1 # Stockfish, a UCI chess playing engine derived from Glaurung 2.1
2 # Copyright (C) 2004-2008 Tord Romstad (Glaurung author)
3 # Copyright (C) 2008-2012 Marco Costalba, Joona Kiiski, Tord Romstad
5 # Stockfish is free software: you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation, either version 3 of the License, or
8 # (at your option) any later version.
10 # Stockfish is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
19 ### ==========================================================================
20 ### Section 1. General Configuration
21 ### ==========================================================================
26 ### Installation dir definitions
28 BINDIR = $(PREFIX)/bin
30 ### Built-in benchmark for pgo-builds
31 PGOBENCH = ./$(EXE) bench 32 1 10 default depth
34 OBJS = benchmark.o bitbase.o bitboard.o book.o endgame.o evaluate.o main.o \
35 material.o misc.o move.o movegen.o movepick.o pawns.o position.o \
36 search.o thread.o timeman.o tt.o uci.o ucioption.o
38 ### ==========================================================================
39 ### Section 2. High-level Configuration
40 ### ==========================================================================
42 # flag --- Comp switch --- Description
43 # ----------------------------------------------------------------------------
45 # debug = yes/no --- -DNDEBUG --- Enable/Disable debug mode
46 # optimize = yes/no --- (-O3/-fast etc.) --- Enable/Disable optimizations
47 # arch = (name) --- (-arch) --- Target architecture
48 # os = (name) --- --- Target operating system
49 # bits = 64/32 --- -DIS_64BIT --- 64-/32-bit operating system
50 # bigendian = yes/no --- -DBIGENDIAN --- big/little-endian byte order
51 # prefetch = yes/no --- -DUSE_PREFETCH --- Use prefetch x86 asm-instruction
52 # bsfq = yes/no --- -DUSE_BSFQ --- Use bsfq x86_64 asm-instruction (only
53 # with GCC and ICC 64-bit)
54 # popcnt = yes/no --- -DUSE_POPCNT --- Use popcnt x86_64 asm-instruction
56 # Note that Makefile is space sensitive, so when adding new architectures
57 # or modifying existing flags, you have to make sure there are no extra spaces
58 # at the end of the line for flag values.
64 ### 2.2 Architecture specific
67 ifeq ($(ARCH),general-64)
77 ifeq ($(ARCH),general-32)
87 ifeq ($(ARCH),bigendian-64)
97 ifeq ($(ARCH),bigendian-32)
108 ifeq ($(ARCH),x86-64)
118 ifeq ($(ARCH),x86-64-modern)
128 ifeq ($(ARCH),x86-32)
138 ifeq ($(ARCH),x86-32-old)
149 ifeq ($(ARCH),osx-ppc-64)
159 ifeq ($(ARCH),osx-ppc-32)
169 ifeq ($(ARCH),osx-x86-64)
179 ifeq ($(ARCH),osx-x86-32)
190 ### ==========================================================================
191 ### Section 3. Low-level configuration
192 ### ==========================================================================
194 ### 3.1 Selecting compiler (default = gcc)
202 profile_prepare = gcc-profile-prepare
203 profile_make = gcc-profile-make
204 profile_use = gcc-profile-use
205 profile_clean = gcc-profile-clean
211 profile_prepare = gcc-profile-prepare
212 profile_make = gcc-profile-make
213 profile_use = gcc-profile-use
214 profile_clean = gcc-profile-clean
220 profile_prepare = icc-profile-prepare
221 profile_make = icc-profile-make
222 profile_use = icc-profile-use
223 profile_clean = icc-profile-clean
226 ### 3.2 General compiler settings
227 CXXFLAGS = -g -Wall -Wcast-qual -fno-exceptions -fno-rtti $(EXTRACXXFLAGS)
230 CXXFLAGS += -ansi -pedantic -Wno-long-long -Wextra -Wshadow
234 CXXFLAGS += -Wextra -Wshadow
238 CXXFLAGS += -wd383,981,1418,1419,10187,10188,11505,11503 -Wcheck -Wabi -Wdeprecated -strict-ansi
242 CXXFLAGS += -arch $(arch)
245 ### 3.3 General linker settings
246 LDFLAGS = $(EXTRALDFLAGS)
248 ### On mingw use Windows threads, otherwise POSIX
249 ifneq ($(comp),mingw)
254 LDFLAGS += -arch $(arch)
263 ifeq ($(optimize),yes)
270 CXXFLAGS += -mdynamic-no-pic
272 ifeq ($(arch),x86_64)
273 CXXFLAGS += -mdynamic-no-pic
284 CXXFLAGS += -fast -mdynamic-no-pic
293 CXXFLAGS += -DIS_64BIT
297 ifeq ($(bigendian),yes)
298 CXXFLAGS += -DBIGENDIAN
302 ifeq ($(prefetch),yes)
306 CXXFLAGS += -DNO_PREFETCH
311 CXXFLAGS += -DUSE_BSFQ
316 CXXFLAGS += -msse3 -DUSE_POPCNT
319 ### 3.11 Link Time Optimization, it works since gcc 4.5 but not on mingw.
320 ### This is a mix of compile and link time options because the lto link phase
321 ### needs access to the optimization flags.
323 GCC_MAJOR := `$(CXX) -dumpversion | cut -f1 -d.`
324 GCC_MINOR := `$(CXX) -dumpversion | cut -f2 -d.`
325 ifeq (1,$(shell expr \( $(GCC_MAJOR) \> 4 \) \| \( $(GCC_MAJOR) \= 4 \& $(GCC_MINOR) \>= 5 \)))
327 LDFLAGS += $(CXXFLAGS)
331 ### ==========================================================================
332 ### Section 4. Public targets
333 ### ==========================================================================
337 @echo "To compile stockfish, type: "
339 @echo "make target ARCH=arch [COMP=comp]"
341 @echo "Supported targets:"
343 @echo "build > Build unoptimized version"
344 @echo "profile-build > Build PGO-optimized version"
345 @echo "strip > Strip executable"
346 @echo "install > Install executable"
347 @echo "clean > Clean up"
348 @echo "testrun > Make sample run"
350 @echo "Supported archs:"
352 @echo "x86-64 > x86 64-bit"
353 @echo "x86-64-modern > x86 64-bit with runtime support for popcnt instruction"
354 @echo "x86-32 > x86 32-bit excluding old hardware without SSE-support"
355 @echo "x86-32-old > x86 32-bit including also very old hardware"
356 @echo "osx-ppc-64 > PPC-Mac OS X 64 bit"
357 @echo "osx-ppc-32 > PPC-Mac OS X 32 bit"
358 @echo "osx-x86-64 > x86-Mac OS X 64 bit"
359 @echo "osx-x86-32 > x86-Mac OS X 32 bit"
360 @echo "general-64 > unspecified 64-bit"
361 @echo "general-32 > unspecified 32-bit"
362 @echo "bigendian-64 > unspecified 64-bit with bigendian byte order"
363 @echo "bigendian-32 > unspecified 32-bit with bigendian byte order"
365 @echo "Supported comps:"
367 @echo "gcc > Gnu compiler (default)"
368 @echo "icc > Intel compiler"
369 @echo "mingw > Gnu compiler with MinGW under Windows"
371 @echo "Non-standard targets:"
373 @echo "make hpux > Compile for HP-UX. Compiler = aCC"
375 @echo "Examples. If you don't know what to do, you likely want to run: "
377 @echo "make profile-build ARCH=x86-64 (This is for 64-bit systems)"
378 @echo "make profile-build ARCH=x86-32 (This is for 32-bit systems)"
382 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) config-sanity
383 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) all
386 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) config-sanity
388 @echo "Step 0/4. Preparing for profile build."
389 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_prepare)
391 @echo "Step 1/4. Building executable for benchmark ..."
393 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_make)
395 @echo "Step 2/4. Running benchmark for pgo-build ..."
396 @$(PGOBENCH) > /dev/null
398 @echo "Step 3/4. Building final executable ..."
400 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_use)
402 @echo "Step 4/4. Deleting profile data ..."
403 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_clean)
409 -mkdir -p -m 755 $(BINDIR)
411 -strip $(BINDIR)/$(EXE)
414 $(RM) $(EXE) $(EXE).exe *.o .depend *~ core bench.txt *.gcda
422 ### ==========================================================================
423 ### Section 5. Private targets
424 ### ==========================================================================
431 @echo "debug: '$(debug)'"
432 @echo "optimize: '$(optimize)'"
433 @echo "arch: '$(arch)'"
435 @echo "bits: '$(bits)'"
436 @echo "bigendian: '$(bigendian)'"
437 @echo "prefetch: '$(prefetch)'"
438 @echo "bsfq: '$(bsfq)'"
439 @echo "popcnt: '$(popcnt)'"
443 @echo "CXXFLAGS: $(CXXFLAGS)"
444 @echo "LDFLAGS: $(LDFLAGS)"
446 @echo "Testing config sanity. If this fails, try 'make help' ..."
448 @test "$(debug)" = "yes" || test "$(debug)" = "no"
449 @test "$(optimize)" = "yes" || test "$(optimize)" = "no"
450 @test "$(arch)" = "any" || test "$(arch)" = "x86_64" || test "$(arch)" = "i386" || \
451 test "$(arch)" = "ppc64" || test "$(arch)" = "ppc"
452 @test "$(os)" = "any" || test "$(os)" = "osx"
453 @test "$(bits)" = "32" || test "$(bits)" = "64"
454 @test "$(bigendian)" = "yes" || test "$(bigendian)" = "no"
455 @test "$(prefetch)" = "yes" || test "$(prefetch)" = "no"
456 @test "$(bsfq)" = "yes" || test "$(bsfq)" = "no"
457 @test "$(popcnt)" = "yes" || test "$(popcnt)" = "no"
458 @test "$(comp)" = "gcc" || test "$(comp)" = "icc" || test "$(comp)" = "mingw"
461 $(CXX) -o $@ $(OBJS) $(LDFLAGS)
464 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) gcc-profile-clean
467 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) \
468 EXTRACXXFLAGS='-fprofile-generate' \
469 EXTRALDFLAGS='-lgcov' \
473 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) \
474 EXTRACXXFLAGS='-fprofile-use' \
475 EXTRALDFLAGS='-lgcov' \
479 @rm -rf *.gcda *.gcno bench.txt
482 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) icc-profile-clean
486 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) \
487 EXTRACXXFLAGS='-prof-gen=srcpos -prof_dir ./profdir' \
491 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) \
492 EXTRACXXFLAGS='-prof_use -prof_dir ./profdir' \
496 @rm -rf profdir bench.txt
499 -@$(CXX) $(DEPENDFLAGS) -MM $(OBJS:.o=.cpp) > $@ 2> /dev/null
504 ### ==========================================================================
505 ### Section 6. Non-standard targets
506 ### ==========================================================================
510 CXX='/opt/aCC/bin/aCC -AA +hpxstd98 -DBIGENDIAN -mt +O3 -DNDEBUG -DNO_PREFETCH' \