1 /*****************************************************************************
2 * ratecontrol.c: ratecontrol
3 *****************************************************************************
4 * Copyright (C) 2005-2012 x264 project
6 * Authors: Loren Merritt <lorenm@u.washington.edu>
7 * Michael Niedermayer <michaelni@gmx.at>
8 * Gabriel Bouvigne <gabriel.bouvigne@joost.com>
9 * Fiona Glaser <fiona@x264.com>
10 * Måns Rullgård <mru@mru.ath.cx>
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02111, USA.
26 * This program is also available under a commercial proprietary license.
27 * For more information, contact us at licensing@x264.com.
28 *****************************************************************************/
30 #define _ISOC99_SOURCE
31 #undef NDEBUG // always check asserts, the speed effect is far too small to disable them
33 #include "common/common.h"
34 #include "ratecontrol.h"
46 uint64_t expected_bits; /*total expected bits up to the current frame (current one excluded)*/
53 float blurred_complexity;
56 int16_t i_weight_denom[2];
60 int64_t i_cpb_duration;
61 } ratecontrol_entry_t;
72 struct x264_ratecontrol_t
81 double rate_tolerance;
83 int nmb; /* number of macroblocks in a frame */
87 ratecontrol_entry_t *rce;
88 int qp; /* qp for current frame */
89 float qpm; /* qp for current macroblock: precise float for AQ */
90 float qpa_rc; /* average of macroblocks' qp before aq */
92 int qpa_aq; /* average of macroblocks' qp after aq */
94 float qp_novbv; /* QP for the current frame if 1-pass VBV was disabled. */
98 int64_t buffer_fill_final;
99 double buffer_fill; /* planned buffer, if all in-progress frames hit their bit budget */
100 double buffer_rate; /* # of bits added to buffer_fill after each frame */
101 double vbv_max_rate; /* # of bits added to buffer_fill per second */
102 predictor_t *pred; /* predict frame size from satd */
103 int single_frame_vbv;
104 double rate_factor_max_increment; /* Don't allow RF above (CRF + this value). */
109 double cplxr_sum; /* sum of bits*qscale/rceq */
110 double expected_bits_sum; /* sum of qscale2bits after rceq, ratefactor, and overflow, only includes finished frames */
111 int64_t filler_bits_sum; /* sum in bits of finished frames' filler data */
112 double wanted_bits_window; /* target bitrate * window */
114 double short_term_cplxsum;
115 double short_term_cplxcount;
116 double rate_factor_constant;
121 FILE *p_stat_file_out;
122 char *psz_stat_file_tmpname;
123 FILE *p_mbtree_stat_file_out;
124 char *psz_mbtree_stat_file_tmpname;
125 char *psz_mbtree_stat_file_name;
126 FILE *p_mbtree_stat_file_in;
128 int num_entries; /* number of ratecontrol_entry_ts */
129 ratecontrol_entry_t *entry; /* FIXME: copy needed data and free this once init is done */
131 double last_qscale_for[3]; /* last qscale for a specific pict type, used for max_diff & ipb factor stuff */
132 int last_non_b_pict_type;
133 double accum_p_qp; /* for determining I-frame quant */
135 double last_accum_p_norm;
136 double lmin[3]; /* min qscale by frame type */
138 double lstep; /* max change (multiply) in qscale per frame */
141 uint16_t *qp_buffer[2]; /* Global buffers for converting MB-tree quantizer data. */
142 int qpbuf_pos; /* In order to handle pyramid reordering, QP buffer acts as a stack.
143 * This value is the current position (0 or 1). */
148 float *scale_buffer[2]; /* Intermediate buffers */
149 int filtersize[2]; /* filter size (H/V) */
152 int srcdim[2]; /* Source dimensions (W/H) */
156 float frame_size_estimated; /* Access to this variable must be atomic: double is
157 * not atomic on all arches we care about */
158 double frame_size_maximum; /* Maximum frame size due to MinCR */
159 double frame_size_planned;
160 double slice_size_planned;
161 predictor_t (*row_pred)[2];
162 predictor_t row_preds[3][2];
163 predictor_t *pred_b_from_p; /* predict B-frame size from P-frame satd */
164 int bframes; /* # consecutive B-frames before this P-frame */
165 int bframe_bits; /* total cost of those frames */
169 x264_zone_t *prev_zone;
172 int initial_cpb_removal_delay;
173 int initial_cpb_removal_delay_offset;
174 double nrt_first_access_unit; /* nominal removal time */
175 double previous_cpb_final_arrival_time;
176 uint64_t hrd_multiply_denom;
180 static int parse_zones( x264_t *h );
181 static int init_pass2(x264_t *);
182 static float rate_estimate_qscale( x264_t *h );
183 static int update_vbv( x264_t *h, int bits );
184 static void update_vbv_plan( x264_t *h, int overhead );
185 static float predict_size( predictor_t *p, float q, float var );
186 static void update_predictor( predictor_t *p, float q, float var, float bits );
188 #define CMP_OPT_FIRST_PASS( opt, param_val )\
190 if( ( p = strstr( opts, opt "=" ) ) && sscanf( p, opt "=%d" , &i ) && param_val != i )\
192 x264_log( h, X264_LOG_ERROR, "different " opt " setting than first pass (%d vs %d)\n", param_val, i );\
198 * qp = h.264's quantizer
199 * qscale = linearized quantizer = Lagrange multiplier
201 static inline float qp2qscale( float qp )
203 return 0.85f * powf( 2.0f, ( qp - 12.0f ) / 6.0f );
205 static inline float qscale2qp( float qscale )
207 return 12.0f + 6.0f * log2f( qscale/0.85f );
210 /* Texture bitrate is not quite inversely proportional to qscale,
211 * probably due the the changing number of SKIP blocks.
212 * MV bits level off at about qp<=12, because the lambda used
213 * for motion estimation is constant there. */
214 static inline double qscale2bits( ratecontrol_entry_t *rce, double qscale )
218 return (rce->tex_bits + .1) * pow( rce->qscale / qscale, 1.1 )
219 + rce->mv_bits * pow( X264_MAX(rce->qscale, 1) / X264_MAX(qscale, 1), 0.5 )
223 static ALWAYS_INLINE uint32_t ac_energy_var( uint64_t sum_ssd, int shift, x264_frame_t *frame, int i, int b_store )
225 uint32_t sum = sum_ssd;
226 uint32_t ssd = sum_ssd >> 32;
229 frame->i_pixel_sum[i] += sum;
230 frame->i_pixel_ssd[i] += ssd;
232 return ssd - ((uint64_t)sum * sum >> shift);
235 static ALWAYS_INLINE uint32_t ac_energy_plane( x264_t *h, int mb_x, int mb_y, x264_frame_t *frame, int i, int b_chroma, int b_field, int b_store )
237 int height = b_chroma ? 16>>CHROMA_V_SHIFT : 16;
238 int stride = frame->i_stride[i];
240 ? 16 * mb_x + height * (mb_y&~1) * stride + (mb_y&1) * stride
241 : 16 * mb_x + height * mb_y * stride;
245 ALIGNED_ARRAY_16( pixel, pix,[FENC_STRIDE*16] );
246 int chromapix = h->luma2chroma_pixel[PIXEL_16x16];
247 int shift = 7 - CHROMA_V_SHIFT;
249 h->mc.load_deinterleave_chroma_fenc( pix, frame->plane[1] + offset, stride, height );
250 return ac_energy_var( h->pixf.var[chromapix]( pix, FENC_STRIDE ), shift, frame, 1, b_store )
251 + ac_energy_var( h->pixf.var[chromapix]( pix+FENC_STRIDE/2, FENC_STRIDE ), shift, frame, 2, b_store );
254 return ac_energy_var( h->pixf.var[PIXEL_16x16]( frame->plane[i] + offset, stride ), 8, frame, i, b_store );
257 // Find the total AC energy of the block in all planes.
258 static NOINLINE uint32_t x264_ac_energy_mb( x264_t *h, int mb_x, int mb_y, x264_frame_t *frame )
260 /* This function contains annoying hacks because GCC has a habit of reordering emms
261 * and putting it after floating point ops. As a result, we put the emms at the end of the
262 * function and make sure that its always called before the float math. Noinline makes
263 * sure no reordering goes on. */
265 x264_prefetch_fenc( h, frame, mb_x, mb_y );
266 if( h->mb.b_adaptive_mbaff )
268 /* We don't know the super-MB mode we're going to pick yet, so
269 * simply try both and pick the lower of the two. */
270 uint32_t var_interlaced, var_progressive;
271 var_interlaced = ac_energy_plane( h, mb_x, mb_y, frame, 0, 0, 1, 1 );
272 var_progressive = ac_energy_plane( h, mb_x, mb_y, frame, 0, 0, 0, 0 );
275 var_interlaced += ac_energy_plane( h, mb_x, mb_y, frame, 1, 0, 1, 1 );
276 var_progressive += ac_energy_plane( h, mb_x, mb_y, frame, 1, 0, 0, 0 );
277 var_interlaced += ac_energy_plane( h, mb_x, mb_y, frame, 2, 0, 1, 1 );
278 var_progressive += ac_energy_plane( h, mb_x, mb_y, frame, 2, 0, 0, 0 );
282 var_interlaced += ac_energy_plane( h, mb_x, mb_y, frame, 1, 1, 1, 1 );
283 var_progressive += ac_energy_plane( h, mb_x, mb_y, frame, 1, 1, 0, 0 );
285 var = X264_MIN( var_interlaced, var_progressive );
289 var = ac_energy_plane( h, mb_x, mb_y, frame, 0, 0, PARAM_INTERLACED, 1 );
292 var += ac_energy_plane( h, mb_x, mb_y, frame, 1, 0, PARAM_INTERLACED, 1 );
293 var += ac_energy_plane( h, mb_x, mb_y, frame, 2, 0, PARAM_INTERLACED, 1 );
296 var += ac_energy_plane( h, mb_x, mb_y, frame, 1, 1, PARAM_INTERLACED, 1 );
302 void x264_adaptive_quant_frame( x264_t *h, x264_frame_t *frame, float *quant_offsets )
304 /* constants chosen to result in approximately the same overall bitrate as without AQ.
305 * FIXME: while they're written in 5 significant digits, they're only tuned to 2. */
308 /* Initialize frame stats */
309 for( int i = 0; i < 3; i++ )
311 frame->i_pixel_sum[i] = 0;
312 frame->i_pixel_ssd[i] = 0;
315 /* Degenerate cases */
316 if( h->param.rc.i_aq_mode == X264_AQ_NONE || h->param.rc.f_aq_strength == 0 )
318 /* Need to init it anyways for MB tree */
319 if( h->param.rc.i_aq_mode && h->param.rc.f_aq_strength == 0 )
323 for( int mb_xy = 0; mb_xy < h->mb.i_mb_count; mb_xy++ )
324 frame->f_qp_offset[mb_xy] = frame->f_qp_offset_aq[mb_xy] = quant_offsets[mb_xy];
325 if( h->frames.b_have_lowres )
326 for( int mb_xy = 0; mb_xy < h->mb.i_mb_count; mb_xy++ )
327 frame->i_inv_qscale_factor[mb_xy] = x264_exp2fix8( frame->f_qp_offset[mb_xy] );
331 memset( frame->f_qp_offset, 0, h->mb.i_mb_count * sizeof(float) );
332 memset( frame->f_qp_offset_aq, 0, h->mb.i_mb_count * sizeof(float) );
333 if( h->frames.b_have_lowres )
334 for( int mb_xy = 0; mb_xy < h->mb.i_mb_count; mb_xy++ )
335 frame->i_inv_qscale_factor[mb_xy] = 256;
338 /* Need variance data for weighted prediction */
339 if( h->param.analyse.i_weighted_pred )
341 for( int mb_y = 0; mb_y < h->mb.i_mb_height; mb_y++ )
342 for( int mb_x = 0; mb_x < h->mb.i_mb_width; mb_x++ )
343 x264_ac_energy_mb( h, mb_x, mb_y, frame );
348 /* Actual adaptive quantization */
351 if( h->param.rc.i_aq_mode == X264_AQ_AUTOVARIANCE )
353 float bit_depth_correction = powf(1 << (BIT_DEPTH-8), 0.5f);
354 float avg_adj_pow2 = 0.f;
355 for( int mb_y = 0; mb_y < h->mb.i_mb_height; mb_y++ )
356 for( int mb_x = 0; mb_x < h->mb.i_mb_width; mb_x++ )
358 uint32_t energy = x264_ac_energy_mb( h, mb_x, mb_y, frame );
359 float qp_adj = powf( energy + 1, 0.125f );
360 frame->f_qp_offset[mb_x + mb_y*h->mb.i_mb_stride] = qp_adj;
362 avg_adj_pow2 += qp_adj * qp_adj;
364 avg_adj /= h->mb.i_mb_count;
365 avg_adj_pow2 /= h->mb.i_mb_count;
366 strength = h->param.rc.f_aq_strength * avg_adj / bit_depth_correction;
367 avg_adj = avg_adj - 0.5f * (avg_adj_pow2 - (14.f * bit_depth_correction)) / avg_adj;
370 strength = h->param.rc.f_aq_strength * 1.0397f;
372 for( int mb_y = 0; mb_y < h->mb.i_mb_height; mb_y++ )
373 for( int mb_x = 0; mb_x < h->mb.i_mb_width; mb_x++ )
376 int mb_xy = mb_x + mb_y*h->mb.i_mb_stride;
377 if( h->param.rc.i_aq_mode == X264_AQ_AUTOVARIANCE )
379 qp_adj = frame->f_qp_offset[mb_xy];
380 qp_adj = strength * (qp_adj - avg_adj);
384 uint32_t energy = x264_ac_energy_mb( h, mb_x, mb_y, frame );
385 qp_adj = strength * (x264_log2( X264_MAX(energy, 1) ) - (14.427f + 2*(BIT_DEPTH-8)));
388 qp_adj += quant_offsets[mb_xy];
389 frame->f_qp_offset[mb_xy] =
390 frame->f_qp_offset_aq[mb_xy] = qp_adj;
391 if( h->frames.b_have_lowres )
392 frame->i_inv_qscale_factor[mb_xy] = x264_exp2fix8(qp_adj);
396 /* Remove mean from SSD calculation */
397 for( int i = 0; i < 3; i++ )
399 uint64_t ssd = frame->i_pixel_ssd[i];
400 uint64_t sum = frame->i_pixel_sum[i];
401 int width = 16*h->mb.i_mb_width >> (i && CHROMA_H_SHIFT);
402 int height = 16*h->mb.i_mb_height >> (i && CHROMA_V_SHIFT);
403 frame->i_pixel_ssd[i] = ssd - (sum * sum + width * height / 2) / (width * height);
407 static int x264_macroblock_tree_rescale_init( x264_t *h, x264_ratecontrol_t *rc )
409 /* Use fractional QP array dimensions to compensate for edge padding */
410 float srcdim[2] = {rc->mbtree.srcdim[0] / 16.f, rc->mbtree.srcdim[1] / 16.f};
411 float dstdim[2] = { h->param.i_width / 16.f, h->param.i_height / 16.f};
412 int srcdimi[2] = {ceil(srcdim[0]), ceil(srcdim[1])};
413 int dstdimi[2] = {ceil(dstdim[0]), ceil(dstdim[1])};
414 if( PARAM_INTERLACED )
416 srcdimi[1] = (srcdimi[1]+1)&~1;
417 dstdimi[1] = (dstdimi[1]+1)&~1;
420 rc->mbtree.src_mb_count = srcdimi[0] * srcdimi[1];
422 CHECKED_MALLOC( rc->mbtree.qp_buffer[0], rc->mbtree.src_mb_count * sizeof(uint16_t) );
423 if( h->param.i_bframe_pyramid && h->param.rc.b_stat_read )
424 CHECKED_MALLOC( rc->mbtree.qp_buffer[1], rc->mbtree.src_mb_count * sizeof(uint16_t) );
425 rc->mbtree.qpbuf_pos = -1;
427 /* No rescaling to do */
428 if( srcdimi[0] == dstdimi[0] && srcdimi[1] == dstdimi[1] )
431 rc->mbtree.rescale_enabled = 1;
433 /* Allocate intermediate scaling buffers */
434 CHECKED_MALLOC( rc->mbtree.scale_buffer[0], srcdimi[0] * srcdimi[1] * sizeof(float) );
435 CHECKED_MALLOC( rc->mbtree.scale_buffer[1], dstdimi[0] * srcdimi[1] * sizeof(float) );
437 /* Allocate and calculate resize filter parameters and coefficients */
438 for( int i = 0; i < 2; i++ )
440 if( srcdim[i] > dstdim[i] ) // downscale
441 rc->mbtree.filtersize[i] = 1 + (2 * srcdimi[i] + dstdimi[i] - 1) / dstdimi[i];
443 rc->mbtree.filtersize[i] = 3;
445 CHECKED_MALLOC( rc->mbtree.coeffs[i], rc->mbtree.filtersize[i] * dstdimi[i] * sizeof(float) );
446 CHECKED_MALLOC( rc->mbtree.pos[i], dstdimi[i] * sizeof(int) );
448 /* Initialize filter coefficients */
449 float inc = srcdim[i] / dstdim[i];
450 float dmul = inc > 1.f ? dstdim[i] / srcdim[i] : 1.f;
451 float dstinsrc = 0.5f * inc - 0.5f;
452 int filtersize = rc->mbtree.filtersize[i];
453 for( int j = 0; j < dstdimi[i]; j++ )
455 int pos = dstinsrc - (filtersize - 2.f) * 0.5f;
457 rc->mbtree.pos[i][j] = pos;
458 for( int k = 0; k < filtersize; k++ )
460 float d = fabs( pos + k - dstinsrc ) * dmul;
461 float coeff = X264_MAX( 1.f - d, 0 );
462 rc->mbtree.coeffs[i][j * filtersize + k] = coeff;
466 for( int k = 0; k < filtersize; k++ )
467 rc->mbtree.coeffs[i][j * filtersize + k] *= sum;
472 /* Write back actual qp array dimensions */
473 rc->mbtree.srcdim[0] = srcdimi[0];
474 rc->mbtree.srcdim[1] = srcdimi[1];
480 static void x264_macroblock_tree_rescale_destroy( x264_ratecontrol_t *rc )
482 for( int i = 0; i < 2; i++ )
484 x264_free( rc->mbtree.qp_buffer[i] );
485 x264_free( rc->mbtree.scale_buffer[i] );
486 x264_free( rc->mbtree.coeffs[i] );
487 x264_free( rc->mbtree.pos[i] );
491 static ALWAYS_INLINE float tapfilter( float *src, int pos, int max, int stride, float *coeff, int filtersize )
494 for( int i = 0; i < filtersize; i++, pos++ )
495 sum += src[x264_clip3( pos, 0, max-1 )*stride] * coeff[i];
499 static void x264_macroblock_tree_rescale( x264_t *h, x264_ratecontrol_t *rc, float *dst )
501 float *input, *output;
502 int filtersize, stride, height;
505 input = rc->mbtree.scale_buffer[0];
506 output = rc->mbtree.scale_buffer[1];
507 filtersize = rc->mbtree.filtersize[0];
508 stride = rc->mbtree.srcdim[0];
509 height = rc->mbtree.srcdim[1];
510 for( int y = 0; y < height; y++, input += stride, output += h->mb.i_mb_width )
512 float *coeff = rc->mbtree.coeffs[0];
513 for( int x = 0; x < h->mb.i_mb_width; x++, coeff+=filtersize )
514 output[x] = tapfilter( input, rc->mbtree.pos[0][x], stride, 1, coeff, filtersize );
518 input = rc->mbtree.scale_buffer[1];
520 filtersize = rc->mbtree.filtersize[1];
521 stride = h->mb.i_mb_width;
522 height = rc->mbtree.srcdim[1];
523 for( int x = 0; x < h->mb.i_mb_width; x++, input++, output++ )
525 float *coeff = rc->mbtree.coeffs[1];
526 for( int y = 0; y < h->mb.i_mb_height; y++, coeff+=filtersize )
527 output[y*stride] = tapfilter( input, rc->mbtree.pos[1][y], height, stride, coeff, filtersize );
531 int x264_macroblock_tree_read( x264_t *h, x264_frame_t *frame, float *quant_offsets )
533 x264_ratecontrol_t *rc = h->rc;
534 uint8_t i_type_actual = rc->entry[frame->i_frame].pict_type;
536 if( rc->entry[frame->i_frame].kept_as_ref )
539 if( rc->mbtree.qpbuf_pos < 0 )
543 rc->mbtree.qpbuf_pos++;
545 if( !fread( &i_type, 1, 1, rc->p_mbtree_stat_file_in ) )
547 if( fread( rc->mbtree.qp_buffer[rc->mbtree.qpbuf_pos], sizeof(uint16_t), rc->mbtree.src_mb_count, rc->p_mbtree_stat_file_in ) != rc->mbtree.src_mb_count )
550 if( i_type != i_type_actual && rc->mbtree.qpbuf_pos == 1 )
552 x264_log( h, X264_LOG_ERROR, "MB-tree frametype %d doesn't match actual frametype %d.\n", i_type, i_type_actual );
555 } while( i_type != i_type_actual );
558 float *dst = rc->mbtree.rescale_enabled ? rc->mbtree.scale_buffer[0] : frame->f_qp_offset;
559 for( int i = 0; i < rc->mbtree.src_mb_count; i++ )
561 int16_t qp_fix8 = endian_fix16( rc->mbtree.qp_buffer[rc->mbtree.qpbuf_pos][i] );
562 dst[i] = qp_fix8 * (1.f/256.f);
564 if( rc->mbtree.rescale_enabled )
565 x264_macroblock_tree_rescale( h, rc, frame->f_qp_offset );
566 if( h->frames.b_have_lowres )
567 for( int i = 0; i < h->mb.i_mb_count; i++ )
568 frame->i_inv_qscale_factor[i] = x264_exp2fix8( frame->f_qp_offset[i] );
569 rc->mbtree.qpbuf_pos--;
572 x264_stack_align( x264_adaptive_quant_frame, h, frame, quant_offsets );
575 x264_log( h, X264_LOG_ERROR, "Incomplete MB-tree stats file.\n" );
579 int x264_reference_build_list_optimal( x264_t *h )
581 ratecontrol_entry_t *rce = h->rc->rce;
582 x264_frame_t *frames[16];
583 x264_weight_t weights[16][3];
586 if( rce->refs != h->i_ref[0] )
589 memcpy( frames, h->fref[0], sizeof(frames) );
590 memcpy( refcount, rce->refcount, sizeof(refcount) );
591 memcpy( weights, h->fenc->weight, sizeof(weights) );
592 memset( &h->fenc->weight[1][0], 0, sizeof(x264_weight_t[15][3]) );
594 /* For now don't reorder ref 0; it seems to lower quality
595 in most cases due to skips. */
596 for( int ref = 1; ref < h->i_ref[0]; ref++ )
601 for( int i = 1; i < h->i_ref[0]; i++ )
602 /* Favor lower POC as a tiebreaker. */
603 COPY2_IF_GT( max, refcount[i], bestref, i );
605 /* FIXME: If there are duplicates from frames other than ref0 then it is possible
606 * that the optimal ordering doesnt place every duplicate. */
608 refcount[bestref] = -1;
609 h->fref[0][ref] = frames[bestref];
610 memcpy( h->fenc->weight[ref], weights[bestref], sizeof(weights[bestref]) );
616 static char *x264_strcat_filename( char *input, char *suffix )
618 char *output = x264_malloc( strlen( input ) + strlen( suffix ) + 1 );
621 strcpy( output, input );
622 strcat( output, suffix );
626 void x264_ratecontrol_init_reconfigurable( x264_t *h, int b_init )
628 x264_ratecontrol_t *rc = h->rc;
629 if( !b_init && rc->b_2pass )
632 if( h->param.rc.i_rc_method == X264_RC_CRF )
634 /* Arbitrary rescaling to make CRF somewhat similar to QP.
635 * Try to compensate for MB-tree's effects as well. */
636 double base_cplx = h->mb.i_mb_count * (h->param.i_bframe ? 120 : 80);
637 double mbtree_offset = h->param.rc.b_mb_tree ? (1.0-h->param.rc.f_qcompress)*13.5 : 0;
638 rc->rate_factor_constant = pow( base_cplx, 1 - rc->qcompress )
639 / qp2qscale( h->param.rc.f_rf_constant + mbtree_offset + QP_BD_OFFSET );
642 if( h->param.rc.i_vbv_max_bitrate > 0 && h->param.rc.i_vbv_buffer_size > 0 )
644 /* We don't support changing the ABR bitrate right now,
645 so if the stream starts as CBR, keep it CBR. */
646 if( rc->b_vbv_min_rate )
647 h->param.rc.i_vbv_max_bitrate = h->param.rc.i_bitrate;
649 if( h->param.rc.i_vbv_buffer_size < (int)(h->param.rc.i_vbv_max_bitrate / rc->fps) )
651 h->param.rc.i_vbv_buffer_size = h->param.rc.i_vbv_max_bitrate / rc->fps;
652 x264_log( h, X264_LOG_WARNING, "VBV buffer size cannot be smaller than one frame, using %d kbit\n",
653 h->param.rc.i_vbv_buffer_size );
656 int vbv_buffer_size = h->param.rc.i_vbv_buffer_size * 1000;
657 int vbv_max_bitrate = h->param.rc.i_vbv_max_bitrate * 1000;
660 if( h->param.i_nal_hrd && b_init )
662 h->sps->vui.hrd.i_cpb_cnt = 1;
663 h->sps->vui.hrd.b_cbr_hrd = h->param.i_nal_hrd == X264_NAL_HRD_CBR;
664 h->sps->vui.hrd.i_time_offset_length = 0;
669 int bitrate = 1000*h->param.rc.i_vbv_max_bitrate;
670 int bufsize = 1000*h->param.rc.i_vbv_buffer_size;
672 // normalize HRD size and rate to the value / scale notation
673 h->sps->vui.hrd.i_bit_rate_scale = x264_clip3( x264_ctz( bitrate ) - BR_SHIFT, 0, 15 );
674 h->sps->vui.hrd.i_bit_rate_value = bitrate >> ( h->sps->vui.hrd.i_bit_rate_scale + BR_SHIFT );
675 h->sps->vui.hrd.i_bit_rate_unscaled = h->sps->vui.hrd.i_bit_rate_value << ( h->sps->vui.hrd.i_bit_rate_scale + BR_SHIFT );
676 h->sps->vui.hrd.i_cpb_size_scale = x264_clip3( x264_ctz( bufsize ) - CPB_SHIFT, 0, 15 );
677 h->sps->vui.hrd.i_cpb_size_value = bufsize >> ( h->sps->vui.hrd.i_cpb_size_scale + CPB_SHIFT );
678 h->sps->vui.hrd.i_cpb_size_unscaled = h->sps->vui.hrd.i_cpb_size_value << ( h->sps->vui.hrd.i_cpb_size_scale + CPB_SHIFT );
684 #define MAX_DURATION 0.5
686 int max_cpb_output_delay = X264_MIN( h->param.i_keyint_max * MAX_DURATION * h->sps->vui.i_time_scale / h->sps->vui.i_num_units_in_tick, INT_MAX );
687 int max_dpb_output_delay = h->sps->vui.i_max_dec_frame_buffering * MAX_DURATION * h->sps->vui.i_time_scale / h->sps->vui.i_num_units_in_tick;
688 int max_delay = (int)(90000.0 * (double)h->sps->vui.hrd.i_cpb_size_unscaled / h->sps->vui.hrd.i_bit_rate_unscaled + 0.5);
690 h->sps->vui.hrd.i_initial_cpb_removal_delay_length = 2 + x264_clip3( 32 - x264_clz( max_delay ), 4, 22 );
691 h->sps->vui.hrd.i_cpb_removal_delay_length = x264_clip3( 32 - x264_clz( max_cpb_output_delay ), 4, 31 );
692 h->sps->vui.hrd.i_dpb_output_delay_length = x264_clip3( 32 - x264_clz( max_dpb_output_delay ), 4, 31 );
696 vbv_buffer_size = h->sps->vui.hrd.i_cpb_size_unscaled;
697 vbv_max_bitrate = h->sps->vui.hrd.i_bit_rate_unscaled;
699 else if( h->param.i_nal_hrd && !b_init )
701 x264_log( h, X264_LOG_WARNING, "VBV parameters cannot be changed when NAL HRD is in use\n" );
704 h->sps->vui.hrd.i_bit_rate_unscaled = vbv_max_bitrate;
705 h->sps->vui.hrd.i_cpb_size_unscaled = vbv_buffer_size;
707 if( rc->b_vbv_min_rate )
708 rc->bitrate = h->param.rc.i_bitrate * 1000.;
709 rc->buffer_rate = vbv_max_bitrate / rc->fps;
710 rc->vbv_max_rate = vbv_max_bitrate;
711 rc->buffer_size = vbv_buffer_size;
712 rc->single_frame_vbv = rc->buffer_rate * 1.1 > rc->buffer_size;
713 rc->cbr_decay = 1.0 - rc->buffer_rate / rc->buffer_size
714 * 0.5 * X264_MAX(0, 1.5 - rc->buffer_rate * rc->fps / rc->bitrate);
715 if( h->param.rc.i_rc_method == X264_RC_CRF && h->param.rc.f_rf_constant_max )
717 rc->rate_factor_max_increment = h->param.rc.f_rf_constant_max - h->param.rc.f_rf_constant;
718 if( rc->rate_factor_max_increment <= 0 )
720 x264_log( h, X264_LOG_WARNING, "CRF max must be greater than CRF\n" );
721 rc->rate_factor_max_increment = 0;
726 if( h->param.rc.f_vbv_buffer_init > 1. )
727 h->param.rc.f_vbv_buffer_init = x264_clip3f( h->param.rc.f_vbv_buffer_init / h->param.rc.i_vbv_buffer_size, 0, 1 );
728 h->param.rc.f_vbv_buffer_init = x264_clip3f( X264_MAX( h->param.rc.f_vbv_buffer_init, rc->buffer_rate / rc->buffer_size ), 0, 1);
729 rc->buffer_fill_final = rc->buffer_size * h->param.rc.f_vbv_buffer_init * h->sps->vui.i_time_scale;
731 rc->b_vbv_min_rate = !rc->b_2pass
732 && h->param.rc.i_rc_method == X264_RC_ABR
733 && h->param.rc.i_vbv_max_bitrate <= h->param.rc.i_bitrate;
738 int x264_ratecontrol_new( x264_t *h )
740 x264_ratecontrol_t *rc;
744 CHECKED_MALLOCZERO( h->rc, h->param.i_threads * sizeof(x264_ratecontrol_t) );
747 rc->b_abr = h->param.rc.i_rc_method != X264_RC_CQP && !h->param.rc.b_stat_read;
748 rc->b_2pass = h->param.rc.i_rc_method == X264_RC_ABR && h->param.rc.b_stat_read;
750 /* FIXME: use integers */
751 if( h->param.i_fps_num > 0 && h->param.i_fps_den > 0 )
752 rc->fps = (float) h->param.i_fps_num / h->param.i_fps_den;
756 if( h->param.rc.b_mb_tree )
758 h->param.rc.f_pb_factor = 1;
762 rc->qcompress = h->param.rc.f_qcompress;
764 rc->bitrate = h->param.rc.i_bitrate * 1000.;
765 rc->rate_tolerance = h->param.rc.f_rate_tolerance;
766 rc->nmb = h->mb.i_mb_count;
767 rc->last_non_b_pict_type = -1;
770 if( h->param.rc.i_rc_method == X264_RC_CRF && h->param.rc.b_stat_read )
772 x264_log( h, X264_LOG_ERROR, "constant rate-factor is incompatible with 2pass.\n" );
776 x264_ratecontrol_init_reconfigurable( h, 1 );
778 if( h->param.i_nal_hrd )
780 uint64_t denom = (uint64_t)h->sps->vui.hrd.i_bit_rate_unscaled * h->sps->vui.i_time_scale;
781 uint64_t num = 180000;
782 x264_reduce_fraction64( &num, &denom );
783 rc->hrd_multiply_denom = 180000 / num;
785 double bits_required = log2( 180000 / rc->hrd_multiply_denom )
786 + log2( h->sps->vui.i_time_scale )
787 + log2( h->sps->vui.hrd.i_cpb_size_unscaled );
788 if( bits_required >= 63 )
790 x264_log( h, X264_LOG_ERROR, "HRD with very large timescale and bufsize not supported\n" );
795 if( rc->rate_tolerance < 0.01 )
797 x264_log( h, X264_LOG_WARNING, "bitrate tolerance too small, using .01\n" );
798 rc->rate_tolerance = 0.01;
801 h->mb.b_variable_qp = rc->b_vbv || h->param.rc.i_aq_mode;
805 /* FIXME ABR_INIT_QP is actually used only in CRF */
806 #define ABR_INIT_QP (( h->param.rc.i_rc_method == X264_RC_CRF ? h->param.rc.f_rf_constant : 24 ) + QP_BD_OFFSET)
807 rc->accum_p_norm = .01;
808 rc->accum_p_qp = ABR_INIT_QP * rc->accum_p_norm;
809 /* estimated ratio that produces a reasonable QP for the first I-frame */
810 rc->cplxr_sum = .01 * pow( 7.0e5, rc->qcompress ) * pow( h->mb.i_mb_count, 0.5 );
811 rc->wanted_bits_window = 1.0 * rc->bitrate / rc->fps;
812 rc->last_non_b_pict_type = SLICE_TYPE_I;
815 rc->ip_offset = 6.0 * log2f( h->param.rc.f_ip_factor );
816 rc->pb_offset = 6.0 * log2f( h->param.rc.f_pb_factor );
817 rc->qp_constant[SLICE_TYPE_P] = h->param.rc.i_qp_constant;
818 rc->qp_constant[SLICE_TYPE_I] = x264_clip3( h->param.rc.i_qp_constant - rc->ip_offset + 0.5, 0, QP_MAX );
819 rc->qp_constant[SLICE_TYPE_B] = x264_clip3( h->param.rc.i_qp_constant + rc->pb_offset + 0.5, 0, QP_MAX );
820 h->mb.ip_offset = rc->ip_offset + 0.5;
822 rc->lstep = pow( 2, h->param.rc.i_qp_step / 6.0 );
823 rc->last_qscale = qp2qscale( 26 );
824 int num_preds = h->param.b_sliced_threads * h->param.i_threads + 1;
825 CHECKED_MALLOC( rc->pred, 5 * sizeof(predictor_t) * num_preds );
826 CHECKED_MALLOC( rc->pred_b_from_p, sizeof(predictor_t) );
827 for( int i = 0; i < 3; i++ )
829 rc->last_qscale_for[i] = qp2qscale( ABR_INIT_QP );
830 rc->lmin[i] = qp2qscale( h->param.rc.i_qp_min );
831 rc->lmax[i] = qp2qscale( h->param.rc.i_qp_max );
832 for( int j = 0; j < num_preds; j++ )
834 rc->pred[i+j*5].coeff_min = 2.0 / 4;
835 rc->pred[i+j*5].coeff = 2.0;
836 rc->pred[i+j*5].count = 1.0;
837 rc->pred[i+j*5].decay = 0.5;
838 rc->pred[i+j*5].offset = 0.0;
840 for( int j = 0; j < 2; j++ )
842 rc->row_preds[i][j].coeff_min = .25 / 4;
843 rc->row_preds[i][j].coeff = .25;
844 rc->row_preds[i][j].count = 1.0;
845 rc->row_preds[i][j].decay = 0.5;
846 rc->row_preds[i][j].offset = 0.0;
849 *rc->pred_b_from_p = rc->pred[0];
851 if( parse_zones( h ) < 0 )
853 x264_log( h, X264_LOG_ERROR, "failed to parse zones\n" );
857 /* Load stat file and init 2pass algo */
858 if( h->param.rc.b_stat_read )
860 char *p, *stats_in, *stats_buf;
862 /* read 1st pass stats */
863 assert( h->param.rc.psz_stat_in );
864 stats_buf = stats_in = x264_slurp_file( h->param.rc.psz_stat_in );
867 x264_log( h, X264_LOG_ERROR, "ratecontrol_init: can't open stats file\n" );
870 if( h->param.rc.b_mb_tree )
872 char *mbtree_stats_in = x264_strcat_filename( h->param.rc.psz_stat_in, ".mbtree" );
873 if( !mbtree_stats_in )
875 rc->p_mbtree_stat_file_in = fopen( mbtree_stats_in, "rb" );
876 x264_free( mbtree_stats_in );
877 if( !rc->p_mbtree_stat_file_in )
879 x264_log( h, X264_LOG_ERROR, "ratecontrol_init: can't open mbtree stats file\n" );
884 /* check whether 1st pass options were compatible with current options */
885 if( strncmp( stats_buf, "#options:", 9 ) )
887 x264_log( h, X264_LOG_ERROR, "options list in stats file not valid\n" );
891 float res_factor, res_factor_bits;
895 char *opts = stats_buf;
896 stats_in = strchr( stats_buf, '\n' );
901 if( sscanf( opts, "#options: %dx%d", &i, &j ) != 2 )
903 x264_log( h, X264_LOG_ERROR, "resolution specified in stats file not valid\n" );
906 else if( h->param.rc.b_mb_tree )
908 rc->mbtree.srcdim[0] = i;
909 rc->mbtree.srcdim[1] = j;
911 res_factor = (float)h->param.i_width * h->param.i_height / (i*j);
912 /* Change in bits relative to resolution isn't quite linear on typical sources,
913 * so we'll at least try to roughly approximate this effect. */
914 res_factor_bits = powf( res_factor, 0.7 );
916 if( ( p = strstr( opts, "timebase=" ) ) && sscanf( p, "timebase=%u/%u", &k, &l ) != 2 )
918 x264_log( h, X264_LOG_ERROR, "timebase specified in stats file not valid\n" );
921 if( k != h->param.i_timebase_num || l != h->param.i_timebase_den )
923 x264_log( h, X264_LOG_ERROR, "timebase mismatch with 1st pass (%u/%u vs %u/%u)\n",
924 h->param.i_timebase_num, h->param.i_timebase_den, k, l );
928 CMP_OPT_FIRST_PASS( "bitdepth", BIT_DEPTH );
929 CMP_OPT_FIRST_PASS( "weightp", X264_MAX( 0, h->param.analyse.i_weighted_pred ) );
930 CMP_OPT_FIRST_PASS( "bframes", h->param.i_bframe );
931 CMP_OPT_FIRST_PASS( "b_pyramid", h->param.i_bframe_pyramid );
932 CMP_OPT_FIRST_PASS( "intra_refresh", h->param.b_intra_refresh );
933 CMP_OPT_FIRST_PASS( "open_gop", h->param.b_open_gop );
934 CMP_OPT_FIRST_PASS( "bluray_compat", h->param.b_bluray_compat );
936 if( (p = strstr( opts, "interlaced=" )) )
938 char *current = h->param.b_interlaced ? h->param.b_tff ? "tff" : "bff" : h->param.b_fake_interlaced ? "fake" : "0";
940 sscanf( p, "interlaced=%4s", buf );
941 if( strcmp( current, buf ) )
943 x264_log( h, X264_LOG_ERROR, "different interlaced setting than first pass (%s vs %s)\n", current, buf );
948 if( (p = strstr( opts, "keyint=" )) )
951 char buf[13] = "infinite ";
952 if( h->param.i_keyint_max != X264_KEYINT_MAX_INFINITE )
953 sprintf( buf, "%d ", h->param.i_keyint_max );
954 if( strncmp( p, buf, strlen(buf) ) )
956 x264_log( h, X264_LOG_ERROR, "different keyint setting than first pass (%.*s vs %.*s)\n",
957 strlen(buf)-1, buf, strcspn(p, " "), p );
962 if( strstr( opts, "qp=0" ) && h->param.rc.i_rc_method == X264_RC_ABR )
963 x264_log( h, X264_LOG_WARNING, "1st pass was lossless, bitrate prediction will be inaccurate\n" );
965 if( !strstr( opts, "direct=3" ) && h->param.analyse.i_direct_mv_pred == X264_DIRECT_PRED_AUTO )
967 x264_log( h, X264_LOG_WARNING, "direct=auto not used on the first pass\n" );
968 h->mb.b_direct_auto_write = 1;
971 if( ( p = strstr( opts, "b_adapt=" ) ) && sscanf( p, "b_adapt=%d", &i ) && i >= X264_B_ADAPT_NONE && i <= X264_B_ADAPT_TRELLIS )
972 h->param.i_bframe_adaptive = i;
973 else if( h->param.i_bframe )
975 x264_log( h, X264_LOG_ERROR, "b_adapt method specified in stats file not valid\n" );
979 if( (h->param.rc.b_mb_tree || h->param.rc.i_vbv_buffer_size) && ( p = strstr( opts, "rc_lookahead=" ) ) && sscanf( p, "rc_lookahead=%d", &i ) )
980 h->param.rc.i_lookahead = i;
983 /* find number of pics */
986 for( num_entries = -1; p; num_entries++ )
987 p = strchr( p + 1, ';' );
990 x264_log( h, X264_LOG_ERROR, "empty stats file\n" );
993 rc->num_entries = num_entries;
995 if( h->param.i_frame_total < rc->num_entries && h->param.i_frame_total > 0 )
997 x264_log( h, X264_LOG_WARNING, "2nd pass has fewer frames than 1st pass (%d vs %d)\n",
998 h->param.i_frame_total, rc->num_entries );
1000 if( h->param.i_frame_total > rc->num_entries )
1002 x264_log( h, X264_LOG_ERROR, "2nd pass has more frames than 1st pass (%d vs %d)\n",
1003 h->param.i_frame_total, rc->num_entries );
1007 CHECKED_MALLOCZERO( rc->entry, rc->num_entries * sizeof(ratecontrol_entry_t) );
1009 /* init all to skipped p frames */
1010 for( int i = 0; i < rc->num_entries; i++ )
1012 ratecontrol_entry_t *rce = &rc->entry[i];
1013 rce->pict_type = SLICE_TYPE_P;
1014 rce->qscale = rce->new_qscale = qp2qscale( 20 );
1015 rce->misc_bits = rc->nmb + 10;
1021 for( int i = 0; i < rc->num_entries; i++ )
1023 ratecontrol_entry_t *rce;
1031 next= strchr(p, ';');
1033 *next++ = 0; //sscanf is unbelievably slow on long strings
1034 e = sscanf( p, " in:%d ", &frame_number );
1036 if( frame_number < 0 || frame_number >= rc->num_entries )
1038 x264_log( h, X264_LOG_ERROR, "bad frame number (%d) at stats line %d\n", frame_number, i );
1041 rce = &rc->entry[frame_number];
1042 rce->direct_mode = 0;
1044 e += sscanf( p, " in:%*d out:%*d type:%c dur:%"SCNd64" cpbdur:%"SCNd64" q:%f tex:%d mv:%d misc:%d imb:%d pmb:%d smb:%d d:%c",
1045 &pict_type, &rce->i_duration, &rce->i_cpb_duration, &qp, &rce->tex_bits,
1046 &rce->mv_bits, &rce->misc_bits, &rce->i_count, &rce->p_count,
1047 &rce->s_count, &rce->direct_mode );
1048 rce->tex_bits *= res_factor_bits;
1049 rce->mv_bits *= res_factor_bits;
1050 rce->misc_bits *= res_factor_bits;
1051 rce->i_count *= res_factor;
1052 rce->p_count *= res_factor;
1053 rce->s_count *= res_factor;
1055 p = strstr( p, "ref:" );
1059 for( ref = 0; ref < 16; ref++ )
1061 if( sscanf( p, " %d", &rce->refcount[ref] ) != 1 )
1063 p = strchr( p+1, ' ' );
1070 rce->i_weight_denom[0] = rce->i_weight_denom[1] = -1;
1071 char *w = strchr( p, 'w' );
1074 int count = sscanf( w, "w:%hd,%hd,%hd,%hd,%hd,%hd,%hd,%hd",
1075 &rce->i_weight_denom[0], &rce->weight[0][0], &rce->weight[0][1],
1076 &rce->i_weight_denom[1], &rce->weight[1][0], &rce->weight[1][1],
1077 &rce->weight[2][0], &rce->weight[2][1] );
1079 rce->i_weight_denom[1] = -1;
1080 else if ( count != 8 )
1081 rce->i_weight_denom[0] = rce->i_weight_denom[1] = -1;
1084 if( pict_type != 'b' )
1085 rce->kept_as_ref = 1;
1089 rce->frame_type = X264_TYPE_IDR;
1090 rce->pict_type = SLICE_TYPE_I;
1093 rce->frame_type = X264_TYPE_I;
1094 rce->pict_type = SLICE_TYPE_I;
1097 rce->frame_type = X264_TYPE_P;
1098 rce->pict_type = SLICE_TYPE_P;
1101 rce->frame_type = X264_TYPE_BREF;
1102 rce->pict_type = SLICE_TYPE_B;
1105 rce->frame_type = X264_TYPE_B;
1106 rce->pict_type = SLICE_TYPE_B;
1108 default: e = -1; break;
1113 x264_log( h, X264_LOG_ERROR, "statistics are damaged at line %d, parser out=%d\n", i, e );
1116 rce->qscale = qp2qscale( qp );
1120 x264_free( stats_buf );
1122 if( h->param.rc.i_rc_method == X264_RC_ABR )
1124 if( init_pass2( h ) < 0 )
1126 } /* else we're using constant quant, so no need to run the bitrate allocation */
1129 /* Open output file */
1130 /* If input and output files are the same, output to a temp file
1131 * and move it to the real name only when it's complete */
1132 if( h->param.rc.b_stat_write )
1135 rc->psz_stat_file_tmpname = x264_strcat_filename( h->param.rc.psz_stat_out, ".temp" );
1136 if( !rc->psz_stat_file_tmpname )
1139 rc->p_stat_file_out = fopen( rc->psz_stat_file_tmpname, "wb" );
1140 if( rc->p_stat_file_out == NULL )
1142 x264_log( h, X264_LOG_ERROR, "ratecontrol_init: can't open stats file\n" );
1146 p = x264_param2string( &h->param, 1 );
1148 fprintf( rc->p_stat_file_out, "#options: %s\n", p );
1150 if( h->param.rc.b_mb_tree && !h->param.rc.b_stat_read )
1152 rc->psz_mbtree_stat_file_tmpname = x264_strcat_filename( h->param.rc.psz_stat_out, ".mbtree.temp" );
1153 rc->psz_mbtree_stat_file_name = x264_strcat_filename( h->param.rc.psz_stat_out, ".mbtree" );
1154 if( !rc->psz_mbtree_stat_file_tmpname || !rc->psz_mbtree_stat_file_name )
1157 rc->p_mbtree_stat_file_out = fopen( rc->psz_mbtree_stat_file_tmpname, "wb" );
1158 if( rc->p_mbtree_stat_file_out == NULL )
1160 x264_log( h, X264_LOG_ERROR, "ratecontrol_init: can't open mbtree stats file\n" );
1166 if( h->param.rc.b_mb_tree && (h->param.rc.b_stat_read || h->param.rc.b_stat_write) )
1168 if( !h->param.rc.b_stat_read )
1170 rc->mbtree.srcdim[0] = h->param.i_width;
1171 rc->mbtree.srcdim[1] = h->param.i_height;
1173 if( x264_macroblock_tree_rescale_init( h, rc ) < 0 )
1177 for( int i = 0; i<h->param.i_threads; i++ )
1179 h->thread[i]->rc = rc+i;
1183 h->thread[i]->param = h->param;
1184 h->thread[i]->mb.b_variable_qp = h->mb.b_variable_qp;
1185 h->thread[i]->mb.ip_offset = h->mb.ip_offset;
1194 static int parse_zone( x264_t *h, x264_zone_t *z, char *p )
1197 char *tok, UNUSED *saveptr=NULL;
1199 z->f_bitrate_factor = 1;
1200 if( 3 <= sscanf(p, "%d,%d,q=%d%n", &z->i_start, &z->i_end, &z->i_qp, &len) )
1202 else if( 3 <= sscanf(p, "%d,%d,b=%f%n", &z->i_start, &z->i_end, &z->f_bitrate_factor, &len) )
1204 else if( 2 <= sscanf(p, "%d,%d%n", &z->i_start, &z->i_end, &len) )
1208 x264_log( h, X264_LOG_ERROR, "invalid zone: \"%s\"\n", p );
1214 CHECKED_MALLOC( z->param, sizeof(x264_param_t) );
1215 memcpy( z->param, &h->param, sizeof(x264_param_t) );
1216 z->param->param_free = x264_free;
1217 while( (tok = strtok_r( p, ",", &saveptr )) )
1219 char *val = strchr( tok, '=' );
1225 if( x264_param_parse( z->param, tok, val ) )
1227 x264_log( h, X264_LOG_ERROR, "invalid zone param: %s = %s\n", tok, val );
1237 static int parse_zones( x264_t *h )
1239 x264_ratecontrol_t *rc = h->rc;
1240 if( h->param.rc.psz_zones && !h->param.rc.i_zones )
1242 char *psz_zones, *p;
1243 CHECKED_MALLOC( psz_zones, strlen( h->param.rc.psz_zones )+1 );
1244 strcpy( psz_zones, h->param.rc.psz_zones );
1245 h->param.rc.i_zones = 1;
1246 for( p = psz_zones; *p; p++ )
1247 h->param.rc.i_zones += (*p == '/');
1248 CHECKED_MALLOC( h->param.rc.zones, h->param.rc.i_zones * sizeof(x264_zone_t) );
1250 for( int i = 0; i < h->param.rc.i_zones; i++ )
1252 int i_tok = strcspn( p, "/" );
1254 if( parse_zone( h, &h->param.rc.zones[i], p ) )
1258 x264_free( psz_zones );
1261 if( h->param.rc.i_zones > 0 )
1263 for( int i = 0; i < h->param.rc.i_zones; i++ )
1265 x264_zone_t z = h->param.rc.zones[i];
1266 if( z.i_start < 0 || z.i_start > z.i_end )
1268 x264_log( h, X264_LOG_ERROR, "invalid zone: start=%d end=%d\n",
1269 z.i_start, z.i_end );
1272 else if( !z.b_force_qp && z.f_bitrate_factor <= 0 )
1274 x264_log( h, X264_LOG_ERROR, "invalid zone: bitrate_factor=%f\n",
1275 z.f_bitrate_factor );
1280 rc->i_zones = h->param.rc.i_zones + 1;
1281 CHECKED_MALLOC( rc->zones, rc->i_zones * sizeof(x264_zone_t) );
1282 memcpy( rc->zones+1, h->param.rc.zones, (rc->i_zones-1) * sizeof(x264_zone_t) );
1284 // default zone to fall back to if none of the others match
1285 rc->zones[0].i_start = 0;
1286 rc->zones[0].i_end = INT_MAX;
1287 rc->zones[0].b_force_qp = 0;
1288 rc->zones[0].f_bitrate_factor = 1;
1289 CHECKED_MALLOC( rc->zones[0].param, sizeof(x264_param_t) );
1290 memcpy( rc->zones[0].param, &h->param, sizeof(x264_param_t) );
1291 for( int i = 1; i < rc->i_zones; i++ )
1293 if( !rc->zones[i].param )
1294 rc->zones[i].param = rc->zones[0].param;
1303 static x264_zone_t *get_zone( x264_t *h, int frame_num )
1305 for( int i = h->rc->i_zones - 1; i >= 0; i-- )
1307 x264_zone_t *z = &h->rc->zones[i];
1308 if( frame_num >= z->i_start && frame_num <= z->i_end )
1314 void x264_ratecontrol_summary( x264_t *h )
1316 x264_ratecontrol_t *rc = h->rc;
1317 if( rc->b_abr && h->param.rc.i_rc_method == X264_RC_ABR && rc->cbr_decay > .9999 )
1319 double base_cplx = h->mb.i_mb_count * (h->param.i_bframe ? 120 : 80);
1320 double mbtree_offset = h->param.rc.b_mb_tree ? (1.0-h->param.rc.f_qcompress)*13.5 : 0;
1321 x264_log( h, X264_LOG_INFO, "final ratefactor: %.2f\n",
1322 qscale2qp( pow( base_cplx, 1 - rc->qcompress )
1323 * rc->cplxr_sum / rc->wanted_bits_window ) - mbtree_offset - QP_BD_OFFSET );
1327 void x264_ratecontrol_delete( x264_t *h )
1329 x264_ratecontrol_t *rc = h->rc;
1332 if( rc->p_stat_file_out )
1334 b_regular_file = x264_is_regular_file( rc->p_stat_file_out );
1335 fclose( rc->p_stat_file_out );
1336 if( h->i_frame >= rc->num_entries && b_regular_file )
1337 if( rename( rc->psz_stat_file_tmpname, h->param.rc.psz_stat_out ) != 0 )
1339 x264_log( h, X264_LOG_ERROR, "failed to rename \"%s\" to \"%s\"\n",
1340 rc->psz_stat_file_tmpname, h->param.rc.psz_stat_out );
1342 x264_free( rc->psz_stat_file_tmpname );
1344 if( rc->p_mbtree_stat_file_out )
1346 b_regular_file = x264_is_regular_file( rc->p_mbtree_stat_file_out );
1347 fclose( rc->p_mbtree_stat_file_out );
1348 if( h->i_frame >= rc->num_entries && b_regular_file )
1349 if( rename( rc->psz_mbtree_stat_file_tmpname, rc->psz_mbtree_stat_file_name ) != 0 )
1351 x264_log( h, X264_LOG_ERROR, "failed to rename \"%s\" to \"%s\"\n",
1352 rc->psz_mbtree_stat_file_tmpname, rc->psz_mbtree_stat_file_name );
1354 x264_free( rc->psz_mbtree_stat_file_tmpname );
1355 x264_free( rc->psz_mbtree_stat_file_name );
1357 if( rc->p_mbtree_stat_file_in )
1358 fclose( rc->p_mbtree_stat_file_in );
1359 x264_free( rc->pred );
1360 x264_free( rc->pred_b_from_p );
1361 x264_free( rc->entry );
1362 x264_macroblock_tree_rescale_destroy( rc );
1365 x264_free( rc->zones[0].param );
1366 for( int i = 1; i < rc->i_zones; i++ )
1367 if( rc->zones[i].param != rc->zones[0].param && rc->zones[i].param->param_free )
1368 rc->zones[i].param->param_free( rc->zones[i].param );
1369 x264_free( rc->zones );
1374 static void accum_p_qp_update( x264_t *h, float qp )
1376 x264_ratecontrol_t *rc = h->rc;
1377 rc->accum_p_qp *= .95;
1378 rc->accum_p_norm *= .95;
1379 rc->accum_p_norm += 1;
1380 if( h->sh.i_type == SLICE_TYPE_I )
1381 rc->accum_p_qp += qp + rc->ip_offset;
1383 rc->accum_p_qp += qp;
1386 /* Before encoding a frame, choose a QP for it */
1387 void x264_ratecontrol_start( x264_t *h, int i_force_qp, int overhead )
1389 x264_ratecontrol_t *rc = h->rc;
1390 ratecontrol_entry_t *rce = NULL;
1391 x264_zone_t *zone = get_zone( h, h->fenc->i_frame );
1396 if( zone && (!rc->prev_zone || zone->param != rc->prev_zone->param) )
1397 x264_encoder_reconfig( h, zone->param );
1398 rc->prev_zone = zone;
1400 if( h->param.rc.b_stat_read )
1402 int frame = h->fenc->i_frame;
1403 assert( frame >= 0 && frame < rc->num_entries );
1404 rce = h->rc->rce = &h->rc->entry[frame];
1406 if( h->sh.i_type == SLICE_TYPE_B
1407 && h->param.analyse.i_direct_mv_pred == X264_DIRECT_PRED_AUTO )
1409 h->sh.b_direct_spatial_mv_pred = ( rce->direct_mode == 's' );
1410 h->mb.b_direct_auto_read = ( rce->direct_mode == 's' || rce->direct_mode == 't' );
1416 memset( h->fdec->i_row_bits, 0, h->mb.i_mb_height * sizeof(int) );
1417 memset( h->fdec->f_row_qp, 0, h->mb.i_mb_height * sizeof(float) );
1418 memset( h->fdec->f_row_qscale, 0, h->mb.i_mb_height * sizeof(float) );
1419 rc->row_pred = &rc->row_preds[h->sh.i_type];
1420 rc->buffer_rate = h->fenc->i_cpb_duration * rc->vbv_max_rate * h->sps->vui.i_num_units_in_tick / h->sps->vui.i_time_scale;
1421 update_vbv_plan( h, overhead );
1423 const x264_level_t *l = x264_levels;
1424 while( l->level_idc != 0 && l->level_idc != h->param.i_level_idc )
1427 int mincr = l->mincr;
1429 if( h->param.b_bluray_compat )
1432 /* Profiles above High don't require minCR, so just set the maximum to a large value. */
1433 if( h->sps->i_profile_idc > PROFILE_HIGH )
1434 rc->frame_size_maximum = 1e9;
1437 /* The spec has a bizarre special case for the first frame. */
1438 if( h->i_frame == 0 )
1440 //384 * ( Max( PicSizeInMbs, fR * MaxMBPS ) + MaxMBPS * ( tr( 0 ) - tr,n( 0 ) ) ) / MinCR
1441 double fr = 1. / 172;
1442 int pic_size_in_mbs = h->mb.i_mb_width * h->mb.i_mb_height;
1443 rc->frame_size_maximum = 384 * BIT_DEPTH * X264_MAX( pic_size_in_mbs, fr*l->mbps ) / mincr;
1447 //384 * MaxMBPS * ( tr( n ) - tr( n - 1 ) ) / MinCR
1448 rc->frame_size_maximum = 384 * BIT_DEPTH * ((double)h->fenc->i_cpb_duration * h->sps->vui.i_num_units_in_tick / h->sps->vui.i_time_scale) * l->mbps / mincr;
1453 if( h->sh.i_type != SLICE_TYPE_B )
1454 rc->bframes = h->fenc->i_bframes;
1458 q = qscale2qp( rate_estimate_qscale( h ) );
1460 else if( rc->b_2pass )
1462 rce->new_qscale = rate_estimate_qscale( h );
1463 q = qscale2qp( rce->new_qscale );
1467 if( h->sh.i_type == SLICE_TYPE_B && h->fdec->b_kept_as_ref )
1468 q = ( rc->qp_constant[ SLICE_TYPE_B ] + rc->qp_constant[ SLICE_TYPE_P ] ) / 2;
1470 q = rc->qp_constant[ h->sh.i_type ];
1474 if( zone->b_force_qp )
1475 q += zone->i_qp - rc->qp_constant[SLICE_TYPE_P];
1477 q -= 6*log2f( zone->f_bitrate_factor );
1480 if( i_force_qp != X264_QP_AUTO )
1483 q = x264_clip3f( q, h->param.rc.i_qp_min, h->param.rc.i_qp_max );
1485 rc->qpa_rc = rc->qpa_rc_prev =
1486 rc->qpa_aq = rc->qpa_aq_prev = 0;
1487 rc->qp = x264_clip3( q + 0.5f, 0, QP_MAX );
1488 h->fdec->f_qp_avg_rc =
1489 h->fdec->f_qp_avg_aq =
1492 rce->new_qp = rc->qp;
1494 accum_p_qp_update( h, rc->qpm );
1496 if( h->sh.i_type != SLICE_TYPE_B )
1497 rc->last_non_b_pict_type = h->sh.i_type;
1500 static float predict_row_size( x264_t *h, int y, float qscale )
1502 /* average between two predictors:
1503 * absolute SATD, and scaled bit cost of the colocated row in the previous frame */
1504 x264_ratecontrol_t *rc = h->rc;
1505 float pred_s = predict_size( rc->row_pred[0], qscale, h->fdec->i_row_satd[y] );
1506 if( h->sh.i_type == SLICE_TYPE_I || qscale >= h->fref[0][0]->f_row_qscale[y] )
1508 if( h->sh.i_type == SLICE_TYPE_P
1509 && h->fref[0][0]->i_type == h->fdec->i_type
1510 && h->fref[0][0]->f_row_qscale[y] > 0
1511 && h->fref[0][0]->i_row_satd[y] > 0
1512 && (abs(h->fref[0][0]->i_row_satd[y] - h->fdec->i_row_satd[y]) < h->fdec->i_row_satd[y]/2))
1514 float pred_t = h->fref[0][0]->i_row_bits[y] * h->fdec->i_row_satd[y] / h->fref[0][0]->i_row_satd[y]
1515 * h->fref[0][0]->f_row_qscale[y] / qscale;
1516 return (pred_s + pred_t) * 0.5f;
1520 /* Our QP is lower than the reference! */
1523 float pred_intra = predict_size( rc->row_pred[1], qscale, h->fdec->i_row_satds[0][0][y] );
1524 /* Sum: better to overestimate than underestimate by using only one of the two predictors. */
1525 return pred_intra + pred_s;
1529 static int row_bits_so_far( x264_t *h, int y )
1532 for( int i = h->i_threadslice_start; i <= y; i++ )
1533 bits += h->fdec->i_row_bits[i];
1537 static float predict_row_size_sum( x264_t *h, int y, float qp )
1539 float qscale = qp2qscale( qp );
1540 float bits = row_bits_so_far( h, y );
1541 for( int i = y+1; i < h->i_threadslice_end; i++ )
1542 bits += predict_row_size( h, i, qscale );
1547 * eliminate all use of qp in row ratecontrol: make it entirely qscale-based.
1548 * make this function stop being needlessly O(N^2)
1549 * update more often than once per row? */
1550 int x264_ratecontrol_mb( x264_t *h, int bits )
1552 x264_ratecontrol_t *rc = h->rc;
1553 const int y = h->mb.i_mb_y;
1555 h->fdec->i_row_bits[y] += bits;
1556 rc->qpa_aq += h->mb.i_qp;
1558 if( h->mb.i_mb_x != h->mb.i_mb_width - 1 )
1562 rc->qpa_rc += rc->qpm * h->mb.i_mb_width;
1567 float qscale = qp2qscale( rc->qpm );
1568 h->fdec->f_row_qp[y] = rc->qpm;
1569 h->fdec->f_row_qscale[y] = qscale;
1571 update_predictor( rc->row_pred[0], qscale, h->fdec->i_row_satd[y], h->fdec->i_row_bits[y] );
1572 if( h->sh.i_type == SLICE_TYPE_P && rc->qpm < h->fref[0][0]->f_row_qp[y] )
1573 update_predictor( rc->row_pred[1], qscale, h->fdec->i_row_satds[0][0][y], h->fdec->i_row_bits[y] );
1575 /* update ratecontrol per-mbpair in MBAFF */
1576 if( SLICE_MBAFF && !(y&1) )
1579 /* FIXME: We don't currently support the case where there's a slice
1580 * boundary in between. */
1581 int can_reencode_row = h->sh.i_first_mb <= ((h->mb.i_mb_y - SLICE_MBAFF) * h->mb.i_mb_stride);
1583 /* tweak quality based on difference from predicted size */
1584 float prev_row_qp = h->fdec->f_row_qp[y];
1585 float qp_absolute_max = h->param.rc.i_qp_max;
1586 if( rc->rate_factor_max_increment )
1587 qp_absolute_max = X264_MIN( qp_absolute_max, rc->qp_novbv + rc->rate_factor_max_increment );
1588 float qp_max = X264_MIN( prev_row_qp + h->param.rc.i_qp_step, qp_absolute_max );
1589 float qp_min = X264_MAX( prev_row_qp - h->param.rc.i_qp_step, h->param.rc.i_qp_min );
1590 float step_size = 0.5f;
1591 float buffer_left_planned = rc->buffer_fill - rc->frame_size_planned;
1592 float slice_size_planned = h->param.b_sliced_threads ? rc->slice_size_planned : rc->frame_size_planned;
1593 float max_frame_error = X264_MAX( 0.05f, 1.0f / h->mb.i_mb_height );
1594 float size_of_other_slices = 0;
1595 if( h->param.b_sliced_threads )
1597 float size_of_other_slices_planned = 0;
1598 for( int i = 0; i < h->param.i_threads; i++ )
1599 if( h != h->thread[i] )
1601 size_of_other_slices += h->thread[i]->rc->frame_size_estimated;
1602 size_of_other_slices_planned += h->thread[i]->rc->slice_size_planned;
1604 float weight = rc->slice_size_planned / rc->frame_size_planned;
1605 size_of_other_slices = (size_of_other_slices - size_of_other_slices_planned) * weight + size_of_other_slices_planned;
1607 if( y < h->i_threadslice_end-1 )
1609 /* B-frames shouldn't use lower QP than their reference frames. */
1610 if( h->sh.i_type == SLICE_TYPE_B )
1612 qp_min = X264_MAX( qp_min, X264_MAX( h->fref[0][0]->f_row_qp[y+1], h->fref[1][0]->f_row_qp[y+1] ) );
1613 rc->qpm = X264_MAX( rc->qpm, qp_min );
1616 /* More threads means we have to be more cautious in letting ratecontrol use up extra bits. */
1617 float rc_tol = buffer_left_planned / h->param.i_threads * rc->rate_tolerance;
1618 float b1 = predict_row_size_sum( h, y, rc->qpm ) + size_of_other_slices;
1620 /* Don't increase the row QPs until a sufficent amount of the bits of the frame have been processed, in case a flat */
1621 /* area at the top of the frame was measured inaccurately. */
1622 if( row_bits_so_far( h, y ) < 0.05f * slice_size_planned )
1623 qp_max = qp_absolute_max = prev_row_qp;
1625 if( h->sh.i_type != SLICE_TYPE_I )
1628 if( !rc->b_vbv_min_rate )
1629 qp_min = X264_MAX( qp_min, rc->qp_novbv );
1631 while( rc->qpm < qp_max
1632 && ((b1 > rc->frame_size_planned + rc_tol) ||
1633 (rc->buffer_fill - b1 < buffer_left_planned * 0.5f) ||
1634 (b1 > rc->frame_size_planned && rc->qpm < rc->qp_novbv)) )
1636 rc->qpm += step_size;
1637 b1 = predict_row_size_sum( h, y, rc->qpm ) + size_of_other_slices;
1640 while( rc->qpm > qp_min
1641 && (rc->qpm > h->fdec->f_row_qp[0] || rc->single_frame_vbv)
1642 && ((b1 < rc->frame_size_planned * 0.8f && rc->qpm <= prev_row_qp)
1643 || b1 < (rc->buffer_fill - rc->buffer_size + rc->buffer_rate) * 1.1f) )
1645 rc->qpm -= step_size;
1646 b1 = predict_row_size_sum( h, y, rc->qpm ) + size_of_other_slices;
1649 /* avoid VBV underflow or MinCR violation */
1650 while( (rc->qpm < qp_absolute_max)
1651 && ((rc->buffer_fill - b1 < rc->buffer_rate * max_frame_error) ||
1652 (rc->frame_size_maximum - b1 < rc->frame_size_maximum * max_frame_error)))
1654 rc->qpm += step_size;
1655 b1 = predict_row_size_sum( h, y, rc->qpm ) + size_of_other_slices;
1658 h->rc->frame_size_estimated = b1 - size_of_other_slices;
1660 /* If the current row was large enough to cause a large QP jump, try re-encoding it. */
1661 if( rc->qpm > qp_max && prev_row_qp < qp_max && can_reencode_row )
1663 /* Bump QP to halfway in between... close enough. */
1664 rc->qpm = x264_clip3f( (prev_row_qp + rc->qpm)*0.5f, prev_row_qp + 1.0f, qp_max );
1665 rc->qpa_rc = rc->qpa_rc_prev;
1666 rc->qpa_aq = rc->qpa_aq_prev;
1667 h->fdec->i_row_bits[y] = h->fdec->i_row_bits[y-SLICE_MBAFF] = 0;
1673 h->rc->frame_size_estimated = predict_row_size_sum( h, y, rc->qpm );
1675 /* Last-ditch attempt: if the last row of the frame underflowed the VBV,
1677 if( (h->rc->frame_size_estimated + size_of_other_slices) > (rc->buffer_fill - rc->buffer_rate * max_frame_error) &&
1678 rc->qpm < qp_max && can_reencode_row )
1681 rc->qpa_rc = rc->qpa_rc_prev;
1682 rc->qpa_aq = rc->qpa_aq_prev;
1683 h->fdec->i_row_bits[y] = h->fdec->i_row_bits[y-SLICE_MBAFF] = 0;
1688 rc->qpa_rc_prev = rc->qpa_rc;
1689 rc->qpa_aq_prev = rc->qpa_aq;
1694 int x264_ratecontrol_qp( x264_t *h )
1697 return x264_clip3( h->rc->qpm + 0.5f, h->param.rc.i_qp_min, h->param.rc.i_qp_max );
1700 int x264_ratecontrol_mb_qp( x264_t *h )
1703 float qp = h->rc->qpm;
1704 if( h->param.rc.i_aq_mode )
1706 /* MB-tree currently doesn't adjust quantizers in unreferenced frames. */
1707 float qp_offset = h->fdec->b_kept_as_ref ? h->fenc->f_qp_offset[h->mb.i_mb_xy] : h->fenc->f_qp_offset_aq[h->mb.i_mb_xy];
1708 /* Scale AQ's effect towards zero in emergency mode. */
1709 if( qp > QP_MAX_SPEC )
1710 qp_offset *= (QP_MAX - qp) / (QP_MAX - QP_MAX_SPEC);
1713 return x264_clip3( qp + 0.5f, h->param.rc.i_qp_min, h->param.rc.i_qp_max );
1716 /* In 2pass, force the same frame types as in the 1st pass */
1717 int x264_ratecontrol_slice_type( x264_t *h, int frame_num )
1719 x264_ratecontrol_t *rc = h->rc;
1720 if( h->param.rc.b_stat_read )
1722 if( frame_num >= rc->num_entries )
1724 /* We could try to initialize everything required for ABR and
1725 * adaptive B-frames, but that would be complicated.
1726 * So just calculate the average QP used so far. */
1727 h->param.rc.i_qp_constant = (h->stat.i_frame_count[SLICE_TYPE_P] == 0) ? 24 + QP_BD_OFFSET
1728 : 1 + h->stat.f_frame_qp[SLICE_TYPE_P] / h->stat.i_frame_count[SLICE_TYPE_P];
1729 rc->qp_constant[SLICE_TYPE_P] = x264_clip3( h->param.rc.i_qp_constant, 0, QP_MAX );
1730 rc->qp_constant[SLICE_TYPE_I] = x264_clip3( (int)( qscale2qp( qp2qscale( h->param.rc.i_qp_constant ) / fabs( h->param.rc.f_ip_factor )) + 0.5 ), 0, QP_MAX );
1731 rc->qp_constant[SLICE_TYPE_B] = x264_clip3( (int)( qscale2qp( qp2qscale( h->param.rc.i_qp_constant ) * fabs( h->param.rc.f_pb_factor )) + 0.5 ), 0, QP_MAX );
1733 x264_log( h, X264_LOG_ERROR, "2nd pass has more frames than 1st pass (%d)\n", rc->num_entries );
1734 x264_log( h, X264_LOG_ERROR, "continuing anyway, at constant QP=%d\n", h->param.rc.i_qp_constant );
1735 if( h->param.i_bframe_adaptive )
1736 x264_log( h, X264_LOG_ERROR, "disabling adaptive B-frames\n" );
1738 for( int i = 0; i < h->param.i_threads; i++ )
1740 h->thread[i]->rc->b_abr = 0;
1741 h->thread[i]->rc->b_2pass = 0;
1742 h->thread[i]->param.rc.i_rc_method = X264_RC_CQP;
1743 h->thread[i]->param.rc.b_stat_read = 0;
1744 h->thread[i]->param.i_bframe_adaptive = 0;
1745 h->thread[i]->param.i_scenecut_threshold = 0;
1746 h->thread[i]->param.rc.b_mb_tree = 0;
1747 if( h->thread[i]->param.i_bframe > 1 )
1748 h->thread[i]->param.i_bframe = 1;
1750 return X264_TYPE_AUTO;
1752 return rc->entry[frame_num].frame_type;
1755 return X264_TYPE_AUTO;
1758 void x264_ratecontrol_set_weights( x264_t *h, x264_frame_t *frm )
1760 ratecontrol_entry_t *rce = &h->rc->entry[frm->i_frame];
1761 if( h->param.analyse.i_weighted_pred <= 0 )
1764 if( rce->i_weight_denom[0] >= 0 )
1765 SET_WEIGHT( frm->weight[0][0], 1, rce->weight[0][0], rce->i_weight_denom[0], rce->weight[0][1] );
1767 if( rce->i_weight_denom[1] >= 0 )
1769 SET_WEIGHT( frm->weight[0][1], 1, rce->weight[1][0], rce->i_weight_denom[1], rce->weight[1][1] );
1770 SET_WEIGHT( frm->weight[0][2], 1, rce->weight[2][0], rce->i_weight_denom[1], rce->weight[2][1] );
1774 /* After encoding one frame, save stats and update ratecontrol state */
1775 int x264_ratecontrol_end( x264_t *h, int bits, int *filler )
1777 x264_ratecontrol_t *rc = h->rc;
1778 const int *mbs = h->stat.frame.i_mb_count;
1782 h->stat.frame.i_mb_count_skip = mbs[P_SKIP] + mbs[B_SKIP];
1783 h->stat.frame.i_mb_count_i = mbs[I_16x16] + mbs[I_8x8] + mbs[I_4x4];
1784 h->stat.frame.i_mb_count_p = mbs[P_L0] + mbs[P_8x8];
1785 for( int i = B_DIRECT; i < B_8x8; i++ )
1786 h->stat.frame.i_mb_count_p += mbs[i];
1788 h->fdec->f_qp_avg_rc = rc->qpa_rc /= h->mb.i_mb_count;
1789 h->fdec->f_qp_avg_aq = (float)rc->qpa_aq / h->mb.i_mb_count;
1791 if( h->param.rc.b_stat_write )
1793 char c_type = h->sh.i_type==SLICE_TYPE_I ? (h->fenc->i_poc==0 ? 'I' : 'i')
1794 : h->sh.i_type==SLICE_TYPE_P ? 'P'
1795 : h->fenc->b_kept_as_ref ? 'B' : 'b';
1796 int dir_frame = h->stat.frame.i_direct_score[1] - h->stat.frame.i_direct_score[0];
1797 int dir_avg = h->stat.i_direct_score[1] - h->stat.i_direct_score[0];
1798 char c_direct = h->mb.b_direct_auto_write ?
1799 ( dir_frame>0 ? 's' : dir_frame<0 ? 't' :
1800 dir_avg>0 ? 's' : dir_avg<0 ? 't' : '-' )
1802 if( fprintf( rc->p_stat_file_out,
1803 "in:%d out:%d type:%c dur:%"PRId64" cpbdur:%"PRId64" q:%.2f tex:%d mv:%d misc:%d imb:%d pmb:%d smb:%d d:%c ref:",
1804 h->fenc->i_frame, h->i_frame,
1805 c_type, h->fenc->i_duration,
1806 h->fenc->i_cpb_duration, rc->qpa_rc,
1807 h->stat.frame.i_tex_bits,
1808 h->stat.frame.i_mv_bits,
1809 h->stat.frame.i_misc_bits,
1810 h->stat.frame.i_mb_count_i,
1811 h->stat.frame.i_mb_count_p,
1812 h->stat.frame.i_mb_count_skip,
1816 /* Only write information for reference reordering once. */
1817 int use_old_stats = h->param.rc.b_stat_read && rc->rce->refs > 1;
1818 for( int i = 0; i < (use_old_stats ? rc->rce->refs : h->i_ref[0]); i++ )
1820 int refcount = use_old_stats ? rc->rce->refcount[i]
1821 : PARAM_INTERLACED ? h->stat.frame.i_mb_count_ref[0][i*2]
1822 + h->stat.frame.i_mb_count_ref[0][i*2+1]
1823 : h->stat.frame.i_mb_count_ref[0][i];
1824 if( fprintf( rc->p_stat_file_out, "%d ", refcount ) < 0 )
1828 if( h->param.analyse.i_weighted_pred >= X264_WEIGHTP_SIMPLE && h->sh.weight[0][0].weightfn )
1830 if( fprintf( rc->p_stat_file_out, "w:%d,%d,%d",
1831 h->sh.weight[0][0].i_denom, h->sh.weight[0][0].i_scale, h->sh.weight[0][0].i_offset ) < 0 )
1833 if( h->sh.weight[0][1].weightfn || h->sh.weight[0][2].weightfn )
1835 if( fprintf( rc->p_stat_file_out, ",%d,%d,%d,%d,%d ",
1836 h->sh.weight[0][1].i_denom, h->sh.weight[0][1].i_scale, h->sh.weight[0][1].i_offset,
1837 h->sh.weight[0][2].i_scale, h->sh.weight[0][2].i_offset ) < 0 )
1840 else if( fprintf( rc->p_stat_file_out, " " ) < 0 )
1844 if( fprintf( rc->p_stat_file_out, ";\n") < 0 )
1847 /* Don't re-write the data in multi-pass mode. */
1848 if( h->param.rc.b_mb_tree && h->fenc->b_kept_as_ref && !h->param.rc.b_stat_read )
1850 uint8_t i_type = h->sh.i_type;
1851 /* Values are stored as big-endian FIX8.8 */
1852 for( int i = 0; i < h->mb.i_mb_count; i++ )
1853 rc->mbtree.qp_buffer[0][i] = endian_fix16( h->fenc->f_qp_offset[i]*256.0 );
1854 if( fwrite( &i_type, 1, 1, rc->p_mbtree_stat_file_out ) < 1 )
1856 if( fwrite( rc->mbtree.qp_buffer[0], sizeof(uint16_t), h->mb.i_mb_count, rc->p_mbtree_stat_file_out ) < h->mb.i_mb_count )
1863 if( h->sh.i_type != SLICE_TYPE_B )
1864 rc->cplxr_sum += bits * qp2qscale( rc->qpa_rc ) / rc->last_rceq;
1867 /* Depends on the fact that B-frame's QP is an offset from the following P-frame's.
1868 * Not perfectly accurate with B-refs, but good enough. */
1869 rc->cplxr_sum += bits * qp2qscale( rc->qpa_rc ) / (rc->last_rceq * fabs( h->param.rc.f_pb_factor ));
1871 rc->cplxr_sum *= rc->cbr_decay;
1872 rc->wanted_bits_window += h->fenc->f_duration * rc->bitrate;
1873 rc->wanted_bits_window *= rc->cbr_decay;
1877 rc->expected_bits_sum += qscale2bits( rc->rce, qp2qscale( rc->rce->new_qp ) );
1879 if( h->mb.b_variable_qp )
1881 if( h->sh.i_type == SLICE_TYPE_B )
1883 rc->bframe_bits += bits;
1884 if( h->fenc->b_last_minigop_bframe )
1886 update_predictor( rc->pred_b_from_p, qp2qscale( rc->qpa_rc ),
1887 h->fref[1][h->i_ref[1]-1]->i_satd, rc->bframe_bits / rc->bframes );
1888 rc->bframe_bits = 0;
1893 *filler = update_vbv( h, bits );
1894 rc->filler_bits_sum += *filler * 8;
1896 if( h->sps->vui.b_nal_hrd_parameters_present )
1898 if( h->fenc->i_frame == 0 )
1900 // access unit initialises the HRD
1901 h->fenc->hrd_timing.cpb_initial_arrival_time = 0;
1902 rc->initial_cpb_removal_delay = h->initial_cpb_removal_delay;
1903 rc->initial_cpb_removal_delay_offset = h->initial_cpb_removal_delay_offset;
1904 h->fenc->hrd_timing.cpb_removal_time = rc->nrt_first_access_unit = (double)rc->initial_cpb_removal_delay / 90000;
1908 h->fenc->hrd_timing.cpb_removal_time = rc->nrt_first_access_unit + (double)(h->fenc->i_cpb_delay - h->i_cpb_delay_pir_offset) *
1909 h->sps->vui.i_num_units_in_tick / h->sps->vui.i_time_scale;
1911 double cpb_earliest_arrival_time = h->fenc->hrd_timing.cpb_removal_time - (double)rc->initial_cpb_removal_delay / 90000;
1912 if( h->fenc->b_keyframe )
1914 rc->nrt_first_access_unit = h->fenc->hrd_timing.cpb_removal_time;
1915 rc->initial_cpb_removal_delay = h->initial_cpb_removal_delay;
1916 rc->initial_cpb_removal_delay_offset = h->initial_cpb_removal_delay_offset;
1919 cpb_earliest_arrival_time -= (double)rc->initial_cpb_removal_delay_offset / 90000;
1921 if( h->sps->vui.hrd.b_cbr_hrd )
1922 h->fenc->hrd_timing.cpb_initial_arrival_time = rc->previous_cpb_final_arrival_time;
1924 h->fenc->hrd_timing.cpb_initial_arrival_time = X264_MAX( rc->previous_cpb_final_arrival_time, cpb_earliest_arrival_time );
1926 int filler_bits = *filler ? X264_MAX( (FILLER_OVERHEAD - h->param.b_annexb), *filler )*8 : 0;
1928 h->fenc->hrd_timing.cpb_final_arrival_time = rc->previous_cpb_final_arrival_time = h->fenc->hrd_timing.cpb_initial_arrival_time +
1929 (double)(bits + filler_bits) / h->sps->vui.hrd.i_bit_rate_unscaled;
1931 h->fenc->hrd_timing.dpb_output_time = (double)h->fenc->i_dpb_output_delay * h->sps->vui.i_num_units_in_tick / h->sps->vui.i_time_scale +
1932 h->fenc->hrd_timing.cpb_removal_time;
1937 x264_log( h, X264_LOG_ERROR, "ratecontrol_end: stats file could not be written to\n" );
1941 /****************************************************************************
1943 ***************************************************************************/
1946 * modify the bitrate curve from pass1 for one frame
1948 static double get_qscale(x264_t *h, ratecontrol_entry_t *rce, double rate_factor, int frame_num)
1950 x264_ratecontrol_t *rcc= h->rc;
1951 x264_zone_t *zone = get_zone( h, frame_num );
1953 if( h->param.rc.b_mb_tree )
1955 double timescale = (double)h->sps->vui.i_num_units_in_tick / h->sps->vui.i_time_scale;
1956 q = pow( BASE_FRAME_DURATION / CLIP_DURATION(rce->i_duration * timescale), 1 - h->param.rc.f_qcompress );
1959 q = pow( rce->blurred_complexity, 1 - rcc->qcompress );
1961 // avoid NaN's in the rc_eq
1962 if( !isfinite(q) || rce->tex_bits + rce->mv_bits == 0 )
1963 q = rcc->last_qscale_for[rce->pict_type];
1968 rcc->last_qscale = q;
1973 if( zone->b_force_qp )
1974 q = qp2qscale( zone->i_qp );
1976 q /= zone->f_bitrate_factor;
1982 static double get_diff_limited_q(x264_t *h, ratecontrol_entry_t *rce, double q, int frame_num)
1984 x264_ratecontrol_t *rcc = h->rc;
1985 const int pict_type = rce->pict_type;
1986 x264_zone_t *zone = get_zone( h, frame_num );
1988 // force I/B quants as a function of P quants
1989 const double last_p_q = rcc->last_qscale_for[SLICE_TYPE_P];
1990 const double last_non_b_q= rcc->last_qscale_for[rcc->last_non_b_pict_type];
1991 if( pict_type == SLICE_TYPE_I )
1994 double pq = qp2qscale( rcc->accum_p_qp / rcc->accum_p_norm );
1995 double ip_factor = fabs( h->param.rc.f_ip_factor );
1996 /* don't apply ip_factor if the following frame is also I */
1997 if( rcc->accum_p_norm <= 0 )
1999 else if( h->param.rc.f_ip_factor < 0 )
2001 else if( rcc->accum_p_norm >= 1 )
2004 q = rcc->accum_p_norm * pq / ip_factor + (1 - rcc->accum_p_norm) * iq;
2006 else if( pict_type == SLICE_TYPE_B )
2008 if( h->param.rc.f_pb_factor > 0 )
2010 if( !rce->kept_as_ref )
2011 q *= fabs( h->param.rc.f_pb_factor );
2013 else if( pict_type == SLICE_TYPE_P
2014 && rcc->last_non_b_pict_type == SLICE_TYPE_P
2015 && rce->tex_bits == 0 )
2020 /* last qscale / qdiff stuff */
2021 if( rcc->last_non_b_pict_type == pict_type &&
2022 (pict_type!=SLICE_TYPE_I || rcc->last_accum_p_norm < 1) )
2024 double last_q = rcc->last_qscale_for[pict_type];
2025 double max_qscale = last_q * rcc->lstep;
2026 double min_qscale = last_q / rcc->lstep;
2028 if ( q > max_qscale ) q = max_qscale;
2029 else if( q < min_qscale ) q = min_qscale;
2032 rcc->last_qscale_for[pict_type] = q;
2033 if( pict_type != SLICE_TYPE_B )
2034 rcc->last_non_b_pict_type = pict_type;
2035 if( pict_type == SLICE_TYPE_I )
2037 rcc->last_accum_p_norm = rcc->accum_p_norm;
2038 rcc->accum_p_norm = 0;
2039 rcc->accum_p_qp = 0;
2041 if( pict_type == SLICE_TYPE_P )
2043 float mask = 1 - pow( (float)rce->i_count / rcc->nmb, 2 );
2044 rcc->accum_p_qp = mask * (qscale2qp( q ) + rcc->accum_p_qp);
2045 rcc->accum_p_norm = mask * (1 + rcc->accum_p_norm);
2050 if( zone->b_force_qp )
2051 q = qp2qscale( zone->i_qp );
2053 q /= zone->f_bitrate_factor;
2059 static float predict_size( predictor_t *p, float q, float var )
2061 return (p->coeff*var + p->offset) / (q*p->count);
2064 static void update_predictor( predictor_t *p, float q, float var, float bits )
2069 float old_coeff = p->coeff / p->count;
2070 float new_coeff = X264_MAX( bits*q / var, p->coeff_min );
2071 float new_coeff_clipped = x264_clip3f( new_coeff, old_coeff/range, old_coeff*range );
2072 float new_offset = bits*q - new_coeff_clipped * var;
2073 if( new_offset >= 0 )
2074 new_coeff = new_coeff_clipped;
2077 p->count *= p->decay;
2078 p->coeff *= p->decay;
2079 p->offset *= p->decay;
2081 p->coeff += new_coeff;
2082 p->offset += new_offset;
2085 // update VBV after encoding a frame
2086 static int update_vbv( x264_t *h, int bits )
2089 int bitrate = h->sps->vui.hrd.i_bit_rate_unscaled;
2090 x264_ratecontrol_t *rcc = h->rc;
2091 x264_ratecontrol_t *rct = h->thread[0]->rc;
2092 uint64_t buffer_size = (uint64_t)h->sps->vui.hrd.i_cpb_size_unscaled * h->sps->vui.i_time_scale;
2094 if( rcc->last_satd >= h->mb.i_mb_count )
2095 update_predictor( &rct->pred[h->sh.i_type], qp2qscale( rcc->qpa_rc ), rcc->last_satd, bits );
2100 rct->buffer_fill_final -= (uint64_t)bits * h->sps->vui.i_time_scale;
2102 if( rct->buffer_fill_final < 0 )
2103 x264_log( h, X264_LOG_WARNING, "VBV underflow (frame %d, %.0f bits)\n", h->i_frame, (double)rct->buffer_fill_final / h->sps->vui.i_time_scale );
2104 rct->buffer_fill_final = X264_MAX( rct->buffer_fill_final, 0 );
2105 rct->buffer_fill_final += (uint64_t)bitrate * h->sps->vui.i_num_units_in_tick * h->fenc->i_cpb_duration;
2107 if( h->sps->vui.hrd.b_cbr_hrd && rct->buffer_fill_final > buffer_size )
2109 int64_t scale = (int64_t)h->sps->vui.i_time_scale * 8;
2110 filler = (rct->buffer_fill_final - buffer_size + scale - 1) / scale;
2111 bits = X264_MAX( (FILLER_OVERHEAD - h->param.b_annexb), filler ) * 8;
2112 rct->buffer_fill_final -= (uint64_t)bits * h->sps->vui.i_time_scale;
2115 rct->buffer_fill_final = X264_MIN( rct->buffer_fill_final, buffer_size );
2120 void x264_hrd_fullness( x264_t *h )
2122 x264_ratecontrol_t *rct = h->thread[0]->rc;
2123 uint64_t denom = (uint64_t)h->sps->vui.hrd.i_bit_rate_unscaled * h->sps->vui.i_time_scale / rct->hrd_multiply_denom;
2124 uint64_t cpb_state = rct->buffer_fill_final;
2125 uint64_t cpb_size = (uint64_t)h->sps->vui.hrd.i_cpb_size_unscaled * h->sps->vui.i_time_scale;
2126 uint64_t multiply_factor = 180000 / rct->hrd_multiply_denom;
2128 if( rct->buffer_fill_final < 0 || rct->buffer_fill_final > cpb_size )
2130 x264_log( h, X264_LOG_WARNING, "CPB %s: %.0lf bits in a %.0lf-bit buffer\n",
2131 rct->buffer_fill_final < 0 ? "underflow" : "overflow", (float)rct->buffer_fill_final/denom, (float)cpb_size/denom );
2134 h->initial_cpb_removal_delay = (multiply_factor * cpb_state + denom) / (2*denom);
2135 h->initial_cpb_removal_delay_offset = (multiply_factor * cpb_size + denom) / (2*denom) - h->initial_cpb_removal_delay;
2138 // provisionally update VBV according to the planned size of all frames currently in progress
2139 static void update_vbv_plan( x264_t *h, int overhead )
2141 x264_ratecontrol_t *rcc = h->rc;
2142 rcc->buffer_fill = h->thread[0]->rc->buffer_fill_final / h->sps->vui.i_time_scale;
2143 if( h->i_thread_frames > 1 )
2145 int j = h->rc - h->thread[0]->rc;
2146 for( int i = 1; i < h->i_thread_frames; i++ )
2148 x264_t *t = h->thread[ (j+i)%h->i_thread_frames ];
2149 double bits = t->rc->frame_size_planned;
2150 if( !t->b_thread_active )
2152 bits = X264_MAX(bits, t->rc->frame_size_estimated);
2153 rcc->buffer_fill -= bits;
2154 rcc->buffer_fill = X264_MAX( rcc->buffer_fill, 0 );
2155 rcc->buffer_fill += t->rc->buffer_rate;
2156 rcc->buffer_fill = X264_MIN( rcc->buffer_fill, rcc->buffer_size );
2159 rcc->buffer_fill = X264_MIN( rcc->buffer_fill, rcc->buffer_size );
2160 rcc->buffer_fill -= overhead;
2163 // apply VBV constraints and clip qscale to between lmin and lmax
2164 static double clip_qscale( x264_t *h, int pict_type, double q )
2166 x264_ratecontrol_t *rcc = h->rc;
2167 double lmin = rcc->lmin[pict_type];
2168 double lmax = rcc->lmax[pict_type];
2169 if( rcc->rate_factor_max_increment )
2170 lmax = X264_MIN( lmax, qp2qscale( rcc->qp_novbv + rcc->rate_factor_max_increment ) );
2173 /* B-frames are not directly subject to VBV,
2174 * since they are controlled by the P-frames' QPs. */
2176 if( rcc->b_vbv && rcc->last_satd > 0 )
2178 /* Lookahead VBV: raise the quantizer as necessary such that no frames in
2179 * the lookahead overflow and such that the buffer is in a reasonable state
2180 * by the end of the lookahead. */
2181 if( h->param.rc.i_lookahead )
2185 /* Avoid an infinite loop. */
2186 for( int iterations = 0; iterations < 1000 && terminate != 3; iterations++ )
2189 double cur_bits = predict_size( &rcc->pred[h->sh.i_type], q, rcc->last_satd );
2190 double buffer_fill_cur = rcc->buffer_fill - cur_bits;
2192 double total_duration = 0;
2193 frame_q[0] = h->sh.i_type == SLICE_TYPE_I ? q * h->param.rc.f_ip_factor : q;
2194 frame_q[1] = frame_q[0] * h->param.rc.f_pb_factor;
2195 frame_q[2] = frame_q[0] / h->param.rc.f_ip_factor;
2197 /* Loop over the planned future frames. */
2198 for( int j = 0; buffer_fill_cur >= 0 && buffer_fill_cur <= rcc->buffer_size; j++ )
2200 total_duration += h->fenc->f_planned_cpb_duration[j];
2201 buffer_fill_cur += rcc->vbv_max_rate * h->fenc->f_planned_cpb_duration[j];
2202 int i_type = h->fenc->i_planned_type[j];
2203 int i_satd = h->fenc->i_planned_satd[j];
2204 if( i_type == X264_TYPE_AUTO )
2206 i_type = IS_X264_TYPE_I( i_type ) ? SLICE_TYPE_I : IS_X264_TYPE_B( i_type ) ? SLICE_TYPE_B : SLICE_TYPE_P;
2207 cur_bits = predict_size( &rcc->pred[i_type], frame_q[i_type], i_satd );
2208 buffer_fill_cur -= cur_bits;
2210 /* Try to get to get the buffer at least 50% filled, but don't set an impossible goal. */
2211 target_fill = X264_MIN( rcc->buffer_fill + total_duration * rcc->vbv_max_rate * 0.5, rcc->buffer_size * 0.5 );
2212 if( buffer_fill_cur < target_fill )
2218 /* Try to get the buffer no more than 80% filled, but don't set an impossible goal. */
2219 target_fill = x264_clip3f( rcc->buffer_fill - total_duration * rcc->vbv_max_rate * 0.5, rcc->buffer_size * 0.8, rcc->buffer_size );
2220 if( rcc->b_vbv_min_rate && buffer_fill_cur > target_fill )
2229 /* Fallback to old purely-reactive algorithm: no lookahead. */
2232 if( ( pict_type == SLICE_TYPE_P ||
2233 ( pict_type == SLICE_TYPE_I && rcc->last_non_b_pict_type == SLICE_TYPE_I ) ) &&
2234 rcc->buffer_fill/rcc->buffer_size < 0.5 )
2236 q /= x264_clip3f( 2.0*rcc->buffer_fill/rcc->buffer_size, 0.5, 1.0 );
2239 /* Now a hard threshold to make sure the frame fits in VBV.
2240 * This one is mostly for I-frames. */
2241 double bits = predict_size( &rcc->pred[h->sh.i_type], q, rcc->last_satd );
2243 /* For small VBVs, allow the frame to use up the entire VBV. */
2244 double max_fill_factor = h->param.rc.i_vbv_buffer_size >= 5*h->param.rc.i_vbv_max_bitrate / rcc->fps ? 2 : 1;
2245 /* For single-frame VBVs, request that the frame use up the entire VBV. */
2246 double min_fill_factor = rcc->single_frame_vbv ? 1 : 2;
2248 if( bits > rcc->buffer_fill/max_fill_factor )
2249 qf = x264_clip3f( rcc->buffer_fill/(max_fill_factor*bits), 0.2, 1.0 );
2252 if( bits < rcc->buffer_rate/min_fill_factor )
2253 q *= bits*min_fill_factor/rcc->buffer_rate;
2254 q = X264_MAX( q0, q );
2257 /* Apply MinCR restrictions */
2258 double bits = predict_size( &rcc->pred[h->sh.i_type], q, rcc->last_satd );
2259 if( bits > rcc->frame_size_maximum )
2260 q *= bits / rcc->frame_size_maximum;
2261 bits = predict_size( &rcc->pred[h->sh.i_type], q, rcc->last_satd );
2263 /* Check B-frame complexity, and use up any bits that would
2264 * overflow before the next P-frame. */
2265 if( h->sh.i_type == SLICE_TYPE_P && !rcc->single_frame_vbv )
2267 int nb = rcc->bframes;
2268 double pbbits = bits;
2269 double bbits = predict_size( rcc->pred_b_from_p, q * h->param.rc.f_pb_factor, rcc->last_satd );
2271 double bframe_cpb_duration = 0;
2272 double minigop_cpb_duration;
2273 for( int i = 0; i < nb; i++ )
2274 bframe_cpb_duration += h->fenc->f_planned_cpb_duration[1+i];
2276 if( bbits * nb > bframe_cpb_duration * rcc->vbv_max_rate )
2278 pbbits += nb * bbits;
2280 minigop_cpb_duration = bframe_cpb_duration + h->fenc->f_planned_cpb_duration[0];
2281 space = rcc->buffer_fill + minigop_cpb_duration*rcc->vbv_max_rate - rcc->buffer_size;
2282 if( pbbits < space )
2284 q *= X264_MAX( pbbits / space, bits / (0.5 * rcc->buffer_size) );
2286 q = X264_MAX( q0/2, q );
2289 if( !rcc->b_vbv_min_rate )
2290 q = X264_MAX( q0, q );
2295 else if( rcc->b_2pass )
2297 double min2 = log( lmin );
2298 double max2 = log( lmax );
2299 q = (log(q) - min2)/(max2-min2) - 0.5;
2300 q = 1.0/(1.0 + exp( -4*q ));
2301 q = q*(max2-min2) + min2;
2305 return x264_clip3f( q, lmin, lmax );
2308 // update qscale for 1 frame based on actual bits used so far
2309 static float rate_estimate_qscale( x264_t *h )
2312 x264_ratecontrol_t *rcc = h->rc;
2313 ratecontrol_entry_t UNINIT(rce);
2314 int pict_type = h->sh.i_type;
2315 int64_t total_bits = 8*(h->stat.i_frame_size[SLICE_TYPE_I]
2316 + h->stat.i_frame_size[SLICE_TYPE_P]
2317 + h->stat.i_frame_size[SLICE_TYPE_B])
2318 - rcc->filler_bits_sum;
2323 if( pict_type != rce.pict_type )
2325 x264_log( h, X264_LOG_ERROR, "slice=%c but 2pass stats say %c\n",
2326 slice_type_to_char[pict_type], slice_type_to_char[rce.pict_type] );
2330 if( pict_type == SLICE_TYPE_B )
2332 /* B-frames don't have independent ratecontrol, but rather get the
2333 * average QP of the two adjacent P-frames + an offset */
2335 int i0 = IS_X264_TYPE_I(h->fref_nearest[0]->i_type);
2336 int i1 = IS_X264_TYPE_I(h->fref_nearest[1]->i_type);
2337 int dt0 = abs(h->fenc->i_poc - h->fref_nearest[0]->i_poc);
2338 int dt1 = abs(h->fenc->i_poc - h->fref_nearest[1]->i_poc);
2339 float q0 = h->fref_nearest[0]->f_qp_avg_rc;
2340 float q1 = h->fref_nearest[1]->f_qp_avg_rc;
2342 if( h->fref_nearest[0]->i_type == X264_TYPE_BREF )
2343 q0 -= rcc->pb_offset/2;
2344 if( h->fref_nearest[1]->i_type == X264_TYPE_BREF )
2345 q1 -= rcc->pb_offset/2;
2348 q = (q0 + q1) / 2 + rcc->ip_offset;
2354 q = (q0*dt1 + q1*dt0) / (dt0 + dt1);
2356 if( h->fenc->b_kept_as_ref )
2357 q += rcc->pb_offset/2;
2359 q += rcc->pb_offset;
2361 if( rcc->b_2pass && rcc->b_vbv )
2362 rcc->frame_size_planned = qscale2bits( &rce, qp2qscale( q ) );
2364 rcc->frame_size_planned = predict_size( rcc->pred_b_from_p, qp2qscale( q ), h->fref[1][h->i_ref[1]-1]->i_satd );
2365 /* Limit planned size by MinCR */
2367 rcc->frame_size_planned = X264_MIN( rcc->frame_size_planned, rcc->frame_size_maximum );
2368 h->rc->frame_size_estimated = rcc->frame_size_planned;
2372 rcc->last_satd = x264_rc_analyse_slice( h );
2374 return qp2qscale( q );
2378 double abr_buffer = 2 * rcc->rate_tolerance * rcc->bitrate;
2382 double lmin = rcc->lmin[pict_type];
2383 double lmax = rcc->lmax[pict_type];
2385 int64_t predicted_bits = total_bits;
2389 if( h->i_thread_frames > 1 )
2391 int j = h->rc - h->thread[0]->rc;
2392 for( int i = 1; i < h->i_thread_frames; i++ )
2394 x264_t *t = h->thread[ (j+i)%h->i_thread_frames ];
2395 double bits = t->rc->frame_size_planned;
2396 if( !t->b_thread_active )
2398 bits = X264_MAX(bits, t->rc->frame_size_estimated);
2399 predicted_bits += (int64_t)bits;
2405 if( h->i_frame < h->i_thread_frames )
2406 predicted_bits += (int64_t)h->i_frame * rcc->bitrate / rcc->fps;
2408 predicted_bits += (int64_t)(h->i_thread_frames - 1) * rcc->bitrate / rcc->fps;
2411 /* Adjust ABR buffer based on distance to the end of the video. */
2412 if( rcc->num_entries > h->i_frame )
2414 double final_bits = rcc->entry[rcc->num_entries-1].expected_bits;
2415 double video_pos = rce.expected_bits / final_bits;
2416 double scale_factor = sqrt( (1 - video_pos) * rcc->num_entries );
2417 abr_buffer *= 0.5 * X264_MAX( scale_factor, 0.5 );
2420 diff = predicted_bits - (int64_t)rce.expected_bits;
2422 q /= x264_clip3f((double)(abr_buffer - diff) / abr_buffer, .5, 2);
2423 if( ((h->i_frame + 1 - h->i_thread_frames) >= rcc->fps) &&
2424 (rcc->expected_bits_sum > 0))
2426 /* Adjust quant based on the difference between
2427 * achieved and expected bitrate so far */
2428 double cur_time = (double)h->i_frame / rcc->num_entries;
2429 double w = x264_clip3f( cur_time*100, 0.0, 1.0 );
2430 q *= pow( (double)total_bits / rcc->expected_bits_sum, w );
2434 /* Do not overflow vbv */
2435 double expected_size = qscale2bits( &rce, q );
2436 double expected_vbv = rcc->buffer_fill + rcc->buffer_rate - expected_size;
2437 double expected_fullness = rce.expected_vbv / rcc->buffer_size;
2438 double qmax = q*(2 - expected_fullness);
2439 double size_constraint = 1 + expected_fullness;
2440 qmax = X264_MAX( qmax, rce.new_qscale );
2441 if( expected_fullness < .05 )
2443 qmax = X264_MIN(qmax, lmax);
2444 while( ((expected_vbv < rce.expected_vbv/size_constraint) && (q < qmax)) ||
2445 ((expected_vbv < 0) && (q < lmax)))
2448 expected_size = qscale2bits(&rce, q);
2449 expected_vbv = rcc->buffer_fill + rcc->buffer_rate - expected_size;
2451 rcc->last_satd = x264_rc_analyse_slice( h );
2453 q = x264_clip3f( q, lmin, lmax );
2455 else /* 1pass ABR */
2457 /* Calculate the quantizer which would have produced the desired
2458 * average bitrate if it had been applied to all frames so far.
2459 * Then modulate that quant based on the current frame's complexity
2460 * relative to the average complexity so far (using the 2pass RCEQ).
2461 * Then bias the quant up or down if total size so far was far from
2463 * Result: Depending on the value of rate_tolerance, there is a
2464 * tradeoff between quality and bitrate precision. But at large
2465 * tolerances, the bit distribution approaches that of 2pass. */
2467 double wanted_bits, overflow = 1;
2469 rcc->last_satd = x264_rc_analyse_slice( h );
2470 rcc->short_term_cplxsum *= 0.5;
2471 rcc->short_term_cplxcount *= 0.5;
2472 rcc->short_term_cplxsum += rcc->last_satd / (CLIP_DURATION(h->fenc->f_duration) / BASE_FRAME_DURATION);
2473 rcc->short_term_cplxcount ++;
2475 rce.tex_bits = rcc->last_satd;
2476 rce.blurred_complexity = rcc->short_term_cplxsum / rcc->short_term_cplxcount;
2478 rce.p_count = rcc->nmb;
2482 rce.pict_type = pict_type;
2483 rce.i_duration = h->fenc->i_duration;
2485 if( h->param.rc.i_rc_method == X264_RC_CRF )
2487 q = get_qscale( h, &rce, rcc->rate_factor_constant, h->fenc->i_frame );
2491 q = get_qscale( h, &rce, rcc->wanted_bits_window / rcc->cplxr_sum, h->fenc->i_frame );
2493 /* ABR code can potentially be counterproductive in CBR, so just don't bother.
2494 * Don't run it if the frame complexity is zero either. */
2495 if( !rcc->b_vbv_min_rate && rcc->last_satd )
2497 // FIXME is it simpler to keep track of wanted_bits in ratecontrol_end?
2498 int i_frame_done = h->i_frame + 1 - h->i_thread_frames;
2499 double time_done = i_frame_done / rcc->fps;
2500 if( h->param.b_vfr_input && i_frame_done > 0 )
2501 time_done = ((double)(h->fenc->i_reordered_pts - h->i_reordered_pts_delay)) * h->param.i_timebase_num / h->param.i_timebase_den;
2502 wanted_bits = time_done * rcc->bitrate;
2503 if( wanted_bits > 0 )
2505 abr_buffer *= X264_MAX( 1, sqrt( time_done ) );
2506 overflow = x264_clip3f( 1.0 + (total_bits - wanted_bits) / abr_buffer, .5, 2 );
2512 if( pict_type == SLICE_TYPE_I && h->param.i_keyint_max > 1
2513 /* should test _next_ pict type, but that isn't decided yet */
2514 && rcc->last_non_b_pict_type != SLICE_TYPE_I )
2516 q = qp2qscale( rcc->accum_p_qp / rcc->accum_p_norm );
2517 q /= fabs( h->param.rc.f_ip_factor );
2519 else if( h->i_frame > 0 )
2521 if( h->param.rc.i_rc_method != X264_RC_CRF )
2523 /* Asymmetric clipping, because symmetric would prevent
2524 * overflow control in areas of rapidly oscillating complexity */
2525 double lmin = rcc->last_qscale_for[pict_type] / rcc->lstep;
2526 double lmax = rcc->last_qscale_for[pict_type] * rcc->lstep;
2527 if( overflow > 1.1 && h->i_frame > 3 )
2529 else if( overflow < 0.9 )
2532 q = x264_clip3f(q, lmin, lmax);
2535 else if( h->param.rc.i_rc_method == X264_RC_CRF && rcc->qcompress != 1 )
2537 q = qp2qscale( ABR_INIT_QP ) / fabs( h->param.rc.f_ip_factor );
2539 rcc->qp_novbv = qscale2qp( q );
2541 //FIXME use get_diff_limited_q() ?
2542 q = clip_qscale( h, pict_type, q );
2545 rcc->last_qscale_for[pict_type] =
2546 rcc->last_qscale = q;
2548 if( !(rcc->b_2pass && !rcc->b_vbv) && h->fenc->i_frame == 0 )
2549 rcc->last_qscale_for[SLICE_TYPE_P] = q * fabs( h->param.rc.f_ip_factor );
2551 if( rcc->b_2pass && rcc->b_vbv )
2552 rcc->frame_size_planned = qscale2bits(&rce, q);
2554 rcc->frame_size_planned = predict_size( &rcc->pred[h->sh.i_type], q, rcc->last_satd );
2556 /* Always use up the whole VBV in this case. */
2557 if( rcc->single_frame_vbv )
2558 rcc->frame_size_planned = rcc->buffer_rate;
2559 /* Limit planned size by MinCR */
2561 rcc->frame_size_planned = X264_MIN( rcc->frame_size_planned, rcc->frame_size_maximum );
2562 h->rc->frame_size_estimated = rcc->frame_size_planned;
2567 static void x264_threads_normalize_predictors( x264_t *h )
2569 double totalsize = 0;
2570 for( int i = 0; i < h->param.i_threads; i++ )
2571 totalsize += h->thread[i]->rc->slice_size_planned;
2572 double factor = h->rc->frame_size_planned / totalsize;
2573 for( int i = 0; i < h->param.i_threads; i++ )
2574 h->thread[i]->rc->slice_size_planned *= factor;
2577 void x264_threads_distribute_ratecontrol( x264_t *h )
2580 x264_ratecontrol_t *rc = h->rc;
2582 float qscale = qp2qscale( rc->qpm );
2584 /* Initialize row predictors */
2585 if( h->i_frame == 0 )
2586 for( int i = 0; i < h->param.i_threads; i++ )
2588 x264_ratecontrol_t *t = h->thread[i]->rc;
2589 memcpy( t->row_preds, rc->row_preds, sizeof(rc->row_preds) );
2592 for( int i = 0; i < h->param.i_threads; i++ )
2594 x264_t *t = h->thread[i];
2595 memcpy( t->rc, rc, offsetof(x264_ratecontrol_t, row_pred) );
2596 t->rc->row_pred = &t->rc->row_preds[h->sh.i_type];
2597 /* Calculate the planned slice size. */
2598 if( rc->b_vbv && rc->frame_size_planned )
2601 for( row = t->i_threadslice_start; row < t->i_threadslice_end; row++ )
2602 size += h->fdec->i_row_satd[row];
2603 t->rc->slice_size_planned = predict_size( &rc->pred[h->sh.i_type + (i+1)*5], qscale, size );
2606 t->rc->slice_size_planned = 0;
2608 if( rc->b_vbv && rc->frame_size_planned )
2610 x264_threads_normalize_predictors( h );
2612 if( rc->single_frame_vbv )
2614 /* Compensate for our max frame error threshold: give more bits (proportionally) to smaller slices. */
2615 for( int i = 0; i < h->param.i_threads; i++ )
2617 x264_t *t = h->thread[i];
2618 float max_frame_error = X264_MAX( 0.05, 1.0 / (t->i_threadslice_end - t->i_threadslice_start) );
2619 t->rc->slice_size_planned += 2 * max_frame_error * rc->frame_size_planned;
2621 x264_threads_normalize_predictors( h );
2624 for( int i = 0; i < h->param.i_threads; i++ )
2625 h->thread[i]->rc->frame_size_estimated = h->thread[i]->rc->slice_size_planned;
2629 void x264_threads_merge_ratecontrol( x264_t *h )
2631 x264_ratecontrol_t *rc = h->rc;
2634 for( int i = 0; i < h->param.i_threads; i++ )
2636 x264_t *t = h->thread[i];
2637 x264_ratecontrol_t *rct = h->thread[i]->rc;
2638 if( h->param.rc.i_vbv_buffer_size )
2641 for( int row = t->i_threadslice_start; row < t->i_threadslice_end; row++ )
2642 size += h->fdec->i_row_satd[row];
2643 int bits = t->stat.frame.i_mv_bits + t->stat.frame.i_tex_bits + t->stat.frame.i_misc_bits;
2644 int mb_count = (t->i_threadslice_end - t->i_threadslice_start) * h->mb.i_mb_width;
2645 update_predictor( &rc->pred[h->sh.i_type+(i+1)*5], qp2qscale( rct->qpa_rc/mb_count ), size, bits );
2649 rc->qpa_rc += rct->qpa_rc;
2650 rc->qpa_aq += rct->qpa_aq;
2654 void x264_thread_sync_ratecontrol( x264_t *cur, x264_t *prev, x264_t *next )
2658 #define COPY(var) memcpy(&cur->rc->var, &prev->rc->var, sizeof(cur->rc->var))
2659 /* these vars are updated in x264_ratecontrol_start()
2660 * so copy them from the context that most recently started (prev)
2661 * to the context that's about to start (cur). */
2666 COPY(last_qscale_for);
2667 COPY(last_non_b_pict_type);
2668 COPY(short_term_cplxsum);
2669 COPY(short_term_cplxcount);
2672 COPY(mbtree.qpbuf_pos);
2673 /* these vars can be updated by x264_ratecontrol_init_reconfigurable */
2678 COPY(single_frame_vbv);
2680 COPY(rate_factor_constant);
2681 COPY(rate_factor_max_increment);
2686 #define COPY(var) next->rc->var = cur->rc->var
2687 /* these vars are updated in x264_ratecontrol_end()
2688 * so copy them from the context that most recently ended (cur)
2689 * to the context that's about to end (next) */
2691 COPY(expected_bits_sum);
2692 COPY(filler_bits_sum);
2693 COPY(wanted_bits_window);
2695 COPY(initial_cpb_removal_delay);
2696 COPY(initial_cpb_removal_delay_offset);
2697 COPY(nrt_first_access_unit);
2698 COPY(previous_cpb_final_arrival_time);
2701 //FIXME row_preds[] (not strictly necessary, but would improve prediction)
2702 /* the rest of the variables are either constant or thread-local */
2705 static int find_underflow( x264_t *h, double *fills, int *t0, int *t1, int over )
2707 /* find an interval ending on an overflow or underflow (depending on whether
2708 * we're adding or removing bits), and starting on the earliest frame that
2709 * can influence the buffer fill of that end frame. */
2710 x264_ratecontrol_t *rcc = h->rc;
2711 const double buffer_min = (over ? .1 : .1) * rcc->buffer_size;
2712 const double buffer_max = .9 * rcc->buffer_size;
2713 double fill = fills[*t0-1];
2714 double parity = over ? 1. : -1.;
2715 int start = -1, end = -1;
2716 for( int i = *t0; i < rcc->num_entries; i++ )
2718 fill += (rcc->entry[i].i_cpb_duration * rcc->vbv_max_rate * h->sps->vui.i_num_units_in_tick / h->sps->vui.i_time_scale -
2719 qscale2bits( &rcc->entry[i], rcc->entry[i].new_qscale )) * parity;
2720 fill = x264_clip3f(fill, 0, rcc->buffer_size);
2722 if( fill <= buffer_min || i == 0 )
2728 else if( fill >= buffer_max && start >= 0 )
2733 return start >= 0 && end >= 0;
2736 static int fix_underflow( x264_t *h, int t0, int t1, double adjustment, double qscale_min, double qscale_max)
2738 x264_ratecontrol_t *rcc = h->rc;
2739 double qscale_orig, qscale_new;
2743 for( int i = t0; i <= t1; i++ )
2745 qscale_orig = rcc->entry[i].new_qscale;
2746 qscale_orig = x264_clip3f( qscale_orig, qscale_min, qscale_max );
2747 qscale_new = qscale_orig * adjustment;
2748 qscale_new = x264_clip3f( qscale_new, qscale_min, qscale_max );
2749 rcc->entry[i].new_qscale = qscale_new;
2750 adjusted = adjusted || (qscale_new != qscale_orig);
2755 static double count_expected_bits( x264_t *h )
2757 x264_ratecontrol_t *rcc = h->rc;
2758 double expected_bits = 0;
2759 for( int i = 0; i < rcc->num_entries; i++ )
2761 ratecontrol_entry_t *rce = &rcc->entry[i];
2762 rce->expected_bits = expected_bits;
2763 expected_bits += qscale2bits( rce, rce->new_qscale );
2765 return expected_bits;
2768 static int vbv_pass2( x264_t *h, double all_available_bits )
2770 /* for each interval of buffer_full .. underflow, uniformly increase the qp of all
2771 * frames in the interval until either buffer is full at some intermediate frame or the
2772 * last frame in the interval no longer underflows. Recompute intervals and repeat.
2773 * Then do the converse to put bits back into overflow areas until target size is met */
2775 x264_ratecontrol_t *rcc = h->rc;
2777 double expected_bits = 0;
2779 double prev_bits = 0;
2781 double qscale_min = qp2qscale( h->param.rc.i_qp_min );
2782 double qscale_max = qp2qscale( h->param.rc.i_qp_max );
2784 int adj_min, adj_max;
2785 CHECKED_MALLOC( fills, (rcc->num_entries+1)*sizeof(double) );
2789 /* adjust overall stream size */
2793 prev_bits = expected_bits;
2796 { /* not first iteration */
2797 adjustment = X264_MAX(X264_MIN(expected_bits / all_available_bits, 0.999), 0.9);
2798 fills[-1] = rcc->buffer_size * h->param.rc.f_vbv_buffer_init;
2802 while(adj_min && find_underflow( h, fills, &t0, &t1, 1 ))
2804 adj_min = fix_underflow( h, t0, t1, adjustment, qscale_min, qscale_max );
2809 fills[-1] = rcc->buffer_size * (1. - h->param.rc.f_vbv_buffer_init);
2811 /* fix underflows -- should be done after overflow, as we'd better undersize target than underflowing VBV */
2813 while( adj_max && find_underflow( h, fills, &t0, &t1, 0 ) )
2814 adj_max = fix_underflow( h, t0, t1, 1.001, qscale_min, qscale_max );
2816 expected_bits = count_expected_bits( h );
2817 } while( (expected_bits < .995*all_available_bits) && ((int64_t)(expected_bits+.5) > (int64_t)(prev_bits+.5)) );
2820 x264_log( h, X264_LOG_WARNING, "vbv-maxrate issue, qpmax or vbv-maxrate too low\n");
2822 /* store expected vbv filling values for tracking when encoding */
2823 for( int i = 0; i < rcc->num_entries; i++ )
2824 rcc->entry[i].expected_vbv = rcc->buffer_size - fills[i];
2826 x264_free( fills-1 );
2832 static int init_pass2( x264_t *h )
2834 x264_ratecontrol_t *rcc = h->rc;
2835 uint64_t all_const_bits = 0;
2836 double timescale = (double)h->sps->vui.i_num_units_in_tick / h->sps->vui.i_time_scale;
2837 double duration = 0;
2838 for( int i = 0; i < rcc->num_entries; i++ )
2839 duration += rcc->entry[i].i_duration;
2840 duration *= timescale;
2841 uint64_t all_available_bits = h->param.rc.i_bitrate * 1000. * duration;
2842 double rate_factor, step_mult;
2843 double qblur = h->param.rc.f_qblur;
2844 double cplxblur = h->param.rc.f_complexity_blur;
2845 const int filter_size = (int)(qblur*4) | 1;
2846 double expected_bits;
2847 double *qscale, *blurred_qscale;
2848 double base_cplx = h->mb.i_mb_count * (h->param.i_bframe ? 120 : 80);
2850 /* find total/average complexity & const_bits */
2851 for( int i = 0; i < rcc->num_entries; i++ )
2853 ratecontrol_entry_t *rce = &rcc->entry[i];
2854 all_const_bits += rce->misc_bits;
2857 if( all_available_bits < all_const_bits)
2859 x264_log( h, X264_LOG_ERROR, "requested bitrate is too low. estimated minimum is %d kbps\n",
2860 (int)(all_const_bits * rcc->fps / (rcc->num_entries * 1000.)) );
2864 /* Blur complexities, to reduce local fluctuation of QP.
2865 * We don't blur the QPs directly, because then one very simple frame
2866 * could drag down the QP of a nearby complex frame and give it more
2867 * bits than intended. */
2868 for( int i = 0; i < rcc->num_entries; i++ )
2870 ratecontrol_entry_t *rce = &rcc->entry[i];
2871 double weight_sum = 0;
2872 double cplx_sum = 0;
2873 double weight = 1.0;
2874 double gaussian_weight;
2875 /* weighted average of cplx of future frames */
2876 for( int j = 1; j < cplxblur*2 && j < rcc->num_entries-i; j++ )
2878 ratecontrol_entry_t *rcj = &rcc->entry[i+j];
2879 double frame_duration = CLIP_DURATION(rcj->i_duration * timescale) / BASE_FRAME_DURATION;
2880 weight *= 1 - pow( (float)rcj->i_count / rcc->nmb, 2 );
2881 if( weight < .0001 )
2883 gaussian_weight = weight * exp( -j*j/200.0 );
2884 weight_sum += gaussian_weight;
2885 cplx_sum += gaussian_weight * (qscale2bits( rcj, 1 ) - rcj->misc_bits) / frame_duration;
2887 /* weighted average of cplx of past frames */
2889 for( int j = 0; j <= cplxblur*2 && j <= i; j++ )
2891 ratecontrol_entry_t *rcj = &rcc->entry[i-j];
2892 double frame_duration = CLIP_DURATION(rcj->i_duration * timescale) / BASE_FRAME_DURATION;
2893 gaussian_weight = weight * exp( -j*j/200.0 );
2894 weight_sum += gaussian_weight;
2895 cplx_sum += gaussian_weight * (qscale2bits( rcj, 1 ) - rcj->misc_bits) / frame_duration;
2896 weight *= 1 - pow( (float)rcj->i_count / rcc->nmb, 2 );
2897 if( weight < .0001 )
2900 rce->blurred_complexity = cplx_sum / weight_sum;
2903 CHECKED_MALLOC( qscale, sizeof(double)*rcc->num_entries );
2904 if( filter_size > 1 )
2905 CHECKED_MALLOC( blurred_qscale, sizeof(double)*rcc->num_entries );
2907 blurred_qscale = qscale;
2909 /* Search for a factor which, when multiplied by the RCEQ values from
2910 * each frame, adds up to the desired total size.
2911 * There is no exact closed-form solution because of VBV constraints and
2912 * because qscale2bits is not invertible, but we can start with the simple
2913 * approximation of scaling the 1st pass by the ratio of bitrates.
2914 * The search range is probably overkill, but speed doesn't matter here. */
2917 for( int i = 0; i < rcc->num_entries; i++ )
2919 double q = get_qscale(h, &rcc->entry[i], 1.0, i);
2920 expected_bits += qscale2bits(&rcc->entry[i], q);
2921 rcc->last_qscale_for[rcc->entry[i].pict_type] = q;
2923 step_mult = all_available_bits / expected_bits;
2926 for( double step = 1E4 * step_mult; step > 1E-7 * step_mult; step *= 0.5)
2929 rate_factor += step;
2931 rcc->last_non_b_pict_type = -1;
2932 rcc->last_accum_p_norm = 1;
2933 rcc->accum_p_norm = 0;
2935 rcc->last_qscale_for[0] =
2936 rcc->last_qscale_for[1] =
2937 rcc->last_qscale_for[2] = pow( base_cplx, 1 - rcc->qcompress ) / rate_factor;
2940 for( int i = 0; i < rcc->num_entries; i++ )
2942 qscale[i] = get_qscale( h, &rcc->entry[i], rate_factor, -1 );
2943 rcc->last_qscale_for[rcc->entry[i].pict_type] = qscale[i];
2946 /* fixed I/B qscale relative to P */
2947 for( int i = rcc->num_entries-1; i >= 0; i-- )
2949 qscale[i] = get_diff_limited_q( h, &rcc->entry[i], qscale[i], i );
2950 assert(qscale[i] >= 0);
2954 if( filter_size > 1 )
2956 assert( filter_size%2 == 1 );
2957 for( int i = 0; i < rcc->num_entries; i++ )
2959 ratecontrol_entry_t *rce = &rcc->entry[i];
2960 double q = 0.0, sum = 0.0;
2962 for( int j = 0; j < filter_size; j++ )
2964 int idx = i+j-filter_size/2;
2966 double coeff = qblur==0 ? 1.0 : exp( -d*d/(qblur*qblur) );
2967 if( idx < 0 || idx >= rcc->num_entries )
2969 if( rce->pict_type != rcc->entry[idx].pict_type )
2971 q += qscale[idx] * coeff;
2974 blurred_qscale[i] = q/sum;
2978 /* find expected bits */
2979 for( int i = 0; i < rcc->num_entries; i++ )
2981 ratecontrol_entry_t *rce = &rcc->entry[i];
2982 rce->new_qscale = clip_qscale( h, rce->pict_type, blurred_qscale[i] );
2983 assert(rce->new_qscale >= 0);
2984 expected_bits += qscale2bits( rce, rce->new_qscale );
2987 if( expected_bits > all_available_bits )
2988 rate_factor -= step;
2991 x264_free( qscale );
2992 if( filter_size > 1 )
2993 x264_free( blurred_qscale );
2996 if( vbv_pass2( h, all_available_bits ) )
2998 expected_bits = count_expected_bits( h );
3000 if( fabs( expected_bits/all_available_bits - 1.0 ) > 0.01 )
3003 for( int i = 0; i < rcc->num_entries; i++ )
3004 avgq += rcc->entry[i].new_qscale;
3005 avgq = qscale2qp( avgq / rcc->num_entries );
3007 if( expected_bits > all_available_bits || !rcc->b_vbv )
3008 x264_log( h, X264_LOG_WARNING, "Error: 2pass curve failed to converge\n" );
3009 x264_log( h, X264_LOG_WARNING, "target: %.2f kbit/s, expected: %.2f kbit/s, avg QP: %.4f\n",
3010 (float)h->param.rc.i_bitrate,
3011 expected_bits * rcc->fps / (rcc->num_entries * 1000.),
3013 if( expected_bits < all_available_bits && avgq < h->param.rc.i_qp_min + 2 )
3015 if( h->param.rc.i_qp_min > 0 )
3016 x264_log( h, X264_LOG_WARNING, "try reducing target bitrate or reducing qp_min (currently %d)\n", h->param.rc.i_qp_min );
3018 x264_log( h, X264_LOG_WARNING, "try reducing target bitrate\n" );
3020 else if( expected_bits > all_available_bits && avgq > h->param.rc.i_qp_max - 2 )
3022 if( h->param.rc.i_qp_max < QP_MAX )
3023 x264_log( h, X264_LOG_WARNING, "try increasing target bitrate or increasing qp_max (currently %d)\n", h->param.rc.i_qp_max );
3025 x264_log( h, X264_LOG_WARNING, "try increasing target bitrate\n");
3027 else if( !(rcc->b_2pass && rcc->b_vbv) )
3028 x264_log( h, X264_LOG_WARNING, "internal error\n" );