3 * Copyright (c) 2002 Fabrice Bellard
5 * This file is part of FFmpeg.
7 * FFmpeg is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU Lesser General Public
9 * License as published by the Free Software Foundation; either
10 * version 2.1 of the License, or (at your option) any later version.
12 * FFmpeg is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * Lesser General Public License for more details.
17 * You should have received a copy of the GNU Lesser General Public
18 * License along with FFmpeg; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
21 #ifndef AVFORMAT_RTSP_H
22 #define AVFORMAT_RTSP_H
26 #include "rtspcodes.h"
31 #include "libavutil/log.h"
32 #include "libavutil/opt.h"
35 * Network layer over which RTP/etc packet data will be transported.
37 enum RTSPLowerTransport {
38 RTSP_LOWER_TRANSPORT_UDP = 0, /**< UDP/unicast */
39 RTSP_LOWER_TRANSPORT_TCP = 1, /**< TCP; interleaved in RTSP */
40 RTSP_LOWER_TRANSPORT_UDP_MULTICAST = 2, /**< UDP/multicast */
41 RTSP_LOWER_TRANSPORT_NB,
42 RTSP_LOWER_TRANSPORT_HTTP = 8, /**< HTTP tunneled - not a proper
43 transport mode as such,
44 only for use via AVOptions */
48 * Packet profile of the data that we will be receiving. Real servers
49 * commonly send RDT (although they can sometimes send RTP as well),
50 * whereas most others will send RTP.
53 RTSP_TRANSPORT_RTP, /**< Standards-compliant RTP */
54 RTSP_TRANSPORT_RDT, /**< Realmedia Data Transport */
55 RTSP_TRANSPORT_RAW, /**< Raw data (over UDP) */
60 * Transport mode for the RTSP data. This may be plain, or
61 * tunneled, which is done over HTTP.
63 enum RTSPControlTransport {
64 RTSP_MODE_PLAIN, /**< Normal RTSP */
65 RTSP_MODE_TUNNEL /**< RTSP over HTTP (tunneling) */
68 #define RTSP_DEFAULT_PORT 554
69 #define RTSP_MAX_TRANSPORTS 8
70 #define RTSP_TCP_MAX_PACKET_SIZE 1472
71 #define RTSP_DEFAULT_NB_AUDIO_CHANNELS 1
72 #define RTSP_DEFAULT_AUDIO_SAMPLERATE 44100
73 #define RTSP_RTP_PORT_MIN 5000
74 #define RTSP_RTP_PORT_MAX 65000
77 * This describes a single item in the "Transport:" line of one stream as
78 * negotiated by the SETUP RTSP command. Multiple transports are comma-
79 * separated ("Transport: x-read-rdt/tcp;interleaved=0-1,rtp/avp/udp;
80 * client_port=1000-1001;server_port=1800-1801") and described in separate
81 * RTSPTransportFields.
83 typedef struct RTSPTransportField {
84 /** interleave ids, if TCP transport; each TCP/RTSP data packet starts
85 * with a '$', stream length and stream ID. If the stream ID is within
86 * the range of this interleaved_min-max, then the packet belongs to
88 int interleaved_min, interleaved_max;
90 /** UDP multicast port range; the ports to which we should connect to
91 * receive multicast UDP data. */
92 int port_min, port_max;
94 /** UDP client ports; these should be the local ports of the UDP RTP
95 * (and RTCP) sockets over which we receive RTP/RTCP data. */
96 int client_port_min, client_port_max;
98 /** UDP unicast server port range; the ports to which we should connect
99 * to receive unicast UDP RTP/RTCP data. */
100 int server_port_min, server_port_max;
102 /** time-to-live value (required for multicast); the amount of HOPs that
103 * packets will be allowed to make before being discarded. */
106 /** transport set to record data */
109 struct sockaddr_storage destination; /**< destination IP address */
110 char source[INET6_ADDRSTRLEN + 1]; /**< source IP address */
112 /** data/packet transport protocol; e.g. RTP or RDT */
113 enum RTSPTransport transport;
115 /** network layer transport protocol; e.g. TCP or UDP uni-/multicast */
116 enum RTSPLowerTransport lower_transport;
117 } RTSPTransportField;
120 * This describes the server response to each RTSP command.
122 typedef struct RTSPMessageHeader {
123 /** length of the data following this header */
126 enum RTSPStatusCode status_code; /**< response code from server */
128 /** number of items in the 'transports' variable below */
131 /** Time range of the streams that the server will stream. In
132 * AV_TIME_BASE unit, AV_NOPTS_VALUE if not used */
133 int64_t range_start, range_end;
135 /** describes the complete "Transport:" line of the server in response
136 * to a SETUP RTSP command by the client */
137 RTSPTransportField transports[RTSP_MAX_TRANSPORTS];
139 int seq; /**< sequence number */
141 /** the "Session:" field. This value is initially set by the server and
142 * should be re-transmitted by the client in every RTSP command. */
143 char session_id[512];
145 /** the "Location:" field. This value is used to handle redirection.
149 /** the "RealChallenge1:" field from the server */
150 char real_challenge[64];
152 /** the "Server: field, which can be used to identify some special-case
153 * servers that are not 100% standards-compliant. We use this to identify
154 * Windows Media Server, which has a value "WMServer/v.e.r.sion", where
155 * version is a sequence of digits (e.g. 9.0.0.3372). Helix/Real servers
156 * use something like "Helix [..] Server Version v.e.r.sion (platform)
157 * (RealServer compatible)" or "RealServer Version v.e.r.sion (platform)",
158 * where platform is the output of $uname -msr | sed 's/ /-/g'. */
161 /** The "timeout" comes as part of the server response to the "SETUP"
162 * command, in the "Session: <xyz>[;timeout=<value>]" line. It is the
163 * time, in seconds, that the server will go without traffic over the
164 * RTSP/TCP connection before it closes the connection. To prevent
165 * this, sent dummy requests (e.g. OPTIONS) with intervals smaller
166 * than this value. */
169 /** The "Notice" or "X-Notice" field value. See
170 * http://tools.ietf.org/html/draft-stiemerling-rtsp-announce-00
171 * for a complete list of supported values. */
174 /** The "reason" is meant to specify better the meaning of the error code
180 * Content type header
182 char content_type[64];
186 * Client state, i.e. whether we are currently receiving data (PLAYING) or
187 * setup-but-not-receiving (PAUSED). State can be changed in applications
188 * by calling av_read_play/pause().
190 enum RTSPClientState {
191 RTSP_STATE_IDLE, /**< not initialized */
192 RTSP_STATE_STREAMING, /**< initialized and sending/receiving data */
193 RTSP_STATE_PAUSED, /**< initialized, but not receiving data */
194 RTSP_STATE_SEEKING, /**< initialized, requesting a seek */
198 * Identify particular servers that require special handling, such as
199 * standards-incompliant "Transport:" lines in the SETUP request.
201 enum RTSPServerType {
202 RTSP_SERVER_RTP, /**< Standards-compliant RTP-server */
203 RTSP_SERVER_REAL, /**< Realmedia-style server */
204 RTSP_SERVER_WMS, /**< Windows Media server */
209 * Private data for the RTSP demuxer.
211 * @todo Use AVIOContext instead of URLContext
213 typedef struct RTSPState {
214 const AVClass *class; /**< Class for private options. */
215 URLContext *rtsp_hd; /* RTSP TCP connection handle */
217 /** number of items in the 'rtsp_streams' variable */
220 struct RTSPStream **rtsp_streams; /**< streams in this session */
222 /** indicator of whether we are currently receiving data from the
223 * server. Basically this isn't more than a simple cache of the
224 * last PLAY/PAUSE command sent to the server, to make sure we don't
225 * send 2x the same unexpectedly or commands in the wrong state. */
226 enum RTSPClientState state;
228 /** the seek value requested when calling av_seek_frame(). This value
229 * is subsequently used as part of the "Range" parameter when emitting
230 * the RTSP PLAY command. If we are currently playing, this command is
231 * called instantly. If we are currently paused, this command is called
232 * whenever we resume playback. Either way, the value is only used once,
233 * see rtsp_read_play() and rtsp_read_seek(). */
234 int64_t seek_timestamp;
236 int seq; /**< RTSP command sequence number */
238 /** copy of RTSPMessageHeader->session_id, i.e. the server-provided session
239 * identifier that the client should re-transmit in each RTSP command */
240 char session_id[512];
242 /** copy of RTSPMessageHeader->timeout, i.e. the time (in seconds) that
243 * the server will go without traffic on the RTSP/TCP line before it
244 * closes the connection. */
247 /** timestamp of the last RTSP command that we sent to the RTSP server.
248 * This is used to calculate when to send dummy commands to keep the
249 * connection alive, in conjunction with timeout. */
250 int64_t last_cmd_time;
252 /** the negotiated data/packet transport protocol; e.g. RTP or RDT */
253 enum RTSPTransport transport;
255 /** the negotiated network layer transport protocol; e.g. TCP or UDP
257 enum RTSPLowerTransport lower_transport;
259 /** brand of server that we're talking to; e.g. WMS, REAL or other.
260 * Detected based on the value of RTSPMessageHeader->server or the presence
261 * of RTSPMessageHeader->real_challenge */
262 enum RTSPServerType server_type;
264 /** the "RealChallenge1:" field from the server */
265 char real_challenge[64];
267 /** plaintext authorization line (username:password) */
270 /** authentication state */
271 HTTPAuthState auth_state;
273 /** The last reply of the server to a RTSP command */
274 char last_reply[2048]; /* XXX: allocate ? */
276 /** RTSPStream->transport_priv of the last stream that we read a
278 void *cur_transport_priv;
280 /** The following are used for Real stream selection */
282 /** whether we need to send a "SET_PARAMETER Subscribe:" command */
283 int need_subscription;
285 /** stream setup during the last frame read. This is used to detect if
286 * we need to subscribe or unsubscribe to any new streams. */
287 enum AVDiscard *real_setup_cache;
289 /** current stream setup. This is a temporary buffer used to compare
290 * current setup to previous frame setup. */
291 enum AVDiscard *real_setup;
293 /** the last value of the "SET_PARAMETER Subscribe:" RTSP command.
294 * this is used to send the same "Unsubscribe:" if stream setup changed,
295 * before sending a new "Subscribe:" command. */
296 char last_subscription[1024];
299 /** The following are used for RTP/ASF streams */
301 /** ASF demuxer context for the embedded ASF stream from WMS servers */
302 AVFormatContext *asf_ctx;
304 /** cache for position of the asf demuxer, since we load a new
305 * data packet in the bytecontext for each incoming RTSP packet. */
309 /** some MS RTSP streams contain a URL in the SDP that we need to use
310 * for all subsequent RTSP requests, rather than the input URI; in
311 * other cases, this is a copy of AVFormatContext->filename. */
312 char control_uri[1024];
314 /** The following are used for parsing raw mpegts in udp */
316 struct MpegTSContext *ts;
321 /** Additional output handle, used when input and output are done
322 * separately, eg for HTTP tunneling. */
323 URLContext *rtsp_hd_out;
325 /** RTSP transport mode, such as plain or tunneled. */
326 enum RTSPControlTransport control_transport;
328 /* Number of RTCP BYE packets the RTSP session has received.
329 * An EOF is propagated back if nb_byes == nb_streams.
330 * This is reset after a seek. */
333 /** Reusable buffer for receiving packets */
337 * A mask with all requested transport methods
339 int lower_transport_mask;
342 * The number of returned packets
347 * Polling array for udp
352 * Whether the server supports the GET_PARAMETER method.
354 int get_parameter_supported;
357 * Do not begin to play the stream immediately.
362 * Option flags for the chained RTP muxer.
366 /** Whether the server accepts the x-Dynamic-Rate header */
367 int accept_dynamic_rate;
370 * Various option flags for the RTSP muxer/demuxer.
375 * Mask of all requested media types
380 * Minimum and maximum local UDP ports.
382 int rtp_port_min, rtp_port_max;
385 * Timeout to wait for incoming connections.
390 #define RTSP_FLAG_FILTER_SRC 0x1 /**< Filter incoming UDP packets -
391 receive packets only from the right
392 source address and port. */
393 #define RTSP_FLAG_LISTEN 0x2 /**< Wait for incoming connections. */
396 * Describe a single stream, as identified by a single m= line block in the
397 * SDP content. In the case of RDT, one RTSPStream can represent multiple
398 * AVStreams. In this case, each AVStream in this set has similar content
399 * (but different codec/bitrate).
401 typedef struct RTSPStream {
402 URLContext *rtp_handle; /**< RTP stream handle (if UDP) */
403 void *transport_priv; /**< RTP/RDT parse context if input, RTP AVFormatContext if output */
405 /** corresponding stream index, if any. -1 if none (MPEG2TS case) */
408 /** interleave IDs; copies of RTSPTransportField->interleaved_min/max
409 * for the selected transport. Only used for TCP. */
410 int interleaved_min, interleaved_max;
412 char control_url[1024]; /**< url for this stream (from SDP) */
414 /** The following are used only in SDP, not RTSP */
416 int sdp_port; /**< port (from SDP content) */
417 struct sockaddr_storage sdp_ip; /**< IP address (from SDP content) */
418 int sdp_ttl; /**< IP Time-To-Live (from SDP content) */
419 int sdp_payload_type; /**< payload type */
422 /** The following are used for dynamic protocols (rtp_*.c/rdt.c) */
424 /** handler structure */
425 RTPDynamicProtocolHandler *dynamic_handler;
427 /** private data associated with the dynamic protocol */
428 PayloadContext *dynamic_protocol_context;
432 void ff_rtsp_parse_line(RTSPMessageHeader *reply, const char *buf,
433 RTSPState *rt, const char *method);
436 * Send a command to the RTSP server without waiting for the reply.
438 * @see rtsp_send_cmd_with_content_async
440 int ff_rtsp_send_cmd_async(AVFormatContext *s, const char *method,
441 const char *url, const char *headers);
444 * Send a command to the RTSP server and wait for the reply.
446 * @param s RTSP (de)muxer context
447 * @param method the method for the request
448 * @param url the target url for the request
449 * @param headers extra header lines to include in the request
450 * @param reply pointer where the RTSP message header will be stored
451 * @param content_ptr pointer where the RTSP message body, if any, will
452 * be stored (length is in reply)
453 * @param send_content if non-null, the data to send as request body content
454 * @param send_content_length the length of the send_content data, or 0 if
455 * send_content is null
457 * @return zero if success, nonzero otherwise
459 int ff_rtsp_send_cmd_with_content(AVFormatContext *s,
460 const char *method, const char *url,
462 RTSPMessageHeader *reply,
463 unsigned char **content_ptr,
464 const unsigned char *send_content,
465 int send_content_length);
468 * Send a command to the RTSP server and wait for the reply.
470 * @see rtsp_send_cmd_with_content
472 int ff_rtsp_send_cmd(AVFormatContext *s, const char *method,
473 const char *url, const char *headers,
474 RTSPMessageHeader *reply, unsigned char **content_ptr);
477 * Read a RTSP message from the server, or prepare to read data
478 * packets if we're reading data interleaved over the TCP/RTSP
479 * connection as well.
481 * @param s RTSP (de)muxer context
482 * @param reply pointer where the RTSP message header will be stored
483 * @param content_ptr pointer where the RTSP message body, if any, will
484 * be stored (length is in reply)
485 * @param return_on_interleaved_data whether the function may return if we
486 * encounter a data marker ('$'), which precedes data
487 * packets over interleaved TCP/RTSP connections. If this
488 * is set, this function will return 1 after encountering
489 * a '$'. If it is not set, the function will skip any
490 * data packets (if they are encountered), until a reply
491 * has been fully parsed. If no more data is available
492 * without parsing a reply, it will return an error.
493 * @param method the RTSP method this is a reply to. This affects how
494 * some response headers are acted upon. May be NULL.
496 * @return 1 if a data packets is ready to be received, -1 on error,
499 int ff_rtsp_read_reply(AVFormatContext *s, RTSPMessageHeader *reply,
500 unsigned char **content_ptr,
501 int return_on_interleaved_data, const char *method);
504 * Skip a RTP/TCP interleaved packet.
506 void ff_rtsp_skip_packet(AVFormatContext *s);
509 * Connect to the RTSP server and set up the individual media streams.
510 * This can be used for both muxers and demuxers.
512 * @param s RTSP (de)muxer context
514 * @return 0 on success, < 0 on error. Cleans up all allocations done
515 * within the function on error.
517 int ff_rtsp_connect(AVFormatContext *s);
520 * Close and free all streams within the RTSP (de)muxer
522 * @param s RTSP (de)muxer context
524 void ff_rtsp_close_streams(AVFormatContext *s);
527 * Close all connection handles within the RTSP (de)muxer
529 * @param s RTSP (de)muxer context
531 void ff_rtsp_close_connections(AVFormatContext *s);
534 * Get the description of the stream and set up the RTSPStream child
537 int ff_rtsp_setup_input_streams(AVFormatContext *s, RTSPMessageHeader *reply);
540 * Announce the stream to the server and set up the RTSPStream child
541 * objects for each media stream.
543 int ff_rtsp_setup_output_streams(AVFormatContext *s, const char *addr);
546 * Parse RTSP commands (OPTIONS, PAUSE and TEARDOWN) during streaming in
549 int ff_rtsp_parse_streaming_commands(AVFormatContext *s);
552 * Parse an SDP description of streams by populating an RTSPState struct
553 * within the AVFormatContext; also allocate the RTP streams and the
554 * pollfd array used for UDP streams.
556 int ff_sdp_parse(AVFormatContext *s, const char *content);
559 * Receive one RTP packet from an TCP interleaved RTSP stream.
561 int ff_rtsp_tcp_read_packet(AVFormatContext *s, RTSPStream **prtsp_st,
562 uint8_t *buf, int buf_size);
565 * Receive one packet from the RTSPStreams set up in the AVFormatContext
566 * (which should contain a RTSPState struct as priv_data).
568 int ff_rtsp_fetch_packet(AVFormatContext *s, AVPacket *pkt);
571 * Do the SETUP requests for each stream for the chosen
572 * lower transport mode.
573 * @return 0 on success, <0 on error, 1 if protocol is unavailable
575 int ff_rtsp_make_setup_request(AVFormatContext *s, const char *host, int port,
576 int lower_transport, const char *real_challenge);
579 * Undo the effect of ff_rtsp_make_setup_request, close the
580 * transport_priv and rtp_handle fields.
582 void ff_rtsp_undo_setup(AVFormatContext *s);
585 * Open RTSP transport context.
587 int ff_rtsp_open_transport_ctx(AVFormatContext *s, RTSPStream *rtsp_st);
589 extern const AVOption ff_rtsp_options[];
591 #endif /* AVFORMAT_RTSP_H */