+++ /dev/null
-/**
- * amiga custom chip registers
- *
- * transcribed from adcd 2.1 amigaguide. likely omits aa chipset registers, and gayle.
- *
- * just nine <nine@aphlor.org>
- */
-
-#ifndef _AMIGA_REGISTERS_H
-#define _AMIGA_REGISTERS_H
-
-/**
- * three discernable banks which cover all amiga systems.
- *
- * bfd000-bfdf00 for the even cia
- * bfe001-bfef01 for the odd cia
- * dff000-dfffff for custom chip registers
- *
- * we will concern ourselves with the custom chip registers here; the cia is for additional i/o ops
- */
-
-#define CREG_BASE 0xdff000
-#define CREG_END 0xdfffff
-
-#define BLTDDAT CREG_BASE + 0x000 // agnus, blitter destination early read address (dummy)
-#define DMACONR CREG_BASE + 0x002 // agnus, paula dma control + blitter status read
-#define VPOSR CREG_BASE + 0x004 // ecs agnus, read vertical msb + frame flop
-#define VHPOSR CREG_BASE + 0x006 // agnus, vertical + horizonal position of beam
-#define DSKDATR CREG_BASE + 0x008 // paula, disk data early read address (dummy)
-#define JOY0DAT CREG_BASE + 0x00a // denise, input port 0 data
-#define JOY1DAT CREG_BASE + 0x00c // denise, input port 1 data
-// clxdat
-// adkconr
-// pot0dat
-// pot1dat
-// potgor
-#define SERDATR CREG_BASE + 0x018 // paula, serial port data and status, read
-// dskbytr
-// internar
-// intreqr
-// dskpth
-// dskptl
-// dsklen
-// refptr
-// vposw
-// vhposw
-// copcon
-#define SERDAT CREG_BASE + 0x030 // paula, serial port data and stop bits, write
-#define SERPER CREG_BASE + 0x032 // paula, serial port speed and control
-// @todo: the rest?!
-
-#endif