atmo/DmxTools.cpp atmo/DmxTools.h \
atmo/AtmoMultiConnection.cpp atmo/AtmoMultiConnection.h \
atmo/MoMoConnection.cpp atmo/MoMoConnection.h \
+ atmo/FnordlichtConnection.cpp atmo/FnordlichtConnection.h \
atmo/AtmoPacketQueue.cpp atmo/AtmoPacketQueue.h
SOURCES_gradfun = gradfun.c gradfun.h
noinst_HEADERS = filter_picture.h
m_AtmoZoneDefCount = -1;
m_DMX_BaseChannels = NULL;
+ m_chWhiteAdj_Red = NULL;
+ m_chWhiteAdj_Green = NULL;
+ m_chWhiteAdj_Blue = NULL;
+
LoadDefaults();
}
m_ZoneDefinitions = NULL;
}
+ delete []m_chWhiteAdj_Red;
+ delete []m_chWhiteAdj_Green;
+ delete []m_chWhiteAdj_Blue;
+
free( m_DMX_BaseChannels );
#if defined (_ATMO_VLC_PLUGIN_)
m_UpdateEdgeWeightningFlag = 0;
-
-
m_Software_gamma_mode = agcNone;
m_Software_gamma_red = 10;
m_Software_gamma_green = 10;
m_WhiteAdjustment_Blue = 255;
m_UseSoftwareWhiteAdj = 1;
+ m_WhiteAdjPerChannel = ATMO_FALSE;
+ m_chWhiteAdj_Count = 0;
+
+ delete []m_chWhiteAdj_Red;
+ delete []m_chWhiteAdj_Green;
+ delete []m_chWhiteAdj_Blue;
+
+ m_chWhiteAdj_Red = NULL;
+ m_chWhiteAdj_Green = NULL;
+ m_chWhiteAdj_Blue = NULL;
+
m_ColorChanger_iSteps = 50;
m_ColorChanger_iDelay = 25;
m_LiveView_DisplayNr = 0;
m_LiveView_FrameDelay = 30;
m_LiveView_GDI_FrameRate = 25;
+ m_LiveView_RowsPerFrame = 0;
m_Hardware_global_gamma = 128;
m_DMX_RGB_Channels = 5; // so wie atmolight
m_MoMo_Channels = 3; // default momo, there exists also a 4 ch version!
+ m_Fnordlicht_Amount = 2; // default fnordlicht, there are 2 fnordlicht's!
m_ZonesTopCount = 1;
m_ZonesBottomCount = 1;
m_ZoneSummary = ATMO_FALSE;
UpdateZoneCount();
-
clearAllChannelMappings();
m_CurrentChannelAssignment = 0;
CAtmoChannelAssignment *temp = new CAtmoChannelAssignment();
this->m_WhiteAdjustment_Blue = pAtmoConfigSrc->m_WhiteAdjustment_Blue;
this->m_UseSoftwareWhiteAdj = pAtmoConfigSrc->m_UseSoftwareWhiteAdj;
+ this->m_WhiteAdjPerChannel = pAtmoConfigSrc->m_WhiteAdjPerChannel;
+ this->m_chWhiteAdj_Count = pAtmoConfigSrc->m_chWhiteAdj_Count;
+ delete []m_chWhiteAdj_Red;
+ delete []m_chWhiteAdj_Green;
+ delete []m_chWhiteAdj_Blue;
+ if(m_chWhiteAdj_Count > 0)
+ {
+ m_chWhiteAdj_Red = new int[ m_chWhiteAdj_Count ];
+ m_chWhiteAdj_Green = new int[ m_chWhiteAdj_Count ];
+ m_chWhiteAdj_Blue = new int[ m_chWhiteAdj_Count ];
+ memcpy(m_chWhiteAdj_Red, pAtmoConfigSrc->m_chWhiteAdj_Red, sizeof(int) * m_chWhiteAdj_Count);
+ memcpy(m_chWhiteAdj_Green, pAtmoConfigSrc->m_chWhiteAdj_Green, sizeof(int) * m_chWhiteAdj_Count);
+ memcpy(m_chWhiteAdj_Blue, pAtmoConfigSrc->m_chWhiteAdj_Blue, sizeof(int) * m_chWhiteAdj_Count);
+ } else {
+ m_chWhiteAdj_Red = NULL;
+ m_chWhiteAdj_Green = NULL;
+ m_chWhiteAdj_Blue = NULL;
+ }
+
this->m_IsSetShutdownColor = pAtmoConfigSrc->m_IsSetShutdownColor;
this->m_ShutdownColor_Red = pAtmoConfigSrc->m_ShutdownColor_Red;
this->m_ShutdownColor_Green = pAtmoConfigSrc->m_ShutdownColor_Green;
this->m_show_statistics = pAtmoConfigSrc->m_show_statistics;
-
this->m_LiveView_EdgeWeighting = pAtmoConfigSrc->m_LiveView_EdgeWeighting;
this->m_LiveView_BrightCorrect = pAtmoConfigSrc->m_LiveView_BrightCorrect;
this->m_LiveView_DarknessLimit = pAtmoConfigSrc->m_LiveView_DarknessLimit;
this->m_LiveView_DisplayNr = pAtmoConfigSrc->m_LiveView_DisplayNr;
this->m_LiveView_FrameDelay = pAtmoConfigSrc->m_LiveView_FrameDelay;
this->m_LiveView_GDI_FrameRate = pAtmoConfigSrc->m_LiveView_GDI_FrameRate;
+ this->m_LiveView_RowsPerFrame = pAtmoConfigSrc->m_LiveView_RowsPerFrame;
this->m_ZonesTopCount = pAtmoConfigSrc->m_ZonesTopCount;
this->m_ZonesBottomCount = pAtmoConfigSrc->m_ZonesBottomCount;
this->m_MoMo_Channels = pAtmoConfigSrc->m_MoMo_Channels;
+ this->m_Fnordlicht_Amount = pAtmoConfigSrc->m_Fnordlicht_Amount;
+
this->m_CurrentChannelAssignment = pAtmoConfigSrc->m_CurrentChannelAssignment;
clearChannelMappings();
UpdateZoneDefinitionCount();
}
-
-
int CAtmoConfig::getNumChannelAssignments() {
int z=0;
for(int i=0;i<10;i++)
m_computed_zones_count++;
}
-
-
int CAtmoConfig::getZoneCount()
{
return(m_computed_zones_count);
m_DMX_BaseChannels = strdup(channels);
}
+void CAtmoConfig::getChannelWhiteAdj(int channel,int &red,int &green,int &blue)
+{
+ if(channel >= m_chWhiteAdj_Count)
+ {
+ red = 256;
+ green = 256;
+ blue = 256;
+
+ } else {
+
+ red = m_chWhiteAdj_Red[ channel ];
+ green = m_chWhiteAdj_Green[ channel ];
+ blue = m_chWhiteAdj_Blue[ channel ];
+
+ }
+}
+
+void CAtmoConfig::setChannelWhiteAdj(int channel,int red,int green,int blue)
+{
+ if(channel >= m_chWhiteAdj_Count)
+ {
+ int *tmp = new int[channel+1];
+ if(m_chWhiteAdj_Red)
+ memcpy( tmp, m_chWhiteAdj_Red, m_chWhiteAdj_Count * sizeof(int) );
+ delete []m_chWhiteAdj_Red;
+ m_chWhiteAdj_Red = tmp;
+
+ tmp = new int[channel + 1];
+ if(m_chWhiteAdj_Green)
+ memcpy( tmp, m_chWhiteAdj_Green, m_chWhiteAdj_Count * sizeof(int) );
+ delete []m_chWhiteAdj_Green;
+ m_chWhiteAdj_Green = tmp;
+
+ tmp = new int[channel + 1];
+ if(m_chWhiteAdj_Blue)
+ memcpy( tmp, m_chWhiteAdj_Blue, m_chWhiteAdj_Count * sizeof(int) );
+ delete []m_chWhiteAdj_Blue;
+ m_chWhiteAdj_Blue = tmp;
+
+ m_chWhiteAdj_Count = channel + 1;
+ }
+
+ m_chWhiteAdj_Red[channel] = red;
+ m_chWhiteAdj_Green[channel] = green;
+ m_chWhiteAdj_Blue[channel] = blue;
+
+}
# include <string.h>
#endif
-
class CAtmoConfig {
protected:
- int m_IsShowConfigDialog;
+ int m_IsShowConfigDialog;
#if defined(_ATMO_VLC_PLUGIN_)
char *m_devicename;
char *m_devicenames[3]; // additional Devices ?
int m_WhiteAdjustment_Green;
int m_WhiteAdjustment_Blue;
+ ATMO_BOOL m_WhiteAdjPerChannel;
+ int m_chWhiteAdj_Count;
+ int *m_chWhiteAdj_Red;
+ int *m_chWhiteAdj_Green;
+ int *m_chWhiteAdj_Blue;
+
protected:
int m_IsSetShutdownColor;
int m_ShutdownColor_Red;
CAtmoZoneDefinition **m_ZoneDefinitions;
int m_AtmoZoneDefCount;
-
/*
zone layout description for generating the default Zone weightning
*/
public:
int getZoneCount();
-
protected:
/* Live View Parameters (most interesting) */
AtmoFilterMode m_LiveViewFilterMode;
ATMO_BOOL m_show_statistics;
+ // number of rows to process each frame
+ int m_LiveView_RowsPerFrame;
+
// weighting of distance to edge
int m_LiveView_EdgeWeighting; // = 8;
// brightness correction
protected:
int m_MoMo_Channels;
+ protected:
+ int m_Fnordlicht_Amount;
+
protected:
AtmoGammaCorrect m_Software_gamma_mode;
public:
volatile int m_UpdateEdgeWeightningFlag;
-
public:
CAtmoConfig();
virtual ~CAtmoConfig();
ATMO_BOOL isUseSoftwareWhiteAdj() { return m_UseSoftwareWhiteAdj; }
void setUseSoftwareWhiteAdj(ATMO_BOOL value) { m_UseSoftwareWhiteAdj = value; }
+/* White ADJ per Channel settings */
+ ATMO_BOOL isWhiteAdjPerChannel() { return m_WhiteAdjPerChannel; }
+ void setWhiteAdjPerChannel( ATMO_BOOL value) { m_WhiteAdjPerChannel = value; }
+
+ void setChannelWhiteAdj(int channel,int red,int green,int blue);
+ void getChannelWhiteAdj(int channel,int &red,int &green,int &blue);
+
int isSetShutdownColor() { return m_IsSetShutdownColor; }
void SetSetShutdownColor(int value) { m_IsSetShutdownColor = value; }
int getShutdownColor_Red() { return m_ShutdownColor_Red; }
int getStaticColor_Blue() { return m_StaticColor_Blue; }
void setStaticColor_Blue(int value) { m_StaticColor_Blue=value; }
-
AtmoConnectionType getConnectionType() { return m_eAtmoConnectionType; }
void setConnectionType(AtmoConnectionType value) { m_eAtmoConnectionType = value; }
int getLiveView_EdgeWeighting() { return m_LiveView_EdgeWeighting; }
void setLiveView_EdgeWeighting(int value) { m_LiveView_EdgeWeighting=value; }
- int getLiveView_BrightCorrect() { return m_LiveView_BrightCorrect; }
+ int getLiveView_RowsPerFrame() { return m_LiveView_RowsPerFrame; }
+ void setLiveView_RowsPerFrame(int value) { m_LiveView_RowsPerFrame=value; }
+
+ int getLiveView_BrightCorrect() { return m_LiveView_BrightCorrect; }
void setLiveView_BrightCorrect(int value) { m_LiveView_BrightCorrect=value; }
int getLiveView_DarknessLimit() { return m_LiveView_DarknessLimit; }
int getHardware_gamma_blue() { return m_Hardware_gamma_blue; }
void setHardware_gamma_blue(int value) { m_Hardware_gamma_blue=value; }
-
AtmoGammaCorrect getSoftware_gamma_mode() { return m_Software_gamma_mode; }
int getSoftware_gamma_red() { return m_Software_gamma_red; }
int getSoftware_gamma_green() { return m_Software_gamma_green; }
int getMoMo_Channels() { return m_MoMo_Channels; }
void setMoMo_Channels(int chCount) { m_MoMo_Channels = chCount; }
+ int getFnordlicht_Amount() { return m_Fnordlicht_Amount; }
+ void setFnordlicht_Amount(int fnordlichtAmount) { m_Fnordlicht_Amount = fnordlichtAmount; }
+
};
#endif
actNUL = 3,
actMultiAtmo = 4,
actMondolight = 5,
- actMoMoLight = 6
+ actMoMoLight = 6,
+ actFnordlicht = 7
};
static const char *AtmoDeviceTypes[] = {
"Atmo-Classic",
"Nul-Device",
"Multi-Atmo",
"Mondolight",
- "MoMoLight"
-
+ "MoMoLight",
+ "Fnordlicht"
};
-#define ATMO_DEVICE_COUNT 7
+#define ATMO_DEVICE_COUNT 8
#if defined(_ATMO_VLC_PLUGIN_)
enum EffectMode {
#include "AtmoDmxSerialConnection.h"
#include "AtmoMultiConnection.h"
#include "MoMoConnection.h"
+#include "FnordlichtConnection.h"
#include "AtmoExternalCaptureInput.h"
#include <math.h>
# include "AtmoGdiDisplayCaptureInput.h"
#endif
-
CAtmoTools::CAtmoTools(void)
{
}
{
pDynData->LockCriticalSection();
-
CAtmoConnection *atmoConnection = pDynData->getAtmoConnection();
CAtmoConfig *atmoConfig = pDynData->getAtmoConfig();
if((atmoConnection != NULL) && (atmoConfig!=NULL) && atmoConfig->isSetShutdownColor()) {
return ATMO_TRUE;
}
+ case actFnordlicht: {
+ CFnordlichtConnection *tempConnection = new CFnordlichtConnection( atmoConfig );
+ if(tempConnection->OpenConnection() == ATMO_FALSE) {
+ pDynData->setAtmoConnection(tempConnection);
+ pDynData->UnLockCriticalSection();
+ return ATMO_FALSE;
+ }
+ pDynData->setAtmoConnection(tempConnection);
+ pDynData->ReloadZoneDefinitionBitmaps();
+
+ tempConnection->CreateDefaultMapping( atmoConfig->getChannelAssignment(0) );
+
+ CAtmoTools::SetChannelAssignment(pDynData, atmoConfig->getCurrentChannelAssignment() );
+
+ pDynData->UnLockCriticalSection();
+ return ATMO_TRUE;
+ }
+
default: {
pDynData->UnLockCriticalSection();
return ATMO_FALSE;
--- /dev/null
+/*
+ * FnordlichtConnection.h: class to access a FnordlichtLight Hardware
+ * - the description could be found
+ * here: http://github.com/fd0/fnordlicht/raw/master/doc/PROTOCOL
+ *
+ * (C) Kai Lauterbach (klaute at gmail.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * $Id$
+ */
+
+
+#include "AtmoDefs.h"
+#include "FnordlichtConnection.h"
+
+#if !defined(_ATMO_VLC_PLUGIN_)
+# include "FnordlichtConfigDialog.h"
+#endif
+
+#include <stdio.h>
+#include <fcntl.h>
+
+#if !defined(WIN32)
+#include <termios.h>
+#include <unistd.h>
+#endif
+
+CFnordlichtConnection::CFnordlichtConnection(CAtmoConfig *cfg)
+ : CAtmoConnection(cfg)
+{
+ m_hComport = INVALID_HANDLE_VALUE;
+}
+
+CFnordlichtConnection::~CFnordlichtConnection()
+{
+}
+
+ATMO_BOOL CFnordlichtConnection::OpenConnection()
+{
+#if defined(_ATMO_VLC_PLUGIN_)
+ char *serdevice = m_pAtmoConfig->getSerialDevice();
+ if ( !serdevice )
+ return ATMO_FALSE;
+#else
+ int portNummer = m_pAtmoConfig->getComport();
+ m_dwLastWin32Error = 0;
+ if ( portNummer < 1 )
+ return ATMO_FALSE; // make no real sense;-)
+#endif
+
+ CloseConnection();
+
+#if !defined(_ATMO_VLC_PLUGIN_)
+ char serdevice[16]; // com4294967295
+ sprintf(serdevice,"com%d",portNummer);
+#endif
+
+#if defined(WIN32)
+
+ m_hComport = CreateFile(serdevice,
+ GENERIC_WRITE, 0, NULL,
+ OPEN_EXISTING, 0, NULL);
+ if ( m_hComport == INVALID_HANDLE_VALUE )
+ {
+ // we have a problem here can't open com port...
+ // somebody else may use it?
+ // m_dwLastWin32Error = GetLastError();
+ return ATMO_FALSE;
+ }
+ /* change serial settings (Speed, stopbits etc.) */
+ DCB dcb; // für comport-parameter
+ dcb.DCBlength = sizeof(DCB);
+ GetCommState(m_hComport, &dcb); // ger current serialport settings
+ dcb.BaudRate = 19200; // set speed
+ dcb.ByteSize = 8; // set databits
+ dcb.Parity = NOPARITY; // set parity
+ dcb.StopBits = ONESTOPBIT; // set one stop bit
+ SetCommState(m_hComport, &dcb); // apply settings
+
+#else
+
+ int bconst = B19200;
+ m_hComport = open(serdevice,O_RDWR |O_NOCTTY);
+ if ( m_hComport < 0 )
+ return ATMO_FALSE;
+
+ struct termios tio;
+ memset(&tio,0,sizeof(tio));
+ tio.c_cflag = (CS8 | CREAD | HUPCL | CLOCAL);
+ tio.c_iflag = (INPCK | BRKINT);
+ cfsetispeed(&tio, bconst);
+ cfsetospeed(&tio, bconst);
+ if( ! tcsetattr(m_hComport, TCSANOW, &tio) )
+ tcflush(m_hComport, TCIOFLUSH);
+ else {
+ // can't change parms
+ close(m_hComport);
+ m_hComport = -1;
+ return false;
+ }
+
+#endif
+
+ // sync fnordlicht
+ if ( sync() )
+ // stop fading on all devices
+ if ( stop(255) )
+ return true; // fnordlicht initialized...
+
+ return false; // something is going wrong...
+}
+
+void CFnordlichtConnection::CloseConnection()
+{
+ if ( m_hComport != INVALID_HANDLE_VALUE )
+ {
+ reset(255);
+
+#if defined(WIN32)
+ CloseHandle(m_hComport);
+#else
+ close(m_hComport);
+#endif
+ m_hComport = INVALID_HANDLE_VALUE;
+ }
+}
+
+ATMO_BOOL CFnordlichtConnection::isOpen(void)
+{
+ return (m_hComport != INVALID_HANDLE_VALUE);
+}
+
+ATMO_BOOL CFnordlichtConnection::HardwareWhiteAdjust(int global_gamma,
+ int global_contrast,
+ int contrast_red,
+ int contrast_green,
+ int contrast_blue,
+ int gamma_red,
+ int gamma_green,
+ int gamma_blue,
+ ATMO_BOOL storeToEeprom)
+{
+ return ATMO_FALSE; //no hardware adjust required
+}
+
+/*
+ def fade_rgb(addr, r, g, b, step, delay)
+ $dev.write addr.chr
+ $dev.write "\x01"
+ $dev.write step.chr
+ $dev.write delay.chr
+ $dev.write r.chr
+ $dev.write g.chr
+ $dev.write b.chr
+ $dev.write "\x00\x00\x00\x00\x00"
+ $dev.write "\x00\x00\x00"
+ $dev.flush
+ end
+*/
+ATMO_BOOL CFnordlichtConnection::SendData(pColorPacket data)
+{
+ if ( m_hComport == INVALID_HANDLE_VALUE )
+ return ATMO_FALSE;
+
+ int amount = getAmountFnordlichter();
+ unsigned char buffer[15];
+ memset(&buffer, 0, sizeof(buffer) ); // zero buffer
+ int iBytesWritten;
+
+ Lock();
+
+ buffer[1] = 0x01; // fade to rgb color
+ buffer[2] = 0x80; // in two steps
+ buffer[3] = 0x01; // 1ms pause between steps
+
+ // send all packages to all fnordlicht's
+ for( unsigned char i=0; i < amount; i++ )
+ {
+ int idx;
+ if ( m_ChannelAssignment && i < m_NumAssignedChannels )
+ idx = m_ChannelAssignment[i];
+ else
+ idx = -1; // no channel assigned to fnordlicht[i]
+
+ if( idx >= 0 && idx <= data->numColors )
+ {
+ // fnordlicht address equals to a MoMo Channel
+ buffer[0] = i; // fnordlicht address (0..254, 255 = broadcast)
+ buffer[4] = data->zone[idx].r;
+ buffer[5] = data->zone[idx].g;
+ buffer[6] = data->zone[idx].b;
+ }
+
+#if defined(WIN32)
+ // send to COM-Port
+ WriteFile( m_hComport, buffer, sizeof(buffer),
+ (DWORD*)&iBytesWritten, NULL );
+#else
+ iBytesWritten = write(m_hComport, buffer, sizeof(buffer));
+ tcflush(m_hComport, TCIOFLUSH);
+ tcdrain(m_hComport); // flush buffer
+#endif
+
+ if (iBytesWritten != sizeof(buffer))
+ {
+ Unlock();
+ return ATMO_FALSE; // shouldn't be...
+ }
+
+ }
+
+ Unlock();
+
+ return ATMO_TRUE;
+}
+
+
+ATMO_BOOL CFnordlichtConnection::CreateDefaultMapping(CAtmoChannelAssignment *ca)
+{
+ if ( !ca )
+ return ATMO_FALSE;
+ ca->setSize( getAmountFnordlichter() ); // oder 4 ? depending on config!
+ ca->setZoneIndex(0, 0); // Zone 5
+ ca->setZoneIndex(1, 1);
+ ca->setZoneIndex(2, 2);
+ ca->setZoneIndex(3, 3);
+ return ATMO_TRUE;
+}
+
+int CFnordlichtConnection::getAmountFnordlichter()
+{
+ return m_pAtmoConfig->getFnordlicht_Amount();
+}
+
+/*
+ def sync(addr = 0)
+ 1.upto(15) do
+ $dev.write "\e"
+ end
+ $dev.write addr.chr
+ $dev.flush
+ end
+*/
+ATMO_BOOL CFnordlichtConnection::sync(void)
+{
+ if ( m_hComport == INVALID_HANDLE_VALUE )
+ return ATMO_FALSE;
+
+ unsigned char buffer[16];
+ int iBytesWritten;
+
+ Lock();
+
+ // fill buffer with 15 escape character
+ memset(&buffer, 0x1b, sizeof(buffer)-1);
+
+ buffer[sizeof(buffer)-1] = 0x00; // append one zero byte
+
+#if defined(WIN32)
+ // send to COM-Port
+ WriteFile( m_hComport, buffer, sizeof(buffer),
+ (DWORD*)&iBytesWritten, NULL );
+#else
+ iBytesWritten = write(m_hComport, buffer, sizeof(buffer));
+ tcflush(m_hComport, TCIOFLUSH);
+ tcdrain(m_hComport); // flush buffer
+#endif
+
+ Unlock();
+
+ return (iBytesWritten == sizeof(buffer)) ? ATMO_TRUE : ATMO_FALSE;
+
+}
+
+/*
+ def stop(addr, fading = 1)
+ $dev.write addr.chr
+ $dev.write "\x08"
+ $dev.write fading.chr
+ $dev.write "\x00\x00\x00\x00"
+ $dev.write "\x00\x00\x00\x00\x00"
+ $dev.write "\x00\x00\x00"
+ $dev.flush
+ end
+*/
+ATMO_BOOL CFnordlichtConnection::stop(unsigned char addr)
+{
+ if(m_hComport == INVALID_HANDLE_VALUE)
+ return ATMO_FALSE;
+
+ unsigned char buffer[15];
+ memset(&buffer, 0, sizeof(buffer)); // zero buffer
+ int iBytesWritten;
+
+ Lock();
+
+ buffer[0] = addr; // fnordlicht address (255 = broadcast)
+ buffer[1] = 0x08; // stop command
+ buffer[2] = 1; // fading
+
+#if defined(WIN32)
+ // send to COM-Port
+ WriteFile( m_hComport, buffer, sizeof(buffer),
+ (DWORD*)&iBytesWritten, NULL );
+#else
+ iBytesWritten = write(m_hComport, buffer, sizeof(buffer));
+ tcflush(m_hComport, TCIOFLUSH);
+ tcdrain(m_hComport); // flush buffer
+#endif
+
+ Unlock();
+
+ return (iBytesWritten == sizeof(buffer)) ? ATMO_TRUE : ATMO_FALSE;
+}
+
+/*
+*/
+ATMO_BOOL CFnordlichtConnection::reset(unsigned char addr)
+{
+ if(m_hComport == INVALID_HANDLE_VALUE)
+ return ATMO_FALSE;
+
+ stop(255);
+
+ if ( sync() && start_bootloader(addr) )
+ {
+#if defined(_ATMO_VLC_PLUGIN_)
+ do_sleep(200000); // wait 200ms
+#else
+ do_sleep(200); // wait 200ms
+#endif
+ if ( sync() && boot_enter_application(addr) )
+ return ATMO_TRUE;
+ }
+
+ return ATMO_FALSE;
+}
+
+/*
+ def start_bootloader(addr)
+ $dev.write(addr.chr)
+ $dev.write("\x80")
+ $dev.write("\x6b\x56\x27\xfc")
+ $dev.write("\x00\x00\x00\x00\x00\x00\x00\x00\x00")
+ $dev.flush
+ end
+*/
+ATMO_BOOL CFnordlichtConnection::start_bootloader(unsigned char addr)
+{
+ if(m_hComport == INVALID_HANDLE_VALUE)
+ return ATMO_FALSE;
+
+ unsigned char buffer[15];
+ memset(&buffer, 0, sizeof(buffer)); // zero buffer
+ int iBytesWritten;
+
+ Lock();
+
+ buffer[0] = addr; // fnordlicht address (255 = broadcast)
+ buffer[1] = 0x80; // start_bootloader
+ buffer[2] = 0x6b;
+ buffer[3] = 0x56;
+ buffer[4] = 0x27;
+ buffer[5] = 0xfc;
+
+#if defined(WIN32)
+ // send to COM-Port
+ WriteFile( m_hComport, buffer, sizeof(buffer),
+ (DWORD*)&iBytesWritten, NULL );
+#else
+ iBytesWritten = write(m_hComport, buffer, sizeof(buffer));
+ tcflush(m_hComport, TCIOFLUSH);
+ tcdrain(m_hComport); // flush buffer
+#endif
+
+ Unlock();
+
+ return (iBytesWritten == sizeof(buffer)) ? ATMO_TRUE : ATMO_FALSE;
+}
+
+/*
+ def boot_enter_application(addr)
+ $dev.write(addr.chr)
+ $dev.write("\x87")
+ $dev.write("\x00"*13)
+ $dev.flush
+ end
+*/
+ATMO_BOOL CFnordlichtConnection::boot_enter_application(unsigned char addr)
+{
+ if(m_hComport == INVALID_HANDLE_VALUE)
+ return ATMO_FALSE;
+
+ unsigned char buffer[15];
+ memset(&buffer, 0, sizeof(buffer)); // zero buffer
+ int iBytesWritten;
+
+ Lock();
+
+ buffer[0] = addr; // fnordlicht address (255 = broadcast)
+ buffer[1] = 0x87; // boot_ender_application command
+
+#if defined(WIN32)
+ // send to COM-Port
+ WriteFile( m_hComport, buffer, sizeof(buffer),
+ (DWORD*)&iBytesWritten, NULL );
+#else
+ iBytesWritten = write(m_hComport, buffer, sizeof(buffer));
+ tcflush(m_hComport, TCIOFLUSH);
+ tcdrain(m_hComport); // flush buffer
+#endif
+
+ Unlock();
+
+ return (iBytesWritten == sizeof(buffer)) ? ATMO_TRUE : ATMO_FALSE;
+}
+
+#if !defined(_ATMO_VLC_PLUGIN_)
+
+char *CFnordlichtConnection::getChannelName(int ch)
+{
+ char buf[60];
+ if( ch < 0 ) return NULL;
+ if( ch >= getAmountFnordlichter() ) return NULL;
+
+ sprintf(buf,"Number [%d]",ch);
+ return strdup(buf);
+ // sorry asprintf is not defined on Visual Studio :)
+ // return (asprintf(&ret, "Number [%d]", ch) != -1) ? ret : NULL;
+
+}
+
+ATMO_BOOL CFnordlichtConnection::ShowConfigDialog(HINSTANCE hInst, HWND parent,
+ CAtmoConfig *cfg)
+{
+ CFnordlichtConfigDialog *dlg = new CFnordlichtConfigDialog(hInst,
+ parent,
+ cfg);
+
+ INT_PTR result = dlg->ShowModal();
+
+ delete dlg;
+
+ if(result == IDOK)
+ return ATMO_TRUE;
+ else
+ return ATMO_FALSE;
+}
+
+#endif
+
--- /dev/null
+/*
+ * FnordlichtConnection.h: class to access a FnordlichtLight Hardware
+ * - the description could be found
+ * here: http://github.com/fd0/fnordlicht/raw/master/doc/PROTOCOL
+ *
+ * (C) Kai Lauterbach (klaute at gmail.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * $Id$
+ */
+#ifndef _FnordlichtConnection_h_
+#define _FnordlichtConnection_h_
+
+#include "AtmoDefs.h"
+#include "AtmoConnection.h"
+#include "AtmoConfig.h"
+
+#if defined(WIN32)
+# include <windows.h>
+#endif
+
+
+class CFnordlichtConnection : public CAtmoConnection
+{
+ private:
+ HANDLE m_hComport;
+
+ ATMO_BOOL sync(void);
+ ATMO_BOOL stop(unsigned char addr);
+ ATMO_BOOL reset(unsigned char addr);
+ ATMO_BOOL start_bootloader(unsigned char addr);
+ ATMO_BOOL boot_enter_application(unsigned char addr);
+
+#if defined(WIN32)
+ DWORD m_dwLastWin32Error;
+ public:
+ DWORD getLastError() { return m_dwLastWin32Error; }
+#endif
+
+ public:
+ CFnordlichtConnection (CAtmoConfig *cfg);
+ virtual ~CFnordlichtConnection (void);
+
+ virtual ATMO_BOOL OpenConnection();
+
+ virtual void CloseConnection();
+
+ virtual ATMO_BOOL isOpen(void);
+
+ virtual ATMO_BOOL SendData(pColorPacket data);
+
+ virtual ATMO_BOOL HardwareWhiteAdjust(int global_gamma,
+ int global_contrast,
+ int contrast_red,
+ int contrast_green,
+ int contrast_blue,
+ int gamma_red,
+ int gamma_green,
+ int gamma_blue,
+ ATMO_BOOL storeToEeprom);
+
+ virtual int getAmountFnordlichter();
+
+ virtual const char *getDevicePath() { return "fnordlicht"; }
+
+#if !defined(_ATMO_VLC_PLUGIN_)
+ virtual char *getChannelName(int ch);
+ virtual ATMO_BOOL ShowConfigDialog(HINSTANCE hInst, HWND parent,
+ CAtmoConfig *cfg);
+#endif
+
+ virtual ATMO_BOOL CreateDefaultMapping(CAtmoChannelAssignment *ca);
+};
+
+#endif
-This piece of software is based on the software and descriptions mentioned below -\r
-\r
-\r
-(re)Written by: Igor / Atmo (aka André Weber) - WeberAndre@gmx.de\r
- Matthiaz \r
- MacGyver2k\r
-\r
-if you need to contact one of us - come to www.vdr-portal.de \r
-\r
-http://www.vdr-portal.de/board/thread.php?threadid=59294 -- Description and Development of the Windows Software\r
-http://www.vdr-portal.de/board/thread.php?threadid=48574 -- Description and Development of the Hardware part\r
-\r
-=====================================================\r
-Info for Users on Vista or Windows 7 with active UAC!\r
-=====================================================\r
-for the first launch do it as Administrator with the following command line \r
-\r
-AtmoWinA.exe /register \r
-\r
-to create the required registry entries for the COM Objects, without\r
-these registry entries - the DirectShow Filter and also the VLC Plugin\r
-will not work.\r
-If anything went fine you should see the message "COM Server registered Ok!".\r
-\r
-See the file COPYING.txt for license information.\r
-\r
-\r
-VideoLAN / VLC\r
----------------\r
-\r
-In order to use this Programm with the VLC-Media-Player properly copy the "AtmoCtrlLib.dll" into the same Location where the vlc.exe is. E.G.: "D:\Programme\VLC". \r
-\r
-NEWER Versions of VideoLAN 1.1.x and higher, don't need a own copy of the "AtmoCtrlLib.dll" in the vlc.exe folder,\r
-if the complete filename of the AtmoWin*.exe is given. (Atmo Filter will try to load the DLL from there)\r
-\r
-Then open VLC and navigate to "Extras" / "Settings" or Press "Ctrl" + "p".\r
-Check that the radiobutton in the lower part of the dialogbox called "Show settings" -> "all" is checked.\r
-Now open the Register "Video" and click on "Filter". There you have to select the checkbox "AtmoLight-Filter".\r
-Afterwards you expand the Tree "Filter" in the Listbox on the left side. By selecting the entry "AtmoLight" you gain more settings.\r
-The most important are right these one at the beginning:\r
-\r
-VideoLAN 1.0.x \r
-==============\r
-"Use build in AtmoLight driver": \r
-Using this Property means VLC will control the Hardware with its built in driver. \r
-(no need for the extra AtmoWin software driver) \r
-\r
-VideoLAN 1.1.x \r
-==============\r
-You have the following choices for "Devicetype" instead of the old settings\r
-"AtmoWin Software" - is only available on Windows and works like the old way useing the external AtmoWin*.exe Software package, with the AtmoCtrlLib.dll.\r
-"Classic AtmoLight" - is the same as the former "use build in AtmoLight driver" \r
-"Quattro AtmoLight" - allows to use up to four serial connected class AtmoLight devices, as one logical device\r
-"DMX" - allows to control a simple serial DMX devices for AtmoLight effects\r
-"MoMoLight" - is a another kind of hardware supporting 2 oder 3 channels.\r
-(see bottom of this file - for more infos about the devices.)\r
-\r
-VideonLAN 1.0.x\r
-===============\r
-"Serial Device / Port":\r
-The COM-Port you are using for the hardware. E.G.: COM6 (This setting must be done if you are using the Property \r
-"use build in AtmoLight driver" )\r
-\r
-VideonLAN 1.1.x\r
-===============\r
-"Serial Device / Port":\r
-The COM-Port you are using for the hardware. E.G.: COM6 (This setting must be done if you are using a device\r
-other than "AtmoWin Software") \r
-in the case of the device "Quattro AtmoLight" you may specify up to four ports/devices seperated by\r
-, or ; for example if you are useing two physical devices write\r
-COM6;COM7 or on linux /dev/ttyUSB1;/dev/ttyUSB2\r
-\r
-VideoLAN 1.0.x\r
-==============\r
-"Filename of AtmoWinA.exe":\r
-The Path and the Name of the executable. E.G.:\r
-'D:\atmoWin_0.45\AtmoWinA.exe' (Using this setting expects that you have copied "AtmoCtrlLib.dll" to the Path where VLC.exe is like described before)\r
-\r
-VideoLAN 1.1.x\r
-==============\r
-"Filename of AtmoWinA.exe":\r
-The Path and the Name of the executable. E.G.:\r
-'D:\atmoWin_0.45\AtmoWinA.exe' \r
-in the same path where the .exe resides the "AtmoCtrlLib.dll" should be there. or you may need to place\r
-a copy of this ".dll" into the vlc.exe folder - like in VideoLAN 1.0.x\r
-\r
-Afterwards you should apply those settings by pressing the button "Save".\r
-\r
-\r
-\r
-\r
-VideoLAN 1.1.x - new options and settings\r
-=========================================\r
-Zone Layout for the build-in Atmo\r
-=================================\r
-This is the most important change I think - because the number of analyzed zones isn't\r
-longer fixed to 4 or 5 - it allows to define the physical layout of your lights arround\r
-the screen.\r
-"Number of zones on top" -- how many light sources are place on top of the screen\r
- (number of columns in which the screen should be tiled)\r
-\r
-"Number of zones on bottom" -- how many light sources are place on bottom of the screen\r
- (number of columns in which the screen should be tiled)\r
-\r
-"Zones on left / right side" -- how many light sources are place on right/left of the screen\r
- (number of rows in which the screen should be tiled)\r
- its assumed that the number on right and left is equal.\r
-\r
-"[] Calculate a average zone" -- define a color pair depending on the complete screen content\r
-\r
-This settings tiles the screen into a number of zones - which get analyzed by atmoLight to\r
-determine a most used color for these areas - each zone has a number starting from zero.\r
-The zones are usualy numbered in clock-wise order starting at the top/left of the screen.\r
-\r
-Example 1: classic Atmo with 4 channels\r
----------------------------------------\r
-"Number of zones on top" = 1\r
-"Number of zones on bottom" = 1\r
-"Zones on left / right side" = 1\r
-"[] Calculate a average zone" = false/0 not checked.\r
-\r
-will produce this zone layout\r
- ----------- \r
- | Zone 0 | \r
----------------------\r
-| | | | \r
-| Z | | Z | \r
-| o | | o |\r
-| n | | n |\r
-| e | | e | \r
-| | | | \r
-| 3 | | 1 | \r
----------------- ----\r
- | Zone 2 |\r
- -----------\r
-\r
-\r
-Example 2: classic Atmo with 4 channels\r
----------------------------------------\r
-"Number of zones on top" = 2\r
-"Number of zones on bottom" = 0\r
-"Zones on left / right side" = 1\r
-"[] Calculate a average zone" = false/0 not checked.\r
-\r
- ----------- -----------\r
- | Zone 0 | | Zone 1 |\r
----------------------------------\r
-| | | | \r
-| Z | | Z | \r
-| o | | o |\r
-| n | | n |\r
-| e | | e | \r
-| | | | \r
-| 3 | | 2 | \r
------ -----\r
-\r
-Example 3: classic Atmo with 4 channels\r
----------------------------------------\r
-"Number of zones on top" = 1\r
-"Number of zones on bottom" = 0\r
-"Zones on left / right side" = 1\r
-"[X] Calculate a average zone" = true/1 checked.\r
- \r
- ----------- \r
- | Zone 0 | \r
----------------------\r
-| | -------- | | \r
-| Z | | Z | | Z | \r
-| o | | o | | o |\r
-| n | | n | | n |\r
-| e | | e | | e | \r
-| | | 3 | | | \r
-| 2 | -------- | 1 | \r
------ -----\r
-Zone 3 - usualy calcuates the most used color of the full screen / picture / frame\r
-not only at the border of the picture.\r
-\r
-"The average zone" is allways the last in the sequence of numbers.\r
-\r
-\r
- \r
-the weightning gradients for these zones are auto calculated\r
-from 100% .. 0% starting from the edge.\r
-\r
-thats also the cause why the parameters Channel assignment changed,\r
-the classic comboboxes are still there for devices with 4 channels ot less,\r
-but for newer devices the "Channel / Zone assignment" should be used which\r
-is defined by a , or ; separated list of "AtmoLight channel numbers" if you\r
-want to hide a calcuated zone from output - you can assign channel -1 to\r
-do this. \r
-for classic AtmoLight with "Example 1" you may write this:\r
--1;3;2;1;0 \r
-AtmoLight Channel 0: gets no zone assigned (-1)\r
-AtmoLight Channel 1: gets zone 3 (left)\r
-AtmoLight Channel 2: gets zone 2 (bottom)\r
-AtmoLight Channel 3: gets zone 1 (right)\r
-AtmoLight Channel 4: gets zone 0 (top)\r
-\r
-\r
-Also the settings for Gradient images change for the new devices, its no longer\r
-sufficient to speficy only 5 image name - because the number of zones is no longer\r
-fixed to five.\r
-So its prefered to set a path ("Gradient Bitmap searchpath"), where files \r
-like "zone_0.bmp" "zone_1.bmp" etc. exists. (with the same rules as defined for \r
-the old zone bitmaps.)\r
---> I think in most cases its no longer required to use this option,\r
-to change the zone layout - for most cases its sufficient to change \r
-"Zone Layout for the build-in Atmo" to get the same effect?\r
-\r
-Live Set of parameters for Buildin AtmoLight\r
-============================================\r
-durring playback with the buildin driver you can now change some settings\r
-of the filter without stopping / starting your movie - just open the\r
-"extras" --> "Effects and Filters" --> [Video effects] --> [AtmoLight]\r
-- move the sliders or change the calcuation mode, or enable/disable\r
-the debug grid - just in time.\r
-\r
-\r
-new Debugging Option\r
-====================\r
-[] Mark analyzed pixels - puts a grid of the used pixels on each frame\r
-to see from which locations/positions the colors are extracted.\r
-\r
-DMX Options\r
------------\r
-like the group says only for the DMX device\r
-"Count of AtmoLight Channels" - defines how many RGB Channels should be simulated\r
-with this DMX device (each RGB channel needs three DMX channels!)\r
-\r
-"DMX adress for each channel" - defines the DMX Startadress for each AtmoLight\r
-channel as "," or ";" separated list. (starting with 0 up to 252) it is assumed\r
-that the f.e. of the DMX-AtmoLight channel starts at DMX-Channel 5 - that\r
-DMX-Channel 5: is red\r
-DMX-Channel 6: is green\r
-DMX-Channel 7: is blue!\r
-\r
-MoMoLight options\r
------------------\r
-"Count of channels" - defines the devicetype and serial protocol \r
-3: - means 3 channels hardware\r
-4: - means 4 channels hardware\r
-(its required to set the correct number of channels to get this device working,\r
- because the serial protocol isn't the same!)\r
-\r
-\r
-\r
-VideoLan Options and Devices - the buildin version of AtmoLight supports a subset of the\r
-devices that AtmoWin supports.\r
-\r
-- AtmoWin Software - means do not use the VLC buildin video processing - just forward\r
- the basic preprocessed data to the launched AtmoWinA.exe controlling your hardware.\r
-\r
-- Classic AtmoLight - means the classic hardware from www.vdr-portal.de - with up to 5 channels. \r
-\r
-- Quattro AtmoLight - is nothing else as that you have connected up to 4 "classic AtmoLight" devices\r
- to your computer creating a up 16 channel Atmo Light - each devices needs its own serial port.\r
- you have to write the ports seperated by , or ; to [Serial Port/device] f.e. COM3,COM4,COM5 or on \r
- Linux /dev/ttyUSB01,/dev/ttyUSB02,/dev/ttyUSB03\r
-\r
-- DMX - stands for a simple DMX controller which can control up to 255 DMX devices (lights)\r
- - f.e. you may have a look here: \r
- * http://www.dzionsko.de/elektronic/index.htm\r
- * http://www.ulrichradig.de/ (search for dmx on his page)\r
- \r
-- MoMoLight - is a serial device, with 3 or 4 channels - doing nearly the same like\r
- Classic AtmoLight - just another protocol to control the hardware.\r
- http://lx.divxstation.com/article.asp?aId=151\r
- http://www.the-boss.dk/pages/momolight.htm\r
-\r
-\r
-\r
-\r
-\r
-Original Readme - of the Linux Version - from where some code was used\r
-to do the color calculations ...\r
-\r
-######################################################################\r
-Original Readme and Authors of the Linux VDR Plugin!\r
-######################################################################\r
-\r
-Written by: Eike Edener <vdr@edener.de>\r
-Project's homepage: www.edener.de\r
-Latest version available at: www.edener.de\r
-See the file COPYING for license information.\r
-----------------------------------------------------------------------\r
-\r
-for detailed informations visit the VDR-Wiki:\r
-http://www.vdr-wiki.de/wiki/index.php/Atmo-plugin\r
-\r
-Development:\r
-http://www.vdr-portal.de/board/thread.php?threadid=48574\r
-\r
-Known bugs:\r
-n/a\r
-\r
-----------------------------------------------------------------------\r
+This piece of software is based on the software and descriptions mentioned below -
+
+
+(re)Written by: Igor / Atmo (aka André Weber) - WeberAndre@gmx.de
+ Matthiaz
+ MacGyver2k
+
+if you need to contact one of us - come to www.vdr-portal.de
+
+http://www.vdr-portal.de/board/thread.php?threadid=59294 -- Description and Development of the Windows Software
+http://www.vdr-portal.de/board/thread.php?threadid=48574 -- Description and Development of the Hardware part
+
+=====================================================
+Info for Users on Vista or Windows 7 with active UAC!
+=====================================================
+for the first launch do it as Administrator with the following command line
+
+AtmoWinA.exe /register
+
+to create the required registry entries for the COM Objects, without
+these registry entries - the DirectShow Filter and also the VLC Plugin
+will not work.
+If anything went fine you should see the message "COM Server registered Ok!".
+
+See the file COPYING.txt for license information.
+
+
+VideoLAN / VLC
+---------------
+
+In order to use this Programm with the VLC-Media-Player properly copy the "AtmoCtrlLib.dll" into the same Location where the vlc.exe is. E.G.: "D:\Programme\VLC".
+
+NEWER Versions of VideoLAN 1.1.x and higher, don't need a own copy of the "AtmoCtrlLib.dll" in the vlc.exe folder,
+if the complete filename of the AtmoWin*.exe is given. (Atmo Filter will try to load the DLL from there)
+
+Then open VLC and navigate to "Extras" / "Settings" or Press "Ctrl" + "p".
+Check that the radiobutton in the lower part of the dialogbox called "Show settings" -> "all" is checked.
+Now open the Register "Video" and click on "Filter". There you have to select the checkbox "AtmoLight-Filter".
+Afterwards you expand the Tree "Filter" in the Listbox on the left side. By selecting the entry "AtmoLight" you gain more settings.
+The most important are right these one at the beginning:
+
+VideoLAN 1.0.x
+==============
+"Use build in AtmoLight driver":
+Using this Property means VLC will control the Hardware with its built in driver.
+(no need for the extra AtmoWin software driver)
+
+VideoLAN 1.1.x
+==============
+You have the following choices for "Devicetype" instead of the old settings
+"AtmoWin Software" - is only available on Windows and works like the old way useing the external AtmoWin*.exe Software package, with the AtmoCtrlLib.dll.
+"Classic AtmoLight" - is the same as the former "use build in AtmoLight driver"
+"Quattro AtmoLight" - allows to use up to four serial connected class AtmoLight devices, as one logical device
+"DMX" - allows to control a simple serial DMX devices for AtmoLight effects
+"MoMoLight" - is a another kind of hardware supporting 2 oder 3 channels.
+(see bottom of this file - for more infos about the devices.)
+
+VideonLAN 1.0.x
+===============
+"Serial Device / Port":
+The COM-Port you are using for the hardware. E.G.: COM6 (This setting must be done if you are using the Property
+"use build in AtmoLight driver" )
+
+VideonLAN 1.1.x
+===============
+"Serial Device / Port":
+The COM-Port you are using for the hardware. E.G.: COM6 (This setting must be done if you are using a device
+other than "AtmoWin Software")
+in the case of the device "Quattro AtmoLight" you may specify up to four ports/devices seperated by
+, or ; for example if you are useing two physical devices write
+COM6;COM7 or on linux /dev/ttyUSB1;/dev/ttyUSB2
+
+VideoLAN 1.0.x
+==============
+"Filename of AtmoWinA.exe":
+The Path and the Name of the executable. E.G.:
+'D:\atmoWin_0.45\AtmoWinA.exe' (Using this setting expects that you have copied "AtmoCtrlLib.dll" to the Path where VLC.exe is like described before)
+
+VideoLAN 1.1.x
+==============
+"Filename of AtmoWinA.exe":
+The Path and the Name of the executable. E.G.:
+'D:\atmoWin_0.45\AtmoWinA.exe'
+in the same path where the .exe resides the "AtmoCtrlLib.dll" should be there. or you may need to place
+a copy of this ".dll" into the vlc.exe folder - like in VideoLAN 1.0.x
+
+Afterwards you should apply those settings by pressing the button "Save".
+
+
+
+
+VideoLAN 1.1.x - new options and settings
+=========================================
+Zone Layout for the build-in Atmo
+=================================
+This is the most important change I think - because the number of analyzed zones isn't
+longer fixed to 4 or 5 - it allows to define the physical layout of your lights arround
+the screen.
+"Number of zones on top" -- how many light sources are place on top of the screen
+ (number of columns in which the screen should be tiled)
+
+"Number of zones on bottom" -- how many light sources are place on bottom of the screen
+ (number of columns in which the screen should be tiled)
+
+"Zones on left / right side" -- how many light sources are place on right/left of the screen
+ (number of rows in which the screen should be tiled)
+ its assumed that the number on right and left is equal.
+
+"[] Calculate a average zone" -- define a color pair depending on the complete screen content
+
+This settings tiles the screen into a number of zones - which get analyzed by atmoLight to
+determine a most used color for these areas - each zone has a number starting from zero.
+The zones are usualy numbered in clock-wise order starting at the top/left of the screen.
+
+Example 1: classic Atmo with 4 channels
+---------------------------------------
+"Number of zones on top" = 1
+"Number of zones on bottom" = 1
+"Zones on left / right side" = 1
+"[] Calculate a average zone" = false/0 not checked.
+
+will produce this zone layout
+ -----------
+ | Zone 0 |
+---------------------
+| | | |
+| Z | | Z |
+| o | | o |
+| n | | n |
+| e | | e |
+| | | |
+| 3 | | 1 |
+---------------- ----
+ | Zone 2 |
+ -----------
+
+
+Example 2: classic Atmo with 4 channels
+---------------------------------------
+"Number of zones on top" = 2
+"Number of zones on bottom" = 0
+"Zones on left / right side" = 1
+"[] Calculate a average zone" = false/0 not checked.
+
+ ----------- -----------
+ | Zone 0 | | Zone 1 |
+---------------------------------
+| | | |
+| Z | | Z |
+| o | | o |
+| n | | n |
+| e | | e |
+| | | |
+| 3 | | 2 |
+----- -----
+
+Example 3: classic Atmo with 4 channels
+---------------------------------------
+"Number of zones on top" = 1
+"Number of zones on bottom" = 0
+"Zones on left / right side" = 1
+"[X] Calculate a average zone" = true/1 checked.
+
+ -----------
+ | Zone 0 |
+---------------------
+| | -------- | |
+| Z | | Z | | Z |
+| o | | o | | o |
+| n | | n | | n |
+| e | | e | | e |
+| | | 3 | | |
+| 2 | -------- | 1 |
+----- -----
+Zone 3 - usualy calcuates the most used color of the full screen / picture / frame
+not only at the border of the picture.
+
+"The average zone" is allways the last in the sequence of numbers.
+
+
+
+the weightning gradients for these zones are auto calculated
+from 100% .. 0% starting from the edge.
+
+thats also the cause why the parameters Channel assignment changed,
+the classic comboboxes are still there for devices with 4 channels ot less,
+but for newer devices the "Channel / Zone assignment" should be used which
+is defined by a , or ; separated list of "AtmoLight channel numbers" if you
+want to hide a calcuated zone from output - you can assign channel -1 to
+do this.
+for classic AtmoLight with "Example 1" you may write this:
+-1;3;2;1;0
+AtmoLight Channel 0: gets no zone assigned (-1)
+AtmoLight Channel 1: gets zone 3 (left)
+AtmoLight Channel 2: gets zone 2 (bottom)
+AtmoLight Channel 3: gets zone 1 (right)
+AtmoLight Channel 4: gets zone 0 (top)
+
+
+Also the settings for Gradient images change for the new devices, its no longer
+sufficient to speficy only 5 image name - because the number of zones is no longer
+fixed to five.
+So its prefered to set a path ("Gradient Bitmap searchpath"), where files
+like "zone_0.bmp" "zone_1.bmp" etc. exists. (with the same rules as defined for
+the old zone bitmaps.)
+--> I think in most cases its no longer required to use this option,
+to change the zone layout - for most cases its sufficient to change
+"Zone Layout for the build-in Atmo" to get the same effect?
+
+Live Set of parameters for Buildin AtmoLight
+============================================
+durring playback with the buildin driver you can now change some settings
+of the filter without stopping / starting your movie - just open the
+"extras" --> "Effects and Filters" --> [Video effects] --> [AtmoLight]
+- move the sliders or change the calcuation mode, or enable/disable
+the debug grid - just in time.
+
+
+new Debugging Option
+====================
+[] Mark analyzed pixels - puts a grid of the used pixels on each frame
+to see from which locations/positions the colors are extracted.
+
+DMX Options
+-----------
+like the group says only for the DMX device
+"Count of AtmoLight Channels" - defines how many RGB Channels should be simulated
+with this DMX device (each RGB channel needs three DMX channels!)
+
+"DMX adress for each channel" - defines the DMX Startadress for each AtmoLight
+channel as "," or ";" separated list. (starting with 0 up to 252) it is assumed
+that the f.e. of the DMX-AtmoLight channel starts at DMX-Channel 5 - that
+DMX-Channel 5: is red
+DMX-Channel 6: is green
+DMX-Channel 7: is blue!
+
+MoMoLight options
+-----------------
+"Count of channels" - defines the devicetype and serial protocol
+3: - means 3 channels hardware
+4: - means 4 channels hardware
+(its required to set the correct number of channels to get this device working,
+ because the serial protocol isn't the same!)
+
+
+
+VideoLan Options and Devices - the buildin version of AtmoLight supports a subset of the
+devices that AtmoWin supports.
+
+- AtmoWin Software - means do not use the VLC buildin video processing - just forward
+ the basic preprocessed data to the launched AtmoWinA.exe controlling your hardware.
+
+- Classic AtmoLight - means the classic hardware from www.vdr-portal.de - with up to 5 channels.
+
+- Quattro AtmoLight - is nothing else as that you have connected up to 4 "classic AtmoLight" devices
+ to your computer creating a up 16 channel Atmo Light - each devices needs its own serial port.
+ you have to write the ports seperated by , or ; to [Serial Port/device] f.e. COM3,COM4,COM5 or on
+ Linux /dev/ttyUSB01,/dev/ttyUSB02,/dev/ttyUSB03
+
+- DMX - stands for a simple DMX controller which can control up to 255 DMX devices (lights)
+ - f.e. you may have a look here:
+ * http://www.dzionsko.de/elektronic/index.htm
+ * http://www.ulrichradig.de/ (search for dmx on his page)
+
+- MoMoLight - is a serial device, with 3 or 4 channels - doing nearly the same like
+ Classic AtmoLight - just another protocol to control the hardware.
+ http://lx.divxstation.com/article.asp?aId=151
+ http://www.the-boss.dk/pages/momolight.htm
+
+- Fnordlicht - is a serial device with up to four channels
+ http://github.com/fd0/fnordlicht/raw/master/doc/PROTOCOL
+ http://github.com/fd0/fnordlicht/
+
+
+
+
+Original Readme - of the Linux Version - from where some code was used
+to do the color calculations ...
+
+######################################################################
+Original Readme and Authors of the Linux VDR Plugin!
+######################################################################
+
+Written by: Eike Edener <vdr@edener.de>
+Project's homepage: www.edener.de
+Latest version available at: www.edener.de
+See the file COPYING for license information.
+----------------------------------------------------------------------
+
+for detailed informations visit the VDR-Wiki:
+http://www.vdr-wiki.de/wiki/index.php/Atmo-plugin
+
+Development:
+http://www.vdr-portal.de/board/thread.php?threadid=48574
+
+Known bugs:
+n/a
+
+----------------------------------------------------------------------
1, /* AtmoLight classic */
2, /* Quattro AtmoLight */
3, /* DMX Device */
- 4 /* MoMoLight device */
+ 4, /* MoMoLight device */
+ 5 /* fnordlicht */
};
static const char *const ppsz_device_type_descriptions[] = {
#if defined( WIN32 )
N_("Classic AtmoLight"),
N_("Quattro AtmoLight"),
N_("DMX"),
- N_("MoMoLight")
+ N_("MoMoLight"),
+ N_("fnordlicht")
};
#define DMX_CHANNELS_TEXT N_("Count of AtmoLight channels")
#define MOMO_CHANNELS_LONGTEXT N_("Depending on your MoMoLight hardware " \
"choose 3 or 4 channels")
+#define FNORDLICHT_AMOUNT_TEXT N_("Count of fnordlicht's")
+#define FNORDLICHT_AMOUNT_LONGTEXT N_("Depending on the amount your " \
+ "fnordlicht hardware " \
+ "choose 1 to 4 channels")
+
#if defined( WIN32 )
# define DEFAULT_DEVICE 0
#else
add_file(CFG_PREFIX "atmowinexe", NULL, NULL,
ATMOWINEXE_TEXT, ATMOWINEXE_LONGTEXT, false )
#else
-add_string(CFG_PREFIX "serialdev", "/dev/ttyS01", NULL,
+add_string(CFG_PREFIX "serialdev", "/dev/ttyUSB0", NULL,
SERIALDEV_TEXT, SERIALDEV_LONGTEXT, false )
#endif
add_integer_with_range(CFG_PREFIX "momo-channels", 3, 3, 4, NULL,
MOMO_CHANNELS_TEXT, MOMO_CHANNELS_LONGTEXT, false)
+/* 2,2,4 means 2 is the default value, 1 minimum amount,
+ 4 maximum amount
+*/
+set_section( N_("fnordlicht options" ), 0 )
+add_integer_with_range(CFG_PREFIX "fnordlicht-amount", 2, 1, 4, NULL,
+ FNORDLICHT_AMOUNT_TEXT,
+ FNORDLICHT_AMOUNT_LONGTEXT, false)
/*
"dmx-channels",
"dmx-chbase",
"momo-channels",
+ "fnordlicht-amount",
#if defined(WIN32 )
"atmowinexe",
p_atmo_config->setMoMo_Channels(
var_CreateGetIntegerCommand( p_filter, CFG_PREFIX "momo-channels")
);
+
+ /*
+ fnordlicht options
+ */
+ p_atmo_config->setFnordlicht_Amount(
+ var_CreateGetIntegerCommand( p_filter, CFG_PREFIX "fnordlicht-amount")
+ );
+
}
/* importing all required functions I hope*/
p_sys->pf_ctrl_atmo_initialize =
- (int32_t (*)(void))GetProcAddress(p_sys->h_AtmoCtrl,"AtmoInitialize");
+ (int32_t (*)(void))GetProcAddress( p_sys->h_AtmoCtrl,
+ "AtmoInitialize");
if(!p_sys->pf_ctrl_atmo_initialize)
msg_Err( p_filter, "export AtmoInitialize missing.");
p_sys->pf_ctrl_atmo_finalize =
- (void (*)(int32_t))GetProcAddress(p_sys->h_AtmoCtrl,"AtmoFinalize");
+ (void (*)(int32_t))GetProcAddress( p_sys->h_AtmoCtrl,
+ "AtmoFinalize");
if(!p_sys->pf_ctrl_atmo_finalize)
msg_Err( p_filter, "export AtmoFinalize missing.");
p_sys->pf_ctrl_atmo_switch_effect =
- (int32_t(*)(int32_t))GetProcAddress(p_sys->h_AtmoCtrl,"AtmoSwitchEffect");
+ (int32_t(*)(int32_t))GetProcAddress( p_sys->h_AtmoCtrl,
+ "AtmoSwitchEffect" );
if(!p_sys->pf_ctrl_atmo_switch_effect)
msg_Err( p_filter, "export AtmoSwitchEffect missing.");
p_sys->pf_ctrl_atmo_set_live_source =
- (int32_t(*)(int32_t))GetProcAddress(p_sys->h_AtmoCtrl,"AtmoSetLiveSource");
+ (int32_t(*)(int32_t))GetProcAddress( p_sys->h_AtmoCtrl,
+ "AtmoSetLiveSource" );
if(!p_sys->pf_ctrl_atmo_set_live_source)
msg_Err( p_filter, "export AtmoSetLiveSource missing.");
p_sys->pf_ctrl_atmo_create_transfer_buffers =
- (void (*)(int32_t, int32_t, int32_t , int32_t))GetProcAddress(p_sys->h_AtmoCtrl,"AtmoCreateTransferBuffers");
+ (void (*)(int32_t, int32_t, int32_t , int32_t))
+ GetProcAddress( p_sys->h_AtmoCtrl,
+ "AtmoCreateTransferBuffers" );
if(!p_sys->pf_ctrl_atmo_create_transfer_buffers)
msg_Err( p_filter, "export AtmoCreateTransferBuffers missing.");
p_sys->pf_ctrl_atmo_lock_transfer_buffer=
- (uint8_t*(*) (void))GetProcAddress(p_sys->h_AtmoCtrl,"AtmoLockTransferBuffer");
+ (uint8_t*(*) (void))GetProcAddress( p_sys->h_AtmoCtrl,
+ "AtmoLockTransferBuffer");
if(!p_sys->pf_ctrl_atmo_lock_transfer_buffer)
msg_Err( p_filter, "export AtmoLockTransferBuffer missing.");
p_sys->pf_ctrl_atmo_send_pixel_data =
- (void (*)(void))GetProcAddress(p_sys->h_AtmoCtrl,"AtmoSendPixelData");
+ (void (*)(void))GetProcAddress( p_sys->h_AtmoCtrl,
+ "AtmoSendPixelData");
if(!p_sys->pf_ctrl_atmo_send_pixel_data)
msg_Err( p_filter, "export AtmoSendPixelData missing.");
p_sys->pf_ctrl_atmo_get_image_size =
- (void (*)(int32_t*,int32_t*))GetProcAddress(p_sys->h_AtmoCtrl,"AtmoWinGetImageSize");
+ (void (*)(int32_t*,int32_t*))GetProcAddress( p_sys->h_AtmoCtrl,
+ "AtmoWinGetImageSize");
if(!p_sys->pf_ctrl_atmo_get_image_size)
msg_Err( p_filter, "export AtmoWinGetImageSize missing.");
} else {
/* the DLL is missing try internal filter ...*/
- msg_Warn( p_filter, "AtmoCtrlLib.dll missing fallback to internal atmo classic driver");
+ msg_Warn( p_filter,
+ "AtmoCtrlLib.dll missing fallback to internal atmo classic driver" );
p_sys->i_device_type = 1;
}
}
p_sys->p_atmo_config->setConnectionType( actMoMoLight );
break;
+ case 5:
+ p_sys->p_atmo_config->setConnectionType( actFnordlicht );
+ break;
+
default:
msg_Warn( p_filter, "invalid device type %d found",
p_sys->i_device_type );
}
}
- msg_Dbg( p_filter, "AtmoFrame %u Time: %d ms", p_sys->ui_frame_counter, mdate() / 1000);
+ msg_Dbg( p_filter, "AtmoFrame %u Time: %d ms", p_sys->ui_frame_counter,
+ mdate() / 1000);
p_sys->ui_frame_counter++;
#endif
);
if( !strcmp( psz_var, CFG_PREFIX "filtermode" ))
- p_atmo_config->setLiveViewFilterMode( (AtmoFilterMode)newval.i_int);
+ p_atmo_config->setLiveViewFilterMode( (AtmoFilterMode)newval.i_int );
else if( !strcmp( psz_var, CFG_PREFIX "percentnew" ))
p_atmo_config->setLiveViewFilter_PercentNew( newval.i_int );
i_crop_bottom = strtol( psz_end, &psz_end, 10 );
if( *psz_end != '\0' ) return;
- i_width = fmt_render.i_visible_width - i_crop_left - i_crop_right;
+ i_width = fmt_render.i_visible_width -
+ i_crop_left -
+ i_crop_right;
i_visible_width = i_width;
- i_height = fmt_render.i_visible_height - i_crop_top - i_crop_bottom;
+ i_height = fmt_render.i_visible_height -
+ i_crop_top -
+ i_crop_bottom;
i_visible_height = i_height;
i_x_offset = i_crop_left;