struct diseqc_cmd_t
{
- struct dvb_diseqc_master_cmd cmd;
- uint32_t wait;
+ struct dvb_diseqc_master_cmd cmd;
+ uint32_t wait;
};
struct diseqc_cmd_t switch_cmds[] =
{
- { { { 0xe0, 0x10, 0x38, 0xf0, 0x00, 0x00 }, 4 }, 0 },
- { { { 0xe0, 0x10, 0x38, 0xf2, 0x00, 0x00 }, 4 }, 0 },
- { { { 0xe0, 0x10, 0x38, 0xf1, 0x00, 0x00 }, 4 }, 0 },
- { { { 0xe0, 0x10, 0x38, 0xf3, 0x00, 0x00 }, 4 }, 0 },
- { { { 0xe0, 0x10, 0x38, 0xf4, 0x00, 0x00 }, 4 }, 0 },
- { { { 0xe0, 0x10, 0x38, 0xf6, 0x00, 0x00 }, 4 }, 0 },
- { { { 0xe0, 0x10, 0x38, 0xf5, 0x00, 0x00 }, 4 }, 0 },
- { { { 0xe0, 0x10, 0x38, 0xf7, 0x00, 0x00 }, 4 }, 0 },
- { { { 0xe0, 0x10, 0x38, 0xf8, 0x00, 0x00 }, 4 }, 0 },
- { { { 0xe0, 0x10, 0x38, 0xfa, 0x00, 0x00 }, 4 }, 0 },
- { { { 0xe0, 0x10, 0x38, 0xf9, 0x00, 0x00 }, 4 }, 0 },
- { { { 0xe0, 0x10, 0x38, 0xfb, 0x00, 0x00 }, 4 }, 0 },
- { { { 0xe0, 0x10, 0x38, 0xfc, 0x00, 0x00 }, 4 }, 0 },
- { { { 0xe0, 0x10, 0x38, 0xfe, 0x00, 0x00 }, 4 }, 0 },
- { { { 0xe0, 0x10, 0x38, 0xfd, 0x00, 0x00 }, 4 }, 0 },
- { { { 0xe0, 0x10, 0x38, 0xff, 0x00, 0x00 }, 4 }, 0 }
+ { { { 0xe0, 0x10, 0x38, 0xf0, 0x00, 0x00 }, 4 }, 0 },
+ { { { 0xe0, 0x10, 0x38, 0xf2, 0x00, 0x00 }, 4 }, 0 },
+ { { { 0xe0, 0x10, 0x38, 0xf1, 0x00, 0x00 }, 4 }, 0 },
+ { { { 0xe0, 0x10, 0x38, 0xf3, 0x00, 0x00 }, 4 }, 0 },
+ { { { 0xe0, 0x10, 0x38, 0xf4, 0x00, 0x00 }, 4 }, 0 },
+ { { { 0xe0, 0x10, 0x38, 0xf6, 0x00, 0x00 }, 4 }, 0 },
+ { { { 0xe0, 0x10, 0x38, 0xf5, 0x00, 0x00 }, 4 }, 0 },
+ { { { 0xe0, 0x10, 0x38, 0xf7, 0x00, 0x00 }, 4 }, 0 },
+ { { { 0xe0, 0x10, 0x38, 0xf8, 0x00, 0x00 }, 4 }, 0 },
+ { { { 0xe0, 0x10, 0x38, 0xfa, 0x00, 0x00 }, 4 }, 0 },
+ { { { 0xe0, 0x10, 0x38, 0xf9, 0x00, 0x00 }, 4 }, 0 },
+ { { { 0xe0, 0x10, 0x38, 0xfb, 0x00, 0x00 }, 4 }, 0 },
+ { { { 0xe0, 0x10, 0x38, 0xfc, 0x00, 0x00 }, 4 }, 0 },
+ { { { 0xe0, 0x10, 0x38, 0xfe, 0x00, 0x00 }, 4 }, 0 },
+ { { { 0xe0, 0x10, 0x38, 0xfd, 0x00, 0x00 }, 4 }, 0 },
+ { { { 0xe0, 0x10, 0x38, 0xff, 0x00, 0x00 }, 4 }, 0 }
};
-static int ioctl_CheckQPSK(input_thread_t * p_input, int front);
+static int ioctl_CheckFrontend(input_thread_t * p_input, int front);
/*****************************************************************************
* ioctl_FrontendControl : commands the SEC device
*****************************************************************************/
int ioctl_FrontendControl(input_thread_t * p_input, int freq, int pol, int lnb_slof,
- int diseqc, unsigned int u_adapter, unsigned int u_device)
+ int diseqc, unsigned int u_adapter, unsigned int u_device)
{
struct dvb_diseqc_master_cmd cmd;
fe_sec_tone_mode_t tone;
fe_sec_voltage_t voltage;
int frontend;
- char front[] = FRONTEND;
- int i_len;
-
- i_len = sizeof(FRONTEND);
- if (snprintf(front, sizeof(FRONTEND), FRONTEND, u_adapter, u_device) >= i_len)
- {
- msg_Err(p_input, "snprintf() truncated string for FRONTEND" );
- front[sizeof(FRONTEND)] = '\0';
+ char front[] = FRONTEND;
+ int i_len;
+
+ i_len = sizeof(FRONTEND);
+ if (snprintf(front, sizeof(FRONTEND), FRONTEND, u_adapter, u_device) >= i_len)
+ {
+ msg_Err(p_input, "snprintf() truncated string for FRONTEND" );
+ front[sizeof(FRONTEND)] = '\0';
}
- msg_Dbg(p_input, "Opening frontend %s",front);
+ msg_Dbg(p_input, "Opening frontend %s",front);
if((frontend = open(front,O_RDWR)) < 0)
{
# ifdef HAVE_ERRNO_H
- msg_Err(p_input, "ioctl_FrontEndControl: Opening frontend failed (%s)",strerror(errno));
+ msg_Err(p_input, "ioctl_FrontEndControl: Opening frontend failed (%s)",strerror(errno));
# else
- msg_Err(p_input, "ioctl_FrontEndControl: Opening frontend failed");
+ msg_Err(p_input, "ioctl_FrontEndControl: Opening frontend failed");
# endif
return -1;
}
voltage = (pol) ? SEC_VOLTAGE_18 : SEC_VOLTAGE_13;
/* In case we have a DiSEqC, set it to the correct address */
- cmd.msg[0] =0x0; /* framing */
- cmd.msg[1] =0x10; /* address */
- cmd.msg[2] =0x38; /* command */
+ cmd.msg[0] = 0x0; /* framing */
+ cmd.msg[1] = 0x10; /* address */
+ cmd.msg[2] = 0x38; /* command */
/* command parameters start at index 3 */
cmd.msg[3] = 0xF0 | ((diseqc * 4) & 0x0F);
cmd.msg_len = 4;
{
int front;
int ret;
- char frontend[] = FRONTEND;
- int i_len;
-
- i_len = sizeof(FRONTEND);
- if (snprintf(frontend, sizeof(FRONTEND), FRONTEND, u_adapter, u_device) >= i_len)
- {
- msg_Err(p_input, "snprintf() truncated string for FRONTEND" );
- frontend[sizeof(FRONTEND)] = '\0';
+ char frontend[] = FRONTEND;
+ int i_len;
+
+ i_len = sizeof(FRONTEND);
+ if (snprintf(frontend, sizeof(FRONTEND), FRONTEND, u_adapter, u_device) >= i_len)
+ {
+ msg_Err(p_input, "snprintf() truncated string for FRONTEND" );
+ frontend[sizeof(FRONTEND)] = '\0';
}
- msg_Dbg(p_input, "Opening device %s", frontend);
+ msg_Dbg(p_input, "Opening device %s", frontend);
if((front = open(frontend,O_RDWR)) < 0)
{
# ifdef HAVE_ERRNO_H
- msg_Err(p_input, "ioctl_InfoFrontEnd: opening device failed (%s)", strerror(errno));
+ msg_Err(p_input, "ioctl_InfoFrontEnd: opening device failed (%s)", strerror(errno));
# else
- msg_Err(p_input, "ioctl_InfoFrontEnd: opening device failed");
+ msg_Err(p_input, "ioctl_InfoFrontEnd: opening device failed");
# endif
return -1;
}
/* Determine type of frontend */
if ((ret=ioctl(front, FE_GET_INFO, info)) < 0)
{
- close(front);
+ close(front);
# ifdef HAVE_ERRNO_H
msg_Err(p_input, "ioctl FE_GET_INFO failed (%d) %s", ret, strerror(errno));
# else
msg_Err(p_input, "ioctl FE_GET_INFO failed (%d)", ret);
# endif
- return -1;
+ return -1;
}
- msg_Dbg(p_input, "Frontend Info:\tname = %s\n\t\tfrequency_min = %d\n\t\tfrequency_max = %d\n\t\tfrequency_stepsize = %d\n\t\tfrequency_tolerance = %d\n\t\tsymbol_rate_min = %d\n\t\tsymbol_rate_max = %d\n\t\tsymbol_rate_tolerance (ppm) = %d\n\t\tnotifier_delay (ms)= %d\n",
- info->name,
- info->frequency_min,
- info->frequency_max,
- info->frequency_stepsize,
- info->frequency_tolerance,
- info->symbol_rate_min,
- info->symbol_rate_max,
- info->symbol_rate_tolerance,
- info->notifier_delay );
-
+ /* Print out frontend capabilities. */
+ msg_Dbg(p_input, "Frontend Info:\tname = %s\n\t\tfrequency_min = %d\n\t\tfrequency_max = %d\n\t\tfrequency_stepsize = %d\n\t\tfrequency_tolerance = %d\n\t\tsymbol_rate_min = %d\n\t\tsymbol_rate_max = %d\n\t\tsymbol_rate_tolerance (ppm) = %d\n\t\tnotifier_delay (ms)= %d\n",
+ info->name,
+ info->frequency_min,
+ info->frequency_max,
+ info->frequency_stepsize,
+ info->frequency_tolerance,
+ info->symbol_rate_min,
+ info->symbol_rate_max,
+ info->symbol_rate_tolerance,
+ info->notifier_delay );
+ msg_Dbg(p_input, "Frontend Info capability list:");
+ if (info->caps&FE_IS_STUPID)
+ msg_Dbg(p_input, "no capabilities - frontend is stupid!");
+ if (info->caps&FE_CAN_INVERSION_AUTO)
+ msg_Dbg(p_input, "inversion auto");
+ if (info->caps&FE_CAN_FEC_1_2)
+ msg_Dbg(p_input, "forward error correction 1/2");
+ if (info->caps&FE_CAN_FEC_2_3)
+ msg_Dbg(p_input, "forward error correction 2/3");
+ if (info->caps&FE_CAN_FEC_3_4)
+ msg_Dbg(p_input, "forward error correction 3/4");
+ if (info->caps&FE_CAN_FEC_4_5)
+ msg_Dbg(p_input, "forward error correction 4/5");
+ if (info->caps&FE_CAN_FEC_5_6)
+ msg_Dbg(p_input, "forward error correction 5/6");
+ if (info->caps&FE_CAN_FEC_6_7)
+ msg_Dbg(p_input, "forward error correction 6/7");
+ if (info->caps&FE_CAN_FEC_7_8)
+ msg_Dbg(p_input, "forward error correction 7/8");
+ if (info->caps&FE_CAN_FEC_8_9)
+ msg_Dbg(p_input, "forward error correction 8/9");
+ if (info->caps&FE_CAN_FEC_AUTO)
+ msg_Dbg(p_input, "forward error correction auto");
+ if (info->caps&FE_CAN_QPSK)
+ msg_Dbg(p_input, "card can do QPSK");
+ if (info->caps&FE_CAN_QAM_16)
+ msg_Dbg(p_input, "card can do QAM 16");
+ if (info->caps&FE_CAN_QAM_32)
+ msg_Dbg(p_input, "card can do QAM 32");
+ if (info->caps&FE_CAN_QAM_64)
+ msg_Dbg(p_input, "card can do QAM 64");
+ if (info->caps&FE_CAN_QAM_128)
+ msg_Dbg(p_input, "card can do QAM 128");
+ if (info->caps&FE_CAN_QAM_256)
+ msg_Dbg(p_input, "card can do QAM 256");
+ if (info->caps&FE_CAN_QAM_AUTO)
+ msg_Dbg(p_input, "card can do QAM auto");
+ if (info->caps&FE_CAN_TRANSMISSION_MODE_AUTO)
+ msg_Dbg(p_input, "transmission mode auto");
+ if (info->caps&FE_CAN_BANDWIDTH_AUTO)
+ msg_Dbg(p_input, "bandwidth mode auto");
+ if (info->caps&FE_CAN_GUARD_INTERVAL_AUTO)
+ msg_Dbg(p_input, "guard interval mode auto");
+ if (info->caps&FE_CAN_HIERARCHY_AUTO)
+ msg_Dbg(p_input, "hierarchy mode auto");
+ if (info->caps&FE_CAN_MUTE_TS)
+ msg_Dbg(p_input, "card can mute TS");
+ if (info->caps&FE_CAN_CLEAN_SETUP)
+ msg_Dbg(p_input, "clean setup");
+ msg_Dbg(p_input,"End of capability list");
+
close(front);
return 0;
}
int ioctl_DiseqcSendMsg (input_thread_t *p_input, int fd, fe_sec_voltage_t v, struct diseqc_cmd_t **cmd,
- fe_sec_tone_mode_t t, fe_sec_mini_cmd_t b)
+ fe_sec_tone_mode_t t, fe_sec_mini_cmd_t b)
{
int err;
- if ((err = ioctl(fd, FE_SET_TONE, SEC_TONE_OFF))<0)
- {
+ if ((err = ioctl(fd, FE_SET_TONE, SEC_TONE_OFF))<0)
+ {
# ifdef HAVE_ERRNO_H
- msg_Err(p_input, "ioclt FE_SET_TONE failed, tone=%s (%d) %s", SEC_TONE_ON ? "on" : "off", err, strerror(errno));
+ msg_Err(p_input, "ioclt FE_SET_TONE failed, tone=%s (%d) %s", SEC_TONE_ON ? "on" : "off", err, strerror(errno));
# else
- msg_Err(p_input, "ioclt FE_SET_TONE failed, tone=%s (%d)", SEC_TONE_ON ? "on" : "off", err);
+ msg_Err(p_input, "ioclt FE_SET_TONE failed, tone=%s (%d)", SEC_TONE_ON ? "on" : "off", err);
# endif
- return err;
+ return err;
}
- if ((err = ioctl(fd, FE_SET_VOLTAGE, v))<0)
- {
+ if ((err = ioctl(fd, FE_SET_VOLTAGE, v))<0)
+ {
# ifdef HAVE_ERRNO_H
- msg_Err(p_input, "ioclt FE_SET_VOLTAGE failed, voltage=%d (%d) %s", v, err, strerror(errno));
+ msg_Err(p_input, "ioclt FE_SET_VOLTAGE failed, voltage=%d (%d) %s", v, err, strerror(errno));
# else
- msg_Err(p_input, "ioclt FE_SET_VOLTAGE failed, voltage=%d (%d)", v, err);
+ msg_Err(p_input, "ioclt FE_SET_VOLTAGE failed, voltage=%d (%d)", v, err);
# endif
- return err;
+ return err;
}
- msleep(15);
- while (*cmd)
- {
- msg_Dbg(p_input, "msg: %02x %02x %02x %02x %02x %02x",
- (*cmd)->cmd.msg[0], (*cmd)->cmd.msg[1],
- (*cmd)->cmd.msg[2], (*cmd)->cmd.msg[3],
- (*cmd)->cmd.msg[4], (*cmd)->cmd.msg[5]);
+ msleep(15);
+ while (*cmd)
+ {
+ msg_Dbg(p_input, "DiseqcSendMsg(): %02x %02x %02x %02x %02x %02x",
+ (*cmd)->cmd.msg[0], (*cmd)->cmd.msg[1],
+ (*cmd)->cmd.msg[2], (*cmd)->cmd.msg[3],
+ (*cmd)->cmd.msg[4], (*cmd)->cmd.msg[5]);
- if ((err = ioctl(fd, FE_DISEQC_SEND_MASTER_CMD, &(*cmd)->cmd))<0)
- {
+ if ((err = ioctl(fd, FE_DISEQC_SEND_MASTER_CMD, &(*cmd)->cmd))<0)
+ {
# ifdef HAVE_ERRNO_H
- msg_Err(p_input, "ioclt FE_DISEQC_SEND_MASTER_CMD failed (%d) %s", err, strerror(errno));
+ msg_Err(p_input, "ioclt FE_DISEQC_SEND_MASTER_CMD failed (%d) %s", err, strerror(errno));
# else
- msg_Err(p_input, "ioclt FE_DISEQC_SEND_MASTER_CMD failed (%d)", err);
+ msg_Err(p_input, "ioclt FE_DISEQC_SEND_MASTER_CMD failed (%d)", err);
# endif
- return err;
+ return err;
}
- msleep((*cmd)->wait);
- cmd++;
- }
+ msleep((*cmd)->wait);
+ cmd++;
+ }
- msleep(15);
+ msleep(15);
- if ((err = ioctl(fd, FE_DISEQC_SEND_BURST, b))<0)
- {
+ if ((err = ioctl(fd, FE_DISEQC_SEND_BURST, b))<0)
+ {
# ifdef HAVE_ERRNO_H
- msg_Err(p_input, "ioctl FE_DISEQC_SEND_BURST failed, burst=%d (%d) %s",b, err, strerror(errno));
+ msg_Err(p_input, "ioctl FE_DISEQC_SEND_BURST failed, burst=%d (%d) %s",b, err, strerror(errno));
# else
- msg_Err(p_input, "ioctl FE_DISEQC_SEND_BURST failed, burst=%d (%d)",b, err);
+ msg_Err(p_input, "ioctl FE_DISEQC_SEND_BURST failed, burst=%d (%d)",b, err);
# endif
return err;
}
- msleep(15);
+ msleep(15);
if ((err = ioctl(fd, FE_SET_TONE, t))<0)
{
# ifdef HAVE_ERRNO_H
- msg_Err(p_input, "ioctl FE_SET_TONE failed, tone=%d (%d) %s", t, err, strerror(errno));
+ msg_Err(p_input, "ioctl FE_SET_TONE failed, tone=%d (%d) %s", t, err, strerror(errno));
# else
- msg_Err(p_input, "ioctl FE_SET_TONE failed, tone=%d (%d)", t, err);
+ msg_Err(p_input, "ioctl FE_SET_TONE failed, tone=%d (%d)", t, err);
# endif
- return err;
- }
- return err;
+ return err;
+ }
+ return err;
}
-int ioctl_SetupSwitch (input_thread_t *p_input, int frontend_fd, int switch_pos, int voltage_18, int hiband)
+int ioctl_SetupSwitch (input_thread_t *p_input, int frontend_fd, int switch_pos,
+ int voltage_18, int hiband)
{
int ret;
- struct diseqc_cmd_t *cmd[2] = { NULL, NULL };
- int i = 4 * switch_pos + 2 * hiband + (voltage_18 ? 1 : 0);
+ struct diseqc_cmd_t *cmd[2] = { NULL, NULL };
+ int i = 4 * switch_pos + 2 * hiband + (voltage_18 ? 1 : 0);
- msg_Dbg(p_input, "ioctl_SetupSwitch: switch pos %i, %sV, %sband",
- switch_pos, voltage_18 ? "18" : "13", hiband ? "hi" : "lo");
- msg_Dbg(p_input, "ioctl_SetupSwitch: index %i", i);
+ msg_Dbg(p_input, "ioctl_SetupSwitch: switch pos %i, %sV, %sband",
+ switch_pos, voltage_18 ? "18" : "13", hiband ? "hi" : "lo");
+ msg_Dbg(p_input, "ioctl_SetupSwitch: index %i", i);
- if ((i < 0) || (i >= (int)(sizeof(switch_cmds)/sizeof(struct diseqc_cmd_t))))
+ if ((i < 0) || (i >= (int)(sizeof(switch_cmds)/sizeof(struct diseqc_cmd_t))))
return -EINVAL;
- cmd[0] = &switch_cmds[i];
+ cmd[0] = &switch_cmds[i];
- if ((ret = ioctl_DiseqcSendMsg (p_input, frontend_fd,
- (i % 2) ? SEC_VOLTAGE_18 : SEC_VOLTAGE_13,
- cmd,
- (i/2) % 2 ? SEC_TONE_ON : SEC_TONE_OFF,
- (i/4) % 2 ? SEC_MINI_B : SEC_MINI_A))<0)
- {
- msg_Err(p_input, "ioctl_DiseqcSendMsg() failed (%d)", ret);
- return ret;
- }
+ if ((ret = ioctl_DiseqcSendMsg (p_input, frontend_fd,
+ (i % 2) ? SEC_VOLTAGE_18 : SEC_VOLTAGE_13,
+ cmd,
+ (i/2) % 2 ? SEC_TONE_ON : SEC_TONE_OFF,
+ (i/4) % 2 ? SEC_MINI_B : SEC_MINI_A))<0)
+ {
+ msg_Err(p_input, "ioctl_DiseqcSendMsg() failed (%d)", ret);
+ return ret;
+ }
- return ret;
+ return ret;
}
#define SWITCHFREQ 11700000
#define LOF_LO 9750000
/*****************************************************************************
- * ioctl_SetQPSKFrontend : controls the FE device
+ * ioctl_SetFrontend : controls the FE device
*****************************************************************************/
-int ioctl_SetQPSKFrontend (input_thread_t * p_input, struct dvb_frontend_parameters fep,
- int b_polarisation, unsigned int u_adapter, unsigned int u_device )
+int ioctl_SetFrontend (input_thread_t * p_input, struct dvb_frontend_parameters fep,
+ int b_polarisation, unsigned int u_adapter, unsigned int u_device )
{
int front;
int ret;
int i;
int hiband;
- char frontend[] = FRONTEND;
- int i_len;
-
- i_len = sizeof(FRONTEND);
- if (snprintf(frontend, sizeof(FRONTEND), FRONTEND, u_adapter, u_device) >= i_len)
- {
- msg_Err(p_input, "error: snprintf() truncated string for FRONTEND" );
- frontend[sizeof(FRONTEND)] = '\0';
+ char frontend[] = FRONTEND;
+ int i_len;
+
+ i_len = sizeof(FRONTEND);
+ if (snprintf(frontend, sizeof(FRONTEND), FRONTEND, u_adapter, u_device) >= i_len)
+ {
+ msg_Err(p_input, "ioctl_SetFrontEnd snprintf() truncated string for FRONTEND" );
+ frontend[sizeof(FRONTEND)] = '\0';
}
/* Open the frontend device */
hiband = (fep.frequency >= SWITCHFREQ);
if ((ret=ioctl_SetupSwitch (p_input, front, 0, b_polarisation, hiband))<0)
{
- msg_Err(p_input, "ioctl_SetupSwitch failed (%d)", ret);
- return -1;
- }
+ msg_Err(p_input, "ioctl_SetupSwitch failed (%d)", ret);
+ return -1;
+ }
if (hiband)
- fep.frequency -= LOF_HI;
+ fep.frequency -= LOF_HI;
else
- fep.frequency -= LOF_LO;
+ fep.frequency -= LOF_LO;
/* Now send it all to the frontend device */
if ((ret=ioctl(front, FE_SET_FRONTEND, &fep)) < 0)
{
- close(front);
+ close(front);
# ifdef HAVE_ERRNO_H
- msg_Err(p_input, "ioctl_SetQPSKFrontend: ioctl FE_SET_FRONTEND failed (%d) %s", ret, strerror(errno));
+ msg_Err(p_input, "ioctl_SetFrontend: ioctl FE_SET_FRONTEND failed (%d) %s", ret, strerror(errno));
# else
- msg_Err(p_input, "ioctl_SetQPSKFrontend: ioctl FE_SET_FRONTEND failed (%d)", ret);
+ msg_Err(p_input, "ioctl_SetFrontend: ioctl FE_SET_FRONTEND failed (%d)", ret);
# endif
return -1;
}
msg_Err(p_input, "ioctl FE_READ_STATUS failed (%d) %s", ret, strerror(errno));
# else
msg_Err(p_input, "ioctl FE_READ_STATUS failed (%d)", ret);
-# endif
- }
+# endif
+ }
if (s & FE_HAS_LOCK)
{
- msg_Dbg(p_input, "ioctl_SetQPSKFrontend: tuning status == 0x%02x!!! ..."
+ msg_Dbg(p_input, "ioctl_SetFrontend: tuning status == 0x%02x!!! ..."
"tuning succeeded", s);
- ret = 0;
+ ret = 0;
}
else
{
- msg_Dbg(p_input, "ioctl_SetQPSKFrontend: tuning status == 0x%02x!!! ..."
+ msg_Dbg(p_input, "ioctl_SetFrontend: tuning status == 0x%02x!!! ..."
"tuning failed", s);
- ret = -1;
- }
+ ret = -1;
+ }
usleep( 500000 );
}
/******************************************************************
* Check completion of the frontend control sequence
******************************************************************/
-static int ioctl_CheckQPSK(input_thread_t * p_input, int front)
+static int ioctl_CheckFrontend(input_thread_t * p_input, int front)
{
int ret;
struct pollfd pfd[1];
struct dvb_frontend_event event;
- /* poll for QPSK event to check if tuning worked */
+ /* poll for frontend event to check if tuning worked */
pfd[0].fd = front;
pfd[0].events = POLLIN;
if ( (ret=ioctl(front, FE_GET_EVENT, &event)) < 0)
{
# ifdef HAVE_ERRNO_H
- msg_Err(p_input, "ioctl_CheckQPSK: ioctl FE_GET_EVENT failed (%d) %s", ret, strerror(errno));
+ msg_Err(p_input, "ioctl_CheckFrontend: ioctl FE_GET_EVENT failed (%d) %s", ret, strerror(errno));
# else
- msg_Err(p_input, "ioctl_CheckQPSK: ioctl FE_GET_EVENT failed (%d)", ret);
+ msg_Err(p_input, "ioctl_CheckFrontend: ioctl FE_GET_EVENT failed (%d)", ret);
# endif
return -5;
}
switch(event.status)
{
- case FE_HAS_SIGNAL: /* found something above the noise level */
- msg_Dbg(p_input, "ioctl_CheckQPSK: FE_HAS_SIGNAL");
- break;
- case FE_HAS_CARRIER: /* found a DVB signal */
- msg_Dbg(p_input, "ioctl_CheckQPSK: FE_HAS_CARRIER");
- break;
- case FE_HAS_VITERBI: /* FEC is stable */
- msg_Dbg(p_input, "ioctl_CheckQPSK: FE_HAS_VITERBI");
- break;
- case FE_HAS_SYNC: /* found sync bytes */
- msg_Dbg(p_input, "ioctl_CheckQPSK: FE_HAS_SYNC");
- break;
- case FE_HAS_LOCK: /* everything's working... */
- msg_Dbg(p_input, "ioctl_CheckQPSK: FE_HAS_LOCK");
- break;
- case FE_TIMEDOUT: /* no lock within the last ~2 seconds */
- msg_Dbg(p_input, "ioctl_CheckQPSK: FE_TIMEDOUT");
- return -2;
- case FE_REINIT: /* frontend was reinitialized, */
- /* application is recommned to reset */
- /* DiSEqC, tone and parameters */
- msg_Dbg(p_input, "ioctl_CheckQPSK: FE_REINIT");
- return -1;
+ case FE_HAS_SIGNAL: /* found something above the noise level */
+ msg_Dbg(p_input, "ioctl_CheckFrontend: FE_HAS_SIGNAL");
+ break;
+ case FE_HAS_CARRIER: /* found a DVB signal */
+ msg_Dbg(p_input, "ioctl_CheckFrontend: FE_HAS_CARRIER");
+ break;
+ case FE_HAS_VITERBI: /* FEC is stable */
+ msg_Dbg(p_input, "ioctl_CheckFrontend: FE_HAS_VITERBI");
+ break;
+ case FE_HAS_SYNC: /* found sync bytes */
+ msg_Dbg(p_input, "ioctl_CheckFrontend: FE_HAS_SYNC");
+ break;
+ case FE_HAS_LOCK: /* everything's working... */
+ msg_Dbg(p_input, "ioctl_CheckFrontend: FE_HAS_LOCK");
+ break;
+ case FE_TIMEDOUT: /* no lock within the last ~2 seconds */
+ msg_Dbg(p_input, "ioctl_CheckFrontend: FE_TIMEDOUT");
+ return -2;
+ case FE_REINIT: /* frontend was reinitialized, */
+ /* application is recommned to reset */
+ /* DiSEqC, tone and parameters */
+ msg_Dbg(p_input, "ioctl_CheckFrontend: FE_REINIT");
+ return -1;
}
}
else
{
/* should come here */
- msg_Err(p_input, "ioctl_CheckQPSK: event() failed");
+ msg_Err(p_input, "ioctl_CheckFrontend: event() failed");
return -3;
}
}
else
{
# ifdef HAVE_ERRNO_H
- msg_Err(p_input, "ioctl_CheckQPSK: poll() failed (%s)", strerror(errno));
+ msg_Err(p_input, "ioctl_CheckFrontend: poll() failed (%s)", strerror(errno));
# else
- msg_Err(p_input, "ioctl_CheckQPSK: poll() failed");
+ msg_Err(p_input, "ioctl_CheckFrontend: poll() failed");
# endif
return -4;
}
{
struct dmx_pes_filter_params s_filter_params;
char dmx[] = DMX;
- int i_len;
- int result;
+ int i_len;
+ int result;
/* We first open the device */
- i_len = sizeof(DMX);
- if (snprintf( dmx, sizeof(DMX), DMX, u_adapter, u_device) >= i_len)
- {
- msg_Err(p_input, "snprintf() truncated string for DMX" );
- dmx[sizeof(DMX)] = '\0';
+ i_len = sizeof(DMX);
+ if (snprintf( dmx, sizeof(DMX), DMX, u_adapter, u_device) >= i_len)
+ {
+ msg_Err(p_input, "snprintf() truncated string for DMX" );
+ dmx[sizeof(DMX)] = '\0';
}
msg_Dbg(p_input, "Opening demux device %s", dmx);
if ((*pi_fd = open(dmx, O_RDWR|O_NONBLOCK)) < 0)
{
# ifdef HAVE_ERRNO_H
- msg_Err(p_input, "ioctl_SetDMXFIlter: opening device failed (%s)", strerror(errno));
+ msg_Err(p_input, "ioctl_SetDMXFilter: opening device failed (%s)", strerror(errno));
# else
- msg_Err(p_input, "ioctl_SetDMXFIlter: opening device failed");
+ msg_Err(p_input, "ioctl_SetDMXFilter: opening device failed");
# endif
return -1;
}
switch ( i_type )
{
case 1:
- msg_Dbg(p_input, "ioctl_SetDMXFIlter: DMX_PES_VIDEO for PMT %d", i_pid);
+ msg_Dbg(p_input, "ioctl_SetDMXFilter: DMX_PES_VIDEO for PMT %d", i_pid);
s_filter_params.pes_type = DMX_PES_VIDEO;
break;
case 2:
- msg_Dbg(p_input, "ioctl_SetDMXFIlter: DMX_PES_AUDIO for PMT %d", i_pid);
+ msg_Dbg(p_input, "ioctl_SetDMXFilter: DMX_PES_AUDIO for PMT %d", i_pid);
s_filter_params.pes_type = DMX_PES_AUDIO;
break;
case 3:
- msg_Dbg(p_input, "ioctl_SetDMXFIlter: DMX_PES_OTHER for PMT %d", i_pid);
+ msg_Dbg(p_input, "ioctl_SetDMXFilter: DMX_PES_OTHER for PMT %d", i_pid);
s_filter_params.pes_type = DMX_PES_OTHER;
break;
+ case 4:
+ msg_Dbg(p_input, "ioctl_SetDMXFilter: DMX_PES_VIDEO1 for PMT %d", i_pid);
+ s_filter_params.pes_type = DMX_PES_VIDEO1;
+ break;
+ case 5:
+ msg_Dbg(p_input, "ioctl_SetDMXFilter: DMX_PES_AUDIO1 for PMT %d", i_pid);
+ s_filter_params.pes_type = DMX_PES_AUDIO1;
+ break;
+
+ case 7:
+ msg_Dbg(p_input, "ioctl_SetDMXFilter: DMX_PES_VIDEO2 for PMT %d", i_pid);
+ s_filter_params.pes_type = DMX_PES_VIDEO2;
+ break;
+ case 8:
+ msg_Dbg(p_input, "ioctl_SetDMXFilter: DMX_PES_AUDIO2 for PMT %d", i_pid);
+ s_filter_params.pes_type = DMX_PES_AUDIO2;
+ break;
+
+ case 10:
+ msg_Dbg(p_input, "ioctl_SetDMXFilter: DMX_PES_VIDEO3 for PMT %d", i_pid);
+ s_filter_params.pes_type = DMX_PES_VIDEO3;
+ break;
+ case 11:
+ msg_Dbg(p_input, "ioctl_SetDMXFilter: DMX_PES_AUDIO3 for PMT %d", i_pid);
+ s_filter_params.pes_type = DMX_PES_AUDIO3;
+ break;
default:
msg_Err(p_input, "trying to set PMT id to=%d for unknown type %d", i_pid, i_type );
break;
if ((result = ioctl(*pi_fd, DMX_SET_PES_FILTER, &s_filter_params)) < 0)
{
# ifdef HAVE_ERRNO_H
- msg_Err(p_input, "ioctl_SetDMXFIlter: ioctl failed with %d (%s)",result, strerror(errno));
+ msg_Err(p_input, "ioctl_SetDMXFilter: ioctl failed with %d (%s)",result, strerror(errno));
# else
- msg_Err(p_input, "ioctl_SetDMXFIlter: ioctl failed with %d",result);
+ msg_Err(p_input, "ioctl_SetDMXFilter: ioctl failed with %d",result);
# endif
return -1;
}
# else
msg_Err(p_input, "ioctl DMX_STOP failed for demux %d (%d)", demux, ret);
# endif
- return -1;
+ return -1;
}
close(demux);
return 0;
}
+
+/*****************************************************************************
+ * dvb_DecodeBandwidth : decodes arguments for DVB S/C/T card
+ *****************************************************************************/
+fe_bandwidth_t dvb_DecodeBandwidth(input_thread_t * p_input, int bandwidth)
+{
+ fe_bandwidth_t fe_bandwidth = 0;
+
+ switch (bandwidth)
+ {
+ case 0:
+ fe_bandwidth = BANDWIDTH_AUTO;
+ break;
+ case 6:
+ fe_bandwidth = BANDWIDTH_6_MHZ;
+ break;
+ case 7:
+ fe_bandwidth = BANDWIDTH_7_MHZ;
+ break;
+ case 8:
+ fe_bandwidth = BANDWIDTH_8_MHZ;
+ break;
+ default:
+ msg_Dbg( p_input, "terrestrial dvb has bandwidth not set, using auto");
+ fe_bandwidth = BANDWIDTH_AUTO;
+ break;
+ }
+
+ return fe_bandwidth;
+}
+
+fe_code_rate_t dvb_DecodeFEC(input_thread_t * p_input, int fec)
+{
+ fe_code_rate_t fe_fec = FEC_NONE;
+
+ switch( fec )
+ {
+ case 1:
+ fe_fec = FEC_1_2;
+ break;
+ case 2:
+ fe_fec = FEC_2_3;
+ break;
+ case 3:
+ fe_fec = FEC_3_4;
+ break;
+ case 4:
+ fe_fec = FEC_4_5;
+ break;
+ case 5:
+ fe_fec = FEC_5_6;
+ break;
+ case 6:
+ fe_fec = FEC_6_7;
+ break;
+ case 7:
+ fe_fec = FEC_7_8;
+ break;
+ case 8:
+ fe_fec = FEC_8_9;
+ break;
+ case 9:
+ fe_fec = FEC_AUTO;
+ break;
+ default:
+ /* cannot happen */
+ fe_fec = FEC_NONE;
+ msg_Err( p_input, "argument has invalid FEC (%d)", fec);
+ break;
+ }
+ return fe_fec;
+}
+
+fe_modulation_t dvb_DecodeModulation(input_thread_t * p_input, int modulation)
+{
+ fe_modulation_t fe_modulation = 0;
+
+ switch( modulation )
+ {
+ case -1:
+ fe_modulation = QPSK;
+ break;
+ case 0:
+ fe_modulation = QAM_AUTO;
+ break;
+ case 16:
+ fe_modulation = QAM_16;
+ break;
+ case 32:
+ fe_modulation = QAM_32;
+ break;
+ case 64:
+ fe_modulation = QAM_64;
+ break;
+ case 128:
+ fe_modulation = QAM_128;
+ break;
+ case 256:
+ fe_modulation = QAM_256;
+ break;
+ default:
+ msg_Dbg( p_input, "terrestrial/cable dvb has constellation/modulation not set, using auto");
+ fe_modulation = QAM_AUTO;
+ break;
+ }
+ return fe_modulation;
+}
+
+fe_transmit_mode_t dvb_DecodeTransmission(input_thread_t * p_input, int transmission)
+{
+ fe_transmit_mode_t fe_transmission = 0;
+
+ switch( transmission )
+ {
+ case 0:
+ fe_transmission = TRANSMISSION_MODE_AUTO;
+ break;
+ case 2:
+ fe_transmission = TRANSMISSION_MODE_2K;
+ break;
+ case 8:
+ fe_transmission = TRANSMISSION_MODE_8K;
+ break;
+ default:
+ msg_Dbg( p_input, "terrestrial dvb has transmission mode not set, using auto");
+ fe_transmission = TRANSMISSION_MODE_AUTO;
+ break;
+ }
+ return fe_transmission;
+}
+
+fe_guard_interval_t dvb_DecodeGuardInterval(input_thread_t * p_input, int guard)
+{
+ fe_guard_interval_t fe_guard = 0;
+
+ switch( guard )
+ {
+ case 0:
+ fe_guard = GUARD_INTERVAL_AUTO;
+ break;
+ case 4:
+ fe_guard = GUARD_INTERVAL_1_4;
+ break;
+ case 8:
+ fe_guard = GUARD_INTERVAL_1_8;
+ break;
+ case 16:
+ fe_guard = GUARD_INTERVAL_1_16;
+ break;
+ case 32:
+ fe_guard = GUARD_INTERVAL_1_32;
+ break;
+ default:
+ msg_Dbg( p_input, "terrestrial dvb has guard interval not set, using auto");
+ fe_guard = GUARD_INTERVAL_AUTO;
+ break;
+ }
+ return fe_guard;
+}
+
+fe_hierarchy_t dvb_DecodeHierarchy(input_thread_t * p_input, int hierarchy)
+{
+ fe_hierarchy_t fe_hierarchy = 0;
+
+ switch (hierarchy)
+ {
+ case -1:
+ fe_hierarchy = HIERARCHY_NONE;
+ break;
+ case 0:
+ fe_hierarchy = HIERARCHY_AUTO;
+ break;
+ case 1:
+ fe_hierarchy = HIERARCHY_1;
+ break;
+ case 2:
+ fe_hierarchy = HIERARCHY_2;
+ break;
+ case 4:
+ fe_hierarchy = HIERARCHY_4;
+ break;
+ default:
+ msg_Dbg( p_input, "terrestrial dvb has hierarchy not set, using auto");
+ fe_hierarchy = HIERARCHY_AUTO;
+ break;
+ }
+ return fe_hierarchy;
+}
+
+fe_spectral_inversion_t dvb_DecodeInversion(input_thread_t * p_input, int inversion)
+{
+ fe_spectral_inversion_t fe_inversion=0;
+
+ switch (inversion)
+ {
+ case 0:
+ fe_inversion = INVERSION_OFF;
+ break;
+ case 1:
+ fe_inversion = INVERSION_ON;
+ break;
+ case 2:
+ fe_inversion = INVERSION_AUTO;
+ break;
+ default:
+ msg_Dbg( p_input, "dvb has inversion/polarisation not set, using auto");
+ fe_inversion = INVERSION_AUTO;
+ break;
+ }
+ return fe_inversion;
+}
projects / vlc / blobdiff