X-Git-Url: https://git.sesse.net/?a=blobdiff_plain;f=src%2Fmainwindow.cpp;h=93c3e9758db0186dfc350d03d2726ea98b494f21;hb=4d59dfaf4dc0b4702365ec4a2d8c86ba42a10fb9;hp=3e8e4cdc2e83377e17d18380938e57016dd631fe;hpb=e3e515a29c84ff477a5ccb5ce3826227441dfbb3;p=kdenlive diff --git a/src/mainwindow.cpp b/src/mainwindow.cpp index 3e8e4cdc..93c3e975 100644 --- a/src/mainwindow.cpp +++ b/src/mainwindow.cpp @@ -40,29 +40,32 @@ #include "renderwidget.h" #include "renderer.h" #include "audiosignal.h" -#ifndef NO_JOGSHUTTLE +#ifdef USE_JOGSHUTTLE #include "jogshuttle.h" #include "jogaction.h" #include "jogshuttleconfig.h" -#endif /* NO_JOGSHUTTLE */ +#endif #include "clipproperties.h" #include "wizard.h" -#include "editclipcommand.h" +#include "commands/editclipcommand.h" #include "titlewidget.h" #include "markerdialog.h" #include "clipitem.h" #include "interfaces.h" -#include "kdenlive-config.h" +#include "config-kdenlive.h" #include "cliptranscode.h" +#include "clipstabilize.h" #include "ui_templateclip_ui.h" #include "colorscopes/vectorscope.h" #include "colorscopes/waveform.h" #include "colorscopes/rgbparade.h" #include "colorscopes/histogram.h" -#include "audiospectrum.h" -#include "spectrogram.h" +#include "audioscopes/audiospectrum.h" +#include "audioscopes/spectrogram.h" #include "archivewidget.h" #include "databackup/backupwidget.h" +#include "utils/freesound.h" + #include #include @@ -98,7 +101,7 @@ #include #include #define KNS3 KNS -#endif /* KDE_IS_VERSION(4,3,80) */ +#endif #include #include #include @@ -112,6 +115,7 @@ #include #include +#include // Uncomment for deeper debugging //#define DEBUG_MAINW @@ -142,10 +146,10 @@ MainWindow::MainWindow(const QString &MltPath, const KUrl & Url, const QString & m_activeTimeline(NULL), m_recMonitor(NULL), m_renderWidget(NULL), -#ifndef NO_JOGSHUTTLE +#ifdef USE_JOGSHUTTLE m_jogProcess(NULL), m_jogShuttle(NULL), -#endif /* NO_JOGSHUTTLE */ +#endif m_findActivated(false), m_stopmotion(NULL) { @@ -155,6 +159,15 @@ MainWindow::MainWindow(const QString &MltPath, const KUrl & Url, const QString & // Init locale QLocale systemLocale = QLocale(); + setlocale(LC_NUMERIC, NULL); + char *separator = localeconv()->decimal_point; + if (separator != systemLocale.decimalPoint()) { + kDebug()<<"------\n!!! system locale is not similar to Qt's locale... be prepared for bugs!!!\n------"; + // HACK: There is a locale conflict, so set locale to at least have correct decimal point + if (strncmp(separator, ".", 1) == 0) systemLocale = QLocale::c(); + else if (strncmp(separator, ",", 1) == 0) systemLocale = QLocale("fr_FR.UTF-8"); + } + systemLocale.setNumberOptions(QLocale::OmitGroupSeparator); QLocale::setDefault(systemLocale); @@ -181,7 +194,7 @@ MainWindow::MainWindow(const QString &MltPath, const KUrl & Url, const QString & closeTabButton->adjustSize(); closeTabButton->setToolTip(i18n("Close the current tab")); m_timelineArea->setCornerWidget(closeTabButton); - connect(m_timelineArea, SIGNAL(currentChanged(int)), this, SLOT(activateDocument())); + //connect(m_timelineArea, SIGNAL(currentChanged(int)), this, SLOT(activateDocument())); connect(&m_findTimer, SIGNAL(timeout()), this, SLOT(findTimeout())); m_findTimer.setSingleShot(true); @@ -208,9 +221,20 @@ MainWindow::MainWindow(const QString &MltPath, const KUrl & Url, const QString & m_clipMonitorDock->setObjectName("clip_monitor"); m_clipMonitor = new Monitor("clip", m_monitorManager, QString(), m_timelineArea); m_clipMonitorDock->setWidget(m_clipMonitor); - connect(m_projectList, SIGNAL(clipSelected(DocClipBase *, QPoint)), m_clipMonitor, SLOT(slotSetClipProducer(DocClipBase *, QPoint))); - connect(m_projectList, SIGNAL(raiseClipMonitor()), m_clipMonitor, SLOT(activateMonitor())); + // Connect the project list + connect(m_projectList, SIGNAL(clipSelected(DocClipBase *, QPoint, bool)), m_clipMonitor, SLOT(slotSetClipProducer(DocClipBase *, QPoint, bool))); + connect(m_projectList, SIGNAL(raiseClipMonitor()), m_clipMonitor, SLOT(activateMonitor())); + connect(m_projectList, SIGNAL(loadingIsOver()), this, SLOT(slotElapsedTime())); + connect(m_projectList, SIGNAL(displayMessage(const QString&, int)), this, SLOT(slotGotProgressInfo(const QString&, int))); + connect(m_projectList, SIGNAL(updateRenderStatus()), this, SLOT(slotCheckRenderStatus())); + connect(m_projectList, SIGNAL(clipNeedsReload(const QString&)),this, SLOT(slotUpdateClip(const QString &))); + connect(m_projectList, SIGNAL(updateProfile(const QString &)), this, SLOT(slotUpdateProjectProfile(const QString &))); + connect(m_projectList, SIGNAL(refreshClip(const QString &, bool)), m_monitorManager, SLOT(slotRefreshCurrentMonitor(const QString &))); + connect(m_projectList, SIGNAL(findInTimeline(const QString&)), this, SLOT(slotClipInTimeline(const QString&))); + connect(m_clipMonitor, SIGNAL(zoneUpdated(QPoint)), m_projectList, SLOT(slotUpdateClipCut(QPoint))); + connect(m_clipMonitor, SIGNAL(extractZone(const QString &, QPoint)), m_projectList, SLOT(slotCutClipJob(const QString &, QPoint))); + m_projectMonitorDock = new QDockWidget(i18n("Project Monitor"), this); m_projectMonitorDock->setObjectName("project_monitor"); m_projectMonitor = new Monitor("project", m_monitorManager, QString()); @@ -224,7 +248,8 @@ MainWindow::MainWindow(const QString &MltPath, const KUrl & Url, const QString & connect(m_recMonitor, SIGNAL(addProjectClip(KUrl)), this, SLOT(slotAddProjectClip(KUrl))); connect(m_recMonitor, SIGNAL(addProjectClipList(KUrl::List)), this, SLOT(slotAddProjectClipList(KUrl::List))); connect(m_recMonitor, SIGNAL(showConfigDialog(int, int)), this, SLOT(slotPreferences(int, int))); -#endif + +#endif /* ! Q_WS_MAC */ m_monitorManager->initMonitors(m_clipMonitor, m_projectMonitor, m_recMonitor); m_notesDock = new QDockWidget(i18n("Project Notes"), this); @@ -245,6 +270,7 @@ MainWindow::MainWindow(const QString &MltPath, const KUrl & Url, const QString & m_effectStack = new EffectStackView(m_projectMonitor); m_effectStackDock->setWidget(m_effectStack); addDockWidget(Qt::TopDockWidgetArea, m_effectStackDock); + connect(m_effectStack, SIGNAL(startFilterJob(ItemInfo, const QString&,const QString&,const QString&,const QString&,const QString&,const QString&,const QString&)), m_projectList, SLOT(slotStartFilterJob(ItemInfo, const QString&,const QString&,const QString&,const QString&,const QString&,const QString&,const QString&))); m_transitionConfigDock = new QDockWidget(i18n("Transition"), this); m_transitionConfigDock->setObjectName("transition"); @@ -464,15 +490,20 @@ MainWindow::MainWindow(const QString &MltPath, const KUrl & Url, const QString & loadPlugins(); loadTranscoders(); + loadStabilize(); m_projectMonitor->setupMenu(static_cast(factory()->container("monitor_go", this)), m_playZone, m_loopZone, NULL, m_loopClip); m_clipMonitor->setupMenu(static_cast(factory()->container("monitor_go", this)), m_playZone, m_loopZone, static_cast(factory()->container("marker_menu", this))); QMenu *clipInTimeline = static_cast(factory()->container("clip_in_timeline", this)); clipInTimeline->setIcon(KIcon("go-jump")); - m_projectList->setupGeneratorMenu(static_cast(factory()->container("generators", this)), - static_cast(factory()->container("transcoders", this)), - clipInTimeline); + QHash menus; + menus.insert("addMenu",static_cast(factory()->container("generators", this))); + menus.insert("extractAudioMenu",static_cast(factory()->container("extract_audio", this))); + menus.insert("transcodeMenu",static_cast(factory()->container("transcoders", this))); + menus.insert("stabilizeMenu",static_cast(factory()->container("stabilize", this))); + menus.insert("inTimelineMenu",clipInTimeline); + m_projectList->setupGeneratorMenu(menus); // build themes menus QMenu *themesMenu = static_cast(factory()->container("themes_menu", this)); @@ -574,7 +605,6 @@ MainWindow::MainWindow(const QString &MltPath, const KUrl & Url, const QString & connect(m_projectMonitorDock, SIGNAL(visibilityChanged(bool)), m_projectMonitor, SLOT(refreshMonitor(bool))); connect(m_clipMonitorDock, SIGNAL(visibilityChanged(bool)), m_clipMonitor, SLOT(refreshMonitor(bool))); - //connect(m_monitorManager, SIGNAL(connectMonitors()), this, SLOT(slotConnectMonitors())); connect(m_monitorManager, SIGNAL(checkColorScopes()), this, SLOT(slotUpdateColorScopes())); connect(m_monitorManager, SIGNAL(clearScopes()), this, SLOT(slotClearColorScopes())); connect(m_effectList, SIGNAL(addEffect(const QDomElement)), this, SLOT(slotAddEffect(const QDomElement))); @@ -605,13 +635,49 @@ MainWindow::MainWindow(const QString &MltPath, const KUrl & Url, const QString & m_projectList->slotAddClip(urls); } -#ifndef NO_JOGSHUTTLE +#ifdef USE_JOGSHUTTLE activateShuttleDevice(); -#endif /* NO_JOGSHUTTLE */ +#endif m_projectListDock->raise(); actionCollection()->addAssociatedWidget(m_clipMonitor->container()); actionCollection()->addAssociatedWidget(m_projectMonitor->container()); + + // Populate encoding profiles + KConfig conf("encodingprofiles.rc", KConfig::FullConfig, "appdata"); + if (KdenliveSettings::proxyparams().isEmpty() || KdenliveSettings::proxyextension().isEmpty()) { + KConfigGroup group(&conf, "proxy"); + QMap< QString, QString > values = group.entryMap(); + QMapIterator i(values); + if (i.hasNext()) { + i.next(); + QString data = i.value(); + KdenliveSettings::setProxyparams(data.section(';', 0, 0)); + KdenliveSettings::setProxyextension(data.section(';', 1, 1)); + } + } + if (KdenliveSettings::v4l_parameters().isEmpty() || KdenliveSettings::v4l_extension().isEmpty()) { + KConfigGroup group(&conf, "video4linux"); + QMap< QString, QString > values = group.entryMap(); + QMapIterator i(values); + if (i.hasNext()) { + i.next(); + QString data = i.value(); + KdenliveSettings::setV4l_parameters(data.section(';', 0, 0)); + KdenliveSettings::setV4l_extension(data.section(';', 1, 1)); + } + } + if (KdenliveSettings::decklink_parameters().isEmpty() || KdenliveSettings::decklink_extension().isEmpty()) { + KConfigGroup group(&conf, "decklink"); + QMap< QString, QString > values = group.entryMap(); + QMapIterator i(values); + if (i.hasNext()) { + i.next(); + QString data = i.value(); + KdenliveSettings::setDecklink_parameters(data.section(';', 0, 0)); + KdenliveSettings::setDecklink_extension(data.section(';', 1, 1)); + } + } } MainWindow::~MainWindow() @@ -783,7 +849,7 @@ void MainWindow::slotReloadEffects() m_effectList->reloadEffectList(m_effectsMenu, m_effectActions); } -#ifndef NO_JOGSHUTTLE +#ifdef USE_JOGSHUTTLE void MainWindow::activateShuttleDevice() { delete m_jogShuttle; @@ -801,7 +867,7 @@ void MainWindow::activateShuttleDevice() connect(m_jogShuttle, SIGNAL(forward(double)), m_monitorManager, SLOT(slotForward(double))); connect(m_jogShuttle, SIGNAL(action(const QString&)), this, SLOT(slotDoAction(const QString&))); } -#endif /* NO_JOGSHUTTLE */ +#endif /* USE_JOGSHUTTLE */ void MainWindow::slotDoAction(const QString& action_name) { @@ -1573,6 +1639,10 @@ void MainWindow::setupActions() QAction *addFolderButton = new KAction(KIcon("folder-new"), i18n("Create Folder"), this); collection.addAction("add_folder", addFolderButton); connect(addFolderButton , SIGNAL(triggered()), m_projectList, SLOT(slotAddFolder())); + + QAction *downloadAudio = new KAction(KIcon("download"), i18n("Download Audio"), this); + collection.addAction("download_audio", downloadAudio); + connect(downloadAudio , SIGNAL(triggered()), this, SLOT(slotDownloadAudio())); QAction *clipProperties = new KAction(KIcon("document-edit"), i18n("Clip Properties"), this); collection.addAction("clip_properties", clipProperties); @@ -1778,14 +1848,6 @@ void MainWindow::newFile(bool showProjectSettings, bool force) QMap documentProperties; QPoint projectTracks(KdenliveSettings::videotracks(), KdenliveSettings::audiotracks()); if (!showProjectSettings) { - // set up default properties - documentProperties.insert("enableproxy", QString::number((int) KdenliveSettings::enableproxy())); - documentProperties.insert("generateproxy", QString::number((int) KdenliveSettings::generateproxy())); - documentProperties.insert("proxyminsize", QString::number(KdenliveSettings::proxyminsize())); - documentProperties.insert("proxyparams", KdenliveSettings::proxyparams()); - documentProperties.insert("proxyextension", KdenliveSettings::proxyextension()); - documentProperties.insert("generateimageproxy", QString::number((int) KdenliveSettings::generateimageproxy())); - documentProperties.insert("proxyimageminsize", QString::number(KdenliveSettings::proxyimageminsize())); if (!KdenliveSettings::activatetabs()) if (!closeCurrentDocument()) return; @@ -1874,6 +1936,7 @@ bool MainWindow::closeCurrentDocument(bool saveChanges) } } m_clipMonitor->slotSetClipProducer(NULL); + m_projectList->slotResetProjectList(); m_timelineArea->removeTab(m_timelineArea->indexOf(w)); if (m_timelineArea->count() == 1) { m_timelineArea->setTabBarHidden(true); @@ -2070,7 +2133,7 @@ void MainWindow::doOpenFile(const KUrl &url, KAutoSaveFile *stale) bool ok; TrackView *trackView = new TrackView(doc, &ok, this); - + connectDocument(trackView, doc); progressDialog.progressBar()->setValue(3); qApp->processEvents(); @@ -2221,7 +2284,7 @@ void MainWindow::slotEditProjectSettings() if (w->exec() == QDialog::Accepted) { QString profile = w->selectedProfile(); m_activeDocument->setProjectFolder(w->selectedFolder()); -#ifndef Q_WS_MAC +#ifndef Q_WS_MAC m_recMonitor->slotUpdateCaptureFolder(m_activeDocument->projectFolder().path(KUrl::AddTrailingSlash)); #endif if (m_renderWidget) m_renderWidget->setDocumentPath(m_activeDocument->projectFolder().path(KUrl::AddTrailingSlash)); @@ -2312,7 +2375,9 @@ void MainWindow::slotRenderProject() { if (!m_renderWidget) { QString projectfolder = m_activeDocument ? m_activeDocument->projectFolder().path(KUrl::AddTrailingSlash) : KdenliveSettings::defaultprojectfolder(); - m_renderWidget = new RenderWidget(projectfolder, m_projectList->useProxy(), this); + MltVideoProfile profile; + if (m_activeDocument) profile = m_activeDocument->mltProfile(); + m_renderWidget = new RenderWidget(projectfolder, m_projectList->useProxy(), profile, this); connect(m_renderWidget, SIGNAL(shutdown()), this, SLOT(slotShutdown())); connect(m_renderWidget, SIGNAL(selectedRenderProfile(QMap )), this, SLOT(slotSetDocumentRenderProfile(QMap ))); connect(m_renderWidget, SIGNAL(prepareRenderingData(bool, bool, const QString&)), this, SLOT(slotPrepareRendering(bool, bool, const QString&))); @@ -2410,7 +2475,6 @@ void MainWindow::connectDocument(TrackView *trackView, KdenliveDoc *doc) //cha disconnect(m_notesWidget, SIGNAL(textChanged()), m_activeDocument, SLOT(setModified())); disconnect(m_clipMonitor, SIGNAL(zoneUpdated(QPoint)), m_activeDocument, SLOT(setModified())); disconnect(m_projectList, SIGNAL(projectModified()), m_activeDocument, SLOT(setModified())); - disconnect(m_projectList, SIGNAL(updateProfile(const QString &)), this, SLOT(slotUpdateProjectProfile(const QString &))); disconnect(m_projectMonitor->render, SIGNAL(refreshDocumentProducers(bool, bool)), m_activeDocument, SLOT(checkProjectClips(bool, bool))); @@ -2428,7 +2492,9 @@ void MainWindow::connectDocument(TrackView *trackView, KdenliveDoc *doc) //cha disconnect(m_activeTimeline->projectView(), SIGNAL(transitionItemSelected(Transition*, int, QPoint, bool)), m_projectMonitor, SLOT(slotSetSelectedClip(Transition*))); disconnect(m_activeTimeline->projectView(), SIGNAL(playMonitor()), m_projectMonitor, SLOT(slotPlay())); disconnect(m_activeTimeline->projectView(), SIGNAL(displayMessage(const QString&, MessageType)), m_messageLabel, SLOT(setMessage(const QString&, MessageType))); - disconnect(m_activeTimeline->projectView(), SIGNAL(showClipFrame(DocClipBase *, QPoint, const int)), m_clipMonitor, SLOT(slotSetClipProducer(DocClipBase *, QPoint, const int))); + disconnect(m_activeTimeline->projectView(), SIGNAL(showClipFrame(DocClipBase *, QPoint, bool, const int)), m_clipMonitor, SLOT(slotSetClipProducer(DocClipBase *, QPoint, bool, const int))); + disconnect(m_projectList, SIGNAL(gotFilterJobResults(const QString &, int, int, const QString &, stringMap)), m_activeTimeline->projectView(), SLOT(slotGotFilterJobResults(const QString &, int, int, const QString &, stringMap))); + disconnect(m_activeTimeline, SIGNAL(cursorMoved()), m_projectMonitor, SLOT(activateMonitor())); disconnect(m_activeTimeline, SIGNAL(insertTrack(int)), this, SLOT(slotInsertTrack(int))); disconnect(m_activeTimeline, SIGNAL(deleteTrack(int)), this, SLOT(slotDeleteTrack(int))); @@ -2446,33 +2512,24 @@ void MainWindow::connectDocument(TrackView *trackView, KdenliveDoc *doc) //cha disconnect(m_activeTimeline->projectView(), SIGNAL(activateDocumentMonitor()), m_projectMonitor, SLOT(activateMonitor())); disconnect(m_activeTimeline, SIGNAL(zoneMoved(int, int)), this, SLOT(slotZoneMoved(int, int))); disconnect(m_projectList, SIGNAL(loadingIsOver()), m_activeTimeline->projectView(), SLOT(slotUpdateAllThumbs())); - disconnect(m_projectList, SIGNAL(displayMessage(const QString&, int)), this, SLOT(slotGotProgressInfo(const QString&, int))); - disconnect(m_projectList, SIGNAL(updateRenderStatus()), this, SLOT(slotCheckRenderStatus())); - disconnect(m_projectList, SIGNAL(clipNeedsReload(const QString&)), this, SLOT(slotUpdateClip(const QString &))); disconnect(m_projectList, SIGNAL(refreshClip(const QString &)), m_activeTimeline->projectView(), SLOT(slotRefreshThumbs(const QString &))); m_effectStack->clear(); } //m_activeDocument->setRenderer(NULL); - disconnect(m_projectList, SIGNAL(refreshClip(const QString &, bool)), m_monitorManager, SLOT(slotRefreshCurrentMonitor())); m_clipMonitor->stop(); } KdenliveSettings::setCurrent_profile(doc->profilePath()); KdenliveSettings::setProject_fps(doc->fps()); m_monitorManager->resetProfiles(doc->timecode()); + m_clipMonitorDock->raise(); m_projectList->setDocument(doc); m_transitionConfig->updateProjectFormat(doc->mltProfile(), doc->timecode(), doc->tracksList()); m_effectStack->updateProjectFormat(doc->mltProfile(), doc->timecode()); - connect(m_projectList, SIGNAL(refreshClip(const QString &, bool)), m_monitorManager, SLOT(slotRefreshCurrentMonitor())); connect(m_projectList, SIGNAL(refreshClip(const QString &, bool)), trackView->projectView(), SLOT(slotRefreshThumbs(const QString &, bool))); - connect(m_projectList, SIGNAL(clipNeedsReload(const QString&)),this, SLOT(slotUpdateClip(const QString &))); connect(m_projectList, SIGNAL(projectModified()), doc, SLOT(setModified())); - connect(m_projectList, SIGNAL(updateProfile(const QString &)), this, SLOT(slotUpdateProjectProfile(const QString &))); connect(m_projectList, SIGNAL(clipNameChanged(const QString, const QString)), trackView->projectView(), SLOT(clipNameChanged(const QString, const QString))); - connect(m_projectList, SIGNAL(findInTimeline(const QString&)), this, SLOT(slotClipInTimeline(const QString&))); - - //connect(trackView, SIGNAL(cursorMoved()), m_projectMonitor, SLOT(activateMonitor())); connect(trackView, SIGNAL(insertTrack(int)), this, SLOT(slotInsertTrack(int))); connect(trackView, SIGNAL(deleteTrack(int)), this, SLOT(slotDeleteTrack(int))); @@ -2482,7 +2539,6 @@ void MainWindow::connectDocument(TrackView *trackView, KdenliveDoc *doc) //cha connect(trackView->projectView(), SIGNAL(forceClipProcessing(const QString &)), m_projectList, SLOT(slotForceProcessing(const QString &))); connect(m_projectMonitor, SIGNAL(renderPosition(int)), trackView, SLOT(moveCursorPos(int))); connect(m_projectMonitor, SIGNAL(zoneUpdated(QPoint)), trackView, SLOT(slotSetZone(QPoint))); - connect(m_clipMonitor, SIGNAL(zoneUpdated(QPoint)), m_projectList, SLOT(slotUpdateClipCut(QPoint))); connect(m_projectMonitor, SIGNAL(zoneUpdated(QPoint)), doc, SLOT(setModified())); connect(m_clipMonitor, SIGNAL(zoneUpdated(QPoint)), doc, SLOT(setModified())); connect(m_projectMonitor, SIGNAL(durationChanged(int)), trackView, SLOT(setDuration(int))); @@ -2514,11 +2570,13 @@ void MainWindow::connectDocument(TrackView *trackView, KdenliveDoc *doc) //cha connect(trackView, SIGNAL(setZoom(int)), this, SLOT(slotSetZoom(int))); connect(trackView->projectView(), SIGNAL(displayMessage(const QString&, MessageType)), m_messageLabel, SLOT(setMessage(const QString&, MessageType))); - connect(trackView->projectView(), SIGNAL(showClipFrame(DocClipBase *, QPoint, const int)), m_clipMonitor, SLOT(slotSetClipProducer(DocClipBase *, QPoint, const int))); + connect(trackView->projectView(), SIGNAL(showClipFrame(DocClipBase *, QPoint, bool, const int)), m_clipMonitor, SLOT(slotSetClipProducer(DocClipBase *, QPoint, bool, const int))); connect(trackView->projectView(), SIGNAL(playMonitor()), m_projectMonitor, SLOT(slotPlay())); connect(trackView->projectView(), SIGNAL(clipItemSelected(ClipItem*, int, bool)), m_projectMonitor, SLOT(slotSetSelectedClip(ClipItem*))); connect(trackView->projectView(), SIGNAL(transitionItemSelected(Transition*, int, QPoint, bool)), m_projectMonitor, SLOT(slotSetSelectedClip(Transition*))); + + connect(m_projectList, SIGNAL(gotFilterJobResults(const QString &, int, int, const QString &, stringMap)), trackView->projectView(), SLOT(slotGotFilterJobResults(const QString &, int, int, const QString &, stringMap))); connect(m_effectStack, SIGNAL(updateEffect(ClipItem*, int, QDomElement, QDomElement, int)), trackView->projectView(), SLOT(slotUpdateClipEffect(ClipItem*, int, QDomElement, QDomElement, int))); connect(m_effectStack, SIGNAL(updateClipRegion(ClipItem*, int, QString)), trackView->projectView(), SLOT(slotUpdateClipRegion(ClipItem*, int, QString))); @@ -2535,9 +2593,6 @@ void MainWindow::connectDocument(TrackView *trackView, KdenliveDoc *doc) //cha connect(trackView->projectView(), SIGNAL(activateDocumentMonitor()), m_projectMonitor, SLOT(activateMonitor())); connect(trackView, SIGNAL(zoneMoved(int, int)), this, SLOT(slotZoneMoved(int, int))); connect(m_projectList, SIGNAL(loadingIsOver()), trackView->projectView(), SLOT(slotUpdateAllThumbs())); - connect(m_projectList, SIGNAL(loadingIsOver()), this, SLOT(slotElapsedTime())); - connect(m_projectList, SIGNAL(displayMessage(const QString&, int)), this, SLOT(slotGotProgressInfo(const QString&, int))); - connect(m_projectList, SIGNAL(updateRenderStatus()), this, SLOT(slotCheckRenderStatus())); trackView->projectView()->setContextMenu(m_timelineContextMenu, m_timelineContextClipMenu, m_timelineContextTransitionMenu, m_clipTypeGroup, (QMenu*)(factory()->container("marker_menu", this))); @@ -2564,13 +2619,12 @@ void MainWindow::connectDocument(TrackView *trackView, KdenliveDoc *doc) //cha m_activeDocument = doc; m_activeTimeline->updateProjectFps(); m_activeDocument->checkProjectClips(); -#ifndef Q_WS_MAC +#ifndef Q_WS_MAC m_recMonitor->slotUpdateCaptureFolder(m_activeDocument->projectFolder().path(KUrl::AddTrailingSlash)); #endif //Update the mouse position display so it will display in DF/NDF format by default based on the project setting. slotUpdateMousePosition(0); m_monitorManager->activateMonitor("clip"); - m_projectList->slotClipSelected(); // set tool to select tool m_buttonSelectTool->setChecked(true); } @@ -2632,7 +2686,7 @@ void MainWindow::slotPreferences(int page, int option) void MainWindow::slotUpdateCaptureFolder() { -#ifndef Q_WS_MAC +#ifndef Q_WS_MAC if (m_activeDocument) m_recMonitor->slotUpdateCaptureFolder(m_activeDocument->projectFolder().path(KUrl::AddTrailingSlash)); else m_recMonitor->slotUpdateCaptureFolder(KdenliveSettings::defaultprojectfolder()); #endif @@ -2655,9 +2709,10 @@ void MainWindow::updateConfiguration() // Update list of transcoding profiles loadTranscoders(); -#ifndef NO_JOGSHUTTLE + loadStabilize(); +#ifdef USE_JOGSHUTTLE activateShuttleDevice(); -#endif /* NO_JOGSHUTTLE */ +#endif } @@ -3000,10 +3055,10 @@ void MainWindow::slotEditItemDuration() m_activeTimeline->projectView()->editItemDuration(); } -void MainWindow::slotAddProjectClip(KUrl url) +void MainWindow::slotAddProjectClip(KUrl url, const QString &comment) { if (m_activeDocument) - m_activeDocument->slotAddClipFile(url, QString()); + m_activeDocument->slotAddClipFile(url, QString(), QString(), comment); } void MainWindow::slotAddProjectClipList(KUrl::List urls) @@ -3163,7 +3218,7 @@ void MainWindow::slotShowClipProperties(DocClipBase *clip) else newprops.insert("templatetext", description); //newprops.insert("xmldata", m_projectList->generateTemplateXml(newtemplate, description).toString()); if (!newprops.isEmpty()) { - EditClipCommand *command = new EditClipCommand(m_projectList, clip->getId(), clip->properties(), newprops, true); + EditClipCommand *command = new EditClipCommand(m_projectList, clip->getId(), clip->currentProperties(newprops), newprops, true); m_activeDocument->commandStack()->push(command); } } @@ -3178,7 +3233,7 @@ void MainWindow::slotShowClipProperties(DocClipBase *clip) if (dia_ui->exec() == QDialog::Accepted) { QMap newprops; newprops.insert("xmldata", dia_ui->xml().toString()); - if (dia_ui->outPoint() != clip->duration().frames(m_activeDocument->fps()) - 1) { + if (dia_ui->outPoint() != clip->duration().frames(m_activeDocument->fps())) { // duration changed, we need to update duration newprops.insert("out", QString::number(dia_ui->outPoint())); int currentLength = QString(clip->producerProperty("length")).toInt(); @@ -3193,7 +3248,7 @@ void MainWindow::slotShowClipProperties(DocClipBase *clip) dia_ui->saveTitle(path); } else newprops.insert("resource", QString()); } - EditClipCommand *command = new EditClipCommand(m_projectList, clip->getId(), clip->properties(), newprops, true); + EditClipCommand *command = new EditClipCommand(m_projectList, clip->getId(), clip->currentProperties(newprops), newprops, true); m_activeDocument->commandStack()->push(command); //m_activeTimeline->projectView()->slotUpdateClip(clip->getId()); m_activeDocument->setModified(true); @@ -3241,9 +3296,9 @@ void MainWindow::slotShowClipProperties(QList cliplist, QMapclipType() == IMAGE) - new EditClipCommand(m_projectList, clip->getId(), clip->properties(), newImageProps, true, command); + new EditClipCommand(m_projectList, clip->getId(), clip->currentProperties(newImageProps), newImageProps, true, command); else - new EditClipCommand(m_projectList, clip->getId(), clip->properties(), newProps, true, command); + new EditClipCommand(m_projectList, clip->getId(), clip->currentProperties(newProps), newProps, true, command); } m_activeDocument->commandStack()->push(command); for (int i = 0; i < cliplist.count(); i++) @@ -3661,7 +3716,7 @@ int MainWindow::getNewStuff(const QString &configFile) if (entry->status() == KNS::Entry::Installed) kDebug() << "// Installed files: " << entry->installedFiles(); } -#endif /* KDE_IS_VERSION(4,3,80) */ +#endif return entries.size(); } @@ -3749,10 +3804,34 @@ void MainWindow::slotMaximizeCurrent(bool) kDebug() << "CURRENT WIDGET: " << par->objectName(); } +void MainWindow::loadStabilize() +{ + QMenu* stabMenu= static_cast(factory()->container("stabilize", this)); + if (stabMenu){ + stabMenu->clear(); + Mlt::Profile profile; + if (Mlt::Factory::filter(profile,(char*)"videostab")){ + QAction *action=stabMenu->addAction("Videostab (vstab)"); + action->setData("videostab"); + connect(action,SIGNAL(triggered()), this, SLOT(slotStabilize())); + } + if (Mlt::Factory::filter(profile,(char*)"videostab2")){ + QAction *action=stabMenu->addAction("Videostab (transcode)"); + action->setData("videostab2"); + connect(action,SIGNAL(triggered()), this, SLOT(slotStabilize())); + } + } + + +} + void MainWindow::loadTranscoders() { QMenu *transMenu = static_cast(factory()->container("transcoders", this)); transMenu->clear(); + + QMenu *extractAudioMenu = static_cast(factory()->container("extract_audio", this)); + extractAudioMenu->clear(); KSharedConfigPtr config = KSharedConfig::openConfig("kdenlivetranscodingrc"); KConfigGroup transConfig(config, "Transcoding"); @@ -3761,15 +3840,44 @@ void MainWindow::loadTranscoders() QMapIterator i(profiles); while (i.hasNext()) { i.next(); - QStringList data = i.value().split(";", QString::SkipEmptyParts); - QAction *a = transMenu->addAction(i.key()); + QStringList data = i.value().split(";"); + QAction *a; + // separate audio transcoding in a separate menu + if (data.count() > 2 && data.at(2) == "audio") { + a = extractAudioMenu->addAction(i.key()); + } + else { + a = transMenu->addAction(i.key()); + } a->setData(data); - if (data.count() > 1) - a->setToolTip(data.at(1)); + if (data.count() > 1) a->setToolTip(data.at(1)); connect(a, SIGNAL(triggered()), this, SLOT(slotTranscode())); } } +void MainWindow::slotStabilize(KUrl::List urls) +{ + QString condition,filtername; + + if (urls.isEmpty()) { + QAction *action = qobject_cast(sender()); + if (action){ + filtername=action->data().toString(); + urls = m_projectList->getConditionalUrls(condition); + } + } + if (urls.isEmpty()) { + m_messageLabel->setMessage(i18n("No clip to transcode"), ErrorMessage); + return; + } + Mlt::Profile profile; + Mlt::Filter filter(profile,filtername.toUtf8().data()); + ClipStabilize *d=new ClipStabilize(urls,filtername,&filter); + connect(d, SIGNAL(addClip(KUrl)), this, SLOT(slotAddProjectClip(KUrl))); + d->show(); + +} + void MainWindow::slotTranscode(KUrl::List urls) { QString params; @@ -3780,9 +3888,10 @@ void MainWindow::slotTranscode(KUrl::List urls) QStringList data = action->data().toStringList(); params = data.at(0); if (data.count() > 1) desc = data.at(1); - if (data.count() > 2) condition = data.at(2); - urls << m_projectList->getConditionalUrls(condition); - urls.removeAll(KUrl()); + if (data.count() > 3) condition = data.at(3); + QStringList ids = m_projectList->getConditionalIds(condition); + m_projectList->slotTranscodeClipJob(ids, params, desc); + return; } if (urls.isEmpty()) { m_messageLabel->setMessage(i18n("No clip to transcode"), ErrorMessage); @@ -3791,7 +3900,6 @@ void MainWindow::slotTranscode(KUrl::List urls) ClipTranscode *d = new ClipTranscode(urls, params, desc); connect(d, SIGNAL(addClip(KUrl)), this, SLOT(slotAddProjectClip(KUrl))); d->show(); - //QProcess::startDetached("ffmpeg", parameters); } void MainWindow::slotTranscodeClip() @@ -3937,6 +4045,7 @@ void MainWindow::slotPrepareRendering(bool scriptExport, bool zoneOnly, const QS // We need to delete the "aspect_ratio" property because proxy clips // sometimes have different ratio than original clips EffectsList::removeProperty(e, "aspect_ratio"); + EffectsList::removeMetaProperties(e); } } } @@ -4289,7 +4398,6 @@ void MainWindow::slotDoUpdateAudioScopeFrameRequest() void MainWindow::slotUpdateColorScopes() { bool request = false; - kDebug()<<"// UPDATE SCOPES"; for (int i = 0; i < m_gfxScopesList.count(); i++) { // Check if we need the renderer to send a new frame for update if (!m_gfxScopesList.at(i)->widget()->visibleRegion().isEmpty() && !(static_cast(m_gfxScopesList.at(i)->widget())->autoRefreshEnabled())) request = true; @@ -4298,6 +4406,9 @@ void MainWindow::slotUpdateColorScopes() if (request && m_monitorManager->activeRenderer()) { m_monitorManager->activeRenderer()->sendFrameUpdate(); } + if (m_audiosignal->isVisible() && m_recMonitor->abstractRender()) { + connect(m_recMonitor->abstractRender(), SIGNAL(audioSamplesSignal(const QVector&, const int&, const int&, const int&)), m_audiosignal, SLOT(slotReceiveAudio(const QVector&, const int&, const int&, const int&))); + } } void MainWindow::slotClearColorScopes() @@ -4390,6 +4501,17 @@ void MainWindow::slotElapsedTime() kDebug()<<"-----------------------------------------\n"<<"Time elapsed: "<projectFolder().path(); + else currentFolder = KdenliveSettings::defaultprojectfolder(); + FreeSound *d = new FreeSound(currentFolder); + connect(d, SIGNAL(addClip(KUrl, const QString &)), this, SLOT(slotAddProjectClip(KUrl, const QString &))); + d->show(); +} + #include "mainwindow.moc" #ifdef DEBUG_MAINW