1 Entries are sorted chronologically from oldest to youngest within each release,
2 releases are sorted from youngest to oldest.
6 - v410 Quicktime Uncompressed 4:4:4 10-bit encoder and decoder
7 - SBaGen (SBG) binaural beats script demuxer
10 - dv: add timecode to metadata
15 - openal input device added
16 - boxblur filter added
18 - Flash Screen Video 2 decoder
19 - lavfi input device added
20 - added avconv, which is almost the same for now, except
21 for a few incompatible changes in the options, which will hopefully make them
22 easier to use. The changes are:
23 * The options placement is now strictly enforced! While in theory the
24 options for ffmpeg should be given in [input options] -i INPUT [output
25 options] OUTPUT order, in practice it was possible to give output options
26 before the -i and it mostly worked. Except when it didn't - the behavior was
27 a bit inconsistent. In avconv, it is not possible to mix input and output
28 options. All non-global options are reset after an input or output filename.
29 * All per-file options are now truly per-file - they apply only to the next
30 input or output file and specifying different values for different files
31 will now work properly (notably -ss and -t options).
32 * All per-stream options are now truly per-stream - it is possible to
33 specify which stream(s) should a given option apply to. See the Stream
34 specifiers section in the avconv manual for details.
35 * In ffmpeg some options (like -newvideo/-newaudio/...) are irregular in the
36 sense that they're specified after the output filename instead of before,
37 like all other options. In avconv this irregularity is removed, all options
38 apply to the next input or output file.
39 * -newvideo/-newaudio/-newsubtitle options were removed. Not only were they
40 irregular and highly confusing, they were also redundant. In avconv the -map
41 option will create new streams in the output file and map input streams to
42 them. E.g. avconv -i INPUT -map 0 OUTPUT will create an output stream for
43 each stream in the first input file.
44 * The -map option now has slightly different and more powerful syntax:
45 + Colons (':') are used to separate file index/stream type/stream index
46 instead of dots. Comma (',') is used to separate the sync stream instead
47 of colon.. This is done for consistency with other options.
48 + It's possible to specify stream type. E.g. -map 0:a:2 creates an
49 output stream from the third input audio stream.
50 + Omitting the stream index now maps all the streams of the given type,
51 not just the first. E.g. -map 0:s creates output streams for all the
52 subtitle streams in the first input file.
53 + Since -map can now match multiple streams, negative mappings were
54 introduced. Negative mappings disable some streams from an already
55 defined map. E.g. '-map 0 -map -0:a:1' means 'create output streams for
56 all the stream in the first input file, except for the second audio
58 * There is a new option -c (or -codec) for choosing the decoder/encoder to
59 use, which allows to precisely specify target stream(s) consistently with
60 other options. E.g. -c:v lib264 sets the codec for all video streams, -c:a:0
61 libvorbis sets the codec for the first audio stream and -c copy copies all
62 the streams without reencoding. Old -vcodec/-acodec/-scodec options are now
64 * It is now possible to precisely specify which stream should an AVOption
65 apply to. E.g. -b:v:0 2M sets the bitrate for the first video stream, while
66 -b:a 128k sets the bitrate for all audio streams. Note that the old -ab 128k
67 syntax is deprecated and will stop working soon.
68 * -map_chapters now takes only an input file index and applies to the next
69 output file. This is consistent with how all the other options work.
70 * -map_metadata now takes only an input metadata specifier and applies to
71 the next output file. Output metadata specifier is now part of the option
72 name, similarly to the AVOptions/map/codec feature above.
73 * -metadata can now be used to set metadata on streams and chapters, e.g.
74 -metadata:s:1 language=eng sets the language of the first stream to 'eng'.
75 This made -vlang/-alang/-slang options redundant, so they were removed.
76 * -qscale option now uses stream specifiers and applies to all streams, not
77 just video. I.e. plain -qscale number would now apply to all streams. To get
78 the old behavior, use -qscale:v. Also there is now a shortcut -q for -qscale
79 and -aq is now an alias for -q:a.
80 * -vbsf/-absf/-sbsf options were removed and replaced by a -bsf option which
81 uses stream specifiers. Use -bsf:v/a/s instead of the old options.
82 * -itsscale option now uses stream specifiers, so its argument is only the
84 * -intra option was removed, use -g 0 for the same effect.
85 * -psnr option was removed, use -flags +psnr for the same effect.
86 * -vf option is now an alias to the new -filter option, which uses stream specifiers.
87 * -vframes/-aframes/-dframes options are now aliases to the new -frames option.
88 * -vtag/-atag/-stag options are now aliases to the new -tag option.
91 - ashowinfo filter added
92 - Windows Media Image decoder
95 - Speex encoder via libspeex
96 - JSON output in ffprobe
98 - Optional C++ Support (needed for libstagefright)
99 - H.264 Decoding on Android via Stagefright
101 - BIN/XBIN/ADF/IDF text file decoder
102 - aconvert audio filter added
103 - audio support to lavfi input device added
104 - libcdio-paranoia input device for audio CD grabbing
105 - Apple ProRes decoder
106 - CELT in Ogg demuxing
107 - G.723.1 demuxer and decoder
108 - libmodplug support (--enable-libmodplug)
109 - VC-1 interlaced decoding
110 - libutvideo wrapper (--enable-libutvideo)
111 - aevalsrc audio source added
113 - Speex encoding via libspeex
114 - 4:2:2 H.264 decoding support
115 - 4:2:2 and 4:4:4 H.264 encoding with libx264
116 - Pulseaudio input device
118 - Video Decoder Acceleration (VDA) HWAccel module.
119 - replacement Indeo 3 decoder
120 - new ffmpeg option: -map_channel
121 - volume audio filter added
122 - earwax audio filter added
123 - libv4l2 support (--enable-libv4l2)
124 - TLS/SSL and HTTPS protocol support
125 - AVOptions API rewritten and documented
126 - most of CODEC_FLAG2_*, some CODEC_FLAG_* and many codec-specific fields in
127 AVCodecContext deprecated. Codec private options should be used instead.
128 - Properly working defaults in libx264 wrapper, support for native presets.
129 - Encrypted OMA files support
130 - Discworld II BMV decoding support
132 - OS X Video Decoder Acceleration (VDA) support
133 - compact and csv output in ffprobe
135 - IFF Amiga Continuous Bitmap (ACBM) decoder
137 - CRI ADX audio format demuxer
138 - Playstation Portable PMP format demuxer
139 - Microsoft Windows ICO demuxer
141 - PCM format support in OMA demuxer
143 - new option: -report
144 - Dxtory capture format decoder
146 - Simple segmenting muxer
147 - thumbnail video filter
152 - many many things we forgot because we rather write code than changelogs
153 - WebM support in Matroska de/muxer
154 - low overhead Ogg muxing
156 - VP8 de/encoding via libvpx
157 - Demuxer for On2's IVF format
158 - Pictor/PC Paint decoder
160 - HE-AAC v2 encoding with libaacplus
161 - libfaad2 wrapper removed
162 - DTS-ES extension (XCh) decoding support
164 - RTSP tunneling over HTTP
165 - RTP depacketization of SVQ3
166 - -strict inofficial replaced by -strict unofficial
167 - ffplay -exitonkeydown and -exitonmousedown options added
168 - native GSM / GSM MS decoder
169 - RTP depacketization of QDM2
170 - ANSI/ASCII art playback system
171 - Lego Mindstorms RSO de/muxer
172 - libavcore added (and subsequently removed)
173 - SubRip subtitle file muxer and demuxer
174 - Chinese AVS encoding via libxavs
175 - ffprobe -show_packets option added
176 - RTP packetization of Theora and Vorbis
177 - RTP depacketization of MP4A-LATM
178 - RTP packetization and depacketization of VP8
180 - Apple HTTP Live Streaming demuxer
183 - G.722 ADPCM audio encoder/decoder
186 - frei0r wrapper filter
187 - change crop filter syntax to width:height:x:y
188 - make the crop filter accept parametric expressions
189 - make ffprobe accept AVFormatContext options
192 - Demuxer for Leitch/Harris' VR native stream format (LXF)
193 - RTP depacketization of the X-QT QuickTime format
194 - SAP (Session Announcement Protocol, RFC 2974) muxer and demuxer
196 - ffmpeg -crop* options removed
197 - transpose filter added
198 - ffmpeg -force_key_frames option added
199 - demuxer for receiving raw rtp:// URLs without an SDP description
200 - single stream LATM/LOAS decoder
201 - setpts filter added
202 - Win64 support for optimized x86 assembly functions
203 - MJPEG/AVI1 to JPEG/JFIF bitstream filter
204 - ASS subtitle encoder and decoder
205 - IEC 61937 encapsulation for E-AC-3, TrueHD, DTS-HD (for HDMI passthrough)
206 - overlay filter added
207 - rename aspect filter to setdar, and pixelaspect to setsar
209 - Mobotix .mxg demuxer
210 - frei0r source added
211 - hqdn3d filter added
212 - RTP depacketization of QCELP
214 - gradfun filter added
216 - replace the ocv_smooth filter with a more generic ocv filter
217 - Windows Televison (WTV) demuxer
218 - FFmpeg metadata format muxer and demuxer
219 - SubRip (srt) subtitle encoder and decoder
220 - floating-point AC-3 encoder added
222 - ffmpeg -copytb option added
224 - Wing Commander IV movies decoder added
226 - Bink version 'b' audio and video decoder
227 - Bitmap Brothers JV playback system
228 - Apple HTTP Live Streaming protocol handler
229 - sndio support for playback and record
230 - Linux framebuffer input device added
231 - Chronomaster DFA decoder
233 - MicroDVD subtitle file muxer and demuxer
234 - Playstation Portable PMP format demuxer
235 - fieldorder video filter added
236 - AAC encoding via libvo-aacenc
237 - AMR-WB encoding via libvo-amrwbenc
239 - Mobotix MxPEG decoder
240 - VP8 frame-multithreading
241 - NEON optimizations for VP8
242 - Lots of deprecated API cruft removed
243 - fft and imdct optimizations for AVX (Sandy Bridge) processors
244 - showinfo filter added
245 - SMPTE 302M AES3 audio decoder
246 - Apple Core Audio Format muxer
247 - 9bit and 10bit per sample support in the H.264 decoder
248 - 9bit and 10bit FFV1 encoding / decoding
250 - select filter added
251 - sdl output device added
252 - libmpcodecs video filter support (3 times as many filters than before)
253 - mpeg2 aspect ratio dection fixed
254 - libxvid aspect pickiness fixed
255 - Frame multithreaded decoding
256 - E-AC-3 audio encoder
257 - ac3enc: add channel coupling support
258 - floating-point sample format support to the ac3, eac3, dca, aac, and vorbis decoders.
259 - H264/MPEG frame-level multi-threading
260 - All av_metadata_* functions renamed to av_dict_* and moved to libavutil
261 - 4:4:4 H.264 decoding support
262 - 10-bit H.264 optimizations for x86
263 - lut, lutrgb, and lutyuv filters added
264 - buffersink libavfilter sink added
265 - Bump libswscale for recently reported ABI break
266 - New J2K encoder (via OpenJPEG)
271 - all the changes for 0.8, but keeping API/ABI compatibility with the 0.6 release
276 - PB-frame decoding for H.263
277 - deprecated vhook subsystem removed
278 - deprecated old scaler removed
280 - Alpha channel scaler
282 - RTP packetization of H.263
283 - RTP packetization of AMR
284 - RTP depacketization of Vorbis
285 - CorePNG decoding support
286 - Cook multichannel decoding support
287 - introduced avlanguage helpers in libavformat
288 - 8088flex TMV demuxer and decoder
289 - per-stream language-tags extraction in asfdec
290 - V210 decoder and encoder
291 - remaining GPL parts in AC-3 decoder converted to LGPL
293 - SoX native format muxer and demuxer
294 - AMR-NB decoding/encoding, AMR-WB decoding via OpenCORE libraries
296 - Electronic Arts Madcow decoder
297 - DivX (XSUB) subtitle encoder
298 - nonfree libamr support for AMR-NB/WB decoding/encoding removed
299 - experimental AAC encoder
300 - RTP depacketization of ASF and RTSP from WMS servers
301 - RTMP support in libavformat
302 - noX handling for OPT_BOOL X options
304 - IEC-61937 compatible Muxer
306 - Bluray (PGS) subtitle decoder
307 - LPCM support in MPEG-TS (HDMV RID as found on Blu-ray disks)
309 - Core Audio Format demuxer
311 - MD STUDIO audio demuxer
312 - RF64 support in WAV demuxer
313 - MPEG-4 Audio Lossless Coding (ALS) decoder
314 - -formats option split into -formats, -codecs, -bsfs, and -protocols
316 - CDG demuxer and decoder
318 - Auravision Aura 1 and 2 decoders
319 - Deluxe Paint Animation playback system
321 - Adobe Filmstrip muxer and demuxer
322 - RTP depacketization of H.263
323 - Bink demuxer and audio/video decoders
324 - enable symbol versioning by default for linkers that support it
325 - IFF PBM/ILBM bitmap decoder
328 - RTP depacketization of AMR
334 - Kega Game Video (KGV1) decoder
335 - VorbisComment writing for FLAC, Ogg FLAC and Ogg Speex files
336 - RTP depacketization of Theora
337 - HTTP Digest authentication
338 - RTMP/RTMPT/RTMPS/RTMPE/RTMPTE protocol support via librtmp
339 - Psygnosis YOP demuxer and video decoder
340 - spectral extension support in the E-AC-3 decoder
341 - unsharp video filter
342 - RTP hinting in the mov/3gp/mp4 muxer
343 - Dirac in Ogg demuxing
344 - seek to keyframes in Ogg
345 - 4:2:2 and 4:4:4 Theora decoding
346 - 35% faster VP3/Theora decoding
347 - faster AAC decoding
348 - faster H.264 decoding
349 - RealAudio 1.0 (14.4K) encoder
354 - DV50 AKA DVCPRO50 encoder, decoder, muxer and demuxer
355 - TechSmith Camtasia (TSCC) video decoder
356 - IBM Ultimotion (ULTI) video decoder
357 - Sierra Online audio file demuxer and decoder
358 - Apple QuickDraw (qdrw) video decoder
359 - Creative ADPCM audio decoder (16 bits as well as 8 bits schemes)
360 - Electronic Arts Multimedia (WVE/UV2/etc.) file demuxer
361 - Miro VideoXL (VIXL) video decoder
362 - H.261 video encoder
364 - Nullsoft Video (NSV) file demuxer
365 - Shorten audio decoder
367 - Apple Lossless Audio Codec (ALAC) decoder
368 - Winnov WNV1 video decoder
369 - Autodesk Animator Studio Codec (AASC) decoder
370 - Indeo 2 video decoder
371 - Fraps FPS1 video decoder
372 - Snow video encoder/decoder
373 - Sonic audio encoder/decoder
374 - Vorbis audio decoder
375 - Macromedia ADPCM decoder
376 - Duck TrueMotion 2 video decoder
377 - support for decoding FLX and DTA extensions in FLIC files
378 - H.264 custom quantization matrices support
379 - ffserver fixed, it should now be usable again
381 - Real Cooker audio decoder
382 - TrueSpeech audio decoder
383 - WMA2 audio decoder fixed, now all files should play correctly
384 - RealAudio 14.4 and 28.8 decoders fixed
386 - build system improvements
387 - tabs and trailing whitespace removed from the codebase
388 - CamStudio video decoder
389 - AIFF/AIFF-C audio format, encoding and decoding
390 - ADTS AAC file reading and writing
391 - Creative VOC file reading and writing
392 - American Laser Games multimedia (*.mm) playback system
393 - Zip Motion Blocks Video decoder
394 - improved Theora/VP3 decoder
395 - True Audio (TTA) decoder
396 - AVS demuxer and video decoder
398 - Smacker demuxer and decoder
399 - NuppelVideo/MythTV demuxer and RTjpeg decoder
401 - MPEG-2 intra VLC support
402 - MPEG-2 4:2:2 encoder
403 - Flash Screen Video decoder
405 - Chinese AVS decoder
408 - VC-1/WMV3/WMV9 video decoder
411 - VMware video decoder
414 - WavPack lossless audio decoder
415 - Targa (.TGA) picture decoder
416 - Vorbis audio encoder
417 - Delphine Software .cin demuxer/audio and video decoder
418 - Tiertex .seq demuxer/video decoder
420 - TIFF picture encoder and decoder
421 - GIF picture decoder
422 - Intel Music Coder decoder
423 - Zip Motion Blocks Video encoder
425 - Flash Screen Video encoder
426 - Theora encoding via libtheora
429 - GSM-MS encoder and decoder
431 - DXA demuxer and decoder
433 - Gamecube movie (.THP) playback system
434 - Blackfin optimizations
435 - Interplay C93 demuxer and video decoder
436 - Bethsoft VID demuxer and video decoder
439 - V.Flash PTX decoder
440 - RoQ muxer, RoQ audio encoder
441 - Renderware TXD demuxer and decoder
442 - extern C declarations for C++ removed from headers
443 - sws_flags command line option
447 - OS/2 support removed and restored again
450 - additional SPARC (VIS) optimizations
452 - slice-based parallel H.264 decoding
453 - Monkey's Audio demuxer and decoder
454 - AMV audio and video decoder
456 - H.264 PAFF decoding
457 - Nellymoser ASAO decoder
458 - Beam Software SIFF demuxer and decoder
459 - libvorbis Vorbis decoding removed in favor of native decoder
460 - IntraX8 (J-Frame) subdecoder for WMV2 and VC-1
461 - Ogg (Theora, Vorbis and FLAC) muxer
462 - The "device" muxers and demuxers are now in a new libavdevice library
463 - PC Paintbrush PCX decoder
464 - Sun Rasterfile decoder
465 - TechnoTrend PVA demuxer
466 - Linux Media Labs MPEG-4 (LMLM4) demuxer
467 - AVM2 (Flash 9) SWF muxer
468 - QT variant of IMA ADPCM encoder
470 - iPod/iPhone compatible mp4 muxer
472 - MSN TCP Webcam stream demuxer
473 - RL2 demuxer / decoder
476 - non-recursive Makefiles
478 - MAXIS EA XA (.xa) demuxer / decoder
482 - Electronic Arts CMV decoder
483 - Motion Pixels Video decoder
484 - Motion Pixels MVI demuxer
485 - removed animated GIF decoder/demuxer
486 - D-Cinema audio muxer
487 - Electronic Arts TGV decoder
488 - Apple Lossless Audio Codec (ALAC) encoder
490 - floating point PCM encoder/decoder
492 - DV100 AKA DVCPRO HD decoder and demuxer
493 - E-AC-3 support added to AC-3 decoder
494 - Nellymoser ASAO encoder
495 - ASS and SSA demuxer and muxer
496 - liba52 wrapper removed
497 - SVQ3 watermark decoding support
498 - Speex decoding via libspeex
499 - Electronic Arts TGQ decoder
501 - QCELP / PureVoice decoder
503 - hybrid WavPack support
504 - R3D REDCODE demuxer
505 - ALSA support for playback and record
506 - Electronic Arts TQI decoder
507 - OpenJPEG based JPEG 2000 decoder
508 - NC (NC4600) camera file demuxer
509 - Gopher client support
511 - generic metadata API
512 - flash ScreenVideo2 encoder
517 - DV encoder, DV muxer
518 - Microsoft RLE video decoder
519 - Microsoft Video-1 decoder
520 - Apple Animation (RLE) decoder
521 - Apple Graphics (SMC) decoder
522 - Apple Video (RPZA) decoder
524 - Sega FILM (CPK) file demuxer
525 - Westwood multimedia support (VQA & AUD files)
526 - Id Quake II CIN playback support
528 - FLIC playback support
529 - RealVideo 2.0 (RV20) decoder
530 - Duck TrueMotion v1 (DUCK) video decoder
531 - Sierra VMD demuxer and video decoder
532 - MSZH and ZLIB decoder support
536 - rate distortion optimal cbp support
537 - rate distorted optimal ac prediction for MPEG-4
538 - rate distorted optimal lambda->qp support
539 - AAC encoding with libfaac
540 - Sunplus JPEG codec (SP5X) support
541 - use Lagrange multipler instead of QP for ratecontrol
542 - Theora/VP3 decoding support
543 - XA and ADX ADPCM codecs
544 - export MPEG-2 active display area / pan scan
545 - Add support for configuring with IBM XLC
546 - floating point AAN DCT
547 - initial support for zygo video (not complete)
549 - new audio/video parser API
551 - av_read_frame() and av_seek_frame() support
552 - missing last frame fixes
553 - seek by mouse in ffplay
554 - noise reduction of DCT coefficients
555 - H.263 OBMC & 4MV support
556 - H.263 alternative inter vlc support
558 - H.263 slice structured mode
559 - interlaced DCT support for MPEG-2 encoding
560 - stuffing to stay above min_bitrate
561 - MB type & QP visualization
562 - frame stepping for ffplay
563 - interlaced motion estimation
564 - alternate scantable support
565 - SVCD scan offset support
568 - quantizer noise shaping
569 - G.726 ADPCM audio codec
571 - multithreaded/SMP motion estimation
572 - multithreaded/SMP encoding for MPEG-1/MPEG-2/MPEG-4/H.263
573 - multithreaded/SMP decoding for MPEG-2
575 - Metrowerks CodeWarrior suppport
576 - H.263+ custom pcf support
577 - nicer output for 'ffmpeg -formats'
579 - SGI image format, encoding and decoding
580 - H.264 loop filter support
581 - H.264 CABAC support
582 - nicer looking arrows for the motion vector visualization
583 - improved VCD support
584 - audio timestamp drift compensation
585 - MPEG-2 YUV 422/444 support
586 - polyphase kaiser windowed sinc and blackman nuttall windowed sinc audio resample
587 - better image scaling
589 - correctly interleave packets during encoding
590 - VIS optimized motion compensation
591 - intra_dc_precision>0 encoding support
592 - support reuse of motion vectors/MB types/field select values of the source video
593 - more accurate deblock filter
595 - many optimizations and bugfixes
596 - FunCom ISS audio file demuxer and according ADPCM decoding
601 - MPEG-2 video encoding (Michael)
602 - Id RoQ playback subsystem (Mike Melanson and Tim Ferguson)
603 - Wing Commander III Movie (.mve) file playback subsystem (Mike Melanson
605 - Xan DPCM audio decoder (Mario Brito)
606 - Interplay MVE playback subsystem (Mike Melanson)
607 - Duck DK3 and DK4 ADPCM audio decoders (Mike Melanson)
612 - RealAudio 1.0 (14_4) and 2.0 (28_8) native decoders. Author unknown, code from mplayerhq
613 (originally from public domain player for Amiga at http://www.honeypot.net/audio)
614 - current version now also compiles with older GCC (Fabrice)
615 - 4X multimedia playback system including 4xm file demuxer (Mike
616 Melanson), and 4X video and audio codecs (Michael)
617 - Creative YUV (CYUV) decoder (Mike Melanson)
618 - FFV1 codec (our very simple lossless intra only codec, compresses much better
619 than HuffYUV) (Michael)
620 - ASV1 (Asus), H.264, Intel indeo3 codecs have been added (various)
621 - tiny PNG encoder and decoder, tiny GIF decoder, PAM decoder (PPM with
622 alpha support), JPEG YUV colorspace support. (Fabrice Bellard)
623 - ffplay has been replaced with a newer version which uses SDL (optionally)
624 for multiplatform support (Fabrice)
625 - Sorenson Version 3 codec (SVQ3) support has been added (decoding only) - donated
627 - AMR format has been added (Johannes Carlsson)
628 - 3GP support has been added (Johannes Carlsson)
629 - VP3 codec has been added (Mike Melanson)
630 - more MPEG-1/2 fixes
631 - better multiplatform support, MS Visual Studio fixes (various)
632 - AltiVec optimizations (Magnus Damn and others)
633 - SH4 processor support has been added (BERO)
634 - new public interfaces (avcodec_get_pix_fmt) (Roman Shaposhnick)
635 - VOB streaming support (Brian Foley)
636 - better MP3 autodetection (Andriy Rysin)
637 - qpel encoding (Michael)
638 - 4mv+b frames encoding finally fixed (Michael)
639 - chroma ME (Michael)
640 - 5 comparison functions for ME (Michael)
641 - B-frame encoding speedup (Michael)
642 - WMV2 codec (unfinished - Michael)
643 - user specified diamond size for EPZS (Michael)
644 - Playstation STR playback subsystem, still experimental (Mike and Michael)
645 - ASV2 codec (Michael)
646 - CLJR decoder (Alex)
648 .. And lots more new enhancements and fixes.
653 - completely new integer only MPEG audio layer 1/2/3 decoder rewritten
655 - Recoded DCT and motion vector search with gcc (no longer depends on nasm)
656 - fix quantization bug in AC3 encoder
657 - added PCM codecs and format. Corrected WAV/AVI/ASF PCM issues
658 - added prototype ffplay program
659 - added GOB header parsing on H.263/H.263+ decoder (Juanjo)
660 - bug fix on MCBPC tables of H.263 (Juanjo)
661 - bug fix on DC coefficients of H.263 (Juanjo)
662 - added Advanced Prediction Mode on H.263/H.263+ decoder (Juanjo)
663 - now we can decode H.263 streams found in QuickTime files (Juanjo)
664 - now we can decode H.263 streams found in VIVO v1 files(Juanjo)
665 - preliminary RTP "friendly" mode for H.263/H.263+ coding. (Juanjo)
666 - added GOB header for H.263/H.263+ coding on RTP mode (Juanjo)
667 - now H.263 picture size is returned on the first decoded frame (Juanjo)
668 - added first regression tests
669 - added MPEG-2 TS demuxer
670 - new demux API for libav
671 - more accurate and faster IDCT (Michael)
672 - faster and entropy-controlled motion search (Michael)
673 - two pass video encoding (Michael)
674 - new video rate control (Michael)
675 - added MSMPEG4V1, MSMPEGV2 and WMV1 support (Michael)
676 - great performance improvement of video encoders and decoders (Michael)
677 - new and faster bit readers and vlc parsers (Michael)
678 - high quality encoding mode: tries all macroblock/VLC types (Michael)
679 - added DV video decoder
680 - preliminary RTP/RTSP support in ffserver and libavformat
681 - H.263+ AIC decoding/encoding support (Juanjo)
682 - VCD MPEG-PS mode (Juanjo)
683 - PSNR stuff (Juanjo)
684 - simple stats output (Juanjo)
685 - 16-bit and 15-bit RGB/BGR/GBR support (Bisqwit)
690 - some header fixes (Zdenek Kabelac <kabi at informatics.muni.cz>)
691 - many MMX optimizations (Nick Kurshev <nickols_k at mail.ru>)
692 - added configure system (actually a small shell script)
693 - added MPEG audio layer 1/2/3 decoding using LGPL'ed mpglib by
694 Michael Hipp (temporary solution - waiting for integer only
696 - fixed VIDIOCSYNC interrupt
697 - added Intel H.263 decoding support ('I263' AVI fourCC)
698 - added Real Video 1.0 decoding (needs further testing)
699 - simplified image formats again. Added PGM format (=grey
700 pgm). Renamed old PGM to PGMYUV.
701 - fixed msmpeg4 slice issues (tell me if you still find problems)
702 - fixed OpenDivX bugs with newer versions (added VOL header decoding)
703 - added support for MPlayer interface
704 - added macroblock skip optimization
705 - added MJPEG decoder
706 - added mmx/mmxext IDCT from libmpeg2
707 - added pgmyuvpipe, ppm, and ppm_pipe formats (original patch by Celer
708 <celer at shell.scrypt.net>)
709 - added pixel format conversion layer (e.g. for MJPEG or PPM)
710 - added deinterlacing option
712 - MPEG-4 vol header fixes (Jonathan Marsden <snmjbm at pacbell.net>)
713 - ARM optimizations (Lionel Ulmer <lionel.ulmer at free.fr>).
714 - Windows porting of file converter
715 - added MJPEG raw format (input/ouput)
716 - added JPEG image format support (input/output)
721 - fixed some std header definitions (Bjorn Lindgren
722 <bjorn.e.lindgren at telia.com>).
723 - added MPEG demuxer (MPEG-1 and 2 compatible).
725 - added prototype RM demuxer
726 - added AC3 decoding (done with libac3 by Aaron Holtzman)
727 - added decoding codec parameter guessing (.e.g. for MPEG, because the
728 header does not include them)
729 - fixed header generation in MPEG-1, AVI and ASF muxer: wmplayer can now
730 play them (only tested video)
731 - fixed H.263 white bug
732 - fixed phase rounding in img resample filter
733 - add MMX code for polyphase img resample filter
734 - added CPU autodetection
735 - added generic title/author/copyright/comment string handling (ASF and RM
737 - added SWF demux to extract MP3 track (not usable yet because no MP3
739 - added fractional frame rate support
740 - codecs are no longer searched by read_header() (should fix ffserver
746 - BGR24 patch (initial patch by Jeroen Vreeken <pe1rxq at amsat.org>)
747 - fixed raw yuv output
748 - added motion rounding support in MPEG-4
749 - fixed motion bug rounding in MSMPEG4
750 - added B-frame handling in video core
751 - added full MPEG-1 decoding support
752 - added partial (frame only) MPEG-2 support
753 - changed the FOURCC code for H.263 to "U263" to be able to see the
754 +AVI/H.263 file with the UB Video H.263+ decoder. MPlayer works with
755 this +codec ;) (JuanJo).
756 - Halfpel motion estimation after MB type selection (JuanJo)
757 - added pgm and .Y.U.V output format
758 - suppressed 'img:' protocol. Simply use: /tmp/test%d.[pgm|Y] as input or
760 - added pgmpipe I/O format (original patch from Martin Aumueller
761 <lists at reserv.at>, but changed completely since we use a format
762 instead of a protocol)
767 - added H.263/MPEG-4/MSMPEG4 decoding support. MPEG-4 decoding support
768 (for OpenDivX) is almost complete: 8x8 MVs and rounding are
769 missing. MSMPEG4 support is complete.
770 - added prototype MPEG-1 decoder. Only I- and P-frames handled yet (it
771 can decode ffmpeg MPEGs :-)).
772 - added libavcodec API documentation (see apiexample.c).
773 - fixed image polyphase bug (the bottom of some images could be
775 - added support for non clipped motion vectors (decoding only)
776 and image sizes non-multiple of 16
777 - added support for AC prediction (decoding only)
778 - added file overwrite confirmation (can be disabled with -y)
779 - added custom size picture to H.263 using H.263+ (Juanjo)
784 - added MSMPEG4 (aka DivX) compatible encoder. Changed default codec
785 of AVI and ASF to DIV3.
786 - added -me option to set motion estimation method
787 (default=log). suppressed redundant -hq option.
788 - added options -acodec and -vcodec to force a given codec (useful for
791 - improved dct_quantize speed
792 - factorized some motion estimation code
797 - removing grab code from ffserver and moved it to ffmpeg. Added
798 multistream support to ffmpeg.
799 - added timeshifting support for live feeds (option ?date=xxx in the
801 - added high quality image resize code with polyphase filter (need
802 mmx/see optimization). Enable multiple image size support in ffserver.
803 - added multi live feed support in ffserver
804 - suppressed master feature from ffserver (it should be done with an
805 external program which opens the .ffm url and writes it to another
807 - added preliminary support for video stream parsing (WAV and AVI half
808 done). Added proper support for audio/video file conversion in
810 - added preliminary support for video file sending from ffserver
811 - redesigning I/O subsystem: now using URL based input and output
813 - added WAV format support
814 - added "tty user interface" to ffmpeg to stop grabbing gracefully
815 - added MMX/SSE optimizations to SAD (Sums of Absolutes Differences)
816 (Juan J. Sierralta P. a.k.a. "Juanjo" <juanjo at atmlab.utfsm.cl>)
817 - added MMX DCT from mpeg2_movie 1.5 (Juanjo)
818 - added new motion estimation algorithms, log and phods (Juanjo)
819 - changed directories: libav for format handling, libavcodec for
825 - added stereo in MPEG audio encoder
830 - added 'high quality' mode which use motion vectors. It can be used in
831 real time at low resolution.
832 - fixed rounding problems which caused quality problems at high
833 bitrates and large GOP size
836 version 0.3.2: small fixes
842 version 0.3.1: added avi/divx support
845 - added MPEG-4 codec compatible with OpenDivX. It is based on the H.263 codec
846 - added sound for flash format (not tested)
849 version 0.3: initial public release