/*
Stockfish, a UCI chess playing engine derived from Glaurung 2.1
Copyright (C) 2004-2008 Tord Romstad (Glaurung author)
- Copyright (C) 2008-2009 Marco Costalba
+ Copyright (C) 2008-2010 Marco Costalba, Joona Kiiski, Tord Romstad
Stockfish is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
////
#include <cassert>
-#include <cmath>
#include <cstring>
-#include "movegen.h"
#include "tt.h"
-#if defined(_MSC_VER)
-#include <xmmintrin.h>
-#endif
-
-// This is the number of TTEntry slots for each position
-static const int ClusterSize = 5;
-
// The main transposition table
TranspositionTable TT;
TranspositionTable::TranspositionTable() {
- size = writes = 0;
+ size = 0;
entries = 0;
generation = 0;
}
/// TranspositionTable::set_size sets the size of the transposition table,
/// measured in megabytes.
-void TranspositionTable::set_size(unsigned mbSize) {
-
- assert(mbSize >= 4 && mbSize <= 4096);
+void TranspositionTable::set_size(size_t mbSize) {
- unsigned newSize = 1024;
+ size_t newSize = 1024;
- // We store a cluster of ClusterSize number of TTEntry for each position
- // and newSize is the maximum number of storable positions.
- while ((2 * newSize) * ClusterSize * (sizeof(TTEntry)) <= (mbSize << 20))
+ // Transposition table consists of clusters and
+ // each cluster consists of ClusterSize number of TTEntries.
+ // Each non-empty entry contains information of exactly one position.
+ // newSize is the number of clusters we are going to allocate.
+ while ((2 * newSize) * sizeof(TTCluster) <= (mbSize << 20))
newSize *= 2;
if (newSize != size)
{
size = newSize;
delete [] entries;
- entries = new TTEntry[size * ClusterSize];
+ entries = new TTCluster[size];
if (!entries)
{
std::cerr << "Failed to allocate " << mbSize
<< " MB for transposition table." << std::endl;
Application::exit_with_failure();
}
- clear();
}
}
/// TranspositionTable::clear overwrites the entire transposition table
/// with zeroes. It is called whenever the table is resized, or when the
/// user asks the program to clear the table (from the UCI interface).
-/// Perhaps we should also clear it when the "ucinewgame" command is recieved?
+/// Perhaps we should also clear it when the "ucinewgame" command is received?
void TranspositionTable::clear() {
- memset(entries, 0, size * ClusterSize * sizeof(TTEntry));
-}
-
-
-/// TranspositionTable::first_entry returns a pointer to the first
-/// entry of a cluster given a position. The low 32 bits of the key
-/// are used to get the index in the table.
-
-inline TTEntry* TranspositionTable::first_entry(const Key posKey) const {
-
- return entries + ((uint32_t(posKey) & (size - 1)) * ClusterSize);
+ memset(entries, 0, size * sizeof(TTCluster));
}
-/// TranspositionTable::store writes a new entry containing a position,
-/// a value, a value type, a search depth, and a best move to the
-/// transposition table. Transposition table is organized in clusters of
-/// four TTEntry objects, and when a new entry is written, it replaces
-/// the least valuable of the four entries in a cluster. A TTEntry t1 is
-/// considered to be more valuable than a TTEntry t2 if t1 is from the
+/// TranspositionTable::store writes a new entry containing position key and
+/// valuable information of current position.
+/// The Lowest order bits of position key are used to decide on which cluster
+/// the position will be placed.
+/// When a new entry is written and there are no empty entries available in cluster,
+/// it replaces the least valuable of entries.
+/// A TTEntry t1 is considered to be more valuable than a TTEntry t2 if t1 is from the
/// current search and t2 is from a previous search, or if the depth of t1
-/// is bigger than the depth of t2. A TTEntry of type VALUE_TYPE_EVAL
-/// never replaces another entry for the same position.
+/// is bigger than the depth of t2.
-void TranspositionTable::store(const Key posKey, Value v, ValueType t, Depth d, Move m) {
+void TranspositionTable::store(const Key posKey, Value v, ValueType t, Depth d, Move m, Value statV, Value kingD) {
+ int c1, c2, c3;
TTEntry *tte, *replace;
uint32_t posKey32 = posKey >> 32; // Use the high 32 bits as key
{
if (!tte->key() || tte->key() == posKey32) // empty or overwrite old
{
- // Do not overwrite when new type is VALUE_TYPE_EVAL
- if (tte->key() && t == VALUE_TYPE_EVAL)
- return;
-
+ // Preserve any existing ttMove
if (m == MOVE_NONE)
m = tte->move();
- *tte = TTEntry(posKey32, v, t, d, m, generation);
+ tte->save(posKey32, v, t, d, m, generation, statV, kingD);
return;
}
- else if (i == 0) // replace would be a no-op in this common case
+
+ if (i == 0) // Replacing first entry is default and already set before entering for-loop
continue;
- int c1 = (replace->generation() == generation ? 2 : 0);
- int c2 = (tte->generation() == generation ? -2 : 0);
- int c3 = (tte->depth() < replace->depth() ? 1 : 0);
+ c1 = (replace->generation() == generation ? 2 : 0);
+ c2 = (tte->generation() == generation ? -2 : 0);
+ c3 = (tte->depth() < replace->depth() ? 1 : 0);
if (c1 + c2 + c3 > 0)
replace = tte;
}
- *replace = TTEntry(posKey32, v, t, d, m, generation);
- writes++;
+ replace->save(posKey32, v, t, d, m, generation, statV, kingD);
}
}
-/// TranspositionTable::prefetch looks up the current position in the
-/// transposition table and load it in L1/L2 cache. This is a non
-/// blocking function and do not stalls the CPU waiting for data
-/// to be loaded from RAM, that can be very slow. When we will
-/// subsequently call retrieve() the TT data will be already
-/// quickly accessible in L1/l2 CPU cache.
-
-void TranspositionTable::prefetch(const Key posKey) const {
-
-#if defined(_MSC_VER)
- _mm_prefetch((char*)first_entry(posKey), _MM_HINT_T0);
-#else
- __builtin_prefetch((const void*)first_entry(posKey), 0, 3);
-#endif
-}
-
-
/// TranspositionTable::new_search() is called at the beginning of every new
/// search. It increments the "generation" variable, which is used to
/// distinguish transposition table entries from previous searches from
/// entries from the current search.
void TranspositionTable::new_search() {
-
generation++;
- writes = 0;
-}
-
-
-/// TranspositionTable::insert_pv() is called at the end of a search
-/// iteration, and inserts the PV back into the PV. This makes sure
-/// the old PV moves are searched first, even if the old TT entries
-/// have been overwritten.
-
-void TranspositionTable::insert_pv(const Position& pos, Move pv[]) {
-
- StateInfo st;
- Position p(pos);
-
- for (int i = 0; pv[i] != MOVE_NONE; i++)
- {
- store(p.get_key(), VALUE_NONE, VALUE_TYPE_NONE, Depth(-127*OnePly), pv[i]);
- p.do_move(pv[i], st);
- }
-}
-
-
-/// TranspositionTable::extract_pv() extends a PV by adding moves from the
-/// transposition table at the end. This should ensure that the PV is almost
-/// always at least two plies long, which is important, because otherwise we
-/// will often get single-move PVs when the search stops while failing high,
-/// and a single-move PV means that we don't have a ponder move.
-
-void TranspositionTable::extract_pv(const Position& pos, Move pv[]) {
-
- int ply;
- Position p(pos);
- StateInfo st[100];
-
- for (ply = 0; pv[ply] != MOVE_NONE; ply++)
- p.do_move(pv[ply], st[ply]);
-
- bool stop;
- const TTEntry* tte;
- for (stop = false, tte = retrieve(p.get_key());
- tte && tte->move() != MOVE_NONE && !stop;
- tte = retrieve(p.get_key()), ply++)
- {
- if (!move_is_legal(p, tte->move()))
- break;
- pv[ply] = tte->move();
- p.do_move(pv[ply], st[ply]);
- for (int j = 0; j < ply; j++)
- if (st[j].key == p.get_key()) stop = true;
- }
- pv[ply] = MOVE_NONE;
-}
-
-
-/// TranspositionTable::full() returns the permill of all transposition table
-/// entries which have received at least one write during the current search.
-/// It is used to display the "info hashfull ..." information in UCI.
-
-int TranspositionTable::full() const {
-
- double N = double(size) * ClusterSize;
- return int(1000 * (1 - exp(writes * log(1.0 - 1.0/N))));
}