X-Git-Url: https://git.sesse.net/?a=blobdiff_plain;f=doc%2Fencoders.texi;h=2ba9938da2a26366cec6d857c2a39cbb7bb258b0;hb=d40bb518b50561db60ef71ab0e37eb7f3fb9043b;hp=e86ae69cc595458136c3f3f5cc11cf3341eea81c;hpb=f32d2939555706365ad1d39aadd5ee7ce1d9fa4f;p=ffmpeg

diff --git a/doc/encoders.texi b/doc/encoders.texi
index e86ae69cc59..2ba9938da2a 100644
--- a/doc/encoders.texi
+++ b/doc/encoders.texi
@@ -30,11 +30,7 @@ follows.
 
 Advanced Audio Coding (AAC) encoder.
 
-This encoder is the default AAC encoder, natively implemented into FFmpeg. Its
-quality is on par or better than libfdk_aac at the default bitrate of 128kbps.
-This encoder also implements more options, profiles and samplerates than
-other encoders (with only the AAC-HE profile pending to be implemented) so this
-encoder has become the default and is the recommended choice.
+This encoder is the default AAC encoder, natively implemented into FFmpeg.
 
 @subsection Options
 
@@ -155,10 +151,9 @@ the undocumented RealAudio 3 (a.k.a. dnet).
 The @var{ac3} encoder uses floating-point math, while the @var{ac3_fixed}
 encoder only uses fixed-point integer math. This does not mean that one is
 always faster, just that one or the other may be better suited to a
-particular system. The floating-point encoder will generally produce better
-quality audio for a given bitrate. The @var{ac3_fixed} encoder is not the
-default codec for any of the output formats, so it must be specified explicitly
-using the option @code{-acodec ac3_fixed} in order to use it.
+particular system. The @var{ac3_fixed} encoder is not the default codec for
+any of the output formats, so it must be specified explicitly using the option
+@code{-acodec ac3_fixed} in order to use it.
 
 @subsection AC-3 Metadata
 
@@ -651,10 +646,7 @@ configuration. You need to explicitly configure the build with
 so if you allow the use of GPL, you should configure with
 @code{--enable-gpl --enable-nonfree --enable-libfdk-aac}.
 
-This encoder is considered to produce output on par or worse at 128kbps to the
-@ref{aacenc,,the native FFmpeg AAC encoder} but can often produce better
-sounding audio at identical or lower bitrates and has support for the
-AAC-HE profiles.
+This encoder has support for the AAC-HE profiles.
 
 VBR encoding, enabled through the @option{vbr} or @option{flags
 +qscale} options, is experimental and only works with some
@@ -733,6 +725,14 @@ if set to 0.
 
 Default value is 0.
 
+@item eld_v2
+Enable ELDv2 (LD-MPS extension for ELD stereo signals) for ELDv2 if set to 1,
+disabled if set to 0.
+
+Note that option is available when fdk-aac version (AACENCODER_LIB_VL0.AACENCODER_LIB_VL1.AACENCODER_LIB_VL2) > (4.0.0).
+
+Default value is 0.
+
 @item signaling
 Set SBR/PS signaling style.
 
@@ -952,6 +952,11 @@ The default is 20ms.
 @item packet_loss (@emph{expect-loss})
 Set expected packet loss percentage. The default is 0.
 
+@item fec (@emph{n/a})
+Enable inband forward error correction. @option{packet_loss} must be non-zero
+to take advantage - frequency of FEC 'side-data' is proportional to expected packet loss.
+Default is disabled.
+
 @item application (N.A.)
 Set intended application type. Valid options are listed below:
 
@@ -1179,53 +1184,6 @@ transient response is a higher bitrate.
 
 @end table
 
-@anchor{libwavpack}
-@section libwavpack
-
-A wrapper providing WavPack encoding through libwavpack.
-
-Only lossless mode using 32-bit integer samples is supported currently.
-
-Requires the presence of the libwavpack headers and library during
-configuration. You need to explicitly configure the build with
-@code{--enable-libwavpack}.
-
-Note that a libavcodec-native encoder for the WavPack codec exists so users can
-encode audios with this codec without using this encoder. See @ref{wavpackenc}.
-
-@subsection Options
-
-@command{wavpack} command line utility's corresponding options are listed in
-parentheses, if any.
-
-@table @option
-@item frame_size (@emph{--blocksize})
-Default is 32768.
-
-@item compression_level
-Set speed vs. compression tradeoff. Acceptable arguments are listed below:
-
-@table @samp
-@item 0 (@emph{-f})
-Fast mode.
-
-@item 1
-Normal (default) settings.
-
-@item 2 (@emph{-h})
-High quality.
-
-@item 3 (@emph{-hh})
-Very high quality.
-
-@item 4-8 (@emph{-hh -x}@var{EXTRAPROC})
-Same as @samp{3}, but with extra processing enabled.
-
-@samp{4} is the same as @option{-x2} and @samp{8} is the same as @option{-x6}.
-
-@end table
-@end table
-
 @anchor{mjpegenc}
 @section mjpeg
 
@@ -1252,11 +1210,6 @@ Compute and use optimal huffman tables.
 
 WavPack lossless audio encoder.
 
-This is a libavcodec-native WavPack encoder. There is also an encoder based on
-libwavpack, but there is virtually no reason to use that encoder.
-
-See also @ref{libwavpack}.
-
 @subsection Options
 
 The equivalent options for @command{wavpack} command line utility are listed in
@@ -1277,7 +1230,6 @@ For the complete formula of calculating default, see
 @file{libavcodec/wavpackenc.c}.
 
 @item compression_level (@emph{-f}, @emph{-h}, @emph{-hh}, and @emph{-x})
-This option's syntax is consistent with @ref{libwavpack}'s.
 @end table
 
 @subsubsection Private options
@@ -1316,6 +1268,48 @@ disabled
 A description of some of the currently available video encoders
 follows.
 
+@section a64_multi, a64_multi5
+
+A64 / Commodore 64 multicolor charset encoder. @code{a64_multi5} is extended with 5th color (colram).
+
+@section GIF
+
+GIF image/animation encoder.
+
+@subsection Options
+
+@table @option
+@item gifflags @var{integer}
+Sets the flags used for GIF encoding.
+
+@table @option
+@item offsetting
+Enables picture offsetting.
+
+Default is enabled.
+
+@item transdiff
+Enables transparency detection between frames.
+
+Default is enabled.
+
+@end table
+
+@item gifimage @var{integer}
+Enables encoding one full GIF image per frame, rather than an animated GIF.
+
+Default value is @option{0}.
+
+@item global_palette @var{integer}
+Writes a palette to the global GIF header where feasible.
+
+If disabled, every frame will always have a palette written, even if there
+is a global palette supplied.
+
+Default value is @option{1}.
+
+@end table
+
 @section Hap
 
 Vidvox Hap video encoder.
@@ -1364,10 +1358,101 @@ can be selected with @code{-pred 1}.
 @subsection Options
 
 @table @option
-@item format
+@item format @var{integer}
 Can be set to either @code{j2k} or @code{jp2} (the default) that
 makes it possible to store non-rgb pix_fmts.
 
+@item tile_width @var{integer}
+Sets tile width. Range is 1 to 1073741824. Default is 256.
+
+@item tile_height @var{integer}
+Sets tile height. Range is 1 to 1073741824. Default is 256.
+
+@item pred @var{integer}
+Allows setting the discrete wavelet transform (DWT) type
+@table @option
+@item dwt97int (Lossy)
+@item dwt53 (Lossless)
+@end table
+Default is @code{dwt97int}
+
+@item sop @var{boolean}
+Enable this to add SOP marker at the start of each packet. Disabled by default.
+
+@item eph @var{boolean}
+Enable this to add EPH marker at the end of each packet header. Disabled by default.
+
+@item prog @var{integer}
+Sets the progression order to be used by the encoder.
+Possible values are:
+@table @option
+@item lrcp
+@item rlcp
+@item rpcl
+@item pcrl
+@item cprl
+@end table
+Set to @code{lrcp} by default.
+
+@item layer_rates @var{string}
+By default, when this option is not used, compression is done using the quality metric.
+This option allows for compression using compression ratio. The compression ratio for each
+level could be specified. The compression ratio of a layer @code{l} species the what ratio of
+total file size is contained in the first @code{l} layers.
+
+Example usage:
+
+@example
+ffmpeg -i input.bmp -c:v jpeg2000 -layer_rates "100,10,1" output.j2k
+@end example
+
+This would compress the image to contain 3 layers, where the data contained in the
+first layer would be compressed by 1000 times, compressed by 100 in the first two layers,
+and shall contain all data while using all 3 layers.
+
+@end table
+
+@section librav1e
+
+rav1e AV1 encoder wrapper.
+
+Requires the presence of the rav1e headers and library during configuration.
+You need to explicitly configure the build with @code{--enable-librav1e}.
+
+@subsection Options
+
+@table @option
+@item qmax
+Sets the maximum quantizer to use when using bitrate mode.
+
+@item qmin
+Sets the minimum quantizer to use when using bitrate mode.
+
+@item qp
+Uses quantizer mode to encode at the given quantizer (0-255).
+
+@item speed
+Selects the speed preset (0-10) to encode with.
+
+@item tiles
+Selects how many tiles to encode with.
+
+@item tile-rows
+Selects how many rows of tiles to encode with.
+
+@item tile-columns
+Selects how many columns of tiles to encode with.
+
+@item rav1e-params
+Set rav1e options using a list of @var{key}=@var{value} pairs separated
+by ":". See @command{rav1e --help} for a list of options.
+
+For example to specify librav1e encoding options with @option{-rav1e-params}:
+
+@example
+ffmpeg -i input -c:v librav1e -b:v 500K -rav1e-params speed=5:low_latency=true output.mp4
+@end example
+
 @end table
 
 @section libaom-av1
@@ -1434,6 +1519,38 @@ value is 1, which will be slow and high quality.
 Enable use of alternate reference frames.  Defaults to the internal
 default of the library.
 
+@item arnr-max-frames (@emph{frames})
+Set altref noise reduction max frame count. Default is -1.
+
+@item arnr-strength (@emph{strength})
+Set altref noise reduction filter strength. Range is -1 to 6. Default is -1.
+
+@item aq-mode (@emph{aq-mode})
+Set adaptive quantization mode. Possible values:
+
+@table @samp
+@item none (@emph{0})
+Disabled.
+
+@item variance (@emph{1})
+Variance-based.
+
+@item complexity (@emph{2})
+Complexity-based.
+
+@item cyclic (@emph{3})
+Cyclic refresh.
+@end table
+
+@item tune (@emph{tune})
+Set the distortion metric the encoder is tuned with. Default is @code{psnr}.
+
+@table @samp
+@item psnr (@emph{0})
+
+@item ssim (@emph{1})
+@end table
+
 @item lag-in-frames
 Set the maximum number of frames which the encoder may keep in flight
 at any one time for lookahead purposes.  Defaults to the internal
@@ -1466,6 +1583,35 @@ buffer falls below this percentage, frames will be dropped until it
 has refilled above the threshold.  Defaults to zero (no frames are
 dropped).
 
+@item denoise-noise-level (@emph{level})
+Amount of noise to be removed for grain synthesis. Grain synthesis is disabled if
+this option is not set or set to 0.
+
+@item denoise-block-size (@emph{pixels})
+Block size used for denoising for grain synthesis. If not set, AV1 codec
+uses the default value of 32.
+
+@item undershoot-pct (@emph{pct})
+Set datarate undershoot (min) percentage of the target bitrate. Range is -1 to 100.
+Default is -1.
+
+@item overshoot-pct (@emph{pct})
+Set datarate overshoot (max) percentage of the target bitrate. Range is -1 to 1000.
+Default is -1.
+
+@item minsection-pct (@emph{pct})
+Minimum percentage variation of the GOP bitrate from the target bitrate. If minsection-pct
+is not set, the libaomenc wrapper computes it as follows: @code{(minrate * 100 / bitrate)}.
+Range is -1 to 100. Default is -1 (unset).
+
+@item maxsection-pct (@emph{pct})
+Maximum percentage variation of the GOP bitrate from the target bitrate. If maxsection-pct
+is not set, the libaomenc wrapper computes it as follows: @code{(maxrate * 100 / bitrate)}.
+Range is -1 to 5000. Default is -1 (unset).
+
+@item frame-parallel (@emph{boolean})
+Enable frame parallel decodability features. Default is true.
+
 @item tiles
 Set the number of tiles to encode the input video with, as columns x
 rows.  Larger numbers allow greater parallelism in both encoding and
@@ -1480,6 +1626,179 @@ Provided for compatibility with libvpx/VP9.
 @item row-mt (Requires libaom >= 1.0.0-759-g90a15f4f2)
 Enable row based multi-threading. Disabled by default.
 
+@item enable-cdef (@emph{boolean})
+Enable Constrained Directional Enhancement Filter. The libaom-av1
+encoder enables CDEF by default.
+
+@item enable-restoration (@emph{boolean})
+Enable Loop Restoration Filter. Default is true for libaom-av1.
+
+@item enable-global-motion (@emph{boolean})
+Enable the use of global motion for block prediction. Default is true.
+
+@item enable-intrabc (@emph{boolean})
+Enable block copy mode for intra block prediction. This mode is
+useful for screen content. Default is true.
+
+@item enable-rect-partitions (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable rectangular partitions. Default is true.
+
+@item enable-1to4-partitions (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable 1:4/4:1 partitions. Default is true.
+
+@item enable-ab-partitions (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable AB shape partitions. Default is true.
+
+@item enable-angle-delta (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable angle delta intra prediction. Default is true.
+
+@item enable-cfl-intra (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable chroma predicted from luma intra prediction. Default is true.
+
+@item enable-filter-intra (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable filter intra predictor. Default is true.
+
+@item enable-intra-edge-filter (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable intra edge filter. Default is true.
+
+@item enable-smooth-intra (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable smooth intra prediction mode. Default is true.
+
+@item enable-paeth-intra (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable paeth predictor in intra prediction. Default is true.
+
+@item enable-palette (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable palette prediction mode. Default is true.
+
+@item enable-flip-idtx (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable extended transform type, including FLIPADST_DCT, DCT_FLIPADST,
+FLIPADST_FLIPADST, ADST_FLIPADST, FLIPADST_ADST, IDTX, V_DCT, H_DCT,
+V_ADST, H_ADST, V_FLIPADST, H_FLIPADST. Default is true.
+
+@item enable-tx64 (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable 64-pt transform. Default is true.
+
+@item reduced-tx-type-set (@emph{boolean}) (Requires libaom >= v2.0.0)
+Use reduced set of transform types. Default is false.
+
+@item use-intra-dct-only (@emph{boolean}) (Requires libaom >= v2.0.0)
+Use DCT only for INTRA modes. Default is false.
+
+@item use-inter-dct-only (@emph{boolean}) (Requires libaom >= v2.0.0)
+Use DCT only for INTER modes. Default is false.
+
+@item use-intra-default-tx-only (@emph{boolean}) (Requires libaom >= v2.0.0)
+Use Default-transform only for INTRA modes. Default is false.
+
+@item enable-ref-frame-mvs (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable temporal mv prediction. Default is true.
+
+@item enable-reduced-reference-set (@emph{boolean}) (Requires libaom >= v2.0.0)
+Use reduced set of single and compound references. Default is false.
+
+@item enable-obmc (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable obmc. Default is true.
+
+@item enable-dual-filter (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable dual filter. Default is true.
+
+@item enable-diff-wtd-comp (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable difference-weighted compound. Default is true.
+
+@item enable-dist-wtd-comp (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable distance-weighted compound. Default is true.
+
+@item enable-onesided-comp (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable one sided compound. Default is true.
+
+@item enable-interinter-wedge (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable interinter wedge compound. Default is true.
+
+@item enable-interintra-wedge (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable interintra wedge compound. Default is true.
+
+@item enable-masked-comp (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable masked compound. Default is true.
+
+@item enable-interintra-comp (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable interintra compound. Default is true.
+
+@item enable-smooth-interintra (@emph{boolean}) (Requires libaom >= v2.0.0)
+Enable smooth interintra mode. Default is true.
+
+@item aom-params
+Set libaom options using a list of @var{key}=@var{value} pairs separated
+by ":". For a list of supported options, see @command{aomenc --help} under the
+section "AV1 Specific Options".
+
+For example to specify libaom encoding options with @option{-aom-params}:
+
+@example
+ffmpeg -i input -c:v libaom-av1 -b:v 500K -aom-params tune=psnr:enable-tpl-model=1 output.mp4
+@end example
+
+@end table
+
+@section libsvtav1
+
+SVT-AV1 encoder wrapper.
+
+Requires the presence of the SVT-AV1 headers and library during configuration.
+You need to explicitly configure the build with @code{--enable-libsvtav1}.
+
+@subsection Options
+
+@table @option
+@item profile
+Set the encoding profile.
+
+@item level
+Set the operating point level.
+
+@item tier
+Set the operating point tier.
+
+@item rc
+Set the rate control mode to use.
+
+Possible modes:
+@table @option
+@item cqp
+Constant quantizer: use fixed values of qindex (dependent on the frame type)
+throughout the stream.  This mode is the default.
+
+@item vbr
+Variable bitrate: use a target bitrate for the whole stream.
+
+@item cvbr
+Constrained variable bitrate: use a target bitrate for each GOP.
+@end table
+
+@item qmax
+Set the maximum quantizer to use when using a bitrate mode.
+
+@item qmin
+Set the minimum quantizer to use when using a bitrate mode.
+
+@item qp
+Set the quantizer used in cqp rate control mode (0-63).
+
+@item sc_detection
+Enable scene change detection.
+
+@item la_depth
+Set number of frames to look ahead (0-120).
+
+@item preset
+Set the quality-speed tradeoff, in the range 0 to 8.  Higher values are
+faster but lower quality.  Defaults to 8 (highest speed).
+
+@item tile_rows
+Set log2 of the number of rows of tiles to use (0-6).
+
+@item tile_columns
+Set log2 of the number of columns of tiles to use (0-4).
+
 @end table
 
 @section libkvazaar
@@ -1754,7 +2073,7 @@ means unlimited.
 @item auto-alt-ref
 Enable use of alternate reference frames (2-pass only).
 Values greater than 1 enable multi-layer alternate reference frames (VP9 only).
-@item arnr-max-frames
+@item arnr-maxframes
 Set altref noise reduction max frame count.
 @item arnr-type
 Set altref noise reduction filter type: backward, forward, centered.
@@ -1771,16 +2090,14 @@ Enable error resiliency features.
 Increase sharpness at the expense of lower PSNR.
 The valid range is [0, 7].
 
-@item VP8-specific options
-@table @option
 @item ts-parameters
 Sets the temporal scalability configuration using a :-separated list of
 key=value pairs. For example, to specify temporal scalability parameters
 with @code{ffmpeg}:
 @example
 ffmpeg -i INPUT -c:v libvpx -ts-parameters ts_number_layers=3:\
-ts_target_bitrate=250000,500000,1000000:ts_rate_decimator=4,2,1:\
-ts_periodicity=4:ts_layer_id=0,2,1,2 OUTPUT
+ts_target_bitrate=250,500,1000:ts_rate_decimator=4,2,1:\
+ts_periodicity=4:ts_layer_id=0,2,1,2:ts_layering_mode=3 OUTPUT
 @end example
 Below is a brief explanation of each of the parameters, please
 refer to @code{struct vpx_codec_enc_cfg} in @code{vpx/vpx_encoder.h} for more
@@ -1789,13 +2106,38 @@ details.
 @item ts_number_layers
 Number of temporal coding layers.
 @item ts_target_bitrate
-Target bitrate for each temporal layer.
+Target bitrate for each temporal layer (in kbps).
+(bitrate should be inclusive of the lower temporal layer).
 @item ts_rate_decimator
 Frame rate decimation factor for each temporal layer.
 @item ts_periodicity
 Length of the sequence defining frame temporal layer membership.
 @item ts_layer_id
 Template defining the membership of frames to temporal layers.
+@item ts_layering_mode
+(optional) Selecting the temporal structure from a set of pre-defined temporal layering modes.
+Currently supports the following options.
+@table @option
+@item 0
+No temporal layering flags are provided internally,
+relies on flags being passed in using @code{metadata} field in @code{AVFrame}
+with following keys.
+@table @option
+@item vp8-flags
+Sets the flags passed into the encoder to indicate the referencing scheme for
+the current frame.
+Refer to function @code{vpx_codec_encode} in @code{vpx/vpx_encoder.h} for more
+details.
+@item temporal_id
+Explicitly sets the temporal id of the current frame to encode.
+@end table
+@item 2
+Two temporal layers. 0-1...
+@item 3
+Three temporal layers. 0-2-1-2...; with single reference frame.
+@item 4
+Same as option "3", except there is a dependency between
+the two temporal layer 2 frames within the temporal period.
 @end table
 @end table
 
@@ -1839,6 +2181,38 @@ midpoint is passed in rather than calculated for a specific clip or chunk.
 The valid range is [0, 10000]. 0 (default) uses standard VBR.
 @item enable-tpl @var{boolean}
 Enable temporal dependency model.
+@item ref-frame-config
+Using per-frame metadata, set members of the structure @code{vpx_svc_ref_frame_config_t} in @code{vpx/vp8cx.h} to fine-control referencing schemes and frame buffer management.
+@*Use a :-separated list of key=value pairs.
+For example,
+@example
+av_dict_set(&av_frame->metadata, "ref-frame-config", \
+"rfc_update_buffer_slot=7:rfc_lst_fb_idx=0:rfc_gld_fb_idx=1:rfc_alt_fb_idx=2:rfc_reference_last=0:rfc_reference_golden=0:rfc_reference_alt_ref=0");
+@end example
+@table @option
+@item rfc_update_buffer_slot
+Indicates the buffer slot number to update
+@item rfc_update_last
+Indicates whether to update the LAST frame
+@item rfc_update_golden
+Indicates whether to update GOLDEN frame
+@item rfc_update_alt_ref
+Indicates whether to update ALT_REF frame
+@item rfc_lst_fb_idx
+LAST frame buffer index
+@item rfc_gld_fb_idx
+GOLDEN frame buffer index
+@item rfc_alt_fb_idx
+ALT_REF frame buffer index
+@item rfc_reference_last
+Indicates whether to reference LAST frame
+@item rfc_reference_golden
+Indicates whether to reference GOLDEN frame
+@item rfc_reference_alt_ref
+Indicates whether to reference ALT_REF frame
+@item rfc_reference_duration
+Indicates frame duration
+@end table
 @end table
 
 @end table
@@ -1935,9 +2309,7 @@ pixel formats as input instead of YUV.
 @subsection Supported Pixel Formats
 
 x264 supports 8- to 10-bit color spaces. The exact bit depth is controlled at
-x264's configure time. FFmpeg only supports one bit depth in one particular
-build. In other words, it is not possible to build one FFmpeg with multiple
-versions of x264 with different bit depths.
+x264's configure time.
 
 @subsection Options
 
@@ -2300,6 +2672,20 @@ during configuration. You need to explicitly configure the build with
 @subsection Options
 
 @table @option
+@item b
+Sets target video bitrate.
+
+@item bf
+
+@item g
+Set the GOP size.
+
+@item keyint_min
+Minimum GOP size.
+
+@item refs
+Number of reference frames each P-frame can use. The range is from @var{1-16}.
+
 @item preset
 Set the x265 preset.
 
@@ -2312,6 +2698,28 @@ Set profile restrictions.
 @item crf
 Set the quality for constant quality mode.
 
+@item qp
+Set constant quantization rate control method parameter.
+
+@item qmin
+Minimum quantizer scale.
+
+@item qmax
+Maximum quantizer scale.
+
+@item qdiff
+Maximum difference between quantizer scales.
+
+@item qblur
+Quantizer curve blur
+
+@item qcomp
+Quantizer curve compression factor
+
+@item i_qfactor
+
+@item b_qfactor
+
 @item forced-idr
 Normally, when forcing a I-frame type, the encoder can select any type
 of I-frame. This option forces it to choose an IDR-frame.
@@ -2547,6 +2955,14 @@ fastest.
 
 @end table
 
+@section MediaFoundation
+
+This provides wrappers to encoders (both audio and video) in the
+MediaFoundation framework. It can access both SW and HW encoders.
+Video encoders can take input in either of nv12 or yuv420p form
+(some encoders support both, some support only either - in practice,
+nv12 is the safer choice, especially among HW encoders).
+
 @section mpeg2
 
 MPEG-2 video encoder.
@@ -2554,6 +2970,30 @@ MPEG-2 video encoder.
 @subsection Options
 
 @table @option
+@item profile
+Select the mpeg2 profile to encode:
+
+@table @samp
+@item 422
+@item high
+@item ss
+Spatially Scalable
+@item snr
+SNR Scalable
+@item main
+@item simple
+@end table
+
+@item level
+Select the mpeg2 level to encode:
+
+@table @samp
+@item high
+@item high1440
+@item main
+@item low
+@end table
+
 @item seq_disp_ext @var{integer}
 Specifies if the encoder should write a sequence_display_extension to the
 output.
@@ -2574,6 +3014,9 @@ Specifies the video_format written into the sequence display extension
 indicating the source of the video pictures. The default is @samp{unspecified},
 can be @samp{component}, @samp{pal}, @samp{ntsc}, @samp{secam} or @samp{mac}.
 For maximum compatibility, use @samp{component}.
+@item a53cc @var{boolean}
+Import closed captions (which must be ATSC compatible format) into output.
+Default is 1 (on).
 @end table
 
 @section png
@@ -2659,7 +3102,7 @@ recommended value) and do not set a size constraint.
 
 @section QSV encoders
 
-The family of Intel QuickSync Video encoders (MPEG-2, H.264 and HEVC)
+The family of Intel QuickSync Video encoders (MPEG-2, H.264, HEVC, JPEG/MJPEG and VP9)
 
 The ratecontrol method is selected as follows:
 
@@ -2824,6 +3267,30 @@ Set the B-frame reference depth.  When set to one (the default), all B-frames
 will refer only to P- or I-frames.  When set to greater values multiple layers
 of B-frames will be present, frames in each layer only referring to frames in
 higher layers.
+
+@item rc_mode
+Set the rate control mode to use.  A given driver may only support a subset of
+modes.
+
+Possible modes:
+@table @option
+@item auto
+Choose the mode automatically based on driver support and the other options.
+This is the default.
+@item CQP
+Constant-quality.
+@item CBR
+Constant-bitrate.
+@item VBR
+Variable-bitrate.
+@item ICQ
+Intelligent constant-quality.
+@item QVBR
+Quality-defined variable-bitrate.
+@item AVBR
+Average variable bitrate.
+@end table
+
 @end table
 
 Each encoder also has its own specific options:
@@ -2888,6 +3355,11 @@ Include HDR metadata if the input frames have it
 messages).
 @end table
 
+@item tiles
+Set the number of tiles to encode the input video with, as columns x rows.
+Larger numbers allow greater parallelism in both encoding and decoding, but
+may decrease coding efficiency.
+
 @end table
 
 @item mjpeg_vaapi
@@ -3018,6 +3490,14 @@ and they can also be used in Matroska files.
 @subsection Options
 
 @table @option
+@item palette
+Specify the global palette used by the bitmaps.
+
+The format for this option is a string containing 16 24-bits hexadecimal
+numbers (without 0x prefix) separated by commas, for example @code{0d00ee,
+ee450d, 101010, eaeaea, 0ce60b, ec14ed, ebff0b, 0d617a, 7b7b7b, d1d1d1,
+7b2a0e, 0d950c, 0f007b, cf0dec, cfa80c, 7c127b}.
+
 @item even_rows_fix
 When set to 1, enable a work-around that makes the number of pixel rows
 even in all subtitles.  This fixes a problem with some players that