1 // Intensity Shuttle USB3 capture driver, v0.4
2 // Can download 8-bit and 10-bit UYVY/v210 frames from HDMI, quite stable
3 // (can do captures for hours at a time with no drops), except during startup
4 // 576p60/720p60/1080i60 works, 1080p60 does not work (firmware limitation)
5 // Audio comes out as 8-channel 24-bit raw audio.
7 #if (defined(__i386__) || defined(__x86_64__)) && defined(__GNUC__)
8 #define HAS_MULTIVERSIONING 1
15 #include <netinet/in.h>
21 #if HAS_MULTIVERSIONING
22 #include <immintrin.h>
24 #include "bmusb/bmusb.h"
28 #include <condition_variable>
40 using namespace std::placeholders;
42 #define USB_VENDOR_BLACKMAGIC 0x1edb
44 #define HEADER_SIZE 44
45 //#define HEADER_SIZE 0
46 #define AUDIO_HEADER_SIZE 4
48 #define FRAME_SIZE (8 << 20) // 8 MB.
49 #define USB_VIDEO_TRANSFER_SIZE (128 << 10) // 128 kB.
53 card_connected_callback_t BMUSBCapture::card_connected_callback = nullptr;
54 bool BMUSBCapture::hotplug_existing_devices = false;
61 atomic<bool> should_quit;
63 int find_xfer_size_for_width(int width)
65 // Video seems to require isochronous packets scaled with the width;
66 // seemingly six lines is about right, rounded up to the required 1kB
68 int size = width * 2 * 6;
69 // Note that for 10-bit input, you'll need to increase size accordingly.
70 //size = size * 4 / 3;
71 if (size % 1024 != 0) {
78 void change_xfer_size_for_width(int width, libusb_transfer *xfr)
80 assert(width >= MIN_WIDTH);
81 size_t size = find_xfer_size_for_width(width);
82 int num_iso_pack = xfr->length / size;
83 if (num_iso_pack != xfr->num_iso_packets ||
84 size != xfr->iso_packet_desc[0].length) {
85 xfr->num_iso_packets = num_iso_pack;
86 libusb_set_iso_packet_lengths(xfr, size);
90 struct VideoFormatEntry {
91 uint16_t normalized_video_format;
92 unsigned width, height, second_field_start;
93 unsigned extra_lines_top, extra_lines_bottom;
94 unsigned frame_rate_nom, frame_rate_den;
98 // Get details for the given video format; returns false if detection was incomplete.
99 bool decode_video_format(uint16_t video_format, VideoFormat *decoded_video_format)
101 decoded_video_format->id = video_format;
102 decoded_video_format->interlaced = false;
104 // TODO: Add these for all formats as we find them.
105 decoded_video_format->extra_lines_top = decoded_video_format->extra_lines_bottom = decoded_video_format->second_field_start = 0;
107 if (video_format == 0x0800) {
108 // No video signal. These green pseudo-frames seem to come at about 30.13 Hz.
109 // It's a strange thing, but what can you do.
110 decoded_video_format->width = 720;
111 decoded_video_format->height = 525;
112 decoded_video_format->extra_lines_top = 0;
113 decoded_video_format->extra_lines_bottom = 0;
114 decoded_video_format->frame_rate_nom = 3013;
115 decoded_video_format->frame_rate_den = 100;
116 decoded_video_format->has_signal = false;
119 if ((video_format & 0xe800) != 0xe800) {
120 printf("Video format 0x%04x does not appear to be a video format. Assuming 60 Hz.\n",
122 decoded_video_format->width = 0;
123 decoded_video_format->height = 0;
124 decoded_video_format->extra_lines_top = 0;
125 decoded_video_format->extra_lines_bottom = 0;
126 decoded_video_format->frame_rate_nom = 60;
127 decoded_video_format->frame_rate_den = 1;
128 decoded_video_format->has_signal = false;
132 decoded_video_format->has_signal = true;
134 // NTSC (480i59.94, I suppose). A special case, see below.
135 if (video_format == 0xe901 || video_format == 0xe9c1 || video_format == 0xe801) {
136 decoded_video_format->width = 720;
137 decoded_video_format->height = 480;
138 decoded_video_format->extra_lines_top = 17;
139 decoded_video_format->extra_lines_bottom = 28;
140 decoded_video_format->frame_rate_nom = 30000;
141 decoded_video_format->frame_rate_den = 1001;
142 decoded_video_format->second_field_start = 280;
143 decoded_video_format->interlaced = true;
147 // PAL (576i50, I suppose). A special case, see below.
148 if (video_format == 0xe909 || video_format == 0xe9c9 || video_format == 0xe809 || video_format == 0xebe9 || video_format == 0xebe1) {
149 decoded_video_format->width = 720;
150 decoded_video_format->height = 576;
151 decoded_video_format->extra_lines_top = 22;
152 decoded_video_format->extra_lines_bottom = 27;
153 decoded_video_format->frame_rate_nom = 25;
154 decoded_video_format->frame_rate_den = 1;
155 decoded_video_format->second_field_start = 335;
156 decoded_video_format->interlaced = true;
160 // 0x8 seems to be a flag about availability of deep color on the input,
161 // except when it's not (e.g. it's the only difference between NTSC
162 // and PAL). Rather confusing. But we clear it here nevertheless, because
163 // usually it doesn't mean anything.
165 // 0x4 is a flag I've only seen from the D4. I don't know what it is.
166 uint16_t normalized_video_format = video_format & ~0xe80c;
167 constexpr VideoFormatEntry entries[] = {
168 { 0x01f1, 720, 480, 0, 40, 5, 60000, 1001, false }, // 480p59.94 (believed).
169 { 0x0131, 720, 576, 0, 44, 5, 50, 1, false }, // 576p50.
170 { 0x0011, 720, 576, 0, 44, 5, 50, 1, false }, // 576p50 (5:4).
171 { 0x0143, 1280, 720, 0, 25, 5, 50, 1, false }, // 720p50.
172 { 0x0103, 1280, 720, 0, 25, 5, 60, 1, false }, // 720p60.
173 { 0x0125, 1280, 720, 0, 25, 5, 60, 1, false }, // 720p60.
174 { 0x0121, 1280, 720, 0, 25, 5, 60000, 1001, false }, // 720p59.94.
175 { 0x01c3, 1920, 1080, 0, 0, 0, 30, 1, false }, // 1080p30.
176 { 0x0003, 1920, 1080, 583, 20, 25, 30, 1, true }, // 1080i60.
177 { 0x01e1, 1920, 1080, 0, 0, 0, 30000, 1001, false }, // 1080p29.97.
178 { 0x0021, 1920, 1080, 583, 20, 25, 30000, 1001, true }, // 1080i59.94.
179 { 0x0063, 1920, 1080, 0, 0, 0, 25, 1, false }, // 1080p25.
180 { 0x0043, 1920, 1080, 0, 0, 0, 25, 1, true }, // 1080p50.
181 { 0x008e, 1920, 1080, 0, 0, 0, 24, 1, false }, // 1080p24.
182 { 0x00a1, 1920, 1080, 0, 0, 0, 24000, 1001, false }, // 1080p23.98.
184 for (const VideoFormatEntry &entry : entries) {
185 if (normalized_video_format == entry.normalized_video_format) {
186 decoded_video_format->width = entry.width;
187 decoded_video_format->height = entry.height;
188 decoded_video_format->second_field_start = entry.second_field_start;
189 decoded_video_format->extra_lines_top = entry.extra_lines_top;
190 decoded_video_format->extra_lines_bottom = entry.extra_lines_bottom;
191 decoded_video_format->frame_rate_nom = entry.frame_rate_nom;
192 decoded_video_format->frame_rate_den = entry.frame_rate_den;
193 decoded_video_format->interlaced = entry.interlaced;
198 printf("Unknown video format 0x%04x (normalized 0x%04x). Assuming 720p60.\n", video_format, normalized_video_format);
199 decoded_video_format->width = 1280;
200 decoded_video_format->height = 720;
201 decoded_video_format->frame_rate_nom = 60;
202 decoded_video_format->frame_rate_den = 1;
208 FrameAllocator::~FrameAllocator() {}
210 MallocFrameAllocator::MallocFrameAllocator(size_t frame_size, size_t num_queued_frames)
211 : frame_size(frame_size)
213 for (size_t i = 0; i < num_queued_frames; ++i) {
214 freelist.push(unique_ptr<uint8_t[]>(new uint8_t[frame_size]));
218 FrameAllocator::Frame MallocFrameAllocator::alloc_frame()
223 unique_lock<mutex> lock(freelist_mutex); // Meh.
224 if (freelist.empty()) {
225 printf("Frame overrun (no more spare frames of size %ld), dropping frame!\n",
228 vf.data = freelist.top().release();
229 vf.size = frame_size;
230 freelist.pop(); // Meh.
235 void MallocFrameAllocator::release_frame(Frame frame)
237 if (frame.overflow > 0) {
238 printf("%d bytes overflow after last (malloc) frame\n", int(frame.overflow));
240 unique_lock<mutex> lock(freelist_mutex);
241 freelist.push(unique_ptr<uint8_t[]>(frame.data));
244 bool uint16_less_than_with_wraparound(uint16_t a, uint16_t b)
249 return (b - a < 0x8000);
251 int wrap_b = 0x10000 + int(b);
252 return (wrap_b - a < 0x8000);
256 void BMUSBCapture::queue_frame(uint16_t format, uint16_t timecode, FrameAllocator::Frame frame, deque<QueuedFrame> *q)
258 unique_lock<mutex> lock(queue_lock);
259 if (!q->empty() && !uint16_less_than_with_wraparound(q->back().timecode, timecode)) {
260 printf("Blocks going backwards: prev=0x%04x, cur=0x%04x (dropped)\n",
261 q->back().timecode, timecode);
262 frame.owner->release_frame(frame);
268 qf.timecode = timecode;
270 q->push_back(move(qf));
271 queues_not_empty.notify_one(); // might be spurious
274 void dump_frame(const char *filename, uint8_t *frame_start, size_t frame_len)
276 FILE *fp = fopen(filename, "wb");
277 if (fwrite(frame_start + HEADER_SIZE, frame_len - HEADER_SIZE, 1, fp) != 1) {
278 printf("short write!\n");
283 void dump_audio_block(uint8_t *audio_start, size_t audio_len)
285 fwrite(audio_start + AUDIO_HEADER_SIZE, 1, audio_len - AUDIO_HEADER_SIZE, audiofp);
288 void BMUSBCapture::dequeue_thread_func()
290 if (has_dequeue_callbacks) {
291 dequeue_init_callback();
293 while (!dequeue_thread_should_quit) {
294 unique_lock<mutex> lock(queue_lock);
295 queues_not_empty.wait(lock, [this]{ return dequeue_thread_should_quit || (!pending_video_frames.empty() && !pending_audio_frames.empty()); });
297 if (dequeue_thread_should_quit) break;
299 uint16_t video_timecode = pending_video_frames.front().timecode;
300 uint16_t audio_timecode = pending_audio_frames.front().timecode;
301 AudioFormat audio_format;
302 audio_format.bits_per_sample = 24;
303 audio_format.num_channels = 8;
304 if (uint16_less_than_with_wraparound(video_timecode, audio_timecode)) {
305 printf("Video block 0x%04x without corresponding audio block, dropping.\n",
307 QueuedFrame video_frame = pending_video_frames.front();
308 pending_video_frames.pop_front();
310 video_frame_allocator->release_frame(video_frame.frame);
311 } else if (uint16_less_than_with_wraparound(audio_timecode, video_timecode)) {
312 printf("Audio block 0x%04x without corresponding video block, sending blank frame.\n",
314 QueuedFrame audio_frame = pending_audio_frames.front();
315 pending_audio_frames.pop_front();
317 audio_format.id = audio_frame.format;
319 // Use the video format of the pending frame.
320 QueuedFrame video_frame = pending_video_frames.front();
321 VideoFormat video_format;
322 decode_video_format(video_frame.format, &video_format);
324 frame_callback(audio_timecode,
325 FrameAllocator::Frame(), 0, video_format,
326 audio_frame.frame, AUDIO_HEADER_SIZE, audio_format);
328 QueuedFrame video_frame = pending_video_frames.front();
329 QueuedFrame audio_frame = pending_audio_frames.front();
330 pending_audio_frames.pop_front();
331 pending_video_frames.pop_front();
336 snprintf(filename, sizeof(filename), "%04x%04x.uyvy", video_frame.format, video_timecode);
337 dump_frame(filename, video_frame.frame.data, video_frame.data_len);
338 dump_audio_block(audio_frame.frame.data, audio_frame.data_len);
341 VideoFormat video_format;
342 audio_format.id = audio_frame.format;
343 if (decode_video_format(video_frame.format, &video_format)) {
344 frame_callback(video_timecode,
345 video_frame.frame, HEADER_SIZE, video_format,
346 audio_frame.frame, AUDIO_HEADER_SIZE, audio_format);
348 frame_callback(video_timecode,
349 FrameAllocator::Frame(), 0, video_format,
350 audio_frame.frame, AUDIO_HEADER_SIZE, audio_format);
354 if (has_dequeue_callbacks) {
355 dequeue_cleanup_callback();
359 void BMUSBCapture::start_new_frame(const uint8_t *start)
361 uint16_t format = (start[3] << 8) | start[2];
362 uint16_t timecode = (start[1] << 8) | start[0];
364 if (current_video_frame.len > 0) {
365 // If format is 0x0800 (no signal), add a fake (empty) audio
366 // frame to get it out of the queue.
367 // TODO: Figure out if there are other formats that come with
368 // no audio, and treat them the same.
369 if (format == 0x0800) {
370 FrameAllocator::Frame fake_audio_frame = audio_frame_allocator->alloc_frame();
371 if (fake_audio_frame.data == nullptr) {
372 // Oh well, it's just a no-signal frame anyway.
373 printf("Couldn't allocate fake audio frame, also dropping no-signal video frame.\n");
374 current_video_frame.owner->release_frame(current_video_frame);
375 current_video_frame = video_frame_allocator->alloc_frame();
378 queue_frame(format, timecode, fake_audio_frame, &pending_audio_frames);
381 queue_frame(format, timecode, current_video_frame, &pending_video_frames);
383 // Update the assumed frame width. We might be one frame too late on format changes,
384 // but it's much better than asking the user to choose manually.
385 VideoFormat video_format;
386 if (decode_video_format(format, &video_format)) {
387 assumed_frame_width = video_format.width;
390 //printf("Found frame start, format 0x%04x timecode 0x%04x, previous frame length was %d/%d\n",
392 // //start[7], start[6], start[5], start[4],
393 // read_current_frame, FRAME_SIZE);
395 current_video_frame = video_frame_allocator->alloc_frame();
396 //if (current_video_frame.data == nullptr) {
397 // read_current_frame = -1;
399 // read_current_frame = 0;
403 void BMUSBCapture::start_new_audio_block(const uint8_t *start)
405 uint16_t format = (start[3] << 8) | start[2];
406 uint16_t timecode = (start[1] << 8) | start[0];
407 if (current_audio_frame.len > 0) {
408 //dump_audio_block();
409 queue_frame(format, timecode, current_audio_frame, &pending_audio_frames);
411 //printf("Found audio block start, format 0x%04x timecode 0x%04x, previous block length was %d\n",
412 // format, timecode, read_current_audio_block);
413 current_audio_frame = audio_frame_allocator->alloc_frame();
417 static void dump_pack(const libusb_transfer *xfr, int offset, const libusb_iso_packet_descriptor *pack)
419 // printf("ISO pack%u length:%u, actual_length:%u, offset:%u\n", i, pack->length, pack->actual_length, offset);
420 for (unsigned j = 0; j < pack->actual_length; j++) {
421 //for (int j = 0; j < min(pack->actual_length, 16u); j++) {
422 printf("%02x", xfr->buffer[j + offset]);
425 else if ((j % 8) == 7)
433 void memcpy_interleaved(uint8_t *dest1, uint8_t *dest2, const uint8_t *src, size_t n)
436 uint8_t *dptr1 = dest1;
437 uint8_t *dptr2 = dest2;
439 for (size_t i = 0; i < n; i += 2) {
445 void add_to_frame(FrameAllocator::Frame *current_frame, const char *frame_type_name, const uint8_t *start, const uint8_t *end)
447 if (current_frame->data == nullptr ||
448 current_frame->len > current_frame->size ||
453 int bytes = end - start;
454 if (current_frame->len + bytes > current_frame->size) {
455 current_frame->overflow = current_frame->len + bytes - current_frame->size;
456 current_frame->len = current_frame->size;
457 if (current_frame->overflow > 1048576) {
458 printf("%d bytes overflow after last %s frame\n",
459 int(current_frame->overflow), frame_type_name);
460 current_frame->overflow = 0;
464 if (current_frame->interleaved) {
465 uint8_t *data = current_frame->data + current_frame->len / 2;
466 uint8_t *data2 = current_frame->data2 + current_frame->len / 2;
467 if (current_frame->len % 2 == 1) {
471 if (bytes % 2 == 1) {
474 ++current_frame->len;
477 memcpy_interleaved(data, data2, start, bytes);
478 current_frame->len += bytes;
480 memcpy(current_frame->data + current_frame->len, start, bytes);
481 current_frame->len += bytes;
487 void avx2_dump(const char *name, __m256i n)
489 printf("%-10s:", name);
490 printf(" %02x", _mm256_extract_epi8(n, 0));
491 printf(" %02x", _mm256_extract_epi8(n, 1));
492 printf(" %02x", _mm256_extract_epi8(n, 2));
493 printf(" %02x", _mm256_extract_epi8(n, 3));
494 printf(" %02x", _mm256_extract_epi8(n, 4));
495 printf(" %02x", _mm256_extract_epi8(n, 5));
496 printf(" %02x", _mm256_extract_epi8(n, 6));
497 printf(" %02x", _mm256_extract_epi8(n, 7));
499 printf(" %02x", _mm256_extract_epi8(n, 8));
500 printf(" %02x", _mm256_extract_epi8(n, 9));
501 printf(" %02x", _mm256_extract_epi8(n, 10));
502 printf(" %02x", _mm256_extract_epi8(n, 11));
503 printf(" %02x", _mm256_extract_epi8(n, 12));
504 printf(" %02x", _mm256_extract_epi8(n, 13));
505 printf(" %02x", _mm256_extract_epi8(n, 14));
506 printf(" %02x", _mm256_extract_epi8(n, 15));
508 printf(" %02x", _mm256_extract_epi8(n, 16));
509 printf(" %02x", _mm256_extract_epi8(n, 17));
510 printf(" %02x", _mm256_extract_epi8(n, 18));
511 printf(" %02x", _mm256_extract_epi8(n, 19));
512 printf(" %02x", _mm256_extract_epi8(n, 20));
513 printf(" %02x", _mm256_extract_epi8(n, 21));
514 printf(" %02x", _mm256_extract_epi8(n, 22));
515 printf(" %02x", _mm256_extract_epi8(n, 23));
517 printf(" %02x", _mm256_extract_epi8(n, 24));
518 printf(" %02x", _mm256_extract_epi8(n, 25));
519 printf(" %02x", _mm256_extract_epi8(n, 26));
520 printf(" %02x", _mm256_extract_epi8(n, 27));
521 printf(" %02x", _mm256_extract_epi8(n, 28));
522 printf(" %02x", _mm256_extract_epi8(n, 29));
523 printf(" %02x", _mm256_extract_epi8(n, 30));
524 printf(" %02x", _mm256_extract_epi8(n, 31));
529 #ifndef HAS_MULTIVERSIONING
531 const uint8_t *add_to_frame_fastpath(FrameAllocator::Frame *current_frame, const uint8_t *start, const uint8_t *limit, const char sync_char)
533 // No fast path possible unless we have multiversioning.
537 #else // defined(HAS_MULTIVERSIONING)
539 const uint8_t *add_to_frame_fastpath_core(FrameAllocator::Frame *current_frame, const uint8_t *aligned_start, const uint8_t *limit, const char sync_char);
541 // Does a memcpy and memchr in one to reduce processing time.
542 // Note that the benefit is somewhat limited if your L3 cache is small,
543 // as you'll (unfortunately) spend most of the time loading the data
546 // Complicated cases are left to the slow path; it basically stops copying
547 // up until the first instance of "sync_char" (usually a bit before, actually).
548 // This is fine, since 0x00 bytes shouldn't really show up in normal picture
549 // data, and what we really need this for is the 00 00 ff ff marker in video data.
550 __attribute__((target("default")))
551 const uint8_t *add_to_frame_fastpath(FrameAllocator::Frame *current_frame, const uint8_t *start, const uint8_t *limit, const char sync_char)
553 // No fast path possible unless we have SSE 4.1 or higher.
557 __attribute__((target("sse4.1", "avx2")))
558 const uint8_t *add_to_frame_fastpath(FrameAllocator::Frame *current_frame, const uint8_t *start, const uint8_t *limit, const char sync_char)
560 if (current_frame->data == nullptr ||
561 current_frame->len > current_frame->size ||
565 size_t orig_bytes = limit - start;
566 if (orig_bytes < 128) {
571 // Don't read more bytes than we can write.
572 limit = min(limit, start + (current_frame->size - current_frame->len));
574 // Align end to 32 bytes.
575 limit = (const uint8_t *)(intptr_t(limit) & ~31);
577 if (start >= limit) {
581 // Process [0,31] bytes, such that start gets aligned to 32 bytes.
582 const uint8_t *aligned_start = (const uint8_t *)(intptr_t(start + 31) & ~31);
583 if (aligned_start != start) {
584 const uint8_t *sync_start = (const uint8_t *)memchr(start, sync_char, aligned_start - start);
585 if (sync_start == nullptr) {
586 add_to_frame(current_frame, "", start, aligned_start);
588 add_to_frame(current_frame, "", start, sync_start);
593 // Make the length a multiple of 64.
594 if (current_frame->interleaved) {
595 if (((limit - aligned_start) % 64) != 0) {
598 assert(((limit - aligned_start) % 64) == 0);
601 return add_to_frame_fastpath_core(current_frame, aligned_start, limit, sync_char);
604 __attribute__((target("avx2")))
605 const uint8_t *add_to_frame_fastpath_core(FrameAllocator::Frame *current_frame, const uint8_t *aligned_start, const uint8_t *limit, const char sync_char)
607 const __m256i needle = _mm256_set1_epi8(sync_char);
609 const __restrict __m256i *in = (const __m256i *)aligned_start;
610 if (current_frame->interleaved) {
611 __restrict __m256i *out1 = (__m256i *)(current_frame->data + (current_frame->len + 1) / 2);
612 __restrict __m256i *out2 = (__m256i *)(current_frame->data2 + current_frame->len / 2);
613 if (current_frame->len % 2 == 1) {
617 __m256i shuffle_cw = _mm256_set_epi8(
618 15, 13, 11, 9, 7, 5, 3, 1, 14, 12, 10, 8, 6, 4, 2, 0,
619 15, 13, 11, 9, 7, 5, 3, 1, 14, 12, 10, 8, 6, 4, 2, 0);
620 while (in < (const __m256i *)limit) {
621 // Note: For brevity, comments show lanes as if they were 2x64-bit (they're actually 2x128).
622 __m256i data1 = _mm256_stream_load_si256(in); // AaBbCcDd EeFfGgHh
623 __m256i data2 = _mm256_stream_load_si256(in + 1); // IiJjKkLl MmNnOoPp
625 __m256i found1 = _mm256_cmpeq_epi8(data1, needle);
626 __m256i found2 = _mm256_cmpeq_epi8(data2, needle);
627 __m256i found = _mm256_or_si256(found1, found2);
629 data1 = _mm256_shuffle_epi8(data1, shuffle_cw); // ABCDabcd EFGHefgh
630 data2 = _mm256_shuffle_epi8(data2, shuffle_cw); // IJKLijkl MNOPmnop
632 data1 = _mm256_permute4x64_epi64(data1, 0b11011000); // ABCDEFGH abcdefgh
633 data2 = _mm256_permute4x64_epi64(data2, 0b11011000); // IJKLMNOP ijklmnop
635 __m256i lo = _mm256_permute2x128_si256(data1, data2, 0b00100000);
636 __m256i hi = _mm256_permute2x128_si256(data1, data2, 0b00110001);
638 _mm256_storeu_si256(out1, lo); // Store as early as possible, even if the data isn't used.
639 _mm256_storeu_si256(out2, hi);
641 if (!_mm256_testz_si256(found, found)) {
649 current_frame->len += (uint8_t *)in - aligned_start;
651 __m256i *out = (__m256i *)(current_frame->data + current_frame->len);
652 while (in < (const __m256i *)limit) {
653 __m256i data = _mm256_load_si256(in);
654 _mm256_storeu_si256(out, data); // Store as early as possible, even if the data isn't used.
655 __m256i found = _mm256_cmpeq_epi8(data, needle);
656 if (!_mm256_testz_si256(found, found)) {
663 current_frame->len = (uint8_t *)out - current_frame->data;
666 //printf("managed to fastpath %ld/%ld bytes\n", (const uint8_t *)in - (const uint8_t *)aligned_start, orig_bytes);
667 return (const uint8_t *)in;
670 __attribute__((target("sse4.1")))
671 const uint8_t *add_to_frame_fastpath_core(FrameAllocator::Frame *current_frame, const uint8_t *aligned_start, const uint8_t *limit, const char sync_char)
673 const __m128i needle = _mm_set1_epi8(sync_char);
675 const __m128i *in = (const __m128i *)aligned_start;
676 if (current_frame->interleaved) {
677 __m128i *out1 = (__m128i *)(current_frame->data + (current_frame->len + 1) / 2);
678 __m128i *out2 = (__m128i *)(current_frame->data2 + current_frame->len / 2);
679 if (current_frame->len % 2 == 1) {
683 __m128i mask_lower_byte = _mm_set1_epi16(0x00ff);
684 while (in < (const __m128i *)limit) {
685 __m128i data1 = _mm_load_si128(in);
686 __m128i data2 = _mm_load_si128(in + 1);
687 __m128i data1_lo = _mm_and_si128(data1, mask_lower_byte);
688 __m128i data2_lo = _mm_and_si128(data2, mask_lower_byte);
689 __m128i data1_hi = _mm_srli_epi16(data1, 8);
690 __m128i data2_hi = _mm_srli_epi16(data2, 8);
691 __m128i lo = _mm_packus_epi16(data1_lo, data2_lo);
692 _mm_storeu_si128(out1, lo); // Store as early as possible, even if the data isn't used.
693 __m128i hi = _mm_packus_epi16(data1_hi, data2_hi);
694 _mm_storeu_si128(out2, hi);
695 __m128i found1 = _mm_cmpeq_epi8(data1, needle);
696 __m128i found2 = _mm_cmpeq_epi8(data2, needle);
697 if (!_mm_testz_si128(found1, found1) ||
698 !_mm_testz_si128(found2, found2)) {
706 current_frame->len += (uint8_t *)in - aligned_start;
708 __m128i *out = (__m128i *)(current_frame->data + current_frame->len);
709 while (in < (const __m128i *)limit) {
710 __m128i data = _mm_load_si128(in);
711 _mm_storeu_si128(out, data); // Store as early as possible, even if the data isn't used.
712 __m128i found = _mm_cmpeq_epi8(data, needle);
713 if (!_mm_testz_si128(found, found)) {
720 current_frame->len = (uint8_t *)out - current_frame->data;
723 //printf("managed to fastpath %ld/%ld bytes\n", (const uint8_t *)in - (const uint8_t *)aligned_start, orig_bytes);
724 return (const uint8_t *)in;
727 #endif // defined(HAS_MULTIVERSIONING)
729 void decode_packs(const libusb_transfer *xfr,
730 const char *sync_pattern,
732 FrameAllocator::Frame *current_frame,
733 const char *frame_type_name,
734 function<void(const uint8_t *start)> start_callback)
737 for (int i = 0; i < xfr->num_iso_packets; i++) {
738 const libusb_iso_packet_descriptor *pack = &xfr->iso_packet_desc[i];
740 if (pack->status != LIBUSB_TRANSFER_COMPLETED) {
741 fprintf(stderr, "Error: pack %u/%u status %d\n", i, xfr->num_iso_packets, pack->status);
746 const uint8_t *start = xfr->buffer + offset;
747 const uint8_t *limit = start + pack->actual_length;
748 while (start < limit) { // Usually runs only one iteration.
749 start = add_to_frame_fastpath(current_frame, start, limit, sync_pattern[0]);
750 if (start == limit) break;
751 assert(start < limit);
753 const unsigned char* start_next_frame = (const unsigned char *)memmem(start, limit - start, sync_pattern, sync_length);
754 if (start_next_frame == nullptr) {
755 // add the rest of the buffer
756 add_to_frame(current_frame, frame_type_name, start, limit);
759 add_to_frame(current_frame, frame_type_name, start, start_next_frame);
760 start = start_next_frame + sync_length; // skip sync
761 start_callback(start);
765 dump_pack(xfr, offset, pack);
767 offset += pack->length;
771 void BMUSBCapture::cb_xfr(struct libusb_transfer *xfr)
773 if (xfr->status != LIBUSB_TRANSFER_COMPLETED &&
774 xfr->status != LIBUSB_TRANSFER_NO_DEVICE) {
775 fprintf(stderr, "error: transfer status %d\n", xfr->status);
776 libusb_free_transfer(xfr);
780 assert(xfr->user_data != nullptr);
781 BMUSBCapture *usb = static_cast<BMUSBCapture *>(xfr->user_data);
783 if (xfr->status == LIBUSB_TRANSFER_NO_DEVICE) {
784 if (!usb->disconnected) {
785 fprintf(stderr, "Device went away, stopping transfers.\n");
786 usb->disconnected = true;
787 if (usb->card_disconnected_callback) {
788 usb->card_disconnected_callback();
791 // Don't reschedule the transfer; the loop will stop by itself.
795 if (xfr->type == LIBUSB_TRANSFER_TYPE_ISOCHRONOUS) {
796 if (xfr->endpoint == 0x84) {
797 decode_packs(xfr, "DeckLinkAudioResyncT", 20, &usb->current_audio_frame, "audio", bind(&BMUSBCapture::start_new_audio_block, usb, _1));
799 decode_packs(xfr, "\x00\x00\xff\xff", 4, &usb->current_video_frame, "video", bind(&BMUSBCapture::start_new_frame, usb, _1));
801 // Update the transfer with the new assumed width, if we're in the process of changing formats.
802 change_xfer_size_for_width(usb->assumed_frame_width, xfr);
805 if (xfr->type == LIBUSB_TRANSFER_TYPE_CONTROL) {
806 //const libusb_control_setup *setup = libusb_control_transfer_get_setup(xfr);
807 uint8_t *buf = libusb_control_transfer_get_data(xfr);
809 if (setup->wIndex == 44) {
810 printf("read timer register: 0x%02x%02x%02x%02x\n", buf[0], buf[1], buf[2], buf[3]);
812 printf("read register %2d: 0x%02x%02x%02x%02x\n",
813 setup->wIndex, buf[0], buf[1], buf[2], buf[3]);
816 memcpy(usb->register_file + usb->current_register, buf, 4);
817 usb->current_register = (usb->current_register + 4) % NUM_BMUSB_REGISTERS;
818 if (usb->current_register == 0) {
819 // read through all of them
820 printf("register dump:");
821 for (int i = 0; i < NUM_BMUSB_REGISTERS; i += 4) {
822 printf(" 0x%02x%02x%02x%02x", usb->register_file[i], usb->register_file[i + 1], usb->register_file[i + 2], usb->register_file[i + 3]);
826 libusb_fill_control_setup(xfr->buffer,
827 LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_IN, /*request=*/214, /*value=*/0,
828 /*index=*/usb->current_register, /*length=*/4);
833 printf("length:%u, actual_length:%u\n", xfr->length, xfr->actual_length);
834 for (i = 0; i < xfr->actual_length; i++) {
835 printf("%02x", xfr->buffer[i]);
845 int rc = libusb_submit_transfer(xfr);
847 fprintf(stderr, "error re-submitting URB: %s\n", libusb_error_name(rc));
852 int BMUSBCapture::cb_hotplug(libusb_context *ctx, libusb_device *dev, libusb_hotplug_event event, void *user_data)
854 if (card_connected_callback != nullptr) {
855 libusb_device_descriptor desc;
856 if (libusb_get_device_descriptor(dev, &desc) < 0) {
857 fprintf(stderr, "Error getting device descriptor for hotplugged device %p, killing hotplug\n", dev);
858 libusb_unref_device(dev);
862 if ((desc.idVendor == USB_VENDOR_BLACKMAGIC && desc.idProduct == 0xbd3b) ||
863 (desc.idVendor == USB_VENDOR_BLACKMAGIC && desc.idProduct == 0xbd4f)) {
864 card_connected_callback(dev); // Callback takes ownership.
868 libusb_unref_device(dev);
872 void BMUSBCapture::usb_thread_func()
875 memset(¶m, 0, sizeof(param));
876 param.sched_priority = 1;
877 if (sched_setscheduler(0, SCHED_RR, ¶m) == -1) {
878 printf("couldn't set realtime priority for USB thread: %s\n", strerror(errno));
880 while (!should_quit) {
881 int rc = libusb_handle_events(nullptr);
882 if (rc != LIBUSB_SUCCESS)
889 struct USBCardDevice {
892 libusb_device *device;
895 const char *get_product_name(uint16_t product)
897 if (product == 0xbd3b) {
898 return "Intensity Shuttle";
899 } else if (product == 0xbd4f) {
900 return "UltraStudio SDI";
907 string get_card_description(int id, uint8_t bus, uint8_t port, uint16_t product)
909 const char *product_name = get_product_name(product);
912 snprintf(buf, sizeof(buf), "USB card %d: Bus %03u Device %03u %s",
913 id, bus, port, product_name);
917 vector<USBCardDevice> find_all_cards()
919 libusb_device **devices;
920 ssize_t num_devices = libusb_get_device_list(nullptr, &devices);
921 if (num_devices == -1) {
922 fprintf(stderr, "Error finding USB devices\n");
925 vector<USBCardDevice> found_cards;
926 for (ssize_t i = 0; i < num_devices; ++i) {
927 libusb_device_descriptor desc;
928 if (libusb_get_device_descriptor(devices[i], &desc) < 0) {
929 fprintf(stderr, "Error getting device descriptor for device %d\n", int(i));
933 uint8_t bus = libusb_get_bus_number(devices[i]);
934 uint8_t port = libusb_get_port_number(devices[i]);
936 if (!(desc.idVendor == USB_VENDOR_BLACKMAGIC && desc.idProduct == 0xbd3b) &&
937 !(desc.idVendor == USB_VENDOR_BLACKMAGIC && desc.idProduct == 0xbd4f)) {
938 libusb_unref_device(devices[i]);
942 found_cards.push_back({ desc.idProduct, bus, port, devices[i] });
944 libusb_free_device_list(devices, 0);
946 // Sort the devices to get a consistent ordering.
947 sort(found_cards.begin(), found_cards.end(), [](const USBCardDevice &a, const USBCardDevice &b) {
948 if (a.product != b.product)
949 return a.product < b.product;
951 return a.bus < b.bus;
952 return a.port < b.port;
958 libusb_device_handle *open_card(int card_index, string *description)
960 vector<USBCardDevice> found_cards = find_all_cards();
962 for (size_t i = 0; i < found_cards.size(); ++i) {
963 string tmp_description = get_card_description(i, found_cards[i].bus, found_cards[i].port, found_cards[i].product);
964 fprintf(stderr, "%s\n", tmp_description.c_str());
965 if (i == size_t(card_index)) {
966 *description = tmp_description;
970 if (size_t(card_index) >= found_cards.size()) {
971 fprintf(stderr, "Could not open card %d (only %d found)\n", card_index, int(found_cards.size()));
975 libusb_device_handle *devh;
976 int rc = libusb_open(found_cards[card_index].device, &devh);
978 fprintf(stderr, "Error opening card %d: %s\n", card_index, libusb_error_name(rc));
982 for (size_t i = 0; i < found_cards.size(); ++i) {
983 libusb_unref_device(found_cards[i].device);
989 libusb_device_handle *open_card(unsigned card_index, libusb_device *dev, string *description)
991 uint8_t bus = libusb_get_bus_number(dev);
992 uint8_t port = libusb_get_port_number(dev);
994 libusb_device_descriptor desc;
995 if (libusb_get_device_descriptor(dev, &desc) < 0) {
996 fprintf(stderr, "Error getting device descriptor for device %p\n", dev);
1000 *description = get_card_description(card_index, bus, port, desc.idProduct);
1002 libusb_device_handle *devh;
1003 int rc = libusb_open(dev, &devh);
1005 fprintf(stderr, "Error opening card %p: %s\n", dev, libusb_error_name(rc));
1014 unsigned BMUSBCapture::num_cards()
1016 vector<USBCardDevice> found_cards = find_all_cards();
1017 unsigned ret = found_cards.size();
1018 for (size_t i = 0; i < found_cards.size(); ++i) {
1019 libusb_unref_device(found_cards[i].device);
1024 void BMUSBCapture::configure_card()
1026 if (video_frame_allocator == nullptr) {
1027 owned_video_frame_allocator.reset(new MallocFrameAllocator(FRAME_SIZE, NUM_QUEUED_VIDEO_FRAMES));
1028 set_video_frame_allocator(owned_video_frame_allocator.get());
1030 if (audio_frame_allocator == nullptr) {
1031 owned_audio_frame_allocator.reset(new MallocFrameAllocator(65536, NUM_QUEUED_AUDIO_FRAMES));
1032 set_audio_frame_allocator(owned_audio_frame_allocator.get());
1034 dequeue_thread_should_quit = false;
1035 dequeue_thread = thread(&BMUSBCapture::dequeue_thread_func, this);
1038 struct libusb_transfer *xfr;
1040 rc = libusb_init(nullptr);
1042 fprintf(stderr, "Error initializing libusb: %s\n", libusb_error_name(rc));
1046 if (dev == nullptr) {
1047 devh = open_card(card_index, &description);
1049 devh = open_card(card_index, dev, &description);
1050 libusb_unref_device(dev);
1053 fprintf(stderr, "Error finding USB device\n");
1057 libusb_config_descriptor *config;
1058 rc = libusb_get_config_descriptor(libusb_get_device(devh), /*config_index=*/0, &config);
1060 fprintf(stderr, "Error getting configuration: %s\n", libusb_error_name(rc));
1065 printf("%d interface\n", config->bNumInterfaces);
1066 for (int interface_number = 0; interface_number < config->bNumInterfaces; ++interface_number) {
1067 printf(" interface %d\n", interface_number);
1068 const libusb_interface *interface = &config->interface[interface_number];
1069 for (int altsetting = 0; altsetting < interface->num_altsetting; ++altsetting) {
1070 const libusb_interface_descriptor *interface_desc = &interface->altsetting[altsetting];
1071 printf(" alternate setting %d\n", interface_desc->bAlternateSetting);
1072 for (int endpoint_number = 0; endpoint_number < interface_desc->bNumEndpoints; ++endpoint_number) {
1073 const libusb_endpoint_descriptor *endpoint = &interface_desc->endpoint[endpoint_number];
1074 printf(" endpoint address 0x%02x\n", endpoint->bEndpointAddress);
1080 rc = libusb_set_configuration(devh, /*configuration=*/1);
1082 fprintf(stderr, "Error setting configuration 1: %s\n", libusb_error_name(rc));
1086 rc = libusb_claim_interface(devh, 0);
1088 fprintf(stderr, "Error claiming interface 0: %s\n", libusb_error_name(rc));
1092 // Alternate setting 1 is output, alternate setting 2 is input.
1093 // Card is reset when switching alternates, so the driver uses
1094 // this “double switch” when it wants to reset.
1096 // There's also alternate settings 3 and 4, which seem to be
1097 // like 1 and 2 except they advertise less bandwidth needed.
1098 rc = libusb_set_interface_alt_setting(devh, /*interface=*/0, /*alternate_setting=*/1);
1100 fprintf(stderr, "Error setting alternate 1: %s\n", libusb_error_name(rc));
1103 rc = libusb_set_interface_alt_setting(devh, /*interface=*/0, /*alternate_setting=*/2);
1105 fprintf(stderr, "Error setting alternate 2: %s\n", libusb_error_name(rc));
1109 rc = libusb_set_interface_alt_setting(devh, /*interface=*/0, /*alternate_setting=*/1);
1111 fprintf(stderr, "Error setting alternate 1: %s\n", libusb_error_name(rc));
1117 rc = libusb_claim_interface(devh, 3);
1119 fprintf(stderr, "Error claiming interface 3: %s\n", libusb_error_name(rc));
1125 // 44 is some kind of timer register (first 16 bits count upwards)
1126 // 24 is some sort of watchdog?
1127 // you can seemingly set it to 0x73c60001 and that bit will eventually disappear
1128 // (or will go to 0x73c60010?), also seen 0x73c60100
1129 // 12 also changes all the time, unclear why
1130 // 16 seems to be autodetected mode somehow
1131 // -- this is e00115e0 after reset?
1132 // ed0115e0 after mode change [to output?]
1133 // 2d0015e0 after more mode change [to input]
1134 // ed0115e0 after more mode change
1135 // 2d0015e0 after more mode change
1137 // 390115e0 seems to indicate we have signal
1138 // changes to 200115e0 when resolution changes/we lose signal, driver resets after a while
1140 // 200015e0 on startup
1141 // changes to 250115e0 when we sync to the signal
1143 // so only first 16 bits count, and 0x0100 is a mask for ok/stable signal?
1145 // Bottom 16 bits of this register seem to be firmware version number (possibly not all all of them).
1147 // 28 and 32 seems to be analog audio input levels (one byte for each of the eight channels).
1148 // however, if setting 32 with HDMI embedded audio, it is immediately overwritten back (to 0xe137002a).
1150 // 4, 8, 20 are unclear. seem to be some sort of bitmask, but we can set them to 0 with no apparent effect.
1151 // perhaps some of them are related to analog output?
1153 // 36 can be set to 0 with no apparent effect (all of this tested on both video and audio),
1154 // but the driver sets it to 0x8036802a at some point.
1156 // all of this is on request 214/215. other requests (192, 219,
1157 // 222, 223, 224) are used for firmware upgrade. Probably best to
1158 // stay out of it unless you know what you're doing.
1162 // first byte is 0x39 for a stable 576p60 signal, 0x2d for a stable 720p60 signal, 0x20 for no signal
1165 // 0x01 - stable signal
1166 // 0x04 - deep color
1167 // 0x08 - unknown (audio??)
1171 update_capture_mode();
1179 static const ctrl ctrls[] = {
1180 { LIBUSB_ENDPOINT_IN, 214, 16, 0 },
1181 { LIBUSB_ENDPOINT_IN, 214, 0, 0 },
1183 //{ LIBUSB_ENDPOINT_OUT, 215, 0, 0x80000100 },
1184 //{ LIBUSB_ENDPOINT_OUT, 215, 0, 0x09000000 },
1185 { LIBUSB_ENDPOINT_OUT, 215, 24, 0x73c60001 }, // latch for frame start?
1186 { LIBUSB_ENDPOINT_IN, 214, 24, 0 }, //
1189 for (unsigned req = 0; req < sizeof(ctrls) / sizeof(ctrls[0]); ++req) {
1190 uint32_t flipped = htonl(ctrls[req].data);
1191 static uint8_t value[4];
1192 memcpy(value, &flipped, sizeof(flipped));
1193 int size = sizeof(value);
1194 //if (ctrls[req].request == 215) size = 0;
1195 rc = libusb_control_transfer(devh, LIBUSB_REQUEST_TYPE_VENDOR | ctrls[req].endpoint,
1196 /*request=*/ctrls[req].request, /*value=*/0, /*index=*/ctrls[req].index, value, size, /*timeout=*/0);
1198 fprintf(stderr, "Error on control %d: %s\n", ctrls[req].index, libusb_error_name(rc));
1202 if (ctrls[req].index == 16 && rc == 4) {
1203 printf("Card firmware version: 0x%02x%02x\n", value[2], value[3]);
1207 printf("rc=%d: ep=%d@%d %d -> 0x", rc, ctrls[req].endpoint, ctrls[req].request, ctrls[req].index);
1208 for (int i = 0; i < rc; ++i) {
1209 printf("%02x", value[i]);
1218 static int my_index = 0;
1219 static uint8_t value[4];
1220 int size = sizeof(value);
1221 rc = libusb_control_transfer(devh, LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_IN,
1222 /*request=*/214, /*value=*/0, /*index=*/my_index, value, size, /*timeout=*/0);
1224 fprintf(stderr, "Error on control\n");
1227 printf("rc=%d index=%d: 0x", rc, my_index);
1228 for (int i = 0; i < rc; ++i) {
1229 printf("%02x", value[i]);
1236 // set up an asynchronous transfer of the timer register
1237 static uint8_t cmdbuf[LIBUSB_CONTROL_SETUP_SIZE + 4];
1238 static int completed = 0;
1240 xfr = libusb_alloc_transfer(0);
1241 libusb_fill_control_setup(cmdbuf,
1242 LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_IN, /*request=*/214, /*value=*/0,
1243 /*index=*/44, /*length=*/4);
1244 libusb_fill_control_transfer(xfr, devh, cmdbuf, cb_xfr, &completed, 0);
1245 xfr->user_data = this;
1246 libusb_submit_transfer(xfr);
1248 // set up an asynchronous transfer of register 24
1249 static uint8_t cmdbuf2[LIBUSB_CONTROL_SETUP_SIZE + 4];
1250 static int completed2 = 0;
1252 xfr = libusb_alloc_transfer(0);
1253 libusb_fill_control_setup(cmdbuf2,
1254 LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_IN, /*request=*/214, /*value=*/0,
1255 /*index=*/24, /*length=*/4);
1256 libusb_fill_control_transfer(xfr, devh, cmdbuf2, cb_xfr, &completed2, 0);
1257 xfr->user_data = this;
1258 libusb_submit_transfer(xfr);
1261 // set up an asynchronous transfer of the register dump
1262 static uint8_t cmdbuf3[LIBUSB_CONTROL_SETUP_SIZE + 4];
1263 static int completed3 = 0;
1265 xfr = libusb_alloc_transfer(0);
1266 libusb_fill_control_setup(cmdbuf3,
1267 LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_IN, /*request=*/214, /*value=*/0,
1268 /*index=*/current_register, /*length=*/4);
1269 libusb_fill_control_transfer(xfr, devh, cmdbuf3, cb_xfr, &completed3, 0);
1270 xfr->user_data = this;
1271 //libusb_submit_transfer(xfr);
1273 //audiofp = fopen("audio.raw", "wb");
1275 // set up isochronous transfers for audio and video
1276 for (int e = 3; e <= 4; ++e) {
1277 //int num_transfers = (e == 3) ? 6 : 6;
1278 int num_transfers = 6;
1279 for (int i = 0; i < num_transfers; ++i) {
1281 int num_iso_pack, size;
1283 // Allocate for minimum width (because that will give us the most
1284 // number of packets, so we don't need to reallocated, but we'll
1285 // default to 720p for the first frame.
1286 size = find_xfer_size_for_width(MIN_WIDTH);
1287 num_iso_pack = USB_VIDEO_TRANSFER_SIZE / size;
1288 buf_size = USB_VIDEO_TRANSFER_SIZE;
1292 buf_size = num_iso_pack * size;
1294 int num_bytes = num_iso_pack * size;
1295 assert(size_t(num_bytes) <= buf_size);
1296 #if LIBUSB_API_VERSION >= 0x01000105
1297 uint8_t *buf = libusb_dev_mem_alloc(devh, num_bytes);
1299 uint8_t *buf = nullptr;
1301 if (buf == nullptr) {
1302 fprintf(stderr, "Failed to allocate persistent DMA memory ");
1303 #if LIBUSB_API_VERSION >= 0x01000105
1304 fprintf(stderr, "(probably too old kernel; use 4.6.0 or newer).\n");
1306 fprintf(stderr, "(compiled against too old libusb-1.0).\n");
1308 fprintf(stderr, "Will go slower, and likely fail due to memory fragmentation after a few hours.\n");
1309 buf = new uint8_t[num_bytes];
1312 xfr = libusb_alloc_transfer(num_iso_pack);
1314 fprintf(stderr, "oom\n");
1318 int ep = LIBUSB_ENDPOINT_IN | e;
1319 libusb_fill_iso_transfer(xfr, devh, ep, buf, buf_size,
1320 num_iso_pack, cb_xfr, nullptr, 0);
1321 libusb_set_iso_packet_lengths(xfr, size);
1322 xfr->user_data = this;
1325 change_xfer_size_for_width(assumed_frame_width, xfr);
1328 iso_xfrs.push_back(xfr);
1333 void BMUSBCapture::start_bm_capture()
1336 for (libusb_transfer *xfr : iso_xfrs) {
1337 int rc = libusb_submit_transfer(xfr);
1340 //printf("num_bytes=%d\n", num_bytes);
1341 fprintf(stderr, "Error submitting iso to endpoint 0x%02x, number %d: %s\n",
1342 xfr->endpoint, i, libusb_error_name(rc));
1349 libusb_release_interface(devh, 0);
1353 libusb_exit(nullptr);
1358 void BMUSBCapture::stop_dequeue_thread()
1360 dequeue_thread_should_quit = true;
1361 queues_not_empty.notify_all();
1362 dequeue_thread.join();
1365 void BMUSBCapture::start_bm_thread()
1367 // Devices leaving are discovered by seeing the isochronous packets
1368 // coming back with errors, so only care about devices joining.
1369 if (card_connected_callback != nullptr) {
1370 if (libusb_hotplug_register_callback(
1371 nullptr, LIBUSB_HOTPLUG_EVENT_DEVICE_ARRIVED, hotplug_existing_devices ? LIBUSB_HOTPLUG_ENUMERATE : LIBUSB_HOTPLUG_NO_FLAGS,
1372 USB_VENDOR_BLACKMAGIC, LIBUSB_HOTPLUG_MATCH_ANY, LIBUSB_HOTPLUG_MATCH_ANY,
1373 &BMUSBCapture::cb_hotplug, nullptr, nullptr) < 0) {
1374 fprintf(stderr, "libusb_hotplug_register_callback() failed\n");
1379 should_quit = false;
1380 usb_thread = thread(&BMUSBCapture::usb_thread_func);
1383 void BMUSBCapture::stop_bm_thread()
1389 map<uint32_t, VideoMode> BMUSBCapture::get_available_video_modes() const
1391 // The USB3 cards autodetect, and seem to have no provision for forcing modes.
1392 VideoMode auto_mode;
1393 auto_mode.name = "Autodetect";
1394 auto_mode.autodetect = true;
1395 return {{ 0, auto_mode }};
1398 uint32_t BMUSBCapture::get_current_video_mode() const
1400 return 0; // Matches get_available_video_modes().
1403 void BMUSBCapture::set_video_mode(uint32_t video_mode_id)
1405 assert(video_mode_id == 0); // Matches get_available_video_modes().
1408 std::map<uint32_t, std::string> BMUSBCapture::get_available_video_inputs() const
1411 { 0x00000000, "HDMI/SDI" },
1412 { 0x02000000, "Component" },
1413 { 0x04000000, "Composite" },
1414 { 0x06000000, "S-video" }
1418 void BMUSBCapture::set_video_input(uint32_t video_input_id)
1420 assert((video_input_id & ~0x06000000) == 0);
1421 current_video_input = video_input_id;
1422 update_capture_mode();
1425 std::map<uint32_t, std::string> BMUSBCapture::get_available_audio_inputs() const
1428 { 0x00000000, "Embedded" },
1429 { 0x10000000, "Analog" }
1433 void BMUSBCapture::set_audio_input(uint32_t audio_input_id)
1435 assert((audio_input_id & ~0x10000000) == 0);
1436 current_audio_input = audio_input_id;
1437 update_capture_mode();
1440 void BMUSBCapture::update_capture_mode()
1442 // clearing the 0x20000000 bit seems to activate 10-bit capture (v210).
1443 // clearing the 0x08000000 bit seems to change the capture format (other source?)
1444 uint32_t mode = htonl(0x29000000 | current_video_input | current_audio_input);
1446 int rc = libusb_control_transfer(devh, LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_OUT,
1447 /*request=*/215, /*value=*/0, /*index=*/0, (unsigned char *)&mode, sizeof(mode), /*timeout=*/0);
1449 fprintf(stderr, "Error on setting mode: %s\n", libusb_error_name(rc));
1454 } // namespace bmusb