1 # Stockfish, a UCI chess playing engine derived from Glaurung 2.1
2 # Copyright (C) 2004-2008 Tord Romstad (Glaurung author)
3 # Copyright (C) 2008-2015 Marco Costalba, Joona Kiiski, Tord Romstad
4 # Copyright (C) 2015-2016 Marco Costalba, Joona Kiiski, Gary Linscott, Tord Romstad
6 # Stockfish is free software: you can redistribute it and/or modify
7 # it under the terms of the GNU General Public License as published by
8 # the Free Software Foundation, either version 3 of the License, or
9 # (at your option) any later version.
11 # Stockfish is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY; without even the implied warranty of
13 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 # GNU General Public License for more details.
16 # You should have received a copy of the GNU General Public License
17 # along with this program. If not, see <http://www.gnu.org/licenses/>.
20 ### ==========================================================================
21 ### Section 1. General Configuration
22 ### ==========================================================================
24 ### Establish the operating system name
25 UNAME = $(shell uname)
30 ### Installation dir definitions
32 BINDIR = $(PREFIX)/bin
34 ### Built-in benchmark for pgo-builds
35 PGOBENCH = ./$(EXE) bench 16 1 1000 default time
38 OBJS = benchmark.o bitbase.o bitboard.o endgame.o evaluate.o main.o \
39 material.o misc.o movegen.o movepick.o pawns.o position.o psqt.o \
40 search.o thread.o timeman.o tt.o uci.o ucioption.o syzygy/tbprobe.o
42 ### ==========================================================================
43 ### Section 2. High-level Configuration
44 ### ==========================================================================
46 # flag --- Comp switch --- Description
47 # ----------------------------------------------------------------------------
49 # debug = yes/no --- -DNDEBUG --- Enable/Disable debug mode
50 # optimize = yes/no --- (-O3/-fast etc.) --- Enable/Disable optimizations
51 # arch = (name) --- (-arch) --- Target architecture
52 # bits = 64/32 --- -DIS_64BIT --- 64-/32-bit operating system
53 # prefetch = yes/no --- -DUSE_PREFETCH --- Use prefetch x86 asm-instruction
54 # bsfq = yes/no --- -DUSE_BSFQ --- Use bsfq x86_64 asm-instruction (only
55 # with GCC and ICC 64-bit)
56 # popcnt = yes/no --- -DUSE_POPCNT --- Use popcnt x86_64 asm-instruction
57 # sse = yes/no --- -msse --- Use Intel Streaming SIMD Extensions
58 # pext = yes/no --- -DUSE_PEXT --- Use pext x86_64 asm-instruction
60 # Note that Makefile is space sensitive, so when adding new architectures
61 # or modifying existing flags, you have to make sure there are no extra spaces
62 # at the end of the line for flag values.
64 ### 2.1. General and architecture defaults
74 ### 2.2 Architecture specific
76 ifeq ($(ARCH),general-32)
80 ifeq ($(ARCH),x86-32-old)
90 ifeq ($(ARCH),general-64)
103 ifeq ($(ARCH),x86-64-modern)
112 ifeq ($(ARCH),x86-64-bmi2)
128 ifeq ($(ARCH),ppc-32)
132 ifeq ($(ARCH),ppc-64)
138 ### ==========================================================================
139 ### Section 3. Low-level configuration
140 ### ==========================================================================
142 ### 3.1 Selecting compiler (default = gcc)
144 CXXFLAGS += -Wall -Wcast-qual -fno-exceptions -fno-rtti -std=c++11 $(EXTRACXXFLAGS)
145 DEPENDFLAGS += -std=c++11
146 LDFLAGS += $(EXTRALDFLAGS)
155 CXXFLAGS += -pedantic -Wextra -Wshadow
156 ifneq ($(UNAME),Darwin)
157 LDFLAGS += -Wl,--no-as-needed
164 ifeq ($(UNAME),Linux)
166 ifeq ($(shell which x86_64-w64-mingw32-c++-posix),)
167 CXX=x86_64-w64-mingw32-c++
169 CXX=x86_64-w64-mingw32-c++-posix
172 ifeq ($(shell which i686-w64-mingw32-c++-posix),)
173 CXX=i686-w64-mingw32-c++
175 CXX=i686-w64-mingw32-c++-posix
182 CXXFLAGS += -Wextra -Wshadow
189 CXXFLAGS += -diag-disable 1476,10120 -Wcheck -Wabi -Wdeprecated -strict-ansi
195 CXXFLAGS += -pedantic -Wextra -Wshadow
196 ifeq ($(UNAME),Darwin)
197 CXXFLAGS += -stdlib=libc++
198 DEPENDFLAGS += -stdlib=libc++
203 profile_prepare = icc-profile-prepare
204 profile_make = icc-profile-make
205 profile_use = icc-profile-use
206 profile_clean = icc-profile-clean
208 profile_prepare = gcc-profile-prepare
209 profile_make = gcc-profile-make
210 profile_use = gcc-profile-use
211 profile_clean = gcc-profile-clean
214 ifeq ($(UNAME),Darwin)
215 CXXFLAGS += -arch $(arch) -mmacosx-version-min=10.9
216 LDFLAGS += -arch $(arch) -mmacosx-version-min=10.9
219 ### Travis CI script uses COMPILER to overwrite CXX
224 ### Allow overwriting CXX from command line
229 ### On mingw use Windows threads, otherwise POSIX
230 ifneq ($(comp),mingw)
231 # On Android Bionic's C library comes with its own pthread implementation bundled in
232 ifneq ($(arch),armv7)
233 # Haiku has pthreads in its libroot, so only link it in on other platforms
234 ifneq ($(UNAME),Haiku)
248 ifeq ($(optimize),yes)
253 ifeq ($(UNAME),Darwin)
255 CXXFLAGS += -mdynamic-no-pic
257 ifeq ($(arch),x86_64)
258 CXXFLAGS += -mdynamic-no-pic
263 CXXFLAGS += -fno-gcse -mthumb -march=armv7-a -mfloat-abi=softfp
272 ifeq ($(UNAME),Darwin)
273 CXXFLAGS += -fast -mdynamic-no-pic
282 ifeq ($(UNAME),Darwin)
285 LDFLAGS += $(CXXFLAGS)
288 CXXFLAGS += -mdynamic-no-pic
290 ifeq ($(arch),x86_64)
291 CXXFLAGS += -mdynamic-no-pic
299 CXXFLAGS += -DIS_64BIT
303 ifeq ($(prefetch),yes)
309 CXXFLAGS += -DNO_PREFETCH
314 CXXFLAGS += -DUSE_BSFQ
320 CXXFLAGS += -msse3 -DUSE_POPCNT
322 CXXFLAGS += -msse3 -mpopcnt -DUSE_POPCNT
328 CXXFLAGS += -DUSE_PEXT
329 ifeq ($(comp),$(filter $(comp),gcc clang mingw))
330 CXXFLAGS += -mbmi -mbmi2
334 ### 3.11 Link Time Optimization, it works since gcc 4.5 but not on mingw under Windows.
335 ### This is a mix of compile and link time options because the lto link phase
336 ### needs access to the optimization flags.
338 ifeq ($(optimize),yes)
341 LDFLAGS += $(CXXFLAGS)
347 ifeq ($(UNAME),Linux)
348 ifeq ($(optimize),yes)
351 LDFLAGS += $(CXXFLAGS)
357 ### 3.12 Android 5 can only run position independent executables. Note that this
358 ### breaks Android 4.0 and earlier.
361 LDFLAGS += -fPIE -pie
365 ### ==========================================================================
366 ### Section 4. Public targets
367 ### ==========================================================================
371 @echo "To compile stockfish, type: "
373 @echo "make target ARCH=arch [COMP=compiler] [COMPCXX=cxx]"
375 @echo "Supported targets:"
377 @echo "build > Standard build"
378 @echo "profile-build > PGO build"
379 @echo "strip > Strip executable"
380 @echo "install > Install executable"
381 @echo "clean > Clean up"
383 @echo "Supported archs:"
385 @echo "x86-64 > x86 64-bit"
386 @echo "x86-64-modern > x86 64-bit with popcnt support"
387 @echo "x86-64-bmi2 > x86 64-bit with pext support"
388 @echo "x86-32 > x86 32-bit with SSE support"
389 @echo "x86-32-old > x86 32-bit fall back for old hardware"
390 @echo "ppc-64 > PPC 64-bit"
391 @echo "ppc-32 > PPC 32-bit"
392 @echo "armv7 > ARMv7 32-bit"
393 @echo "general-64 > unspecified 64-bit"
394 @echo "general-32 > unspecified 32-bit"
396 @echo "Supported compilers:"
398 @echo "gcc > Gnu compiler (default)"
399 @echo "mingw > Gnu compiler with MinGW under Windows"
400 @echo "clang > LLVM Clang compiler"
401 @echo "icc > Intel compiler"
403 @echo "Simple examples. If you don't know what to do, you likely want to run: "
405 @echo "make build ARCH=x86-64 (This is for 64-bit systems)"
406 @echo "make build ARCH=x86-32 (This is for 32-bit systems)"
408 @echo "Advanced examples, for experienced users: "
410 @echo "make build ARCH=x86-64 COMP=clang"
411 @echo "make profile-build ARCH=x86-64-modern COMP=gcc COMPCXX=g++-4.8"
415 .PHONY: build profile-build
417 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) config-sanity
418 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) all
421 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) config-sanity
423 @echo "Step 0/4. Preparing for profile build."
424 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_prepare)
426 @echo "Step 1/4. Building executable for benchmark ..."
427 @touch *.cpp *.h syzygy/*.cpp syzygy/*.h
428 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_make)
430 @echo "Step 2/4. Running benchmark for pgo-build ..."
431 $(PGOBENCH) > /dev/null
433 @echo "Step 3/4. Building final executable ..."
434 @touch *.cpp *.h syzygy/*.cpp syzygy/*.h
435 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_use)
437 @echo "Step 4/4. Deleting profile data ..."
438 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_clean)
444 -mkdir -p -m 755 $(BINDIR)
446 -strip $(BINDIR)/$(EXE)
449 $(RM) $(EXE) $(EXE).exe *.o .depend *~ core bench.txt *.gcda ./syzygy/*.o ./syzygy/*.gcda
454 ### ==========================================================================
455 ### Section 5. Private targets
456 ### ==========================================================================
463 @echo "debug: '$(debug)'"
464 @echo "optimize: '$(optimize)'"
465 @echo "arch: '$(arch)'"
466 @echo "bits: '$(bits)'"
467 @echo "prefetch: '$(prefetch)'"
468 @echo "bsfq: '$(bsfq)'"
469 @echo "popcnt: '$(popcnt)'"
470 @echo "sse: '$(sse)'"
471 @echo "pext: '$(pext)'"
475 @echo "CXXFLAGS: $(CXXFLAGS)"
476 @echo "LDFLAGS: $(LDFLAGS)"
478 @echo "Testing config sanity. If this fails, try 'make help' ..."
480 @test "$(debug)" = "yes" || test "$(debug)" = "no"
481 @test "$(optimize)" = "yes" || test "$(optimize)" = "no"
482 @test "$(arch)" = "any" || test "$(arch)" = "x86_64" || test "$(arch)" = "i386" || \
483 test "$(arch)" = "ppc64" || test "$(arch)" = "ppc" || test "$(arch)" = "armv7"
484 @test "$(bits)" = "32" || test "$(bits)" = "64"
485 @test "$(prefetch)" = "yes" || test "$(prefetch)" = "no"
486 @test "$(bsfq)" = "yes" || test "$(bsfq)" = "no"
487 @test "$(popcnt)" = "yes" || test "$(popcnt)" = "no"
488 @test "$(sse)" = "yes" || test "$(sse)" = "no"
489 @test "$(pext)" = "yes" || test "$(pext)" = "no"
490 @test "$(comp)" = "gcc" || test "$(comp)" = "icc" || test "$(comp)" = "mingw" || test "$(comp)" = "clang"
493 $(CXX) -o $@ $(OBJS) $(LDFLAGS)
496 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) gcc-profile-clean
499 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) \
500 EXTRACXXFLAGS='-fprofile-generate' \
501 EXTRALDFLAGS='-lgcov' \
505 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) \
506 EXTRACXXFLAGS='-fprofile-use -fno-peel-loops -fno-tracer' \
507 EXTRALDFLAGS='-lgcov' \
511 @rm -rf *.gcda *.gcno syzygy/*.gcda syzygy/*.gcno bench.txt
514 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) icc-profile-clean
518 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) \
519 EXTRACXXFLAGS='-prof-gen=srcpos -prof_dir ./profdir' \
523 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) \
524 EXTRACXXFLAGS='-prof_use -prof_dir ./profdir' \
528 @rm -rf profdir bench.txt
531 -@$(CXX) $(DEPENDFLAGS) -MM $(OBJS:.o=.cpp) > $@ 2> /dev/null