X-Git-Url: https://git.sesse.net/?a=blobdiff_plain;f=docs%2Fservices.txt;h=89ef07447fc3c6d185baef7cbb9e2cfdccda4006;hb=bc5432678809b945cbb36bec73d75c1f162e932c;hp=791c5aaba8b6a56392fa366eb62c4e801d19307d;hpb=26748780198a5760af65208e8c2a87581ef362cd;p=mlt diff --git a/docs/services.txt b/docs/services.txt index 791c5aab..89ef0744 100644 --- a/docs/services.txt +++ b/docs/services.txt @@ -1,330 +1,1409 @@ +Service Documentation + +Authors: Charles Yates + Dan Dennedy +Last Revision: 2009-05-08 + + +SERVICES +-------- + + Services marked as "(Proprietary)" are not distributed with the LGPL + version of mlt. + Producers --------- - ffmpeg + avformat - Description + Description - Test case pipe based producer for video and audio. + ffmpeg libavformat based producer for video and audio. - Constructor Argument + Constructor Argument - 'file' - produce a/v from file - v4l - produce a/v from video4linux and dsp device + 'file' - a filename specification or URL in the form: + [{protocol}|{format}]:{resource}[?{format-parameter}[&{format-parameter}...]] + For example, video4linux:/dev/video1?width:320&height:240 + Note: on the bash command line, & must be escaped as '\&'. + Also, note the use of ':' instead of '=' for parameters. + Use 'ffmpeg -formats' to see a list of supported protocols + and formats. + + Details + + Format parameters only appear to be useful with 'video4linux' or + 'audio_device' formats. For 'video4linux' the parameters are + width, height, frame_rate, frame_rate_base, and standard (ntsc|pal). + For 'audio_device' the parameters are channels and sample_rate. - Initialisation Properties + Initialisation Properties - string video_type - "file" or "v4l" - string video_file - file or v4l device - string video_size - WxH of video to produce (default: "") - int video_loop - loop video until audio exhausted (default: 0) - string audio_type - "file" or "dsp" - string audio_file - file or dsp device - int audio_rate - audio frequency (default: 48000) - int audio_channels - audio channels (default: 2) - int audio_track - audio track to use (default: 0) - int audio_loop - loop audio until video exhausted (default: 0) - timecode in - in point - timecode out - out point - double fps - output frames per second (default: 25) - double aspect_ratio - aspect ratio of video + int video_index - index of video stream to use (-1 is off) + int audio_index - index of audio stream to use (-1 is off) + int in - in point + int out - out point - Read Only Properties + Read Only Properties - string resource - file or "v4l" - int end_of_clip - holds 1 when input is exhausted + string resource - file location + double source_fps - the framerate of the resource + double aspect_ratio - sample aspect ratio of the resource + - this is determined on every frame read - Dependencies + Dependencies - ffmpeg executable. + ffmpeg - Known Bugs + Known Bugs - in point setting is broken. + Audio sync discrepancy with some content. + Not all libavformat supported formats are seekable. + Fails to play beyond first frame of video of sources with PTS not + starting at 0 (video4linux). - Implementation does not allow fast random access. + loader - libdv + Description - Description + A friendly giant that likes to rhyme and throw rocks - libdv based decoder for video and audio. + Constructor Argument - Constructor Argument + 'file' - a filename specification: + [{mlt-service}:]{resource} | {mlt-service} + - can also be the name of a producer service that can + accept the resource specified post construction. - 'file' - produce a/v from file + Initialisation Properties - Initialisation Properties + int in - in point + int out - out point + + all producer initialising properties - timecode in - in point - timecode out - out point + Read Only Properties - Read Only Properties + string resource - file location + + all producer read only properties - string resource - file location - double fps - output frames per second - double aspect_ratio - aspect ratio of video] - timecode length - duration of resource (in seconds) + Details - Dependencies + This producer has two roles: - libdv. + 1. it handles the mappings of all file names to the other + producers; + 2. it attaches normalising filters (rescale, resize and resample) + to the producers (when necessary). - Known Bugs + This producer simplifies many aspects of use. Essentially, it + ensures that a consumer will receive images and audio precisely as + they request them. - None. + Dependencies - mcdv + all. - Description + Known Bugs - Mainconcept based dv decoder for video and audio. + None. + + + colour + + Description + + A simple colour generator. + + Constructor Argument + + colour - A colour value is a hexadecimal representation of RGB plus + alpha channel as 0xrrggbbaa. + - Also colours can be the words: white, black, red, green, + or blue. + - The default colour is black. + + Initialisation Properties + + none + + Read Only Properties + + none + + Dependencies + + none + + Known Bugs + + none + + + libdv - Constructor Argument + Description - 'file' - produce a/v from file + libdv based decoder for video and audio. - Initialisation Properties + Constructor Argument - timecode in - in point - timecode out - out point + 'file' - produce a/v from file - Read Only Properties + Initialisation Properties - string resource - file location - double fps - output frames per second - double aspect_ratio - aspect ratio of video - timecode length - duration of resource (in seconds) + int in - in point + int out - out point - Dependencies + Read Only Properties - mainconcept dv sdk and libdv. + string resource - file location + double fps - output frames per second + int length - duration of resource (in frames) + + Mutable Properties + + string quality - one of "best," "fast" or anything else chooses + medium. - Known Bugs + Dependencies - Can be problematic with source NTSC DV files? really? yes - try - playing pond.dv... + libdv. - mcmpeg + Known Bugs - Description + DVCPRO is incorrectly identified as 16:9 aspect ratio. You must use + libdv from CVS or a post 0.101 release. - Mainconcept based mpeg decoder for video and audio. + noise - Constructor Argument + Description - 'file' - produce a/v from file + White noise producer - Initialisation Properties + Constructor Argument - timecode in - in point - timecode out - out point + none - Read Only Properties + Initialisation Properties - string resource - file location - double fps - output frames per second - double aspect_ratio - aspect ratio of video + int in - in point + int out - out point - Dependencies + Read Only Properties - mainconcept mpeg sdk. + string resource - file location + double fps - output frames per second + double aspect_ratio - sample aspect ratio of video + int length - duration of resource (in frames) + + Dependencies - Known Bugs + none - None. + Known Bugs + + none pango + + Description + + A title generator that uses the Pango international text layout + and Freetype2 font renderer. + + Constructor Argument + + string file - a text file containing Pango markup, see: + http://developer.gnome.org/doc/API/2.0/pango/PangoMarkupFormat.html + - requires xml-like encoding special chars from: + <, >, & -to- <, >, & + + Details + + Supplying a filename with extension ".txt" causes the loader + producer to load with pango. If the filename begins with "+" the + pango producer interprets the filename as pango text. This is a + shortcut to embed titles in melt commands. For MLT XML, it is + recommended that you embed the title text in the property value. + + Pango has builtin scaling. It will rescale the originally rendered + title to whatever the consumer requests. Therefore, it will lose + its aspect ratio if so requested, and it is up to the consumer to + request a proper width and height that maintains the image aspect. + + Initialisation Properties + + int in - in point + int out - out point + + Mutable Properties + + string markup - a string containing Pango markup see: + http://developer.gnome.org/doc/API/2.0/pango/PangoMarkupFormat.html + - requires xml-like encoding special chars from: + <, >, & -to- <, >, & + string fgcolour - an RGBA colour specification of the text + (i.e. 0xrrggbbaa) + string bgcolour - an RGBA colour of the background rectangle + string align - paragraph alignment: left, centre, right + - also, numbers 0, 1 and 2 can be used respectively. + int pad - the number of pixels to pad the background rectangle + beyond edges of text. default 0. + string markup - see constructor argument + string text - non-markup string in UTF-8 encoding (can contain + markup chars un-encoded) + string font - the default typeface to use when not using markup. + default "Sans 48". FreeType2 renders at 72 dpi. + string encoding - the text encoding type of the input if not UTF-8. + - see 'iconv --list' for a list of possible inputs. + int weight - the weight of the font (default is 400) + + Read Only Properties + + string resource - the text/markup file or "pango" if no file. + int real_width - the original, unscaled width of the rendered title. + int real_height - the original, unscaled height of the title. + int width - the last requested scaled image width. + int height - the last requested scaled image height. + + Dependencies + + libpango-1.0, libpangoft2-1.0, libfreetype, libgdk_pixbuf-2.0, + libglib-2.0, libgobject-2.0, libgmodule-2.0, libfontconfig. + + Known Bugs + + The foreground and background Pango markup span attributes are not + supported. + Word wrapping is not supported. + + pixbuf + + Description + + A still graphics to video generator using gdk-pixbuf + + Constructor Argument + + 'file' - The name of a graphics file loadable by + a gdk-pixbuf loader. see /usr/lib/gdk-pixbuf/loaders + definitely png, jpeg, tiff, pnm, and xpm + - If "%" in filename, the filename is used with sprintf + generate a filename from a counter for multi-file/flipbook + animation. The file sequence ends when numeric + discontinuity >100. + - If filename contains "/.all.", suffix with an extension to + load all pictures with matching extension from a directory. + - If filename contains the string " ( and '&' and '"' ?) + none + + Read Only Properties - Initialisation Properties + string resource - the command + + Dependencies - timecode in - in point - timecode out - out point - int video_standard - enum mlt_video_standard from mlt_frame.h - PAL = 0, NTSC = 1 - this determines proper pixel aspect ratio + none + + Known Bugs - int fgcolor - an rgba color specification of the text (i.e. 0xrrggbbaa) - int bgcolor - an rgba color of the background rectangle - int align - paragraph alignment: 0 = left, 1 = center, 2 = right - int pad - the number of pixels to pad the background rectangle beyond edges of text - default 0 - string markup - see constructor argument - string text - non-markup text (can contain markup chars un-encoded) - string font - the default typeface to use when not using markup - default "Sans 48" - int x - the horizontal position of the title on the frame - default 0 - int y - the vertical position of the title on the frame - default 0 - double mix - the overall opacity control of the generated title - default 1.0 + Since it uses pipes, it is not compatible with bluefish. - Read Only Properties + xml - string resource - "pango" + Description - Dependencies + Construct a service network from an XML description. + See docs/mlt-xml.txt. - libpango-1.0, libpangoft2-1.0, libfreetype, libgdk_pixbuf-2.0, libglib-2.0, - libgobject-2.0, libgmodule-2.0, libfontconfig + Constructor Argument - Known Bugs + URL - an XML text file containing MLT XML + - Since MLT XML files can be parameterised, the URL syntax is: + {file-name}[?{param-name}{'='|':'}{param-value}[&{param-name}{'='|':'}{param-value}...]] + A colon is allowed instead of an equal sign to pacify melt, + who tokenises anything with an equal sign as a property + setting. Also, when running melt from the shell, beware of + the '?' and shell filename expansion. You can surround the URL + with single quotations to prevent expansion. Finally, the loader + will fail to match the filename when you use parameters, so + preface the url with 'xml:' to force the loader to load with + the xml service. + + Read Only Properties - no frame-alignment functionality + string resource - file location - pixbuf + Dependencies - Description + libxml2 - A graphics overlay generator using gdk-pixbuf + Known Bugs - Constructor Argument + Non-referenced producers and playlists are not destroyed until the + network is destroyed. + A referenced producer or playlist must appear before the reference. + A filter that occurs before a producer has been defined causes a + segfault. - 'file' - The name of a graphics file loadable by - a gdk-pixbuf loader. see /usr/lib/gdk-pixbuf/loaders - definitely png, jpeg, tiff, pnm, and xpm - - If "%" in filename, the filename is used with sprintf - generate a filename from a counter for multi-file/flipbook animation. - The file sequence ends when numeric discontinuity >100. - - If filename contains "/.all.", suffix with an extension to load - all pictures with matching extension from a directory + vorbis - Initialisation Properties + Description - timecode in - in point - timecode out - out point - int video_standard - enum mlt_video_standard from mlt_frame.h - PAL = 0, NTSC = 1 - this determines proper pixel aspect ratio - double ttl - how long (seconds) to repeat each picture in file sequences + OGG Vorbis file reader. - Read Only Properties + Constructor Argument - string resource - file location + 'file' - file to use (only .ogg supported at the moment) - Dependencies + Initialisation Properties - libgdk_pixbuf-2.0, libglib-2.0, libgobject-2.0, libgmodule-2.0 + int in - in point + int out - out point - Known Bugs + Read Only Properties - none + double fps - this is fixed at 25 for PAL currently - ppm - Description - Constructor Argument - Initialisation Properties - Read Only Properties - Dependencies - Known Bugs + Dependencies + libvorbisfile + + Known Bugs + + Fixed frame size (PAL audio chunks). + Doesn't cover ogg files with multiple, differing sections. Filters ------- - deinterlace + brightness - Description - Constructor Argument - Initialisation Properties - Read Only Properties - Dependencies - Known Bugs - - ffmpeg_dub + Description + + Shift the luma component using a constant value. + + Constructor Argument + + start - the constant floating point numeric value to apply. + - the default is 0. + + Initialisation Properties + + int in - in point + int out - out point + double start - see Constructor Argument above. + double end - the ending adjustment value. the filter interpolates + between the start and end adjustments over the + duration of the effect. + + Read Only Properties + + none + + Dependencies + + none + + Known Bugs + + Does not go completely to black or white. + + + channelcopy - Description - Constructor Argument - Initialisation Properties - Read Only Properties - Dependencies - Known Bugs + Description + + Copy audio from one channel to another channel. + + Constructor Argument + + to - the 0-indexed channel to copy into, default is 1. + + Mutable Properties + + int to - see above + int from - the channel from which to copy, default is 0. + + Dependencies + + none + + Known Bugs + + none + + + deinterlace + + Description + + Deinterlace a frame consisting of two fields using bob, weave, + greedy, one-field, and linear blend methods. This code is + appropriated from the Xine XV video output plugin. + + Constructor Argument + + method - a string containing the deinterlace method: bob, weave, + greedy, onefield, or linearblend. The default is + linearblend. + + Initialisation Properties + + int in - in point + int out - out point + + Read Only Properties + + none + + Mutable Properties + + string method + + Details + + If the frame properties "progressive" or "consumer_progressive" + are non-zero, then the filter is not applied. Also, if applied, + this sets the frame property "progressive" to 1. + + Dependencies + + none + + Known Bugs + + Not a bug, but it only provides fair quality. + + gamma - Description - Constructor Argument - Initialisation Properties - Read Only Properties - Dependencies - Known Bugs + Description + + Adjust image luma using a non-linear power-law curve + + Constructor Argument + + gamma - a floating point value. The default is 1.0, or none. + + Initialisation Properties + + int in - in point + int out - out point + + Mutable Properties + + double gamma - the exponential factor of the power-law curve + + Dependencies + + none + + Known Bugs + + none + greyscale - Description - Constructor Argument - Initialisation Properties - Read Only Properties - Dependencies - Known Bugs + Description + + Convert colour image to greyscale + + Constructor Argument + + none + + Initialisation Properties + + int in - in point + int out - out point + + Read Only Properties + + none + + Dependencies + + none + + Known Bugs + + none + + gtkrescale + + Description + + Scale the producer video frame size to match the consumer. + This filter is designed for use as a normaliser for the loader producer. + + Constructor Argument + + interpolation - the rescaling method, one of: + nearest (lowest quality, fastest), + tiles, + bilinear (default; good quality, moderate speed), + hyper (best quality, slowest). + + Initialisation Properties + + int in - in point + int out - out point + + Mutable Properties + + string interpolation - see constructor argument above + + If a property "consumer_aspect_ratio" exists on the frame, then + rescaler normalises the producer's aspect ratio and maximises the + size of the frame, but may not produce the consumer's requested + dimension. Therefore, this option works best in conjunction with the + resize filter. This behavior can be disabled by another service by + either removing the property, setting it to zero, or setting + frame property "distort" to 1. + + Dependencies + + libgdk_pixbuf-2.0, libglib-2.0, libgobject-2.0, libgmodule-2.0 + + Known Bugs + + none + + jackrack + + Description + + Creates Jack ports and runs a JackRack project to process audio + through a stack of LADSPA filters. + + Constructor Argument + + src - a JackRack file + + Details + + If you are using a consumer that uses ALSA, then you should start + jackd with the dummy driver: jackd -d dummy. + I also recommend using a period size of 2048: -p 2048. + + jackd -ddummy -r48000 -p2048 + + Initialisation Properties + + int in - in point + int out - out point + + The following can be used without a rack file in order to connect + filter_jackrack to a running instance of JackRack: + string out_1 - Jack port to connect MLT's output port (JackRack's input) + string out_2 - Jack port to connect MLT's output port (JackRack's input) + string in_1 - Jack port to connect MLT's input port (JackRack's output) + string in_2 - Jack port to connect MLT's input port (JackRack's output) + + Read Only Properties + + none + + Mutable Properties + + none + + Dependencies + + Jack, LADSPA, glib-2.0, libxml2 + + Known Bugs + + Currently, due to timing and synchronisation issues, the audio + is distorted with repeated samples and latency clicks. + no encapsulated resampling and jack runs at a fixed frequency + + ladspa + + Description + + Runs a JackRack project to process audio through a stack of + LADSPA filters without using Jack. + + Constructor Argument + + src - a JackRack file + + Details + + Due to audio integrity issues with the jackrack filter, this + filter is better for runtime, while jackrack is more suitable + for prototyping a rack file using the Jack Rack GUI. + Initialisation Properties + + int in - in point + int out - out point + + Read Only Properties + + none + + Mutable Properties + + none + + Dependencies + + Jack, LADSPA, glib-2.0, libxml2 + Jack is still required because this coexists with the jackrack + filter. + + Known Bugs + + no encapsulated resampling and jack runs at a fixed frequency + + luma + + Description + + Applies a luma transition between the current and next frames. + Useful for transitions from a slideshow created using producer + pixbuf. + + Constructor Argument + + file - a luma wipe + + Initialisation Properties + + int in - in point + int out - out point + + Read Only Properties + + none + + Mutable Properties + + int period - how long to wait between success iterations of the + transition. For best results set this to a multiple + of ttl used in pixbuf. The default is 24. + + luma. - all properties beginning with "luma." are passed to the + encapsulated luma transition. For example, luma.out controls + the duration of the wipe. + + Dependencies + + transition_luma and its dependencies + + Known Bugs + + none + + mirror + + Description + + Provides various mirror and image reversing effects. + + Constructor Argument + + mirror - horizontal, vertical, diagonal, flip, flop + + Initialisation Properties + + int reverse - being 0 or 1 + int in - in point + int out - out point + + Read Only Properties + + none + + Mutable Properties + + none + + Dependencies + + none + + Known Bugs + + none + + + mono + + Description + + Mix all channels of audio into a mono signal and output it as + N channels. + + Constructor Argument + + channels - the number of output channels (default 2) + + Initialisation Properties + + none + + Read Only Properties + + none + + Mutable Properties + + none + + Dependencies + + none + + Known Bugs + + none + + + obscure + + Description + + Obscuring filter. + + Constructor Argument + + none + + Initialisation Properties + + string start - in the format X/Y:WxH[:PWxPY] + - PWxPY is the size of the averaging region in pixels. + string end - in the format X/Y:WxH[:PWxPY] + int in - in point + int out - out point + + Read Only Properties + + none + + Dependencies + + none + + Known Bugs + + none + + region + + Description + + Apply one or more filters to a region of the video image. The region + can be shaped as well using the alpha channel of another producer. + + Constructor Argument + + resource - A file whose alpha channel will "shape" the region. + - The string "circle" is a shortcut but it requires pixbuf with + the librsvg loader. The circle is automatically stretched + to the region to create an ellipse. + + Initialisation Properties + + int in - in point + int out - out point + plus and region transition properties + + Read Only Properties + + see the region transition + + Dependencies + + transition_region + + Known Bugs + + "circle" is unpredictable in the absence of the librsvg pixbuf loader. + + + resample + + Description + + Adjust an audio stream's sampling rate, and duplicate channels if + producer provides less than consumer requested. + + This filter is automatically invoked by the loader producer for the + sake of normalisation over inputs and with the consumer. + + Constructor Argument + + frequency - a numeric value for the new sample rate + + Initialisation Properties + + int in - in point + int out - out point + + Mutable Properties + + int frequency - the target sample rate + + Dependencies + + libresample + + Known Bugs + + Assumes 2 channels during libsamplerate initialisation. Untested + with >2 channels. + + rescale + + Description + + Scale the producer video frame size to match the consumer. + This filter is designed for use as a normaliser for the loader producer. + + Constructor Argument + + None. + + Initialisation Properties + + int in - in point + int out - out point + + Mutable Properties + + If a property "consumer_aspect_ratio" exists on the frame, then + rescaler normalises the producer's aspect ratio and maximises the + size of the frame, but may not produce the consumer's requested + dimension. Therefore, this option works best in conjunction with the + resize filter. This behavior can be disabled by another service by + either removing the property, setting it to zero, or setting + frame property "distort" to 1. + + Dependencies + + none + + Known Bugs + + none but... it only implements a nearest neighbour scaling - it is + used as the base class for the gtkrescale and mcrescale filters. + resize - Description - Constructor Argument - Initialisation Properties - Read Only Properties - Dependencies - Known Bugs + Description + + Image scaling and padding and field order adjustment. + + Details + + Normally resize is used to pad the producer's + output to what the consumer has requested after an upstream rescale + filter first scales the image to maximise usage of the image area. + This filter also adjusts the field order to lower field first + if the frame property "top_field_first" has been set to 1. + Therefore, when done, it sets the top_field_first to 0. + This filter is automatically invoked by the loader as part of image + sample aspect ratio normalisation. + + Constructor Argument + + scale - "affine" to use affine transform scaling, otherwise + center and pad. + + Initialisation Properties + + int in - in point + int out - out point + + Read Only Properties + + none + + Dependencies + + none + + Known Bugs + + Assumes lower field first output. + + volume + + Description + + Adjust an audio stream's volume level + - based on the 'normalize' utility + + Constructor Argument + + gain - a string containing one of: + - a floating point value of the gain adjustment + - a numeric value with the suffix "dB" to adjust in terms of decibels + - "normalise" to normalise the volume to the target amplitude -12dBFS + + Initialisation Properties + + int in - in point + int out - out point + int window - the number of video frames over which to smooth normalisation. + defaults to 75. + + Mutable Properties + + string gain - same as constructor argument above + + string normalise - normalise the volume to the amplitude: + - a numeric value with the suffix "dB" to set amplitude in decibels + - a floating point value of the relative volume + - an unspecified value uses the default -12dBFS + + string limiter - limit all samples above: + - a numeric value with the suffix "dB" + - a floating point value ( dB = 20 * log10(x) ) + - an unspecified value uses the default -6dBFS + + double max_gain - a floating point or decibel value of the maximum gain that + can be applied during normalisation. + - an unspecified value uses the default 20dB + + string end - a gain value just like the gain property above. + This causes the gain to be interpolated from 'gain' to 'end' + over the duration. + + int window - the size of the normalising smoothing buffer in video frame units. + - the smoothing buffer prevents erratic gain changes. + - the default value is 75 video frames. + + gain can be applied as a factor to the normalise amplitude! + + Dependencies + + none + + Known Bugs + + none + + watermark + + Description + + Add a watermark to the frames. + + Constructor Argument + + resource - the producer to use (ie: a .png) + + Initialisation Properties + + string resource - the producer to use + string factory - producer required for the resource (default: 'loader') + string composite.geometry - composite geometry + string composite.distort - control scaling + int in - in point + int out - out point + + Mutable Properties + + none + + Dependencies + + mlt core modules and optionally, loader + + Known Bugs + + none Transitions ----------- composite - Description - Constructor Argument - Initialisation Properties - Read Only Properties - Dependencies - Known Bugs + Description + + A key-framable alpha-channel compositor for two frames. + + Details + + Performs dissolves and luma wipes in addition to alpha compositing. + + By default, the aspect ratio of the B frame is respected and the + size portion of the geometry specification simply defines a + bounding rectangle. + + This performs field-based rendering unless the A frame property + "progressive" or "consumer_progressive" or the transition property + "progressive" is set to 1. + + Constructor Argument + + none[*] + + Initialisation Properties + + int in - in point + int out - out point + string factory - The name of a factory service used as a non-PGM + producer loader. The default is 'loader'. + + Read Only Properties + + none + + Mutable Properties + + + string geometry - key frame specification + - this is a ; delimited form of the deprecated start, + key[n], end properties + int progressive - set to 1 to disable field-based rendering. + string distort - when set, causes the B frame image to fill the WxH + completely with no regard to B's aspect ratio. + string halign - when not distorting, set the horizontal alignment + of B within the geometry rectangle. + - one of: left (0), centre (1), or right (2). + - the default is left. + string valign - when not distorting, set the vertical alignment of + B within the geometry rectangle. + - one of: top (0), middle (1), or bottom (2). + - the default is top. + string luma - the luma map file name. If not supplied, a dissolve. + double softness - only when using a luma map, how soft to make the + edges between A and B. 0.0 = no softness. 1.0 = + too soft. + Any property starting with "luma." is passed to the non-PGM luma + producer. + + Deprecated Properties + + string start - a geometry specification as X/Y:WxH[!][:mix] + - X, Y, W, H are assumed to pixel units unless they + have the suffix '%' + - '!' is a shortcut to specify distort, see below. + - mix is always a 2 digit percentage, defaults to 100. + - default is "85%/5%:10%x10%" + string end - the ending size and position. + string key[F] - X/Y:WxH[:mix] - set a key frame for geometry between + the in and out. F is a frame number and can be + negative to make it relative to the out point. + + Dependencies + + none + + Known Bugs + + Assumes lower field first during field rendering. luma - Description - Constructor Argument - Initialisation Properties - Read Only Properties - Dependencies - Known Bugs + Description + + A generic dissolve and wipe transition processor. + + Details + + luma gets its name + from how it uses a grayscale "map" file. As the luma value varies + over time, a threshold filter is applied to the map to determine + what parts of frame A vs. frame B to show. It reads PGM files + up to 16 bits! Alternatively, it can use the first frame from any + producer that outputs yuv, but it will be limited to the luma + gamut of 220 values. + This performs field-based rendering unless the A frame property + "progressive" or "consumer_progressive" or the transition property + "progressive" is set to 1. + + Constructor Argument + + string resource - the luma map file name - either PGM or any other + producable video. + - If not supplied, a dissolve. + + Initialisation Properties + + int in - in point + int out - out point + string factory - The name of a factory service used as a non-PGM + producer loader. The default is 'loader'. + + Mutable Properties + + string resource - same as above + double softness - only when using a luma map, how soft to make the + edges between A and B. 0.0 = no softness. 1.0 = + too soft. + int reverse - reverse the direction of the transition. + Any property starting with "producer." is passed to the non-PGM luma + producer. + + Read Only Properties + + none + + Dependencies + + none + + Known Bugs + + Assumes lower field first output. + + mix + + Description + + An two stream audio mixer. + + Constructor Argument + + start - see below + + Initalisation Properties + + int in - in point + int out - out point + + Mutable Properties + + double start - the mix level to apply to the second frame. + - any negative value causes an automatic crossfade from 0 to 1. + double end - the ending value of the mix level. mix level will be interpolated + from start to end over the in-out range. + int reverse - set to 1 to reverse the direction of the mix. + + Read Only Properties + + none + + Dependencies + + none + + Known Bugs + + Samples from the longer of the two frames are discarded. + + + region + + Description + + Apply zero or more filters to B frame as it is composited onto + a region of the A frame. The "shape" of the region can be defined + by the alpha channel of a third producer. + + Constructor Argument + + resource - a shape producer + + Initialisation Properties + + string resource - nothing is rectangle, "circle" is a pixbuf- + generated SVG circle, anything else is loaded by the factory. + string factory - the service that creates the shape producer. + - the default is 'loader'. + string filter[N] - one or more filters to apply. All filter + properties are passed using the same filter "key" + Any property starting with "composite." is passed to the + encapsulated composite transition. + + Read Only Properties + + none + + Dependencies + + transition_composite + + Known Bugs + + none + Consumers --------- - bluefish + avformat - Description - Constructor Argument - Initialisation Properties - Read Only Properties - Dependencies - Known Bugs - - ffmpeg + Description + + Multiformat transcoding consumer. + + Constructor Argument + + string target - the filename to write to, e.g. test.mpeg. + + Initialisation Properties + + int buffer - the number of frames to buffer, minimum 1, default 25. + string rescale - a rescale method, see the Filters/rescale. + int progressive - indicates whether to use progressive or field- + based rendering, default 0 (off). + + Read Only Properties + + none + + Dependencies + + libavformat + + Known Bugs + + Plenty. + + libdv - Description - Constructor Argument - Initialisation Properties - Read Only Properties - Dependencies - Known Bugs + Description + + libdv dv producer. + + Constructor Argument + + string target - the filename to write to, e.g. /dev/dv1394. + + Initialisation Properties + + int buffer - the number of frames to buffer, minimum 1, default 25. + string rescale - a rescale method, see the Filters/rescale. + + Mutable Properties + + int progressive - indicates whether to use progressive or field- + based rendering, default 0 (off). + + Read Only Properties + + none + + Dependencies + + libdv + + Known Bugs + + none sdl - Description - Constructor Argument - Initialisation Properties - Read Only Properties - Dependencies - Known Bugs + + Description + + Simple DirectMedia Layer audio and video output module. + + Constructor Argument + + string video_standard - "PAL" (default), "NTSC", or "WxH" + + Initialisation Properties + + int buffer - the number of frames to buffer, minimum 1, default 25. + string rescale - a rescale method, see the Filters/rescale. + - Hint: "none" works very good with SDL output. + + Mutable Properties + + double volume - audio level factor + int video_off - if 1, disable video output + int audio_off - if 1, disable audio output + int resize - TODO + int progressive - indicates whether to use progressive or field- + based rendering, default 0 (off). + int audio_buffer - size of the sdl audio buffer (default: 1024) + + Read Only Properties + + none + + Dependencies + + libSDL-1.2, libasound, libaudio, libXt, libX11, libXext, libSM, libICE + + Known Bugs + + none + + xml + + Description + + Serialise the service network to XML. + See docs/mlt-xml.txt for more information. + + Constructor Argument + + resource - the name of a file in which to store the XML. + - stdout is default. + + Initialisation Properties + + string resource - same as above. + + Dependencies + + libxml2 + + Known Bugs + + Untested arbitrary nesting of multitracks and playlists. + Property "id" is generated as service type followed by number if + no property named "id" exists, but it fails to guarantee uniqueness.