1 /*****************************************************************************
2 * input.c: input thread
4 *****************************************************************************
5 * Read an MPEG2 stream, demultiplex and parse it before sending it to
7 *****************************************************************************/
9 /*****************************************************************************
11 *****************************************************************************/
18 #include <sys/ioctl.h>
20 #include <netinet/in.h>
25 #include "vlc_thread.h"
30 #include "input_psi.h"
31 #include "input_pcr.h"
32 #include "input_netlist.h"
33 #include "decoder_fifo.h"
34 #include "input_file.h"
35 #include "input_network.h"
37 #include "audio_output.h"
38 #include "audio_decoder.h"
41 #include "video_output.h"
42 #include "vdec_idct.h"
43 #include "vdec_motion.h"
44 #include "video_decoder.h"
45 #include "vpar_blocks.h"
46 #include "vpar_headers.h"
47 #include "vpar_synchro.h"
48 #include "video_parser.h"
50 #include "ac3_decoder.h"
51 #include "ac3_decoder_thread.h"
52 #include "spu_decoder.h"
56 /*****************************************************************************
58 *****************************************************************************/
59 static void RunThread ( input_thread_t *p_input );
60 static void ErrorThread ( input_thread_t *p_input );
61 static void EndThread ( input_thread_t *p_input );
63 static __inline__ int input_ReadPacket( input_thread_t *p_input );
64 static __inline__ void input_SortPacket( input_thread_t *p_input,
65 ts_packet_t *ts_packet );
66 static __inline__ void input_DemuxTS( input_thread_t *p_input,
67 ts_packet_t *ts_packet,
68 es_descriptor_t *es_descriptor );
69 static __inline__ void input_DemuxPES( input_thread_t *p_input,
70 ts_packet_t *ts_packet,
71 es_descriptor_t *p_es_descriptor,
72 boolean_t b_unit_start, boolean_t b_packet_lost );
73 static __inline__ void input_DemuxPSI( input_thread_t *p_input,
74 ts_packet_t *ts_packet,
75 es_descriptor_t *p_es_descriptor,
76 boolean_t b_unit_start, boolean_t b_packet_lost );
78 /*****************************************************************************
79 * input_CreateThread: creates a new input thread
80 *****************************************************************************
81 * This function creates a new input, and returns a pointer
82 * to its description. On error, it returns NULL.
83 * If pi_status is NULL, then the function will block until the thread is ready.
84 * If not, it will be updated using one of the THREAD_* constants.
85 *****************************************************************************/
86 input_thread_t *input_CreateThread ( int i_method, char *psz_source, int i_port, int i_vlan,
87 p_vout_thread_t p_vout, p_aout_thread_t p_aout, int *pi_status )
89 input_thread_t * p_input; /* thread descriptor */
90 int i_status; /* thread status */
91 int i_index; /* index for tables initialization */
93 /* Allocate descriptor */
95 p_input = (input_thread_t *)malloc( sizeof(input_thread_t) );
98 intf_ErrMsg("error: %s\n", strerror(ENOMEM));
102 /* Initialize thread properties */
104 p_input->b_error = 0;
105 p_input->pi_status = (pi_status != NULL) ? pi_status : &i_status;
106 *p_input->pi_status = THREAD_CREATE;
108 /* Initialize input method description */
109 p_input->i_method = i_method;
110 p_input->psz_source = psz_source;
111 p_input->i_port = i_port;
112 p_input->i_vlan = i_vlan;
115 case INPUT_METHOD_TS_FILE: /* file methods */
116 p_input->p_Open = input_FileOpen;
117 p_input->p_Read = input_FileRead;
118 p_input->p_Close = input_FileClose;
120 case INPUT_METHOD_TS_VLAN_BCAST: /* vlan network method */
121 if( !p_main->b_vlans )
123 intf_ErrMsg("error: vlans are not activated\n");
127 /* ... pass through */
128 case INPUT_METHOD_TS_UCAST: /* network methods */
129 case INPUT_METHOD_TS_MCAST:
130 case INPUT_METHOD_TS_BCAST:
131 p_input->p_Open = input_NetworkOpen;
132 p_input->p_Read = input_NetworkRead;
133 p_input->p_Close = input_NetworkClose;
136 intf_ErrMsg("error: unknow input method\n");
142 /* Initialize stream description */
143 for( i_index = 0; i_index < INPUT_MAX_ES; i_index++ )
145 p_input->p_es[i_index].i_id = EMPTY_PID;
146 p_input->pp_selected_es[i_index] = NULL;
149 /* Initialize default settings for spawned decoders */
150 p_input->p_aout = p_aout;
151 p_input->p_vout = p_vout;
154 /* Initialize statistics */
155 p_input->c_loops = 0;
156 p_input->c_bytes = 0;
157 p_input->c_payload_bytes = 0;
158 p_input->c_packets_read = 0;
159 p_input->c_packets_trashed = 0;
162 /* Initialize PSI and PCR decoders */
163 if( input_PsiInit( p_input ) )
169 if( input_PcrInit( p_input ) )
171 input_PsiEnd( p_input );
176 /* Initialize netlists */
177 if( input_NetlistInit( p_input ) )
179 input_PsiEnd( p_input );
180 input_PcrEnd( p_input );
185 intf_DbgMsg("configuration: method=%d, source=%s, port=%d, vlan=%d\n",
186 i_method, psz_source, i_port, i_vlan );
188 /* Let the appropriate method open the socket. */
189 if( p_input->p_Open( p_input ) )
191 input_NetlistEnd( p_input );
192 input_PsiEnd( p_input );
193 input_PcrEnd( p_input );
198 /* Create thread and set locks. */
199 vlc_mutex_init( &p_input->netlist.lock );
200 vlc_mutex_init( &p_input->programs_lock );
201 vlc_mutex_init( &p_input->es_lock );
202 if( vlc_thread_create(&p_input->thread_id, "input", (void *) RunThread, (void *) p_input) )
204 intf_ErrMsg("error: %s\n", strerror(errno) );
205 p_input->p_Close( p_input );
206 input_NetlistEnd( p_input );;
207 input_PsiEnd( p_input );
208 input_PcrEnd( p_input );
213 intf_Msg("Input initialized\n");
215 /* If status is NULL, wait until the thread is created */
216 if( pi_status == NULL )
220 msleep( THREAD_SLEEP );
221 }while( (i_status != THREAD_READY) && (i_status != THREAD_ERROR)
222 && (i_status != THREAD_FATAL) );
223 if( i_status != THREAD_READY )
231 /*****************************************************************************
232 * input_DestroyThread: mark an input thread as zombie
233 *****************************************************************************
234 * This function should not return until the thread is effectively cancelled.
235 *****************************************************************************/
236 void input_DestroyThread( input_thread_t *p_input, int *pi_status )
238 int i_status; /* thread status */
241 p_input->pi_status = (pi_status != NULL) ? pi_status : &i_status;
242 *p_input->pi_status = THREAD_DESTROY;
244 /* Request thread destruction */
247 /* If status is NULL, wait until thread has been destroyed */
248 if( pi_status == NULL )
252 msleep( THREAD_SLEEP );
253 }while( (i_status != THREAD_OVER) && (i_status != THREAD_ERROR)
254 && (i_status != THREAD_FATAL) );
259 /*****************************************************************************
260 * input_OpenAudioStream: open an audio stream
261 *****************************************************************************
262 * This function spawns an audio decoder and plugs it on the audio output
264 *****************************************************************************/
265 int input_OpenAudioStream( input_thread_t *p_input, int i_id )
270 /*****************************************************************************
271 * input_CloseAudioStream: close an audio stream
272 *****************************************************************************
273 * This function destroys an audio decoder.
274 *****************************************************************************/
275 void input_CloseAudioStream( input_thread_t *p_input, int i_id )
280 /*****************************************************************************
281 * input_OpenVideoStream: open a video stream
282 *****************************************************************************
283 * This function spawns a video decoder and plugs it on a video output thread.
284 *****************************************************************************/
285 int input_OpenVideoStream( input_thread_t *p_input,
286 struct vout_thread_s *p_vout, struct video_cfg_s * p_cfg )
291 /*****************************************************************************
292 * input_CloseVideoStream: close a video stream
293 *****************************************************************************
294 * This function destroys an video decoder.
295 *****************************************************************************/
296 void input_CloseVideoStream( input_thread_t *p_input, int i_id )
302 /* following functions are local */
304 /*****************************************************************************
305 * InitThread: initialize input thread
306 *****************************************************************************
307 * This function is called from RunThread and performs the second step of the
308 * initialization. It returns 0 on success. Note that the thread's flag are not
309 * modified inside this function.
310 *****************************************************************************/
311 static int InitThread( input_thread_t *p_input )
313 /* Mark thread as running and return */
315 *p_input->pi_status = THREAD_READY;
316 intf_DbgMsg("thread ready\n");
320 /*****************************************************************************
321 * RunThread: main thread loop
322 *****************************************************************************
323 * Thread in charge of processing the network packets and demultiplexing.
324 *****************************************************************************/
325 static void RunThread( input_thread_t *p_input )
328 * Initialize thread and free configuration
330 p_input->b_error = InitThread( p_input );
331 if( p_input->b_error )
333 free( p_input ); /* destroy descriptor */
341 while( !p_input->b_die && !p_input->b_error )
343 /* Scatter read the UDP packet from the network or the file. */
344 if( (input_ReadPacket( p_input )) == (-1) )
346 /* ??? Normally, a thread can't kill itself, but we don't have
347 * any method in case of an error condition ... */
348 p_input->b_error = 1;
359 if( p_input->b_error )
361 ErrorThread( p_input );
365 EndThread( p_input );
366 intf_DbgMsg("thread end\n");
370 /*****************************************************************************
371 * ErrorThread: RunThread() error loop
372 *****************************************************************************
373 * This function is called when an error occured during thread main's loop.
374 *****************************************************************************/
375 static void ErrorThread( input_thread_t *p_input )
377 /* Wait until a `die' order */
379 while( !p_input->b_die )
382 msleep( VOUT_IDLE_SLEEP );
386 /*****************************************************************************
387 * EndThread: end the input thread
388 *****************************************************************************/
389 static void EndThread( input_thread_t * p_input )
391 int * pi_status; /* threas status */
392 int i_es_loop; /* es index */
396 pi_status = p_input->pi_status;
397 *pi_status = THREAD_END;
399 /* Close input method */
400 p_input->p_Close( p_input );
402 /* Destroy all decoder threads */
404 (i_es_loop < INPUT_MAX_ES) && (p_input->pp_selected_es[i_es_loop] != NULL) ;
407 switch( p_input->pp_selected_es[i_es_loop]->i_type )
412 vdec_DestroyThread( (vdec_thread_t*)(p_input->pp_selected_es[i_es_loop]->p_dec) /*, NULL */ );
414 vpar_DestroyThread( (vpar_thread_t*)(p_input->pp_selected_es[i_es_loop]->p_dec) /*, NULL */ );
419 adec_DestroyThread( (adec_thread_t*)(p_input->pp_selected_es[i_es_loop]->p_dec) );
422 ac3dec_DestroyThread( (ac3dec_thread_t *)(p_input->pp_selected_es[i_es_loop]->p_dec) );
425 spudec_DestroyThread( (spudec_thread_t *)(p_input->pp_selected_es[i_es_loop]->p_dec) );
428 /* Special streams for the PSI decoder, PID 0 and 1 */
432 intf_DbgMsg("error: unknown decoder type %d\n", p_input->pp_selected_es[i_es_loop]->i_type );
438 input_NetlistEnd( p_input ); /* clean netlist */
439 input_PsiEnd( p_input ); /* clean PSI information */
440 input_PcrEnd( p_input ); /* clean PCR information */
441 free( p_input ); /* free input_thread structure */
444 *pi_status = THREAD_OVER;
447 /*****************************************************************************
448 * input_ReadPacket: reads a packet from the network or the file
449 *****************************************************************************/
450 static __inline__ int input_ReadPacket( input_thread_t *p_input )
452 int i_base_index; /* index of the first free iovec */
455 #ifdef INPUT_LIFO_TS_NETLIST
456 int i_meanwhile_released;
457 int i_currently_removed;
459 ts_packet_t * p_ts_packet;
461 /* In this function, we only care about the TS netlist. PES netlist
462 * is for the demultiplexer. */
463 #ifdef INPUT_LIFO_TS_NETLIST
464 i_base_index = p_input->netlist.i_ts_index;
466 /* Verify that we still have packets in the TS netlist */
467 if( (INPUT_MAX_TS + INPUT_TS_READ_ONCE - 1 - p_input->netlist.i_ts_index) <= INPUT_TS_READ_ONCE )
469 intf_ErrMsg("input error: TS netlist is empty !\n");
473 #else /* FIFO netlist */
474 i_base_index = p_input->netlist.i_ts_start;
475 if( p_input->netlist.i_ts_start + INPUT_TS_READ_ONCE -1 > INPUT_MAX_TS )
477 /* The netlist is splitted in 2 parts. We must gather them to consolidate
478 the FIFO (we make the loop easily in having the same iovec at the far
479 end and in the beginning of netlist_free).
480 That's why the netlist is (INPUT_MAX_TS +1) + (INPUT_TS_READ_ONCE -1)
482 memcpy( p_input->netlist.p_ts_free + INPUT_MAX_TS + 1,
483 p_input->netlist.p_ts_free,
484 (p_input->netlist.i_ts_start + INPUT_TS_READ_ONCE - 1 - INPUT_MAX_TS)
485 * sizeof(struct iovec) );
488 /* Verify that we still have packets in the TS netlist */
489 if( ((p_input->netlist.i_ts_end -1 - p_input->netlist.i_ts_start) & INPUT_MAX_TS) <= INPUT_TS_READ_ONCE )
491 intf_ErrMsg("input error: TS netlist is empty !\n");
494 #endif /* FIFO netlist */
496 /* Scatter read the buffer. */
497 i_packet_size = (*p_input->p_Read)( p_input,
498 &p_input->netlist.p_ts_free[i_base_index],
499 INPUT_TS_READ_ONCE );
500 if( i_packet_size == (-1) )
502 // intf_DbgMsg("Read packet %d %p %d %d\n", i_base_index,
503 // &p_input->netlist.p_ts_free[i_base_index],
504 // p_input->netlist.i_ts_start,
505 // p_input->netlist.i_ts_end);
506 intf_ErrMsg("input error: readv() failed (%s)\n", strerror(errno));
510 if( i_packet_size == 0 )
512 /* No packet has been received, so stop here. */
516 /* Demultiplex the TS packets (1..INPUT_TS_READ_ONCE) received. */
517 for( i_current_index = i_base_index;
518 (i_packet_size -= TS_PACKET_SIZE) >= 0;
521 /* BTW, something REALLY bad could happen if we receive packets with
523 p_ts_packet = (ts_packet_t*)(p_input->netlist.p_ts_free[i_current_index].iov_base);
524 /* Don't cry :-), we are allowed to do that cast, because initially,
525 our buffer was malloc'ed with sizeof(ts_packet_t) */
527 /* Find out if we need this packet and demultiplex. */
528 input_SortPacket( p_input /* for current PIDs and netlist */,
532 if( i_packet_size > 0 )
534 intf_ErrMsg("input error: wrong size\n");
538 /* Remove the TS packets we have just filled from the netlist */
539 #ifdef INPUT_LIFO_TS_NETLIST
540 /* We need to take a lock here while we're calculating index positions. */
541 vlc_mutex_lock( &p_input->netlist.lock );
543 i_meanwhile_released = i_base_index - p_input->netlist.i_ts_index;
544 if( i_meanwhile_released )
546 /* That's where it becomes funny :-). Since we didn't take locks for
547 efficiency reasons, other threads (including ourselves, with
548 input_DemuxPacket) might have released packets to the netlist.
549 So we have to copy these iovec where they should go.
551 BTW, that explains why the TS netlist is
552 (INPUT_MAX_TS +1) + (TS_READ_ONCE -1) large. */
554 i_currently_removed = i_current_index - i_base_index;
555 if( i_meanwhile_released < i_currently_removed )
557 /* Copy all iovecs in that case */
558 memcpy( &p_input->netlist.p_ts_free[p_input->netlist.i_ts_index]
559 + i_currently_removed,
560 &p_input->netlist.p_ts_free[p_input->netlist.i_ts_index],
561 i_meanwhile_released * sizeof(struct iovec) );
565 /* We have fewer places than items, so we only move
566 i_currently_removed of them. */
567 memcpy( &p_input->netlist.p_ts_free[i_base_index],
568 &p_input->netlist.p_ts_free[p_input->netlist.i_ts_index],
569 i_currently_removed * sizeof(struct iovec) );
572 /* Update i_netlist_index with the information gathered above. */
573 p_input->netlist.i_ts_index += i_currently_removed;
577 /* Nothing happened. */
578 p_input->netlist.i_ts_index = i_current_index;
581 vlc_mutex_unlock( &p_input->netlist.lock );
583 #else /* FIFO netlist */
584 /* & is modulo ; that's where we make the loop. */
585 p_input->netlist.i_ts_start = i_current_index & INPUT_MAX_TS;
589 p_input->c_packets_read += i_current_index - i_base_index;
590 p_input->c_bytes += (i_current_index - i_base_index) * TS_PACKET_SIZE;
595 /*****************************************************************************
596 * input_SortPacket: find out whether we need that packet
597 *****************************************************************************/
598 static __inline__ void input_SortPacket( input_thread_t *p_input,
599 ts_packet_t *p_ts_packet )
604 /* Verify that sync_byte, error_indicator and scrambling_control are
606 if( !(p_ts_packet->buffer[0] == 0x47) || (p_ts_packet->buffer[1] & 0x80) ||
607 (p_ts_packet->buffer[3] & 0xc0) )
609 intf_DbgMsg("input debug: invalid TS header (%p)\n", p_ts_packet);
613 /* Get the PID of the packet. Note that ntohs is needed, for endianness
614 purposes (see man page). */
615 i_current_pid = U16_AT(&p_ts_packet->buffer[1]) & 0x1fff;
617 // intf_DbgMsg("input debug: pid %d received (%p)\n",
618 // i_current_pid, p_ts_packet);
620 /* Lock current ES state. */
621 vlc_mutex_lock( &p_input->es_lock );
623 /* Verify that we actually want this PID. */
624 for( i_es_loop = 0; i_es_loop < INPUT_MAX_SELECTED_ES; i_es_loop++ )
626 if( p_input->pp_selected_es[i_es_loop] != NULL)
628 if( (*p_input->pp_selected_es[i_es_loop]).i_id
631 /* Don't need the lock anymore, since the value pointed
632 out by p_input->pp_selected_es[i_es_loop] can only be
633 modified from inside the input_thread (by the PSI
634 decoder): interface thread is only allowed to modify
635 the pp_selected_es table */
636 vlc_mutex_unlock( &p_input->es_lock );
638 /* We're interested. Pass it to the demultiplexer. */
639 input_DemuxTS( p_input, p_ts_packet,
640 p_input->pp_selected_es[i_es_loop] );
646 /* pp_selected_es should not contain any hole. */
650 vlc_mutex_unlock( &p_input->es_lock );
653 /* We weren't interested in receiving this packet. Give it back to the
655 // intf_DbgMsg("SortPacket: freeing unwanted TS %p (pid %d)\n", p_ts_packet,
656 // U16_AT(&p_ts_packet->buffer[1]) & 0x1fff);
657 input_NetlistFreeTS( p_input, p_ts_packet );
659 p_input->c_packets_trashed++;
663 /*****************************************************************************
664 * input_DemuxTS: first step of demultiplexing: the TS header
665 *****************************************************************************
666 * Stream must also only contain PES and PSI, so PID must have been filtered
667 *****************************************************************************/
668 static __inline__ void input_DemuxTS( input_thread_t *p_input,
669 ts_packet_t *p_ts_packet,
670 es_descriptor_t *p_es_descriptor )
673 boolean_t b_adaption; /* Adaption field is present */
674 boolean_t b_payload; /* Packet carries payload */
675 boolean_t b_unit_start; /* A PSI or a PES start in the packet */
676 boolean_t b_trash = 0; /* Must the packet be trashed ? */
677 boolean_t b_lost = 0; /* Was there a packet lost ? */
681 ASSERT(p_es_descriptor);
683 #define p (p_ts_packet->buffer)
685 // intf_DbgMsg("input debug: TS-demultiplexing packet %p, pid %d, number %d\n",
686 // p_ts_packet, U16_AT(&p[1]) & 0x1fff, p[3] & 0x0f);
689 p_es_descriptor->c_packets++;
690 p_es_descriptor->c_bytes += TS_PACKET_SIZE;
693 /* Extract flags values from TS common header. */
694 b_unit_start = (p[1] & 0x40);
695 b_adaption = (p[3] & 0x20);
696 b_payload = (p[3] & 0x10);
698 /* Extract adaption field informations if any */
701 /* We don't have any adaptation_field, so payload start immediately
702 after the 4 byte TS header */
703 p_ts_packet->i_payload_start = 4;
707 /* p[4] is adaptation_field_length minus one */
708 p_ts_packet->i_payload_start = 5 + p[4];
710 /* The adaption field can be limited to the adaptation_field_length byte,
711 so that there is nothing to do: skip this possibility */
714 /* If the packet has both adaptation_field and payload, adaptation_field
715 cannot be more than 182 bytes long; if there is only an
716 adaptation_field, it must fill the next 183 bytes. */
717 if( b_payload ? (p[4] > 182) : (p[4] != 183) )
719 intf_DbgMsg("input debug: invalid TS adaptation field (%p)\n",
722 p_es_descriptor->c_invalid_packets++;
727 /* No we are sure that the byte containing flags is present: read it */
730 /* discontinuity_indicator */
733 intf_DbgMsg("discontinuity_indicator encountered by TS demux " \
734 "(position read: %d, saved: %d)\n", p[5] & 0x80,
735 p_es_descriptor->i_continuity_counter);
737 /* If the PID carries the PCR, there will be a system time-base
738 discontinuity. We let the PCR decoder handle that. */
739 p_es_descriptor->b_discontinuity = 1;
741 /* There also may be a continuity_counter discontinuity:
742 resynchronise our counter with the one of the stream */
743 p_es_descriptor->i_continuity_counter = (p[3] & 0x0f) - 1;
746 /* random_access_indicator */
747 p_es_descriptor->b_random |= p[5] & 0x40;
749 /* If this is a PCR_PID, and this TS packet contains a PCR,
750 we pass it along to the PCR decoder. */
751 if( (p_es_descriptor->b_pcr) && (p[5] & 0x10) )
753 /* There should be a PCR field in the packet, check if the
754 adaption field is long enough to carry it */
757 /* Call the PCR decoder */
758 input_PcrDecode( p_input, p_es_descriptor, &p[6] );
765 /* Check the continuity of the stream. */
766 i_dummy = ((p[3] & 0x0f) - p_es_descriptor->i_continuity_counter) & 0x0f;
769 /* Everything is ok, just increase our counter */
770 p_es_descriptor->i_continuity_counter++;
774 if( !b_payload && i_dummy == 0 )
776 /* This is a packet without payload, this is allowed by the draft
777 As there is nothing interessant in this packet (except PCR that
778 have already been handled), we can trash the packet. */
779 intf_DbgMsg("Packet without payload received by TS demux\n");
782 else if( i_dummy <= 0 )
784 /* Duplicate packet: mark it as being to be trashed. */
785 intf_DbgMsg("Duplicate packet received by TS demux\n");
788 else if( p_es_descriptor->i_continuity_counter == 0xFF )
790 /* This means that the packet is the first one we receive for this
791 ES since the continuity counter ranges between 0 and 0x0F
792 excepts when it has been initialized by the input: Init the
793 counter to the correct value. */
794 intf_DbgMsg("First packet for PID %d received by TS demux\n",
795 p_es_descriptor->i_id);
796 p_es_descriptor->i_continuity_counter = (p[3] & 0x0f);
800 /* This can indicate that we missed a packet or that the
801 continuity_counter wrapped and we received a dup packet: as we
802 don't know, do as if we missed a packet to be sure to recover
803 from this situation */
804 intf_DbgMsg("Packet lost by TS demux: current %d, packet %d\n",
805 p_es_descriptor->i_continuity_counter & 0x0f,
808 p_es_descriptor->i_continuity_counter = p[3] & 0x0f;
812 /* Trash the packet if it has no payload or if it is bad */
815 input_NetlistFreeTS( p_input, p_ts_packet );
817 p_input->c_packets_trashed++;
822 if( p_es_descriptor->b_psi )
824 /* The payload contains PSI tables */
825 input_DemuxPSI( p_input, p_ts_packet, p_es_descriptor,
826 b_unit_start, b_lost );
830 /* The payload carries a PES stream */
831 input_DemuxPES( p_input, p_ts_packet, p_es_descriptor,
832 b_unit_start, b_lost );
842 /*****************************************************************************
844 *****************************************************************************
845 * Gather a PES packet and analyzes its header.
846 *****************************************************************************/
847 static __inline__ void input_DemuxPES( input_thread_t *p_input,
848 ts_packet_t *p_ts_packet,
849 es_descriptor_t *p_es_descriptor,
850 boolean_t b_unit_start,
851 boolean_t b_packet_lost )
853 decoder_fifo_t * p_fifo;
854 u8 i_pes_header_size;
856 pes_packet_t* p_last_pes;
858 int i_ts_payload_size;
861 #define p_pes (p_es_descriptor->p_pes_packet)
865 ASSERT(p_es_descriptor);
867 // intf_DbgMsg("PES-demultiplexing %p (%p)\n", p_ts_packet, p_pes);
869 /* If we lost data, discard the PES packet we are trying to reassemble
870 if any and wait for the beginning of a new one in order to synchronise
872 if( b_packet_lost && p_pes != NULL )
874 intf_DbgMsg("PES %p trashed because of packet lost\n", p_pes);
875 input_NetlistFreePES( p_input, p_pes );
879 /* If the TS packet contains the begining of a new PES packet, and if we
880 were reassembling a PES packet, then the PES should be complete now,
881 so parse its header and give it to the decoders */
882 if( b_unit_start && p_pes != NULL )
884 // intf_DbgMsg("End of PES packet %p\n", p_pes);
886 /* Parse the header. The header has a variable length, but in order
887 to improve the algorithm, we will read the 14 bytes we may be
889 p_ts = p_pes->p_first_ts;
890 i_ts_payload_size = p_ts->i_payload_end - p_ts->i_payload_start;
893 if(i_ts_payload_size >= PES_HEADER_SIZE)
895 /* This part of the header entirely fits in the payload of
896 the first TS packet */
897 p_pes->p_pes_header = &(p_ts->buffer[p_ts->i_payload_start]);
901 /* This part of the header does not fit in the current TS packet:
902 copy the part of the header we are interested in to the
903 p_pes_header_save buffer. The buffer is dynamicly allocated if
904 needed so it's time expensive but this situation almost never occur. */
905 intf_DbgMsg("Code never tested encountered, WARNING ! (benny)\n");
906 if( !p_pes->p_pes_header_save )
908 p_pes->p_pes_header_save = malloc(PES_HEADER_SIZE);
913 memcpy(p_pes->p_pes_header_save + i_dummy,
914 &p_ts->buffer[p_ts->i_payload_start], i_ts_payload_size);
915 i_dummy += i_ts_payload_size;
917 p_ts = p_ts->p_next_ts;
920 /* The payload of the PES packet is shorter than the 14 bytes
921 we would read. This means that high packet lost occured
922 so the PES won't be usefull for any decoder. Moreover,
923 this should never happen so we can trash the packet and
924 exit roughly without regrets */
925 intf_DbgMsg("PES packet too short: trashed\n");
926 input_NetlistFreePES( p_input, p_pes );
932 i_ts_payload_size = p_ts->i_payload_end - p_ts->i_payload_start;
934 while(i_ts_payload_size + i_dummy < PES_HEADER_SIZE);
936 /* This last TS packet is partly header, partly payload, so just
937 copy the header part */
938 memcpy(p_pes->p_pes_header_save + i_dummy,
939 &p_ts->buffer[p_ts->i_payload_start],
940 PES_HEADER_SIZE - i_dummy);
942 /* The header must be read in the buffer not in any TS packet */
943 p_pes->p_pes_header = p_pes->p_pes_header_save;
946 /* Now we have the part of the PES header we were interested in:
949 /* First read the 6 header bytes common to all PES packets:
950 use them to test the PES validity */
951 if( (p_pes->p_pes_header[0] || p_pes->p_pes_header[1] ||
952 (p_pes->p_pes_header[2] != 1)) ||
953 /* packet_start_code_prefix != 0x000001 */
954 ((i_dummy = U16_AT(p_pes->p_pes_header + 4)) &&
955 (i_dummy + 6 != p_pes->i_pes_size)) )
956 /* PES_packet_length is set and != total received payload */
958 /* Trash the packet and set p_pes to NULL to be sure the next PES
959 packet will have its b_data_lost flag set */
960 intf_DbgMsg("Corrupted PES packet received: trashed\n");
961 input_NetlistFreePES( p_input, p_pes );
967 /* The PES packet is valid. Check its type to test if it may
968 carry additional informations in a header extension */
969 p_pes->i_stream_id = p_pes->p_pes_header[3];
971 switch( p_pes->i_stream_id )
973 case 0xBE: /* Padding */
974 case 0xBC: /* Program stream map */
975 case 0xBF: /* Private stream 2 */
978 case 0xFF: /* Program stream directory */
979 case 0xF2: /* DSMCC stream */
980 case 0xF8: /* ITU-T H.222.1 type E stream */
981 /* The payload begins immediatly after the 6 bytes header, so
982 we have finished with the parsing */
983 i_pes_header_size = 6;
987 /* The PES header contains at least 3 more bytes: parse them */
988 p_pes->b_data_alignment = p_pes->p_pes_header[6] & 0x04;
989 p_pes->b_has_pts = p_pes->p_pes_header[7] & 0x80;
990 i_pes_header_size = p_pes->p_pes_header[8] + 9;
992 /* Now parse the optional header extensions (in the limit of
994 if( p_pes->b_has_pts )
996 pcr_descriptor_t * p_pcr;
998 p_pcr = p_input->p_pcr;
1001 ( ((mtime_t)(p_pes->p_pes_header[9] & 0x0E) << 29) |
1002 (((mtime_t)U16_AT(p_pes->p_pes_header + 10) << 14) - (1 << 14)) |
1003 ((mtime_t)U16_AT(p_pes->p_pes_header + 12) >> 1) ) * 300;
1006 if( p_pcr->i_synchro_state )
1008 switch( p_pcr->i_synchro_state )
1010 case SYNCHRO_NOT_STARTED:
1011 p_pes->b_has_pts = 0;
1015 p_pes->i_pts += p_pcr->delta_pcr;
1016 p_pcr->delta_absolute = mdate() - p_pes->i_pts + INPUT_PTS_DELAY;
1017 p_pes->i_pts += p_pcr->delta_absolute;
1018 p_pcr->i_synchro_state = 0;
1021 case SYNCHRO_REINIT: /* We skip a PES */
1022 p_pes->b_has_pts = 0;
1023 p_pcr->i_synchro_state = SYNCHRO_START;
1029 p_pes->i_pts += p_pcr->delta_pcr + p_pcr->delta_absolute;
1035 /* Now we've parsed the header, we just have to indicate in some
1036 specific TS packets where the PES payload begins (renumber
1037 i_payload_start), so that the decoders can find the beginning
1038 of their data right out of the box. */
1039 p_ts = p_pes->p_first_ts;
1040 i_ts_payload_size = p_ts->i_payload_end - p_ts->i_payload_start;
1041 while( i_pes_header_size > i_ts_payload_size )
1043 /* These packets are entirely filled by the PES header. */
1044 i_pes_header_size -= i_ts_payload_size;
1045 p_ts->i_payload_start = p_ts->i_payload_end;
1046 /* Go to the next TS packet: here we won't have to test it is
1047 not NULL because we trash the PES packets when packet lost
1049 p_ts = p_ts->p_next_ts;
1050 i_ts_payload_size = p_ts->i_payload_end - p_ts->i_payload_start;
1052 /* This last packet is partly header, partly payload. */
1053 p_ts->i_payload_start += i_pes_header_size;
1056 /* Now we can eventually put the PES packet in the decoder's
1058 switch( p_es_descriptor->i_type )
1060 case MPEG1_VIDEO_ES:
1061 case MPEG2_VIDEO_ES:
1063 p_fifo = &(((vdec_thread_t*)(p_es_descriptor->p_dec))->fifo);
1065 p_fifo = &(((vpar_thread_t*)(p_es_descriptor->p_dec))->fifo);
1069 case MPEG1_AUDIO_ES:
1070 case MPEG2_AUDIO_ES:
1071 p_fifo = &(((adec_thread_t*)(p_es_descriptor->p_dec))->fifo);
1075 /* we skip 4 bytes at the beginning of the AC3 payload */
1076 p_ts->i_payload_start += 4;
1077 p_fifo = &(((ac3dec_thread_t *)(p_es_descriptor->p_dec))->fifo);
1081 /* we skip 4 bytes at the beginning of the subpicture payload */
1082 p_ts->i_payload_start += 4;
1083 p_fifo = &(((spudec_thread_t *)(p_es_descriptor->p_dec))->fifo);
1087 /* This should never happen */
1088 intf_DbgMsg("Unknown stream type (%d, %d): PES trashed\n",
1089 p_es_descriptor->i_id, p_es_descriptor->i_type);
1094 if( p_fifo != NULL )
1096 vlc_mutex_lock( &p_fifo->data_lock );
1097 if( DECODER_FIFO_ISFULL( *p_fifo ) )
1099 /* The FIFO is full !!! This should not happen. */
1101 p_input->c_packets_trashed += p_pes->i_ts_packets;
1102 p_es_descriptor->c_invalid_packets += p_pes->i_ts_packets;
1104 input_NetlistFreePES( p_input, p_pes );
1105 intf_DbgMsg("PES trashed - fifo full ! (%d, %d)\n",
1106 p_es_descriptor->i_id, p_es_descriptor->i_type);
1110 // intf_DbgMsg("Putting %p into fifo %p/%d\n",
1111 // p_pes, p_fifo, p_fifo->i_end);
1112 p_fifo->buffer[p_fifo->i_end] = p_pes;
1113 DECODER_FIFO_INCEND( *p_fifo );
1115 /* Warn the decoder that it's got work to do. */
1116 vlc_cond_signal( &p_fifo->data_wait );
1118 vlc_mutex_unlock( &p_fifo->data_lock );
1122 intf_DbgMsg("No fifo to receive PES %p: trash\n", p_pes);
1124 p_input->c_packets_trashed += p_pes->i_ts_packets;
1125 p_es_descriptor->c_invalid_packets += p_pes->i_ts_packets;
1127 input_NetlistFreePES( p_input, p_pes );
1133 /* If we are at the beginning of a new PES packet, we must fetch a new
1134 PES buffer to begin with the reassembly of this PES packet. This is
1135 also here that we can synchronise with the stream if we we lost
1136 packets or if the decoder has just started */
1141 /* Get a new one PES from the PES netlist. */
1142 if( (p_pes = input_NetlistGetPES( p_input )) == (NULL) )
1144 /* PES netlist is empty ! */
1145 p_input->b_error = 1;
1149 // intf_DbgMsg("New PES packet %p (first TS: %p)\n", p_pes, p_ts_packet);
1151 /* Init the PES fields so that the first TS packet could be correctly
1152 added to the PES packet (see below) */
1153 p_pes->p_first_ts = p_ts_packet;
1154 p_pes->p_last_ts = NULL;
1156 /* If the last pes packet was null, this means that the synchronisation
1157 was lost and so warn the decoder that he will have to find a way to
1160 p_pes->b_data_loss = 1;
1162 /* Read the b_random_access flag status and then reinit it */
1163 p_pes->b_random_access = p_es_descriptor->b_random;
1164 p_es_descriptor->b_random = 0;
1169 /* If we are synchronised with the stream, and so if we are ready to
1170 receive correctly the data, add the TS packet to the current PES
1174 // intf_DbgMsg("Adding TS %p to PES %p\n", p_ts_packet, p_pes);
1176 /* Size of the payload carried in the TS packet */
1177 i_ts_payload_size = p_ts_packet->i_payload_end -
1178 p_ts_packet->i_payload_start;
1180 /* Update the relations between the TS packets */
1181 p_ts_packet->p_prev_ts = p_pes->p_last_ts;
1182 p_ts_packet->p_next_ts = NULL;
1183 if( p_pes->i_ts_packets != 0 )
1185 /* Regarder si il serait pas plus efficace de ne creer que les liens
1186 precedent->suivant pour le moment, et les liens suivant->precedent
1187 quand le paquet est termine */
1188 /* Otherwise it is the first TS packet. */
1189 p_pes->p_last_ts->p_next_ts = p_ts_packet;
1191 /* Now add the TS to the PES packet */
1192 p_pes->p_last_ts = p_ts_packet;
1193 p_pes->i_ts_packets++;
1194 p_pes->i_pes_size += i_ts_payload_size;
1198 i_dummy = p_ts_packet->i_payload_end - p_ts_packet->i_payload_start;
1199 p_es_descriptor->c_payload_bytes += i_dummy;
1204 /* Since we don't use the TS packet to build a PES packet, we don't
1205 need it anymore, so give it back to the netlist */
1206 // intf_DbgMsg("Trashing TS %p: no PES being build\n", p_ts_packet);
1207 input_NetlistFreeTS( p_input, p_ts_packet );
1216 /*****************************************************************************
1218 *****************************************************************************
1219 * Notice that current ES state has been locked by input_SortPacket. (No more true,
1220 * changed by benny - See if it's ok, and definitely change the code ???????? )
1221 *****************************************************************************/
1222 static __inline__ void input_DemuxPSI( input_thread_t *p_input,
1223 ts_packet_t *p_ts_packet,
1224 es_descriptor_t *p_es_descriptor,
1225 boolean_t b_unit_start, boolean_t b_packet_lost )
1227 int i_data_offset; /* Offset of the interesting data in the TS packet */
1228 u16 i_data_length; /* Length of those data */
1229 //boolean_t b_first_section; /* Was there another section in the TS packet ? */
1232 ASSERT(p_ts_packet);
1233 ASSERT(p_es_descriptor);
1235 #define p_psi (p_es_descriptor->p_psi_section)
1237 // intf_DbgMsg( "input debug: PSI demultiplexing %p (%p)\n", p_ts_packet, p_input);
1239 // intf_DbgMsg( "Packet: %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x (unit start: %d)\n", p_ts_packet->buffer[p_ts_packet->i_payload_start], p_ts_packet->buffer[p_ts_packet->i_payload_start+1], p_ts_packet->buffer[p_ts_packet->i_payload_start+2], p_ts_packet->buffer[p_ts_packet->i_payload_start+3], p_ts_packet->buffer[p_ts_packet->i_payload_start+4], p_ts_packet->buffer[p_ts_packet->i_payload_start+5], p_ts_packet->buffer[p_ts_packet->i_payload_start+6], p_ts_packet->buffer[p_ts_packet->i_payload_start+7], p_ts_packet->buffer[p_ts_packet->i_payload_start+8], p_ts_packet->buffer[p_ts_packet->i_payload_start+9], p_ts_packet->buffer[p_ts_packet->i_payload_start+10], p_ts_packet->buffer[p_ts_packet->i_payload_start+11], p_ts_packet->buffer[p_ts_packet->i_payload_start+12], p_ts_packet->buffer[p_ts_packet->i_payload_start+13], p_ts_packet->buffer[p_ts_packet->i_payload_start+14], p_ts_packet->buffer[p_ts_packet->i_payload_start+15], p_ts_packet->buffer[p_ts_packet->i_payload_start+16], p_ts_packet->buffer[p_ts_packet->i_payload_start+17], p_ts_packet->buffer[p_ts_packet->i_payload_start+18], p_ts_packet->buffer[p_ts_packet->i_payload_start+19], p_ts_packet->buffer[p_ts_packet->i_payload_start+20], b_unit_start);
1242 /* Try to find the beginning of the payload in the packet to initialise
1243 the do-while loop that follows -> Compute the i_data_offset variable:
1244 by default, the value is set so that we won't enter in the while loop.
1245 It will be set to a correct value if the data are not corrupted */
1246 i_data_offset = TS_PACKET_SIZE;
1248 /* Has the reassembly of a section already began in a previous packet ? */
1249 if( p_psi->b_running_section )
1251 /* Was data lost since the last TS packet ? */
1254 /* Discard the packet and wait for the begining of a new one to resynch */
1255 p_psi->b_running_section = 0;
1256 p_psi->i_current_position = 0;
1257 intf_DbgMsg( "PSI section(s) discarded due to packet loss\n" );
1261 /* The data that complete a previously began section are always at
1262 the beginning of the TS payload... */
1263 i_data_offset = p_ts_packet->i_payload_start;
1264 /* ...Unless there is a pointer field, that we have to bypass */
1267 // intf_DbgMsg( "New part of the section received at offset %d\n", i_data_offset );
1270 /* We are looking for the beginning of a new section */
1275 /* Get the offset at which the data for that section can be found
1276 The offset is stored in the pointer_field since we are interested in
1277 the first section of the TS packet. Note that the +1 is to bypass
1278 the pointer field */
1279 i_data_offset = p_ts_packet->i_payload_start +
1280 p_ts_packet->buffer[p_ts_packet->i_payload_start] + 1;
1281 // intf_DbgMsg( "New section beginning at offset %d in TS packet\n", i_data_offset );
1285 /* This may either mean that the TS is bad or that the packet contains
1286 the end of a section that had been discarded in a previous loop:
1287 trash the TS packet since we cannot do anything with those data: */
1288 p_psi->b_running_section = 0;
1289 p_psi->i_current_position = 0;
1290 intf_DbgMsg( "PSI packet discarded due to lack of synchronisation\n" );
1294 /* The section we will deal with during the first iteration of the following
1295 loop is the first one contained in the TS packet */
1296 // b_first_section = 1;
1298 /* Reassemble the pieces of sections contained in the TS packet and decode
1299 the sections that could have been completed.
1300 Stop when we reach the end of the packet or stuffing bytes */
1301 while( i_data_offset < TS_PACKET_SIZE && p_ts_packet->buffer[i_data_offset] != 0xFF )
1303 /* If the current section is a new one, reinit the data fields of the p_psi
1304 struct to start its decoding */
1305 if( !p_psi->b_running_section )
1307 /* Read the length of the new section */
1308 p_psi->i_length = (U16_AT(&p_ts_packet->buffer[i_data_offset+1]) & 0xFFF) + 3;
1309 // intf_DbgMsg( "Section length %d\n", p_psi->i_length );
1310 if( p_psi->i_length > PSI_SECTION_SIZE )
1312 /* The TS packet is corrupted, stop here to avoid possible a seg fault */
1313 intf_DbgMsg( "PSI Section size is too big, aborting its reception\n" );
1317 /* Init the reassembly of that section */
1318 p_psi->b_running_section = 1;
1319 p_psi->i_current_position = 0;
1322 /* Compute the length of data related to the section in this TS packet */
1323 if( p_psi->i_length - p_psi->i_current_position > TS_PACKET_SIZE - i_data_offset)
1324 i_data_length = TS_PACKET_SIZE - i_data_offset;
1326 i_data_length = p_psi->i_length - p_psi->i_current_position;
1328 /* Copy those data in the section buffer */
1329 memcpy( &p_psi->buffer[p_psi->i_current_position], &p_ts_packet->buffer[i_data_offset],
1332 /* Interesting data are now after the ones we copied, since no gap is
1333 allowed between 2 sections in a TS packets */
1334 i_data_offset += i_data_length;
1336 /* Decode the packet if it is now complete */
1337 if (p_psi->i_length == p_psi->i_current_position + i_data_length)
1339 /* Packet is complete, decode it */
1340 // intf_DbgMsg( "SECTION COMPLETE: starting decoding of its data\n" );
1341 input_PsiDecode( p_input, p_psi );
1343 /* Prepare the buffer to receive a new section */
1344 p_psi->i_current_position = 0;
1345 p_psi->b_running_section = 0;
1347 /* The new section won't be the first anymore */
1348 //b_first_section = 0;
1352 /* Prepare the buffer to receive the next part of the section */
1353 p_psi->i_current_position += i_data_length;
1354 // intf_DbgMsg( "Section not complete, waiting for the end\n" );
1357 // intf_DbgMsg( "Must loop ? Next data offset: %d, stuffing: %d\n",
1358 // i_data_offset, p_ts_packet->buffer[i_data_offset] );
1361 /* Relase the TS packet, we don't need it anymore */
1362 input_NetlistFreeTS( p_input, p_ts_packet );