2 * Indeo Video v3 compatible decoder
3 * Copyright (c) 2009 - 2011 Maxim Poliakovski
5 * This file is part of FFmpeg.
7 * FFmpeg is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU Lesser General Public
9 * License as published by the Free Software Foundation; either
10 * version 2.1 of the License, or (at your option) any later version.
12 * FFmpeg is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * Lesser General Public License for more details.
17 * You should have received a copy of the GNU Lesser General Public
18 * License along with FFmpeg; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
24 * This is a decoder for Intel Indeo Video v3.
25 * It is based on vector quantization, run-length coding and motion compensation.
26 * Known container formats: .avi and .mov
27 * Known FOURCCs: 'IV31', 'IV32'
29 * @see http://wiki.multimedia.cx/index.php?title=Indeo_3
32 #include "libavutil/imgutils.h"
33 #include "libavutil/intreadwrite.h"
36 #include "bytestream.h"
39 #include "indeo3data.h"
43 RLE_ESC_F9 = 249, ///< same as RLE_ESC_FA + do the same with next block
44 RLE_ESC_FA = 250, ///< INTRA: skip block, INTER: copy data from reference
45 RLE_ESC_FB = 251, ///< apply null delta to N blocks / skip N blocks
46 RLE_ESC_FC = 252, ///< same as RLE_ESC_FD + do the same with next block
47 RLE_ESC_FD = 253, ///< apply null delta to all remaining lines of this block
48 RLE_ESC_FE = 254, ///< apply null delta to all lines up to the 3rd line
49 RLE_ESC_FF = 255 ///< apply null delta to all lines up to the 2nd line
53 /* Some constants for parsing frame bitstream flags. */
54 #define BS_8BIT_PEL (1 << 1) ///< 8bit pixel bitdepth indicator
55 #define BS_KEYFRAME (1 << 2) ///< intra frame indicator
56 #define BS_MV_Y_HALF (1 << 4) ///< vertical mv halfpel resolution indicator
57 #define BS_MV_X_HALF (1 << 5) ///< horizontal mv halfpel resolution indicator
58 #define BS_NONREF (1 << 8) ///< nonref (discardable) frame indicator
59 #define BS_BUFFER 9 ///< indicates which of two frame buffers should be used
62 typedef struct Plane {
64 uint8_t *pixels[2]; ///< pointer to the actual pixel data of the buffers above
70 #define CELL_STACK_MAX 20
73 int16_t xpos; ///< cell coordinates in 4x4 blocks
75 int16_t width; ///< cell width in 4x4 blocks
76 int16_t height; ///< cell height in 4x4 blocks
77 uint8_t tree; ///< tree id: 0- MC tree, 1 - VQ tree
78 const int8_t *mv_ptr; ///< ptr to the motion vector if any
81 typedef struct Indeo3DecodeContext {
82 AVCodecContext *avctx;
89 const uint8_t *next_cell_data;
90 const uint8_t *last_byte;
91 const int8_t *mc_vectors;
92 unsigned num_vectors; ///< number of motion vectors in mc_vectors
94 int16_t width, height;
95 uint32_t frame_num; ///< current frame number (zero-based)
96 uint32_t data_size; ///< size of the frame data in bytes
97 uint16_t frame_flags; ///< frame properties
98 uint8_t cb_offset; ///< needed for selecting VQ tables
99 uint8_t buf_sel; ///< active frame buffer: 0 - primary, 1 -secondary
100 const uint8_t *y_data_ptr;
101 const uint8_t *v_data_ptr;
102 const uint8_t *u_data_ptr;
106 const uint8_t *alt_quant; ///< secondary VQ table set for the modes 1 and 4
108 } Indeo3DecodeContext;
111 static uint8_t requant_tab[8][128];
114 * Build the static requantization table.
115 * This table is used to remap pixel values according to a specific
116 * quant index and thus avoid overflows while adding deltas.
118 static av_cold void build_requant_tab(void)
120 static int8_t offsets[8] = { 1, 1, 2, -3, -3, 3, 4, 4 };
121 static int8_t deltas [8] = { 0, 1, 0, 4, 4, 1, 0, 1 };
125 for (i = 0; i < 8; i++) {
127 for (j = 0; j < 128; j++)
128 requant_tab[i][j] = (j + offsets[i]) / step * step + deltas[i];
131 /* some last elements calculated above will have values >= 128 */
132 /* pixel values shall never exceed 127 so set them to non-overflowing values */
133 /* according with the quantization step of the respective section */
134 requant_tab[0][127] = 126;
135 requant_tab[1][119] = 118;
136 requant_tab[1][120] = 118;
137 requant_tab[2][126] = 124;
138 requant_tab[2][127] = 124;
139 requant_tab[6][124] = 120;
140 requant_tab[6][125] = 120;
141 requant_tab[6][126] = 120;
142 requant_tab[6][127] = 120;
144 /* Patch for compatibility with the Intel's binary decoders */
145 requant_tab[1][7] = 10;
146 requant_tab[4][8] = 10;
150 static av_cold int allocate_frame_buffers(Indeo3DecodeContext *ctx,
151 AVCodecContext *avctx)
153 int p, luma_width, luma_height, chroma_width, chroma_height;
154 int luma_pitch, chroma_pitch, luma_size, chroma_size;
156 luma_width = ctx->width;
157 luma_height = ctx->height;
159 if (luma_width < 16 || luma_width > 640 ||
160 luma_height < 16 || luma_height > 480 ||
161 luma_width & 3 || luma_height & 3) {
162 av_log(avctx, AV_LOG_ERROR, "Invalid picture dimensions: %d x %d!\n",
163 luma_width, luma_height);
164 return AVERROR_INVALIDDATA;
167 chroma_width = FFALIGN(luma_width >> 2, 4);
168 chroma_height = FFALIGN(luma_height >> 2, 4);
170 luma_pitch = FFALIGN(luma_width, 16);
171 chroma_pitch = FFALIGN(chroma_width, 16);
173 /* Calculate size of the luminance plane. */
174 /* Add one line more for INTRA prediction. */
175 luma_size = luma_pitch * (luma_height + 1);
177 /* Calculate size of a chrominance planes. */
178 /* Add one line more for INTRA prediction. */
179 chroma_size = chroma_pitch * (chroma_height + 1);
181 /* allocate frame buffers */
182 for (p = 0; p < 3; p++) {
183 ctx->planes[p].pitch = !p ? luma_pitch : chroma_pitch;
184 ctx->planes[p].width = !p ? luma_width : chroma_width;
185 ctx->planes[p].height = !p ? luma_height : chroma_height;
187 ctx->planes[p].buffers[0] = av_malloc(!p ? luma_size : chroma_size);
188 ctx->planes[p].buffers[1] = av_malloc(!p ? luma_size : chroma_size);
190 /* fill the INTRA prediction lines with the middle pixel value = 64 */
191 memset(ctx->planes[p].buffers[0], 0x40, ctx->planes[p].pitch);
192 memset(ctx->planes[p].buffers[1], 0x40, ctx->planes[p].pitch);
194 /* set buffer pointers = buf_ptr + pitch and thus skip the INTRA prediction line */
195 ctx->planes[p].pixels[0] = ctx->planes[p].buffers[0] + ctx->planes[p].pitch;
196 ctx->planes[p].pixels[1] = ctx->planes[p].buffers[1] + ctx->planes[p].pitch;
203 static av_cold void free_frame_buffers(Indeo3DecodeContext *ctx)
207 for (p = 0; p < 3; p++) {
208 av_freep(&ctx->planes[p].buffers[0]);
209 av_freep(&ctx->planes[p].buffers[1]);
215 * Copy pixels of the cell(x + mv_x, y + mv_y) from the previous frame into
216 * the cell(x, y) in the current frame.
218 * @param ctx pointer to the decoder context
219 * @param plane pointer to the plane descriptor
220 * @param cell pointer to the cell descriptor
222 static void copy_cell(Indeo3DecodeContext *ctx, Plane *plane, Cell *cell)
224 int h, w, mv_x, mv_y, offset, offset_dst;
227 /* setup output and reference pointers */
228 offset_dst = (cell->ypos << 2) * plane->pitch + (cell->xpos << 2);
229 dst = plane->pixels[ctx->buf_sel] + offset_dst;
231 mv_y = cell->mv_ptr[0];
232 mv_x = cell->mv_ptr[1];
235 offset = offset_dst + mv_y * plane->pitch + mv_x;
236 src = plane->pixels[ctx->buf_sel ^ 1] + offset;
238 h = cell->height << 2;
240 for (w = cell->width; w > 0;) {
241 /* copy using 16xH blocks */
242 if (!((cell->xpos << 2) & 15) && w >= 4) {
243 for (; w >= 4; src += 16, dst += 16, w -= 4)
244 ctx->dsp.put_no_rnd_pixels_tab[0][0](dst, src, plane->pitch, h);
247 /* copy using 8xH blocks */
248 if (!((cell->xpos << 2) & 7) && w >= 2) {
249 ctx->dsp.put_no_rnd_pixels_tab[1][0](dst, src, plane->pitch, h);
256 copy_block4(dst, src, plane->pitch, plane->pitch, h);
265 /* Average 4/8 pixels at once without rounding using SWAR */
266 #define AVG_32(dst, src, ref) \
267 AV_WN32A(dst, ((AV_RN32A(src) + AV_RN32A(ref)) >> 1) & 0x7F7F7F7FUL)
269 #define AVG_64(dst, src, ref) \
270 AV_WN64A(dst, ((AV_RN64A(src) + AV_RN64A(ref)) >> 1) & 0x7F7F7F7F7F7F7F7FULL)
274 * Replicate each even pixel as follows:
275 * ABCDEFGH -> AACCEEGG
277 static inline uint64_t replicate64(uint64_t a) {
279 a &= 0xFF00FF00FF00FF00ULL;
282 a &= 0x00FF00FF00FF00FFULL;
288 static inline uint32_t replicate32(uint32_t a) {
300 /* Fill n lines with 64bit pixel value pix */
301 static inline void fill_64(uint8_t *dst, const uint64_t pix, int32_t n,
304 for (; n > 0; dst += row_offset, n--)
309 /* Error codes for cell decoding. */
320 #define BUFFER_PRECHECK \
321 if (*data_ptr >= last_ptr) \
322 return IV3_OUT_OF_DATA; \
324 #define RLE_BLOCK_COPY \
325 if (cell->mv_ptr || !skip_flag) \
326 copy_block4(dst, ref, row_offset, row_offset, 4 << v_zoom)
328 #define RLE_BLOCK_COPY_8 \
329 pix64 = AV_RN64A(ref);\
330 if (is_first_row) {/* special prediction case: top line of a cell */\
331 pix64 = replicate64(pix64);\
332 fill_64(dst + row_offset, pix64, 7, row_offset);\
333 AVG_64(dst, ref, dst + row_offset);\
335 fill_64(dst, pix64, 8, row_offset)
337 #define RLE_LINES_COPY \
338 copy_block4(dst, ref, row_offset, row_offset, num_lines << v_zoom)
340 #define RLE_LINES_COPY_M10 \
341 pix64 = AV_RN64A(ref);\
342 if (is_top_of_cell) {\
343 pix64 = replicate64(pix64);\
344 fill_64(dst + row_offset, pix64, (num_lines << 1) - 1, row_offset);\
345 AVG_64(dst, ref, dst + row_offset);\
347 fill_64(dst, pix64, num_lines << 1, row_offset)
349 #define APPLY_DELTA_4 \
350 AV_WN16A(dst + line_offset , AV_RN16A(ref ) + delta_tab->deltas[dyad1]);\
351 AV_WN16A(dst + line_offset + 2, AV_RN16A(ref + 2) + delta_tab->deltas[dyad2]);\
353 if (is_top_of_cell && !cell->ypos) {\
354 AV_COPY32(dst, dst + row_offset);\
356 AVG_32(dst, ref, dst + row_offset);\
360 #define APPLY_DELTA_8 \
361 /* apply two 32-bit VQ deltas to next even line */\
362 if (is_top_of_cell) { \
363 AV_WN32A(dst + row_offset , \
364 replicate32(AV_RN32A(ref )) + delta_tab->deltas_m10[dyad1]);\
365 AV_WN32A(dst + row_offset + 4, \
366 replicate32(AV_RN32A(ref + 4)) + delta_tab->deltas_m10[dyad2]);\
368 AV_WN32A(dst + row_offset , \
369 AV_RN32A(ref ) + delta_tab->deltas_m10[dyad1]);\
370 AV_WN32A(dst + row_offset + 4, \
371 AV_RN32A(ref + 4) + delta_tab->deltas_m10[dyad2]);\
373 /* odd lines are not coded but rather interpolated/replicated */\
374 /* first line of the cell on the top of image? - replicate */\
375 /* otherwise - interpolate */\
376 if (is_top_of_cell && !cell->ypos) {\
377 AV_COPY64(dst, dst + row_offset);\
379 AVG_64(dst, ref, dst + row_offset);
382 #define APPLY_DELTA_1011_INTER \
385 AV_RN32A(dst ) + delta_tab->deltas_m10[dyad1]);\
387 AV_RN32A(dst + 4 ) + delta_tab->deltas_m10[dyad2]);\
388 AV_WN32A(dst + row_offset , \
389 AV_RN32A(dst + row_offset ) + delta_tab->deltas_m10[dyad1]);\
390 AV_WN32A(dst + row_offset + 4, \
391 AV_RN32A(dst + row_offset + 4) + delta_tab->deltas_m10[dyad2]);\
394 AV_RN16A(dst ) + delta_tab->deltas[dyad1]);\
396 AV_RN16A(dst + 2 ) + delta_tab->deltas[dyad2]);\
397 AV_WN16A(dst + row_offset , \
398 AV_RN16A(dst + row_offset ) + delta_tab->deltas[dyad1]);\
399 AV_WN16A(dst + row_offset + 2, \
400 AV_RN16A(dst + row_offset + 2) + delta_tab->deltas[dyad2]);\
404 static int decode_cell_data(Cell *cell, uint8_t *block, uint8_t *ref_block,
405 int pitch, int h_zoom, int v_zoom, int mode,
406 const vqEntry *delta[2], int swap_quads[2],
407 const uint8_t **data_ptr, const uint8_t *last_ptr)
409 int x, y, line, num_lines;
411 uint8_t code, *dst, *ref;
412 const vqEntry *delta_tab;
413 unsigned int dyad1, dyad2;
415 int skip_flag = 0, is_top_of_cell, is_first_row = 1;
416 int row_offset, blk_row_offset, line_offset;
419 blk_row_offset = (row_offset << (2 + v_zoom)) - (cell->width << 2);
420 line_offset = v_zoom ? row_offset : 0;
422 for (y = 0; y < cell->height; is_first_row = 0, y += 1 + v_zoom) {
423 for (x = 0; x < cell->width; x += 1 + h_zoom) {
427 if (rle_blocks > 0) {
430 } else if (mode == 10 && !cell->mv_ptr) {
435 for (line = 0; line < 4;) {
437 is_top_of_cell = is_first_row && !line;
439 /* select primary VQ table for odd, secondary for even lines */
441 delta_tab = delta[line & 1];
443 delta_tab = delta[1];
445 code = bytestream_get_byte(data_ptr);
447 if (code < delta_tab->num_dyads) {
449 dyad1 = bytestream_get_byte(data_ptr);
451 if (dyad1 >= delta_tab->num_dyads || dyad1 >= 248)
455 code -= delta_tab->num_dyads;
456 dyad1 = code / delta_tab->quad_exp;
457 dyad2 = code % delta_tab->quad_exp;
458 if (swap_quads[line & 1])
459 FFSWAP(unsigned int, dyad1, dyad2);
463 } else if (mode == 10 && !cell->mv_ptr) {
466 APPLY_DELTA_1011_INTER;
469 /* process RLE codes */
479 num_lines = 257 - code - line;
484 } else if (mode == 10 && !cell->mv_ptr) {
490 code = bytestream_get_byte(data_ptr);
491 rle_blocks = (code & 0x1F) - 1; /* set block counter */
492 if (code >= 64 || rle_blocks < 0)
493 return IV3_BAD_COUNTER;
494 skip_flag = code & 0x20;
495 num_lines = 4 - line; /* enforce next block processing */
496 if (mode >= 10 || (cell->mv_ptr || !skip_flag)) {
499 } else if (mode == 10 && !cell->mv_ptr) {
511 num_lines = 4; /* enforce next block processing */
515 } else if (mode == 10 && !cell->mv_ptr) {
521 return IV3_UNSUPPORTED;
526 ref += row_offset * (num_lines << v_zoom);
527 dst += row_offset * (num_lines << v_zoom);
531 /* move to next horizontal block */
532 block += 4 << h_zoom;
533 ref_block += 4 << h_zoom;
536 /* move to next line of blocks */
537 ref_block += blk_row_offset;
538 block += blk_row_offset;
545 * Decode a vector-quantized cell.
546 * It consists of several routines, each of which handles one or more "modes"
547 * with which a cell can be encoded.
549 * @param ctx pointer to the decoder context
550 * @param avctx ptr to the AVCodecContext
551 * @param plane pointer to the plane descriptor
552 * @param cell pointer to the cell descriptor
553 * @param data_ptr pointer to the compressed data
554 * @param last_ptr pointer to the last byte to catch reads past end of buffer
555 * @return number of consumed bytes or negative number in case of error
557 static int decode_cell(Indeo3DecodeContext *ctx, AVCodecContext *avctx,
558 Plane *plane, Cell *cell, const uint8_t *data_ptr,
559 const uint8_t *last_ptr)
561 int x, mv_x, mv_y, mode, vq_index, prim_indx, second_indx;
563 int offset, error = 0, swap_quads[2];
564 uint8_t code, *block, *ref_block = 0;
565 const vqEntry *delta[2];
566 const uint8_t *data_start = data_ptr;
568 /* get coding mode and VQ table index from the VQ descriptor byte */
571 vq_index = code & 0xF;
573 /* setup output and reference pointers */
574 offset = (cell->ypos << 2) * plane->pitch + (cell->xpos << 2);
575 block = plane->pixels[ctx->buf_sel] + offset;
577 /* use previous line as reference for INTRA cells */
578 ref_block = block - plane->pitch;
579 } else if (mode >= 10) {
580 /* for mode 10 and 11 INTER first copy the predicted cell into the current one */
581 /* so we don't need to do data copying for each RLE code later */
582 copy_cell(ctx, plane, cell);
584 /* set the pointer to the reference pixels for modes 0-4 INTER */
585 mv_y = cell->mv_ptr[0];
586 mv_x = cell->mv_ptr[1];
587 offset += mv_y * plane->pitch + mv_x;
588 ref_block = plane->pixels[ctx->buf_sel ^ 1] + offset;
591 /* select VQ tables as follows: */
592 /* modes 0 and 3 use only the primary table for all lines in a block */
593 /* while modes 1 and 4 switch between primary and secondary tables on alternate lines */
594 if (mode == 1 || mode == 4) {
595 code = ctx->alt_quant[vq_index];
596 prim_indx = (code >> 4) + ctx->cb_offset;
597 second_indx = (code & 0xF) + ctx->cb_offset;
599 vq_index += ctx->cb_offset;
600 prim_indx = second_indx = vq_index;
603 if (prim_indx >= 24 || second_indx >= 24) {
604 av_log(avctx, AV_LOG_ERROR, "Invalid VQ table indexes! Primary: %d, secondary: %d!\n",
605 prim_indx, second_indx);
606 return AVERROR_INVALIDDATA;
609 delta[0] = &vq_tab[second_indx];
610 delta[1] = &vq_tab[prim_indx];
611 swap_quads[0] = second_indx >= 16;
612 swap_quads[1] = prim_indx >= 16;
614 /* requantize the prediction if VQ index of this cell differs from VQ index */
615 /* of the predicted cell in order to avoid overflows. */
616 if (vq_index >= 8 && ref_block) {
617 for (x = 0; x < cell->width << 2; x++)
618 ref_block[x] = requant_tab[vq_index & 7][ref_block[x]];
624 case 0: /*------------------ MODES 0 & 1 (4x4 block processing) --------------------*/
626 case 3: /*------------------ MODES 3 & 4 (4x8 block processing) --------------------*/
628 if (mode >= 3 && cell->mv_ptr) {
629 av_log(avctx, AV_LOG_ERROR, "Attempt to apply Mode 3/4 to an INTER cell!\n");
630 return AVERROR_INVALIDDATA;
633 zoom_fac = mode >= 3;
634 error = decode_cell_data(cell, block, ref_block, plane->pitch, 0, zoom_fac,
635 mode, delta, swap_quads, &data_ptr, last_ptr);
637 case 10: /*-------------------- MODE 10 (8x8 block processing) ---------------------*/
638 case 11: /*----------------- MODE 11 (4x8 INTER block processing) ------------------*/
639 if (mode == 10 && !cell->mv_ptr) { /* MODE 10 INTRA processing */
640 error = decode_cell_data(cell, block, ref_block, plane->pitch, 1, 1,
641 mode, delta, swap_quads, &data_ptr, last_ptr);
642 } else { /* mode 10 and 11 INTER processing */
643 if (mode == 11 && !cell->mv_ptr) {
644 av_log(avctx, AV_LOG_ERROR, "Attempt to use Mode 11 for an INTRA cell!\n");
645 return AVERROR_INVALIDDATA;
648 zoom_fac = mode == 10;
649 error = decode_cell_data(cell, block, ref_block, plane->pitch,
650 zoom_fac, 1, mode, delta, swap_quads,
651 &data_ptr, last_ptr);
655 av_log(avctx, AV_LOG_ERROR, "Unsupported coding mode: %d\n", mode);
656 return AVERROR_INVALIDDATA;
661 av_log(avctx, AV_LOG_ERROR, "Mode %d: RLE code %X is not allowed at the current line\n",
663 return AVERROR_INVALIDDATA;
665 av_log(avctx, AV_LOG_ERROR, "Mode %d: invalid VQ data\n", mode);
666 return AVERROR_INVALIDDATA;
667 case IV3_BAD_COUNTER:
668 av_log(avctx, AV_LOG_ERROR, "Mode %d: RLE-FB invalid counter: %d\n", mode, code);
669 return AVERROR_INVALIDDATA;
670 case IV3_UNSUPPORTED:
671 av_log(avctx, AV_LOG_ERROR, "Mode %d: unsupported RLE code: %X\n", mode, data_ptr[-1]);
672 return AVERROR_INVALIDDATA;
673 case IV3_OUT_OF_DATA:
674 av_log(avctx, AV_LOG_ERROR, "Mode %d: attempt to read past end of buffer\n", mode);
675 return AVERROR_INVALIDDATA;
678 return data_ptr - data_start; /* report number of bytes consumed from the input buffer */
682 /* Binary tree codes. */
691 #define SPLIT_CELL(size, new_size) (new_size) = ((size) > 2) ? ((((size) + 2) >> 2) << 1) : 1
693 #define UPDATE_BITPOS(n) \
694 ctx->skip_bits += (n); \
697 #define RESYNC_BITSTREAM \
698 if (ctx->need_resync && !(get_bits_count(&ctx->gb) & 7)) { \
699 skip_bits_long(&ctx->gb, ctx->skip_bits); \
700 ctx->skip_bits = 0; \
701 ctx->need_resync = 0; \
705 if (curr_cell.xpos + curr_cell.width > (plane->width >> 2) || \
706 curr_cell.ypos + curr_cell.height > (plane->height >> 2)) { \
707 av_log(avctx, AV_LOG_ERROR, "Invalid cell: x=%d, y=%d, w=%d, h=%d\n", \
708 curr_cell.xpos, curr_cell.ypos, curr_cell.width, curr_cell.height); \
709 return AVERROR_INVALIDDATA; \
713 static int parse_bintree(Indeo3DecodeContext *ctx, AVCodecContext *avctx,
714 Plane *plane, int code, Cell *ref_cell,
715 const int depth, const int strip_width)
721 av_log(avctx, AV_LOG_ERROR, "Stack overflow (corrupted binary tree)!\n");
722 return AVERROR_INVALIDDATA; // unwind recursion
725 curr_cell = *ref_cell; // clone parent cell
726 if (code == H_SPLIT) {
727 SPLIT_CELL(ref_cell->height, curr_cell.height);
728 ref_cell->ypos += curr_cell.height;
729 ref_cell->height -= curr_cell.height;
730 } else if (code == V_SPLIT) {
731 if (curr_cell.width > strip_width) {
733 curr_cell.width = (curr_cell.width <= (strip_width << 1) ? 1 : 2) * strip_width;
735 SPLIT_CELL(ref_cell->width, curr_cell.width);
736 ref_cell->xpos += curr_cell.width;
737 ref_cell->width -= curr_cell.width;
740 while (get_bits_left(&ctx->gb) >= 2) { /* loop until return */
742 switch (code = get_bits(&ctx->gb, 2)) {
745 if (parse_bintree(ctx, avctx, plane, code, &curr_cell, depth - 1, strip_width))
746 return AVERROR_INVALIDDATA;
749 if (!curr_cell.tree) { /* MC tree INTRA code */
750 curr_cell.mv_ptr = 0; /* mark the current strip as INTRA */
751 curr_cell.tree = 1; /* enter the VQ tree */
752 } else { /* VQ tree NULL code */
754 code = get_bits(&ctx->gb, 2);
756 av_log(avctx, AV_LOG_ERROR, "Invalid VQ_NULL code: %d\n", code);
757 return AVERROR_INVALIDDATA;
760 av_log(avctx, AV_LOG_ERROR, "SkipCell procedure not implemented yet!\n");
763 if (!curr_cell.mv_ptr)
764 return AVERROR_INVALIDDATA;
765 copy_cell(ctx, plane, &curr_cell);
770 if (!curr_cell.tree) { /* MC tree INTER code */
772 /* get motion vector index and setup the pointer to the mv set */
773 if (!ctx->need_resync)
774 ctx->next_cell_data = &ctx->gb.buffer[(get_bits_count(&ctx->gb) + 7) >> 3];
775 mv_idx = *(ctx->next_cell_data++);
776 if (mv_idx >= ctx->num_vectors) {
777 av_log(avctx, AV_LOG_ERROR, "motion vector index out of range\n");
778 return AVERROR_INVALIDDATA;
780 curr_cell.mv_ptr = &ctx->mc_vectors[mv_idx << 1];
781 curr_cell.tree = 1; /* enter the VQ tree */
783 } else { /* VQ tree DATA code */
784 if (!ctx->need_resync)
785 ctx->next_cell_data = &ctx->gb.buffer[(get_bits_count(&ctx->gb) + 7) >> 3];
788 bytes_used = decode_cell(ctx, avctx, plane, &curr_cell,
789 ctx->next_cell_data, ctx->last_byte);
791 return AVERROR_INVALIDDATA;
793 UPDATE_BITPOS(bytes_used << 3);
794 ctx->next_cell_data += bytes_used;
801 return AVERROR_INVALIDDATA;
805 static int decode_plane(Indeo3DecodeContext *ctx, AVCodecContext *avctx,
806 Plane *plane, const uint8_t *data, int32_t data_size,
810 unsigned num_vectors;
812 /* each plane data starts with mc_vector_count field, */
813 /* an optional array of motion vectors followed by the vq data */
814 num_vectors = bytestream_get_le32(&data);
815 if (num_vectors > 256) {
816 av_log(ctx->avctx, AV_LOG_ERROR,
817 "Read invalid number of motion vectors %d\n", num_vectors);
818 return AVERROR_INVALIDDATA;
820 if (num_vectors * 2 >= data_size)
821 return AVERROR_INVALIDDATA;
823 ctx->num_vectors = num_vectors;
824 ctx->mc_vectors = num_vectors ? data : 0;
826 /* init the bitreader */
827 init_get_bits(&ctx->gb, &data[num_vectors * 2], (data_size - num_vectors * 2) << 3);
829 ctx->need_resync = 0;
831 ctx->last_byte = data + data_size - 1;
833 /* initialize the 1st cell and set its dimensions to whole plane */
834 curr_cell.xpos = curr_cell.ypos = 0;
835 curr_cell.width = plane->width >> 2;
836 curr_cell.height = plane->height >> 2;
837 curr_cell.tree = 0; // we are in the MC tree now
838 curr_cell.mv_ptr = 0; // no motion vector = INTRA cell
840 return parse_bintree(ctx, avctx, plane, INTRA_NULL, &curr_cell, CELL_STACK_MAX, strip_width);
844 #define OS_HDR_ID MKBETAG('F', 'R', 'M', 'H')
846 static int decode_frame_headers(Indeo3DecodeContext *ctx, AVCodecContext *avctx,
847 const uint8_t *buf, int buf_size)
849 const uint8_t *buf_ptr = buf, *bs_hdr;
850 uint32_t frame_num, word2, check_sum, data_size;
851 uint32_t y_offset, u_offset, v_offset, starts[3], ends[3];
852 uint16_t height, width;
855 /* parse and check the OS header */
856 frame_num = bytestream_get_le32(&buf_ptr);
857 word2 = bytestream_get_le32(&buf_ptr);
858 check_sum = bytestream_get_le32(&buf_ptr);
859 data_size = bytestream_get_le32(&buf_ptr);
861 if ((frame_num ^ word2 ^ data_size ^ OS_HDR_ID) != check_sum) {
862 av_log(avctx, AV_LOG_ERROR, "OS header checksum mismatch!\n");
863 return AVERROR_INVALIDDATA;
866 /* parse the bitstream header */
869 if (bytestream_get_le16(&buf_ptr) != 32) {
870 av_log(avctx, AV_LOG_ERROR, "Unsupported codec version!\n");
871 return AVERROR_INVALIDDATA;
874 ctx->frame_num = frame_num;
875 ctx->frame_flags = bytestream_get_le16(&buf_ptr);
876 ctx->data_size = (bytestream_get_le32(&buf_ptr) + 7) >> 3;
877 ctx->cb_offset = *buf_ptr++;
879 if (ctx->data_size == 16)
881 if (ctx->data_size > buf_size)
882 ctx->data_size = buf_size;
884 buf_ptr += 3; // skip reserved byte and checksum
886 /* check frame dimensions */
887 height = bytestream_get_le16(&buf_ptr);
888 width = bytestream_get_le16(&buf_ptr);
889 if (av_image_check_size(width, height, 0, avctx))
890 return AVERROR_INVALIDDATA;
892 if (width != ctx->width || height != ctx->height) {
893 av_dlog(avctx, "Frame dimensions changed!\n");
896 ctx->height = height;
898 free_frame_buffers(ctx);
899 if(allocate_frame_buffers(ctx, avctx) < 0)
900 return AVERROR_INVALIDDATA;
901 avcodec_set_dimensions(avctx, width, height);
904 y_offset = bytestream_get_le32(&buf_ptr);
905 v_offset = bytestream_get_le32(&buf_ptr);
906 u_offset = bytestream_get_le32(&buf_ptr);
908 /* unfortunately there is no common order of planes in the buffer */
909 /* so we use that sorting algo for determining planes data sizes */
910 starts[0] = y_offset;
911 starts[1] = v_offset;
912 starts[2] = u_offset;
914 for (j = 0; j < 3; j++) {
915 ends[j] = ctx->data_size;
916 for (i = 2; i >= 0; i--)
917 if (starts[i] < ends[j] && starts[i] > starts[j])
921 ctx->y_data_size = ends[0] - starts[0];
922 ctx->v_data_size = ends[1] - starts[1];
923 ctx->u_data_size = ends[2] - starts[2];
924 if (FFMAX3(y_offset, v_offset, u_offset) >= ctx->data_size - 16 ||
925 FFMIN3(ctx->y_data_size, ctx->v_data_size, ctx->u_data_size) <= 0) {
926 av_log(avctx, AV_LOG_ERROR, "One of the y/u/v offsets is invalid\n");
927 return AVERROR_INVALIDDATA;
930 ctx->y_data_ptr = bs_hdr + y_offset;
931 ctx->v_data_ptr = bs_hdr + v_offset;
932 ctx->u_data_ptr = bs_hdr + u_offset;
933 ctx->alt_quant = buf_ptr + sizeof(uint32_t);
935 if (ctx->data_size == 16) {
936 av_log(avctx, AV_LOG_DEBUG, "Sync frame encountered!\n");
940 if (ctx->frame_flags & BS_8BIT_PEL) {
941 av_log_ask_for_sample(avctx, "8-bit pixel format\n");
942 return AVERROR_PATCHWELCOME;
945 if (ctx->frame_flags & BS_MV_X_HALF || ctx->frame_flags & BS_MV_Y_HALF) {
946 av_log_ask_for_sample(avctx, "halfpel motion vectors\n");
947 return AVERROR_PATCHWELCOME;
955 * Convert and output the current plane.
956 * All pixel values will be upsampled by shifting right by one bit.
958 * @param[in] plane pointer to the descriptor of the plane being processed
959 * @param[in] buf_sel indicates which frame buffer the input data stored in
960 * @param[out] dst pointer to the buffer receiving converted pixels
961 * @param[in] dst_pitch pitch for moving to the next y line
963 static void output_plane(const Plane *plane, int buf_sel, uint8_t *dst, int dst_pitch)
966 const uint8_t *src = plane->pixels[buf_sel];
967 uint32_t pitch = plane->pitch;
969 for (y = 0; y < plane->height; y++) {
970 /* convert four pixels at once using SWAR */
971 for (x = 0; x < plane->width >> 2; x++) {
972 AV_WN32A(dst, (AV_RN32A(src) & 0x7F7F7F7F) << 1);
977 for (x <<= 2; x < plane->width; x++)
978 *dst++ = *src++ << 1;
980 src += pitch - plane->width;
981 dst += dst_pitch - plane->width;
986 static av_cold int decode_init(AVCodecContext *avctx)
988 Indeo3DecodeContext *ctx = avctx->priv_data;
991 ctx->width = avctx->width;
992 ctx->height = avctx->height;
993 avctx->pix_fmt = PIX_FMT_YUV410P;
994 avcodec_get_frame_defaults(&ctx->frame);
998 ff_dsputil_init(&ctx->dsp, avctx);
1000 return allocate_frame_buffers(ctx, avctx);
1004 static int decode_frame(AVCodecContext *avctx, void *data, int *data_size,
1007 Indeo3DecodeContext *ctx = avctx->priv_data;
1008 const uint8_t *buf = avpkt->data;
1009 int buf_size = avpkt->size;
1012 res = decode_frame_headers(ctx, avctx, buf, buf_size);
1016 /* skip sync(null) frames */
1018 // we have processed 16 bytes but no data was decoded
1023 /* skip droppable INTER frames if requested */
1024 if (ctx->frame_flags & BS_NONREF &&
1025 (avctx->skip_frame >= AVDISCARD_NONREF))
1028 /* skip INTER frames if requested */
1029 if (!(ctx->frame_flags & BS_KEYFRAME) && avctx->skip_frame >= AVDISCARD_NONKEY)
1032 /* use BS_BUFFER flag for buffer switching */
1033 ctx->buf_sel = (ctx->frame_flags >> BS_BUFFER) & 1;
1035 /* decode luma plane */
1036 if ((res = decode_plane(ctx, avctx, ctx->planes, ctx->y_data_ptr, ctx->y_data_size, 40)))
1039 /* decode chroma planes */
1040 if ((res = decode_plane(ctx, avctx, &ctx->planes[1], ctx->u_data_ptr, ctx->u_data_size, 10)))
1043 if ((res = decode_plane(ctx, avctx, &ctx->planes[2], ctx->v_data_ptr, ctx->v_data_size, 10)))
1046 if (ctx->frame.data[0])
1047 avctx->release_buffer(avctx, &ctx->frame);
1049 ctx->frame.reference = 0;
1050 if ((res = avctx->get_buffer(avctx, &ctx->frame)) < 0) {
1051 av_log(ctx->avctx, AV_LOG_ERROR, "get_buffer() failed\n");
1055 output_plane(&ctx->planes[0], ctx->buf_sel, ctx->frame.data[0], ctx->frame.linesize[0]);
1056 output_plane(&ctx->planes[1], ctx->buf_sel, ctx->frame.data[1], ctx->frame.linesize[1]);
1057 output_plane(&ctx->planes[2], ctx->buf_sel, ctx->frame.data[2], ctx->frame.linesize[2]);
1059 *data_size = sizeof(AVFrame);
1060 *(AVFrame*)data = ctx->frame;
1066 static av_cold int decode_close(AVCodecContext *avctx)
1068 Indeo3DecodeContext *ctx = avctx->priv_data;
1070 free_frame_buffers(avctx->priv_data);
1072 if (ctx->frame.data[0])
1073 avctx->release_buffer(avctx, &ctx->frame);
1078 AVCodec ff_indeo3_decoder = {
1080 .type = AVMEDIA_TYPE_VIDEO,
1081 .id = CODEC_ID_INDEO3,
1082 .priv_data_size = sizeof(Indeo3DecodeContext),
1083 .init = decode_init,
1084 .close = decode_close,
1085 .decode = decode_frame,
1086 .long_name = NULL_IF_CONFIG_SMALL("Intel Indeo 3"),