1 \input texinfo @c -*- texinfo -*-
3 @settitle FFmpeg Documentation
6 @center @titlefont{FFmpeg Documentation}
13 FFmpeg is a very fast video and audio converter. It can also grab from
14 a live audio/video source.
16 The command line interface is designed to be intuitive, in the sense
17 that FFmpeg tries to figure out all parameters that can possibly be
18 derived automatically. You usually only have to specify the target
21 FFmpeg can also convert from any sample rate to any other, and resize
22 video on the fly with a high quality polyphase filter.
27 @section Video and Audio grabbing
29 FFmpeg can use a video4linux compatible video source and any Open Sound
36 Note that you must activate the right video source and channel before
37 launching FFmpeg with any TV viewer such as xawtv
38 (@url{http://bytesex.org/xawtv/}) by Gerd Knorr. You also
39 have to set the audio recording levels correctly with a
42 @section Video and Audio file format conversion
44 * FFmpeg can use any supported file format and protocol as input:
48 * You can use YUV files as input:
51 ffmpeg -i /tmp/test%d.Y /tmp/out.mpg
54 It will use the files:
56 /tmp/test0.Y, /tmp/test0.U, /tmp/test0.V,
57 /tmp/test1.Y, /tmp/test1.U, /tmp/test1.V, etc...
60 The Y files use twice the resolution of the U and V files. They are
61 raw files, without header. They can be generated by all decent video
62 decoders. You must specify the size of the image with the @option{-s} option
63 if FFmpeg cannot guess it.
65 * You can input from a raw YUV420P file:
68 ffmpeg -i /tmp/test.yuv /tmp/out.avi
71 test.yuv is a file containing raw YUV planar data. Each frame is composed
72 of the Y plane followed by the U and V planes at half vertical and
73 horizontal resolution.
75 * You can output to a raw YUV420P file:
78 ffmpeg -i mydivx.avi hugefile.yuv
81 * You can set several input files and output files:
84 ffmpeg -i /tmp/a.wav -s 640x480 -i /tmp/a.yuv /tmp/a.mpg
87 Converts the audio file a.wav and the raw YUV video file a.yuv
90 * You can also do audio and video conversions at the same time:
93 ffmpeg -i /tmp/a.wav -ar 22050 /tmp/a.mp2
96 Converts a.wav to MPEG audio at 22050Hz sample rate.
98 * You can encode to several formats at the same time and define a
99 mapping from input stream to output streams:
102 ffmpeg -i /tmp/a.wav -ab 64 /tmp/a.mp2 -ab 128 /tmp/b.mp2 -map 0:0 -map 0:0
105 Converts a.wav to a.mp2 at 64 kbits and to b.mp2 at 128 kbits. '-map
106 file:index' specifies which input stream is used for each output
107 stream, in the order of the definition of output streams.
109 * You can transcode decrypted VOBs
112 ffmpeg -i snatch_1.vob -f avi -vcodec mpeg4 -b 800k -g 300 -bf 2 -acodec mp3 -ab 128 snatch.avi
115 This is a typical DVD ripping example; the input is a VOB file, the
116 output an AVI file with MPEG-4 video and MP3 audio. Note that in this
117 command we use B-frames so the MPEG-4 stream is DivX5 compatible, and
118 GOP size is 300 which means one intra frame every 10 seconds for 29.97fps
119 input video. Furthermore, the audio stream is MP3-encoded so you need
120 to enable LAME support by passing @code{--enable-mp3lame} to configure.
121 The mapping is particularly useful for DVD transcoding
122 to get the desired audio language.
124 NOTE: To see the supported input formats, use @code{ffmpeg -formats}.
131 The generic syntax is:
134 @c man begin SYNOPSIS
135 ffmpeg [[infile options][@option{-i} @var{infile}]]... @{[outfile options] @var{outfile}@}...
138 @c man begin DESCRIPTION
139 If no input file is given, audio/video grabbing is done.
141 As a general rule, options are applied to the next specified
142 file. For example, if you give the @option{-b 64k} option, it sets the video
143 bitrate of the next file. The format option may be needed for raw input
146 By default, FFmpeg tries to convert as losslessly as possible: It
147 uses the same audio and video parameters for the outputs as the one
148 specified for the inputs.
152 @section Main options
162 Show available formats, codecs, protocols, ...
171 Overwrite output files.
174 Set the recording time in seconds.
175 @code{hh:mm:ss[.xxx]} syntax is also supported.
178 Seek to given time position in seconds.
179 @code{hh:mm:ss[.xxx]} syntax is also supported.
187 @item -copyright string
190 @item -comment string
200 Specify target file type ("vcd", "svcd", "dvd", "dv", "pal-vcd",
201 "ntsc-svcd", ... ). All the format options (bitrate, codecs,
202 buffer sizes) are then set automatically. You can just type:
205 ffmpeg -i myfile.avi -target vcd /tmp/vcd.mpg
208 Nevertheless you can specify additional options as long as you know
209 they do not conflict with the standard, as in:
212 ffmpeg -i myfile.avi -target vcd -bf 2 /tmp/vcd.mpg
215 @item -itsoffset offset
216 Set the input time offset in seconds.
217 @code{[-]hh:mm:ss[.xxx]} syntax is also supported.
218 This option affects all the input files that follow it.
219 The offset is added to the timestamps of the input files.
220 Specifying a positive offset means that the corresponding
221 streams are delayed by 'offset' seconds.
225 @section Video Options
229 Set the video bitrate in bit/s (default = 200 kb/s).
231 Set frame rate (default = 25).
233 Set frame size. The format is @samp{wxh} (default = 160x128).
234 The following abbreviations are recognized:
247 Set aspect ratio (4:3, 16:9 or 1.3333, 1.7777).
249 Set top crop band size (in pixels).
250 @item -cropbottom size
251 Set bottom crop band size (in pixels).
253 Set left crop band size (in pixels).
254 @item -cropright size
255 Set right crop band size (in pixels).
257 Set top pad band size (in pixels).
258 @item -padbottom size
259 Set bottom pad band size (in pixels).
261 Set left pad band size (in pixels).
263 Set right pad band size (in pixels).
264 @item -padcolor (hex color)
265 Set color of padded bands. The value for padcolor is expressed
266 as a six digit hexadecimal number where the first two digits
267 represent red, the middle two digits green and last two digits
268 blue (default = 000000 (black)).
270 Disable video recording.
272 Set video bitrate tolerance (in kbit/s).
273 @item -maxrate bitrate
274 Set max video bitrate tolerance (in kbit/s).
275 @item -minrate bitrate
276 Set min video bitrate tolerance (in kbit/s).
278 Set rate control buffer size (in kbit).
280 Force video codec to @var{codec}. Use the @code{copy} special value to
281 tell that the raw codec data must be copied as is.
283 Use same video quality as source (implies VBR).
286 Select the pass number (1 or 2). It is useful to do two pass
287 encoding. The statistics of the video are recorded in the first
288 pass and the video is generated at the exact requested bitrate
291 @item -passlogfile file
292 Set two pass logfile name to @var{file}.
296 @section Advanced Video Options
300 Set the group of pictures size.
302 Use only intra frames.
304 Use fixed video quantiser scale (VBR).
306 minimum video quantiser scale (VBR)
308 maximum video quantiser scale (VBR)
310 maximum difference between the quantiser scales (VBR)
312 video quantiser scale blur (VBR)
313 @item -qcomp compression
314 video quantiser scale compression (VBR)
316 @item -rc_init_cplx complexity
317 initial complexity for single pass encoding
318 @item -b_qfactor factor
319 qp factor between P- and B-frames
320 @item -i_qfactor factor
321 qp factor between P- and I-frames
322 @item -b_qoffset offset
323 qp offset between P- and B-frames
324 @item -i_qoffset offset
325 qp offset between P- and I-frames
326 @item -rc_eq equation
327 Set rate control equation (@pxref{FFmpeg formula
328 evaluator}) (default = @code{tex^qComp}).
329 @item -rc_override override
330 rate control override for specific intervals
332 Set motion estimation method to @var{method}.
333 Available methods are (from lowest to best quality):
336 Try just the (0, 0) vector.
343 exhaustive search (slow and marginally better than epzs)
347 Set DCT algorithm to @var{algo}. Available values are:
350 FF_DCT_AUTO (default)
363 @item -idct_algo algo
364 Set IDCT algorithm to @var{algo}. Available values are:
367 FF_IDCT_AUTO (default)
391 Set error resilience to @var{n}.
394 FF_ER_CAREFUL (default)
400 FF_ER_VERY_AGGRESSIVE
404 Set error concealment to @var{bit_mask}. @var{bit_mask} is a bit mask of
405 the following values:
408 FF_EC_GUESS_MVS (default = enabled)
410 FF_EC_DEBLOCK (default = enabled)
414 Use 'frames' B-frames (supported for MPEG-1, MPEG-2 and MPEG-4).
419 FF_MB_DECISION_SIMPLE: Use mb_cmp (cannot change it yet in FFmpeg).
421 FF_MB_DECISION_BITS: Choose the one which needs the fewest bits.
423 FF_MB_DECISION_RD: rate distortion
427 Use four motion vector by macroblock (MPEG-4 only).
429 Use data partitioning (MPEG-4 only).
431 Work around encoder bugs that are not auto-detected.
432 @item -strict strictness
433 How strictly to follow the standards.
435 Enable Advanced intra coding (h263+).
437 Enable Unlimited Motion Vector (h263+)
440 Deinterlace pictures.
442 Force interlacing support in encoder (MPEG-2 and MPEG-4 only).
443 Use this option if your input file is interlaced and you want
444 to keep the interlaced format for minimum losses.
445 The alternative is to deinterlace the input stream with
446 @option{-deinterlace}, but deinterlacing introduces losses.
448 Calculate PSNR of compressed frames.
450 Dump video coding statistics to @file{vstats_HHMMSS.log}.
452 Insert video processing @var{module}. @var{module} contains the module
453 name and its parameters separated by spaces.
456 @section Audio Options
460 Set the audio sampling frequency (default = 44100 Hz).
462 Set the audio bitrate in kbit/s (default = 64).
464 Set the number of audio channels (default = 1).
466 Disable audio recording.
468 Force audio codec to @var{codec}. Use the @code{copy} special value to
469 specify that the raw codec data must be copied as is.
472 @section Audio/Video grab options
476 sEt video grab device (e.g. @file{/dev/video0}).
478 Set video grab channel (DV1394 only).
479 @item -tvstd standard
480 Set television standard (NTSC, PAL (SECAM)).
484 Set audio device (e.g. @file{/dev/dsp}).
487 @section Advanced options
490 @item -map input stream id[:input stream id]
491 Set stream mapping from input streams to output streams.
492 Just enumerate the input streams in the order you want them in the output.
493 [input stream id] sets the (input) stream to sync against.
495 Print specific debug info.
497 Add timings for benchmarking.
499 Dump each input packet.
501 Only use bit exact algorithms (for codec testing).
503 Set packet size in bits.
505 Read input at native frame rate. Mainly used to simulate a grab device.
507 Loop over the input stream. Currently it works only for image
508 streams. This option is used for automatic FFserver testing.
509 @item -loop_output number_of_times
510 Repeatedly loop output for formats that support looping such as animated GIF
511 (0 will loop the output infinitely).
512 @item -vsync parameter
513 Video sync method. Video will be stretched/squeezed to match the timestamps,
514 it is done by duplicating and dropping frames. With -map you can select from
515 which stream the timestamps should be taken. You can leave either video or
516 audio unchanged and sync the remaining stream(s) to the unchanged one.
517 @item -async samples_per_second
518 Audio sync method. "Stretches/squeezes" the audio stream to match the timestamps,
519 the parameter is the maximum samples per second by which the audio is changed.
520 -async 1 is a special case where only the start of the audio stream is corrected
521 without any later correction.
524 @node FFmpeg formula evaluator
525 @section FFmpeg formula evaluator
527 When evaluating a rate control string, FFmpeg uses an internal formula
530 The following binary operators are available: @code{+}, @code{-},
531 @code{*}, @code{/}, @code{^}.
533 The following unary operators are available: @code{+}, @code{-},
536 The following functions are available:
558 The following constants are available:
587 @settitle FFmpeg video converter
590 ffserver(1), ffplay(1) and the HTML documentation of @file{ffmpeg}.
601 The filename can be @file{-} to read from standard input or to write
604 FFmpeg also handles many protocols specified with an URL syntax.
606 Use 'ffmpeg -formats' to see a list of the supported protocols.
608 The protocol @code{http:} is currently used only to communicate with
609 FFserver (see the FFserver documentation). When FFmpeg will be a
610 video player it will also be used for streaming :-)
615 @item For streaming at very low bitrate application, use a low frame rate
616 and a small GOP size. This is especially true for RealVideo where
617 the Linux player does not seem to be very fast, so it can miss
618 frames. An example is:
621 ffmpeg -g 3 -r 3 -t 10 -b 50k -s qcif -f rv10 /tmp/b.rm
624 @item The parameter 'q' which is displayed while encoding is the current
625 quantizer. The value 1 indicates that a very good quality could
626 be achieved. The value 31 indicates the worst quality. If q=31 appears
627 too often, it means that the encoder cannot compress enough to meet
628 your bitrate. You must either increase the bitrate, decrease the
629 frame rate or decrease the frame size.
631 @item If your computer is not fast enough, you can speed up the
632 compression at the expense of the compression ratio. You can use
633 '-me zero' to speed up motion estimation, and '-intra' to disable
634 motion estimation completely (you have only I-frames, which means it
635 is about as good as JPEG compression).
637 @item To have very low audio bitrates, reduce the sampling frequency
638 (down to 22050 kHz for MPEG audio, 22050 or 11025 for AC3).
640 @item To have a constant quality (but a variable bitrate), use the option
641 '-qscale n' when 'n' is between 1 (excellent quality) and 31 (worst
644 @item When converting video files, you can use the '-sameq' option which
645 uses the same quality factor in the encoder as in the decoder.
646 It allows almost lossless encoding.
650 @chapter Supported File Formats and Codecs
652 You can use the @code{-formats} option to have an exhaustive list.
654 @section File Formats
656 FFmpeg supports the following file formats through the @code{libavformat}
659 @multitable @columnfractions .4 .1 .1 .4
660 @item Supported File Format @tab Encoding @tab Decoding @tab Comments
661 @item MPEG audio @tab X @tab X
662 @item MPEG-1 systems @tab X @tab X
663 @tab muxed audio and video
664 @item MPEG-2 PS @tab X @tab X
665 @tab also known as @code{VOB} file
666 @item MPEG-2 TS @tab @tab X
667 @tab also known as DVB Transport Stream
668 @item ASF@tab X @tab X
669 @item AVI@tab X @tab X
670 @item WAV@tab X @tab X
671 @item Macromedia Flash@tab X @tab X
672 @tab Only embedded audio is decoded.
673 @item FLV @tab X @tab X
674 @tab Macromedia Flash video files
675 @item Real Audio and Video @tab X @tab X
676 @item Raw AC3 @tab X @tab X
677 @item Raw MJPEG @tab X @tab X
678 @item Raw MPEG video @tab X @tab X
679 @item Raw PCM8/16 bits, mulaw/Alaw@tab X @tab X
680 @item Raw CRI ADX audio @tab X @tab X
681 @item Raw Shorten audio @tab @tab X
682 @item SUN AU format @tab X @tab X
683 @item NUT @tab X @tab X @tab NUT Open Container Format
684 @item QuickTime @tab X @tab X
685 @item MPEG-4 @tab X @tab X
686 @tab MPEG-4 is a variant of QuickTime.
687 @item Raw MPEG4 video @tab X @tab X
688 @item DV @tab X @tab X
689 @item 4xm @tab @tab X
690 @tab 4X Technologies format, used in some games.
691 @item Playstation STR @tab @tab X
692 @item Id RoQ @tab @tab X
693 @tab Used in Quake III, Jedi Knight 2, other computer games.
694 @item Interplay MVE @tab @tab X
695 @tab Format used in various Interplay computer games.
696 @item WC3 Movie @tab @tab X
697 @tab Multimedia format used in Origin's Wing Commander III computer game.
698 @item Sega FILM/CPK @tab @tab X
699 @tab Used in many Sega Saturn console games.
700 @item Westwood Studios VQA/AUD @tab @tab X
701 @tab Multimedia formats used in Westwood Studios games.
702 @item Id Cinematic (.cin) @tab @tab X
703 @tab Used in Quake II.
704 @item FLIC format @tab @tab X
706 @item Sierra VMD @tab @tab X
707 @tab Used in Sierra CD-ROM games.
708 @item Sierra Online @tab @tab X
709 @tab .sol files used in Sierra Online games.
710 @item Matroska @tab @tab X
711 @item Electronic Arts Multimedia @tab @tab X
712 @tab Used in various EA games; files have extensions like WVE and UV2.
713 @item Nullsoft Video (NSV) format @tab @tab X
714 @item ADTS AAC audio @tab X @tab X
715 @item Creative VOC @tab X @tab X @tab Created for the Sound Blaster Pro.
716 @item American Laser Games MM @tab @tab X
717 @tab Multimedia format used in games like Mad Dog McCree
718 @item AVS @tab @tab X
719 @tab Multimedia format used by the Creature Shock game.
720 @item Smacker @tab @tab X
721 @tab Multimedia format used by many games.
722 @item GXF @tab @tab X
725 @code{X} means that encoding (resp. decoding) is supported.
727 @section Image Formats
729 FFmpeg can read and write images for each frame of a video sequence. The
730 following image formats are supported:
732 @multitable @columnfractions .4 .1 .1 .4
733 @item Supported Image Format @tab Encoding @tab Decoding @tab Comments
734 @item PGM, PPM @tab X @tab X
735 @item PAM @tab X @tab X @tab PAM is a PNM extension with alpha support.
736 @item PGMYUV @tab X @tab X @tab PGM with U and V components in YUV 4:2:0
737 @item JPEG @tab X @tab X @tab Progressive JPEG is not supported.
738 @item .Y.U.V @tab X @tab X @tab one raw file per component
739 @item animated GIF @tab X @tab X @tab Only uncompressed GIFs are generated.
740 @item PNG @tab X @tab X @tab 2 bit and 4 bit/pixel not supported yet.
741 @item SGI @tab X @tab X @tab SGI RGB image format
744 @code{X} means that encoding (resp. decoding) is supported.
746 @section Video Codecs
748 @multitable @columnfractions .4 .1 .1 .4
749 @item Supported Codec @tab Encoding @tab Decoding @tab Comments
750 @item MPEG-1 video @tab X @tab X
751 @item MPEG-2 video @tab X @tab X
752 @item MPEG-4 @tab X @tab X @tab also known as DivX4/5
753 @item MSMPEG4 V1 @tab X @tab X
754 @item MSMPEG4 V2 @tab X @tab X
755 @item MSMPEG4 V3 @tab X @tab X @tab also known as DivX3
756 @item WMV7 @tab X @tab X
757 @item WMV8 @tab X @tab X @tab not completely working
758 @item H.261 @tab X @tab X
759 @item H.263(+) @tab X @tab X @tab also known as RealVideo 1.0
760 @item H.264 @tab @tab X
761 @item RealVideo 1.0 @tab X @tab X
762 @item RealVideo 2.0 @tab X @tab X
763 @item MJPEG @tab X @tab X
764 @item lossless MJPEG @tab X @tab X
765 @item JPEG-LS @tab X @tab X @tab fourcc: MJLS, lossless and near-lossless is supported
766 @item Apple MJPEG-B @tab @tab X
767 @item Sunplus MJPEG @tab @tab X @tab fourcc: SP5X
768 @item DV @tab X @tab X
769 @item HuffYUV @tab X @tab X
770 @item FFmpeg Video 1 @tab X @tab X @tab experimental lossless codec (fourcc: FFV1)
771 @item FFmpeg Snow @tab X @tab X @tab experimental wavelet codec (fourcc: SNOW)
772 @item Asus v1 @tab X @tab X @tab fourcc: ASV1
773 @item Asus v2 @tab X @tab X @tab fourcc: ASV2
774 @item Creative YUV @tab @tab X @tab fourcc: CYUV
775 @item Sorenson Video 1 @tab X @tab X @tab fourcc: SVQ1
776 @item Sorenson Video 3 @tab @tab X @tab fourcc: SVQ3
777 @item On2 VP3 @tab @tab X @tab still experimental
778 @item On2 VP5 @tab @tab X @tab fourcc: VP50
779 @item On2 VP6 @tab @tab X @tab fourcc: VP62
780 @item Theora @tab @tab X @tab still experimental
781 @item Intel Indeo 3 @tab @tab X
782 @item FLV @tab X @tab X @tab Sorenson H.263 used in Flash
783 @item Flash Screen Video @tab @tab X @tab fourcc: FSV1
784 @item ATI VCR1 @tab @tab X @tab fourcc: VCR1
785 @item ATI VCR2 @tab @tab X @tab fourcc: VCR2
786 @item Cirrus Logic AccuPak @tab @tab X @tab fourcc: CLJR
787 @item 4X Video @tab @tab X @tab Used in certain computer games.
788 @item Sony Playstation MDEC @tab @tab X
789 @item Id RoQ @tab @tab X @tab Used in Quake III, Jedi Knight 2, other computer games.
790 @item Xan/WC3 @tab @tab X @tab Used in Wing Commander III .MVE files.
791 @item Interplay Video @tab @tab X @tab Used in Interplay .MVE files.
792 @item Apple Animation @tab @tab X @tab fourcc: 'rle '
793 @item Apple Graphics @tab @tab X @tab fourcc: 'smc '
794 @item Apple Video @tab @tab X @tab fourcc: rpza
795 @item Apple QuickDraw @tab @tab X @tab fourcc: qdrw
796 @item Cinepak @tab @tab X
797 @item Microsoft RLE @tab @tab X
798 @item Microsoft Video-1 @tab @tab X
799 @item Westwood VQA @tab @tab X
800 @item Id Cinematic Video @tab @tab X @tab Used in Quake II.
801 @item Planar RGB @tab @tab X @tab fourcc: 8BPS
802 @item FLIC video @tab @tab X
803 @item Duck TrueMotion v1 @tab @tab X @tab fourcc: DUCK
804 @item Duck TrueMotion v2 @tab @tab X @tab fourcc: TM20
805 @item VMD Video @tab @tab X @tab Used in Sierra VMD files.
806 @item MSZH @tab @tab X @tab Part of LCL
807 @item ZLIB @tab X @tab X @tab Part of LCL, encoder experimental
808 @item TechSmith Camtasia @tab @tab X @tab fourcc: TSCC
809 @item IBM Ultimotion @tab @tab X @tab fourcc: ULTI
810 @item Miro VideoXL @tab @tab X @tab fourcc: VIXL
811 @item QPEG @tab @tab X @tab fourccs: QPEG, Q1.0, Q1.1
812 @item LOCO @tab @tab X @tab
813 @item Winnov WNV1 @tab @tab X @tab
814 @item Autodesk Animator Studio Codec @tab @tab X @tab fourcc: AASC
815 @item Fraps FPS1 @tab @tab X @tab
816 @item CamStudio @tab @tab X @tab fourcc: CSCD
817 @item American Laser Games Video @tab @tab X @tab Used in games like Mad Dog McCree
818 @item ZMBV @tab @tab X @tab
819 @item AVS Video @tab @tab X @tab Video encoding used by the Creature Shock game.
820 @item Smacker Video @tab @tab X @tab Video encoding used in Smacker.
821 @item RTjpeg @tab @tab X @tab Video encoding used in NuppelVideo files.
822 @item KMVC @tab @tab X @tab Codec used in Worms games.
823 @item VMware Video @tab @tab X @tab Codec used in videos captured by VMware.
826 @code{X} means that encoding (resp. decoding) is supported.
828 See @url{http://mplayerhq.hu/~michael/codec-features.html} to
829 get a precise comparison of the FFmpeg MPEG-4 codec compared to
830 other implementations.
832 @section Audio Codecs
834 @multitable @columnfractions .4 .1 .1 .1 .7
835 @item Supported Codec @tab Encoding @tab Decoding @tab Comments
836 @item MPEG audio layer 2 @tab IX @tab IX
837 @item MPEG audio layer 1/3 @tab IX @tab IX
838 @tab MP3 encoding is supported through the external library LAME.
839 @item AC3 @tab IX @tab IX
840 @tab liba52 is used internally for decoding.
841 @item Vorbis @tab X @tab X
842 @tab Supported through the external library libvorbis.
843 @item WMA V1/V2 @tab @tab X
844 @item AAC @tab X @tab X
845 @tab Supported through the external library libfaac/libfaad.
846 @item Microsoft ADPCM @tab X @tab X
847 @item MS IMA ADPCM @tab X @tab X
848 @item QT IMA ADPCM @tab @tab X
849 @item 4X IMA ADPCM @tab @tab X
850 @item G.726 ADPCM @tab X @tab X
851 @item Duck DK3 IMA ADPCM @tab @tab X
852 @tab Used in some Sega Saturn console games.
853 @item Duck DK4 IMA ADPCM @tab @tab X
854 @tab Used in some Sega Saturn console games.
855 @item Westwood Studios IMA ADPCM @tab @tab X
856 @tab Used in Westwood Studios games like Command and Conquer.
857 @item SMJPEG IMA ADPCM @tab @tab X
858 @tab Used in certain Loki game ports.
859 @item CD-ROM XA ADPCM @tab @tab X
860 @item CRI ADX ADPCM @tab X @tab X
861 @tab Used in Sega Dreamcast games.
862 @item Electronic Arts ADPCM @tab @tab X
863 @tab Used in various EA titles.
864 @item Creative ADPCM @tab @tab X
865 @tab 16 -> 4, 8 -> 4, 8 -> 3, 8 -> 2
866 @item RA144 @tab @tab X
867 @tab Real 14400 bit/s codec
868 @item RA288 @tab @tab X
869 @tab Real 28800 bit/s codec
870 @item RADnet @tab X @tab IX
871 @tab Real low bitrate AC3 codec, liba52 is used for decoding.
872 @item AMR-NB @tab X @tab X
873 @tab Supported through an external library.
874 @item AMR-WB @tab X @tab X
875 @tab Supported through an external library.
876 @item DV audio @tab @tab X
877 @item Id RoQ DPCM @tab @tab X
878 @tab Used in Quake III, Jedi Knight 2, other computer games.
879 @item Interplay MVE DPCM @tab @tab X
880 @tab Used in various Interplay computer games.
881 @item Xan DPCM @tab @tab X
882 @tab Used in Origin's Wing Commander IV AVI files.
883 @item Sierra Online DPCM @tab @tab X
884 @tab Used in Sierra Online game audio files.
885 @item Apple MACE 3 @tab @tab X
886 @item Apple MACE 6 @tab @tab X
887 @item FLAC lossless audio @tab @tab X
888 @item Shorten lossless audio @tab @tab X
889 @item Apple lossless audio @tab @tab X
890 @tab QuickTime fourcc 'alac'
891 @item FFmpeg Sonic @tab X @tab X
892 @tab experimental lossy/lossless codec
893 @item Qdesign QDM2 @tab @tab X
894 @tab there are still some distortions
895 @item Real COOK @tab @tab X
896 @tab All versions except 5.1 are supported
897 @item DSP Group TrueSpeech @tab @tab X
898 @item True Audio (TTA) @tab @tab X
899 @item Smacker Audio @tab @tab X
902 @code{X} means that encoding (resp. decoding) is supported.
904 @code{I} means that an integer-only version is available, too (ensures high
905 performance on systems without hardware floating point support).
907 @chapter Platform Specific information
911 FFmpeg should be compiled with at least GCC 2.95.3. GCC 3.2 is the
912 preferred compiler now for FFmpeg. All future optimizations will depend on
913 features only found in GCC 3.2.
917 BSD make will not build FFmpeg, you need to install and use GNU Make
922 @subsection Native Windows compilation
925 @item Install the current versions of MSYS and MinGW from
926 @url{http://www.mingw.org/}. You can find detailed installation
927 instructions in the download section and the FAQ.
929 @item If you want to test the FFplay, also download
930 the MinGW development library of SDL 1.2.x
931 (@file{SDL-devel-1.2.x-mingw32.tar.gz}) from
932 @url{http://www.libsdl.org}. Unpack it in a temporary directory, and
933 unpack the archive @file{i386-mingw32msvc.tar.gz} in the MinGW tool
934 directory. Edit the @file{sdl-config} script so that it gives the
935 correct SDL directory when invoked.
937 @item Extract the current version of FFmpeg.
939 @item Start the MSYS shell (file @file{msys.bat}).
941 @item Change to the FFmpeg directory and follow
942 the instructions of how to compile FFmpeg (file
943 @file{INSTALL}). Usually, launching @file{./configure} and @file{make}
944 suffices. If you have problems using SDL, verify that
945 @file{sdl-config} can be launched from the MSYS command line.
947 @item You can install FFmpeg in @file{Program Files/FFmpeg} by typing
948 @file{make install}. Don't forget to copy @file{SDL.dll} to the place
949 you launch @file{ffplay} from.
956 @item The target @file{make wininstaller} can be used to create a
957 Nullsoft based Windows installer for FFmpeg and FFplay. @file{SDL.dll}
958 must be copied to the FFmpeg directory in order to build the
961 @item By using @code{./configure --enable-shared} when configuring FFmpeg,
962 you can build @file{avcodec.dll} and @file{avformat.dll}. With
963 @code{make install} you install the FFmpeg DLLs and the associated
964 headers in @file{Program Files/FFmpeg}.
966 @item Visual C++ compatibility: If you used @code{./configure --enable-shared}
967 when configuring FFmpeg, FFmpeg tries to use the Microsoft Visual
968 C++ @code{lib} tool to build @code{avcodec.lib} and
969 @code{avformat.lib}. With these libraries you can link your Visual C++
970 code directly with the FFmpeg DLLs (see below).
974 @subsection Visual C++ compatibility
976 FFmpeg will not compile under Visual C++ -- and it has too many
977 dependencies on the GCC compiler to make a port viable. However,
978 if you want to use the FFmpeg libraries in your own applications,
979 you can still compile those applications using Visual C++. An
980 important restriction to this is that you have to use the
981 dynamically linked versions of the FFmpeg libraries (i.e. the
982 DLLs), and you have to make sure that Visual-C++-compatible
983 import libraries are created during the FFmpeg build process.
985 This description of how to use the FFmpeg libraries with Visual C++ is
986 based on Visual C++ 2005 Express Edition Beta 2. If you have a different
987 version, you might have to modify the procedures slightly.
989 Here are the step-by-step instructions for building the FFmpeg libraries
990 so they can be used with Visual C++:
994 @item Install Visual C++ (if you haven't done so already).
996 @item Install MinGW and MSYS as described above.
998 @item Add a call to @file{vcvars32.bat} (which sets up the environment
999 variables for the Visual C++ tools) as the first line of
1000 @file{msys.bat}. The standard location for @file{vcvars32.bat} is
1001 @file{C:\Program Files\Microsoft Visual Studio 8\VC\bin\vcvars32.bat},
1002 and the standard location for @file{msys.bat} is
1003 @file{C:\msys\1.0\msys.bat}. If this corresponds to your setup, add the
1004 following line as the first line of @file{msys.bat}:
1006 @code{call "C:\Program Files\Microsoft Visual Studio 8\VC\bin\vcvars32.bat"}
1008 @item Start the MSYS shell (file @file{msys.bat}) and type @code{link.exe}.
1009 If you get a help message with the command line options of @code{link.exe},
1010 this means your environment variables are set up correctly, the
1011 Microsoft linker is on the path and will be used by FFmpeg to
1012 create Visual-C++-compatible import libraries.
1014 @item Extract the current version of FFmpeg and change to the FFmpeg directory.
1016 @item Type the command
1017 @code{./configure --enable-shared --disable-static --enable-memalign-hack}
1018 to configure and, if that didn't produce any errors,
1019 type @code{make} to build FFmpeg.
1021 @item The subdirectories @file{libavformat}, @file{libavcodec}, and
1022 @file{libavutil} should now contain the files @file{avformat.dll},
1023 @file{avformat.lib}, @file{avcodec.dll}, @file{avcodec.lib},
1024 @file{avutil.dll}, and @file{avutil.lib}, respectively. Copy the three
1025 DLLs to your System32 directory (typically @file{C:\Windows\System32}).
1029 And here is how to use these libraries with Visual C++:
1033 @item Create a new console application ("File / New / Project") and then
1034 select "Win32 Console Application". On the appropriate page of the
1035 Application Wizard, uncheck the "Precompiled headers" option.
1037 @item Write the source code for your application, or, for testing, just
1038 copy the code from an existing sample application into the source file
1039 that Visual C++ has already created for you. (Note that your source
1040 filehas to have a @code{.cpp} extension; otherwise, Visual C++ won't
1041 compile the FFmpeg headers correctly because in C mode, it doesn't
1042 recognize the @code{inline} keyword.) For example, you can copy
1043 @file{output_example.c} from the FFmpeg distribution (but you will
1044 have to make minor modifications so the code will compile under
1047 @item Open the "Project / Properties" dialog box. In the "Configuration"
1048 combo box, select "All Configurations" so that the changes you make will
1049 affect both debug and release builds. In the tree view on the left hand
1050 side, select "C/C++ / General", then edit the "Additional Include
1051 Directories" setting to contain the complete paths to the
1052 @file{libavformat}, @file{libavcodec}, and @file{libavutil}
1053 subdirectories of your FFmpeg directory. Note that the directories have
1054 to be separated using semicolons. Now select "Linker / General" from the
1055 tree view and edit the "Additional Library Directories" setting to
1056 contain the same three directories.
1058 @item Still in the "Project / Properties" dialog box, select "Linker / Input"
1059 from the tree view, then add the files @file{avformat.lib},
1060 @file{avcodec.lib}, and @file{avutil.lib} to the end of the "Additional
1061 Dependencies". Note that the names of the libraries have to be separated
1064 @item Now, select "C/C++ / Code Generation" from the tree view. Select
1065 "Debug" in the "Configuration" combo box. Make sure that "Runtime
1066 Library" is set to "Multi-threaded Debug DLL". Then, select "Release" in
1067 the "Configuration" combo box and make sure that "Runtime Library" is
1068 set to "Multi-threaded DLL".
1070 @item Click "OK" to close the "Project / Properties" dialog box and build
1071 the application. Hopefully, it should compile and run cleanly. If you
1072 used @file{output_example.c} as your sample application, you will get a
1073 few compiler errors, but they are easy to fix. The first type of error
1074 occurs because Visual C++ doesn't allow an @code{int} to be converted to
1075 an @code{enum} without a cast. To solve the problem, insert the required
1076 casts (this error occurs once for a @code{CodecID} and once for a
1077 @code{CodecType}). The second type of error occurs because C++ requires
1078 the return value of @code{malloc} to be cast to the exact type of the
1079 pointer it is being assigned to. Visual C++ will complain that, for
1080 example, @code{(void *)} is being assigned to @code{(uint8_t *)} without
1081 an explicit cast. So insert an explicit cast in these places to silence
1082 the compiler. The third type of error occurs because the @code{snprintf}
1083 library function is called @code{_snprintf} under Visual C++. So just
1084 add an underscore to fix the problem. With these changes,
1085 @file{output_example.c} should compile under Visual C++, and the
1086 resulting executable should produce valid video files.
1090 @subsection Cross compilation for Windows with Linux
1092 You must use the MinGW cross compilation tools available at
1093 @url{http://www.mingw.org/}.
1095 Then configure FFmpeg with the following options:
1097 ./configure --enable-mingw32 --cross-prefix=i386-mingw32msvc-
1099 (you can change the cross-prefix according to the prefix chosen for the
1102 Then you can easily test FFmpeg with Wine
1103 (@url{http://www.winehq.com/}).
1105 @subsection Compilation under Cygwin
1107 Cygwin works very much like Unix.
1109 Just install your Cygwin with all the "Base" packages, plus the
1110 following "Devel" ones:
1112 binutils, gcc-core, make, subversion
1115 Do not install binutils-20060709-1 (they are buggy on shared builds);
1116 use binutils-20050610-1 instead.
1121 ./configure --enable-static --disable-shared
1124 to make a static build or
1127 ./configure --enable-shared --disable-static
1130 to build shared libraries.
1132 If you want to build FFmpeg with additional libraries, download Cygwin
1133 "Devel" packages for Ogg and Vorbis from any Cygwin packages repository
1134 and/or SDL, xvid, faac, faad2 packages from Cygwin Ports,
1135 (@url{http://cygwinports.dotsrc.org/}).
1137 @subsection Crosscompilation for Windows under Cygwin
1139 With Cygwin you can create Windows binaries that don't need the cygwin1.dll.
1141 Just install your Cygwin as explained before, plus these additional
1144 gcc-mingw-core, mingw-runtime, mingw-zlib
1147 and add some special flags to your configure invocation.
1149 For a static build run
1151 ./configure --enable-mingw32 --enable-memalign-hack --enable-static --disable-shared --extra-cflags=-mno-cygwin --extra-libs=-mno-cygwin
1154 and for a build with shared libraries
1156 ./configure --enable-mingw32 --enable-memalign-hack --enable-shared --disable-static --extra-cflags=-mno-cygwin --extra-libs=-mno-cygwin
1163 The configure script should guess the configuration itself.
1164 Networking support is currently not finished.
1165 errno issues fixed by Andrew Bachmann.
1169 François Revol - revol at free dot fr - April 2002
1171 The configure script should guess the configuration itself,
1172 however I still didn't test building on the net_server version of BeOS.
1174 FFserver is broken (needs poll() implementation).
1176 There are still issues with errno codes, which are negative in BeOS, and
1177 that FFmpeg negates when returning. This ends up turning errors into
1178 valid results, then crashes.
1181 @chapter Developers Guide
1185 @item libavcodec is the library containing the codecs (both encoding and
1186 decoding). Look at @file{libavcodec/apiexample.c} to see how to use it.
1188 @item libavformat is the library containing the file format handling (mux and
1189 demux code for several formats). Look at @file{ffplay.c} to use it in a
1190 player. See @file{output_example.c} to use it to generate audio or video
1195 @section Integrating libavcodec or libavformat in your program
1197 You can integrate all the source code of the libraries to link them
1198 statically to avoid any version problem. All you need is to provide a
1199 'config.mak' and a 'config.h' in the parent directory. See the defines
1200 generated by ./configure to understand what is needed.
1202 You can use libavcodec or libavformat in your commercial program, but
1203 @emph{any patch you make must be published}. The best way to proceed is
1204 to send your patches to the FFmpeg mailing list.
1207 @section Coding Rules
1209 FFmpeg is programmed in the ISO C90 language with a few additional
1210 features from ISO C99, namely:
1213 the @samp{inline} keyword;
1217 designated struct initializers (@samp{struct s x = @{ .i = 17 @};})
1219 compound literals (@samp{x = (struct s) @{ 17, 23 @};})
1222 These features are supported by all compilers we care about, so we won't
1223 accept patches to remove their use unless they absolutely don't impair
1224 clarity and performance.
1226 All code must compile with GCC 2.95 and GCC 3.3. Currently, FFmpeg also
1227 compiles with several other compilers, such as the Compaq ccc compiler
1228 or Sun Studio 9, and we would like to keep it that way unless it would
1229 be exceedingly involved. To ensure compatibility, please don't use any
1230 additional C99 features or GCC extensions. Especially watch out for:
1233 mixing statements and declarations;
1235 @samp{long long} (use @samp{int64_t} instead);
1237 @samp{__attribute__} not protected by @samp{#ifdef __GNUC__} or similar;
1239 GCC statement expressions (@samp{(x = (@{ int y = 4; y; @})}).
1243 The presentation is the one specified by 'indent -i4 -kr -nut'.
1244 The TAB character is forbidden outside of Makefiles as is any
1245 form of trailing whitespace. Commits containing either will be
1246 rejected by the Subversion repository.
1248 Main priority in FFmpeg is simplicity and small code size (=less
1251 Comments: Use the JavaDoc/Doxygen
1252 format (see examples below) so that code documentation
1253 can be generated automatically. All nontrivial functions should have a comment
1254 above them explaining what the function does, even if it's just one sentence.
1255 All structures and their member variables should be documented, too.
1268 typedef struct Foobar@{
1269 int var1; /**< var1 description */
1270 int var2; ///< var2 description
1271 /** var3 description */
1279 * @@param my_parameter description of my_parameter
1280 * @@return return value description
1282 int myfunc(int my_parameter)
1286 fprintf and printf are forbidden in libavformat and libavcodec,
1287 please use av_log() instead.
1289 @section Development Policy
1293 You must not commit code which breaks FFmpeg! (Meaning unfinished but
1294 enabled code which breaks compilation or compiles but does not work or
1295 breaks the regression tests)
1296 You can commit unfinished stuff (for testing etc), but it must be disabled
1297 (#ifdef etc) by default so it does not interfere with other developers'
1300 You don't have to over-test things. If it works for you, and you think it
1301 should work for others, then commit. If your code has problems
1302 (portability, triggers compiler bugs, unusual environment etc) they will be
1303 reported and eventually fixed.
1305 Do not commit unrelated changes together, split them into self-contained
1308 Do not change behavior of the program (renaming options etc) without
1309 first discussing it on the ffmpeg-devel mailing list. Do not remove
1310 functionality from the code. Just improve!
1312 Note: Redundant code can be removed.
1314 Do not commit changes to the build system (Makefiles, configure script)
1315 which change behavior, defaults etc, without asking first. The same
1316 applies to compiler warning fixes, trivial looking fixes and to code
1317 maintained by other developers. We usually have a reason for doing things
1318 the way we do. Send your changes as patches to the ffmpeg-devel mailing
1319 list, and if the code maintainers say OK, you may commit. This does not
1320 apply to files you wrote and/or maintain.
1322 We refuse source indentation and other cosmetic changes if they are mixed
1323 with functional changes, such commits will be rejected and removed. Every
1324 developer has his own indentation style, you should not change it. Of course
1325 if you (re)write something, you can use your own style, even though we would
1326 prefer if the indentation throughout FFmpeg was consistent (Many projects
1327 force a given indentation style - we don't.). If you really need to make
1328 indentation changes (try to avoid this), separate them strictly from real
1331 NOTE: If you had to put if()@{ .. @} over a large (> 5 lines) chunk of code,
1332 then either do NOT change the indentation of the inner part within (don't
1333 move it to the right)! or do so in a separate commit
1335 Always fill out the commit log message. Describe in a few lines what you
1336 changed and why. You can refer to mailing list postings if you fix a
1337 particular bug. Comments such as "fixed!" or "Changed it." are unacceptable.
1339 If you apply a patch by someone else, include the name and email address in
1340 the log message. Since the ffmpeg-cvslog mailing list is publicly
1341 archived you should add some SPAM protection to the email address. Send an
1342 answer to ffmpeg-devel (or wherever you got the patch from) saying that
1343 you applied the patch.
1345 Do NOT commit to code actively maintained by others without permission.
1346 Send a patch to ffmpeg-devel instead. If noone answers within a reasonable
1347 timeframe (12h for build failures and security fixes, 3 days small changes,
1348 1 week for big patches) then commit your patch if you think it's OK.
1349 Also note, the maintainer can simply ask for more time to review!
1351 Subscribe to the ffmpeg-cvslog mailing list. The diffs of all commits
1352 are sent there and reviewed by all the other developers. Bugs and possible
1353 improvements or general questions regarding commits are discussed there. We
1354 expect you to react if problems with your code are uncovered.
1356 Update the documentation if you change behavior or add features. If you are
1357 unsure how best to do this, send a patch to ffmpeg-devel, the documentation
1358 maintainer(s) will review and commit your stuff.
1360 Never write to unallocated memory, never write over the end of arrays,
1361 always check values read from some untrusted source before using them
1362 as array index or other risky things.
1364 Remember to check if you need to bump versions for the specific libav
1365 parts (libavutil, libavcodec, libavformat) you are changing. You need
1366 to change the version integer and the version string.
1367 Incrementing the first component means no backward compatibility to
1368 previous versions (e.g. removal of a function from the public API).
1369 Incrementing the second component means backward compatible change
1370 (e.g. addition of a function to the public API).
1371 Incrementing the third component means a noteworthy binary compatible
1372 change (e.g. encoder bug fix that matters for the decoder).
1374 If you add a new codec, remember to update the changelog, add it to
1375 the supported codecs table in the documentation and bump the second
1376 component of the @file{libavcodec} version number appropriately. If
1377 it has a fourcc, add it to @file{libavformat/avienc.c}, even if it
1381 We think our rules are not too hard. If you have comments, contact us.
1383 Note, these rules are mostly borrowed from the MPlayer project.
1385 @section Submitting patches
1387 First, (@pxref{Coding Rules}) above if you didn't yet.
1389 When you submit your patch, try to send a unified diff (diff '-up'
1390 option). I cannot read other diffs :-)
1392 Also please do not submit patches which contain several unrelated changes.
1393 Split them into individual self-contained patches; this makes reviewing
1396 Run the regression tests before submitting a patch so that you can
1397 verify that there are no big problems.
1399 Patches should be posted as base64 encoded attachments (or any other
1400 encoding which ensures that the patch won't be trashed during
1401 transmission) to the ffmpeg-devel mailing list, see
1402 @url{http://lists.mplayerhq.hu/mailman/listinfo/ffmpeg-devel}
1404 It also helps quite a bit if you tell us what the patch does (for example
1405 'replaces lrint by lrintf'), and why (for example '*BSD isn't C99 compliant
1406 and has no lrint()')
1408 We reply to all submitted patches and either apply or reject with some
1409 explanation why, but sometimes we are quite busy so it can take a week or two.
1411 @section Regression tests
1413 Before submitting a patch (or committing to the repository), you should at least
1414 test that you did not break anything.
1416 The regression tests build a synthetic video stream and a synthetic
1417 audio stream. These are then encoded and decoded with all codecs or
1418 formats. The CRC (or MD5) of each generated file is recorded in a
1419 result file. A 'diff' is launched to compare the reference results and
1422 The regression tests then go on to test the FFserver code with a
1423 limited set of streams. It is important that this step runs correctly
1426 Run 'make test' to test all the codecs and formats.
1428 Run 'make fulltest' to test all the codecs, formats and FFserver.
1430 [Of course, some patches may change the results of the regression tests. In
1431 this case, the reference results of the regression tests shall be modified