]> git.sesse.net Git - vlc/blob - include/vlc_config.h
Revert "Prefer setenv to putenv (evenmore with local variables)."
[vlc] / include / vlc_config.h
1 /*****************************************************************************
2  * vlc_config.h: limits and configuration
3  * Defines all compilation-time configuration constants and size limits
4  *****************************************************************************
5  * Copyright (C) 1999-2003 the VideoLAN team
6  *
7  * Authors: Vincent Seguin <seguin@via.ecp.fr>
8  *          Samuel Hocevar <sam@via.ecp.fr>
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License as published by
12  * the Free Software Foundation; either version 2 of the License, or
13  * (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA 02110-1301, USA.
23  *****************************************************************************/
24
25 /* Conventions regarding names of symbols and variables
26  * ----------------------------------------------------
27  *
28  * - Symbols should begin with a prefix indicating in which module they are
29  *   used, such as INTF_, VOUT_ or AOUT_.
30  */
31
32 /*****************************************************************************
33  * General configuration
34  *****************************************************************************/
35
36 #define CLOCK_FREQ 1000000
37
38
39 /* When creating or destroying threads in blocking mode, delay to poll thread
40  * status */
41 #define THREAD_SLEEP                    ((mtime_t)(0.010*CLOCK_FREQ))
42
43 /*****************************************************************************
44  * Interface configuration
45  *****************************************************************************/
46
47 /* Base delay in micro second for interface sleeps */
48 #define INTF_IDLE_SLEEP                 ((mtime_t)(0.050*CLOCK_FREQ))
49
50 /* Step for changing gamma, and minimum and maximum values */
51 #define INTF_GAMMA_STEP                 .1
52 #define INTF_GAMMA_LIMIT                3
53
54 /*****************************************************************************
55  * Input thread configuration
56  *****************************************************************************/
57
58 #define DEFAULT_INPUT_ACTIVITY 1
59 #define TRANSCODE_ACTIVITY 10
60
61 /* Used in ErrorThread */
62 #define INPUT_IDLE_SLEEP                ((mtime_t)(0.100*CLOCK_FREQ))
63
64 /* Time to wait in case of read error */
65 #define INPUT_ERROR_SLEEP               ((mtime_t)(0.10*CLOCK_FREQ))
66
67 /* Number of read() calls needed until we check the file size through
68  * fstat() */
69 #define INPUT_FSTAT_NB_READS            10
70
71 /*
72  * General limitations
73  */
74
75 /* Duration between the time we receive the data packet, and the time we will
76  * mark it to be presented */
77 #define DEFAULT_PTS_DELAY               (mtime_t)(.3*CLOCK_FREQ)
78
79 /* DVD and VCD devices */
80 #if !defined( WIN32 ) && !defined( UNDER_CE )
81 #   define CD_DEVICE      "/dev/cdrom"
82 #   define DVD_DEVICE     "/dev/dvd"
83 #else
84 #   define CD_DEVICE      "D:"
85 #   define DVD_DEVICE     NULL
86 #endif
87 #define VCD_DEVICE        CD_DEVICE
88 #define CDAUDIO_DEVICE    CD_DEVICE
89
90 /*****************************************************************************
91  * Audio configuration
92  *****************************************************************************/
93
94 /* Volume */
95 /* If you are coding an interface, please see src/audio_output/intf.c */
96 #define AOUT_VOLUME_DEFAULT             256
97 #define AOUT_VOLUME_STEP                32
98 #define AOUT_VOLUME_MAX                 1024
99 #define AOUT_VOLUME_MIN                 0
100
101 /* Max number of pre-filters per input, and max number of post-filters */
102 #define AOUT_MAX_FILTERS                10
103
104 /* Max number of inputs */
105 #define AOUT_MAX_INPUTS                 5
106
107 /* Buffers which arrive in advance of more than AOUT_MAX_ADVANCE_TIME
108  * will be considered as bogus and be trashed */
109 #define AOUT_MAX_ADVANCE_TIME           (mtime_t)(DEFAULT_PTS_DELAY * 5)
110
111 /* Buffers which arrive in advance of more than AOUT_MAX_PREPARE_TIME
112  * will cause the calling thread to sleep */
113 #define AOUT_MAX_PREPARE_TIME           (mtime_t)(.5*CLOCK_FREQ)
114
115 /* Buffers which arrive after pts - AOUT_MIN_PREPARE_TIME will be trashed
116  * to avoid too heavy resampling */
117 #define AOUT_MIN_PREPARE_TIME           (mtime_t)(.04*CLOCK_FREQ)
118
119 /* Max acceptable delay between the coded PTS and the actual presentation
120  * time, without resampling */
121 #define AOUT_PTS_TOLERANCE              (mtime_t)(.04*CLOCK_FREQ)
122
123 /* Max acceptable resampling (in %) */
124 #define AOUT_MAX_RESAMPLING             10
125
126 /*****************************************************************************
127  * Video configuration
128  *****************************************************************************/
129
130 /*
131  * Default settings for video output threads
132  */
133
134 /* Multiplier value for aspect ratio calculation (2^7 * 3^3 * 5^3) */
135 #define VOUT_ASPECT_FACTOR              432000
136
137 /* Maximum width of a scaled source picture - this should be relatively high,
138  * since higher stream values will result in no display at all. */
139 #define VOUT_MAX_WIDTH                  4096
140
141 /* Number of planes in a picture */
142 #define VOUT_MAX_PLANES                 5
143
144 /* Video heap size - remember that a decompressed picture is big
145  * (~1 Mbyte) before using huge values */
146 #define VOUT_MAX_PICTURES               8
147
148 /* Minimum number of direct pictures the video output will accept without
149  * creating additional pictures in system memory */
150 #define VOUT_MIN_DIRECT_PICTURES        6
151
152 /* Number of simultaneous subpictures */
153 #define VOUT_MAX_SUBPICTURES            8
154
155 /* Statistics are displayed every n loops (=~ pictures) */
156 #define VOUT_STATS_NB_LOOPS             100
157
158 /*
159  * Time settings
160  */
161
162 /* Time during which the thread will sleep if it has nothing to
163  * display (in micro-seconds) */
164 #define VOUT_IDLE_SLEEP                 ((int)(0.020*CLOCK_FREQ))
165
166 /* Maximum lap of time allowed between the beginning of rendering and
167  * display. If, compared to the current date, the next image is too
168  * late, the thread will perform an idle loop. This time should be
169  * at least VOUT_IDLE_SLEEP plus the time required to render a few
170  * images, to avoid trashing of decoded images */
171 #define VOUT_DISPLAY_DELAY              ((int)(0.200*CLOCK_FREQ))
172
173 /* Pictures which are VOUT_BOGUS_DELAY or more in advance probably have
174  * a bogus PTS and won't be displayed */
175 #define VOUT_BOGUS_DELAY                ((mtime_t)(DEFAULT_PTS_DELAY * 30))
176
177 /* Delay (in microseconds) before an idle screen is displayed */
178 #define VOUT_IDLE_DELAY                 (5*CLOCK_FREQ)
179
180 /* Number of pictures required to computes the FPS rate */
181 #define VOUT_FPS_SAMPLES                20
182
183 /* Better be in advance when awakening than late... */
184 #define VOUT_MWAIT_TOLERANCE            ((mtime_t)(0.020*CLOCK_FREQ))
185
186 /* Time to sleep when waiting for a buffer (from vout or the video fifo).
187  * It should be approximately the time needed to perform a complete picture
188  * loop. Since it only happens when the video heap is full, it does not need
189  * to be too low, even if it blocks the decoder. */
190 #define VOUT_OUTMEM_SLEEP               ((mtime_t)(0.020*CLOCK_FREQ))
191
192 /* The default video output window title */
193 #define VOUT_TITLE                      "VLC"
194
195 /*****************************************************************************
196  * Messages and console interfaces configuration
197  *****************************************************************************/
198
199 /* Maximal size of a message to be stored in the mesage queue,
200  * it is needed when vasprintf is not available */
201 #define INTF_MAX_MSG_SIZE               512
202
203 /* Maximal size of the message queue - in case of overflow, all messages in the
204  * queue are printed, but not sent to the threads */
205 #define VLC_MSG_QSIZE                   256
206
207 /* Maximal depth of the object tree output by vlc_dumpstructure */
208 #define MAX_DUMPSTRUCTURE_DEPTH         100