2 * copyright (c) 2001 Fabrice Bellard
4 * This file is part of Libav.
6 * Libav is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU Lesser General Public
8 * License as published by the Free Software Foundation; either
9 * version 2.1 of the License, or (at your option) any later version.
11 * Libav is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * Lesser General Public License for more details.
16 * You should have received a copy of the GNU Lesser General Public
17 * License along with Libav; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
21 #ifndef AVCODEC_AVCODEC_H
22 #define AVCODEC_AVCODEC_H
30 #include "libavutil/samplefmt.h"
31 #include "libavutil/avutil.h"
32 #include "libavutil/cpu.h"
33 #include "libavutil/dict.h"
34 #include "libavutil/log.h"
35 #include "libavutil/pixfmt.h"
36 #include "libavutil/rational.h"
38 #include "libavcodec/version.h"
40 * @defgroup libavc Encoding/Decoding Library
43 * @defgroup lavc_decoding Decoding
47 * @defgroup lavc_encoding Encoding
51 * @defgroup lavc_codec Codecs
53 * @defgroup lavc_codec_native Native Codecs
56 * @defgroup lavc_codec_wrappers External library wrappers
59 * @defgroup lavc_codec_hwaccel Hardware Accelerators bridge
63 * @defgroup lavc_internal Internal
71 * @defgroup lavc_core Core functions/structures.
74 * Basic definitions, functions for querying libavcodec capabilities,
75 * allocating core structures, etc.
81 * Identify the syntax and semantics of the bitstream.
82 * The principle is roughly:
83 * Two decoders with the same ID can decode the same streams.
84 * Two encoders with the same ID can encode compatible streams.
85 * There may be slight deviations from the principle due to implementation
88 * If you add a codec ID to this list, add it so that
89 * 1. no value of a existing codec ID changes (that would break ABI),
90 * 2. it is as close as possible to similar codecs.
92 * After adding new codec IDs, do not forget to add an entry to the codec
93 * descriptor list and bump libavcodec minor version.
99 AV_CODEC_ID_MPEG1VIDEO,
100 AV_CODEC_ID_MPEG2VIDEO, ///< preferred ID for MPEG-1/2 video decoding
101 AV_CODEC_ID_MPEG2VIDEO_XVMC,
112 AV_CODEC_ID_RAWVIDEO,
113 AV_CODEC_ID_MSMPEG4V1,
114 AV_CODEC_ID_MSMPEG4V2,
115 AV_CODEC_ID_MSMPEG4V3,
138 AV_CODEC_ID_INTERPLAY_VIDEO,
145 AV_CODEC_ID_MSVIDEO1,
150 AV_CODEC_ID_TRUEMOTION1,
151 AV_CODEC_ID_VMDVIDEO,
179 AV_CODEC_ID_TRUEMOTION2,
185 AV_CODEC_ID_SMACKVIDEO,
190 AV_CODEC_ID_JPEG2000,
196 AV_CODEC_ID_DSICINVIDEO,
197 AV_CODEC_ID_TIERTEXSEQVIDEO,
205 AV_CODEC_ID_BETHSOFTVID,
217 AV_CODEC_ID_ESCAPE124,
221 AV_CODEC_ID_MOTIONPIXELS,
233 AV_CODEC_ID_FLASHSV2,
234 AV_CODEC_ID_CDGRAPHICS,
237 AV_CODEC_ID_BINKVIDEO,
238 AV_CODEC_ID_IFF_ILBM,
239 AV_CODEC_ID_IFF_BYTERUN1,
245 AV_CODEC_ID_A64_MULTI,
246 AV_CODEC_ID_A64_MULTI5,
249 AV_CODEC_ID_LAGARITH,
253 AV_CODEC_ID_WMV3IMAGE,
254 AV_CODEC_ID_VC1IMAGE,
256 AV_CODEC_ID_BMV_VIDEO,
263 AV_CODEC_ID_ZEROCODEC,
272 /* various PCM "codecs" */
273 AV_CODEC_ID_FIRST_AUDIO = 0x10000, ///< A dummy id pointing at the start of audio codecs
274 AV_CODEC_ID_PCM_S16LE = 0x10000,
275 AV_CODEC_ID_PCM_S16BE,
276 AV_CODEC_ID_PCM_U16LE,
277 AV_CODEC_ID_PCM_U16BE,
280 AV_CODEC_ID_PCM_MULAW,
281 AV_CODEC_ID_PCM_ALAW,
282 AV_CODEC_ID_PCM_S32LE,
283 AV_CODEC_ID_PCM_S32BE,
284 AV_CODEC_ID_PCM_U32LE,
285 AV_CODEC_ID_PCM_U32BE,
286 AV_CODEC_ID_PCM_S24LE,
287 AV_CODEC_ID_PCM_S24BE,
288 AV_CODEC_ID_PCM_U24LE,
289 AV_CODEC_ID_PCM_U24BE,
290 AV_CODEC_ID_PCM_S24DAUD,
291 AV_CODEC_ID_PCM_ZORK,
292 AV_CODEC_ID_PCM_S16LE_PLANAR,
294 AV_CODEC_ID_PCM_F32BE,
295 AV_CODEC_ID_PCM_F32LE,
296 AV_CODEC_ID_PCM_F64BE,
297 AV_CODEC_ID_PCM_F64LE,
298 AV_CODEC_ID_PCM_BLURAY,
301 AV_CODEC_ID_PCM_S8_PLANAR,
303 /* various ADPCM codecs */
304 AV_CODEC_ID_ADPCM_IMA_QT = 0x11000,
305 AV_CODEC_ID_ADPCM_IMA_WAV,
306 AV_CODEC_ID_ADPCM_IMA_DK3,
307 AV_CODEC_ID_ADPCM_IMA_DK4,
308 AV_CODEC_ID_ADPCM_IMA_WS,
309 AV_CODEC_ID_ADPCM_IMA_SMJPEG,
310 AV_CODEC_ID_ADPCM_MS,
311 AV_CODEC_ID_ADPCM_4XM,
312 AV_CODEC_ID_ADPCM_XA,
313 AV_CODEC_ID_ADPCM_ADX,
314 AV_CODEC_ID_ADPCM_EA,
315 AV_CODEC_ID_ADPCM_G726,
316 AV_CODEC_ID_ADPCM_CT,
317 AV_CODEC_ID_ADPCM_SWF,
318 AV_CODEC_ID_ADPCM_YAMAHA,
319 AV_CODEC_ID_ADPCM_SBPRO_4,
320 AV_CODEC_ID_ADPCM_SBPRO_3,
321 AV_CODEC_ID_ADPCM_SBPRO_2,
322 AV_CODEC_ID_ADPCM_THP,
323 AV_CODEC_ID_ADPCM_IMA_AMV,
324 AV_CODEC_ID_ADPCM_EA_R1,
325 AV_CODEC_ID_ADPCM_EA_R3,
326 AV_CODEC_ID_ADPCM_EA_R2,
327 AV_CODEC_ID_ADPCM_IMA_EA_SEAD,
328 AV_CODEC_ID_ADPCM_IMA_EA_EACS,
329 AV_CODEC_ID_ADPCM_EA_XAS,
330 AV_CODEC_ID_ADPCM_EA_MAXIS_XA,
331 AV_CODEC_ID_ADPCM_IMA_ISS,
332 AV_CODEC_ID_ADPCM_G722,
333 AV_CODEC_ID_ADPCM_IMA_APC,
336 AV_CODEC_ID_AMR_NB = 0x12000,
339 /* RealAudio codecs*/
340 AV_CODEC_ID_RA_144 = 0x13000,
343 /* various DPCM codecs */
344 AV_CODEC_ID_ROQ_DPCM = 0x14000,
345 AV_CODEC_ID_INTERPLAY_DPCM,
346 AV_CODEC_ID_XAN_DPCM,
347 AV_CODEC_ID_SOL_DPCM,
350 AV_CODEC_ID_MP2 = 0x15000,
351 AV_CODEC_ID_MP3, ///< preferred ID for decoding MPEG audio layer 1, 2 or 3
361 AV_CODEC_ID_VMDAUDIO,
367 AV_CODEC_ID_WESTWOOD_SND1,
368 AV_CODEC_ID_GSM, ///< as in Berlin toast format
371 AV_CODEC_ID_TRUESPEECH,
373 AV_CODEC_ID_SMACKAUDIO,
376 AV_CODEC_ID_DSICINAUDIO,
378 AV_CODEC_ID_MUSEPACK7,
380 AV_CODEC_ID_GSM_MS, /* as found in WAV */
384 AV_CODEC_ID_NELLYMOSER,
385 AV_CODEC_ID_MUSEPACK8,
387 AV_CODEC_ID_WMAVOICE,
389 AV_CODEC_ID_WMALOSSLESS,
398 AV_CODEC_ID_BINKAUDIO_RDFT,
399 AV_CODEC_ID_BINKAUDIO_DCT,
400 AV_CODEC_ID_AAC_LATM,
405 AV_CODEC_ID_8SVX_EXP,
406 AV_CODEC_ID_8SVX_FIB,
407 AV_CODEC_ID_BMV_AUDIO,
412 AV_CODEC_ID_COMFORT_NOISE,
415 /* subtitle codecs */
416 AV_CODEC_ID_FIRST_SUBTITLE = 0x17000, ///< A dummy ID pointing at the start of subtitle codecs.
417 AV_CODEC_ID_DVD_SUBTITLE = 0x17000,
418 AV_CODEC_ID_DVB_SUBTITLE,
419 AV_CODEC_ID_TEXT, ///< raw UTF-8 text
422 AV_CODEC_ID_MOV_TEXT,
423 AV_CODEC_ID_HDMV_PGS_SUBTITLE,
424 AV_CODEC_ID_DVB_TELETEXT,
427 /* other specific kind of codecs (generally used for attachments) */
428 AV_CODEC_ID_FIRST_UNKNOWN = 0x18000, ///< A dummy ID pointing at the start of various fake codecs.
429 AV_CODEC_ID_TTF = 0x18000,
431 AV_CODEC_ID_PROBE = 0x19000, ///< codec_id is not known (like AV_CODEC_ID_NONE) but lavf should attempt to identify it
433 AV_CODEC_ID_MPEG2TS = 0x20000, /**< _FAKE_ codec to indicate a raw MPEG-2 TS
434 * stream (only used by libavformat) */
435 AV_CODEC_ID_MPEG4SYSTEMS = 0x20001, /**< _FAKE_ codec to indicate a MPEG-4 Systems
436 * stream (only used by libavformat) */
437 AV_CODEC_ID_FFMETADATA = 0x21000, ///< Dummy codec for streams containing only metadata information.
440 #include "old_codec_ids.h"
445 #define CodecID AVCodecID
449 * This struct describes the properties of a single codec described by an
451 * @see avcodec_get_descriptor()
453 typedef struct AVCodecDescriptor {
455 enum AVMediaType type;
457 * Name of the codec described by this descriptor. It is non-empty and
458 * unique for each codec descriptor. It should contain alphanumeric
459 * characters and '_' only.
463 * A more descriptive name for this codec. May be NULL.
465 const char *long_name;
467 * Codec properties, a combination of AV_CODEC_PROP_* flags.
473 * Codec uses only intra compression.
476 #define AV_CODEC_PROP_INTRA_ONLY (1 << 0)
478 * Codec supports lossy compression. Audio and video codecs only.
479 * @note a codec may support both lossy and lossless
482 #define AV_CODEC_PROP_LOSSY (1 << 1)
484 * Codec supports lossless compression. Audio and video codecs only.
486 #define AV_CODEC_PROP_LOSSLESS (1 << 2)
488 #if FF_API_OLD_DECODE_AUDIO
490 #define AVCODEC_MAX_AUDIO_FRAME_SIZE 192000 // 1 second of 48khz 32bit audio
494 * @ingroup lavc_decoding
495 * Required number of additionally allocated bytes at the end of the input bitstream for decoding.
496 * This is mainly needed because some optimized bitstream readers read
497 * 32 or 64 bit at once and could read over the end.<br>
498 * Note: If the first 23 bits of the additional bytes are not 0, then damaged
499 * MPEG bitstreams could cause overread and segfault.
501 #define FF_INPUT_BUFFER_PADDING_SIZE 8
504 * @ingroup lavc_encoding
505 * minimum encoding buffer size
506 * Used to avoid some checks during header writing.
508 #define FF_MIN_BUFFER_SIZE 16384
512 * @ingroup lavc_encoding
513 * motion estimation type.
516 ME_ZERO = 1, ///< no search, that is use 0,0 vector whenever one is needed
520 ME_EPZS, ///< enhanced predictive zonal search
521 ME_X1, ///< reserved for experiments
522 ME_HEX, ///< hexagon based search
523 ME_UMH, ///< uneven multi-hexagon search
525 ME_ITER, ///< iterative search
527 ME_TESA, ///< transformed exhaustive search algorithm
531 * @ingroup lavc_decoding
534 /* We leave some space between them for extensions (drop some
535 * keyframes for intra-only or drop just some bidir frames). */
536 AVDISCARD_NONE =-16, ///< discard nothing
537 AVDISCARD_DEFAULT = 0, ///< discard useless packets like 0 size packets in avi
538 AVDISCARD_NONREF = 8, ///< discard all non reference
539 AVDISCARD_BIDIR = 16, ///< discard all bidirectional frames
540 AVDISCARD_NONKEY = 32, ///< discard all frames except keyframes
541 AVDISCARD_ALL = 48, ///< discard all
544 enum AVColorPrimaries{
545 AVCOL_PRI_BT709 = 1, ///< also ITU-R BT1361 / IEC 61966-2-4 / SMPTE RP177 Annex B
546 AVCOL_PRI_UNSPECIFIED = 2,
547 AVCOL_PRI_BT470M = 4,
548 AVCOL_PRI_BT470BG = 5, ///< also ITU-R BT601-6 625 / ITU-R BT1358 625 / ITU-R BT1700 625 PAL & SECAM
549 AVCOL_PRI_SMPTE170M = 6, ///< also ITU-R BT601-6 525 / ITU-R BT1358 525 / ITU-R BT1700 NTSC
550 AVCOL_PRI_SMPTE240M = 7, ///< functionally identical to above
552 AVCOL_PRI_NB , ///< Not part of ABI
555 enum AVColorTransferCharacteristic{
556 AVCOL_TRC_BT709 = 1, ///< also ITU-R BT1361
557 AVCOL_TRC_UNSPECIFIED = 2,
558 AVCOL_TRC_GAMMA22 = 4, ///< also ITU-R BT470M / ITU-R BT1700 625 PAL & SECAM
559 AVCOL_TRC_GAMMA28 = 5, ///< also ITU-R BT470BG
560 AVCOL_TRC_SMPTE240M = 7,
561 AVCOL_TRC_NB , ///< Not part of ABI
566 AVCOL_SPC_BT709 = 1, ///< also ITU-R BT1361 / IEC 61966-2-4 xvYCC709 / SMPTE RP177 Annex B
567 AVCOL_SPC_UNSPECIFIED = 2,
569 AVCOL_SPC_BT470BG = 5, ///< also ITU-R BT601-6 625 / ITU-R BT1358 625 / ITU-R BT1700 625 PAL & SECAM / IEC 61966-2-4 xvYCC601
570 AVCOL_SPC_SMPTE170M = 6, ///< also ITU-R BT601-6 525 / ITU-R BT1358 525 / ITU-R BT1700 NTSC / functionally identical to above
571 AVCOL_SPC_SMPTE240M = 7,
572 AVCOL_SPC_YCOCG = 8, ///< Used by Dirac / VC-2 and H.264 FRext, see ITU-T SG16
573 AVCOL_SPC_NB , ///< Not part of ABI
577 AVCOL_RANGE_UNSPECIFIED = 0,
578 AVCOL_RANGE_MPEG = 1, ///< the normal 219*2^(n-8) "MPEG" YUV ranges
579 AVCOL_RANGE_JPEG = 2, ///< the normal 2^n-1 "JPEG" YUV ranges
580 AVCOL_RANGE_NB , ///< Not part of ABI
584 * X X 3 4 X X are luma samples,
585 * 1 2 1-6 are possible chroma positions
586 * X X 5 6 X 0 is undefined/unknown position
588 enum AVChromaLocation{
589 AVCHROMA_LOC_UNSPECIFIED = 0,
590 AVCHROMA_LOC_LEFT = 1, ///< mpeg2/4, h264 default
591 AVCHROMA_LOC_CENTER = 2, ///< mpeg1, jpeg, h263
592 AVCHROMA_LOC_TOPLEFT = 3, ///< DV
593 AVCHROMA_LOC_TOP = 4,
594 AVCHROMA_LOC_BOTTOMLEFT = 5,
595 AVCHROMA_LOC_BOTTOM = 6,
596 AVCHROMA_LOC_NB , ///< Not part of ABI
599 enum AVAudioServiceType {
600 AV_AUDIO_SERVICE_TYPE_MAIN = 0,
601 AV_AUDIO_SERVICE_TYPE_EFFECTS = 1,
602 AV_AUDIO_SERVICE_TYPE_VISUALLY_IMPAIRED = 2,
603 AV_AUDIO_SERVICE_TYPE_HEARING_IMPAIRED = 3,
604 AV_AUDIO_SERVICE_TYPE_DIALOGUE = 4,
605 AV_AUDIO_SERVICE_TYPE_COMMENTARY = 5,
606 AV_AUDIO_SERVICE_TYPE_EMERGENCY = 6,
607 AV_AUDIO_SERVICE_TYPE_VOICE_OVER = 7,
608 AV_AUDIO_SERVICE_TYPE_KARAOKE = 8,
609 AV_AUDIO_SERVICE_TYPE_NB , ///< Not part of ABI
613 * @ingroup lavc_encoding
615 typedef struct RcOverride{
618 int qscale; // If this is 0 then quality_factor will be used instead.
619 float quality_factor;
622 #define FF_MAX_B_FRAMES 16
625 These flags can be passed in AVCodecContext.flags before initialization.
626 Note: Not everything is supported yet.
629 #define CODEC_FLAG_QSCALE 0x0002 ///< Use fixed qscale.
630 #define CODEC_FLAG_4MV 0x0004 ///< 4 MV per MB allowed / advanced prediction for H.263.
631 #define CODEC_FLAG_QPEL 0x0010 ///< Use qpel MC.
632 #define CODEC_FLAG_GMC 0x0020 ///< Use GMC.
633 #define CODEC_FLAG_MV0 0x0040 ///< Always try a MB with MV=<0,0>.
635 * The parent program guarantees that the input for B-frames containing
636 * streams is not written to for at least s->max_b_frames+1 frames, if
637 * this is not set the input will be copied.
639 #define CODEC_FLAG_INPUT_PRESERVED 0x0100
640 #define CODEC_FLAG_PASS1 0x0200 ///< Use internal 2pass ratecontrol in first pass mode.
641 #define CODEC_FLAG_PASS2 0x0400 ///< Use internal 2pass ratecontrol in second pass mode.
642 #define CODEC_FLAG_GRAY 0x2000 ///< Only decode/encode grayscale.
643 #define CODEC_FLAG_EMU_EDGE 0x4000 ///< Don't draw edges.
644 #define CODEC_FLAG_PSNR 0x8000 ///< error[?] variables will be set during encoding.
645 #define CODEC_FLAG_TRUNCATED 0x00010000 /** Input bitstream might be truncated at a random
646 location instead of only at frame boundaries. */
647 #define CODEC_FLAG_NORMALIZE_AQP 0x00020000 ///< Normalize adaptive quantization.
648 #define CODEC_FLAG_INTERLACED_DCT 0x00040000 ///< Use interlaced DCT.
649 #define CODEC_FLAG_LOW_DELAY 0x00080000 ///< Force low delay.
650 #define CODEC_FLAG_GLOBAL_HEADER 0x00400000 ///< Place global headers in extradata instead of every keyframe.
651 #define CODEC_FLAG_BITEXACT 0x00800000 ///< Use only bitexact stuff (except (I)DCT).
652 /* Fx : Flag for h263+ extra options */
653 #define CODEC_FLAG_AC_PRED 0x01000000 ///< H.263 advanced intra coding / MPEG-4 AC prediction
654 #define CODEC_FLAG_LOOP_FILTER 0x00000800 ///< loop filter
655 #define CODEC_FLAG_INTERLACED_ME 0x20000000 ///< interlaced motion estimation
656 #define CODEC_FLAG_CLOSED_GOP 0x80000000
657 #define CODEC_FLAG2_FAST 0x00000001 ///< Allow non spec compliant speedup tricks.
658 #define CODEC_FLAG2_NO_OUTPUT 0x00000004 ///< Skip bitstream encoding.
659 #define CODEC_FLAG2_LOCAL_HEADER 0x00000008 ///< Place global headers at every keyframe instead of in extradata.
660 #define CODEC_FLAG2_IGNORE_CROP 0x00010000 ///< Discard cropping information from SPS.
662 #if FF_API_MPV_GLOBAL_OPTS
663 #define CODEC_FLAG_CBP_RD 0x04000000 ///< Use rate distortion optimization for cbp.
664 #define CODEC_FLAG_QP_RD 0x08000000 ///< Use rate distortion optimization for qp selectioon.
665 #define CODEC_FLAG2_STRICT_GOP 0x00000002 ///< Strictly enforce GOP size.
666 #define CODEC_FLAG2_SKIP_RD 0x00004000 ///< RD optimal MB level residual skipping
668 #define CODEC_FLAG2_CHUNKS 0x00008000 ///< Input bitstream might be truncated at a packet boundaries instead of only at frame boundaries.
670 /* Unsupported options :
671 * Syntax Arithmetic coding (SAC)
672 * Reference Picture Selection
673 * Independent Segment Decoding */
675 /* codec capabilities */
677 #define CODEC_CAP_DRAW_HORIZ_BAND 0x0001 ///< Decoder can use draw_horiz_band callback.
679 * Codec uses get_buffer() for allocating buffers and supports custom allocators.
680 * If not set, it might not use get_buffer() at all or use operations that
681 * assume the buffer was allocated by avcodec_default_get_buffer.
683 #define CODEC_CAP_DR1 0x0002
684 #define CODEC_CAP_TRUNCATED 0x0008
685 /* Codec can export data for HW decoding (XvMC). */
686 #define CODEC_CAP_HWACCEL 0x0010
688 * Encoder or decoder requires flushing with NULL input at the end in order to
689 * give the complete and correct output.
691 * NOTE: If this flag is not set, the codec is guaranteed to never be fed with
692 * with NULL data. The user can still send NULL data to the public encode
693 * or decode function, but libavcodec will not pass it along to the codec
694 * unless this flag is set.
697 * The decoder has a non-zero delay and needs to be fed with avpkt->data=NULL,
698 * avpkt->size=0 at the end to get the delayed data until the decoder no longer
702 * The encoder needs to be fed with NULL data at the end of encoding until the
703 * encoder no longer returns data.
705 * NOTE: For encoders implementing the AVCodec.encode2() function, setting this
706 * flag also means that the encoder must set the pts and duration for
707 * each output packet. If this flag is not set, the pts and duration will
708 * be determined by libavcodec from the input frame.
710 #define CODEC_CAP_DELAY 0x0020
712 * Codec can be fed a final frame with a smaller size.
713 * This can be used to prevent truncation of the last audio samples.
715 #define CODEC_CAP_SMALL_LAST_FRAME 0x0040
717 * Codec can export data for HW decoding (VDPAU).
719 #define CODEC_CAP_HWACCEL_VDPAU 0x0080
721 * Codec can output multiple frames per AVPacket
722 * Normally demuxers return one frame at a time, demuxers which do not do
723 * are connected to a parser to split what they return into proper frames.
724 * This flag is reserved to the very rare category of codecs which have a
725 * bitstream that cannot be split into frames without timeconsuming
726 * operations like full decoding. Demuxers carring such bitstreams thus
727 * may return multiple frames in a packet. This has many disadvantages like
728 * prohibiting stream copy in many cases thus it should only be considered
731 #define CODEC_CAP_SUBFRAMES 0x0100
733 * Codec is experimental and is thus avoided in favor of non experimental
736 #define CODEC_CAP_EXPERIMENTAL 0x0200
738 * Codec should fill in channel configuration and samplerate instead of container
740 #define CODEC_CAP_CHANNEL_CONF 0x0400
742 * Codec is able to deal with negative linesizes
744 #define CODEC_CAP_NEG_LINESIZES 0x0800
746 * Codec supports frame-level multithreading.
748 #define CODEC_CAP_FRAME_THREADS 0x1000
750 * Codec supports slice-based (or partition-based) multithreading.
752 #define CODEC_CAP_SLICE_THREADS 0x2000
754 * Codec supports changed parameters at any point.
756 #define CODEC_CAP_PARAM_CHANGE 0x4000
758 * Codec supports avctx->thread_count == 0 (auto).
760 #define CODEC_CAP_AUTO_THREADS 0x8000
762 * Audio encoder supports receiving a different number of samples in each call.
764 #define CODEC_CAP_VARIABLE_FRAME_SIZE 0x10000
766 //The following defines may change, don't expect compatibility if you use them.
767 #define MB_TYPE_INTRA4x4 0x0001
768 #define MB_TYPE_INTRA16x16 0x0002 //FIXME H.264-specific
769 #define MB_TYPE_INTRA_PCM 0x0004 //FIXME H.264-specific
770 #define MB_TYPE_16x16 0x0008
771 #define MB_TYPE_16x8 0x0010
772 #define MB_TYPE_8x16 0x0020
773 #define MB_TYPE_8x8 0x0040
774 #define MB_TYPE_INTERLACED 0x0080
775 #define MB_TYPE_DIRECT2 0x0100 //FIXME
776 #define MB_TYPE_ACPRED 0x0200
777 #define MB_TYPE_GMC 0x0400
778 #define MB_TYPE_SKIP 0x0800
779 #define MB_TYPE_P0L0 0x1000
780 #define MB_TYPE_P1L0 0x2000
781 #define MB_TYPE_P0L1 0x4000
782 #define MB_TYPE_P1L1 0x8000
783 #define MB_TYPE_L0 (MB_TYPE_P0L0 | MB_TYPE_P1L0)
784 #define MB_TYPE_L1 (MB_TYPE_P0L1 | MB_TYPE_P1L1)
785 #define MB_TYPE_L0L1 (MB_TYPE_L0 | MB_TYPE_L1)
786 #define MB_TYPE_QUANT 0x00010000
787 #define MB_TYPE_CBP 0x00020000
788 //Note bits 24-31 are reserved for codec specific use (h264 ref0, mpeg1 0mv, ...)
792 * This specifies the area which should be displayed.
793 * Note there may be multiple such areas for one frame.
795 typedef struct AVPanScan{
798 * - encoding: Set by user.
799 * - decoding: Set by libavcodec.
804 * width and height in 1/16 pel
805 * - encoding: Set by user.
806 * - decoding: Set by libavcodec.
812 * position of the top left corner in 1/16 pel for up to 3 fields/frames
813 * - encoding: Set by user.
814 * - decoding: Set by libavcodec.
816 int16_t position[3][2];
819 #define FF_QSCALE_TYPE_MPEG1 0
820 #define FF_QSCALE_TYPE_MPEG2 1
821 #define FF_QSCALE_TYPE_H264 2
822 #define FF_QSCALE_TYPE_VP56 3
824 #define FF_BUFFER_TYPE_INTERNAL 1
825 #define FF_BUFFER_TYPE_USER 2 ///< direct rendering buffers (image is (de)allocated by user)
826 #define FF_BUFFER_TYPE_SHARED 4 ///< Buffer from somewhere else; don't deallocate image (data/base), all other tables are not shared.
827 #define FF_BUFFER_TYPE_COPY 8 ///< Just a (modified) copy of some other buffer, don't deallocate anything.
829 #define FF_BUFFER_HINTS_VALID 0x01 // Buffer hints value is meaningful (if 0 ignore).
830 #define FF_BUFFER_HINTS_READABLE 0x02 // Codec will read from buffer.
831 #define FF_BUFFER_HINTS_PRESERVE 0x04 // User must not alter buffer content.
832 #define FF_BUFFER_HINTS_REUSABLE 0x08 // Codec will reuse the buffer (update).
835 * @defgroup lavc_packet AVPacket
837 * Types and functions for working with AVPacket.
840 enum AVPacketSideDataType {
842 AV_PKT_DATA_NEW_EXTRADATA,
845 * An AV_PKT_DATA_PARAM_CHANGE side data packet is laid out as follows:
848 * if (param_flags & AV_SIDE_DATA_PARAM_CHANGE_CHANNEL_COUNT)
849 * s32le channel_count
850 * if (param_flags & AV_SIDE_DATA_PARAM_CHANGE_CHANNEL_LAYOUT)
851 * u64le channel_layout
852 * if (param_flags & AV_SIDE_DATA_PARAM_CHANGE_SAMPLE_RATE)
854 * if (param_flags & AV_SIDE_DATA_PARAM_CHANGE_DIMENSIONS)
859 AV_PKT_DATA_PARAM_CHANGE,
862 * An AV_PKT_DATA_H263_MB_INFO side data packet contains a number of
863 * structures with info about macroblocks relevant to splitting the
864 * packet into smaller packets on macroblock edges (e.g. as for RFC 2190).
865 * That is, it does not necessarily contain info about all macroblocks,
866 * as long as the distance between macroblocks in the info is smaller
867 * than the target payload size.
868 * Each MB info structure is 12 bytes, and is laid out as follows:
870 * u32le bit offset from the start of the packet
871 * u8 current quantizer at the start of the macroblock
873 * u16le macroblock address within the GOB
874 * u8 horizontal MV predictor
875 * u8 vertical MV predictor
876 * u8 horizontal MV predictor for block number 3
877 * u8 vertical MV predictor for block number 3
880 AV_PKT_DATA_H263_MB_INFO,
884 * This structure stores compressed data. It is typically exported by demuxers
885 * and then passed as input to decoders, or received as output from encoders and
886 * then passed to muxers.
888 * For video, it should typically contain one compressed frame. For audio it may
889 * contain several compressed frames.
891 * AVPacket is one of the few structs in Libav, whose size is a part of public
892 * ABI. Thus it may be allocated on stack and no new fields can be added to it
893 * without libavcodec and libavformat major bump.
895 * The semantics of data ownership depends on the destruct field.
896 * If it is set, the packet data is dynamically allocated and is valid
897 * indefinitely until av_free_packet() is called (which in turn calls the
898 * destruct callback to free the data). If destruct is not set, the packet data
899 * is typically backed by some static buffer somewhere and is only valid for a
900 * limited time (e.g. until the next read call when demuxing).
902 * The side data is always allocated with av_malloc() and is freed in
905 typedef struct AVPacket {
907 * Presentation timestamp in AVStream->time_base units; the time at which
908 * the decompressed packet will be presented to the user.
909 * Can be AV_NOPTS_VALUE if it is not stored in the file.
910 * pts MUST be larger or equal to dts as presentation cannot happen before
911 * decompression, unless one wants to view hex dumps. Some formats misuse
912 * the terms dts and pts/cts to mean something different. Such timestamps
913 * must be converted to true pts/dts before they are stored in AVPacket.
917 * Decompression timestamp in AVStream->time_base units; the time at which
918 * the packet is decompressed.
919 * Can be AV_NOPTS_VALUE if it is not stored in the file.
926 * A combination of AV_PKT_FLAG values
930 * Additional packet data that can be provided by the container.
931 * Packet can contain several types of side information.
936 enum AVPacketSideDataType type;
941 * Duration of this packet in AVStream->time_base units, 0 if unknown.
942 * Equals next_pts - this_pts in presentation order.
945 void (*destruct)(struct AVPacket *);
947 int64_t pos; ///< byte position in stream, -1 if unknown
950 * Time difference in AVStream->time_base units from the pts of this
951 * packet to the point at which the output from the decoder has converged
952 * independent from the availability of previous frames. That is, the
953 * frames are virtually identical no matter if decoding started from
954 * the very first frame or from this keyframe.
955 * Is AV_NOPTS_VALUE if unknown.
956 * This field is not the display duration of the current packet.
957 * This field has no meaning if the packet does not have AV_PKT_FLAG_KEY
960 * The purpose of this field is to allow seeking in streams that have no
961 * keyframes in the conventional sense. It corresponds to the
962 * recovery point SEI in H.264 and match_time_delta in NUT. It is also
963 * essential for some types of subtitle streams to ensure that all
964 * subtitles are correctly displayed after seeking.
966 int64_t convergence_duration;
968 #define AV_PKT_FLAG_KEY 0x0001 ///< The packet contains a keyframe
969 #define AV_PKT_FLAG_CORRUPT 0x0002 ///< The packet content is corrupted
971 enum AVSideDataParamChangeFlags {
972 AV_SIDE_DATA_PARAM_CHANGE_CHANNEL_COUNT = 0x0001,
973 AV_SIDE_DATA_PARAM_CHANGE_CHANNEL_LAYOUT = 0x0002,
974 AV_SIDE_DATA_PARAM_CHANGE_SAMPLE_RATE = 0x0004,
975 AV_SIDE_DATA_PARAM_CHANGE_DIMENSIONS = 0x0008,
982 * This structure describes decoded (raw) audio or video data.
984 * AVFrame must be allocated using avcodec_alloc_frame() and freed with
985 * avcodec_free_frame(). Note that this allocates only the AVFrame itself. The
986 * buffers for the data must be managed through other means.
988 * AVFrame is typically allocated once and then reused multiple times to hold
989 * different data (e.g. a single AVFrame to hold frames received from a
990 * decoder). In such a case, avcodec_get_frame_defaults() should be used to
991 * reset the frame to its original clean state before it is reused again.
993 * sizeof(AVFrame) is not a part of the public ABI, so new fields may be added
994 * to the end with a minor bump.
996 typedef struct AVFrame {
997 #define AV_NUM_DATA_POINTERS 8
999 * pointer to the picture/channel planes.
1000 * This might be different from the first allocated byte
1001 * - encoding: Set by user
1002 * - decoding: set by AVCodecContext.get_buffer()
1004 uint8_t *data[AV_NUM_DATA_POINTERS];
1007 * Size, in bytes, of the data for each picture/channel plane.
1009 * For audio, only linesize[0] may be set. For planar audio, each channel
1010 * plane must be the same size.
1012 * - encoding: Set by user
1013 * - decoding: set by AVCodecContext.get_buffer()
1015 int linesize[AV_NUM_DATA_POINTERS];
1018 * pointers to the data planes/channels.
1020 * For video, this should simply point to data[].
1022 * For planar audio, each channel has a separate data pointer, and
1023 * linesize[0] contains the size of each channel buffer.
1024 * For packed audio, there is just one data pointer, and linesize[0]
1025 * contains the total size of the buffer for all channels.
1027 * Note: Both data and extended_data will always be set by get_buffer(),
1028 * but for planar audio with more channels that can fit in data,
1029 * extended_data must be used by the decoder in order to access all
1032 * encoding: set by user
1033 * decoding: set by AVCodecContext.get_buffer()
1035 uint8_t **extended_data;
1038 * width and height of the video frame
1039 * - encoding: unused
1040 * - decoding: Read by user.
1045 * number of audio samples (per channel) described by this frame
1046 * - encoding: Set by user
1047 * - decoding: Set by libavcodec
1052 * format of the frame, -1 if unknown or unset
1053 * Values correspond to enum AVPixelFormat for video frames,
1054 * enum AVSampleFormat for audio)
1055 * - encoding: unused
1056 * - decoding: Read by user.
1061 * 1 -> keyframe, 0-> not
1062 * - encoding: Set by libavcodec.
1063 * - decoding: Set by libavcodec.
1068 * Picture type of the frame, see ?_TYPE below.
1069 * - encoding: Set by libavcodec. for coded_picture (and set by user for input).
1070 * - decoding: Set by libavcodec.
1072 enum AVPictureType pict_type;
1075 * pointer to the first allocated byte of the picture. Can be used in get_buffer/release_buffer.
1076 * This isn't used by libavcodec unless the default get/release_buffer() is used.
1080 uint8_t *base[AV_NUM_DATA_POINTERS];
1083 * sample aspect ratio for the video frame, 0/1 if unknown/unspecified
1084 * - encoding: unused
1085 * - decoding: Read by user.
1087 AVRational sample_aspect_ratio;
1090 * presentation timestamp in time_base units (time when frame should be shown to user)
1091 * If AV_NOPTS_VALUE then frame_rate = 1/time_base will be assumed.
1092 * - encoding: MUST be set by user.
1093 * - decoding: Set by libavcodec.
1098 * pts copied from the AVPacket that was decoded to produce this frame
1099 * - encoding: unused
1100 * - decoding: Read by user.
1105 * dts copied from the AVPacket that triggered returning this frame
1106 * - encoding: unused
1107 * - decoding: Read by user.
1112 * picture number in bitstream order
1113 * - encoding: set by
1114 * - decoding: Set by libavcodec.
1116 int coded_picture_number;
1118 * picture number in display order
1119 * - encoding: set by
1120 * - decoding: Set by libavcodec.
1122 int display_picture_number;
1125 * quality (between 1 (good) and FF_LAMBDA_MAX (bad))
1126 * - encoding: Set by libavcodec. for coded_picture (and set by user for input).
1127 * - decoding: Set by libavcodec.
1132 * is this picture used as reference
1133 * The values for this are the same as the MpegEncContext.picture_structure
1134 * variable, that is 1->top field, 2->bottom field, 3->frame/both fields.
1135 * Set to 4 for delayed, non-reference frames.
1136 * - encoding: unused
1137 * - decoding: Set by libavcodec. (before get_buffer() call)).
1143 * - encoding: unused
1144 * - decoding: Set by libavcodec.
1146 int8_t *qscale_table;
1149 * - encoding: unused
1150 * - decoding: Set by libavcodec.
1160 * mbskip_table[mb]>=1 if MB didn't change
1161 * stride= mb_width = (width+15)>>4
1162 * - encoding: unused
1163 * - decoding: Set by libavcodec.
1165 uint8_t *mbskip_table;
1168 * motion vector table
1171 * int mv_sample_log2= 4 - motion_subsample_log2;
1172 * int mb_width= (width+15)>>4;
1173 * int mv_stride= (mb_width << mv_sample_log2) + 1;
1174 * motion_val[direction][x + y*mv_stride][0->mv_x, 1->mv_y];
1176 * - encoding: Set by user.
1177 * - decoding: Set by libavcodec.
1179 int16_t (*motion_val[2])[2];
1182 * macroblock type table
1183 * mb_type_base + mb_width + 2
1184 * - encoding: Set by user.
1185 * - decoding: Set by libavcodec.
1191 * - encoding: unused
1192 * - decoding: Set by libavcodec.
1197 * motion reference frame index
1198 * the order in which these are stored can depend on the codec.
1199 * - encoding: Set by user.
1200 * - decoding: Set by libavcodec.
1202 int8_t *ref_index[2];
1205 * for some private data of the user
1206 * - encoding: unused
1207 * - decoding: Set by user.
1213 * - encoding: Set by libavcodec. if flags&CODEC_FLAG_PSNR.
1214 * - decoding: unused
1216 uint64_t error[AV_NUM_DATA_POINTERS];
1219 * type of the buffer (to keep track of who has to deallocate data[*])
1220 * - encoding: Set by the one who allocates it.
1221 * - decoding: Set by the one who allocates it.
1222 * Note: User allocated (direct rendering) & internal buffers cannot coexist currently.
1227 * When decoding, this signals how much the picture must be delayed.
1228 * extra_delay = repeat_pict / (2*fps)
1229 * - encoding: unused
1230 * - decoding: Set by libavcodec.
1235 * The content of the picture is interlaced.
1236 * - encoding: Set by user.
1237 * - decoding: Set by libavcodec. (default 0)
1239 int interlaced_frame;
1242 * If the content is interlaced, is top field displayed first.
1243 * - encoding: Set by user.
1244 * - decoding: Set by libavcodec.
1246 int top_field_first;
1249 * Tell user application that palette has changed from previous frame.
1250 * - encoding: ??? (no palette-enabled encoder yet)
1251 * - decoding: Set by libavcodec. (default 0).
1253 int palette_has_changed;
1256 * codec suggestion on buffer type if != 0
1257 * - encoding: unused
1258 * - decoding: Set by libavcodec. (before get_buffer() call)).
1264 * - encoding: Set by user.
1265 * - decoding: Set by libavcodec.
1267 AVPanScan *pan_scan;
1270 * reordered opaque 64bit (generally an integer or a double precision float
1271 * PTS but can be anything).
1272 * The user sets AVCodecContext.reordered_opaque to represent the input at
1274 * the decoder reorders values as needed and sets AVFrame.reordered_opaque
1275 * to exactly one of the values provided by the user through AVCodecContext.reordered_opaque
1276 * @deprecated in favor of pkt_pts
1277 * - encoding: unused
1278 * - decoding: Read by user.
1280 int64_t reordered_opaque;
1283 * hardware accelerator private data (Libav-allocated)
1284 * - encoding: unused
1285 * - decoding: Set by libavcodec
1287 void *hwaccel_picture_private;
1290 * the AVCodecContext which ff_thread_get_buffer() was last called on
1291 * - encoding: Set by libavcodec.
1292 * - decoding: Set by libavcodec.
1294 struct AVCodecContext *owner;
1297 * used by multithreading to store frame-specific info
1298 * - encoding: Set by libavcodec.
1299 * - decoding: Set by libavcodec.
1301 void *thread_opaque;
1304 * log2 of the size of the block which a single vector in motion_val represents:
1305 * (4->16x16, 3->8x8, 2-> 4x4, 1-> 2x2)
1306 * - encoding: unused
1307 * - decoding: Set by libavcodec.
1309 uint8_t motion_subsample_log2;
1312 * Sample rate of the audio data.
1314 * - encoding: unused
1315 * - decoding: set by get_buffer()
1320 * Channel layout of the audio data.
1322 * - encoding: unused
1323 * - decoding: set by get_buffer()
1325 uint64_t channel_layout;
1328 struct AVCodecInternal;
1332 AV_FIELD_PROGRESSIVE,
1333 AV_FIELD_TT, //< Top coded_first, top displayed first
1334 AV_FIELD_BB, //< Bottom coded first, bottom displayed first
1335 AV_FIELD_TB, //< Top coded first, bottom displayed first
1336 AV_FIELD_BT, //< Bottom coded first, top displayed first
1340 * main external API structure.
1341 * New fields can be added to the end with minor version bumps.
1342 * Removal, reordering and changes to existing fields require a major
1344 * sizeof(AVCodecContext) must not be used outside libav*.
1346 typedef struct AVCodecContext {
1348 * information on struct for av_log
1349 * - set by avcodec_alloc_context3
1351 const AVClass *av_class;
1352 int log_level_offset;
1354 enum AVMediaType codec_type; /* see AVMEDIA_TYPE_xxx */
1355 const struct AVCodec *codec;
1356 char codec_name[32];
1357 enum AVCodecID codec_id; /* see AV_CODEC_ID_xxx */
1360 * fourcc (LSB first, so "ABCD" -> ('D'<<24) + ('C'<<16) + ('B'<<8) + 'A').
1361 * This is used to work around some encoder bugs.
1362 * A demuxer should set this to what is stored in the field used to identify the codec.
1363 * If there are multiple such fields in a container then the demuxer should choose the one
1364 * which maximizes the information about the used codec.
1365 * If the codec tag field in a container is larger than 32 bits then the demuxer should
1366 * remap the longer ID to 32 bits with a table or other structure. Alternatively a new
1367 * extra_codec_tag + size could be added but for this a clear advantage must be demonstrated
1369 * - encoding: Set by user, if not then the default based on codec_id will be used.
1370 * - decoding: Set by user, will be converted to uppercase by libavcodec during init.
1372 unsigned int codec_tag;
1375 * fourcc from the AVI stream header (LSB first, so "ABCD" -> ('D'<<24) + ('C'<<16) + ('B'<<8) + 'A').
1376 * This is used to work around some encoder bugs.
1377 * - encoding: unused
1378 * - decoding: Set by user, will be converted to uppercase by libavcodec during init.
1380 unsigned int stream_codec_tag;
1384 * @deprecated this field is unused
1386 attribute_deprecated int sub_id;
1392 * Private context used for internal data.
1394 * Unlike priv_data, this is not codec-specific. It is used in general
1395 * libavcodec functions.
1397 struct AVCodecInternal *internal;
1400 * Private data of the user, can be used to carry app specific stuff.
1401 * - encoding: Set by user.
1402 * - decoding: Set by user.
1407 * the average bitrate
1408 * - encoding: Set by user; unused for constant quantizer encoding.
1409 * - decoding: Set by libavcodec. 0 or some bitrate if this info is available in the stream.
1414 * number of bits the bitstream is allowed to diverge from the reference.
1415 * the reference can be CBR (for CBR pass1) or VBR (for pass2)
1416 * - encoding: Set by user; unused for constant quantizer encoding.
1417 * - decoding: unused
1419 int bit_rate_tolerance;
1422 * Global quality for codecs which cannot change it per frame.
1423 * This should be proportional to MPEG-1/2/4 qscale.
1424 * - encoding: Set by user.
1425 * - decoding: unused
1430 * - encoding: Set by user.
1431 * - decoding: unused
1433 int compression_level;
1434 #define FF_COMPRESSION_DEFAULT -1
1438 * - encoding: Set by user.
1439 * - decoding: Set by user.
1445 * - encoding: Set by user.
1446 * - decoding: Set by user.
1451 * some codecs need / can use extradata like Huffman tables.
1452 * mjpeg: Huffman tables
1453 * rv10: additional flags
1454 * mpeg4: global headers (they can be in the bitstream or here)
1455 * The allocated memory should be FF_INPUT_BUFFER_PADDING_SIZE bytes larger
1456 * than extradata_size to avoid prolems if it is read with the bitstream reader.
1457 * The bytewise contents of extradata must not depend on the architecture or CPU endianness.
1458 * - encoding: Set/allocated/freed by libavcodec.
1459 * - decoding: Set/allocated/freed by user.
1465 * This is the fundamental unit of time (in seconds) in terms
1466 * of which frame timestamps are represented. For fixed-fps content,
1467 * timebase should be 1/framerate and timestamp increments should be
1469 * - encoding: MUST be set by user.
1470 * - decoding: Set by libavcodec.
1472 AVRational time_base;
1475 * For some codecs, the time base is closer to the field rate than the frame rate.
1476 * Most notably, H.264 and MPEG-2 specify time_base as half of frame duration
1477 * if no telecine is used ...
1479 * Set to time_base ticks per frame. Default 1, e.g., H.264/MPEG-2 set it to 2.
1481 int ticks_per_frame;
1487 * Number of frames the decoded output will be delayed relative to the
1491 * For encoding, this is the number of "priming" samples added to the
1492 * beginning of the stream. The decoded output will be delayed by this
1493 * many samples relative to the input to the encoder. Note that this
1494 * field is purely informational and does not directly affect the pts
1495 * output by the encoder, which should always be based on the actual
1496 * presentation time, including any delay.
1497 * For decoding, this is the number of samples the decoder needs to
1498 * output before the decoder's output is valid. When seeking, you should
1499 * start decoding this many samples prior to your desired seek point.
1501 * - encoding: Set by libavcodec.
1502 * - decoding: Set by libavcodec.
1509 * picture width / height.
1510 * - encoding: MUST be set by user.
1511 * - decoding: Set by libavcodec.
1512 * Note: For compatibility it is possible to set this instead of
1513 * coded_width/height before decoding.
1518 * Bitstream width / height, may be different from width/height.
1519 * - encoding: unused
1520 * - decoding: Set by user before init if known. Codec should override / dynamically change if needed.
1522 int coded_width, coded_height;
1524 #define FF_ASPECT_EXTENDED 15
1527 * the number of pictures in a group of pictures, or 0 for intra_only
1528 * - encoding: Set by user.
1529 * - decoding: unused
1534 * Pixel format, see AV_PIX_FMT_xxx.
1535 * May be set by the demuxer if known from headers.
1536 * May be overriden by the decoder if it knows better.
1537 * - encoding: Set by user.
1538 * - decoding: Set by user if known, overridden by libavcodec if known
1540 enum AVPixelFormat pix_fmt;
1543 * Motion estimation algorithm used for video coding.
1544 * 1 (zero), 2 (full), 3 (log), 4 (phods), 5 (epzs), 6 (x1), 7 (hex),
1545 * 8 (umh), 10 (tesa) [7, 8, 10 are x264 specific]
1546 * - encoding: MUST be set by user.
1547 * - decoding: unused
1552 * If non NULL, 'draw_horiz_band' is called by the libavcodec
1553 * decoder to draw a horizontal band. It improves cache usage. Not
1554 * all codecs can do that. You must check the codec capabilities
1556 * When multithreading is used, it may be called from multiple threads
1557 * at the same time; threads might draw different parts of the same AVFrame,
1558 * or multiple AVFrames, and there is no guarantee that slices will be drawn
1560 * The function is also used by hardware acceleration APIs.
1561 * It is called at least once during frame decoding to pass
1562 * the data needed for hardware render.
1563 * In that mode instead of pixel data, AVFrame points to
1564 * a structure specific to the acceleration API. The application
1565 * reads the structure and can change some fields to indicate progress
1567 * - encoding: unused
1568 * - decoding: Set by user.
1569 * @param height the height of the slice
1570 * @param y the y position of the slice
1571 * @param type 1->top field, 2->bottom field, 3->frame
1572 * @param offset offset into the AVFrame.data from which the slice should be read
1574 void (*draw_horiz_band)(struct AVCodecContext *s,
1575 const AVFrame *src, int offset[AV_NUM_DATA_POINTERS],
1576 int y, int type, int height);
1579 * callback to negotiate the pixelFormat
1580 * @param fmt is the list of formats which are supported by the codec,
1581 * it is terminated by -1 as 0 is a valid format, the formats are ordered by quality.
1582 * The first is always the native one.
1583 * @return the chosen format
1584 * - encoding: unused
1585 * - decoding: Set by user, if not set the native format will be chosen.
1587 enum AVPixelFormat (*get_format)(struct AVCodecContext *s, const enum AVPixelFormat * fmt);
1590 * maximum number of B-frames between non-B-frames
1591 * Note: The output will be delayed by max_b_frames+1 relative to the input.
1592 * - encoding: Set by user.
1593 * - decoding: unused
1598 * qscale factor between IP and B-frames
1599 * If > 0 then the last P-frame quantizer will be used (q= lastp_q*factor+offset).
1600 * If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset).
1601 * - encoding: Set by user.
1602 * - decoding: unused
1604 float b_quant_factor;
1606 /** obsolete FIXME remove */
1608 #define FF_RC_STRATEGY_XVID 1
1610 int b_frame_strategy;
1612 #if FF_API_MPV_GLOBAL_OPTS
1614 * luma single coefficient elimination threshold
1615 * - encoding: Set by user.
1616 * - decoding: unused
1618 attribute_deprecated int luma_elim_threshold;
1621 * chroma single coeff elimination threshold
1622 * - encoding: Set by user.
1623 * - decoding: unused
1625 attribute_deprecated int chroma_elim_threshold;
1629 * qscale offset between IP and B-frames
1630 * - encoding: Set by user.
1631 * - decoding: unused
1633 float b_quant_offset;
1636 * Size of the frame reordering buffer in the decoder.
1637 * For MPEG-2 it is 1 IPB or 0 low delay IP.
1638 * - encoding: Set by libavcodec.
1639 * - decoding: Set by libavcodec.
1644 * 0-> h263 quant 1-> mpeg quant
1645 * - encoding: Set by user.
1646 * - decoding: unused
1651 * qscale factor between P and I-frames
1652 * If > 0 then the last p frame quantizer will be used (q= lastp_q*factor+offset).
1653 * If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset).
1654 * - encoding: Set by user.
1655 * - decoding: unused
1657 float i_quant_factor;
1660 * qscale offset between P and I-frames
1661 * - encoding: Set by user.
1662 * - decoding: unused
1664 float i_quant_offset;
1667 * luminance masking (0-> disabled)
1668 * - encoding: Set by user.
1669 * - decoding: unused
1674 * temporary complexity masking (0-> disabled)
1675 * - encoding: Set by user.
1676 * - decoding: unused
1678 float temporal_cplx_masking;
1681 * spatial complexity masking (0-> disabled)
1682 * - encoding: Set by user.
1683 * - decoding: unused
1685 float spatial_cplx_masking;
1688 * p block masking (0-> disabled)
1689 * - encoding: Set by user.
1690 * - decoding: unused
1695 * darkness masking (0-> disabled)
1696 * - encoding: Set by user.
1697 * - decoding: unused
1703 * - encoding: Set by libavcodec.
1704 * - decoding: Set by user (or 0).
1708 * prediction method (needed for huffyuv)
1709 * - encoding: Set by user.
1710 * - decoding: unused
1712 int prediction_method;
1713 #define FF_PRED_LEFT 0
1714 #define FF_PRED_PLANE 1
1715 #define FF_PRED_MEDIAN 2
1718 * slice offsets in the frame in bytes
1719 * - encoding: Set/allocated by libavcodec.
1720 * - decoding: Set/allocated by user (or NULL).
1725 * sample aspect ratio (0 if unknown)
1726 * That is the width of a pixel divided by the height of the pixel.
1727 * Numerator and denominator must be relatively prime and smaller than 256 for some video standards.
1728 * - encoding: Set by user.
1729 * - decoding: Set by libavcodec.
1731 AVRational sample_aspect_ratio;
1734 * motion estimation comparison function
1735 * - encoding: Set by user.
1736 * - decoding: unused
1740 * subpixel motion estimation comparison function
1741 * - encoding: Set by user.
1742 * - decoding: unused
1746 * macroblock comparison function (not supported yet)
1747 * - encoding: Set by user.
1748 * - decoding: unused
1752 * interlaced DCT comparison function
1753 * - encoding: Set by user.
1754 * - decoding: unused
1757 #define FF_CMP_SAD 0
1758 #define FF_CMP_SSE 1
1759 #define FF_CMP_SATD 2
1760 #define FF_CMP_DCT 3
1761 #define FF_CMP_PSNR 4
1762 #define FF_CMP_BIT 5
1764 #define FF_CMP_ZERO 7
1765 #define FF_CMP_VSAD 8
1766 #define FF_CMP_VSSE 9
1767 #define FF_CMP_NSSE 10
1769 #define FF_CMP_W53 11
1770 #define FF_CMP_W97 12
1772 #define FF_CMP_DCTMAX 13
1773 #define FF_CMP_DCT264 14
1774 #define FF_CMP_CHROMA 256
1777 * ME diamond size & shape
1778 * - encoding: Set by user.
1779 * - decoding: unused
1784 * amount of previous MV predictors (2a+1 x 2a+1 square)
1785 * - encoding: Set by user.
1786 * - decoding: unused
1788 int last_predictor_count;
1791 * prepass for motion estimation
1792 * - encoding: Set by user.
1793 * - decoding: unused
1798 * motion estimation prepass comparison function
1799 * - encoding: Set by user.
1800 * - decoding: unused
1805 * ME prepass diamond size & shape
1806 * - encoding: Set by user.
1807 * - decoding: unused
1813 * - encoding: Set by user.
1814 * - decoding: unused
1816 int me_subpel_quality;
1819 * DTG active format information (additional aspect ratio
1820 * information only used in DVB MPEG-2 transport streams)
1823 * - encoding: unused
1824 * - decoding: Set by decoder.
1826 int dtg_active_format;
1827 #define FF_DTG_AFD_SAME 8
1828 #define FF_DTG_AFD_4_3 9
1829 #define FF_DTG_AFD_16_9 10
1830 #define FF_DTG_AFD_14_9 11
1831 #define FF_DTG_AFD_4_3_SP_14_9 13
1832 #define FF_DTG_AFD_16_9_SP_14_9 14
1833 #define FF_DTG_AFD_SP_4_3 15
1836 * maximum motion estimation search range in subpel units
1837 * If 0 then no limit.
1839 * - encoding: Set by user.
1840 * - decoding: unused
1845 * intra quantizer bias
1846 * - encoding: Set by user.
1847 * - decoding: unused
1849 int intra_quant_bias;
1850 #define FF_DEFAULT_QUANT_BIAS 999999
1853 * inter quantizer bias
1854 * - encoding: Set by user.
1855 * - decoding: unused
1857 int inter_quant_bias;
1859 #if FF_API_COLOR_TABLE_ID
1862 * - encoding: unused
1863 * - decoding: Which clrtable should be used for 8bit RGB images.
1864 * Tables have to be stored somewhere. FIXME
1866 attribute_deprecated int color_table_id;
1871 * - encoding: unused
1872 * - decoding: Set by user.
1875 #define SLICE_FLAG_CODED_ORDER 0x0001 ///< draw_horiz_band() is called in coded order instead of display
1876 #define SLICE_FLAG_ALLOW_FIELD 0x0002 ///< allow draw_horiz_band() with field slices (MPEG2 field pics)
1877 #define SLICE_FLAG_ALLOW_PLANE 0x0004 ///< allow draw_horiz_band() with 1 component at a time (SVQ1)
1880 * XVideo Motion Acceleration
1881 * - encoding: forbidden
1882 * - decoding: set by decoder
1884 int xvmc_acceleration;
1887 * macroblock decision mode
1888 * - encoding: Set by user.
1889 * - decoding: unused
1892 #define FF_MB_DECISION_SIMPLE 0 ///< uses mb_cmp
1893 #define FF_MB_DECISION_BITS 1 ///< chooses the one which needs the fewest bits
1894 #define FF_MB_DECISION_RD 2 ///< rate distortion
1897 * custom intra quantization matrix
1898 * - encoding: Set by user, can be NULL.
1899 * - decoding: Set by libavcodec.
1901 uint16_t *intra_matrix;
1904 * custom inter quantization matrix
1905 * - encoding: Set by user, can be NULL.
1906 * - decoding: Set by libavcodec.
1908 uint16_t *inter_matrix;
1911 * scene change detection threshold
1912 * 0 is default, larger means fewer detected scene changes.
1913 * - encoding: Set by user.
1914 * - decoding: unused
1916 int scenechange_threshold;
1919 * noise reduction strength
1920 * - encoding: Set by user.
1921 * - decoding: unused
1923 int noise_reduction;
1925 #if FF_API_INTER_THRESHOLD
1927 * @deprecated this field is unused
1929 attribute_deprecated int inter_threshold;
1932 #if FF_API_MPV_GLOBAL_OPTS
1934 * @deprecated use mpegvideo private options instead
1936 attribute_deprecated int quantizer_noise_shaping;
1940 * Motion estimation threshold below which no motion estimation is
1941 * performed, but instead the user specified motion vectors are used.
1943 * - encoding: Set by user.
1944 * - decoding: unused
1949 * Macroblock threshold below which the user specified macroblock types will be used.
1950 * - encoding: Set by user.
1951 * - decoding: unused
1956 * precision of the intra DC coefficient - 8
1957 * - encoding: Set by user.
1958 * - decoding: unused
1960 int intra_dc_precision;
1963 * Number of macroblock rows at the top which are skipped.
1964 * - encoding: unused
1965 * - decoding: Set by user.
1970 * Number of macroblock rows at the bottom which are skipped.
1971 * - encoding: unused
1972 * - decoding: Set by user.
1977 * Border processing masking, raises the quantizer for mbs on the borders
1979 * - encoding: Set by user.
1980 * - decoding: unused
1982 float border_masking;
1985 * minimum MB lagrange multipler
1986 * - encoding: Set by user.
1987 * - decoding: unused
1992 * maximum MB lagrange multipler
1993 * - encoding: Set by user.
1994 * - decoding: unused
2000 * - encoding: Set by user.
2001 * - decoding: unused
2003 int me_penalty_compensation;
2007 * - encoding: Set by user.
2008 * - decoding: unused
2014 * - encoding: Set by user.
2015 * - decoding: unused
2021 * - encoding: Set by user.
2022 * - decoding: unused
2027 * number of reference frames
2028 * - encoding: Set by user.
2029 * - decoding: Set by lavc.
2034 * chroma qp offset from luma
2035 * - encoding: Set by user.
2036 * - decoding: unused
2041 * Multiplied by qscale for each frame and added to scene_change_score.
2042 * - encoding: Set by user.
2043 * - decoding: unused
2045 int scenechange_factor;
2049 * Note: Value depends upon the compare function used for fullpel ME.
2050 * - encoding: Set by user.
2051 * - decoding: unused
2056 * Adjust sensitivity of b_frame_strategy 1.
2057 * - encoding: Set by user.
2058 * - decoding: unused
2063 * Chromaticity coordinates of the source primaries.
2064 * - encoding: Set by user
2065 * - decoding: Set by libavcodec
2067 enum AVColorPrimaries color_primaries;
2070 * Color Transfer Characteristic.
2071 * - encoding: Set by user
2072 * - decoding: Set by libavcodec
2074 enum AVColorTransferCharacteristic color_trc;
2077 * YUV colorspace type.
2078 * - encoding: Set by user
2079 * - decoding: Set by libavcodec
2081 enum AVColorSpace colorspace;
2084 * MPEG vs JPEG YUV range.
2085 * - encoding: Set by user
2086 * - decoding: Set by libavcodec
2088 enum AVColorRange color_range;
2091 * This defines the location of chroma samples.
2092 * - encoding: Set by user
2093 * - decoding: Set by libavcodec
2095 enum AVChromaLocation chroma_sample_location;
2099 * Indicates number of picture subdivisions. Used for parallelized
2101 * - encoding: Set by user
2102 * - decoding: unused
2107 * - encoding: set by libavcodec
2108 * - decoding: Set by libavcodec
2110 enum AVFieldOrder field_order;
2113 int sample_rate; ///< samples per second
2114 int channels; ///< number of audio channels
2117 * audio sample format
2118 * - encoding: Set by user.
2119 * - decoding: Set by libavcodec.
2121 enum AVSampleFormat sample_fmt; ///< sample format
2123 /* The following data should not be initialized. */
2125 * Number of samples per channel in an audio frame.
2127 * - encoding: set by libavcodec in avcodec_open2(). Each submitted frame
2128 * except the last must contain exactly frame_size samples per channel.
2129 * May be 0 when the codec has CODEC_CAP_VARIABLE_FRAME_SIZE set, then the
2130 * frame size is not restricted.
2131 * - decoding: may be set by some decoders to indicate constant frame size
2136 * Frame counter, set by libavcodec.
2138 * - decoding: total number of frames returned from the decoder so far.
2139 * - encoding: total number of frames passed to the encoder so far.
2141 * @note the counter is not incremented if encoding/decoding resulted in
2147 * number of bytes per packet if constant and known or 0
2148 * Used by some WAV based audio codecs.
2153 * Audio cutoff bandwidth (0 means "automatic")
2154 * - encoding: Set by user.
2155 * - decoding: unused
2159 #if FF_API_REQUEST_CHANNELS
2161 * Decoder should decode to this many channels if it can (0 for default)
2162 * - encoding: unused
2163 * - decoding: Set by user.
2164 * @deprecated Deprecated in favor of request_channel_layout.
2166 int request_channels;
2170 * Audio channel layout.
2171 * - encoding: set by user.
2172 * - decoding: set by libavcodec.
2174 uint64_t channel_layout;
2177 * Request decoder to use this channel layout if it can (0 for default)
2178 * - encoding: unused
2179 * - decoding: Set by user.
2181 uint64_t request_channel_layout;
2184 * Type of service that the audio stream conveys.
2185 * - encoding: Set by user.
2186 * - decoding: Set by libavcodec.
2188 enum AVAudioServiceType audio_service_type;
2191 * Used to request a sample format from the decoder.
2192 * - encoding: unused.
2193 * - decoding: Set by user.
2195 enum AVSampleFormat request_sample_fmt;
2198 * Called at the beginning of each frame to get a buffer for it.
2200 * The function will set AVFrame.data[], AVFrame.linesize[].
2201 * AVFrame.extended_data[] must also be set, but it should be the same as
2202 * AVFrame.data[] except for planar audio with more channels than can fit
2203 * in AVFrame.data[]. In that case, AVFrame.data[] shall still contain as
2204 * many data pointers as it can hold.
2206 * if CODEC_CAP_DR1 is not set then get_buffer() must call
2207 * avcodec_default_get_buffer() instead of providing buffers allocated by
2210 * AVFrame.data[] should be 32- or 16-byte-aligned unless the CPU doesn't
2211 * need it. avcodec_default_get_buffer() aligns the output buffer properly,
2212 * but if get_buffer() is overridden then alignment considerations should
2213 * be taken into account.
2215 * @see avcodec_default_get_buffer()
2219 * If pic.reference is set then the frame will be read later by libavcodec.
2220 * avcodec_align_dimensions2() should be used to find the required width and
2221 * height, as they normally need to be rounded up to the next multiple of 16.
2223 * If frame multithreading is used and thread_safe_callbacks is set,
2224 * it may be called from a different thread, but not from more than one at
2225 * once. Does not need to be reentrant.
2227 * @see release_buffer(), reget_buffer()
2228 * @see avcodec_align_dimensions2()
2232 * Decoders request a buffer of a particular size by setting
2233 * AVFrame.nb_samples prior to calling get_buffer(). The decoder may,
2234 * however, utilize only part of the buffer by setting AVFrame.nb_samples
2235 * to a smaller value in the output frame.
2237 * Decoders cannot use the buffer after returning from
2238 * avcodec_decode_audio4(), so they will not call release_buffer(), as it
2239 * is assumed to be released immediately upon return. In some rare cases,
2240 * a decoder may need to call get_buffer() more than once in a single
2241 * call to avcodec_decode_audio4(). In that case, when get_buffer() is
2242 * called again after it has already been called once, the previously
2243 * acquired buffer is assumed to be released at that time and may not be
2244 * reused by the decoder.
2246 * As a convenience, av_samples_get_buffer_size() and
2247 * av_samples_fill_arrays() in libavutil may be used by custom get_buffer()
2248 * functions to find the required data size and to fill data pointers and
2249 * linesize. In AVFrame.linesize, only linesize[0] may be set for audio
2250 * since all planes must be the same size.
2252 * @see av_samples_get_buffer_size(), av_samples_fill_arrays()
2254 * - encoding: unused
2255 * - decoding: Set by libavcodec, user can override.
2257 int (*get_buffer)(struct AVCodecContext *c, AVFrame *pic);
2260 * Called to release buffers which were allocated with get_buffer.
2261 * A released buffer can be reused in get_buffer().
2262 * pic.data[*] must be set to NULL.
2263 * May be called from a different thread if frame multithreading is used,
2264 * but not by more than one thread at once, so does not need to be reentrant.
2265 * - encoding: unused
2266 * - decoding: Set by libavcodec, user can override.
2268 void (*release_buffer)(struct AVCodecContext *c, AVFrame *pic);
2271 * Called at the beginning of a frame to get cr buffer for it.
2272 * Buffer type (size, hints) must be the same. libavcodec won't check it.
2273 * libavcodec will pass previous buffer in pic, function should return
2274 * same buffer or new buffer with old frame "painted" into it.
2275 * If pic.data[0] == NULL must behave like get_buffer().
2276 * if CODEC_CAP_DR1 is not set then reget_buffer() must call
2277 * avcodec_default_reget_buffer() instead of providing buffers allocated by
2279 * - encoding: unused
2280 * - decoding: Set by libavcodec, user can override.
2282 int (*reget_buffer)(struct AVCodecContext *c, AVFrame *pic);
2285 /* - encoding parameters */
2286 float qcompress; ///< amount of qscale change between easy & hard scenes (0.0-1.0)
2287 float qblur; ///< amount of qscale smoothing over time (0.0-1.0)
2291 * - encoding: Set by user.
2292 * - decoding: unused
2298 * - encoding: Set by user.
2299 * - decoding: unused
2304 * maximum quantizer difference between frames
2305 * - encoding: Set by user.
2306 * - decoding: unused
2311 * ratecontrol qmin qmax limiting method
2312 * 0-> clipping, 1-> use a nice continuous function to limit qscale wthin qmin/qmax.
2313 * - encoding: Set by user.
2314 * - decoding: unused
2322 * decoder bitstream buffer size
2323 * - encoding: Set by user.
2324 * - decoding: unused
2329 * ratecontrol override, see RcOverride
2330 * - encoding: Allocated/set/freed by user.
2331 * - decoding: unused
2333 int rc_override_count;
2334 RcOverride *rc_override;
2337 * rate control equation
2338 * - encoding: Set by user
2339 * - decoding: unused
2345 * - encoding: Set by user.
2346 * - decoding: unused
2352 * - encoding: Set by user.
2353 * - decoding: unused
2357 float rc_buffer_aggressivity;
2360 * initial complexity for pass1 ratecontrol
2361 * - encoding: Set by user.
2362 * - decoding: unused
2364 float rc_initial_cplx;
2367 * Ratecontrol attempt to use, at maximum, <value> of what can be used without an underflow.
2368 * - encoding: Set by user.
2369 * - decoding: unused.
2371 float rc_max_available_vbv_use;
2374 * Ratecontrol attempt to use, at least, <value> times the amount needed to prevent a vbv overflow.
2375 * - encoding: Set by user.
2376 * - decoding: unused.
2378 float rc_min_vbv_overflow_use;
2381 * Number of bits which should be loaded into the rc buffer before decoding starts.
2382 * - encoding: Set by user.
2383 * - decoding: unused
2385 int rc_initial_buffer_occupancy;
2387 #define FF_CODER_TYPE_VLC 0
2388 #define FF_CODER_TYPE_AC 1
2389 #define FF_CODER_TYPE_RAW 2
2390 #define FF_CODER_TYPE_RLE 3
2391 #define FF_CODER_TYPE_DEFLATE 4
2394 * - encoding: Set by user.
2395 * - decoding: unused
2401 * - encoding: Set by user.
2402 * - decoding: unused
2407 * minimum Lagrange multipler
2408 * - encoding: Set by user.
2409 * - decoding: unused
2414 * maximum Lagrange multipler
2415 * - encoding: Set by user.
2416 * - decoding: unused
2421 * frame skip threshold
2422 * - encoding: Set by user.
2423 * - decoding: unused
2425 int frame_skip_threshold;
2429 * - encoding: Set by user.
2430 * - decoding: unused
2432 int frame_skip_factor;
2435 * frame skip exponent
2436 * - encoding: Set by user.
2437 * - decoding: unused
2442 * frame skip comparison function
2443 * - encoding: Set by user.
2444 * - decoding: unused
2449 * trellis RD quantization
2450 * - encoding: Set by user.
2451 * - decoding: unused
2456 * - encoding: Set by user.
2457 * - decoding: unused
2459 int min_prediction_order;
2462 * - encoding: Set by user.
2463 * - decoding: unused
2465 int max_prediction_order;
2468 * GOP timecode frame start number, in non drop frame format
2469 * - encoding: Set by user.
2470 * - decoding: unused
2472 int64_t timecode_frame_start;
2474 /* The RTP callback: This function is called */
2475 /* every time the encoder has a packet to send. */
2476 /* It depends on the encoder if the data starts */
2477 /* with a Start Code (it should). H.263 does. */
2478 /* mb_nb contains the number of macroblocks */
2479 /* encoded in the RTP payload. */
2480 void (*rtp_callback)(struct AVCodecContext *avctx, void *data, int size, int mb_nb);
2482 int rtp_payload_size; /* The size of the RTP payload: the coder will */
2483 /* do its best to deliver a chunk with size */
2484 /* below rtp_payload_size, the chunk will start */
2485 /* with a start code on some codecs like H.263. */
2486 /* This doesn't take account of any particular */
2487 /* headers inside the transmitted RTP payload. */
2489 /* statistics, used for 2-pass encoding */
2500 * number of bits used for the previously encoded frame
2501 * - encoding: Set by libavcodec.
2502 * - decoding: unused
2507 * pass1 encoding statistics output buffer
2508 * - encoding: Set by libavcodec.
2509 * - decoding: unused
2514 * pass2 encoding statistics input buffer
2515 * Concatenated stuff from stats_out of pass1 should be placed here.
2516 * - encoding: Allocated/set/freed by user.
2517 * - decoding: unused
2522 * Work around bugs in encoders which sometimes cannot be detected automatically.
2523 * - encoding: Set by user
2524 * - decoding: Set by user
2526 int workaround_bugs;
2527 #define FF_BUG_AUTODETECT 1 ///< autodetection
2528 #define FF_BUG_OLD_MSMPEG4 2
2529 #define FF_BUG_XVID_ILACE 4
2530 #define FF_BUG_UMP4 8
2531 #define FF_BUG_NO_PADDING 16
2532 #define FF_BUG_AMV 32
2533 #define FF_BUG_AC_VLC 0 ///< Will be removed, libavcodec can now handle these non-compliant files by default.
2534 #define FF_BUG_QPEL_CHROMA 64
2535 #define FF_BUG_STD_QPEL 128
2536 #define FF_BUG_QPEL_CHROMA2 256
2537 #define FF_BUG_DIRECT_BLOCKSIZE 512
2538 #define FF_BUG_EDGE 1024
2539 #define FF_BUG_HPEL_CHROMA 2048
2540 #define FF_BUG_DC_CLIP 4096
2541 #define FF_BUG_MS 8192 ///< Work around various bugs in Microsoft's broken decoders.
2542 #define FF_BUG_TRUNCATED 16384
2545 * strictly follow the standard (MPEG4, ...).
2546 * - encoding: Set by user.
2547 * - decoding: Set by user.
2548 * Setting this to STRICT or higher means the encoder and decoder will
2549 * generally do stupid things, whereas setting it to unofficial or lower
2550 * will mean the encoder might produce output that is not supported by all
2551 * spec-compliant decoders. Decoders don't differentiate between normal,
2552 * unofficial and experimental (that is, they always try to decode things
2553 * when they can) unless they are explicitly asked to behave stupidly
2554 * (=strictly conform to the specs)
2556 int strict_std_compliance;
2557 #define FF_COMPLIANCE_VERY_STRICT 2 ///< Strictly conform to an older more strict version of the spec or reference software.
2558 #define FF_COMPLIANCE_STRICT 1 ///< Strictly conform to all the things in the spec no matter what consequences.
2559 #define FF_COMPLIANCE_NORMAL 0
2560 #define FF_COMPLIANCE_UNOFFICIAL -1 ///< Allow unofficial extensions
2561 #define FF_COMPLIANCE_EXPERIMENTAL -2 ///< Allow nonstandardized experimental things.
2564 * error concealment flags
2565 * - encoding: unused
2566 * - decoding: Set by user.
2568 int error_concealment;
2569 #define FF_EC_GUESS_MVS 1
2570 #define FF_EC_DEBLOCK 2
2574 * - encoding: Set by user.
2575 * - decoding: Set by user.
2578 #define FF_DEBUG_PICT_INFO 1
2579 #define FF_DEBUG_RC 2
2580 #define FF_DEBUG_BITSTREAM 4
2581 #define FF_DEBUG_MB_TYPE 8
2582 #define FF_DEBUG_QP 16
2583 #define FF_DEBUG_MV 32
2584 #define FF_DEBUG_DCT_COEFF 0x00000040
2585 #define FF_DEBUG_SKIP 0x00000080
2586 #define FF_DEBUG_STARTCODE 0x00000100
2587 #define FF_DEBUG_PTS 0x00000200
2588 #define FF_DEBUG_ER 0x00000400
2589 #define FF_DEBUG_MMCO 0x00000800
2590 #define FF_DEBUG_BUGS 0x00001000
2591 #define FF_DEBUG_VIS_QP 0x00002000
2592 #define FF_DEBUG_VIS_MB_TYPE 0x00004000
2593 #define FF_DEBUG_BUFFERS 0x00008000
2594 #define FF_DEBUG_THREADS 0x00010000
2598 * - encoding: Set by user.
2599 * - decoding: Set by user.
2602 #define FF_DEBUG_VIS_MV_P_FOR 0x00000001 //visualize forward predicted MVs of P frames
2603 #define FF_DEBUG_VIS_MV_B_FOR 0x00000002 //visualize forward predicted MVs of B frames
2604 #define FF_DEBUG_VIS_MV_B_BACK 0x00000004 //visualize backward predicted MVs of B frames
2607 * Error recognition; may misdetect some more or less valid parts as errors.
2608 * - encoding: unused
2609 * - decoding: Set by user.
2611 int err_recognition;
2612 #define AV_EF_CRCCHECK (1<<0)
2613 #define AV_EF_BITSTREAM (1<<1)
2614 #define AV_EF_BUFFER (1<<2)
2615 #define AV_EF_EXPLODE (1<<3)
2618 * opaque 64bit number (generally a PTS) that will be reordered and
2619 * output in AVFrame.reordered_opaque
2620 * @deprecated in favor of pkt_pts
2621 * - encoding: unused
2622 * - decoding: Set by user.
2624 int64_t reordered_opaque;
2627 * Hardware accelerator in use
2628 * - encoding: unused.
2629 * - decoding: Set by libavcodec
2631 struct AVHWAccel *hwaccel;
2634 * Hardware accelerator context.
2635 * For some hardware accelerators, a global context needs to be
2636 * provided by the user. In that case, this holds display-dependent
2637 * data Libav cannot instantiate itself. Please refer to the
2638 * Libav HW accelerator documentation to know how to fill this
2639 * is. e.g. for VA API, this is a struct vaapi_context.
2640 * - encoding: unused
2641 * - decoding: Set by user
2643 void *hwaccel_context;
2647 * - encoding: Set by libavcodec if flags&CODEC_FLAG_PSNR.
2648 * - decoding: unused
2650 uint64_t error[AV_NUM_DATA_POINTERS];
2653 * DCT algorithm, see FF_DCT_* below
2654 * - encoding: Set by user.
2655 * - decoding: unused
2658 #define FF_DCT_AUTO 0
2659 #define FF_DCT_FASTINT 1
2660 #define FF_DCT_INT 2
2661 #define FF_DCT_MMX 3
2662 #define FF_DCT_ALTIVEC 5
2663 #define FF_DCT_FAAN 6
2666 * IDCT algorithm, see FF_IDCT_* below.
2667 * - encoding: Set by user.
2668 * - decoding: Set by user.
2671 #define FF_IDCT_AUTO 0
2672 #define FF_IDCT_INT 1
2673 #define FF_IDCT_SIMPLE 2
2674 #define FF_IDCT_SIMPLEMMX 3
2676 #define FF_IDCT_LIBMPEG2MMX 4
2679 #define FF_IDCT_MMI 5
2681 #define FF_IDCT_ARM 7
2682 #define FF_IDCT_ALTIVEC 8
2683 #define FF_IDCT_SH4 9
2684 #define FF_IDCT_SIMPLEARM 10
2685 #define FF_IDCT_IPP 13
2686 #define FF_IDCT_XVIDMMX 14
2687 #define FF_IDCT_SIMPLEARMV5TE 16
2688 #define FF_IDCT_SIMPLEARMV6 17
2689 #define FF_IDCT_SIMPLEVIS 18
2690 #define FF_IDCT_FAAN 20
2691 #define FF_IDCT_SIMPLENEON 22
2692 #define FF_IDCT_SIMPLEALPHA 23
2694 #define FF_IDCT_H264 11
2695 #define FF_IDCT_VP3 12
2696 #define FF_IDCT_CAVS 15
2697 #define FF_IDCT_WMV2 19
2698 #define FF_IDCT_EA 21
2699 #define FF_IDCT_BINK 24
2705 * @deprecated use av_set_cpu_flags_mask() instead.
2707 attribute_deprecated unsigned dsp_mask;
2711 * bits per sample/pixel from the demuxer (needed for huffyuv).
2712 * - encoding: Set by libavcodec.
2713 * - decoding: Set by user.
2715 int bits_per_coded_sample;
2718 * Bits per sample/pixel of internal libavcodec pixel/sample format.
2719 * - encoding: set by user.
2720 * - decoding: set by libavcodec.
2722 int bits_per_raw_sample;
2725 * low resolution decoding, 1-> 1/2 size, 2->1/4 size
2726 * - encoding: unused
2727 * - decoding: Set by user.
2729 attribute_deprecated int lowres;
2732 * the picture in the bitstream
2733 * - encoding: Set by libavcodec.
2734 * - decoding: Set by libavcodec.
2736 AVFrame *coded_frame;
2740 * is used to decide how many independent tasks should be passed to execute()
2741 * - encoding: Set by user.
2742 * - decoding: Set by user.
2747 * Which multithreading methods to use.
2748 * Use of FF_THREAD_FRAME will increase decoding delay by one frame per thread,
2749 * so clients which cannot provide future frames should not use it.
2751 * - encoding: Set by user, otherwise the default is used.
2752 * - decoding: Set by user, otherwise the default is used.
2755 #define FF_THREAD_FRAME 1 ///< Decode more than one frame at once
2756 #define FF_THREAD_SLICE 2 ///< Decode more than one part of a single frame at once
2759 * Which multithreading methods are in use by the codec.
2760 * - encoding: Set by libavcodec.
2761 * - decoding: Set by libavcodec.
2763 int active_thread_type;
2766 * Set by the client if its custom get_buffer() callback can be called
2767 * synchronously from another thread, which allows faster multithreaded decoding.
2768 * draw_horiz_band() will be called from other threads regardless of this setting.
2769 * Ignored if the default get_buffer() is used.
2770 * - encoding: Set by user.
2771 * - decoding: Set by user.
2773 int thread_safe_callbacks;
2776 * The codec may call this to execute several independent things.
2777 * It will return only after finishing all tasks.
2778 * The user may replace this with some multithreaded implementation,
2779 * the default implementation will execute the parts serially.
2780 * @param count the number of things to execute
2781 * - encoding: Set by libavcodec, user can override.
2782 * - decoding: Set by libavcodec, user can override.
2784 int (*execute)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg), void *arg2, int *ret, int count, int size);
2787 * The codec may call this to execute several independent things.
2788 * It will return only after finishing all tasks.
2789 * The user may replace this with some multithreaded implementation,
2790 * the default implementation will execute the parts serially.
2791 * Also see avcodec_thread_init and e.g. the --enable-pthread configure option.
2792 * @param c context passed also to func
2793 * @param count the number of things to execute
2794 * @param arg2 argument passed unchanged to func
2795 * @param ret return values of executed functions, must have space for "count" values. May be NULL.
2796 * @param func function that will be called count times, with jobnr from 0 to count-1.
2797 * threadnr will be in the range 0 to c->thread_count-1 < MAX_THREADS and so that no
2798 * two instances of func executing at the same time will have the same threadnr.
2799 * @return always 0 currently, but code should handle a future improvement where when any call to func
2800 * returns < 0 no further calls to func may be done and < 0 is returned.
2801 * - encoding: Set by libavcodec, user can override.
2802 * - decoding: Set by libavcodec, user can override.
2804 int (*execute2)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg, int jobnr, int threadnr), void *arg2, int *ret, int count);
2808 * Can be used by execute() to store some per AVCodecContext stuff.
2809 * - encoding: set by execute()
2810 * - decoding: set by execute()
2812 void *thread_opaque;
2815 * noise vs. sse weight for the nsse comparsion function
2816 * - encoding: Set by user.
2817 * - decoding: unused
2823 * - encoding: Set by user.
2824 * - decoding: Set by libavcodec.
2827 #define FF_PROFILE_UNKNOWN -99
2828 #define FF_PROFILE_RESERVED -100
2830 #define FF_PROFILE_AAC_MAIN 0
2831 #define FF_PROFILE_AAC_LOW 1
2832 #define FF_PROFILE_AAC_SSR 2
2833 #define FF_PROFILE_AAC_LTP 3
2834 #define FF_PROFILE_AAC_HE 4
2835 #define FF_PROFILE_AAC_HE_V2 28
2836 #define FF_PROFILE_AAC_LD 22
2837 #define FF_PROFILE_AAC_ELD 38
2839 #define FF_PROFILE_DTS 20
2840 #define FF_PROFILE_DTS_ES 30
2841 #define FF_PROFILE_DTS_96_24 40
2842 #define FF_PROFILE_DTS_HD_HRA 50
2843 #define FF_PROFILE_DTS_HD_MA 60
2845 #define FF_PROFILE_MPEG2_422 0
2846 #define FF_PROFILE_MPEG2_HIGH 1
2847 #define FF_PROFILE_MPEG2_SS 2
2848 #define FF_PROFILE_MPEG2_SNR_SCALABLE 3
2849 #define FF_PROFILE_MPEG2_MAIN 4
2850 #define FF_PROFILE_MPEG2_SIMPLE 5
2852 #define FF_PROFILE_H264_CONSTRAINED (1<<9) // 8+1; constraint_set1_flag
2853 #define FF_PROFILE_H264_INTRA (1<<11) // 8+3; constraint_set3_flag
2855 #define FF_PROFILE_H264_BASELINE 66
2856 #define FF_PROFILE_H264_CONSTRAINED_BASELINE (66|FF_PROFILE_H264_CONSTRAINED)
2857 #define FF_PROFILE_H264_MAIN 77
2858 #define FF_PROFILE_H264_EXTENDED 88
2859 #define FF_PROFILE_H264_HIGH 100
2860 #define FF_PROFILE_H264_HIGH_10 110
2861 #define FF_PROFILE_H264_HIGH_10_INTRA (110|FF_PROFILE_H264_INTRA)
2862 #define FF_PROFILE_H264_HIGH_422 122
2863 #define FF_PROFILE_H264_HIGH_422_INTRA (122|FF_PROFILE_H264_INTRA)
2864 #define FF_PROFILE_H264_HIGH_444 144
2865 #define FF_PROFILE_H264_HIGH_444_PREDICTIVE 244
2866 #define FF_PROFILE_H264_HIGH_444_INTRA (244|FF_PROFILE_H264_INTRA)
2867 #define FF_PROFILE_H264_CAVLC_444 44
2869 #define FF_PROFILE_VC1_SIMPLE 0
2870 #define FF_PROFILE_VC1_MAIN 1
2871 #define FF_PROFILE_VC1_COMPLEX 2
2872 #define FF_PROFILE_VC1_ADVANCED 3
2874 #define FF_PROFILE_MPEG4_SIMPLE 0
2875 #define FF_PROFILE_MPEG4_SIMPLE_SCALABLE 1
2876 #define FF_PROFILE_MPEG4_CORE 2
2877 #define FF_PROFILE_MPEG4_MAIN 3
2878 #define FF_PROFILE_MPEG4_N_BIT 4
2879 #define FF_PROFILE_MPEG4_SCALABLE_TEXTURE 5
2880 #define FF_PROFILE_MPEG4_SIMPLE_FACE_ANIMATION 6
2881 #define FF_PROFILE_MPEG4_BASIC_ANIMATED_TEXTURE 7
2882 #define FF_PROFILE_MPEG4_HYBRID 8
2883 #define FF_PROFILE_MPEG4_ADVANCED_REAL_TIME 9
2884 #define FF_PROFILE_MPEG4_CORE_SCALABLE 10
2885 #define FF_PROFILE_MPEG4_ADVANCED_CODING 11
2886 #define FF_PROFILE_MPEG4_ADVANCED_CORE 12
2887 #define FF_PROFILE_MPEG4_ADVANCED_SCALABLE_TEXTURE 13
2888 #define FF_PROFILE_MPEG4_SIMPLE_STUDIO 14
2889 #define FF_PROFILE_MPEG4_ADVANCED_SIMPLE 15
2893 * - encoding: Set by user.
2894 * - decoding: Set by libavcodec.
2897 #define FF_LEVEL_UNKNOWN -99
2901 * - encoding: unused
2902 * - decoding: Set by user.
2904 enum AVDiscard skip_loop_filter;
2908 * - encoding: unused
2909 * - decoding: Set by user.
2911 enum AVDiscard skip_idct;
2915 * - encoding: unused
2916 * - decoding: Set by user.
2918 enum AVDiscard skip_frame;
2921 * Header containing style information for text subtitles.
2922 * For SUBTITLE_ASS subtitle type, it should contain the whole ASS
2923 * [Script Info] and [V4+ Styles] section, plus the [Events] line and
2924 * the Format line following. It shouldn't include any Dialogue line.
2925 * - encoding: Set/allocated/freed by user (before avcodec_open2())
2926 * - decoding: Set/allocated/freed by libavcodec (by avcodec_open2())
2928 uint8_t *subtitle_header;
2929 int subtitle_header_size;
2932 * Simulates errors in the bitstream to test error concealment.
2933 * - encoding: Set by user.
2934 * - decoding: unused
2939 * Current packet as passed into the decoder, to avoid having
2940 * to pass the packet into every function. Currently only valid
2941 * inside lavc and get/release_buffer callbacks.
2942 * - decoding: set by avcodec_decode_*, read by get_buffer() for setting pkt_pts
2943 * - encoding: unused
2948 * VBV delay coded in the last frame (in periods of a 27 MHz clock).
2949 * Used for compliant TS muxing.
2950 * - encoding: Set by libavcodec.
2951 * - decoding: unused.
2959 typedef struct AVProfile {
2961 const char *name; ///< short name for the profile
2964 typedef struct AVCodecDefault AVCodecDefault;
2971 typedef struct AVCodec {
2973 * Name of the codec implementation.
2974 * The name is globally unique among encoders and among decoders (but an
2975 * encoder and a decoder can share the same name).
2976 * This is the primary way to find a codec from the user perspective.
2980 * Descriptive name for the codec, meant to be more human readable than name.
2981 * You should use the NULL_IF_CONFIG_SMALL() macro to define it.
2983 const char *long_name;
2984 enum AVMediaType type;
2987 * Codec capabilities.
2991 const AVRational *supported_framerates; ///< array of supported framerates, or NULL if any, array is terminated by {0,0}
2992 const enum AVPixelFormat *pix_fmts; ///< array of supported pixel formats, or NULL if unknown, array is terminated by -1
2993 const int *supported_samplerates; ///< array of supported audio samplerates, or NULL if unknown, array is terminated by 0
2994 const enum AVSampleFormat *sample_fmts; ///< array of supported sample formats, or NULL if unknown, array is terminated by -1
2995 const uint64_t *channel_layouts; ///< array of support channel layouts, or NULL if unknown. array is terminated by 0
2996 attribute_deprecated uint8_t max_lowres; ///< maximum value for lowres supported by the decoder
2997 const AVClass *priv_class; ///< AVClass for the private context
2998 const AVProfile *profiles; ///< array of recognized profiles, or NULL if unknown, array is terminated by {FF_PROFILE_UNKNOWN}
3000 /*****************************************************************
3001 * No fields below this line are part of the public API. They
3002 * may not be used outside of libavcodec and can be changed and
3004 * New public fields should be added right above.
3005 *****************************************************************
3008 struct AVCodec *next;
3010 * @name Frame-level threading support functions
3014 * If defined, called on thread contexts when they are created.
3015 * If the codec allocates writable tables in init(), re-allocate them here.
3016 * priv_data will be set to a copy of the original.
3018 int (*init_thread_copy)(AVCodecContext *);
3020 * Copy necessary context variables from a previous thread context to the current one.
3021 * If not defined, the next thread will start automatically; otherwise, the codec
3022 * must call ff_thread_finish_setup().
3024 * dst and src will (rarely) point to the same context, in which case memcpy should be skipped.
3026 int (*update_thread_context)(AVCodecContext *dst, const AVCodecContext *src);
3030 * Private codec-specific defaults.
3032 const AVCodecDefault *defaults;
3035 * Initialize codec static data, called from avcodec_register().
3037 void (*init_static_data)(struct AVCodec *codec);
3039 int (*init)(AVCodecContext *);
3040 int (*encode_sub)(AVCodecContext *, uint8_t *buf, int buf_size,
3041 const struct AVSubtitle *sub);
3043 * Encode data to an AVPacket.
3045 * @param avctx codec context
3046 * @param avpkt output AVPacket (may contain a user-provided buffer)
3047 * @param[in] frame AVFrame containing the raw data to be encoded
3048 * @param[out] got_packet_ptr encoder sets to 0 or 1 to indicate that a
3049 * non-empty packet was returned in avpkt.
3050 * @return 0 on success, negative error code on failure
3052 int (*encode2)(AVCodecContext *avctx, AVPacket *avpkt, const AVFrame *frame,
3053 int *got_packet_ptr);
3054 int (*decode)(AVCodecContext *, void *outdata, int *outdata_size, AVPacket *avpkt);
3055 int (*close)(AVCodecContext *);
3058 * Will be called when seeking
3060 void (*flush)(AVCodecContext *);
3066 typedef struct AVHWAccel {
3068 * Name of the hardware accelerated codec.
3069 * The name is globally unique among encoders and among decoders (but an
3070 * encoder and a decoder can share the same name).
3075 * Type of codec implemented by the hardware accelerator.
3077 * See AVMEDIA_TYPE_xxx
3079 enum AVMediaType type;
3082 * Codec implemented by the hardware accelerator.
3084 * See AV_CODEC_ID_xxx
3089 * Supported pixel format.
3091 * Only hardware accelerated formats are supported here.
3093 enum AVPixelFormat pix_fmt;
3096 * Hardware accelerated codec capabilities.
3097 * see FF_HWACCEL_CODEC_CAP_*
3101 struct AVHWAccel *next;
3104 * Called at the beginning of each frame or field picture.
3106 * Meaningful frame information (codec specific) is guaranteed to
3107 * be parsed at this point. This function is mandatory.
3109 * Note that buf can be NULL along with buf_size set to 0.
3110 * Otherwise, this means the whole frame is available at this point.
3112 * @param avctx the codec context
3113 * @param buf the frame data buffer base
3114 * @param buf_size the size of the frame in bytes
3115 * @return zero if successful, a negative value otherwise
3117 int (*start_frame)(AVCodecContext *avctx, const uint8_t *buf, uint32_t buf_size);
3120 * Callback for each slice.
3122 * Meaningful slice information (codec specific) is guaranteed to
3123 * be parsed at this point. This function is mandatory.
3125 * @param avctx the codec context
3126 * @param buf the slice data buffer base
3127 * @param buf_size the size of the slice in bytes
3128 * @return zero if successful, a negative value otherwise
3130 int (*decode_slice)(AVCodecContext *avctx, const uint8_t *buf, uint32_t buf_size);
3133 * Called at the end of each frame or field picture.
3135 * The whole picture is parsed at this point and can now be sent
3136 * to the hardware accelerator. This function is mandatory.
3138 * @param avctx the codec context
3139 * @return zero if successful, a negative value otherwise
3141 int (*end_frame)(AVCodecContext *avctx);
3144 * Size of HW accelerator private data.
3146 * Private data is allocated with av_mallocz() before
3147 * AVCodecContext.get_buffer() and deallocated after
3148 * AVCodecContext.release_buffer().
3154 * @defgroup lavc_picture AVPicture
3156 * Functions for working with AVPicture
3161 * four components are given, that's all.
3162 * the last component is alpha
3164 typedef struct AVPicture {
3165 uint8_t *data[AV_NUM_DATA_POINTERS];
3166 int linesize[AV_NUM_DATA_POINTERS]; ///< number of bytes per line
3173 #define AVPALETTE_SIZE 1024
3174 #define AVPALETTE_COUNT 256
3176 enum AVSubtitleType {
3179 SUBTITLE_BITMAP, ///< A bitmap, pict will be set
3182 * Plain text, the text field must be set by the decoder and is
3183 * authoritative. ass and pict fields may contain approximations.
3188 * Formatted text, the ass field must be set by the decoder and is
3189 * authoritative. pict and text fields may contain approximations.
3194 #define AV_SUBTITLE_FLAG_FORCED 0x00000001
3196 typedef struct AVSubtitleRect {
3197 int x; ///< top left corner of pict, undefined when pict is not set
3198 int y; ///< top left corner of pict, undefined when pict is not set
3199 int w; ///< width of pict, undefined when pict is not set
3200 int h; ///< height of pict, undefined when pict is not set
3201 int nb_colors; ///< number of colors in pict, undefined when pict is not set
3204 * data+linesize for the bitmap of this subtitle.
3205 * can be set for text/ass as well once they where rendered
3208 enum AVSubtitleType type;
3210 char *text; ///< 0 terminated plain UTF-8 text
3213 * 0 terminated ASS/SSA compatible event line.
3214 * The pressentation of this is unaffected by the other values in this
3221 typedef struct AVSubtitle {
3222 uint16_t format; /* 0 = graphics */
3223 uint32_t start_display_time; /* relative to packet pts, in ms */
3224 uint32_t end_display_time; /* relative to packet pts, in ms */
3226 AVSubtitleRect **rects;
3227 int64_t pts; ///< Same as packet pts, in AV_TIME_BASE
3231 * If c is NULL, returns the first registered codec,
3232 * if c is non-NULL, returns the next registered codec after c,
3233 * or NULL if c is the last one.
3235 AVCodec *av_codec_next(const AVCodec *c);
3238 * Return the LIBAVCODEC_VERSION_INT constant.
3240 unsigned avcodec_version(void);
3243 * Return the libavcodec build-time configuration.
3245 const char *avcodec_configuration(void);
3248 * Return the libavcodec license.
3250 const char *avcodec_license(void);
3253 * Register the codec codec and initialize libavcodec.
3255 * @warning either this function or avcodec_register_all() must be called
3256 * before any other libavcodec functions.
3258 * @see avcodec_register_all()
3260 void avcodec_register(AVCodec *codec);
3263 * Register all the codecs, parsers and bitstream filters which were enabled at
3264 * configuration time. If you do not call this function you can select exactly
3265 * which formats you want to support, by using the individual registration
3268 * @see avcodec_register
3269 * @see av_register_codec_parser
3270 * @see av_register_bitstream_filter
3272 void avcodec_register_all(void);
3275 * Allocate an AVCodecContext and set its fields to default values. The
3276 * resulting struct can be deallocated by calling avcodec_close() on it followed
3279 * @param codec if non-NULL, allocate private data and initialize defaults
3280 * for the given codec. It is illegal to then call avcodec_open2()
3281 * with a different codec.
3282 * If NULL, then the codec-specific defaults won't be initialized,
3283 * which may result in suboptimal default settings (this is
3284 * important mainly for encoders, e.g. libx264).
3286 * @return An AVCodecContext filled with default values or NULL on failure.
3287 * @see avcodec_get_context_defaults
3289 AVCodecContext *avcodec_alloc_context3(const AVCodec *codec);
3292 * Set the fields of the given AVCodecContext to default values corresponding
3293 * to the given codec (defaults may be codec-dependent).
3295 * Do not call this function if a non-NULL codec has been passed
3296 * to avcodec_alloc_context3() that allocated this AVCodecContext.
3297 * If codec is non-NULL, it is illegal to call avcodec_open2() with a
3298 * different codec on this AVCodecContext.
3300 int avcodec_get_context_defaults3(AVCodecContext *s, const AVCodec *codec);
3303 * Get the AVClass for AVCodecContext. It can be used in combination with
3304 * AV_OPT_SEARCH_FAKE_OBJ for examining options.
3306 * @see av_opt_find().
3308 const AVClass *avcodec_get_class(void);
3311 * Copy the settings of the source AVCodecContext into the destination
3312 * AVCodecContext. The resulting destination codec context will be
3313 * unopened, i.e. you are required to call avcodec_open2() before you
3314 * can use this AVCodecContext to decode/encode video/audio data.
3316 * @param dest target codec context, should be initialized with
3317 * avcodec_alloc_context3(), but otherwise uninitialized
3318 * @param src source codec context
3319 * @return AVERROR() on error (e.g. memory allocation error), 0 on success
3321 int avcodec_copy_context(AVCodecContext *dest, const AVCodecContext *src);
3324 * Allocate an AVFrame and set its fields to default values. The resulting
3325 * struct must be freed using avcodec_free_frame().
3327 * @return An AVFrame filled with default values or NULL on failure.
3328 * @see avcodec_get_frame_defaults
3330 AVFrame *avcodec_alloc_frame(void);
3333 * Set the fields of the given AVFrame to default values.
3335 * @param frame The AVFrame of which the fields should be set to default values.
3337 void avcodec_get_frame_defaults(AVFrame *frame);
3340 * Free the frame and any dynamically allocated objects in it,
3341 * e.g. extended_data.
3343 * @param frame frame to be freed. The pointer will be set to NULL.
3345 * @warning this function does NOT free the data buffers themselves
3346 * (it does not know how, since they might have been allocated with
3347 * a custom get_buffer()).
3349 void avcodec_free_frame(AVFrame **frame);
3352 * Initialize the AVCodecContext to use the given AVCodec. Prior to using this
3353 * function the context has to be allocated with avcodec_alloc_context3().
3355 * The functions avcodec_find_decoder_by_name(), avcodec_find_encoder_by_name(),
3356 * avcodec_find_decoder() and avcodec_find_encoder() provide an easy way for
3357 * retrieving a codec.
3359 * @warning This function is not thread safe!
3362 * avcodec_register_all();
3363 * av_dict_set(&opts, "b", "2.5M", 0);
3364 * codec = avcodec_find_decoder(AV_CODEC_ID_H264);
3368 * context = avcodec_alloc_context3(codec);
3370 * if (avcodec_open2(context, codec, opts) < 0)
3374 * @param avctx The context to initialize.
3375 * @param codec The codec to open this context for. If a non-NULL codec has been
3376 * previously passed to avcodec_alloc_context3() or
3377 * avcodec_get_context_defaults3() for this context, then this
3378 * parameter MUST be either NULL or equal to the previously passed
3380 * @param options A dictionary filled with AVCodecContext and codec-private options.
3381 * On return this object will be filled with options that were not found.
3383 * @return zero on success, a negative value on error
3384 * @see avcodec_alloc_context3(), avcodec_find_decoder(), avcodec_find_encoder(),
3385 * av_dict_set(), av_opt_find().
3387 int avcodec_open2(AVCodecContext *avctx, const AVCodec *codec, AVDictionary **options);
3390 * Close a given AVCodecContext and free all the data associated with it
3391 * (but not the AVCodecContext itself).
3393 * Calling this function on an AVCodecContext that hasn't been opened will free
3394 * the codec-specific data allocated in avcodec_alloc_context3() /
3395 * avcodec_get_context_defaults3() with a non-NULL codec. Subsequent calls will
3398 int avcodec_close(AVCodecContext *avctx);
3401 * Free all allocated data in the given subtitle struct.
3403 * @param sub AVSubtitle to free.
3405 void avsubtitle_free(AVSubtitle *sub);
3412 * @addtogroup lavc_packet
3417 * Default packet destructor.
3419 void av_destruct_packet(AVPacket *pkt);
3422 * Initialize optional fields of a packet with default values.
3424 * Note, this does not touch the data and size members, which have to be
3425 * initialized separately.
3429 void av_init_packet(AVPacket *pkt);
3432 * Allocate the payload of a packet and initialize its fields with
3436 * @param size wanted payload size
3437 * @return 0 if OK, AVERROR_xxx otherwise
3439 int av_new_packet(AVPacket *pkt, int size);
3442 * Reduce packet size, correctly zeroing padding
3445 * @param size new size
3447 void av_shrink_packet(AVPacket *pkt, int size);
3450 * Increase packet size, correctly zeroing padding
3453 * @param grow_by number of bytes by which to increase the size of the packet
3455 int av_grow_packet(AVPacket *pkt, int grow_by);
3458 * @warning This is a hack - the packet memory allocation stuff is broken. The
3459 * packet is allocated if it was not really allocated.
3461 int av_dup_packet(AVPacket *pkt);
3466 * @param pkt packet to free
3468 void av_free_packet(AVPacket *pkt);
3471 * Allocate new information of a packet.
3474 * @param type side information type
3475 * @param size side information size
3476 * @return pointer to fresh allocated data or NULL otherwise
3478 uint8_t* av_packet_new_side_data(AVPacket *pkt, enum AVPacketSideDataType type,
3482 * Shrink the already allocated side data buffer
3485 * @param type side information type
3486 * @param size new side information size
3487 * @return 0 on success, < 0 on failure
3489 int av_packet_shrink_side_data(AVPacket *pkt, enum AVPacketSideDataType type,
3493 * Get side information from packet.
3496 * @param type desired side information type
3497 * @param size pointer for side information size to store (optional)
3498 * @return pointer to data if present or NULL otherwise
3500 uint8_t* av_packet_get_side_data(AVPacket *pkt, enum AVPacketSideDataType type,
3508 * @addtogroup lavc_decoding
3513 * Find a registered decoder with a matching codec ID.
3515 * @param id AVCodecID of the requested decoder
3516 * @return A decoder if one was found, NULL otherwise.
3518 AVCodec *avcodec_find_decoder(enum AVCodecID id);
3521 * Find a registered decoder with the specified name.
3523 * @param name name of the requested decoder
3524 * @return A decoder if one was found, NULL otherwise.
3526 AVCodec *avcodec_find_decoder_by_name(const char *name);
3528 int avcodec_default_get_buffer(AVCodecContext *s, AVFrame *pic);
3529 void avcodec_default_release_buffer(AVCodecContext *s, AVFrame *pic);
3530 int avcodec_default_reget_buffer(AVCodecContext *s, AVFrame *pic);
3533 * Return the amount of padding in pixels which the get_buffer callback must
3534 * provide around the edge of the image for codecs which do not have the
3535 * CODEC_FLAG_EMU_EDGE flag.
3537 * @return Required padding in pixels.
3539 unsigned avcodec_get_edge_width(void);
3542 * Modify width and height values so that they will result in a memory
3543 * buffer that is acceptable for the codec if you do not use any horizontal
3546 * May only be used if a codec with CODEC_CAP_DR1 has been opened.
3547 * If CODEC_FLAG_EMU_EDGE is not set, the dimensions must have been increased
3548 * according to avcodec_get_edge_width() before.
3550 void avcodec_align_dimensions(AVCodecContext *s, int *width, int *height);
3553 * Modify width and height values so that they will result in a memory
3554 * buffer that is acceptable for the codec if you also ensure that all
3555 * line sizes are a multiple of the respective linesize_align[i].
3557 * May only be used if a codec with CODEC_CAP_DR1 has been opened.
3558 * If CODEC_FLAG_EMU_EDGE is not set, the dimensions must have been increased
3559 * according to avcodec_get_edge_width() before.
3561 void avcodec_align_dimensions2(AVCodecContext *s, int *width, int *height,
3562 int linesize_align[AV_NUM_DATA_POINTERS]);
3564 #if FF_API_OLD_DECODE_AUDIO
3566 * Wrapper function which calls avcodec_decode_audio4.
3568 * @deprecated Use avcodec_decode_audio4 instead.
3570 * Decode the audio frame of size avpkt->size from avpkt->data into samples.
3571 * Some decoders may support multiple frames in a single AVPacket, such
3572 * decoders would then just decode the first frame. In this case,
3573 * avcodec_decode_audio3 has to be called again with an AVPacket that contains
3574 * the remaining data in order to decode the second frame etc.
3576 * could be outputted, frame_size_ptr is zero. Otherwise, it is the
3577 * decompressed frame size in bytes.
3579 * @warning You must set frame_size_ptr to the allocated size of the
3580 * output buffer before calling avcodec_decode_audio3().
3582 * @warning The input buffer must be FF_INPUT_BUFFER_PADDING_SIZE larger than
3583 * the actual read bytes because some optimized bitstream readers read 32 or 64
3584 * bits at once and could read over the end.
3586 * @warning The end of the input buffer avpkt->data should be set to 0 to ensure that
3587 * no overreading happens for damaged MPEG streams.
3589 * @warning You must not provide a custom get_buffer() when using
3590 * avcodec_decode_audio3(). Doing so will override it with
3591 * avcodec_default_get_buffer. Use avcodec_decode_audio4() instead,
3592 * which does allow the application to provide a custom get_buffer().
3594 * @note You might have to align the input buffer avpkt->data and output buffer
3595 * samples. The alignment requirements depend on the CPU: On some CPUs it isn't
3596 * necessary at all, on others it won't work at all if not aligned and on others
3597 * it will work but it will have an impact on performance.
3599 * In practice, avpkt->data should have 4 byte alignment at minimum and
3600 * samples should be 16 byte aligned unless the CPU doesn't need it
3601 * (AltiVec and SSE do).
3603 * @note Codecs which have the CODEC_CAP_DELAY capability set have a delay
3604 * between input and output, these need to be fed with avpkt->data=NULL,
3605 * avpkt->size=0 at the end to return the remaining frames.
3607 * @param avctx the codec context
3608 * @param[out] samples the output buffer, sample type in avctx->sample_fmt
3609 * If the sample format is planar, each channel plane will
3610 * be the same size, with no padding between channels.
3611 * @param[in,out] frame_size_ptr the output buffer size in bytes
3612 * @param[in] avpkt The input AVPacket containing the input buffer.
3613 * You can create such packet with av_init_packet() and by then setting
3614 * data and size, some decoders might in addition need other fields.
3615 * All decoders are designed to use the least fields possible though.
3616 * @return On error a negative value is returned, otherwise the number of bytes
3617 * used or zero if no frame data was decompressed (used) from the input AVPacket.
3619 attribute_deprecated int avcodec_decode_audio3(AVCodecContext *avctx, int16_t *samples,
3620 int *frame_size_ptr,
3625 * Decode the audio frame of size avpkt->size from avpkt->data into frame.
3627 * Some decoders may support multiple frames in a single AVPacket. Such
3628 * decoders would then just decode the first frame. In this case,
3629 * avcodec_decode_audio4 has to be called again with an AVPacket containing
3630 * the remaining data in order to decode the second frame, etc...
3631 * Even if no frames are returned, the packet needs to be fed to the decoder
3632 * with remaining data until it is completely consumed or an error occurs.
3634 * @warning The input buffer, avpkt->data must be FF_INPUT_BUFFER_PADDING_SIZE
3635 * larger than the actual read bytes because some optimized bitstream
3636 * readers read 32 or 64 bits at once and could read over the end.
3638 * @note You might have to align the input buffer. The alignment requirements
3639 * depend on the CPU and the decoder.
3641 * @param avctx the codec context
3642 * @param[out] frame The AVFrame in which to store decoded audio samples.
3643 * Decoders request a buffer of a particular size by setting
3644 * AVFrame.nb_samples prior to calling get_buffer(). The
3645 * decoder may, however, only utilize part of the buffer by
3646 * setting AVFrame.nb_samples to a smaller value in the
3648 * @param[out] got_frame_ptr Zero if no frame could be decoded, otherwise it is
3650 * @param[in] avpkt The input AVPacket containing the input buffer.
3651 * At least avpkt->data and avpkt->size should be set. Some
3652 * decoders might also require additional fields to be set.
3653 * @return A negative error code is returned if an error occurred during
3654 * decoding, otherwise the number of bytes consumed from the input
3655 * AVPacket is returned.
3657 int avcodec_decode_audio4(AVCodecContext *avctx, AVFrame *frame,
3658 int *got_frame_ptr, AVPacket *avpkt);
3661 * Decode the video frame of size avpkt->size from avpkt->data into picture.
3662 * Some decoders may support multiple frames in a single AVPacket, such
3663 * decoders would then just decode the first frame.
3665 * @warning The input buffer must be FF_INPUT_BUFFER_PADDING_SIZE larger than
3666 * the actual read bytes because some optimized bitstream readers read 32 or 64
3667 * bits at once and could read over the end.
3669 * @warning The end of the input buffer buf should be set to 0 to ensure that
3670 * no overreading happens for damaged MPEG streams.
3672 * @note You might have to align the input buffer avpkt->data.
3673 * The alignment requirements depend on the CPU: on some CPUs it isn't
3674 * necessary at all, on others it won't work at all if not aligned and on others
3675 * it will work but it will have an impact on performance.
3677 * In practice, avpkt->data should have 4 byte alignment at minimum.
3679 * @note Codecs which have the CODEC_CAP_DELAY capability set have a delay
3680 * between input and output, these need to be fed with avpkt->data=NULL,
3681 * avpkt->size=0 at the end to return the remaining frames.
3683 * @param avctx the codec context
3684 * @param[out] picture The AVFrame in which the decoded video frame will be stored.
3685 * Use avcodec_alloc_frame to get an AVFrame, the codec will
3686 * allocate memory for the actual bitmap.
3687 * with default get/release_buffer(), the decoder frees/reuses the bitmap as it sees fit.
3688 * with overridden get/release_buffer() (needs CODEC_CAP_DR1) the user decides into what buffer the decoder
3689 * decodes and the decoder tells the user once it does not need the data anymore,
3690 * the user app can at this point free/reuse/keep the memory as it sees fit.
3692 * @param[in] avpkt The input AVpacket containing the input buffer.
3693 * You can create such packet with av_init_packet() and by then setting
3694 * data and size, some decoders might in addition need other fields like
3695 * flags&AV_PKT_FLAG_KEY. All decoders are designed to use the least
3697 * @param[in,out] got_picture_ptr Zero if no frame could be decompressed, otherwise, it is nonzero.
3698 * @return On error a negative value is returned, otherwise the number of bytes
3699 * used or zero if no frame could be decompressed.
3701 int avcodec_decode_video2(AVCodecContext *avctx, AVFrame *picture,
3702 int *got_picture_ptr,
3706 * Decode a subtitle message.
3707 * Return a negative value on error, otherwise return the number of bytes used.
3708 * If no subtitle could be decompressed, got_sub_ptr is zero.
3709 * Otherwise, the subtitle is stored in *sub.
3710 * Note that CODEC_CAP_DR1 is not available for subtitle codecs. This is for
3711 * simplicity, because the performance difference is expect to be negligible
3712 * and reusing a get_buffer written for video codecs would probably perform badly
3713 * due to a potentially very different allocation pattern.
3715 * @param avctx the codec context
3716 * @param[out] sub The AVSubtitle in which the decoded subtitle will be stored, must be
3717 freed with avsubtitle_free if *got_sub_ptr is set.
3718 * @param[in,out] got_sub_ptr Zero if no subtitle could be decompressed, otherwise, it is nonzero.
3719 * @param[in] avpkt The input AVPacket containing the input buffer.
3721 int avcodec_decode_subtitle2(AVCodecContext *avctx, AVSubtitle *sub,
3726 * @defgroup lavc_parsing Frame parsing
3730 typedef struct AVCodecParserContext {
3732 struct AVCodecParser *parser;
3733 int64_t frame_offset; /* offset of the current frame */
3734 int64_t cur_offset; /* current offset
3735 (incremented by each av_parser_parse()) */
3736 int64_t next_frame_offset; /* offset of the next frame */
3738 int pict_type; /* XXX: Put it back in AVCodecContext. */
3740 * This field is used for proper frame duration computation in lavf.
3741 * It signals, how much longer the frame duration of the current frame
3742 * is compared to normal frame duration.
3744 * frame_duration = (1 + repeat_pict) * time_base
3746 * It is used by codecs like H.264 to display telecined material.
3748 int repeat_pict; /* XXX: Put it back in AVCodecContext. */
3749 int64_t pts; /* pts of the current frame */
3750 int64_t dts; /* dts of the current frame */
3755 int fetch_timestamp;
3757 #define AV_PARSER_PTS_NB 4
3758 int cur_frame_start_index;
3759 int64_t cur_frame_offset[AV_PARSER_PTS_NB];
3760 int64_t cur_frame_pts[AV_PARSER_PTS_NB];
3761 int64_t cur_frame_dts[AV_PARSER_PTS_NB];
3764 #define PARSER_FLAG_COMPLETE_FRAMES 0x0001
3765 #define PARSER_FLAG_ONCE 0x0002
3766 /// Set if the parser has a valid file offset
3767 #define PARSER_FLAG_FETCHED_OFFSET 0x0004
3769 int64_t offset; ///< byte offset from starting packet start
3770 int64_t cur_frame_end[AV_PARSER_PTS_NB];
3773 * Set by parser to 1 for key frames and 0 for non-key frames.
3774 * It is initialized to -1, so if the parser doesn't set this flag,
3775 * old-style fallback using AV_PICTURE_TYPE_I picture type as key frames
3781 * Time difference in stream time base units from the pts of this
3782 * packet to the point at which the output from the decoder has converged
3783 * independent from the availability of previous frames. That is, the
3784 * frames are virtually identical no matter if decoding started from
3785 * the very first frame or from this keyframe.
3786 * Is AV_NOPTS_VALUE if unknown.
3787 * This field is not the display duration of the current frame.
3788 * This field has no meaning if the packet does not have AV_PKT_FLAG_KEY
3791 * The purpose of this field is to allow seeking in streams that have no
3792 * keyframes in the conventional sense. It corresponds to the
3793 * recovery point SEI in H.264 and match_time_delta in NUT. It is also
3794 * essential for some types of subtitle streams to ensure that all
3795 * subtitles are correctly displayed after seeking.
3797 int64_t convergence_duration;
3799 // Timestamp generation support:
3801 * Synchronization point for start of timestamp generation.
3803 * Set to >0 for sync point, 0 for no sync point and <0 for undefined
3806 * For example, this corresponds to presence of H.264 buffering period
3812 * Offset of the current timestamp against last timestamp sync point in
3813 * units of AVCodecContext.time_base.
3815 * Set to INT_MIN when dts_sync_point unused. Otherwise, it must
3816 * contain a valid timestamp offset.
3818 * Note that the timestamp of sync point has usually a nonzero
3819 * dts_ref_dts_delta, which refers to the previous sync point. Offset of
3820 * the next frame after timestamp sync point will be usually 1.
3822 * For example, this corresponds to H.264 cpb_removal_delay.
3824 int dts_ref_dts_delta;
3827 * Presentation delay of current frame in units of AVCodecContext.time_base.
3829 * Set to INT_MIN when dts_sync_point unused. Otherwise, it must
3830 * contain valid non-negative timestamp delta (presentation time of a frame
3831 * must not lie in the past).
3833 * This delay represents the difference between decoding and presentation
3834 * time of the frame.
3836 * For example, this corresponds to H.264 dpb_output_delay.
3841 * Position of the packet in file.
3843 * Analogous to cur_frame_pts/dts
3845 int64_t cur_frame_pos[AV_PARSER_PTS_NB];
3848 * Byte position of currently parsed frame in stream.
3853 * Previous frame byte position.
3858 * Duration of the current frame.
3859 * For audio, this is in units of 1 / AVCodecContext.sample_rate.
3860 * For all other types, this is in units of AVCodecContext.time_base.
3863 } AVCodecParserContext;
3865 typedef struct AVCodecParser {
3866 int codec_ids[5]; /* several codec IDs are permitted */
3868 int (*parser_init)(AVCodecParserContext *s);
3869 int (*parser_parse)(AVCodecParserContext *s,
3870 AVCodecContext *avctx,
3871 const uint8_t **poutbuf, int *poutbuf_size,
3872 const uint8_t *buf, int buf_size);
3873 void (*parser_close)(AVCodecParserContext *s);
3874 int (*split)(AVCodecContext *avctx, const uint8_t *buf, int buf_size);
3875 struct AVCodecParser *next;
3878 AVCodecParser *av_parser_next(AVCodecParser *c);
3880 void av_register_codec_parser(AVCodecParser *parser);
3881 AVCodecParserContext *av_parser_init(int codec_id);
3886 * @param s parser context.
3887 * @param avctx codec context.
3888 * @param poutbuf set to pointer to parsed buffer or NULL if not yet finished.
3889 * @param poutbuf_size set to size of parsed buffer or zero if not yet finished.
3890 * @param buf input buffer.
3891 * @param buf_size input length, to signal EOF, this should be 0 (so that the last frame can be output).
3892 * @param pts input presentation timestamp.
3893 * @param dts input decoding timestamp.
3894 * @param pos input byte position in stream.
3895 * @return the number of bytes of the input bitstream used.
3900 * len = av_parser_parse2(myparser, AVCodecContext, &data, &size,
3907 * decode_frame(data, size);
3911 int av_parser_parse2(AVCodecParserContext *s,
3912 AVCodecContext *avctx,
3913 uint8_t **poutbuf, int *poutbuf_size,
3914 const uint8_t *buf, int buf_size,
3915 int64_t pts, int64_t dts,
3919 * @return 0 if the output buffer is a subset of the input, 1 if it is allocated and must be freed
3920 * @deprecated use AVBitstreamFilter
3922 int av_parser_change(AVCodecParserContext *s,
3923 AVCodecContext *avctx,
3924 uint8_t **poutbuf, int *poutbuf_size,
3925 const uint8_t *buf, int buf_size, int keyframe);
3926 void av_parser_close(AVCodecParserContext *s);
3934 * @addtogroup lavc_encoding
3939 * Find a registered encoder with a matching codec ID.
3941 * @param id AVCodecID of the requested encoder
3942 * @return An encoder if one was found, NULL otherwise.
3944 AVCodec *avcodec_find_encoder(enum AVCodecID id);
3947 * Find a registered encoder with the specified name.
3949 * @param name name of the requested encoder
3950 * @return An encoder if one was found, NULL otherwise.
3952 AVCodec *avcodec_find_encoder_by_name(const char *name);
3954 #if FF_API_OLD_ENCODE_AUDIO
3956 * Encode an audio frame from samples into buf.
3958 * @deprecated Use avcodec_encode_audio2 instead.
3960 * @note The output buffer should be at least FF_MIN_BUFFER_SIZE bytes large.
3961 * However, for codecs with avctx->frame_size equal to 0 (e.g. PCM) the user
3962 * will know how much space is needed because it depends on the value passed
3963 * in buf_size as described below. In that case a lower value can be used.
3965 * @param avctx the codec context
3966 * @param[out] buf the output buffer
3967 * @param[in] buf_size the output buffer size
3968 * @param[in] samples the input buffer containing the samples
3969 * The number of samples read from this buffer is frame_size*channels,
3970 * both of which are defined in avctx.
3971 * For codecs which have avctx->frame_size equal to 0 (e.g. PCM) the number of
3972 * samples read from samples is equal to:
3973 * buf_size * 8 / (avctx->channels * av_get_bits_per_sample(avctx->codec_id))
3974 * This also implies that av_get_bits_per_sample() must not return 0 for these
3976 * @return On error a negative value is returned, on success zero or the number
3977 * of bytes used to encode the data read from the input buffer.
3979 int attribute_deprecated avcodec_encode_audio(AVCodecContext *avctx,
3980 uint8_t *buf, int buf_size,
3981 const short *samples);
3985 * Encode a frame of audio.
3987 * Takes input samples from frame and writes the next output packet, if
3988 * available, to avpkt. The output packet does not necessarily contain data for
3989 * the most recent frame, as encoders can delay, split, and combine input frames
3990 * internally as needed.
3992 * @param avctx codec context
3993 * @param avpkt output AVPacket.
3994 * The user can supply an output buffer by setting
3995 * avpkt->data and avpkt->size prior to calling the
3996 * function, but if the size of the user-provided data is not
3997 * large enough, encoding will fail. All other AVPacket fields
3998 * will be reset by the encoder using av_init_packet(). If
3999 * avpkt->data is NULL, the encoder will allocate it.
4000 * The encoder will set avpkt->size to the size of the
4003 * If this function fails or produces no output, avpkt will be
4004 * freed using av_free_packet() (i.e. avpkt->destruct will be
4005 * called to free the user supplied buffer).
4006 * @param[in] frame AVFrame containing the raw audio data to be encoded.
4007 * May be NULL when flushing an encoder that has the
4008 * CODEC_CAP_DELAY capability set.
4009 * If CODEC_CAP_VARIABLE_FRAME_SIZE is set, then each frame
4010 * can have any number of samples.
4011 * If it is not set, frame->nb_samples must be equal to
4012 * avctx->frame_size for all frames except the last.
4013 * The final frame may be smaller than avctx->frame_size.
4014 * @param[out] got_packet_ptr This field is set to 1 by libavcodec if the
4015 * output packet is non-empty, and to 0 if it is
4016 * empty. If the function returns an error, the
4017 * packet can be assumed to be invalid, and the
4018 * value of got_packet_ptr is undefined and should
4020 * @return 0 on success, negative error code on failure
4022 int avcodec_encode_audio2(AVCodecContext *avctx, AVPacket *avpkt,
4023 const AVFrame *frame, int *got_packet_ptr);
4025 #if FF_API_OLD_ENCODE_VIDEO
4027 * @deprecated use avcodec_encode_video2() instead.
4029 * Encode a video frame from pict into buf.
4030 * The input picture should be
4031 * stored using a specific format, namely avctx.pix_fmt.
4033 * @param avctx the codec context
4034 * @param[out] buf the output buffer for the bitstream of encoded frame
4035 * @param[in] buf_size the size of the output buffer in bytes
4036 * @param[in] pict the input picture to encode
4037 * @return On error a negative value is returned, on success zero or the number
4038 * of bytes used from the output buffer.
4040 attribute_deprecated
4041 int avcodec_encode_video(AVCodecContext *avctx, uint8_t *buf, int buf_size,
4042 const AVFrame *pict);
4046 * Encode a frame of video.
4048 * Takes input raw video data from frame and writes the next output packet, if
4049 * available, to avpkt. The output packet does not necessarily contain data for
4050 * the most recent frame, as encoders can delay and reorder input frames
4051 * internally as needed.
4053 * @param avctx codec context
4054 * @param avpkt output AVPacket.
4055 * The user can supply an output buffer by setting
4056 * avpkt->data and avpkt->size prior to calling the
4057 * function, but if the size of the user-provided data is not
4058 * large enough, encoding will fail. All other AVPacket fields
4059 * will be reset by the encoder using av_init_packet(). If
4060 * avpkt->data is NULL, the encoder will allocate it.
4061 * The encoder will set avpkt->size to the size of the
4062 * output packet. The returned data (if any) belongs to the
4063 * caller, he is responsible for freeing it.
4065 * If this function fails or produces no output, avpkt will be
4066 * freed using av_free_packet() (i.e. avpkt->destruct will be
4067 * called to free the user supplied buffer).
4068 * @param[in] frame AVFrame containing the raw video data to be encoded.
4069 * May be NULL when flushing an encoder that has the
4070 * CODEC_CAP_DELAY capability set.
4071 * @param[out] got_packet_ptr This field is set to 1 by libavcodec if the
4072 * output packet is non-empty, and to 0 if it is
4073 * empty. If the function returns an error, the
4074 * packet can be assumed to be invalid, and the
4075 * value of got_packet_ptr is undefined and should
4077 * @return 0 on success, negative error code on failure
4079 int avcodec_encode_video2(AVCodecContext *avctx, AVPacket *avpkt,
4080 const AVFrame *frame, int *got_packet_ptr);
4082 int avcodec_encode_subtitle(AVCodecContext *avctx, uint8_t *buf, int buf_size,
4083 const AVSubtitle *sub);
4090 #if FF_API_AVCODEC_RESAMPLE
4092 * @defgroup lavc_resample Audio resampling
4094 * @deprecated use libavresample instead
4098 struct ReSampleContext;
4099 struct AVResampleContext;
4101 typedef struct ReSampleContext ReSampleContext;
4104 * Initialize audio resampling context.
4106 * @param output_channels number of output channels
4107 * @param input_channels number of input channels
4108 * @param output_rate output sample rate
4109 * @param input_rate input sample rate
4110 * @param sample_fmt_out requested output sample format
4111 * @param sample_fmt_in input sample format
4112 * @param filter_length length of each FIR filter in the filterbank relative to the cutoff frequency
4113 * @param log2_phase_count log2 of the number of entries in the polyphase filterbank
4114 * @param linear if 1 then the used FIR filter will be linearly interpolated
4115 between the 2 closest, if 0 the closest will be used
4116 * @param cutoff cutoff frequency, 1.0 corresponds to half the output sampling rate
4117 * @return allocated ReSampleContext, NULL if error occurred
4119 attribute_deprecated
4120 ReSampleContext *av_audio_resample_init(int output_channels, int input_channels,
4121 int output_rate, int input_rate,
4122 enum AVSampleFormat sample_fmt_out,
4123 enum AVSampleFormat sample_fmt_in,
4124 int filter_length, int log2_phase_count,
4125 int linear, double cutoff);
4127 attribute_deprecated
4128 int audio_resample(ReSampleContext *s, short *output, short *input, int nb_samples);
4131 * Free resample context.
4133 * @param s a non-NULL pointer to a resample context previously
4134 * created with av_audio_resample_init()
4136 attribute_deprecated
4137 void audio_resample_close(ReSampleContext *s);
4141 * Initialize an audio resampler.
4142 * Note, if either rate is not an integer then simply scale both rates up so they are.
4143 * @param filter_length length of each FIR filter in the filterbank relative to the cutoff freq
4144 * @param log2_phase_count log2 of the number of entries in the polyphase filterbank
4145 * @param linear If 1 then the used FIR filter will be linearly interpolated
4146 between the 2 closest, if 0 the closest will be used
4147 * @param cutoff cutoff frequency, 1.0 corresponds to half the output sampling rate
4149 attribute_deprecated
4150 struct AVResampleContext *av_resample_init(int out_rate, int in_rate, int filter_length, int log2_phase_count, int linear, double cutoff);
4153 * Resample an array of samples using a previously configured context.
4154 * @param src an array of unconsumed samples
4155 * @param consumed the number of samples of src which have been consumed are returned here
4156 * @param src_size the number of unconsumed samples available
4157 * @param dst_size the amount of space in samples available in dst
4158 * @param update_ctx If this is 0 then the context will not be modified, that way several channels can be resampled with the same context.
4159 * @return the number of samples written in dst or -1 if an error occurred
4161 attribute_deprecated
4162 int av_resample(struct AVResampleContext *c, short *dst, short *src, int *consumed, int src_size, int dst_size, int update_ctx);
4166 * Compensate samplerate/timestamp drift. The compensation is done by changing
4167 * the resampler parameters, so no audible clicks or similar distortions occur
4168 * @param compensation_distance distance in output samples over which the compensation should be performed
4169 * @param sample_delta number of output samples which should be output less
4171 * example: av_resample_compensate(c, 10, 500)
4172 * here instead of 510 samples only 500 samples would be output
4174 * note, due to rounding the actual compensation might be slightly different,
4175 * especially if the compensation_distance is large and the in_rate used during init is small
4177 attribute_deprecated
4178 void av_resample_compensate(struct AVResampleContext *c, int sample_delta, int compensation_distance);
4179 attribute_deprecated
4180 void av_resample_close(struct AVResampleContext *c);
4188 * @addtogroup lavc_picture
4193 * Allocate memory for a picture. Call avpicture_free() to free it.
4195 * @see avpicture_fill()
4197 * @param picture the picture to be filled in
4198 * @param pix_fmt the format of the picture
4199 * @param width the width of the picture
4200 * @param height the height of the picture
4201 * @return zero if successful, a negative value if not
4203 int avpicture_alloc(AVPicture *picture, enum AVPixelFormat pix_fmt, int width, int height);
4206 * Free a picture previously allocated by avpicture_alloc().
4207 * The data buffer used by the AVPicture is freed, but the AVPicture structure
4210 * @param picture the AVPicture to be freed
4212 void avpicture_free(AVPicture *picture);
4215 * Fill in the AVPicture fields.
4216 * The fields of the given AVPicture are filled in by using the 'ptr' address
4217 * which points to the image data buffer. Depending on the specified picture
4218 * format, one or multiple image data pointers and line sizes will be set.
4219 * If a planar format is specified, several pointers will be set pointing to
4220 * the different picture planes and the line sizes of the different planes
4221 * will be stored in the lines_sizes array.
4222 * Call with ptr == NULL to get the required size for the ptr buffer.
4224 * To allocate the buffer and fill in the AVPicture fields in one call,
4225 * use avpicture_alloc().
4227 * @param picture AVPicture whose fields are to be filled in
4228 * @param ptr Buffer which will contain or contains the actual image data
4229 * @param pix_fmt The format in which the picture data is stored.
4230 * @param width the width of the image in pixels
4231 * @param height the height of the image in pixels
4232 * @return size of the image data in bytes
4234 int avpicture_fill(AVPicture *picture, uint8_t *ptr,
4235 enum AVPixelFormat pix_fmt, int width, int height);
4238 * Copy pixel data from an AVPicture into a buffer.
4239 * The data is stored compactly, without any gaps for alignment or padding
4240 * which may be applied by avpicture_fill().
4242 * @see avpicture_get_size()
4244 * @param[in] src AVPicture containing image data
4245 * @param[in] pix_fmt The format in which the picture data is stored.
4246 * @param[in] width the width of the image in pixels.
4247 * @param[in] height the height of the image in pixels.
4248 * @param[out] dest A buffer into which picture data will be copied.
4249 * @param[in] dest_size The size of 'dest'.
4250 * @return The number of bytes written to dest, or a negative value (error code) on error.
4252 int avpicture_layout(const AVPicture* src, enum AVPixelFormat pix_fmt,
4253 int width, int height,
4254 unsigned char *dest, int dest_size);
4257 * Calculate the size in bytes that a picture of the given width and height
4258 * would occupy if stored in the given picture format.
4259 * Note that this returns the size of a compact representation as generated
4260 * by avpicture_layout(), which can be smaller than the size required for e.g.
4263 * @param pix_fmt the given picture format
4264 * @param width the width of the image
4265 * @param height the height of the image
4266 * @return Image data size in bytes or -1 on error (e.g. too large dimensions).
4268 int avpicture_get_size(enum AVPixelFormat pix_fmt, int width, int height);
4271 * deinterlace - if not supported return -1
4273 int avpicture_deinterlace(AVPicture *dst, const AVPicture *src,
4274 enum AVPixelFormat pix_fmt, int width, int height);
4276 * Copy image src to dst. Wraps av_picture_data_copy() above.
4278 void av_picture_copy(AVPicture *dst, const AVPicture *src,
4279 enum AVPixelFormat pix_fmt, int width, int height);
4282 * Crop image top and left side.
4284 int av_picture_crop(AVPicture *dst, const AVPicture *src,
4285 enum AVPixelFormat pix_fmt, int top_band, int left_band);
4290 int av_picture_pad(AVPicture *dst, const AVPicture *src, int height, int width, enum AVPixelFormat pix_fmt,
4291 int padtop, int padbottom, int padleft, int padright, int *color);
4298 * @defgroup lavc_misc Utility functions
4301 * Miscellaneous utility functions related to both encoding and decoding
4307 * @defgroup lavc_misc_pixfmt Pixel formats
4309 * Functions for working with pixel formats.
4314 * @deprecated Use av_pix_fmt_get_chroma_sub_sample
4317 void attribute_deprecated avcodec_get_chroma_sub_sample(enum AVPixelFormat pix_fmt, int *h_shift, int *v_shift);
4320 * Return a value representing the fourCC code associated to the
4321 * pixel format pix_fmt, or 0 if no associated fourCC code can be
4324 unsigned int avcodec_pix_fmt_to_codec_tag(enum AVPixelFormat pix_fmt);
4326 #define FF_LOSS_RESOLUTION 0x0001 /**< loss due to resolution change */
4327 #define FF_LOSS_DEPTH 0x0002 /**< loss due to color depth change */
4328 #define FF_LOSS_COLORSPACE 0x0004 /**< loss due to color space conversion */
4329 #define FF_LOSS_ALPHA 0x0008 /**< loss of alpha bits */
4330 #define FF_LOSS_COLORQUANT 0x0010 /**< loss due to color quantization */
4331 #define FF_LOSS_CHROMA 0x0020 /**< loss of chroma (e.g. RGB to gray conversion) */
4334 * Compute what kind of losses will occur when converting from one specific
4335 * pixel format to another.
4336 * When converting from one pixel format to another, information loss may occur.
4337 * For example, when converting from RGB24 to GRAY, the color information will
4338 * be lost. Similarly, other losses occur when converting from some formats to
4339 * other formats. These losses can involve loss of chroma, but also loss of
4340 * resolution, loss of color depth, loss due to the color space conversion, loss
4341 * of the alpha bits or loss due to color quantization.
4342 * avcodec_get_fix_fmt_loss() informs you about the various types of losses
4343 * which will occur when converting from one pixel format to another.
4345 * @param[in] dst_pix_fmt destination pixel format
4346 * @param[in] src_pix_fmt source pixel format
4347 * @param[in] has_alpha Whether the source pixel format alpha channel is used.
4348 * @return Combination of flags informing you what kind of losses will occur.
4350 int avcodec_get_pix_fmt_loss(enum AVPixelFormat dst_pix_fmt, enum AVPixelFormat src_pix_fmt,
4353 #if FF_API_FIND_BEST_PIX_FMT
4355 * @deprecated use avcodec_find_best_pix_fmt2() instead.
4357 * Find the best pixel format to convert to given a certain source pixel
4358 * format. When converting from one pixel format to another, information loss
4359 * may occur. For example, when converting from RGB24 to GRAY, the color
4360 * information will be lost. Similarly, other losses occur when converting from
4361 * some formats to other formats. avcodec_find_best_pix_fmt() searches which of
4362 * the given pixel formats should be used to suffer the least amount of loss.
4363 * The pixel formats from which it chooses one, are determined by the
4364 * pix_fmt_mask parameter.
4367 * src_pix_fmt = AV_PIX_FMT_YUV420P;
4368 * pix_fmt_mask = (1 << AV_PIX_FMT_YUV422P) || (1 << AV_PIX_FMT_RGB24);
4369 * dst_pix_fmt = avcodec_find_best_pix_fmt(pix_fmt_mask, src_pix_fmt, alpha, &loss);
4372 * @param[in] pix_fmt_mask bitmask determining which pixel format to choose from
4373 * @param[in] src_pix_fmt source pixel format
4374 * @param[in] has_alpha Whether the source pixel format alpha channel is used.
4375 * @param[out] loss_ptr Combination of flags informing you what kind of losses will occur.
4376 * @return The best pixel format to convert to or -1 if none was found.
4378 attribute_deprecated
4379 enum AVPixelFormat avcodec_find_best_pix_fmt(int64_t pix_fmt_mask, enum AVPixelFormat src_pix_fmt,
4380 int has_alpha, int *loss_ptr);
4381 #endif /* FF_API_FIND_BEST_PIX_FMT */
4384 * Find the best pixel format to convert to given a certain source pixel
4385 * format. When converting from one pixel format to another, information loss
4386 * may occur. For example, when converting from RGB24 to GRAY, the color
4387 * information will be lost. Similarly, other losses occur when converting from
4388 * some formats to other formats. avcodec_find_best_pix_fmt2() searches which of
4389 * the given pixel formats should be used to suffer the least amount of loss.
4390 * The pixel formats from which it chooses one, are determined by the
4391 * pix_fmt_list parameter.
4394 * @param[in] pix_fmt_list AV_PIX_FMT_NONE terminated array of pixel formats to choose from
4395 * @param[in] src_pix_fmt source pixel format
4396 * @param[in] has_alpha Whether the source pixel format alpha channel is used.
4397 * @param[out] loss_ptr Combination of flags informing you what kind of losses will occur.
4398 * @return The best pixel format to convert to or -1 if none was found.
4400 enum AVPixelFormat avcodec_find_best_pix_fmt2(enum AVPixelFormat *pix_fmt_list,
4401 enum AVPixelFormat src_pix_fmt,
4402 int has_alpha, int *loss_ptr);
4404 enum AVPixelFormat avcodec_default_get_format(struct AVCodecContext *s, const enum AVPixelFormat * fmt);
4410 void avcodec_set_dimensions(AVCodecContext *s, int width, int height);
4413 * Put a string representing the codec tag codec_tag in buf.
4415 * @param buf_size size in bytes of buf
4416 * @return the length of the string that would have been generated if
4417 * enough space had been available, excluding the trailing null
4419 size_t av_get_codec_tag_string(char *buf, size_t buf_size, unsigned int codec_tag);
4421 void avcodec_string(char *buf, int buf_size, AVCodecContext *enc, int encode);
4424 * Return a name for the specified profile, if available.
4426 * @param codec the codec that is searched for the given profile
4427 * @param profile the profile value for which a name is requested
4428 * @return A name for the profile if found, NULL otherwise.
4430 const char *av_get_profile_name(const AVCodec *codec, int profile);
4432 int avcodec_default_execute(AVCodecContext *c, int (*func)(AVCodecContext *c2, void *arg2),void *arg, int *ret, int count, int size);
4433 int avcodec_default_execute2(AVCodecContext *c, int (*func)(AVCodecContext *c2, void *arg2, int, int),void *arg, int *ret, int count);
4434 //FIXME func typedef
4437 * Fill audio frame data and linesize.
4438 * AVFrame extended_data channel pointers are allocated if necessary for
4441 * @param frame the AVFrame
4442 * frame->nb_samples must be set prior to calling the
4443 * function. This function fills in frame->data,
4444 * frame->extended_data, frame->linesize[0].
4445 * @param nb_channels channel count
4446 * @param sample_fmt sample format
4447 * @param buf buffer to use for frame data
4448 * @param buf_size size of buffer
4449 * @param align plane size sample alignment (0 = default)
4450 * @return 0 on success, negative error code on failure
4452 int avcodec_fill_audio_frame(AVFrame *frame, int nb_channels,
4453 enum AVSampleFormat sample_fmt, const uint8_t *buf,
4454 int buf_size, int align);
4457 * Flush buffers, should be called when seeking or when switching to a different stream.
4459 void avcodec_flush_buffers(AVCodecContext *avctx);
4461 void avcodec_default_free_buffers(AVCodecContext *s);
4464 * Return codec bits per sample.
4466 * @param[in] codec_id the codec
4467 * @return Number of bits per sample or zero if unknown for the given codec.
4469 int av_get_bits_per_sample(enum AVCodecID codec_id);
4472 * Return codec bits per sample.
4473 * Only return non-zero if the bits per sample is exactly correct, not an
4476 * @param[in] codec_id the codec
4477 * @return Number of bits per sample or zero if unknown for the given codec.
4479 int av_get_exact_bits_per_sample(enum AVCodecID codec_id);
4482 * Return audio frame duration.
4484 * @param avctx codec context
4485 * @param frame_bytes size of the frame, or 0 if unknown
4486 * @return frame duration, in samples, if known. 0 if not able to
4489 int av_get_audio_frame_duration(AVCodecContext *avctx, int frame_bytes);
4492 typedef struct AVBitStreamFilterContext {
4494 struct AVBitStreamFilter *filter;
4495 AVCodecParserContext *parser;
4496 struct AVBitStreamFilterContext *next;
4497 } AVBitStreamFilterContext;
4500 typedef struct AVBitStreamFilter {
4503 int (*filter)(AVBitStreamFilterContext *bsfc,
4504 AVCodecContext *avctx, const char *args,
4505 uint8_t **poutbuf, int *poutbuf_size,
4506 const uint8_t *buf, int buf_size, int keyframe);
4507 void (*close)(AVBitStreamFilterContext *bsfc);
4508 struct AVBitStreamFilter *next;
4509 } AVBitStreamFilter;
4511 void av_register_bitstream_filter(AVBitStreamFilter *bsf);
4512 AVBitStreamFilterContext *av_bitstream_filter_init(const char *name);
4513 int av_bitstream_filter_filter(AVBitStreamFilterContext *bsfc,
4514 AVCodecContext *avctx, const char *args,
4515 uint8_t **poutbuf, int *poutbuf_size,
4516 const uint8_t *buf, int buf_size, int keyframe);
4517 void av_bitstream_filter_close(AVBitStreamFilterContext *bsf);
4519 AVBitStreamFilter *av_bitstream_filter_next(AVBitStreamFilter *f);
4524 * Reallocate the given block if it is not large enough, otherwise do nothing.
4528 void *av_fast_realloc(void *ptr, unsigned int *size, size_t min_size);
4531 * Allocate a buffer, reusing the given one if large enough.
4533 * Contrary to av_fast_realloc the current buffer contents might not be
4534 * preserved and on error the old buffer is freed, thus no special
4535 * handling to avoid memleaks is necessary.
4537 * @param ptr pointer to pointer to already allocated buffer, overwritten with pointer to new buffer
4538 * @param size size of the buffer *ptr points to
4539 * @param min_size minimum size of *ptr buffer after returning, *ptr will be NULL and
4540 * *size 0 if an error occurred.
4542 void av_fast_malloc(void *ptr, unsigned int *size, size_t min_size);
4545 * Allocate a buffer with padding, reusing the given one if large enough.
4547 * Same behaviour av_fast_malloc but the buffer has additional
4548 * FF_INPUT_PADDING_SIZE at the end which will always memset to 0.
4551 void av_fast_padded_malloc(void *ptr, unsigned int *size, size_t min_size);
4554 * Encode extradata length to a buffer. Used by xiph codecs.
4556 * @param s buffer to write to; must be at least (v/255+1) bytes long
4557 * @param v size of extradata in bytes
4558 * @return number of bytes written to the buffer.
4560 unsigned int av_xiphlacing(unsigned char *s, unsigned int v);
4563 * Log a generic warning message about a missing feature. This function is
4564 * intended to be used internally by Libav (libavcodec, libavformat, etc.)
4565 * only, and would normally not be used by applications.
4566 * @param[in] avc a pointer to an arbitrary struct of which the first field is
4567 * a pointer to an AVClass struct
4568 * @param[in] feature string containing the name of the missing feature
4569 * @param[in] want_sample indicates if samples are wanted which exhibit this feature.
4570 * If want_sample is non-zero, additional verbage will be added to the log
4571 * message which tells the user how to report samples to the development
4574 void av_log_missing_feature(void *avc, const char *feature, int want_sample);
4577 * Log a generic warning message asking for a sample. This function is
4578 * intended to be used internally by Libav (libavcodec, libavformat, etc.)
4579 * only, and would normally not be used by applications.
4580 * @param[in] avc a pointer to an arbitrary struct of which the first field is
4581 * a pointer to an AVClass struct
4582 * @param[in] msg string containing an optional message, or NULL if no message
4584 void av_log_ask_for_sample(void *avc, const char *msg, ...) av_printf_format(2, 3);
4587 * Register the hardware accelerator hwaccel.
4589 void av_register_hwaccel(AVHWAccel *hwaccel);
4592 * If hwaccel is NULL, returns the first registered hardware accelerator,
4593 * if hwaccel is non-NULL, returns the next registered hardware accelerator
4594 * after hwaccel, or NULL if hwaccel is the last one.
4596 AVHWAccel *av_hwaccel_next(AVHWAccel *hwaccel);
4600 * Lock operation used by lockmgr
4603 AV_LOCK_CREATE, ///< Create a mutex
4604 AV_LOCK_OBTAIN, ///< Lock the mutex
4605 AV_LOCK_RELEASE, ///< Unlock the mutex
4606 AV_LOCK_DESTROY, ///< Free mutex resources
4610 * Register a user provided lock manager supporting the operations
4611 * specified by AVLockOp. mutex points to a (void *) where the
4612 * lockmgr should store/get a pointer to a user allocated mutex. It's
4613 * NULL upon AV_LOCK_CREATE and != NULL for all other ops.
4615 * @param cb User defined callback. Note: Libav may invoke calls to this
4616 * callback during the call to av_lockmgr_register().
4617 * Thus, the application must be prepared to handle that.
4618 * If cb is set to NULL the lockmgr will be unregistered.
4619 * Also note that during unregistration the previously registered
4620 * lockmgr callback may also be invoked.
4622 int av_lockmgr_register(int (*cb)(void **mutex, enum AVLockOp op));
4625 * Get the type of the given codec.
4627 enum AVMediaType avcodec_get_type(enum AVCodecID codec_id);
4630 * @return a positive value if s is open (i.e. avcodec_open2() was called on it
4631 * with no corresponding avcodec_close()), 0 otherwise.
4633 int avcodec_is_open(AVCodecContext *s);
4636 * @return a non-zero number if codec is an encoder, zero otherwise
4638 int av_codec_is_encoder(const AVCodec *codec);
4641 * @return a non-zero number if codec is a decoder, zero otherwise
4643 int av_codec_is_decoder(const AVCodec *codec);
4646 * @return descriptor for given codec ID or NULL if no descriptor exists.
4648 const AVCodecDescriptor *avcodec_descriptor_get(enum AVCodecID id);
4651 * Iterate over all codec descriptors known to libavcodec.
4653 * @param prev previous descriptor. NULL to get the first descriptor.
4655 * @return next descriptor or NULL after the last descriptor
4657 const AVCodecDescriptor *avcodec_descriptor_next(const AVCodecDescriptor *prev);
4660 * @return codec descriptor with the given name or NULL if no such descriptor
4663 const AVCodecDescriptor *avcodec_descriptor_get_by_name(const char *name);
4669 #endif /* AVCODEC_AVCODEC_H */