]> git.sesse.net Git - vlc/commitdiff
* ./modules/codec/a52old/a52old.c: ported the old A52 decoder to aout3.
authorSam Hocevar <sam@videolan.org>
Wed, 21 Aug 2002 09:27:40 +0000 (09:27 +0000)
committerSam Hocevar <sam@videolan.org>
Wed, 21 Aug 2002 09:27:40 +0000 (09:27 +0000)
  * ./modules/audio_filter/converter/s16tofloat32.c: converter needed for
    a52old, includes the walken trick and b_in_place = true.

configure
configure.in
modules/audio_filter/converter/Makefile
modules/audio_filter/converter/s16tofloat32.c [new file with mode: 0644]
modules/codec/a52old/a52old.c
modules/codec/a52old/adec.h
modules/codec/a52old/downmix/downmix.c
modules/codec/a52old/imdct/imdct.c

index f4e0ad7a277b7b9e3e0d5bd61705b91e6da1fee4..2f40892c10a323bf203f7750c4a328925b16d8e9 100755 (executable)
--- a/configure
+++ b/configure
@@ -116,6 +116,8 @@ ac_help="$ac_help
   --enable-fb             Linux framebuffer support (default enabled on Linux)"
 ac_help="$ac_help
   --enable-mga            Linux kernel Matrox support (default disabled)"
+ac_help="$ac_help
+  --enable-svgalib        SVGAlib support (default disabled)"
 ac_help="$ac_help
   --enable-ggi            GGI support (default disabled)"
 ac_help="$ac_help
@@ -744,7 +746,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:748: checking host system type" >&5
+echo "configure:750: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -765,7 +767,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:769: checking target system type" >&5
+echo "configure:771: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -783,7 +785,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:787: checking build system type" >&5
+echo "configure:789: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -817,7 +819,7 @@ save_CFLAGS="${CFLAGS}"
 save_LDFLAGS="${LDFLAGS}"
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:821: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:823: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -846,7 +848,7 @@ fi
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:850: checking for $ac_word" >&5
+echo "configure:852: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -876,7 +878,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:880: checking for $ac_word" >&5
+echo "configure:882: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -927,7 +929,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:931: checking for $ac_word" >&5
+echo "configure:933: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -959,7 +961,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:963: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:965: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -970,12 +972,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 974 "configure"
+#line 976 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:979: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:981: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1001,12 +1003,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1005: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1007: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1010: checking whether we are using GNU C" >&5
+echo "configure:1012: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1015,7 +1017,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1019: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1021: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1034,7 +1036,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1038: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1040: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1066,7 +1068,7 @@ else
 fi
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1070: checking how to run the C preprocessor" >&5
+echo "configure:1072: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -1081,13 +1083,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 1085 "configure"
+#line 1087 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1091: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1093: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1098,13 +1100,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 1102 "configure"
+#line 1104 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1108: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1110: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1115,13 +1117,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 1119 "configure"
+#line 1121 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1125: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1127: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1155,7 +1157,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1159: checking for $ac_word" >&5
+echo "configure:1161: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1187,7 +1189,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1191: checking for $ac_word" >&5
+echo "configure:1193: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1222,7 +1224,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1226: checking for $ac_word" >&5
+echo "configure:1228: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1254,7 +1256,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1258: checking for $ac_word" >&5
+echo "configure:1260: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1290,7 +1292,7 @@ fi
 # Extract the first word of "gmake", so it can be a program name with args.
 set dummy gmake; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1294: checking for $ac_word" >&5
+echo "configure:1296: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMAKE'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1325,7 +1327,7 @@ fi
 
 if test "x${GMAKE}" = "xno"; then
   echo $ac_n "checking whether GNU make is installed""... $ac_c" 1>&6
-echo "configure:1329: checking whether GNU make is installed" >&5
+echo "configure:1331: checking whether GNU make is installed" >&5
 if eval "test \"`echo '$''{'ac_cv_gmake'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1357,7 +1359,7 @@ EOF
 # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1361: checking for $ac_word" >&5
+echo "configure:1363: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1386,7 +1388,7 @@ fi
 
 
         echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
-echo "configure:1390: checking for strerror in -lcposix" >&5
+echo "configure:1392: checking for strerror in -lcposix" >&5
 ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1394,7 +1396,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lcposix  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 1398 "configure"
+#line 1400 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -1405,7 +1407,7 @@ int main() {
 strerror()
 ; return 0; }
 EOF
-if { (eval echo configure:1409: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1411: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -1428,12 +1430,12 @@ fi
   
 
 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1432: checking for ANSI C header files" >&5
+echo "configure:1434: checking for ANSI C header files" >&5
 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1437 "configure"
+#line 1439 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
@@ -1441,7 +1443,7 @@ else
 #include <float.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1445: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1447: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1458,7 +1460,7 @@ rm -f conftest*
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 1462 "configure"
+#line 1464 "configure"
 #include "confdefs.h"
 #include <string.h>
 EOF
@@ -1476,7 +1478,7 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 1480 "configure"
+#line 1482 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
@@ -1497,7 +1499,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 1501 "configure"
+#line 1503 "configure"
 #include "confdefs.h"
 #include <ctype.h>
 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -1508,7 +1510,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
 exit (0); }
 
 EOF
-if { (eval echo configure:1512: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1514: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -1532,12 +1534,12 @@ EOF
 fi
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1536: checking for working const" >&5
+echo "configure:1538: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1541 "configure"
+#line 1543 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -1586,7 +1588,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:1590: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1592: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -1607,21 +1609,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1611: checking for inline" >&5
+echo "configure:1613: checking for inline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 1618 "configure"
+#line 1620 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:1625: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1627: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -1647,12 +1649,12 @@ EOF
 esac
 
 echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:1651: checking for off_t" >&5
+echo "configure:1653: checking for off_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1656 "configure"
+#line 1658 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -1680,12 +1682,12 @@ EOF
 fi
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:1684: checking for size_t" >&5
+echo "configure:1686: checking for size_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1689 "configure"
+#line 1691 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -1715,19 +1717,19 @@ fi
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:1719: checking for working alloca.h" >&5
+echo "configure:1721: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1724 "configure"
+#line 1726 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:1731: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1733: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -1748,12 +1750,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:1752: checking for alloca" >&5
+echo "configure:1754: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1757 "configure"
+#line 1759 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -1781,7 +1783,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:1785: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1787: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -1813,12 +1815,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:1817: checking whether alloca needs Cray hooks" >&5
+echo "configure:1819: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1822 "configure"
+#line 1824 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -1843,12 +1845,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1847: checking for $ac_func" >&5
+echo "configure:1849: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1852 "configure"
+#line 1854 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -1871,7 +1873,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:1875: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1877: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -1898,7 +1900,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:1902: checking stack direction for C alloca" >&5
+echo "configure:1904: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1906,7 +1908,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 1910 "configure"
+#line 1912 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -1925,7 +1927,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:1929: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1931: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -1950,17 +1952,17 @@ for ac_hdr in unistd.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1954: checking for $ac_hdr" >&5
+echo "configure:1956: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1959 "configure"
+#line 1961 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1964: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1966: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1989,12 +1991,12 @@ done
 for ac_func in getpagesize
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1993: checking for $ac_func" >&5
+echo "configure:1995: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1998 "configure"
+#line 2000 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2017,7 +2019,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2021: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2023: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2042,7 +2044,7 @@ fi
 done
 
 echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:2046: checking for working mmap" >&5
+echo "configure:2048: checking for working mmap" >&5
 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2050,7 +2052,7 @@ else
   ac_cv_func_mmap_fixed_mapped=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 2054 "configure"
+#line 2056 "configure"
 #include "confdefs.h"
 
 /* Thanks to Mike Haertel and Jim Avera for this test.
@@ -2190,7 +2192,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:2194: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2196: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_fixed_mapped=yes
 else
@@ -2214,12 +2216,12 @@ fi
 
 
     echo $ac_n "checking whether we are using the GNU C Library 2.1 or newer""... $ac_c" 1>&6
-echo "configure:2218: checking whether we are using the GNU C Library 2.1 or newer" >&5
+echo "configure:2220: checking whether we are using the GNU C Library 2.1 or newer" >&5
 if eval "test \"`echo '$''{'ac_cv_gnu_library_2_1'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2223 "configure"
+#line 2225 "configure"
 #include "confdefs.h"
 
 #include <features.h>
@@ -2255,17 +2257,17 @@ stdlib.h string.h unistd.h sys/param.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2259: checking for $ac_hdr" >&5
+echo "configure:2261: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2264 "configure"
+#line 2266 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2269: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2271: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2296,12 +2298,12 @@ getgid getuid mempcpy munmap putenv setenv setlocale stpcpy strchr strcasecmp \
 strdup strtoul tsearch __argz_count __argz_stringify __argz_next
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2300: checking for $ac_func" >&5
+echo "configure:2302: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2305 "configure"
+#line 2307 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2324,7 +2326,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2328: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2330: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2364,7 +2366,7 @@ fi
 
 
   echo $ac_n "checking for iconv""... $ac_c" 1>&6
-echo "configure:2368: checking for iconv" >&5
+echo "configure:2370: checking for iconv" >&5
 if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2372,7 +2374,7 @@ else
     am_cv_func_iconv="no, consider installing GNU libiconv"
     am_cv_lib_iconv=no
     cat > conftest.$ac_ext <<EOF
-#line 2376 "configure"
+#line 2378 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <iconv.h>
@@ -2382,7 +2384,7 @@ iconv_t cd = iconv_open("","");
        iconv_close(cd);
 ; return 0; }
 EOF
-if { (eval echo configure:2386: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2388: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_func_iconv=yes
 else
@@ -2394,7 +2396,7 @@ rm -f conftest*
       am_save_LIBS="$LIBS"
       LIBS="$LIBS -liconv"
       cat > conftest.$ac_ext <<EOF
-#line 2398 "configure"
+#line 2400 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <iconv.h>
@@ -2404,7 +2406,7 @@ iconv_t cd = iconv_open("","");
          iconv_close(cd);
 ; return 0; }
 EOF
-if { (eval echo configure:2408: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2410: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_lib_iconv=yes
         am_cv_func_iconv=yes
@@ -2425,13 +2427,13 @@ echo "$ac_t""$am_cv_func_iconv" 1>&6
 EOF
 
     echo $ac_n "checking for iconv declaration""... $ac_c" 1>&6
-echo "configure:2429: checking for iconv declaration" >&5
+echo "configure:2431: checking for iconv declaration" >&5
     if eval "test \"`echo '$''{'am_cv_proto_iconv'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   
       cat > conftest.$ac_ext <<EOF
-#line 2435 "configure"
+#line 2437 "configure"
 #include "confdefs.h"
 
 #include <stdlib.h>
@@ -2450,7 +2452,7 @@ int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:2454: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2456: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   am_cv_proto_iconv_arg1=""
 else
@@ -2479,19 +2481,19 @@ EOF
 
    
   echo $ac_n "checking for nl_langinfo and CODESET""... $ac_c" 1>&6
-echo "configure:2483: checking for nl_langinfo and CODESET" >&5
+echo "configure:2485: checking for nl_langinfo and CODESET" >&5
 if eval "test \"`echo '$''{'am_cv_langinfo_codeset'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2488 "configure"
+#line 2490 "configure"
 #include "confdefs.h"
 #include <langinfo.h>
 int main() {
 char* cs = nl_langinfo(CODESET);
 ; return 0; }
 EOF
-if { (eval echo configure:2495: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2497: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_langinfo_codeset=yes
 else
@@ -2514,19 +2516,19 @@ EOF
 
    if test $ac_cv_header_locale_h = yes; then
     echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:2518: checking for LC_MESSAGES" >&5
+echo "configure:2520: checking for LC_MESSAGES" >&5
 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2523 "configure"
+#line 2525 "configure"
 #include "confdefs.h"
 #include <locale.h>
 int main() {
 return LC_MESSAGES
 ; return 0; }
 EOF
-if { (eval echo configure:2530: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2532: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_val_LC_MESSAGES=yes
 else
@@ -2547,7 +2549,7 @@ EOF
     fi
   fi
    echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:2551: checking whether NLS is requested" >&5
+echo "configure:2553: checking whether NLS is requested" >&5
         # Check whether --enable-nls or --disable-nls was given.
 if test "${enable_nls+set}" = set; then
   enableval="$enable_nls"
@@ -2569,7 +2571,7 @@ fi
 EOF
 
       echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:2573: checking whether included gettext is requested" >&5
+echo "configure:2575: checking whether included gettext is requested" >&5
       # Check whether --with-included-gettext or --without-included-gettext was given.
 if test "${with_included_gettext+set}" = set; then
   withval="$with_included_gettext"
@@ -2589,17 +2591,17 @@ fi
 
        ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:2593: checking for libintl.h" >&5
+echo "configure:2595: checking for libintl.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2598 "configure"
+#line 2600 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2603: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2605: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2616,12 +2618,12 @@ fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for GNU gettext in libc""... $ac_c" 1>&6
-echo "configure:2620: checking for GNU gettext in libc" >&5
+echo "configure:2622: checking for GNU gettext in libc" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gnugettext1_libc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2625 "configure"
+#line 2627 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 extern int _nl_msg_cat_cntr;
@@ -2630,7 +2632,7 @@ bindtextdomain ("", "");
 return (int) gettext ("") + _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:2634: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2636: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gnugettext1_libc=yes
 else
@@ -2646,14 +2648,14 @@ echo "$ac_t""$gt_cv_func_gnugettext1_libc" 1>&6
 
           if test "$gt_cv_func_gnugettext1_libc" != "yes"; then
             echo $ac_n "checking for GNU gettext in libintl""... $ac_c" 1>&6
-echo "configure:2650: checking for GNU gettext in libintl" >&5
+echo "configure:2652: checking for GNU gettext in libintl" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gnugettext1_libintl'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   gt_save_LIBS="$LIBS"
                LIBS="$LIBS -lintl $LIBICONV"
                cat > conftest.$ac_ext <<EOF
-#line 2657 "configure"
+#line 2659 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 extern int _nl_msg_cat_cntr;
@@ -2662,7 +2664,7 @@ bindtextdomain ("", "");
 return (int) gettext ("") + _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:2666: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2668: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gnugettext1_libintl=yes
 else
@@ -2695,12 +2697,12 @@ EOF
             for ac_func in dcgettext
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2699: checking for $ac_func" >&5
+echo "configure:2701: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2704 "configure"
+#line 2706 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2723,7 +2725,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2727: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2729: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2752,7 +2754,7 @@ done
                     # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2756: checking for $ac_word" >&5
+echo "configure:2758: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2786,7 +2788,7 @@ fi
             # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2790: checking for $ac_word" >&5
+echo "configure:2792: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2823,7 +2825,7 @@ fi
                     # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2827: checking for $ac_word" >&5
+echo "configure:2829: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2873,7 +2875,7 @@ fi
         # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2877: checking for $ac_word" >&5
+echo "configure:2879: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2907,7 +2909,7 @@ fi
         # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2911: checking for $ac_word" >&5
+echo "configure:2913: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2943,7 +2945,7 @@ fi
         # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2947: checking for $ac_word" >&5
+echo "configure:2949: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3014,7 +3016,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3018: checking for $ac_word" >&5
+echo "configure:3020: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_INTLBISON'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3047,7 +3049,7 @@ done
       ac_verc_fail=yes
     else
             echo $ac_n "checking version of bison""... $ac_c" 1>&6
-echo "configure:3051: checking version of bison" >&5
+echo "configure:3053: checking version of bison" >&5
       ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
       case $ac_prog_version in
         '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
@@ -3094,7 +3096,7 @@ echo "configure:3051: checking version of bison" >&5
        LINGUAS=
      else
        echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:3098: checking for catalogs to be installed" >&5
+echo "configure:3100: checking for catalogs to be installed" >&5
        NEW_LINGUAS=
        for presentlang in $ALL_LINGUAS; do
          useit=no
@@ -3146,7 +3148,7 @@ echo "configure:3098: checking for catalogs to be installed" >&5
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:3150: checking for a BSD compatible install" >&5
+echo "configure:3152: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3200,12 +3202,12 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:3204: checking for working const" >&5
+echo "configure:3206: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3209 "configure"
+#line 3211 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -3254,7 +3256,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:3258: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3260: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -3275,21 +3277,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:3279: checking for inline" >&5
+echo "configure:3281: checking for inline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 3286 "configure"
+#line 3288 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:3293: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3295: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -3344,7 +3346,7 @@ case "x${target_os}" in
     # Extract the first word of "${ac_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ac_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3348: checking for $ac_word" >&5
+echo "configure:3350: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3376,7 +3378,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3380: checking for $ac_word" >&5
+echo "configure:3382: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3450,12 +3452,12 @@ save_CFLAGS="${save_CFLAGS} -DSYS_`echo ${SYS} | sed -e 's/-.*//' | tr 'abcdefgh
 for ac_func in gettimeofday select strerror strtod strtol isatty vasprintf swab sigrelse getpwuid memalign posix_memalign gethostbyname2 atoll strndup
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3454: checking for $ac_func" >&5
+echo "configure:3456: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3459 "configure"
+#line 3461 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3478,7 +3480,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3482: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3484: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3504,12 +3506,12 @@ done
 
 
 echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:3508: checking for connect" >&5
+echo "configure:3510: checking for connect" >&5
 if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3513 "configure"
+#line 3515 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char connect(); below.  */
@@ -3532,7 +3534,7 @@ connect();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3536: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3538: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_connect=yes"
 else
@@ -3551,7 +3553,7 @@ else
   echo "$ac_t""no" 1>&6
 
   echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
-echo "configure:3555: checking for connect in -lsocket" >&5
+echo "configure:3557: checking for connect in -lsocket" >&5
 ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3559,7 +3561,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lsocket  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3563 "configure"
+#line 3565 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3570,7 +3572,7 @@ int main() {
 connect()
 ; return 0; }
 EOF
-if { (eval echo configure:3574: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3576: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3595,12 +3597,12 @@ fi
 fi
 
 echo $ac_n "checking for send""... $ac_c" 1>&6
-echo "configure:3599: checking for send" >&5
+echo "configure:3601: checking for send" >&5
 if eval "test \"`echo '$''{'ac_cv_func_send'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3604 "configure"
+#line 3606 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char send(); below.  */
@@ -3623,7 +3625,7 @@ send();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3627: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3629: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_send=yes"
 else
@@ -3642,7 +3644,7 @@ else
   echo "$ac_t""no" 1>&6
 
   echo $ac_n "checking for send in -lsocket""... $ac_c" 1>&6
-echo "configure:3646: checking for send in -lsocket" >&5
+echo "configure:3648: checking for send in -lsocket" >&5
 ac_lib_var=`echo socket'_'send | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3650,7 +3652,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lsocket  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3654 "configure"
+#line 3656 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3661,7 +3663,7 @@ int main() {
 send()
 ; return 0; }
 EOF
-if { (eval echo configure:3665: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3667: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3685,12 +3687,12 @@ fi
 fi
 
 echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:3689: checking for gethostbyname" >&5
+echo "configure:3691: checking for gethostbyname" >&5
 if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3694 "configure"
+#line 3696 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char gethostbyname(); below.  */
@@ -3713,7 +3715,7 @@ gethostbyname();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3717: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3719: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_gethostbyname=yes"
 else
@@ -3732,7 +3734,7 @@ else
   echo "$ac_t""no" 1>&6
 
   echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:3736: checking for gethostbyname in -lnsl" >&5
+echo "configure:3738: checking for gethostbyname in -lnsl" >&5
 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3740,7 +3742,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lnsl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3744 "configure"
+#line 3746 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3751,7 +3753,7 @@ int main() {
 gethostbyname()
 ; return 0; }
 EOF
-if { (eval echo configure:3755: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3757: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3771,7 +3773,7 @@ else
   echo "$ac_t""no" 1>&6
 
     echo $ac_n "checking for gethostbyname in -lbind""... $ac_c" 1>&6
-echo "configure:3775: checking for gethostbyname in -lbind" >&5
+echo "configure:3777: checking for gethostbyname in -lbind" >&5
 ac_lib_var=`echo bind'_'gethostbyname | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3779,7 +3781,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lbind  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3783 "configure"
+#line 3785 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3790,7 +3792,7 @@ int main() {
 gethostbyname()
 ; return 0; }
 EOF
-if { (eval echo configure:3794: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3796: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3817,12 +3819,12 @@ fi
 
 have_nanosleep=0
 echo $ac_n "checking for nanosleep""... $ac_c" 1>&6
-echo "configure:3821: checking for nanosleep" >&5
+echo "configure:3823: checking for nanosleep" >&5
 if eval "test \"`echo '$''{'ac_cv_func_nanosleep'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3826 "configure"
+#line 3828 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char nanosleep(); below.  */
@@ -3845,7 +3847,7 @@ nanosleep();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3849: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3851: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_nanosleep=yes"
 else
@@ -3864,7 +3866,7 @@ else
   echo "$ac_t""no" 1>&6
 
   echo $ac_n "checking for nanosleep in -lrt""... $ac_c" 1>&6
-echo "configure:3868: checking for nanosleep in -lrt" >&5
+echo "configure:3870: checking for nanosleep in -lrt" >&5
 ac_lib_var=`echo rt'_'nanosleep | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3872,7 +3874,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lrt  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3876 "configure"
+#line 3878 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3883,7 +3885,7 @@ int main() {
 nanosleep()
 ; return 0; }
 EOF
-if { (eval echo configure:3887: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3889: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3902,7 +3904,7 @@ if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for nanosleep in -lposix4""... $ac_c" 1>&6
-echo "configure:3906: checking for nanosleep in -lposix4" >&5
+echo "configure:3908: checking for nanosleep in -lposix4" >&5
 ac_lib_var=`echo posix4'_'nanosleep | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3910,7 +3912,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lposix4  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3914 "configure"
+#line 3916 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3921,7 +3923,7 @@ int main() {
 nanosleep()
 ; return 0; }
 EOF
-if { (eval echo configure:3925: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3927: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3955,7 +3957,7 @@ EOF
 fi
 # HP/UX port
 echo $ac_n "checking for sem_init in -lrt""... $ac_c" 1>&6
-echo "configure:3959: checking for sem_init in -lrt" >&5
+echo "configure:3961: checking for sem_init in -lrt" >&5
 ac_lib_var=`echo rt'_'sem_init | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3963,7 +3965,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lrt  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3967 "configure"
+#line 3969 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3974,7 +3976,7 @@ int main() {
 sem_init()
 ; return 0; }
 EOF
-if { (eval echo configure:3978: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3980: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3996,12 +3998,12 @@ fi
 
 
 echo $ac_n "checking for inet_aton""... $ac_c" 1>&6
-echo "configure:4000: checking for inet_aton" >&5
+echo "configure:4002: checking for inet_aton" >&5
 if eval "test \"`echo '$''{'ac_cv_func_inet_aton'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4005 "configure"
+#line 4007 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char inet_aton(); below.  */
@@ -4024,7 +4026,7 @@ inet_aton();
 
 ; return 0; }
 EOF
-if { (eval echo configure:4028: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4030: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_inet_aton=yes"
 else
@@ -4043,7 +4045,7 @@ else
   echo "$ac_t""no" 1>&6
 
   echo $ac_n "checking for inet_aton in -lresolv""... $ac_c" 1>&6
-echo "configure:4047: checking for inet_aton in -lresolv" >&5
+echo "configure:4049: checking for inet_aton in -lresolv" >&5
 ac_lib_var=`echo resolv'_'inet_aton | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4051,7 +4053,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lresolv  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4055 "configure"
+#line 4057 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4062,7 +4064,7 @@ int main() {
 inet_aton()
 ; return 0; }
 EOF
-if { (eval echo configure:4066: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4068: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4086,12 +4088,12 @@ fi
 fi
 
 echo $ac_n "checking for textdomain""... $ac_c" 1>&6
-echo "configure:4090: checking for textdomain" >&5
+echo "configure:4092: checking for textdomain" >&5
 if eval "test \"`echo '$''{'ac_cv_func_textdomain'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4095 "configure"
+#line 4097 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char textdomain(); below.  */
@@ -4114,7 +4116,7 @@ textdomain();
 
 ; return 0; }
 EOF
-if { (eval echo configure:4118: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4120: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_textdomain=yes"
 else
@@ -4133,7 +4135,7 @@ else
   echo "$ac_t""no" 1>&6
 
   echo $ac_n "checking for textdomain in -lintl""... $ac_c" 1>&6
-echo "configure:4137: checking for textdomain in -lintl" >&5
+echo "configure:4139: checking for textdomain in -lintl" >&5
 ac_lib_var=`echo intl'_'textdomain | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4141,7 +4143,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4145 "configure"
+#line 4147 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4152,7 +4154,7 @@ int main() {
 textdomain()
 ; return 0; }
 EOF
-if { (eval echo configure:4156: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4180,12 +4182,12 @@ fi
 
 NEED_GETOPT=0
 echo $ac_n "checking for getopt_long""... $ac_c" 1>&6
-echo "configure:4184: checking for getopt_long" >&5
+echo "configure:4186: checking for getopt_long" >&5
 if eval "test \"`echo '$''{'ac_cv_func_getopt_long'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4189 "configure"
+#line 4191 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char getopt_long(); below.  */
@@ -4208,7 +4210,7 @@ getopt_long();
 
 ; return 0; }
 EOF
-if { (eval echo configure:4212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_getopt_long=yes"
 else
@@ -4230,7 +4232,7 @@ else
   echo "$ac_t""no" 1>&6
  # FreeBSD has a gnugetopt library for this:
   echo $ac_n "checking for getopt_long in -lgnugetopt""... $ac_c" 1>&6
-echo "configure:4234: checking for getopt_long in -lgnugetopt" >&5
+echo "configure:4236: checking for getopt_long in -lgnugetopt" >&5
 ac_lib_var=`echo gnugetopt'_'getopt_long | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4238,7 +4240,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lgnugetopt  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4242 "configure"
+#line 4244 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4249,7 +4251,7 @@ int main() {
 getopt_long()
 ; return 0; }
 EOF
-if { (eval echo configure:4253: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4255: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4277,12 +4279,12 @@ fi
 
 
 echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:4281: checking return type of signal handlers" >&5
+echo "configure:4283: checking return type of signal handlers" >&5
 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4286 "configure"
+#line 4288 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <signal.h>
@@ -4299,7 +4301,7 @@ int main() {
 int i;
 ; return 0; }
 EOF
-if { (eval echo configure:4303: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4305: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_type_signal=void
 else
@@ -4318,7 +4320,7 @@ EOF
 
 
 echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:4322: checking for dlopen in -ldl" >&5
+echo "configure:4324: checking for dlopen in -ldl" >&5
 ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4326,7 +4328,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-ldl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4330 "configure"
+#line 4332 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4337,7 +4339,7 @@ int main() {
 dlopen()
 ; return 0; }
 EOF
-if { (eval echo configure:4341: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4343: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4358,7 +4360,7 @@ else
 fi
 
 echo $ac_n "checking for cos in -lm""... $ac_c" 1>&6
-echo "configure:4362: checking for cos in -lm" >&5
+echo "configure:4364: checking for cos in -lm" >&5
 ac_lib_var=`echo m'_'cos | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4366,7 +4368,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lm  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4370 "configure"
+#line 4372 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4377,7 +4379,7 @@ int main() {
 cos()
 ; return 0; }
 EOF
-if { (eval echo configure:4381: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4383: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4399,7 +4401,7 @@ else
 fi
 
 echo $ac_n "checking for pow in -lm""... $ac_c" 1>&6
-echo "configure:4403: checking for pow in -lm" >&5
+echo "configure:4405: checking for pow in -lm" >&5
 ac_lib_var=`echo m'_'pow | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4407,7 +4409,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lm  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4411 "configure"
+#line 4413 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4418,7 +4420,7 @@ int main() {
 pow()
 ; return 0; }
 EOF
-if { (eval echo configure:4422: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4424: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4448,7 +4450,7 @@ fi
 THREAD_LIB=error
 if test "x${THREAD_LIB}" = "xerror"; then
   echo $ac_n "checking for main in -lpthread""... $ac_c" 1>&6
-echo "configure:4452: checking for main in -lpthread" >&5
+echo "configure:4454: checking for main in -lpthread" >&5
 ac_lib_var=`echo pthread'_'main | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4456,14 +4458,14 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lpthread  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4460 "configure"
+#line 4462 "configure"
 #include "confdefs.h"
 
 int main() {
 main()
 ; return 0; }
 EOF
-if { (eval echo configure:4467: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4469: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4486,7 +4488,7 @@ fi
 fi
 if test "x${THREAD_LIB}" = "xerror"; then
   echo $ac_n "checking for main in -lpthreads""... $ac_c" 1>&6
-echo "configure:4490: checking for main in -lpthreads" >&5
+echo "configure:4492: checking for main in -lpthreads" >&5
 ac_lib_var=`echo pthreads'_'main | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4494,14 +4496,14 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lpthreads  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4498 "configure"
+#line 4500 "configure"
 #include "confdefs.h"
 
 int main() {
 main()
 ; return 0; }
 EOF
-if { (eval echo configure:4505: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4507: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4524,7 +4526,7 @@ fi
 fi
 if test "x${THREAD_LIB}" = "xerror"; then
   echo $ac_n "checking for main in -lc_r""... $ac_c" 1>&6
-echo "configure:4528: checking for main in -lc_r" >&5
+echo "configure:4530: checking for main in -lc_r" >&5
 ac_lib_var=`echo c_r'_'main | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4532,14 +4534,14 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lc_r  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4536 "configure"
+#line 4538 "configure"
 #include "confdefs.h"
 
 int main() {
 main()
 ; return 0; }
 EOF
-if { (eval echo configure:4543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4545: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4562,12 +4564,12 @@ fi
 fi
 if test "x${THREAD_LIB}" = "xerror"; then
   echo $ac_n "checking for pthread_mutex_lock""... $ac_c" 1>&6
-echo "configure:4566: checking for pthread_mutex_lock" >&5
+echo "configure:4568: checking for pthread_mutex_lock" >&5
 if eval "test \"`echo '$''{'ac_cv_func_pthread_mutex_lock'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4571 "configure"
+#line 4573 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char pthread_mutex_lock(); below.  */
@@ -4590,7 +4592,7 @@ pthread_mutex_lock();
 
 ; return 0; }
 EOF
-if { (eval echo configure:4594: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4596: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_pthread_mutex_lock=yes"
 else
@@ -4613,7 +4615,7 @@ fi
 fi
 
 echo $ac_n "checking for cthread_fork in -lthreads""... $ac_c" 1>&6
-echo "configure:4617: checking for cthread_fork in -lthreads" >&5
+echo "configure:4619: checking for cthread_fork in -lthreads" >&5
 ac_lib_var=`echo threads'_'cthread_fork | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4621,7 +4623,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lthreads  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4625 "configure"
+#line 4627 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4632,7 +4634,7 @@ int main() {
 cthread_fork()
 ; return 0; }
 EOF
-if { (eval echo configure:4636: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4638: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4654,7 +4656,7 @@ fi
 
 
 cat > conftest.$ac_ext <<EOF
-#line 4658 "configure"
+#line 4660 "configure"
 #include "confdefs.h"
 #include <pthread.h>
 EOF
@@ -4670,7 +4672,7 @@ fi
 rm -f conftest*
 
 cat > conftest.$ac_ext <<EOF
-#line 4674 "configure"
+#line 4676 "configure"
 #include "confdefs.h"
 #include <pthread.h>
 EOF
@@ -4686,7 +4688,7 @@ fi
 rm -f conftest*
 
 cat > conftest.$ac_ext <<EOF
-#line 4690 "configure"
+#line 4692 "configure"
 #include "confdefs.h"
 #include <strings.h>
 EOF
@@ -4706,17 +4708,17 @@ for ac_hdr in stdint.h getopt.h strings.h inttypes.h sys/int_types.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4710: checking for $ac_hdr" >&5
+echo "configure:4712: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4715 "configure"
+#line 4717 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4720: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4722: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4746,17 +4748,17 @@ for ac_hdr in sys/sockio.h fcntl.h sys/types.h sys/time.h sys/times.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4750: checking for $ac_hdr" >&5
+echo "configure:4752: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4755 "configure"
+#line 4757 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4760: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4762: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4786,17 +4788,17 @@ for ac_hdr in dlfcn.h image.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4790: checking for $ac_hdr" >&5
+echo "configure:4792: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4795 "configure"
+#line 4797 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4800: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4802: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4826,17 +4828,17 @@ for ac_hdr in arpa/inet.h net/if.h netinet/in.h sys/socket.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4830: checking for $ac_hdr" >&5
+echo "configure:4832: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4835 "configure"
+#line 4837 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4840: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4842: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4866,17 +4868,17 @@ for ac_hdr in machine/param.h sys/shm.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4870: checking for $ac_hdr" >&5
+echo "configure:4872: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4875 "configure"
+#line 4877 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4880: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4882: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4906,17 +4908,17 @@ for ac_hdr in linux/version.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4910: checking for $ac_hdr" >&5
+echo "configure:4912: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4915 "configure"
+#line 4917 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4920: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4922: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4944,12 +4946,12 @@ done
 
 
 echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:4948: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:4950: checking whether time.h and sys/time.h may both be included" >&5
 if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4953 "configure"
+#line 4955 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/time.h>
@@ -4958,7 +4960,7 @@ int main() {
 struct tm *tp;
 ; return 0; }
 EOF
-if { (eval echo configure:4962: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4964: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_header_time=yes
 else
@@ -4980,7 +4982,7 @@ fi
 
 
 cat > conftest.$ac_ext <<EOF
-#line 4984 "configure"
+#line 4986 "configure"
 #include "confdefs.h"
 #include <time.h>
 EOF
@@ -4998,7 +5000,7 @@ rm -f conftest*
 
 
 cat > conftest.$ac_ext <<EOF
-#line 5002 "configure"
+#line 5004 "configure"
 #include "confdefs.h"
 #include <sys/time.h>
 EOF
@@ -5019,17 +5021,17 @@ for ac_hdr in cthreads.h pthread.h kernel/scheduler.h kernel/OS.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5023: checking for $ac_hdr" >&5
+echo "configure:5025: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5028 "configure"
+#line 5030 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5033: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5035: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -5072,17 +5074,17 @@ then
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5076: checking for $ac_hdr" >&5
+echo "configure:5078: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5081 "configure"
+#line 5083 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5086: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5088: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -5104,7 +5106,7 @@ if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
 EOF
  
     cat > conftest.$ac_ext <<EOF
-#line 5108 "configure"
+#line 5110 "configure"
 #include "confdefs.h"
 #include <X11/extensions/dpms.h>
 EOF
@@ -5130,20 +5132,20 @@ done
 fi
 
 echo $ac_n "checking for ntohl in sys/param.h""... $ac_c" 1>&6
-echo "configure:5134: checking for ntohl in sys/param.h" >&5
+echo "configure:5136: checking for ntohl in sys/param.h" >&5
 if eval "test \"`echo '$''{'ac_cv_c_ntohl_sys_param_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   CFLAGS="${save_CFLAGS} -Wall -Werror"
      cat > conftest.$ac_ext <<EOF
-#line 5140 "configure"
+#line 5142 "configure"
 #include "confdefs.h"
 #include <sys/param.h>
 int main() {
 void foo() { int meuh; ntohl(meuh); }
 ; return 0; }
 EOF
-if { (eval echo configure:5147: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5149: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_ntohl_sys_param_h=yes
 else
@@ -5164,20 +5166,20 @@ EOF
 fi
 
 echo $ac_n "checking if \$CC accepts -finline-limit""... $ac_c" 1>&6
-echo "configure:5168: checking if \$CC accepts -finline-limit" >&5
+echo "configure:5170: checking if \$CC accepts -finline-limit" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline_limit'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   CFLAGS="${save_CFLAGS} -finline-limit-30000"
      cat > conftest.$ac_ext <<EOF
-#line 5174 "configure"
+#line 5176 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:5181: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5183: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline_limit=yes
 else
@@ -5195,20 +5197,20 @@ if test "x${ac_cv_c_inline_limit}" != "xno"; then
 fi
 
 echo $ac_n "checking if \$CC accepts -Wall -Winline""... $ac_c" 1>&6
-echo "configure:5199: checking if \$CC accepts -Wall -Winline" >&5
+echo "configure:5201: checking if \$CC accepts -Wall -Winline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_Wall_Winline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   CFLAGS="-Wall -Winline ${save_CFLAGS}"
      cat > conftest.$ac_ext <<EOF
-#line 5205 "configure"
+#line 5207 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:5212: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5214: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_Wall_Winline=yes
 else
@@ -5225,20 +5227,20 @@ if test "x${ac_cv_c_Wall_Winline}" != "xno"; then
     save_CFLAGS="-Wall -Winline ${save_CFLAGS}"; CFLAGS="${save_CFLAGS}"
 else
     echo $ac_n "checking if \$CC accepts -wall -winline""... $ac_c" 1>&6
-echo "configure:5229: checking if \$CC accepts -wall -winline" >&5
+echo "configure:5231: checking if \$CC accepts -wall -winline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_wall_winline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   CFLAGS="-wall -winline ${save_CFLAGS}"
          cat > conftest.$ac_ext <<EOF
-#line 5235 "configure"
+#line 5237 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:5242: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5244: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_wall_winline=yes
 else
@@ -5257,20 +5259,20 @@ echo "$ac_t""$ac_cv_c_wall_winline" 1>&6
 fi
 
 echo $ac_n "checking if \$CC accepts -pipe""... $ac_c" 1>&6
-echo "configure:5261: checking if \$CC accepts -pipe" >&5
+echo "configure:5263: checking if \$CC accepts -pipe" >&5
 if eval "test \"`echo '$''{'ac_cv_c_pipe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   CFLAGS="${save_CFLAGS} -pipe"
      cat > conftest.$ac_ext <<EOF
-#line 5267 "configure"
+#line 5269 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:5274: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5276: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_pipe=yes
 else
@@ -5288,20 +5290,20 @@ if test "x${ac_cv_c_pipe}" != "xno"; then
 fi
 
 echo $ac_n "checking if \$CC accepts -O3""... $ac_c" 1>&6
-echo "configure:5292: checking if \$CC accepts -O3" >&5
+echo "configure:5294: checking if \$CC accepts -O3" >&5
 if eval "test \"`echo '$''{'ac_cv_c_o3'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   CFLAGS="${save_CFLAGS} -O3"
      cat > conftest.$ac_ext <<EOF
-#line 5298 "configure"
+#line 5300 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:5305: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5307: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_o3=yes
 else
@@ -5318,20 +5320,20 @@ if test "x${ac_cv_c_o3}" != "xno"; then
     CFLAGS_OPTIM="${CFLAGS_OPTIM} -O3"
 else
     echo $ac_n "checking if \$CC accepts -O2""... $ac_c" 1>&6
-echo "configure:5322: checking if \$CC accepts -O2" >&5
+echo "configure:5324: checking if \$CC accepts -O2" >&5
 if eval "test \"`echo '$''{'ac_cv_c_o2'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   CFLAGS="${save_CFLAGS} -O2"
          cat > conftest.$ac_ext <<EOF
-#line 5328 "configure"
+#line 5330 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:5335: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5337: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_o2=yes
 else
@@ -5348,20 +5350,20 @@ echo "$ac_t""$ac_cv_c_o2" 1>&6
         CFLAGS_OPTIM="${CFLAGS_OPTIM} -O2"
     else
         echo $ac_n "checking if \$CC accepts -O""... $ac_c" 1>&6
-echo "configure:5352: checking if \$CC accepts -O" >&5
+echo "configure:5354: checking if \$CC accepts -O" >&5
 if eval "test \"`echo '$''{'ac_cv_c_o'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   CFLAGS="${save_CFLAGS} -O"
              cat > conftest.$ac_ext <<EOF
-#line 5358 "configure"
+#line 5360 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:5365: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5367: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_o=yes
 else
@@ -5381,20 +5383,20 @@ echo "$ac_t""$ac_cv_c_o" 1>&6
 fi
 
 echo $ac_n "checking if \$CC accepts -ffast-math""... $ac_c" 1>&6
-echo "configure:5385: checking if \$CC accepts -ffast-math" >&5
+echo "configure:5387: checking if \$CC accepts -ffast-math" >&5
 if eval "test \"`echo '$''{'ac_cv_c_fast_math'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   CFLAGS="${save_CFLAGS} -ffast-math"
      cat > conftest.$ac_ext <<EOF
-#line 5391 "configure"
+#line 5393 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:5398: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5400: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_fast_math=yes
 else
@@ -5412,20 +5414,20 @@ if test "x${ac_cv_c_fast_math}" != "xno"; then
 fi
 
 echo $ac_n "checking if \$CC accepts -funroll-loops""... $ac_c" 1>&6
-echo "configure:5416: checking if \$CC accepts -funroll-loops" >&5
+echo "configure:5418: checking if \$CC accepts -funroll-loops" >&5
 if eval "test \"`echo '$''{'ac_cv_c_unroll_loops'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   CFLAGS="${save_CFLAGS} -funroll-loops"
      cat > conftest.$ac_ext <<EOF
-#line 5422 "configure"
+#line 5424 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:5429: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5431: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_unroll_loops=yes
 else
@@ -5443,20 +5445,20 @@ if test "x${ac_cv_c_unroll_loops}" != "xno"; then
 fi
 
 echo $ac_n "checking if \$CC accepts -fomit-frame-pointer""... $ac_c" 1>&6
-echo "configure:5447: checking if \$CC accepts -fomit-frame-pointer" >&5
+echo "configure:5449: checking if \$CC accepts -fomit-frame-pointer" >&5
 if eval "test \"`echo '$''{'ac_cv_c_omit_frame_pointer'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   CFLAGS="${save_CFLAGS} -fomit-frame-pointer"
      cat > conftest.$ac_ext <<EOF
-#line 5453 "configure"
+#line 5455 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:5460: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5462: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_omit_frame_pointer=yes
 else
@@ -5476,20 +5478,20 @@ if test "x${ac_cv_c_omit_frame_pointer}" != "xno"; then
 fi
 
 echo $ac_n "checking if \$CC accepts -bundle -undefined error -lcc_dynamic""... $ac_c" 1>&6
-echo "configure:5480: checking if \$CC accepts -bundle -undefined error -lcc_dynamic" >&5
+echo "configure:5482: checking if \$CC accepts -bundle -undefined error -lcc_dynamic" >&5
 if eval "test \"`echo '$''{'ac_cv_ld_darwin'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   CFLAGS="${save_CFLAGS} -bundle -undefined error -lcc_dynamic"
      cat > conftest.$ac_ext <<EOF
-#line 5486 "configure"
+#line 5488 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:5493: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5495: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_ld_darwin=yes
 else
@@ -5507,20 +5509,20 @@ if test "x${ac_cv_ld_darwin}" != "xno"; then
 fi
 
 echo $ac_n "checking if \$CC accepts -shared""... $ac_c" 1>&6
-echo "configure:5511: checking if \$CC accepts -shared" >&5
+echo "configure:5513: checking if \$CC accepts -shared" >&5
 if eval "test \"`echo '$''{'ac_cv_ld_plugins'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   CFLAGS="${save_CFLAGS} -shared"
      cat > conftest.$ac_ext <<EOF
-#line 5517 "configure"
+#line 5519 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:5524: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5526: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_ld_plugins=yes
 else
@@ -5538,13 +5540,13 @@ if test "x${ac_cv_ld_plugins}" != "xno"; then
 fi
         
 echo $ac_n "checking for variadic cpp macros""... $ac_c" 1>&6
-echo "configure:5542: checking for variadic cpp macros" >&5
+echo "configure:5544: checking for variadic cpp macros" >&5
 if eval "test \"`echo '$''{'ac_cv_cpp_variadic_macros'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   CFLAGS="${save_CFLAGS}"
      cat > conftest.$ac_ext <<EOF
-#line 5548 "configure"
+#line 5550 "configure"
 #include "confdefs.h"
 #include <stdio.h>
           #define a(b,c...) printf(b,##c)
@@ -5552,7 +5554,7 @@ int main() {
 a("foo");a("%s","bar");a("%s%s","baz","quux");
 ; return 0; }
 EOF
-if { (eval echo configure:5556: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5558: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_cpp_variadic_macros=yes
 else
@@ -5573,7 +5575,7 @@ EOF
 fi
 
 echo $ac_n "checking __attribute__ ((aligned ())) support""... $ac_c" 1>&6
-echo "configure:5577: checking __attribute__ ((aligned ())) support" >&5
+echo "configure:5579: checking __attribute__ ((aligned ())) support" >&5
 if eval "test \"`echo '$''{'ac_cv_c_attribute_aligned'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5581,14 +5583,14 @@ else
         CFLAGS="${save_CFLAGS} -Werror"
     for ac_cv_c_attr_align_try in 2 4 8 16 32 64; do
         cat > conftest.$ac_ext <<EOF
-#line 5585 "configure"
+#line 5587 "configure"
 #include "confdefs.h"
 
 int main() {
 static char c __attribute__ ((aligned(${ac_cv_c_attr_align_try}))) = 0; return c;
 ; return 0; }
 EOF
-if { (eval echo configure:5592: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5594: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_attribute_aligned="${ac_cv_c_attr_align_try}"
 else
@@ -5622,9 +5624,10 @@ PLUGINS="${PLUGINS} misc/dummy/dummy misc/null"
 PLUGINS="${PLUGINS} control/rc/rc misc/logger/logger access/file misc/memcpy/memcpy"
 PLUGINS="${PLUGINS} demux/mpeg/es demux/mpeg/audio demux/mpeg/mpeg_system demux/mpeg/ps demux/mpeg/ts"
 PLUGINS="${PLUGINS} codec/mpeg_video/idct/idct codec/mpeg_video/idct/idctclassic codec/mpeg_video/motion/motion codec/mpeg_video/mpeg_video codec/spudec/spudec codec/spdif codec/mpeg_audio/mpeg_audio"
-#PLUGINS="${PLUGINS} codec/a52old/imdct/imdct codec/a52old/downmix/downmix codec/a52old/a52old codec/lpcm/lpcm"
+PLUGINS="${PLUGINS} codec/a52old/imdct/imdct codec/a52old/downmix/downmix codec/a52old/a52old"
+#PLUGINS="${PLUGINS} codec/lpcm/lpcm"
 PLUGINS="${PLUGINS} video_filter/deinterlace/deinterlace video_filter/invert video_filter/wall video_filter/transform video_filter/distort video_filter/clone video_filter/crop"
-PLUGINS="${PLUGINS} audio_filter/converter/float32tos16 audio_filter/converter/float32tos8 audio_filter/converter/float32tou16 audio_filter/converter/float32tou8 audio_filter/converter/a52tospdif"
+PLUGINS="${PLUGINS} audio_filter/converter/float32tos16 audio_filter/converter/float32tos8 audio_filter/converter/float32tou16 audio_filter/converter/float32tou8 audio_filter/converter/a52tospdif audio_filter/converter/fixed32tofloat32 audio_filter/converter/fixed32tos16 audio_filter/converter/s16tofloat32"
 PLUGINS="${PLUGINS} audio_filter/resampler/trivial"
 PLUGINS="${PLUGINS} audio_mixer/trivial audio_mixer/spdif"
 PLUGINS="${PLUGINS} audio_output/file"
@@ -5645,20 +5648,20 @@ then
 fi
 
 echo $ac_n "checking if \$CC groks MMX inline assembly""... $ac_c" 1>&6
-echo "configure:5649: checking if \$CC groks MMX inline assembly" >&5
+echo "configure:5652: checking if \$CC groks MMX inline assembly" >&5
 if eval "test \"`echo '$''{'ac_cv_mmx_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   CFLAGS="${save_CFLAGS}"
      cat > conftest.$ac_ext <<EOF
-#line 5655 "configure"
+#line 5658 "configure"
 #include "confdefs.h"
 
 int main() {
 void *p;asm volatile("packuswb %%mm1,%%mm2"::"r"(p));
 ; return 0; }
 EOF
-if { (eval echo configure:5662: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5665: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_mmx_inline=yes
 else
@@ -5676,20 +5679,20 @@ if test "x${ac_cv_mmx_inline}" != "xno"; then
 fi
 
 echo $ac_n "checking if \$CC groks MMX EXT inline assembly""... $ac_c" 1>&6
-echo "configure:5680: checking if \$CC groks MMX EXT inline assembly" >&5
+echo "configure:5683: checking if \$CC groks MMX EXT inline assembly" >&5
 if eval "test \"`echo '$''{'ac_cv_mmxext_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   CFLAGS="${save_CFLAGS}"
      cat > conftest.$ac_ext <<EOF
-#line 5686 "configure"
+#line 5689 "configure"
 #include "confdefs.h"
 
 int main() {
 void *p;asm volatile("maskmovq %%mm1,%%mm2"::"r"(p));
 ; return 0; }
 EOF
-if { (eval echo configure:5693: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5696: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_mmxext_inline=yes
 else
@@ -5707,20 +5710,20 @@ if test "x${ac_cv_mmxext_inline}" != "xno"; then
 fi
 
 echo $ac_n "checking if \$CC groks 3D Now! inline assembly""... $ac_c" 1>&6
-echo "configure:5711: checking if \$CC groks 3D Now! inline assembly" >&5
+echo "configure:5714: checking if \$CC groks 3D Now! inline assembly" >&5
 if eval "test \"`echo '$''{'ac_cv_3dnow_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   CFLAGS="${save_CFLAGS}"
      cat > conftest.$ac_ext <<EOF
-#line 5717 "configure"
+#line 5720 "configure"
 #include "confdefs.h"
 
 int main() {
 void *p;asm volatile("pfadd %%mm1,%%mm2"::"r"(p));
 ; return 0; }
 EOF
-if { (eval echo configure:5724: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5727: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_3dnow_inline=yes
 else
@@ -5742,20 +5745,20 @@ EOF
 fi
 
 echo $ac_n "checking if \$CC groks SSE inline assembly""... $ac_c" 1>&6
-echo "configure:5746: checking if \$CC groks SSE inline assembly" >&5
+echo "configure:5749: checking if \$CC groks SSE inline assembly" >&5
 if eval "test \"`echo '$''{'ac_cv_sse_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   CFLAGS="${save_CFLAGS}"
      cat > conftest.$ac_ext <<EOF
-#line 5752 "configure"
+#line 5755 "configure"
 #include "confdefs.h"
 
 int main() {
 void *p;asm volatile("xorps %%xmm1,%%xmm2"::"r"(p));
 ; return 0; }
 EOF
-if { (eval echo configure:5759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5762: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_sse_inline=yes
 else
@@ -5780,20 +5783,20 @@ fi
 # we should be able to remove this test with future versions of mingw32
 if test "x${SYS}" != "xmingw32"; then
 echo $ac_n "checking if \$CC groks AltiVec inline assembly""... $ac_c" 1>&6
-echo "configure:5784: checking if \$CC groks AltiVec inline assembly" >&5
+echo "configure:5787: checking if \$CC groks AltiVec inline assembly" >&5
 if eval "test \"`echo '$''{'ac_cv_altivec_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   CFLAGS="${save_CFLAGS}"
      cat > conftest.$ac_ext <<EOF
-#line 5790 "configure"
+#line 5793 "configure"
 #include "confdefs.h"
 
 int main() {
 asm volatile("vperm 0,1,2,3");
 ; return 0; }
 EOF
-if { (eval echo configure:5797: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5800: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_altivec_inline=yes
 else
@@ -5802,14 +5805,14 @@ else
   rm -rf conftest*
   CFLAGS="${save_CFLAGS} -Wa,-m7400"
           cat > conftest.$ac_ext <<EOF
-#line 5806 "configure"
+#line 5809 "configure"
 #include "confdefs.h"
 
 int main() {
 asm volatile("vperm 0,1,2,3");
 ; return 0; }
 EOF
-if { (eval echo configure:5813: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5816: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_altivec_inline="-Wa,-m7400"
 else
@@ -5840,21 +5843,21 @@ EOF
 fi
 
 echo $ac_n "checking if \$CC groks AltiVec C extensions""... $ac_c" 1>&6
-echo "configure:5844: checking if \$CC groks AltiVec C extensions" >&5
+echo "configure:5847: checking if \$CC groks AltiVec C extensions" >&5
 if eval "test \"`echo '$''{'ac_cv_c_altivec'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   CFLAGS="${save_CFLAGS} -faltivec"
      # Darwin test
      cat > conftest.$ac_ext <<EOF
-#line 5851 "configure"
+#line 5854 "configure"
 #include "confdefs.h"
 
 int main() {
 vec_mtvscr((vector unsigned int)(0));
 ; return 0; }
 EOF
-if { (eval echo configure:5858: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5861: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_altivec=-faltivec
 else
@@ -5865,14 +5868,14 @@ else
         # Linux/PPC test
         CFLAGS="${save_CFLAGS} ${idctaltivec_CFLAGS} -fvec"
         cat > conftest.$ac_ext <<EOF
-#line 5869 "configure"
+#line 5872 "configure"
 #include "confdefs.h"
 
 int main() {
 vec_mtvscr((vector unsigned int)(0));
 ; return 0; }
 EOF
-if { (eval echo configure:5876: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5879: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_altivec="-fvec"
 else
@@ -5902,20 +5905,20 @@ EOF
 fi
 
 echo $ac_n "checking if linker needs -framework vecLib""... $ac_c" 1>&6
-echo "configure:5906: checking if linker needs -framework vecLib" >&5
+echo "configure:5909: checking if linker needs -framework vecLib" >&5
 if eval "test \"`echo '$''{'ac_cv_ld_altivec'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   LDFLAGS="${vlc_LDFLAGS} -framework vecLib"
      cat > conftest.$ac_ext <<EOF
-#line 5912 "configure"
+#line 5915 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:5919: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5922: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_ld_altivec=yes
 else
@@ -6047,17 +6050,17 @@ fi
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:6051: checking for $ac_hdr" >&5
+echo "configure:6054: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6056 "configure"
+#line 6059 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6061: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6064: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -6088,7 +6091,7 @@ done
 
     else
       echo $ac_n "checking for libdvdcss.a in ${with_dvdcss_tree}""... $ac_c" 1>&6
-echo "configure:6092: checking for libdvdcss.a in ${with_dvdcss_tree}" >&5
+echo "configure:6095: checking for libdvdcss.a in ${with_dvdcss_tree}" >&5
       real_dvdcss_tree="`cd ${with_dvdcss_tree} 2>/dev/null && pwd`"
       if test "x${real_dvdcss_tree}" = "x"
       then
@@ -6114,7 +6117,7 @@ echo "configure:6092: checking for libdvdcss.a in ${with_dvdcss_tree}" >&5
   ;;
   *)
     echo $ac_n "checking for dvdcss headers in ${with_dvdcss}""... $ac_c" 1>&6
-echo "configure:6118: checking for dvdcss headers in ${with_dvdcss}" >&5
+echo "configure:6121: checking for dvdcss headers in ${with_dvdcss}" >&5
     if test -f ${with_dvdcss}/include/dvdcss/dvdcss.h
     then
             echo "$ac_t""yes" 1>&6
@@ -6156,17 +6159,17 @@ fi
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:6160: checking for $ac_hdr" >&5
+echo "configure:6163: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6165 "configure"
+#line 6168 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6170: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6173: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -6188,14 +6191,14 @@ if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
 EOF
  
      cat > conftest.$ac_ext <<EOF
-#line 6192 "configure"
+#line 6195 "configure"
 #include "confdefs.h"
 #include <dvdread/dvd_reader.h>
 int main() {
 int foo() { return DVD_VIDEO_LB_LEN; }
 ; return 0; }
 EOF
-if { (eval echo configure:6199: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6202: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   
           PLUGINS="${PLUGINS} access/dvdread/dvdread"
@@ -6260,17 +6263,17 @@ fi
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:6264: checking for $ac_hdr" >&5
+echo "configure:6267: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6269 "configure"
+#line 6272 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6274: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6277: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -6342,17 +6345,17 @@ fi
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:6346: checking for $ac_hdr" >&5
+echo "configure:6349: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6351 "configure"
+#line 6354 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6356: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6359: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -6381,7 +6384,7 @@ done
 
     else
       echo $ac_n "checking for libdvbpsi.a in ${with_dvbpsi_tree}""... $ac_c" 1>&6
-echo "configure:6385: checking for libdvbpsi.a in ${with_dvbpsi_tree}" >&5
+echo "configure:6388: checking for libdvbpsi.a in ${with_dvbpsi_tree}" >&5
       real_dvbpsi_tree="`cd ${with_dvbpsi_tree} 2>/dev/null && pwd`"
       if test "x${real_dvbpsi_tree}" = "x"
       then
@@ -6404,7 +6407,7 @@ echo "configure:6385: checking for libdvbpsi.a in ${with_dvbpsi_tree}" >&5
       ;;
   *)
     echo $ac_n "checking for dvbpsi headers in ${with_dvbpsi}""... $ac_c" 1>&6
-echo "configure:6408: checking for dvbpsi headers in ${with_dvbpsi}" >&5
+echo "configure:6411: checking for dvbpsi headers in ${with_dvbpsi}" >&5
     if test "x${with_dvbpsi}" = "x"
     then
       test_LDFLAGS=""
@@ -6416,17 +6419,17 @@ echo "configure:6408: checking for dvbpsi headers in ${with_dvbpsi}" >&5
     CPPFLAGS="${save_CPPFLAGS} ${test_CFLAGS}"
     ac_safe=`echo "dvbpsi/dr.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for dvbpsi/dr.h""... $ac_c" 1>&6
-echo "configure:6420: checking for dvbpsi/dr.h" >&5
+echo "configure:6423: checking for dvbpsi/dr.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6425 "configure"
+#line 6428 "configure"
 #include "confdefs.h"
 #include <dvbpsi/dr.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6430: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6433: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -6474,17 +6477,17 @@ then
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:6478: checking for $ac_hdr" >&5
+echo "configure:6481: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6483 "configure"
+#line 6486 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6488: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6491: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -6524,7 +6527,7 @@ fi
 if test "x${enable_vcd}" != "xno"
 then
   cat > conftest.$ac_ext <<EOF
-#line 6528 "configure"
+#line 6531 "configure"
 #include "confdefs.h"
 #include <linux/cdrom.h>
 EOF
@@ -6539,7 +6542,7 @@ rm -f conftest*
 
   
   cat > conftest.$ac_ext <<EOF
-#line 6543 "configure"
+#line 6546 "configure"
 #include "confdefs.h"
 #include <sys/cdio.h>
 EOF
@@ -6583,12 +6586,12 @@ if test "x${SYS}" != "xnto" && test "x${SYS}" != "xmingw32"
 then
   have_ipv6=0
   echo $ac_n "checking for inet_pton""... $ac_c" 1>&6
-echo "configure:6587: checking for inet_pton" >&5
+echo "configure:6590: checking for inet_pton" >&5
 if eval "test \"`echo '$''{'ac_cv_func_inet_pton'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6592 "configure"
+#line 6595 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char inet_pton(); below.  */
@@ -6611,7 +6614,7 @@ inet_pton();
 
 ; return 0; }
 EOF
-if { (eval echo configure:6615: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6618: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_inet_pton=yes"
 else
@@ -6630,7 +6633,7 @@ else
   echo "$ac_t""no" 1>&6
 
     echo $ac_n "checking for inet_pton in -lresolv""... $ac_c" 1>&6
-echo "configure:6634: checking for inet_pton in -lresolv" >&5
+echo "configure:6637: checking for inet_pton in -lresolv" >&5
 ac_lib_var=`echo resolv'_'inet_pton | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -6638,7 +6641,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lresolv  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 6642 "configure"
+#line 6645 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -6649,7 +6652,7 @@ int main() {
 inet_pton()
 ; return 0; }
 EOF
-if { (eval echo configure:6653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6656: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -6674,9 +6677,9 @@ fi
 fi
 
   echo $ac_n "checking for sockaddr_in6 in netinet/in.h""... $ac_c" 1>&6
-echo "configure:6678: checking for sockaddr_in6 in netinet/in.h" >&5
+echo "configure:6681: checking for sockaddr_in6 in netinet/in.h" >&5
   cat > conftest.$ac_ext <<EOF
-#line 6680 "configure"
+#line 6683 "configure"
 #include "confdefs.h"
 #include <netinet/in.h>
 EOF
@@ -6697,9 +6700,9 @@ fi
 if test "x${SYS}" = "xmingw32"
 then
   echo $ac_n "checking for getaddrinfo in ws2tcpip.h""... $ac_c" 1>&6
-echo "configure:6701: checking for getaddrinfo in ws2tcpip.h" >&5
+echo "configure:6704: checking for getaddrinfo in ws2tcpip.h" >&5
   cat > conftest.$ac_ext <<EOF
-#line 6703 "configure"
+#line 6706 "configure"
 #include "confdefs.h"
 #include <ws2tcpip.h>
 EOF
@@ -6781,7 +6784,7 @@ fi
       { echo "configure: error: ${with_mad_tree} directory doesn't exist" 1>&2; exit 1; }
     fi
         echo $ac_n "checking for mad.h in ${real_mad_tree}/libmad""... $ac_c" 1>&6
-echo "configure:6785: checking for mad.h in ${real_mad_tree}/libmad" >&5
+echo "configure:6788: checking for mad.h in ${real_mad_tree}/libmad" >&5
     if test -f ${real_mad_tree}/libmad/mad.h
     then
       echo "$ac_t""yes" 1>&6
@@ -6789,7 +6792,7 @@ echo "configure:6785: checking for mad.h in ${real_mad_tree}/libmad" >&5
       mad_LDFLAGS="${mad_LDFLAGS} -L${real_mad_tree}/libmad/.libs"
       LDFLAGS="${save_LDFLAGS} ${mad_LDFLAGS}"
       echo $ac_n "checking for mad_bit_init in -lmad""... $ac_c" 1>&6
-echo "configure:6793: checking for mad_bit_init in -lmad" >&5
+echo "configure:6796: checking for mad_bit_init in -lmad" >&5
 ac_lib_var=`echo mad'_'mad_bit_init | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -6797,7 +6800,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lmad  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 6801 "configure"
+#line 6804 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -6808,7 +6811,7 @@ int main() {
 mad_bit_init()
 ; return 0; }
 EOF
-if { (eval echo configure:6812: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6815: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -6845,17 +6848,17 @@ fi
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:6849: checking for $ac_hdr" >&5
+echo "configure:6852: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6854 "configure"
+#line 6857 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6859: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6862: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -6883,7 +6886,7 @@ fi
 done
 
     echo $ac_n "checking for mad_bit_init in -lmad""... $ac_c" 1>&6
-echo "configure:6887: checking for mad_bit_init in -lmad" >&5
+echo "configure:6890: checking for mad_bit_init in -lmad" >&5
 ac_lib_var=`echo mad'_'mad_bit_init | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -6891,7 +6894,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lmad  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 6895 "configure"
+#line 6898 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -6902,7 +6905,7 @@ int main() {
 mad_bit_init()
 ; return 0; }
 EOF
-if { (eval echo configure:6906: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6909: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -6934,17 +6937,17 @@ for ac_hdr in id3tag.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:6938: checking for $ac_hdr" >&5
+echo "configure:6941: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6943 "configure"
+#line 6946 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6948: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6951: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -7010,7 +7013,7 @@ fi
   if test "x${with_ffmpeg_tree}" != "x"
   then
     echo $ac_n "checking for libavcodec.a in ${with_ffmpeg_tree}""... $ac_c" 1>&6
-echo "configure:7014: checking for libavcodec.a in ${with_ffmpeg_tree}" >&5
+echo "configure:7017: checking for libavcodec.a in ${with_ffmpeg_tree}" >&5
     real_ffmpeg_tree="`cd ${with_ffmpeg_tree} 2>/dev/null && pwd`"
     if test "x${real_ffmpeg_tree}" = x
     then
@@ -7031,7 +7034,7 @@ echo "configure:7014: checking for libavcodec.a in ${with_ffmpeg_tree}" >&5
     CFLAGS="${save_CFLAGS} ${ffmpeg_CFLAGS}"
     LDFLAGS="${save_LDFLAGS} ${ffmpeg_LDFLAGS}"
     echo $ac_n "checking for avcodec_init in -lavcodec""... $ac_c" 1>&6
-echo "configure:7035: checking for avcodec_init in -lavcodec" >&5
+echo "configure:7038: checking for avcodec_init in -lavcodec" >&5
 ac_lib_var=`echo avcodec'_'avcodec_init | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -7039,7 +7042,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lavcodec  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 7043 "configure"
+#line 7046 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -7050,7 +7053,7 @@ int main() {
 avcodec_init()
 ; return 0; }
 EOF
-if { (eval echo configure:7054: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7057: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -7108,7 +7111,7 @@ fi
   if test "x${with_faad_tree}" != "x"
   then
     echo $ac_n "checking for libfaad.a in ${with_faad_tree}""... $ac_c" 1>&6
-echo "configure:7112: checking for libfaad.a in ${with_faad_tree}" >&5
+echo "configure:7115: checking for libfaad.a in ${with_faad_tree}" >&5
     real_faad_tree="`cd ${with_faad_tree} 2>/dev/null && pwd`"
     if test "x${real_faad_tree}" = x
     then
@@ -7132,17 +7135,17 @@ echo "configure:7112: checking for libfaad.a in ${with_faad_tree}" >&5
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:7136: checking for $ac_hdr" >&5
+echo "configure:7139: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7141 "configure"
+#line 7144 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7146: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7149: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -7170,7 +7173,7 @@ fi
 done
 
     echo $ac_n "checking for faacDecOpen in -lfaad""... $ac_c" 1>&6
-echo "configure:7174: checking for faacDecOpen in -lfaad" >&5
+echo "configure:7177: checking for faacDecOpen in -lfaad" >&5
 ac_lib_var=`echo faad'_'faacDecOpen | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -7178,7 +7181,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lfaad  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 7182 "configure"
+#line 7185 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -7189,7 +7192,7 @@ int main() {
 faacDecOpen()
 ; return 0; }
 EOF
-if { (eval echo configure:7193: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7196: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -7233,17 +7236,17 @@ then
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:7237: checking for $ac_hdr" >&5
+echo "configure:7240: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7242 "configure"
+#line 7245 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7247: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7250: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -7300,7 +7303,7 @@ fi
       { echo "configure: error: ${with_a52_tree} directory doesn't exist" 1>&2; exit 1; }
     fi
         echo $ac_n "checking for a52.h in ${real_a52_tree}/include""... $ac_c" 1>&6
-echo "configure:7304: checking for a52.h in ${real_a52_tree}/include" >&5
+echo "configure:7307: checking for a52.h in ${real_a52_tree}/include" >&5
     if test -f ${real_a52_tree}/include/a52.h
     then
       echo "$ac_t""yes" 1>&6
@@ -7308,7 +7311,7 @@ echo "configure:7304: checking for a52.h in ${real_a52_tree}/include" >&5
       a52_LDFLAGS="${a52_LDFLAGS} -L${real_a52_tree}/liba52/.libs"
       LDFLAGS="${save_LDFLAGS} ${a52_LDFLAGS}"
       echo $ac_n "checking for a52_free in -la52""... $ac_c" 1>&6
-echo "configure:7312: checking for a52_free in -la52" >&5
+echo "configure:7315: checking for a52_free in -la52" >&5
 ac_lib_var=`echo a52'_'a52_free | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -7316,7 +7319,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-la52 -lm $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 7320 "configure"
+#line 7323 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -7327,7 +7330,7 @@ int main() {
 a52_free()
 ; return 0; }
 EOF
-if { (eval echo configure:7331: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7334: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -7381,17 +7384,17 @@ fi
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:7385: checking for $ac_hdr" >&5
+echo "configure:7388: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7390 "configure"
+#line 7393 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7395: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7398: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -7413,7 +7416,7 @@ if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
 EOF
  
       echo $ac_n "checking for a52_free in -la52""... $ac_c" 1>&6
-echo "configure:7417: checking for a52_free in -la52" >&5
+echo "configure:7420: checking for a52_free in -la52" >&5
 ac_lib_var=`echo a52'_'a52_free | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -7421,7 +7424,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-la52 -lm $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 7425 "configure"
+#line 7428 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -7432,7 +7435,7 @@ int main() {
 a52_free()
 ; return 0; }
 EOF
-if { (eval echo configure:7436: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7439: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -7496,17 +7499,17 @@ then
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:7500: checking for $ac_hdr" >&5
+echo "configure:7503: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7505 "configure"
+#line 7508 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7510: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7513: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -7549,17 +7552,17 @@ then
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:7553: checking for $ac_hdr" >&5
+echo "configure:7556: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7558 "configure"
+#line 7561 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7563: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7566: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -7611,17 +7614,17 @@ if test "x${enable_x11}" != "xno" &&
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:7615: checking for $ac_hdr" >&5
+echo "configure:7618: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7620 "configure"
+#line 7623 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7625: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7628: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -7667,17 +7670,17 @@ if test "x${enable_xvideo}" != "xno" &&
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:7671: checking for $ac_hdr" >&5
+echo "configure:7674: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7676 "configure"
+#line 7679 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7681: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7684: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -7700,7 +7703,7 @@ EOF
  
     CFLAGS="${save_CFLAGS} -L${x_libraries} -lX11 -lXext"
     echo $ac_n "checking for XvPutImage in -lXv_pic""... $ac_c" 1>&6
-echo "configure:7704: checking for XvPutImage in -lXv_pic" >&5
+echo "configure:7707: checking for XvPutImage in -lXv_pic" >&5
 ac_lib_var=`echo Xv_pic'_'XvPutImage | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -7708,7 +7711,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lXv_pic  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 7712 "configure"
+#line 7715 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -7719,7 +7722,7 @@ int main() {
 XvPutImage()
 ; return 0; }
 EOF
-if { (eval echo configure:7723: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7726: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -7741,7 +7744,7 @@ if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for XvPutImage in -lXv""... $ac_c" 1>&6
-echo "configure:7745: checking for XvPutImage in -lXv" >&5
+echo "configure:7748: checking for XvPutImage in -lXv" >&5
 ac_lib_var=`echo Xv'_'XvPutImage | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -7749,7 +7752,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lXv  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 7753 "configure"
+#line 7756 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -7760,7 +7763,7 @@ int main() {
 XvPutImage()
 ; return 0; }
 EOF
-if { (eval echo configure:7764: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7767: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -7820,7 +7823,7 @@ fi
   # Extract the first word of "sdl12-config", so it can be a program name with args.
 set dummy sdl12-config; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7824: checking for $ac_word" >&5
+echo "configure:7827: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_SDL12_CONFIG'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7860,7 +7863,7 @@ fi
     # Extract the first word of "sdl11-config", so it can be a program name with args.
 set dummy sdl11-config; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7864: checking for $ac_word" >&5
+echo "configure:7867: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_SDL11_CONFIG'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7901,7 +7904,7 @@ fi
     # Extract the first word of "sdl-config", so it can be a program name with args.
 set dummy sdl-config; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7905: checking for $ac_word" >&5
+echo "configure:7908: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_SDL_CONFIG'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7946,17 +7949,17 @@ fi
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:7950: checking for $ac_hdr" >&5
+echo "configure:7953: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7955 "configure"
+#line 7958 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7960: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7963: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -8026,17 +8029,17 @@ fi
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:8030: checking for $ac_hdr" >&5
+echo "configure:8033: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 8035 "configure"
+#line 8038 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8040: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8043: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -8065,7 +8068,7 @@ done
 
     else
       echo $ac_n "checking for directX headers in ${with_directx}""... $ac_c" 1>&6
-echo "configure:8069: checking for directX headers in ${with_directx}" >&5
+echo "configure:8072: checking for directX headers in ${with_directx}" >&5
       if test -f ${with_directx}/ddraw.h
       then
         PLUGINS="${PLUGINS} video_output/directx/directx"
@@ -8092,17 +8095,17 @@ fi
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:8096: checking for $ac_hdr" >&5
+echo "configure:8099: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 8101 "configure"
+#line 8104 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8106: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8109: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -8142,6 +8145,18 @@ if test "${enable_mga+set}" = set; then
 fi
 
 
+# Check whether --enable-svgalib or --disable-svgalib was given.
+if test "${enable_svgalib+set}" = set; then
+  enableval="$enable_svgalib"
+  :
+fi
+
+if test "x${enable_svgalib}" = "xyes"
+then
+  PLUGINS="${PLUGINS} video_output/svgalib"
+  svgalib_LDFLAGS="${svgalib_LDFLAGS} -lvga -lvgagl"
+fi
+
 # Check whether --enable-ggi or --disable-ggi was given.
 if test "${enable_ggi+set}" = set; then
   enableval="$enable_ggi"
@@ -8197,17 +8212,17 @@ if test "x${enable_aa}" = "xyes"
 then
   ac_safe=`echo "aalib.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for aalib.h""... $ac_c" 1>&6
-echo "configure:8201: checking for aalib.h" >&5
+echo "configure:8216: checking for aalib.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 8206 "configure"
+#line 8221 "configure"
 #include "confdefs.h"
 #include <aalib.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8211: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8226: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -8258,17 +8273,17 @@ then
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:8262: checking for $ac_hdr" >&5
+echo "configure:8277: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 8267 "configure"
+#line 8282 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8272: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8287: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -8291,7 +8306,7 @@ EOF
  
     PLUGINS="${PLUGINS} audio_output/oss"
     echo $ac_n "checking for main in -lossaudio""... $ac_c" 1>&6
-echo "configure:8295: checking for main in -lossaudio" >&5
+echo "configure:8310: checking for main in -lossaudio" >&5
 ac_lib_var=`echo ossaudio'_'main | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -8299,14 +8314,14 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lossaudio  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 8303 "configure"
+#line 8318 "configure"
 #include "confdefs.h"
 
 int main() {
 main()
 ; return 0; }
 EOF
-if { (eval echo configure:8310: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8325: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -8342,7 +8357,7 @@ if test "${enable_esd+set}" = set; then
      # Extract the first word of "esd-config", so it can be a program name with args.
 set dummy esd-config; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8346: checking for $ac_word" >&5
+echo "configure:8361: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_ESD_CONFIG'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8393,7 +8408,7 @@ if test "${enable_arts+set}" = set; then
      # Extract the first word of "artsc-config", so it can be a program name with args.
 set dummy artsc-config; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8397: checking for $ac_word" >&5
+echo "configure:8412: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_ARTS_CONFIG'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8443,17 +8458,17 @@ if test "${enable_alsa+set}" = set; then
    then
      ac_safe=`echo "alsa/asoundlib.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for alsa/asoundlib.h""... $ac_c" 1>&6
-echo "configure:8447: checking for alsa/asoundlib.h" >&5
+echo "configure:8462: checking for alsa/asoundlib.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 8452 "configure"
+#line 8467 "configure"
 #include "confdefs.h"
 #include <alsa/asoundlib.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8457: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8472: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -8470,7 +8485,7 @@ fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for main in -lasound""... $ac_c" 1>&6
-echo "configure:8474: checking for main in -lasound" >&5
+echo "configure:8489: checking for main in -lasound" >&5
 ac_lib_var=`echo asound'_'main | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -8478,14 +8493,14 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lasound  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 8482 "configure"
+#line 8497 "configure"
 #include "confdefs.h"
 
 int main() {
 main()
 ; return 0; }
 EOF
-if { (eval echo configure:8489: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8504: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -8567,7 +8582,7 @@ fi
   # Extract the first word of "gtk12-config", so it can be a program name with args.
 set dummy gtk12-config; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8571: checking for $ac_word" >&5
+echo "configure:8586: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GTK12_CONFIG'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8606,7 +8621,7 @@ fi
     # Extract the first word of "gtk-config", so it can be a program name with args.
 set dummy gtk-config; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8610: checking for $ac_word" >&5
+echo "configure:8625: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8655,17 +8670,17 @@ fi
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:8659: checking for $ac_hdr" >&5
+echo "configure:8674: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 8664 "configure"
+#line 8679 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8669: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8684: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -8726,7 +8741,7 @@ fi
   # Extract the first word of "gtk12-config", so it can be a program name with args.
 set dummy gtk12-config; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8730: checking for $ac_word" >&5
+echo "configure:8745: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GTK12_CONFIG'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8765,7 +8780,7 @@ fi
     # Extract the first word of "gtk-config", so it can be a program name with args.
 set dummy gtk-config; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8769: checking for $ac_word" >&5
+echo "configure:8784: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8814,17 +8829,17 @@ fi
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:8818: checking for $ac_hdr" >&5
+echo "configure:8833: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 8823 "configure"
+#line 8838 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8828: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8843: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -8870,7 +8885,7 @@ if test "${enable_gnome+set}" = set; then
     # Extract the first word of "gnome-config", so it can be a program name with args.
 set dummy gnome-config; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8874: checking for $ac_word" >&5
+echo "configure:8889: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GNOME_CONFIG'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8914,17 +8929,17 @@ fi
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:8918: checking for $ac_hdr" >&5
+echo "configure:8933: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 8923 "configure"
+#line 8938 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8928: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8943: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -9030,17 +9045,17 @@ else
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9034: checking for $ac_hdr" >&5
+echo "configure:9049: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 9039 "configure"
+#line 9054 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9044: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9059: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -9083,17 +9098,17 @@ fi
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9087: checking for $ac_hdr" >&5
+echo "configure:9102: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 9092 "configure"
+#line 9107 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9097: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9112: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -9164,17 +9179,17 @@ if test "x${enable_xosd}" = "xyes"
 then
   ac_safe=`echo "xosd.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for xosd.h""... $ac_c" 1>&6
-echo "configure:9168: checking for xosd.h" >&5
+echo "configure:9183: checking for xosd.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 9173 "configure"
+#line 9188 "configure"
 #include "confdefs.h"
 #include <xosd.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9178: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9193: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -9197,14 +9212,14 @@ have_xosd="false"
 fi
 
   cat > conftest.$ac_ext <<EOF
-#line 9201 "configure"
+#line 9216 "configure"
 #include "confdefs.h"
 #include <xosd.h>
 int main() {
 void foo() { xosd_init("foo","bar",12,XOSD_top,2,12,42); }
 ; return 0; }
 EOF
-if { (eval echo configure:9208: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9223: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   :
 else
   echo "configure: failed program was:" >&5
@@ -9233,17 +9248,17 @@ if test "x${enable_lirc}" = "xyes"
 then
   ac_safe=`echo "lirc/lirc_client.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for lirc/lirc_client.h""... $ac_c" 1>&6
-echo "configure:9237: checking for lirc/lirc_client.h" >&5
+echo "configure:9252: checking for lirc/lirc_client.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 9242 "configure"
+#line 9257 "configure"
 #include "confdefs.h"
 #include <lirc/lirc_client.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9247: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9262: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -9260,7 +9275,7 @@ fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for lirc_init in -llirc_client""... $ac_c" 1>&6
-echo "configure:9264: checking for lirc_init in -llirc_client" >&5
+echo "configure:9279: checking for lirc_init in -llirc_client" >&5
 ac_lib_var=`echo lirc_client'_'lirc_init | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -9268,7 +9283,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-llirc_client  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 9272 "configure"
+#line 9287 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -9279,7 +9294,7 @@ int main() {
 lirc_init()
 ; return 0; }
 EOF
-if { (eval echo configure:9283: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9298: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -9334,7 +9349,7 @@ fi
       ;;
     *)
                   echo $ac_n "checking whether the byte order is big-endian""... $ac_c" 1>&6
-echo "configure:9338: checking whether the byte order is big-endian" >&5
+echo "configure:9353: checking whether the byte order is big-endian" >&5
 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9416,7 +9431,7 @@ if test "${enable_pth+set}" = set; then
   enableval="$enable_pth"
    if test "x${enable_pth}" = "xyes"; then
     echo $ac_n "checking for pth_init in -lpth""... $ac_c" 1>&6
-echo "configure:9420: checking for pth_init in -lpth" >&5
+echo "configure:9435: checking for pth_init in -lpth" >&5
 ac_lib_var=`echo pth'_'pth_init | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -9424,7 +9439,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lpth  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 9428 "configure"
+#line 9443 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -9435,7 +9450,7 @@ int main() {
 pth_init()
 ; return 0; }
 EOF
-if { (eval echo configure:9439: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9454: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -9463,7 +9478,7 @@ else
 fi
 
     cat > conftest.$ac_ext <<EOF
-#line 9467 "configure"
+#line 9482 "configure"
 #include "confdefs.h"
 #include <pth.h>
 EOF
@@ -9489,7 +9504,7 @@ if test "${enable_st+set}" = set; then
   enableval="$enable_st"
    if test "x${enable_st}" = "xyes"; then
     echo $ac_n "checking for st_init in -lst""... $ac_c" 1>&6
-echo "configure:9493: checking for st_init in -lst" >&5
+echo "configure:9508: checking for st_init in -lst" >&5
 ac_lib_var=`echo st'_'st_init | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -9497,7 +9512,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lst  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 9501 "configure"
+#line 9516 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -9508,7 +9523,7 @@ int main() {
 st_init()
 ; return 0; }
 EOF
-if { (eval echo configure:9512: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9527: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -9536,7 +9551,7 @@ else
 fi
 
     cat > conftest.$ac_ext <<EOF
-#line 9540 "configure"
+#line 9555 "configure"
 #include "confdefs.h"
 #include <st.h>
 EOF
@@ -9572,7 +9587,7 @@ then
   # Extract the first word of "mozilla-config", so it can be a program name with args.
 set dummy mozilla-config; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:9576: checking for $ac_word" >&5
+echo "configure:9591: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MOZILLA_CONFIG'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9610,7 +9625,7 @@ fi
     if test "x${SYS}" != "xmingw32"; then
       LDFLAGS="${save_LDFLAGS} -L${x_libraries}"
       echo $ac_n "checking for XtStrings in -lXt""... $ac_c" 1>&6
-echo "configure:9614: checking for XtStrings in -lXt" >&5
+echo "configure:9629: checking for XtStrings in -lXt" >&5
 ac_lib_var=`echo Xt'_'XtStrings | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -9618,7 +9633,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lXt  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 9622 "configure"
+#line 9637 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -9629,7 +9644,7 @@ int main() {
 XtStrings()
 ; return 0; }
 EOF
-if { (eval echo configure:9633: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9648: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -9831,6 +9846,8 @@ for i in `echo ${BUILTINS} | sed -e 's#[^ ]*/##g'` ; do libvlc_LDFLAGS="${libvlc
 
 
 
+
+
 
 
 
@@ -10075,6 +10092,7 @@ s%@motionaltivec_CFLAGS@%$motionaltivec_CFLAGS%g
 s%@qt_CFLAGS@%$qt_CFLAGS%g
 s%@qte_CFLAGS@%$qte_CFLAGS%g
 s%@sdl_CFLAGS@%$sdl_CFLAGS%g
+s%@svgalib_CFLAGS@%$svgalib_CFLAGS%g
 s%@x11_CFLAGS@%$x11_CFLAGS%g
 s%@xvideo_CFLAGS@%$xvideo_CFLAGS%g
 s%@vlc_LDFLAGS@%$vlc_LDFLAGS%g
@@ -10125,6 +10143,7 @@ s%@qt_LDFLAGS@%$qt_LDFLAGS%g
 s%@qte_LDFLAGS@%$qte_LDFLAGS%g
 s%@rc_LDFLAGS@%$rc_LDFLAGS%g
 s%@sdl_LDFLAGS@%$sdl_LDFLAGS%g
+s%@svgalib_LDFLAGS@%$svgalib_LDFLAGS%g
 s%@vcd_LDFLAGS@%$vcd_LDFLAGS%g
 s%@vorbis_LDFLAGS@%$vorbis_LDFLAGS%g
 s%@waveout_LDFLAGS@%$waveout_LDFLAGS%g
index 7ef0968d254b9aa2c0dbb045ed56c46e9aa49e95..aa92cf06727addb8a410bb8ff3d8466bf105c5f9 100644 (file)
@@ -444,9 +444,10 @@ PLUGINS="${PLUGINS} misc/dummy/dummy misc/null"
 PLUGINS="${PLUGINS} control/rc/rc misc/logger/logger access/file misc/memcpy/memcpy"
 PLUGINS="${PLUGINS} demux/mpeg/es demux/mpeg/audio demux/mpeg/mpeg_system demux/mpeg/ps demux/mpeg/ts"
 PLUGINS="${PLUGINS} codec/mpeg_video/idct/idct codec/mpeg_video/idct/idctclassic codec/mpeg_video/motion/motion codec/mpeg_video/mpeg_video codec/spudec/spudec codec/spdif codec/mpeg_audio/mpeg_audio"
-#PLUGINS="${PLUGINS} codec/a52old/imdct/imdct codec/a52old/downmix/downmix codec/a52old/a52old codec/lpcm/lpcm"
+PLUGINS="${PLUGINS} codec/a52old/imdct/imdct codec/a52old/downmix/downmix codec/a52old/a52old"
+#PLUGINS="${PLUGINS} codec/lpcm/lpcm"
 PLUGINS="${PLUGINS} video_filter/deinterlace/deinterlace video_filter/invert video_filter/wall video_filter/transform video_filter/distort video_filter/clone video_filter/crop"
-PLUGINS="${PLUGINS} audio_filter/converter/float32tos16 audio_filter/converter/float32tos8 audio_filter/converter/float32tou16 audio_filter/converter/float32tou8 audio_filter/converter/a52tospdif"
+PLUGINS="${PLUGINS} audio_filter/converter/float32tos16 audio_filter/converter/float32tos8 audio_filter/converter/float32tou16 audio_filter/converter/float32tou8 audio_filter/converter/a52tospdif audio_filter/converter/fixed32tofloat32 audio_filter/converter/fixed32tos16 audio_filter/converter/s16tofloat32"
 PLUGINS="${PLUGINS} audio_filter/resampler/trivial"
 PLUGINS="${PLUGINS} audio_mixer/trivial audio_mixer/spdif"
 PLUGINS="${PLUGINS} audio_output/file"
@@ -1427,6 +1428,17 @@ AC_ARG_ENABLE(mga,
       PLUGINS="${PLUGINS} video_output/mga/mga video_output/mga/xmga"
     fi ])
 
+dnl
+dnl  SVGAlib module
+dnl
+AC_ARG_ENABLE(svgalib,
+  [  --enable-svgalib        SVGAlib support (default disabled)])
+if test "x${enable_svgalib}" = "xyes"
+then
+  PLUGINS="${PLUGINS} video_output/svgalib"
+  svgalib_LDFLAGS="${svgalib_LDFLAGS} -lvga -lvgagl"
+fi
+
 dnl
 dnl  GGI module
 dnl
@@ -2090,6 +2102,7 @@ AC_SUBST(motionaltivec_CFLAGS)
 AC_SUBST(qt_CFLAGS)
 AC_SUBST(qte_CFLAGS)
 AC_SUBST(sdl_CFLAGS)
+AC_SUBST(svgalib_CFLAGS)
 AC_SUBST(x11_CFLAGS)
 AC_SUBST(xvideo_CFLAGS)
 
@@ -2142,6 +2155,7 @@ AC_SUBST(qt_LDFLAGS)
 AC_SUBST(qte_LDFLAGS)
 AC_SUBST(rc_LDFLAGS)
 AC_SUBST(sdl_LDFLAGS)
+AC_SUBST(svgalib_LDFLAGS)
 AC_SUBST(vcd_LDFLAGS)
 AC_SUBST(vorbis_LDFLAGS)
 AC_SUBST(waveout_LDFLAGS)
index a429bfe42529bd3aa035d094006679ec2ddcdf06..4e9abde65e6d3290e2d5d612b458b5de55c9c728 100644 (file)
@@ -5,3 +5,4 @@ float32tou8_SOURCES = float32tou8.c
 a52tospdif_SOURCES = a52tospdif.c
 fixed32tos16_SOURCES = fixed32tos16.c
 fixed32tofloat32_SOURCES = fixed32tofloat32.c
+s16tofloat32_SOURCES = s16tofloat32.c
diff --git a/modules/audio_filter/converter/s16tofloat32.c b/modules/audio_filter/converter/s16tofloat32.c
new file mode 100644 (file)
index 0000000..a10bb98
--- /dev/null
@@ -0,0 +1,110 @@
+/*****************************************************************************
+ * s16tofloat32.c : converter from signed 16 bits integer to float32
+ *****************************************************************************
+ * Copyright (C) 2002 VideoLAN
+ * $Id: s16tofloat32.c,v 1.1 2002/08/21 09:27:40 sam Exp $
+ *
+ * Authors: Samuel Hocevar <sam@zoy.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111, USA.
+ *****************************************************************************/
+
+/*****************************************************************************
+ * Preamble
+ *****************************************************************************/
+#include <errno.h>
+#include <stdlib.h>                                      /* malloc(), free() */
+#include <string.h>
+
+#include <vlc/vlc.h>
+#include "audio_output.h"
+#include "aout_internal.h"
+
+/*****************************************************************************
+ * Local prototypes
+ *****************************************************************************/
+static int  Create    ( vlc_object_t * );
+
+static void DoWork    ( aout_instance_t *, aout_filter_t *, aout_buffer_t *,
+                        aout_buffer_t * );
+
+/*****************************************************************************
+ * Module descriptor
+ *****************************************************************************/
+vlc_module_begin();
+    set_description( _("aout filter for s16->float32 conversion") );
+    set_capability( "audio filter", 1 );
+    set_callbacks( Create, NULL );
+vlc_module_end();
+
+/*****************************************************************************
+ * Create: allocate trivial mixer
+ *****************************************************************************
+ * This function allocates and initializes a Crop vout method.
+ *****************************************************************************/
+static int Create( vlc_object_t *p_this )
+{
+    aout_filter_t * p_filter = (aout_filter_t *)p_this;
+
+    if ( p_filter->input.i_format != AOUT_FMT_S16_NE
+          || p_filter->output.i_format != AOUT_FMT_FLOAT32 )
+    {
+        return -1;
+    }
+
+    if ( !AOUT_FMTS_SIMILAR( &p_filter->input, &p_filter->output ) )
+    {
+        return -1;
+    }
+
+    p_filter->pf_do_work = DoWork;
+    p_filter->b_in_place = VLC_TRUE;
+
+    return 0;
+}
+
+/*****************************************************************************
+ * DoWork: convert a buffer
+ *****************************************************************************/
+static void DoWork( aout_instance_t * p_aout, aout_filter_t * p_filter,
+                    aout_buffer_t * p_in_buf, aout_buffer_t * p_out_buf )
+{
+    int i = p_in_buf->i_nb_samples * p_filter->input.i_channels;
+
+    /* We start from the end because b_in_place is true */
+    s16 * p_in = (s16 *)p_in_buf->p_buffer + i - 1;
+    float * p_out = (float *)p_out_buf->p_buffer + i - 1;
+
+    while( i-- )
+    {
+#if 0
+        /* Slow version */
+        *p_out = (float)*p_in / 32768.0;
+#else
+        /* This is walken's trick based on IEEE float format. On my PIII
+         * this takes 16 seconds to perform one billion conversions, instead
+         * of 19 seconds for the above division. */
+        s32 i_out = *p_in + 0x43c00000;
+        float f_out = *(float *)&i_out;
+        *p_out = f_out - 384.0;
+#endif
+
+        p_in--; p_out--;
+    }
+
+    p_out_buf->i_nb_samples = p_in_buf->i_nb_samples;
+    p_out_buf->i_nb_bytes = p_in_buf->i_nb_bytes * 2;
+}
+
index ba0653f75253da05f82d0614b3880b469faa7391..623ed0609a6aa90506b8971baae03bd12db9ff50 100644 (file)
@@ -2,7 +2,7 @@
  * a52old.c: A52 decoder module main file
  *****************************************************************************
  * Copyright (C) 1999-2001 VideoLAN
- * $Id: a52old.c,v 1.2 2002/08/04 20:04:11 sam Exp $
+ * $Id: a52old.c,v 1.3 2002/08/21 09:27:40 sam Exp $
  *
  * Authors: Michel Lespinasse <walken@zoy.org>
  *
@@ -31,6 +31,8 @@
 #include <vlc/aout.h>
 #include <vlc/decoder.h>
 
+#include "aout_internal.h"
+
 #ifdef HAVE_UNISTD_H
 #   include <unistd.h>                                           /* getpid() */
 #endif
 #include "downmix.h"
 #include "adec.h"
 
-#define A52DEC_FRAME_SIZE (2*1536) 
+#define A52DEC_FRAME_SIZE 1536
 
 /*****************************************************************************
  * Local prototypes
  *****************************************************************************/
 static int  OpenDecoder       ( vlc_object_t * );
 static int  RunDecoder        ( decoder_fifo_t * );
-static int  InitThread        ( a52dec_t * p_adec );
-static void EndThread         ( a52dec_t * p_adec );
-static void BitstreamCallback ( bit_stream_t *p_bit_stream,
-                                vlc_bool_t b_new_pes );
+static int  InitThread        ( a52dec_t * );
+static void EndThread         ( a52dec_t * );
+static void BitstreamCallback ( bit_stream_t *, vlc_bool_t );
 
 /*****************************************************************************
  * Module descriptor
@@ -94,6 +95,10 @@ static int RunDecoder( decoder_fifo_t *p_fifo )
     void *       p_orig;                          /* pointer before memalign */
     vlc_bool_t   b_sync = 0;
 
+    mtime_t i_pts;
+    aout_buffer_t *p_aout_buffer;
+    audio_sample_format_t output_format;
+
     /* Allocate the memory needed to store the thread's structure */
     p_a52dec = (a52dec_t *)vlc_memalign( &p_orig, 16, sizeof(a52dec_t) );
     memset( p_a52dec, 0, sizeof( a52dec_t ) );
@@ -121,7 +126,6 @@ static int RunDecoder( decoder_fifo_t *p_fifo )
     /* FIXME : do we have enough room to store the decoded frames ?? */
     while ((!p_a52dec->p_fifo->b_die) && (!p_a52dec->p_fifo->b_error))
     {
-        s16 * buffer;
         sync_info_t sync_info;
 
         if( !b_sync )
@@ -154,54 +158,64 @@ static int RunDecoder( decoder_fifo_t *p_fifo )
             continue;
         }
 
-        if( ( p_a52dec->p_aout_fifo != NULL ) &&
-            ( p_a52dec->p_aout_fifo->i_rate != sync_info.sample_rate ) )
+        if( ( p_a52dec->p_aout_input == NULL )||
+            ( output_format.i_rate != sync_info.sample_rate ) )
         {
-            /* Make sure the output thread leaves the NextFrame() function */
-            vlc_mutex_lock (&(p_a52dec->p_aout_fifo->data_lock));
-            aout_DestroyFifo (p_a52dec->p_aout_fifo);
-            vlc_cond_signal (&(p_a52dec->p_aout_fifo->data_wait));
-            vlc_mutex_unlock (&(p_a52dec->p_aout_fifo->data_lock));
+            if( p_a52dec->p_aout_input )
+            {
+                /* Delete old output */
+                msg_Warn( p_a52dec->p_fifo, "opening a new aout" );
+                aout_InputDelete( p_a52dec->p_aout, p_a52dec->p_aout_input );
+            }
 
-            p_a52dec->p_aout_fifo = NULL;
+            /* Set output configuration */
+            output_format.i_format   = AOUT_FMT_S16_NE;
+            output_format.i_channels = 2; /* FIXME ! */
+            output_format.i_rate     = sync_info.sample_rate;
+            p_a52dec->p_aout_input = aout_InputNew( p_a52dec->p_fifo,
+                                                    &p_a52dec->p_aout,
+                                                    &output_format );
         }
 
-        /* Creating the audio output fifo if not created yet */
-        if (p_a52dec->p_aout_fifo == NULL ) {
-            p_a52dec->p_aout_fifo =
-                aout_CreateFifo( p_a52dec->p_fifo, AOUT_FIFO_PCM, 2,
-                         sync_info.sample_rate, A52DEC_FRAME_SIZE, NULL  );
-            if ( p_a52dec->p_aout_fifo == NULL )
-            {
-                p_a52dec->p_fifo->b_error = 1;
-                break;
-            }
+        if( p_a52dec->p_aout_input == NULL )
+        {
+            msg_Err( p_a52dec->p_fifo, "failed to create aout fifo" );
+            p_a52dec->p_fifo->b_error = 1;
+            continue;
         }
 
-        CurrentPTS( &p_a52dec->bit_stream,
-            &p_a52dec->p_aout_fifo->date[p_a52dec->p_aout_fifo->i_end_frame],
-            NULL );
-        if( !p_a52dec->p_aout_fifo->date[p_a52dec->p_aout_fifo->i_end_frame] )
+        p_aout_buffer = aout_BufferNew( p_a52dec->p_aout,
+                                        p_a52dec->p_aout_input,
+                                        A52DEC_FRAME_SIZE );
+        if( !p_aout_buffer )
         {
-            p_a52dec->p_aout_fifo->date[
-                p_a52dec->p_aout_fifo->i_end_frame] =
-                LAST_MDATE;
+            msg_Err( p_a52dec->p_fifo, "cannot get aout buffer" );
+            p_a52dec->p_fifo->b_error = 1;
+            continue;
         }
-    
-        buffer = ((s16 *)p_a52dec->p_aout_fifo->buffer) + 
-            (p_a52dec->p_aout_fifo->i_end_frame * A52DEC_FRAME_SIZE);
 
-        if (decode_frame (p_a52dec, buffer))
+        CurrentPTS( &p_a52dec->bit_stream, &i_pts, NULL );
+        if( i_pts > 0 )
+        {
+            p_a52dec->i_pts = i_pts;
+        }
+        p_aout_buffer->start_date = p_a52dec->i_pts;
+        p_a52dec->i_pts += (mtime_t)1000000 * (mtime_t)A52DEC_FRAME_SIZE
+                                            / (mtime_t)output_format.i_rate;
+        p_aout_buffer->end_date = p_a52dec->i_pts;
+
+        if (decode_frame (p_a52dec, (s16*)p_aout_buffer->p_buffer))
         {
             b_sync = 0;
+            aout_BufferDelete( p_a52dec->p_aout, p_a52dec->p_aout_input,
+                                                 p_aout_buffer );
             continue;
         }
-        
-        vlc_mutex_lock (&p_a52dec->p_aout_fifo->data_lock);
-        p_a52dec->p_aout_fifo->i_end_frame = 
-            (p_a52dec->p_aout_fifo->i_end_frame + 1) & AOUT_FIFO_SIZE;
-        vlc_cond_signal (&p_a52dec->p_aout_fifo->data_wait);
-        vlc_mutex_unlock (&p_a52dec->p_aout_fifo->data_lock);
+        else
+        {
+            aout_BufferPlay( p_a52dec->p_aout, p_a52dec->p_aout_input,
+                                               p_aout_buffer );
+        }
 
         RealignBits(&p_a52dec->bit_stream);
     }
@@ -302,7 +316,9 @@ static int InitThread( a52dec_t * p_a52dec )
     /*
      * Initialize the output properties
      */
-    p_a52dec->p_aout_fifo = NULL;
+    p_a52dec->p_aout = NULL;
+    p_a52dec->p_aout_input = NULL;
+    p_a52dec->i_pts = 0;
 
     /*
      * Bit stream
@@ -319,14 +335,9 @@ static int InitThread( a52dec_t * p_a52dec )
 static void EndThread (a52dec_t * p_a52dec)
 {
     /* If the audio output fifo was created, we destroy it */
-    if (p_a52dec->p_aout_fifo != NULL)
+    if( p_a52dec->p_aout_input )
     {
-        aout_DestroyFifo (p_a52dec->p_aout_fifo);
-
-        /* Make sure the output thread leaves the NextFrame() function */
-        vlc_mutex_lock (&(p_a52dec->p_aout_fifo->data_lock));
-        vlc_cond_signal (&(p_a52dec->p_aout_fifo->data_wait));
-        vlc_mutex_unlock (&(p_a52dec->p_aout_fifo->data_lock));
+        aout_InputDelete( p_a52dec->p_aout, p_a52dec->p_aout_input );
     }
 
     /* Free allocated structures */
index 376fb86b0361a6931fc2acb03c267716e673d0cd..89920fa21c2c534aa03fa636386f836800b32605 100644 (file)
@@ -2,7 +2,7 @@
  * adec.h : A52 decoder interface
  *****************************************************************************
  * Copyright (C) 1999, 2000 VideoLAN
- * $Id: adec.h,v 1.2 2002/08/08 00:35:11 sam Exp $
+ * $Id: adec.h,v 1.3 2002/08/21 09:27:40 sam Exp $
  *
  * Authors: Michel Kaempf <maxx@via.ecp.fr>
  *          Renaud Dartus <reno@videolan.org>
@@ -399,7 +399,9 @@ struct a52dec_s
     /*
      * Output properties
      */
-    aout_fifo_t *       p_aout_fifo; /* stores the decompressed audio frames */
+    aout_instance_t *     p_aout;
+    aout_input_t *        p_aout_input;
+    mtime_t               i_pts;
 
     float *             samples;
     void *              samples_orig;             /* pointer before memalign */
index 56b5ffadbfde43c40ef332b88e9f0e1065ac71d7..1e54becacffa560a0781cb459254a7368c124b47 100644 (file)
@@ -2,7 +2,7 @@
  * downmix.c : A52 downmix module
  *****************************************************************************
  * Copyright (C) 1999-2001 VideoLAN
- * $Id: downmix.c,v 1.1 2002/08/04 17:23:42 sam Exp $
+ * $Id: downmix.c,v 1.2 2002/08/21 09:27:40 sam Exp $
  *
  * Authors: Renaud Dartus <reno@via.ecp.fr>
  *
@@ -62,11 +62,13 @@ vlc_module_begin();
     set_description( _("SSE A52 downmix module") );
     set_capability( "downmix", 200 );
     add_shortcut( "sse" );
+    add_requirement( SSE );
 #elif defined( MODULE_NAME_IS_downmix3dn )
     set_description( _("3D Now! A52 downmix module") );
     set_capability( "downmix", 200 );
     add_shortcut( "3dn" );
     add_shortcut( "3dnow" );
+    add_requirement( 3DNOW );
 #endif
     set_callbacks( Open, NULL );
 vlc_module_end();
index ea1653fe66f6d6de1bb20dac07211ab0125e8c76..b279bc6452b3727f0902284dc1170bf0700191bd 100644 (file)
@@ -2,7 +2,7 @@
  * imdct.c : IMDCT module
  *****************************************************************************
  * Copyright (C) 1999, 2000 VideoLAN
- * $Id: imdct.c,v 1.1 2002/08/04 17:23:42 sam Exp $
+ * $Id: imdct.c,v 1.2 2002/08/21 09:27:40 sam Exp $
  *
  * Authors: GaĆ«l Hendryckx <jimmy@via.ecp.fr>
  *
@@ -60,11 +60,13 @@ vlc_module_begin();
     set_description( _("SSE A52 IMDCT module") );
     set_capability( "imdct", 200 );
     add_shortcut( "sse" );
+    add_requirement( SSE );
 #elif defined( MODULE_NAME_IS_imdct3dn )
     set_description( _("3D Now! A52 IMDCT module") );
     set_capability( "imdct", 200 );
     add_shortcut( "3dn" );
     add_shortcut( "3dnow" );
+    add_requirement( 3DNOW );
 #endif
     set_callbacks( Open, NULL );
 vlc_module_end();