#include "mixer.h"
#include <assert.h>
+#include <endian.h>
#include <epoxy/egl.h>
#include <movit/effect_chain.h>
#include <movit/effect_util.h>
#include <sys/time.h>
#include <time.h>
#include <algorithm>
+#include <chrono>
#include <cmath>
#include <condition_variable>
#include <cstddef>
using namespace movit;
using namespace std;
+using namespace std::chrono;
using namespace std::placeholders;
using namespace bmusb;
uint32_t s2 = *src++;
uint32_t s3 = *src++;
uint32_t s = s1 | (s1 << 8) | (s2 << 16) | (s3 << 24);
- dst[i * out_channels + j] = int(s) * (1.0f / 4294967296.0f);
+ dst[i * out_channels + j] = int(s) * (1.0f / 2147483648.0f);
}
src += 3 * (in_channels - out_channels);
}
assert(in_channels >= out_channels);
for (size_t i = 0; i < num_samples; ++i) {
for (size_t j = 0; j < out_channels; ++j) {
- // Note: Assumes little-endian.
- int32_t s = *(int32_t *)src;
- dst[i * out_channels + j] = s * (1.0f / 4294967296.0f);
+ int32_t s = le32toh(*(int32_t *)src);
+ dst[i * out_channels + j] = s * (1.0f / 2147483648.0f);
src += 4;
}
src += 4 * (in_channels - out_channels);
unsigned num_fake_cards = 0;
for ( ; card_index < num_cards; ++card_index, ++num_fake_cards) {
- configure_card(card_index, new FakeCapture(WIDTH, HEIGHT, FAKE_FPS, OUTPUT_FREQUENCY, card_index), /*is_fake_capture=*/true);
+ FakeCapture *capture = new FakeCapture(WIDTH, HEIGHT, FAKE_FPS, OUTPUT_FREQUENCY, card_index, global_flags.fake_cards_audio);
+ configure_card(card_index, capture, /*is_fake_capture=*/true);
}
if (num_fake_cards > 0) {
is_mode_scanning[card_index] = false;
} else {
static constexpr double switch_time_s = 0.5; // Should be enough time for the signal to stabilize.
- timespec now;
- clock_gettime(CLOCK_MONOTONIC, &now);
- double sec_since_last_switch = (now.tv_sec - last_mode_scan_change[card_index].tv_sec) +
- 1e-9 * (now.tv_nsec - last_mode_scan_change[card_index].tv_nsec);
+ steady_clock::time_point now = steady_clock::now();
+ double sec_since_last_switch = duration<double>(steady_clock::now() - last_mode_scan_change[card_index]).count();
if (sec_since_last_switch > switch_time_s) {
// It isn't this mode; try the next one.
mode_scanlist_index[card_index]++;
PBOFrameAllocator::Userdata *userdata = (PBOFrameAllocator::Userdata *)video_frame.userdata;
unsigned num_fields = video_format.interlaced ? 2 : 1;
- timespec frame_upload_start;
+ steady_clock::time_point frame_upload_start;
if (video_format.interlaced) {
// Send the two fields along as separate frames; the other side will need to add
// a deinterlacer to actually get this right.
assert(frame_length % 2 == 0);
frame_length /= 2;
num_fields = 2;
- clock_gettime(CLOCK_MONOTONIC, &frame_upload_start);
+ frame_upload_start = steady_clock::now();
}
userdata->last_interlaced = video_format.interlaced;
userdata->last_has_signal = video_format.has_signal;
// against the video display, although the latter is not as critical.)
// This requires our system clock to be reasonably close to the
// video clock, but that's not an unreasonable assumption.
- timespec second_field_start;
- second_field_start.tv_nsec = frame_upload_start.tv_nsec +
- frame_length * 1000000000 / TIMEBASE;
- second_field_start.tv_sec = frame_upload_start.tv_sec +
- second_field_start.tv_nsec / 1000000000;
- second_field_start.tv_nsec %= 1000000000;
-
- while (clock_nanosleep(CLOCK_MONOTONIC, TIMER_ABSTIME,
- &second_field_start, nullptr) == -1 &&
- errno == EINTR) ;
+ steady_clock::time_point second_field_start = frame_upload_start +
+ nanoseconds(frame_length * 1000000000 / TIMEBASE);
+ this_thread::sleep_until(second_field_start);
}
{
exit(1);
}
- struct timespec start, now;
- clock_gettime(CLOCK_MONOTONIC, &start);
+ steady_clock::time_point start, now;
+ start = steady_clock::now();
int frame = 0;
int stats_dropped_frames = 0;
}
}
- int64_t duration = new_frames[master_card_index].length;
- render_one_frame(duration);
+ int64_t frame_duration = new_frames[master_card_index].length;
+ render_one_frame(frame_duration);
++frame;
- pts_int += duration;
+ pts_int += frame_duration;
- clock_gettime(CLOCK_MONOTONIC, &now);
- double elapsed = now.tv_sec - start.tv_sec +
- 1e-9 * (now.tv_nsec - start.tv_nsec);
+ now = steady_clock::now();
+ double elapsed = duration<double>(now - start).count();
if (frame % 100 == 0) {
printf("%d frames (%d dropped) in %.3f seconds = %.1f fps (%.1f ms/frame)",
frame, stats_dropped_frames, elapsed, frame / elapsed,
CaptureCard *card = &cards[card_index];
if (card->capture->get_disconnected()) {
fprintf(stderr, "Card %u went away, replacing with a fake card.\n", card_index);
- configure_card(card_index, new FakeCapture(WIDTH, HEIGHT, FAKE_FPS, OUTPUT_FREQUENCY, card_index), /*is_fake_capture=*/true);
+ FakeCapture *capture = new FakeCapture(WIDTH, HEIGHT, FAKE_FPS, OUTPUT_FREQUENCY, card_index, global_flags.fake_cards_audio);
+ configure_card(card_index, capture, /*is_fake_capture=*/true);
card->queue_length_policy.reset(card_index);
card->capture->start_bm_capture();
}
// printf("limiter=%+5.1f compressor=%+5.1f\n", 20.0*log10(limiter_att), 20.0*log10(compressor_att));
- // Upsample 4x to find interpolated peak.
- peak_resampler.inp_data = samples_out.data();
- peak_resampler.inp_count = samples_out.size() / 2;
-
- vector<float> interpolated_samples_out;
- interpolated_samples_out.resize(samples_out.size());
- while (peak_resampler.inp_count > 0) { // About four iterations.
- peak_resampler.out_data = &interpolated_samples_out[0];
- peak_resampler.out_count = interpolated_samples_out.size() / 2;
- peak_resampler.process();
- size_t out_stereo_samples = interpolated_samples_out.size() / 2 - peak_resampler.out_count;
- peak = max<float>(peak, find_peak(interpolated_samples_out.data(), out_stereo_samples * 2));
- peak_resampler.out_data = nullptr;
- }
-
// At this point, we are most likely close to +0 LU, but all of our
// measurements have been on raw sample values, not R128 values.
// So we have a final makeup gain to get us to +0 LU; the gain
final_makeup_gain = m;
}
+ // Upsample 4x to find interpolated peak.
+ peak_resampler.inp_data = samples_out.data();
+ peak_resampler.inp_count = samples_out.size() / 2;
+
+ vector<float> interpolated_samples_out;
+ interpolated_samples_out.resize(samples_out.size());
+ while (peak_resampler.inp_count > 0) { // About four iterations.
+ peak_resampler.out_data = &interpolated_samples_out[0];
+ peak_resampler.out_count = interpolated_samples_out.size() / 2;
+ peak_resampler.process();
+ size_t out_stereo_samples = interpolated_samples_out.size() / 2 - peak_resampler.out_count;
+ peak = max<float>(peak, find_peak(interpolated_samples_out.data(), out_stereo_samples * 2));
+ peak_resampler.out_data = nullptr;
+ }
+
// Find R128 levels and L/R correlation.
vector<float> left, right;
deinterleave_samples(samples_out, &left, &right);
assert(!mode_scanlist[card_index].empty());
mode_scanlist_index[card_index] = 0;
cards[card_index].capture->set_video_mode(mode_scanlist[card_index][0]);
- clock_gettime(CLOCK_MONOTONIC, &last_mode_scan_change[card_index]);
+ last_mode_scan_change[card_index] = steady_clock::now();
}
Mixer::OutputChannel::~OutputChannel()
projects / nageru / blobdiff