1 #ifndef SANA2_SANA2DEVICE_H
2 #define SANA2_SANA2DEVICE_H 1
4 ** $Filename: devices/sana2.h $
6 ** $Date: 1994/10/03 20:55:10 $
8 ** Structure definitions for SANA-II devices.
10 ** (C) Copyright 1991 Commodore-Amiga Inc.
11 ** All Rights Reserved
16 #include <exec/types.h>
20 #include <exec/ports.h>
28 #include <exec/errors.h>
31 #ifndef DEVICES_TIMER_H
32 #include <devices/timer.h>
35 #ifndef UTILITY_TAGITEM_H
36 #include <utility/tagitem.h>
40 #define SANA2_MAX_ADDR_BITS (128)
41 #define SANA2_MAX_ADDR_BYTES ((SANA2_MAX_ADDR_BITS+7)/8)
45 struct IORequest ios2_Req;
46 ULONG ios2_WireError; /* wire type specific error */
47 ULONG ios2_PacketType; /* packet type */
48 UBYTE ios2_SrcAddr[SANA2_MAX_ADDR_BYTES]; /* source addr */
49 UBYTE ios2_DstAddr[SANA2_MAX_ADDR_BYTES]; /* dest address */
50 ULONG ios2_DataLength; /* length of packet data */
51 VOID *ios2_Data; /* packet data */
52 VOID *ios2_StatData; /* statistics data pointer */
53 VOID *ios2_BufferManagement; /* see SANA-II OpenDevice adoc */
58 ** defines for the io_Flags field
60 #define SANA2IOB_RAW (7) /* raw packet IO requested */
61 #define SANA2IOF_RAW (1<<SANA2IOB_RAW)
63 #define SANA2IOB_BCAST (6) /* broadcast packet (received) */
64 #define SANA2IOF_BCAST (1<<SANA2IOB_BCAST)
66 #define SANA2IOB_MCAST (5) /* multicast packet (received) */
67 #define SANA2IOF_MCAST (1<<SANA2IOB_MCAST)
69 #define SANA2IOB_QUICK (IOB_QUICK) /* quick IO requested (0) */
70 #define SANA2IOF_QUICK (IOF_QUICK)
74 ** defines for OpenDevice() flags
76 #define SANA2OPB_MINE (0) /* exclusive access requested */
77 #define SANA2OPF_MINE (1<<SANA2OPB_MINE)
79 #define SANA2OPB_PROM (1) /* promiscuous mode requested */
80 #define SANA2OPF_PROM (1<<SANA2OPB_PROM)
84 ** defines for OpenDevice() tags
86 #define S2_Dummy (TAG_USER + 0xB0000)
88 #define S2_CopyToBuff (S2_Dummy + 1)
89 #define S2_CopyFromBuff (S2_Dummy + 2)
90 #define S2_PacketFilter (S2_Dummy + 3)
92 struct Sana2DeviceQuery
95 ** Standard information
97 ULONG SizeAvailable; /* bytes available */
98 ULONG SizeSupplied; /* bytes supplied */
99 ULONG DevQueryFormat; /* this is type 0 */
100 ULONG DeviceLevel; /* this document is level 0 */
102 ** Common information
104 UWORD AddrFieldSize; /* address size in bits */
105 ULONG MTU; /* maximum packet data size */
106 ULONG BPS; /* line rate (bits/sec) */
107 ULONG HardwareType; /* what the wire is */
109 ** Format specific information
115 ** defined Hardware types
117 ** If your hardware type isn't listed below contact CATS to get a new
118 ** type number added for your hardware.
120 #define S2WireType_Ethernet 1
121 #define S2WireType_IEEE802 6
122 #define S2WireType_Arcnet 7
123 #define S2WireType_LocalTalk 11
124 #define S2WireType_DyLAN 12
126 #define S2WireType_AmokNet 200 /* Amiga Floppy Port hardware */
128 #define S2WireType_Liana 202 /* Villate Tronic parallel port hw */
130 #define S2WireType_PPP 253
131 #define S2WireType_SLIP 254
132 #define S2WireType_CSLIP 255 /* Compressed SLIP */
134 #define S2WireType_PLIP 420 /* SLIP over a parallel port */
136 struct Sana2PacketTypeStats
138 ULONG PacketsSent; /* transmitted count */
139 ULONG PacketsReceived; /* received count */
140 ULONG BytesSent; /* bytes transmitted count */
141 ULONG BytesReceived; /* bytes received count */
142 ULONG PacketsDropped; /* packets dropped count */
146 struct Sana2SpecialStatRecord
148 ULONG Type; /* statistic identifier */
149 ULONG Count; /* the statistic */
150 char *String; /* statistic name */
154 struct Sana2SpecialStatHeader
156 ULONG RecordCountMax; /* room available */
157 ULONG RecordCountSupplied; /* number supplied */
158 /* struct Sana2SpecialStatRecord[RecordCountMax]; */
162 struct Sana2DeviceStats
164 ULONG PacketsReceived; /* received count */
165 ULONG PacketsSent; /* transmitted count */
166 ULONG BadData; /* bad packets received */
167 ULONG Overruns; /* hardware miss count */
168 ULONG Unused; /* Unused field */
169 ULONG UnknownTypesReceived; /* orphan count */
170 ULONG Reconfigurations; /* network reconfigurations */
171 struct timeval LastStart; /* time of last online */
178 #define S2_START (CMD_NONSTD)
180 #define S2_DEVICEQUERY (S2_START+ 0)
181 #define S2_GETSTATIONADDRESS (S2_START+ 1)
182 #define S2_CONFIGINTERFACE (S2_START+ 2)
183 #define S2_ADDMULTICASTADDRESS (S2_START+ 5)
184 #define S2_DELMULTICASTADDRESS (S2_START+ 6)
185 #define S2_MULTICAST (S2_START+ 7)
186 #define S2_BROADCAST (S2_START+ 8)
187 #define S2_TRACKTYPE (S2_START+ 9)
188 #define S2_UNTRACKTYPE (S2_START+10)
189 #define S2_GETTYPESTATS (S2_START+11)
190 #define S2_GETSPECIALSTATS (S2_START+12)
191 #define S2_GETGLOBALSTATS (S2_START+13)
192 #define S2_ONEVENT (S2_START+14)
193 #define S2_READORPHAN (S2_START+15)
194 #define S2_ONLINE (S2_START+16)
195 #define S2_OFFLINE (S2_START+17)
197 #define S2_END (S2_START+18)
201 ** defined errors for io_Error (see also <exec/errors.h>)
203 #define S2ERR_NO_ERROR 0 /* peachy-keen */
204 #define S2ERR_NO_RESOURCES 1 /* resource allocation failure */
205 #define S2ERR_BAD_ARGUMENT 3 /* garbage somewhere */
206 #define S2ERR_BAD_STATE 4 /* inappropriate state */
207 #define S2ERR_BAD_ADDRESS 5 /* who? */
208 #define S2ERR_MTU_EXCEEDED 6 /* too much to chew */
209 #define S2ERR_NOT_SUPPORTED 8 /* hardware can't support cmd */
210 #define S2ERR_SOFTWARE 9 /* software error detected */
211 #define S2ERR_OUTOFSERVICE 10 /* driver is OFFLINE */
212 #define S2ERR_TX_FAILURE 11 /* Transmission attempt failed */
214 ** From <exec/errors.h>
216 ** IOERR_OPENFAIL (-1) * device/unit failed to open *
217 ** IOERR_ABORTED (-2) * request terminated early [after AbortIO()] *
218 ** IOERR_NOCMD (-3) * command not supported by device *
219 ** IOERR_BADLENGTH (-4) * not a valid length (usually IO_LENGTH) *
220 ** IOERR_BADADDRESS (-5) * invalid address (misaligned or bad range) *
221 ** IOERR_UNITBUSY (-6) * device opens ok, but requested unit is busy *
222 ** IOERR_SELFTEST (-7) * hardware failed self-test *
226 ** defined errors for ios2_WireError
228 #define S2WERR_GENERIC_ERROR 0 /* no specific info available */
229 #define S2WERR_NOT_CONFIGURED 1 /* unit not configured */
230 #define S2WERR_UNIT_ONLINE 2 /* unit is currently online */
231 #define S2WERR_UNIT_OFFLINE 3 /* unit is currently offline */
232 #define S2WERR_ALREADY_TRACKED 4 /* protocol already tracked */
233 #define S2WERR_NOT_TRACKED 5 /* protocol not tracked */
234 #define S2WERR_BUFF_ERROR 6 /* buff mgt func returned error */
235 #define S2WERR_SRC_ADDRESS 7 /* source address problem */
236 #define S2WERR_DST_ADDRESS 8 /* destination address problem */
237 #define S2WERR_BAD_BROADCAST 9 /* broadcast address problem */
238 #define S2WERR_BAD_MULTICAST 10 /* multicast address problem */
239 #define S2WERR_MULTICAST_FULL 11 /* multicast address list full */
240 #define S2WERR_BAD_EVENT 12 /* unsupported event class */
241 #define S2WERR_BAD_STATDATA 13 /* statdata failed sanity check */
242 #define S2WERR_IS_CONFIGURED 15 /* attempt to config twice */
243 #define S2WERR_NULL_POINTER 16 /* null pointer detected */
244 #define S2WERR_TOO_MANY_RETIRES 17 /* tx failed - too many retries */
245 #define S2WERR_RCVREL_HDW_ERR 18 /* Driver fixable HW error */
251 #define S2EVENT_ERROR (1L<<0) /* error catch all */
252 #define S2EVENT_TX (1L<<1) /* transmitter error catch all */
253 #define S2EVENT_RX (1L<<2) /* receiver error catch all */
254 #define S2EVENT_ONLINE (1L<<3) /* unit is in service */
255 #define S2EVENT_OFFLINE (1L<<4) /* unit is not in service */
256 #define S2EVENT_BUFF (1L<<5) /* buff mgt function error */
257 #define S2EVENT_HARDWARE (1L<<6) /* hardware error catch all */
258 #define S2EVENT_SOFTWARE (1L<<7) /* software error catch all */
261 #endif /* SANA2_SANA2DEVICE_H */