+
+class NonMipmapCapableInput : public FlatInput {
+public:
+ NonMipmapCapableInput(ImageFormat format, MovitPixelFormat pixel_format, GLenum type, unsigned width, unsigned height)
+ : FlatInput(format, pixel_format, type, width, height) {}
+
+ bool can_supply_mipmaps() const override { return false; }
+ bool set_int(const std::string& key, int value) override {
+ if (key == "needs_mipmaps") {
+ assert(value == 0);
+ }
+ return FlatInput::set_int(key, value);
+ }
+};
+
+// The same test as MipmapGenerationWorks, but with an input that refuses
+// to supply mipmaps.
+TEST(EffectChainTest, MipmapsWithNonMipmapCapableInput) {
+ float data[] = { // In 4x4 blocks.
+ 1.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 1.0f,
+
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 0.5f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 1.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 0.0f,
+
+ 1.0f, 1.0f, 1.0f, 1.0f,
+ 1.0f, 1.0f, 1.0f, 1.0f,
+ 1.0f, 1.0f, 1.0f, 1.0f,
+ 1.0f, 1.0f, 1.0f, 1.0f,
+
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 1.0f, 1.0f, 0.0f,
+ 0.0f, 1.0f, 1.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ };
+ float expected_data[] = { // Repeated four times each way.
+ 0.125f, 0.125f, 0.125f, 0.125f,
+ 0.09375f, 0.09375f, 0.09375f, 0.09375f,
+ 1.0f, 1.0f, 1.0f, 1.0f,
+ 0.25f, 0.25f, 0.25f, 0.25f,
+
+ 0.125f, 0.125f, 0.125f, 0.125f,
+ 0.09375f, 0.09375f, 0.09375f, 0.09375f,
+ 1.0f, 1.0f, 1.0f, 1.0f,
+ 0.25f, 0.25f, 0.25f, 0.25f,
+
+ 0.125f, 0.125f, 0.125f, 0.125f,
+ 0.09375f, 0.09375f, 0.09375f, 0.09375f,
+ 1.0f, 1.0f, 1.0f, 1.0f,
+ 0.25f, 0.25f, 0.25f, 0.25f,
+
+ 0.125f, 0.125f, 0.125f, 0.125f,
+ 0.09375f, 0.09375f, 0.09375f, 0.09375f,
+ 1.0f, 1.0f, 1.0f, 1.0f,
+ 0.25f, 0.25f, 0.25f, 0.25f,
+ };
+ float out_data[4 * 16];
+ EffectChainTester tester(nullptr, 4, 16, FORMAT_GRAYSCALE);
+
+ ImageFormat format;
+ format.color_space = COLORSPACE_sRGB;
+ format.gamma_curve = GAMMA_LINEAR;
+
+ NonMipmapCapableInput *input = new NonMipmapCapableInput(format, FORMAT_GRAYSCALE, GL_FLOAT, 4, 16);
+ input->set_pixel_data(data);
+ tester.get_chain()->add_input(input);
+ tester.get_chain()->add_effect(new MipmapNeedingEffect());
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ expect_equal(expected_data, out_data, 4, 16);
+}
+
+TEST(EffectChainTest, ResizeDownByFourThenUpByFour) {
+ float data[] = { // In 4x4 blocks.
+ 1.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 1.0f,
+
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 0.5f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 1.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 0.0f,
+
+ 1.0f, 1.0f, 1.0f, 1.0f,
+ 1.0f, 1.0f, 1.0f, 1.0f,
+ 1.0f, 1.0f, 1.0f, 1.0f,
+ 1.0f, 1.0f, 1.0f, 1.0f,
+
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 1.0f, 1.0f, 0.0f,
+ 0.0f, 1.0f, 1.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ };
+ float expected_data[] = { // Repeated four times horizontaly, interpolated vertically.
+ 0.1250f, 0.1250f, 0.1250f, 0.1250f,
+ 0.1250f, 0.1250f, 0.1250f, 0.1250f,
+ 0.1211f, 0.1211f, 0.1211f, 0.1211f,
+ 0.1133f, 0.1133f, 0.1133f, 0.1133f,
+ 0.1055f, 0.1055f, 0.1055f, 0.1055f,
+ 0.0977f, 0.0977f, 0.0977f, 0.0977f,
+ 0.2070f, 0.2070f, 0.2070f, 0.2070f,
+ 0.4336f, 0.4336f, 0.4336f, 0.4336f,
+ 0.6602f, 0.6602f, 0.6602f, 0.6602f,
+ 0.8867f, 0.8867f, 0.8867f, 0.8867f,
+ 0.9062f, 0.9062f, 0.9062f, 0.9062f,
+ 0.7188f, 0.7188f, 0.7188f, 0.7188f,
+ 0.5312f, 0.5312f, 0.5312f, 0.5312f,
+ 0.3438f, 0.3438f, 0.3438f, 0.3438f,
+ 0.2500f, 0.2500f, 0.2500f, 0.2500f,
+ 0.2500f, 0.2500f, 0.2500f, 0.2500f,
+ };
+ float out_data[4 * 16];
+
+ ResizeEffect *downscale = new ResizeEffect();
+ ASSERT_TRUE(downscale->set_int("width", 1));
+ ASSERT_TRUE(downscale->set_int("height", 4));
+
+ ResizeEffect *upscale = new ResizeEffect();
+ ASSERT_TRUE(upscale->set_int("width", 4));
+ ASSERT_TRUE(upscale->set_int("height", 16));
+
+ EffectChainTester tester(data, 4, 16, FORMAT_GRAYSCALE, COLORSPACE_sRGB, GAMMA_LINEAR);
+ tester.get_chain()->add_effect(downscale);
+ tester.get_chain()->add_effect(upscale);
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ expect_equal(expected_data, out_data, 4, 16);
+}
+
+// An effect to verify that you can turn off mipmaps; it downscales by two,
+// which gives blur with mipmaps and aliasing (picks out every other pixel)
+// without.
+class Downscale2xEffect : public Effect {
+public:
+ explicit Downscale2xEffect(MipmapRequirements mipmap_requirements)
+ : mipmap_requirements(mipmap_requirements)
+ {
+ register_vec2("offset", offset);
+ }
+ MipmapRequirements needs_mipmaps() const override { return mipmap_requirements; }
+
+ string effect_type_id() const override { return "Downscale2xEffect"; }
+ string output_fragment_shader() override { return read_file("downscale2x.frag"); }
+
+private:
+ const MipmapRequirements mipmap_requirements;
+ float offset[2] { 0.0f, 0.0f };
+};
+
+TEST(EffectChainTest, MipmapChainGetsSplit) {
+ float data[] = {
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ 1.0f, 0.0f, 1.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ 1.0f, 0.0f, 1.0f, 0.0f,
+ };
+
+ // The intermediate result after the first step looks like this,
+ // assuming there are no mipmaps (the zeros are due to border behavior):
+ //
+ // 0 0 0 0
+ // 0 0 0 0
+ // 1 1 0 0
+ // 1 1 0 0
+ //
+ // so another 2x downscale towards the bottom left will give
+ //
+ // 0 0
+ // 1 0
+ //
+ // with yet more zeros coming in on the top and the right from the border.
+ float expected_data[] = {
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ 1.0f, 0.0f, 0.0f, 0.0f,
+ };
+ float out_data[4 * 4];
+
+ float offset[] = { -0.5f / 4.0f, -0.5f / 4.0f };
+ RewritingEffect<Downscale2xEffect> *pick_out_bottom_left = new RewritingEffect<Downscale2xEffect>(Effect::CANNOT_ACCEPT_MIPMAPS);
+ ASSERT_TRUE(pick_out_bottom_left->effect->set_vec2("offset", offset));
+
+ RewritingEffect<Downscale2xEffect> *downscale2x = new RewritingEffect<Downscale2xEffect>(Effect::NEEDS_MIPMAPS);
+
+ EffectChainTester tester(data, 4, 4, FORMAT_GRAYSCALE, COLORSPACE_sRGB, GAMMA_LINEAR);
+ tester.get_chain()->add_effect(pick_out_bottom_left);
+ tester.get_chain()->add_effect(downscale2x);
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ EXPECT_NE(pick_out_bottom_left->replaced_node->containing_phase,
+ downscale2x->replaced_node->containing_phase);
+
+ expect_equal(expected_data, out_data, 4, 4);
+}
+
+// An effect that adds its two inputs together. Used below.
+class AddEffect : public Effect {
+public:
+ AddEffect() {}
+ string effect_type_id() const override { return "AddEffect"; }
+ string output_fragment_shader() override { return read_file("add.frag"); }
+ unsigned num_inputs() const override { return 2; }
+ AlphaHandling alpha_handling() const override { return DONT_CARE_ALPHA_TYPE; }
+};
+
+// Constructs the graph
+//
+// FlatInput |
+// / \ |
+// MultiplyEffect MultiplyEffect |
+// \ / |
+// AddEffect |
+//
+// and verifies that it gives the correct output.
+TEST(EffectChainTest, DiamondGraph) {
+ float data[] = {
+ 1.0f, 1.0f,
+ 1.0f, 0.0f,
+ };
+ float expected_data[] = {
+ 2.5f, 2.5f,
+ 2.5f, 0.0f,
+ };
+ float out_data[2 * 2];
+
+ const float half[] = { 0.5f, 0.5f, 0.5f, 0.5f };
+ const float two[] = { 2.0f, 2.0f, 2.0f, 0.5f };
+
+ MultiplyEffect *mul_half = new MultiplyEffect();
+ ASSERT_TRUE(mul_half->set_vec4("factor", half));
+
+ MultiplyEffect *mul_two = new MultiplyEffect();
+ ASSERT_TRUE(mul_two->set_vec4("factor", two));
+
+ EffectChainTester tester(nullptr, 2, 2);
+
+ ImageFormat format;
+ format.color_space = COLORSPACE_sRGB;
+ format.gamma_curve = GAMMA_LINEAR;
+
+ FlatInput *input = new FlatInput(format, FORMAT_GRAYSCALE, GL_FLOAT, 2, 2);
+ input->set_pixel_data(data);
+
+ tester.get_chain()->add_input(input);
+ tester.get_chain()->add_effect(mul_half, input);
+ tester.get_chain()->add_effect(mul_two, input);
+ tester.get_chain()->add_effect(new AddEffect(), mul_half, mul_two);
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ expect_equal(expected_data, out_data, 2, 2);
+}
+
+// Constructs the graph
+//
+// FlatInput |
+// / \ |
+// MultiplyEffect MultiplyEffect |
+// \ | |
+// \ BouncingIdentityEffect |
+// \ / |
+// AddEffect |
+//
+// and verifies that it gives the correct output.
+TEST(EffectChainTest, DiamondGraphWithOneInputUsedInTwoPhases) {
+ float data[] = {
+ 1.0f, 1.0f,
+ 1.0f, 0.0f,
+ };
+ float expected_data[] = {
+ 2.5f, 2.5f,
+ 2.5f, 0.0f,
+ };
+ float out_data[2 * 2];
+
+ const float half[] = { 0.5f, 0.5f, 0.5f, 0.5f };
+ const float two[] = { 2.0f, 2.0f, 2.0f, 0.5f };
+
+ MultiplyEffect *mul_half = new MultiplyEffect();
+ ASSERT_TRUE(mul_half->set_vec4("factor", half));
+
+ MultiplyEffect *mul_two = new MultiplyEffect();
+ ASSERT_TRUE(mul_two->set_vec4("factor", two));
+
+ BouncingIdentityEffect *bounce = new BouncingIdentityEffect();
+
+ EffectChainTester tester(nullptr, 2, 2);
+
+ ImageFormat format;
+ format.color_space = COLORSPACE_sRGB;
+ format.gamma_curve = GAMMA_LINEAR;
+
+ FlatInput *input = new FlatInput(format, FORMAT_GRAYSCALE, GL_FLOAT, 2, 2);
+ input->set_pixel_data(data);
+
+ tester.get_chain()->add_input(input);
+ tester.get_chain()->add_effect(mul_half, input);
+ tester.get_chain()->add_effect(mul_two, input);
+ tester.get_chain()->add_effect(bounce, mul_two);
+ tester.get_chain()->add_effect(new AddEffect(), mul_half, bounce);
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ expect_equal(expected_data, out_data, 2, 2);
+}
+
+// Constructs the graph
+//
+// FlatInput |
+// / \ |
+// Downscale2xEffect (mipmaps) Downscale2xEffect (no mipmaps) |
+// | | |
+// Downscale2xEffect (mipmaps) Downscale2xEffect (no mipmaps) |
+// \ / |
+// AddEffect |
+//
+// and verifies that it gives the correct output. Due to the conflicting
+// mipmap demands, EffectChain needs to make two phases; exactly where it's
+// split is less important, though (this is a fairly obscure situation that
+// is unlikely to happen in practice).
+TEST(EffectChainTest, DiamondGraphWithConflictingMipmaps) {
+ float data[] = {
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ 1.0f, 0.0f, 1.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ 1.0f, 0.0f, 1.0f, 0.0f,
+ };
+
+ // Same situation as MipmapChainGetsSplit. The output of the two
+ // downscales with no mipmaps looks like this:
+ //
+ // 0 0 0 0
+ // 0 0 0 0
+ // 0 0 0 0
+ // 1 0 0 0
+ //
+ // and the one with mipmaps is 0.25 everywhere. Due to postmultiplied
+ // alpha, we get the average even though we are using AddEffect.
+ float expected_data[] = {
+ 0.125f, 0.125f, 0.125f, 0.125f,
+ 0.125f, 0.125f, 0.125f, 0.125f,
+ 0.125f, 0.125f, 0.125f, 0.125f,
+ 0.625f, 0.125f, 0.125f, 0.125f,
+ };
+ float out_data[4 * 4];
+
+ float offset[] = { -0.5f / 4.0f, -0.5f / 4.0f };
+ Downscale2xEffect *nomipmap1 = new Downscale2xEffect(Effect::CANNOT_ACCEPT_MIPMAPS);
+ Downscale2xEffect *nomipmap2 = new Downscale2xEffect(Effect::CANNOT_ACCEPT_MIPMAPS);
+ ASSERT_TRUE(nomipmap1->set_vec2("offset", offset));
+ ASSERT_TRUE(nomipmap2->set_vec2("offset", offset));
+
+ Downscale2xEffect *mipmap1 = new Downscale2xEffect(Effect::NEEDS_MIPMAPS);
+ Downscale2xEffect *mipmap2 = new Downscale2xEffect(Effect::NEEDS_MIPMAPS);
+
+ EffectChainTester tester(nullptr, 4, 4);
+
+ ImageFormat format;
+ format.color_space = COLORSPACE_sRGB;
+ format.gamma_curve = GAMMA_LINEAR;
+
+ FlatInput *input = new FlatInput(format, FORMAT_GRAYSCALE, GL_FLOAT, 4, 4);
+ input->set_pixel_data(data);
+
+ tester.get_chain()->add_input(input);
+
+ tester.get_chain()->add_effect(nomipmap1, input);
+ tester.get_chain()->add_effect(nomipmap2, nomipmap1);
+
+ tester.get_chain()->add_effect(mipmap1, input);
+ tester.get_chain()->add_effect(mipmap2, mipmap1);
+
+ tester.get_chain()->add_effect(new AddEffect(), nomipmap2, mipmap2);
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ expect_equal(expected_data, out_data, 4, 4);
+}
+
+TEST(EffectChainTest, EffectUsedTwiceOnlyGetsOneGammaConversion) {
+ float data[] = {
+ 0.735f, 0.0f,
+ 0.735f, 0.0f,
+ };
+ float expected_data[] = {
+ 0.0f, 0.5f, // 0.5 and not 1.0, since AddEffect doesn't clamp alpha properly.
+ 0.0f, 0.5f,
+ };
+ float out_data[2 * 2];
+
+ EffectChainTester tester(nullptr, 2, 2);
+ tester.add_input(data, FORMAT_GRAYSCALE, COLORSPACE_sRGB, GAMMA_sRGB);
+
+ // MirrorEffect does not get linear light, so the conversions will be
+ // inserted after it, not before.
+ RewritingEffect<MirrorEffect> *effect = new RewritingEffect<MirrorEffect>();
+ tester.get_chain()->add_effect(effect);
+
+ Effect *identity1 = tester.get_chain()->add_effect(new IdentityEffect(), effect);
+ Effect *identity2 = tester.get_chain()->add_effect(new IdentityEffect(), effect);
+ tester.get_chain()->add_effect(new AddEffect(), identity1, identity2);
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ expect_equal(expected_data, out_data, 2, 2);
+
+ Node *node = effect->replaced_node;
+ ASSERT_EQ(1u, node->incoming_links.size());
+ ASSERT_EQ(1u, node->outgoing_links.size());
+ EXPECT_EQ("FlatInput", node->incoming_links[0]->effect->effect_type_id());
+ EXPECT_EQ("GammaExpansionEffect", node->outgoing_links[0]->effect->effect_type_id());
+}
+
+TEST(EffectChainTest, EffectUsedTwiceOnlyGetsOneColorspaceConversion) {
+ float data[] = {
+ 0.5f, 0.0f,
+ 0.5f, 0.0f,
+ };
+ float expected_data[] = {
+ 0.0f, 0.5f, // 0.5 and not 1.0, since AddEffect doesn't clamp alpha properly.
+ 0.0f, 0.5f,
+ };
+ float out_data[2 * 2];
+
+ EffectChainTester tester(nullptr, 2, 2);
+ tester.add_input(data, FORMAT_GRAYSCALE, COLORSPACE_REC_601_625, GAMMA_LINEAR);
+
+ // MirrorEffect does not get linear light, so the conversions will be
+ // inserted after it, not before.
+ RewritingEffect<MirrorEffect> *effect = new RewritingEffect<MirrorEffect>();
+ tester.get_chain()->add_effect(effect);
+
+ Effect *identity1 = tester.get_chain()->add_effect(new IdentityEffect(), effect);
+ Effect *identity2 = tester.get_chain()->add_effect(new IdentityEffect(), effect);
+ tester.get_chain()->add_effect(new AddEffect(), identity1, identity2);
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ expect_equal(expected_data, out_data, 2, 2);
+
+ Node *node = effect->replaced_node;
+ ASSERT_EQ(1u, node->incoming_links.size());
+ ASSERT_EQ(1u, node->outgoing_links.size());
+ EXPECT_EQ("FlatInput", node->incoming_links[0]->effect->effect_type_id());
+ EXPECT_EQ("ColorspaceConversionEffect", node->outgoing_links[0]->effect->effect_type_id());
+}
+
+// An effect that does nothing, but requests texture bounce and stores
+// its input size.
+class SizeStoringEffect : public BouncingIdentityEffect {
+public:
+ SizeStoringEffect() : input_width(-1), input_height(-1) {}
+ void inform_input_size(unsigned input_num, unsigned width, unsigned height) override {
+ assert(input_num == 0);
+ input_width = width;
+ input_height = height;
+ }
+ string effect_type_id() const override { return "SizeStoringEffect"; }
+
+ int input_width, input_height;
+};
+
+TEST(EffectChainTest, SameInputsGiveSameOutputs) {
+ float data[2 * 2] = {
+ 0.0f, 0.0f,
+ 0.0f, 0.0f,
+ };
+ float out_data[4 * 3];
+
+ EffectChainTester tester(nullptr, 4, 3); // Note non-square aspect.
+
+ ImageFormat format;
+ format.color_space = COLORSPACE_sRGB;
+ format.gamma_curve = GAMMA_LINEAR;
+
+ FlatInput *input1 = new FlatInput(format, FORMAT_GRAYSCALE, GL_FLOAT, 2, 2);
+ input1->set_pixel_data(data);
+
+ FlatInput *input2 = new FlatInput(format, FORMAT_GRAYSCALE, GL_FLOAT, 2, 2);
+ input2->set_pixel_data(data);
+
+ SizeStoringEffect *input_store = new SizeStoringEffect();
+
+ tester.get_chain()->add_input(input1);
+ tester.get_chain()->add_input(input2);
+ tester.get_chain()->add_effect(new AddEffect(), input1, input2);
+ tester.get_chain()->add_effect(input_store);
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ EXPECT_EQ(2, input_store->input_width);
+ EXPECT_EQ(2, input_store->input_height);
+}
+
+TEST(EffectChainTest, AspectRatioConversion) {
+ float data1[4 * 3] = {
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ };
+ float data2[7 * 7] = {
+ 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 1.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f,
+ 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f,
+ };
+
+ // The right conversion here is that the 7x7 image decides the size,
+ // since it is the biggest, so everything is scaled up to 9x7
+ // (keep the height, round the width 9.333 to 9).
+ float out_data[9 * 7];
+
+ EffectChainTester tester(nullptr, 4, 3);
+
+ ImageFormat format;
+ format.color_space = COLORSPACE_sRGB;
+ format.gamma_curve = GAMMA_LINEAR;
+
+ FlatInput *input1 = new FlatInput(format, FORMAT_GRAYSCALE, GL_FLOAT, 4, 3);
+ input1->set_pixel_data(data1);
+
+ FlatInput *input2 = new FlatInput(format, FORMAT_GRAYSCALE, GL_FLOAT, 7, 7);
+ input2->set_pixel_data(data2);
+
+ SizeStoringEffect *input_store = new SizeStoringEffect();
+
+ tester.get_chain()->add_input(input1);
+ tester.get_chain()->add_input(input2);
+ tester.get_chain()->add_effect(new AddEffect(), input1, input2);
+ tester.get_chain()->add_effect(input_store);
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ EXPECT_EQ(9, input_store->input_width);
+ EXPECT_EQ(7, input_store->input_height);
+}
+
+// Tests that putting a BlueInput (constant color) into its own pass,
+// which creates a phase that doesn't need texture coordinates,
+// doesn't mess up a second phase that actually does.
+TEST(EffectChainTest, FirstPhaseWithNoTextureCoordinates) {
+ const int size = 2;
+ float data[] = {
+ 1.0f,
+ 0.0f,
+ };
+ float expected_data[] = {
+ 1.0f, 1.0f, 2.0f, 2.0f,
+ 0.0f, 0.0f, 1.0f, 2.0f,
+ };
+ float out_data[size * 4];
+ // First say that we have sRGB, linear input.
+ ImageFormat format;
+ format.color_space = COLORSPACE_sRGB;
+ format.gamma_curve = GAMMA_LINEAR;
+ FlatInput *input = new FlatInput(format, FORMAT_GRAYSCALE, GL_FLOAT, 1, size);
+
+ input->set_pixel_data(data);
+ EffectChainTester tester(nullptr, 1, size);
+ tester.get_chain()->add_input(new BlueInput());
+ Effect *phase1_end = tester.get_chain()->add_effect(new BouncingIdentityEffect());
+ tester.get_chain()->add_input(input);
+ tester.get_chain()->add_effect(new AddEffect(), phase1_end, input);
+
+ tester.run(out_data, GL_RGBA, COLORSPACE_sRGB, GAMMA_LINEAR, OUTPUT_ALPHA_FORMAT_POSTMULTIPLIED);
+
+ expect_equal(expected_data, out_data, 4, size);
+}
+
+// An effect that does nothing except changing its output sizes.
+class VirtualResizeEffect : public Effect {
+public:
+ VirtualResizeEffect(int width, int height, int virtual_width, int virtual_height)
+ : width(width),
+ height(height),
+ virtual_width(virtual_width),
+ virtual_height(virtual_height) {}
+ string effect_type_id() const override { return "VirtualResizeEffect"; }
+ string output_fragment_shader() override { return read_file("identity.frag"); }
+
+ bool changes_output_size() const override { return true; }
+
+ void get_output_size(unsigned *width, unsigned *height,
+ unsigned *virtual_width, unsigned *virtual_height) const override {
+ *width = this->width;
+ *height = this->height;
+ *virtual_width = this->virtual_width;
+ *virtual_height = this->virtual_height;
+ }
+
+private:
+ int width, height, virtual_width, virtual_height;
+};
+
+TEST(EffectChainTest, VirtualSizeIsSentOnToInputs) {
+ const int size = 2, bigger_size = 3;
+ float data[size * size] = {
+ 1.0f, 0.0f,
+ 0.0f, 1.0f,
+ };
+ float out_data[size * size];
+
+ EffectChainTester tester(data, size, size, FORMAT_GRAYSCALE, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ SizeStoringEffect *size_store = new SizeStoringEffect();
+
+ tester.get_chain()->add_effect(new VirtualResizeEffect(size, size, bigger_size, bigger_size));
+ tester.get_chain()->add_effect(size_store);
+ tester.get_chain()->add_effect(new VirtualResizeEffect(size, size, size, size));
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ EXPECT_EQ(bigger_size, size_store->input_width);
+ EXPECT_EQ(bigger_size, size_store->input_height);
+
+ // If the resize is implemented as non-virtual, we'll fail here,
+ // since bilinear scaling from 2x2 → 3x3 → 2x2 is not very exact.
+ expect_equal(data, out_data, size, size);
+}
+
+// An effect that is like VirtualResizeEffect, but always has virtual and real
+// sizes the same (and promises this).
+class NonVirtualResizeEffect : public VirtualResizeEffect {
+public:
+ NonVirtualResizeEffect(int width, int height)
+ : VirtualResizeEffect(width, height, width, height) {}
+ string effect_type_id() const override { return "NonVirtualResizeEffect"; }
+ bool sets_virtual_output_size() const override { return false; }
+};
+
+// An effect that promises one-to-one sampling (unlike IdentityEffect).
+class OneToOneEffect : public Effect {
+public:
+ OneToOneEffect() {}
+ string effect_type_id() const override { return "OneToOneEffect"; }
+ string output_fragment_shader() override { return read_file("identity.frag"); }
+ bool strong_one_to_one_sampling() const override { return true; }
+};
+
+TEST_P(WithAndWithoutComputeShaderTest, NoBounceWithOneToOneSampling) {
+ const int size = 2;
+ float data[size * size] = {
+ 1.0f, 0.0f,
+ 0.0f, 1.0f,
+ };
+ float out_data[size * size];
+
+ EffectChainTester tester(data, size, size, FORMAT_GRAYSCALE, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ RewritingEffect<OneToOneEffect> *effect1 = new RewritingEffect<OneToOneEffect>();
+ RewritingEffect<OneToOneEffect> *effect2 = new RewritingEffect<OneToOneEffect>();
+
+ if (GetParam() == "compute") {
+ tester.get_chain()->add_effect(new IdentityComputeEffect());
+ } else {
+ tester.get_chain()->add_effect(new NonVirtualResizeEffect(size, size));
+ }
+ tester.get_chain()->add_effect(effect1);
+ tester.get_chain()->add_effect(effect2);
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ expect_equal(data, out_data, size, size);
+
+ // The first OneToOneEffect should be in the same phase as its input.
+ ASSERT_EQ(1u, effect1->replaced_node->incoming_links.size());
+ EXPECT_EQ(effect1->replaced_node->incoming_links[0]->containing_phase,
+ effect1->replaced_node->containing_phase);
+
+ // The second OneToOneEffect, too.
+ EXPECT_EQ(effect1->replaced_node->containing_phase,
+ effect2->replaced_node->containing_phase);
+}
+
+TEST(EffectChainTest, BounceWhenOneToOneIsBroken) {
+ const int size = 2;
+ float data[size * size] = {
+ 1.0f, 0.0f,
+ 0.0f, 1.0f,
+ };
+ float out_data[size * size];
+
+ EffectChainTester tester(data, size, size, FORMAT_GRAYSCALE, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ RewritingEffect<OneToOneEffect> *effect1 = new RewritingEffect<OneToOneEffect>();
+ RewritingEffect<OneToOneEffect> *effect2 = new RewritingEffect<OneToOneEffect>();
+ RewritingEffect<IdentityEffect> *effect3 = new RewritingEffect<IdentityEffect>();
+ RewritingEffect<OneToOneEffect> *effect4 = new RewritingEffect<OneToOneEffect>();
+
+ tester.get_chain()->add_effect(new NonVirtualResizeEffect(size, size));
+ tester.get_chain()->add_effect(effect1);
+ tester.get_chain()->add_effect(effect2);
+ tester.get_chain()->add_effect(effect3);
+ tester.get_chain()->add_effect(effect4);
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ expect_equal(data, out_data, size, size);
+
+ // The NonVirtualResizeEffect should be in a different phase from
+ // the IdentityEffect (since the latter is not one-to-one),
+ // ie., the chain should be broken somewhere between them, but exactly
+ // where doesn't matter.
+ ASSERT_EQ(1u, effect1->replaced_node->incoming_links.size());
+ EXPECT_NE(effect1->replaced_node->incoming_links[0]->containing_phase,
+ effect3->replaced_node->containing_phase);
+
+ // The last OneToOneEffect should also be in the same phase as the
+ // IdentityEffect (the phase was already broken).
+ EXPECT_EQ(effect3->replaced_node->containing_phase,
+ effect4->replaced_node->containing_phase);
+}
+
+// Does not use EffectChainTest, so that it can construct an EffectChain without
+// a shared ResourcePool (which is also properly destroyed afterwards).
+// Also turns on debugging to test that code path.
+TEST(EffectChainTest, IdentityWithOwnPool) {
+ const int width = 3, height = 2;
+ float data[] = {
+ 0.0f, 0.25f, 0.3f,
+ 0.75f, 1.0f, 1.0f,
+ };
+ const float expected_data[] = {
+ 0.75f, 1.0f, 1.0f,
+ 0.0f, 0.25f, 0.3f,
+ };
+ float out_data[6], temp[6 * 4];
+
+ EffectChain chain(width, height);
+ MovitDebugLevel old_movit_debug_level = movit_debug_level;
+ movit_debug_level = MOVIT_DEBUG_ON;
+
+ ImageFormat format;
+ format.color_space = COLORSPACE_sRGB;
+ format.gamma_curve = GAMMA_LINEAR;
+
+ FlatInput *input = new FlatInput(format, FORMAT_GRAYSCALE, GL_FLOAT, width, height);
+ input->set_pixel_data(data);
+ chain.add_input(input);
+ chain.add_output(format, OUTPUT_ALPHA_FORMAT_POSTMULTIPLIED);
+
+ GLuint texnum, fbo;
+ glGenTextures(1, &texnum);
+ check_error();
+ glBindTexture(GL_TEXTURE_2D, texnum);
+ check_error();
+ glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA32F, width, height, 0, GL_RGBA, GL_FLOAT, nullptr);
+ check_error();
+
+ glGenFramebuffers(1, &fbo);
+ check_error();
+ glBindFramebuffer(GL_FRAMEBUFFER, fbo);
+ check_error();
+ glFramebufferTexture2D(
+ GL_FRAMEBUFFER,
+ GL_COLOR_ATTACHMENT0,
+ GL_TEXTURE_2D,
+ texnum,
+ 0);
+ check_error();
+ glBindFramebuffer(GL_FRAMEBUFFER, 0);
+ check_error();
+
+ chain.finalize();
+
+ chain.render_to_fbo(fbo, width, height);
+
+ glBindFramebuffer(GL_FRAMEBUFFER, fbo);
+ check_error();
+ glReadPixels(0, 0, width, height, GL_RGBA, GL_FLOAT, temp);
+ check_error();
+ for (unsigned i = 0; i < 6; ++i) {
+ out_data[i] = temp[i * 4];
+ }
+
+ expect_equal(expected_data, out_data, width, height);
+
+ // Reset the debug status again.
+ movit_debug_level = old_movit_debug_level;
+}
+
+// A dummy effect whose only purpose is to test sprintf decimal behavior.
+class PrintfingBlueEffect : public Effect {
+public:
+ PrintfingBlueEffect() {}
+ string effect_type_id() const override { return "PrintfingBlueEffect"; }
+ string output_fragment_shader() override {
+ stringstream ss;
+ ss.imbue(locale("C"));
+ ss.precision(8);
+ ss << "vec4 FUNCNAME(vec2 tc) { return vec4("
+ << 0.0f << ", " << 0.0f << ", "
+ << 0.5f << ", " << 1.0f << "); }\n";
+ return ss.str();
+ }
+};
+
+TEST(EffectChainTest, StringStreamLocalesWork) {
+ // An example of a locale with comma instead of period as decimal separator.
+ // Obviously, if you run on a machine without this locale available,
+ // the test will always succeed. Note that the OpenGL driver might call
+ // setlocale() behind-the-scenes, and that might corrupt the returned
+ // pointer, so we need to take our own copy of it here.
+ char *saved_locale = setlocale(LC_ALL, "nb_NO.UTF_8");
+ if (saved_locale == nullptr) {
+ // The locale wasn't available.
+ return;
+ }
+ saved_locale = strdup(saved_locale);
+ float data[] = {
+ 0.0f, 0.0f, 0.0f, 0.0f,
+ };
+ float expected_data[] = {
+ 0.0f, 0.0f, 0.5f, 1.0f,
+ };
+ float out_data[4];
+ EffectChainTester tester(data, 1, 1, FORMAT_RGBA_PREMULTIPLIED_ALPHA, COLORSPACE_sRGB, GAMMA_LINEAR);
+ tester.get_chain()->add_effect(new PrintfingBlueEffect());
+ tester.run(out_data, GL_RGBA, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ expect_equal(expected_data, out_data, 4, 1);
+
+ setlocale(LC_ALL, saved_locale);
+ free(saved_locale);
+}
+
+TEST(EffectChainTest, sRGBIntermediate) {
+ float data[] = {
+ 0.0f, 0.5f, 0.0f, 1.0f,
+ };
+ float out_data[4];
+ EffectChainTester tester(data, 1, 1, FORMAT_RGBA_PREMULTIPLIED_ALPHA, COLORSPACE_sRGB, GAMMA_LINEAR);
+ tester.get_chain()->set_intermediate_format(GL_SRGB8);
+ tester.get_chain()->add_effect(new IdentityEffect());
+ tester.get_chain()->add_effect(new BouncingIdentityEffect());
+ tester.run(out_data, GL_RGBA, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ EXPECT_GE(fabs(out_data[1] - data[1]), 1e-3)
+ << "Expected sRGB not to be able to represent 0.5 exactly (got " << out_data[1] << ")";
+ EXPECT_LT(fabs(out_data[1] - data[1]), 0.1f)
+ << "Expected sRGB to be able to represent 0.5 approximately (got " << out_data[1] << ")";
+
+ // This state should have been preserved.
+ EXPECT_FALSE(glIsEnabled(GL_FRAMEBUFFER_SRGB));
+}
+
+// An effect that is like IdentityEffect, but also does not require linear light.
+class PassThroughEffect : public IdentityEffect {
+public:
+ PassThroughEffect() {}
+ string effect_type_id() const override { return "PassThroughEffect"; }
+ bool needs_linear_light() const override { return false; }
+ AlphaHandling alpha_handling() const override { return DONT_CARE_ALPHA_TYPE; }
+};
+
+// Same, just also bouncing.
+class BouncingPassThroughEffect : public BouncingIdentityEffect {
+public:
+ BouncingPassThroughEffect() {}
+ string effect_type_id() const override { return "BouncingPassThroughEffect"; }
+ bool needs_linear_light() const override { return false; }
+ bool needs_texture_bounce() const override { return true; }
+ AlphaHandling alpha_handling() const override { return DONT_CARE_ALPHA_TYPE; }
+};
+
+TEST(EffectChainTest, Linear10bitIntermediateAccuracy) {
+ // Note that we do the comparison in sRGB space, which is what we
+ // typically would want; however, we do the sRGB conversion ourself
+ // to avoid compounding errors from shader conversions into the
+ // analysis.
+ const int size = 4096; // 12-bit.
+ float linear_data[size], data[size], out_data[size];
+
+ for (int i = 0; i < size; ++i) {
+ linear_data[i] = i / double(size - 1);
+ data[i] = srgb_to_linear(linear_data[i]);
+ }
+
+ EffectChainTester tester(data, size, 1, FORMAT_GRAYSCALE, COLORSPACE_sRGB, GAMMA_LINEAR, GL_RGBA32F);
+ tester.get_chain()->set_intermediate_format(GL_RGB10_A2);
+ tester.get_chain()->add_effect(new IdentityEffect());
+ tester.get_chain()->add_effect(new BouncingIdentityEffect());
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ for (int i = 0; i < size; ++i) {
+ out_data[i] = linear_to_srgb(out_data[i]);
+ }
+
+ // This maximum error is pretty bad; about 6.5 levels of a 10-bit sRGB
+ // framebuffer. (Slightly more on NVIDIA cards.)
+ expect_equal(linear_data, out_data, size, 1, 7.5e-3, 2e-5);
+}
+
+TEST_P(WithAndWithoutComputeShaderTest, SquareRoot10bitIntermediateAccuracy) {
+ // Note that we do the comparison in sRGB space, which is what we
+ // typically would want; however, we do the sRGB conversion ourself
+ // to avoid compounding errors from shader conversions into the
+ // analysis.
+ const int size = 4096; // 12-bit.
+ float linear_data[size], data[size], out_data[size];
+
+ for (int i = 0; i < size; ++i) {
+ linear_data[i] = i / double(size - 1);
+ data[i] = srgb_to_linear(linear_data[i]);
+ }
+
+ EffectChainTester tester(data, size, 1, FORMAT_GRAYSCALE, COLORSPACE_sRGB, GAMMA_LINEAR, GL_RGBA32F);
+ tester.get_chain()->set_intermediate_format(GL_RGB10_A2, SQUARE_ROOT_FRAMEBUFFER_TRANSFORMATION);
+ if (GetParam() == "compute") {
+ tester.get_chain()->add_effect(new IdentityComputeEffect());
+ } else {
+ tester.get_chain()->add_effect(new IdentityEffect());
+ }
+ tester.get_chain()->add_effect(new BouncingIdentityEffect());
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ for (int i = 0; i < size; ++i) {
+ out_data[i] = linear_to_srgb(out_data[i]);
+ }
+
+ // This maximum error is much better; about 0.7 levels of a 10-bit sRGB
+ // framebuffer (ideal would be 0.5). That is an order of magnitude better
+ // than in the linear test above. The RMS error is much better, too.
+ expect_equal(linear_data, out_data, size, 1, 7.5e-4, 5e-6);
+}
+
+TEST(EffectChainTest, SquareRootIntermediateIsTurnedOffForNonLinearData) {
+ const int size = 256; // 8-bit.
+ float data[size], out_data[size];
+
+ for (int i = 0; i < size; ++i) {
+ data[i] = i / double(size - 1);
+ }
+
+ EffectChainTester tester(data, size, 1, FORMAT_GRAYSCALE, COLORSPACE_sRGB, GAMMA_REC_601, GL_RGBA32F);
+ tester.get_chain()->set_intermediate_format(GL_RGB8, SQUARE_ROOT_FRAMEBUFFER_TRANSFORMATION);
+ tester.get_chain()->add_effect(new PassThroughEffect());
+ tester.get_chain()->add_effect(new BouncingPassThroughEffect());
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_REC_601);
+
+ // The data should be passed through nearly exactly, since there is no effect
+ // on the path that requires linear light. (Actually, it _is_ exact modulo
+ // fp32 errors, but the error bounds is strictly _less than_, not zero.)
+ expect_equal(data, out_data, size, 1, 1e-6, 1e-6);
+}
+
+// An effect that stores which program number was last run under.
+class RecordingIdentityEffect : public Effect {
+public:
+ RecordingIdentityEffect() {}
+ string effect_type_id() const override { return "RecordingIdentityEffect"; }
+ string output_fragment_shader() override { return read_file("identity.frag"); }
+
+ GLuint last_glsl_program_num;
+ void set_gl_state(GLuint glsl_program_num, const std::string& prefix, unsigned *sampler_num) override
+ {
+ last_glsl_program_num = glsl_program_num;
+ }
+};
+
+TEST(EffectChainTest, ProgramsAreClonedForMultipleThreads) {
+ float data[] = {
+ 0.0f, 0.25f, 0.3f,
+ 0.75f, 1.0f, 1.0f,
+ };
+ float out_data[6];
+ EffectChainTester tester(data, 3, 2, FORMAT_GRAYSCALE, COLORSPACE_sRGB, GAMMA_LINEAR);
+ RecordingIdentityEffect *effect = new RecordingIdentityEffect();
+ tester.get_chain()->add_effect(effect);
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ expect_equal(data, out_data, 3, 2);
+
+ ASSERT_NE(0u, effect->last_glsl_program_num);
+
+ // Now pretend some other effect is using this program number;
+ // ResourcePool will then need to clone it.
+ ResourcePool *resource_pool = tester.get_chain()->get_resource_pool();
+ GLuint master_program_num = resource_pool->use_glsl_program(effect->last_glsl_program_num);
+ EXPECT_EQ(effect->last_glsl_program_num, master_program_num);
+
+ // Re-run should still give the correct data, but it should have run
+ // with a different program.
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+ expect_equal(data, out_data, 3, 2);
+ EXPECT_NE(effect->last_glsl_program_num, master_program_num);
+
+ // Release the program, and check one final time.
+ resource_pool->unuse_glsl_program(master_program_num);
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+ expect_equal(data, out_data, 3, 2);
+}
+
+TEST(ComputeShaderTest, Identity) {
+ float data[] = {
+ 0.0f, 0.25f, 0.3f,
+ 0.75f, 1.0f, 1.0f,
+ };
+ float out_data[6];
+ EffectChainTester tester(data, 3, 2, FORMAT_GRAYSCALE, COLORSPACE_sRGB, GAMMA_LINEAR);
+ if (!movit_compute_shaders_supported) {
+ fprintf(stderr, "Skipping test; no support for compile shaders.\n");
+ return;
+ }
+ tester.get_chain()->add_effect(new IdentityComputeEffect());
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ expect_equal(data, out_data, 3, 2);
+}
+
+// Like IdentityComputeEffect, but due to the alpha handling, this will be
+// the very last effect in the chain, which means we can't output it directly
+// to the screen.
+class IdentityAlphaComputeEffect : public IdentityComputeEffect {
+ AlphaHandling alpha_handling() const { return DONT_CARE_ALPHA_TYPE; }
+};
+
+TEST(ComputeShaderTest, LastEffectInChain) {
+ float data[] = {
+ 0.0f, 0.25f, 0.3f,
+ 0.75f, 1.0f, 1.0f,
+ };
+ float out_data[6];
+ EffectChainTester tester(data, 3, 2, FORMAT_GRAYSCALE, COLORSPACE_sRGB, GAMMA_LINEAR);
+ if (!movit_compute_shaders_supported) {
+ fprintf(stderr, "Skipping test; no support for compile shaders.\n");
+ return;
+ }
+ tester.get_chain()->add_effect(new IdentityAlphaComputeEffect());
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ expect_equal(data, out_data, 3, 2);
+}
+
+TEST(ComputeShaderTest, Render8BitTo8Bit) {
+ uint8_t data[] = {
+ 14, 200, 80,
+ 90, 100, 110,
+ };
+ uint8_t out_data[6];
+ EffectChainTester tester(nullptr, 3, 2, FORMAT_GRAYSCALE, COLORSPACE_sRGB, GAMMA_LINEAR, GL_RGBA8);
+ if (!movit_compute_shaders_supported) {
+ fprintf(stderr, "Skipping test; no support for compile shaders.\n");
+ return;
+ }
+ tester.add_input(data, FORMAT_GRAYSCALE, COLORSPACE_sRGB, GAMMA_LINEAR, 3, 2);
+ tester.get_chain()->add_effect(new IdentityAlphaComputeEffect());
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ expect_equal(data, out_data, 3, 2);
+}
+
+// A compute shader to mirror the inputs, in 2x2 blocks.
+class MirrorComputeEffect : public Effect {
+public:
+ MirrorComputeEffect() {}
+ string effect_type_id() const override { return "MirrorComputeEffect"; }
+ bool is_compute_shader() const override { return true; }
+ string output_fragment_shader() override { return read_file("mirror.comp"); }
+ void get_compute_dimensions(unsigned output_width, unsigned output_height,
+ unsigned *x, unsigned *y, unsigned *z) const override {
+ *x = output_width / 2;
+ *y = output_height / 2;
+ *z = 1;
+ }
+};
+
+TEST(ComputeShaderTest, ComputeThenOneToOne) {
+ float data[] = {
+ 0.0f, 0.25f, 0.3f, 0.8f,
+ 0.75f, 1.0f, 1.0f, 0.2f,
+ };
+ float expected_data[] = {
+ 0.8f, 0.3f, 0.25f, 0.0f,
+ 0.2f, 1.0f, 1.0f, 0.75f,
+ };
+ float out_data[8];
+ EffectChainTester tester(data, 4, 2, FORMAT_GRAYSCALE, COLORSPACE_sRGB, GAMMA_LINEAR);
+ tester.get_chain()->add_effect(new MirrorComputeEffect());
+ tester.get_chain()->add_effect(new OneToOneEffect());
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ expect_equal(expected_data, out_data, 4, 2);
+}
+
+// A compute shader that also resizes its input, taking the upper-left pixel
+// of every 2x2 group. (The shader is hard-coded to 4x2 input for simplicity.)
+class Downscale2xComputeEffect : public Effect {
+public:
+ Downscale2xComputeEffect() {}
+ string effect_type_id() const override { return "Downscale2xComputeEffect"; }
+ bool is_compute_shader() const override { return true; }
+ string output_fragment_shader() override { return read_file("downscale2x.comp"); }
+ bool changes_output_size() const override { return true; }
+ void inform_input_size(unsigned input_num, unsigned width, unsigned height) override
+ {
+ this->width = width;
+ this->height = height;
+ }
+ void get_output_size(unsigned *width, unsigned *height,
+ unsigned *virtual_width, unsigned *virtual_height) const override {
+ *width = *virtual_width = this->width / 2;
+ *height = *virtual_height = this->height / 2;
+ }
+
+private:
+ unsigned width, height;
+};
+
+// Even if the compute shader is not the last effect, it's the one that should decide
+// the output size of the phase.
+TEST(ComputeShaderTest, ResizingComputeThenOneToOne) {
+ float data[] = {
+ 0.0f, 0.25f, 0.3f, 0.8f,
+ 0.75f, 1.0f, 1.0f, 0.2f,
+ };
+ float expected_data[] = {
+ 0.0f, 0.3f,
+ };
+ float out_data[2];
+ EffectChainTester tester(nullptr, 2, 1);
+ tester.add_input(data, FORMAT_GRAYSCALE, COLORSPACE_sRGB, GAMMA_LINEAR, 4, 2);
+
+ RewritingEffect<Downscale2xComputeEffect> *downscale_effect = new RewritingEffect<Downscale2xComputeEffect>();
+ tester.get_chain()->add_effect(downscale_effect);
+ tester.get_chain()->add_effect(new OneToOneEffect());
+ tester.get_chain()->add_effect(new BouncingIdentityEffect());
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ expect_equal(expected_data, out_data, 2, 1);
+
+ Phase *phase = downscale_effect->replaced_node->containing_phase;
+ EXPECT_EQ(2u, phase->output_width);
+ EXPECT_EQ(1u, phase->output_height);
+}
+
+class StrongOneToOneAddEffect : public AddEffect {
+public:
+ StrongOneToOneAddEffect() {}
+ string effect_type_id() const override { return "StrongOneToOneAddEffect"; }
+ bool strong_one_to_one_sampling() const override { return true; }
+};
+
+TEST(ComputeShaderTest, NoTwoComputeInSamePhase) {
+ float data[] = {
+ 0.0f, 0.25f, 0.3f, 0.8f,
+ 0.75f, 1.0f, 1.0f, 0.2f,
+ };
+ float expected_data[] = {
+ 0.0f, 0.3f,
+ };
+ float out_data[2];
+
+ ImageFormat format;
+ format.color_space = COLORSPACE_sRGB;
+ format.gamma_curve = GAMMA_LINEAR;
+
+ EffectChainTester tester(nullptr, 2, 1);
+
+ FlatInput *input1 = new FlatInput(format, FORMAT_GRAYSCALE, GL_FLOAT, 4, 2);
+ input1->set_pixel_data(data);
+ tester.get_chain()->add_input(input1);
+ Effect *downscale1 = tester.get_chain()->add_effect(new Downscale2xComputeEffect());
+
+ FlatInput *input2 = new FlatInput(format, FORMAT_GRAYSCALE, GL_FLOAT, 4, 2);
+ input2->set_pixel_data(data);
+ tester.get_chain()->add_input(input2);
+ Effect *downscale2 = tester.get_chain()->add_effect(new Downscale2xComputeEffect());
+
+ tester.get_chain()->add_effect(new StrongOneToOneAddEffect(), downscale1, downscale2);
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+ expect_equal(expected_data, out_data, 2, 1);
+}
+
+// Like the previous test, but the adder effect is not directly connected
+// to the compute shaders (so the status has to be propagated through those effects).
+TEST(ComputeShaderTest, NoTwoComputeInSamePhaseIndirect) {
+ float data[] = {
+ 0.0f, 0.25f, 0.3f, 0.8f,
+ 0.75f, 1.0f, 1.0f, 0.2f,
+ };
+ float expected_data[] = {
+ 0.0f, 0.3f,
+ };
+ float out_data[2];
+
+ ImageFormat format;
+ format.color_space = COLORSPACE_sRGB;
+ format.gamma_curve = GAMMA_LINEAR;
+
+ EffectChainTester tester(nullptr, 2, 1);
+
+ FlatInput *input1 = new FlatInput(format, FORMAT_GRAYSCALE, GL_FLOAT, 4, 2);
+ input1->set_pixel_data(data);
+ tester.get_chain()->add_input(input1);
+ tester.get_chain()->add_effect(new Downscale2xComputeEffect());
+ Effect *identity1 = tester.get_chain()->add_effect(new OneToOneEffect());
+
+ FlatInput *input2 = new FlatInput(format, FORMAT_GRAYSCALE, GL_FLOAT, 4, 2);
+ input2->set_pixel_data(data);
+ tester.get_chain()->add_input(input2);
+ tester.get_chain()->add_effect(new Downscale2xComputeEffect());
+ Effect *identity2 = tester.get_chain()->add_effect(new OneToOneEffect());
+
+ tester.get_chain()->add_effect(new StrongOneToOneAddEffect(), identity1, identity2);
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+ expect_equal(expected_data, out_data, 2, 1);
+}
+
+// Like the previous test, but the adder is not strong one-to-one
+// (so there are two different compute shader inputs, but none of them
+// are in the same phase).
+TEST(ComputeShaderTest, BounceTextureFromTwoComputeShaders) {
+ float data[] = {
+ 0.0f, 0.25f, 0.3f, 0.8f,
+ 0.75f, 1.0f, 1.0f, 0.2f,
+ };
+ float expected_data[] = {
+ 0.0f, 0.3f,
+ };
+ float out_data[2];
+
+ ImageFormat format;
+ format.color_space = COLORSPACE_sRGB;
+ format.gamma_curve = GAMMA_LINEAR;
+
+ EffectChainTester tester(nullptr, 2, 1);
+
+ FlatInput *input1 = new FlatInput(format, FORMAT_GRAYSCALE, GL_FLOAT, 4, 2);
+ input1->set_pixel_data(data);
+ tester.get_chain()->add_input(input1);
+ tester.get_chain()->add_effect(new Downscale2xComputeEffect());
+ Effect *identity1 = tester.get_chain()->add_effect(new OneToOneEffect());
+
+ FlatInput *input2 = new FlatInput(format, FORMAT_GRAYSCALE, GL_FLOAT, 4, 2);
+ input2->set_pixel_data(data);
+ tester.get_chain()->add_input(input2);
+ tester.get_chain()->add_effect(new Downscale2xComputeEffect());
+ Effect *identity2 = tester.get_chain()->add_effect(new OneToOneEffect());
+
+ tester.get_chain()->add_effect(new AddEffect(), identity1, identity2);
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+ expect_equal(expected_data, out_data, 2, 1);
+}
+
+// Requires mipmaps, but is otherwise like IdentityEffect.
+class MipmapNeedingIdentityEffect : public IdentityEffect {
+public:
+ MipmapNeedingIdentityEffect() {}
+ MipmapRequirements needs_mipmaps() const override { return NEEDS_MIPMAPS; }
+ string effect_type_id() const override { return "MipmapNeedingIdentityEffect"; }
+ bool strong_one_to_one_sampling() const override { return true; }
+};
+
+TEST(ComputeShaderTest, StrongOneToOneButStillNotChained) {
+ float data[] = {
+ 0.0f, 0.25f, 0.3f, 0.8f,
+ 0.75f, 1.0f, 1.0f, 0.2f,
+ };
+ float out_data[8];
+
+ ImageFormat format;
+ format.color_space = COLORSPACE_sRGB;
+ format.gamma_curve = GAMMA_LINEAR;
+
+ EffectChainTester tester(nullptr, 4, 2);
+
+ FlatInput *input1 = new FlatInput(format, FORMAT_GRAYSCALE, GL_FLOAT, 4, 2);
+ input1->set_pixel_data(data);
+ tester.get_chain()->add_input(input1);
+ Effect *compute_effect = tester.get_chain()->add_effect(new IdentityComputeEffect());
+
+ FlatInput *input2 = new FlatInput(format, FORMAT_GRAYSCALE, GL_FLOAT, 4, 2);
+ input2->set_pixel_data(data);
+ tester.get_chain()->add_input(input2);
+
+ // Not chained with the compute shader because MipmapNeedingIdentityEffect comes in
+ // the same phase, and compute shaders cannot supply mipmaps.
+ tester.get_chain()->add_effect(new StrongOneToOneAddEffect(), compute_effect, input2);
+ tester.get_chain()->add_effect(new MipmapNeedingIdentityEffect());
+
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+ expect_equal(data, out_data, 4, 2);
+}
+
+TEST(EffectChainTest, BounceResetsMipmapNeeds) {
+ float data[] = {
+ 0.0f, 0.25f,
+ 0.75f, 1.0f,
+ };
+ float out_data[1];
+
+ ImageFormat format;
+ format.color_space = COLORSPACE_sRGB;
+ format.gamma_curve = GAMMA_LINEAR;
+
+ NonMipmapCapableInput *input = new NonMipmapCapableInput(format, FORMAT_GRAYSCALE, GL_FLOAT, 2, 2);
+ input->set_pixel_data(data);
+
+ RewritingEffect<IdentityEffect> *identity = new RewritingEffect<IdentityEffect>();
+
+ RewritingEffect<ResizeEffect> *downscale = new RewritingEffect<ResizeEffect>(); // Needs mipmaps.
+ ASSERT_TRUE(downscale->effect->set_int("width", 1));
+ ASSERT_TRUE(downscale->effect->set_int("height", 1));
+
+ EffectChainTester tester(nullptr, 1, 1);
+ tester.get_chain()->add_input(input);
+ tester.get_chain()->add_effect(identity);
+ tester.get_chain()->add_effect(downscale);
+ tester.run(out_data, GL_RED, COLORSPACE_sRGB, GAMMA_LINEAR);
+
+ Node *input_node = identity->replaced_node->incoming_links[0];
+
+ // The ResizeEffect needs mipmaps. Normally, that would mean that it should
+ // propagate this tatus down through the IdentityEffect. However, since we
+ // bounce (due to the resize), the dependency breaks there, and we don't
+ // need to bounce again between the input and the IdentityEffect.
+ EXPECT_EQ(input_node->containing_phase,
+ identity->replaced_node->containing_phase);
+ EXPECT_NE(identity->replaced_node->containing_phase,
+ downscale->replaced_node->containing_phase);
+}
+
+} // namespace movit