2 * copyright (c) 2001 Fabrice Bellard
4 * This file is part of FFmpeg.
6 * FFmpeg is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU Lesser General Public
8 * License as published by the Free Software Foundation; either
9 * version 2.1 of the License, or (at your option) any later version.
11 * FFmpeg is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * Lesser General Public License for more details.
16 * You should have received a copy of the GNU Lesser General Public
17 * License along with FFmpeg; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
21 #ifndef AVCODEC_AVCODEC_H
22 #define AVCODEC_AVCODEC_H
27 * Libavcodec external API header
31 #include "libavutil/samplefmt.h"
32 #include "libavutil/attributes.h"
33 #include "libavutil/avutil.h"
34 #include "libavutil/buffer.h"
35 #include "libavutil/cpu.h"
36 #include "libavutil/channel_layout.h"
37 #include "libavutil/dict.h"
38 #include "libavutil/frame.h"
39 #include "libavutil/hwcontext.h"
40 #include "libavutil/log.h"
41 #include "libavutil/pixfmt.h"
42 #include "libavutil/rational.h"
46 #include "codec_desc.h"
47 #include "codec_par.h"
53 * @defgroup libavc libavcodec
54 * Encoding/Decoding Library
58 * @defgroup lavc_decoding Decoding
62 * @defgroup lavc_encoding Encoding
66 * @defgroup lavc_codec Codecs
68 * @defgroup lavc_codec_native Native Codecs
71 * @defgroup lavc_codec_wrappers External library wrappers
74 * @defgroup lavc_codec_hwaccel Hardware Accelerators bridge
78 * @defgroup lavc_internal Internal
86 * @defgroup lavc_encdec send/receive encoding and decoding API overview
89 * The avcodec_send_packet()/avcodec_receive_frame()/avcodec_send_frame()/
90 * avcodec_receive_packet() functions provide an encode/decode API, which
91 * decouples input and output.
93 * The API is very similar for encoding/decoding and audio/video, and works as
95 * - Set up and open the AVCodecContext as usual.
97 * - For decoding, call avcodec_send_packet() to give the decoder raw
98 * compressed data in an AVPacket.
99 * - For encoding, call avcodec_send_frame() to give the encoder an AVFrame
100 * containing uncompressed audio or video.
102 * In both cases, it is recommended that AVPackets and AVFrames are
103 * refcounted, or libavcodec might have to copy the input data. (libavformat
104 * always returns refcounted AVPackets, and av_frame_get_buffer() allocates
105 * refcounted AVFrames.)
106 * - Receive output in a loop. Periodically call one of the avcodec_receive_*()
107 * functions and process their output:
108 * - For decoding, call avcodec_receive_frame(). On success, it will return
109 * an AVFrame containing uncompressed audio or video data.
110 * - For encoding, call avcodec_receive_packet(). On success, it will return
111 * an AVPacket with a compressed frame.
113 * Repeat this call until it returns AVERROR(EAGAIN) or an error. The
114 * AVERROR(EAGAIN) return value means that new input data is required to
115 * return new output. In this case, continue with sending input. For each
116 * input frame/packet, the codec will typically return 1 output frame/packet,
117 * but it can also be 0 or more than 1.
119 * At the beginning of decoding or encoding, the codec might accept multiple
120 * input frames/packets without returning a frame, until its internal buffers
121 * are filled. This situation is handled transparently if you follow the steps
124 * In theory, sending input can result in EAGAIN - this should happen only if
125 * not all output was received. You can use this to structure alternative decode
126 * or encode loops other than the one suggested above. For example, you could
127 * try sending new input on each iteration, and try to receive output if that
130 * End of stream situations. These require "flushing" (aka draining) the codec,
131 * as the codec might buffer multiple frames or packets internally for
132 * performance or out of necessity (consider B-frames).
133 * This is handled as follows:
134 * - Instead of valid input, send NULL to the avcodec_send_packet() (decoding)
135 * or avcodec_send_frame() (encoding) functions. This will enter draining
137 * - Call avcodec_receive_frame() (decoding) or avcodec_receive_packet()
138 * (encoding) in a loop until AVERROR_EOF is returned. The functions will
139 * not return AVERROR(EAGAIN), unless you forgot to enter draining mode.
140 * - Before decoding can be resumed again, the codec has to be reset with
141 * avcodec_flush_buffers().
143 * Using the API as outlined above is highly recommended. But it is also
144 * possible to call functions outside of this rigid schema. For example, you can
145 * call avcodec_send_packet() repeatedly without calling
146 * avcodec_receive_frame(). In this case, avcodec_send_packet() will succeed
147 * until the codec's internal buffer has been filled up (which is typically of
148 * size 1 per output frame, after initial input), and then reject input with
149 * AVERROR(EAGAIN). Once it starts rejecting input, you have no choice but to
150 * read at least some output.
152 * Not all codecs will follow a rigid and predictable dataflow; the only
153 * guarantee is that an AVERROR(EAGAIN) return value on a send/receive call on
154 * one end implies that a receive/send call on the other end will succeed, or
155 * at least will not fail with AVERROR(EAGAIN). In general, no codec will
156 * permit unlimited buffering of input or output.
158 * This API replaces the following legacy functions:
159 * - avcodec_decode_video2() and avcodec_decode_audio4():
160 * Use avcodec_send_packet() to feed input to the decoder, then use
161 * avcodec_receive_frame() to receive decoded frames after each packet.
162 * Unlike with the old video decoding API, multiple frames might result from
163 * a packet. For audio, splitting the input packet into frames by partially
164 * decoding packets becomes transparent to the API user. You never need to
165 * feed an AVPacket to the API twice (unless it is rejected with AVERROR(EAGAIN) - then
166 * no data was read from the packet).
167 * Additionally, sending a flush/draining packet is required only once.
168 * - avcodec_encode_video2()/avcodec_encode_audio2():
169 * Use avcodec_send_frame() to feed input to the encoder, then use
170 * avcodec_receive_packet() to receive encoded packets.
171 * Providing user-allocated buffers for avcodec_receive_packet() is not
173 * - The new API does not handle subtitles yet.
175 * Mixing new and old function calls on the same AVCodecContext is not allowed,
176 * and will result in undefined behavior.
178 * Some codecs might require using the new API; using the old API will return
179 * an error when calling it. All codecs support the new API.
181 * A codec is not allowed to return AVERROR(EAGAIN) for both sending and receiving. This
182 * would be an invalid state, which could put the codec user into an endless
183 * loop. The API has no concept of time either: it cannot happen that trying to
184 * do avcodec_send_packet() results in AVERROR(EAGAIN), but a repeated call 1 second
185 * later accepts the packet (with no other receive/flush API calls involved).
186 * The API is a strict state machine, and the passage of time is not supposed
187 * to influence it. Some timing-dependent behavior might still be deemed
188 * acceptable in certain cases. But it must never result in both send/receive
189 * returning EAGAIN at the same time at any point. It must also absolutely be
190 * avoided that the current state is "unstable" and can "flip-flop" between
191 * the send/receive APIs allowing progress. For example, it's not allowed that
192 * the codec randomly decides that it actually wants to consume a packet now
193 * instead of returning a frame, after it just returned AVERROR(EAGAIN) on an
194 * avcodec_send_packet() call.
199 * @defgroup lavc_core Core functions/structures.
202 * Basic definitions, functions for querying libavcodec capabilities,
203 * allocating core structures, etc.
208 * @ingroup lavc_decoding
209 * Required number of additionally allocated bytes at the end of the input bitstream for decoding.
210 * This is mainly needed because some optimized bitstream readers read
211 * 32 or 64 bit at once and could read over the end.<br>
212 * Note: If the first 23 bits of the additional bytes are not 0, then damaged
213 * MPEG bitstreams could cause overread and segfault.
215 #define AV_INPUT_BUFFER_PADDING_SIZE 64
218 * @ingroup lavc_encoding
219 * minimum encoding buffer size
220 * Used to avoid some checks during header writing.
222 #define AV_INPUT_BUFFER_MIN_SIZE 16384
225 * @ingroup lavc_decoding
228 /* We leave some space between them for extensions (drop some
229 * keyframes for intra-only or drop just some bidir frames). */
230 AVDISCARD_NONE =-16, ///< discard nothing
231 AVDISCARD_DEFAULT = 0, ///< discard useless packets like 0 size packets in avi
232 AVDISCARD_NONREF = 8, ///< discard all non reference
233 AVDISCARD_BIDIR = 16, ///< discard all bidirectional frames
234 AVDISCARD_NONINTRA= 24, ///< discard all non intra frames
235 AVDISCARD_NONKEY = 32, ///< discard all frames except keyframes
236 AVDISCARD_ALL = 48, ///< discard all
239 enum AVAudioServiceType {
240 AV_AUDIO_SERVICE_TYPE_MAIN = 0,
241 AV_AUDIO_SERVICE_TYPE_EFFECTS = 1,
242 AV_AUDIO_SERVICE_TYPE_VISUALLY_IMPAIRED = 2,
243 AV_AUDIO_SERVICE_TYPE_HEARING_IMPAIRED = 3,
244 AV_AUDIO_SERVICE_TYPE_DIALOGUE = 4,
245 AV_AUDIO_SERVICE_TYPE_COMMENTARY = 5,
246 AV_AUDIO_SERVICE_TYPE_EMERGENCY = 6,
247 AV_AUDIO_SERVICE_TYPE_VOICE_OVER = 7,
248 AV_AUDIO_SERVICE_TYPE_KARAOKE = 8,
249 AV_AUDIO_SERVICE_TYPE_NB , ///< Not part of ABI
253 * @ingroup lavc_encoding
255 typedef struct RcOverride{
258 int qscale; // If this is 0 then quality_factor will be used instead.
259 float quality_factor;
263 These flags can be passed in AVCodecContext.flags before initialization.
264 Note: Not everything is supported yet.
268 * Allow decoders to produce frames with data planes that are not aligned
269 * to CPU requirements (e.g. due to cropping).
271 #define AV_CODEC_FLAG_UNALIGNED (1 << 0)
275 #define AV_CODEC_FLAG_QSCALE (1 << 1)
277 * 4 MV per MB allowed / advanced prediction for H.263.
279 #define AV_CODEC_FLAG_4MV (1 << 2)
281 * Output even those frames that might be corrupted.
283 #define AV_CODEC_FLAG_OUTPUT_CORRUPT (1 << 3)
287 #define AV_CODEC_FLAG_QPEL (1 << 4)
289 * Don't output frames whose parameters differ from first
290 * decoded frame in stream.
292 #define AV_CODEC_FLAG_DROPCHANGED (1 << 5)
294 * Use internal 2pass ratecontrol in first pass mode.
296 #define AV_CODEC_FLAG_PASS1 (1 << 9)
298 * Use internal 2pass ratecontrol in second pass mode.
300 #define AV_CODEC_FLAG_PASS2 (1 << 10)
304 #define AV_CODEC_FLAG_LOOP_FILTER (1 << 11)
306 * Only decode/encode grayscale.
308 #define AV_CODEC_FLAG_GRAY (1 << 13)
310 * error[?] variables will be set during encoding.
312 #define AV_CODEC_FLAG_PSNR (1 << 15)
314 * Input bitstream might be truncated at a random location
315 * instead of only at frame boundaries.
317 #define AV_CODEC_FLAG_TRUNCATED (1 << 16)
319 * Use interlaced DCT.
321 #define AV_CODEC_FLAG_INTERLACED_DCT (1 << 18)
325 #define AV_CODEC_FLAG_LOW_DELAY (1 << 19)
327 * Place global headers in extradata instead of every keyframe.
329 #define AV_CODEC_FLAG_GLOBAL_HEADER (1 << 22)
331 * Use only bitexact stuff (except (I)DCT).
333 #define AV_CODEC_FLAG_BITEXACT (1 << 23)
334 /* Fx : Flag for H.263+ extra options */
336 * H.263 advanced intra coding / MPEG-4 AC prediction
338 #define AV_CODEC_FLAG_AC_PRED (1 << 24)
340 * interlaced motion estimation
342 #define AV_CODEC_FLAG_INTERLACED_ME (1 << 29)
343 #define AV_CODEC_FLAG_CLOSED_GOP (1U << 31)
346 * Allow non spec compliant speedup tricks.
348 #define AV_CODEC_FLAG2_FAST (1 << 0)
350 * Skip bitstream encoding.
352 #define AV_CODEC_FLAG2_NO_OUTPUT (1 << 2)
354 * Place global headers at every keyframe instead of in extradata.
356 #define AV_CODEC_FLAG2_LOCAL_HEADER (1 << 3)
359 * timecode is in drop frame format. DEPRECATED!!!!
361 #define AV_CODEC_FLAG2_DROP_FRAME_TIMECODE (1 << 13)
364 * Input bitstream might be truncated at a packet boundaries
365 * instead of only at frame boundaries.
367 #define AV_CODEC_FLAG2_CHUNKS (1 << 15)
369 * Discard cropping information from SPS.
371 #define AV_CODEC_FLAG2_IGNORE_CROP (1 << 16)
374 * Show all frames before the first keyframe
376 #define AV_CODEC_FLAG2_SHOW_ALL (1 << 22)
378 * Export motion vectors through frame side data
380 #define AV_CODEC_FLAG2_EXPORT_MVS (1 << 28)
382 * Do not skip samples and export skip information as frame side data
384 #define AV_CODEC_FLAG2_SKIP_MANUAL (1 << 29)
386 * Do not reset ASS ReadOrder field on flush (subtitles decoding)
388 #define AV_CODEC_FLAG2_RO_FLUSH_NOOP (1 << 30)
390 /* Unsupported options :
391 * Syntax Arithmetic coding (SAC)
392 * Reference Picture Selection
393 * Independent Segment Decoding */
395 /* codec capabilities */
397 /* Exported side data.
398 These flags can be passed in AVCodecContext.export_side_data before initialization.
401 * Export motion vectors through frame side data
403 #define AV_CODEC_EXPORT_DATA_MVS (1 << 0)
405 * Export encoder Producer Reference Time through packet side data
407 #define AV_CODEC_EXPORT_DATA_PRFT (1 << 1)
410 * Export the AVVideoEncParams structure through frame side data.
412 #define AV_CODEC_EXPORT_DATA_VIDEO_ENC_PARAMS (1 << 2)
416 * This specifies the area which should be displayed.
417 * Note there may be multiple such areas for one frame.
419 typedef struct AVPanScan {
422 * - encoding: Set by user.
423 * - decoding: Set by libavcodec.
428 * width and height in 1/16 pel
429 * - encoding: Set by user.
430 * - decoding: Set by libavcodec.
436 * position of the top left corner in 1/16 pel for up to 3 fields/frames
437 * - encoding: Set by user.
438 * - decoding: Set by libavcodec.
440 int16_t position[3][2];
444 * This structure describes the bitrate properties of an encoded bitstream. It
445 * roughly corresponds to a subset the VBV parameters for MPEG-2 or HRD
446 * parameters for H.264/HEVC.
448 typedef struct AVCPBProperties {
450 * Maximum bitrate of the stream, in bits per second.
451 * Zero if unknown or unspecified.
453 #if FF_API_UNSANITIZED_BITRATES
459 * Minimum bitrate of the stream, in bits per second.
460 * Zero if unknown or unspecified.
462 #if FF_API_UNSANITIZED_BITRATES
468 * Average bitrate of the stream, in bits per second.
469 * Zero if unknown or unspecified.
471 #if FF_API_UNSANITIZED_BITRATES
478 * The size of the buffer to which the ratecontrol is applied, in bits.
479 * Zero if unknown or unspecified.
484 * The delay between the time the packet this structure is associated with
485 * is received and the time when it should be decoded, in periods of a 27MHz
488 * UINT64_MAX when unknown or unspecified.
494 * This structure supplies correlation between a packet timestamp and a wall clock
495 * production time. The definition follows the Producer Reference Time ('prft')
496 * as defined in ISO/IEC 14496-12
498 typedef struct AVProducerReferenceTime {
500 * A UTC timestamp, in microseconds, since Unix epoch (e.g, av_gettime()).
504 } AVProducerReferenceTime;
507 * The decoder will keep a reference to the frame and may reuse it later.
509 #define AV_GET_BUFFER_FLAG_REF (1 << 0)
511 struct AVCodecInternal;
514 * main external API structure.
515 * New fields can be added to the end with minor version bumps.
516 * Removal, reordering and changes to existing fields require a major
518 * You can use AVOptions (av_opt* / av_set/get*()) to access these fields from user
520 * The name string for AVOptions options matches the associated command line
521 * parameter name and can be found in libavcodec/options_table.h
522 * The AVOption/command line parameter names differ in some cases from the C
523 * structure field names for historic reasons or brevity.
524 * sizeof(AVCodecContext) must not be used outside libav*.
526 typedef struct AVCodecContext {
528 * information on struct for av_log
529 * - set by avcodec_alloc_context3
531 const AVClass *av_class;
532 int log_level_offset;
534 enum AVMediaType codec_type; /* see AVMEDIA_TYPE_xxx */
535 const struct AVCodec *codec;
536 enum AVCodecID codec_id; /* see AV_CODEC_ID_xxx */
539 * fourcc (LSB first, so "ABCD" -> ('D'<<24) + ('C'<<16) + ('B'<<8) + 'A').
540 * This is used to work around some encoder bugs.
541 * A demuxer should set this to what is stored in the field used to identify the codec.
542 * If there are multiple such fields in a container then the demuxer should choose the one
543 * which maximizes the information about the used codec.
544 * If the codec tag field in a container is larger than 32 bits then the demuxer should
545 * remap the longer ID to 32 bits with a table or other structure. Alternatively a new
546 * extra_codec_tag + size could be added but for this a clear advantage must be demonstrated
548 * - encoding: Set by user, if not then the default based on codec_id will be used.
549 * - decoding: Set by user, will be converted to uppercase by libavcodec during init.
551 unsigned int codec_tag;
556 * Private context used for internal data.
558 * Unlike priv_data, this is not codec-specific. It is used in general
559 * libavcodec functions.
561 struct AVCodecInternal *internal;
564 * Private data of the user, can be used to carry app specific stuff.
565 * - encoding: Set by user.
566 * - decoding: Set by user.
571 * the average bitrate
572 * - encoding: Set by user; unused for constant quantizer encoding.
573 * - decoding: Set by user, may be overwritten by libavcodec
574 * if this info is available in the stream
579 * number of bits the bitstream is allowed to diverge from the reference.
580 * the reference can be CBR (for CBR pass1) or VBR (for pass2)
581 * - encoding: Set by user; unused for constant quantizer encoding.
584 int bit_rate_tolerance;
587 * Global quality for codecs which cannot change it per frame.
588 * This should be proportional to MPEG-1/2/4 qscale.
589 * - encoding: Set by user.
595 * - encoding: Set by user.
598 int compression_level;
599 #define FF_COMPRESSION_DEFAULT -1
603 * - encoding: Set by user.
604 * - decoding: Set by user.
610 * - encoding: Set by user.
611 * - decoding: Set by user.
616 * some codecs need / can use extradata like Huffman tables.
617 * MJPEG: Huffman tables
618 * rv10: additional flags
619 * MPEG-4: global headers (they can be in the bitstream or here)
620 * The allocated memory should be AV_INPUT_BUFFER_PADDING_SIZE bytes larger
621 * than extradata_size to avoid problems if it is read with the bitstream reader.
622 * The bytewise contents of extradata must not depend on the architecture or CPU endianness.
623 * Must be allocated with the av_malloc() family of functions.
624 * - encoding: Set/allocated/freed by libavcodec.
625 * - decoding: Set/allocated/freed by user.
631 * This is the fundamental unit of time (in seconds) in terms
632 * of which frame timestamps are represented. For fixed-fps content,
633 * timebase should be 1/framerate and timestamp increments should be
635 * This often, but not always is the inverse of the frame rate or field rate
636 * for video. 1/time_base is not the average frame rate if the frame rate is not
639 * Like containers, elementary streams also can store timestamps, 1/time_base
640 * is the unit in which these timestamps are specified.
641 * As example of such codec time base see ISO/IEC 14496-2:2001(E)
642 * vop_time_increment_resolution and fixed_vop_rate
643 * (fixed_vop_rate == 0 implies that it is different from the framerate)
645 * - encoding: MUST be set by user.
646 * - decoding: the use of this field for decoding is deprecated.
647 * Use framerate instead.
649 AVRational time_base;
652 * For some codecs, the time base is closer to the field rate than the frame rate.
653 * Most notably, H.264 and MPEG-2 specify time_base as half of frame duration
654 * if no telecine is used ...
656 * Set to time_base ticks per frame. Default 1, e.g., H.264/MPEG-2 set it to 2.
663 * Encoding: Number of frames delay there will be from the encoder input to
664 * the decoder output. (we assume the decoder matches the spec)
665 * Decoding: Number of frames delay in addition to what a standard decoder
666 * as specified in the spec would produce.
669 * Number of frames the decoded output will be delayed relative to the
673 * For encoding, this field is unused (see initial_padding).
675 * For decoding, this is the number of samples the decoder needs to
676 * output before the decoder's output is valid. When seeking, you should
677 * start decoding this many samples prior to your desired seek point.
679 * - encoding: Set by libavcodec.
680 * - decoding: Set by libavcodec.
687 * picture width / height.
689 * @note Those fields may not match the values of the last
690 * AVFrame output by avcodec_decode_video2 due frame
693 * - encoding: MUST be set by user.
694 * - decoding: May be set by the user before opening the decoder if known e.g.
695 * from the container. Some decoders will require the dimensions
696 * to be set by the caller. During decoding, the decoder may
697 * overwrite those values as required while parsing the data.
702 * Bitstream width / height, may be different from width/height e.g. when
703 * the decoded frame is cropped before being output or lowres is enabled.
705 * @note Those field may not match the value of the last
706 * AVFrame output by avcodec_receive_frame() due frame
710 * - decoding: May be set by the user before opening the decoder if known
711 * e.g. from the container. During decoding, the decoder may
712 * overwrite those values as required while parsing the data.
714 int coded_width, coded_height;
717 * the number of pictures in a group of pictures, or 0 for intra_only
718 * - encoding: Set by user.
724 * Pixel format, see AV_PIX_FMT_xxx.
725 * May be set by the demuxer if known from headers.
726 * May be overridden by the decoder if it knows better.
728 * @note This field may not match the value of the last
729 * AVFrame output by avcodec_receive_frame() due frame
732 * - encoding: Set by user.
733 * - decoding: Set by user if known, overridden by libavcodec while
736 enum AVPixelFormat pix_fmt;
739 * If non NULL, 'draw_horiz_band' is called by the libavcodec
740 * decoder to draw a horizontal band. It improves cache usage. Not
741 * all codecs can do that. You must check the codec capabilities
743 * When multithreading is used, it may be called from multiple threads
744 * at the same time; threads might draw different parts of the same AVFrame,
745 * or multiple AVFrames, and there is no guarantee that slices will be drawn
747 * The function is also used by hardware acceleration APIs.
748 * It is called at least once during frame decoding to pass
749 * the data needed for hardware render.
750 * In that mode instead of pixel data, AVFrame points to
751 * a structure specific to the acceleration API. The application
752 * reads the structure and can change some fields to indicate progress
755 * - decoding: Set by user.
756 * @param height the height of the slice
757 * @param y the y position of the slice
758 * @param type 1->top field, 2->bottom field, 3->frame
759 * @param offset offset into the AVFrame.data from which the slice should be read
761 void (*draw_horiz_band)(struct AVCodecContext *s,
762 const AVFrame *src, int offset[AV_NUM_DATA_POINTERS],
763 int y, int type, int height);
766 * callback to negotiate the pixelFormat
767 * @param fmt is the list of formats which are supported by the codec,
768 * it is terminated by -1 as 0 is a valid format, the formats are ordered by quality.
769 * The first is always the native one.
770 * @note The callback may be called again immediately if initialization for
771 * the selected (hardware-accelerated) pixel format failed.
772 * @warning Behavior is undefined if the callback returns a value not
773 * in the fmt list of formats.
774 * @return the chosen format
776 * - decoding: Set by user, if not set the native format will be chosen.
778 enum AVPixelFormat (*get_format)(struct AVCodecContext *s, const enum AVPixelFormat * fmt);
781 * maximum number of B-frames between non-B-frames
782 * Note: The output will be delayed by max_b_frames+1 relative to the input.
783 * - encoding: Set by user.
789 * qscale factor between IP and B-frames
790 * If > 0 then the last P-frame quantizer will be used (q= lastp_q*factor+offset).
791 * If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset).
792 * - encoding: Set by user.
795 float b_quant_factor;
797 #if FF_API_PRIVATE_OPT
798 /** @deprecated use encoder private options instead */
800 int b_frame_strategy;
804 * qscale offset between IP and B-frames
805 * - encoding: Set by user.
808 float b_quant_offset;
811 * Size of the frame reordering buffer in the decoder.
812 * For MPEG-2 it is 1 IPB or 0 low delay IP.
813 * - encoding: Set by libavcodec.
814 * - decoding: Set by libavcodec.
818 #if FF_API_PRIVATE_OPT
819 /** @deprecated use encoder private options instead */
825 * qscale factor between P- and I-frames
826 * If > 0 then the last P-frame quantizer will be used (q = lastp_q * factor + offset).
827 * If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset).
828 * - encoding: Set by user.
831 float i_quant_factor;
834 * qscale offset between P and I-frames
835 * - encoding: Set by user.
838 float i_quant_offset;
841 * luminance masking (0-> disabled)
842 * - encoding: Set by user.
848 * temporary complexity masking (0-> disabled)
849 * - encoding: Set by user.
852 float temporal_cplx_masking;
855 * spatial complexity masking (0-> disabled)
856 * - encoding: Set by user.
859 float spatial_cplx_masking;
862 * p block masking (0-> disabled)
863 * - encoding: Set by user.
869 * darkness masking (0-> disabled)
870 * - encoding: Set by user.
877 * - encoding: Set by libavcodec.
878 * - decoding: Set by user (or 0).
882 #if FF_API_PRIVATE_OPT
883 /** @deprecated use encoder private options instead */
885 int prediction_method;
886 #define FF_PRED_LEFT 0
887 #define FF_PRED_PLANE 1
888 #define FF_PRED_MEDIAN 2
892 * slice offsets in the frame in bytes
893 * - encoding: Set/allocated by libavcodec.
894 * - decoding: Set/allocated by user (or NULL).
899 * sample aspect ratio (0 if unknown)
900 * That is the width of a pixel divided by the height of the pixel.
901 * Numerator and denominator must be relatively prime and smaller than 256 for some video standards.
902 * - encoding: Set by user.
903 * - decoding: Set by libavcodec.
905 AVRational sample_aspect_ratio;
908 * motion estimation comparison function
909 * - encoding: Set by user.
914 * subpixel motion estimation comparison function
915 * - encoding: Set by user.
920 * macroblock comparison function (not supported yet)
921 * - encoding: Set by user.
926 * interlaced DCT comparison function
927 * - encoding: Set by user.
933 #define FF_CMP_SATD 2
935 #define FF_CMP_PSNR 4
938 #define FF_CMP_ZERO 7
939 #define FF_CMP_VSAD 8
940 #define FF_CMP_VSSE 9
941 #define FF_CMP_NSSE 10
942 #define FF_CMP_W53 11
943 #define FF_CMP_W97 12
944 #define FF_CMP_DCTMAX 13
945 #define FF_CMP_DCT264 14
946 #define FF_CMP_MEDIAN_SAD 15
947 #define FF_CMP_CHROMA 256
950 * ME diamond size & shape
951 * - encoding: Set by user.
957 * amount of previous MV predictors (2a+1 x 2a+1 square)
958 * - encoding: Set by user.
961 int last_predictor_count;
963 #if FF_API_PRIVATE_OPT
964 /** @deprecated use encoder private options instead */
970 * motion estimation prepass comparison function
971 * - encoding: Set by user.
977 * ME prepass diamond size & shape
978 * - encoding: Set by user.
985 * - encoding: Set by user.
988 int me_subpel_quality;
991 * maximum motion estimation search range in subpel units
992 * If 0 then no limit.
994 * - encoding: Set by user.
1001 * - encoding: unused
1002 * - decoding: Set by user.
1005 #define SLICE_FLAG_CODED_ORDER 0x0001 ///< draw_horiz_band() is called in coded order instead of display
1006 #define SLICE_FLAG_ALLOW_FIELD 0x0002 ///< allow draw_horiz_band() with field slices (MPEG-2 field pics)
1007 #define SLICE_FLAG_ALLOW_PLANE 0x0004 ///< allow draw_horiz_band() with 1 component at a time (SVQ1)
1010 * macroblock decision mode
1011 * - encoding: Set by user.
1012 * - decoding: unused
1015 #define FF_MB_DECISION_SIMPLE 0 ///< uses mb_cmp
1016 #define FF_MB_DECISION_BITS 1 ///< chooses the one which needs the fewest bits
1017 #define FF_MB_DECISION_RD 2 ///< rate distortion
1020 * custom intra quantization matrix
1021 * Must be allocated with the av_malloc() family of functions, and will be freed in
1022 * avcodec_free_context().
1023 * - encoding: Set/allocated by user, freed by libavcodec. Can be NULL.
1024 * - decoding: Set/allocated/freed by libavcodec.
1026 uint16_t *intra_matrix;
1029 * custom inter quantization matrix
1030 * Must be allocated with the av_malloc() family of functions, and will be freed in
1031 * avcodec_free_context().
1032 * - encoding: Set/allocated by user, freed by libavcodec. Can be NULL.
1033 * - decoding: Set/allocated/freed by libavcodec.
1035 uint16_t *inter_matrix;
1037 #if FF_API_PRIVATE_OPT
1038 /** @deprecated use encoder private options instead */
1039 attribute_deprecated
1040 int scenechange_threshold;
1042 /** @deprecated use encoder private options instead */
1043 attribute_deprecated
1044 int noise_reduction;
1048 * precision of the intra DC coefficient - 8
1049 * - encoding: Set by user.
1050 * - decoding: Set by libavcodec
1052 int intra_dc_precision;
1055 * Number of macroblock rows at the top which are skipped.
1056 * - encoding: unused
1057 * - decoding: Set by user.
1062 * Number of macroblock rows at the bottom which are skipped.
1063 * - encoding: unused
1064 * - decoding: Set by user.
1069 * minimum MB Lagrange multiplier
1070 * - encoding: Set by user.
1071 * - decoding: unused
1076 * maximum MB Lagrange multiplier
1077 * - encoding: Set by user.
1078 * - decoding: unused
1082 #if FF_API_PRIVATE_OPT
1084 * @deprecated use encoder private options instead
1086 attribute_deprecated
1087 int me_penalty_compensation;
1091 * - encoding: Set by user.
1092 * - decoding: unused
1096 #if FF_API_PRIVATE_OPT
1097 /** @deprecated use encoder private options instead */
1098 attribute_deprecated
1104 * - encoding: Set by user.
1105 * - decoding: unused
1110 * number of reference frames
1111 * - encoding: Set by user.
1112 * - decoding: Set by lavc.
1116 #if FF_API_PRIVATE_OPT
1117 /** @deprecated use encoder private options instead */
1118 attribute_deprecated
1123 * Note: Value depends upon the compare function used for fullpel ME.
1124 * - encoding: Set by user.
1125 * - decoding: unused
1129 #if FF_API_PRIVATE_OPT
1130 /** @deprecated use encoder private options instead */
1131 attribute_deprecated
1136 * Chromaticity coordinates of the source primaries.
1137 * - encoding: Set by user
1138 * - decoding: Set by libavcodec
1140 enum AVColorPrimaries color_primaries;
1143 * Color Transfer Characteristic.
1144 * - encoding: Set by user
1145 * - decoding: Set by libavcodec
1147 enum AVColorTransferCharacteristic color_trc;
1150 * YUV colorspace type.
1151 * - encoding: Set by user
1152 * - decoding: Set by libavcodec
1154 enum AVColorSpace colorspace;
1157 * MPEG vs JPEG YUV range.
1158 * - encoding: Set by user
1159 * - decoding: Set by libavcodec
1161 enum AVColorRange color_range;
1164 * This defines the location of chroma samples.
1165 * - encoding: Set by user
1166 * - decoding: Set by libavcodec
1168 enum AVChromaLocation chroma_sample_location;
1172 * Indicates number of picture subdivisions. Used for parallelized
1174 * - encoding: Set by user
1175 * - decoding: unused
1180 * - encoding: set by libavcodec
1181 * - decoding: Set by user.
1183 enum AVFieldOrder field_order;
1186 int sample_rate; ///< samples per second
1187 int channels; ///< number of audio channels
1190 * audio sample format
1191 * - encoding: Set by user.
1192 * - decoding: Set by libavcodec.
1194 enum AVSampleFormat sample_fmt; ///< sample format
1196 /* The following data should not be initialized. */
1198 * Number of samples per channel in an audio frame.
1200 * - encoding: set by libavcodec in avcodec_open2(). Each submitted frame
1201 * except the last must contain exactly frame_size samples per channel.
1202 * May be 0 when the codec has AV_CODEC_CAP_VARIABLE_FRAME_SIZE set, then the
1203 * frame size is not restricted.
1204 * - decoding: may be set by some decoders to indicate constant frame size
1209 * Frame counter, set by libavcodec.
1211 * - decoding: total number of frames returned from the decoder so far.
1212 * - encoding: total number of frames passed to the encoder so far.
1214 * @note the counter is not incremented if encoding/decoding resulted in
1220 * number of bytes per packet if constant and known or 0
1221 * Used by some WAV based audio codecs.
1226 * Audio cutoff bandwidth (0 means "automatic")
1227 * - encoding: Set by user.
1228 * - decoding: unused
1233 * Audio channel layout.
1234 * - encoding: set by user.
1235 * - decoding: set by user, may be overwritten by libavcodec.
1237 uint64_t channel_layout;
1240 * Request decoder to use this channel layout if it can (0 for default)
1241 * - encoding: unused
1242 * - decoding: Set by user.
1244 uint64_t request_channel_layout;
1247 * Type of service that the audio stream conveys.
1248 * - encoding: Set by user.
1249 * - decoding: Set by libavcodec.
1251 enum AVAudioServiceType audio_service_type;
1254 * desired sample format
1255 * - encoding: Not used.
1256 * - decoding: Set by user.
1257 * Decoder will decode to this format if it can.
1259 enum AVSampleFormat request_sample_fmt;
1262 * This callback is called at the beginning of each frame to get data
1263 * buffer(s) for it. There may be one contiguous buffer for all the data or
1264 * there may be a buffer per each data plane or anything in between. What
1265 * this means is, you may set however many entries in buf[] you feel necessary.
1266 * Each buffer must be reference-counted using the AVBuffer API (see description
1269 * The following fields will be set in the frame before this callback is
1272 * - width, height (video only)
1273 * - sample_rate, channel_layout, nb_samples (audio only)
1274 * Their values may differ from the corresponding values in
1275 * AVCodecContext. This callback must use the frame values, not the codec
1276 * context values, to calculate the required buffer size.
1278 * This callback must fill the following fields in the frame:
1282 * * if the data is planar audio with more than 8 channels, then this
1283 * callback must allocate and fill extended_data to contain all pointers
1284 * to all data planes. data[] must hold as many pointers as it can.
1285 * extended_data must be allocated with av_malloc() and will be freed in
1287 * * otherwise extended_data must point to data
1288 * - buf[] must contain one or more pointers to AVBufferRef structures. Each of
1289 * the frame's data and extended_data pointers must be contained in these. That
1290 * is, one AVBufferRef for each allocated chunk of memory, not necessarily one
1291 * AVBufferRef per data[] entry. See: av_buffer_create(), av_buffer_alloc(),
1292 * and av_buffer_ref().
1293 * - extended_buf and nb_extended_buf must be allocated with av_malloc() by
1294 * this callback and filled with the extra buffers if there are more
1295 * buffers than buf[] can hold. extended_buf will be freed in
1298 * If AV_CODEC_CAP_DR1 is not set then get_buffer2() must call
1299 * avcodec_default_get_buffer2() instead of providing buffers allocated by
1302 * Each data plane must be aligned to the maximum required by the target
1305 * @see avcodec_default_get_buffer2()
1309 * If AV_GET_BUFFER_FLAG_REF is set in flags then the frame may be reused
1310 * (read and/or written to if it is writable) later by libavcodec.
1312 * avcodec_align_dimensions2() should be used to find the required width and
1313 * height, as they normally need to be rounded up to the next multiple of 16.
1315 * Some decoders do not support linesizes changing between frames.
1317 * If frame multithreading is used and thread_safe_callbacks is set,
1318 * this callback may be called from a different thread, but not from more
1319 * than one at once. Does not need to be reentrant.
1321 * @see avcodec_align_dimensions2()
1325 * Decoders request a buffer of a particular size by setting
1326 * AVFrame.nb_samples prior to calling get_buffer2(). The decoder may,
1327 * however, utilize only part of the buffer by setting AVFrame.nb_samples
1328 * to a smaller value in the output frame.
1330 * As a convenience, av_samples_get_buffer_size() and
1331 * av_samples_fill_arrays() in libavutil may be used by custom get_buffer2()
1332 * functions to find the required data size and to fill data pointers and
1333 * linesize. In AVFrame.linesize, only linesize[0] may be set for audio
1334 * since all planes must be the same size.
1336 * @see av_samples_get_buffer_size(), av_samples_fill_arrays()
1338 * - encoding: unused
1339 * - decoding: Set by libavcodec, user can override.
1341 int (*get_buffer2)(struct AVCodecContext *s, AVFrame *frame, int flags);
1344 * If non-zero, the decoded audio and video frames returned from
1345 * avcodec_decode_video2() and avcodec_decode_audio4() are reference-counted
1346 * and are valid indefinitely. The caller must free them with
1347 * av_frame_unref() when they are not needed anymore.
1348 * Otherwise, the decoded frames must not be freed by the caller and are
1349 * only valid until the next decode call.
1351 * This is always automatically enabled if avcodec_receive_frame() is used.
1353 * - encoding: unused
1354 * - decoding: set by the caller before avcodec_open2().
1356 attribute_deprecated
1357 int refcounted_frames;
1359 /* - encoding parameters */
1360 float qcompress; ///< amount of qscale change between easy & hard scenes (0.0-1.0)
1361 float qblur; ///< amount of qscale smoothing over time (0.0-1.0)
1365 * - encoding: Set by user.
1366 * - decoding: unused
1372 * - encoding: Set by user.
1373 * - decoding: unused
1378 * maximum quantizer difference between frames
1379 * - encoding: Set by user.
1380 * - decoding: unused
1385 * decoder bitstream buffer size
1386 * - encoding: Set by user.
1387 * - decoding: unused
1392 * ratecontrol override, see RcOverride
1393 * - encoding: Allocated/set/freed by user.
1394 * - decoding: unused
1396 int rc_override_count;
1397 RcOverride *rc_override;
1401 * - encoding: Set by user.
1402 * - decoding: Set by user, may be overwritten by libavcodec.
1404 int64_t rc_max_rate;
1408 * - encoding: Set by user.
1409 * - decoding: unused
1411 int64_t rc_min_rate;
1414 * Ratecontrol attempt to use, at maximum, <value> of what can be used without an underflow.
1415 * - encoding: Set by user.
1416 * - decoding: unused.
1418 float rc_max_available_vbv_use;
1421 * Ratecontrol attempt to use, at least, <value> times the amount needed to prevent a vbv overflow.
1422 * - encoding: Set by user.
1423 * - decoding: unused.
1425 float rc_min_vbv_overflow_use;
1428 * Number of bits which should be loaded into the rc buffer before decoding starts.
1429 * - encoding: Set by user.
1430 * - decoding: unused
1432 int rc_initial_buffer_occupancy;
1434 #if FF_API_CODER_TYPE
1435 #define FF_CODER_TYPE_VLC 0
1436 #define FF_CODER_TYPE_AC 1
1437 #define FF_CODER_TYPE_RAW 2
1438 #define FF_CODER_TYPE_RLE 3
1440 * @deprecated use encoder private options instead
1442 attribute_deprecated
1444 #endif /* FF_API_CODER_TYPE */
1446 #if FF_API_PRIVATE_OPT
1447 /** @deprecated use encoder private options instead */
1448 attribute_deprecated
1452 #if FF_API_PRIVATE_OPT
1453 /** @deprecated use encoder private options instead */
1454 attribute_deprecated
1455 int frame_skip_threshold;
1457 /** @deprecated use encoder private options instead */
1458 attribute_deprecated
1459 int frame_skip_factor;
1461 /** @deprecated use encoder private options instead */
1462 attribute_deprecated
1465 /** @deprecated use encoder private options instead */
1466 attribute_deprecated
1468 #endif /* FF_API_PRIVATE_OPT */
1471 * trellis RD quantization
1472 * - encoding: Set by user.
1473 * - decoding: unused
1477 #if FF_API_PRIVATE_OPT
1478 /** @deprecated use encoder private options instead */
1479 attribute_deprecated
1480 int min_prediction_order;
1482 /** @deprecated use encoder private options instead */
1483 attribute_deprecated
1484 int max_prediction_order;
1486 /** @deprecated use encoder private options instead */
1487 attribute_deprecated
1488 int64_t timecode_frame_start;
1491 #if FF_API_RTP_CALLBACK
1493 * @deprecated unused
1495 /* The RTP callback: This function is called */
1496 /* every time the encoder has a packet to send. */
1497 /* It depends on the encoder if the data starts */
1498 /* with a Start Code (it should). H.263 does. */
1499 /* mb_nb contains the number of macroblocks */
1500 /* encoded in the RTP payload. */
1501 attribute_deprecated
1502 void (*rtp_callback)(struct AVCodecContext *avctx, void *data, int size, int mb_nb);
1505 #if FF_API_PRIVATE_OPT
1506 /** @deprecated use encoder private options instead */
1507 attribute_deprecated
1508 int rtp_payload_size; /* The size of the RTP payload: the coder will */
1509 /* do its best to deliver a chunk with size */
1510 /* below rtp_payload_size, the chunk will start */
1511 /* with a start code on some codecs like H.263. */
1512 /* This doesn't take account of any particular */
1513 /* headers inside the transmitted RTP payload. */
1516 #if FF_API_STAT_BITS
1517 /* statistics, used for 2-pass encoding */
1518 attribute_deprecated
1520 attribute_deprecated
1522 attribute_deprecated
1524 attribute_deprecated
1526 attribute_deprecated
1528 attribute_deprecated
1530 attribute_deprecated
1532 attribute_deprecated
1535 /** @deprecated this field is unused */
1536 attribute_deprecated
1541 * pass1 encoding statistics output buffer
1542 * - encoding: Set by libavcodec.
1543 * - decoding: unused
1548 * pass2 encoding statistics input buffer
1549 * Concatenated stuff from stats_out of pass1 should be placed here.
1550 * - encoding: Allocated/set/freed by user.
1551 * - decoding: unused
1556 * Work around bugs in encoders which sometimes cannot be detected automatically.
1557 * - encoding: Set by user
1558 * - decoding: Set by user
1560 int workaround_bugs;
1561 #define FF_BUG_AUTODETECT 1 ///< autodetection
1562 #define FF_BUG_XVID_ILACE 4
1563 #define FF_BUG_UMP4 8
1564 #define FF_BUG_NO_PADDING 16
1565 #define FF_BUG_AMV 32
1566 #define FF_BUG_QPEL_CHROMA 64
1567 #define FF_BUG_STD_QPEL 128
1568 #define FF_BUG_QPEL_CHROMA2 256
1569 #define FF_BUG_DIRECT_BLOCKSIZE 512
1570 #define FF_BUG_EDGE 1024
1571 #define FF_BUG_HPEL_CHROMA 2048
1572 #define FF_BUG_DC_CLIP 4096
1573 #define FF_BUG_MS 8192 ///< Work around various bugs in Microsoft's broken decoders.
1574 #define FF_BUG_TRUNCATED 16384
1575 #define FF_BUG_IEDGE 32768
1578 * strictly follow the standard (MPEG-4, ...).
1579 * - encoding: Set by user.
1580 * - decoding: Set by user.
1581 * Setting this to STRICT or higher means the encoder and decoder will
1582 * generally do stupid things, whereas setting it to unofficial or lower
1583 * will mean the encoder might produce output that is not supported by all
1584 * spec-compliant decoders. Decoders don't differentiate between normal,
1585 * unofficial and experimental (that is, they always try to decode things
1586 * when they can) unless they are explicitly asked to behave stupidly
1587 * (=strictly conform to the specs)
1589 int strict_std_compliance;
1590 #define FF_COMPLIANCE_VERY_STRICT 2 ///< Strictly conform to an older more strict version of the spec or reference software.
1591 #define FF_COMPLIANCE_STRICT 1 ///< Strictly conform to all the things in the spec no matter what consequences.
1592 #define FF_COMPLIANCE_NORMAL 0
1593 #define FF_COMPLIANCE_UNOFFICIAL -1 ///< Allow unofficial extensions
1594 #define FF_COMPLIANCE_EXPERIMENTAL -2 ///< Allow nonstandardized experimental things.
1597 * error concealment flags
1598 * - encoding: unused
1599 * - decoding: Set by user.
1601 int error_concealment;
1602 #define FF_EC_GUESS_MVS 1
1603 #define FF_EC_DEBLOCK 2
1604 #define FF_EC_FAVOR_INTER 256
1608 * - encoding: Set by user.
1609 * - decoding: Set by user.
1612 #define FF_DEBUG_PICT_INFO 1
1613 #define FF_DEBUG_RC 2
1614 #define FF_DEBUG_BITSTREAM 4
1615 #define FF_DEBUG_MB_TYPE 8
1616 #define FF_DEBUG_QP 16
1619 * @deprecated this option does nothing
1621 #define FF_DEBUG_MV 32
1623 #define FF_DEBUG_DCT_COEFF 0x00000040
1624 #define FF_DEBUG_SKIP 0x00000080
1625 #define FF_DEBUG_STARTCODE 0x00000100
1626 #define FF_DEBUG_ER 0x00000400
1627 #define FF_DEBUG_MMCO 0x00000800
1628 #define FF_DEBUG_BUGS 0x00001000
1630 #define FF_DEBUG_VIS_QP 0x00002000
1631 #define FF_DEBUG_VIS_MB_TYPE 0x00004000
1633 #define FF_DEBUG_BUFFERS 0x00008000
1634 #define FF_DEBUG_THREADS 0x00010000
1635 #define FF_DEBUG_GREEN_MD 0x00800000
1636 #define FF_DEBUG_NOMC 0x01000000
1641 * - encoding: Set by user.
1642 * - decoding: Set by user.
1645 #define FF_DEBUG_VIS_MV_P_FOR 0x00000001 // visualize forward predicted MVs of P-frames
1646 #define FF_DEBUG_VIS_MV_B_FOR 0x00000002 // visualize forward predicted MVs of B-frames
1647 #define FF_DEBUG_VIS_MV_B_BACK 0x00000004 // visualize backward predicted MVs of B-frames
1651 * Error recognition; may misdetect some more or less valid parts as errors.
1652 * - encoding: unused
1653 * - decoding: Set by user.
1655 int err_recognition;
1658 * Verify checksums embedded in the bitstream (could be of either encoded or
1659 * decoded data, depending on the codec) and print an error message on mismatch.
1660 * If AV_EF_EXPLODE is also set, a mismatching checksum will result in the
1661 * decoder returning an error.
1663 #define AV_EF_CRCCHECK (1<<0)
1664 #define AV_EF_BITSTREAM (1<<1) ///< detect bitstream specification deviations
1665 #define AV_EF_BUFFER (1<<2) ///< detect improper bitstream length
1666 #define AV_EF_EXPLODE (1<<3) ///< abort decoding on minor error detection
1668 #define AV_EF_IGNORE_ERR (1<<15) ///< ignore errors and continue
1669 #define AV_EF_CAREFUL (1<<16) ///< consider things that violate the spec, are fast to calculate and have not been seen in the wild as errors
1670 #define AV_EF_COMPLIANT (1<<17) ///< consider all spec non compliances as errors
1671 #define AV_EF_AGGRESSIVE (1<<18) ///< consider things that a sane encoder should not do as an error
1675 * opaque 64-bit number (generally a PTS) that will be reordered and
1676 * output in AVFrame.reordered_opaque
1677 * - encoding: Set by libavcodec to the reordered_opaque of the input
1678 * frame corresponding to the last returned packet. Only
1679 * supported by encoders with the
1680 * AV_CODEC_CAP_ENCODER_REORDERED_OPAQUE capability.
1681 * - decoding: Set by user.
1683 int64_t reordered_opaque;
1686 * Hardware accelerator in use
1687 * - encoding: unused.
1688 * - decoding: Set by libavcodec
1690 const struct AVHWAccel *hwaccel;
1693 * Hardware accelerator context.
1694 * For some hardware accelerators, a global context needs to be
1695 * provided by the user. In that case, this holds display-dependent
1696 * data FFmpeg cannot instantiate itself. Please refer to the
1697 * FFmpeg HW accelerator documentation to know how to fill this
1698 * is. e.g. for VA API, this is a struct vaapi_context.
1699 * - encoding: unused
1700 * - decoding: Set by user
1702 void *hwaccel_context;
1706 * - encoding: Set by libavcodec if flags & AV_CODEC_FLAG_PSNR.
1707 * - decoding: unused
1709 uint64_t error[AV_NUM_DATA_POINTERS];
1712 * DCT algorithm, see FF_DCT_* below
1713 * - encoding: Set by user.
1714 * - decoding: unused
1717 #define FF_DCT_AUTO 0
1718 #define FF_DCT_FASTINT 1
1719 #define FF_DCT_INT 2
1720 #define FF_DCT_MMX 3
1721 #define FF_DCT_ALTIVEC 5
1722 #define FF_DCT_FAAN 6
1725 * IDCT algorithm, see FF_IDCT_* below.
1726 * - encoding: Set by user.
1727 * - decoding: Set by user.
1730 #define FF_IDCT_AUTO 0
1731 #define FF_IDCT_INT 1
1732 #define FF_IDCT_SIMPLE 2
1733 #define FF_IDCT_SIMPLEMMX 3
1734 #define FF_IDCT_ARM 7
1735 #define FF_IDCT_ALTIVEC 8
1736 #define FF_IDCT_SIMPLEARM 10
1737 #define FF_IDCT_XVID 14
1738 #define FF_IDCT_SIMPLEARMV5TE 16
1739 #define FF_IDCT_SIMPLEARMV6 17
1740 #define FF_IDCT_FAAN 20
1741 #define FF_IDCT_SIMPLENEON 22
1742 #define FF_IDCT_NONE 24 /* Used by XvMC to extract IDCT coefficients with FF_IDCT_PERM_NONE */
1743 #define FF_IDCT_SIMPLEAUTO 128
1746 * bits per sample/pixel from the demuxer (needed for huffyuv).
1747 * - encoding: Set by libavcodec.
1748 * - decoding: Set by user.
1750 int bits_per_coded_sample;
1753 * Bits per sample/pixel of internal libavcodec pixel/sample format.
1754 * - encoding: set by user.
1755 * - decoding: set by libavcodec.
1757 int bits_per_raw_sample;
1761 * low resolution decoding, 1-> 1/2 size, 2->1/4 size
1762 * - encoding: unused
1763 * - decoding: Set by user.
1768 #if FF_API_CODED_FRAME
1770 * the picture in the bitstream
1771 * - encoding: Set by libavcodec.
1772 * - decoding: unused
1774 * @deprecated use the quality factor packet side data instead
1776 attribute_deprecated AVFrame *coded_frame;
1781 * is used to decide how many independent tasks should be passed to execute()
1782 * - encoding: Set by user.
1783 * - decoding: Set by user.
1788 * Which multithreading methods to use.
1789 * Use of FF_THREAD_FRAME will increase decoding delay by one frame per thread,
1790 * so clients which cannot provide future frames should not use it.
1792 * - encoding: Set by user, otherwise the default is used.
1793 * - decoding: Set by user, otherwise the default is used.
1796 #define FF_THREAD_FRAME 1 ///< Decode more than one frame at once
1797 #define FF_THREAD_SLICE 2 ///< Decode more than one part of a single frame at once
1800 * Which multithreading methods are in use by the codec.
1801 * - encoding: Set by libavcodec.
1802 * - decoding: Set by libavcodec.
1804 int active_thread_type;
1807 * Set by the client if its custom get_buffer() callback can be called
1808 * synchronously from another thread, which allows faster multithreaded decoding.
1809 * draw_horiz_band() will be called from other threads regardless of this setting.
1810 * Ignored if the default get_buffer() is used.
1811 * - encoding: Set by user.
1812 * - decoding: Set by user.
1814 int thread_safe_callbacks;
1817 * The codec may call this to execute several independent things.
1818 * It will return only after finishing all tasks.
1819 * The user may replace this with some multithreaded implementation,
1820 * the default implementation will execute the parts serially.
1821 * @param count the number of things to execute
1822 * - encoding: Set by libavcodec, user can override.
1823 * - decoding: Set by libavcodec, user can override.
1825 int (*execute)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg), void *arg2, int *ret, int count, int size);
1828 * The codec may call this to execute several independent things.
1829 * It will return only after finishing all tasks.
1830 * The user may replace this with some multithreaded implementation,
1831 * the default implementation will execute the parts serially.
1832 * Also see avcodec_thread_init and e.g. the --enable-pthread configure option.
1833 * @param c context passed also to func
1834 * @param count the number of things to execute
1835 * @param arg2 argument passed unchanged to func
1836 * @param ret return values of executed functions, must have space for "count" values. May be NULL.
1837 * @param func function that will be called count times, with jobnr from 0 to count-1.
1838 * threadnr will be in the range 0 to c->thread_count-1 < MAX_THREADS and so that no
1839 * two instances of func executing at the same time will have the same threadnr.
1840 * @return always 0 currently, but code should handle a future improvement where when any call to func
1841 * returns < 0 no further calls to func may be done and < 0 is returned.
1842 * - encoding: Set by libavcodec, user can override.
1843 * - decoding: Set by libavcodec, user can override.
1845 int (*execute2)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg, int jobnr, int threadnr), void *arg2, int *ret, int count);
1848 * noise vs. sse weight for the nsse comparison function
1849 * - encoding: Set by user.
1850 * - decoding: unused
1856 * - encoding: Set by user.
1857 * - decoding: Set by libavcodec.
1860 #define FF_PROFILE_UNKNOWN -99
1861 #define FF_PROFILE_RESERVED -100
1863 #define FF_PROFILE_AAC_MAIN 0
1864 #define FF_PROFILE_AAC_LOW 1
1865 #define FF_PROFILE_AAC_SSR 2
1866 #define FF_PROFILE_AAC_LTP 3
1867 #define FF_PROFILE_AAC_HE 4
1868 #define FF_PROFILE_AAC_HE_V2 28
1869 #define FF_PROFILE_AAC_LD 22
1870 #define FF_PROFILE_AAC_ELD 38
1871 #define FF_PROFILE_MPEG2_AAC_LOW 128
1872 #define FF_PROFILE_MPEG2_AAC_HE 131
1874 #define FF_PROFILE_DNXHD 0
1875 #define FF_PROFILE_DNXHR_LB 1
1876 #define FF_PROFILE_DNXHR_SQ 2
1877 #define FF_PROFILE_DNXHR_HQ 3
1878 #define FF_PROFILE_DNXHR_HQX 4
1879 #define FF_PROFILE_DNXHR_444 5
1881 #define FF_PROFILE_DTS 20
1882 #define FF_PROFILE_DTS_ES 30
1883 #define FF_PROFILE_DTS_96_24 40
1884 #define FF_PROFILE_DTS_HD_HRA 50
1885 #define FF_PROFILE_DTS_HD_MA 60
1886 #define FF_PROFILE_DTS_EXPRESS 70
1888 #define FF_PROFILE_MPEG2_422 0
1889 #define FF_PROFILE_MPEG2_HIGH 1
1890 #define FF_PROFILE_MPEG2_SS 2
1891 #define FF_PROFILE_MPEG2_SNR_SCALABLE 3
1892 #define FF_PROFILE_MPEG2_MAIN 4
1893 #define FF_PROFILE_MPEG2_SIMPLE 5
1895 #define FF_PROFILE_H264_CONSTRAINED (1<<9) // 8+1; constraint_set1_flag
1896 #define FF_PROFILE_H264_INTRA (1<<11) // 8+3; constraint_set3_flag
1898 #define FF_PROFILE_H264_BASELINE 66
1899 #define FF_PROFILE_H264_CONSTRAINED_BASELINE (66|FF_PROFILE_H264_CONSTRAINED)
1900 #define FF_PROFILE_H264_MAIN 77
1901 #define FF_PROFILE_H264_EXTENDED 88
1902 #define FF_PROFILE_H264_HIGH 100
1903 #define FF_PROFILE_H264_HIGH_10 110
1904 #define FF_PROFILE_H264_HIGH_10_INTRA (110|FF_PROFILE_H264_INTRA)
1905 #define FF_PROFILE_H264_MULTIVIEW_HIGH 118
1906 #define FF_PROFILE_H264_HIGH_422 122
1907 #define FF_PROFILE_H264_HIGH_422_INTRA (122|FF_PROFILE_H264_INTRA)
1908 #define FF_PROFILE_H264_STEREO_HIGH 128
1909 #define FF_PROFILE_H264_HIGH_444 144
1910 #define FF_PROFILE_H264_HIGH_444_PREDICTIVE 244
1911 #define FF_PROFILE_H264_HIGH_444_INTRA (244|FF_PROFILE_H264_INTRA)
1912 #define FF_PROFILE_H264_CAVLC_444 44
1914 #define FF_PROFILE_VC1_SIMPLE 0
1915 #define FF_PROFILE_VC1_MAIN 1
1916 #define FF_PROFILE_VC1_COMPLEX 2
1917 #define FF_PROFILE_VC1_ADVANCED 3
1919 #define FF_PROFILE_MPEG4_SIMPLE 0
1920 #define FF_PROFILE_MPEG4_SIMPLE_SCALABLE 1
1921 #define FF_PROFILE_MPEG4_CORE 2
1922 #define FF_PROFILE_MPEG4_MAIN 3
1923 #define FF_PROFILE_MPEG4_N_BIT 4
1924 #define FF_PROFILE_MPEG4_SCALABLE_TEXTURE 5
1925 #define FF_PROFILE_MPEG4_SIMPLE_FACE_ANIMATION 6
1926 #define FF_PROFILE_MPEG4_BASIC_ANIMATED_TEXTURE 7
1927 #define FF_PROFILE_MPEG4_HYBRID 8
1928 #define FF_PROFILE_MPEG4_ADVANCED_REAL_TIME 9
1929 #define FF_PROFILE_MPEG4_CORE_SCALABLE 10
1930 #define FF_PROFILE_MPEG4_ADVANCED_CODING 11
1931 #define FF_PROFILE_MPEG4_ADVANCED_CORE 12
1932 #define FF_PROFILE_MPEG4_ADVANCED_SCALABLE_TEXTURE 13
1933 #define FF_PROFILE_MPEG4_SIMPLE_STUDIO 14
1934 #define FF_PROFILE_MPEG4_ADVANCED_SIMPLE 15
1936 #define FF_PROFILE_JPEG2000_CSTREAM_RESTRICTION_0 1
1937 #define FF_PROFILE_JPEG2000_CSTREAM_RESTRICTION_1 2
1938 #define FF_PROFILE_JPEG2000_CSTREAM_NO_RESTRICTION 32768
1939 #define FF_PROFILE_JPEG2000_DCINEMA_2K 3
1940 #define FF_PROFILE_JPEG2000_DCINEMA_4K 4
1942 #define FF_PROFILE_VP9_0 0
1943 #define FF_PROFILE_VP9_1 1
1944 #define FF_PROFILE_VP9_2 2
1945 #define FF_PROFILE_VP9_3 3
1947 #define FF_PROFILE_HEVC_MAIN 1
1948 #define FF_PROFILE_HEVC_MAIN_10 2
1949 #define FF_PROFILE_HEVC_MAIN_STILL_PICTURE 3
1950 #define FF_PROFILE_HEVC_REXT 4
1952 #define FF_PROFILE_AV1_MAIN 0
1953 #define FF_PROFILE_AV1_HIGH 1
1954 #define FF_PROFILE_AV1_PROFESSIONAL 2
1956 #define FF_PROFILE_MJPEG_HUFFMAN_BASELINE_DCT 0xc0
1957 #define FF_PROFILE_MJPEG_HUFFMAN_EXTENDED_SEQUENTIAL_DCT 0xc1
1958 #define FF_PROFILE_MJPEG_HUFFMAN_PROGRESSIVE_DCT 0xc2
1959 #define FF_PROFILE_MJPEG_HUFFMAN_LOSSLESS 0xc3
1960 #define FF_PROFILE_MJPEG_JPEG_LS 0xf7
1962 #define FF_PROFILE_SBC_MSBC 1
1964 #define FF_PROFILE_PRORES_PROXY 0
1965 #define FF_PROFILE_PRORES_LT 1
1966 #define FF_PROFILE_PRORES_STANDARD 2
1967 #define FF_PROFILE_PRORES_HQ 3
1968 #define FF_PROFILE_PRORES_4444 4
1969 #define FF_PROFILE_PRORES_XQ 5
1971 #define FF_PROFILE_ARIB_PROFILE_A 0
1972 #define FF_PROFILE_ARIB_PROFILE_C 1
1976 * - encoding: Set by user.
1977 * - decoding: Set by libavcodec.
1980 #define FF_LEVEL_UNKNOWN -99
1983 * Skip loop filtering for selected frames.
1984 * - encoding: unused
1985 * - decoding: Set by user.
1987 enum AVDiscard skip_loop_filter;
1990 * Skip IDCT/dequantization for selected frames.
1991 * - encoding: unused
1992 * - decoding: Set by user.
1994 enum AVDiscard skip_idct;
1997 * Skip decoding for selected frames.
1998 * - encoding: unused
1999 * - decoding: Set by user.
2001 enum AVDiscard skip_frame;
2004 * Header containing style information for text subtitles.
2005 * For SUBTITLE_ASS subtitle type, it should contain the whole ASS
2006 * [Script Info] and [V4+ Styles] section, plus the [Events] line and
2007 * the Format line following. It shouldn't include any Dialogue line.
2008 * - encoding: Set/allocated/freed by user (before avcodec_open2())
2009 * - decoding: Set/allocated/freed by libavcodec (by avcodec_open2())
2011 uint8_t *subtitle_header;
2012 int subtitle_header_size;
2014 #if FF_API_VBV_DELAY
2016 * VBV delay coded in the last frame (in periods of a 27 MHz clock).
2017 * Used for compliant TS muxing.
2018 * - encoding: Set by libavcodec.
2019 * - decoding: unused.
2020 * @deprecated this value is now exported as a part of
2021 * AV_PKT_DATA_CPB_PROPERTIES packet side data
2023 attribute_deprecated
2027 #if FF_API_SIDEDATA_ONLY_PKT
2029 * Encoding only and set by default. Allow encoders to output packets
2030 * that do not contain any encoded data, only side data.
2032 * Some encoders need to output such packets, e.g. to update some stream
2033 * parameters at the end of encoding.
2035 * @deprecated this field disables the default behaviour and
2036 * it is kept only for compatibility.
2038 attribute_deprecated
2039 int side_data_only_packets;
2043 * Audio only. The number of "priming" samples (padding) inserted by the
2044 * encoder at the beginning of the audio. I.e. this number of leading
2045 * decoded samples must be discarded by the caller to get the original audio
2046 * without leading padding.
2048 * - decoding: unused
2049 * - encoding: Set by libavcodec. The timestamps on the output packets are
2050 * adjusted by the encoder so that they always refer to the
2051 * first sample of the data actually contained in the packet,
2052 * including any added padding. E.g. if the timebase is
2053 * 1/samplerate and the timestamp of the first input sample is
2054 * 0, the timestamp of the first output packet will be
2057 int initial_padding;
2060 * - decoding: For codecs that store a framerate value in the compressed
2061 * bitstream, the decoder may export it here. { 0, 1} when
2063 * - encoding: May be used to signal the framerate of CFR content to an
2066 AVRational framerate;
2069 * Nominal unaccelerated pixel format, see AV_PIX_FMT_xxx.
2070 * - encoding: unused.
2071 * - decoding: Set by libavcodec before calling get_format()
2073 enum AVPixelFormat sw_pix_fmt;
2076 * Timebase in which pkt_dts/pts and AVPacket.dts/pts are.
2077 * - encoding unused.
2078 * - decoding set by user.
2080 AVRational pkt_timebase;
2084 * - encoding: unused.
2085 * - decoding: set by libavcodec.
2087 const AVCodecDescriptor *codec_descriptor;
2091 * low resolution decoding, 1-> 1/2 size, 2->1/4 size
2092 * - encoding: unused
2093 * - decoding: Set by user.
2099 * Current statistics for PTS correction.
2100 * - decoding: maintained and used by libavcodec, not intended to be used by user apps
2101 * - encoding: unused
2103 int64_t pts_correction_num_faulty_pts; /// Number of incorrect PTS values so far
2104 int64_t pts_correction_num_faulty_dts; /// Number of incorrect DTS values so far
2105 int64_t pts_correction_last_pts; /// PTS of the last frame
2106 int64_t pts_correction_last_dts; /// DTS of the last frame
2109 * Character encoding of the input subtitles file.
2110 * - decoding: set by user
2111 * - encoding: unused
2116 * Subtitles character encoding mode. Formats or codecs might be adjusting
2117 * this setting (if they are doing the conversion themselves for instance).
2118 * - decoding: set by libavcodec
2119 * - encoding: unused
2121 int sub_charenc_mode;
2122 #define FF_SUB_CHARENC_MODE_DO_NOTHING -1 ///< do nothing (demuxer outputs a stream supposed to be already in UTF-8, or the codec is bitmap for instance)
2123 #define FF_SUB_CHARENC_MODE_AUTOMATIC 0 ///< libavcodec will select the mode itself
2124 #define FF_SUB_CHARENC_MODE_PRE_DECODER 1 ///< the AVPacket data needs to be recoded to UTF-8 before being fed to the decoder, requires iconv
2125 #define FF_SUB_CHARENC_MODE_IGNORE 2 ///< neither convert the subtitles, nor check them for valid UTF-8
2128 * Skip processing alpha if supported by codec.
2129 * Note that if the format uses pre-multiplied alpha (common with VP6,
2130 * and recommended due to better video quality/compression)
2131 * the image will look as if alpha-blended onto a black background.
2132 * However for formats that do not use pre-multiplied alpha
2133 * there might be serious artefacts (though e.g. libswscale currently
2134 * assumes pre-multiplied alpha anyway).
2136 * - decoding: set by user
2137 * - encoding: unused
2142 * Number of samples to skip after a discontinuity
2143 * - decoding: unused
2144 * - encoding: set by libavcodec
2148 #if !FF_API_DEBUG_MV
2150 * debug motion vectors
2151 * - encoding: Set by user.
2152 * - decoding: Set by user.
2155 #define FF_DEBUG_VIS_MV_P_FOR 0x00000001 //visualize forward predicted MVs of P frames
2156 #define FF_DEBUG_VIS_MV_B_FOR 0x00000002 //visualize forward predicted MVs of B frames
2157 #define FF_DEBUG_VIS_MV_B_BACK 0x00000004 //visualize backward predicted MVs of B frames
2161 * custom intra quantization matrix
2162 * - encoding: Set by user, can be NULL.
2163 * - decoding: unused.
2165 uint16_t *chroma_intra_matrix;
2168 * dump format separator.
2169 * can be ", " or "\n " or anything else
2170 * - encoding: Set by user.
2171 * - decoding: Set by user.
2173 uint8_t *dump_separator;
2176 * ',' separated list of allowed decoders.
2177 * If NULL then all are allowed
2178 * - encoding: unused
2179 * - decoding: set by user
2181 char *codec_whitelist;
2184 * Properties of the stream that gets decoded
2185 * - encoding: unused
2186 * - decoding: set by libavcodec
2188 unsigned properties;
2189 #define FF_CODEC_PROPERTY_LOSSLESS 0x00000001
2190 #define FF_CODEC_PROPERTY_CLOSED_CAPTIONS 0x00000002
2193 * Additional data associated with the entire coded stream.
2195 * - decoding: unused
2196 * - encoding: may be set by libavcodec after avcodec_open2().
2198 AVPacketSideData *coded_side_data;
2199 int nb_coded_side_data;
2202 * A reference to the AVHWFramesContext describing the input (for encoding)
2203 * or output (decoding) frames. The reference is set by the caller and
2204 * afterwards owned (and freed) by libavcodec - it should never be read by
2205 * the caller after being set.
2207 * - decoding: This field should be set by the caller from the get_format()
2208 * callback. The previous reference (if any) will always be
2209 * unreffed by libavcodec before the get_format() call.
2211 * If the default get_buffer2() is used with a hwaccel pixel
2212 * format, then this AVHWFramesContext will be used for
2213 * allocating the frame buffers.
2215 * - encoding: For hardware encoders configured to use a hwaccel pixel
2216 * format, this field should be set by the caller to a reference
2217 * to the AVHWFramesContext describing input frames.
2218 * AVHWFramesContext.format must be equal to
2219 * AVCodecContext.pix_fmt.
2221 * This field should be set before avcodec_open2() is called.
2223 AVBufferRef *hw_frames_ctx;
2226 * Control the form of AVSubtitle.rects[N]->ass
2227 * - decoding: set by user
2228 * - encoding: unused
2230 int sub_text_format;
2231 #define FF_SUB_TEXT_FMT_ASS 0
2232 #if FF_API_ASS_TIMING
2233 #define FF_SUB_TEXT_FMT_ASS_WITH_TIMINGS 1
2237 * Audio only. The amount of padding (in samples) appended by the encoder to
2238 * the end of the audio. I.e. this number of decoded samples must be
2239 * discarded by the caller from the end of the stream to get the original
2240 * audio without any trailing padding.
2242 * - decoding: unused
2243 * - encoding: unused
2245 int trailing_padding;
2248 * The number of pixels per image to maximally accept.
2250 * - decoding: set by user
2251 * - encoding: set by user
2256 * A reference to the AVHWDeviceContext describing the device which will
2257 * be used by a hardware encoder/decoder. The reference is set by the
2258 * caller and afterwards owned (and freed) by libavcodec.
2260 * This should be used if either the codec device does not require
2261 * hardware frames or any that are used are to be allocated internally by
2262 * libavcodec. If the user wishes to supply any of the frames used as
2263 * encoder input or decoder output then hw_frames_ctx should be used
2264 * instead. When hw_frames_ctx is set in get_format() for a decoder, this
2265 * field will be ignored while decoding the associated stream segment, but
2266 * may again be used on a following one after another get_format() call.
2268 * For both encoders and decoders this field should be set before
2269 * avcodec_open2() is called and must not be written to thereafter.
2271 * Note that some decoders may require this field to be set initially in
2272 * order to support hw_frames_ctx at all - in that case, all frames
2273 * contexts used must be created on the same device.
2275 AVBufferRef *hw_device_ctx;
2278 * Bit set of AV_HWACCEL_FLAG_* flags, which affect hardware accelerated
2279 * decoding (if active).
2280 * - encoding: unused
2281 * - decoding: Set by user (either before avcodec_open2(), or in the
2282 * AVCodecContext.get_format callback)
2287 * Video decoding only. Certain video codecs support cropping, meaning that
2288 * only a sub-rectangle of the decoded frame is intended for display. This
2289 * option controls how cropping is handled by libavcodec.
2291 * When set to 1 (the default), libavcodec will apply cropping internally.
2292 * I.e. it will modify the output frame width/height fields and offset the
2293 * data pointers (only by as much as possible while preserving alignment, or
2294 * by the full amount if the AV_CODEC_FLAG_UNALIGNED flag is set) so that
2295 * the frames output by the decoder refer only to the cropped area. The
2296 * crop_* fields of the output frames will be zero.
2298 * When set to 0, the width/height fields of the output frames will be set
2299 * to the coded dimensions and the crop_* fields will describe the cropping
2300 * rectangle. Applying the cropping is left to the caller.
2302 * @warning When hardware acceleration with opaque output frames is used,
2303 * libavcodec is unable to apply cropping from the top/left border.
2305 * @note when this option is set to zero, the width/height fields of the
2306 * AVCodecContext and output AVFrames have different meanings. The codec
2307 * context fields store display dimensions (with the coded dimensions in
2308 * coded_width/height), while the frame fields store the coded dimensions
2309 * (with the display dimensions being determined by the crop_* fields).
2314 * Video decoding only. Sets the number of extra hardware frames which
2315 * the decoder will allocate for use by the caller. This must be set
2316 * before avcodec_open2() is called.
2318 * Some hardware decoders require all frames that they will use for
2319 * output to be defined in advance before decoding starts. For such
2320 * decoders, the hardware frame pool must therefore be of a fixed size.
2321 * The extra frames set here are on top of any number that the decoder
2322 * needs internally in order to operate normally (for example, frames
2323 * used as reference pictures).
2325 int extra_hw_frames;
2328 * The percentage of damaged samples to discard a frame.
2330 * - decoding: set by user
2331 * - encoding: unused
2333 int discard_damaged_percentage;
2336 * The number of samples per frame to maximally accept.
2338 * - decoding: set by user
2339 * - encoding: set by user
2341 int64_t max_samples;
2344 * Bit set of AV_CODEC_EXPORT_DATA_* flags, which affects the kind of
2345 * metadata exported in frame, packet, or coded stream side data by
2346 * decoders and encoders.
2348 * - decoding: set by user
2349 * - encoding: set by user
2351 int export_side_data;
2354 #if FF_API_CODEC_GET_SET
2356 * Accessors for some AVCodecContext fields. These used to be provided for ABI
2357 * compatibility, and do not need to be used anymore.
2359 attribute_deprecated
2360 AVRational av_codec_get_pkt_timebase (const AVCodecContext *avctx);
2361 attribute_deprecated
2362 void av_codec_set_pkt_timebase (AVCodecContext *avctx, AVRational val);
2364 attribute_deprecated
2365 const AVCodecDescriptor *av_codec_get_codec_descriptor(const AVCodecContext *avctx);
2366 attribute_deprecated
2367 void av_codec_set_codec_descriptor(AVCodecContext *avctx, const AVCodecDescriptor *desc);
2369 attribute_deprecated
2370 unsigned av_codec_get_codec_properties(const AVCodecContext *avctx);
2373 attribute_deprecated
2374 int av_codec_get_lowres(const AVCodecContext *avctx);
2375 attribute_deprecated
2376 void av_codec_set_lowres(AVCodecContext *avctx, int val);
2379 attribute_deprecated
2380 int av_codec_get_seek_preroll(const AVCodecContext *avctx);
2381 attribute_deprecated
2382 void av_codec_set_seek_preroll(AVCodecContext *avctx, int val);
2384 attribute_deprecated
2385 uint16_t *av_codec_get_chroma_intra_matrix(const AVCodecContext *avctx);
2386 attribute_deprecated
2387 void av_codec_set_chroma_intra_matrix(AVCodecContext *avctx, uint16_t *val);
2392 #if FF_API_CODEC_GET_SET
2393 attribute_deprecated
2394 int av_codec_get_max_lowres(const AVCodec *codec);
2397 struct MpegEncContext;
2400 * @defgroup lavc_hwaccel AVHWAccel
2402 * @note Nothing in this structure should be accessed by the user. At some
2403 * point in future it will not be externally visible at all.
2407 typedef struct AVHWAccel {
2409 * Name of the hardware accelerated codec.
2410 * The name is globally unique among encoders and among decoders (but an
2411 * encoder and a decoder can share the same name).
2416 * Type of codec implemented by the hardware accelerator.
2418 * See AVMEDIA_TYPE_xxx
2420 enum AVMediaType type;
2423 * Codec implemented by the hardware accelerator.
2425 * See AV_CODEC_ID_xxx
2430 * Supported pixel format.
2432 * Only hardware accelerated formats are supported here.
2434 enum AVPixelFormat pix_fmt;
2437 * Hardware accelerated codec capabilities.
2438 * see AV_HWACCEL_CODEC_CAP_*
2442 /*****************************************************************
2443 * No fields below this line are part of the public API. They
2444 * may not be used outside of libavcodec and can be changed and
2446 * New public fields should be added right above.
2447 *****************************************************************
2451 * Allocate a custom buffer
2453 int (*alloc_frame)(AVCodecContext *avctx, AVFrame *frame);
2456 * Called at the beginning of each frame or field picture.
2458 * Meaningful frame information (codec specific) is guaranteed to
2459 * be parsed at this point. This function is mandatory.
2461 * Note that buf can be NULL along with buf_size set to 0.
2462 * Otherwise, this means the whole frame is available at this point.
2464 * @param avctx the codec context
2465 * @param buf the frame data buffer base
2466 * @param buf_size the size of the frame in bytes
2467 * @return zero if successful, a negative value otherwise
2469 int (*start_frame)(AVCodecContext *avctx, const uint8_t *buf, uint32_t buf_size);
2472 * Callback for parameter data (SPS/PPS/VPS etc).
2474 * Useful for hardware decoders which keep persistent state about the
2475 * video parameters, and need to receive any changes to update that state.
2477 * @param avctx the codec context
2478 * @param type the nal unit type
2479 * @param buf the nal unit data buffer
2480 * @param buf_size the size of the nal unit in bytes
2481 * @return zero if successful, a negative value otherwise
2483 int (*decode_params)(AVCodecContext *avctx, int type, const uint8_t *buf, uint32_t buf_size);
2486 * Callback for each slice.
2488 * Meaningful slice information (codec specific) is guaranteed to
2489 * be parsed at this point. This function is mandatory.
2490 * The only exception is XvMC, that works on MB level.
2492 * @param avctx the codec context
2493 * @param buf the slice data buffer base
2494 * @param buf_size the size of the slice in bytes
2495 * @return zero if successful, a negative value otherwise
2497 int (*decode_slice)(AVCodecContext *avctx, const uint8_t *buf, uint32_t buf_size);
2500 * Called at the end of each frame or field picture.
2502 * The whole picture is parsed at this point and can now be sent
2503 * to the hardware accelerator. This function is mandatory.
2505 * @param avctx the codec context
2506 * @return zero if successful, a negative value otherwise
2508 int (*end_frame)(AVCodecContext *avctx);
2511 * Size of per-frame hardware accelerator private data.
2513 * Private data is allocated with av_mallocz() before
2514 * AVCodecContext.get_buffer() and deallocated after
2515 * AVCodecContext.release_buffer().
2517 int frame_priv_data_size;
2520 * Called for every Macroblock in a slice.
2522 * XvMC uses it to replace the ff_mpv_reconstruct_mb().
2523 * Instead of decoding to raw picture, MB parameters are
2524 * stored in an array provided by the video driver.
2526 * @param s the mpeg context
2528 void (*decode_mb)(struct MpegEncContext *s);
2531 * Initialize the hwaccel private data.
2533 * This will be called from ff_get_format(), after hwaccel and
2534 * hwaccel_context are set and the hwaccel private data in AVCodecInternal
2537 int (*init)(AVCodecContext *avctx);
2540 * Uninitialize the hwaccel private data.
2542 * This will be called from get_format() or avcodec_close(), after hwaccel
2543 * and hwaccel_context are already uninitialized.
2545 int (*uninit)(AVCodecContext *avctx);
2548 * Size of the private data to allocate in
2549 * AVCodecInternal.hwaccel_priv_data.
2554 * Internal hwaccel capabilities.
2559 * Fill the given hw_frames context with current codec parameters. Called
2560 * from get_format. Refer to avcodec_get_hw_frames_parameters() for
2563 * This CAN be called before AVHWAccel.init is called, and you must assume
2564 * that avctx->hwaccel_priv_data is invalid.
2566 int (*frame_params)(AVCodecContext *avctx, AVBufferRef *hw_frames_ctx);
2570 * HWAccel is experimental and is thus avoided in favor of non experimental
2573 #define AV_HWACCEL_CODEC_CAP_EXPERIMENTAL 0x0200
2576 * Hardware acceleration should be used for decoding even if the codec level
2577 * used is unknown or higher than the maximum supported level reported by the
2580 * It's generally a good idea to pass this flag unless you have a specific
2581 * reason not to, as hardware tends to under-report supported levels.
2583 #define AV_HWACCEL_FLAG_IGNORE_LEVEL (1 << 0)
2586 * Hardware acceleration can output YUV pixel formats with a different chroma
2587 * sampling than 4:2:0 and/or other than 8 bits per component.
2589 #define AV_HWACCEL_FLAG_ALLOW_HIGH_DEPTH (1 << 1)
2592 * Hardware acceleration should still be attempted for decoding when the
2593 * codec profile does not match the reported capabilities of the hardware.
2595 * For example, this can be used to try to decode baseline profile H.264
2596 * streams in hardware - it will often succeed, because many streams marked
2597 * as baseline profile actually conform to constrained baseline profile.
2599 * @warning If the stream is actually not supported then the behaviour is
2600 * undefined, and may include returning entirely incorrect output
2601 * while indicating success.
2603 #define AV_HWACCEL_FLAG_ALLOW_PROFILE_MISMATCH (1 << 2)
2609 #if FF_API_AVPICTURE
2611 * @defgroup lavc_picture AVPicture
2613 * Functions for working with AVPicture
2618 * Picture data structure.
2620 * Up to four components can be stored into it, the last component is
2622 * @deprecated use AVFrame or imgutils functions instead
2624 typedef struct AVPicture {
2625 attribute_deprecated
2626 uint8_t *data[AV_NUM_DATA_POINTERS]; ///< pointers to the image data planes
2627 attribute_deprecated
2628 int linesize[AV_NUM_DATA_POINTERS]; ///< number of bytes per line
2636 enum AVSubtitleType {
2639 SUBTITLE_BITMAP, ///< A bitmap, pict will be set
2642 * Plain text, the text field must be set by the decoder and is
2643 * authoritative. ass and pict fields may contain approximations.
2648 * Formatted text, the ass field must be set by the decoder and is
2649 * authoritative. pict and text fields may contain approximations.
2654 #define AV_SUBTITLE_FLAG_FORCED 0x00000001
2656 typedef struct AVSubtitleRect {
2657 int x; ///< top left corner of pict, undefined when pict is not set
2658 int y; ///< top left corner of pict, undefined when pict is not set
2659 int w; ///< width of pict, undefined when pict is not set
2660 int h; ///< height of pict, undefined when pict is not set
2661 int nb_colors; ///< number of colors in pict, undefined when pict is not set
2663 #if FF_API_AVPICTURE
2665 * @deprecated unused
2667 attribute_deprecated
2671 * data+linesize for the bitmap of this subtitle.
2672 * Can be set for text/ass as well once they are rendered.
2677 enum AVSubtitleType type;
2679 char *text; ///< 0 terminated plain UTF-8 text
2682 * 0 terminated ASS/SSA compatible event line.
2683 * The presentation of this is unaffected by the other values in this
2691 typedef struct AVSubtitle {
2692 uint16_t format; /* 0 = graphics */
2693 uint32_t start_display_time; /* relative to packet pts, in ms */
2694 uint32_t end_display_time; /* relative to packet pts, in ms */
2696 AVSubtitleRect **rects;
2697 int64_t pts; ///< Same as packet pts, in AV_TIME_BASE
2702 * If c is NULL, returns the first registered codec,
2703 * if c is non-NULL, returns the next registered codec after c,
2704 * or NULL if c is the last one.
2706 attribute_deprecated
2707 AVCodec *av_codec_next(const AVCodec *c);
2711 * Return the LIBAVCODEC_VERSION_INT constant.
2713 unsigned avcodec_version(void);
2716 * Return the libavcodec build-time configuration.
2718 const char *avcodec_configuration(void);
2721 * Return the libavcodec license.
2723 const char *avcodec_license(void);
2727 * Register the codec codec and initialize libavcodec.
2729 * @warning either this function or avcodec_register_all() must be called
2730 * before any other libavcodec functions.
2732 * @see avcodec_register_all()
2734 attribute_deprecated
2735 void avcodec_register(AVCodec *codec);
2738 * Register all the codecs, parsers and bitstream filters which were enabled at
2739 * configuration time. If you do not call this function you can select exactly
2740 * which formats you want to support, by using the individual registration
2743 * @see avcodec_register
2744 * @see av_register_codec_parser
2745 * @see av_register_bitstream_filter
2747 attribute_deprecated
2748 void avcodec_register_all(void);
2752 * Allocate an AVCodecContext and set its fields to default values. The
2753 * resulting struct should be freed with avcodec_free_context().
2755 * @param codec if non-NULL, allocate private data and initialize defaults
2756 * for the given codec. It is illegal to then call avcodec_open2()
2757 * with a different codec.
2758 * If NULL, then the codec-specific defaults won't be initialized,
2759 * which may result in suboptimal default settings (this is
2760 * important mainly for encoders, e.g. libx264).
2762 * @return An AVCodecContext filled with default values or NULL on failure.
2764 AVCodecContext *avcodec_alloc_context3(const AVCodec *codec);
2767 * Free the codec context and everything associated with it and write NULL to
2768 * the provided pointer.
2770 void avcodec_free_context(AVCodecContext **avctx);
2772 #if FF_API_GET_CONTEXT_DEFAULTS
2774 * @deprecated This function should not be used, as closing and opening a codec
2775 * context multiple time is not supported. A new codec context should be
2776 * allocated for each new use.
2778 int avcodec_get_context_defaults3(AVCodecContext *s, const AVCodec *codec);
2782 * Get the AVClass for AVCodecContext. It can be used in combination with
2783 * AV_OPT_SEARCH_FAKE_OBJ for examining options.
2785 * @see av_opt_find().
2787 const AVClass *avcodec_get_class(void);
2789 #if FF_API_COPY_CONTEXT
2791 * Get the AVClass for AVFrame. It can be used in combination with
2792 * AV_OPT_SEARCH_FAKE_OBJ for examining options.
2794 * @see av_opt_find().
2796 const AVClass *avcodec_get_frame_class(void);
2799 * Get the AVClass for AVSubtitleRect. It can be used in combination with
2800 * AV_OPT_SEARCH_FAKE_OBJ for examining options.
2802 * @see av_opt_find().
2804 const AVClass *avcodec_get_subtitle_rect_class(void);
2807 * Copy the settings of the source AVCodecContext into the destination
2808 * AVCodecContext. The resulting destination codec context will be
2809 * unopened, i.e. you are required to call avcodec_open2() before you
2810 * can use this AVCodecContext to decode/encode video/audio data.
2812 * @param dest target codec context, should be initialized with
2813 * avcodec_alloc_context3(NULL), but otherwise uninitialized
2814 * @param src source codec context
2815 * @return AVERROR() on error (e.g. memory allocation error), 0 on success
2817 * @deprecated The semantics of this function are ill-defined and it should not
2818 * be used. If you need to transfer the stream parameters from one codec context
2819 * to another, use an intermediate AVCodecParameters instance and the
2820 * avcodec_parameters_from_context() / avcodec_parameters_to_context()
2823 attribute_deprecated
2824 int avcodec_copy_context(AVCodecContext *dest, const AVCodecContext *src);
2828 * Fill the parameters struct based on the values from the supplied codec
2829 * context. Any allocated fields in par are freed and replaced with duplicates
2830 * of the corresponding fields in codec.
2832 * @return >= 0 on success, a negative AVERROR code on failure
2834 int avcodec_parameters_from_context(AVCodecParameters *par,
2835 const AVCodecContext *codec);
2838 * Fill the codec context based on the values from the supplied codec
2839 * parameters. Any allocated fields in codec that have a corresponding field in
2840 * par are freed and replaced with duplicates of the corresponding field in par.
2841 * Fields in codec that do not have a counterpart in par are not touched.
2843 * @return >= 0 on success, a negative AVERROR code on failure.
2845 int avcodec_parameters_to_context(AVCodecContext *codec,
2846 const AVCodecParameters *par);
2849 * Initialize the AVCodecContext to use the given AVCodec. Prior to using this
2850 * function the context has to be allocated with avcodec_alloc_context3().
2852 * The functions avcodec_find_decoder_by_name(), avcodec_find_encoder_by_name(),
2853 * avcodec_find_decoder() and avcodec_find_encoder() provide an easy way for
2854 * retrieving a codec.
2856 * @warning This function is not thread safe!
2858 * @note Always call this function before using decoding routines (such as
2859 * @ref avcodec_receive_frame()).
2862 * avcodec_register_all();
2863 * av_dict_set(&opts, "b", "2.5M", 0);
2864 * codec = avcodec_find_decoder(AV_CODEC_ID_H264);
2868 * context = avcodec_alloc_context3(codec);
2870 * if (avcodec_open2(context, codec, opts) < 0)
2874 * @param avctx The context to initialize.
2875 * @param codec The codec to open this context for. If a non-NULL codec has been
2876 * previously passed to avcodec_alloc_context3() or
2877 * for this context, then this parameter MUST be either NULL or
2878 * equal to the previously passed codec.
2879 * @param options A dictionary filled with AVCodecContext and codec-private options.
2880 * On return this object will be filled with options that were not found.
2882 * @return zero on success, a negative value on error
2883 * @see avcodec_alloc_context3(), avcodec_find_decoder(), avcodec_find_encoder(),
2884 * av_dict_set(), av_opt_find().
2886 int avcodec_open2(AVCodecContext *avctx, const AVCodec *codec, AVDictionary **options);
2889 * Close a given AVCodecContext and free all the data associated with it
2890 * (but not the AVCodecContext itself).
2892 * Calling this function on an AVCodecContext that hasn't been opened will free
2893 * the codec-specific data allocated in avcodec_alloc_context3() with a non-NULL
2894 * codec. Subsequent calls will do nothing.
2896 * @note Do not use this function. Use avcodec_free_context() to destroy a
2897 * codec context (either open or closed). Opening and closing a codec context
2898 * multiple times is not supported anymore -- use multiple codec contexts
2901 int avcodec_close(AVCodecContext *avctx);
2904 * Free all allocated data in the given subtitle struct.
2906 * @param sub AVSubtitle to free.
2908 void avsubtitle_free(AVSubtitle *sub);
2915 * @addtogroup lavc_decoding
2920 * The default callback for AVCodecContext.get_buffer2(). It is made public so
2921 * it can be called by custom get_buffer2() implementations for decoders without
2922 * AV_CODEC_CAP_DR1 set.
2924 int avcodec_default_get_buffer2(AVCodecContext *s, AVFrame *frame, int flags);
2927 * Modify width and height values so that they will result in a memory
2928 * buffer that is acceptable for the codec if you do not use any horizontal
2931 * May only be used if a codec with AV_CODEC_CAP_DR1 has been opened.
2933 void avcodec_align_dimensions(AVCodecContext *s, int *width, int *height);
2936 * Modify width and height values so that they will result in a memory
2937 * buffer that is acceptable for the codec if you also ensure that all
2938 * line sizes are a multiple of the respective linesize_align[i].
2940 * May only be used if a codec with AV_CODEC_CAP_DR1 has been opened.
2942 void avcodec_align_dimensions2(AVCodecContext *s, int *width, int *height,
2943 int linesize_align[AV_NUM_DATA_POINTERS]);
2946 * Converts AVChromaLocation to swscale x/y chroma position.
2948 * The positions represent the chroma (0,0) position in a coordinates system
2949 * with luma (0,0) representing the origin and luma(1,1) representing 256,256
2951 * @param xpos horizontal chroma sample position
2952 * @param ypos vertical chroma sample position
2954 int avcodec_enum_to_chroma_pos(int *xpos, int *ypos, enum AVChromaLocation pos);
2957 * Converts swscale x/y chroma position to AVChromaLocation.
2959 * The positions represent the chroma (0,0) position in a coordinates system
2960 * with luma (0,0) representing the origin and luma(1,1) representing 256,256
2962 * @param xpos horizontal chroma sample position
2963 * @param ypos vertical chroma sample position
2965 enum AVChromaLocation avcodec_chroma_pos_to_enum(int xpos, int ypos);
2968 * Decode the audio frame of size avpkt->size from avpkt->data into frame.
2970 * Some decoders may support multiple frames in a single AVPacket. Such
2971 * decoders would then just decode the first frame and the return value would be
2972 * less than the packet size. In this case, avcodec_decode_audio4 has to be
2973 * called again with an AVPacket containing the remaining data in order to
2974 * decode the second frame, etc... Even if no frames are returned, the packet
2975 * needs to be fed to the decoder with remaining data until it is completely
2976 * consumed or an error occurs.
2978 * Some decoders (those marked with AV_CODEC_CAP_DELAY) have a delay between input
2979 * and output. This means that for some packets they will not immediately
2980 * produce decoded output and need to be flushed at the end of decoding to get
2981 * all the decoded data. Flushing is done by calling this function with packets
2982 * with avpkt->data set to NULL and avpkt->size set to 0 until it stops
2983 * returning samples. It is safe to flush even those decoders that are not
2984 * marked with AV_CODEC_CAP_DELAY, then no samples will be returned.
2986 * @warning The input buffer, avpkt->data must be AV_INPUT_BUFFER_PADDING_SIZE
2987 * larger than the actual read bytes because some optimized bitstream
2988 * readers read 32 or 64 bits at once and could read over the end.
2990 * @note The AVCodecContext MUST have been opened with @ref avcodec_open2()
2991 * before packets may be fed to the decoder.
2993 * @param avctx the codec context
2994 * @param[out] frame The AVFrame in which to store decoded audio samples.
2995 * The decoder will allocate a buffer for the decoded frame by
2996 * calling the AVCodecContext.get_buffer2() callback.
2997 * When AVCodecContext.refcounted_frames is set to 1, the frame is
2998 * reference counted and the returned reference belongs to the
2999 * caller. The caller must release the frame using av_frame_unref()
3000 * when the frame is no longer needed. The caller may safely write
3001 * to the frame if av_frame_is_writable() returns 1.
3002 * When AVCodecContext.refcounted_frames is set to 0, the returned
3003 * reference belongs to the decoder and is valid only until the
3004 * next call to this function or until closing or flushing the
3005 * decoder. The caller may not write to it.
3006 * @param[out] got_frame_ptr Zero if no frame could be decoded, otherwise it is
3007 * non-zero. Note that this field being set to zero
3008 * does not mean that an error has occurred. For
3009 * decoders with AV_CODEC_CAP_DELAY set, no given decode
3010 * call is guaranteed to produce a frame.
3011 * @param[in] avpkt The input AVPacket containing the input buffer.
3012 * At least avpkt->data and avpkt->size should be set. Some
3013 * decoders might also require additional fields to be set.
3014 * @return A negative error code is returned if an error occurred during
3015 * decoding, otherwise the number of bytes consumed from the input
3016 * AVPacket is returned.
3018 * @deprecated Use avcodec_send_packet() and avcodec_receive_frame().
3020 attribute_deprecated
3021 int avcodec_decode_audio4(AVCodecContext *avctx, AVFrame *frame,
3022 int *got_frame_ptr, const AVPacket *avpkt);
3025 * Decode the video frame of size avpkt->size from avpkt->data into picture.
3026 * Some decoders may support multiple frames in a single AVPacket, such
3027 * decoders would then just decode the first frame.
3029 * @warning The input buffer must be AV_INPUT_BUFFER_PADDING_SIZE larger than
3030 * the actual read bytes because some optimized bitstream readers read 32 or 64
3031 * bits at once and could read over the end.
3033 * @warning The end of the input buffer buf should be set to 0 to ensure that
3034 * no overreading happens for damaged MPEG streams.
3036 * @note Codecs which have the AV_CODEC_CAP_DELAY capability set have a delay
3037 * between input and output, these need to be fed with avpkt->data=NULL,
3038 * avpkt->size=0 at the end to return the remaining frames.
3040 * @note The AVCodecContext MUST have been opened with @ref avcodec_open2()
3041 * before packets may be fed to the decoder.
3043 * @param avctx the codec context
3044 * @param[out] picture The AVFrame in which the decoded video frame will be stored.
3045 * Use av_frame_alloc() to get an AVFrame. The codec will
3046 * allocate memory for the actual bitmap by calling the
3047 * AVCodecContext.get_buffer2() callback.
3048 * When AVCodecContext.refcounted_frames is set to 1, the frame is
3049 * reference counted and the returned reference belongs to the
3050 * caller. The caller must release the frame using av_frame_unref()
3051 * when the frame is no longer needed. The caller may safely write
3052 * to the frame if av_frame_is_writable() returns 1.
3053 * When AVCodecContext.refcounted_frames is set to 0, the returned
3054 * reference belongs to the decoder and is valid only until the
3055 * next call to this function or until closing or flushing the
3056 * decoder. The caller may not write to it.
3058 * @param[in] avpkt The input AVPacket containing the input buffer.
3059 * You can create such packet with av_init_packet() and by then setting
3060 * data and size, some decoders might in addition need other fields like
3061 * flags&AV_PKT_FLAG_KEY. All decoders are designed to use the least
3063 * @param[in,out] got_picture_ptr Zero if no frame could be decompressed, otherwise, it is nonzero.
3064 * @return On error a negative value is returned, otherwise the number of bytes
3065 * used or zero if no frame could be decompressed.
3067 * @deprecated Use avcodec_send_packet() and avcodec_receive_frame().
3069 attribute_deprecated
3070 int avcodec_decode_video2(AVCodecContext *avctx, AVFrame *picture,
3071 int *got_picture_ptr,
3072 const AVPacket *avpkt);
3075 * Decode a subtitle message.
3076 * Return a negative value on error, otherwise return the number of bytes used.
3077 * If no subtitle could be decompressed, got_sub_ptr is zero.
3078 * Otherwise, the subtitle is stored in *sub.
3079 * Note that AV_CODEC_CAP_DR1 is not available for subtitle codecs. This is for
3080 * simplicity, because the performance difference is expected to be negligible
3081 * and reusing a get_buffer written for video codecs would probably perform badly
3082 * due to a potentially very different allocation pattern.
3084 * Some decoders (those marked with AV_CODEC_CAP_DELAY) have a delay between input
3085 * and output. This means that for some packets they will not immediately
3086 * produce decoded output and need to be flushed at the end of decoding to get
3087 * all the decoded data. Flushing is done by calling this function with packets
3088 * with avpkt->data set to NULL and avpkt->size set to 0 until it stops
3089 * returning subtitles. It is safe to flush even those decoders that are not
3090 * marked with AV_CODEC_CAP_DELAY, then no subtitles will be returned.
3092 * @note The AVCodecContext MUST have been opened with @ref avcodec_open2()
3093 * before packets may be fed to the decoder.
3095 * @param avctx the codec context
3096 * @param[out] sub The preallocated AVSubtitle in which the decoded subtitle will be stored,
3097 * must be freed with avsubtitle_free if *got_sub_ptr is set.
3098 * @param[in,out] got_sub_ptr Zero if no subtitle could be decompressed, otherwise, it is nonzero.
3099 * @param[in] avpkt The input AVPacket containing the input buffer.
3101 int avcodec_decode_subtitle2(AVCodecContext *avctx, AVSubtitle *sub,
3106 * Supply raw packet data as input to a decoder.
3108 * Internally, this call will copy relevant AVCodecContext fields, which can
3109 * influence decoding per-packet, and apply them when the packet is actually
3110 * decoded. (For example AVCodecContext.skip_frame, which might direct the
3111 * decoder to drop the frame contained by the packet sent with this function.)
3113 * @warning The input buffer, avpkt->data must be AV_INPUT_BUFFER_PADDING_SIZE
3114 * larger than the actual read bytes because some optimized bitstream
3115 * readers read 32 or 64 bits at once and could read over the end.
3117 * @warning Do not mix this API with the legacy API (like avcodec_decode_video2())
3118 * on the same AVCodecContext. It will return unexpected results now
3119 * or in future libavcodec versions.
3121 * @note The AVCodecContext MUST have been opened with @ref avcodec_open2()
3122 * before packets may be fed to the decoder.
3124 * @param avctx codec context
3125 * @param[in] avpkt The input AVPacket. Usually, this will be a single video
3126 * frame, or several complete audio frames.
3127 * Ownership of the packet remains with the caller, and the
3128 * decoder will not write to the packet. The decoder may create
3129 * a reference to the packet data (or copy it if the packet is
3130 * not reference-counted).
3131 * Unlike with older APIs, the packet is always fully consumed,
3132 * and if it contains multiple frames (e.g. some audio codecs),
3133 * will require you to call avcodec_receive_frame() multiple
3134 * times afterwards before you can send a new packet.
3135 * It can be NULL (or an AVPacket with data set to NULL and
3136 * size set to 0); in this case, it is considered a flush
3137 * packet, which signals the end of the stream. Sending the
3138 * first flush packet will return success. Subsequent ones are
3139 * unnecessary and will return AVERROR_EOF. If the decoder
3140 * still has frames buffered, it will return them after sending
3143 * @return 0 on success, otherwise negative error code:
3144 * AVERROR(EAGAIN): input is not accepted in the current state - user
3145 * must read output with avcodec_receive_frame() (once
3146 * all output is read, the packet should be resent, and
3147 * the call will not fail with EAGAIN).
3148 * AVERROR_EOF: the decoder has been flushed, and no new packets can
3149 * be sent to it (also returned if more than 1 flush
3151 * AVERROR(EINVAL): codec not opened, it is an encoder, or requires flush
3152 * AVERROR(ENOMEM): failed to add packet to internal queue, or similar
3153 * other errors: legitimate decoding errors
3155 int avcodec_send_packet(AVCodecContext *avctx, const AVPacket *avpkt);
3158 * Return decoded output data from a decoder.
3160 * @param avctx codec context
3161 * @param frame This will be set to a reference-counted video or audio
3162 * frame (depending on the decoder type) allocated by the
3163 * decoder. Note that the function will always call
3164 * av_frame_unref(frame) before doing anything else.
3167 * 0: success, a frame was returned
3168 * AVERROR(EAGAIN): output is not available in this state - user must try
3170 * AVERROR_EOF: the decoder has been fully flushed, and there will be
3171 * no more output frames
3172 * AVERROR(EINVAL): codec not opened, or it is an encoder
3173 * AVERROR_INPUT_CHANGED: current decoded frame has changed parameters
3174 * with respect to first decoded frame. Applicable
3175 * when flag AV_CODEC_FLAG_DROPCHANGED is set.
3176 * other negative values: legitimate decoding errors
3178 int avcodec_receive_frame(AVCodecContext *avctx, AVFrame *frame);
3181 * Supply a raw video or audio frame to the encoder. Use avcodec_receive_packet()
3182 * to retrieve buffered output packets.
3184 * @param avctx codec context
3185 * @param[in] frame AVFrame containing the raw audio or video frame to be encoded.
3186 * Ownership of the frame remains with the caller, and the
3187 * encoder will not write to the frame. The encoder may create
3188 * a reference to the frame data (or copy it if the frame is
3189 * not reference-counted).
3190 * It can be NULL, in which case it is considered a flush
3191 * packet. This signals the end of the stream. If the encoder
3192 * still has packets buffered, it will return them after this
3193 * call. Once flushing mode has been entered, additional flush
3194 * packets are ignored, and sending frames will return
3198 * If AV_CODEC_CAP_VARIABLE_FRAME_SIZE is set, then each frame
3199 * can have any number of samples.
3200 * If it is not set, frame->nb_samples must be equal to
3201 * avctx->frame_size for all frames except the last.
3202 * The final frame may be smaller than avctx->frame_size.
3203 * @return 0 on success, otherwise negative error code:
3204 * AVERROR(EAGAIN): input is not accepted in the current state - user
3205 * must read output with avcodec_receive_packet() (once
3206 * all output is read, the packet should be resent, and
3207 * the call will not fail with EAGAIN).
3208 * AVERROR_EOF: the encoder has been flushed, and no new frames can
3210 * AVERROR(EINVAL): codec not opened, refcounted_frames not set, it is a
3211 * decoder, or requires flush
3212 * AVERROR(ENOMEM): failed to add packet to internal queue, or similar
3213 * other errors: legitimate encoding errors
3215 int avcodec_send_frame(AVCodecContext *avctx, const AVFrame *frame);
3218 * Read encoded data from the encoder.
3220 * @param avctx codec context
3221 * @param avpkt This will be set to a reference-counted packet allocated by the
3222 * encoder. Note that the function will always call
3223 * av_packet_unref(avpkt) before doing anything else.
3224 * @return 0 on success, otherwise negative error code:
3225 * AVERROR(EAGAIN): output is not available in the current state - user
3226 * must try to send input
3227 * AVERROR_EOF: the encoder has been fully flushed, and there will be
3228 * no more output packets
3229 * AVERROR(EINVAL): codec not opened, or it is a decoder
3230 * other errors: legitimate encoding errors
3232 int avcodec_receive_packet(AVCodecContext *avctx, AVPacket *avpkt);
3235 * Create and return a AVHWFramesContext with values adequate for hardware
3236 * decoding. This is meant to get called from the get_format callback, and is
3237 * a helper for preparing a AVHWFramesContext for AVCodecContext.hw_frames_ctx.
3238 * This API is for decoding with certain hardware acceleration modes/APIs only.
3240 * The returned AVHWFramesContext is not initialized. The caller must do this
3241 * with av_hwframe_ctx_init().
3243 * Calling this function is not a requirement, but makes it simpler to avoid
3244 * codec or hardware API specific details when manually allocating frames.
3246 * Alternatively to this, an API user can set AVCodecContext.hw_device_ctx,
3247 * which sets up AVCodecContext.hw_frames_ctx fully automatically, and makes
3248 * it unnecessary to call this function or having to care about
3249 * AVHWFramesContext initialization at all.
3251 * There are a number of requirements for calling this function:
3253 * - It must be called from get_format with the same avctx parameter that was
3254 * passed to get_format. Calling it outside of get_format is not allowed, and
3255 * can trigger undefined behavior.
3256 * - The function is not always supported (see description of return values).
3257 * Even if this function returns successfully, hwaccel initialization could
3258 * fail later. (The degree to which implementations check whether the stream
3259 * is actually supported varies. Some do this check only after the user's
3260 * get_format callback returns.)
3261 * - The hw_pix_fmt must be one of the choices suggested by get_format. If the
3262 * user decides to use a AVHWFramesContext prepared with this API function,
3263 * the user must return the same hw_pix_fmt from get_format.
3264 * - The device_ref passed to this function must support the given hw_pix_fmt.
3265 * - After calling this API function, it is the user's responsibility to
3266 * initialize the AVHWFramesContext (returned by the out_frames_ref parameter),
3267 * and to set AVCodecContext.hw_frames_ctx to it. If done, this must be done
3268 * before returning from get_format (this is implied by the normal
3269 * AVCodecContext.hw_frames_ctx API rules).
3270 * - The AVHWFramesContext parameters may change every time time get_format is
3271 * called. Also, AVCodecContext.hw_frames_ctx is reset before get_format. So
3272 * you are inherently required to go through this process again on every
3274 * - It is perfectly possible to call this function without actually using
3275 * the resulting AVHWFramesContext. One use-case might be trying to reuse a
3276 * previously initialized AVHWFramesContext, and calling this API function
3277 * only to test whether the required frame parameters have changed.
3278 * - Fields that use dynamically allocated values of any kind must not be set
3279 * by the user unless setting them is explicitly allowed by the documentation.
3280 * If the user sets AVHWFramesContext.free and AVHWFramesContext.user_opaque,
3281 * the new free callback must call the potentially set previous free callback.
3282 * This API call may set any dynamically allocated fields, including the free
3285 * The function will set at least the following fields on AVHWFramesContext
3286 * (potentially more, depending on hwaccel API):
3288 * - All fields set by av_hwframe_ctx_alloc().
3289 * - Set the format field to hw_pix_fmt.
3290 * - Set the sw_format field to the most suited and most versatile format. (An
3291 * implication is that this will prefer generic formats over opaque formats
3292 * with arbitrary restrictions, if possible.)
3293 * - Set the width/height fields to the coded frame size, rounded up to the
3294 * API-specific minimum alignment.
3295 * - Only _if_ the hwaccel requires a pre-allocated pool: set the initial_pool_size
3296 * field to the number of maximum reference surfaces possible with the codec,
3297 * plus 1 surface for the user to work (meaning the user can safely reference
3298 * at most 1 decoded surface at a time), plus additional buffering introduced
3299 * by frame threading. If the hwaccel does not require pre-allocation, the
3300 * field is left to 0, and the decoder will allocate new surfaces on demand
3302 * - Possibly AVHWFramesContext.hwctx fields, depending on the underlying
3305 * Essentially, out_frames_ref returns the same as av_hwframe_ctx_alloc(), but
3306 * with basic frame parameters set.
3308 * The function is stateless, and does not change the AVCodecContext or the
3309 * device_ref AVHWDeviceContext.
3311 * @param avctx The context which is currently calling get_format, and which
3312 * implicitly contains all state needed for filling the returned
3313 * AVHWFramesContext properly.
3314 * @param device_ref A reference to the AVHWDeviceContext describing the device
3315 * which will be used by the hardware decoder.
3316 * @param hw_pix_fmt The hwaccel format you are going to return from get_format.
3317 * @param out_frames_ref On success, set to a reference to an _uninitialized_
3318 * AVHWFramesContext, created from the given device_ref.
3319 * Fields will be set to values required for decoding.
3320 * Not changed if an error is returned.
3321 * @return zero on success, a negative value on error. The following error codes
3322 * have special semantics:
3323 * AVERROR(ENOENT): the decoder does not support this functionality. Setup
3324 * is always manual, or it is a decoder which does not
3325 * support setting AVCodecContext.hw_frames_ctx at all,
3326 * or it is a software format.
3327 * AVERROR(EINVAL): it is known that hardware decoding is not supported for
3328 * this configuration, or the device_ref is not supported
3329 * for the hwaccel referenced by hw_pix_fmt.
3331 int avcodec_get_hw_frames_parameters(AVCodecContext *avctx,
3332 AVBufferRef *device_ref,
3333 enum AVPixelFormat hw_pix_fmt,
3334 AVBufferRef **out_frames_ref);
3339 * @defgroup lavc_parsing Frame parsing
3343 enum AVPictureStructure {
3344 AV_PICTURE_STRUCTURE_UNKNOWN, //< unknown
3345 AV_PICTURE_STRUCTURE_TOP_FIELD, //< coded as top field
3346 AV_PICTURE_STRUCTURE_BOTTOM_FIELD, //< coded as bottom field
3347 AV_PICTURE_STRUCTURE_FRAME, //< coded as frame
3350 typedef struct AVCodecParserContext {
3352 struct AVCodecParser *parser;
3353 int64_t frame_offset; /* offset of the current frame */
3354 int64_t cur_offset; /* current offset
3355 (incremented by each av_parser_parse()) */
3356 int64_t next_frame_offset; /* offset of the next frame */
3358 int pict_type; /* XXX: Put it back in AVCodecContext. */
3360 * This field is used for proper frame duration computation in lavf.
3361 * It signals, how much longer the frame duration of the current frame
3362 * is compared to normal frame duration.
3364 * frame_duration = (1 + repeat_pict) * time_base
3366 * It is used by codecs like H.264 to display telecined material.
3368 int repeat_pict; /* XXX: Put it back in AVCodecContext. */
3369 int64_t pts; /* pts of the current frame */
3370 int64_t dts; /* dts of the current frame */
3375 int fetch_timestamp;
3377 #define AV_PARSER_PTS_NB 4
3378 int cur_frame_start_index;
3379 int64_t cur_frame_offset[AV_PARSER_PTS_NB];
3380 int64_t cur_frame_pts[AV_PARSER_PTS_NB];
3381 int64_t cur_frame_dts[AV_PARSER_PTS_NB];
3384 #define PARSER_FLAG_COMPLETE_FRAMES 0x0001
3385 #define PARSER_FLAG_ONCE 0x0002
3386 /// Set if the parser has a valid file offset
3387 #define PARSER_FLAG_FETCHED_OFFSET 0x0004
3388 #define PARSER_FLAG_USE_CODEC_TS 0x1000
3390 int64_t offset; ///< byte offset from starting packet start
3391 int64_t cur_frame_end[AV_PARSER_PTS_NB];
3394 * Set by parser to 1 for key frames and 0 for non-key frames.
3395 * It is initialized to -1, so if the parser doesn't set this flag,
3396 * old-style fallback using AV_PICTURE_TYPE_I picture type as key frames
3401 #if FF_API_CONVERGENCE_DURATION
3403 * @deprecated unused
3405 attribute_deprecated
3406 int64_t convergence_duration;
3409 // Timestamp generation support:
3411 * Synchronization point for start of timestamp generation.
3413 * Set to >0 for sync point, 0 for no sync point and <0 for undefined
3416 * For example, this corresponds to presence of H.264 buffering period
3422 * Offset of the current timestamp against last timestamp sync point in
3423 * units of AVCodecContext.time_base.
3425 * Set to INT_MIN when dts_sync_point unused. Otherwise, it must
3426 * contain a valid timestamp offset.
3428 * Note that the timestamp of sync point has usually a nonzero
3429 * dts_ref_dts_delta, which refers to the previous sync point. Offset of
3430 * the next frame after timestamp sync point will be usually 1.
3432 * For example, this corresponds to H.264 cpb_removal_delay.
3434 int dts_ref_dts_delta;
3437 * Presentation delay of current frame in units of AVCodecContext.time_base.
3439 * Set to INT_MIN when dts_sync_point unused. Otherwise, it must
3440 * contain valid non-negative timestamp delta (presentation time of a frame
3441 * must not lie in the past).
3443 * This delay represents the difference between decoding and presentation
3444 * time of the frame.
3446 * For example, this corresponds to H.264 dpb_output_delay.
3451 * Position of the packet in file.
3453 * Analogous to cur_frame_pts/dts
3455 int64_t cur_frame_pos[AV_PARSER_PTS_NB];
3458 * Byte position of currently parsed frame in stream.
3463 * Previous frame byte position.
3468 * Duration of the current frame.
3469 * For audio, this is in units of 1 / AVCodecContext.sample_rate.
3470 * For all other types, this is in units of AVCodecContext.time_base.
3474 enum AVFieldOrder field_order;
3477 * Indicate whether a picture is coded as a frame, top field or bottom field.
3479 * For example, H.264 field_pic_flag equal to 0 corresponds to
3480 * AV_PICTURE_STRUCTURE_FRAME. An H.264 picture with field_pic_flag
3481 * equal to 1 and bottom_field_flag equal to 0 corresponds to
3482 * AV_PICTURE_STRUCTURE_TOP_FIELD.
3484 enum AVPictureStructure picture_structure;
3487 * Picture number incremented in presentation or output order.
3488 * This field may be reinitialized at the first picture of a new sequence.
3490 * For example, this corresponds to H.264 PicOrderCnt.
3492 int output_picture_number;
3495 * Dimensions of the decoded video intended for presentation.
3501 * Dimensions of the coded video.
3507 * The format of the coded data, corresponds to enum AVPixelFormat for video
3508 * and for enum AVSampleFormat for audio.
3510 * Note that a decoder can have considerable freedom in how exactly it
3511 * decodes the data, so the format reported here might be different from the
3512 * one returned by a decoder.
3515 } AVCodecParserContext;
3517 typedef struct AVCodecParser {
3518 int codec_ids[5]; /* several codec IDs are permitted */
3520 int (*parser_init)(AVCodecParserContext *s);
3521 /* This callback never returns an error, a negative value means that
3522 * the frame start was in a previous packet. */
3523 int (*parser_parse)(AVCodecParserContext *s,
3524 AVCodecContext *avctx,
3525 const uint8_t **poutbuf, int *poutbuf_size,
3526 const uint8_t *buf, int buf_size);
3527 void (*parser_close)(AVCodecParserContext *s);
3528 int (*split)(AVCodecContext *avctx, const uint8_t *buf, int buf_size);
3529 struct AVCodecParser *next;
3533 * Iterate over all registered codec parsers.
3535 * @param opaque a pointer where libavcodec will store the iteration state. Must
3536 * point to NULL to start the iteration.
3538 * @return the next registered codec parser or NULL when the iteration is
3541 const AVCodecParser *av_parser_iterate(void **opaque);
3543 attribute_deprecated
3544 AVCodecParser *av_parser_next(const AVCodecParser *c);
3546 attribute_deprecated
3547 void av_register_codec_parser(AVCodecParser *parser);
3548 AVCodecParserContext *av_parser_init(int codec_id);
3553 * @param s parser context.
3554 * @param avctx codec context.
3555 * @param poutbuf set to pointer to parsed buffer or NULL if not yet finished.
3556 * @param poutbuf_size set to size of parsed buffer or zero if not yet finished.
3557 * @param buf input buffer.
3558 * @param buf_size buffer size in bytes without the padding. I.e. the full buffer
3559 size is assumed to be buf_size + AV_INPUT_BUFFER_PADDING_SIZE.
3560 To signal EOF, this should be 0 (so that the last frame
3562 * @param pts input presentation timestamp.
3563 * @param dts input decoding timestamp.
3564 * @param pos input byte position in stream.
3565 * @return the number of bytes of the input bitstream used.
3570 * len = av_parser_parse2(myparser, AVCodecContext, &data, &size,
3577 * decode_frame(data, size);
3581 int av_parser_parse2(AVCodecParserContext *s,
3582 AVCodecContext *avctx,
3583 uint8_t **poutbuf, int *poutbuf_size,
3584 const uint8_t *buf, int buf_size,
3585 int64_t pts, int64_t dts,
3589 * @return 0 if the output buffer is a subset of the input, 1 if it is allocated and must be freed
3590 * @deprecated use AVBitStreamFilter
3592 int av_parser_change(AVCodecParserContext *s,
3593 AVCodecContext *avctx,
3594 uint8_t **poutbuf, int *poutbuf_size,
3595 const uint8_t *buf, int buf_size, int keyframe);
3596 void av_parser_close(AVCodecParserContext *s);
3604 * @addtogroup lavc_encoding
3609 * Encode a frame of audio.
3611 * Takes input samples from frame and writes the next output packet, if
3612 * available, to avpkt. The output packet does not necessarily contain data for
3613 * the most recent frame, as encoders can delay, split, and combine input frames
3614 * internally as needed.
3616 * @param avctx codec context
3617 * @param avpkt output AVPacket.
3618 * The user can supply an output buffer by setting
3619 * avpkt->data and avpkt->size prior to calling the
3620 * function, but if the size of the user-provided data is not
3621 * large enough, encoding will fail. If avpkt->data and
3622 * avpkt->size are set, avpkt->destruct must also be set. All
3623 * other AVPacket fields will be reset by the encoder using
3624 * av_init_packet(). If avpkt->data is NULL, the encoder will
3625 * allocate it. The encoder will set avpkt->size to the size
3626 * of the output packet.
3628 * If this function fails or produces no output, avpkt will be
3629 * freed using av_packet_unref().
3630 * @param[in] frame AVFrame containing the raw audio data to be encoded.
3631 * May be NULL when flushing an encoder that has the
3632 * AV_CODEC_CAP_DELAY capability set.
3633 * If AV_CODEC_CAP_VARIABLE_FRAME_SIZE is set, then each frame
3634 * can have any number of samples.
3635 * If it is not set, frame->nb_samples must be equal to
3636 * avctx->frame_size for all frames except the last.
3637 * The final frame may be smaller than avctx->frame_size.
3638 * @param[out] got_packet_ptr This field is set to 1 by libavcodec if the
3639 * output packet is non-empty, and to 0 if it is
3640 * empty. If the function returns an error, the
3641 * packet can be assumed to be invalid, and the
3642 * value of got_packet_ptr is undefined and should
3644 * @return 0 on success, negative error code on failure
3646 * @deprecated use avcodec_send_frame()/avcodec_receive_packet() instead
3648 attribute_deprecated
3649 int avcodec_encode_audio2(AVCodecContext *avctx, AVPacket *avpkt,
3650 const AVFrame *frame, int *got_packet_ptr);
3653 * Encode a frame of video.
3655 * Takes input raw video data from frame and writes the next output packet, if
3656 * available, to avpkt. The output packet does not necessarily contain data for
3657 * the most recent frame, as encoders can delay and reorder input frames
3658 * internally as needed.
3660 * @param avctx codec context
3661 * @param avpkt output AVPacket.
3662 * The user can supply an output buffer by setting
3663 * avpkt->data and avpkt->size prior to calling the
3664 * function, but if the size of the user-provided data is not
3665 * large enough, encoding will fail. All other AVPacket fields
3666 * will be reset by the encoder using av_init_packet(). If
3667 * avpkt->data is NULL, the encoder will allocate it.
3668 * The encoder will set avpkt->size to the size of the
3669 * output packet. The returned data (if any) belongs to the
3670 * caller, he is responsible for freeing it.
3672 * If this function fails or produces no output, avpkt will be
3673 * freed using av_packet_unref().
3674 * @param[in] frame AVFrame containing the raw video data to be encoded.
3675 * May be NULL when flushing an encoder that has the
3676 * AV_CODEC_CAP_DELAY capability set.
3677 * @param[out] got_packet_ptr This field is set to 1 by libavcodec if the
3678 * output packet is non-empty, and to 0 if it is
3679 * empty. If the function returns an error, the
3680 * packet can be assumed to be invalid, and the
3681 * value of got_packet_ptr is undefined and should
3683 * @return 0 on success, negative error code on failure
3685 * @deprecated use avcodec_send_frame()/avcodec_receive_packet() instead
3687 attribute_deprecated
3688 int avcodec_encode_video2(AVCodecContext *avctx, AVPacket *avpkt,
3689 const AVFrame *frame, int *got_packet_ptr);
3691 int avcodec_encode_subtitle(AVCodecContext *avctx, uint8_t *buf, int buf_size,
3692 const AVSubtitle *sub);
3699 #if FF_API_AVPICTURE
3701 * @addtogroup lavc_picture
3706 * @deprecated unused
3708 attribute_deprecated
3709 int avpicture_alloc(AVPicture *picture, enum AVPixelFormat pix_fmt, int width, int height);
3712 * @deprecated unused
3714 attribute_deprecated
3715 void avpicture_free(AVPicture *picture);
3718 * @deprecated use av_image_fill_arrays() instead.
3720 attribute_deprecated
3721 int avpicture_fill(AVPicture *picture, const uint8_t *ptr,
3722 enum AVPixelFormat pix_fmt, int width, int height);
3725 * @deprecated use av_image_copy_to_buffer() instead.
3727 attribute_deprecated
3728 int avpicture_layout(const AVPicture *src, enum AVPixelFormat pix_fmt,
3729 int width, int height,
3730 unsigned char *dest, int dest_size);
3733 * @deprecated use av_image_get_buffer_size() instead.
3735 attribute_deprecated
3736 int avpicture_get_size(enum AVPixelFormat pix_fmt, int width, int height);
3739 * @deprecated av_image_copy() instead.
3741 attribute_deprecated
3742 void av_picture_copy(AVPicture *dst, const AVPicture *src,
3743 enum AVPixelFormat pix_fmt, int width, int height);
3746 * @deprecated unused
3748 attribute_deprecated
3749 int av_picture_crop(AVPicture *dst, const AVPicture *src,
3750 enum AVPixelFormat pix_fmt, int top_band, int left_band);
3753 * @deprecated unused
3755 attribute_deprecated
3756 int av_picture_pad(AVPicture *dst, const AVPicture *src, int height, int width, enum AVPixelFormat pix_fmt,
3757 int padtop, int padbottom, int padleft, int padright, int *color);
3765 * @defgroup lavc_misc Utility functions
3768 * Miscellaneous utility functions related to both encoding and decoding
3774 * @defgroup lavc_misc_pixfmt Pixel formats
3776 * Functions for working with pixel formats.
3780 #if FF_API_GETCHROMA
3782 * @deprecated Use av_pix_fmt_get_chroma_sub_sample
3785 attribute_deprecated
3786 void avcodec_get_chroma_sub_sample(enum AVPixelFormat pix_fmt, int *h_shift, int *v_shift);
3790 * Return a value representing the fourCC code associated to the
3791 * pixel format pix_fmt, or 0 if no associated fourCC code can be
3794 unsigned int avcodec_pix_fmt_to_codec_tag(enum AVPixelFormat pix_fmt);
3797 * @deprecated see av_get_pix_fmt_loss()
3799 int avcodec_get_pix_fmt_loss(enum AVPixelFormat dst_pix_fmt, enum AVPixelFormat src_pix_fmt,
3803 * Find the best pixel format to convert to given a certain source pixel
3804 * format. When converting from one pixel format to another, information loss
3805 * may occur. For example, when converting from RGB24 to GRAY, the color
3806 * information will be lost. Similarly, other losses occur when converting from
3807 * some formats to other formats. avcodec_find_best_pix_fmt_of_2() searches which of
3808 * the given pixel formats should be used to suffer the least amount of loss.
3809 * The pixel formats from which it chooses one, are determined by the
3810 * pix_fmt_list parameter.
3813 * @param[in] pix_fmt_list AV_PIX_FMT_NONE terminated array of pixel formats to choose from
3814 * @param[in] src_pix_fmt source pixel format
3815 * @param[in] has_alpha Whether the source pixel format alpha channel is used.
3816 * @param[out] loss_ptr Combination of flags informing you what kind of losses will occur.
3817 * @return The best pixel format to convert to or -1 if none was found.
3819 enum AVPixelFormat avcodec_find_best_pix_fmt_of_list(const enum AVPixelFormat *pix_fmt_list,
3820 enum AVPixelFormat src_pix_fmt,
3821 int has_alpha, int *loss_ptr);
3824 * @deprecated see av_find_best_pix_fmt_of_2()
3826 enum AVPixelFormat avcodec_find_best_pix_fmt_of_2(enum AVPixelFormat dst_pix_fmt1, enum AVPixelFormat dst_pix_fmt2,
3827 enum AVPixelFormat src_pix_fmt, int has_alpha, int *loss_ptr);
3829 attribute_deprecated
3830 enum AVPixelFormat avcodec_find_best_pix_fmt2(enum AVPixelFormat dst_pix_fmt1, enum AVPixelFormat dst_pix_fmt2,
3831 enum AVPixelFormat src_pix_fmt, int has_alpha, int *loss_ptr);
3833 enum AVPixelFormat avcodec_default_get_format(struct AVCodecContext *s, const enum AVPixelFormat * fmt);
3839 #if FF_API_TAG_STRING
3841 * Put a string representing the codec tag codec_tag in buf.
3843 * @param buf buffer to place codec tag in
3844 * @param buf_size size in bytes of buf
3845 * @param codec_tag codec tag to assign
3846 * @return the length of the string that would have been generated if
3847 * enough space had been available, excluding the trailing null
3849 * @deprecated see av_fourcc_make_string() and av_fourcc2str().
3851 attribute_deprecated
3852 size_t av_get_codec_tag_string(char *buf, size_t buf_size, unsigned int codec_tag);
3855 void avcodec_string(char *buf, int buf_size, AVCodecContext *enc, int encode);
3858 * Return a name for the specified profile, if available.
3860 * @param codec the codec that is searched for the given profile
3861 * @param profile the profile value for which a name is requested
3862 * @return A name for the profile if found, NULL otherwise.
3864 const char *av_get_profile_name(const AVCodec *codec, int profile);
3867 * Return a name for the specified profile, if available.
3869 * @param codec_id the ID of the codec to which the requested profile belongs
3870 * @param profile the profile value for which a name is requested
3871 * @return A name for the profile if found, NULL otherwise.
3873 * @note unlike av_get_profile_name(), which searches a list of profiles
3874 * supported by a specific decoder or encoder implementation, this
3875 * function searches the list of profiles from the AVCodecDescriptor
3877 const char *avcodec_profile_name(enum AVCodecID codec_id, int profile);
3879 int avcodec_default_execute(AVCodecContext *c, int (*func)(AVCodecContext *c2, void *arg2),void *arg, int *ret, int count, int size);
3880 int avcodec_default_execute2(AVCodecContext *c, int (*func)(AVCodecContext *c2, void *arg2, int, int),void *arg, int *ret, int count);
3881 //FIXME func typedef
3884 * Fill AVFrame audio data and linesize pointers.
3886 * The buffer buf must be a preallocated buffer with a size big enough
3887 * to contain the specified samples amount. The filled AVFrame data
3888 * pointers will point to this buffer.
3890 * AVFrame extended_data channel pointers are allocated if necessary for
3893 * @param frame the AVFrame
3894 * frame->nb_samples must be set prior to calling the
3895 * function. This function fills in frame->data,
3896 * frame->extended_data, frame->linesize[0].
3897 * @param nb_channels channel count
3898 * @param sample_fmt sample format
3899 * @param buf buffer to use for frame data
3900 * @param buf_size size of buffer
3901 * @param align plane size sample alignment (0 = default)
3902 * @return >=0 on success, negative error code on failure
3903 * @todo return the size in bytes required to store the samples in
3904 * case of success, at the next libavutil bump
3906 int avcodec_fill_audio_frame(AVFrame *frame, int nb_channels,
3907 enum AVSampleFormat sample_fmt, const uint8_t *buf,
3908 int buf_size, int align);
3911 * Reset the internal codec state / flush internal buffers. Should be called
3912 * e.g. when seeking or when switching to a different stream.
3914 * @note for decoders, when refcounted frames are not used
3915 * (i.e. avctx->refcounted_frames is 0), this invalidates the frames previously
3916 * returned from the decoder. When refcounted frames are used, the decoder just
3917 * releases any references it might keep internally, but the caller's reference
3920 * @note for encoders, this function will only do something if the encoder
3921 * declares support for AV_CODEC_CAP_ENCODER_FLUSH. When called, the encoder
3922 * will drain any remaining packets, and can then be re-used for a different
3923 * stream (as opposed to sending a null frame which will leave the encoder
3924 * in a permanent EOF state after draining). This can be desirable if the
3925 * cost of tearing down and replacing the encoder instance is high.
3927 void avcodec_flush_buffers(AVCodecContext *avctx);
3930 * Return codec bits per sample.
3932 * @param[in] codec_id the codec
3933 * @return Number of bits per sample or zero if unknown for the given codec.
3935 int av_get_bits_per_sample(enum AVCodecID codec_id);
3938 * Return the PCM codec associated with a sample format.
3939 * @param be endianness, 0 for little, 1 for big,
3940 * -1 (or anything else) for native
3941 * @return AV_CODEC_ID_PCM_* or AV_CODEC_ID_NONE
3943 enum AVCodecID av_get_pcm_codec(enum AVSampleFormat fmt, int be);
3946 * Return codec bits per sample.
3947 * Only return non-zero if the bits per sample is exactly correct, not an
3950 * @param[in] codec_id the codec
3951 * @return Number of bits per sample or zero if unknown for the given codec.
3953 int av_get_exact_bits_per_sample(enum AVCodecID codec_id);
3956 * Return audio frame duration.
3958 * @param avctx codec context
3959 * @param frame_bytes size of the frame, or 0 if unknown
3960 * @return frame duration, in samples, if known. 0 if not able to
3963 int av_get_audio_frame_duration(AVCodecContext *avctx, int frame_bytes);
3966 * This function is the same as av_get_audio_frame_duration(), except it works
3967 * with AVCodecParameters instead of an AVCodecContext.
3969 int av_get_audio_frame_duration2(AVCodecParameters *par, int frame_bytes);
3972 typedef struct AVBitStreamFilterContext {
3974 const struct AVBitStreamFilter *filter;
3975 AVCodecParserContext *parser;
3976 struct AVBitStreamFilterContext *next;
3978 * Internal default arguments, used if NULL is passed to av_bitstream_filter_filter().
3979 * Not for access by library users.
3982 } AVBitStreamFilterContext;
3985 * @deprecated the old bitstream filtering API (using AVBitStreamFilterContext)
3986 * is deprecated. Use the new bitstream filtering API (using AVBSFContext).
3988 attribute_deprecated
3989 void av_register_bitstream_filter(AVBitStreamFilter *bsf);
3991 * @deprecated the old bitstream filtering API (using AVBitStreamFilterContext)
3992 * is deprecated. Use av_bsf_get_by_name(), av_bsf_alloc(), and av_bsf_init()
3993 * from the new bitstream filtering API (using AVBSFContext).
3995 attribute_deprecated
3996 AVBitStreamFilterContext *av_bitstream_filter_init(const char *name);
3998 * @deprecated the old bitstream filtering API (using AVBitStreamFilterContext)
3999 * is deprecated. Use av_bsf_send_packet() and av_bsf_receive_packet() from the
4000 * new bitstream filtering API (using AVBSFContext).
4002 attribute_deprecated
4003 int av_bitstream_filter_filter(AVBitStreamFilterContext *bsfc,
4004 AVCodecContext *avctx, const char *args,
4005 uint8_t **poutbuf, int *poutbuf_size,
4006 const uint8_t *buf, int buf_size, int keyframe);
4008 * @deprecated the old bitstream filtering API (using AVBitStreamFilterContext)
4009 * is deprecated. Use av_bsf_free() from the new bitstream filtering API (using
4012 attribute_deprecated
4013 void av_bitstream_filter_close(AVBitStreamFilterContext *bsf);
4015 * @deprecated the old bitstream filtering API (using AVBitStreamFilterContext)
4016 * is deprecated. Use av_bsf_iterate() from the new bitstream filtering API (using
4019 attribute_deprecated
4020 const AVBitStreamFilter *av_bitstream_filter_next(const AVBitStreamFilter *f);
4024 attribute_deprecated
4025 const AVBitStreamFilter *av_bsf_next(void **opaque);
4031 * Same behaviour av_fast_malloc but the buffer has additional
4032 * AV_INPUT_BUFFER_PADDING_SIZE at the end which will always be 0.
4034 * In addition the whole buffer will initially and after resizes
4035 * be 0-initialized so that no uninitialized data will ever appear.
4037 void av_fast_padded_malloc(void *ptr, unsigned int *size, size_t min_size);
4040 * Same behaviour av_fast_padded_malloc except that buffer will always
4041 * be 0-initialized after call.
4043 void av_fast_padded_mallocz(void *ptr, unsigned int *size, size_t min_size);
4046 * Encode extradata length to a buffer. Used by xiph codecs.
4048 * @param s buffer to write to; must be at least (v/255+1) bytes long
4049 * @param v size of extradata in bytes
4050 * @return number of bytes written to the buffer.
4052 unsigned int av_xiphlacing(unsigned char *s, unsigned int v);
4054 #if FF_API_USER_VISIBLE_AVHWACCEL
4056 * Register the hardware accelerator hwaccel.
4058 * @deprecated This function doesn't do anything.
4060 attribute_deprecated
4061 void av_register_hwaccel(AVHWAccel *hwaccel);
4064 * If hwaccel is NULL, returns the first registered hardware accelerator,
4065 * if hwaccel is non-NULL, returns the next registered hardware accelerator
4066 * after hwaccel, or NULL if hwaccel is the last one.
4068 * @deprecated AVHWaccel structures contain no user-serviceable parts, so
4069 * this function should not be used.
4071 attribute_deprecated
4072 AVHWAccel *av_hwaccel_next(const AVHWAccel *hwaccel);
4077 * Lock operation used by lockmgr
4079 * @deprecated Deprecated together with av_lockmgr_register().
4082 AV_LOCK_CREATE, ///< Create a mutex
4083 AV_LOCK_OBTAIN, ///< Lock the mutex
4084 AV_LOCK_RELEASE, ///< Unlock the mutex
4085 AV_LOCK_DESTROY, ///< Free mutex resources
4089 * Register a user provided lock manager supporting the operations
4090 * specified by AVLockOp. The "mutex" argument to the function points
4091 * to a (void *) where the lockmgr should store/get a pointer to a user
4092 * allocated mutex. It is NULL upon AV_LOCK_CREATE and equal to the
4093 * value left by the last call for all other ops. If the lock manager is
4094 * unable to perform the op then it should leave the mutex in the same
4095 * state as when it was called and return a non-zero value. However,
4096 * when called with AV_LOCK_DESTROY the mutex will always be assumed to
4097 * have been successfully destroyed. If av_lockmgr_register succeeds
4098 * it will return a non-negative value, if it fails it will return a
4099 * negative value and destroy all mutex and unregister all callbacks.
4100 * av_lockmgr_register is not thread-safe, it must be called from a
4101 * single thread before any calls which make use of locking are used.
4103 * @param cb User defined callback. av_lockmgr_register invokes calls
4104 * to this callback and the previously registered callback.
4105 * The callback will be used to create more than one mutex
4106 * each of which must be backed by its own underlying locking
4107 * mechanism (i.e. do not use a single static object to
4108 * implement your lock manager). If cb is set to NULL the
4109 * lockmgr will be unregistered.
4111 * @deprecated This function does nothing, and always returns 0. Be sure to
4112 * build with thread support to get basic thread safety.
4114 attribute_deprecated
4115 int av_lockmgr_register(int (*cb)(void **mutex, enum AVLockOp op));
4119 * @return a positive value if s is open (i.e. avcodec_open2() was called on it
4120 * with no corresponding avcodec_close()), 0 otherwise.
4122 int avcodec_is_open(AVCodecContext *s);
4125 * Allocate a CPB properties structure and initialize its fields to default
4128 * @param size if non-NULL, the size of the allocated struct will be written
4129 * here. This is useful for embedding it in side data.
4131 * @return the newly allocated struct or NULL on failure
4133 AVCPBProperties *av_cpb_properties_alloc(size_t *size);
4139 #endif /* AVCODEC_AVCODEC_H */