X-Git-Url: https://git.sesse.net/?p=rdpsrv;a=blobdiff_plain;f=Xserver%2Flib%2Ffont%2FSpeedo%2Fset_trns.c;fp=Xserver%2Flib%2Ffont%2FSpeedo%2Fset_trns.c;h=0000000000000000000000000000000000000000;hp=c3378cb0ce64aa848df540a762bd3bb577407f10;hb=ce66b81460e5353db09d45c02339d4583fbda255;hpb=7772d71ffd742cfc9b7ff214659d16c5bb56a391 diff --git a/Xserver/lib/font/Speedo/set_trns.c b/Xserver/lib/font/Speedo/set_trns.c deleted file mode 100644 index c3378cb..0000000 --- a/Xserver/lib/font/Speedo/set_trns.c +++ /dev/null @@ -1,1329 +0,0 @@ -/* $XConsortium: set_trns.c,v 1.6 94/02/10 11:05:59 gildea Exp $ */ - -/* - -Copyright 1989-1991, Bitstream Inc., Cambridge, MA. -You are hereby granted permission under all Bitstream propriety rights to -use, copy, modify, sublicense, sell, and redistribute the Bitstream Speedo -software and the Bitstream Charter outline font for any purpose and without -restrictions; provided, that this notice is left intact on all copies of such -software or font and that Bitstream's trademark is acknowledged as shown below -on all unmodified copies of such font. - -BITSTREAM CHARTER is a registered trademark of Bitstream Inc. - - -BITSTREAM INC. DISCLAIMS ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING -WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A -PARTICULAR PURPOSE. BITSTREAM SHALL NOT BE LIABLE FOR ANY DIRECT OR INDIRECT -DAMAGES, INCLUDING BUT NOT LIMITED TO LOST PROFITS, LOST DATA, OR ANY OTHER -INCIDENTAL OR CONSEQUENTIAL DAMAGES, ARISING OUT OF OR IN ANY WAY CONNECTED -WITH THE SPEEDO SOFTWARE OR THE BITSTREAM CHARTER OUTLINE FONT. - -*/ - - - -/*************************** S E T _ T R N S . C ***************************** - * * - * This module is called from do_char.c to set up the intelligent * - * transformation for one character (or sub-character of a composite * - * character. - * * - ****************************************************************************/ - - -#include "spdo_prv.h" /* General definitions for Speedo */ - -#define DEBUG 0 - -#if DEBUG -#include -#define SHOW(X) printf("X = %d\n", X) -#else -#define SHOW(X) -#endif -/***** LOCAL MACROS *****/ - -#define SQUEEZE_X_ORU(A,B,C) ((((fix31)A * (fix31)B) + C) >> 16) -#define ABS(A) ((A < 0)? -A:A) /* absolute value */ -#define IMPORT_FACTOR \ - shift = 16;\ - while (*x_factor > (0x7fffffffL / (isw_scale >> (16 - shift))))\ - shift--;\ - *x_factor = (*x_factor * (isw_scale>>(16-shift))) >> shift; - -/***** GLOBAL VARIABLES *****/ - -/***** GLOBAL FUNCTIONS *****/ - -/***** EXTERNAL VARIABLES *****/ - -/***** EXTERNAL FUNCTIONS *****/ - -/***** STATIC VARIABLES *****/ - -/***** STATIC FUNCTIONS *****/ - -#if PROTOS_AVAIL -static void sp_constr_update(PROTO_DECL1); -static ufix8 FONTFAR *sp_setup_pix_table(PROTO_DECL2 ufix8 FONTFAR *pointer,boolean short_form,fix15 no_X_ctrl_zones,fix15 no_Y_ctrl_zones); -static ufix8 FONTFAR *sp_setup_int_table(PROTO_DECL2 ufix8 FONTFAR *pointer,fix15 no_X_int_zones,fix15 no_Y_int_zones); -#else -static void sp_constr_update(); /* Update constraint table */ -static ufix8 FONTFAR *sp_setup_pix_table(); /* Read control zone table */ -static ufix8 FONTFAR *sp_setup_int_table(); /* Read interpolation zone table */ -#endif - - -FUNCTION void init_tcb() -GDECL -/* - * Called by sp_make_char() and make_comp_char() to initialize the current - * transformation control block to the top level transformation. - */ -{ -sp_globals.tcb = sp_globals.tcb0; -} - -FUNCTION void scale_tcb(ptcb, x_pos, y_pos, x_scale, y_scale) -GDECL -tcb_t GLOBALFAR *ptcb; /* Transformation control block */ -fix15 x_pos; /* X position (outline res units) */ -fix15 y_pos; /* Y position (outline res units) */ -fix15 x_scale; /* X scale factor * ONE_SCALE */ -fix15 y_scale; /* Y scale factor * ONE_SCALE */ -/* - * Called by make_comp_char() to apply position and scale for each of the - * components of a compound character. - */ -{ -fix15 xx_mult = ptcb->xxmult; -fix15 xy_mult = ptcb->xymult; -fix31 x_offset = ptcb->xoffset; -fix15 yx_mult = ptcb->yxmult; -fix15 yy_mult = ptcb->yymult; -fix31 y_offset = ptcb->yoffset; - -ptcb->xxmult = TRANS(xx_mult, x_scale, (fix31)SCALE_RND, SCALE_SHIFT); -ptcb->xymult = TRANS(xy_mult, y_scale, (fix31)SCALE_RND, SCALE_SHIFT); -ptcb->xoffset = MULT16(xx_mult, x_pos) + MULT16(xy_mult, y_pos) + x_offset; -ptcb->yxmult = TRANS(yx_mult, x_scale, (fix31)SCALE_RND, SCALE_SHIFT); -ptcb->yymult = TRANS(yy_mult, y_scale, (fix31)SCALE_RND, SCALE_SHIFT); -ptcb->yoffset = MULT16(yx_mult, x_pos) + MULT16(yy_mult, y_pos) + y_offset; - -type_tcb(ptcb); /* Reclassify transformation types */ -} - -FUNCTION ufix8 FONTFAR *skip_interpolation_table(pointer,format) -GDECL -ufix8 FONTFAR *pointer; /* Pointer to next byte in char data */ -ufix8 format; /* Character format byte */ -{ -fix15 i,n; -ufix8 intsize[9]; - -intsize[0] = 1; -intsize[1] = 2; -intsize[2] = 3; -intsize[3] = 1; -intsize[4] = 2; -intsize[5] = 1; -intsize[6] = 2; -intsize[7] = 0; -intsize[8] = 0; - -n = ((format & BIT6)? (fix15)NEXT_BYTE(pointer): 0) + - ((format & BIT7)? (fix15)NEXT_BYTE(pointer): 0); -for (i = 0; i < n; i++) /* For each entry in int table ... */ - { - format = NEXT_BYTE(pointer); /* Read format byte */ - if (format & BIT7) /* Short Start/End point spec? */ - { - pointer++; /* Skip Start/End point byte */ - } - else - { - pointer += intsize[format & 0x7]; /* Skip Start point spec */ - pointer += intsize[(format >> 3) & 0x7]; /* Skip End point spec */ - } - } -return pointer; -} -FUNCTION ufix8 FONTFAR *skip_control_zone(pointer,format) -GDECL -ufix8 FONTFAR *pointer; /* Pointer to next byte in char data */ -ufix8 format; /* Character format byte */ -{ -fix15 i,n; -ufix16 tmpufix16; -fix15 constr; - -n = sp_globals.no_X_orus + sp_globals.no_Y_orus - 2; -for (i = 0; i < n; i++) /* For each entry in control table ... */ - { - if (format & BIT4) - pointer++; /* Skip short form From/To fields */ - else - pointer += 2; /* Skip FROM and TO fields */ - /* skip constraints field */ - constr = NEXT_BYTES (pointer, tmpufix16); - - } -return pointer; -} - -#if INCL_RULES -#else -FUNCTION ufix8 FONTFAR *plaid_tcb(pointer, format) -GDECL -ufix8 FONTFAR *pointer; /* Pointer to next byte in char data */ -ufix8 format; /* Character format byte */ -/* - * Called by make_simp_char() and make_comp_char() to set up the controlled - * coordinate table and skip all other intelligent scaling rules embedded - * in the character data. - * Updates pointer to first byte after plaid data. - * This is used only if intelligent scaling is not supported in the - * configuration definitions. - */ -{ -fix15 i, n; - - - -sp_globals.no_X_orus = (format & BIT2)? - (fix15)NEXT_BYTE(pointer): - 0; -sp_globals.no_Y_orus = (format & BIT3)? - (fix15)NEXT_BYTE(pointer): - 0; -pointer = read_oru_table(pointer); /* Updates no_X/Y/orus */ -sp_globals.Y_edge_org = sp_globals.no_X_orus; - -/* Skip over control zone table */ -pointer = skip_control_zone(pointer,format); - -/* Skip over interpolation table */ -pointer = skip_interpolation_table(pointer,format); -return pointer; -} -#endif - -#if INCL_RULES -FUNCTION ufix8 FONTFAR *plaid_tcb(pointer, format) -GDECL -ufix8 FONTFAR *pointer; /* Pointer to next byte in char data */ -ufix8 format; /* Character format byte */ -/* - * Called by make_simp_char() and make_comp_char() to set up the controlled - * coordinate table and process all intelligent scaling rules embedded - * in the character data. - * Updates pointer to first byte after plaid data. - * This is used only if intelligent scaling is enabled in the - * configuration definitions. - */ -{ -fix15 no_X_ctrl_zones; -fix15 no_Y_ctrl_zones; -fix15 no_X_int_zones; -fix15 no_Y_int_zones; - -#if INCL_PLAID_OUT /* Plaid data monitoring included? */ -begin_plaid_data(); -#endif - -sp_constr_update(); /* Update constraint table if required */ - -sp_globals.no_X_orus = (format & BIT2)? - (fix15)NEXT_BYTE(pointer): - 0; -sp_globals.no_Y_orus = (format & BIT3)? - (fix15)NEXT_BYTE(pointer): - 0; -pointer = read_oru_table(pointer); /* Updates no_X/Y/orus to include zero values */ -sp_globals.Y_edge_org = sp_globals.no_X_orus; -if (sp_globals.no_X_orus > 1) /* 2 or more controlled X coordinates? */ - sp_globals.tcb.xmode = sp_globals.tcb.xtype; /* Enable intelligent scaling in X */ - -if (sp_globals.no_Y_orus > 1) /* 2 or more controlled Y coordinates? */ - sp_globals.tcb.ymode = sp_globals.tcb.ytype; /* Enable intelligent scaling in Y */ - -no_X_ctrl_zones = sp_globals.no_X_orus - 1; -no_Y_ctrl_zones = sp_globals.no_Y_orus - 1; -pointer = sp_setup_pix_table(pointer, (boolean)(format & BIT4), - no_X_ctrl_zones, no_Y_ctrl_zones); - -no_X_int_zones = (format & BIT6)? - (fix15)NEXT_BYTE(pointer): - 0; -no_Y_int_zones = (format & BIT7)? - (fix15)NEXT_BYTE(pointer): - 0; -sp_globals.Y_int_org = no_X_int_zones; -pointer = sp_setup_int_table(pointer, no_X_int_zones, no_Y_int_zones); - -#if INCL_PLAID_OUT /* Plaid data monitoring included? */ -end_plaid_data(); -#endif - -return pointer; -} -#endif - -#if INCL_RULES -FUNCTION static void sp_constr_update() -GDECL -/* - * Called by plaid_tcb() to update the constraint table for the current - * transformation. - * This is always carried out whenever a character is generated following - * a change of font or scale factor or after initialization. - */ -{ -fix31 ppo; -fix15 xppo; -fix15 yppo; -ufix8 FONTFAR *pointer; -fix15 no_X_constr; -fix15 no_Y_constr; -fix15 i, j, k, l, n; -fix15 ppm; -ufix8 format; -ufix8 format1; -fix15 limit; -ufix16 constr_org; -fix15 constr_nr; -fix15 size; -fix31 off; -fix15 min; -fix15 orus; -fix15 pix; -ufix16 tmpufix16; /* in extended mode, macro uses secnd term */ - -if (sp_globals.constr.data_valid && /* Constr table already done and ... */ - (sp_globals.tcb.xppo == sp_globals.constr.xppo) && /* ... X pix per oru unchanged and ... */ - (sp_globals.tcb.yppo == sp_globals.constr.yppo)) /* ... Y pix per oru unchanged? */ - { - return; /* No need to update constraint table */ - } - -sp_globals.constr.xppo = xppo = sp_globals.tcb.xppo; /* Update X pixels per oru indicator */ -sp_globals.constr.yppo = yppo = sp_globals.tcb.yppo; /* Update Y pixels per oru indicator */ -sp_globals.constr.data_valid = TRUE; /* Mark constraint table valid */ - -pointer = sp_globals.constr.org; /* Point to first byte of constraint data */ -no_X_constr = NEXT_BYTES(pointer, tmpufix16); /* Read nmbr of X constraints */ -no_Y_constr = NEXT_BYTES(pointer, tmpufix16); /* Read nmbr of Y constraints */ - -i = 0; -constr_org = 0; -n = no_X_constr; -ppo = xppo; -for (j = 0; ; j++) - { - sp_globals.c_act[i] = FALSE; /* Flag constraint 0 not active */ - sp_globals.c_pix[i++] = 0; /* Constraint 0 implies no minimum */ - sp_globals.c_act[i] = FALSE; /* Flag constraint 1 not active */ - sp_globals.c_pix[i++] = sp_globals.onepix; /* Constraint 1 implies min 1 pixel*/ - ppm = (ppo * (fix31)sp_globals.orus_per_em) >> sp_globals.multshift; - for (k = 0; k < n; k++) - { - format = NEXT_BYTE(pointer); /* Read format byte */ - limit = (fix15)NEXT_BYTE(pointer); /* Read limit field */ - sp_globals.c_act[i] = - ((ppm < limit) || (limit == 255)) && - sp_globals.constr.active; - if (sp_globals.c_act[i]) /* Constraint active? */ - { - if ((format & BIT1) && /* Constraint specified and ... */ - (constr_nr = constr_org + - ((format & BIT0)? /* Read unsigned constraint value */ - NEXT_WORD(pointer): - (fix15)NEXT_BYTE(pointer)), - sp_globals.c_act[constr_nr])) /* ... and specified constraint active? */ - { - pix = sp_globals.c_pix[constr_nr]; /* Use constrained pixel value */ - format1 = format; - for (l = 2; l > 0; l--) /* Skip 2 arguments */ - { - format1 >>= 2; - if (size = format1 & 0x03) - pointer += size - 1; - } - } - else /* Constraint absent or inactive? */ - { - orus = (format & BIT2)? /* Read unsigned oru value */ - NEXT_WORD(pointer): - (fix15)NEXT_BYTE(pointer); - - if (format & BIT5) /* Specified offset value? */ - { - off = (fix31)((format & BIT4)? /* Read offset value */ - NEXT_WORD(pointer): - (fix7)NEXT_BYTE(pointer)); - off = (off << (sp_globals.multshift - 6)) + sp_globals.multrnd; - } - else /* Unspecified (zero) offset value? */ - { - off = sp_globals.multrnd; - } - - pix = (fix15)(((fix31)orus * ppo + off) / (1 << sp_globals.mpshift)) & sp_globals.pixfix; - } - } - else /* Constraint inactive? */ - { - format1 = format; - for (l = 3; l > 0; l--) /* Skip over 3 arguments */ - { - if (size = format1 & 0x03) - pointer += size - 1; - format1 >>= 2; - } - pix = 0; - } - - if (format & 0xc0) /* Specified minimum value? */ - { - min = (format & BIT7)? /* Read unsigned minimum value */ - (fix15)NEXT_BYTE(pointer) << sp_globals.pixshift: - sp_globals.onepix; - } - else /* Unspecified (zero) minimum value? */ - { - min = 0; - } - - sp_globals.c_pix[i] = (pix < min)? min: pix; - i++; - } - if (j) break; /* Finished if second time around loop */ - constr_org = sp_globals.Y_constr_org = i; - n = no_Y_constr; - ppo = yppo; - } - -#if DEBUG -printf("\nCONSTRAINT TABLE\n"); -n = no_X_constr + 2; -for (i = 0; i < n; i++) - { - printf("%3d ", i); - if (sp_globals.c_act[i]) - { - printf("T "); - } - else - { - printf("F "); - } - printf("%5.1f\n", ((real)sp_globals.c_pix[i] / (real)sp_globals.onepix)); - } -printf("--------------\n"); -n = no_Y_constr + 2; -for (i = 0; i < n; i++) - { - j = i + sp_globals.Y_constr_org; - printf("%3d ", i); - if (sp_globals.c_act[j]) - { - printf("T "); - } - else - { - printf("F "); - } - printf("%5.1f\n", ((real)sp_globals.c_pix[j] / (real)sp_globals.onepix)); - } -#endif - -} -#endif - -FUNCTION ufix8 FONTFAR *read_oru_table(pointer) -GDECL -ufix8 FONTFAR *pointer; /* Pointer to first byte in controlled coord table */ -/* - * Called by plaid_tcb() to read the controlled coordinate table from the - * character data in the font. - * Updates the pointer to the byte following the controlled coordinate - * data. - */ -{ -fix15 i, j, k, n; -boolean zero_not_in; -boolean zero_added; -fix15 oru; - -#if INCL_RULES -fix15 pos; -#endif - -i = 0; -n = sp_globals.no_X_orus; -#if INCL_RULES -pos = sp_globals.tcb.xpos; -#endif -for (j = 0; ; j++) - { - zero_not_in = TRUE; - zero_added = FALSE; - for (k = 0; k < n; k++) - { - oru = NEXT_WORD(pointer); - if (zero_not_in && (oru >= 0)) /* First positive oru value? */ - { -#if INCL_RULES - sp_plaid.pix[i] = pos; /* Insert position in pix array */ -#endif - if (oru != 0) /* Zero oru value omitted? */ - { - sp_plaid.orus[i++] = 0; /* Insert zero value in oru array */ - zero_added = TRUE; /* Remember to increment size of array */ - } - zero_not_in = FALSE; /* Inhibit further testing for zero ins */ - } - sp_plaid.orus[i++] = oru; /* Add specified oru value to array */ - } - if (zero_not_in) /* All specified oru values negative? */ - { -#if INCL_RULES - sp_plaid.pix[i] = pos; /* Insert position in pix array */ -#endif - sp_plaid.orus[i++] = 0; /* Add zero oru value */ - zero_added = TRUE; /* Remember to increment size of array */ - } - if (j) /* Both X and Y orus read? */ - break; - if (zero_added) - sp_globals.no_X_orus++; /* Increment X array size */ - n = sp_globals.no_Y_orus; /* Prepare to read Y oru values */ -#if INCL_RULES - pos = sp_globals.tcb.ypos; -#endif - } -if (zero_added) /* Zero Y oru value added to array? */ - sp_globals.no_Y_orus++; /* Increment Y array size */ - -#if DEBUG -printf("\nX ORUS\n"); -n = sp_globals.no_X_orus; -for (i = 0; i < n; i++) - { - printf("%2d %4d\n", i, sp_plaid.orus[i]); - } -printf("\nY ORUS\n"); -n = sp_globals.no_Y_orus; -for (i = 0; i < n; i++) - { - printf("%2d %4d\n", i, sp_plaid.orus[i + sp_globals.no_X_orus]); - } -#endif - -return pointer; /* Update pointer */ -} -#if INCL_SQUEEZING || INCL_ISW -FUNCTION static void calculate_x_pix(start_edge, end_edge, constr_nr, - x_scale, x_offset, ppo, setwidth_pix) -GDECL -ufix8 start_edge, end_edge; -ufix16 constr_nr; -fix31 x_scale; -fix31 x_offset; -fix31 ppo; -fix15 setwidth_pix; -/* - * Called by sp_setup_pix_table() when X squeezing is necessary - * to insert the correct edge in the global pix array - */ -{ -fix15 zone_pix; -fix15 start_oru, end_oru; - -/* compute scaled oru coordinates */ -start_oru= (fix15)(SQUEEZE_X_ORU(sp_plaid.orus[start_edge], x_scale, x_offset)); -end_oru = (fix15)(SQUEEZE_X_ORU(sp_plaid.orus[end_edge], x_scale, x_offset)); - -if (!sp_globals.c_act[constr_nr]) /* constraint inactive */ - { - /* calculate zone width */ - zone_pix = (fix15)(((((fix31)end_oru - (fix31)start_oru) * ppo) / - (1< 0) && (zone_pix < 0)) - zone_pix = 0x7ffff; - /* check for minimum */ - if ((ABS(zone_pix)) >= sp_globals.c_pix[constr_nr]) - goto Lx; - } -/* use the zone size from the constr table - scale it */ -zone_pix = (fix15)(((SQUEEZE_MULT(x_scale,sp_globals.c_pix[constr_nr])) - + sp_globals.pixrnd) & sp_globals.pixfix); - -/* look for overflow */ -if ((sp_globals.c_pix[constr_nr] > 0) && (zone_pix < 0)) - zone_pix = 0x7fff; - -if (start_edge > end_edge) - { - zone_pix = -zone_pix; - } -Lx: -/* assign pixel value to global pix array */ -sp_plaid.pix[end_edge]=sp_plaid.pix[start_edge] + zone_pix; - -/* check for overflow */ -if (((sp_plaid.pix[start_edge] >0) && (zone_pix >0)) && - (sp_plaid.pix[end_edge] < 0)) - sp_plaid.pix[end_edge] = 0x7fff; /* set it to the max */ - -/* be sure to be in the setwidth !*/ -#if INCL_ISW -if (!sp_globals.import_setwidth_act) /* only check left edge if not isw only */ -#endif -if ((sp_globals.pspecs->flags & SQUEEZE_LEFT) && (sp_plaid.pix[end_edge] < 0)) - sp_plaid.pix[end_edge] = 0; -if ((sp_globals.pspecs->flags & SQUEEZE_RIGHT) && - (sp_plaid.pix[end_edge] > setwidth_pix)) - sp_plaid.pix[end_edge] = setwidth_pix; - -} -#endif - -#if INCL_SQUEEZING -FUNCTION static void calculate_y_pix(start_edge, end_edge,constr_nr, - top_scale, bottom_scale,ppo,em_top_pix, em_bot_pix) -GDECL -ufix8 start_edge, end_edge; -ufix16 constr_nr; -fix31 top_scale, bottom_scale; -fix31 ppo; -fix15 em_top_pix, em_bot_pix; - -/* - * Called by sp_setup_pix_table() when Y squeezing is necessary - * to insert the correct edge in the global pix array - */ -{ -fix15 zone_pix; -fix15 start_oru, end_oru; -fix31 zone_width, above_base, below_base; - -/* check whether edge is above or below the baseline */ -/* and apply appropriate scale factor to get scaled oru coordinates */ -if (sp_plaid.orus[start_edge] < 0) - start_oru =(fix15)(SQUEEZE_MULT(sp_plaid.orus[start_edge], bottom_scale)); -else - start_oru =(fix15)(SQUEEZE_MULT(sp_plaid.orus[start_edge], top_scale)); - -if (sp_plaid.orus[end_edge] < 0) - end_oru =(fix15)(SQUEEZE_MULT(sp_plaid.orus[end_edge], bottom_scale)); -else - end_oru =(fix15)(SQUEEZE_MULT(sp_plaid.orus[end_edge], top_scale)); - -if (!sp_globals.c_act[constr_nr]) /* Constraint inactive? */ - { - /* calculate zone width */ - zone_pix = (fix15)(((((fix31)end_oru - (fix31)start_oru) * ppo) - >> sp_globals.mpshift)+ sp_globals.pixrnd) & sp_globals.pixfix; - /* check minimum */ - if ((ABS(zone_pix)) >= sp_globals.c_pix[constr_nr]) - goto Ly; - } - -/* Use zone size from constr table */ -if ((end_oru >= 0) && (start_oru >=0)) - /* all above baseline */ - zone_pix = (fix15)(SQUEEZE_MULT(top_scale, sp_globals.c_pix[constr_nr])); -else if ((end_oru <= 0) && (start_oru <=0)) - /* all below baseline */ - zone_pix = (fix15)(SQUEEZE_MULT(bottom_scale, sp_globals.c_pix[constr_nr])); -else - { - /* mixture */ - if (start_oru > 0) - { - zone_width = start_oru - end_oru; - /* get % above baseline in 16.16 fixed point */ - above_base = (((fix31)start_oru) << 16) / - ((fix31)zone_width) ; - /* get % below baseline in 16.16 fixed point */ - below_base = (((fix31)-end_oru) << 16) / - ((fix31)zone_width) ; - } - else - { - zone_width = end_oru - start_oru; - /* get % above baseline in 16.16 fixed point */ - above_base = (((fix31)-start_oru) << 16) / - ((fix31)zone_width) ; - /* get % below baseline in 16.16 fixed point */ - below_base = (((fix31)end_oru) << 16) / - ((fix31)zone_width) ; - } - /* % above baseline * total zone * top_scale + */ - /* % below baseline * total zone * bottom_scale */ - zone_pix = ((((above_base * (fix31)sp_globals.c_pix[constr_nr]) >> 16) * - top_scale) + - (((below_base * (fix31)sp_globals.c_pix[constr_nr]) >> 16) * - bottom_scale)) >> 16; - } - -/* make this zone pix fall on a pixel boundary */ -zone_pix = (zone_pix + sp_globals.pixrnd) & sp_globals.pixfix; - -/* if minimum is in effect make the zone one pixel */ -if ((sp_globals.c_pix[constr_nr] != 0) && (zone_pix < sp_globals.onepix)) - zone_pix = sp_globals.onepix; - -if (start_edge > end_edge) - { - zone_pix = -zone_pix; /* Use negatve zone size */ - } -Ly: -/* assign global pix value */ -sp_plaid.pix[end_edge] = sp_plaid.pix[start_edge] + zone_pix; /* Insert end pixels */ - -/* make sure it is in the EM !*/ -if ((sp_globals.pspecs->flags & SQUEEZE_TOP) && - (sp_plaid.pix[end_edge] > em_top_pix)) - sp_plaid.pix[end_edge] = em_top_pix; -if ((sp_globals.pspecs->flags & SQUEEZE_BOTTOM) && - (sp_plaid.pix[end_edge] < em_bot_pix)) - sp_plaid.pix[end_edge] = em_bot_pix; -} - -FUNCTION boolean calculate_x_scale(x_factor, x_offset, no_X_ctrl_zones) -GDECL -fix31 *x_factor; -fix31 *x_offset; -fix15 no_X_ctrl_zones; /* Number of X control zones */ -/* - * Called by sp_setup_pix_table() when squeezing is included - * to determine whether X scaling is necessary. If it is, the - * scale factor and offset are computed. This function returns - * a boolean value TRUE = X squeezind is necessary, FALSE = no - * X squeezing is necessary. - */ -{ -boolean squeeze_left, squeeze_right; -boolean out_on_right, out_on_left; -fix15 bbox_width,set_width; -fix15 bbox_xmin, bbox_xmax; -fix15 x_offset_pix; -fix15 i; -#if INCL_ISW -fix31 isw_scale; -fix15 shift; -#endif - - -/* set up some flags and common calculations */ -squeeze_left = (sp_globals.pspecs->flags & SQUEEZE_LEFT)? TRUE:FALSE; -squeeze_right = (sp_globals.pspecs->flags & SQUEEZE_RIGHT)? TRUE:FALSE; -bbox_xmin = sp_globals.bbox_xmin_orus; -bbox_xmax = sp_globals.bbox_xmax_orus; -set_width = sp_globals.setwidth_orus; - -if (bbox_xmax > set_width) - out_on_right = TRUE; -else - out_on_right = FALSE; -if (bbox_xmin < 0) - out_on_left = TRUE; -else - out_on_left = FALSE; -bbox_width =bbox_xmax - bbox_xmin; - -/* - * don't need X squeezing if: - * - X squeezing not enabled - * - bbox doesn't violate on left or right - * - left squeezing only is enabled and char isn't out on left - * - right squeezing only is enabled and char isn't out on right - */ - -if ((!squeeze_left && !squeeze_right) || - (!out_on_right && !out_on_left) || - (squeeze_left && !squeeze_right && !out_on_left) || - (squeeze_right && !squeeze_left && !out_on_right)) - return FALSE; - -#if INCL_ISW -if (sp_globals.import_setwidth_act) - { - /* if both isw and squeezing is going on - let the imported */ - /* setwidth factor be factored in with the squeeze */ - isw_scale = compute_isw_scale(); - /*sp_globals.setwidth_orus = sp_globals.imported_width;*/ - } -else - isw_scale = 0x10000L; /* 1 in 16.16 notation */ -#endif - -/* squeezing on left and right ? */ -if (squeeze_left && squeeze_right) - { - /* calculate scale factor */ - if (bbox_width < set_width) - *x_factor = 0x10000L; /* 1 in 16.16 notation */ - else - *x_factor = ((fix31)set_width<<16)/(fix31)bbox_width; -#if INCL_ISW - IMPORT_FACTOR -#endif - /* calculate offset */ - if (out_on_left) /* fall out on left ? */ - *x_offset = -(fix31)*x_factor * (fix31)bbox_xmin; - /* fall out on right and I am shifting only ? */ - else if (out_on_right && (*x_factor == 0x10000L)) - *x_offset = -(fix31)*x_factor * (fix31)(bbox_xmax - set_width); - else - *x_offset = 0x0L; /* 0 in 16.16 notation */ - } -/* squeezing on left only and violates left */ -else if (squeeze_left) - { - if (bbox_width < set_width) /* will it fit if I shift it ? */ - *x_factor = 0x10000L; /* 1 in 16.16 notation */ - else if (out_on_right) - *x_factor = ((fix31)set_width<<16)/(fix31)bbox_width; - else - *x_factor = ((fix31)set_width<<16)/ - (fix31)(bbox_width - (bbox_xmax-set_width)); -#if INCL_ISW - IMPORT_FACTOR -#endif - *x_offset = (fix31)-*x_factor * (fix31)bbox_xmin; - } - -/* I must be squeezing on right, and violates right */ -else - { - if (bbox_width < set_width) /* will it fit if I shift it ? */ - { /* just shift it left - it will fit in the bbox */ - *x_factor = 0x10000L; /* 1 in 16.16 notation */ -#if INCL_ISW - IMPORT_FACTOR -#endif - *x_offset = (fix31)-*x_factor * (fix31)bbox_xmin; - } - else if (out_on_left) - { - *x_factor = ((fix31)set_width<<16)/(fix31)bbox_width; -#if INCL_ISW - IMPORT_FACTOR -#endif - *x_offset = 0x0L; /* 0 in 16.16 notation */ - } - else - { - *x_factor = ((fix31)set_width<<16)/(fix31)bbox_xmax; -#if INCL_ISW - IMPORT_FACTOR -#endif - *x_offset = 0x0L; /* 0 in 16.16 notation */ - } - } - -x_offset_pix = (fix15)(((*x_offset >> 16) * sp_globals.tcb0.xppo) - / (1<0) && (x_offset_pix < sp_globals.onepix)) - x_offset_pix = sp_globals.onepix; - -/* look for the first non-negative oru value, scale and add the offset */ -/* to the corresponding pixel value - note that the pixel value */ -/* is set in read_oru_table. */ - -/* look at all the X edges */ -for (i=0; i < (no_X_ctrl_zones+1); i++) - if (sp_plaid.orus[i] >= 0) - { - sp_plaid.pix[i] = (SQUEEZE_MULT(sp_plaid.pix[i], *x_factor) - +sp_globals.pixrnd + x_offset_pix) & sp_globals.pixfix; - break; - } - -return TRUE; -} - -FUNCTION boolean calculate_y_scale(top_scale, bottom_scale, - first_Y_zone, no_Y_ctrl_zones) -GDECL -fix31 *top_scale, *bottom_scale; -fix15 first_Y_zone; -fix15 no_Y_ctrl_zones; -/* - * Called by sp_setup_pix_table() when squeezing is included - * to determine whether Y scaling is necessary. If it is, - * two scale factors are computed, one for above the baseline, - * and one for below the basline. - * This function returns a boolean value TRUE = Y squeezind is necessary, - * FALSE = no Y squeezing is necessary. - */ -{ -boolean squeeze_top, squeeze_bottom; -boolean out_on_top, out_on_bottom; -fix15 bbox_top, bbox_bottom; -fix15 bbox_height; -fix15 i; - -/* set up some flags and common calculations */ -squeeze_top = (sp_globals.pspecs->flags & SQUEEZE_TOP)? TRUE:FALSE; -squeeze_bottom = (sp_globals.pspecs->flags & SQUEEZE_BOTTOM)? TRUE:FALSE; -bbox_top = sp_globals.bbox_ymax_orus; -bbox_bottom = sp_globals.bbox_ymin_orus; -bbox_height = bbox_top - bbox_bottom; - -if (bbox_top > EM_TOP) - out_on_top = TRUE; -else - out_on_top = FALSE; - -if (bbox_bottom < EM_BOT) - out_on_bottom = TRUE; -else - out_on_bottom = FALSE; - -/* - * don't need Y squeezing if: - * - Y squeezing not enabled - * - bbox doesn't violate on top or bottom - * - top squeezing only is enabled and char isn't out on top - * - bottom squeezing only is enabled and char isn't out on bottom - */ -if ((!squeeze_top && !squeeze_bottom) || - (!out_on_top && !out_on_bottom) || - (squeeze_top && !squeeze_bottom && !out_on_top) || - (squeeze_bottom && !squeeze_top && !out_on_bottom)) - return FALSE; - -if (squeeze_top && (bbox_top > EM_TOP)) - *top_scale = ((fix31)EM_TOP << 16)/(fix31)(bbox_top); -else - *top_scale = 0x10000L; /* 1 in 16.16 fixed point */ - -if (squeeze_bottom && (bbox_bottom < EM_BOT)) - *bottom_scale = ((fix31)-(EM_BOT) << 16)/(fix31)-bbox_bottom; -else - *bottom_scale = 0x10000L; - -if (sp_globals.squeezing_compound) - { - for (i=first_Y_zone; i < (first_Y_zone + no_Y_ctrl_zones + 1); i++) - { - if (sp_plaid.orus[i] >= 0) - sp_plaid.pix[i] = (SQUEEZE_MULT(sp_plaid.pix[i], *top_scale) - +sp_globals.pixrnd) & sp_globals.pixfix; - else - sp_plaid.pix[i] = (SQUEEZE_MULT(sp_plaid.pix[i], *bottom_scale) - +sp_globals.pixrnd) & sp_globals.pixfix; - } - } -return TRUE; -} -#endif - -#if INCL_RULES -FUNCTION static ufix8 FONTFAR *sp_setup_pix_table( - pointer, short_form, no_X_ctrl_zones, no_Y_ctrl_zones) -GDECL -ufix8 FONTFAR *pointer; /* Pointer to first byte in control zone table */ -boolean short_form; /* TRUE if 1 byte from/to specification */ -fix15 no_X_ctrl_zones; /* Number of X control zones */ -fix15 no_Y_ctrl_zones; /* Number of Y control zones */ -/* - * Called by plaid_tcb() to read the control zone table from the - * character data in the font. - * Sets up a table of pixel values for all controlled coordinates. - * Updates the pointer to the byte following the control zone - * data. - */ -{ -fix15 i, j, n; -fix31 ppo; -fix31 xppo0; /* top level pixels per oru */ -fix31 yppo0; /* top level pixels per oru */ -ufix8 edge_org; -ufix8 edge; -ufix8 start_edge; -ufix8 end_edge; -ufix16 constr_org; -fix15 constr_nr; -fix15 zone_pix; -fix31 whole_zone; /* non-transformed value of the first X zone */ -ufix16 tmpufix16; /* in extended mode, macro uses secnd term */ -#if INCL_SQUEEZING -fix31 x_scale; -fix31 y_top_scale, y_bottom_scale; -fix31 x_offset; -boolean squeezed_y; -fix15 setwidth_pix, em_top_pix, em_bot_pix; -#endif - -#if INCL_ISW -boolean imported_width; -fix31 isw_scale; -fix15 isw_setwidth_pix; -#endif - -#if INCL_ISW || INCL_SQUEEZING -boolean squeezed_x; -#endif - -#if INCL_PLAID_OUT /* Plaid data monitoring included? */ -begin_ctrl_zones(no_X_ctrl_zones, no_Y_ctrl_zones); -#endif - - -edge_org = 0; -constr_org = 0; -sp_globals.rnd_xmin = 0; /* initialize the error for chars with no zone */ -n = no_X_ctrl_zones; -ppo = sp_globals.tcb.xppo; -xppo0 = sp_globals.tcb0.xppo; -yppo0 = sp_globals.tcb0.yppo; -#if INCL_SQUEEZING || INCL_ISW -squeezed_x = FALSE; -#endif - -#if INCL_SQUEEZING -squeezed_x = calculate_x_scale (&x_scale, &x_offset, no_X_ctrl_zones); -squeezed_y = calculate_y_scale(&y_top_scale,&y_bottom_scale,(n+1), - no_Y_ctrl_zones); -#if INCL_ISW -if (sp_globals.import_setwidth_act == TRUE) -setwidth_pix = ((fix15)(((fix31)sp_globals.imported_width * xppo0) >> - sp_globals.mpshift) + sp_globals.pixrnd) & sp_globals.pixfix; - -else -#endif -setwidth_pix = ((fix15)(((fix31)sp_globals.setwidth_orus * xppo0) >> - sp_globals.mpshift) + sp_globals.pixrnd) & sp_globals.pixfix; -/* check for overflow */ -if (setwidth_pix < 0) - setwidth_pix = 0x7fff; /* set to maximum */ -em_bot_pix = ((fix15)(((fix31)EM_BOT * yppo0) >> - sp_globals.mpshift) + sp_globals.pixrnd) & sp_globals.pixfix; -em_top_pix = ((fix15)(((fix31)EM_TOP * yppo0) >> - sp_globals.mpshift) + sp_globals.pixrnd) & sp_globals.pixfix; -#endif - -#if INCL_ISW -/* convert to pixels */ -isw_setwidth_pix = ((fix15)(((fix31)sp_globals.imported_width * xppo0) >> - sp_globals.mpshift) + sp_globals.pixrnd) & sp_globals.pixfix; -/* check for overflow */ -if (isw_setwidth_pix < 0) - isw_setwidth_pix = 0x7fff; /* set to maximum */ -if (!squeezed_x && ((imported_width = sp_globals.import_setwidth_act) == TRUE)) - { - isw_scale = compute_isw_scale(); - - /* look for the first non-negative oru value, scale and add the offset */ - /* to the corresponding pixel value - note that the pixel value */ - /* is set in read_oru_table. */ - - /* look at all the X edges */ - for (i=0; i < (no_X_ctrl_zones+1); i++) - if (sp_plaid.orus[i] >= 0) - { - sp_plaid.pix[i] = (SQUEEZE_MULT(sp_plaid.pix[i], isw_scale) - +sp_globals.pixrnd) & sp_globals.pixfix; - break; - } - - } -#endif - -for (i = 0; ; i++) /* For X and Y control zones... */ - { - for (j = 0; j < n; j++) /* For each zone in X or Y... */ - { - if (short_form) /* 1 byte from/to specification? */ - { - edge = NEXT_BYTE(pointer); /* Read packed from/to spec */ - start_edge = edge_org + (edge & 0x0f); /* Extract start edge */ - end_edge = edge_org + (edge >> 4); /* Extract end edge */ - } - else /* 2 byte from/to specification? */ - { - start_edge = edge_org + NEXT_BYTE(pointer); /* Read start edge */ - end_edge = edge_org + NEXT_BYTE(pointer); /* read end edge */ - } - constr_nr = constr_org + - NEXT_BYTES(pointer, tmpufix16); /* Read constraint number */ -#if INCL_SQUEEZING - if (i == 0 && squeezed_x) - calculate_x_pix(start_edge, end_edge, constr_nr, - x_scale, x_offset, ppo, setwidth_pix); - else if (i == 1 && squeezed_y) - calculate_y_pix(start_edge, end_edge,constr_nr, - y_top_scale, y_bottom_scale, ppo, em_top_pix, em_bot_pix); - else - { -#endif -#if INCL_ISW - if (i==0 && imported_width) - calculate_x_pix(start_edge, end_edge, constr_nr, - isw_scale, 0, ppo, isw_setwidth_pix); - else - { -#endif - if (!sp_globals.c_act[constr_nr]) /* Constraint inactive? */ - { - zone_pix = ((fix15)((((fix31)sp_plaid.orus[end_edge] - - (fix31)sp_plaid.orus[start_edge]) * ppo) / - (1<= sp_globals.c_pix[constr_nr]) - goto L1; - } - zone_pix = sp_globals.c_pix[constr_nr]; /* Use zone size from constr table */ - if (start_edge > end_edge) /* sp_plaid.orus[start_edge] > sp_plaid.orus[end_edge]? */ - { - zone_pix = -zone_pix; /* Use negatve zone size */ - } - L1: - /* inter-character spacing fix */ - if ((j == 0) && (i == 0)) /* if this is the 1st X zone, save rounding error */ - { /* get the non-xformed - xformed zone, in right direction */ - whole_zone = (((fix31)sp_plaid.orus[end_edge] - - (fix31)sp_plaid.orus[start_edge]) * - ppo) / (1<flags & SQUEEZE_LEFT) && - (sp_plaid.pix[end_edge] < 0)) - sp_plaid.pix[end_edge] = 0; - if ((sp_globals.pspecs->flags & SQUEEZE_RIGHT) && - (sp_plaid.pix[end_edge] > setwidth_pix)) - sp_plaid.pix[end_edge] = setwidth_pix; - } - if (i == 1) /* in the y direction */ - { /* brute force squeeze */ - if ((sp_globals.pspecs->flags & SQUEEZE_TOP) && - (sp_plaid.pix[end_edge] > em_top_pix)) - sp_plaid.pix[end_edge] = em_top_pix; - if ((sp_globals.pspecs->flags & SQUEEZE_BOTTOM) && - (sp_plaid.pix[end_edge] < em_bot_pix)) - sp_plaid.pix[end_edge] = em_bot_pix; - } -#endif -#if INCL_SQUEEZING - } -#endif -#if INCL_ISW - } -#endif -#if INCL_PLAID_OUT /* Plaid data monitoring included? */ - record_ctrl_zone( - (fix31)sp_plaid.pix[start_edge] << (16 - sp_globals.pixshift), - (fix31)sp_plaid.pix[end_edge] << (16 - sp_globals.pixshift), - (fix15)(constr_nr - constr_org)); -#endif - } - if (i) /* Y pixels done? */ - break; - edge_org = sp_globals.Y_edge_org; /* Prepare to process Y ctrl zones */ - constr_org = sp_globals.Y_constr_org; - n = no_Y_ctrl_zones; - ppo = sp_globals.tcb.yppo; - } - -#if DEBUG -printf("\nX PIX TABLE\n"); -n = no_X_ctrl_zones + 1; -for (i = 0; i < n; i++) - printf("%2d %6.1f\n", i, (real)sp_plaid.pix[i] / (real)sp_globals.onepix); -printf("\nY PIX TABLE\n"); -n = no_Y_ctrl_zones + 1; -for (i = 0; i < n; i++) - { - j = i + no_X_ctrl_zones + 1; - printf("%2d %6.1f\n", i, (real)sp_plaid.pix[j] / (real)sp_globals.onepix); - } -#endif - -return pointer; -} -#endif - - -#if INCL_RULES -FUNCTION static ufix8 FONTFAR *sp_setup_int_table(pointer, no_X_int_zones, no_Y_int_zones) -GDECL -ufix8 FONTFAR *pointer; /* Pointer to first byte in interpolation zone table */ -fix15 no_X_int_zones; /* Number of X interpolation zones */ -fix15 no_Y_int_zones; /* Number of X interpolation zones */ -/* - * Called by plaid_tcb() to read the interpolation zone table from the - * character data in the font. - * Sets up a table of interpolation coefficients with one entry for - * every X or Y interpolation zone. - * Updates the pointer to the byte following the interpolation zone - * data. - */ -{ -fix15 i, j, k, l, n; -ufix8 format; -ufix8 format_copy; -ufix8 tmpufix8; -fix15 start_orus; -ufix8 edge_org; -ufix8 edge; -ufix16 adj_factor; -fix15 adj_orus; -fix15 end_orus; -fix31 zone_orus; -fix15 start_pix; -fix15 end_pix; - - -#if INCL_PLAID_OUT /* Plaid data monitoring included? */ -begin_int_zones(no_X_int_zones, no_Y_int_zones); -#endif - -i = 0; -edge_org = 0; -n = no_X_int_zones; -for (j = 0; ; j++) - { - for (k = 0; k < n; k++) - { - format = NEXT_BYTE(pointer); - if (format & BIT7) /* Short start/end point spec? */ - { - tmpufix8 = NEXT_BYTE(pointer); - edge = edge_org + (tmpufix8 & 0xf); - start_orus = sp_plaid.orus[edge]; - start_pix = sp_plaid.pix[edge]; - edge = edge_org + (tmpufix8 >> 4); - end_orus = sp_plaid.orus[edge]; - end_pix = sp_plaid.pix[edge]; - } - else /* Standard start and end point spec? */ - { - format_copy = format; - for (l = 0; ; l++) /* Loop for start and end point */ - { - switch (format_copy & 0x7) /* Decode start/end point format */ - { - - case 0: /* Index to control edge */ - edge = edge_org + NEXT_BYTE(pointer); - end_orus = sp_plaid.orus[edge]; - end_pix = sp_plaid.pix[edge]; - break; - - case 1: /* 1 byte fractional distance to next edge */ - adj_factor = 0xffff & NEXT_BYTE(pointer) << 8; - goto L1; - - - case 2: /* 2 byte fractional distance to next edge */ - adj_factor = 0xffff & NEXT_WORD(pointer); - L1: edge = edge_org + NEXT_BYTE(pointer); - end_orus = sp_plaid.orus[edge] + - ((((fix31)sp_plaid.orus[edge + 1] - (fix31)sp_plaid.orus[edge]) * - (ufix32)adj_factor + (fix31)32768) >> 16); - end_pix = sp_plaid.pix[edge] + - ((((fix31)sp_plaid.pix[edge + 1] - (fix31)sp_plaid.pix[edge]) * - (ufix32)adj_factor + (fix31)32768) >> 16); - break; - - case 3: /* 1 byte delta orus before first edge */ - adj_orus = -(fix15)NEXT_BYTE(pointer); - goto L2; - - case 4: /* 2 byte delta orus before first edge */ - adj_orus = -NEXT_WORD(pointer); - L2: edge = edge_org; - goto L4; - - case 5: /* 1 byte delta orus after last edge */ - adj_orus = (fix15)NEXT_BYTE(pointer); - goto L3; - - case 6: /* 2 byte delta orus after last edge */ - adj_orus = NEXT_WORD(pointer); - L3: edge = j? sp_globals.Y_edge_org + sp_globals.no_Y_orus - 1: sp_globals.no_X_orus - 1; - L4: end_orus = sp_plaid.orus[edge] + adj_orus; - end_pix = sp_plaid.pix[edge] + - (((fix31)adj_orus * (fix31)(j? sp_globals.tcb.yppo: sp_globals.tcb.xppo) + - sp_globals.mprnd) / (1<>= 3; /* Adj format to decode end point format */ - start_orus = end_orus; /* Save start point oru value */ - start_pix = end_pix; /* Save start point pixel value */ - } - } -#if INCL_PLAID_OUT /* Plaid data monitoring included? */ - record_int_zone( - (fix31)start_pix << (16 - sp_globals.pixshift), - (fix31)end_pix << (16 - sp_globals.pixshift)); -#endif - zone_orus = (fix31)end_orus - (fix31)start_orus; - sp_plaid.mult[i] = ((((fix31)end_pix - (fix31)start_pix) << sp_globals.mpshift) + - (zone_orus / 2)) / zone_orus; - sp_plaid.offset[i] = - (((((fix31)start_pix + (fix31)end_pix) << sp_globals.mpshift) - - ((fix31)sp_plaid.mult[i] * ((fix31)start_orus + (fix31)end_orus))) / 2) + - sp_globals.mprnd; - i++; - } - if (j) /* Finished? */ - break; - edge_org = sp_globals.Y_edge_org; /* Prepare to process Y ctrl zones */ - n = no_Y_int_zones; - } - -#if DEBUG -printf("\nX INT TABLE\n"); -n = no_X_int_zones; -for (i = 0; i < n; i++) - { - printf("%2d %7.4f %7.4f\n", i, - (real)sp_plaid.mult[i] / (real)(1 << sp_globals.multshift), - (real)sp_plaid.offset[i] / (real)(1 << sp_globals.multshift)); - } -printf("\nY INT TABLE\n"); -n = no_Y_int_zones; -for (i = 0; i < n; i++) - { - j = i + no_X_int_zones; - printf("%2d %7.4f %7.4f\n", i, - (real)sp_plaid.mult[j] / (real)(1 << sp_globals.multshift), - (real)sp_plaid.offset[j] / (real)(1 << sp_globals.multshift)); - } -#endif - -return pointer; -} -#endif -#if INCL_ISW -FUNCTION fix31 compute_isw_scale() -GDECL -{ -fix31 isw_scale; - -if (sp_globals.setwidth_orus == 0) - isw_scale = 0x00010000; -else - isw_scale = ((fix31)sp_globals.imported_width << 16)/ - (fix31)sp_globals.setwidth_orus; -return isw_scale; -} -#endif