--- /dev/null
+diff -ruNa fribidi.old/Makefile.in fribidi/Makefile.in
+--- fribidi.old/Makefile.in Sun May 19 12:17:19 2002
++++ fribidi/Makefile.in Sun Nov 2 00:51:37 2003
+@@ -1,6 +1,8 @@
+-# Makefile.in generated automatically by automake 1.4 from Makefile.am
++# Makefile.in generated by automake 1.6.1 from Makefile.am.
++# @configure_input@
+
+-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
++# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
++# Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -10,7 +12,7 @@
+ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+ # PARTICULAR PURPOSE.
+
+-
++@SET_MAKE@
+ SHELL = @SHELL@
+
+ srcdir = @srcdir@
+@@ -31,13 +33,9 @@
+ mandir = @mandir@
+ includedir = @includedir@
+ oldincludedir = /usr/include
+-
+-DESTDIR =
+-
+ pkgdatadir = $(datadir)/@PACKAGE@
+ pkglibdir = $(libdir)/@PACKAGE@
+ pkgincludedir = $(includedir)/@PACKAGE@
+-
+ top_builddir = .
+
+ ACLOCAL = @ACLOCAL@
+@@ -45,12 +43,15 @@
+ AUTOMAKE = @AUTOMAKE@
+ AUTOHEADER = @AUTOHEADER@
+
++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+ INSTALL = @INSTALL@
+-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
++INSTALL_PROGRAM = @INSTALL_PROGRAM@
+ INSTALL_DATA = @INSTALL_DATA@
++install_sh_DATA = $(install_sh) -c -m 644
++install_sh_PROGRAM = $(install_sh) -c
+ INSTALL_SCRIPT = @INSTALL_SCRIPT@
++INSTALL_HEADER = $(INSTALL_DATA)
+ transform = @program_transform_name@
+-
+ NORMAL_INSTALL = :
+ PRE_INSTALL = :
+ POST_INSTALL = :
+@@ -59,13 +60,18 @@
+ POST_UNINSTALL = :
+ host_alias = @host_alias@
+ host_triplet = @host@
++
++EXEEXT = @EXEEXT@
++OBJEXT = @OBJEXT@
++PATH_SEPARATOR = @PATH_SEPARATOR@
++AMTAR = @AMTAR@
+ AS = @AS@
+ AWK = @AWK@
+ CC = @CC@
+ CPP = @CPP@
++DEPDIR = @DEPDIR@
+ DLLTOOL = @DLLTOOL@
+ ECHO = @ECHO@
+-EXEEXT = @EXEEXT@
+ FRIBIDI_BINARY_AGE = @FRIBIDI_BINARY_AGE@
+ FRIBIDI_INTERFACE_AGE = @FRIBIDI_INTERFACE_AGE@
+ FRIBIDI_INTERFACE_VERSION = @FRIBIDI_INTERFACE_VERSION@
+@@ -75,67 +81,136 @@
+ FRIBIDI_NO_CHARSETS = @FRIBIDI_NO_CHARSETS@
+ FRIBIDI_RPM_RELEASE = @FRIBIDI_RPM_RELEASE@
+ FRIBIDI_VERSION = @FRIBIDI_VERSION@
++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+ LIBTOOL = @LIBTOOL@
+ LN_S = @LN_S@
+-MAKEINFO = @MAKEINFO@
+ OBJDUMP = @OBJDUMP@
+-OBJEXT = @OBJEXT@
+ PACKAGE = @PACKAGE@
+ RANLIB = @RANLIB@
+ SED = @SED@
+ STRIP = @STRIP@
+ VERSION = @VERSION@
++am__include = @am__include@
++am__quote = @am__quote@
++install_sh = @install_sh@
+
+ AUTOMAKE_OPTIONS = gnu
+
+-noinst_PROGRAMS = fribidi_benchmark fribidi_create_char_types fribidi_create_mirroring
+-
+-
+-libfribidi_charsets = fribidi_char_sets.c fribidi_char_sets_utf8.c
+-
+-
+-libfribidi_charsets_extra = fribidi_char_sets_cap_rtl.c fribidi_char_sets_iso8859_6.c fribidi_char_sets_iso8859_8.c fribidi_char_sets_cp1255.c fribidi_char_sets_cp1256.c fribidi_char_sets_isiri_3342.c
+-
+-
+-libfribidi_charsets_h = fribidi_char_sets.h fribidi_char_sets_utf8.h
+-
+-libfribidi_charsets_extra_h = fribidi_char_sets_cap_rtl.h fribidi_char_sets_cp1255.h fribidi_char_sets_cp1256.h fribidi_char_sets_isiri_3342.h fribidi_char_sets_iso8859_6.h fribidi_char_sets_iso8859_8.h
++noinst_PROGRAMS = fribidi_benchmark \
++ fribidi_create_char_types \
++ fribidi_create_mirroring
++
++
++libfribidi_charsets = \
++ fribidi_char_sets.c \
++ fribidi_char_sets_utf8.c
++
++
++libfribidi_charsets_extra = \
++ fribidi_char_sets_cap_rtl.c \
++ fribidi_char_sets_iso8859_6.c \
++ fribidi_char_sets_iso8859_8.c \
++ fribidi_char_sets_cp1255.c \
++ fribidi_char_sets_cp1256.c \
++ fribidi_char_sets_isiri_3342.c
++
++
++libfribidi_charsets_h = \
++ fribidi_char_sets.h \
++ fribidi_char_sets_utf8.h
++
++libfribidi_charsets_extra_h = \
++ fribidi_char_sets_cap_rtl.h \
++ fribidi_char_sets_cp1255.h \
++ fribidi_char_sets_cp1256.h \
++ fribidi_char_sets_isiri_3342.h \
++ fribidi_char_sets_iso8859_6.h \
++ fribidi_char_sets_iso8859_8.h
+
+
+ lib_LTLIBRARIES = libfribidi.la
+
+-libfribidi_la_SOURCES = fribidi.c fribidi_types.c fribidi_mem.c fribidi_mirroring.c fribidi_char_type.c fribidi_wcwidth.c fribidi_utils.c $(libfribidi_charsets) $(libfribidi_charsets_extra)
++libfribidi_la_SOURCES = \
++ fribidi.c \
++ fribidi_types.c \
++ fribidi_mem.c \
++ fribidi_mirroring.c \
++ fribidi_char_type.c \
++ fribidi_wcwidth.c \
++ fribidi_utils.c \
++ $(libfribidi_charsets) \
++ $(libfribidi_charsets_extra)
+
+
+ libfribidi_la_LIBADD =
+
+ libfribidiincdir = $(includedir)/fribidi
+
+-libfribidiinc_HEADERS = fribidi.h fribidi_types.h fribidi_mem.h fribidi_unicode.h $(libfribidi_charsets_h) $(libfribidi_charsets_extra_h) fribidi_config.h
++libfribidiinc_HEADERS = \
++ fribidi.h \
++ fribidi_types.h \
++ fribidi_mem.h \
++ fribidi_unicode.h \
++ $(libfribidi_charsets_h) \
++ $(libfribidi_charsets_extra_h) \
++ fribidi_config.h
+
+
+-GETOPT_SRC = getopt.c getopt1.c
++GETOPT_SRC = \
++ getopt.c \
++ getopt1.c
+
+
+-GETOPT_HDR = getopt.h
++GETOPT_HDR = \
++ getopt.h
+
+
+-TEST_FILES = tests/test_CapRTL_explicit.input tests/test_CapRTL_explicit.reference tests/test_CapRTL_implicit.input tests/test_CapRTL_implicit.reference tests/test_ISO8859-8_hebrew.input tests/test_ISO8859-8_hebrew.reference tests/test_UTF-8_persian.input tests/test_UTF-8_persian.reference
++TEST_FILES = \
++ tests/test_CapRTL_explicit.input \
++ tests/test_CapRTL_explicit.reference \
++ tests/test_CapRTL_implicit.input \
++ tests/test_CapRTL_implicit.reference \
++ tests/test_ISO8859-8_hebrew.input \
++ tests/test_ISO8859-8_hebrew.reference \
++ tests/test_UTF-8_persian.input \
++ tests/test_UTF-8_persian.reference
+
+
+-TABLE_FILES = fribidi_tab_mirroring.i fribidi_tab_char_type_2.i fribidi_tab_char_type_9.i
++TABLE_FILES = \
++ fribidi_tab_mirroring.i \
++ fribidi_tab_char_type_2.i \
++ fribidi_tab_char_type_9.i
+
+
+-UNIDATA_FILES = unidata/README unidata/UnicodeData.txt unidata/BidiMirroring.txt
++UNIDATA_FILES = \
++ unidata/README \
++ unidata/UnicodeData.txt \
++ unidata/BidiMirroring.txt
+
+
+-OTHER_FILES = fribidi_wcwidth.i
++OTHER_FILES = \
++ fribidi_wcwidth.i
+
+
+-EXTRA_HEADERS = packtab.h $(GETOPT_HDR)
++EXTRA_HEADERS = \
++ packtab.h \
++ $(GETOPT_HDR)
+
+
+-EXTRA_DIST = bootstrap run.tests ANNOUNCE acinclude.m4 fribidi_config.h.in fribidi.pc.in fribidi.spec.in fribidi.spec $(TEST_FILES) $(TABLE_FILES) $(UNIDATA_FILES) $(OTHER_FILES) $(EXTRA_HEADERS)
++EXTRA_DIST = \
++ bootstrap \
++ run.tests \
++ ANNOUNCE \
++ acinclude.m4 \
++ fribidi_config.h.in \
++ fribidi.pc.in \
++ fribidi.spec.in \
++ fribidi.spec \
++ $(TEST_FILES) \
++ $(TABLE_FILES) \
++ $(UNIDATA_FILES) \
++ $(OTHER_FILES) \
++ $(EXTRA_HEADERS)
+
+
+ fribidi_benchmark_SOURCES = fribidi_benchmark.c $(GETOPT_SRC)
+@@ -161,620 +236,607 @@
+ DISTCLEANFILES = fribidi_tab_char_type_stamp
+
+ MAINTAINERCLEANFILES = Makefile.in configure aclocal.m4 config.h.in
++subdir = .
+ ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+ mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+ CONFIG_HEADER = config.h
+-CONFIG_CLEAN_FILES = fribidi_config.h fribidi-config fribidi.pc \
+-fribidi.spec
+-LTLIBRARIES = $(lib_LTLIBRARIES)
++CONFIG_CLEAN_FILES = fribidi_config.h fribidi-config fribidi.pc \
++ fribidi.spec
++LTLIBRARIES = $(lib_LTLIBRARIES)
++
++libfribidi_la_LDFLAGS =
++libfribidi_la_DEPENDENCIES =
++am__objects_1 = fribidi_char_sets.lo fribidi_char_sets_utf8.lo
++am__objects_2 = fribidi_char_sets_cap_rtl.lo \
++ fribidi_char_sets_iso8859_6.lo fribidi_char_sets_iso8859_8.lo \
++ fribidi_char_sets_cp1255.lo fribidi_char_sets_cp1256.lo \
++ fribidi_char_sets_isiri_3342.lo
++am_libfribidi_la_OBJECTS = fribidi.lo fribidi_types.lo fribidi_mem.lo \
++ fribidi_mirroring.lo fribidi_char_type.lo fribidi_wcwidth.lo \
++ fribidi_utils.lo $(am__objects_1) $(am__objects_2)
++libfribidi_la_OBJECTS = $(am_libfribidi_la_OBJECTS)
++bin_PROGRAMS = fribidi$(EXEEXT)
++noinst_PROGRAMS = fribidi_benchmark$(EXEEXT) \
++ fribidi_create_char_types$(EXEEXT) \
++ fribidi_create_mirroring$(EXEEXT)
++PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
++
++am__objects_3 = getopt.$(OBJEXT) getopt1.$(OBJEXT)
++am_fribidi_OBJECTS = fribidi_main.$(OBJEXT) $(am__objects_3)
++fribidi_OBJECTS = $(am_fribidi_OBJECTS)
++fribidi_DEPENDENCIES = libfribidi.la
++fribidi_LDFLAGS =
++am_fribidi_benchmark_OBJECTS = fribidi_benchmark.$(OBJEXT) \
++ $(am__objects_3)
++fribidi_benchmark_OBJECTS = $(am_fribidi_benchmark_OBJECTS)
++fribidi_benchmark_DEPENDENCIES = libfribidi.la
++fribidi_benchmark_LDFLAGS =
++am_fribidi_create_char_types_OBJECTS = \
++ fribidi_create_char_types.$(OBJEXT) packtab.$(OBJEXT)
++fribidi_create_char_types_OBJECTS = \
++ $(am_fribidi_create_char_types_OBJECTS)
++fribidi_create_char_types_LDADD = $(LDADD)
++fribidi_create_char_types_DEPENDENCIES =
++fribidi_create_char_types_LDFLAGS =
++am_fribidi_create_mirroring_OBJECTS = fribidi_create_mirroring.$(OBJEXT)
++fribidi_create_mirroring_OBJECTS = \
++ $(am_fribidi_create_mirroring_OBJECTS)
++fribidi_create_mirroring_LDADD = $(LDADD)
++fribidi_create_mirroring_DEPENDENCIES =
++fribidi_create_mirroring_LDFLAGS =
++SCRIPTS = $(bin_SCRIPTS)
+
+
+-DEFS = @DEFS@ -I. -I$(srcdir) -I.
++DEFS = @DEFS@
++DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
+ CPPFLAGS = @CPPFLAGS@
+ LDFLAGS = @LDFLAGS@
+ LIBS = @LIBS@
+-libfribidi_la_LDFLAGS =
+-libfribidi_la_DEPENDENCIES =
+-libfribidi_la_OBJECTS = fribidi.lo fribidi_types.lo fribidi_mem.lo \
+-fribidi_mirroring.lo fribidi_char_type.lo fribidi_wcwidth.lo \
+-fribidi_utils.lo fribidi_char_sets.lo fribidi_char_sets_utf8.lo \
+-fribidi_char_sets_cap_rtl.lo fribidi_char_sets_iso8859_6.lo \
+-fribidi_char_sets_iso8859_8.lo fribidi_char_sets_cp1255.lo \
+-fribidi_char_sets_cp1256.lo fribidi_char_sets_isiri_3342.lo
+-bin_PROGRAMS = fribidi$(EXEEXT)
+-noinst_PROGRAMS = fribidi_benchmark$(EXEEXT) \
+-fribidi_create_char_types$(EXEEXT) fribidi_create_mirroring$(EXEEXT)
+-PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
+-
+-fribidi_OBJECTS = fribidi_main.$(OBJEXT) getopt.$(OBJEXT) \
+-getopt1.$(OBJEXT)
+-fribidi_DEPENDENCIES = libfribidi.la
+-fribidi_LDFLAGS =
+-fribidi_benchmark_OBJECTS = fribidi_benchmark.$(OBJEXT) \
+-getopt.$(OBJEXT) getopt1.$(OBJEXT)
+-fribidi_benchmark_DEPENDENCIES = libfribidi.la
+-fribidi_benchmark_LDFLAGS =
+-fribidi_create_char_types_OBJECTS = fribidi_create_char_types.$(OBJEXT) \
+-packtab.$(OBJEXT)
+-fribidi_create_char_types_LDADD = $(LDADD)
+-fribidi_create_char_types_DEPENDENCIES =
+-fribidi_create_char_types_LDFLAGS =
+-fribidi_create_mirroring_OBJECTS = fribidi_create_mirroring.$(OBJEXT)
+-fribidi_create_mirroring_LDADD = $(LDADD)
+-fribidi_create_mirroring_DEPENDENCIES =
+-fribidi_create_mirroring_LDFLAGS =
+-SCRIPTS = $(bin_SCRIPTS)
+-
+-CFLAGS = @CFLAGS@
+-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
++depcomp = $(SHELL) $(top_srcdir)/depcomp
++am__depfiles_maybe = depfiles
++@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/fribidi.Plo \
++@AMDEP_TRUE@ ./$(DEPDIR)/fribidi_benchmark.Po \
++@AMDEP_TRUE@ ./$(DEPDIR)/fribidi_char_sets.Plo \
++@AMDEP_TRUE@ ./$(DEPDIR)/fribidi_char_sets_cap_rtl.Plo \
++@AMDEP_TRUE@ ./$(DEPDIR)/fribidi_char_sets_cp1255.Plo \
++@AMDEP_TRUE@ ./$(DEPDIR)/fribidi_char_sets_cp1256.Plo \
++@AMDEP_TRUE@ ./$(DEPDIR)/fribidi_char_sets_isiri_3342.Plo \
++@AMDEP_TRUE@ ./$(DEPDIR)/fribidi_char_sets_iso8859_6.Plo \
++@AMDEP_TRUE@ ./$(DEPDIR)/fribidi_char_sets_iso8859_8.Plo \
++@AMDEP_TRUE@ ./$(DEPDIR)/fribidi_char_sets_utf8.Plo \
++@AMDEP_TRUE@ ./$(DEPDIR)/fribidi_char_type.Plo \
++@AMDEP_TRUE@ ./$(DEPDIR)/fribidi_create_char_types.Po \
++@AMDEP_TRUE@ ./$(DEPDIR)/fribidi_create_mirroring.Po \
++@AMDEP_TRUE@ ./$(DEPDIR)/fribidi_main.Po \
++@AMDEP_TRUE@ ./$(DEPDIR)/fribidi_mem.Plo \
++@AMDEP_TRUE@ ./$(DEPDIR)/fribidi_mirroring.Plo \
++@AMDEP_TRUE@ ./$(DEPDIR)/fribidi_types.Plo \
++@AMDEP_TRUE@ ./$(DEPDIR)/fribidi_utils.Plo \
++@AMDEP_TRUE@ ./$(DEPDIR)/fribidi_wcwidth.Plo \
++@AMDEP_TRUE@ ./$(DEPDIR)/getopt.Po ./$(DEPDIR)/getopt1.Po \
++@AMDEP_TRUE@ ./$(DEPDIR)/packtab.Po
++COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
++ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
++LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \
++ $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+ CCLD = $(CC)
+-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
+-DATA = $(pkgconfig_DATA)
+-
+-HEADERS = $(libfribidiinc_HEADERS)
+-
+-DIST_COMMON = README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \
+-Makefile.am Makefile.in NEWS THANKS TODO acconfig.h acinclude.m4 \
+-aclocal.m4 config.guess config.h.in config.sub configure configure.in \
+-fribidi-config.in fribidi.pc.in fribidi.spec.in fribidi_config.h.in \
+-install-sh ltconfig ltmain.sh missing mkinstalldirs
+-
+-
+-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+-
+-TAR = gtar
+-GZIP_ENV = --best
++LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
++ $(AM_LDFLAGS) $(LDFLAGS) -o $@
++CFLAGS = @CFLAGS@
++DIST_SOURCES = $(libfribidi_la_SOURCES) $(fribidi_SOURCES) \
++ $(fribidi_benchmark_SOURCES) \
++ $(fribidi_create_char_types_SOURCES) \
++ $(fribidi_create_mirroring_SOURCES)
++DATA = $(pkgconfig_DATA)
++
++HEADERS = $(libfribidiinc_HEADERS)
++
++DIST_COMMON = README $(libfribidiinc_HEADERS) AUTHORS COPYING ChangeLog \
++ INSTALL Makefile.am Makefile.in NEWS THANKS TODO acconfig.h \
++ acinclude.m4 aclocal.m4 config.guess config.h.in config.sub \
++ configure configure.in depcomp fribidi-config.in fribidi.pc.in \
++ fribidi.spec.in fribidi_config.h.in install-sh ltconfig \
++ ltmain.sh missing mkinstalldirs
+ SOURCES = $(libfribidi_la_SOURCES) $(fribidi_SOURCES) $(fribidi_benchmark_SOURCES) $(fribidi_create_char_types_SOURCES) $(fribidi_create_mirroring_SOURCES)
+-OBJECTS = $(libfribidi_la_OBJECTS) $(fribidi_OBJECTS) $(fribidi_benchmark_OBJECTS) $(fribidi_create_char_types_OBJECTS) $(fribidi_create_mirroring_OBJECTS)
+
+-all: all-redirect
+-.SUFFIXES:
+-.SUFFIXES: .S .c .lo .o .obj .s
+-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile
+-
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+- cd $(top_builddir) \
+- && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
++all: config.h
++ $(MAKE) $(AM_MAKEFLAGS) all-am
+
+-$(ACLOCAL_M4): configure.in acinclude.m4
+- cd $(srcdir) && $(ACLOCAL)
++.SUFFIXES:
++.SUFFIXES: .c .lo .o .obj
++$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
++ cd $(top_srcdir) && \
++ $(AUTOMAKE) --gnu Makefile
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
+
+-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
++$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+-$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
++$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+ cd $(srcdir) && $(AUTOCONF)
+-stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
+- cd $(top_builddir) \
+- && CONFIG_FILES= CONFIG_HEADERS=config.h \
+- $(SHELL) ./config.status
+- @echo timestamp > stamp-h 2> /dev/null
+-$(srcdir)/config.h.in: $(srcdir)/stamp-h.in
+- @if test ! -f $@; then \
+- rm -f $(srcdir)/stamp-h.in; \
+- $(MAKE) $(srcdir)/stamp-h.in; \
+- else :; fi
+-$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
+- cd $(top_srcdir) && $(AUTOHEADER)
+- @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
+
+-mostlyclean-hdr:
++$(ACLOCAL_M4): configure.in acinclude.m4
++ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
++
++stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
++ @rm -f stamp-h1
++ cd $(top_builddir) && $(SHELL) ./config.status config.h
+
+-clean-hdr:
++$(srcdir)/config.h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/acconfig.h
++ cd $(top_srcdir) && $(AUTOHEADER)
++ touch $(srcdir)/config.h.in
+
+ distclean-hdr:
+ -rm -f config.h
+-
+-maintainer-clean-hdr:
+ fribidi_config.h: $(top_builddir)/config.status fribidi_config.h.in
+- cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
++ cd $(top_builddir) && $(SHELL) ./config.status $@
+ fribidi-config: $(top_builddir)/config.status fribidi-config.in
+- cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
++ cd $(top_builddir) && $(SHELL) ./config.status $@
+ fribidi.pc: $(top_builddir)/config.status fribidi.pc.in
+- cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
++ cd $(top_builddir) && $(SHELL) ./config.status $@
+ fribidi.spec: $(top_builddir)/config.status fribidi.spec.in
+- cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+-
+-mostlyclean-libLTLIBRARIES:
+-
+-clean-libLTLIBRARIES:
+- -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+-
+-distclean-libLTLIBRARIES:
+-
+-maintainer-clean-libLTLIBRARIES:
+-
++ cd $(top_builddir) && $(SHELL) ./config.status $@
++libLTLIBRARIES_INSTALL = $(INSTALL)
+ install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+ @$(NORMAL_INSTALL)
+ $(mkinstalldirs) $(DESTDIR)$(libdir)
+ @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+ if test -f $$p; then \
+- echo "$(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \
+- $(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \
++ f="`echo $$p | sed -e 's|^.*/||'`"; \
++ echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f"; \
++ $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f; \
+ else :; fi; \
+ done
+
+ uninstall-libLTLIBRARIES:
+ @$(NORMAL_UNINSTALL)
+- list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+- $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
++ @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
++ p="`echo $$p | sed -e 's|^.*/||'`"; \
++ echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p"; \
++ $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
+ done
+
+-.c.o:
+- $(COMPILE) -c $<
+-
+-# FIXME: We should only use cygpath when building on Windows,
+-# and only if it is available.
+-.c.obj:
+- $(COMPILE) -c `cygpath -w $<`
+-
+-.s.o:
+- $(COMPILE) -c $<
+-
+-.S.o:
+- $(COMPILE) -c $<
+-
+-mostlyclean-compile:
+- -rm -f *.o core *.core
+- -rm -f *.$(OBJEXT)
+-
+-clean-compile:
+-
+-distclean-compile:
+- -rm -f *.tab.c
+-
+-maintainer-clean-compile:
+-
+-.c.lo:
+- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+-
+-.s.lo:
+- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+-
+-.S.lo:
+- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+-
+-mostlyclean-libtool:
+- -rm -f *.lo
+-
+-clean-libtool:
+- -rm -rf .libs _libs
+-
+-distclean-libtool:
+-
+-maintainer-clean-libtool:
+-
+-libfribidi.la: $(libfribidi_la_OBJECTS) $(libfribidi_la_DEPENDENCIES)
++clean-libLTLIBRARIES:
++ -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
++libfribidi.la: $(libfribidi_la_OBJECTS) $(libfribidi_la_DEPENDENCIES)
+ $(LINK) -rpath $(libdir) $(libfribidi_la_LDFLAGS) $(libfribidi_la_OBJECTS) $(libfribidi_la_LIBADD) $(LIBS)
+-
+-mostlyclean-binPROGRAMS:
+-
+-clean-binPROGRAMS:
+- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+-
+-distclean-binPROGRAMS:
+-
+-maintainer-clean-binPROGRAMS:
+-
++binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+ install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ $(mkinstalldirs) $(DESTDIR)$(bindir)
+ @list='$(bin_PROGRAMS)'; for p in $$list; do \
+- if test -f $$p; then \
+- echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
+- $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
++ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
++ if test -f $$p \
++ || test -f $$p1 \
++ ; then \
++ p1=`echo "$$p1" | sed -e 's,^.*/,,'`; \
++ f=`echo $$p1|sed '$(transform);s/$$/$(EXEEXT)/'`; \
++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \
++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f; \
+ else :; fi; \
+ done
+
+ uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+- list='$(bin_PROGRAMS)'; for p in $$list; do \
+- rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
++ @list='$(bin_PROGRAMS)'; for p in $$list; do \
++ f=`echo $$p|sed 's/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
++ f=`echo "$$f" | sed -e 's,^.*/,,'`; \
++ echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
++ rm -f $(DESTDIR)$(bindir)/$$f; \
+ done
+
+-mostlyclean-noinstPROGRAMS:
++clean-binPROGRAMS:
++ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+
+ clean-noinstPROGRAMS:
+ -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
+-
+-distclean-noinstPROGRAMS:
+-
+-maintainer-clean-noinstPROGRAMS:
+-
+-fribidi$(EXEEXT): $(fribidi_OBJECTS) $(fribidi_DEPENDENCIES)
++fribidi$(EXEEXT): $(fribidi_OBJECTS) $(fribidi_DEPENDENCIES)
+ @rm -f fribidi$(EXEEXT)
+ $(LINK) $(fribidi_LDFLAGS) $(fribidi_OBJECTS) $(fribidi_LDADD) $(LIBS)
+-
+-fribidi_benchmark$(EXEEXT): $(fribidi_benchmark_OBJECTS) $(fribidi_benchmark_DEPENDENCIES)
++fribidi_benchmark$(EXEEXT): $(fribidi_benchmark_OBJECTS) $(fribidi_benchmark_DEPENDENCIES)
+ @rm -f fribidi_benchmark$(EXEEXT)
+ $(LINK) $(fribidi_benchmark_LDFLAGS) $(fribidi_benchmark_OBJECTS) $(fribidi_benchmark_LDADD) $(LIBS)
+-
+-fribidi_create_char_types$(EXEEXT): $(fribidi_create_char_types_OBJECTS) $(fribidi_create_char_types_DEPENDENCIES)
++fribidi_create_char_types$(EXEEXT): $(fribidi_create_char_types_OBJECTS) $(fribidi_create_char_types_DEPENDENCIES)
+ @rm -f fribidi_create_char_types$(EXEEXT)
+ $(LINK) $(fribidi_create_char_types_LDFLAGS) $(fribidi_create_char_types_OBJECTS) $(fribidi_create_char_types_LDADD) $(LIBS)
+-
+-fribidi_create_mirroring$(EXEEXT): $(fribidi_create_mirroring_OBJECTS) $(fribidi_create_mirroring_DEPENDENCIES)
++fribidi_create_mirroring$(EXEEXT): $(fribidi_create_mirroring_OBJECTS) $(fribidi_create_mirroring_DEPENDENCIES)
+ @rm -f fribidi_create_mirroring$(EXEEXT)
+ $(LINK) $(fribidi_create_mirroring_LDFLAGS) $(fribidi_create_mirroring_OBJECTS) $(fribidi_create_mirroring_LDADD) $(LIBS)
+-
+ install-binSCRIPTS: $(bin_SCRIPTS)
+ @$(NORMAL_INSTALL)
+ $(mkinstalldirs) $(DESTDIR)$(bindir)
+ @list='$(bin_SCRIPTS)'; for p in $$list; do \
++ f="`echo $$p|sed '$(transform)'`"; \
+ if test -f $$p; then \
+- echo " $(INSTALL_SCRIPT) $$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`"; \
+- $(INSTALL_SCRIPT) $$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`; \
+- else if test -f $(srcdir)/$$p; then \
+- echo " $(INSTALL_SCRIPT) $(srcdir)/$$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`"; \
+- $(INSTALL_SCRIPT) $(srcdir)/$$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`; \
+- else :; fi; fi; \
++ echo " $(INSTALL_SCRIPT) $$p $(DESTDIR)$(bindir)/$$f"; \
++ $(INSTALL_SCRIPT) $$p $(DESTDIR)$(bindir)/$$f; \
++ elif test -f $(srcdir)/$$p; then \
++ echo " $(INSTALL_SCRIPT) $(srcdir)/$$p $(DESTDIR)$(bindir)/$$f"; \
++ $(INSTALL_SCRIPT) $(srcdir)/$$p $(DESTDIR)$(bindir)/$$f; \
++ else :; fi; \
+ done
+
+ uninstall-binSCRIPTS:
+ @$(NORMAL_UNINSTALL)
+- list='$(bin_SCRIPTS)'; for p in $$list; do \
+- rm -f $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`; \
++ @list='$(bin_SCRIPTS)'; for p in $$list; do \
++ f="`echo $$p|sed '$(transform)'`"; \
++ echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
++ rm -f $(DESTDIR)$(bindir)/$$f; \
+ done
+
++mostlyclean-compile:
++ -rm -f *.$(OBJEXT) core *.core
++
++distclean-compile:
++ -rm -f *.tab.c
++
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fribidi.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fribidi_benchmark.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fribidi_char_sets.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fribidi_char_sets_cap_rtl.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fribidi_char_sets_cp1255.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fribidi_char_sets_cp1256.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fribidi_char_sets_isiri_3342.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fribidi_char_sets_iso8859_6.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fribidi_char_sets_iso8859_8.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fribidi_char_sets_utf8.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fribidi_char_type.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fribidi_create_char_types.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fribidi_create_mirroring.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fribidi_main.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fribidi_mem.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fribidi_mirroring.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fribidi_types.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fribidi_utils.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fribidi_wcwidth.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt1.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/packtab.Po@am__quote@
++
++distclean-depend:
++ -rm -rf ./$(DEPDIR)
++
++.c.o:
++@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
++
++.c.obj:
++@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ $(COMPILE) -c `cygpath -w $<`
++
++.c.lo:
++@AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
++@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
++CCDEPMODE = @CCDEPMODE@
++
++mostlyclean-libtool:
++ -rm -f *.lo
++
++clean-libtool:
++ -rm -rf .libs _libs
++
++distclean-libtool:
++ -rm -f libtool
++uninstall-info-am:
++pkgconfigDATA_INSTALL = $(INSTALL_DATA)
+ install-pkgconfigDATA: $(pkgconfig_DATA)
+ @$(NORMAL_INSTALL)
+ $(mkinstalldirs) $(DESTDIR)$(pkgconfigdir)
+ @list='$(pkgconfig_DATA)'; for p in $$list; do \
+- if test -f $(srcdir)/$$p; then \
+- echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkgconfigdir)/$$p"; \
+- $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkgconfigdir)/$$p; \
+- else if test -f $$p; then \
+- echo " $(INSTALL_DATA) $$p $(DESTDIR)$(pkgconfigdir)/$$p"; \
+- $(INSTALL_DATA) $$p $(DESTDIR)$(pkgconfigdir)/$$p; \
+- fi; fi; \
++ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
++ f="`echo $$p | sed -e 's|^.*/||'`"; \
++ echo " $(pkgconfigDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgconfigdir)/$$f"; \
++ $(pkgconfigDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgconfigdir)/$$f; \
+ done
+
+ uninstall-pkgconfigDATA:
+ @$(NORMAL_UNINSTALL)
+- list='$(pkgconfig_DATA)'; for p in $$list; do \
+- rm -f $(DESTDIR)$(pkgconfigdir)/$$p; \
++ @list='$(pkgconfig_DATA)'; for p in $$list; do \
++ f="`echo $$p | sed -e 's|^.*/||'`"; \
++ echo " rm -f $(DESTDIR)$(pkgconfigdir)/$$f"; \
++ rm -f $(DESTDIR)$(pkgconfigdir)/$$f; \
+ done
+-
++libfribidiincHEADERS_INSTALL = $(INSTALL_HEADER)
+ install-libfribidiincHEADERS: $(libfribidiinc_HEADERS)
+ @$(NORMAL_INSTALL)
+ $(mkinstalldirs) $(DESTDIR)$(libfribidiincdir)
+ @list='$(libfribidiinc_HEADERS)'; for p in $$list; do \
+- if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \
+- echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(libfribidiincdir)/$$p"; \
+- $(INSTALL_DATA) $$d$$p $(DESTDIR)$(libfribidiincdir)/$$p; \
++ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
++ f="`echo $$p | sed -e 's|^.*/||'`"; \
++ echo " $(libfribidiincHEADERS_INSTALL) $$d$$p $(DESTDIR)$(libfribidiincdir)/$$f"; \
++ $(libfribidiincHEADERS_INSTALL) $$d$$p $(DESTDIR)$(libfribidiincdir)/$$f; \
+ done
+
+ uninstall-libfribidiincHEADERS:
+ @$(NORMAL_UNINSTALL)
+- list='$(libfribidiinc_HEADERS)'; for p in $$list; do \
+- rm -f $(DESTDIR)$(libfribidiincdir)/$$p; \
++ @list='$(libfribidiinc_HEADERS)'; for p in $$list; do \
++ f="`echo $$p | sed -e 's|^.*/||'`"; \
++ echo " rm -f $(DESTDIR)$(libfribidiincdir)/$$f"; \
++ rm -f $(DESTDIR)$(libfribidiincdir)/$$f; \
+ done
+
++ETAGS = etags
++ETAGSFLAGS =
++
+ tags: TAGS
+
+-ID: $(HEADERS) $(SOURCES) $(LISP)
+- list='$(SOURCES) $(HEADERS)'; \
+- unique=`for i in $$list; do echo $$i; done | \
+- awk ' { files[$$0] = 1; } \
++ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
++ unique=`for i in $$list; do \
++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++ done | \
++ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+- here=`pwd` && cd $(srcdir) \
+- && mkid -f$$here/ID $$unique $(LISP)
++ mkid -fID $$unique
+
+-TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
++TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
++ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+- list='$(SOURCES) $(HEADERS)'; \
+- unique=`for i in $$list; do echo $$i; done | \
+- awk ' { files[$$0] = 1; } \
++ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
++ unique=`for i in $$list; do \
++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++ done | \
++ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+- test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)
+-
+-mostlyclean-tags:
+-
+-clean-tags:
++ test -z "$(ETAGS_ARGS)$$tags$$unique" \
++ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
++ $$tags $$unique
++
++GTAGS:
++ here=`$(am__cd) $(top_builddir) && pwd` \
++ && cd $(top_srcdir) \
++ && gtags -i $(GTAGS_ARGS) $$here
+
+ distclean-tags:
+- -rm -f TAGS ID
++ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+
+-maintainer-clean-tags:
++check-TESTS: $(TESTS)
++ @failed=0; all=0; xfail=0; xpass=0; \
++ srcdir=$(srcdir); export srcdir; \
++ list='$(TESTS)'; \
++ if test -n "$$list"; then \
++ for tst in $$list; do \
++ if test -f ./$$tst; then dir=./; \
++ elif test -f $$tst; then dir=; \
++ else dir="$(srcdir)/"; fi; \
++ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
++ all=`expr $$all + 1`; \
++ case " $(XFAIL_TESTS) " in \
++ *" $$tst "*) \
++ xpass=`expr $$xpass + 1`; \
++ failed=`expr $$failed + 1`; \
++ echo "XPASS: $$tst"; \
++ ;; \
++ *) \
++ echo "PASS: $$tst"; \
++ ;; \
++ esac; \
++ elif test $$? -ne 77; then \
++ all=`expr $$all + 1`; \
++ case " $(XFAIL_TESTS) " in \
++ *" $$tst "*) \
++ xfail=`expr $$xfail + 1`; \
++ echo "XFAIL: $$tst"; \
++ ;; \
++ *) \
++ failed=`expr $$failed + 1`; \
++ echo "FAIL: $$tst"; \
++ ;; \
++ esac; \
++ fi; \
++ done; \
++ if test "$$failed" -eq 0; then \
++ if test "$$xfail" -eq 0; then \
++ banner="All $$all tests passed"; \
++ else \
++ banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
++ fi; \
++ else \
++ if test "$$xpass" -eq 0; then \
++ banner="$$failed of $$all tests failed"; \
++ else \
++ banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
++ fi; \
++ fi; \
++ dashes=`echo "$$banner" | sed s/./=/g`; \
++ echo "$$dashes"; \
++ echo "$$banner"; \
++ echo "$$dashes"; \
++ test "$$failed" -eq 0; \
++ else :; fi
++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
++top_distdir = .
+ distdir = $(PACKAGE)-$(VERSION)
+-top_distdir = $(distdir)
++
++am__remove_distdir = \
++ { test ! -d $(distdir) \
++ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
++ && rm -fr $(distdir); }; }
++
++GZIP_ENV = --best
++distcleancheck_listfiles = find . -type f -print
++
++distdir: $(DISTFILES)
++ $(am__remove_distdir)
++ mkdir $(distdir)
++ $(mkinstalldirs) $(distdir)/. $(distdir)/tests $(distdir)/unidata
++ @for file in $(DISTFILES); do \
++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
++ dir="/$$dir"; \
++ $(mkinstalldirs) "$(distdir)$$dir"; \
++ else \
++ dir=''; \
++ fi; \
++ if test -d $$d/$$file; then \
++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
++ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
++ fi; \
++ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
++ else \
++ test -f $(distdir)/$$file \
++ || cp -p $$d/$$file $(distdir)/$$file \
++ || exit 1; \
++ fi; \
++ done
++ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
++ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
++ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
++ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
++ || chmod -R a+r $(distdir)
++dist-gzip: distdir
++ $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
++ $(am__remove_distdir)
++
++dist dist-all: distdir
++ $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
++ $(am__remove_distdir)
+
+ # This target untars the dist file and tries a VPATH configuration. Then
+ # it guarantees that the distribution is self-contained by making another
+ # tarfile.
+ distcheck: dist
+- -rm -rf $(distdir)
+- GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
++ $(am__remove_distdir)
++ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
++ chmod -R a-w $(distdir); chmod a+w $(distdir)
+ mkdir $(distdir)/=build
+ mkdir $(distdir)/=inst
+- dc_install_base=`cd $(distdir)/=inst && pwd`; \
+- cd $(distdir)/=build \
++ chmod a-w $(distdir)
++ dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
++ && cd $(distdir)/=build \
+ && ../configure --srcdir=.. --prefix=$$dc_install_base \
++ $(DISTCHECK_CONFIGURE_FLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+- && $(MAKE) $(AM_MAKEFLAGS) dist
+- -rm -rf $(distdir)
+- @banner="$(distdir).tar.gz is ready for distribution"; \
+- dashes=`echo "$$banner" | sed s/./=/g`; \
+- echo "$$dashes"; \
+- echo "$$banner"; \
+- echo "$$dashes"
+-dist: distdir
+- -chmod -R a+r $(distdir)
+- GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+- -rm -rf $(distdir)
+-dist-all: distdir
+- -chmod -R a+r $(distdir)
+- GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+- -rm -rf $(distdir)
+-distdir: $(DISTFILES)
+- -rm -rf $(distdir)
+- mkdir $(distdir)
+- -chmod 777 $(distdir)
+- $(mkinstalldirs) $(distdir)/tests $(distdir)/unidata
+- @for file in $(DISTFILES); do \
+- d=$(srcdir); \
+- if test -d $$d/$$file; then \
+- cp -pr $$d/$$file $(distdir)/$$file; \
+- else \
+- test -f $(distdir)/$$file \
+- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+- || cp -p $$d/$$file $(distdir)/$$file || :; \
+- fi; \
+- done
+-fribidi.lo fribidi.o : fribidi.c config.h fribidi.h fribidi_config.h \
+- fribidi_unicode.h fribidi_types.h fribidi_mem.h \
+- fribidi_char_sets.h fribidi_char_sets_cap_rtl.h \
+- fribidi_char_sets_utf8.h fribidi_char_sets_iso8859_6.h \
+- fribidi_char_sets_iso8859_8.h fribidi_char_sets_cp1255.h \
+- fribidi_char_sets_cp1256.h fribidi_char_sets_isiri_3342.h
+-fribidi_benchmark.o: fribidi_benchmark.c config.h getopt.h fribidi.h \
+- fribidi_config.h fribidi_unicode.h fribidi_types.h \
+- fribidi_mem.h fribidi_char_sets.h fribidi_char_sets_cap_rtl.h \
+- fribidi_char_sets_utf8.h fribidi_char_sets_iso8859_6.h \
+- fribidi_char_sets_iso8859_8.h fribidi_char_sets_cp1255.h \
+- fribidi_char_sets_cp1256.h fribidi_char_sets_isiri_3342.h
+-fribidi_char_sets.lo fribidi_char_sets.o : fribidi_char_sets.c \
+- fribidi_config.h fribidi_char_sets.h fribidi.h \
+- fribidi_unicode.h fribidi_types.h fribidi_mem.h \
+- fribidi_char_sets_cap_rtl.h fribidi_char_sets_utf8.h \
+- fribidi_char_sets_iso8859_6.h fribidi_char_sets_iso8859_8.h \
+- fribidi_char_sets_cp1255.h fribidi_char_sets_cp1256.h \
+- fribidi_char_sets_isiri_3342.h
+-fribidi_char_sets_cap_rtl.lo fribidi_char_sets_cap_rtl.o : \
+- fribidi_char_sets_cap_rtl.c fribidi_config.h fribidi.h \
+- fribidi_unicode.h fribidi_types.h fribidi_mem.h \
+- fribidi_char_sets.h fribidi_char_sets_cap_rtl.h \
+- fribidi_char_sets_utf8.h fribidi_char_sets_iso8859_6.h \
+- fribidi_char_sets_iso8859_8.h fribidi_char_sets_cp1255.h \
+- fribidi_char_sets_cp1256.h fribidi_char_sets_isiri_3342.h
+-fribidi_char_sets_cp1255.lo fribidi_char_sets_cp1255.o : \
+- fribidi_char_sets_cp1255.c fribidi_config.h fribidi.h \
+- fribidi_unicode.h fribidi_types.h fribidi_mem.h \
+- fribidi_char_sets.h fribidi_char_sets_cap_rtl.h \
+- fribidi_char_sets_utf8.h fribidi_char_sets_iso8859_6.h \
+- fribidi_char_sets_iso8859_8.h fribidi_char_sets_cp1255.h \
+- fribidi_char_sets_cp1256.h fribidi_char_sets_isiri_3342.h
+-fribidi_char_sets_cp1256.lo fribidi_char_sets_cp1256.o : \
+- fribidi_char_sets_cp1256.c fribidi_config.h fribidi.h \
+- fribidi_unicode.h fribidi_types.h fribidi_mem.h \
+- fribidi_char_sets.h fribidi_char_sets_cap_rtl.h \
+- fribidi_char_sets_utf8.h fribidi_char_sets_iso8859_6.h \
+- fribidi_char_sets_iso8859_8.h fribidi_char_sets_cp1255.h \
+- fribidi_char_sets_cp1256.h fribidi_char_sets_isiri_3342.h
+-fribidi_char_sets_isiri_3342.lo fribidi_char_sets_isiri_3342.o : \
+- fribidi_char_sets_isiri_3342.c fribidi_config.h fribidi.h \
+- fribidi_unicode.h fribidi_types.h fribidi_mem.h \
+- fribidi_char_sets.h fribidi_char_sets_cap_rtl.h \
+- fribidi_char_sets_utf8.h fribidi_char_sets_iso8859_6.h \
+- fribidi_char_sets_iso8859_8.h fribidi_char_sets_cp1255.h \
+- fribidi_char_sets_cp1256.h fribidi_char_sets_isiri_3342.h
+-fribidi_char_sets_iso8859_6.lo fribidi_char_sets_iso8859_6.o : \
+- fribidi_char_sets_iso8859_6.c fribidi_config.h fribidi.h \
+- fribidi_unicode.h fribidi_types.h fribidi_mem.h \
+- fribidi_char_sets.h fribidi_char_sets_cap_rtl.h \
+- fribidi_char_sets_utf8.h fribidi_char_sets_iso8859_6.h \
+- fribidi_char_sets_iso8859_8.h fribidi_char_sets_cp1255.h \
+- fribidi_char_sets_cp1256.h fribidi_char_sets_isiri_3342.h
+-fribidi_char_sets_iso8859_8.lo fribidi_char_sets_iso8859_8.o : \
+- fribidi_char_sets_iso8859_8.c fribidi_config.h fribidi.h \
+- fribidi_unicode.h fribidi_types.h fribidi_mem.h \
+- fribidi_char_sets.h fribidi_char_sets_cap_rtl.h \
+- fribidi_char_sets_utf8.h fribidi_char_sets_iso8859_6.h \
+- fribidi_char_sets_iso8859_8.h fribidi_char_sets_cp1255.h \
+- fribidi_char_sets_cp1256.h fribidi_char_sets_isiri_3342.h
+-fribidi_char_sets_utf8.lo fribidi_char_sets_utf8.o : \
+- fribidi_char_sets_utf8.c fribidi_config.h fribidi.h \
+- fribidi_unicode.h fribidi_types.h fribidi_mem.h \
+- fribidi_char_sets.h fribidi_char_sets_cap_rtl.h \
+- fribidi_char_sets_utf8.h fribidi_char_sets_iso8859_6.h \
+- fribidi_char_sets_iso8859_8.h fribidi_char_sets_cp1255.h \
+- fribidi_char_sets_cp1256.h fribidi_char_sets_isiri_3342.h
+-fribidi_char_type.lo fribidi_char_type.o : fribidi_char_type.c config.h \
+- fribidi.h fribidi_config.h fribidi_unicode.h fribidi_types.h \
+- fribidi_mem.h fribidi_char_sets.h fribidi_char_sets_cap_rtl.h \
+- fribidi_char_sets_utf8.h fribidi_char_sets_iso8859_6.h \
+- fribidi_char_sets_iso8859_8.h fribidi_char_sets_cp1255.h \
+- fribidi_char_sets_cp1256.h fribidi_char_sets_isiri_3342.h \
+- fribidi_tab_char_type_2.i
+-fribidi_create_char_types.o: fribidi_create_char_types.c packtab.h \
+- config.h fribidi_unicode.h fribidi_types.h fribidi_mem.h \
+- fribidi_config.h
+-fribidi_create_mirroring.o: fribidi_create_mirroring.c config.h \
+- fribidi_unicode.h fribidi_types.h fribidi_mem.h \
+- fribidi_config.h
+-fribidi_main.o: fribidi_main.c config.h getopt.h fribidi.h \
+- fribidi_config.h fribidi_unicode.h fribidi_types.h \
+- fribidi_mem.h fribidi_char_sets.h fribidi_char_sets_cap_rtl.h \
+- fribidi_char_sets_utf8.h fribidi_char_sets_iso8859_6.h \
+- fribidi_char_sets_iso8859_8.h fribidi_char_sets_cp1255.h \
+- fribidi_char_sets_cp1256.h fribidi_char_sets_isiri_3342.h
+-fribidi_mem.lo fribidi_mem.o : fribidi_mem.c fribidi_mem.h \
+- fribidi_config.h
+-fribidi_mirroring.lo fribidi_mirroring.o : fribidi_mirroring.c config.h \
+- fribidi.h fribidi_config.h fribidi_unicode.h fribidi_types.h \
+- fribidi_mem.h fribidi_char_sets.h fribidi_char_sets_cap_rtl.h \
+- fribidi_char_sets_utf8.h fribidi_char_sets_iso8859_6.h \
+- fribidi_char_sets_iso8859_8.h fribidi_char_sets_cp1255.h \
+- fribidi_char_sets_cp1256.h fribidi_char_sets_isiri_3342.h \
+- fribidi_tab_mirroring.i
+-fribidi_types.lo fribidi_types.o : fribidi_types.c config.h fribidi.h \
+- fribidi_config.h fribidi_unicode.h fribidi_types.h \
+- fribidi_mem.h fribidi_char_sets.h fribidi_char_sets_cap_rtl.h \
+- fribidi_char_sets_utf8.h fribidi_char_sets_iso8859_6.h \
+- fribidi_char_sets_iso8859_8.h fribidi_char_sets_cp1255.h \
+- fribidi_char_sets_cp1256.h fribidi_char_sets_isiri_3342.h
+-fribidi_utils.lo fribidi_utils.o : fribidi_utils.c fribidi.h \
+- fribidi_config.h fribidi_unicode.h fribidi_types.h \
+- fribidi_mem.h fribidi_char_sets.h fribidi_char_sets_cap_rtl.h \
+- fribidi_char_sets_utf8.h fribidi_char_sets_iso8859_6.h \
+- fribidi_char_sets_iso8859_8.h fribidi_char_sets_cp1255.h \
+- fribidi_char_sets_cp1256.h fribidi_char_sets_isiri_3342.h
+-fribidi_wcwidth.lo fribidi_wcwidth.o : fribidi_wcwidth.c \
+- fribidi_wcwidth.i fribidi.h fribidi_config.h fribidi_unicode.h \
+- fribidi_types.h fribidi_mem.h fribidi_char_sets.h \
+- fribidi_char_sets_cap_rtl.h fribidi_char_sets_utf8.h \
+- fribidi_char_sets_iso8859_6.h fribidi_char_sets_iso8859_8.h \
+- fribidi_char_sets_cp1255.h fribidi_char_sets_cp1256.h \
+- fribidi_char_sets_isiri_3342.h
+-getopt.o: getopt.c config.h
+-getopt1.o: getopt1.c config.h getopt.h
+-packtab.o: packtab.c packtab.h
+-
+-check-TESTS: $(TESTS)
+- @failed=0; all=0; \
+- srcdir=$(srcdir); export srcdir; \
+- for tst in $(TESTS); do \
+- if test -f $$tst; then dir=.; \
+- else dir="$(srcdir)"; fi; \
+- if $(TESTS_ENVIRONMENT) $$dir/$$tst; then \
+- all=`expr $$all + 1`; \
+- echo "PASS: $$tst"; \
+- elif test $$? -ne 77; then \
+- all=`expr $$all + 1`; \
+- failed=`expr $$failed + 1`; \
+- echo "FAIL: $$tst"; \
+- fi; \
+- done; \
+- if test "$$failed" -eq 0; then \
+- banner="All $$all tests passed"; \
+- else \
+- banner="$$failed of $$all tests failed"; \
+- fi; \
+- dashes=`echo "$$banner" | sed s/./=/g`; \
+- echo "$$dashes"; \
+- echo "$$banner"; \
+- echo "$$dashes"; \
+- test "$$failed" -eq 0
+-info-am:
+-info: info-am
+-dvi-am:
+-dvi: dvi-am
++ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
++ && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
++ || { echo "ERROR: files left after uninstall:" ; \
++ find $$dc_install_base -type f -print ; \
++ exit 1; } >&2 ) \
++ && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
++ && rm -f $(distdir).tar.gz \
++ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
++ $(am__remove_distdir)
++ @echo "$(distdir).tar.gz is ready for distribution" | \
++ sed 'h;s/./=/g;p;x;p;x'
++distcleancheck: distclean
++ if test '$(srcdir)' = . ; then \
++ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
++ exit 1 ; \
++ fi
++ test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
++ || { echo "ERROR: files left after distclean:" ; \
++ $(distcleancheck_listfiles) ; \
++ exit 1; } >&2
+ check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+ check: check-am
+-installcheck-am:
+-installcheck: installcheck-am
+-all-recursive-am: config.h
+- $(MAKE) $(AM_MAKEFLAGS) all-recursive
++all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(DATA) \
++ $(HEADERS) config.h
++install-binPROGRAMS: install-libLTLIBRARIES
+
+-install-exec-am: install-libLTLIBRARIES install-binPROGRAMS \
+- install-binSCRIPTS
+-install-exec: install-exec-am
+
+-install-data-am: install-pkgconfigDATA install-libfribidiincHEADERS
+-install-data: install-data-am
++installdirs:
++ $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(bindir) $(DESTDIR)$(bindir) $(DESTDIR)$(pkgconfigdir) $(DESTDIR)$(libfribidiincdir)
+
+-install-am: all-am
+- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+ install: install-am
+-uninstall-am: uninstall-libLTLIBRARIES uninstall-binPROGRAMS \
+- uninstall-binSCRIPTS uninstall-pkgconfigDATA \
+- uninstall-libfribidiincHEADERS
++install-exec: install-exec-am
++install-data: install-data-am
+ uninstall: uninstall-am
+-all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(DATA) \
+- $(HEADERS) config.h
+-all-redirect: all-am
+-install-strip:
+- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+-installdirs:
+- $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(bindir) \
+- $(DESTDIR)$(bindir) $(DESTDIR)$(pkgconfigdir) \
+- $(DESTDIR)$(libfribidiincdir)
+
++install-am: all-am
++ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
++installcheck: installcheck-am
++install-strip:
++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
++ INSTALL_STRIP_FLAG=-s \
++ `test -z '$(STRIP)' || \
++ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ mostlyclean-generic:
+
+ clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+ distclean-generic:
+- -rm -f Makefile $(CONFIG_CLEAN_FILES)
+- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
++ -rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+ -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+ maintainer-clean-generic:
++ @echo "This command is intended for maintainers to use"
++ @echo "it deletes files that may require special tools to rebuild."
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+-mostlyclean-am: mostlyclean-hdr mostlyclean-libLTLIBRARIES \
+- mostlyclean-compile mostlyclean-libtool \
+- mostlyclean-binPROGRAMS mostlyclean-noinstPROGRAMS \
+- mostlyclean-tags mostlyclean-generic
++clean: clean-am
+
+-mostlyclean: mostlyclean-am
++clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
++ clean-libtool clean-noinstPROGRAMS mostlyclean-am
+
+-clean-am: clean-hdr clean-libLTLIBRARIES clean-compile clean-libtool \
+- clean-binPROGRAMS clean-noinstPROGRAMS clean-tags \
+- clean-generic mostlyclean-am
++distclean: distclean-am
++ -rm -f config.status config.cache config.log
++distclean-am: clean-am distclean-compile distclean-depend \
++ distclean-generic distclean-hdr distclean-libtool \
++ distclean-tags
+
+-clean: clean-am
++dvi: dvi-am
+
+-distclean-am: distclean-hdr distclean-libLTLIBRARIES distclean-compile \
+- distclean-libtool distclean-binPROGRAMS \
+- distclean-noinstPROGRAMS distclean-tags \
+- distclean-generic clean-am
+- -rm -f libtool
++dvi-am:
+
+-distclean: distclean-am
+- -rm -f config.status
++info: info-am
+
+-maintainer-clean-am: maintainer-clean-hdr \
+- maintainer-clean-libLTLIBRARIES \
+- maintainer-clean-compile maintainer-clean-libtool \
+- maintainer-clean-binPROGRAMS \
+- maintainer-clean-noinstPROGRAMS maintainer-clean-tags \
+- maintainer-clean-generic distclean-am
+- @echo "This command is intended for maintainers to use;"
+- @echo "it deletes files that may require special tools to rebuild."
++info-am:
++
++install-data-am: install-libfribidiincHEADERS install-pkgconfigDATA
++
++install-exec-am: install-binPROGRAMS install-binSCRIPTS \
++ install-libLTLIBRARIES
++
++install-info: install-info-am
++
++install-man:
++
++installcheck-am:
+
+ maintainer-clean: maintainer-clean-am
+- -rm -f config.status
+
+-.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
+-mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \
+-clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \
+-uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \
+-distclean-compile clean-compile maintainer-clean-compile \
+-mostlyclean-libtool distclean-libtool clean-libtool \
+-maintainer-clean-libtool mostlyclean-binPROGRAMS distclean-binPROGRAMS \
+-clean-binPROGRAMS maintainer-clean-binPROGRAMS uninstall-binPROGRAMS \
+-install-binPROGRAMS mostlyclean-noinstPROGRAMS distclean-noinstPROGRAMS \
+-clean-noinstPROGRAMS maintainer-clean-noinstPROGRAMS \
+-uninstall-binSCRIPTS install-binSCRIPTS uninstall-pkgconfigDATA \
+-install-pkgconfigDATA uninstall-libfribidiincHEADERS \
+-install-libfribidiincHEADERS tags mostlyclean-tags distclean-tags \
+-clean-tags maintainer-clean-tags distdir check-TESTS info-am info \
+-dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
+-install-exec-am install-exec install-data-am install-data install-am \
+-install uninstall-am uninstall all-redirect all-am all installdirs \
+-mostlyclean-generic distclean-generic clean-generic \
+-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
++maintainer-clean-am: distclean-am maintainer-clean-generic
++
++mostlyclean: mostlyclean-am
++
++mostlyclean-am: mostlyclean-compile mostlyclean-generic \
++ mostlyclean-libtool
++
++uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
++ uninstall-info-am uninstall-libLTLIBRARIES \
++ uninstall-libfribidiincHEADERS uninstall-pkgconfigDATA
++
++.PHONY: GTAGS all all-am check check-TESTS check-am clean \
++ clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
++ clean-libtool clean-noinstPROGRAMS dist dist-all dist-gzip \
++ distcheck distclean distclean-compile distclean-depend \
++ distclean-generic distclean-hdr distclean-libtool \
++ distclean-tags distcleancheck distdir dvi dvi-am info info-am \
++ install install-am install-binPROGRAMS install-binSCRIPTS \
++ install-data install-data-am install-exec install-exec-am \
++ install-info install-info-am install-libLTLIBRARIES \
++ install-libfribidiincHEADERS install-man install-pkgconfigDATA \
++ install-strip installcheck installcheck-am installdirs \
++ maintainer-clean maintainer-clean-generic mostlyclean \
++ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
++ tags uninstall uninstall-am uninstall-binPROGRAMS \
++ uninstall-binSCRIPTS uninstall-info-am uninstall-libLTLIBRARIES \
++ uninstall-libfribidiincHEADERS uninstall-pkgconfigDATA
+
+
+ fribidi_tab_mirroring.i: $(fribidi_create_mirroring_SOURCES) \
+@@ -837,7 +899,6 @@
+
+ .PHONY: test test.reference \
+ fribidi_tab_char_type_small fribidi_tab_char_type_large
+-
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+ # Otherwise a system limit (for SysV at least) may be exceeded.
+ .NOEXPORT:
+diff -ruNa fribidi.old/acinclude.m4 fribidi/acinclude.m4
+--- fribidi.old/acinclude.m4 Fri Dec 14 15:25:17 2001
++++ fribidi/acinclude.m4 Sun Nov 2 00:51:21 2003
+@@ -1505,7 +1505,7 @@
+ ;;
+
+ darwin* | rhapsody*)
+- allow_undefined_flag='-undefined suppress'
++ allow_undefined_flag='-undefined error'
+ # FIXME: Relying on posixy $() will cause problems for
+ # cross-compilation, but unfortunately the echo tests do not
+ # yet detect zsh echo's removal of \ escapes.
+diff -ruNa fribidi.old/aclocal.m4 fribidi/aclocal.m4
+--- fribidi.old/aclocal.m4 Sun May 19 12:06:51 2002
++++ fribidi/aclocal.m4 Sun Nov 2 00:51:27 2003
+@@ -1,14 +1,15 @@
+-dnl aclocal.m4 generated automatically by aclocal 1.4
++# aclocal.m4 generated automatically by aclocal 1.6.1 -*- Autoconf -*-
+
+-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+-dnl This file is free software; the Free Software Foundation
+-dnl gives unlimited permission to copy and/or distribute it,
+-dnl with or without modifications, as long as this notice is preserved.
+-
+-dnl This program is distributed in the hope that it will be useful,
+-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+-dnl PARTICULAR PURPOSE.
++# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002
++# Free Software Foundation, Inc.
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
++# PARTICULAR PURPOSE.
+
+ # libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
+
+@@ -1469,7 +1470,7 @@
+ ;;
+
+ darwin* | rhapsody*)
+- allow_undefined_flag='-undefined suppress'
++ allow_undefined_flag='-undefined error'
+ # FIXME: Relying on posixy $() will cause problems for
+ # cross-compilation, but unfortunately the echo tests do not
+ # yet detect zsh echo's removal of \ escapes.
+@@ -3334,84 +3335,301 @@
+ # This is just to silence aclocal about the macro not being used
+ ifelse([AC_DISABLE_FAST_INSTALL])
+
+-# Like AC_CONFIG_HEADER, but automatically create stamp file.
++# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*-
+
+-AC_DEFUN(AM_CONFIG_HEADER,
+-[AC_PREREQ([2.12])
+-AC_CONFIG_HEADER([$1])
+-dnl When config.status generates a header, we must update the stamp-h file.
+-dnl This file resides in the same directory as the config header
+-dnl that is generated. We must strip everything past the first ":",
+-dnl and everything past the last "/".
+-AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
+-ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
+-<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
+-<<am_indx=1
+-for am_file in <<$1>>; do
+- case " <<$>>CONFIG_HEADERS " in
+- *" <<$>>am_file "*<<)>>
+- echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
+- ;;
+- esac
+- am_indx=`expr "<<$>>am_indx" + 1`
+-done<<>>dnl>>)
+-changequote([,]))])
+-
+-# Do all the work for Automake. This macro actually does too much --
+-# some checks are only needed if your package does certain things.
+-# But this isn't really a big deal.
+-
+-# serial 1
+-
+-dnl Usage:
+-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
+-
+-AC_DEFUN(AM_INIT_AUTOMAKE,
+-[AC_REQUIRE([AC_PROG_INSTALL])
+-PACKAGE=[$1]
+-AC_SUBST(PACKAGE)
+-VERSION=[$2]
+-AC_SUBST(VERSION)
+-dnl test to see if srcdir already configured
+-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
++# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++AC_PREREQ([2.52])
++
++# serial 6
++
++# When config.status generates a header, we must update the stamp-h file.
++# This file resides in the same directory as the config header
++# that is generated. We must strip everything past the first ":",
++# and everything past the last "/".
++
++# _AM_DIRNAME(PATH)
++# -----------------
++# Like AS_DIRNAME, only do it during macro expansion
++AC_DEFUN([_AM_DIRNAME],
++ [m4_if(regexp([$1], [^.*[^/]//*[^/][^/]*/*$]), -1,
++ m4_if(regexp([$1], [^//\([^/]\|$\)]), -1,
++ m4_if(regexp([$1], [^/.*]), -1,
++ [.],
++ patsubst([$1], [^\(/\).*], [\1])),
++ patsubst([$1], [^\(//\)\([^/].*\|$\)], [\1])),
++ patsubst([$1], [^\(.*[^/]\)//*[^/][^/]*/*$], [\1]))[]dnl
++])# _AM_DIRNAME
++
++
++# The stamp files are numbered to have different names.
++# We could number them on a directory basis, but that's additional
++# complications, let's have a unique counter.
++m4_define([_AM_STAMP_Count], [0])
++
++
++# _AM_STAMP(HEADER)
++# -----------------
++# The name of the stamp file for HEADER.
++AC_DEFUN([_AM_STAMP],
++[m4_define([_AM_STAMP_Count], m4_incr(_AM_STAMP_Count))dnl
++AS_ESCAPE(_AM_DIRNAME(patsubst([$1],
++ [:.*])))/stamp-h[]_AM_STAMP_Count])
++
++
++# _AM_CONFIG_HEADER(HEADER[:SOURCES], COMMANDS, INIT-COMMANDS)
++# ------------------------------------------------------------
++# We used to try to get a real timestamp in stamp-h. But the fear is that
++# that will cause unnecessary cvs conflicts.
++AC_DEFUN([_AM_CONFIG_HEADER],
++[# Add the stamp file to the list of files AC keeps track of,
++# along with our hook.
++AC_CONFIG_HEADERS([$1],
++ [# update the timestamp
++echo 'timestamp for $1' >"_AM_STAMP([$1])"
++$2],
++ [$3])
++])# _AM_CONFIG_HEADER
++
++
++# AM_CONFIG_HEADER(HEADER[:SOURCES]..., COMMANDS, INIT-COMMANDS)
++# --------------------------------------------------------------
++AC_DEFUN([AM_CONFIG_HEADER],
++[AC_FOREACH([_AM_File], [$1], [_AM_CONFIG_HEADER(_AM_File, [$2], [$3])])
++])# AM_CONFIG_HEADER
++
++# Do all the work for Automake. -*- Autoconf -*-
++
++# This macro actually does too much some checks are only needed if
++# your package does certain things. But this isn't really a big deal.
++
++# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002
++# Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 8
++
++# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
++# written in clear, in which case automake, when reading aclocal.m4,
++# will think it sees a *use*, and therefore will trigger all it's
++# C support machinery. Also note that it means that autoscan, seeing
++# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
++
++
++AC_PREREQ([2.52])
++
++# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow
++# the ones we care about.
++m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
++
++# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
++# AM_INIT_AUTOMAKE([OPTIONS])
++# -----------------------------------------------
++# The call with PACKAGE and VERSION arguments is the old style
++# call (pre autoconf-2.50), which is being phased out. PACKAGE
++# and VERSION should now be passed to AC_INIT and removed from
++# the call to AM_INIT_AUTOMAKE.
++# We support both call styles for the transition. After
++# the next Automake release, Autoconf can make the AC_INIT
++# arguments mandatory, and then we can depend on a new Autoconf
++# release and drop the old call support.
++AC_DEFUN([AM_INIT_AUTOMAKE],
++[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
++ AC_REQUIRE([AC_PROG_INSTALL])dnl
++# test to see if srcdir already configured
++if test "`cd $srcdir && pwd`" != "`pwd`" &&
++ test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+-ifelse([$3],,
+-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
+-AC_REQUIRE([AM_SANITY_CHECK])
+-AC_REQUIRE([AC_ARG_PROGRAM])
+-dnl FIXME This is truly gross.
+-missing_dir=`cd $ac_aux_dir && pwd`
+-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
+-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
+-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
+-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
+-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
+-AC_REQUIRE([AC_PROG_MAKE_SET])])
++
++# Define the identity of the package.
++dnl Distinguish between old-style and new-style calls.
++m4_ifval([$2],
++[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
++ AC_SUBST([PACKAGE], [$1])dnl
++ AC_SUBST([VERSION], [$2])],
++[_AM_SET_OPTIONS([$1])dnl
++ AC_SUBST([PACKAGE], [AC_PACKAGE_TARNAME])dnl
++ AC_SUBST([VERSION], [AC_PACKAGE_VERSION])])dnl
++
++_AM_IF_OPTION([no-define],,
++[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
++
++# Some tools Automake needs.
++AC_REQUIRE([AM_SANITY_CHECK])dnl
++AC_REQUIRE([AC_ARG_PROGRAM])dnl
++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
++AM_MISSING_PROG(AUTOCONF, autoconf)
++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
++AM_MISSING_PROG(AUTOHEADER, autoheader)
++AM_MISSING_PROG(MAKEINFO, makeinfo)
++AM_MISSING_PROG(AMTAR, tar)
++AM_PROG_INSTALL_SH
++AM_PROG_INSTALL_STRIP
++# We need awk for the "check" target. The system "awk" is bad on
++# some platforms.
++AC_REQUIRE([AC_PROG_AWK])dnl
++AC_REQUIRE([AC_PROG_MAKE_SET])dnl
++
++_AM_IF_OPTION([no-dependencies],,
++[AC_PROVIDE_IFELSE([AC_PROG_][CC],
++ [_AM_DEPENDENCIES(CC)],
++ [define([AC_PROG_][CC],
++ defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl
++AC_PROVIDE_IFELSE([AC_PROG_][CXX],
++ [_AM_DEPENDENCIES(CXX)],
++ [define([AC_PROG_][CXX],
++ defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl
++])
++])
++
++# Copyright 2002 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++
++# AM_AUTOMAKE_VERSION(VERSION)
++# ----------------------------
++# Automake X.Y traces this macro to ensure aclocal.m4 has been
++# generated from the m4 files accompanying Automake X.Y.
++AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.6"])
++
++# AM_SET_CURRENT_AUTOMAKE_VERSION
++# -------------------------------
++# Call AM_AUTOMAKE_VERSION so it can be traced.
++# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
++ [AM_AUTOMAKE_VERSION([1.6.1])])
++
++# Helper functions for option handling. -*- Autoconf -*-
++
++# Copyright 2001, 2002 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 2
++
++# _AM_MANGLE_OPTION(NAME)
++# -----------------------
++AC_DEFUN([_AM_MANGLE_OPTION],
++[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
++
++# _AM_SET_OPTION(NAME)
++# ------------------------------
++# Set option NAME. Presently that only means defining a flag for this option.
++AC_DEFUN([_AM_SET_OPTION],
++[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
++
++# _AM_SET_OPTIONS(OPTIONS)
++# ----------------------------------
++# OPTIONS is a space-separated list of Automake options.
++AC_DEFUN([_AM_SET_OPTIONS],
++[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
++
++# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
++# -------------------------------------------
++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
++AC_DEFUN([_AM_IF_OPTION],
++[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+ #
+ # Check to make sure that the build environment is sane.
+ #
+
+-AC_DEFUN(AM_SANITY_CHECK,
++# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 3
++
++# AM_SANITY_CHECK
++# ---------------
++AC_DEFUN([AM_SANITY_CHECK],
+ [AC_MSG_CHECKING([whether build environment is sane])
+ # Just in case
+ sleep 1
+-echo timestamp > conftestfile
++echo timestamp > conftest.file
+ # Do `set' in a subshell so we don't clobber the current shell's
+ # arguments. Must try -L first in case configure is actually a
+ # symlink; some systems play weird games with the mod time of symlinks
+ # (eg FreeBSD returns the mod time of the symlink's containing
+ # directory).
+ if (
+- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+- if test "[$]*" = "X"; then
++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
++ if test "$[*]" = "X"; then
+ # -L didn't work.
+- set X `ls -t $srcdir/configure conftestfile`
++ set X `ls -t $srcdir/configure conftest.file`
+ fi
+- if test "[$]*" != "X $srcdir/configure conftestfile" \
+- && test "[$]*" != "X conftestfile $srcdir/configure"; then
++ rm -f conftest.file
++ if test "$[*]" != "X $srcdir/configure conftest.file" \
++ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+@@ -3421,7 +3639,7 @@
+ alias in your environment])
+ fi
+
+- test "[$]2" = conftestfile
++ test "$[2]" = conftest.file
+ )
+ then
+ # Ok.
+@@ -3430,22 +3648,507 @@
+ AC_MSG_ERROR([newly created file is older than distributed files!
+ Check your system clock])
+ fi
+-rm -f conftest*
+ AC_MSG_RESULT(yes)])
+
+-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
+-dnl The program must properly implement --version.
+-AC_DEFUN(AM_MISSING_PROG,
+-[AC_MSG_CHECKING(for working $2)
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf. Sigh.
+-if ($2 --version) < /dev/null > /dev/null 2>&1; then
+- $1=$2
+- AC_MSG_RESULT(found)
++# -*- Autoconf -*-
++
++
++# Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 3
++
++# AM_MISSING_PROG(NAME, PROGRAM)
++# ------------------------------
++AC_DEFUN([AM_MISSING_PROG],
++[AC_REQUIRE([AM_MISSING_HAS_RUN])
++$1=${$1-"${am_missing_run}$2"}
++AC_SUBST($1)])
++
++
++# AM_MISSING_HAS_RUN
++# ------------------
++# Define MISSING if not defined so far and test if it supports --run.
++# If it does, set am_missing_run to use it, otherwise, to nothing.
++AC_DEFUN([AM_MISSING_HAS_RUN],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
++# Use eval to expand $SHELL
++if eval "$MISSING --run true"; then
++ am_missing_run="$MISSING --run "
+ else
+- $1="$3/missing $2"
+- AC_MSG_RESULT(missing)
++ am_missing_run=
++ AC_MSG_WARN([`missing' script is too old or missing])
+ fi
+-AC_SUBST($1)])
++])
++
++# AM_AUX_DIR_EXPAND
++
++# Copyright 2001 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
++# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
++# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
++#
++# Of course, Automake must honor this variable whenever it calls a
++# tool from the auxiliary directory. The problem is that $srcdir (and
++# therefore $ac_aux_dir as well) can be either absolute or relative,
++# depending on how configure is run. This is pretty annoying, since
++# it makes $ac_aux_dir quite unusable in subdirectories: in the top
++# source directory, any form will work fine, but in subdirectories a
++# relative path needs to be adjusted first.
++#
++# $ac_aux_dir/missing
++# fails when called from a subdirectory if $ac_aux_dir is relative
++# $top_srcdir/$ac_aux_dir/missing
++# fails if $ac_aux_dir is absolute,
++# fails when called from a subdirectory in a VPATH build with
++# a relative $ac_aux_dir
++#
++# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
++# are both prefixed by $srcdir. In an in-source build this is usually
++# harmless because $srcdir is `.', but things will broke when you
++# start a VPATH build or use an absolute $srcdir.
++#
++# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
++# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
++# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
++# and then we would define $MISSING as
++# MISSING="\${SHELL} $am_aux_dir/missing"
++# This will work as long as MISSING is not called from configure, because
++# unfortunately $(top_srcdir) has no meaning in configure.
++# However there are other variables, like CC, which are often used in
++# configure, and could therefore not use this "fixed" $ac_aux_dir.
++#
++# Another solution, used here, is to always expand $ac_aux_dir to an
++# absolute PATH. The drawback is that using absolute paths prevent a
++# configured tree to be moved without reconfiguration.
++
++# Rely on autoconf to set up CDPATH properly.
++AC_PREREQ([2.50])
++
++AC_DEFUN([AM_AUX_DIR_EXPAND], [
++# expand $ac_aux_dir to an absolute path
++am_aux_dir=`cd $ac_aux_dir && pwd`
++])
++
++# AM_PROG_INSTALL_SH
++# ------------------
++# Define $install_sh.
++
++# Copyright 2001 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++AC_DEFUN([AM_PROG_INSTALL_SH],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++install_sh=${install_sh-"$am_aux_dir/install-sh"}
++AC_SUBST(install_sh)])
++
++# AM_PROG_INSTALL_STRIP
++
++# Copyright 2001 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# One issue with vendor `install' (even GNU) is that you can't
++# specify the program used to strip binaries. This is especially
++# annoying in cross-compiling environments, where the build's strip
++# is unlikely to handle the host's binaries.
++# Fortunately install-sh will honor a STRIPPROG variable, so we
++# always use install-sh in `make install-strip', and initialize
++# STRIPPROG with the value of the STRIP variable (set by the user).
++AC_DEFUN([AM_PROG_INSTALL_STRIP],
++[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
++# Installed binaries are usually stripped using `strip' when the user
++# run `make install-strip'. However `strip' might not be the right
++# tool to use in cross-compilation environments, therefore Automake
++# will honor the `STRIP' environment variable to overrule this program.
++dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
++if test "$cross_compiling" != no; then
++ AC_CHECK_TOOL([STRIP], [strip], :)
++fi
++INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
++AC_SUBST([INSTALL_STRIP_PROGRAM])])
++
++# serial 4 -*- Autoconf -*-
++
++# Copyright 1999, 2000, 2001 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++
++# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
++# written in clear, in which case automake, when reading aclocal.m4,
++# will think it sees a *use*, and therefore will trigger all it's
++# C support machinery. Also note that it means that autoscan, seeing
++# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
++
++
++
++# _AM_DEPENDENCIES(NAME)
++# ----------------------
++# See how the compiler implements dependency checking.
++# NAME is "CC", "CXX", "GCJ", or "OBJC".
++# We try a few techniques and use that to set a single cache variable.
++#
++# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
++# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
++# dependency, and given that the user is not expected to run this macro,
++# just rely on AC_PROG_CC.
++AC_DEFUN([_AM_DEPENDENCIES],
++[AC_REQUIRE([AM_SET_DEPDIR])dnl
++AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
++AC_REQUIRE([AM_MAKE_INCLUDE])dnl
++AC_REQUIRE([AM_DEP_TRACK])dnl
++
++ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
++ [$1], CXX, [depcc="$CXX" am_compiler_list=],
++ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc']
++ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
++ [depcc="$$1" am_compiler_list=])
++
++AC_CACHE_CHECK([dependency style of $depcc],
++ [am_cv_$1_dependencies_compiler_type],
++[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
++ # We make a subdir and do the tests there. Otherwise we can end up
++ # making bogus files that we don't know about and never remove. For
++ # instance it was reported that on HP-UX the gcc test will end up
++ # making a dummy file named `D' -- because `-MD' means `put the output
++ # in D'.
++ mkdir conftest.dir
++ # Copy depcomp to subdir because otherwise we won't find it if we're
++ # using a relative directory.
++ cp "$am_depcomp" conftest.dir
++ cd conftest.dir
++
++ am_cv_$1_dependencies_compiler_type=none
++ if test "$am_compiler_list" = ""; then
++ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
++ fi
++ for depmode in $am_compiler_list; do
++ # We need to recreate these files for each test, as the compiler may
++ # overwrite some of them when testing with obscure command lines.
++ # This happens at least with the AIX C compiler.
++ echo '#include "conftest.h"' > conftest.c
++ echo 'int i;' > conftest.h
++ echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
++
++ case $depmode in
++ nosideeffect)
++ # after this tag, mechanisms are not by side-effect, so they'll
++ # only be used when explicitly requested
++ if test "x$enable_dependency_tracking" = xyes; then
++ continue
++ else
++ break
++ fi
++ ;;
++ none) break ;;
++ esac
++ # We check with `-c' and `-o' for the sake of the "dashmstdout"
++ # mode. It turns out that the SunPro C++ compiler does not properly
++ # handle `-M -o', and we need to detect this.
++ if depmode=$depmode \
++ source=conftest.c object=conftest.o \
++ depfile=conftest.Po tmpdepfile=conftest.TPo \
++ $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
++ grep conftest.h conftest.Po > /dev/null 2>&1 &&
++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
++ am_cv_$1_dependencies_compiler_type=$depmode
++ break
++ fi
++ done
++
++ cd ..
++ rm -rf conftest.dir
++else
++ am_cv_$1_dependencies_compiler_type=none
++fi
++])
++AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
++])
++
++
++# AM_SET_DEPDIR
++# -------------
++# Choose a directory name for dependency files.
++# This macro is AC_REQUIREd in _AM_DEPENDENCIES
++AC_DEFUN([AM_SET_DEPDIR],
++[rm -f .deps 2>/dev/null
++mkdir .deps 2>/dev/null
++if test -d .deps; then
++ DEPDIR=.deps
++else
++ # MS-DOS does not allow filenames that begin with a dot.
++ DEPDIR=_deps
++fi
++rmdir .deps 2>/dev/null
++AC_SUBST([DEPDIR])
++])
++
++
++# AM_DEP_TRACK
++# ------------
++AC_DEFUN([AM_DEP_TRACK],
++[AC_ARG_ENABLE(dependency-tracking,
++[ --disable-dependency-tracking Speeds up one-time builds
++ --enable-dependency-tracking Do not reject slow dependency extractors])
++if test "x$enable_dependency_tracking" != xno; then
++ am_depcomp="$ac_aux_dir/depcomp"
++ AMDEPBACKSLASH='\'
++fi
++AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
++AC_SUBST([AMDEPBACKSLASH])
++])
++
++# Generate code to set up dependency tracking. -*- Autoconf -*-
++
++# Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++#serial 2
++
++# _AM_OUTPUT_DEPENDENCY_COMMANDS
++# ------------------------------
++AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
++[for mf in $CONFIG_FILES; do
++ # Strip MF so we end up with the name of the file.
++ mf=`echo "$mf" | sed -e 's/:.*$//'`
++ if (sed 1q $mf | fgrep 'generated by automake') > /dev/null 2>&1; then
++ dirpart=`AS_DIRNAME("$mf")`
++ else
++ continue
++ fi
++ grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
++ # Extract the definition of DEP_FILES from the Makefile without
++ # running `make'.
++ DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
++ test -z "$DEPDIR" && continue
++ # When using ansi2knr, U may be empty or an underscore; expand it
++ U=`sed -n -e '/^U = / s///p' < "$mf"`
++ test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
++ # We invoke sed twice because it is the simplest approach to
++ # changing $(DEPDIR) to its actual value in the expansion.
++ for file in `sed -n -e '
++ /^DEP_FILES = .*\\\\$/ {
++ s/^DEP_FILES = //
++ :loop
++ s/\\\\$//
++ p
++ n
++ /\\\\$/ b loop
++ p
++ }
++ /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
++ # Make sure the directory exists.
++ test -f "$dirpart/$file" && continue
++ fdir=`AS_DIRNAME(["$file"])`
++ AS_MKDIR_P([$dirpart/$fdir])
++ # echo "creating $dirpart/$file"
++ echo '# dummy' > "$dirpart/$file"
++ done
++done
++])# _AM_OUTPUT_DEPENDENCY_COMMANDS
++
++
++# AM_OUTPUT_DEPENDENCY_COMMANDS
++# -----------------------------
++# This macro should only be invoked once -- use via AC_REQUIRE.
++#
++# This code is only required when automatic dependency tracking
++# is enabled. FIXME. This creates each `.P' file that we will
++# need in order to bootstrap the dependency handling code.
++AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
++[AC_CONFIG_COMMANDS([depfiles],
++ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
++ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
++])
++
++# Copyright 2001 Free Software Foundation, Inc. -*- Autoconf -*-
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 2
++
++# AM_MAKE_INCLUDE()
++# -----------------
++# Check to see how make treats includes.
++AC_DEFUN([AM_MAKE_INCLUDE],
++[am_make=${MAKE-make}
++cat > confinc << 'END'
++doit:
++ @echo done
++END
++# If we don't find an include directive, just comment out the code.
++AC_MSG_CHECKING([for style of include used by $am_make])
++am__include="#"
++am__quote=
++_am_result=none
++# First try GNU make style include.
++echo "include confinc" > confmf
++# We grep out `Entering directory' and `Leaving directory'
++# messages which can occur if `w' ends up in MAKEFLAGS.
++# In particular we don't look at `^make:' because GNU make might
++# be invoked under some other name (usually "gmake"), in which
++# case it prints its new name instead of `make'.
++if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
++ am__include=include
++ am__quote=
++ _am_result=GNU
++fi
++# Now try BSD make style include.
++if test "$am__include" = "#"; then
++ echo '.include "confinc"' > confmf
++ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
++ am__include=.include
++ am__quote="\""
++ _am_result=BSD
++ fi
++fi
++AC_SUBST(am__include)
++AC_SUBST(am__quote)
++AC_MSG_RESULT($_am_result)
++rm -f confinc confmf
++])
++
++# AM_CONDITIONAL -*- Autoconf -*-
++
++# Copyright 1997, 2000, 2001 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 5
++
++AC_PREREQ(2.52)
++
++# AM_CONDITIONAL(NAME, SHELL-CONDITION)
++# -------------------------------------
++# Define a conditional.
++AC_DEFUN([AM_CONDITIONAL],
++[ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
++ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
++AC_SUBST([$1_TRUE])
++AC_SUBST([$1_FALSE])
++if $2; then
++ $1_TRUE=
++ $1_FALSE='#'
++else
++ $1_TRUE='#'
++ $1_FALSE=
++fi
++AC_CONFIG_COMMANDS_PRE(
++[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
++ AC_MSG_ERROR([conditional \"$1\" was never defined.
++Usually this means the macro was only invoked conditionally.])
++fi])])
+
+diff -ruNa fribidi.old/config.h.in fribidi/config.h.in
+--- fribidi.old/config.h.in Mon Apr 8 19:50:08 2002
++++ fribidi/config.h.in Sun Nov 2 00:51:33 2003
+@@ -1,8 +1,5 @@
+ /* config.h.in. Generated automatically from configure.in by autoheader. */
+
+-/* Define if you have the ANSI C header files. */
+-#undef STDC_HEADERS
+-
+ #undef DEBUG
+
+ #undef MEM_OPTIMIZED
+@@ -23,21 +20,50 @@
+ /* We should #undef this symbol, to make autoheader shut up */
+ #undef HAS_FRIBIDI_TAB_CHAR_TYPE__I
+
+-/* The number of bytes in a char. */
+-#undef SIZEOF_CHAR
++/* Define if you have the <dlfcn.h> header file. */
++#undef HAVE_DLFCN_H
+
+-/* The number of bytes in a char*. */
+-#undef SIZEOF_CHARP
++/* Define if you have the <inttypes.h> header file. */
++#undef HAVE_INTTYPES_H
+
+-/* The number of bytes in a int. */
+-#undef SIZEOF_INT
++/* Define if you have the <memory.h> header file. */
++#undef HAVE_MEMORY_H
+
+-/* Define if you have the <dlfcn.h> header file. */
+-#undef HAVE_DLFCN_H
++/* Define if you have the <stdint.h> header file. */
++#undef HAVE_STDINT_H
++
++/* Define if you have the <stdlib.h> header file. */
++#undef HAVE_STDLIB_H
++
++/* Define if you have the <strings.h> header file. */
++#undef HAVE_STRINGS_H
++
++/* Define if you have the <string.h> header file. */
++#undef HAVE_STRING_H
++
++/* Define if you have the <sys/stat.h> header file. */
++#undef HAVE_SYS_STAT_H
++
++/* Define if you have the <sys/types.h> header file. */
++#undef HAVE_SYS_TYPES_H
++
++/* Define if you have the <unistd.h> header file. */
++#undef HAVE_UNISTD_H
+
+ /* Name of package */
+ #undef PACKAGE
+
++/* The size of a `char', as computed by sizeof. */
++#undef SIZEOF_CHAR
++
++/* The size of a `char*', as computed by sizeof. */
++#undef SIZEOF_CHARP
++
++/* The size of a `int', as computed by sizeof. */
++#undef SIZEOF_INT
++
++/* Define if you have the ANSI C header files. */
++#undef STDC_HEADERS
++
+ /* Version number of package */
+ #undef VERSION
+-
+diff -ruNa fribidi.old/configure fribidi/configure
+--- fribidi.old/configure Sun May 19 12:06:53 2002
++++ fribidi/configure Sun Nov 2 00:51:42 2003
+@@ -1,25 +1,12 @@
+ #! /bin/sh
+-
+ # Guess values for system-dependent variables and create Makefiles.
+-# Generated automatically using autoconf version 2.13
+-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
++# Generated by Autoconf 2.52.
+ #
++# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
++# Free Software Foundation, Inc.
+ # This configure script is free software; the Free Software Foundation
+ # gives unlimited permission to copy, distribute and modify it.
+
+-# Defaults:
+-ac_help=
+-ac_default_prefix=/usr/local
+-# Any additions from configure.in:
+-ac_help="$ac_help
+- --enable-shared[=PKGS] build shared libraries [default=yes]"
+-ac_help="$ac_help
+- --enable-static[=PKGS] build static libraries [default=yes]"
+-ac_help="$ac_help
+- --enable-fast-install[=PKGS] optimize for fast installation [default=yes]"
+-ac_help="$ac_help
+- --with-gnu-ld assume the C compiler uses GNU ld [default=no]"
+-
+ # Find the correct PATH separator. Usually this is `:', but
+ # DJGPP uses `;' like DOS.
+ if test "X${PATH_SEPARATOR+set}" != Xset; then
+@@ -30,7 +17,6 @@
+ esac
+ fi
+
+-
+ # Check that we are running under the correct shell.
+ SHELL=${CONFIG_SHELL-/bin/sh}
+
+@@ -176,30 +162,149 @@
+ ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+ fi
+
++# Avoid depending upon Character Ranges.
++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
++as_cr_digits='0123456789'
++as_cr_alnum=$as_cr_Letters$as_cr_digits
++
++# Sed expression to map a string onto a valid variable name.
++as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
++
++# Sed expression to map a string onto a valid CPP name.
++as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
++
++# Be Bourne compatible
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
++ emulate sh
++ NULLCMD=:
++elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
++ set -o posix
++fi
++
++# Name of the executable.
++as_me=`echo "$0" |sed 's,.*[\\/],,'`
++
++if expr a : '\(a\)' >/dev/null 2>&1; then
++ as_expr=expr
++else
++ as_expr=false
++fi
++
++rm -f conf$$ conf$$.exe conf$$.file
++echo >conf$$.file
++if ln -s conf$$.file conf$$ 2>/dev/null; then
++ # We could just check for DJGPP; but this test a) works b) is more generic
++ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
++ if test -f conf$$.exe; then
++ # Don't use ln at all; we don't have any links
++ as_ln_s='cp -p'
++ else
++ as_ln_s='ln -s'
++ fi
++elif ln conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s=ln
++else
++ as_ln_s='cp -p'
++fi
++rm -f conf$$ conf$$.exe conf$$.file
++
++as_executable_p="test -f"
+
+-ac_help="$ac_help
+- --disable-libtool-lock avoid locking (might break parallel builds)"
+-ac_help="$ac_help
+- --with-pic try to use only PIC/non-PIC objects [default=use both]"
+-ac_help="$ac_help
+- --enable-debug turn debugging information on [default=no]"
+-ac_help="$ac_help
+- --enable-malloc do not allocate chunks of memory [default=no]"
+-ac_help="$ac_help
+- --enable-memopt optimize for memory usage [default=no]"
+-ac_help="$ac_help
+- --without-charsets exclude character set converters from library
+- causes command-line tool to use iconv"
++# Support unset when possible.
++if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
++ as_unset=unset
++else
++ as_unset=false
++fi
++
++# NLS nuisances.
++$as_unset LANG || test "${LANG+set}" != set || { LANG=C; export LANG; }
++$as_unset LC_ALL || test "${LC_ALL+set}" != set || { LC_ALL=C; export LC_ALL; }
++$as_unset LC_TIME || test "${LC_TIME+set}" != set || { LC_TIME=C; export LC_TIME; }
++$as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set || { LC_CTYPE=C; export LC_CTYPE; }
++$as_unset LANGUAGE || test "${LANGUAGE+set}" != set || { LANGUAGE=C; export LANGUAGE; }
++$as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set || { LC_COLLATE=C; export LC_COLLATE; }
++$as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set || { LC_NUMERIC=C; export LC_NUMERIC; }
++$as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set || { LC_MESSAGES=C; export LC_MESSAGES; }
++
++# IFS
++# We need space, tab and new line, in precisely that order.
++as_nl='
++'
++IFS=" $as_nl"
++
++# CDPATH.
++$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=:; export CDPATH; }
++
++# Name of the host.
++# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
++# so uname gets run too.
++ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
++
++exec 6>&1
++
++#
++# Initializations.
++#
++ac_default_prefix=/usr/local
++cross_compiling=no
++subdirs=
++MFLAGS= MAKEFLAGS=
++SHELL=${CONFIG_SHELL-/bin/sh}
++
++# Maximum number of lines to put in a shell here document.
++# This variable seems obsolete. It should probably be removed, and
++# only ac_max_sed_lines should be used.
++: ${ac_max_here_lines=38}
++
++ac_unique_file="fribidi.c"
++# Factoring default headers for most tests.
++ac_includes_default="\
++#include <stdio.h>
++#if HAVE_SYS_TYPES_H
++# include <sys/types.h>
++#endif
++#if HAVE_SYS_STAT_H
++# include <sys/stat.h>
++#endif
++#if STDC_HEADERS
++# include <stdlib.h>
++# include <stddef.h>
++#else
++# if HAVE_STDLIB_H
++# include <stdlib.h>
++# endif
++#endif
++#if HAVE_STRING_H
++# if !STDC_HEADERS && HAVE_MEMORY_H
++# include <memory.h>
++# endif
++# include <string.h>
++#endif
++#if HAVE_STRINGS_H
++# include <strings.h>
++#endif
++#if HAVE_INTTYPES_H
++# include <inttypes.h>
++#else
++# if HAVE_STDINT_H
++# include <stdint.h>
++# endif
++#endif
++#if HAVE_UNISTD_H
++# include <unistd.h>
++#endif"
+
+ # Initialize some variables set by options.
++ac_init_help=
++ac_init_version=false
+ # The variables have the same names as the options, with
+ # dashes changed to underlines.
+-build=NONE
+-cache_file=./config.cache
++cache_file=/dev/null
+ exec_prefix=NONE
+-host=NONE
+ no_create=
+-nonopt=NONE
+ no_recursion=
+ prefix=NONE
+ program_prefix=NONE
+@@ -208,10 +313,15 @@
+ silent=
+ site=
+ srcdir=
+-target=NONE
+ verbose=
+ x_includes=NONE
+ x_libraries=NONE
++
++# Installation directory options.
++# These are left unexpanded so users can "make install exec_prefix=/foo"
++# and all the variables that are supposed to be based on exec_prefix
++# by default will actually change.
++# Use braces instead of parens because sh, perl, etc. also accept them.
+ bindir='${exec_prefix}/bin'
+ sbindir='${exec_prefix}/sbin'
+ libexecdir='${exec_prefix}/libexec'
+@@ -225,17 +335,16 @@
+ infodir='${prefix}/info'
+ mandir='${prefix}/man'
+
+-# Initialize some other variables.
+-subdirs=
+-MFLAGS= MAKEFLAGS=
+-SHELL=${CONFIG_SHELL-/bin/sh}
+-# Maximum number of lines to put in a shell here document.
+-ac_max_here_lines=12
++# Identity of this package.
++PACKAGE_NAME=
++PACKAGE_TARNAME=
++PACKAGE_VERSION=
++PACKAGE_STRING=
++PACKAGE_BUGREPORT=
+
+ ac_prev=
+ for ac_option
+ do
+-
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval "$ac_prev=\$ac_option"
+@@ -243,59 +352,59 @@
+ continue
+ fi
+
+- case "$ac_option" in
+- -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+- *) ac_optarg= ;;
+- esac
++ ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+- case "$ac_option" in
++ case $ac_option in
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+- bindir="$ac_optarg" ;;
++ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+- ac_prev=build ;;
++ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+- build="$ac_optarg" ;;
++ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+- cache_file="$ac_optarg" ;;
++ cache_file=$ac_optarg ;;
++
++ --config-cache | -C)
++ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+ | --da=*)
+- datadir="$ac_optarg" ;;
++ datadir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+- ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
++ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+- if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+- fi
+- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+- eval "enable_${ac_feature}=no" ;;
++ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
++ { (exit 1); exit 1; }; }
++ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
++ eval "enable_$ac_feature=no" ;;
+
+ -enable-* | --enable-*)
+- ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
++ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+- if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+- fi
+- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+- case "$ac_option" in
+- *=*) ;;
++ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
++ { (exit 1); exit 1; }; }
++ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
++ case $ac_option in
++ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) ac_optarg=yes ;;
+ esac
+- eval "enable_${ac_feature}='$ac_optarg'" ;;
++ eval "enable_$ac_feature='$ac_optarg'" ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+@@ -304,95 +413,47 @@
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+- exec_prefix="$ac_optarg" ;;
++ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+- -help | --help | --hel | --he)
+- # Omit some internal or obsolete options to make the list less imposing.
+- # This message is too long to be a string in the A/UX 3.1 sh.
+- cat << EOF
+-Usage: configure [options] [host]
+-Options: [defaults in brackets after descriptions]
+-Configuration:
+- --cache-file=FILE cache test results in FILE
+- --help print this message
+- --no-create do not create output files
+- --quiet, --silent do not print \`checking...' messages
+- --version print the version of autoconf that created configure
+-Directory and file names:
+- --prefix=PREFIX install architecture-independent files in PREFIX
+- [$ac_default_prefix]
+- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+- [same as prefix]
+- --bindir=DIR user executables in DIR [EPREFIX/bin]
+- --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
+- --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
+- --datadir=DIR read-only architecture-independent data in DIR
+- [PREFIX/share]
+- --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
+- --sharedstatedir=DIR modifiable architecture-independent data in DIR
+- [PREFIX/com]
+- --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
+- --libdir=DIR object code libraries in DIR [EPREFIX/lib]
+- --includedir=DIR C header files in DIR [PREFIX/include]
+- --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
+- --infodir=DIR info documentation in DIR [PREFIX/info]
+- --mandir=DIR man documentation in DIR [PREFIX/man]
+- --srcdir=DIR find the sources in DIR [configure dir or ..]
+- --program-prefix=PREFIX prepend PREFIX to installed program names
+- --program-suffix=SUFFIX append SUFFIX to installed program names
+- --program-transform-name=PROGRAM
+- run sed PROGRAM on installed program names
+-EOF
+- cat << EOF
+-Host type:
+- --build=BUILD configure for building on BUILD [BUILD=HOST]
+- --host=HOST configure for HOST [guessed]
+- --target=TARGET configure for TARGET [TARGET=HOST]
+-Features and packages:
+- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+- --x-includes=DIR X include files are in DIR
+- --x-libraries=DIR X library files are in DIR
+-EOF
+- if test -n "$ac_help"; then
+- echo "--enable and --with options recognized:$ac_help"
+- fi
+- exit 0 ;;
++ -help | --help | --hel | --he | -h)
++ ac_init_help=long ;;
++ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
++ ac_init_help=recursive ;;
++ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
++ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+- ac_prev=host ;;
++ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+- host="$ac_optarg" ;;
++ host_alias=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+- includedir="$ac_optarg" ;;
++ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+- infodir="$ac_optarg" ;;
++ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+- libdir="$ac_optarg" ;;
++ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+- libexecdir="$ac_optarg" ;;
++ libexecdir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst \
+@@ -401,12 +462,12 @@
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+- localstatedir="$ac_optarg" ;;
++ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+- mandir="$ac_optarg" ;;
++ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+@@ -427,26 +488,26 @@
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+- oldincludedir="$ac_optarg" ;;
++ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+- prefix="$ac_optarg" ;;
++ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+- program_prefix="$ac_optarg" ;;
++ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+- program_suffix="$ac_optarg" ;;
++ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+@@ -463,7 +524,7 @@
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+- program_transform_name="$ac_optarg" ;;
++ program_transform_name=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+@@ -473,7 +534,7 @@
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+- sbindir="$ac_optarg" ;;
++ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+@@ -484,58 +545,57 @@
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+- sharedstatedir="$ac_optarg" ;;
++ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+- site="$ac_optarg" ;;
++ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+- srcdir="$ac_optarg" ;;
++ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+- sysconfdir="$ac_optarg" ;;
++ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+- ac_prev=target ;;
++ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+- target="$ac_optarg" ;;
++ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+- -version | --version | --versio | --versi | --vers)
+- echo "configure generated by autoconf version 2.13"
+- exit 0 ;;
++ -version | --version | --versio | --versi | --vers | -V)
++ ac_init_version=: ;;
+
+ -with-* | --with-*)
+- ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
++ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+- if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+- fi
++ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
++ { echo "$as_me: error: invalid package name: $ac_package" >&2
++ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+- case "$ac_option" in
+- *=*) ;;
++ case $ac_option in
++ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) ac_optarg=yes ;;
+ esac
+- eval "with_${ac_package}='$ac_optarg'" ;;
++ eval "with_$ac_package='$ac_optarg'" ;;
+
+ -without-* | --without-*)
+- ac_package=`echo $ac_option|sed -e 's/-*without-//'`
++ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+- if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+- fi
+- ac_package=`echo $ac_package| sed 's/-/_/g'`
+- eval "with_${ac_package}=no" ;;
++ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
++ { echo "$as_me: error: invalid package name: $ac_package" >&2
++ { (exit 1); exit 1; }; }
++ ac_package=`echo $ac_package | sed 's/-/_/g'`
++ eval "with_$ac_package=no" ;;
+
+ --x)
+ # Obsolete; use --with-x.
+@@ -546,98 +606,98 @@
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+- x_includes="$ac_optarg" ;;
++ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+- x_libraries="$ac_optarg" ;;
++ x_libraries=$ac_optarg ;;
+
+- -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
++ -*) { echo "$as_me: error: unrecognized option: $ac_option
++Try \`$0 --help' for more information." >&2
++ { (exit 1); exit 1; }; }
+ ;;
+
++ *=*)
++ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
++ # Reject names that are not valid shell variable names.
++ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
++ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
++ { (exit 1); exit 1; }; }
++ ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
++ eval "$ac_envvar='$ac_optarg'"
++ export $ac_envvar ;;
++
+ *)
+- if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+- echo "configure: warning: $ac_option: invalid host type" 1>&2
+- fi
+- if test "x$nonopt" != xNONE; then
+- { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+- fi
+- nonopt="$ac_option"
++ # FIXME: should be removed in autoconf 3.0.
++ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
++ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
++ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
++ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+ esac
+ done
+
+ if test -n "$ac_prev"; then
+- { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+-fi
+-
+-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+-
+-# File descriptor usage:
+-# 0 standard input
+-# 1 file creation
+-# 2 errors and warnings
+-# 3 some systems may open it to /dev/tty
+-# 4 used on the Kubota Titan
+-# 6 checking for... messages and results
+-# 5 compiler messages saved in config.log
+-if test "$silent" = yes; then
+- exec 6>/dev/null
+-else
+- exec 6>&1
++ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
++ { echo "$as_me: error: missing argument to $ac_option" >&2
++ { (exit 1); exit 1; }; }
+ fi
+-exec 5>./config.log
+
+-echo "\
+-This file contains any messages produced by compilers while
+-running configure, to aid debugging if configure makes a mistake.
+-" 1>&5
++# Be sure to have absolute paths.
++for ac_var in exec_prefix prefix
++do
++ eval ac_val=$`echo $ac_var`
++ case $ac_val in
++ [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
++ *) { echo "$as_me: error: expected an absolute path for --$ac_var: $ac_val" >&2
++ { (exit 1); exit 1; }; };;
++ esac
++done
+
+-# Strip out --no-create and --no-recursion so they do not pile up.
+-# Also quote any args containing shell metacharacters.
+-ac_configure_args=
+-for ac_arg
++# Be sure to have absolute paths.
++for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
++ localstatedir libdir includedir oldincludedir infodir mandir
+ do
+- case "$ac_arg" in
+- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+- | --no-cr | --no-c) ;;
+- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+- ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+- *) ac_configure_args="$ac_configure_args $ac_arg" ;;
++ eval ac_val=$`echo $ac_var`
++ case $ac_val in
++ [\\/$]* | ?:[\\/]* ) ;;
++ *) { echo "$as_me: error: expected an absolute path for --$ac_var: $ac_val" >&2
++ { (exit 1); exit 1; }; };;
+ esac
+ done
+
+-# NLS nuisances.
+-# Only set these to C if already set. These must not be set unconditionally
+-# because not all systems understand e.g. LANG=C (notably SCO).
+-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+-# Non-C LC_CTYPE values break the ctype check.
+-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
++# There might be people who depend on the old broken behavior: `$host'
++# used to hold the argument of --host etc.
++build=$build_alias
++host=$host_alias
++target=$target_alias
++
++# FIXME: should be removed in autoconf 3.0.
++if test "x$host_alias" != x; then
++ if test "x$build_alias" = x; then
++ cross_compiling=maybe
++ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
++ If a cross compiler is detected then cross compile mode will be used." >&2
++ elif test "x$build_alias" != "x$host_alias"; then
++ cross_compiling=yes
++ fi
++fi
+
+-# confdefs.h avoids OS command line length limits that DEFS can exceed.
+-rm -rf conftest* confdefs.h
+-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+-echo > confdefs.h
++ac_tool_prefix=
++test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+-# A filename unique to this package, relative to the directory that
+-# configure is in, which we can look for to find out if srcdir is correct.
+-ac_unique_file=fribidi.c
++test "$silent" = yes && exec 6>/dev/null
+
+ # Find the source files, if location was not specified.
+ if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then its parent.
+ ac_prog=$0
+- ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
++ ac_confdir=`echo "$ac_prog" | sed 's%[\\/][^\\/][^\\/]*$%%'`
+ test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+ srcdir=$ac_confdir
+ if test ! -r $srcdir/$ac_unique_file; then
+@@ -648,13 +708,325 @@
+ fi
+ if test ! -r $srcdir/$ac_unique_file; then
+ if test "$ac_srcdir_defaulted" = yes; then
+- { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
++ { echo "$as_me: error: cannot find sources in $ac_confdir or .." >&2
++ { (exit 1); exit 1; }; }
+ else
+- { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
++ { echo "$as_me: error: cannot find sources in $srcdir" >&2
++ { (exit 1); exit 1; }; }
+ fi
+ fi
+-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
++srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
++ac_env_build_alias_set=${build_alias+set}
++ac_env_build_alias_value=$build_alias
++ac_cv_env_build_alias_set=${build_alias+set}
++ac_cv_env_build_alias_value=$build_alias
++ac_env_host_alias_set=${host_alias+set}
++ac_env_host_alias_value=$host_alias
++ac_cv_env_host_alias_set=${host_alias+set}
++ac_cv_env_host_alias_value=$host_alias
++ac_env_target_alias_set=${target_alias+set}
++ac_env_target_alias_value=$target_alias
++ac_cv_env_target_alias_set=${target_alias+set}
++ac_cv_env_target_alias_value=$target_alias
++ac_env_CC_set=${CC+set}
++ac_env_CC_value=$CC
++ac_cv_env_CC_set=${CC+set}
++ac_cv_env_CC_value=$CC
++ac_env_CFLAGS_set=${CFLAGS+set}
++ac_env_CFLAGS_value=$CFLAGS
++ac_cv_env_CFLAGS_set=${CFLAGS+set}
++ac_cv_env_CFLAGS_value=$CFLAGS
++ac_env_LDFLAGS_set=${LDFLAGS+set}
++ac_env_LDFLAGS_value=$LDFLAGS
++ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
++ac_cv_env_LDFLAGS_value=$LDFLAGS
++ac_env_CPPFLAGS_set=${CPPFLAGS+set}
++ac_env_CPPFLAGS_value=$CPPFLAGS
++ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
++ac_cv_env_CPPFLAGS_value=$CPPFLAGS
++ac_env_CPP_set=${CPP+set}
++ac_env_CPP_value=$CPP
++ac_cv_env_CPP_set=${CPP+set}
++ac_cv_env_CPP_value=$CPP
++
++#
++# Report the --help message.
++#
++if test "$ac_init_help" = "long"; then
++ # Omit some internal or obsolete options to make the list less imposing.
++ # This message is too long to be a string in the A/UX 3.1 sh.
++ cat <<EOF
++\`configure' configures this package to adapt to many kinds of systems.
++
++Usage: $0 [OPTION]... [VAR=VALUE]...
++
++To assign environment variables (e.g., CC, CFLAGS...), specify them as
++VAR=VALUE. See below for descriptions of some of the useful variables.
++
++Defaults for the options are specified in brackets.
++
++Configuration:
++ -h, --help display this help and exit
++ --help=short display options specific to this package
++ --help=recursive display the short help of all the included packages
++ -V, --version display version information and exit
++ -q, --quiet, --silent do not print \`checking...' messages
++ --cache-file=FILE cache test results in FILE [disabled]
++ -C, --config-cache alias for \`--cache-file=config.cache'
++ -n, --no-create do not create output files
++ --srcdir=DIR find the sources in DIR [configure dir or \`..']
++
++EOF
++
++ cat <<EOF
++Installation directories:
++ --prefix=PREFIX install architecture-independent files in PREFIX
++ [$ac_default_prefix]
++ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
++ [PREFIX]
++
++By default, \`make install' will install all the files in
++\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
++an installation prefix other than \`$ac_default_prefix' using \`--prefix',
++for instance \`--prefix=\$HOME'.
++
++For better control, use the options below.
++
++Fine tuning of the installation directories:
++ --bindir=DIR user executables [EPREFIX/bin]
++ --sbindir=DIR system admin executables [EPREFIX/sbin]
++ --libexecdir=DIR program executables [EPREFIX/libexec]
++ --datadir=DIR read-only architecture-independent data [PREFIX/share]
++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
++ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
++ --libdir=DIR object code libraries [EPREFIX/lib]
++ --includedir=DIR C header files [PREFIX/include]
++ --oldincludedir=DIR C header files for non-gcc [/usr/include]
++ --infodir=DIR info documentation [PREFIX/info]
++ --mandir=DIR man documentation [PREFIX/man]
++EOF
++
++ cat <<\EOF
++
++Program names:
++ --program-prefix=PREFIX prepend PREFIX to installed program names
++ --program-suffix=SUFFIX append SUFFIX to installed program names
++ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
++
++System types:
++ --build=BUILD configure for building on BUILD [guessed]
++ --host=HOST build programs to run on HOST [BUILD]
++EOF
++fi
++
++if test -n "$ac_init_help"; then
++
++ cat <<\EOF
++
++Optional Features:
++ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
++ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
++ --disable-dependency-tracking Speeds up one-time builds
++ --enable-dependency-tracking Do not reject slow dependency extractors
++ --enable-shared=PKGS build shared libraries default=yes
++ --enable-static=PKGS build static libraries default=yes
++ --enable-fast-install=PKGS optimize for fast installation default=yes
++ --disable-libtool-lock avoid locking (might break parallel builds)
++ --enable-debug turn debugging information on default=no
++ --enable-malloc do not allocate chunks of memory default=no
++ --enable-memopt optimize for memory usage default=no
++
++Optional Packages:
++ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
++ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
++ --with-gnu-ld assume the C compiler uses GNU ld default=no
++ --with-pic try to use only PIC/non-PIC objects default=use both
++ --without-charsets exclude character set converters from library
++ causes command-line tool to use iconv
++
++Some influential environment variables:
++ CC C compiler command
++ CFLAGS C compiler flags
++ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
++ nonstandard directory <lib dir>
++ CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
++ headers in a nonstandard directory <include dir>
++ CPP C preprocessor
++
++Use these variables to override the choices made by `configure' or to help
++it to find libraries and programs with nonstandard names/locations.
++
++EOF
++fi
++
++if test "$ac_init_help" = "recursive"; then
++ # If there are subdirs, report their specific --help.
++ ac_popdir=`pwd`
++ for ac_subdir in : $ac_subdirs_all; do test "x$ac_subdir" = x: && continue
++ cd $ac_subdir
++ # A "../" for each directory in /$ac_subdir.
++ ac_dots=`echo $ac_subdir |
++ sed 's,^\./,,;s,[^/]$,&/,;s,[^/]*/,../,g'`
++
++ case $srcdir in
++ .) # No --srcdir option. We are building in place.
++ ac_sub_srcdir=$srcdir ;;
++ [\\/]* | ?:[\\/]* ) # Absolute path.
++ ac_sub_srcdir=$srcdir/$ac_subdir ;;
++ *) # Relative path.
++ ac_sub_srcdir=$ac_dots$srcdir/$ac_subdir ;;
++ esac
++
++ # Check for guested configure; otherwise get Cygnus style configure.
++ if test -f $ac_sub_srcdir/configure.gnu; then
++ echo
++ $SHELL $ac_sub_srcdir/configure.gnu --help=recursive
++ elif test -f $ac_sub_srcdir/configure; then
++ echo
++ $SHELL $ac_sub_srcdir/configure --help=recursive
++ elif test -f $ac_sub_srcdir/configure.ac ||
++ test -f $ac_sub_srcdir/configure.in; then
++ echo
++ $ac_configure --help
++ else
++ echo "$as_me: WARNING: no configuration information is in $ac_subdir" >&2
++ fi
++ cd $ac_popdir
++ done
++fi
++
++test -n "$ac_init_help" && exit 0
++if $ac_init_version; then
++ cat <<\EOF
++
++Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
++Free Software Foundation, Inc.
++This configure script is free software; the Free Software Foundation
++gives unlimited permission to copy, distribute and modify it.
++EOF
++ exit 0
++fi
++exec 5>config.log
++cat >&5 <<EOF
++This file contains any messages produced by compilers while
++running configure, to aid debugging if configure makes a mistake.
++
++It was created by $as_me, which was
++generated by GNU Autoconf 2.52. Invocation command line was
++
++ $ $0 $@
++
++EOF
++{
++cat <<_ASUNAME
++## ---------- ##
++## Platform. ##
++## ---------- ##
++
++hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
++uname -m = `(uname -m) 2>/dev/null || echo unknown`
++uname -r = `(uname -r) 2>/dev/null || echo unknown`
++uname -s = `(uname -s) 2>/dev/null || echo unknown`
++uname -v = `(uname -v) 2>/dev/null || echo unknown`
++
++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
++/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
++
++/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
++hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
++/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
++/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
++
++PATH = $PATH
++
++_ASUNAME
++} >&5
++
++cat >&5 <<EOF
++## ------------ ##
++## Core tests. ##
++## ------------ ##
++
++EOF
++
++# Keep a trace of the command line.
++# Strip out --no-create and --no-recursion so they do not pile up.
++# Also quote any args containing shell meta-characters.
++ac_configure_args=
++ac_sep=
++for ac_arg
++do
++ case $ac_arg in
++ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
++ | --no-cr | --no-c) ;;
++ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
++ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
++ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
++ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"`
++ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
++ ac_sep=" " ;;
++ *) ac_configure_args="$ac_configure_args$ac_sep$ac_arg"
++ ac_sep=" " ;;
++ esac
++ # Get rid of the leading space.
++done
++
++# When interrupted or exit'd, cleanup temporary files, and complete
++# config.log. We remove comments because anyway the quotes in there
++# would cause problems or look ugly.
++trap 'exit_status=$?
++ # Save into config.log some information that might help in debugging.
++ echo >&5
++ echo "## ----------------- ##" >&5
++ echo "## Cache variables. ##" >&5
++ echo "## ----------------- ##" >&5
++ echo >&5
++ # The following way of writing the cache mishandles newlines in values,
++{
++ (set) 2>&1 |
++ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
++ *ac_space=\ *)
++ sed -n \
++ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
++ ;;
++ *)
++ sed -n \
++ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
++ ;;
++ esac;
++} >&5
++ sed "/^$/d" confdefs.h >conftest.log
++ if test -s conftest.log; then
++ echo >&5
++ echo "## ------------ ##" >&5
++ echo "## confdefs.h. ##" >&5
++ echo "## ------------ ##" >&5
++ echo >&5
++ cat conftest.log >&5
++ fi
++ (echo; echo) >&5
++ test "$ac_signal" != 0 &&
++ echo "$as_me: caught signal $ac_signal" >&5
++ echo "$as_me: exit $exit_status" >&5
++ rm -rf conftest* confdefs* core core.* *.core conf$$* $ac_clean_files &&
++ exit $exit_status
++ ' 0
++for ac_signal in 1 2 13 15; do
++ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
++done
++ac_signal=0
+
++# confdefs.h avoids OS command line length limits that DEFS can exceed.
++rm -rf conftest* confdefs.h
++# AIX cpp loses on an empty file, so make sure it contains at least a newline.
++echo >confdefs.h
++
++# Let the site file select an alternate cache file if it wants to.
+ # Prefer explicitly selected file to automatically selected ones.
+ if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+@@ -665,41 +1037,107 @@
+ fi
+ for ac_site_file in $CONFIG_SITE; do
+ if test -r "$ac_site_file"; then
+- echo "loading site script $ac_site_file"
++ { echo "$as_me:1040: loading site script $ac_site_file" >&5
++echo "$as_me: loading site script $ac_site_file" >&6;}
++ cat "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+ done
+
+ if test -r "$cache_file"; then
+- echo "loading cache $cache_file"
+- . $cache_file
++ # Some versions of bash will fail to source /dev/null (special
++ # files actually), so we avoid doing that.
++ if test -f "$cache_file"; then
++ { echo "$as_me:1051: loading cache $cache_file" >&5
++echo "$as_me: loading cache $cache_file" >&6;}
++ case $cache_file in
++ [\\/]* | ?:[\\/]* ) . $cache_file;;
++ *) . ./$cache_file;;
++ esac
++ fi
+ else
+- echo "creating cache $cache_file"
+- > $cache_file
++ { echo "$as_me:1059: creating cache $cache_file" >&5
++echo "$as_me: creating cache $cache_file" >&6;}
++ >$cache_file
++fi
++
++# Check that the precious variables saved in the cache have kept the same
++# value.
++ac_cache_corrupted=false
++for ac_var in `(set) 2>&1 |
++ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
++ eval ac_old_set=\$ac_cv_env_${ac_var}_set
++ eval ac_new_set=\$ac_env_${ac_var}_set
++ eval ac_old_val="\$ac_cv_env_${ac_var}_value"
++ eval ac_new_val="\$ac_env_${ac_var}_value"
++ case $ac_old_set,$ac_new_set in
++ set,)
++ { echo "$as_me:1075: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
++echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
++ ac_cache_corrupted=: ;;
++ ,set)
++ { echo "$as_me:1079: error: \`$ac_var' was not set in the previous run" >&5
++echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
++ ac_cache_corrupted=: ;;
++ ,);;
++ *)
++ if test "x$ac_old_val" != "x$ac_new_val"; then
++ { echo "$as_me:1085: error: \`$ac_var' has changed since the previous run:" >&5
++echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
++ { echo "$as_me:1087: former value: $ac_old_val" >&5
++echo "$as_me: former value: $ac_old_val" >&2;}
++ { echo "$as_me:1089: current value: $ac_new_val" >&5
++echo "$as_me: current value: $ac_new_val" >&2;}
++ ac_cache_corrupted=:
++ fi;;
++ esac
++ # Pass precious variables to config.status. It doesn't matter if
++ # we pass some twice (in addition to the command line arguments).
++ if test "$ac_new_set" = set; then
++ case $ac_new_val in
++ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
++ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"`
++ ac_configure_args="$ac_configure_args '$ac_arg'"
++ ;;
++ *) ac_configure_args="$ac_configure_args $ac_var=$ac_new_val"
++ ;;
++ esac
++ fi
++done
++if $ac_cache_corrupted; then
++ { echo "$as_me:1108: error: changes in the environment can compromise the build" >&5
++echo "$as_me: error: changes in the environment can compromise the build" >&2;}
++ { { echo "$as_me:1110: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
++echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
++ { (exit 1); exit 1; }; }
+ fi
+
+ ac_ext=c
+-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+-cross_compiling=$ac_cv_prog_cc_cross
+-
+-ac_exeext=
+-ac_objext=o
+-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+- # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+- ac_n= ac_c='
+-' ac_t=' '
+- else
+- ac_n=-n ac_c= ac_t=
+- fi
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
++ *c*,-n*) ECHO_N= ECHO_C='
++' ECHO_T=' ' ;;
++ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
++ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
++esac
++echo "#! $SHELL" >conftest.sh
++echo "exit 0" >>conftest.sh
++chmod +x conftest.sh
++if { (echo "$as_me:1130: PATH=\".;.\"; conftest.sh") >&5
++ (PATH=".;."; conftest.sh) 2>&5
++ ac_status=$?
++ echo "$as_me:1133: \$? = $ac_status" >&5
++ (exit $ac_status); }; then
++ ac_path_separator=';'
+ else
+- ac_n= ac_c='\c' ac_t=
++ ac_path_separator=:
+ fi
+-
+-
++PATH_SEPARATOR="$ac_path_separator"
++rm -f conftest.sh
+
+ # Define different version variables.
+ #
+@@ -728,21 +1166,14 @@
+ FRIBIDI_RPM_RELEASE=0
+ FRIBIDI_VERSION=$FRIBIDI_MAJOR_VERSION.$FRIBIDI_MINOR_VERSION.$FRIBIDI_MICRO_VERSION
+
+-
+-
+-
+-
+-
+-
+-
+-
+-
+ PACKAGE=fribidi
+ VERSION=$FRIBIDI_VERSION
+
++# Add the stamp file to the list of files AC keeps track of,
++# along with our hook.
++ac_config_headers="$ac_config_headers config.h"
+
+-
+-
++am__api_version="1.6"
+ ac_aux_dir=
+ for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+@@ -753,14 +1184,20 @@
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
++ elif test -f $ac_dir/shtool; then
++ ac_aux_dir=$ac_dir
++ ac_install_sh="$ac_aux_dir/shtool install -c"
++ break
+ fi
+ done
+ if test -z "$ac_aux_dir"; then
+- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+-fi
+-ac_config_guess=$ac_aux_dir/config.guess
+-ac_config_sub=$ac_aux_dir/config.sub
+-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
++ { { echo "$as_me:1194: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
++echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
++ { (exit 1); exit 1; }; }
++fi
++ac_config_guess="$SHELL $ac_aux_dir/config.guess"
++ac_config_sub="$SHELL $ac_aux_dir/config.sub"
++ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+ # Find a good install program. We prefer a C program (faster),
+ # so one script is as good as another. But avoid the broken or
+@@ -769,31 +1206,39 @@
+ # SunOS /usr/etc/install
+ # IRIX /sbin/install
+ # AIX /bin/install
++# AmigaOS /C/install, which installs bootblocks on floppy discs
+ # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+ # AFS /usr/afsws/bin/install, which mishandles nonexistent args
+ # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+ # ./install, which can be erroneously created by make from ./install.sh.
+-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+-echo "configure:778: checking for a BSD compatible install" >&5
++echo "$as_me:1214: checking for a BSD compatible install" >&5
++echo $ECHO_N "checking for a BSD compatible install... $ECHO_C" >&6
+ if test -z "$INSTALL"; then
+-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++if test "${ac_cv_path_install+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
++ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ for ac_dir in $PATH; do
++ IFS=$ac_save_IFS
+ # Account for people who put trailing slashes in PATH elements.
+- case "$ac_dir/" in
+- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
++ case $ac_dir/ in
++ / | ./ | .// | /cC/* \
++ | /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* \
++ | /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+- if test -f $ac_dir/$ac_prog; then
++ if $as_executable_p "$ac_dir/$ac_prog"; then
+ if test $ac_prog = install &&
+- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
++ grep dspmsg "$ac_dir/$ac_prog" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
++ elif test $ac_prog = install &&
++ grep pwplus "$ac_dir/$ac_prog" >/dev/null 2>&1; then
++ # program-specific install script used by HP pwplus--don't use.
++ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+@@ -803,441 +1248,896 @@
+ ;;
+ esac
+ done
+- IFS="$ac_save_IFS"
+
+ fi
+ if test "${ac_cv_path_install+set}" = set; then
+- INSTALL="$ac_cv_path_install"
++ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+- INSTALL="$ac_install_sh"
++ INSTALL=$ac_install_sh
+ fi
+ fi
+-echo "$ac_t""$INSTALL" 1>&6
++echo "$as_me:1263: result: $INSTALL" >&5
++echo "${ECHO_T}$INSTALL" >&6
+
+ # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+ # It thinks the first close brace ends the variable substitution.
+ test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
+-echo "configure:831: checking whether build environment is sane" >&5
++echo "$as_me:1274: checking whether build environment is sane" >&5
++echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+ # Just in case
+ sleep 1
+-echo timestamp > conftestfile
++echo timestamp > conftest.file
+ # Do `set' in a subshell so we don't clobber the current shell's
+ # arguments. Must try -L first in case configure is actually a
+ # symlink; some systems play weird games with the mod time of symlinks
+ # (eg FreeBSD returns the mod time of the symlink's containing
+ # directory).
+ if (
+- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+- set X `ls -t $srcdir/configure conftestfile`
++ set X `ls -t $srcdir/configure conftest.file`
+ fi
+- if test "$*" != "X $srcdir/configure conftestfile" \
+- && test "$*" != "X conftestfile $srcdir/configure"; then
++ rm -f conftest.file
++ if test "$*" != "X $srcdir/configure conftest.file" \
++ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+- { echo "configure: error: ls -t appears to fail. Make sure there is not a broken
+-alias in your environment" 1>&2; exit 1; }
++ { { echo "$as_me:1298: error: ls -t appears to fail. Make sure there is not a broken
++alias in your environment" >&5
++echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
++alias in your environment" >&2;}
++ { (exit 1); exit 1; }; }
+ fi
+
+- test "$2" = conftestfile
++ test "$2" = conftest.file
+ )
+ then
+ # Ok.
+ :
+ else
+- { echo "configure: error: newly created file is older than distributed files!
+-Check your system clock" 1>&2; exit 1; }
+-fi
+-rm -f conftest*
+-echo "$ac_t""yes" 1>&6
+-if test "$program_transform_name" = s,x,x,; then
+- program_transform_name=
+-else
+- # Double any \ or $. echo might interpret backslashes.
+- cat <<\EOF_SED > conftestsed
+-s,\\,\\\\,g; s,\$,$$,g
+-EOF_SED
+- program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+- rm -f conftestsed
++ { { echo "$as_me:1311: error: newly created file is older than distributed files!
++Check your system clock" >&5
++echo "$as_me: error: newly created file is older than distributed files!
++Check your system clock" >&2;}
++ { (exit 1); exit 1; }; }
+ fi
++echo "$as_me:1317: result: yes" >&5
++echo "${ECHO_T}yes" >&6
+ test "$program_prefix" != NONE &&
+- program_transform_name="s,^,${program_prefix},; $program_transform_name"
++ program_transform_name="s,^,$program_prefix,;$program_transform_name"
+ # Use a double $ so make ignores it.
+ test "$program_suffix" != NONE &&
+- program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
++ program_transform_name="s,\$,$program_suffix,;$program_transform_name"
++# Double any \ or $. echo might interpret backslashes.
++# By default was `s,x,x', remove it if useless.
++cat <<\_ACEOF >conftest.sed
++s/[\\$]/&&/g;s/;s,x,x,$//
++_ACEOF
++program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
++rm conftest.sed
++
++# expand $ac_aux_dir to an absolute path
++am_aux_dir=`cd $ac_aux_dir && pwd`
++
++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
++# Use eval to expand $SHELL
++if eval "$MISSING --run true"; then
++ am_missing_run="$MISSING --run "
++else
++ am_missing_run=
++ { echo "$as_me:1341: WARNING: \`missing' script is too old or missing" >&5
++echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
++fi
++
++for ac_prog in mawk gawk nawk awk
++do
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
++echo "$as_me:1349: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_AWK+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$AWK"; then
++ ac_cv_prog_AWK="$AWK" # Let the user override the test.
++else
++ ac_save_IFS=$IFS; IFS=$ac_path_separator
++ac_dummy="$PATH"
++for ac_dir in $ac_dummy; do
++ IFS=$ac_save_IFS
++ test -z "$ac_dir" && ac_dir=.
++ $as_executable_p "$ac_dir/$ac_word" || continue
++ac_cv_prog_AWK="$ac_prog"
++echo "$as_me:1364: found $ac_dir/$ac_word" >&5
++break
++done
++
++fi
++fi
++AWK=$ac_cv_prog_AWK
++if test -n "$AWK"; then
++ echo "$as_me:1372: result: $AWK" >&5
++echo "${ECHO_T}$AWK" >&6
++else
++ echo "$as_me:1375: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
+
+-# sed with no file args requires a program.
+-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
++ test -n "$AWK" && break
++done
+
+-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+-echo "configure:888: checking whether ${MAKE-make} sets \${MAKE}" >&5
+-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:1382: checking whether ${MAKE-make} sets \${MAKE}" >&5
++echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6
++set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
++if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- cat > conftestmake <<\EOF
++ cat >conftest.make <<\EOF
+ all:
+ @echo 'ac_maketemp="${MAKE}"'
+ EOF
+ # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
++eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+ if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+ else
+ eval ac_cv_prog_make_${ac_make}_set=no
+ fi
+-rm -f conftestmake
++rm -f conftest.make
+ fi
+ if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
++ echo "$as_me:1402: result: yes" >&5
++echo "${ECHO_T}yes" >&6
+ SET_MAKE=
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:1406: result: no" >&5
++echo "${ECHO_T}no" >&6
+ SET_MAKE="MAKE=${MAKE-make}"
+ fi
+
++ # test to see if srcdir already configured
++if test "`cd $srcdir && pwd`" != "`pwd`" &&
++ test -f $srcdir/config.status; then
++ { { echo "$as_me:1414: error: source directory already configured; run \"make distclean\" there first" >&5
++echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
++ { (exit 1); exit 1; }; }
++fi
+
+-PACKAGE=$PACKAGE
+-
+-VERSION=$VERSION
++# Define the identity of the package.
++ PACKAGE=$PACKAGE
++ VERSION=$VERSION
+
+-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+- { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+-fi
+-cat >> confdefs.h <<EOF
++cat >>confdefs.h <<EOF
+ #define PACKAGE "$PACKAGE"
+ EOF
+
+-cat >> confdefs.h <<EOF
++cat >>confdefs.h <<EOF
+ #define VERSION "$VERSION"
+ EOF
+
++# Some tools Automake needs.
++
++ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
++
++AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
++
++AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
++
++AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
++
++MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
++
++AMTAR=${AMTAR-"${am_missing_run}tar"}
++
++install_sh=${install_sh-"$am_aux_dir/install-sh"}
++
++# Installed binaries are usually stripped using `strip' when the user
++# run `make install-strip'. However `strip' might not be the right
++# tool to use in cross-compilation environments, therefore Automake
++# will honor the `STRIP' environment variable to overrule this program.
++if test "$cross_compiling" != no; then
++ if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
++set dummy ${ac_tool_prefix}strip; ac_word=$2
++echo "$as_me:1455: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_STRIP+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$STRIP"; then
++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
++else
++ ac_save_IFS=$IFS; IFS=$ac_path_separator
++ac_dummy="$PATH"
++for ac_dir in $ac_dummy; do
++ IFS=$ac_save_IFS
++ test -z "$ac_dir" && ac_dir=.
++ $as_executable_p "$ac_dir/$ac_word" || continue
++ac_cv_prog_STRIP="${ac_tool_prefix}strip"
++echo "$as_me:1470: found $ac_dir/$ac_word" >&5
++break
++done
++
++fi
++fi
++STRIP=$ac_cv_prog_STRIP
++if test -n "$STRIP"; then
++ echo "$as_me:1478: result: $STRIP" >&5
++echo "${ECHO_T}$STRIP" >&6
++else
++ echo "$as_me:1481: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++fi
++if test -z "$ac_cv_prog_STRIP"; then
++ ac_ct_STRIP=$STRIP
++ # Extract the first word of "strip", so it can be a program name with args.
++set dummy strip; ac_word=$2
++echo "$as_me:1490: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$ac_ct_STRIP"; then
++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
++else
++ ac_save_IFS=$IFS; IFS=$ac_path_separator
++ac_dummy="$PATH"
++for ac_dir in $ac_dummy; do
++ IFS=$ac_save_IFS
++ test -z "$ac_dir" && ac_dir=.
++ $as_executable_p "$ac_dir/$ac_word" || continue
++ac_cv_prog_ac_ct_STRIP="strip"
++echo "$as_me:1505: found $ac_dir/$ac_word" >&5
++break
++done
+
++ test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
++fi
++fi
++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
++if test -n "$ac_ct_STRIP"; then
++ echo "$as_me:1514: result: $ac_ct_STRIP" >&5
++echo "${ECHO_T}$ac_ct_STRIP" >&6
++else
++ echo "$as_me:1517: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
+
+-missing_dir=`cd $ac_aux_dir && pwd`
+-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
+-echo "configure:934: checking for working aclocal" >&5
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf. Sigh.
+-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
+- ACLOCAL=aclocal
+- echo "$ac_t""found" 1>&6
+-else
+- ACLOCAL="$missing_dir/missing aclocal"
+- echo "$ac_t""missing" 1>&6
+-fi
+-
+-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
+-echo "configure:947: checking for working autoconf" >&5
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf. Sigh.
+-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+- AUTOCONF=autoconf
+- echo "$ac_t""found" 1>&6
+-else
+- AUTOCONF="$missing_dir/missing autoconf"
+- echo "$ac_t""missing" 1>&6
+-fi
+-
+-echo $ac_n "checking for working automake""... $ac_c" 1>&6
+-echo "configure:960: checking for working automake" >&5
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf. Sigh.
+-if (automake --version) < /dev/null > /dev/null 2>&1; then
+- AUTOMAKE=automake
+- echo "$ac_t""found" 1>&6
+-else
+- AUTOMAKE="$missing_dir/missing automake"
+- echo "$ac_t""missing" 1>&6
+-fi
+-
+-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
+-echo "configure:973: checking for working autoheader" >&5
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf. Sigh.
+-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+- AUTOHEADER=autoheader
+- echo "$ac_t""found" 1>&6
+-else
+- AUTOHEADER="$missing_dir/missing autoheader"
+- echo "$ac_t""missing" 1>&6
+-fi
+-
+-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
+-echo "configure:986: checking for working makeinfo" >&5
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf. Sigh.
+-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+- MAKEINFO=makeinfo
+- echo "$ac_t""found" 1>&6
++ STRIP=$ac_ct_STRIP
+ else
+- MAKEINFO="$missing_dir/missing makeinfo"
+- echo "$ac_t""missing" 1>&6
++ STRIP="$ac_cv_prog_STRIP"
+ fi
+
++fi
++INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+
++# We need awk for the "check" target. The system "awk" is bad on
++# some platforms.
+
+-for ac_prog in gawk mawk nawk awk
++for ac_prog in mawk gawk nawk awk
+ do
+-# Extract the first word of "$ac_prog", so it can be a program name with args.
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
+ set dummy $ac_prog; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:1005: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:1536: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_AWK+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_prog_AWK="$ac_prog"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
++ ac_save_IFS=$IFS; IFS=$ac_path_separator
++ac_dummy="$PATH"
++for ac_dir in $ac_dummy; do
++ IFS=$ac_save_IFS
++ test -z "$ac_dir" && ac_dir=.
++ $as_executable_p "$ac_dir/$ac_word" || continue
++ac_cv_prog_AWK="$ac_prog"
++echo "$as_me:1551: found $ac_dir/$ac_word" >&5
++break
++done
++
+ fi
+ fi
+-AWK="$ac_cv_prog_AWK"
++AWK=$ac_cv_prog_AWK
+ if test -n "$AWK"; then
+- echo "$ac_t""$AWK" 1>&6
++ echo "$as_me:1559: result: $AWK" >&5
++echo "${ECHO_T}$AWK" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:1562: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
+-test -n "$AWK" && break
++ test -n "$AWK" && break
+ done
+
+-# Extract the first word of "gcc", so it can be a program name with args.
+-set dummy gcc; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:1037: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- if test -n "$CC"; then
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
++set dummy ${ac_tool_prefix}gcc; ac_word=$2
++echo "$as_me:1577: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_prog_CC="gcc"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
++ ac_save_IFS=$IFS; IFS=$ac_path_separator
++ac_dummy="$PATH"
++for ac_dir in $ac_dummy; do
++ IFS=$ac_save_IFS
++ test -z "$ac_dir" && ac_dir=.
++ $as_executable_p "$ac_dir/$ac_word" || continue
++ac_cv_prog_CC="${ac_tool_prefix}gcc"
++echo "$as_me:1592: found $ac_dir/$ac_word" >&5
++break
++done
++
+ fi
+ fi
+-CC="$ac_cv_prog_CC"
++CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+- echo "$ac_t""$CC" 1>&6
++ echo "$as_me:1600: result: $CC" >&5
++echo "${ECHO_T}$CC" >&6
++else
++ echo "$as_me:1603: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++fi
++if test -z "$ac_cv_prog_CC"; then
++ ac_ct_CC=$CC
++ # Extract the first word of "gcc", so it can be a program name with args.
++set dummy gcc; ac_word=$2
++echo "$as_me:1612: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$ac_ct_CC"; then
++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
++else
++ ac_save_IFS=$IFS; IFS=$ac_path_separator
++ac_dummy="$PATH"
++for ac_dir in $ac_dummy; do
++ IFS=$ac_save_IFS
++ test -z "$ac_dir" && ac_dir=.
++ $as_executable_p "$ac_dir/$ac_word" || continue
++ac_cv_prog_ac_ct_CC="gcc"
++echo "$as_me:1627: found $ac_dir/$ac_word" >&5
++break
++done
++
++fi
++fi
++ac_ct_CC=$ac_cv_prog_ac_ct_CC
++if test -n "$ac_ct_CC"; then
++ echo "$as_me:1635: result: $ac_ct_CC" >&5
++echo "${ECHO_T}$ac_ct_CC" >&6
++else
++ echo "$as_me:1638: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++ CC=$ac_ct_CC
+ else
+- echo "$ac_t""no" 1>&6
++ CC="$ac_cv_prog_CC"
+ fi
+
+ if test -z "$CC"; then
++ if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
++set dummy ${ac_tool_prefix}cc; ac_word=$2
++echo "$as_me:1651: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$CC"; then
++ ac_cv_prog_CC="$CC" # Let the user override the test.
++else
++ ac_save_IFS=$IFS; IFS=$ac_path_separator
++ac_dummy="$PATH"
++for ac_dir in $ac_dummy; do
++ IFS=$ac_save_IFS
++ test -z "$ac_dir" && ac_dir=.
++ $as_executable_p "$ac_dir/$ac_word" || continue
++ac_cv_prog_CC="${ac_tool_prefix}cc"
++echo "$as_me:1666: found $ac_dir/$ac_word" >&5
++break
++done
++
++fi
++fi
++CC=$ac_cv_prog_CC
++if test -n "$CC"; then
++ echo "$as_me:1674: result: $CC" >&5
++echo "${ECHO_T}$CC" >&6
++else
++ echo "$as_me:1677: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++fi
++if test -z "$ac_cv_prog_CC"; then
++ ac_ct_CC=$CC
+ # Extract the first word of "cc", so it can be a program name with args.
+ set dummy cc; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:1067: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:1686: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$ac_ct_CC"; then
++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
++else
++ ac_save_IFS=$IFS; IFS=$ac_path_separator
++ac_dummy="$PATH"
++for ac_dir in $ac_dummy; do
++ IFS=$ac_save_IFS
++ test -z "$ac_dir" && ac_dir=.
++ $as_executable_p "$ac_dir/$ac_word" || continue
++ac_cv_prog_ac_ct_CC="cc"
++echo "$as_me:1701: found $ac_dir/$ac_word" >&5
++break
++done
++
++fi
++fi
++ac_ct_CC=$ac_cv_prog_ac_ct_CC
++if test -n "$ac_ct_CC"; then
++ echo "$as_me:1709: result: $ac_ct_CC" >&5
++echo "${ECHO_T}$ac_ct_CC" >&6
++else
++ echo "$as_me:1712: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++ CC=$ac_ct_CC
++else
++ CC="$ac_cv_prog_CC"
++fi
++
++fi
++if test -z "$CC"; then
++ # Extract the first word of "cc", so it can be a program name with args.
++set dummy cc; ac_word=$2
++echo "$as_me:1725: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_prog_rejected=no
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+- ac_prog_rejected=yes
+- continue
+- fi
+- ac_cv_prog_CC="cc"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
++ ac_save_IFS=$IFS; IFS=$ac_path_separator
++ac_dummy="$PATH"
++for ac_dir in $ac_dummy; do
++ IFS=$ac_save_IFS
++ test -z "$ac_dir" && ac_dir=.
++ $as_executable_p "$ac_dir/$ac_word" || continue
++if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
++ ac_prog_rejected=yes
++ continue
++fi
++ac_cv_prog_CC="cc"
++echo "$as_me:1745: found $ac_dir/$ac_word" >&5
++break
++done
++
+ if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+- if test $# -gt 0; then
++ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+- set dummy "$ac_dir/$ac_word" "$@"
++ set dummy "$ac_dir/$ac_word" ${1+"$@"}
+ shift
+ ac_cv_prog_CC="$@"
+ fi
+ fi
+ fi
+ fi
+-CC="$ac_cv_prog_CC"
++CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+- echo "$ac_t""$CC" 1>&6
++ echo "$as_me:1767: result: $CC" >&5
++echo "${ECHO_T}$CC" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:1770: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
+- if test -z "$CC"; then
+- case "`uname -s`" in
+- *win32* | *WIN32*)
+- # Extract the first word of "cl", so it can be a program name with args.
+-set dummy cl; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:1118: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++fi
++if test -z "$CC"; then
++ if test -n "$ac_tool_prefix"; then
++ for ac_prog in cl
++ do
++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
++set dummy $ac_tool_prefix$ac_prog; ac_word=$2
++echo "$as_me:1781: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_prog_CC="cl"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
++ ac_save_IFS=$IFS; IFS=$ac_path_separator
++ac_dummy="$PATH"
++for ac_dir in $ac_dummy; do
++ IFS=$ac_save_IFS
++ test -z "$ac_dir" && ac_dir=.
++ $as_executable_p "$ac_dir/$ac_word" || continue
++ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
++echo "$as_me:1796: found $ac_dir/$ac_word" >&5
++break
++done
++
+ fi
+ fi
+-CC="$ac_cv_prog_CC"
++CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+- echo "$ac_t""$CC" 1>&6
++ echo "$as_me:1804: result: $CC" >&5
++echo "${ECHO_T}$CC" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:1807: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+- ;;
+- esac
+- fi
+- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
++
++ test -n "$CC" && break
++ done
+ fi
++if test -z "$CC"; then
++ ac_ct_CC=$CC
++ for ac_prog in cl
++do
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
++echo "$as_me:1820: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$ac_ct_CC"; then
++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
++else
++ ac_save_IFS=$IFS; IFS=$ac_path_separator
++ac_dummy="$PATH"
++for ac_dir in $ac_dummy; do
++ IFS=$ac_save_IFS
++ test -z "$ac_dir" && ac_dir=.
++ $as_executable_p "$ac_dir/$ac_word" || continue
++ac_cv_prog_ac_ct_CC="$ac_prog"
++echo "$as_me:1835: found $ac_dir/$ac_word" >&5
++break
++done
+
+-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+-echo "configure:1150: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
++fi
++fi
++ac_ct_CC=$ac_cv_prog_ac_ct_CC
++if test -n "$ac_ct_CC"; then
++ echo "$as_me:1843: result: $ac_ct_CC" >&5
++echo "${ECHO_T}$ac_ct_CC" >&6
++else
++ echo "$as_me:1846: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
+
+-ac_ext=c
+-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+-ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+-cross_compiling=$ac_cv_prog_cc_cross
++ test -n "$ac_ct_CC" && break
++done
+
+-cat > conftest.$ac_ext << EOF
++ CC=$ac_ct_CC
++fi
++
++fi
++
++test -z "$CC" && { { echo "$as_me:1858: error: no acceptable cc found in \$PATH" >&5
++echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
++ { (exit 1); exit 1; }; }
++
++# Provide some information about the compiler.
++echo "$as_me:1863:" \
++ "checking for C compiler version" >&5
++ac_compiler=`set X $ac_compile; echo $2`
++{ (eval echo "$as_me:1866: \"$ac_compiler --version </dev/null >&5\"") >&5
++ (eval $ac_compiler --version </dev/null >&5) 2>&5
++ ac_status=$?
++ echo "$as_me:1869: \$? = $ac_status" >&5
++ (exit $ac_status); }
++{ (eval echo "$as_me:1871: \"$ac_compiler -v </dev/null >&5\"") >&5
++ (eval $ac_compiler -v </dev/null >&5) 2>&5
++ ac_status=$?
++ echo "$as_me:1874: \$? = $ac_status" >&5
++ (exit $ac_status); }
++{ (eval echo "$as_me:1876: \"$ac_compiler -V </dev/null >&5\"") >&5
++ (eval $ac_compiler -V </dev/null >&5) 2>&5
++ ac_status=$?
++ echo "$as_me:1879: \$? = $ac_status" >&5
++ (exit $ac_status); }
+
+-#line 1161 "configure"
++cat >conftest.$ac_ext <<_ACEOF
++#line 1883 "configure"
+ #include "confdefs.h"
+
+-main(){return(0);}
+-EOF
+-if { (eval echo configure:1166: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+- ac_cv_prog_cc_works=yes
+- # If we can't run a trivial program, we are probably using a cross compiler.
+- if (./conftest; exit) 2>/dev/null; then
+- ac_cv_prog_cc_cross=no
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++ac_clean_files_save=$ac_clean_files
++ac_clean_files="$ac_clean_files a.out a.exe"
++# Try to create an executable without -o first, disregard a.out.
++# It will help us diagnose broken compilers, and finding out an intuition
++# of exeext.
++echo "$as_me:1899: checking for C compiler default output" >&5
++echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6
++ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
++if { (eval echo "$as_me:1902: \"$ac_link_default\"") >&5
++ (eval $ac_link_default) 2>&5
++ ac_status=$?
++ echo "$as_me:1905: \$? = $ac_status" >&5
++ (exit $ac_status); }; then
++ # Find the output, starting from the most likely. This scheme is
++# not robust to junk in `.', hence go to wildcards (a.*) only as a last
++# resort.
++for ac_file in `ls a.exe conftest.exe 2>/dev/null;
++ ls a.out conftest 2>/dev/null;
++ ls a.* conftest.* 2>/dev/null`; do
++ case $ac_file in
++ *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;;
++ a.out ) # We found the default executable, but exeext='' is most
++ # certainly right.
++ break;;
++ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
++ # FIXME: I believe we export ac_cv_exeext for Libtool --akim.
++ export ac_cv_exeext
++ break;;
++ * ) break;;
++ esac
++done
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++{ { echo "$as_me:1928: error: C compiler cannot create executables" >&5
++echo "$as_me: error: C compiler cannot create executables" >&2;}
++ { (exit 77); exit 77; }; }
++fi
++
++ac_exeext=$ac_cv_exeext
++echo "$as_me:1934: result: $ac_file" >&5
++echo "${ECHO_T}$ac_file" >&6
++
++# Check the compiler produces executables we can run. If not, either
++# the compiler is broken, or we cross compile.
++echo "$as_me:1939: checking whether the C compiler works" >&5
++echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
++# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
++# If not cross compiling, check that we can run a simple program.
++if test "$cross_compiling" != yes; then
++ if { ac_try='./$ac_file'
++ { (eval echo "$as_me:1945: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:1948: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ cross_compiling=no
+ else
+- ac_cv_prog_cc_cross=yes
++ if test "$cross_compiling" = maybe; then
++ cross_compiling=yes
++ else
++ { { echo "$as_me:1955: error: cannot run C compiled programs.
++If you meant to cross compile, use \`--host'." >&5
++echo "$as_me: error: cannot run C compiled programs.
++If you meant to cross compile, use \`--host'." >&2;}
++ { (exit 1); exit 1; }; }
++ fi
+ fi
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- ac_cv_prog_cc_works=no
+ fi
+-rm -fr conftest*
+-ac_ext=c
+-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+-ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+-cross_compiling=$ac_cv_prog_cc_cross
+-
+-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+-if test $ac_cv_prog_cc_works = no; then
+- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+-fi
+-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+-echo "configure:1192: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+-cross_compiling=$ac_cv_prog_cc_cross
+-
+-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+-echo "configure:1197: checking whether we are using GNU C" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.c <<EOF
+-#ifdef __GNUC__
+- yes;
+-#endif
+-EOF
+-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1206: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+- ac_cv_prog_gcc=yes
++echo "$as_me:1963: result: yes" >&5
++echo "${ECHO_T}yes" >&6
++
++rm -f a.out a.exe conftest$ac_cv_exeext
++ac_clean_files=$ac_clean_files_save
++# Check the compiler produces executables we can run. If not, either
++# the compiler is broken, or we cross compile.
++echo "$as_me:1970: checking whether we are cross compiling" >&5
++echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
++echo "$as_me:1972: result: $cross_compiling" >&5
++echo "${ECHO_T}$cross_compiling" >&6
++
++echo "$as_me:1975: checking for executable suffix" >&5
++echo $ECHO_N "checking for executable suffix... $ECHO_C" >&6
++if { (eval echo "$as_me:1977: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:1980: \$? = $ac_status" >&5
++ (exit $ac_status); }; then
++ # If both `conftest.exe' and `conftest' are `present' (well, observable)
++# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
++# work properly (i.e., refer to `conftest.exe'), while it won't with
++# `rm'.
++for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do
++ case $ac_file in
++ *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;;
++ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
++ export ac_cv_exeext
++ break;;
++ * ) break;;
++ esac
++done
+ else
+- ac_cv_prog_gcc=no
+-fi
++ { { echo "$as_me:1996: error: cannot compute EXEEXT: cannot compile and link" >&5
++echo "$as_me: error: cannot compute EXEEXT: cannot compile and link" >&2;}
++ { (exit 1); exit 1; }; }
+ fi
+
+-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
++rm -f conftest$ac_cv_exeext
++echo "$as_me:2002: result: $ac_cv_exeext" >&5
++echo "${ECHO_T}$ac_cv_exeext" >&6
++
++rm -f conftest.$ac_ext
++EXEEXT=$ac_cv_exeext
++ac_exeext=$EXEEXT
++echo "$as_me:2008: checking for object suffix" >&5
++echo $ECHO_N "checking for object suffix... $ECHO_C" >&6
++if test "${ac_cv_objext+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ cat >conftest.$ac_ext <<_ACEOF
++#line 2014 "configure"
++#include "confdefs.h"
++
++int
++main ()
++{
+
+-if test $ac_cv_prog_gcc = yes; then
+- GCC=yes
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.o conftest.obj
++if { (eval echo "$as_me:2026: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:2029: \$? = $ac_status" >&5
++ (exit $ac_status); }; then
++ for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
++ case $ac_file in
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;;
++ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
++ break;;
++ esac
++done
+ else
+- GCC=
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++{ { echo "$as_me:2041: error: cannot compute OBJEXT: cannot compile" >&5
++echo "$as_me: error: cannot compute OBJEXT: cannot compile" >&2;}
++ { (exit 1); exit 1; }; }
++fi
++
++rm -f conftest.$ac_cv_objext conftest.$ac_ext
+ fi
++echo "$as_me:2048: result: $ac_cv_objext" >&5
++echo "${ECHO_T}$ac_cv_objext" >&6
++OBJEXT=$ac_cv_objext
++ac_objext=$OBJEXT
++echo "$as_me:2052: checking whether we are using the GNU C compiler" >&5
++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
++if test "${ac_cv_c_compiler_gnu+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ cat >conftest.$ac_ext <<_ACEOF
++#line 2058 "configure"
++#include "confdefs.h"
+
+-ac_test_CFLAGS="${CFLAGS+set}"
+-ac_save_CFLAGS="$CFLAGS"
+-CFLAGS=
+-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+-echo "configure:1225: checking whether ${CC-cc} accepts -g" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++int
++main ()
++{
++#ifndef __GNUC__
++ choke me
++#endif
++
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:2073: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:2076: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:2079: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:2082: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_compiler_gnu=yes
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_compiler_gnu=no
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++ac_cv_c_compiler_gnu=$ac_compiler_gnu
++
++fi
++echo "$as_me:2094: result: $ac_cv_c_compiler_gnu" >&5
++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
++GCC=`test $ac_compiler_gnu = yes && echo yes`
++ac_test_CFLAGS=${CFLAGS+set}
++ac_save_CFLAGS=$CFLAGS
++CFLAGS="-g"
++echo "$as_me:2100: checking whether $CC accepts -g" >&5
++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
++if test "${ac_cv_prog_cc_g+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- echo 'void f(){}' > conftest.c
+-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
++ cat >conftest.$ac_ext <<_ACEOF
++#line 2106 "configure"
++#include "confdefs.h"
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:2118: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:2121: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:2124: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:2127: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_g=yes
+ else
+- ac_cv_prog_cc_g=no
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_cv_prog_cc_g=no
+ fi
+-rm -f conftest*
+-
++rm -f conftest.$ac_objext conftest.$ac_ext
+ fi
+-
+-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
++echo "$as_me:2137: result: $ac_cv_prog_cc_g" >&5
++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+ if test "$ac_test_CFLAGS" = set; then
+- CFLAGS="$ac_save_CFLAGS"
++ CFLAGS=$ac_save_CFLAGS
+ elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+@@ -1251,86 +2151,450 @@
+ CFLAGS=
+ fi
+ fi
++# Some people use a C++ compiler to compile C. Since we use `exit',
++# in C++ we need to declare it. In case someone uses the same compiler
++# for both compiling C and C++ we need to have the C++ compiler decide
++# the declaration of exit, since it's the most demanding environment.
++cat >conftest.$ac_ext <<_ACEOF
++#ifndef __cplusplus
++ choke me
++#endif
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:2164: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:2167: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:2170: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:2173: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ for ac_declaration in \
++ ''\
++ '#include <stdlib.h>' \
++ 'extern "C" void std::exit (int) throw (); using std::exit;' \
++ 'extern "C" void std::exit (int); using std::exit;' \
++ 'extern "C" void exit (int) throw ();' \
++ 'extern "C" void exit (int);' \
++ 'void exit (int);'
++do
++ cat >conftest.$ac_ext <<_ACEOF
++#line 2185 "configure"
++#include "confdefs.h"
++#include <stdlib.h>
++$ac_declaration
++int
++main ()
++{
++exit (42);
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:2198: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:2201: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:2204: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:2207: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ :
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++continue
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++ cat >conftest.$ac_ext <<_ACEOF
++#line 2217 "configure"
++#include "confdefs.h"
++$ac_declaration
++int
++main ()
++{
++exit (42);
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:2229: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:2232: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:2235: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:2238: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ break
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++done
++rm -f conftest*
++if test -n "$ac_declaration"; then
++ echo '#ifdef __cplusplus' >>confdefs.h
++ echo $ac_declaration >>confdefs.h
++ echo '#endif' >>confdefs.h
++fi
+
+-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+-echo "configure:1257: checking how to run the C preprocessor" >&5
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++rm -f .deps 2>/dev/null
++mkdir .deps 2>/dev/null
++if test -d .deps; then
++ DEPDIR=.deps
++else
++ # MS-DOS does not allow filenames that begin with a dot.
++ DEPDIR=_deps
++fi
++rmdir .deps 2>/dev/null
++
++ac_config_commands="$ac_config_commands depfiles"
++
++am_make=${MAKE-make}
++cat > confinc << 'END'
++doit:
++ @echo done
++END
++# If we don't find an include directive, just comment out the code.
++echo "$as_me:2282: checking for style of include used by $am_make" >&5
++echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
++am__include="#"
++am__quote=
++_am_result=none
++# First try GNU make style include.
++echo "include confinc" > confmf
++# We grep out `Entering directory' and `Leaving directory'
++# messages which can occur if `w' ends up in MAKEFLAGS.
++# In particular we don't look at `^make:' because GNU make might
++# be invoked under some other name (usually "gmake"), in which
++# case it prints its new name instead of `make'.
++if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
++ am__include=include
++ am__quote=
++ _am_result=GNU
++fi
++# Now try BSD make style include.
++if test "$am__include" = "#"; then
++ echo '.include "confinc"' > confmf
++ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
++ am__include=.include
++ am__quote="\""
++ _am_result=BSD
++ fi
++fi
++
++echo "$as_me:2309: result: $_am_result" >&5
++echo "${ECHO_T}$_am_result" >&6
++rm -f confinc confmf
++
++# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
++if test "${enable_dependency_tracking+set}" = set; then
++ enableval="$enable_dependency_tracking"
++
++fi;
++if test "x$enable_dependency_tracking" != xno; then
++ am_depcomp="$ac_aux_dir/depcomp"
++ AMDEPBACKSLASH='\'
++fi
++
++if test "x$enable_dependency_tracking" != xno; then
++ AMDEP_TRUE=
++ AMDEP_FALSE='#'
++else
++ AMDEP_TRUE='#'
++ AMDEP_FALSE=
++fi
++
++depcc="$CC" am_compiler_list=
++
++echo "$as_me:2333: checking dependency style of $depcc" >&5
++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
++if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
++ # We make a subdir and do the tests there. Otherwise we can end up
++ # making bogus files that we don't know about and never remove. For
++ # instance it was reported that on HP-UX the gcc test will end up
++ # making a dummy file named `D' -- because `-MD' means `put the output
++ # in D'.
++ mkdir conftest.dir
++ # Copy depcomp to subdir because otherwise we won't find it if we're
++ # using a relative directory.
++ cp "$am_depcomp" conftest.dir
++ cd conftest.dir
++
++ am_cv_CC_dependencies_compiler_type=none
++ if test "$am_compiler_list" = ""; then
++ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
++ fi
++ for depmode in $am_compiler_list; do
++ # We need to recreate these files for each test, as the compiler may
++ # overwrite some of them when testing with obscure command lines.
++ # This happens at least with the AIX C compiler.
++ echo '#include "conftest.h"' > conftest.c
++ echo 'int i;' > conftest.h
++ echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
++
++ case $depmode in
++ nosideeffect)
++ # after this tag, mechanisms are not by side-effect, so they'll
++ # only be used when explicitly requested
++ if test "x$enable_dependency_tracking" = xyes; then
++ continue
++ else
++ break
++ fi
++ ;;
++ none) break ;;
++ esac
++ # We check with `-c' and `-o' for the sake of the "dashmstdout"
++ # mode. It turns out that the SunPro C++ compiler does not properly
++ # handle `-M -o', and we need to detect this.
++ if depmode=$depmode \
++ source=conftest.c object=conftest.o \
++ depfile=conftest.Po tmpdepfile=conftest.TPo \
++ $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
++ grep conftest.h conftest.Po > /dev/null 2>&1 &&
++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
++ am_cv_CC_dependencies_compiler_type=$depmode
++ break
++ fi
++ done
++
++ cd ..
++ rm -rf conftest.dir
++else
++ am_cv_CC_dependencies_compiler_type=none
++fi
++
++fi
++echo "$as_me:2395: result: $am_cv_CC_dependencies_compiler_type" >&5
++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
++CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++echo "$as_me:2404: checking how to run the C preprocessor" >&5
++echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+ # On Suns, sometimes $CPP names a directory.
+ if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+ fi
+ if test -z "$CPP"; then
+-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ if test "${ac_cv_prog_CPP+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- # This must be in double quotes, not single quotes, because CPP may get
+- # substituted into the Makefile and "${CC-cc}" will confuse make.
+- CPP="${CC-cc} -E"
++ # Double quotes because CPP needs to be expanded
++ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
++ do
++ ac_preproc_ok=false
++for ac_c_preproc_warn_flag in '' yes
++do
++ # Use a header file that comes with gcc, so configuring glibc
++ # with a fresh cross-compiler works.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+- # not just through cpp.
+- cat > conftest.$ac_ext <<EOF
+-#line 1272 "configure"
++ # not just through cpp. "Syntax error" is here to catch this case.
++ cat >conftest.$ac_ext <<_ACEOF
++#line 2425 "configure"
+ #include "confdefs.h"
+ #include <assert.h>
+-Syntax Error
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:1278: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+-if test -z "$ac_err"; then
++ Syntax error
++_ACEOF
++if { (eval echo "$as_me:2430: \"$ac_cpp conftest.$ac_ext\"") >&5
++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++ ac_status=$?
++ egrep -v '^ *\+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:2436: \$? = $ac_status" >&5
++ (exit $ac_status); } >/dev/null; then
++ if test -s conftest.err; then
++ ac_cpp_err=$ac_c_preproc_warn_flag
++ else
++ ac_cpp_err=
++ fi
++else
++ ac_cpp_err=yes
++fi
++if test -z "$ac_cpp_err"; then
+ :
+ else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- CPP="${CC-cc} -E -traditional-cpp"
+- cat > conftest.$ac_ext <<EOF
+-#line 1289 "configure"
++ # Broken: fails on valid input.
++continue
++fi
++rm -f conftest.err conftest.$ac_ext
++
++ # OK, works on sane cases. Now check whether non-existent headers
++ # can be detected and how.
++ cat >conftest.$ac_ext <<_ACEOF
++#line 2459 "configure"
+ #include "confdefs.h"
+-#include <assert.h>
+-Syntax Error
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:1295: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+-if test -z "$ac_err"; then
+- :
++#include <ac_nonexistent.h>
++_ACEOF
++if { (eval echo "$as_me:2463: \"$ac_cpp conftest.$ac_ext\"") >&5
++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++ ac_status=$?
++ egrep -v '^ *\+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:2469: \$? = $ac_status" >&5
++ (exit $ac_status); } >/dev/null; then
++ if test -s conftest.err; then
++ ac_cpp_err=$ac_c_preproc_warn_flag
++ else
++ ac_cpp_err=
++ fi
++else
++ ac_cpp_err=yes
++fi
++if test -z "$ac_cpp_err"; then
++ # Broken: success on invalid input.
++continue
+ else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- CPP="${CC-cc} -nologo -E"
+- cat > conftest.$ac_ext <<EOF
+-#line 1306 "configure"
++ # Passes both tests.
++ac_preproc_ok=:
++break
++fi
++rm -f conftest.err conftest.$ac_ext
++
++done
++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
++rm -f conftest.err conftest.$ac_ext
++if $ac_preproc_ok; then
++ break
++fi
++
++ done
++ ac_cv_prog_CPP=$CPP
++
++fi
++ CPP=$ac_cv_prog_CPP
++else
++ ac_cv_prog_CPP=$CPP
++fi
++echo "$as_me:2506: result: $CPP" >&5
++echo "${ECHO_T}$CPP" >&6
++ac_preproc_ok=false
++for ac_c_preproc_warn_flag in '' yes
++do
++ # Use a header file that comes with gcc, so configuring glibc
++ # with a fresh cross-compiler works.
++ # On the NeXT, cc -E runs the code through the compiler's parser,
++ # not just through cpp. "Syntax error" is here to catch this case.
++ cat >conftest.$ac_ext <<_ACEOF
++#line 2516 "configure"
+ #include "confdefs.h"
+ #include <assert.h>
+-Syntax Error
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:1312: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+-if test -z "$ac_err"; then
++ Syntax error
++_ACEOF
++if { (eval echo "$as_me:2521: \"$ac_cpp conftest.$ac_ext\"") >&5
++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++ ac_status=$?
++ egrep -v '^ *\+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:2527: \$? = $ac_status" >&5
++ (exit $ac_status); } >/dev/null; then
++ if test -s conftest.err; then
++ ac_cpp_err=$ac_c_preproc_warn_flag
++ else
++ ac_cpp_err=
++ fi
++else
++ ac_cpp_err=yes
++fi
++if test -z "$ac_cpp_err"; then
+ :
+ else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- CPP=/lib/cpp
++ # Broken: fails on valid input.
++continue
+ fi
+-rm -f conftest*
+-fi
+-rm -f conftest*
++rm -f conftest.err conftest.$ac_ext
++
++ # OK, works on sane cases. Now check whether non-existent headers
++ # can be detected and how.
++ cat >conftest.$ac_ext <<_ACEOF
++#line 2550 "configure"
++#include "confdefs.h"
++#include <ac_nonexistent.h>
++_ACEOF
++if { (eval echo "$as_me:2554: \"$ac_cpp conftest.$ac_ext\"") >&5
++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++ ac_status=$?
++ egrep -v '^ *\+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:2560: \$? = $ac_status" >&5
++ (exit $ac_status); } >/dev/null; then
++ if test -s conftest.err; then
++ ac_cpp_err=$ac_c_preproc_warn_flag
++ else
++ ac_cpp_err=
++ fi
++else
++ ac_cpp_err=yes
+ fi
+-rm -f conftest*
+- ac_cv_prog_CPP="$CPP"
++if test -z "$ac_cpp_err"; then
++ # Broken: success on invalid input.
++continue
++else
++ echo "$as_me: failed program was:" >&5
++ cat conftest.$ac_ext >&5
++ # Passes both tests.
++ac_preproc_ok=:
++break
+ fi
+- CPP="$ac_cv_prog_CPP"
++rm -f conftest.err conftest.$ac_ext
++
++done
++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
++rm -f conftest.err conftest.$ac_ext
++if $ac_preproc_ok; then
++ :
+ else
+- ac_cv_prog_CPP="$CPP"
++ { { echo "$as_me:2588: error: C preprocessor \"$CPP\" fails sanity check" >&5
++echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;}
++ { (exit 1); exit 1; }; }
+ fi
+-echo "$ac_t""$CPP" 1>&6
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ # Find a good install program. We prefer a C program (faster),
+ # so one script is as good as another. But avoid the broken or
+@@ -1339,31 +2603,39 @@
+ # SunOS /usr/etc/install
+ # IRIX /sbin/install
+ # AIX /bin/install
++# AmigaOS /C/install, which installs bootblocks on floppy discs
+ # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+ # AFS /usr/afsws/bin/install, which mishandles nonexistent args
+ # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+ # ./install, which can be erroneously created by make from ./install.sh.
+-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+-echo "configure:1348: checking for a BSD compatible install" >&5
++echo "$as_me:2611: checking for a BSD compatible install" >&5
++echo $ECHO_N "checking for a BSD compatible install... $ECHO_C" >&6
+ if test -z "$INSTALL"; then
+-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++if test "${ac_cv_path_install+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
++ ac_save_IFS=$IFS; IFS=$ac_path_separator
+ for ac_dir in $PATH; do
++ IFS=$ac_save_IFS
+ # Account for people who put trailing slashes in PATH elements.
+- case "$ac_dir/" in
+- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
++ case $ac_dir/ in
++ / | ./ | .// | /cC/* \
++ | /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* \
++ | /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+- if test -f $ac_dir/$ac_prog; then
++ if $as_executable_p "$ac_dir/$ac_prog"; then
+ if test $ac_prog = install &&
+- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
++ grep dspmsg "$ac_dir/$ac_prog" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
++ elif test $ac_prog = install &&
++ grep pwplus "$ac_dir/$ac_prog" >/dev/null 2>&1; then
++ # program-specific install script used by HP pwplus--don't use.
++ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+@@ -1373,208 +2645,181 @@
+ ;;
+ esac
+ done
+- IFS="$ac_save_IFS"
+
+ fi
+ if test "${ac_cv_path_install+set}" = set; then
+- INSTALL="$ac_cv_path_install"
++ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+- INSTALL="$ac_install_sh"
++ INSTALL=$ac_install_sh
+ fi
+ fi
+-echo "$ac_t""$INSTALL" 1>&6
++echo "$as_me:2660: result: $INSTALL" >&5
++echo "${ECHO_T}$INSTALL" >&6
+
+ # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+ # It thinks the first close brace ends the variable substitution.
+ test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+-echo "configure:1401: checking whether ln -s works" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:2671: checking whether ln -s works" >&5
++echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
++LN_S=$as_ln_s
++if test "$LN_S" = "ln -s"; then
++ echo "$as_me:2675: result: yes" >&5
++echo "${ECHO_T}yes" >&6
++else
++ echo "$as_me:2678: result: no, using $LN_S" >&5
++echo "${ECHO_T}no, using $LN_S" >&6
++fi
++
++echo "$as_me:2682: checking whether ${MAKE-make} sets \${MAKE}" >&5
++echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6
++set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
++if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- rm -f conftestdata
+-if ln -s X conftestdata 2>/dev/null
+-then
+- rm -f conftestdata
+- ac_cv_prog_LN_S="ln -s"
+-else
+- ac_cv_prog_LN_S=ln
+-fi
+-fi
+-LN_S="$ac_cv_prog_LN_S"
+-if test "$ac_cv_prog_LN_S" = "ln -s"; then
+- echo "$ac_t""yes" 1>&6
+-else
+- echo "$ac_t""no" 1>&6
+-fi
+-
+-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+-echo "configure:1422: checking whether ${MAKE-make} sets \${MAKE}" >&5
+-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftestmake <<\EOF
++ cat >conftest.make <<\EOF
+ all:
+ @echo 'ac_maketemp="${MAKE}"'
+ EOF
+ # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
++eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+ if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+ else
+ eval ac_cv_prog_make_${ac_make}_set=no
+ fi
+-rm -f conftestmake
++rm -f conftest.make
+ fi
+ if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
++ echo "$as_me:2702: result: yes" >&5
++echo "${ECHO_T}yes" >&6
+ SET_MAKE=
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:2706: result: no" >&5
++echo "${ECHO_T}no" >&6
+ SET_MAKE="MAKE=${MAKE-make}"
+ fi
+
+-# Extract the first word of "ranlib", so it can be a program name with args.
+-set dummy ranlib; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:1451: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
++set dummy ${ac_tool_prefix}ranlib; ac_word=$2
++echo "$as_me:2714: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_RANLIB+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_prog_RANLIB="ranlib"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
+- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
++ ac_save_IFS=$IFS; IFS=$ac_path_separator
++ac_dummy="$PATH"
++for ac_dir in $ac_dummy; do
++ IFS=$ac_save_IFS
++ test -z "$ac_dir" && ac_dir=.
++ $as_executable_p "$ac_dir/$ac_word" || continue
++ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
++echo "$as_me:2729: found $ac_dir/$ac_word" >&5
++break
++done
++
+ fi
+ fi
+-RANLIB="$ac_cv_prog_RANLIB"
++RANLIB=$ac_cv_prog_RANLIB
+ if test -n "$RANLIB"; then
+- echo "$ac_t""$RANLIB" 1>&6
++ echo "$as_me:2737: result: $RANLIB" >&5
++echo "${ECHO_T}$RANLIB" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:2740: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++fi
++if test -z "$ac_cv_prog_RANLIB"; then
++ ac_ct_RANLIB=$RANLIB
++ # Extract the first word of "ranlib", so it can be a program name with args.
++set dummy ranlib; ac_word=$2
++echo "$as_me:2749: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$ac_ct_RANLIB"; then
++ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
++else
++ ac_save_IFS=$IFS; IFS=$ac_path_separator
++ac_dummy="$PATH"
++for ac_dir in $ac_dummy; do
++ IFS=$ac_save_IFS
++ test -z "$ac_dir" && ac_dir=.
++ $as_executable_p "$ac_dir/$ac_word" || continue
++ac_cv_prog_ac_ct_RANLIB="ranlib"
++echo "$as_me:2764: found $ac_dir/$ac_word" >&5
++break
++done
++
++ test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
++fi
++fi
++ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
++if test -n "$ac_ct_RANLIB"; then
++ echo "$as_me:2773: result: $ac_ct_RANLIB" >&5
++echo "${ECHO_T}$ac_ct_RANLIB" >&6
++else
++ echo "$as_me:2776: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++ RANLIB=$ac_ct_RANLIB
++else
++ RANLIB="$ac_cv_prog_RANLIB"
+ fi
+
+ # Extract the first word of "sed", so it can be a program name with args.
+ set dummy sed; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:1481: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_path_SED'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:2787: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_path_SED+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- case "$SED" in
+- /*)
++ case $SED in
++ [\\/]* | ?:[\\/]*)
+ ac_cv_path_SED="$SED" # Let the user override the test with a path.
+ ;;
+- ?:/*)
+- ac_cv_path_SED="$SED" # Let the user override the test with a dos path.
+- ;;
+ *)
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_path_SED="$ac_dir/$ac_word"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
++ ac_save_IFS=$IFS; IFS=$ac_path_separator
++ac_dummy="$PATH"
++for ac_dir in $ac_dummy; do
++ IFS=$ac_save_IFS
++ test -z "$ac_dir" && ac_dir=.
++ if $as_executable_p "$ac_dir/$ac_word"; then
++ ac_cv_path_SED="$ac_dir/$ac_word"
++ echo "$as_me:2804: found $ac_dir/$ac_word" >&5
++ break
++fi
++done
++
+ test -z "$ac_cv_path_SED" && ac_cv_path_SED="$PATH"
+ ;;
+ esac
+ fi
+-SED="$ac_cv_path_SED"
+-if test -n "$SED"; then
+- echo "$ac_t""$SED" 1>&6
+-else
+- echo "$ac_t""no" 1>&6
+-fi
+-
+-
+-
+-
+-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+-echo "configure:1518: checking for Cygwin environment" >&5
+-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 1523 "configure"
+-#include "confdefs.h"
+-
+-int main() {
+-
+-#ifndef __CYGWIN__
+-#define __CYGWIN__ __CYGWIN32__
+-#endif
+-return __CYGWIN__;
+-; return 0; }
+-EOF
+-if { (eval echo configure:1534: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- rm -rf conftest*
+- ac_cv_cygwin=yes
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- ac_cv_cygwin=no
+-fi
+-rm -f conftest*
+-rm -f conftest*
+-fi
+-
+-echo "$ac_t""$ac_cv_cygwin" 1>&6
+-CYGWIN=
+-test "$ac_cv_cygwin" = yes && CYGWIN=yes
+-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
+-echo "configure:1551: checking for mingw32 environment" >&5
+-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 1556 "configure"
+-#include "confdefs.h"
++SED=$ac_cv_path_SED
+
+-int main() {
+-return __MINGW32__;
+-; return 0; }
+-EOF
+-if { (eval echo configure:1563: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- rm -rf conftest*
+- ac_cv_mingw32=yes
++if test -n "$SED"; then
++ echo "$as_me:2816: result: $SED" >&5
++echo "${ECHO_T}$SED" >&6
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- ac_cv_mingw32=no
+-fi
+-rm -f conftest*
+-rm -f conftest*
++ echo "$as_me:2819: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
+-echo "$ac_t""$ac_cv_mingw32" 1>&6
+-MINGW32=
+-test "$ac_cv_mingw32" = yes && MINGW32=yes
+ # Check whether --enable-shared or --disable-shared was given.
+ if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+@@ -1596,8 +2841,7 @@
+ esac
+ else
+ enable_shared=yes
+-fi
+-
++fi;
+ # Check whether --enable-static or --disable-static was given.
+ if test "${enable_static+set}" = set; then
+ enableval="$enable_static"
+@@ -1619,8 +2863,7 @@
+ esac
+ else
+ enable_static=yes
+-fi
+-
++fi;
+ # Check whether --enable-fast-install or --disable-fast-install was given.
+ if test "${enable_fast_install+set}" = set; then
+ enableval="$enable_fast_install"
+@@ -1642,52 +2885,58 @@
+ esac
+ else
+ enable_fast_install=yes
+-fi
+-
+-
++fi;
+ # Make sure we can run config.sub.
+-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+-fi
+-
+-echo $ac_n "checking host system type""... $ac_c" 1>&6
+-echo "configure:1655: checking host system type" >&5
+-
+-host_alias=$host
+-case "$host_alias" in
+-NONE)
+- case $nonopt in
+- NONE)
+- if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+- fi ;;
+- *) host_alias=$nonopt ;;
+- esac ;;
+-esac
+-
+-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+-echo "$ac_t""$host" 1>&6
+-
+-echo $ac_n "checking build system type""... $ac_c" 1>&6
+-echo "configure:1676: checking build system type" >&5
+-
+-build_alias=$build
+-case "$build_alias" in
+-NONE)
+- case $nonopt in
+- NONE) build_alias=$host_alias ;;
+- *) build_alias=$nonopt ;;
+- esac ;;
+-esac
+-
+-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+-echo "$ac_t""$build" 1>&6
++$ac_config_sub sun4 >/dev/null 2>&1 ||
++ { { echo "$as_me:2891: error: cannot run $ac_config_sub" >&5
++echo "$as_me: error: cannot run $ac_config_sub" >&2;}
++ { (exit 1); exit 1; }; }
++
++echo "$as_me:2895: checking build system type" >&5
++echo $ECHO_N "checking build system type... $ECHO_C" >&6
++if test "${ac_cv_build+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ ac_cv_build_alias=$build_alias
++test -z "$ac_cv_build_alias" &&
++ ac_cv_build_alias=`$ac_config_guess`
++test -z "$ac_cv_build_alias" &&
++ { { echo "$as_me:2904: error: cannot guess build type; you must specify one" >&5
++echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
++ { (exit 1); exit 1; }; }
++ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
++ { { echo "$as_me:2908: error: $ac_config_sub $ac_cv_build_alias failed." >&5
++echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed." >&2;}
++ { (exit 1); exit 1; }; }
++
++fi
++echo "$as_me:2913: result: $ac_cv_build" >&5
++echo "${ECHO_T}$ac_cv_build" >&6
++build=$ac_cv_build
++build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
++build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
++build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
++
++echo "$as_me:2920: checking host system type" >&5
++echo $ECHO_N "checking host system type... $ECHO_C" >&6
++if test "${ac_cv_host+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ ac_cv_host_alias=$host_alias
++test -z "$ac_cv_host_alias" &&
++ ac_cv_host_alias=$ac_cv_build_alias
++ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
++ { { echo "$as_me:2929: error: $ac_config_sub $ac_cv_host_alias failed" >&5
++echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
++ { (exit 1); exit 1; }; }
++
++fi
++echo "$as_me:2934: result: $ac_cv_host" >&5
++echo "${ECHO_T}$ac_cv_host" >&6
++host=$ac_cv_host
++host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
++host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
++host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+ # Check whether --with-gnu-ld or --without-gnu-ld was given.
+ if test "${with_gnu_ld+set}" = set; then
+@@ -1695,13 +2944,12 @@
+ test "$withval" = no || with_gnu_ld=yes
+ else
+ with_gnu_ld=no
+-fi
+-
++fi;
+ ac_prog=ld
+ if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+- echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
+-echo "configure:1705: checking for ld used by GCC" >&5
++ echo "$as_me:2951: checking for ld used by GCC" >&5
++echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+@@ -1730,14 +2978,14 @@
+ ;;
+ esac
+ elif test "$with_gnu_ld" = yes; then
+- echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
+-echo "configure:1735: checking for GNU ld" >&5
++ echo "$as_me:2981: checking for GNU ld" >&5
++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
+ else
+- echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
+-echo "configure:1738: checking for non-GNU ld" >&5
++ echo "$as_me:2984: checking for non-GNU ld" >&5
++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+ fi
+-if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++if test "${lt_cv_path_LD+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+@@ -1763,15 +3011,19 @@
+
+ LD="$lt_cv_path_LD"
+ if test -n "$LD"; then
+- echo "$ac_t""$LD" 1>&6
++ echo "$as_me:3014: result: $LD" >&5
++echo "${ECHO_T}$LD" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:3017: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
+-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
+-echo "configure:1773: checking if the linker ($LD) is GNU ld" >&5
+-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++test -z "$LD" && { { echo "$as_me:3020: error: no acceptable ld found in \$PATH" >&5
++echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
++ { (exit 1); exit 1; }; }
++echo "$as_me:3023: checking if the linker ($LD) is GNU ld" >&5
++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
++if test "${lt_cv_prog_gnu_ld+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+ if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+@@ -1780,27 +3032,26 @@
+ lt_cv_prog_gnu_ld=no
+ fi
+ fi
+-
+-echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
++echo "$as_me:3035: result: $lt_cv_prog_gnu_ld" >&5
++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
+ with_gnu_ld=$lt_cv_prog_gnu_ld
+
+-
+-echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
+-echo "configure:1790: checking for $LD option to reload object files" >&5
+-if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:3039: checking for $LD option to reload object files" >&5
++echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
++if test "${lt_cv_ld_reload_flag+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_ld_reload_flag='-r'
+ fi
+-
+-echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
++echo "$as_me:3046: result: $lt_cv_ld_reload_flag" >&5
++echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
+ reload_flag=$lt_cv_ld_reload_flag
+ test -n "$reload_flag" && reload_flag=" $reload_flag"
+
+-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
+-echo "configure:1802: checking for BSD-compatible nm" >&5
+-if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:3051: checking for BSD-compatible nm" >&5
++echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
++if test "${lt_cv_path_NM+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$NM"; then
+ # Let the user override the test.
+@@ -1833,12 +3084,13 @@
+ fi
+
+ NM="$lt_cv_path_NM"
+-echo "$ac_t""$NM" 1>&6
++echo "$as_me:3087: result: $NM" >&5
++echo "${ECHO_T}$NM" >&6
+
+-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
+-echo "configure:1840: checking how to recognise dependant libraries" >&5
+-if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:3090: checking how to recognise dependant libraries" >&5
++echo $ECHO_N "checking how to recognise dependant libraries... $ECHO_C" >&6
++if test "${lt_cv_deplibs_check_method+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+ lt_cv_file_magic_test_file=
+@@ -2003,84 +3255,18 @@
+ esac
+
+ fi
+-
+-echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
++echo "$as_me:3258: result: $lt_cv_deplibs_check_method" >&5
++echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
+ file_magic_cmd=$lt_cv_file_magic_cmd
+ deplibs_check_method=$lt_cv_deplibs_check_method
+
+-echo $ac_n "checking for object suffix""... $ac_c" 1>&6
+-echo "configure:2013: checking for object suffix" >&5
+-if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- rm -f conftest*
+-echo 'int i = 1;' > conftest.$ac_ext
+-if { (eval echo configure:2019: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- for ac_file in conftest.*; do
+- case $ac_file in
+- *.c) ;;
+- *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
+- esac
+- done
+-else
+- { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
+-fi
+-rm -f conftest*
+-fi
+-
+-echo "$ac_t""$ac_cv_objext" 1>&6
+-OBJEXT=$ac_cv_objext
+-ac_objext=$ac_cv_objext
+-
+-
+-
+-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+-echo "configure:2039: checking for executable suffix" >&5
+-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+- ac_cv_exeext=.exe
+-else
+- rm -f conftest*
+- echo 'int main () { return 0; }' > conftest.$ac_ext
+- ac_cv_exeext=
+- if { (eval echo configure:2049: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+- for file in conftest.*; do
+- case $file in
+- *.c | *.o | *.obj) ;;
+- *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+- esac
+- done
+- else
+- { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+- fi
+- rm -f conftest*
+- test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+-fi
+-fi
+-
+-EXEEXT=""
+-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+-echo "$ac_t""${ac_cv_exeext}" 1>&6
+-ac_exeext=$EXEEXT
+-
+-if test $host != $build; then
+- ac_tool_prefix=${host_alias}-
+-else
+- ac_tool_prefix=
+-fi
+-
+-
+-
+-
+ # Check for command to grab the raw symbol name followed by C symbol from nm.
+-echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
+-echo "configure:2080: checking command to parse $NM output" >&5
+-if eval "test \"`echo '$''{'lt_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:3264: checking command to parse $NM output" >&5
++echo $ECHO_N "checking command to parse $NM output... $ECHO_C" >&6
++if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+-
++
+ # These are sane defaults that work on at least a few old systems.
+ # [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+@@ -2152,10 +3338,18 @@
+ int main(){nm_test_var='a';nm_test_func();return(0);}
+ EOF
+
+- if { (eval echo configure:2156: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
++ if { (eval echo "$as_me:3341: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:3344: \$? = $ac_status" >&5
++ (exit $ac_status); }; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+- if { (eval echo configure:2159: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5; } && test -s "$nlist"; then
++ if { (eval echo "$as_me:3348: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
++ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
++ ac_status=$?
++ echo "$as_me:3351: \$? = $ac_status" >&5
++ (exit $ac_status); } && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+@@ -2206,7 +3400,11 @@
+ save_CFLAGS="$CFLAGS"
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$no_builtin_flag"
+- if { (eval echo configure:2210: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
++ if { (eval echo "$as_me:3403: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:3406: \$? = $ac_status" >&5
++ (exit $ac_status); } && test -s conftest; then
+ pipe_works=yes
+ fi
+ LIBS="$save_LIBS"
+@@ -2243,63 +3441,69 @@
+ global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
+ fi
+ if test -z "$global_symbol_pipe$global_symbol_to_cdecl"; then
+- echo "$ac_t""failed" 1>&6
++ echo "$as_me:3444: result: failed" >&5
++echo "${ECHO_T}failed" >&6
+ else
+- echo "$ac_t""ok" 1>&6
++ echo "$as_me:3447: result: ok" >&5
++echo "${ECHO_T}ok" >&6
+ fi
+
+-for ac_hdr in dlfcn.h
++for ac_header in dlfcn.h
+ do
+-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+-echo "configure:2256: checking for $ac_hdr" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
++echo "$as_me:3454: checking for $ac_header" >&5
++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
++if eval "test \"\${$as_ac_Header+set}\" = set"; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 2261 "configure"
++ cat >conftest.$ac_ext <<_ACEOF
++#line 3460 "configure"
+ #include "confdefs.h"
+-#include <$ac_hdr>
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:2266: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+-if test -z "$ac_err"; then
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=yes"
++#include <$ac_header>
++_ACEOF
++if { (eval echo "$as_me:3464: \"$ac_cpp conftest.$ac_ext\"") >&5
++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++ ac_status=$?
++ egrep -v '^ *\+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:3470: \$? = $ac_status" >&5
++ (exit $ac_status); } >/dev/null; then
++ if test -s conftest.err; then
++ ac_cpp_err=$ac_c_preproc_warn_flag
++ else
++ ac_cpp_err=
++ fi
+ else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
++ ac_cpp_err=yes
++fi
++if test -z "$ac_cpp_err"; then
++ eval "$as_ac_Header=yes"
++else
++ echo "$as_me: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=no"
++ eval "$as_ac_Header=no"
+ fi
+-rm -f conftest*
++rm -f conftest.err conftest.$ac_ext
+ fi
+-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_hdr 1
++echo "$as_me:3489: result: `eval echo '${'$as_ac_Header'}'`" >&5
++echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
++if test `eval echo '${'$as_ac_Header'}'` = yes; then
++ cat >>confdefs.h <<EOF
++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+ EOF
+-
+-else
+- echo "$ac_t""no" 1>&6
++
+ fi
+ done
+
+-
+-
+-
+-
+ # Only perform the check for file, if the check method requires it
+ case $deplibs_check_method in
+ file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+- echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
+-echo "configure:2301: checking for ${ac_tool_prefix}file" >&5
+-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:3503: checking for ${ac_tool_prefix}file" >&5
++echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ case $MAGIC_CMD in
+ /*)
+@@ -2351,17 +3555,19 @@
+
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if test -n "$MAGIC_CMD"; then
+- echo "$ac_t""$MAGIC_CMD" 1>&6
++ echo "$as_me:3558: result: $MAGIC_CMD" >&5
++echo "${ECHO_T}$MAGIC_CMD" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:3561: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
+ if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+- echo $ac_n "checking for file""... $ac_c" 1>&6
+-echo "configure:2363: checking for file" >&5
+-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:3567: checking for file" >&5
++echo $ECHO_N "checking for file... $ECHO_C" >&6
++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ case $MAGIC_CMD in
+ /*)
+@@ -2413,9 +3619,11 @@
+
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if test -n "$MAGIC_CMD"; then
+- echo "$ac_t""$MAGIC_CMD" 1>&6
++ echo "$as_me:3622: result: $MAGIC_CMD" >&5
++echo "${ECHO_T}$MAGIC_CMD" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:3625: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
+ else
+@@ -2427,150 +3635,162 @@
+ ;;
+ esac
+
+-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:2434: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:3641: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_RANLIB+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
++ ac_save_IFS=$IFS; IFS=$ac_path_separator
++ac_dummy="$PATH"
++for ac_dir in $ac_dummy; do
++ IFS=$ac_save_IFS
++ test -z "$ac_dir" && ac_dir=.
++ $as_executable_p "$ac_dir/$ac_word" || continue
++ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
++echo "$as_me:3656: found $ac_dir/$ac_word" >&5
++break
++done
++
+ fi
+ fi
+-RANLIB="$ac_cv_prog_RANLIB"
++RANLIB=$ac_cv_prog_RANLIB
+ if test -n "$RANLIB"; then
+- echo "$ac_t""$RANLIB" 1>&6
++ echo "$as_me:3664: result: $RANLIB" >&5
++echo "${ECHO_T}$RANLIB" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:3667: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
+-
++fi
+ if test -z "$ac_cv_prog_RANLIB"; then
+-if test -n "$ac_tool_prefix"; then
++ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+ set dummy ranlib; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:2466: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- if test -n "$RANLIB"; then
+- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+-else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_prog_RANLIB="ranlib"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
+- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
++echo "$as_me:3676: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$ac_ct_RANLIB"; then
++ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
++else
++ ac_save_IFS=$IFS; IFS=$ac_path_separator
++ac_dummy="$PATH"
++for ac_dir in $ac_dummy; do
++ IFS=$ac_save_IFS
++ test -z "$ac_dir" && ac_dir=.
++ $as_executable_p "$ac_dir/$ac_word" || continue
++ac_cv_prog_ac_ct_RANLIB="ranlib"
++echo "$as_me:3691: found $ac_dir/$ac_word" >&5
++break
++done
++
++ test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
+ fi
+ fi
+-RANLIB="$ac_cv_prog_RANLIB"
+-if test -n "$RANLIB"; then
+- echo "$ac_t""$RANLIB" 1>&6
++ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
++if test -n "$ac_ct_RANLIB"; then
++ echo "$as_me:3700: result: $ac_ct_RANLIB" >&5
++echo "${ECHO_T}$ac_ct_RANLIB" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:3703: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
++ RANLIB=$ac_ct_RANLIB
+ else
+- RANLIB=":"
+-fi
++ RANLIB="$ac_cv_prog_RANLIB"
+ fi
+
+-# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}strip; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:2501: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:3715: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_STRIP+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
++ ac_save_IFS=$IFS; IFS=$ac_path_separator
++ac_dummy="$PATH"
++for ac_dir in $ac_dummy; do
++ IFS=$ac_save_IFS
++ test -z "$ac_dir" && ac_dir=.
++ $as_executable_p "$ac_dir/$ac_word" || continue
++ac_cv_prog_STRIP="${ac_tool_prefix}strip"
++echo "$as_me:3730: found $ac_dir/$ac_word" >&5
++break
++done
++
+ fi
+ fi
+-STRIP="$ac_cv_prog_STRIP"
++STRIP=$ac_cv_prog_STRIP
+ if test -n "$STRIP"; then
+- echo "$ac_t""$STRIP" 1>&6
++ echo "$as_me:3738: result: $STRIP" >&5
++echo "${ECHO_T}$STRIP" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:3741: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
+-
++fi
+ if test -z "$ac_cv_prog_STRIP"; then
+-if test -n "$ac_tool_prefix"; then
++ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+ set dummy strip; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:2533: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- if test -n "$STRIP"; then
+- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+-else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_prog_STRIP="strip"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
+- test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
++echo "$as_me:3750: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$ac_ct_STRIP"; then
++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
++else
++ ac_save_IFS=$IFS; IFS=$ac_path_separator
++ac_dummy="$PATH"
++for ac_dir in $ac_dummy; do
++ IFS=$ac_save_IFS
++ test -z "$ac_dir" && ac_dir=.
++ $as_executable_p "$ac_dir/$ac_word" || continue
++ac_cv_prog_ac_ct_STRIP="strip"
++echo "$as_me:3765: found $ac_dir/$ac_word" >&5
++break
++done
++
++ test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+ fi
+ fi
+-STRIP="$ac_cv_prog_STRIP"
+-if test -n "$STRIP"; then
+- echo "$ac_t""$STRIP" 1>&6
++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
++if test -n "$ac_ct_STRIP"; then
++ echo "$as_me:3774: result: $ac_ct_STRIP" >&5
++echo "${ECHO_T}$ac_ct_STRIP" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:3777: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
++ STRIP=$ac_ct_STRIP
+ else
+- STRIP=":"
+-fi
++ STRIP="$ac_cv_prog_STRIP"
+ fi
+
+-
+ enable_dlopen=no
+ enable_win32_dll=no
+
+ # Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+ if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+- :
+-fi
+
++fi;
+ test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+ # Some flags need to be propagated to the compiler or linker for good
+@@ -2578,8 +3798,12 @@
+ case $host in
+ *-*-irix6*)
+ # Find out which ABI we are using.
+- echo '#line 2582 "configure"' > conftest.$ac_ext
+- if { (eval echo configure:2583: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
++ echo '#line 3801 "configure"' > conftest.$ac_ext
++ if { (eval echo "$as_me:3802: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:3805: \$? = $ac_status" >&5
++ (exit $ac_status); }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+@@ -2599,54 +3823,64 @@
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+- echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
+-echo "configure:2604: checking whether the C compiler needs -belf" >&5
+-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:3826: checking whether the C compiler needs -belf" >&5
++echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
++if test "${lt_cv_cc_needs_belf+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+-
++
+ ac_ext=c
+-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+-cross_compiling=$ac_cv_prog_cc_cross
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+- cat > conftest.$ac_ext <<EOF
+-#line 2617 "configure"
++ cat >conftest.$ac_ext <<_ACEOF
++#line 3839 "configure"
+ #include "confdefs.h"
+
+-int main() {
++int
++main ()
++{
+
+-; return 0; }
+-EOF
+-if { (eval echo configure:2624: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+- rm -rf conftest*
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:3851: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:3854: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest$ac_exeext'
++ { (eval echo "$as_me:3857: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:3860: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
+ lt_cv_cc_needs_belf=yes
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- lt_cv_cc_needs_belf=no
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++lt_cv_cc_needs_belf=no
+ fi
+-rm -f conftest*
++rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+ ac_ext=c
+-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+-cross_compiling=$ac_cv_prog_cc_cross
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ fi
+-
+-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
++echo "$as_me:3876: result: $lt_cv_cc_needs_belf" >&5
++echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+
+-
+ esac
+
+ # Sed substitution that helps us do robust quoting. It backslashifies
+@@ -2732,8 +3966,8 @@
+ set dummy $CC
+ compiler="$2"
+
+-echo $ac_n "checking for objdir""... $ac_c" 1>&6
+-echo "configure:2737: checking for objdir" >&5
++echo "$as_me:3969: checking for objdir" >&5
++echo $ECHO_N "checking for objdir... $ECHO_C" >&6
+ rm -f .libs 2>/dev/null
+ mkdir .libs 2>/dev/null
+ if test -d .libs; then
+@@ -2743,8 +3977,8 @@
+ objdir=_libs
+ fi
+ rmdir .libs 2>/dev/null
+-echo "$ac_t""$objdir" 1>&6
+-
++echo "$as_me:3980: result: $objdir" >&5
++echo "${ECHO_T}$objdir" >&6
+
+ # Check whether --with-pic or --without-pic was given.
+ if test "${with_pic+set}" = set; then
+@@ -2752,17 +3986,16 @@
+ pic_mode="$withval"
+ else
+ pic_mode=default
+-fi
+-
++fi;
+ test -z "$pic_mode" && pic_mode=default
+
+ # We assume here that the value for lt_cv_prog_cc_pic will not be cached
+ # in isolation, and that seeing it set (from the cache) indicates that
+ # the associated values are set (in the cache) correctly too.
+-echo $ac_n "checking for $compiler option to produce PIC""... $ac_c" 1>&6
+-echo "configure:2764: checking for $compiler option to produce PIC" >&5
+-if eval "test \"`echo '$''{'lt_cv_prog_cc_pic'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:3995: checking for $compiler option to produce PIC" >&5
++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
++if test "${lt_cv_prog_cc_pic+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_prog_cc_pic=
+ lt_cv_prog_cc_shlib=
+@@ -2906,28 +4139,44 @@
+ fi
+
+ if test -z "$lt_cv_prog_cc_pic"; then
+- echo "$ac_t""none" 1>&6
++ echo "$as_me:4142: result: none" >&5
++echo "${ECHO_T}none" >&6
+ else
+- echo "$ac_t""$lt_cv_prog_cc_pic" 1>&6
++ echo "$as_me:4145: result: $lt_cv_prog_cc_pic" >&5
++echo "${ECHO_T}$lt_cv_prog_cc_pic" >&6
+
+ # Check to make sure the pic_flag actually works.
+- echo $ac_n "checking if $compiler PIC flag $lt_cv_prog_cc_pic works""... $ac_c" 1>&6
+-echo "configure:2916: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
+- if eval "test \"`echo '$''{'lt_cv_prog_cc_pic_works'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:4149: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
++echo $ECHO_N "checking if $compiler PIC flag $lt_cv_prog_cc_pic works... $ECHO_C" >&6
++ if test "${lt_cv_prog_cc_pic_works+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
+- cat > conftest.$ac_ext <<EOF
+-#line 2923 "configure"
++ cat >conftest.$ac_ext <<_ACEOF
++#line 4157 "configure"
+ #include "confdefs.h"
+
+-int main() {
++int
++main ()
++{
+
+-; return 0; }
+-EOF
+-if { (eval echo configure:2930: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- rm -rf conftest*
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:4169: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:4172: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:4175: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:4178: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
+ case $host_os in
+ hpux9* | hpux10* | hpux11*)
+ # On HP-UX, both CC and GCC only warn that PIC is supported... then
+@@ -2943,19 +4192,17 @@
+ lt_cv_prog_cc_pic_works=yes
+ ;;
+ esac
+-
++
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- lt_cv_prog_cc_pic_works=no
+-
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ lt_cv_prog_cc_pic_works=no
++
+ fi
+-rm -f conftest*
++rm -f conftest.$ac_objext conftest.$ac_ext
+ CFLAGS="$save_CFLAGS"
+-
+-fi
+
++fi
+
+ if test "X$lt_cv_prog_cc_pic_works" = Xno; then
+ lt_cv_prog_cc_pic=
+@@ -2964,51 +4211,68 @@
+ lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
+ fi
+
+- echo "$ac_t""$lt_cv_prog_cc_pic_works" 1>&6
++ echo "$as_me:4214: result: $lt_cv_prog_cc_pic_works" >&5
++echo "${ECHO_T}$lt_cv_prog_cc_pic_works" >&6
+ fi
+
+ # Check for any special shared library compilation flags.
+ if test -n "$lt_cv_prog_cc_shlib"; then
+- echo "configure: warning: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" 1>&2
++ { echo "$as_me:4220: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&5
++echo "$as_me: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&2;}
+ if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]" >/dev/null; then :
+ else
+- echo "configure: warning: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" 1>&2
++ { echo "$as_me:4224: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5
++echo "$as_me: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;}
+ lt_cv_prog_cc_can_build_shared=no
+ fi
+ fi
+
+-echo $ac_n "checking if $compiler static flag $lt_cv_prog_cc_static works""... $ac_c" 1>&6
+-echo "configure:2982: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
+-if eval "test \"`echo '$''{'lt_cv_prog_cc_static_works'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:4230: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
++echo $ECHO_N "checking if $compiler static flag $lt_cv_prog_cc_static works... $ECHO_C" >&6
++if test "${lt_cv_prog_cc_static_works+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_prog_cc_static_works=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
+- cat > conftest.$ac_ext <<EOF
+-#line 2990 "configure"
++ cat >conftest.$ac_ext <<_ACEOF
++#line 4239 "configure"
+ #include "confdefs.h"
+
+-int main() {
++int
++main ()
++{
+
+-; return 0; }
+-EOF
+-if { (eval echo configure:2997: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+- rm -rf conftest*
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:4251: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:4254: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest$ac_exeext'
++ { (eval echo "$as_me:4257: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:4260: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
+ lt_cv_prog_cc_static_works=yes
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
+ fi
+-rm -f conftest*
++rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+
+ fi
+
+-
+ # Belt *and* braces to stop my trousers falling down:
+ test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
+-echo "$ac_t""$lt_cv_prog_cc_static_works" 1>&6
++echo "$as_me:4274: result: $lt_cv_prog_cc_static_works" >&5
++echo "${ECHO_T}$lt_cv_prog_cc_static_works" >&6
+
+ pic_flag="$lt_cv_prog_cc_pic"
+ special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
+@@ -3017,14 +4281,13 @@
+ no_builtin_flag="$lt_cv_prog_cc_no_builtin"
+ can_build_shared="$lt_cv_prog_cc_can_build_shared"
+
+-
+ # Check to see if options -o and -c are simultaneously supported by compiler
+-echo $ac_n "checking if $compiler supports -c -o file.$ac_objext""... $ac_c" 1>&6
+-echo "configure:3024: checking if $compiler supports -c -o file.$ac_objext" >&5
+-if eval "test \"`echo '$''{'lt_cv_compiler_c_o'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:4285: checking if $compiler supports -c -o file.$ac_objext" >&5
++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
++if test "${lt_cv_compiler_c_o+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+-
++
+ $rm -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+@@ -3039,7 +4302,7 @@
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
+ compiler_c_o=no
+-if { (eval echo configure:3043: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
++if { (eval echo configure:4305: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s out/conftest.err; then
+@@ -3063,29 +4326,44 @@
+ fi
+
+ compiler_c_o=$lt_cv_compiler_c_o
+-echo "$ac_t""$compiler_c_o" 1>&6
++echo "$as_me:4329: result: $compiler_c_o" >&5
++echo "${ECHO_T}$compiler_c_o" >&6
+
+ if test x"$compiler_c_o" = x"yes"; then
+ # Check to see if we can write to a .lo
+- echo $ac_n "checking if $compiler supports -c -o file.lo""... $ac_c" 1>&6
+-echo "configure:3072: checking if $compiler supports -c -o file.lo" >&5
+- if eval "test \"`echo '$''{'lt_cv_compiler_o_lo'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:4334: checking if $compiler supports -c -o file.lo" >&5
++echo $ECHO_N "checking if $compiler supports -c -o file.lo... $ECHO_C" >&6
++ if test "${lt_cv_compiler_o_lo+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+-
++
+ lt_cv_compiler_o_lo=no
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -c -o conftest.lo"
+- cat > conftest.$ac_ext <<EOF
+-#line 3081 "configure"
++ cat >conftest.$ac_ext <<_ACEOF
++#line 4344 "configure"
+ #include "confdefs.h"
+
+-int main() {
++int
++main ()
++{
+ int some_variable = 0;
+-; return 0; }
+-EOF
+-if { (eval echo configure:3088: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- rm -rf conftest*
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:4356: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:4359: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:4362: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:4365: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+@@ -3093,18 +4371,19 @@
+ else
+ lt_cv_compiler_o_lo=yes
+ fi
+-
++
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
+ fi
+-rm -f conftest*
++rm -f conftest.$ac_objext conftest.$ac_ext
+ CFLAGS="$save_CFLAGS"
+-
++
+ fi
+
+ compiler_o_lo=$lt_cv_compiler_o_lo
+- echo "$ac_t""$compiler_c_lo" 1>&6
++ echo "$as_me:4385: result: $compiler_c_lo" >&5
++echo "${ECHO_T}$compiler_c_lo" >&6
+ else
+ compiler_o_lo=no
+ fi
+@@ -3113,17 +4392,19 @@
+ hard_links="nottested"
+ if test "$compiler_c_o" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+- echo $ac_n "checking if we can lock with hard links""... $ac_c" 1>&6
+-echo "configure:3118: checking if we can lock with hard links" >&5
++ echo "$as_me:4395: checking if we can lock with hard links" >&5
++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+ hard_links=yes
+ $rm conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+- echo "$ac_t""$hard_links" 1>&6
++ echo "$as_me:4403: result: $hard_links" >&5
++echo "${ECHO_T}$hard_links" >&6
+ if test "$hard_links" = no; then
+- echo "configure: warning: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" 1>&2
++ { echo "$as_me:4406: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+ else
+@@ -3132,22 +4413,36 @@
+
+ if test "$GCC" = yes; then
+ # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
+- echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions""... $ac_c" 1>&6
+-echo "configure:3137: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
++ echo "$as_me:4416: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
+ compiler_rtti_exceptions=no
+- cat > conftest.$ac_ext <<EOF
+-#line 3143 "configure"
++ cat >conftest.$ac_ext <<_ACEOF
++#line 4423 "configure"
+ #include "confdefs.h"
+
+-int main() {
++int
++main ()
++{
+ int some_variable = 0;
+-; return 0; }
+-EOF
+-if { (eval echo configure:3150: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- rm -rf conftest*
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:4435: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:4438: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:4441: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:4444: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+@@ -3155,14 +4450,15 @@
+ else
+ compiler_rtti_exceptions=yes
+ fi
+-
++
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
+ fi
+-rm -f conftest*
++rm -f conftest.$ac_objext conftest.$ac_ext
+ CFLAGS="$save_CFLAGS"
+- echo "$ac_t""$compiler_rtti_exceptions" 1>&6
++ echo "$as_me:4460: result: $compiler_rtti_exceptions" >&5
++echo "${ECHO_T}$compiler_rtti_exceptions" >&6
+
+ if test "$compiler_rtti_exceptions" = "yes"; then
+ no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
+@@ -3172,8 +4468,8 @@
+ fi
+
+ # See if the linker supports building shared libraries.
+-echo $ac_n "checking whether the linker ($LD) supports shared libraries""... $ac_c" 1>&6
+-echo "configure:3177: checking whether the linker ($LD) supports shared libraries" >&5
++echo "$as_me:4471: checking whether the linker ($LD) supports shared libraries" >&5
++echo $ECHO_N "checking whether the linker ($LD) supports shared libraries... $ECHO_C" >&6
+
+ allow_undefined_flag=
+ no_undefined_flag=
+@@ -3539,7 +4835,7 @@
+ ;;
+
+ darwin* | rhapsody*)
+- allow_undefined_flag='-undefined suppress'
++ allow_undefined_flag='-undefined error'
+ # FIXME: Relying on posixy $() will cause problems for
+ # cross-compilation, but unfortunately the echo tests do not
+ # yet detect zsh echo's removal of \ escapes.
+@@ -3784,12 +5080,13 @@
+ ;;
+ esac
+ fi
+-echo "$ac_t""$ld_shlibs" 1>&6
++echo "$as_me:5083: result: $ld_shlibs" >&5
++echo "${ECHO_T}$ld_shlibs" >&6
+ test "$ld_shlibs" = no && can_build_shared=no
+
+ # Check hardcoding attributes.
+-echo $ac_n "checking how to hardcode library paths into programs""... $ac_c" 1>&6
+-echo "configure:3793: checking how to hardcode library paths into programs" >&5
++echo "$as_me:5088: checking how to hardcode library paths into programs" >&5
++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+ hardcode_action=
+ if test -n "$hardcode_libdir_flag_spec" || \
+ test -n "$runpath_var"; then
+@@ -3812,26 +5109,29 @@
+ # directories.
+ hardcode_action=unsupported
+ fi
+-echo "$ac_t""$hardcode_action" 1>&6
++echo "$as_me:5112: result: $hardcode_action" >&5
++echo "${ECHO_T}$hardcode_action" >&6
+
+ striplib=
+ old_striplib=
+-echo $ac_n "checking whether stripping libraries is possible""... $ac_c" 1>&6
+-echo "configure:3821: checking whether stripping libraries is possible" >&5
++echo "$as_me:5117: checking whether stripping libraries is possible" >&5
++echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
+ if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+- echo "$ac_t""yes" 1>&6
++ echo "$as_me:5122: result: yes" >&5
++echo "${ECHO_T}yes" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:5125: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+ # PORTME Fill in your ld.so characteristics
+-echo $ac_n "checking dynamic linker characteristics""... $ac_c" 1>&6
+-echo "configure:3835: checking dynamic linker characteristics" >&5
++echo "$as_me:5133: checking dynamic linker characteristics" >&5
++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+ library_names_spec=
+ libname_spec='lib$name'
+ soname_spec=
+@@ -4212,13 +5512,15 @@
+ dynamic_linker=no
+ ;;
+ esac
+-echo "$ac_t""$dynamic_linker" 1>&6
++echo "$as_me:5515: result: $dynamic_linker" >&5
++echo "${ECHO_T}$dynamic_linker" >&6
+ test "$dynamic_linker" = no && can_build_shared=no
+
+ # Report the final consequences.
+-echo $ac_n "checking if libtool supports shared libraries""... $ac_c" 1>&6
+-echo "configure:4221: checking if libtool supports shared libraries" >&5
+-echo "$ac_t""$can_build_shared" 1>&6
++echo "$as_me:5520: checking if libtool supports shared libraries" >&5
++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
++echo "$as_me:5522: result: $can_build_shared" >&5
++echo "${ECHO_T}$can_build_shared" >&6
+
+ if test "$hardcode_action" = relink; then
+ # Fast installation is not supported
+@@ -4255,224 +5557,291 @@
+ ;;
+
+ *)
+- echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
+-echo "configure:4260: checking for dlopen in -ldl" >&5
+-ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:5560: checking for dlopen in -ldl" >&5
++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
++if test "${ac_cv_lib_dl_dlopen+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- ac_save_LIBS="$LIBS"
++ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-ldl $LIBS"
+-cat > conftest.$ac_ext <<EOF
+-#line 4268 "configure"
++cat >conftest.$ac_ext <<_ACEOF
++#line 5568 "configure"
+ #include "confdefs.h"
++
+ /* Override any gcc2 internal prototype to avoid an error. */
++#ifdef __cplusplus
++extern "C"
++#endif
+ /* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char dlopen();
+-
+-int main() {
+-dlopen()
+-; return 0; }
+-EOF
+-if { (eval echo configure:4279: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=no"
+-fi
+-rm -f conftest*
+-LIBS="$ac_save_LIBS"
+-
+-fi
+-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
++ builtin and then its argument prototype would still apply. */
++char dlopen ();
++int
++main ()
++{
++dlopen ();
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:5587: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:5590: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest$ac_exeext'
++ { (eval echo "$as_me:5593: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:5596: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_lib_dl_dlopen=yes
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_cv_lib_dl_dlopen=no
++fi
++rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++echo "$as_me:5607: result: $ac_cv_lib_dl_dlopen" >&5
++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
++if test $ac_cv_lib_dl_dlopen = yes; then
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+ else
+- echo "$ac_t""no" 1>&6
+-echo $ac_n "checking for dlopen""... $ac_c" 1>&6
+-echo "configure:4298: checking for dlopen" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:5612: checking for dlopen" >&5
++echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
++if test "${ac_cv_func_dlopen+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 4303 "configure"
++ cat >conftest.$ac_ext <<_ACEOF
++#line 5618 "configure"
+ #include "confdefs.h"
+ /* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char dlopen(); below. */
++ which can conflict with char dlopen (); below. */
+ #include <assert.h>
+ /* Override any gcc2 internal prototype to avoid an error. */
++#ifdef __cplusplus
++extern "C"
++#endif
+ /* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char dlopen();
+-
+-int main() {
++ builtin and then its argument prototype would still apply. */
++char dlopen ();
++char (*f) ();
+
++int
++main ()
++{
+ /* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+ #if defined (__stub_dlopen) || defined (__stub___dlopen)
+ choke me
+ #else
+-dlopen();
++f = dlopen;
+ #endif
+
+-; return 0; }
+-EOF
+-if { (eval echo configure:4326: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+- rm -rf conftest*
+- eval "ac_cv_func_dlopen=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_func_dlopen=no"
+-fi
+-rm -f conftest*
+-fi
+-
+-if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:5649: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:5652: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest$ac_exeext'
++ { (eval echo "$as_me:5655: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:5658: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_func_dlopen=yes
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_cv_func_dlopen=no
++fi
++rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++fi
++echo "$as_me:5668: result: $ac_cv_func_dlopen" >&5
++echo "${ECHO_T}$ac_cv_func_dlopen" >&6
++if test $ac_cv_func_dlopen = yes; then
+ lt_cv_dlopen="dlopen"
+ else
+- echo "$ac_t""no" 1>&6
+-echo $ac_n "checking for shl_load""... $ac_c" 1>&6
+-echo "configure:4344: checking for shl_load" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:5673: checking for shl_load" >&5
++echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
++if test "${ac_cv_func_shl_load+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 4349 "configure"
++ cat >conftest.$ac_ext <<_ACEOF
++#line 5679 "configure"
+ #include "confdefs.h"
+ /* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char shl_load(); below. */
++ which can conflict with char shl_load (); below. */
+ #include <assert.h>
+ /* Override any gcc2 internal prototype to avoid an error. */
++#ifdef __cplusplus
++extern "C"
++#endif
+ /* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char shl_load();
+-
+-int main() {
++ builtin and then its argument prototype would still apply. */
++char shl_load ();
++char (*f) ();
+
++int
++main ()
++{
+ /* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+ #if defined (__stub_shl_load) || defined (__stub___shl_load)
+ choke me
+ #else
+-shl_load();
++f = shl_load;
+ #endif
+
+-; return 0; }
+-EOF
+-if { (eval echo configure:4372: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+- rm -rf conftest*
+- eval "ac_cv_func_shl_load=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_func_shl_load=no"
+-fi
+-rm -f conftest*
+-fi
+-
+-if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:5710: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:5713: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest$ac_exeext'
++ { (eval echo "$as_me:5716: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:5719: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_func_shl_load=yes
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_cv_func_shl_load=no
++fi
++rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++fi
++echo "$as_me:5729: result: $ac_cv_func_shl_load" >&5
++echo "${ECHO_T}$ac_cv_func_shl_load" >&6
++if test $ac_cv_func_shl_load = yes; then
+ lt_cv_dlopen="shl_load"
+ else
+- echo "$ac_t""no" 1>&6
+-echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6
+-echo "configure:4390: checking for dlopen in -lsvld" >&5
+-ac_lib_var=`echo svld'_'dlopen | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:5734: checking for dlopen in -lsvld" >&5
++echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
++if test "${ac_cv_lib_svld_dlopen+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- ac_save_LIBS="$LIBS"
++ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-lsvld $LIBS"
+-cat > conftest.$ac_ext <<EOF
+-#line 4398 "configure"
++cat >conftest.$ac_ext <<_ACEOF
++#line 5742 "configure"
+ #include "confdefs.h"
++
+ /* Override any gcc2 internal prototype to avoid an error. */
++#ifdef __cplusplus
++extern "C"
++#endif
+ /* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char dlopen();
+-
+-int main() {
+-dlopen()
+-; return 0; }
+-EOF
+-if { (eval echo configure:4409: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=no"
+-fi
+-rm -f conftest*
+-LIBS="$ac_save_LIBS"
+-
+-fi
+-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
++ builtin and then its argument prototype would still apply. */
++char dlopen ();
++int
++main ()
++{
++dlopen ();
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:5761: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:5764: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest$ac_exeext'
++ { (eval echo "$as_me:5767: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:5770: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_lib_svld_dlopen=yes
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_cv_lib_svld_dlopen=no
++fi
++rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++echo "$as_me:5781: result: $ac_cv_lib_svld_dlopen" >&5
++echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
++if test $ac_cv_lib_svld_dlopen = yes; then
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+ else
+- echo "$ac_t""no" 1>&6
+-echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
+-echo "configure:4428: checking for shl_load in -ldld" >&5
+-ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:5786: checking for shl_load in -ldld" >&5
++echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
++if test "${ac_cv_lib_dld_shl_load+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- ac_save_LIBS="$LIBS"
++ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-ldld $LIBS"
+-cat > conftest.$ac_ext <<EOF
+-#line 4436 "configure"
++cat >conftest.$ac_ext <<_ACEOF
++#line 5794 "configure"
+ #include "confdefs.h"
++
+ /* Override any gcc2 internal prototype to avoid an error. */
++#ifdef __cplusplus
++extern "C"
++#endif
+ /* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char shl_load();
+-
+-int main() {
+-shl_load()
+-; return 0; }
+-EOF
+-if { (eval echo configure:4447: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=no"
+-fi
+-rm -f conftest*
+-LIBS="$ac_save_LIBS"
+-
+-fi
+-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
++ builtin and then its argument prototype would still apply. */
++char shl_load ();
++int
++main ()
++{
++shl_load ();
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:5813: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:5816: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest$ac_exeext'
++ { (eval echo "$as_me:5819: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:5822: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_lib_dld_shl_load=yes
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_cv_lib_dld_shl_load=no
++fi
++rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++echo "$as_me:5833: result: $ac_cv_lib_dld_shl_load" >&5
++echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
++if test $ac_cv_lib_dld_shl_load = yes; then
+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
+-else
+- echo "$ac_t""no" 1>&6
+ fi
+
+-
+ fi
+
+-
+ fi
+
+-
+ fi
+
+-
+ fi
+
+ ;;
+@@ -4495,10 +5864,10 @@
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+- echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
+-echo "configure:4500: checking whether a program can dlopen itself" >&5
+-if eval "test \"`echo '$''{'lt_cv_dlopen_self'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:5867: checking whether a program can dlopen itself" >&5
++echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
++if test "${lt_cv_dlopen_self+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self=cross
+@@ -4506,7 +5875,7 @@
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<EOF
+-#line 4510 "configure"
++#line 5878 "configure"
+ #include "confdefs.h"
+
+ #if HAVE_DLFCN_H
+@@ -4567,7 +5936,11 @@
+ exit (status);
+ }
+ EOF
+- if { (eval echo configure:4571: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
++ if { (eval echo "$as_me:5939: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:5942: \$? = $ac_status" >&5
++ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+@@ -4582,17 +5955,16 @@
+ fi
+ rm -fr conftest*
+
+-
+ fi
+-
+-echo "$ac_t""$lt_cv_dlopen_self" 1>&6
++echo "$as_me:5959: result: $lt_cv_dlopen_self" >&5
++echo "${ECHO_T}$lt_cv_dlopen_self" >&6
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ LDFLAGS="$LDFLAGS $link_static_flag"
+- echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
+-echo "configure:4594: checking whether a statically linked program can dlopen itself" >&5
+-if eval "test \"`echo '$''{'lt_cv_dlopen_self_static'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:5964: checking whether a statically linked program can dlopen itself" >&5
++echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
++if test "${lt_cv_dlopen_self_static+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self_static=cross
+@@ -4600,7 +5972,7 @@
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<EOF
+-#line 4604 "configure"
++#line 5975 "configure"
+ #include "confdefs.h"
+
+ #if HAVE_DLFCN_H
+@@ -4661,7 +6033,11 @@
+ exit (status);
+ }
+ EOF
+- if { (eval echo configure:4665: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
++ if { (eval echo "$as_me:6036: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:6039: \$? = $ac_status" >&5
++ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+@@ -4676,10 +6052,9 @@
+ fi
+ rm -fr conftest*
+
+-
+ fi
+-
+-echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
++echo "$as_me:6056: result: $lt_cv_dlopen_self_static" >&5
++echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+@@ -4699,7 +6074,6 @@
+ esac
+ fi
+
+-
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $archive_cmds in
+ *'~'*)
+@@ -4709,15 +6083,19 @@
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+- echo $ac_n "checking whether -lc should be explicitly linked in""... $ac_c" 1>&6
+-echo "configure:4714: checking whether -lc should be explicitly linked in" >&5
+- if eval "test \"`echo '$''{'lt_cv_archive_cmds_need_lc'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:6086: checking whether -lc should be explicitly linked in" >&5
++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
++ if test "${lt_cv_archive_cmds_need_lc+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ $rm conftest*
+ echo 'static int dummy;' > conftest.$ac_ext
+
+- if { (eval echo configure:4721: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
++ if { (eval echo "$as_me:6094: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:6097: \$? = $ac_status" >&5
++ (exit $ac_status); }; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+@@ -4730,7 +6108,11 @@
+ libname=conftest
+ save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+- if { (eval echo configure:4734: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\") 1>&5; (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5; }
++ if { (eval echo "$as_me:6111: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
++ (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
++ ac_status=$?
++ echo "$as_me:6114: \$? = $ac_status" >&5
++ (exit $ac_status); }
+ then
+ lt_cv_archive_cmds_need_lc=no
+ else
+@@ -4742,7 +6124,8 @@
+ fi
+ fi
+
+- echo "$ac_t""$lt_cv_archive_cmds_need_lc" 1>&6
++ echo "$as_me:6127: result: $lt_cv_archive_cmds_need_lc" >&5
++echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6
+ ;;
+ esac
+ fi
+@@ -5294,10 +6677,6 @@
+ chmod +x "$ofile"
+ fi
+
+-
+-
+-
+-
+ # This can be used to rebuild libtool when needed
+ LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+
+@@ -5306,49 +6685,57 @@
+
+ # Prevent multiple expansion
+
+-
+-
+-
+-echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
+-echo "configure:5314: checking for ANSI C header files" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:6688: checking for ANSI C header files" >&5
++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
++if test "${ac_cv_header_stdc+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 5319 "configure"
++ cat >conftest.$ac_ext <<_ACEOF
++#line 6694 "configure"
+ #include "confdefs.h"
+ #include <stdlib.h>
+ #include <stdarg.h>
+ #include <string.h>
+ #include <float.h>
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:5327: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+-if test -z "$ac_err"; then
+- rm -rf conftest*
++
++_ACEOF
++if { (eval echo "$as_me:6702: \"$ac_cpp conftest.$ac_ext\"") >&5
++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++ ac_status=$?
++ egrep -v '^ *\+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:6708: \$? = $ac_status" >&5
++ (exit $ac_status); } >/dev/null; then
++ if test -s conftest.err; then
++ ac_cpp_err=$ac_c_preproc_warn_flag
++ else
++ ac_cpp_err=
++ fi
++else
++ ac_cpp_err=yes
++fi
++if test -z "$ac_cpp_err"; then
+ ac_cv_header_stdc=yes
+ else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
++ echo "$as_me: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+- rm -rf conftest*
+ ac_cv_header_stdc=no
+ fi
+-rm -f conftest*
++rm -f conftest.err conftest.$ac_ext
+
+ if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+-cat > conftest.$ac_ext <<EOF
+-#line 5344 "configure"
++ cat >conftest.$ac_ext <<_ACEOF
++#line 6730 "configure"
+ #include "confdefs.h"
+ #include <string.h>
+-EOF
++
++_ACEOF
+ if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "memchr" >/dev/null 2>&1; then
+ :
+ else
+- rm -rf conftest*
+ ac_cv_header_stdc=no
+ fi
+ rm -f conftest*
+@@ -5357,16 +6744,16 @@
+
+ if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+-cat > conftest.$ac_ext <<EOF
+-#line 5362 "configure"
++ cat >conftest.$ac_ext <<_ACEOF
++#line 6748 "configure"
+ #include "confdefs.h"
+ #include <stdlib.h>
+-EOF
++
++_ACEOF
+ if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "free" >/dev/null 2>&1; then
+ :
+ else
+- rm -rf conftest*
+ ac_cv_header_stdc=no
+ fi
+ rm -f conftest*
+@@ -5375,166 +6762,825 @@
+
+ if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+-if test "$cross_compiling" = yes; then
++ if test "$cross_compiling" = yes; then
+ :
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 5383 "configure"
++ cat >conftest.$ac_ext <<_ACEOF
++#line 6769 "configure"
+ #include "confdefs.h"
+ #include <ctype.h>
+-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+-int main () { int i; for (i = 0; i < 256; i++)
+-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
+-exit (0); }
++#if ((' ' & 0x0FF) == 0x020)
++# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
++# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
++#else
++# define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \
++ || ('j' <= (c) && (c) <= 'r') \
++ || ('s' <= (c) && (c) <= 'z'))
++# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
++#endif
+
+-EOF
+-if { (eval echo configure:5394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+-then
++#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
++int
++main ()
++{
++ int i;
++ for (i = 0; i < 256; i++)
++ if (XOR (islower (i), ISLOWER (i))
++ || toupper (i) != TOUPPER (i))
++ exit(2);
++ exit (0);
++}
++_ACEOF
++rm -f conftest$ac_exeext
++if { (eval echo "$as_me:6795: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:6798: \$? = $ac_status" >&5
++ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
++ { (eval echo "$as_me:6800: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:6803: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
+ :
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -fr conftest*
+- ac_cv_header_stdc=no
++ echo "$as_me: program exited with status $ac_status" >&5
++echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_cv_header_stdc=no
+ fi
+-rm -fr conftest*
++rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+ fi
+-
+ fi
+ fi
+-
+-echo "$ac_t""$ac_cv_header_stdc" 1>&6
++echo "$as_me:6816: result: $ac_cv_header_stdc" >&5
++echo "${ECHO_T}$ac_cv_header_stdc" >&6
+ if test $ac_cv_header_stdc = yes; then
+- cat >> confdefs.h <<\EOF
++
++cat >>confdefs.h <<\EOF
+ #define STDC_HEADERS 1
+ EOF
+
+ fi
+
++# On IRIX 5.3, sys/types and inttypes.h are conflicting.
++
++for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
++ inttypes.h stdint.h unistd.h
++do
++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
++echo "$as_me:6832: checking for $ac_header" >&5
++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
++if eval "test \"\${$as_ac_Header+set}\" = set"; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ cat >conftest.$ac_ext <<_ACEOF
++#line 6838 "configure"
++#include "confdefs.h"
++$ac_includes_default
++#include <$ac_header>
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:6844: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:6847: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:6850: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:6853: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ eval "$as_ac_Header=yes"
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++eval "$as_ac_Header=no"
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++fi
++echo "$as_me:6863: result: `eval echo '${'$as_ac_Header'}'`" >&5
++echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
++if test `eval echo '${'$as_ac_Header'}'` = yes; then
++ cat >>confdefs.h <<EOF
++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
++EOF
+
++fi
++done
+
+-echo $ac_n "checking size of int""... $ac_c" 1>&6
+-echo "configure:5420: checking size of int" >&5
+-if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:6873: checking for int" >&5
++echo $ECHO_N "checking for int... $ECHO_C" >&6
++if test "${ac_cv_type_int+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ cat >conftest.$ac_ext <<_ACEOF
++#line 6879 "configure"
++#include "confdefs.h"
++$ac_includes_default
++int
++main ()
++{
++if ((int *) 0)
++ return 0;
++if (sizeof (int))
++ return 0;
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:6894: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:6897: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:6900: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:6903: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_type_int=yes
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_cv_type_int=no
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++fi
++echo "$as_me:6913: result: $ac_cv_type_int" >&5
++echo "${ECHO_T}$ac_cv_type_int" >&6
++
++echo "$as_me:6916: checking size of int" >&5
++echo $ECHO_N "checking size of int... $ECHO_C" >&6
++if test "${ac_cv_sizeof_int+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test "$ac_cv_type_int" = yes; then
++ if test "$cross_compiling" = yes; then
++ # Depending upon the size, compute the lo and hi bounds.
++cat >conftest.$ac_ext <<_ACEOF
++#line 6925 "configure"
++#include "confdefs.h"
++$ac_includes_default
++int
++main ()
++{
++int _array_ [1 - 2 * !((sizeof (int)) >= 0)]
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:6937: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:6940: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:6943: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:6946: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_lo=0 ac_mid=0
++ while :; do
++ cat >conftest.$ac_ext <<_ACEOF
++#line 6951 "configure"
++#include "confdefs.h"
++$ac_includes_default
++int
++main ()
++{
++int _array_ [1 - 2 * !((sizeof (int)) <= $ac_mid)]
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:6963: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:6966: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:6969: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:6972: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_hi=$ac_mid; break
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_lo=`expr $ac_mid + 1`; ac_mid=`expr 2 '*' $ac_mid + 1`
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++ done
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_hi=-1 ac_mid=-1
++ while :; do
++ cat >conftest.$ac_ext <<_ACEOF
++#line 6988 "configure"
++#include "confdefs.h"
++$ac_includes_default
++int
++main ()
++{
++int _array_ [1 - 2 * !((sizeof (int)) >= $ac_mid)]
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:7000: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:7003: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:7006: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:7009: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_lo=$ac_mid; break
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_hi=`expr $ac_mid - 1`; ac_mid=`expr 2 '*' $ac_mid`
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++ done
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++# Binary search between lo and hi bounds.
++while test "x$ac_lo" != "x$ac_hi"; do
++ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
++ cat >conftest.$ac_ext <<_ACEOF
++#line 7025 "configure"
++#include "confdefs.h"
++$ac_includes_default
++int
++main ()
++{
++int _array_ [1 - 2 * !((sizeof (int)) <= $ac_mid)]
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:7037: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:7040: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:7043: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:7046: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_hi=$ac_mid
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_lo=`expr $ac_mid + 1`
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++done
++ac_cv_sizeof_int=$ac_lo
+ else
+ if test "$cross_compiling" = yes; then
+- ac_cv_sizeof_int=2
++ { { echo "$as_me:7059: error: cannot run test program while cross compiling" >&5
++echo "$as_me: error: cannot run test program while cross compiling" >&2;}
++ { (exit 1); exit 1; }; }
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 5428 "configure"
++ cat >conftest.$ac_ext <<_ACEOF
++#line 7064 "configure"
+ #include "confdefs.h"
+-#include <stdio.h>
+-main()
++$ac_includes_default
++int
++main ()
+ {
+- FILE *f=fopen("conftestval", "w");
+- if (!f) exit(1);
+- fprintf(f, "%d\n", sizeof(int));
+- exit(0);
++FILE *f = fopen ("conftest.val", "w");
++if (!f)
++ exit (1);
++fprintf (f, "%d", (sizeof (int)));
++fclose (f);
++ ;
++ return 0;
+ }
+-EOF
+-if { (eval echo configure:5439: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+-then
+- ac_cv_sizeof_int=`cat conftestval`
++_ACEOF
++rm -f conftest$ac_exeext
++if { (eval echo "$as_me:7080: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:7083: \$? = $ac_status" >&5
++ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
++ { (eval echo "$as_me:7085: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:7088: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_sizeof_int=`cat conftest.val`
++else
++ echo "$as_me: program exited with status $ac_status" >&5
++echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++fi
++rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
++fi
++fi
++rm -f conftest.val
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -fr conftest*
+ ac_cv_sizeof_int=0
+ fi
+-rm -fr conftest*
+ fi
+-
++echo "$as_me:7104: result: $ac_cv_sizeof_int" >&5
++echo "${ECHO_T}$ac_cv_sizeof_int" >&6
++cat >>confdefs.h <<EOF
++#define SIZEOF_INT $ac_cv_sizeof_int
++EOF
++
++echo "$as_me:7110: checking for char" >&5
++echo $ECHO_N "checking for char... $ECHO_C" >&6
++if test "${ac_cv_type_char+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ cat >conftest.$ac_ext <<_ACEOF
++#line 7116 "configure"
++#include "confdefs.h"
++$ac_includes_default
++int
++main ()
++{
++if ((char *) 0)
++ return 0;
++if (sizeof (char))
++ return 0;
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:7131: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:7134: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:7137: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:7140: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_type_char=yes
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_cv_type_char=no
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++fi
++echo "$as_me:7150: result: $ac_cv_type_char" >&5
++echo "${ECHO_T}$ac_cv_type_char" >&6
++
++echo "$as_me:7153: checking size of char" >&5
++echo $ECHO_N "checking size of char... $ECHO_C" >&6
++if test "${ac_cv_sizeof_char+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test "$ac_cv_type_char" = yes; then
++ if test "$cross_compiling" = yes; then
++ # Depending upon the size, compute the lo and hi bounds.
++cat >conftest.$ac_ext <<_ACEOF
++#line 7162 "configure"
++#include "confdefs.h"
++$ac_includes_default
++int
++main ()
++{
++int _array_ [1 - 2 * !((sizeof (char)) >= 0)]
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:7174: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:7177: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:7180: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:7183: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_lo=0 ac_mid=0
++ while :; do
++ cat >conftest.$ac_ext <<_ACEOF
++#line 7188 "configure"
++#include "confdefs.h"
++$ac_includes_default
++int
++main ()
++{
++int _array_ [1 - 2 * !((sizeof (char)) <= $ac_mid)]
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:7200: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:7203: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:7206: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:7209: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_hi=$ac_mid; break
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_lo=`expr $ac_mid + 1`; ac_mid=`expr 2 '*' $ac_mid + 1`
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++ done
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_hi=-1 ac_mid=-1
++ while :; do
++ cat >conftest.$ac_ext <<_ACEOF
++#line 7225 "configure"
++#include "confdefs.h"
++$ac_includes_default
++int
++main ()
++{
++int _array_ [1 - 2 * !((sizeof (char)) >= $ac_mid)]
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:7237: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:7240: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:7243: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:7246: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_lo=$ac_mid; break
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_hi=`expr $ac_mid - 1`; ac_mid=`expr 2 '*' $ac_mid`
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++ done
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++# Binary search between lo and hi bounds.
++while test "x$ac_lo" != "x$ac_hi"; do
++ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
++ cat >conftest.$ac_ext <<_ACEOF
++#line 7262 "configure"
++#include "confdefs.h"
++$ac_includes_default
++int
++main ()
++{
++int _array_ [1 - 2 * !((sizeof (char)) <= $ac_mid)]
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:7274: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:7277: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:7280: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:7283: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_hi=$ac_mid
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_lo=`expr $ac_mid + 1`
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++done
++ac_cv_sizeof_char=$ac_lo
++else
++ if test "$cross_compiling" = yes; then
++ { { echo "$as_me:7296: error: cannot run test program while cross compiling" >&5
++echo "$as_me: error: cannot run test program while cross compiling" >&2;}
++ { (exit 1); exit 1; }; }
++else
++ cat >conftest.$ac_ext <<_ACEOF
++#line 7301 "configure"
++#include "confdefs.h"
++$ac_includes_default
++int
++main ()
++{
++FILE *f = fopen ("conftest.val", "w");
++if (!f)
++ exit (1);
++fprintf (f, "%d", (sizeof (char)));
++fclose (f);
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest$ac_exeext
++if { (eval echo "$as_me:7317: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:7320: \$? = $ac_status" >&5
++ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
++ { (eval echo "$as_me:7322: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:7325: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_sizeof_char=`cat conftest.val`
++else
++ echo "$as_me: program exited with status $ac_status" >&5
++echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++fi
++rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
++fi
++fi
++rm -f conftest.val
++else
++ ac_cv_sizeof_char=0
++fi
+ fi
+-echo "$ac_t""$ac_cv_sizeof_int" 1>&6
+-cat >> confdefs.h <<EOF
+-#define SIZEOF_INT $ac_cv_sizeof_int
++echo "$as_me:7341: result: $ac_cv_sizeof_char" >&5
++echo "${ECHO_T}$ac_cv_sizeof_char" >&6
++cat >>confdefs.h <<EOF
++#define SIZEOF_CHAR $ac_cv_sizeof_char
+ EOF
+
+-
+-echo $ac_n "checking size of char""... $ac_c" 1>&6
+-echo "configure:5459: checking size of char" >&5
+-if eval "test \"`echo '$''{'ac_cv_sizeof_char'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:7347: checking for char*" >&5
++echo $ECHO_N "checking for char*... $ECHO_C" >&6
++if test "${ac_cv_type_charp+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- if test "$cross_compiling" = yes; then
+- ac_cv_sizeof_char=1
++ cat >conftest.$ac_ext <<_ACEOF
++#line 7353 "configure"
++#include "confdefs.h"
++$ac_includes_default
++int
++main ()
++{
++if ((char* *) 0)
++ return 0;
++if (sizeof (char*))
++ return 0;
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:7368: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:7371: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:7374: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:7377: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_type_charp=yes
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_cv_type_charp=no
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++fi
++echo "$as_me:7387: result: $ac_cv_type_charp" >&5
++echo "${ECHO_T}$ac_cv_type_charp" >&6
++
++echo "$as_me:7390: checking size of char*" >&5
++echo $ECHO_N "checking size of char*... $ECHO_C" >&6
++if test "${ac_cv_sizeof_charp+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 5467 "configure"
++ if test "$ac_cv_type_charp" = yes; then
++ if test "$cross_compiling" = yes; then
++ # Depending upon the size, compute the lo and hi bounds.
++cat >conftest.$ac_ext <<_ACEOF
++#line 7399 "configure"
+ #include "confdefs.h"
+-#include <stdio.h>
+-main()
++$ac_includes_default
++int
++main ()
+ {
+- FILE *f=fopen("conftestval", "w");
+- if (!f) exit(1);
+- fprintf(f, "%d\n", sizeof(char));
+- exit(0);
++int _array_ [1 - 2 * !((sizeof (char*)) >= 0)]
++ ;
++ return 0;
+ }
+-EOF
+-if { (eval echo configure:5478: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+-then
+- ac_cv_sizeof_char=`cat conftestval`
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:7411: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:7414: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:7417: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:7420: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_lo=0 ac_mid=0
++ while :; do
++ cat >conftest.$ac_ext <<_ACEOF
++#line 7425 "configure"
++#include "confdefs.h"
++$ac_includes_default
++int
++main ()
++{
++int _array_ [1 - 2 * !((sizeof (char*)) <= $ac_mid)]
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:7437: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:7440: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:7443: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:7446: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_hi=$ac_mid; break
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_lo=`expr $ac_mid + 1`; ac_mid=`expr 2 '*' $ac_mid + 1`
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++ done
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -fr conftest*
+- ac_cv_sizeof_char=0
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_hi=-1 ac_mid=-1
++ while :; do
++ cat >conftest.$ac_ext <<_ACEOF
++#line 7462 "configure"
++#include "confdefs.h"
++$ac_includes_default
++int
++main ()
++{
++int _array_ [1 - 2 * !((sizeof (char*)) >= $ac_mid)]
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:7474: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:7477: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:7480: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:7483: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_lo=$ac_mid; break
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_hi=`expr $ac_mid - 1`; ac_mid=`expr 2 '*' $ac_mid`
+ fi
+-rm -fr conftest*
++rm -f conftest.$ac_objext conftest.$ac_ext
++ done
+ fi
+-
++rm -f conftest.$ac_objext conftest.$ac_ext
++# Binary search between lo and hi bounds.
++while test "x$ac_lo" != "x$ac_hi"; do
++ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
++ cat >conftest.$ac_ext <<_ACEOF
++#line 7499 "configure"
++#include "confdefs.h"
++$ac_includes_default
++int
++main ()
++{
++int _array_ [1 - 2 * !((sizeof (char*)) <= $ac_mid)]
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:7511: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:7514: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:7517: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:7520: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_hi=$ac_mid
++else
++ echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++ac_lo=`expr $ac_mid + 1`
+ fi
+-echo "$ac_t""$ac_cv_sizeof_char" 1>&6
+-cat >> confdefs.h <<EOF
+-#define SIZEOF_CHAR $ac_cv_sizeof_char
+-EOF
+-
+-
+-echo $ac_n "checking size of char*""... $ac_c" 1>&6
+-echo "configure:5498: checking size of char*" >&5
+-if eval "test \"`echo '$''{'ac_cv_sizeof_charp'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++rm -f conftest.$ac_objext conftest.$ac_ext
++done
++ac_cv_sizeof_charp=$ac_lo
+ else
+ if test "$cross_compiling" = yes; then
+- ac_cv_sizeof_charp=2
++ { { echo "$as_me:7533: error: cannot run test program while cross compiling" >&5
++echo "$as_me: error: cannot run test program while cross compiling" >&2;}
++ { (exit 1); exit 1; }; }
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 5506 "configure"
++ cat >conftest.$ac_ext <<_ACEOF
++#line 7538 "configure"
+ #include "confdefs.h"
+-#include <stdio.h>
+-main()
++$ac_includes_default
++int
++main ()
+ {
+- FILE *f=fopen("conftestval", "w");
+- if (!f) exit(1);
+- fprintf(f, "%d\n", sizeof(char*));
+- exit(0);
++FILE *f = fopen ("conftest.val", "w");
++if (!f)
++ exit (1);
++fprintf (f, "%d", (sizeof (char*)));
++fclose (f);
++ ;
++ return 0;
+ }
+-EOF
+-if { (eval echo configure:5517: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+-then
+- ac_cv_sizeof_charp=`cat conftestval`
++_ACEOF
++rm -f conftest$ac_exeext
++if { (eval echo "$as_me:7554: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:7557: \$? = $ac_status" >&5
++ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
++ { (eval echo "$as_me:7559: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:7562: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_sizeof_charp=`cat conftest.val`
++else
++ echo "$as_me: program exited with status $ac_status" >&5
++echo "$as_me: failed program was:" >&5
++cat conftest.$ac_ext >&5
++fi
++rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
++fi
++fi
++rm -f conftest.val
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -fr conftest*
+ ac_cv_sizeof_charp=0
+ fi
+-rm -fr conftest*
+-fi
+-
+ fi
+-echo "$ac_t""$ac_cv_sizeof_charp" 1>&6
+-cat >> confdefs.h <<EOF
++echo "$as_me:7578: result: $ac_cv_sizeof_charp" >&5
++echo "${ECHO_T}$ac_cv_sizeof_charp" >&6
++cat >>confdefs.h <<EOF
+ #define SIZEOF_CHARP $ac_cv_sizeof_charp
+ EOF
+
+-
+-
+-
+-
+ if test "x$GCC" = "xyes"; then
+ case " $CFLAGS " in
+ *[\ \ ]-Wall[\ \ ]*) ;;
+@@ -5548,11 +7594,10 @@
+ xsrcdir="$srcdir"
+ fi
+
+-
+ for n in 2 3 4 5 6 7 8 9; do
+ if test -f "${srcdir}/fribidi_tab_char_type_$n.i" ||
+ test -f "./fribidi_tab_char_type_$n.i"; then
+- cat >> confdefs.h <<EOF
++ cat >>confdefs.h <<EOF
+ #define HAS_FRIBIDI_TAB_CHAR_TYPE_${n}_I 1
+ EOF
+
+@@ -5562,22 +7607,21 @@
+ echo "creating fribidi_tab_char_type_stamp"
+ echo "time-stamp" > fribidi_tab_char_type_stamp
+
+-
+-
+ # Check whether --enable-debug or --disable-debug was given.
+ if test "${enable_debug+set}" = set; then
+ enableval="$enable_debug"
+ case "${enableval}" in
+- yes) debug=true ;;
++ yes) debug=true ;;
+ no) debug=false ;;
+- *) { echo "configure: error: bad value ${enableval} for --enable-debug" 1>&2; exit 1; } ;;
++ *) { { echo "$as_me:7616: error: bad value ${enableval} for --enable-debug" >&5
++echo "$as_me: error: bad value ${enableval} for --enable-debug" >&2;}
++ { (exit 1); exit 1; }; } ;;
+ esac
+ else
+ debug=false
+-fi
+-
++fi;
+ if test x"$debug" = xtrue; then
+- cat >> confdefs.h <<\EOF
++ cat >>confdefs.h <<\EOF
+ #define DEBUG 1
+ EOF
+
+@@ -5589,14 +7633,15 @@
+ case "${enableval}" in
+ yes) malloc=true ;;
+ no) malloc=false ;;
+- *) { echo "configure: error: bad value ${enableval} for --enable-malloc" 1>&2; exit 1; } ;;
++ *) { { echo "$as_me:7636: error: bad value ${enableval} for --enable-malloc" >&5
++echo "$as_me: error: bad value ${enableval} for --enable-malloc" >&2;}
++ { (exit 1); exit 1; }; } ;;
+ esac
+ else
+ malloc=false
+-fi
+-
++fi;
+ if test x"$malloc" = xtrue; then
+- cat >> confdefs.h <<\EOF
++ cat >>confdefs.h <<\EOF
+ #define USE_SIMPLE_MALLOC 1
+ EOF
+
+@@ -5608,14 +7653,15 @@
+ case "${enableval}" in
+ yes) memopt=true ;;
+ no) memopt=false ;;
+- *) { echo "configure: error: bad value ${enableval} for --enable-memopt" 1>&2; exit 1; } ;;
++ *) { { echo "$as_me:7656: error: bad value ${enableval} for --enable-memopt" >&5
++echo "$as_me: error: bad value ${enableval} for --enable-memopt" >&2;}
++ { (exit 1); exit 1; }; } ;;
+ esac
+ else
+ memopt=false
+-fi
+-
++fi;
+ if test x"$memopt" = xtrue; then
+- cat >> confdefs.h <<\EOF
++ cat >>confdefs.h <<\EOF
+ #define MEM_OPTIMIZED 1
+ EOF
+
+@@ -5627,14 +7673,15 @@
+ case "${withval}" in
+ yes) charsets=true ;;
+ no) charsets=false ;;
+- *) { echo "configure: error: bad value ${withval} for --without-charsets" 1>&2; exit 1; } ;;
++ *) { { echo "$as_me:7676: error: bad value ${withval} for --without-charsets" >&5
++echo "$as_me: error: bad value ${withval} for --without-charsets" >&2;}
++ { (exit 1); exit 1; }; } ;;
+ esac
+ else
+ charsets=true
+-fi
+-
++fi;
+ if test x"$charsets" = xfalse; then
+- cat >> confdefs.h <<\EOF
++ cat >>confdefs.h <<\EOF
+ #define FRIBIDI_NO_CHARSETS 1
+ EOF
+
+@@ -5643,412 +7690,986 @@
+ FRIBIDI_NO_CHARSETS=0
+ fi
+
+-
+-trap '' 1 2 15
+-cat > confcache <<\EOF
++ac_config_files="$ac_config_files Makefile fribidi_config.h fribidi-config fribidi.pc fribidi.spec"
++ac_config_commands="$ac_config_commands default"
++cat >confcache <<\_ACEOF
+ # This file is a shell script that caches the results of configure
+ # tests run on this system so they can be shared between configure
+-# scripts and configure runs. It is not useful on other systems.
+-# If it contains results you don't want to keep, you may remove or edit it.
+-#
+-# By default, configure uses ./config.cache as the cache file,
+-# creating it if it does not exist already. You can give configure
+-# the --cache-file=FILE option to use a different cache file; that is
+-# what configure does when it calls configure scripts in
+-# subdirectories, so they share the cache.
+-# Giving --cache-file=/dev/null disables caching, for debugging configure.
+-# config.status only pays attention to the cache file if you give it the
+-# --recheck option to rerun configure.
+-#
+-EOF
++# scripts and configure runs, see configure's option --config-cache.
++# It is not useful on other systems. If it contains results you don't
++# want to keep, you may remove or edit it.
++#
++# config.status only pays attention to the cache file if you give it
++# the --recheck option to rerun configure.
++#
++# `ac_cv_env_foo' variables (set or unset) will be overriden when
++# loading this file, other *unset* `ac_cv_foo' will be assigned the
++# following values.
++
++_ACEOF
++
+ # The following way of writing the cache mishandles newlines in values,
+ # but we know of no workaround that is simple, portable, and efficient.
+ # So, don't put newlines in cache variables' values.
+ # Ultrix sh set writes to stderr and can't be redirected directly,
+ # and sets the high bit in the cache file unless we assign to the vars.
+-(set) 2>&1 |
+- case `(ac_space=' '; set | grep ac_space) 2>&1` in
+- *ac_space=\ *)
+- # `set' does not quote correctly, so add quotes (double-quote substitution
+- # turns \\\\ into \\, and sed turns \\ into \).
+- sed -n \
+- -e "s/'/'\\\\''/g" \
+- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+- ;;
+- *)
+- # `set' quotes correctly as required by POSIX, so do not add quotes.
+- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+- ;;
+- esac >> confcache
+-if cmp -s $cache_file confcache; then
+- :
+-else
++{
++ (set) 2>&1 |
++ case `(ac_space=' '; set | grep ac_space) 2>&1` in
++ *ac_space=\ *)
++ # `set' does not quote correctly, so add quotes (double-quote
++ # substitution turns \\\\ into \\, and sed turns \\ into \).
++ sed -n \
++ "s/'/'\\\\''/g;
++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
++ ;;
++ *)
++ # `set' quotes correctly as required by POSIX, so do not add quotes.
++ sed -n \
++ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
++ ;;
++ esac;
++} |
++ sed '
++ t clear
++ : clear
++ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
++ t end
++ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
++ : end' >>confcache
++if cmp -s $cache_file confcache; then :; else
+ if test -w $cache_file; then
+- echo "updating cache $cache_file"
+- cat confcache > $cache_file
++ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
++ cat confcache >$cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+ fi
+ rm -f confcache
+
+-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+-
+ test "x$prefix" = xNONE && prefix=$ac_default_prefix
+ # Let make expand exec_prefix.
+ test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+-# Any assignment to VPATH causes Sun make to only execute
+-# the first set of double-colon rules, so remove it if not needed.
+-# If there is a colon in the path, we need to keep it.
++# VPATH may cause trouble with some makes, so we remove $(srcdir),
++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
++# trailing colons and then remove the whole line if VPATH becomes empty
++# (actually we leave an empty line to preserve line numbers).
+ if test "x$srcdir" = x.; then
+- ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
++ ac_vpsub='/^[ ]*VPATH[ ]*=/{
++s/:*\$(srcdir):*/:/;
++s/:*\${srcdir}:*/:/;
++s/:*@srcdir@:*/:/;
++s/^\([^=]*=[ ]*\):*/\1/;
++s/:*$//;
++s/^[^=]*=[ ]*$//;
++}'
+ fi
+
+-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+-
+ DEFS=-DHAVE_CONFIG_H
+
+-# Without the "./", some shells look in PATH for config.status.
+-: ${CONFIG_STATUS=./config.status}
++if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
++ { { echo "$as_me:7772: error: conditional \"AMDEP\" was never defined.
++Usually this means the macro was only invoked conditionally." >&5
++echo "$as_me: error: conditional \"AMDEP\" was never defined.
++Usually this means the macro was only invoked conditionally." >&2;}
++ { (exit 1); exit 1; }; }
++fi
+
+-echo creating $CONFIG_STATUS
+-rm -f $CONFIG_STATUS
+-cat > $CONFIG_STATUS <<EOF
+-#! /bin/sh
++: ${CONFIG_STATUS=./config.status}
++ac_clean_files_save=$ac_clean_files
++ac_clean_files="$ac_clean_files $CONFIG_STATUS"
++{ echo "$as_me:7782: creating $CONFIG_STATUS" >&5
++echo "$as_me: creating $CONFIG_STATUS" >&6;}
++cat >$CONFIG_STATUS <<_ACEOF
++#! $SHELL
+ # Generated automatically by configure.
+ # Run this file to recreate the current configuration.
+-# This directory was configured as follows,
+-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+-#
+-# $0 $ac_configure_args
+-#
+ # Compiler output produced by configure, useful for debugging
+-# configure, is in ./config.log if it exists.
++# configure, is in config.log if it exists.
+
+-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+-for ac_option
++debug=false
++SHELL=\${CONFIG_SHELL-$SHELL}
++ac_cs_invocation="\$0 \$@"
++
++_ACEOF
++
++cat >>$CONFIG_STATUS <<\_ACEOF
++# Be Bourne compatible
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
++ emulate sh
++ NULLCMD=:
++elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
++ set -o posix
++fi
++
++# Name of the executable.
++as_me=`echo "$0" |sed 's,.*[\\/],,'`
++
++if expr a : '\(a\)' >/dev/null 2>&1; then
++ as_expr=expr
++else
++ as_expr=false
++fi
++
++rm -f conf$$ conf$$.exe conf$$.file
++echo >conf$$.file
++if ln -s conf$$.file conf$$ 2>/dev/null; then
++ # We could just check for DJGPP; but this test a) works b) is more generic
++ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
++ if test -f conf$$.exe; then
++ # Don't use ln at all; we don't have any links
++ as_ln_s='cp -p'
++ else
++ as_ln_s='ln -s'
++ fi
++elif ln conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s=ln
++else
++ as_ln_s='cp -p'
++fi
++rm -f conf$$ conf$$.exe conf$$.file
++
++as_executable_p="test -f"
++
++# Support unset when possible.
++if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
++ as_unset=unset
++else
++ as_unset=false
++fi
++
++# NLS nuisances.
++$as_unset LANG || test "${LANG+set}" != set || { LANG=C; export LANG; }
++$as_unset LC_ALL || test "${LC_ALL+set}" != set || { LC_ALL=C; export LC_ALL; }
++$as_unset LC_TIME || test "${LC_TIME+set}" != set || { LC_TIME=C; export LC_TIME; }
++$as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set || { LC_CTYPE=C; export LC_CTYPE; }
++$as_unset LANGUAGE || test "${LANGUAGE+set}" != set || { LANGUAGE=C; export LANGUAGE; }
++$as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set || { LC_COLLATE=C; export LC_COLLATE; }
++$as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set || { LC_NUMERIC=C; export LC_NUMERIC; }
++$as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set || { LC_MESSAGES=C; export LC_MESSAGES; }
++
++# IFS
++# We need space, tab and new line, in precisely that order.
++as_nl='
++'
++IFS=" $as_nl"
++
++# CDPATH.
++$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=:; export CDPATH; }
++
++exec 6>&1
++
++_ACEOF
++
++# Files that config.status was made for.
++if test -n "$ac_config_files"; then
++ echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
++fi
++
++if test -n "$ac_config_headers"; then
++ echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
++fi
++
++if test -n "$ac_config_links"; then
++ echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
++fi
++
++if test -n "$ac_config_commands"; then
++ echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
++fi
++
++cat >>$CONFIG_STATUS <<\EOF
++
++ac_cs_usage="\
++\`$as_me' instantiates files from templates according to the
++current configuration.
++
++Usage: $0 [OPTIONS] [FILE]...
++
++ -h, --help print this help, then exit
++ -V, --version print version number, then exit
++ -d, --debug don't remove temporary files
++ --recheck update $as_me by reconfiguring in the same conditions
++ --file=FILE[:TEMPLATE]
++ instantiate the configuration file FILE
++ --header=FILE[:TEMPLATE]
++ instantiate the configuration header FILE
++
++Configuration files:
++$config_files
++
++Configuration headers:
++$config_headers
++
++Configuration commands:
++$config_commands
++
++Report bugs to <bug-autoconf@gnu.org>."
++EOF
++
++cat >>$CONFIG_STATUS <<EOF
++ac_cs_version="\\
++config.status
++configured by $0, generated by GNU Autoconf 2.52,
++ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
++
++Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
++Free Software Foundation, Inc.
++This config.status script is free software; the Free Software Foundation
++gives unlimited permission to copy, distribute and modify it."
++srcdir=$srcdir
++INSTALL="$INSTALL"
++EOF
++
++cat >>$CONFIG_STATUS <<\EOF
++# If no file are specified by the user, then we need to provide default
++# value. By we need to know if files were specified by the user.
++ac_need_defaults=:
++while test $# != 0
+ do
+- case "\$ac_option" in
++ case $1 in
++ --*=*)
++ ac_option=`expr "x$1" : 'x\([^=]*\)='`
++ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
++ shift
++ set dummy "$ac_option" "$ac_optarg" ${1+"$@"}
++ shift
++ ;;
++ -*);;
++ *) # This is not an option, so the user has probably given explicit
++ # arguments.
++ ac_need_defaults=false;;
++ esac
++
++ case $1 in
++ # Handling of the options.
++EOF
++cat >>$CONFIG_STATUS <<EOF
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+- echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+- exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+- -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+- echo "$CONFIG_STATUS generated by autoconf version 2.13"
+- exit 0 ;;
+- -help | --help | --hel | --he | --h)
+- echo "\$ac_cs_usage"; exit 0 ;;
+- *) echo "\$ac_cs_usage"; exit 1 ;;
++ echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion"
++ exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;;
++EOF
++cat >>$CONFIG_STATUS <<\EOF
++ --version | --vers* | -V )
++ echo "$ac_cs_version"; exit 0 ;;
++ --he | --h)
++ # Conflict between --help and --header
++ { { echo "$as_me:7958: error: ambiguous option: $1
++Try \`$0 --help' for more information." >&5
++echo "$as_me: error: ambiguous option: $1
++Try \`$0 --help' for more information." >&2;}
++ { (exit 1); exit 1; }; };;
++ --help | --hel | -h )
++ echo "$ac_cs_usage"; exit 0 ;;
++ --debug | --d* | -d )
++ debug=: ;;
++ --file | --fil | --fi | --f )
++ shift
++ CONFIG_FILES="$CONFIG_FILES $1"
++ ac_need_defaults=false;;
++ --header | --heade | --head | --hea )
++ shift
++ CONFIG_HEADERS="$CONFIG_HEADERS $1"
++ ac_need_defaults=false;;
++
++ # This is an error.
++ -*) { { echo "$as_me:7977: error: unrecognized option: $1
++Try \`$0 --help' for more information." >&5
++echo "$as_me: error: unrecognized option: $1
++Try \`$0 --help' for more information." >&2;}
++ { (exit 1); exit 1; }; } ;;
++
++ *) ac_config_targets="$ac_config_targets $1" ;;
++
+ esac
++ shift
+ done
+
+-ac_given_srcdir=$srcdir
+-ac_given_INSTALL="$INSTALL"
+-
+-trap 'rm -fr `echo "
+-Makefile
+-fribidi_config.h
+-fribidi-config
+-fribidi.pc
+-fribidi.spec
+- config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+-EOF
+-cat >> $CONFIG_STATUS <<EOF
+-
+-# Protect against being on the right side of a sed subst in config.status.
+-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+-$ac_vpsub
+-$extrasub
+-s%@SHELL@%$SHELL%g
+-s%@CFLAGS@%$CFLAGS%g
+-s%@CPPFLAGS@%$CPPFLAGS%g
+-s%@CXXFLAGS@%$CXXFLAGS%g
+-s%@FFLAGS@%$FFLAGS%g
+-s%@DEFS@%$DEFS%g
+-s%@LDFLAGS@%$LDFLAGS%g
+-s%@LIBS@%$LIBS%g
+-s%@exec_prefix@%$exec_prefix%g
+-s%@prefix@%$prefix%g
+-s%@program_transform_name@%$program_transform_name%g
+-s%@bindir@%$bindir%g
+-s%@sbindir@%$sbindir%g
+-s%@libexecdir@%$libexecdir%g
+-s%@datadir@%$datadir%g
+-s%@sysconfdir@%$sysconfdir%g
+-s%@sharedstatedir@%$sharedstatedir%g
+-s%@localstatedir@%$localstatedir%g
+-s%@libdir@%$libdir%g
+-s%@includedir@%$includedir%g
+-s%@oldincludedir@%$oldincludedir%g
+-s%@infodir@%$infodir%g
+-s%@mandir@%$mandir%g
+-s%@FRIBIDI_MAJOR_VERSION@%$FRIBIDI_MAJOR_VERSION%g
+-s%@FRIBIDI_MINOR_VERSION@%$FRIBIDI_MINOR_VERSION%g
+-s%@FRIBIDI_MICRO_VERSION@%$FRIBIDI_MICRO_VERSION%g
+-s%@FRIBIDI_VERSION@%$FRIBIDI_VERSION%g
+-s%@FRIBIDI_INTERFACE_VERSION@%$FRIBIDI_INTERFACE_VERSION%g
+-s%@FRIBIDI_INTERFACE_AGE@%$FRIBIDI_INTERFACE_AGE%g
+-s%@FRIBIDI_BINARY_AGE@%$FRIBIDI_BINARY_AGE%g
+-s%@FRIBIDI_RPM_RELEASE@%$FRIBIDI_RPM_RELEASE%g
+-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+-s%@INSTALL_DATA@%$INSTALL_DATA%g
+-s%@PACKAGE@%$PACKAGE%g
+-s%@VERSION@%$VERSION%g
+-s%@ACLOCAL@%$ACLOCAL%g
+-s%@AUTOCONF@%$AUTOCONF%g
+-s%@AUTOMAKE@%$AUTOMAKE%g
+-s%@AUTOHEADER@%$AUTOHEADER%g
+-s%@MAKEINFO@%$MAKEINFO%g
+-s%@SET_MAKE@%$SET_MAKE%g
+-s%@AWK@%$AWK%g
+-s%@CC@%$CC%g
+-s%@CPP@%$CPP%g
+-s%@LN_S@%$LN_S%g
+-s%@RANLIB@%$RANLIB%g
+-s%@SED@%$SED%g
+-s%@host@%$host%g
+-s%@host_alias@%$host_alias%g
+-s%@host_cpu@%$host_cpu%g
+-s%@host_vendor@%$host_vendor%g
+-s%@host_os@%$host_os%g
+-s%@build@%$build%g
+-s%@build_alias@%$build_alias%g
+-s%@build_cpu@%$build_cpu%g
+-s%@build_vendor@%$build_vendor%g
+-s%@build_os@%$build_os%g
+-s%@OBJEXT@%$OBJEXT%g
+-s%@EXEEXT@%$EXEEXT%g
+-s%@ECHO@%$ECHO%g
+-s%@STRIP@%$STRIP%g
+-s%@LIBTOOL@%$LIBTOOL%g
+-s%@FRIBIDI_NO_CHARSETS@%$FRIBIDI_NO_CHARSETS%g
++exec 5>>config.log
++cat >&5 << _ACEOF
+
+-CEOF
++## ----------------------- ##
++## Running config.status. ##
++## ----------------------- ##
++
++This file was extended by $as_me 2.52, executed with
++ CONFIG_FILES = $CONFIG_FILES
++ CONFIG_HEADERS = $CONFIG_HEADERS
++ CONFIG_LINKS = $CONFIG_LINKS
++ CONFIG_COMMANDS = $CONFIG_COMMANDS
++ > $ac_cs_invocation
++on `(hostname || uname -n) 2>/dev/null | sed 1q`
++
++_ACEOF
+ EOF
+
+-cat >> $CONFIG_STATUS <<\EOF
++cat >>$CONFIG_STATUS <<EOF
++#
++# INIT-COMMANDS section.
++#
+
+-# Split the substitutions into bite-sized pieces for seds with
+-# small command number limits, like on Digital OSF/1 and HP-UX.
+-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+-ac_file=1 # Number of current file.
+-ac_beg=1 # First line for current file.
+-ac_end=$ac_max_sed_cmds # Line after last line for current file.
+-ac_more_lines=:
+-ac_sed_cmds=""
+-while $ac_more_lines; do
+- if test $ac_beg -gt 1; then
+- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+- else
+- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+- fi
+- if test ! -s conftest.s$ac_file; then
+- ac_more_lines=false
+- rm -f conftest.s$ac_file
+- else
+- if test -z "$ac_sed_cmds"; then
+- ac_sed_cmds="sed -f conftest.s$ac_file"
+- else
+- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+- fi
+- ac_file=`expr $ac_file + 1`
+- ac_beg=$ac_end
+- ac_end=`expr $ac_end + $ac_max_sed_cmds`
+- fi
++AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
++
++EOF
++
++cat >>$CONFIG_STATUS <<\EOF
++for ac_config_target in $ac_config_targets
++do
++ case "$ac_config_target" in
++ # Handling of arguments.
++ "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
++ "fribidi_config.h" ) CONFIG_FILES="$CONFIG_FILES fribidi_config.h" ;;
++ "fribidi-config" ) CONFIG_FILES="$CONFIG_FILES fribidi-config" ;;
++ "fribidi.pc" ) CONFIG_FILES="$CONFIG_FILES fribidi.pc" ;;
++ "fribidi.spec" ) CONFIG_FILES="$CONFIG_FILES fribidi.spec" ;;
++ "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
++ "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
++ "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
++ *) { { echo "$as_me:8029: error: invalid argument: $ac_config_target" >&5
++echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
++ { (exit 1); exit 1; }; };;
++ esac
+ done
+-if test -z "$ac_sed_cmds"; then
+- ac_sed_cmds=cat
++
++# If the user did not use the arguments to specify the items to instantiate,
++# then the envvar interface is used. Set only those that are not.
++# We use the long form for the default assignment because of an extremely
++# bizarre bug on SunOS 4.1.3.
++if $ac_need_defaults; then
++ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
++ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
++ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+ fi
++
++# Create a temporary directory, and hook for its removal unless debugging.
++$debug ||
++{
++ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
++ trap '{ (exit 1); exit 1; }' 1 2 13 15
++}
++
++# Create a (secure) tmp directory for tmp files.
++: ${TMPDIR=/tmp}
++{
++ tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` &&
++ test -n "$tmp" && test -d "$tmp"
++} ||
++{
++ tmp=$TMPDIR/cs$$-$RANDOM
++ (umask 077 && mkdir $tmp)
++} ||
++{
++ echo "$me: cannot create a temporary directory in $TMPDIR" >&2
++ { (exit 1); exit 1; }
++}
++
++EOF
++
++cat >>$CONFIG_STATUS <<EOF
++
++#
++# CONFIG_FILES section.
++#
++
++# No need to generate the scripts if there are no CONFIG_FILES.
++# This happens for instance when ./config.status config.h
++if test -n "\$CONFIG_FILES"; then
++ # Protect against being on the right side of a sed subst in config.status.
++ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
++ s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
++s,@SHELL@,$SHELL,;t t
++s,@exec_prefix@,$exec_prefix,;t t
++s,@prefix@,$prefix,;t t
++s,@program_transform_name@,$program_transform_name,;t t
++s,@bindir@,$bindir,;t t
++s,@sbindir@,$sbindir,;t t
++s,@libexecdir@,$libexecdir,;t t
++s,@datadir@,$datadir,;t t
++s,@sysconfdir@,$sysconfdir,;t t
++s,@sharedstatedir@,$sharedstatedir,;t t
++s,@localstatedir@,$localstatedir,;t t
++s,@libdir@,$libdir,;t t
++s,@includedir@,$includedir,;t t
++s,@oldincludedir@,$oldincludedir,;t t
++s,@infodir@,$infodir,;t t
++s,@mandir@,$mandir,;t t
++s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
++s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
++s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
++s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
++s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
++s,@build_alias@,$build_alias,;t t
++s,@host_alias@,$host_alias,;t t
++s,@target_alias@,$target_alias,;t t
++s,@ECHO_C@,$ECHO_C,;t t
++s,@ECHO_N@,$ECHO_N,;t t
++s,@ECHO_T@,$ECHO_T,;t t
++s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
++s,@DEFS@,$DEFS,;t t
++s,@LIBS@,$LIBS,;t t
++s,@FRIBIDI_MAJOR_VERSION@,$FRIBIDI_MAJOR_VERSION,;t t
++s,@FRIBIDI_MINOR_VERSION@,$FRIBIDI_MINOR_VERSION,;t t
++s,@FRIBIDI_MICRO_VERSION@,$FRIBIDI_MICRO_VERSION,;t t
++s,@FRIBIDI_VERSION@,$FRIBIDI_VERSION,;t t
++s,@FRIBIDI_INTERFACE_VERSION@,$FRIBIDI_INTERFACE_VERSION,;t t
++s,@FRIBIDI_INTERFACE_AGE@,$FRIBIDI_INTERFACE_AGE,;t t
++s,@FRIBIDI_BINARY_AGE@,$FRIBIDI_BINARY_AGE,;t t
++s,@FRIBIDI_RPM_RELEASE@,$FRIBIDI_RPM_RELEASE,;t t
++s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
++s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
++s,@INSTALL_DATA@,$INSTALL_DATA,;t t
++s,@PACKAGE@,$PACKAGE,;t t
++s,@VERSION@,$VERSION,;t t
++s,@ACLOCAL@,$ACLOCAL,;t t
++s,@AUTOCONF@,$AUTOCONF,;t t
++s,@AUTOMAKE@,$AUTOMAKE,;t t
++s,@AUTOHEADER@,$AUTOHEADER,;t t
++s,@MAKEINFO@,$MAKEINFO,;t t
++s,@AMTAR@,$AMTAR,;t t
++s,@install_sh@,$install_sh,;t t
++s,@STRIP@,$STRIP,;t t
++s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
++s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
++s,@AWK@,$AWK,;t t
++s,@SET_MAKE@,$SET_MAKE,;t t
++s,@CC@,$CC,;t t
++s,@CFLAGS@,$CFLAGS,;t t
++s,@LDFLAGS@,$LDFLAGS,;t t
++s,@CPPFLAGS@,$CPPFLAGS,;t t
++s,@ac_ct_CC@,$ac_ct_CC,;t t
++s,@EXEEXT@,$EXEEXT,;t t
++s,@OBJEXT@,$OBJEXT,;t t
++s,@DEPDIR@,$DEPDIR,;t t
++s,@am__include@,$am__include,;t t
++s,@am__quote@,$am__quote,;t t
++s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
++s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
++s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
++s,@CCDEPMODE@,$CCDEPMODE,;t t
++s,@CPP@,$CPP,;t t
++s,@LN_S@,$LN_S,;t t
++s,@RANLIB@,$RANLIB,;t t
++s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
++s,@SED@,$SED,;t t
++s,@build@,$build,;t t
++s,@build_cpu@,$build_cpu,;t t
++s,@build_vendor@,$build_vendor,;t t
++s,@build_os@,$build_os,;t t
++s,@host@,$host,;t t
++s,@host_cpu@,$host_cpu,;t t
++s,@host_vendor@,$host_vendor,;t t
++s,@host_os@,$host_os,;t t
++s,@ECHO@,$ECHO,;t t
++s,@LIBTOOL@,$LIBTOOL,;t t
++s,@FRIBIDI_NO_CHARSETS@,$FRIBIDI_NO_CHARSETS,;t t
++CEOF
++
+ EOF
+
+-cat >> $CONFIG_STATUS <<EOF
++ cat >>$CONFIG_STATUS <<\EOF
++ # Split the substitutions into bite-sized pieces for seds with
++ # small command number limits, like on Digital OSF/1 and HP-UX.
++ ac_max_sed_lines=48
++ ac_sed_frag=1 # Number of current file.
++ ac_beg=1 # First line for current file.
++ ac_end=$ac_max_sed_lines # Line after last line for current file.
++ ac_more_lines=:
++ ac_sed_cmds=
++ while $ac_more_lines; do
++ if test $ac_beg -gt 1; then
++ sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
++ else
++ sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
++ fi
++ if test ! -s $tmp/subs.frag; then
++ ac_more_lines=false
++ else
++ # The purpose of the label and of the branching condition is to
++ # speed up the sed processing (if there are no `@' at all, there
++ # is no need to browse any of the substitutions).
++ # These are the two extra sed commands mentioned above.
++ (echo ':t
++ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
++ if test -z "$ac_sed_cmds"; then
++ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
++ else
++ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
++ fi
++ ac_sed_frag=`expr $ac_sed_frag + 1`
++ ac_beg=$ac_end
++ ac_end=`expr $ac_end + $ac_max_sed_lines`
++ fi
++ done
++ if test -z "$ac_sed_cmds"; then
++ ac_sed_cmds=cat
++ fi
++fi # test -n "$CONFIG_FILES"
+
+-CONFIG_FILES=\${CONFIG_FILES-"Makefile
+-fribidi_config.h
+-fribidi-config
+-fribidi.pc
+-fribidi.spec
+-"}
+ EOF
+-cat >> $CONFIG_STATUS <<\EOF
+-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
++cat >>$CONFIG_STATUS <<\EOF
++for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+- case "$ac_file" in
+- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+- *) ac_file_in="${ac_file}.in" ;;
++ case $ac_file in
++ - | *:- | *:-:* ) # input from stdin
++ cat >$tmp/stdin
++ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
++ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
++ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
++ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
++ * ) ac_file_in=$ac_file.in ;;
+ esac
+
+- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+-
+- # Remove last slash and all that follows it. Not all systems have dirname.
+- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
++ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
++ ac_dir=`$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$ac_file" : 'X\(//\)[^/]' \| \
++ X"$ac_file" : 'X\(//\)$' \| \
++ X"$ac_file" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X"$ac_file" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++ /^X\(\/\/\)$/{ s//\1/; q; }
++ /^X\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
+ if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+- # The file is in a subdirectory.
+- test ! -d "$ac_dir" && mkdir "$ac_dir"
+- ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
++ { case "$ac_dir" in
++ [\\/]* | ?:[\\/]* ) as_incr_dir=;;
++ *) as_incr_dir=.;;
++esac
++as_dummy="$ac_dir"
++for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
++ case $as_mkdir_dir in
++ # Skip DOS drivespec
++ ?:) as_incr_dir=$as_mkdir_dir ;;
++ *)
++ as_incr_dir=$as_incr_dir/$as_mkdir_dir
++ test -d "$as_incr_dir" || mkdir "$as_incr_dir"
++ ;;
++ esac
++done; }
++
++ ac_dir_suffix="/`echo $ac_dir|sed 's,^\./,,'`"
+ # A "../" for each directory in $ac_dir_suffix.
+- ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
++ ac_dots=`echo "$ac_dir_suffix" | sed 's,/[^/]*,../,g'`
+ else
+ ac_dir_suffix= ac_dots=
+ fi
+
+- case "$ac_given_srcdir" in
+- .) srcdir=.
+- if test -z "$ac_dots"; then top_srcdir=.
+- else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+- /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
++ case $srcdir in
++ .) ac_srcdir=.
++ if test -z "$ac_dots"; then
++ ac_top_srcdir=.
++ else
++ ac_top_srcdir=`echo $ac_dots | sed 's,/$,,'`
++ fi ;;
++ [\\/]* | ?:[\\/]* )
++ ac_srcdir=$srcdir$ac_dir_suffix;
++ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+- srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+- top_srcdir="$ac_dots$ac_given_srcdir" ;;
++ ac_srcdir=$ac_dots$srcdir$ac_dir_suffix
++ ac_top_srcdir=$ac_dots$srcdir ;;
+ esac
+
+- case "$ac_given_INSTALL" in
+- [/$]*) INSTALL="$ac_given_INSTALL" ;;
+- *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+- esac
+-
+- echo creating "$ac_file"
+- rm -f "$ac_file"
+- configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+- case "$ac_file" in
+- *Makefile*) ac_comsub="1i\\
+-# $configure_input" ;;
+- *) ac_comsub= ;;
+- esac
+-
+- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+- sed -e "$ac_comsub
+-s%@configure_input@%$configure_input%g
+-s%@srcdir@%$srcdir%g
+-s%@top_srcdir@%$top_srcdir%g
+-s%@INSTALL@%$INSTALL%g
+-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+-fi; done
+-rm -f conftest.s*
++ case $INSTALL in
++ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
++ *) ac_INSTALL=$ac_dots$INSTALL ;;
++ esac
++
++ if test x"$ac_file" != x-; then
++ { echo "$as_me:8280: creating $ac_file" >&5
++echo "$as_me: creating $ac_file" >&6;}
++ rm -f "$ac_file"
++ fi
++ # Let's still pretend it is `configure' which instantiates (i.e., don't
++ # use $as_me), people would be surprised to read:
++ # /* config.h. Generated automatically by config.status. */
++ configure_input="Generated automatically from `echo $ac_file_in |
++ sed 's,.*/,,'` by configure."
++
++ # First look for the input files in the build tree, otherwise in the
++ # src tree.
++ ac_file_inputs=`IFS=:
++ for f in $ac_file_in; do
++ case $f in
++ -) echo $tmp/stdin ;;
++ [\\/$]*)
++ # Absolute (can't be DOS-style, as IFS=:)
++ test -f "$f" || { { echo "$as_me:8298: error: cannot find input file: $f" >&5
++echo "$as_me: error: cannot find input file: $f" >&2;}
++ { (exit 1); exit 1; }; }
++ echo $f;;
++ *) # Relative
++ if test -f "$f"; then
++ # Build tree
++ echo $f
++ elif test -f "$srcdir/$f"; then
++ # Source tree
++ echo $srcdir/$f
++ else
++ # /dev/null tree
++ { { echo "$as_me:8311: error: cannot find input file: $f" >&5
++echo "$as_me: error: cannot find input file: $f" >&2;}
++ { (exit 1); exit 1; }; }
++ fi;;
++ esac
++ done` || { (exit 1); exit 1; }
++EOF
++cat >>$CONFIG_STATUS <<EOF
++ sed "$ac_vpsub
++$extrasub
++EOF
++cat >>$CONFIG_STATUS <<\EOF
++:t
++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
++s,@configure_input@,$configure_input,;t t
++s,@srcdir@,$ac_srcdir,;t t
++s,@top_srcdir@,$ac_top_srcdir,;t t
++s,@INSTALL@,$ac_INSTALL,;t t
++" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
++ rm -f $tmp/stdin
++ if test x"$ac_file" != x-; then
++ mv $tmp/out $ac_file
++ else
++ cat $tmp/out
++ rm -f $tmp/out
++ fi
++
++done
++EOF
++cat >>$CONFIG_STATUS <<\EOF
++
++#
++# CONFIG_HEADER section.
++#
+
+ # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+ # NAME is the cpp macro being defined and VALUE is the value it is being given.
+ #
+ # ac_d sets the value in "#define NAME VALUE" lines.
+-ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
+-ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
+-ac_dC='\3'
+-ac_dD='%g'
+-# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
+-ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
+-ac_uB='\([ ]\)%\1#\2define\3'
++ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
++ac_dB='[ ].*$,\1#\2'
++ac_dC=' '
++ac_dD=',;t'
++# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
++ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
++ac_uB='$,\1#\2define\3'
+ ac_uC=' '
+-ac_uD='\4%g'
+-# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+-ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
+-ac_eB='$%\1#\2define\3'
+-ac_eC=' '
+-ac_eD='%g'
++ac_uD=',;t'
+
+-if test "${CONFIG_HEADERS+set}" != set; then
+-EOF
+-cat >> $CONFIG_STATUS <<EOF
+- CONFIG_HEADERS="config.h"
+-EOF
+-cat >> $CONFIG_STATUS <<\EOF
+-fi
+-for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
++for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+- case "$ac_file" in
+- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+- *) ac_file_in="${ac_file}.in" ;;
+- esac
+-
+- echo creating $ac_file
+-
+- rm -f conftest.frag conftest.in conftest.out
+- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+- cat $ac_file_inputs > conftest.in
++ case $ac_file in
++ - | *:- | *:-:* ) # input from stdin
++ cat >$tmp/stdin
++ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
++ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
++ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
++ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
++ * ) ac_file_in=$ac_file.in ;;
++ esac
+
+-EOF
++ test x"$ac_file" != x- && { echo "$as_me:8372: creating $ac_file" >&5
++echo "$as_me: creating $ac_file" >&6;}
++
++ # First look for the input files in the build tree, otherwise in the
++ # src tree.
++ ac_file_inputs=`IFS=:
++ for f in $ac_file_in; do
++ case $f in
++ -) echo $tmp/stdin ;;
++ [\\/$]*)
++ # Absolute (can't be DOS-style, as IFS=:)
++ test -f "$f" || { { echo "$as_me:8383: error: cannot find input file: $f" >&5
++echo "$as_me: error: cannot find input file: $f" >&2;}
++ { (exit 1); exit 1; }; }
++ echo $f;;
++ *) # Relative
++ if test -f "$f"; then
++ # Build tree
++ echo $f
++ elif test -f "$srcdir/$f"; then
++ # Source tree
++ echo $srcdir/$f
++ else
++ # /dev/null tree
++ { { echo "$as_me:8396: error: cannot find input file: $f" >&5
++echo "$as_me: error: cannot find input file: $f" >&2;}
++ { (exit 1); exit 1; }; }
++ fi;;
++ esac
++ done` || { (exit 1); exit 1; }
++ # Remove the trailing spaces.
++ sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
+
+-# Transform confdefs.h into a sed script conftest.vals that substitutes
+-# the proper values into config.h.in to produce config.h. And first:
+-# Protect against being on the right side of a sed subst in config.status.
+-# Protect against being in an unquoted here document in config.status.
+-rm -f conftest.vals
+-cat > conftest.hdr <<\EOF
+-s/[\\&%]/\\&/g
+-s%[\\$`]%\\&%g
+-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
+-s%ac_d%ac_u%gp
+-s%ac_u%ac_e%gp
+ EOF
+-sed -n -f conftest.hdr confdefs.h > conftest.vals
+-rm -f conftest.hdr
++
++# Transform confdefs.h into two sed scripts, `conftest.defines' and
++# `conftest.undefs', that substitutes the proper values into
++# config.h.in to produce config.h. The first handles `#define'
++# templates, and the second `#undef' templates.
++# And first: Protect against being on the right side of a sed subst in
++# config.status. Protect against being in an unquoted here document
++# in config.status.
++rm -f conftest.defines conftest.undefs
++# Using a here document instead of a string reduces the quoting nightmare.
++# Putting comments in sed scripts is not portable.
++#
++# `end' is used to avoid that the second main sed command (meant for
++# 0-ary CPP macros) applies to n-ary macro definitions.
++# See the Autoconf documentation for `clear'.
++cat >confdef2sed.sed <<\EOF
++s/[\\&,]/\\&/g
++s,[\\$`],\\&,g
++t clear
++: clear
++s,^[ ]*#[ ]*define[ ][ ]*\(\([^ (][^ (]*\)([^)]*)\)[ ]*\(.*\)$,${ac_dA}\2${ac_dB}\1${ac_dC}\3${ac_dD},gp
++t end
++s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
++: end
++EOF
++# If some macros were called several times there might be several times
++# the same #defines, which is useless. Nevertheless, we may not want to
++# sort them, since we want the *last* AC-DEFINE to be honored.
++uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
++sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
++rm -f confdef2sed.sed
+
+ # This sed command replaces #undef with comments. This is necessary, for
+ # example, in the case of _POSIX_SOURCE, which is predefined and required
+ # on some systems where configure will not decide to define it.
+-cat >> conftest.vals <<\EOF
+-s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
++cat >>conftest.undefs <<\EOF
++s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
+ EOF
+
+-# Break up conftest.vals because some shells have a limit on
+-# the size of here documents, and old seds have small limits too.
+-
++# Break up conftest.defines because some shells have a limit on the size
++# of here documents, and old seds have small limits too (100 cmds).
++echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
++echo ' if egrep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
++echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
++echo ' :' >>$CONFIG_STATUS
++rm -f conftest.tail
++while grep . conftest.defines >/dev/null
++do
++ # Write a limited-size here document to $tmp/defines.sed.
++ echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
++ # Speed up: don't consider the non `#define' lines.
++ echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
++ # Work around the forget-to-reset-the-flag bug.
++ echo 't clr' >>$CONFIG_STATUS
++ echo ': clr' >>$CONFIG_STATUS
++ sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
++ echo 'CEOF
++ sed -f $tmp/defines.sed $tmp/in >$tmp/out
++ rm -f $tmp/in
++ mv $tmp/out $tmp/in
++' >>$CONFIG_STATUS
++ sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
++ rm -f conftest.defines
++ mv conftest.tail conftest.defines
++done
++rm -f conftest.defines
++echo ' fi # egrep' >>$CONFIG_STATUS
++echo >>$CONFIG_STATUS
++
++# Break up conftest.undefs because some shells have a limit on the size
++# of here documents, and old seds have small limits too (100 cmds).
++echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
+ rm -f conftest.tail
+-while :
++while grep . conftest.undefs >/dev/null
+ do
+- ac_lines=`grep -c . conftest.vals`
+- # grep -c gives empty output for an empty file on some AIX systems.
+- if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
+- # Write a limited-size here document to conftest.frag.
+- echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
+- sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
++ # Write a limited-size here document to $tmp/undefs.sed.
++ echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
++ # Speed up: don't consider the non `#undef'
++ echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
++ # Work around the forget-to-reset-the-flag bug.
++ echo 't clr' >>$CONFIG_STATUS
++ echo ': clr' >>$CONFIG_STATUS
++ sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
+ echo 'CEOF
+- sed -f conftest.frag conftest.in > conftest.out
+- rm -f conftest.in
+- mv conftest.out conftest.in
+-' >> $CONFIG_STATUS
+- sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
+- rm -f conftest.vals
+- mv conftest.tail conftest.vals
+-done
+-rm -f conftest.vals
+-
+-cat >> $CONFIG_STATUS <<\EOF
+- rm -f conftest.frag conftest.h
+- echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
+- cat conftest.in >> conftest.h
+- rm -f conftest.in
+- if cmp -s $ac_file conftest.h 2>/dev/null; then
+- echo "$ac_file is unchanged"
+- rm -f conftest.h
++ sed -f $tmp/undefs.sed $tmp/in >$tmp/out
++ rm -f $tmp/in
++ mv $tmp/out $tmp/in
++' >>$CONFIG_STATUS
++ sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
++ rm -f conftest.undefs
++ mv conftest.tail conftest.undefs
++done
++rm -f conftest.undefs
++
++cat >>$CONFIG_STATUS <<\EOF
++ # Let's still pretend it is `configure' which instantiates (i.e., don't
++ # use $as_me), people would be surprised to read:
++ # /* config.h. Generated automatically by config.status. */
++ if test x"$ac_file" = x-; then
++ echo "/* Generated automatically by configure. */" >$tmp/config.h
+ else
+- # Remove last slash and all that follows it. Not all systems have dirname.
+- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
++ echo "/* $ac_file. Generated automatically by configure. */" >$tmp/config.h
++ fi
++ cat $tmp/in >>$tmp/config.h
++ rm -f $tmp/in
++ if test x"$ac_file" != x-; then
++ if cmp -s $ac_file $tmp/config.h 2>/dev/null; then
++ { echo "$as_me:8513: $ac_file is unchanged" >&5
++echo "$as_me: $ac_file is unchanged" >&6;}
++ else
++ ac_dir=`$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$ac_file" : 'X\(//\)[^/]' \| \
++ X"$ac_file" : 'X\(//\)$' \| \
++ X"$ac_file" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X"$ac_file" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++ /^X\(\/\/\)$/{ s//\1/; q; }
++ /^X\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
+ if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+- # The file is in a subdirectory.
+- test ! -d "$ac_dir" && mkdir "$ac_dir"
++ { case "$ac_dir" in
++ [\\/]* | ?:[\\/]* ) as_incr_dir=;;
++ *) as_incr_dir=.;;
++esac
++as_dummy="$ac_dir"
++for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
++ case $as_mkdir_dir in
++ # Skip DOS drivespec
++ ?:) as_incr_dir=$as_mkdir_dir ;;
++ *)
++ as_incr_dir=$as_incr_dir/$as_mkdir_dir
++ test -d "$as_incr_dir" || mkdir "$as_incr_dir"
++ ;;
++ esac
++done; }
++
++ fi
++ rm -f $ac_file
++ mv $tmp/config.h $ac_file
+ fi
+- rm -f $ac_file
+- mv conftest.h $ac_file
++ else
++ cat $tmp/config.h
++ rm -f $tmp/config.h
+ fi
+-fi; done
+-
++ # Run the commands associated with the file.
++ case $ac_file in
++ config.h ) # update the timestamp
++echo 'timestamp for config.h' >"./stamp-h1"
++ ;;
++ esac
++done
+ EOF
+-cat >> $CONFIG_STATUS <<EOF
++cat >>$CONFIG_STATUS <<\EOF
+
++#
++# CONFIG_COMMANDS section.
++#
++for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
++ ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
++ ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
++
++ case $ac_dest in
++ depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
++ # Strip MF so we end up with the name of the file.
++ mf=`echo "$mf" | sed -e 's/:.*$//'`
++ if (sed 1q $mf | fgrep 'generated by automake') > /dev/null 2>&1; then
++ dirpart=`$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$mf" : 'X\(//\)[^/]' \| \
++ X"$mf" : 'X\(//\)$' \| \
++ X"$mf" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X"$mf" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++ /^X\(\/\/\)$/{ s//\1/; q; }
++ /^X\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
++ else
++ continue
++ fi
++ grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
++ # Extract the definition of DEP_FILES from the Makefile without
++ # running `make'.
++ DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
++ test -z "$DEPDIR" && continue
++ # When using ansi2knr, U may be empty or an underscore; expand it
++ U=`sed -n -e '/^U = / s///p' < "$mf"`
++ test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
++ # We invoke sed twice because it is the simplest approach to
++ # changing $(DEPDIR) to its actual value in the expansion.
++ for file in `sed -n -e '
++ /^DEP_FILES = .*\\\\$/ {
++ s/^DEP_FILES = //
++ :loop
++ s/\\\\$//
++ p
++ n
++ /\\\\$/ b loop
++ p
++ }
++ /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
++ # Make sure the directory exists.
++ test -f "$dirpart/$file" && continue
++ fdir=`$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$file" : 'X\(//\)[^/]' \| \
++ X"$file" : 'X\(//\)$' \| \
++ X"$file" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X"$file" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++ /^X\(\/\/\)$/{ s//\1/; q; }
++ /^X\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
++ { case $dirpart/$fdir in
++ [\\/]* | ?:[\\/]* ) as_incr_dir=;;
++ *) as_incr_dir=.;;
++esac
++as_dummy=$dirpart/$fdir
++for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
++ case $as_mkdir_dir in
++ # Skip DOS drivespec
++ ?:) as_incr_dir=$as_mkdir_dir ;;
++ *)
++ as_incr_dir=$as_incr_dir/$as_mkdir_dir
++ test -d "$as_incr_dir" || mkdir "$as_incr_dir"
++ ;;
++ esac
++done; }
+
+-EOF
+-cat >> $CONFIG_STATUS <<\EOF
+-test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
+-case "$CONFIG_FILES" in
++ # echo "creating $dirpart/$file"
++ echo '# dummy' > "$dirpart/$file"
++ done
++done
++ ;;
++ default ) case "$CONFIG_FILES" in
+ *fribidi-config*)chmod +x fribidi-config;;
+-esac
+-exit 0
++esac ;;
++ esac
++done
++EOF
++
++cat >>$CONFIG_STATUS <<\EOF
++
++{ (exit 0); exit 0; }
+ EOF
+ chmod +x $CONFIG_STATUS
+-rm -fr confdefs* $ac_clean_files
+-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
++ac_clean_files=$ac_clean_files_save
++
++# configure is writing to config.log, and then calls config.status.
++# config.status does its own redirection, appending to config.log.
++# Unfortunately, on DOS this fails, as config.log is still kept open
++# by configure, so config.status won't be able to write to it; its
++# output is simply discarded. So we exec the FD to /dev/null,
++# effectively closing config.log, so it can be properly (re)opened and
++# appended to by config.status. When coming back to configure, we
++# need to make the FD available again.
++if test "$no_create" != yes; then
++ ac_cs_success=:
++ exec 5>/dev/null
++ $SHELL $CONFIG_STATUS || ac_cs_success=false
++ exec 5>>config.log
++ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
++ # would make configure fail if this is the last instruction.
++ $ac_cs_success || { (exit 1); exit 1; }
++fi
+
+diff -ruNa fribidi.old/depcomp fribidi/depcomp
+--- fribidi.old/depcomp Thu Jan 1 01:00:00 1970
++++ fribidi/depcomp Sun Jul 14 13:25:54 2002
+@@ -0,0 +1,436 @@
++#! /bin/sh
++
++# depcomp - compile a program generating dependencies as side-effects
++# Copyright 1999, 2000 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
++
++if test -z "$depmode" || test -z "$source" || test -z "$object"; then
++ echo "depcomp: Variables source, object and depmode must be set" 1>&2
++ exit 1
++fi
++# `libtool' can also be set to `yes' or `no'.
++
++if test -z "$depfile"; then
++ base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
++ dir=`echo "$object" | sed 's,/.*$,/,'`
++ if test "$dir" = "$object"; then
++ dir=
++ fi
++ # FIXME: should be _deps on DOS.
++ depfile="$dir.deps/$base"
++fi
++
++tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
++
++rm -f "$tmpdepfile"
++
++# Some modes work just like other modes, but use different flags. We
++# parameterize here, but still list the modes in the big case below,
++# to make depend.m4 easier to write. Note that we *cannot* use a case
++# here, because this file can only contain one case statement.
++if test "$depmode" = hp; then
++ # HP compiler uses -M and no extra arg.
++ gccflag=-M
++ depmode=gcc
++fi
++
++if test "$depmode" = dashXmstdout; then
++ # This is just like dashmstdout with a different argument.
++ dashmflag=-xM
++ depmode=dashmstdout
++fi
++
++case "$depmode" in
++gcc3)
++## gcc 3 implements dependency tracking that does exactly what
++## we want. Yay! Note: for some reason libtool 1.4 doesn't like
++## it if -MD -MP comes after the -MF stuff. Hmm.
++ "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
++ stat=$?
++ if test $stat -eq 0; then :
++ else
++ rm -f "$tmpdepfile"
++ exit $stat
++ fi
++ mv "$tmpdepfile" "$depfile"
++ ;;
++
++gcc)
++## There are various ways to get dependency output from gcc. Here's
++## why we pick this rather obscure method:
++## - Don't want to use -MD because we'd like the dependencies to end
++## up in a subdir. Having to rename by hand is ugly.
++## (We might end up doing this anyway to support other compilers.)
++## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
++## -MM, not -M (despite what the docs say).
++## - Using -M directly means running the compiler twice (even worse
++## than renaming).
++ if test -z "$gccflag"; then
++ gccflag=-MD,
++ fi
++ "$@" -Wp,"$gccflag$tmpdepfile"
++ stat=$?
++ if test $stat -eq 0; then :
++ else
++ rm -f "$tmpdepfile"
++ exit $stat
++ fi
++ rm -f "$depfile"
++ echo "$object : \\" > "$depfile"
++ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
++## The second -e expression handles DOS-style file names with drive letters.
++ sed -e 's/^[^:]*: / /' \
++ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
++## This next piece of magic avoids the `deleted header file' problem.
++## The problem is that when a header file which appears in a .P file
++## is deleted, the dependency causes make to die (because there is
++## typically no way to rebuild the header). We avoid this by adding
++## dummy dependencies for each header file. Too bad gcc doesn't do
++## this for us directly.
++ tr ' ' '
++' < "$tmpdepfile" |
++## Some versions of gcc put a space before the `:'. On the theory
++## that the space means something, we add a space to the output as
++## well.
++## Some versions of the HPUX 10.20 sed can't process this invocation
++## correctly. Breaking it into two sed invocations is a workaround.
++ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
++
++hp)
++ # This case exists only to let depend.m4 do its work. It works by
++ # looking at the text of this script. This case will never be run,
++ # since it is checked for above.
++ exit 1
++ ;;
++
++sgi)
++ if test "$libtool" = yes; then
++ "$@" "-Wp,-MDupdate,$tmpdepfile"
++ else
++ "$@" -MDupdate "$tmpdepfile"
++ fi
++ stat=$?
++ if test $stat -eq 0; then :
++ else
++ rm -f "$tmpdepfile"
++ exit $stat
++ fi
++ rm -f "$depfile"
++
++ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
++ echo "$object : \\" > "$depfile"
++
++ # Clip off the initial element (the dependent). Don't try to be
++ # clever and replace this with sed code, as IRIX sed won't handle
++ # lines with more than a fixed number of characters (4096 in
++ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
++ # the IRIX cc adds comments like `#:fec' to the end of the
++ # dependency line.
++ tr ' ' '
++' < "$tmpdepfile" \
++ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
++ tr '
++' ' ' >> $depfile
++ echo >> $depfile
++
++ # The second pass generates a dummy entry for each header file.
++ tr ' ' '
++' < "$tmpdepfile" \
++ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
++ >> $depfile
++ else
++ # The sourcefile does not contain any dependencies, so just
++ # store a dummy comment line, to avoid errors with the Makefile
++ # "include basename.Plo" scheme.
++ echo "#dummy" > "$depfile"
++ fi
++ rm -f "$tmpdepfile"
++ ;;
++
++aix)
++ # The C for AIX Compiler uses -M and outputs the dependencies
++ # in a .u file. This file always lives in the current directory.
++ # Also, the AIX compiler puts `$object:' at the start of each line;
++ # $object doesn't have directory information.
++ stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
++ tmpdepfile="$stripped.u"
++ outname="$stripped.o"
++ if test "$libtool" = yes; then
++ "$@" -Wc,-M
++ else
++ "$@" -M
++ fi
++
++ stat=$?
++ if test $stat -eq 0; then :
++ else
++ rm -f "$tmpdepfile"
++ exit $stat
++ fi
++
++ if test -f "$tmpdepfile"; then
++ # Each line is of the form `foo.o: dependent.h'.
++ # Do two passes, one to just change these to
++ # `$object: dependent.h' and one to simply `dependent.h:'.
++ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
++ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
++ else
++ # The sourcefile does not contain any dependencies, so just
++ # store a dummy comment line, to avoid errors with the Makefile
++ # "include basename.Plo" scheme.
++ echo "#dummy" > "$depfile"
++ fi
++ rm -f "$tmpdepfile"
++ ;;
++
++tru64)
++ # The Tru64 compiler uses -MD to generate dependencies as a side
++ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
++ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
++ # dependencies in `foo.d' instead, so we check for that too.
++ # Subdirectories are respected.
++
++ base=`echo "$object" | sed -e 's/\.o$//' -e 's/\.lo$//'`
++ tmpdepfile1="$base.o.d"
++ tmpdepfile2="$base.d"
++ if test "$libtool" = yes; then
++ "$@" -Wc,-MD
++ else
++ "$@" -MD
++ fi
++
++ stat=$?
++ if test $stat -eq 0; then :
++ else
++ rm -f "$tmpdepfile1" "$tmpdepfile2"
++ exit $stat
++ fi
++
++ if test -f "$tmpdepfile1"; then
++ tmpdepfile="$tmpdepfile1"
++ else
++ tmpdepfile="$tmpdepfile2"
++ fi
++ if test -f "$tmpdepfile"; then
++ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
++ # That's a space and a tab in the [].
++ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
++ else
++ echo "#dummy" > "$depfile"
++ fi
++ rm -f "$tmpdepfile"
++ ;;
++
++#nosideeffect)
++ # This comment above is used by automake to tell side-effect
++ # dependency tracking mechanisms from slower ones.
++
++dashmstdout)
++ # Important note: in order to support this mode, a compiler *must*
++ # always write the proprocessed file to stdout, regardless of -o,
++ # because we must use -o when running libtool.
++ test -z "$dashmflag" && dashmflag=-M
++ ( IFS=" "
++ case " $* " in
++ *" --mode=compile "*) # this is libtool, let us make it quiet
++ for arg
++ do # cycle over the arguments
++ case "$arg" in
++ "--mode=compile")
++ # insert --quiet before "--mode=compile"
++ set fnord "$@" --quiet
++ shift # fnord
++ ;;
++ esac
++ set fnord "$@" "$arg"
++ shift # fnord
++ shift # "$arg"
++ done
++ ;;
++ esac
++ "$@" $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
++ ) &
++ proc=$!
++ "$@"
++ stat=$?
++ wait "$proc"
++ if test "$stat" != 0; then exit $stat; fi
++ rm -f "$depfile"
++ cat < "$tmpdepfile" > "$depfile"
++ tr ' ' '
++' < "$tmpdepfile" | \
++## Some versions of the HPUX 10.20 sed can't process this invocation
++## correctly. Breaking it into two sed invocations is a workaround.
++ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
++
++dashXmstdout)
++ # This case only exists to satisfy depend.m4. It is never actually
++ # run, as this mode is specially recognized in the preamble.
++ exit 1
++ ;;
++
++makedepend)
++ # X makedepend
++ (
++ shift
++ cleared=no
++ for arg in "$@"; do
++ case $cleared in no)
++ set ""; shift
++ cleared=yes
++ esac
++ case "$arg" in
++ -D*|-I*)
++ set fnord "$@" "$arg"; shift;;
++ -*)
++ ;;
++ *)
++ set fnord "$@" "$arg"; shift;;
++ esac
++ done
++ obj_suffix="`echo $object | sed 's/^.*\././'`"
++ touch "$tmpdepfile"
++ ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
++ ) &
++ proc=$!
++ "$@"
++ stat=$?
++ wait "$proc"
++ if test "$stat" != 0; then exit $stat; fi
++ rm -f "$depfile"
++ cat < "$tmpdepfile" > "$depfile"
++ sed '1,2d' "$tmpdepfile" | tr ' ' '
++' | \
++## Some versions of the HPUX 10.20 sed can't process this invocation
++## correctly. Breaking it into two sed invocations is a workaround.
++ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
++ rm -f "$tmpdepfile" "$tmpdepfile".bak
++ ;;
++
++cpp)
++ # Important note: in order to support this mode, a compiler *must*
++ # always write the proprocessed file to stdout, regardless of -o,
++ # because we must use -o when running libtool.
++ ( IFS=" "
++ case " $* " in
++ *" --mode=compile "*)
++ for arg
++ do # cycle over the arguments
++ case $arg in
++ "--mode=compile")
++ # insert --quiet before "--mode=compile"
++ set fnord "$@" --quiet
++ shift # fnord
++ ;;
++ esac
++ set fnord "$@" "$arg"
++ shift # fnord
++ shift # "$arg"
++ done
++ ;;
++ esac
++ "$@" -E |
++ sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
++ sed '$ s: \\$::' > "$tmpdepfile"
++ ) &
++ proc=$!
++ "$@"
++ stat=$?
++ wait "$proc"
++ if test "$stat" != 0; then exit $stat; fi
++ rm -f "$depfile"
++ echo "$object : \\" > "$depfile"
++ cat < "$tmpdepfile" >> "$depfile"
++ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
++
++msvisualcpp)
++ # Important note: in order to support this mode, a compiler *must*
++ # always write the proprocessed file to stdout, regardless of -o,
++ # because we must use -o when running libtool.
++ ( IFS=" "
++ case " $* " in
++ *" --mode=compile "*)
++ for arg
++ do # cycle over the arguments
++ case $arg in
++ "--mode=compile")
++ # insert --quiet before "--mode=compile"
++ set fnord "$@" --quiet
++ shift # fnord
++ ;;
++ esac
++ set fnord "$@" "$arg"
++ shift # fnord
++ shift # "$arg"
++ done
++ ;;
++ esac
++ for arg
++ do
++ case "$arg" in
++ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
++ set fnord "$@"
++ shift
++ shift
++ ;;
++ *)
++ set fnord "$@" "$arg"
++ shift
++ shift
++ ;;
++ esac
++ done
++ "$@" -E |
++ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
++ ) &
++ proc=$!
++ "$@"
++ stat=$?
++ wait "$proc"
++ if test "$stat" != 0; then exit $stat; fi
++ rm -f "$depfile"
++ echo "$object : \\" > "$depfile"
++ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
++ echo " " >> "$depfile"
++ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
++
++none)
++ exec "$@"
++ ;;
++
++*)
++ echo "Unknown depmode $depmode" 1>&2
++ exit 1
++ ;;
++esac
++
++exit 0
projects / vlc / commitdiff