUSE_BSFQ --- Use bsfq x86_64 asm-instruction (only
+# with GCC and ICC 64-bit)
+# popcnt = yes/no --- -DUSE_POPCNT --- Use popcnt x86_64 asm-instruction
+# sse = yes/no --- -msse --- Use Intel Streaming SIMD Extensions
#
# Note that Makefile is space sensitive, so when adding new architectures
# or modifying existing flags, you have to make sure there are no extra spaces
arch = any
os = any
bits = 64
- bigendian = no
prefetch = no
bsfq = no
popcnt = no
+ sse = no
endif
ifeq ($(ARCH),general-32)
arch = any
os = any
bits = 32
- bigendian = no
- prefetch = no
- bsfq = no
- popcnt = no
-endif
-
-ifeq ($(ARCH),bigendian-64)
- arch = any
- os = any
- bits = 64
- bigendian = yes
- prefetch = no
- bsfq = no
- popcnt = no
-endif
-
-ifeq ($(ARCH),bigendian-32)
- arch = any
- os = any
- bits = 32
- bigendian = yes
prefetch = no
bsfq = no
popcnt = no
+ sse = no
endif
# x86-section
arch = x86_64
os = any
bits = 64
- bigendian = no
prefetch = yes
bsfq = yes
popcnt = no
+ sse = yes
endif
ifeq ($(ARCH),x86-64-modern)
arch = x86_64
os = any
bits = 64
- bigendian = no
prefetch = yes
bsfq = yes
popcnt = yes
+ sse = yes
endif
ifeq ($(ARCH),x86-32)
arch = i386
os = any
bits = 32
- bigendian = no
prefetch = yes
bsfq = no
popcnt = no
+ sse = yes
endif
ifeq ($(ARCH),x86-32-old)
arch = i386
os = any
bits = 32
- bigendian = no
prefetch = no
bsfq = no
popcnt = no
+ sse = no
+endif
+
+#arm section
+ifeq ($(ARCH),armv7)
+ arch = armv7
+ os = any
+ bits = 32
+ prefetch = yes
+ bsfq = yes
+ popcnt = no
+ sse = no
endif
# osx-section
arch = ppc64
os = osx
bits = 64
- bigendian = yes
prefetch = no
bsfq = no
popcnt = no
+ sse = no
endif
ifeq ($(ARCH),osx-ppc-32)
arch = ppc
os = osx
bits = 32
- bigendian = yes
prefetch = no
bsfq = no
popcnt = no
+ sse = no
endif
ifeq ($(ARCH),osx-x86-64)
arch = x86_64
os = osx
bits = 64
- bigendian = no
prefetch = yes
bsfq = yes
popcnt = no
+ sse = yes
endif
ifeq ($(ARCH),osx-x86-32)
arch = i386
os = osx
bits = 32
- bigendian = no
prefetch = yes
bsfq = no
popcnt = no
+ sse = yes
endif
COMP=gcc
endif
+ifeq ($(COMP),mingw)
+ comp=mingw
+ CXX=g++
+ profile_prepare = gcc-profile-prepare
+ profile_make = gcc-profile-make
+ profile_use = gcc-profile-use
+ profile_clean = gcc-profile-clean
+endif
+
ifeq ($(COMP),gcc)
comp=gcc
CXX=g++
profile_clean = icc-profile-clean
endif
+ifeq ($(COMP),clang)
+ comp=clang
+ CXX=clang++
+ profile_prepare = gcc-profile-prepare
+ profile_make = gcc-profile-make
+ profile_use = gcc-profile-use
+ profile_clean = gcc-profile-clean
+endif
+
### 3.2 General compiler settings
-CXXFLAGS = -g -Wall -Wcast-qual -ansi -fno-exceptions -fno-rtti $(EXTRACXXFLAGS)
+CXXFLAGS = -g -Wall -Wcast-qual -fno-exceptions -fno-rtti $(EXTRACXXFLAGS)
ifeq ($(comp),gcc)
- CXXFLAGS += -pedantic -Wno-long-long -Wextra
+ CXXFLAGS += -ansi -pedantic -Wno-long-long -Wextra -Wshadow
+endif
+
+ifeq ($(comp),mingw)
+ CXXFLAGS += -Wextra -Wshadow
endif
ifeq ($(comp),icc)
- CXXFLAGS += -wd383,869,981,10187,10188,11505,11503
+ CXXFLAGS += -wd383,981,1418,1419,1476,10187,10188,11505,11503 -Wcheck -Wabi -Wdeprecated -strict-ansi
+endif
+
+ifeq ($(comp),clang)
+ CXXFLAGS += -ansi -pedantic -Wno-long-long -Wextra -Wshadow
endif
ifeq ($(os),osx)
- CXXFLAGS += -arch $(arch)
+ CXXFLAGS += -arch $(arch) -mmacosx-version-min=10.0
endif
### 3.3 General linker settings
-LDFLAGS = -lpthread $(EXTRALDFLAGS)
+LDFLAGS = $(EXTRALDFLAGS)
+
+ifeq ($(comp),mingw)
+ LDFLAGS += -static-libstdc++ -static-libgcc
+endif
+
+### On mingw use Windows threads, otherwise POSIX
+ifneq ($(comp),mingw)
+ # Haiku has pthreads in its libroot, so only link it in on other platforms
+ ifneq ($(UNAME),Haiku)
+ LDFLAGS += -lpthread
+ endif
+endif
ifeq ($(os),osx)
- LDFLAGS += -arch $(arch)
+ LDFLAGS += -arch $(arch) -mmacosx-version-min=10.0
endif
### 3.4 Debugging
CXXFLAGS += -mdynamic-no-pic
endif
endif
+
+ ifeq ($(arch),armv7)
+ CXXFLAGS += -fno-gcse
+ endif
+ endif
+
+ ifeq ($(comp),mingw)
+ CXXFLAGS += -O3
endif
ifeq ($(comp),icc)
- CXXFLAGS += -fast
+ ifeq ($(os),osx)
+ CXXFLAGS += -fast -mdynamic-no-pic
+ else
+ CXXFLAGS += -O3
+ endif
+ endif
+
+ ifeq ($(comp),clang)
+ ### -O4 requires a linker that supports LLVM's LTO
+ CXXFLAGS += -O3
ifeq ($(os),osx)
- CXXFLAGS += -mdynamic-no-pic
+ ifeq ($(arch),i386)
+ CXXFLAGS += -mdynamic-no-pic
+ endif
+ ifeq ($(arch),x86_64)
+ CXXFLAGS += -mdynamic-no-pic
+ endif
endif
endif
endif
CXXFLAGS += -DIS_64BIT
endif
-### 3.7 Endianess
-ifeq ($(bigendian),yes)
- CXXFLAGS += -DBIGENDIAN
-endif
-
-### 3.8 prefetch
+### 3.7 prefetch
ifeq ($(prefetch),yes)
- CXXFLAGS += -msse
- DEPENDFLAGS += -msse
+ ifeq ($(sse),yes)
+ CXXFLAGS += -msse
+ DEPENDFLAGS += -msse
+ endif
else
CXXFLAGS += -DNO_PREFETCH
endif
-### 3.9 bsfq
+### 3.8 bsfq
ifeq ($(bsfq),yes)
CXXFLAGS += -DUSE_BSFQ
endif
-### 3.10 popcnt
+### 3.9 popcnt
ifeq ($(popcnt),yes)
- CXXFLAGS += -DUSE_POPCNT
+ CXXFLAGS += -msse3 -DUSE_POPCNT
+endif
+
+### 3.10 Link Time Optimization, it works since gcc 4.5 but not on mingw.
+### This is a mix of compile and link time options because the lto link phase
+### needs access to the optimization flags.
+ifeq ($(comp),gcc)
+ ifeq ($(optimize),yes)
+ GCC_MAJOR := `$(CXX) -dumpversion | cut -f1 -d.`
+ GCC_MINOR := `$(CXX) -dumpversion | cut -f2 -d.`
+ ifeq (1,$(shell expr \( $(GCC_MAJOR) \> 4 \) \| \( $(GCC_MAJOR) \= 4 \& $(GCC_MINOR) \>= 5 \)))
+ CXXFLAGS += -flto
+ LDFLAGS += $(CXXFLAGS)
+ endif
+ endif
endif
### ==========================================================================
### Section 4. Public targets
### ==========================================================================
-default:
- $(MAKE) ARCH=$(ARCH) COMP=$(COMP) build
-
help:
@echo ""
@echo "To compile stockfish, type: "
@echo ""
@echo "build > Build unoptimized version"
@echo "profile-build > Build PGO-optimized version"
- @echo "popcnt-profile-build > Build PGO-optimized version with optional popcnt-support"
@echo "strip > Strip executable"
@echo "install > Install executable"
@echo "clean > Clean up"
@echo "Supported archs:"
@echo ""
@echo "x86-64 > x86 64-bit"
- @echo "x86-64-modern > x86 64-bit with runtime support for popcnt-instruction"
- @echo "x86-32 > x86 32-bit excluding very old hardware without SSE-support"
+ @echo "x86-64-modern > x86 64-bit with runtime support for popcnt instruction"
+ @echo "x86-32 > x86 32-bit excluding old hardware without SSE-support"
@echo "x86-32-old > x86 32-bit including also very old hardware"
@echo "osx-ppc-64 > PPC-Mac OS X 64 bit"
@echo "osx-ppc-32 > PPC-Mac OS X 32 bit"
@echo "osx-x86-64 > x86-Mac OS X 64 bit"
@echo "osx-x86-32 > x86-Mac OS X 32 bit"
+ @echo "armv7 > ARMv7 32 bit"
@echo "general-64 > unspecified 64-bit"
@echo "general-32 > unspecified 32-bit"
- @echo "bigendian-64 > unspecified 64-bit with bigendian byte order"
- @echo "bigendian-32 > unspecified 32-bit with bigendian byte order"
@echo ""
@echo "Supported comps:"
@echo ""
@echo "gcc > Gnu compiler (default)"
@echo "icc > Intel compiler"
+ @echo "mingw > Gnu compiler with MinGW under Windows"
+ @echo "clang > LLVM Clang compiler"
@echo ""
@echo "Non-standard targets:"
@echo ""
@echo "Step 4/4. Deleting profile data ..."
$(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_clean)
-popcnt-profile-build:
- $(MAKE) ARCH=$(ARCH) COMP=$(COMP) config-sanity
- @echo ""
- @echo "Step 0/6. Preparing for profile build."
- $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_prepare)
- @echo ""
- @echo "Step 1/6. Building executable for benchmark (popcnt disabled)..."
- @touch *.cpp *.h
- $(MAKE) ARCH=x86-64 COMP=$(COMP) $(profile_make)
- @echo ""
- @echo "Step 2/6. Running benchmark for pgo-build (popcnt disabled)..."
- @$(PGOBENCH) > /dev/null
- @echo ""
- @echo "Step 3/6. Building executable for benchmark (popcnt enabled)..."
- @touch *.cpp *.h
- $(MAKE) ARCH=x86-64-modern COMP=$(COMP) $(profile_make)
- @echo ""
- @echo "Step 4/6. Running benchmark for pgo-build (popcnt enabled)..."
- @$(PGOBENCH) > /dev/null
- @echo ""
- @echo "Step 5/6. Building final executable ..."
- @touch *.cpp *.h
- $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_use)
- @echo ""
- @echo "Step 6/6. Deleting profile data ..."
- $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_clean)
- @echo ""
-
strip:
strip $(EXE)
-strip $(BINDIR)/$(EXE)
clean:
- $(RM) $(EXE) *.o .depend *~ core bench.txt *.gcda
+ $(RM) $(EXE) $(EXE).exe *.o .depend *~ core bench.txt *.gcda
testrun:
@$(PGOBENCH)
+default:
+ help
+
### ==========================================================================
### Section 5. Private targets
### ==========================================================================
@echo "arch: '$(arch)'"
@echo "os: '$(os)'"
@echo "bits: '$(bits)'"
- @echo "bigendian: '$(bigendian)'"
@echo "prefetch: '$(prefetch)'"
@echo "bsfq: '$(bsfq)'"
@echo "popcnt: '$(popcnt)'"
+ @echo "sse: '$(sse)'"
@echo ""
@echo "Flags:"
@echo "CXX: $(CXX)"
@test "$(debug)" = "yes" || test "$(debug)" = "no"
@test "$(optimize)" = "yes" || test "$(optimize)" = "no"
@test "$(arch)" = "any" || test "$(arch)" = "x86_64" || test "$(arch)" = "i386" || \
- test "$(arch)" = "ppc64" || test "$(arch)" = "ppc"
+ test "$(arch)" = "ppc64" || test "$(arch)" = "ppc" || test "$(arch)" = "armv7"
@test "$(os)" = "any" || test "$(os)" = "osx"
@test "$(bits)" = "32" || test "$(bits)" = "64"
- @test "$(bigendian)" = "yes" || test "$(bigendian)" = "no"
@test "$(prefetch)" = "yes" || test "$(prefetch)" = "no"
@test "$(bsfq)" = "yes" || test "$(bsfq)" = "no"
@test "$(popcnt)" = "yes" || test "$(popcnt)" = "no"
- @test "$(comp)" = "gcc" || test "$(comp)" = "icc"
+ @test "$(sse)" = "yes" || test "$(sse)" = "no"
+ @test "$(comp)" = "gcc" || test "$(comp)" = "icc" || test "$(comp)" = "mingw" || test "$(comp)" = "clang"
$(EXE): $(OBJS)
$(CXX) -o $@ $(OBJS) $(LDFLAGS)
gcc-profile-use:
$(MAKE) ARCH=$(ARCH) COMP=$(COMP) \
EXTRACXXFLAGS='-fprofile-use' \
+ EXTRALDFLAGS='-lgcov' \
all
gcc-profile-clean:
hpux:
$(MAKE) \
- CXX='/opt/aCC/bin/aCC -AA +hpxstd98 -DBIGENDIAN -mt +O3 -DNDEBUG -DNO_PREFETCH' \
+ CXX='/opt/aCC/bin/aCC -AA +hpxstd98 -mt +O3 -DNDEBUG -DNO_PREFETCH' \
CXXFLAGS="" \
LDFLAGS="" \
all