1 -- The theme is what decides what's actually shown on screen, what kind of
2 -- transitions are available (if any), and what kind of inputs there are,
3 -- if any. In general, it drives the entire display logic by creating Movit
4 -- chains (called “scenes”), setting their parameters and then deciding which
7 -- Themes are written in Lua, which reflects a simplified form of the Movit API
8 -- where all the low-level details (such as texture formats) and alternatives
9 -- (e.g. turning scaling on or off) are handled by the C++ side and you
10 -- generally just build scenes.
13 transition_start = -2.0,
14 transition_end = -1.0,
16 transition_src_signal = 0,
17 transition_dst_signal = 0,
20 {0.5, 0.5, 0.5}, -- Input 0.
21 {0.5, 0.5, 0.5} -- Input 1.
25 preview_signal_num = 1
28 -- Valid values for live_signal_num and preview_signal_num.
29 local INPUT0_SIGNAL_NUM = 0
30 local INPUT1_SIGNAL_NUM = 1
31 local SBS_SIGNAL_NUM = 2
32 local STATIC_SIGNAL_NUM = 3
34 -- Valid values for transition_type. (Cuts are done directly, so they need no entry.)
35 local NO_TRANSITION = 0
36 local ZOOM_TRANSITION = 1 -- Also for slides.
37 local FADE_TRANSITION = 2
39 function make_sbs_input(scene)
41 input = scene:add_input(),
42 resample_effect = scene:add_effect({ResampleEffect.new(), ResizeEffect.new()}),
43 wb_effect = scene:add_effect(WhiteBalanceEffect.new()),
44 padding_effect = scene:add_effect(IntegralPaddingEffect.new())
48 -- The main live scene.
49 function make_sbs_scene()
50 local scene = Scene.new(16, 9)
52 local input0 = make_sbs_input(scene)
53 input0.input:display(0)
54 input0.padding_effect:set_vec4("border_color", 0.0, 0.0, 0.0, 1.0)
56 local input1 = make_sbs_input(scene)
57 input1.input:display(1)
58 input1.padding_effect:set_vec4("border_color", 0.0, 0.0, 0.0, 0.0)
60 scene:add_effect(OverlayEffect.new(), input0.padding_effect, input1.padding_effect)
69 local sbs_scene = make_sbs_scene()
71 function make_fade_input(scene)
73 input = scene:add_input(),
74 resample_effect = scene:add_optional_effect(ResampleEffect.new()), -- Activated if scaling.
75 wb_effect = scene:add_optional_effect(WhiteBalanceEffect.new()) -- Activated for video inputs.
79 -- A scene to fade between two inputs, of which either can be a picture
80 -- or a live input. Only used live.
81 function make_fade_scene()
82 local scene = Scene.new(16, 9)
83 local input0 = make_fade_input(scene)
84 local input1 = make_fade_input(scene)
85 local mix_effect = scene:add_effect(MixEffect.new(), input0.wb_effect, input1.wb_effect)
86 scene:finalize(true) -- Only used live.
92 mix_effect = mix_effect
95 local fade_scene = make_fade_scene()
97 -- A scene to show a single input on screen.
98 local scene = Scene.new(16, 9)
99 local simple_scene = {
101 input = scene:add_input(),
102 resample_effect = scene:add_effect({ResampleEffect.new(), ResizeEffect.new(), IdentityEffect.new()}),
103 wb_effect = scene:add_effect(WhiteBalanceEffect.new())
107 -- A scene to show a single static picture on screen.
108 local static_image = ImageInput.new("bg.jpeg") -- Also used as input to other scenes.
109 local static_scene = Scene.new(16, 9)
110 static_scene:add_input(static_image) -- Note: Locks this input to images only.
111 static_scene:finalize()
113 -- Set some global state. Unless marked otherwise, these can only be set once,
114 -- at the start of the program.
115 Nageru.set_num_channels(4)
117 -- Sets, for each channel, which signal it corresponds to (starting from 0).
118 -- The information is used for whether right-click on the channel should bring up
119 -- an input selector or not. Only call this for channels that actually correspond
120 -- directly to a signal (ie., live inputs, not live (0) or preview (1)).
121 Nageru.set_channel_signal(2, 0)
122 Nageru.set_channel_signal(3, 1)
124 -- Set whether a given channel supports setting white balance. (Default is false.)
125 Nageru.set_supports_wb(2, true)
126 Nageru.set_supports_wb(3, true)
128 -- These can be set at any time.
129 Nageru.set_channel_name(SBS_SIGNAL_NUM + 2, "Side-by-side")
130 Nageru.set_channel_name(STATIC_SIGNAL_NUM + 2, "Static picture")
133 -- Called every frame. Returns the color (if any) to paint around the given
134 -- channel. Returns a CSS color (typically to mark live and preview signals);
135 -- "transparent" is allowed.
136 -- Will never be called for live (0) or preview (1).
137 function channel_color(channel)
138 if state.transition_type ~= NO_TRANSITION then
139 if channel_involved_in(channel, state.transition_src_signal) or
140 channel_involved_in(channel, state.transition_dst_signal) then
144 if channel_involved_in(channel, state.live_signal_num) then
148 if channel_involved_in(channel, state.preview_signal_num) then
154 function is_plain_signal(num)
155 return num == INPUT0_SIGNAL_NUM or num == INPUT1_SIGNAL_NUM
158 function channel_involved_in(channel, signal_num)
159 if is_plain_signal(signal_num) then
160 return channel == (signal_num + 2)
162 if signal_num == SBS_SIGNAL_NUM then
163 return (channel == 2 or channel == 3)
165 if signal_num == STATIC_SIGNAL_NUM then
166 return (channel == 5)
172 -- Gets called with a new gray point when the white balance is changing.
173 -- The color is in linear light (not sRGB gamma).
174 function set_wb(channel, red, green, blue)
175 if is_plain_signal(channel - 2) then
176 state.neutral_colors[channel - 2 + 1] = { red, green, blue }
180 function finish_transitions(t)
181 if state.transition_type ~= NO_TRANSITION and t >= state.transition_end then
182 state.live_signal_num = state.transition_dst_signal
183 state.transition_type = NO_TRANSITION
187 function in_transition(t)
188 return t >= state.transition_start and t <= state.transition_end
192 -- Called every frame.
193 function get_transitions(t)
194 if in_transition(t) then
195 -- Transition already in progress, the only thing we can do is really
196 -- cut to the preview. (TODO: Make an “abort” and/or “finish”, too?)
200 finish_transitions(t)
202 if state.live_signal_num == state.preview_signal_num then
203 -- No transitions possible.
207 if (is_plain_signal(state.live_signal_num) or state.live_signal_num == STATIC_SIGNAL_NUM) and
208 (is_plain_signal(state.preview_signal_num) or state.preview_signal_num == STATIC_SIGNAL_NUM) then
209 return {"Cut", "", "Fade"}
213 if state.live_signal_num == SBS_SIGNAL_NUM and is_plain_signal(state.preview_signal_num) then
214 return {"Cut", "Zoom in"}
215 elseif is_plain_signal(state.live_signal_num) and state.preview_signal_num == SBS_SIGNAL_NUM then
216 return {"Cut", "Zoom out"}
222 function swap_preview_live()
223 local temp = state.live_signal_num
224 state.live_signal_num = state.preview_signal_num
225 state.preview_signal_num = temp
228 function start_transition(type_, t, duration)
229 state.transition_start = t
230 state.transition_end = t + duration
231 state.transition_type = type_
232 state.transition_src_signal = state.live_signal_num
233 state.transition_dst_signal = state.preview_signal_num
238 -- Called when the user clicks a transition button.
239 function transition_clicked(num, t)
242 if in_transition(t) then
243 -- Ongoing transition; finish it immediately before the cut.
244 finish_transitions(state.transition_end)
250 finish_transitions(t)
252 if state.live_signal_num == state.preview_signal_num then
257 if is_plain_signal(state.live_signal_num) and is_plain_signal(state.preview_signal_num) then
258 -- We can't zoom between these. Just make a cut.
259 io.write("Cutting from " .. state.live_signal_num .. " to " .. state.live_signal_num .. "\n")
264 if (state.live_signal_num == SBS_SIGNAL_NUM and is_plain_signal(state.preview_signal_num)) or
265 (state.preview_signal_num == SBS_SIGNAL_NUM and is_plain_signal(state.live_signal_num)) then
266 start_transition(ZOOM_TRANSITION, t, 1.0)
269 finish_transitions(t)
272 if (state.live_signal_num ~= state.preview_signal_num) and
273 (is_plain_signal(state.live_signal_num) or
274 state.live_signal_num == STATIC_SIGNAL_NUM) and
275 (is_plain_signal(state.preview_signal_num) or
276 state.preview_signal_num == STATIC_SIGNAL_NUM) then
277 start_transition(FADE_TRANSITION, t, 1.0)
279 -- Fades involving SBS are ignored (we have no scene for it).
285 function channel_clicked(num)
286 state.preview_signal_num = num
289 function setup_fade_input(state, input, signals, signal_num, width, height)
290 if signal_num == STATIC_SIGNAL_NUM then
291 input.input:display(static_image)
292 input.wb_effect:disable()
294 -- We assume this is already correctly scaled at load time.
295 input.resample_effect:disable()
297 input.input:display(signal_num)
298 input.wb_effect:enable()
299 set_neutral_color(input.wb_effect, state.neutral_colors[signal_num - INPUT0_SIGNAL_NUM + 1])
301 if (signals:get_width(signal_num) ~= width or signals:get_height(signal_num) ~= height) then
302 input.resample_effect:enable()
303 input.resample_effect:set_int("width", width)
304 input.resample_effect:set_int("height", height)
306 input.resample_effect:disable()
311 function needs_scale(signals, signal_num, width, height)
312 if signal_num == STATIC_SIGNAL_NUM then
313 -- We assume this is already correctly scaled at load time.
316 assert(is_plain_signal(signal_num))
317 return (signals:get_width(signal_num) ~= width or signals:get_height(signal_num) ~= height)
320 function setup_simple_input(state, signals, signal_num, width, height, hq)
321 simple_scene.input:display(signal_num)
322 if needs_scale(signals, signal_num, width, height) then
324 simple_scene.resample_effect:choose(ResampleEffect) -- High-quality resampling.
326 simple_scene.resample_effect:choose(ResizeEffect) -- Low-quality resampling.
328 simple_scene.resample_effect:set_int("width", width)
329 simple_scene.resample_effect:set_int("height", height)
331 simple_scene.resample_effect:disable() -- No scaling.
333 set_neutral_color_from_signal(state, simple_scene.wb_effect, signal_num)
337 -- Called every frame. Get the scene for displaying at input <num>,
338 -- where 0 is live, 1 is preview, 2 is the first channel to display
339 -- in the bottom bar, and so on up to num_channels()+1. t is the
340 -- current time in seconds. width and height are the dimensions of
341 -- the output, although you can ignore them if you don't need them
342 -- (they're useful if you want to e.g. know what to resample by).
344 -- <signals> is basically an exposed InputState, which you can use to
345 -- query for information about the signals at the point of the current
346 -- frame. In particular, you can call get_frame_width() and get_frame_height()
347 -- for any signal number, and use that to e.g. assist in scene selection.
348 -- (You can also use get_width() and get_height(), which return the
349 -- _field_ size. This has half the height for interlaced signals.)
351 -- You should return scene to use, after having set any parameters you
352 -- want to set (through set_int() etc.). The parameters will be snapshot
353 -- at return time and used during rendering.
354 function get_scene(num, t, width, height, signals)
355 local input_resolution = {}
356 for signal_num=0,1 do
358 width = signals:get_frame_width(signal_num),
359 height = signals:get_frame_height(signal_num),
361 input_resolution[signal_num] = res
363 local text_res = signals:get_human_readable_resolution(signal_num)
364 Nageru.set_channel_name(signal_num + 2, "Input " .. (signal_num + 1) .. " (" .. text_res .. ")")
367 if num == 0 then -- Live.
368 finish_transitions(t)
369 if state.transition_type == ZOOM_TRANSITION then
370 -- Transition in or out of SBS.
371 prepare_sbs_scene(state, calc_zoom_progress(state, t), state.transition_type, state.transition_src_signal, state.transition_dst_signal, width, height, input_resolution, true)
372 return sbs_scene.scene
373 elseif state.transition_type == NO_TRANSITION and state.live_signal_num == SBS_SIGNAL_NUM then
375 prepare_sbs_scene(state, 0.0, NO_TRANSITION, 0, SBS_SIGNAL_NUM, width, height, input_resolution, true)
376 return sbs_scene.scene
377 elseif state.transition_type == FADE_TRANSITION then
378 setup_fade_input(state, fade_scene.input0, signals, state.transition_src_signal, width, height)
379 setup_fade_input(state, fade_scene.input1, signals, state.transition_dst_signal, width, height)
381 local tt = calc_fade_progress(t, state.transition_start, state.transition_end)
382 fade_scene.mix_effect:set_float("strength_first", 1.0 - tt)
383 fade_scene.mix_effect:set_float("strength_second", tt)
385 return fade_scene.scene
386 elseif is_plain_signal(state.live_signal_num) then
387 setup_simple_input(state, signals, state.live_signal_num, width, height, true)
388 return simple_scene.scene
389 elseif state.live_signal_num == STATIC_SIGNAL_NUM then -- Static picture.
395 if num == 1 then -- Preview.
396 num = state.preview_signal_num + 2
399 -- Individual preview inputs.
400 if is_plain_signal(num - 2) then
401 setup_simple_input(state, signals, num - 2, width, height, false)
402 return simple_scene.scene
404 if num == SBS_SIGNAL_NUM + 2 then
405 prepare_sbs_scene(state, 0.0, NO_TRANSITION, 0, SBS_SIGNAL_NUM, width, height, input_resolution, false)
406 return sbs_scene.scene
408 if num == STATIC_SIGNAL_NUM + 2 then
413 function place_rectangle(input, x0, y0, x1, y1, screen_width, screen_height, input_width, input_height, hq)
414 input.padding_effect:set_int("width", screen_width)
415 input.padding_effect:set_int("height", screen_height)
418 if x0 > screen_width or x1 < 0.0 or y0 > screen_height or y1 < 0.0 then
419 input.resample_effect:choose(ResizeEffect) -- Low-quality resizing.
420 input.resample_effect:set_int("width", 1)
421 input.resample_effect:set_int("height", 1)
422 input.padding_effect:set_int("left", screen_width + 100)
423 input.padding_effect:set_int("top", screen_height + 100)
434 srcx0 = -x0 / (x1 - x0)
438 srcy0 = -y0 / (y1 - y0)
441 if x1 > screen_width then
442 srcx1 = (screen_width - x0) / (x1 - x0)
445 if y1 > screen_height then
446 srcy1 = (screen_height - y0) / (y1 - y0)
451 -- High-quality resampling. Go for the actual effect (returned by choose())
452 -- since we want to set zoom_*, which will give an error if set on ResizeEffect.
453 local resample_effect = input.resample_effect:choose(ResampleEffect)
455 local x_subpixel_offset = x0 - math.floor(x0)
456 local y_subpixel_offset = y0 - math.floor(y0)
458 -- Resampling must be to an integral number of pixels. Round up,
459 -- and then add an extra pixel so we have some leeway for the border.
460 local width = math.ceil(x1 - x0) + 1
461 local height = math.ceil(y1 - y0) + 1
462 resample_effect:set_int("width", width)
463 resample_effect:set_int("height", height)
465 -- Correct the discrepancy with zoom. (This will leave a small
466 -- excess edge of pixels and subpixels, which we'll correct for soon.)
467 local zoom_x = (x1 - x0) / (width * (srcx1 - srcx0))
468 local zoom_y = (y1 - y0) / (height * (srcy1 - srcy0))
469 resample_effect:set_float("zoom_x", zoom_x)
470 resample_effect:set_float("zoom_y", zoom_y)
471 resample_effect:set_float("zoom_center_x", 0.0)
472 resample_effect:set_float("zoom_center_y", 0.0)
474 -- Padding must also be to a whole-pixel offset.
475 input.padding_effect:set_int("left", math.floor(x0))
476 input.padding_effect:set_int("top", math.floor(y0))
478 -- Correct _that_ discrepancy by subpixel offset in the resampling.
479 resample_effect:set_float("left", srcx0 * input_width - x_subpixel_offset / zoom_x)
480 resample_effect:set_float("top", srcy0 * input_height - y_subpixel_offset / zoom_y)
482 -- Finally, adjust the border so it is exactly where we want it.
483 input.padding_effect:set_float("border_offset_left", x_subpixel_offset)
484 input.padding_effect:set_float("border_offset_right", x1 - (math.floor(x0) + width))
485 input.padding_effect:set_float("border_offset_top", y_subpixel_offset)
486 input.padding_effect:set_float("border_offset_bottom", y1 - (math.floor(y0) + height))
488 -- Lower-quality simple resizing.
489 input.resample_effect:choose(ResizeEffect)
491 local width = round(x1 - x0)
492 local height = round(y1 - y0)
493 input.resample_effect:set_int("width", width)
494 input.resample_effect:set_int("height", height)
496 -- Padding must also be to a whole-pixel offset.
497 input.padding_effect:set_int("left", math.floor(x0))
498 input.padding_effect:set_int("top", math.floor(y0))
500 -- No subpixel stuff.
501 input.padding_effect:set_float("border_offset_left", 0.0)
502 input.padding_effect:set_float("border_offset_right", 0.0)
503 input.padding_effect:set_float("border_offset_top", 0.0)
504 input.padding_effect:set_float("border_offset_bottom", 0.0)
508 -- This is broken, of course (even for positive numbers), but Lua doesn't give us access to real rounding.
510 return math.floor(x + 0.5)
513 function lerp(a, b, t)
514 return a + (b - a) * t
517 function lerp_pos(a, b, t)
519 x0 = lerp(a.x0, b.x0, t),
520 y0 = lerp(a.y0, b.y0, t),
521 x1 = lerp(a.x1, b.x1, t),
522 y1 = lerp(a.y1, b.y1, t)
526 function pos_from_top_left(x, y, width, height, screen_width, screen_height)
527 local xs = screen_width / 1280.0
528 local ys = screen_height / 720.0
532 x1 = round(xs * (x + width)),
533 y1 = round(ys * (y + height))
537 function prepare_sbs_scene(state, t, transition_type, src_signal, dst_signal, screen_width, screen_height, input_resolution, hq)
538 set_neutral_color(sbs_scene.input0.wb_effect, state.neutral_colors[1])
539 set_neutral_color(sbs_scene.input1.wb_effect, state.neutral_colors[2])
541 -- First input is positioned (16,48) from top-left.
542 -- Second input is positioned (16,48) from the bottom-right.
543 local pos0 = pos_from_top_left(16, 48, 848, 477, screen_width, screen_height)
544 local pos1 = pos_from_top_left(1280 - 384 - 16, 720 - 216 - 48, 384, 216, screen_width, screen_height)
546 local pos_fs = { x0 = 0, y0 = 0, x1 = screen_width, y1 = screen_height }
548 if transition_type == NO_TRANSITION then
550 affine_param = { sx = 1.0, sy = 1.0, tx = 0.0, ty = 0.0 } -- Identity.
552 -- Zooming to/from SBS view into or out of a single view.
553 assert(transition_type == ZOOM_TRANSITION)
555 if src_signal == SBS_SIGNAL_NUM then
559 assert(dst_signal == SBS_SIGNAL_NUM)
564 if signal == INPUT0_SIGNAL_NUM then
565 affine_param = find_affine_param(pos0, lerp_pos(pos0, pos_fs, real_t))
566 elseif signal == INPUT1_SIGNAL_NUM then
567 affine_param = find_affine_param(pos1, lerp_pos(pos1, pos_fs, real_t))
571 -- NOTE: input_resolution is not 1-indexed, unlike usual Lua arrays.
572 place_rectangle_with_affine(sbs_scene.input0, pos0, affine_param, screen_width, screen_height, input_resolution[0].width, input_resolution[0].height, hq)
573 place_rectangle_with_affine(sbs_scene.input1, pos1, affine_param, screen_width, screen_height, input_resolution[1].width, input_resolution[1].height, hq)
576 -- Find the transformation that changes the first rectangle to the second one.
577 function find_affine_param(a, b)
578 local sx = (b.x1 - b.x0) / (a.x1 - a.x0)
579 local sy = (b.y1 - b.y0) / (a.y1 - a.y0)
583 tx = b.x0 - a.x0 * sx,
584 ty = b.y0 - a.y0 * sy
588 function place_rectangle_with_affine(input, pos, aff, screen_width, screen_height, input_width, input_height, hq)
589 local x0 = pos.x0 * aff.sx + aff.tx
590 local x1 = pos.x1 * aff.sx + aff.tx
591 local y0 = pos.y0 * aff.sy + aff.ty
592 local y1 = pos.y1 * aff.sy + aff.ty
594 place_rectangle(input, x0, y0, x1, y1, screen_width, screen_height, input_width, input_height, hq)
597 function set_neutral_color(effect, color)
598 effect:set_vec3("neutral_color", color[1], color[2], color[3])
601 function set_neutral_color_from_signal(state, effect, signal)
602 if is_plain_signal(signal) then
603 set_neutral_color(effect, state.neutral_colors[signal - INPUT0_SIGNAL_NUM + 1])
607 function calc_zoom_progress(state, t)
608 if t < state.transition_start then
610 elseif t > state.transition_end then
613 local tt = (t - state.transition_start) / (state.transition_end - state.transition_start)
615 return math.sin(tt * 3.14159265358 * 0.5)
619 function calc_fade_progress(t, transition_start, transition_end)
620 local tt = (t - transition_start) / (transition_end - transition_start)
627 -- Make the fade look maybe a tad more natural, by pumping it
628 -- through a sigmoid function.
630 tt = 1.0 / (1.0 + math.exp(-tt))