X-Git-Url: https://git.sesse.net/?a=blobdiff_plain;ds=sidebyside;f=Xserver%2Flib%2Ffont%2FSpeedo%2Fset_trns.c;fp=Xserver%2Flib%2Ffont%2FSpeedo%2Fset_trns.c;h=c3378cb0ce64aa848df540a762bd3bb577407f10;hb=b6e6afccf37f4ad0515ef2a698f714fdf1bf23b3;hp=0000000000000000000000000000000000000000;hpb=e3340a110a3b01756b8e67531395a33b40a17d37;p=rdpsrv diff --git a/Xserver/lib/font/Speedo/set_trns.c b/Xserver/lib/font/Speedo/set_trns.c new file mode 100644 index 0000000..c3378cb --- /dev/null +++ b/Xserver/lib/font/Speedo/set_trns.c @@ -0,0 +1,1329 @@ +/* $XConsortium: set_trns.c,v 1.6 94/02/10 11:05:59 gildea Exp $ */ + +/* + +Copyright 1989-1991, Bitstream Inc., Cambridge, MA. +You are hereby granted permission under all Bitstream propriety rights to +use, copy, modify, sublicense, sell, and redistribute the Bitstream Speedo +software and the Bitstream Charter outline font for any purpose and without +restrictions; provided, that this notice is left intact on all copies of such +software or font and that Bitstream's trademark is acknowledged as shown below +on all unmodified copies of such font. + +BITSTREAM CHARTER is a registered trademark of Bitstream Inc. + + +BITSTREAM INC. DISCLAIMS ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING +WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A +PARTICULAR PURPOSE. BITSTREAM SHALL NOT BE LIABLE FOR ANY DIRECT OR INDIRECT +DAMAGES, INCLUDING BUT NOT LIMITED TO LOST PROFITS, LOST DATA, OR ANY OTHER +INCIDENTAL OR CONSEQUENTIAL DAMAGES, ARISING OUT OF OR IN ANY WAY CONNECTED +WITH THE SPEEDO SOFTWARE OR THE BITSTREAM CHARTER OUTLINE FONT. + +*/ + + + +/*************************** S E T _ T R N S . C ***************************** + * * + * This module is called from do_char.c to set up the intelligent * + * transformation for one character (or sub-character of a composite * + * character. + * * + ****************************************************************************/ + + +#include "spdo_prv.h" /* General definitions for Speedo */ + +#define DEBUG 0 + +#if DEBUG +#include +#define SHOW(X) printf("X = %d\n", X) +#else +#define SHOW(X) +#endif +/***** LOCAL MACROS *****/ + +#define SQUEEZE_X_ORU(A,B,C) ((((fix31)A * (fix31)B) + C) >> 16) +#define ABS(A) ((A < 0)? -A:A) /* absolute value */ +#define IMPORT_FACTOR \ + shift = 16;\ + while (*x_factor > (0x7fffffffL / (isw_scale >> (16 - shift))))\ + shift--;\ + *x_factor = (*x_factor * (isw_scale>>(16-shift))) >> shift; + +/***** GLOBAL VARIABLES *****/ + +/***** GLOBAL FUNCTIONS *****/ + +/***** EXTERNAL VARIABLES *****/ + +/***** EXTERNAL FUNCTIONS *****/ + +/***** STATIC VARIABLES *****/ + +/***** STATIC FUNCTIONS *****/ + +#if PROTOS_AVAIL +static void sp_constr_update(PROTO_DECL1); +static ufix8 FONTFAR *sp_setup_pix_table(PROTO_DECL2 ufix8 FONTFAR *pointer,boolean short_form,fix15 no_X_ctrl_zones,fix15 no_Y_ctrl_zones); +static ufix8 FONTFAR *sp_setup_int_table(PROTO_DECL2 ufix8 FONTFAR *pointer,fix15 no_X_int_zones,fix15 no_Y_int_zones); +#else +static void sp_constr_update(); /* Update constraint table */ +static ufix8 FONTFAR *sp_setup_pix_table(); /* Read control zone table */ +static ufix8 FONTFAR *sp_setup_int_table(); /* Read interpolation zone table */ +#endif + + +FUNCTION void init_tcb() +GDECL +/* + * Called by sp_make_char() and make_comp_char() to initialize the current + * transformation control block to the top level transformation. + */ +{ +sp_globals.tcb = sp_globals.tcb0; +} + +FUNCTION void scale_tcb(ptcb, x_pos, y_pos, x_scale, y_scale) +GDECL +tcb_t GLOBALFAR *ptcb; /* Transformation control block */ +fix15 x_pos; /* X position (outline res units) */ +fix15 y_pos; /* Y position (outline res units) */ +fix15 x_scale; /* X scale factor * ONE_SCALE */ +fix15 y_scale; /* Y scale factor * ONE_SCALE */ +/* + * Called by make_comp_char() to apply position and scale for each of the + * components of a compound character. + */ +{ +fix15 xx_mult = ptcb->xxmult; +fix15 xy_mult = ptcb->xymult; +fix31 x_offset = ptcb->xoffset; +fix15 yx_mult = ptcb->yxmult; +fix15 yy_mult = ptcb->yymult; +fix31 y_offset = ptcb->yoffset; + +ptcb->xxmult = TRANS(xx_mult, x_scale, (fix31)SCALE_RND, SCALE_SHIFT); +ptcb->xymult = TRANS(xy_mult, y_scale, (fix31)SCALE_RND, SCALE_SHIFT); +ptcb->xoffset = MULT16(xx_mult, x_pos) + MULT16(xy_mult, y_pos) + x_offset; +ptcb->yxmult = TRANS(yx_mult, x_scale, (fix31)SCALE_RND, SCALE_SHIFT); +ptcb->yymult = TRANS(yy_mult, y_scale, (fix31)SCALE_RND, SCALE_SHIFT); +ptcb->yoffset = MULT16(yx_mult, x_pos) + MULT16(yy_mult, y_pos) + y_offset; + +type_tcb(ptcb); /* Reclassify transformation types */ +} + +FUNCTION ufix8 FONTFAR *skip_interpolation_table(pointer,format) +GDECL +ufix8 FONTFAR *pointer; /* Pointer to next byte in char data */ +ufix8 format; /* Character format byte */ +{ +fix15 i,n; +ufix8 intsize[9]; + +intsize[0] = 1; +intsize[1] = 2; +intsize[2] = 3; +intsize[3] = 1; +intsize[4] = 2; +intsize[5] = 1; +intsize[6] = 2; +intsize[7] = 0; +intsize[8] = 0; + +n = ((format & BIT6)? (fix15)NEXT_BYTE(pointer): 0) + + ((format & BIT7)? (fix15)NEXT_BYTE(pointer): 0); +for (i = 0; i < n; i++) /* For each entry in int table ... */ + { + format = NEXT_BYTE(pointer); /* Read format byte */ + if (format & BIT7) /* Short Start/End point spec? */ + { + pointer++; /* Skip Start/End point byte */ + } + else + { + pointer += intsize[format & 0x7]; /* Skip Start point spec */ + pointer += intsize[(format >> 3) & 0x7]; /* Skip End point spec */ + } + } +return pointer; +} +FUNCTION ufix8 FONTFAR *skip_control_zone(pointer,format) +GDECL +ufix8 FONTFAR *pointer; /* Pointer to next byte in char data */ +ufix8 format; /* Character format byte */ +{ +fix15 i,n; +ufix16 tmpufix16; +fix15 constr; + +n = sp_globals.no_X_orus + sp_globals.no_Y_orus - 2; +for (i = 0; i < n; i++) /* For each entry in control table ... */ + { + if (format & BIT4) + pointer++; /* Skip short form From/To fields */ + else + pointer += 2; /* Skip FROM and TO fields */ + /* skip constraints field */ + constr = NEXT_BYTES (pointer, tmpufix16); + + } +return pointer; +} + +#if INCL_RULES +#else +FUNCTION ufix8 FONTFAR *plaid_tcb(pointer, format) +GDECL +ufix8 FONTFAR *pointer; /* Pointer to next byte in char data */ +ufix8 format; /* Character format byte */ +/* + * Called by make_simp_char() and make_comp_char() to set up the controlled + * coordinate table and skip all other intelligent scaling rules embedded + * in the character data. + * Updates pointer to first byte after plaid data. + * This is used only if intelligent scaling is not supported in the + * configuration definitions. + */ +{ +fix15 i, n; + + + +sp_globals.no_X_orus = (format & BIT2)? + (fix15)NEXT_BYTE(pointer): + 0; +sp_globals.no_Y_orus = (format & BIT3)? + (fix15)NEXT_BYTE(pointer): + 0; +pointer = read_oru_table(pointer); /* Updates no_X/Y/orus */ +sp_globals.Y_edge_org = sp_globals.no_X_orus; + +/* Skip over control zone table */ +pointer = skip_control_zone(pointer,format); + +/* Skip over interpolation table */ +pointer = skip_interpolation_table(pointer,format); +return pointer; +} +#endif + +#if INCL_RULES +FUNCTION ufix8 FONTFAR *plaid_tcb(pointer, format) +GDECL +ufix8 FONTFAR *pointer; /* Pointer to next byte in char data */ +ufix8 format; /* Character format byte */ +/* + * Called by make_simp_char() and make_comp_char() to set up the controlled + * coordinate table and process all intelligent scaling rules embedded + * in the character data. + * Updates pointer to first byte after plaid data. + * This is used only if intelligent scaling is enabled in the + * configuration definitions. + */ +{ +fix15 no_X_ctrl_zones; +fix15 no_Y_ctrl_zones; +fix15 no_X_int_zones; +fix15 no_Y_int_zones; + +#if INCL_PLAID_OUT /* Plaid data monitoring included? */ +begin_plaid_data(); +#endif + +sp_constr_update(); /* Update constraint table if required */ + +sp_globals.no_X_orus = (format & BIT2)? + (fix15)NEXT_BYTE(pointer): + 0; +sp_globals.no_Y_orus = (format & BIT3)? + (fix15)NEXT_BYTE(pointer): + 0; +pointer = read_oru_table(pointer); /* Updates no_X/Y/orus to include zero values */ +sp_globals.Y_edge_org = sp_globals.no_X_orus; +if (sp_globals.no_X_orus > 1) /* 2 or more controlled X coordinates? */ + sp_globals.tcb.xmode = sp_globals.tcb.xtype; /* Enable intelligent scaling in X */ + +if (sp_globals.no_Y_orus > 1) /* 2 or more controlled Y coordinates? */ + sp_globals.tcb.ymode = sp_globals.tcb.ytype; /* Enable intelligent scaling in Y */ + +no_X_ctrl_zones = sp_globals.no_X_orus - 1; +no_Y_ctrl_zones = sp_globals.no_Y_orus - 1; +pointer = sp_setup_pix_table(pointer, (boolean)(format & BIT4), + no_X_ctrl_zones, no_Y_ctrl_zones); + +no_X_int_zones = (format & BIT6)? + (fix15)NEXT_BYTE(pointer): + 0; +no_Y_int_zones = (format & BIT7)? + (fix15)NEXT_BYTE(pointer): + 0; +sp_globals.Y_int_org = no_X_int_zones; +pointer = sp_setup_int_table(pointer, no_X_int_zones, no_Y_int_zones); + +#if INCL_PLAID_OUT /* Plaid data monitoring included? */ +end_plaid_data(); +#endif + +return pointer; +} +#endif + +#if INCL_RULES +FUNCTION static void sp_constr_update() +GDECL +/* + * Called by plaid_tcb() to update the constraint table for the current + * transformation. + * This is always carried out whenever a character is generated following + * a change of font or scale factor or after initialization. + */ +{ +fix31 ppo; +fix15 xppo; +fix15 yppo; +ufix8 FONTFAR *pointer; +fix15 no_X_constr; +fix15 no_Y_constr; +fix15 i, j, k, l, n; +fix15 ppm; +ufix8 format; +ufix8 format1; +fix15 limit; +ufix16 constr_org; +fix15 constr_nr; +fix15 size; +fix31 off; +fix15 min; +fix15 orus; +fix15 pix; +ufix16 tmpufix16; /* in extended mode, macro uses secnd term */ + +if (sp_globals.constr.data_valid && /* Constr table already done and ... */ + (sp_globals.tcb.xppo == sp_globals.constr.xppo) && /* ... X pix per oru unchanged and ... */ + (sp_globals.tcb.yppo == sp_globals.constr.yppo)) /* ... Y pix per oru unchanged? */ + { + return; /* No need to update constraint table */ + } + +sp_globals.constr.xppo = xppo = sp_globals.tcb.xppo; /* Update X pixels per oru indicator */ +sp_globals.constr.yppo = yppo = sp_globals.tcb.yppo; /* Update Y pixels per oru indicator */ +sp_globals.constr.data_valid = TRUE; /* Mark constraint table valid */ + +pointer = sp_globals.constr.org; /* Point to first byte of constraint data */ +no_X_constr = NEXT_BYTES(pointer, tmpufix16); /* Read nmbr of X constraints */ +no_Y_constr = NEXT_BYTES(pointer, tmpufix16); /* Read nmbr of Y constraints */ + +i = 0; +constr_org = 0; +n = no_X_constr; +ppo = xppo; +for (j = 0; ; j++) + { + sp_globals.c_act[i] = FALSE; /* Flag constraint 0 not active */ + sp_globals.c_pix[i++] = 0; /* Constraint 0 implies no minimum */ + sp_globals.c_act[i] = FALSE; /* Flag constraint 1 not active */ + sp_globals.c_pix[i++] = sp_globals.onepix; /* Constraint 1 implies min 1 pixel*/ + ppm = (ppo * (fix31)sp_globals.orus_per_em) >> sp_globals.multshift; + for (k = 0; k < n; k++) + { + format = NEXT_BYTE(pointer); /* Read format byte */ + limit = (fix15)NEXT_BYTE(pointer); /* Read limit field */ + sp_globals.c_act[i] = + ((ppm < limit) || (limit == 255)) && + sp_globals.constr.active; + if (sp_globals.c_act[i]) /* Constraint active? */ + { + if ((format & BIT1) && /* Constraint specified and ... */ + (constr_nr = constr_org + + ((format & BIT0)? /* Read unsigned constraint value */ + NEXT_WORD(pointer): + (fix15)NEXT_BYTE(pointer)), + sp_globals.c_act[constr_nr])) /* ... and specified constraint active? */ + { + pix = sp_globals.c_pix[constr_nr]; /* Use constrained pixel value */ + format1 = format; + for (l = 2; l > 0; l--) /* Skip 2 arguments */ + { + format1 >>= 2; + if (size = format1 & 0x03) + pointer += size - 1; + } + } + else /* Constraint absent or inactive? */ + { + orus = (format & BIT2)? /* Read unsigned oru value */ + NEXT_WORD(pointer): + (fix15)NEXT_BYTE(pointer); + + if (format & BIT5) /* Specified offset value? */ + { + off = (fix31)((format & BIT4)? /* Read offset value */ + NEXT_WORD(pointer): + (fix7)NEXT_BYTE(pointer)); + off = (off << (sp_globals.multshift - 6)) + sp_globals.multrnd; + } + else /* Unspecified (zero) offset value? */ + { + off = sp_globals.multrnd; + } + + pix = (fix15)(((fix31)orus * ppo + off) / (1 << sp_globals.mpshift)) & sp_globals.pixfix; + } + } + else /* Constraint inactive? */ + { + format1 = format; + for (l = 3; l > 0; l--) /* Skip over 3 arguments */ + { + if (size = format1 & 0x03) + pointer += size - 1; + format1 >>= 2; + } + pix = 0; + } + + if (format & 0xc0) /* Specified minimum value? */ + { + min = (format & BIT7)? /* Read unsigned minimum value */ + (fix15)NEXT_BYTE(pointer) << sp_globals.pixshift: + sp_globals.onepix; + } + else /* Unspecified (zero) minimum value? */ + { + min = 0; + } + + sp_globals.c_pix[i] = (pix < min)? min: pix; + i++; + } + if (j) break; /* Finished if second time around loop */ + constr_org = sp_globals.Y_constr_org = i; + n = no_Y_constr; + ppo = yppo; + } + +#if DEBUG +printf("\nCONSTRAINT TABLE\n"); +n = no_X_constr + 2; +for (i = 0; i < n; i++) + { + printf("%3d ", i); + if (sp_globals.c_act[i]) + { + printf("T "); + } + else + { + printf("F "); + } + printf("%5.1f\n", ((real)sp_globals.c_pix[i] / (real)sp_globals.onepix)); + } +printf("--------------\n"); +n = no_Y_constr + 2; +for (i = 0; i < n; i++) + { + j = i + sp_globals.Y_constr_org; + printf("%3d ", i); + if (sp_globals.c_act[j]) + { + printf("T "); + } + else + { + printf("F "); + } + printf("%5.1f\n", ((real)sp_globals.c_pix[j] / (real)sp_globals.onepix)); + } +#endif + +} +#endif + +FUNCTION ufix8 FONTFAR *read_oru_table(pointer) +GDECL +ufix8 FONTFAR *pointer; /* Pointer to first byte in controlled coord table */ +/* + * Called by plaid_tcb() to read the controlled coordinate table from the + * character data in the font. + * Updates the pointer to the byte following the controlled coordinate + * data. + */ +{ +fix15 i, j, k, n; +boolean zero_not_in; +boolean zero_added; +fix15 oru; + +#if INCL_RULES +fix15 pos; +#endif + +i = 0; +n = sp_globals.no_X_orus; +#if INCL_RULES +pos = sp_globals.tcb.xpos; +#endif +for (j = 0; ; j++) + { + zero_not_in = TRUE; + zero_added = FALSE; + for (k = 0; k < n; k++) + { + oru = NEXT_WORD(pointer); + if (zero_not_in && (oru >= 0)) /* First positive oru value? */ + { +#if INCL_RULES + sp_plaid.pix[i] = pos; /* Insert position in pix array */ +#endif + if (oru != 0) /* Zero oru value omitted? */ + { + sp_plaid.orus[i++] = 0; /* Insert zero value in oru array */ + zero_added = TRUE; /* Remember to increment size of array */ + } + zero_not_in = FALSE; /* Inhibit further testing for zero ins */ + } + sp_plaid.orus[i++] = oru; /* Add specified oru value to array */ + } + if (zero_not_in) /* All specified oru values negative? */ + { +#if INCL_RULES + sp_plaid.pix[i] = pos; /* Insert position in pix array */ +#endif + sp_plaid.orus[i++] = 0; /* Add zero oru value */ + zero_added = TRUE; /* Remember to increment size of array */ + } + if (j) /* Both X and Y orus read? */ + break; + if (zero_added) + sp_globals.no_X_orus++; /* Increment X array size */ + n = sp_globals.no_Y_orus; /* Prepare to read Y oru values */ +#if INCL_RULES + pos = sp_globals.tcb.ypos; +#endif + } +if (zero_added) /* Zero Y oru value added to array? */ + sp_globals.no_Y_orus++; /* Increment Y array size */ + +#if DEBUG +printf("\nX ORUS\n"); +n = sp_globals.no_X_orus; +for (i = 0; i < n; i++) + { + printf("%2d %4d\n", i, sp_plaid.orus[i]); + } +printf("\nY ORUS\n"); +n = sp_globals.no_Y_orus; +for (i = 0; i < n; i++) + { + printf("%2d %4d\n", i, sp_plaid.orus[i + sp_globals.no_X_orus]); + } +#endif + +return pointer; /* Update pointer */ +} +#if INCL_SQUEEZING || INCL_ISW +FUNCTION static void calculate_x_pix(start_edge, end_edge, constr_nr, + x_scale, x_offset, ppo, setwidth_pix) +GDECL +ufix8 start_edge, end_edge; +ufix16 constr_nr; +fix31 x_scale; +fix31 x_offset; +fix31 ppo; +fix15 setwidth_pix; +/* + * Called by sp_setup_pix_table() when X squeezing is necessary + * to insert the correct edge in the global pix array + */ +{ +fix15 zone_pix; +fix15 start_oru, end_oru; + +/* compute scaled oru coordinates */ +start_oru= (fix15)(SQUEEZE_X_ORU(sp_plaid.orus[start_edge], x_scale, x_offset)); +end_oru = (fix15)(SQUEEZE_X_ORU(sp_plaid.orus[end_edge], x_scale, x_offset)); + +if (!sp_globals.c_act[constr_nr]) /* constraint inactive */ + { + /* calculate zone width */ + zone_pix = (fix15)(((((fix31)end_oru - (fix31)start_oru) * ppo) / + (1< 0) && (zone_pix < 0)) + zone_pix = 0x7ffff; + /* check for minimum */ + if ((ABS(zone_pix)) >= sp_globals.c_pix[constr_nr]) + goto Lx; + } +/* use the zone size from the constr table - scale it */ +zone_pix = (fix15)(((SQUEEZE_MULT(x_scale,sp_globals.c_pix[constr_nr])) + + sp_globals.pixrnd) & sp_globals.pixfix); + +/* look for overflow */ +if ((sp_globals.c_pix[constr_nr] > 0) && (zone_pix < 0)) + zone_pix = 0x7fff; + +if (start_edge > end_edge) + { + zone_pix = -zone_pix; + } +Lx: +/* assign pixel value to global pix array */ +sp_plaid.pix[end_edge]=sp_plaid.pix[start_edge] + zone_pix; + +/* check for overflow */ +if (((sp_plaid.pix[start_edge] >0) && (zone_pix >0)) && + (sp_plaid.pix[end_edge] < 0)) + sp_plaid.pix[end_edge] = 0x7fff; /* set it to the max */ + +/* be sure to be in the setwidth !*/ +#if INCL_ISW +if (!sp_globals.import_setwidth_act) /* only check left edge if not isw only */ +#endif +if ((sp_globals.pspecs->flags & SQUEEZE_LEFT) && (sp_plaid.pix[end_edge] < 0)) + sp_plaid.pix[end_edge] = 0; +if ((sp_globals.pspecs->flags & SQUEEZE_RIGHT) && + (sp_plaid.pix[end_edge] > setwidth_pix)) + sp_plaid.pix[end_edge] = setwidth_pix; + +} +#endif + +#if INCL_SQUEEZING +FUNCTION static void calculate_y_pix(start_edge, end_edge,constr_nr, + top_scale, bottom_scale,ppo,em_top_pix, em_bot_pix) +GDECL +ufix8 start_edge, end_edge; +ufix16 constr_nr; +fix31 top_scale, bottom_scale; +fix31 ppo; +fix15 em_top_pix, em_bot_pix; + +/* + * Called by sp_setup_pix_table() when Y squeezing is necessary + * to insert the correct edge in the global pix array + */ +{ +fix15 zone_pix; +fix15 start_oru, end_oru; +fix31 zone_width, above_base, below_base; + +/* check whether edge is above or below the baseline */ +/* and apply appropriate scale factor to get scaled oru coordinates */ +if (sp_plaid.orus[start_edge] < 0) + start_oru =(fix15)(SQUEEZE_MULT(sp_plaid.orus[start_edge], bottom_scale)); +else + start_oru =(fix15)(SQUEEZE_MULT(sp_plaid.orus[start_edge], top_scale)); + +if (sp_plaid.orus[end_edge] < 0) + end_oru =(fix15)(SQUEEZE_MULT(sp_plaid.orus[end_edge], bottom_scale)); +else + end_oru =(fix15)(SQUEEZE_MULT(sp_plaid.orus[end_edge], top_scale)); + +if (!sp_globals.c_act[constr_nr]) /* Constraint inactive? */ + { + /* calculate zone width */ + zone_pix = (fix15)(((((fix31)end_oru - (fix31)start_oru) * ppo) + >> sp_globals.mpshift)+ sp_globals.pixrnd) & sp_globals.pixfix; + /* check minimum */ + if ((ABS(zone_pix)) >= sp_globals.c_pix[constr_nr]) + goto Ly; + } + +/* Use zone size from constr table */ +if ((end_oru >= 0) && (start_oru >=0)) + /* all above baseline */ + zone_pix = (fix15)(SQUEEZE_MULT(top_scale, sp_globals.c_pix[constr_nr])); +else if ((end_oru <= 0) && (start_oru <=0)) + /* all below baseline */ + zone_pix = (fix15)(SQUEEZE_MULT(bottom_scale, sp_globals.c_pix[constr_nr])); +else + { + /* mixture */ + if (start_oru > 0) + { + zone_width = start_oru - end_oru; + /* get % above baseline in 16.16 fixed point */ + above_base = (((fix31)start_oru) << 16) / + ((fix31)zone_width) ; + /* get % below baseline in 16.16 fixed point */ + below_base = (((fix31)-end_oru) << 16) / + ((fix31)zone_width) ; + } + else + { + zone_width = end_oru - start_oru; + /* get % above baseline in 16.16 fixed point */ + above_base = (((fix31)-start_oru) << 16) / + ((fix31)zone_width) ; + /* get % below baseline in 16.16 fixed point */ + below_base = (((fix31)end_oru) << 16) / + ((fix31)zone_width) ; + } + /* % above baseline * total zone * top_scale + */ + /* % below baseline * total zone * bottom_scale */ + zone_pix = ((((above_base * (fix31)sp_globals.c_pix[constr_nr]) >> 16) * + top_scale) + + (((below_base * (fix31)sp_globals.c_pix[constr_nr]) >> 16) * + bottom_scale)) >> 16; + } + +/* make this zone pix fall on a pixel boundary */ +zone_pix = (zone_pix + sp_globals.pixrnd) & sp_globals.pixfix; + +/* if minimum is in effect make the zone one pixel */ +if ((sp_globals.c_pix[constr_nr] != 0) && (zone_pix < sp_globals.onepix)) + zone_pix = sp_globals.onepix; + +if (start_edge > end_edge) + { + zone_pix = -zone_pix; /* Use negatve zone size */ + } +Ly: +/* assign global pix value */ +sp_plaid.pix[end_edge] = sp_plaid.pix[start_edge] + zone_pix; /* Insert end pixels */ + +/* make sure it is in the EM !*/ +if ((sp_globals.pspecs->flags & SQUEEZE_TOP) && + (sp_plaid.pix[end_edge] > em_top_pix)) + sp_plaid.pix[end_edge] = em_top_pix; +if ((sp_globals.pspecs->flags & SQUEEZE_BOTTOM) && + (sp_plaid.pix[end_edge] < em_bot_pix)) + sp_plaid.pix[end_edge] = em_bot_pix; +} + +FUNCTION boolean calculate_x_scale(x_factor, x_offset, no_X_ctrl_zones) +GDECL +fix31 *x_factor; +fix31 *x_offset; +fix15 no_X_ctrl_zones; /* Number of X control zones */ +/* + * Called by sp_setup_pix_table() when squeezing is included + * to determine whether X scaling is necessary. If it is, the + * scale factor and offset are computed. This function returns + * a boolean value TRUE = X squeezind is necessary, FALSE = no + * X squeezing is necessary. + */ +{ +boolean squeeze_left, squeeze_right; +boolean out_on_right, out_on_left; +fix15 bbox_width,set_width; +fix15 bbox_xmin, bbox_xmax; +fix15 x_offset_pix; +fix15 i; +#if INCL_ISW +fix31 isw_scale; +fix15 shift; +#endif + + +/* set up some flags and common calculations */ +squeeze_left = (sp_globals.pspecs->flags & SQUEEZE_LEFT)? TRUE:FALSE; +squeeze_right = (sp_globals.pspecs->flags & SQUEEZE_RIGHT)? TRUE:FALSE; +bbox_xmin = sp_globals.bbox_xmin_orus; +bbox_xmax = sp_globals.bbox_xmax_orus; +set_width = sp_globals.setwidth_orus; + +if (bbox_xmax > set_width) + out_on_right = TRUE; +else + out_on_right = FALSE; +if (bbox_xmin < 0) + out_on_left = TRUE; +else + out_on_left = FALSE; +bbox_width =bbox_xmax - bbox_xmin; + +/* + * don't need X squeezing if: + * - X squeezing not enabled + * - bbox doesn't violate on left or right + * - left squeezing only is enabled and char isn't out on left + * - right squeezing only is enabled and char isn't out on right + */ + +if ((!squeeze_left && !squeeze_right) || + (!out_on_right && !out_on_left) || + (squeeze_left && !squeeze_right && !out_on_left) || + (squeeze_right && !squeeze_left && !out_on_right)) + return FALSE; + +#if INCL_ISW +if (sp_globals.import_setwidth_act) + { + /* if both isw and squeezing is going on - let the imported */ + /* setwidth factor be factored in with the squeeze */ + isw_scale = compute_isw_scale(); + /*sp_globals.setwidth_orus = sp_globals.imported_width;*/ + } +else + isw_scale = 0x10000L; /* 1 in 16.16 notation */ +#endif + +/* squeezing on left and right ? */ +if (squeeze_left && squeeze_right) + { + /* calculate scale factor */ + if (bbox_width < set_width) + *x_factor = 0x10000L; /* 1 in 16.16 notation */ + else + *x_factor = ((fix31)set_width<<16)/(fix31)bbox_width; +#if INCL_ISW + IMPORT_FACTOR +#endif + /* calculate offset */ + if (out_on_left) /* fall out on left ? */ + *x_offset = -(fix31)*x_factor * (fix31)bbox_xmin; + /* fall out on right and I am shifting only ? */ + else if (out_on_right && (*x_factor == 0x10000L)) + *x_offset = -(fix31)*x_factor * (fix31)(bbox_xmax - set_width); + else + *x_offset = 0x0L; /* 0 in 16.16 notation */ + } +/* squeezing on left only and violates left */ +else if (squeeze_left) + { + if (bbox_width < set_width) /* will it fit if I shift it ? */ + *x_factor = 0x10000L; /* 1 in 16.16 notation */ + else if (out_on_right) + *x_factor = ((fix31)set_width<<16)/(fix31)bbox_width; + else + *x_factor = ((fix31)set_width<<16)/ + (fix31)(bbox_width - (bbox_xmax-set_width)); +#if INCL_ISW + IMPORT_FACTOR +#endif + *x_offset = (fix31)-*x_factor * (fix31)bbox_xmin; + } + +/* I must be squeezing on right, and violates right */ +else + { + if (bbox_width < set_width) /* will it fit if I shift it ? */ + { /* just shift it left - it will fit in the bbox */ + *x_factor = 0x10000L; /* 1 in 16.16 notation */ +#if INCL_ISW + IMPORT_FACTOR +#endif + *x_offset = (fix31)-*x_factor * (fix31)bbox_xmin; + } + else if (out_on_left) + { + *x_factor = ((fix31)set_width<<16)/(fix31)bbox_width; +#if INCL_ISW + IMPORT_FACTOR +#endif + *x_offset = 0x0L; /* 0 in 16.16 notation */ + } + else + { + *x_factor = ((fix31)set_width<<16)/(fix31)bbox_xmax; +#if INCL_ISW + IMPORT_FACTOR +#endif + *x_offset = 0x0L; /* 0 in 16.16 notation */ + } + } + +x_offset_pix = (fix15)(((*x_offset >> 16) * sp_globals.tcb0.xppo) + / (1<0) && (x_offset_pix < sp_globals.onepix)) + x_offset_pix = sp_globals.onepix; + +/* look for the first non-negative oru value, scale and add the offset */ +/* to the corresponding pixel value - note that the pixel value */ +/* is set in read_oru_table. */ + +/* look at all the X edges */ +for (i=0; i < (no_X_ctrl_zones+1); i++) + if (sp_plaid.orus[i] >= 0) + { + sp_plaid.pix[i] = (SQUEEZE_MULT(sp_plaid.pix[i], *x_factor) + +sp_globals.pixrnd + x_offset_pix) & sp_globals.pixfix; + break; + } + +return TRUE; +} + +FUNCTION boolean calculate_y_scale(top_scale, bottom_scale, + first_Y_zone, no_Y_ctrl_zones) +GDECL +fix31 *top_scale, *bottom_scale; +fix15 first_Y_zone; +fix15 no_Y_ctrl_zones; +/* + * Called by sp_setup_pix_table() when squeezing is included + * to determine whether Y scaling is necessary. If it is, + * two scale factors are computed, one for above the baseline, + * and one for below the basline. + * This function returns a boolean value TRUE = Y squeezind is necessary, + * FALSE = no Y squeezing is necessary. + */ +{ +boolean squeeze_top, squeeze_bottom; +boolean out_on_top, out_on_bottom; +fix15 bbox_top, bbox_bottom; +fix15 bbox_height; +fix15 i; + +/* set up some flags and common calculations */ +squeeze_top = (sp_globals.pspecs->flags & SQUEEZE_TOP)? TRUE:FALSE; +squeeze_bottom = (sp_globals.pspecs->flags & SQUEEZE_BOTTOM)? TRUE:FALSE; +bbox_top = sp_globals.bbox_ymax_orus; +bbox_bottom = sp_globals.bbox_ymin_orus; +bbox_height = bbox_top - bbox_bottom; + +if (bbox_top > EM_TOP) + out_on_top = TRUE; +else + out_on_top = FALSE; + +if (bbox_bottom < EM_BOT) + out_on_bottom = TRUE; +else + out_on_bottom = FALSE; + +/* + * don't need Y squeezing if: + * - Y squeezing not enabled + * - bbox doesn't violate on top or bottom + * - top squeezing only is enabled and char isn't out on top + * - bottom squeezing only is enabled and char isn't out on bottom + */ +if ((!squeeze_top && !squeeze_bottom) || + (!out_on_top && !out_on_bottom) || + (squeeze_top && !squeeze_bottom && !out_on_top) || + (squeeze_bottom && !squeeze_top && !out_on_bottom)) + return FALSE; + +if (squeeze_top && (bbox_top > EM_TOP)) + *top_scale = ((fix31)EM_TOP << 16)/(fix31)(bbox_top); +else + *top_scale = 0x10000L; /* 1 in 16.16 fixed point */ + +if (squeeze_bottom && (bbox_bottom < EM_BOT)) + *bottom_scale = ((fix31)-(EM_BOT) << 16)/(fix31)-bbox_bottom; +else + *bottom_scale = 0x10000L; + +if (sp_globals.squeezing_compound) + { + for (i=first_Y_zone; i < (first_Y_zone + no_Y_ctrl_zones + 1); i++) + { + if (sp_plaid.orus[i] >= 0) + sp_plaid.pix[i] = (SQUEEZE_MULT(sp_plaid.pix[i], *top_scale) + +sp_globals.pixrnd) & sp_globals.pixfix; + else + sp_plaid.pix[i] = (SQUEEZE_MULT(sp_plaid.pix[i], *bottom_scale) + +sp_globals.pixrnd) & sp_globals.pixfix; + } + } +return TRUE; +} +#endif + +#if INCL_RULES +FUNCTION static ufix8 FONTFAR *sp_setup_pix_table( + pointer, short_form, no_X_ctrl_zones, no_Y_ctrl_zones) +GDECL +ufix8 FONTFAR *pointer; /* Pointer to first byte in control zone table */ +boolean short_form; /* TRUE if 1 byte from/to specification */ +fix15 no_X_ctrl_zones; /* Number of X control zones */ +fix15 no_Y_ctrl_zones; /* Number of Y control zones */ +/* + * Called by plaid_tcb() to read the control zone table from the + * character data in the font. + * Sets up a table of pixel values for all controlled coordinates. + * Updates the pointer to the byte following the control zone + * data. + */ +{ +fix15 i, j, n; +fix31 ppo; +fix31 xppo0; /* top level pixels per oru */ +fix31 yppo0; /* top level pixels per oru */ +ufix8 edge_org; +ufix8 edge; +ufix8 start_edge; +ufix8 end_edge; +ufix16 constr_org; +fix15 constr_nr; +fix15 zone_pix; +fix31 whole_zone; /* non-transformed value of the first X zone */ +ufix16 tmpufix16; /* in extended mode, macro uses secnd term */ +#if INCL_SQUEEZING +fix31 x_scale; +fix31 y_top_scale, y_bottom_scale; +fix31 x_offset; +boolean squeezed_y; +fix15 setwidth_pix, em_top_pix, em_bot_pix; +#endif + +#if INCL_ISW +boolean imported_width; +fix31 isw_scale; +fix15 isw_setwidth_pix; +#endif + +#if INCL_ISW || INCL_SQUEEZING +boolean squeezed_x; +#endif + +#if INCL_PLAID_OUT /* Plaid data monitoring included? */ +begin_ctrl_zones(no_X_ctrl_zones, no_Y_ctrl_zones); +#endif + + +edge_org = 0; +constr_org = 0; +sp_globals.rnd_xmin = 0; /* initialize the error for chars with no zone */ +n = no_X_ctrl_zones; +ppo = sp_globals.tcb.xppo; +xppo0 = sp_globals.tcb0.xppo; +yppo0 = sp_globals.tcb0.yppo; +#if INCL_SQUEEZING || INCL_ISW +squeezed_x = FALSE; +#endif + +#if INCL_SQUEEZING +squeezed_x = calculate_x_scale (&x_scale, &x_offset, no_X_ctrl_zones); +squeezed_y = calculate_y_scale(&y_top_scale,&y_bottom_scale,(n+1), + no_Y_ctrl_zones); +#if INCL_ISW +if (sp_globals.import_setwidth_act == TRUE) +setwidth_pix = ((fix15)(((fix31)sp_globals.imported_width * xppo0) >> + sp_globals.mpshift) + sp_globals.pixrnd) & sp_globals.pixfix; + +else +#endif +setwidth_pix = ((fix15)(((fix31)sp_globals.setwidth_orus * xppo0) >> + sp_globals.mpshift) + sp_globals.pixrnd) & sp_globals.pixfix; +/* check for overflow */ +if (setwidth_pix < 0) + setwidth_pix = 0x7fff; /* set to maximum */ +em_bot_pix = ((fix15)(((fix31)EM_BOT * yppo0) >> + sp_globals.mpshift) + sp_globals.pixrnd) & sp_globals.pixfix; +em_top_pix = ((fix15)(((fix31)EM_TOP * yppo0) >> + sp_globals.mpshift) + sp_globals.pixrnd) & sp_globals.pixfix; +#endif + +#if INCL_ISW +/* convert to pixels */ +isw_setwidth_pix = ((fix15)(((fix31)sp_globals.imported_width * xppo0) >> + sp_globals.mpshift) + sp_globals.pixrnd) & sp_globals.pixfix; +/* check for overflow */ +if (isw_setwidth_pix < 0) + isw_setwidth_pix = 0x7fff; /* set to maximum */ +if (!squeezed_x && ((imported_width = sp_globals.import_setwidth_act) == TRUE)) + { + isw_scale = compute_isw_scale(); + + /* look for the first non-negative oru value, scale and add the offset */ + /* to the corresponding pixel value - note that the pixel value */ + /* is set in read_oru_table. */ + + /* look at all the X edges */ + for (i=0; i < (no_X_ctrl_zones+1); i++) + if (sp_plaid.orus[i] >= 0) + { + sp_plaid.pix[i] = (SQUEEZE_MULT(sp_plaid.pix[i], isw_scale) + +sp_globals.pixrnd) & sp_globals.pixfix; + break; + } + + } +#endif + +for (i = 0; ; i++) /* For X and Y control zones... */ + { + for (j = 0; j < n; j++) /* For each zone in X or Y... */ + { + if (short_form) /* 1 byte from/to specification? */ + { + edge = NEXT_BYTE(pointer); /* Read packed from/to spec */ + start_edge = edge_org + (edge & 0x0f); /* Extract start edge */ + end_edge = edge_org + (edge >> 4); /* Extract end edge */ + } + else /* 2 byte from/to specification? */ + { + start_edge = edge_org + NEXT_BYTE(pointer); /* Read start edge */ + end_edge = edge_org + NEXT_BYTE(pointer); /* read end edge */ + } + constr_nr = constr_org + + NEXT_BYTES(pointer, tmpufix16); /* Read constraint number */ +#if INCL_SQUEEZING + if (i == 0 && squeezed_x) + calculate_x_pix(start_edge, end_edge, constr_nr, + x_scale, x_offset, ppo, setwidth_pix); + else if (i == 1 && squeezed_y) + calculate_y_pix(start_edge, end_edge,constr_nr, + y_top_scale, y_bottom_scale, ppo, em_top_pix, em_bot_pix); + else + { +#endif +#if INCL_ISW + if (i==0 && imported_width) + calculate_x_pix(start_edge, end_edge, constr_nr, + isw_scale, 0, ppo, isw_setwidth_pix); + else + { +#endif + if (!sp_globals.c_act[constr_nr]) /* Constraint inactive? */ + { + zone_pix = ((fix15)((((fix31)sp_plaid.orus[end_edge] - + (fix31)sp_plaid.orus[start_edge]) * ppo) / + (1<= sp_globals.c_pix[constr_nr]) + goto L1; + } + zone_pix = sp_globals.c_pix[constr_nr]; /* Use zone size from constr table */ + if (start_edge > end_edge) /* sp_plaid.orus[start_edge] > sp_plaid.orus[end_edge]? */ + { + zone_pix = -zone_pix; /* Use negatve zone size */ + } + L1: + /* inter-character spacing fix */ + if ((j == 0) && (i == 0)) /* if this is the 1st X zone, save rounding error */ + { /* get the non-xformed - xformed zone, in right direction */ + whole_zone = (((fix31)sp_plaid.orus[end_edge] - + (fix31)sp_plaid.orus[start_edge]) * + ppo) / (1<flags & SQUEEZE_LEFT) && + (sp_plaid.pix[end_edge] < 0)) + sp_plaid.pix[end_edge] = 0; + if ((sp_globals.pspecs->flags & SQUEEZE_RIGHT) && + (sp_plaid.pix[end_edge] > setwidth_pix)) + sp_plaid.pix[end_edge] = setwidth_pix; + } + if (i == 1) /* in the y direction */ + { /* brute force squeeze */ + if ((sp_globals.pspecs->flags & SQUEEZE_TOP) && + (sp_plaid.pix[end_edge] > em_top_pix)) + sp_plaid.pix[end_edge] = em_top_pix; + if ((sp_globals.pspecs->flags & SQUEEZE_BOTTOM) && + (sp_plaid.pix[end_edge] < em_bot_pix)) + sp_plaid.pix[end_edge] = em_bot_pix; + } +#endif +#if INCL_SQUEEZING + } +#endif +#if INCL_ISW + } +#endif +#if INCL_PLAID_OUT /* Plaid data monitoring included? */ + record_ctrl_zone( + (fix31)sp_plaid.pix[start_edge] << (16 - sp_globals.pixshift), + (fix31)sp_plaid.pix[end_edge] << (16 - sp_globals.pixshift), + (fix15)(constr_nr - constr_org)); +#endif + } + if (i) /* Y pixels done? */ + break; + edge_org = sp_globals.Y_edge_org; /* Prepare to process Y ctrl zones */ + constr_org = sp_globals.Y_constr_org; + n = no_Y_ctrl_zones; + ppo = sp_globals.tcb.yppo; + } + +#if DEBUG +printf("\nX PIX TABLE\n"); +n = no_X_ctrl_zones + 1; +for (i = 0; i < n; i++) + printf("%2d %6.1f\n", i, (real)sp_plaid.pix[i] / (real)sp_globals.onepix); +printf("\nY PIX TABLE\n"); +n = no_Y_ctrl_zones + 1; +for (i = 0; i < n; i++) + { + j = i + no_X_ctrl_zones + 1; + printf("%2d %6.1f\n", i, (real)sp_plaid.pix[j] / (real)sp_globals.onepix); + } +#endif + +return pointer; +} +#endif + + +#if INCL_RULES +FUNCTION static ufix8 FONTFAR *sp_setup_int_table(pointer, no_X_int_zones, no_Y_int_zones) +GDECL +ufix8 FONTFAR *pointer; /* Pointer to first byte in interpolation zone table */ +fix15 no_X_int_zones; /* Number of X interpolation zones */ +fix15 no_Y_int_zones; /* Number of X interpolation zones */ +/* + * Called by plaid_tcb() to read the interpolation zone table from the + * character data in the font. + * Sets up a table of interpolation coefficients with one entry for + * every X or Y interpolation zone. + * Updates the pointer to the byte following the interpolation zone + * data. + */ +{ +fix15 i, j, k, l, n; +ufix8 format; +ufix8 format_copy; +ufix8 tmpufix8; +fix15 start_orus; +ufix8 edge_org; +ufix8 edge; +ufix16 adj_factor; +fix15 adj_orus; +fix15 end_orus; +fix31 zone_orus; +fix15 start_pix; +fix15 end_pix; + + +#if INCL_PLAID_OUT /* Plaid data monitoring included? */ +begin_int_zones(no_X_int_zones, no_Y_int_zones); +#endif + +i = 0; +edge_org = 0; +n = no_X_int_zones; +for (j = 0; ; j++) + { + for (k = 0; k < n; k++) + { + format = NEXT_BYTE(pointer); + if (format & BIT7) /* Short start/end point spec? */ + { + tmpufix8 = NEXT_BYTE(pointer); + edge = edge_org + (tmpufix8 & 0xf); + start_orus = sp_plaid.orus[edge]; + start_pix = sp_plaid.pix[edge]; + edge = edge_org + (tmpufix8 >> 4); + end_orus = sp_plaid.orus[edge]; + end_pix = sp_plaid.pix[edge]; + } + else /* Standard start and end point spec? */ + { + format_copy = format; + for (l = 0; ; l++) /* Loop for start and end point */ + { + switch (format_copy & 0x7) /* Decode start/end point format */ + { + + case 0: /* Index to control edge */ + edge = edge_org + NEXT_BYTE(pointer); + end_orus = sp_plaid.orus[edge]; + end_pix = sp_plaid.pix[edge]; + break; + + case 1: /* 1 byte fractional distance to next edge */ + adj_factor = 0xffff & NEXT_BYTE(pointer) << 8; + goto L1; + + + case 2: /* 2 byte fractional distance to next edge */ + adj_factor = 0xffff & NEXT_WORD(pointer); + L1: edge = edge_org + NEXT_BYTE(pointer); + end_orus = sp_plaid.orus[edge] + + ((((fix31)sp_plaid.orus[edge + 1] - (fix31)sp_plaid.orus[edge]) * + (ufix32)adj_factor + (fix31)32768) >> 16); + end_pix = sp_plaid.pix[edge] + + ((((fix31)sp_plaid.pix[edge + 1] - (fix31)sp_plaid.pix[edge]) * + (ufix32)adj_factor + (fix31)32768) >> 16); + break; + + case 3: /* 1 byte delta orus before first edge */ + adj_orus = -(fix15)NEXT_BYTE(pointer); + goto L2; + + case 4: /* 2 byte delta orus before first edge */ + adj_orus = -NEXT_WORD(pointer); + L2: edge = edge_org; + goto L4; + + case 5: /* 1 byte delta orus after last edge */ + adj_orus = (fix15)NEXT_BYTE(pointer); + goto L3; + + case 6: /* 2 byte delta orus after last edge */ + adj_orus = NEXT_WORD(pointer); + L3: edge = j? sp_globals.Y_edge_org + sp_globals.no_Y_orus - 1: sp_globals.no_X_orus - 1; + L4: end_orus = sp_plaid.orus[edge] + adj_orus; + end_pix = sp_plaid.pix[edge] + + (((fix31)adj_orus * (fix31)(j? sp_globals.tcb.yppo: sp_globals.tcb.xppo) + + sp_globals.mprnd) / (1<>= 3; /* Adj format to decode end point format */ + start_orus = end_orus; /* Save start point oru value */ + start_pix = end_pix; /* Save start point pixel value */ + } + } +#if INCL_PLAID_OUT /* Plaid data monitoring included? */ + record_int_zone( + (fix31)start_pix << (16 - sp_globals.pixshift), + (fix31)end_pix << (16 - sp_globals.pixshift)); +#endif + zone_orus = (fix31)end_orus - (fix31)start_orus; + sp_plaid.mult[i] = ((((fix31)end_pix - (fix31)start_pix) << sp_globals.mpshift) + + (zone_orus / 2)) / zone_orus; + sp_plaid.offset[i] = + (((((fix31)start_pix + (fix31)end_pix) << sp_globals.mpshift) - + ((fix31)sp_plaid.mult[i] * ((fix31)start_orus + (fix31)end_orus))) / 2) + + sp_globals.mprnd; + i++; + } + if (j) /* Finished? */ + break; + edge_org = sp_globals.Y_edge_org; /* Prepare to process Y ctrl zones */ + n = no_Y_int_zones; + } + +#if DEBUG +printf("\nX INT TABLE\n"); +n = no_X_int_zones; +for (i = 0; i < n; i++) + { + printf("%2d %7.4f %7.4f\n", i, + (real)sp_plaid.mult[i] / (real)(1 << sp_globals.multshift), + (real)sp_plaid.offset[i] / (real)(1 << sp_globals.multshift)); + } +printf("\nY INT TABLE\n"); +n = no_Y_int_zones; +for (i = 0; i < n; i++) + { + j = i + no_X_int_zones; + printf("%2d %7.4f %7.4f\n", i, + (real)sp_plaid.mult[j] / (real)(1 << sp_globals.multshift), + (real)sp_plaid.offset[j] / (real)(1 << sp_globals.multshift)); + } +#endif + +return pointer; +} +#endif +#if INCL_ISW +FUNCTION fix31 compute_isw_scale() +GDECL +{ +fix31 isw_scale; + +if (sp_globals.setwidth_orus == 0) + isw_scale = 0x00010000; +else + isw_scale = ((fix31)sp_globals.imported_width << 16)/ + (fix31)sp_globals.setwidth_orus; +return isw_scale; +} +#endif