-- where all the low-level details (such as texture formats) are handled by the
-- C++ side and you generally just build chains.
-local transition_start = -2.0
-local transition_end = -1.0
-local transition_type = 0
-local transition_src_signal = 0
-local transition_dst_signal = 0
-
-local neutral_colors = {
- {0.5, 0.5, 0.5}, -- Input 0.
- {0.5, 0.5, 0.5} -- Input 1.
+local state = {
+ transition_start = -2.0,
+ transition_end = -1.0,
+ transition_type = 0,
+ transition_src_signal = 0,
+ transition_dst_signal = 0,
+
+ neutral_colors = {
+ {0.5, 0.5, 0.5}, -- Input 0.
+ {0.5, 0.5, 0.5} -- Input 1.
+ },
+
+ live_signal_num = 0,
+ preview_signal_num = 1
}
-local live_signal_num = 0
-local preview_signal_num = 1
-
-- Valid values for live_signal_num and preview_signal_num.
local INPUT0_SIGNAL_NUM = 0
local INPUT1_SIGNAL_NUM = 1
input:connect_signal(0) -- First input card. Can be changed whenever you want.
local resample_effect, resize_effect
- if scale then
+ if input_scale then
if hq then
resample_effect = chain:add_effect(ResampleEffect.new())
else
-- and get_channel_resolution_raw() is that this one also can say that
-- there's no signal.
function get_channel_resolution(signal_num)
- res = last_resolution[signal_num]
+ local res = last_resolution[signal_num]
if (not res) or not res.is_connected then
return "disconnected"
end
-- "transparent" is allowed.
-- Will never be called for live (0) or preview (1).
function channel_color(channel)
- if transition_type ~= NO_TRANSITION then
- if channel_involved_in(channel, transition_src_signal) or
- channel_involved_in(channel, transition_dst_signal) then
+ if state.transition_type ~= NO_TRANSITION then
+ if channel_involved_in(channel, state.transition_src_signal) or
+ channel_involved_in(channel, state.transition_dst_signal) then
return "#f00"
end
else
- if channel_involved_in(channel, live_signal_num) then
+ if channel_involved_in(channel, state.live_signal_num) then
return "#f00"
end
end
- if channel_involved_in(channel, preview_signal_num) then
+ if channel_involved_in(channel, state.preview_signal_num) then
return "#0f0"
end
return "transparent"
-- The color is in linear light (not sRGB gamma).
function set_wb(channel, red, green, blue)
if is_plain_signal(channel - 2) then
- neutral_colors[channel - 2 + 1] = { red, green, blue }
+ state.neutral_colors[channel - 2 + 1] = { red, green, blue }
end
end
function finish_transitions(t)
- if transition_type ~= NO_TRANSITION and t >= transition_end then
- live_signal_num = transition_dst_signal
- transition_type = NO_TRANSITION
+ if state.transition_type ~= NO_TRANSITION and t >= state.transition_end then
+ state.live_signal_num = state.transition_dst_signal
+ state.transition_type = NO_TRANSITION
end
end
function in_transition(t)
- return t >= transition_start and t <= transition_end
+ return t >= state.transition_start and t <= state.transition_end
end
-- API ENTRY POINT
finish_transitions(t)
- if live_signal_num == preview_signal_num then
+ if state.live_signal_num == state.preview_signal_num then
-- No transitions possible.
return {}
end
- if (is_plain_signal(live_signal_num) or live_signal_num == STATIC_SIGNAL_NUM) and
- (is_plain_signal(preview_signal_num) or preview_signal_num == STATIC_SIGNAL_NUM) then
+ if (is_plain_signal(state.live_signal_num) or state.live_signal_num == STATIC_SIGNAL_NUM) and
+ (is_plain_signal(state.preview_signal_num) or state.preview_signal_num == STATIC_SIGNAL_NUM) then
return {"Cut", "", "Fade"}
end
-- Various zooms.
- if live_signal_num == SBS_SIGNAL_NUM and is_plain_signal(preview_signal_num) then
+ if state.live_signal_num == SBS_SIGNAL_NUM and is_plain_signal(state.preview_signal_num) then
return {"Cut", "Zoom in"}
- elseif is_plain_signal(live_signal_num) and preview_signal_num == SBS_SIGNAL_NUM then
+ elseif is_plain_signal(state.live_signal_num) and state.preview_signal_num == SBS_SIGNAL_NUM then
return {"Cut", "Zoom out"}
end
end
function swap_preview_live()
- local temp = live_signal_num
- live_signal_num = preview_signal_num
- preview_signal_num = temp
+ local temp = state.live_signal_num
+ state.live_signal_num = state.preview_signal_num
+ state.preview_signal_num = temp
end
function start_transition(type_, t, duration)
- transition_start = t
- transition_end = t + duration
- transition_type = type_
- transition_src_signal = live_signal_num
- transition_dst_signal = preview_signal_num
+ state.transition_start = t
+ state.transition_end = t + duration
+ state.transition_type = type_
+ state.transition_src_signal = state.live_signal_num
+ state.transition_dst_signal = state.preview_signal_num
swap_preview_live()
end
-- Cut.
if in_transition(t) then
-- Ongoing transition; finish it immediately before the cut.
- finish_transitions(transition_end)
+ finish_transitions(state.transition_end)
end
swap_preview_live()
-- Zoom.
finish_transitions(t)
- if live_signal_num == preview_signal_num then
+ if state.live_signal_num == state.preview_signal_num then
-- Nothing to do.
return
end
- if is_plain_signal(live_signal_num) and is_plain_signal(preview_signal_num) then
+ if is_plain_signal(state.live_signal_num) and is_plain_signal(state.preview_signal_num) then
-- We can't zoom between these. Just make a cut.
- io.write("Cutting from " .. live_signal_num .. " to " .. live_signal_num .. "\n")
+ io.write("Cutting from " .. state.live_signal_num .. " to " .. state.live_signal_num .. "\n")
swap_preview_live()
return
end
- if (live_signal_num == SBS_SIGNAL_NUM and is_plain_signal(preview_signal_num)) or
- (preview_signal_num == SBS_SIGNAL_NUM and is_plain_signal(live_signal_num)) then
+ if (state.live_signal_num == SBS_SIGNAL_NUM and is_plain_signal(state.preview_signal_num)) or
+ (state.preview_signal_num == SBS_SIGNAL_NUM and is_plain_signal(state.live_signal_num)) then
start_transition(ZOOM_TRANSITION, t, 1.0)
end
elseif num == 2 then
finish_transitions(t)
-- Fade.
- if (live_signal_num ~= preview_signal_num) and
- (is_plain_signal(live_signal_num) or
- live_signal_num == STATIC_SIGNAL_NUM) and
- (is_plain_signal(preview_signal_num) or
- preview_signal_num == STATIC_SIGNAL_NUM) then
+ if (state.live_signal_num ~= state.preview_signal_num) and
+ (is_plain_signal(state.live_signal_num) or
+ state.live_signal_num == STATIC_SIGNAL_NUM) and
+ (is_plain_signal(state.preview_signal_num) or
+ state.preview_signal_num == STATIC_SIGNAL_NUM) then
start_transition(FADE_TRANSITION, t, 1.0)
else
-- Fades involving SBS are ignored (we have no chain for it).
-- API ENTRY POINT
function channel_clicked(num)
- preview_signal_num = num
+ state.preview_signal_num = num
end
-function get_fade_chain(signals, t, width, height, input_resolution)
- local input0_type = get_input_type(signals, transition_src_signal)
- local input0_scale = needs_scale(signals, transition_src_signal, width, height)
- local input1_type = get_input_type(signals, transition_dst_signal)
- local input1_scale = needs_scale(signals, transition_dst_signal, width, height)
+function get_fade_chain(state, signals, t, width, height, input_resolution)
+ local input0_type = get_input_type(signals, state.transition_src_signal)
+ local input0_scale = needs_scale(signals, state.transition_src_signal, width, height)
+ local input1_type = get_input_type(signals, state.transition_dst_signal)
+ local input1_scale = needs_scale(signals, state.transition_dst_signal, width, height)
local chain = fade_chains[input0_type][input0_scale][input1_type][input1_scale][true]
- prepare = function()
+ local prepare = function()
if input0_type == "live" or input0_type == "livedeint" then
- chain.input0.input:connect_signal(transition_src_signal)
- set_neutral_color_from_signal(chain.input0.wb_effect, transition_src_signal)
+ chain.input0.input:connect_signal(state.transition_src_signal)
+ set_neutral_color_from_signal(state, chain.input0.wb_effect, state.transition_src_signal)
end
set_scale_parameters_if_needed(chain.input0, width, height)
if input1_type == "live" or input1_type == "livedeint" then
- chain.input1.input:connect_signal(transition_dst_signal)
- set_neutral_color_from_signal(chain.input1.wb_effect, transition_dst_signal)
+ chain.input1.input:connect_signal(state.transition_dst_signal)
+ set_neutral_color_from_signal(state, chain.input1.wb_effect, state.transition_dst_signal)
end
set_scale_parameters_if_needed(chain.input1, width, height)
- local tt = calc_fade_progress(t, transition_start, transition_end)
+ local tt = calc_fade_progress(t, state.transition_start, state.transition_end)
chain.mix_effect:set_float("strength_first", 1.0 - tt)
chain.mix_effect:set_float("strength_second", tt)
end
last_resolution = input_resolution
+ -- Make a (semi-shallow) copy of the current state, so that the returned prepare function
+ -- is unaffected by state changes made by the UI before it is rendered.
+ local state_copy = {}
+ for key, value in pairs(state) do
+ state_copy[key] = value
+ end
+ state_copy.neutral_colors = { unpack(state.neutral_colors) }
+
if num == 0 then -- Live.
finish_transitions(t)
- if transition_type == ZOOM_TRANSITION then
+ if state.transition_type == ZOOM_TRANSITION then
-- Transition in or out of SBS.
local chain = get_sbs_chain(signals, t, width, height, input_resolution)
- prepare = function()
- prepare_sbs_chain(chain, calc_zoom_progress(t), transition_type, transition_src_signal, transition_dst_signal, width, height, input_resolution)
+ local prepare = function()
+ prepare_sbs_chain(state_copy, chain, calc_zoom_progress(state_copy, t), state_copy.transition_type, state_copy.transition_src_signal, state_copy.transition_dst_signal, width, height, input_resolution)
end
return chain.chain, prepare
- elseif transition_type == NO_TRANSITION and live_signal_num == SBS_SIGNAL_NUM then
+ elseif state.transition_type == NO_TRANSITION and state.live_signal_num == SBS_SIGNAL_NUM then
-- Static SBS view.
local chain = get_sbs_chain(signals, t, width, height, input_resolution)
- prepare = function()
- prepare_sbs_chain(chain, 0.0, NO_TRANSITION, 0, SBS_SIGNAL_NUM, width, height, input_resolution)
+ local prepare = function()
+ prepare_sbs_chain(state_copy, chain, 0.0, NO_TRANSITION, 0, SBS_SIGNAL_NUM, width, height, input_resolution)
end
return chain.chain, prepare
- elseif transition_type == FADE_TRANSITION then
- return get_fade_chain(signals, t, width, height, input_resolution)
- elseif is_plain_signal(live_signal_num) then
- local input_type = get_input_type(signals, live_signal_num)
- local input_scale = needs_scale(signals, live_signal_num, width, height)
+ elseif state.transition_type == FADE_TRANSITION then
+ return get_fade_chain(state_copy, signals, t, width, height, input_resolution)
+ elseif is_plain_signal(state.live_signal_num) then
+ local input_type = get_input_type(signals, state.live_signal_num)
+ local input_scale = needs_scale(signals, state.live_signal_num, width, height)
local chain = simple_chains[input_type][input_scale][true]
- prepare = function()
- chain.input:connect_signal(live_signal_num)
+ local prepare = function()
+ chain.input:connect_signal(state_copy.live_signal_num)
set_scale_parameters_if_needed(chain, width, height)
- set_neutral_color_from_signal(chain.wb_effect, live_signal_num)
+ set_neutral_color_from_signal(state_copy, chain.wb_effect, state_copy.live_signal_num)
end
return chain.chain, prepare
- elseif live_signal_num == STATIC_SIGNAL_NUM then -- Static picture.
- prepare = function()
+ elseif state.live_signal_num == STATIC_SIGNAL_NUM then -- Static picture.
+ local prepare = function()
end
return static_chain_hq, prepare
else
end
end
if num == 1 then -- Preview.
- num = preview_signal_num + 2
+ num = state.preview_signal_num + 2
end
-- Individual preview inputs.
local input_type = get_input_type(signals, signal_num)
local input_scale = needs_scale(signals, signal_num, width, height)
local chain = simple_chains[input_type][input_scale][false]
- prepare = function()
+ local prepare = function()
chain.input:connect_signal(signal_num)
set_scale_parameters_if_needed(chain, width, height)
- set_neutral_color(chain.wb_effect, neutral_colors[signal_num + 1])
+ set_neutral_color(chain.wb_effect, state_copy.neutral_colors[signal_num + 1])
end
return chain.chain, prepare
end
local input0_type = get_input_type(signals, INPUT0_SIGNAL_NUM)
local input1_type = get_input_type(signals, INPUT1_SIGNAL_NUM)
local chain = sbs_chains[input0_type][input1_type][false]
- prepare = function()
- prepare_sbs_chain(chain, 0.0, NO_TRANSITION, 0, SBS_SIGNAL_NUM, width, height, input_resolution)
+ local prepare = function()
+ prepare_sbs_chain(state_copy, chain, 0.0, NO_TRANSITION, 0, SBS_SIGNAL_NUM, width, height, input_resolution)
end
return chain.chain, prepare
end
if num == STATIC_SIGNAL_NUM + 2 then
- prepare = function()
+ local prepare = function()
end
return static_chain_lq, prepare
end
}
end
-function prepare_sbs_chain(chain, t, transition_type, src_signal, dst_signal, screen_width, screen_height, input_resolution)
+function prepare_sbs_chain(state, chain, t, transition_type, src_signal, dst_signal, screen_width, screen_height, input_resolution)
chain.input0.input:connect_signal(0)
chain.input1.input:connect_signal(1)
- set_neutral_color(chain.input0.wb_effect, neutral_colors[1])
- set_neutral_color(chain.input1.wb_effect, neutral_colors[2])
+ set_neutral_color(chain.input0.wb_effect, state.neutral_colors[1])
+ set_neutral_color(chain.input1.wb_effect, state.neutral_colors[2])
-- First input is positioned (16,48) from top-left.
-- Second input is positioned (16,48) from the bottom-right.
effect:set_vec3("neutral_color", color[1], color[2], color[3])
end
-function set_neutral_color_from_signal(effect, signal)
+function set_neutral_color_from_signal(state, effect, signal)
if is_plain_signal(signal) then
- set_neutral_color(effect, neutral_colors[signal - INPUT0_SIGNAL_NUM + 1])
+ set_neutral_color(effect, state.neutral_colors[signal - INPUT0_SIGNAL_NUM + 1])
end
end
-function calc_zoom_progress(t)
- if t < transition_start then
+function calc_zoom_progress(state, t)
+ if t < state.transition_start then
return 0.0
- elseif t > transition_end then
+ elseif t > state.transition_end then
return 1.0
else
- local tt = (t - transition_start) / (transition_end - transition_start)
+ local tt = (t - state.transition_start) / (state.transition_end - state.transition_start)
-- Smooth it a bit.
return math.sin(tt * 3.14159265358 * 0.5)
end
projects / nageru / blobdiff