+++ /dev/null
-/* $XConsortium: spdo_prv.h,v 1.4 94/02/10 11:06:01 gildea Exp $ */
-
-/*
-
-Copyright 1989-1991, Bitstream Inc., Cambridge, MA.
-You are hereby granted permission under all Bitstream propriety rights to
-use, copy, modify, sublicense, sell, and redistribute the Bitstream Speedo
-software and the Bitstream Charter outline font for any purpose and without
-restrictions; provided, that this notice is left intact on all copies of such
-software or font and that Bitstream's trademark is acknowledged as shown below
-on all unmodified copies of such font.
-
-BITSTREAM CHARTER is a registered trademark of Bitstream Inc.
-
-
-BITSTREAM INC. DISCLAIMS ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
-WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-PARTICULAR PURPOSE. BITSTREAM SHALL NOT BE LIABLE FOR ANY DIRECT OR INDIRECT
-DAMAGES, INCLUDING BUT NOT LIMITED TO LOST PROFITS, LOST DATA, OR ANY OTHER
-INCIDENTAL OR CONSEQUENTIAL DAMAGES, ARISING OUT OF OR IN ANY WAY CONNECTED
-WITH THE SPEEDO SOFTWARE OR THE BITSTREAM CHARTER OUTLINE FONT.
-
-*/
-
-
-
-/***************************** S P D O _ P R V . H *******************************/
-
-#include "speedo.h" /* include public definitions */
-
-/***** CONFIGURATION DEFINITIONS *****/
-
-
-#ifndef INCL_PLAID_OUT
-#define INCL_PLAID_OUT 0 /* 1 to include plaid data monitoring */
-#endif /* 0 to omit plaid data monitoring */
-
-
-/***** PRIVATE FONT HEADER OFFSET CONSTANTS *****/
-#define FH_ORUMX 0 /* U Max ORU value 2 bytes */
-#define FH_PIXMX 2 /* U Max Pixel value 2 bytes */
-#define FH_CUSNR 4 /* U Customer Number 2 bytes */
-#define FH_OFFCD 6 /* E Offset to Char Directory 3 bytes */
-#define FH_OFCNS 9 /* E Offset to Constraint Data 3 bytes */
-#define FH_OFFTK 12 /* E Offset to Track Kerning 3 bytes */
-#define FH_OFFPK 15 /* E Offset to Pair Kerning 3 bytes */
-#define FH_OCHRD 18 /* E Offset to Character Data 3 bytes */
-#define FH_NBYTE 21 /* E Number of Bytes in File 3 bytes */
-
-
-/***** MODE FLAGS CONSTANTS *****/
-#define CURVES_OUT 0X0008 /* Output module accepts curves */
-#define BOGUS_MODE 0X0010 /* Linear scaling mode */
-#define CONSTR_OFF 0X0020 /* Inhibit constraint table */
-#define IMPORT_WIDTHS 0X0040 /* Imported width mode */
-#define SQUEEZE_LEFT 0X0100 /* Squeeze left mode */
-#define SQUEEZE_RIGHT 0X0200 /* Squeeze right mode */
-#define SQUEEZE_TOP 0X0400 /* Squeeze top mode */
-#define SQUEEZE_BOTTOM 0X0800 /* Squeeze bottom mode */
-#define CLIP_LEFT 0X1000 /* Clip left mode */
-#define CLIP_RIGHT 0X2000 /* Clip right mode */
-#define CLIP_TOP 0X4000 /* Clip top mode */
-#define CLIP_BOTTOM 0X8000 /* Clip bottom mode */
-
-
-/***** MACRO DEFINITIONS *****/
-
-#define SQUEEZE_MULT(A,B) (((fix31)A * (fix31)B) / (1 << 16))
-
-#define NEXT_BYTE(A) (*(A)++)
-
-#define NEXT_WORD(A) \
- ((fix15)(sp_globals.key32 ^ ((A) += 2, \
- ((fix15)((A)[-1]) << 8) | (fix15)((A)[-2]) | \
- ((A)[-1] & 0x80? ~0xFFFF : 0))))
-
-#if INCL_EXT /* Extended fonts supported? */
-
-#define NEXT_BYTES(A, B) \
- (((B = (ufix16)(*(A)++) ^ sp_globals.key7) >= 248)? \
- ((ufix16)(B & 0x07) << 8) + ((*(A)++) ^ sp_globals.key8) + 248: \
- B)
-
-#else /* Compact fonts only supported? */
-
-#define NEXT_BYTES(A, B) ((*(A)++) ^ sp_globals.key7)
-
-#endif
-
-
-#define NEXT_BYTE_U(A) (*(A)++)
-
-#define NEXT_WORD_U(A, B) \
- (fix15)(B = (*(A)++) << 8, (fix15)(*(A)++) + B)
-
-#define NEXT_CHNDX(A, B) \
- ((B)? (ufix16)NEXT_WORD(A): (ufix16)NEXT_BYTE(A))
-
-/* Multiply (fix15)X by (fix15)Y to produce (fix31)product */
-#define MULT16(X, Y) \
- ((fix31)X * (fix31)Y)
-
-/* Multiply (fix15)X by (fix15)MULT, add (fix31)OFFSET,
- * shift right SHIFT bits to produce (fix15)result */
-#define TRANS(X, MULT, OFFSET, SHIFT) \
- ((fix15)((((fix31)X * (fix31)MULT) + OFFSET) / (1 << SHIFT)))
-
-/******************************************************************************
- *
- * the following block of definitions redefines every function
- * reference to be prefixed with an "sp_". In addition, if this
- * is a reentrant version, the parameter sp_globals will be added
- * as the first parameter.
- *
- *****************************************************************************/
-
-#if STATIC_ALLOC || DYNAMIC_ALLOC
-
-#define GDECL
-
-#define get_char_id(char_index) sp_get_char_id(char_index)
-#define get_char_width(char_index) sp_get_char_width(char_index)
-#define get_track_kern(track,point_size) sp_get_track_kern(track,point_size)
-#define get_pair_kern(char_index1,char_index2) sp_get_pair_kern(char_index1,char_index2)
-#define get_char_bbox(char_index,bbox) sp_get_char_bbox(char_index,bbox)
-#define make_char(char_index) sp_make_char(char_index)
-#if INCL_ISW
-#define compute_isw_scale() sp_compute_isw_scale()
-#define do_make_char(char_index) sp_do_make_char(char_index)
-#define make_char_isw(char_index,imported_width) sp_make_char_isw(char_index,imported_width)
-#define reset_xmax(xmax) sp_reset_xmax(xmax)
-#endif
-#if INCL_ISW || INCL_SQUEEZING
-#define preview_bounding_box(pointer,format) sp_preview_bounding_box(pointer,format)
-#endif
-#define make_simp_char(pointer,format) sp_make_simp_char(pointer,format)
-#define make_comp_char(pointer) sp_make_comp_char(pointer)
-#define get_char_org(char_index,top_level) sp_get_char_org(char_index,top_level)
-#define get_posn_arg(ppointer,format) sp_get_posn_arg(ppointer,format)
-#define get_scale_arg(ppointer,format) sp_get_scale_arg(ppointer,format)
-#define read_bbox(ppointer,pPmin,pPmax,set_flag) sp_read_bbox(ppointer,pPmin,pPmax,set_flag)
-#define proc_outl_data(pointer) sp_proc_outl_data(pointer)
-#define split_curve(P1,P2,P3,depth) sp_split_curve(P1,P2,P3,depth)
-#define get_args(ppointer,format,pP) sp_get_args(ppointer,format,pP)
-
-#define init_black(specsarg) sp_init_black(specsarg)
-#define begin_char_black(Psw,Pmin,Pmax) sp_begin_char_black(Psw,Pmin,Pmax)
-#define begin_contour_black(P1,outside) sp_begin_contour_black(P1,outside)
-#define line_black(P1) sp_line_black(P1)
-#define end_char_black() sp_end_char_black()
-#define add_intercept_black(y,x) sp_add_intercept_black(y,x)
-#define proc_intercepts_black() sp_proc_intercepts_black()
-
-#define init_screen(specsarg) sp_init_screen(specsarg)
-#define begin_char_screen(Psw,Pmin,Pmax) sp_begin_char_screen(Psw,Pmin,Pmax)
-#define begin_contour_screen(P1,outside) sp_begin_contour_screen(P1,outside)
-#define curve_screen(P1,P2,P3,depth) sp_curve_screen(P1,P2,P3,depth)
-#define scan_curve_screen(X0,Y0,X1,Y1,X2,Y2,X3,Y3) sp_scan_curve_screen(X0,Y0,X1,Y1,X2,Y2,X3,Y3)
-#define vert_line_screen(x,y1,y2) sp_vert_line_screen(x,y1,y2)
-#define line_screen(P1) sp_line_screen(P1)
-#define end_contour_screen() sp_end_contour_screen()
-#define end_char_screen() sp_end_char_screen()
-#define add_intercept_screen(y,x) sp_add_intercept_screen(y,x)
-#define proc_intercepts_screen() sp_proc_intercepts_screen()
-
-#define init_outline(specsarg) sp_init_outline(specsarg)
-#define begin_char_outline(Psw,Pmin,Pmax) sp_begin_char_outline(Psw,Pmin,Pmax)
-#define begin_sub_char_outline(Psw,Pmin,Pmax) sp_begin_sub_char_outline(Psw,Pmin,Pmax)
-#define begin_contour_outline(P1,outside) sp_begin_contour_outline(P1,outside)
-#define curve_outline(P1,P2,P3,depth) sp_curve_outline(P1,P2,P3,depth)
-#define line_outline(P1) sp_line_outline(P1)
-#define end_contour_outline() sp_end_contour_outline()
-#define end_sub_char_outline() sp_end_sub_char_outline()
-#define end_char_outline() sp_end_char_outline()
-
-#define init_2d(specsarg) sp_init_2d(specsarg)
-#define begin_char_2d(Psw, Pmin, Pmax) sp_begin_char_2d(Psw, Pmin, Pmax)
-#define begin_contour_2d(P1, outside) sp_begin_contour_2d(P1, outside)
-#define line_2d(P1) sp_line_2d(P1)
-#define end_char_2d() sp_end_char_2d()
-#define add_intercept_2d(y, x) sp_add_intercept_2d(y, x)
-#define proc_intercepts_2d() sp_proc_intercepts_2d()
-#define draw_vector_to_2d(x0, y0, x1, y1, band) sp_draw_vector_to_2d(x0, y0, x1, y1, band)
-
-#define init_char_out(Psw,Pmin,Pmax) sp_init_char_out(Psw,Pmin,Pmax)
-#define begin_sub_char_out(Psw,Pmin,Pmax) sp_begin_sub_char_out(Psw,Pmin,Pmax)
-#define curve_out(P1,P2,P3,depth) sp_curve_out(P1,P2,P3,depth)
-#define end_contour_out() sp_end_contour_out()
-#define end_sub_char_out() sp_end_sub_char_out()
-#define init_intercepts_out() sp_init_intercepts_out()
-#define restart_intercepts_out() sp_restart_intercepts_out()
-#define set_first_band_out(Pmin,Pmax) sp_set_first_band_out(Pmin,Pmax)
-#define reduce_band_size_out() sp_reduce_band_size_out()
-#define next_band_out() sp_next_band_out()
-
-#define init_userout(specsarg) sp_init_userout(specsarg)
-
-#define reset() sp_reset()
-#define set_key(key) sp_set_key(key)
-#define get_cust_no(font_buff) sp_get_cust_no(font_buff)
-#define set_specs(specsarg) sp_set_specs(specsarg)
-#define setup_consts(xmin,xmax,ymin,ymax) sp_setup_consts(xmin,xmax,ymin,ymax)
-#define setup_tcb(ptcb) sp_setup_tcb(ptcb)
-#define setup_mult(input_mult) sp_setup_mult(input_mult)
-#define setup_offset(input_offset) sp_setup_offset(input_offset)
-#define type_tcb(ptcb) sp_type_tcb(ptcb)
-#define read_long(pointer) sp_read_long(pointer)
-#define read_word_u(pointer) sp_read_word_u(pointer)
-#define init_tcb() sp_init_tcb()
-#define scale_tcb(ptcb,x_pos,y_pos,x_scale,y_scale) sp_scale_tcb(ptcb,x_pos,y_pos,x_scale,y_scale)
-#define plaid_tcb(ppointer,format) sp_plaid_tcb(ppointer,format)
-#define skip_orus(ppointer,short_form,no_ctrl_zones) sp_skip_orus(ppointer,short_form,no_ctrl_zones)
-#define skip_interpolation_table(ppointer,format) sp_skip_interpolation_table(ppointer,format)
-#define skip_control_zone(ppointer,format) sp_skip_control_zone(ppointer,format)
-#define constr_update() sp_constr_update()
-#define read_oru_table(ppointer) sp_read_oru_table(ppointer)
-#define calculate_x_pix(start_edge,end_edge,constr_nr,x_scale,x_offset,ppo,setwidth_pix) sp_calculate_x_pix(start_edge,end_edge,constr_nr,x_scale,x_offset,ppo,setwidth_pix)
-#define calculate_y_pix(start_edge,end_edge,constr_nr,top_scale,bottom_scale,ppo,emtop_pix,embot_pix) sp_calculate_y_pix(start_edge,end_edge,constr_nr,top_scale,bottom_scale,ppo,emtop_pix,embot_pix)
-#define calculate_x_scale(x_factor,x_offset,no_x_ctrl_zones) sp_calculate_x_scale(x_factor,x_offset,no_x_ctrl_zones)
-#define calculate_y_scale(top_scale,bottom_scale,first_y_zone,no_Y_ctrl_zones) sp_calculate_y_scale(top_scale,bottom_scale,first_y_zone,no_Y_ctrl_zones)
-#define setup_pix_table(ppointer,short_form,no_X_ctrl_zones,no_Y_ctrl_zones) sp_setup_pix_table(ppointer,short_form,no_X_ctrl_zones,no_Y_ctrl_zones)
-#define setup_int_table(ppointer,no_X_int_zones, no_Y_int_zones) sp_setup_int_table(ppointer,no_X_int_zones, no_Y_int_zones)
-
-#define fn_init_out(specsarg) (*sp_globals.init_out)(specsarg)
-#define fn_begin_char(Psw,Pmin,Pmax) (*sp_globals.begin_char)(Psw,Pmin,Pmax)
-#define fn_begin_sub_char(Psw,Pmin,Pmax) (*sp_globals.begin_sub_char)(Psw,Pmin,Pmax)
-#define fn_end_sub_char() (*sp_globals.end_sub_char)()
-#define fn_end_char() (*sp_globals.end_char)()
-#define fn_line(P1) (*sp_globals.line)(P1)
-#define fn_end_contour() (*sp_globals.end_contour)()
-#define fn_begin_contour(P0,fmt) (*sp_globals.begin_contour)(P0,fmt)
-#define fn_curve(P1,P2,P3,depth) (*sp_globals.curve)(P1,P2,P3,depth)
-
-#define load_char_data(offset, no_bytes, buff_off) sp_load_char_data(offset, no_bytes, buff_off)
-#define report_error(n) sp_report_error(n)
-
-#if INCL_MULTIDEV
-
-#define set_bitmap_device(bfuncs,size) sp_set_bitmap_device(bfuncs,size)
-#define set_outline_device(ofuncs,size) sp_set_outline_device(ofuncs,size)
-
-#define open_bitmap(x_set_width, y_set_width, xmin, xmax, ymin, ymax) (*sp_globals.bitmap_device.p_open_bitmap)(x_set_width, y_set_width, xmin, xmax, ymin, ymax)
-#define set_bitmap_bits(y, xbit1, xbit2) (*sp_globals.bitmap_device.p_set_bits)(y, xbit1, xbit2)
-#define close_bitmap() (*sp_globals.bitmap_device.p_close_bitmap)()
-
-#define open_outline(x_set_width, y_set_width, xmin, xmax, ymin, ymax) (*sp_globals.outline_device.p_open_outline)(x_set_width, y_set_width, xmin, xmax, ymin, ymax)
-#define start_new_char() (*sp_globals.outline_device.p_start_char)()
-#define start_contour(x,y,outside) (*sp_globals.outline_device.p_start_contour)(x,y,outside)
-#define curve_to(x1,y1,x2,y2,x3,y3) (*sp_globals.outline_device.p_curve)(x1,y1,x2,y2,x3,y3)
-#define line_to(x,y) (*sp_globals.outline_device.p_line)(x,y)
-#define close_contour() (*sp_globals.outline_device.p_close_contour)()
-#define close_outline() (*sp_globals.outline_device.p_close_outline)()
-
-#else
-
-#define open_bitmap(x_set_width, y_set_width, xmin, xmax, ymin, ymax) sp_open_bitmap(x_set_width, y_set_width, xmin, xmax, ymin, ymax)
-#define set_bitmap_bits(y, xbit1, xbit2) sp_set_bitmap_bits(y, xbit1, xbit2)
-#define close_bitmap() sp_close_bitmap()
-
-#define open_outline(x_set_width, y_set_width, xmin, xmax, ymin, ymax) sp_open_outline(x_set_width, y_set_width, xmin, xmax, ymin, ymax)
-#define start_new_char() sp_start_new_char()
-#define start_contour(x,y,outside) sp_start_contour(x,y,outside)
-#define curve_to(x1,y1,x2,y2,x3,y3) sp_curve_to(x1,y1,x2,y2,x3,y3)
-#define line_to(x,y) sp_line_to(x,y)
-#define close_contour() sp_close_contour()
-#define close_outline() sp_close_outline()
-
-#endif
-
-#else
-
-#define GDECL SPEEDO_GLOBALS* sp_global_ptr;
-
-#define get_char_id(char_index) sp_get_char_id(sp_global_ptr,char_index)
-#define get_char_width(char_index) sp_get_char_width(sp_global_ptr,char_index)
-#define get_track_kern(track,point_size) sp_get_track_kern(sp_global_ptr,track,point_size)
-#define get_pair_kern(char_index1,char_index2) sp_get_pair_kern(sp_global_ptr,char_index1,char_index2)
-#define get_char_bbox(char_index,bbox) sp_get_char_bbox(sp_global_ptr,char_index,bbox)
-#define make_char(char_index) sp_make_char(sp_global_ptr,char_index)
-#if INCL_ISW
-#define compute_isw_scale() sp_compute_isw_scale(sp_global_ptr)
-#define do_make_char(char_index) sp_do_make_char(sp_global_ptr,char_index)
-#define make_char_isw(char_index,imported_width) sp_make_char_isw(sp_global_ptr,char_index,imported_width)
-#define reset_xmax(xmax) sp_reset_xmax(sp_global_ptr,xmax)
-#endif
-#if INCL_ISW || INCL_SQUEEZING
-#define preview_bounding_box(pointer,format) sp_preview_bounding_box(sp_global_ptr,pointer,format)
-#endif
-#define make_simp_char(pointer,format) sp_make_simp_char(sp_global_ptr,pointer,format)
-#define make_comp_char(pointer) sp_make_comp_char(sp_global_ptr,pointer)
-#define get_char_org(char_index,top_level) sp_get_char_org(sp_global_ptr,char_index,top_level)
-#define get_posn_arg(ppointer,format) sp_get_posn_arg(sp_global_ptr,ppointer,format)
-#define get_scale_arg(ppointer,format) sp_get_scale_arg(sp_global_ptr,ppointer,format)
-#define read_bbox(ppointer,pPmin,pPmax,set_flag) sp_read_bbox(sp_global_ptr,ppointer,pPmin,pPmax,set_flag)
-#define proc_outl_data(pointer) sp_proc_outl_data(sp_global_ptr,pointer)
-#define split_curve(P1,P2,P3,depth) sp_split_curve(sp_global_ptr,P1,P2,P3,depth)
-#define get_args(ppointer,format,pP) sp_get_args(sp_global_ptr,ppointer,format,pP)
-
-#define init_black(specsarg) sp_init_black(sp_global_ptr,specsarg)
-#define begin_char_black(Psw,Pmin,Pmax) sp_begin_char_black(sp_global_ptr,Psw,Pmin,Pmax)
-#define begin_contour_black(P1,outside) sp_begin_contour_black(sp_global_ptr,P1,outside)
-#define line_black(P1) sp_line_black(sp_global_ptr,P1)
-#define end_char_black() sp_end_char_black(sp_global_ptr)
-#define add_intercept_black(y,x) sp_add_intercept_black(sp_global_ptr,y,x)
-#define proc_intercepts_black() sp_proc_intercepts_black(sp_global_ptr)
-
-#define init_screen(specsarg) sp_init_screen(sp_global_ptr,specsarg)
-#define begin_char_screen(Psw,Pmin,Pmax) sp_begin_char_screen(sp_global_ptr,Psw,Pmin,Pmax)
-#define begin_contour_screen(P1,outside) sp_begin_contour_screen(sp_global_ptr,P1,outside)
-#define curve_screen(P1,P2,P3,depth) sp_curve_screen(sp_global_ptr,P1,P2,P3,depth)
-#define scan_curve_screen(X0,Y0,X1,Y1,X2,Y2,X3,Y3) sp_scan_curve_screen(sp_global_ptr,X0,Y0,X1,Y1,X2,Y2,X3,Y3)
-#define vert_line_screen(x,y1,y2) sp_vert_line_screen(sp_global_ptr,x,y1,y2)
-#define line_screen(P1) sp_line_screen(sp_global_ptr,P1)
-#define end_char_screen() sp_end_char_screen(sp_global_ptr)
-#define end_contour_screen() sp_end_contour_screen(sp_global_ptr)
-#define add_intercept_screen(y,x) sp_add_intercept_screen(sp_global_ptr,y,x)
-#define proc_intercepts_screen() sp_proc_intercepts_screen(sp_global_ptr)
-
-#define init_outline(specsarg) sp_init_outline(sp_global_ptr,specsarg)
-#define begin_char_outline(Psw,Pmin,Pmax) sp_begin_char_outline(sp_global_ptr,Psw,Pmin,Pmax)
-#define begin_sub_char_outline(Psw,Pmin,Pmax) sp_begin_sub_char_outline(sp_global_ptr,Psw,Pmin,Pmax)
-#define begin_contour_outline(P1,outside) sp_begin_contour_outline(sp_global_ptr,P1,outside)
-#define curve_outline(P1,P2,P3,depth) sp_curve_outline(sp_global_ptr,P1,P2,P3,depth)
-#define line_outline(P1) sp_line_outline(sp_global_ptr,P1)
-#define end_contour_outline() sp_end_contour_outline(sp_global_ptr)
-#define end_sub_char_outline() sp_end_sub_char_outline(sp_global_ptr)
-#define end_char_outline() sp_end_char_outline(sp_global_ptr)
-
-#define init_2d(specsarg) sp_init_2d(sp_global_ptr,specsarg)
-#define begin_char_2d(Psw, Pmin, Pmax) sp_begin_char_2d(sp_global_ptr,Psw, Pmin, Pmax)
-#define begin_contour_2d(P1, outside) sp_begin_contour_2d(sp_global_ptr,P1, outside)
-#define line_2d(P1) sp_line_2d(sp_global_ptr,P1)
-#define end_char_2d() sp_end_char_2d(sp_global_ptr)
-#define add_intercept_2d(y, x) sp_add_intercept_2d(sp_global_ptr,y, x)
-#define proc_intercepts_2d() sp_proc_intercepts_2d(sp_global_ptr)
-#define draw_vector_to_2d(x0, y0, x1, y1, band) sp_draw_vector_to_2d(sp_global_ptr,x0, y0, x1, y1, band)
-
-#define init_char_out(Psw,Pmin,Pmax) sp_init_char_out(sp_global_ptr,Psw,Pmin,Pmax)
-#define begin_sub_char_out(Psw,Pmin,Pmax) sp_begin_sub_char_out(sp_global_ptr,Psw,Pmin,Pmax)
-#define curve_out(P1,P2,P3,depth) sp_curve_out(sp_global_ptr,P1,P2,P3,depth)
-#define end_contour_out() sp_end_contour_out(sp_global_ptr)
-#define end_sub_char_out() sp_end_sub_char_out(sp_global_ptr)
-#define init_intercepts_out() sp_init_intercepts_out(sp_global_ptr)
-#define restart_intercepts_out() sp_restart_intercepts_out(sp_global_ptr)
-#define set_first_band_out(Pmin,Pmax) sp_set_first_band_out(sp_global_ptr,Pmin,Pmax)
-#define reduce_band_size_out() sp_reduce_band_size_out(sp_global_ptr)
-#define next_band_out() sp_next_band_out(sp_global_ptr)
-
-#define init_userout(specsarg) sp_init_userout(sp_global_ptr,specsarg)
-
-#define reset() sp_reset(sp_global_ptr)
-#define set_key(key) sp_set_key(sp_global_ptr,key)
-#define get_cust_no(font_buff) sp_get_cust_no(sp_global_ptr,font_buff)
-#define set_specs(specsarg) sp_set_specs(sp_global_ptr,specsarg)
-#define setup_consts(xmin,xmax,ymin,ymax) sp_setup_consts(sp_global_ptr,xmin,xmax,ymin,ymax)
-#define setup_tcb(ptcb) sp_setup_tcb(sp_global_ptr,ptcb)
-#define setup_mult(input_mult) sp_setup_mult(sp_global_ptr,input_mult)
-#define setup_offset(input_offset) sp_setup_offset(sp_global_ptr,input_offset)
-#define type_tcb(ptcb) sp_type_tcb(sp_global_ptr,ptcb)
-#define read_long(pointer) sp_read_long(sp_global_ptr,pointer)
-#define read_word_u(pointer) sp_read_word_u(sp_global_ptr,pointer)
-#define init_tcb() sp_init_tcb(sp_global_ptr)
-#define scale_tcb(ptcb,x_pos,y_pos,x_scale,y_scale) sp_scale_tcb(sp_global_ptr,ptcb,x_pos,y_pos,x_scale,y_scale)
-#define plaid_tcb(ppointer,format) sp_plaid_tcb(sp_global_ptr,ppointer,format)
-#define skip_orus(ppointer,short_form,no_ctrl_zones) sp_skip_orus(sp_global_ptr,ppointer,short_form,no_ctrl_zones)
-#define skip_interpolation_table(ppointer,format) sp_skip_interpolation_table(sp_global_ptr,ppointer,format)
-#define skip_control_zone(ppointer,format) sp_skip_control_zone(sp_global_ptr,ppointer,format)
-#define constr_update() sp_constr_update(sp_global_ptr)
-#define read_oru_table(ppointer) sp_read_oru_table(sp_global_ptr,ppointer)
-#define calculate_x_pix(start_edge,end_edge,constr_nr,x_scale,x_offset,ppo,setwidth_pix) sp_calculate_x_pix(sp_global_ptr,start_edge,end_edge,constr_nr,x_scale,x_offset,ppo,setwidth_pix)
-#define calculate_y_pix(start_edge,end_edge,constr_nr,top_scale,bottom_scale,ppo,emtop_pix,embot_pix) sp_calculate_y_pix(sp_global_ptr,start_edge,end_edge,constr_nr,top_scale,bottom_scale,ppo,emtop_pix,embot_pix)
-#define calculate_x_scale(x_factor,x_offset,no_x_ctrl_zones) sp_calculate_x_scale(sp_global_ptr,x_factor,x_offset,no_x_ctrl_zones)
-#define calculate_y_scale(top_scale,bottom_scale,first_y_zone,no_Y_ctrl_zones) sp_calculate_y_scale(sp_global_ptr,top_scale,bottom_scale,first_y_zone,no_Y_ctrl_zones)
-#define setup_pix_table(ppointer,short_form,no_X_ctrl_zones,no_Y_ctrl_zones) sp_setup_pix_table(sp_global_ptr,ppointer,short_form,no_X_ctrl_zones,no_Y_ctrl_zones)
-#define setup_int_table(ppointer,no_X_int_zones, no_Y_int_zones) sp_setup_int_table(sp_global_ptr,ppointer,no_X_int_zones, no_Y_int_zones)
-
-#define fn_init_out(specsarg) (*sp_globals.init_out)(sp_global_ptr,specsarg)
-#define fn_begin_char(Psw,Pmin,Pmax) (*sp_globals.begin_char)(sp_global_ptr,Psw,Pmin,Pmax)
-#define fn_begin_sub_char(Psw,Pmin,Pmax) (*sp_globals.begin_sub_char)(sp_global_ptr,Psw,Pmin,Pmax)
-#define fn_end_sub_char() (*sp_globals.end_sub_char)(sp_global_ptr)
-#define fn_end_char() (*sp_globals.end_char)(sp_global_ptr)
-#define fn_line(P1) (*sp_globals.line)(sp_global_ptr,P1)
-#define fn_end_contour() (*sp_globals.end_contour)(sp_global_ptr)
-#define fn_begin_contour(P0,fmt) (*sp_globals.begin_contour)(sp_global_ptr,P0,fmt)
-#define fn_curve(P1,P2,P3,depth) (*sp_globals.curve)(sp_global_ptr,P1,P2,P3,depth)
-
-
-#define load_char_data(offset, no_bytes, buff_off) sp_load_char_data(sp_global_ptr, offset, no_bytes, buff_off)
-#define report_error(n) sp_report_error(sp_global_ptr, n)
-
-#if INCL_MULTIDEV
-
-#define set_bitmap_device(bfuncs,size) sp_set_bitmap_device(sp_global_ptr,bfuncs,size)
-#define set_outline_device(ofuncs,size) sp_set_outline_device(sp_global_ptr,ofuncs,size)
-
-#define open_bitmap(x_set_width, y_set_width, xmin, xmax, ymin, ymax)(*sp_globals.bitmap_device.p_open_bitmap)(sp_global_ptr,x_set_width, y_set_width, xmin, xmax, ymin, ymax)
-#define set_bitmap_bits(y, xbit1, xbit2)(*sp_globals.bitmap_device.p_set_bits)(sp_global_ptr,y, xbit1, xbit2)
-#define close_bitmap()(*sp_globals.bitmap_device.p_close_bitmap)(sp_global_ptr)
-
-#define open_outline(x_set_width, y_set_width, xmin, xmax, ymin, ymax)(*sp_globals.outline_device.p_open_outline)(sp_global_ptr,x_set_width, y_set_width, xmin, xmax, ymin, ymax)
-#define start_new_char()(*sp_globals.outline_device.p_start_char)(sp_global_ptr)
-#define start_contour(x,y,outside)(*sp_globals.outline_device.p_start_contour)(sp_global_ptr,x,y,outside)
-#define curve_to(x1,y1,x2,y2,x3,y3)(*sp_globals.outline_device.p_curve)(sp_global_ptr,x1,y1,x2,y2,x3,y3)
-#define line_to(x,y)(*sp_globals.outline_device.p_line)(sp_global_ptr,x,y)
-#define close_contour()(*sp_globals.outline_device.p_close_contour)(sp_global_ptr)
-#define close_outline()(*sp_globals.outline_device.p_close_outline)(sp_global_ptr)
-
-#else
-
-#define open_bitmap(x_set_width, y_set_width, xmin, xmax, ymin, ymax) sp_open_bitmap(sp_global_ptr, x_set_width, y_set_width, xmin, xmax, ymin, ymax)
-#define set_bitmap_bits(y, xbit1, xbit2) sp_set_bitmap_bits(sp_global_ptr, y, xbit1, xbit2)
-#define close_bitmap() sp_close_bitmap(sp_global_ptr)
-
-#define open_outline(x_set_width, y_set_width, xmin, xmax, ymin, ymax) sp_open_outline(sp_global_ptr, x_set_width, y_set_width, xmin, xmax, ymin, ymax)
-#define start_new_char() sp_start_new_char(sp_global_ptr )
-#define start_contour(x,y,outside) sp_start_contour(sp_global_ptr, x,y,outside)
-#define curve_to(x1,y1,x2,y2,x3,y3) sp_curve_to(sp_global_ptr, x1,y1,x2,y2,x3,y3)
-#define line_to(x,y) sp_line_to(sp_global_ptr, x,y)
-#define close_contour() sp_close_contour(sp_global_ptr)
-#define close_outline() sp_close_outline(sp_global_ptr)
-
-#endif
-#endif
-
-
projects / rdpsrv / blobdiff