1 # Port on which the server is listening. You must select a different
2 # port from your standard HTTP web server if it is running on the same
6 # Address on which the server is bound. Only useful if you have
7 # several network interfaces.
8 HTTPBindAddress 0.0.0.0
10 # Number of simultaneous HTTP connections that can be handled. It has
11 # to be defined *before* the MaxClients parameter, since it defines the
12 # MaxClients maximum limit.
13 MaxHTTPConnections 2000
15 # Number of simultaneous requests that can be handled. Since FFServer
16 # is very fast, it is more likely that you will want to leave this high
17 # and use MaxBandwidth, below.
20 # This the maximum amount of kbit/sec that you are prepared to
21 # consume when streaming to clients.
24 # Access log file (uses standard Apache log file format)
25 # '-' is the standard output.
28 ##################################################################
29 # Definition of the live feeds. Each live feed contains one video
30 # and/or audio sequence coming from an ffmpeg encoder or another
31 # ffserver. This sequence may be encoded simultaneously with several
32 # codecs at several resolutions.
36 # You must use 'ffmpeg' to send a live feed to ffserver. In this
37 # example, you can type:
39 # ffmpeg http://localhost:8090/feed1.ffm
41 # ffserver can also do time shifting. It means that it can stream any
42 # previously recorded live stream. The request should contain:
43 # "http://xxxx?date=[YYYY-MM-DDT][[HH:]MM:]SS[.m...]".You must specify
44 # a path where the feed is stored on disk. You also specify the
45 # maximum size of the feed, where zero means unlimited. Default:
46 # File=/tmp/feed_name.ffm FileMaxSize=5M
51 # ReadOnlyFile /saved/specialvideo.ffm
52 # This marks the file as readonly and it will not be deleted or updated.
54 # Specify launch in order to start ffmpeg automatically.
55 # First ffmpeg must be defined with an appropriate path if needed,
56 # after that options can follow, but avoid adding the http:// field
59 # Only allow connections from localhost to the feed.
65 ##################################################################
66 # Now you can define each stream which will be generated from the
67 # original audio and video stream. Each format has a filename (here
68 # 'test1.mpg'). FFServer will send this stream when answering a
69 # request containing this filename.
73 # coming from live feed 'feed1'
76 # Format of the stream : you can choose among:
77 # mpeg : MPEG-1 multiplexed video and audio
78 # mpegvideo : only MPEG-1 video
79 # mp2 : MPEG-2 audio (use AudioCodec to select layer 2 and 3 codec)
80 # ogg : Ogg format (Vorbis audio codec)
81 # rm : RealNetworks-compatible stream. Multiplexed audio and video.
82 # ra : RealNetworks-compatible stream. Audio only.
83 # mpjpeg : Multipart JPEG (works with Netscape without any plugin)
84 # jpeg : Generate a single JPEG image.
85 # mjpeg : Generate a M-JPEG stream.
86 # asf : ASF compatible streaming (Windows Media Player format).
87 # swf : Macromedia Flash compatible stream
88 # avi : AVI format (MPEG-4 video, MPEG audio sound)
91 # Bitrate for the audio stream. Codecs usually support only a few
95 # Number of audio channels: 1 = mono, 2 = stereo
98 # Sampling frequency for audio. When using low bitrates, you should
99 # lower this frequency to 22050 or 11025. The supported frequencies
100 # depend on the selected audio codec.
101 AudioSampleRate 44100
103 # Bitrate for the video stream
106 # Ratecontrol buffer size
109 # Number of frames per second
112 # Size of the video frame: WxH (default: 160x128)
113 # The following abbreviations are defined: sqcif, qcif, cif, 4cif, qqvga,
114 # qvga, vga, svga, xga, uxga, qxga, sxga, qsxga, hsxga, wvga, wxga, wsxga,
115 # wuxga, woxga, wqsxga, wquxga, whsxga, whuxga, cga, ega, hd480, hd720,
119 # Transmit only intra frames (useful for low bitrates, but kills frame rate).
122 # If non-intra only, an intra frame is transmitted every VideoGopSize
123 # frames. Video synchronization can only begin at an intra frame.
126 # More MPEG-4 parameters
130 # Choose your codecs:
132 #VideoCodec mpeg1video
143 # Set this to the number of seconds backwards in time to start. Note that
144 # most players will buffer 5-10 seconds of video, and also you need to allow
145 # for a keyframe to appear in the data stream.
150 # You can allow ranges of addresses (or single addresses)
151 #ACL ALLOW <first address> <last address>
153 # You can deny ranges of addresses (or single addresses)
154 #ACL DENY <first address> <last address>
156 # You can repeat the ACL allow/deny as often as you like. It is on a per
157 # stream basis. The first match defines the action. If there are no matches,
158 # then the default is the inverse of the last ACL statement.
160 # Thus 'ACL allow localhost' only allows access from localhost.
161 # 'ACL deny 1.0.0.0 1.255.255.255' would deny the whole of network 1 and
162 # allow everybody else.
167 ##################################################################
230 #AudioSampleRate 44100
239 #Metadata title "Stream title"
242 #AudioSampleRate 44100
247 # Real with audio only at 32 kbits
258 # Real with audio and video at 64 kbits
271 ##################################################################
272 # A stream coming from a file: you only need to set the input
273 # filename and optionally a new format. Supported conversions:
277 #File "/usr/local/httpd/htdocs/tlive.rm"
282 #File "/usr/local/httpd/htdocs/test.asf"
284 #Metadata author "Me"
285 #Metadata copyright "Super MegaCorp"
286 #Metadata title "Test stream from disk"
287 #Metadata comment "Test comment"
291 ##################################################################
294 # You can access this stream with the RTSP URL:
295 # rtsp://localhost:5454/test1-rtsp.mpg
297 # A non-standard RTSP redirector is also created. Its URL is:
298 # http://localhost:8090/test1-rtsp.rtsp
300 #<Stream test1-rtsp.mpg>
302 #File "/usr/local/httpd/htdocs/test1.mpg"
306 # Transcode an incoming live feed to another live feed,
307 # using libx264 and video presets
316 #AVPresetVideo default
317 #AVPresetVideo baseline
318 #AVOptionVideo flags +global_header
323 #AudioSampleRate 22050
324 #AVOptionAudio flags +global_header
327 ##################################################################
328 # SDP/multicast examples
330 # If you want to send your stream in multicast, you must set the
331 # multicast address with MulticastAddress. The port and the TTL can
334 # An SDP file is automatically generated by ffserver by adding the
335 # 'sdp' extension to the stream name (here
336 # http://localhost:8090/test1-sdp.sdp). You should usually give this
337 # file to your player to play the stream.
339 # The 'NoLoop' option can be used to avoid looping when the stream is
342 #<Stream test1-sdp.mpg>
344 #File "/usr/local/httpd/htdocs/test1.mpg"
345 #MulticastAddress 224.124.0.1
352 ##################################################################
360 # Only allow local people to get the status
362 ACL allow 192.168.0.0 192.168.255.255
364 #FaviconURL http://pond1.gladstonefamily.net:8080/favicon.ico
368 # Redirect index.html to the appropriate site
370 <Redirect index.html>
371 URL http://www.ffmpeg.org/