-#: modules/codec/qsv.c:56
-msgid "Enable software mode"
-msgstr ""
-
-#: modules/codec/qsv.c:57
-msgid ""
-"Allow the use of the Intel Media SDK software implementation of the codecs "
-"if no QuickSync Video hardware acceleration is present on the system."
-msgstr ""
-
-#: modules/codec/qsv.c:61
-msgid "Codec Profile"
-msgstr ""
-
-#: modules/codec/qsv.c:63
-msgid ""
-"Specify the codec profile explicitly. If you don't, the codec will determine "
-"the correct profile from other sources, such as resolution and bitrate. E.g. "
-"'high'"
-msgstr ""
-
-#: modules/codec/qsv.c:67
-msgid "Codec Level"
-msgstr ""
-
-#: modules/codec/qsv.c:69
-msgid ""
-"Specify the codec level explicitly. If you don't, the codec will determine "
-"the correct profile from other sources, such as resolution and bitrate. E.g. "
-"'4.2' for mpeg4-part10 or 'low' for mpeg2"
-msgstr ""
-
-#: modules/codec/qsv.c:73
-msgid "Group of Picture size"
-msgstr ""
-
-#: modules/codec/qsv.c:75
-msgid ""
-"Number of pictures within the current GOP (Group of Pictures); if "
-"GopPicSize=0, then the GOP size is unspecified. If GopPicSize=1, only I-"
-"frames are used."
-msgstr ""
-
-#: modules/codec/qsv.c:79
-msgid "Group of Picture Reference Distance"
-msgstr ""
-
-#: modules/codec/qsv.c:81
-msgid ""
-"Distance between I- or P- key frames; if it is zero, the GOP structure is "
-"unspecified. Note: If GopRefDist = 1, there are no B- frames used. "
-msgstr ""
-
-#: modules/codec/qsv.c:85
-msgid "Target Usage"
-msgstr ""
-
-#: modules/codec/qsv.c:86
-msgid ""
-"The target usage allow to choose between different trade-offs between "
-"quality and speed. Allowed values are : 'speed', 'balanced' and 'quality'."
-msgstr ""
-
-#: modules/codec/qsv.c:90
-msgid "IDR interval"
-msgstr ""
-
-#: modules/codec/qsv.c:92
-msgid ""
-"For H.264, IdrInterval specifies IDR-frame interval in terms of I- frames; "
-"if IdrInterval=0, then every I-frame is an IDR-frame. If IdrInterval=1, then "
-"every other I-frame is an IDR-frame, etc. For MPEG2, IdrInterval defines "
-"sequence header interval in terms of I-frames. If IdrInterval=N, SDK inserts "
-"the sequence header before every Nth I-frame. If IdrInterval=0 (default), "
-"SDK inserts the sequence header once at the beginning of the stream. "
-msgstr ""
-
-#: modules/codec/qsv.c:100
-msgid "Rate Control Method"
-msgstr ""
-
-#: modules/codec/qsv.c:102
-msgid ""
-"The rate control method to use when encoding. Can be one of 'crb', 'vbr', "
-"'qp', 'avbr'. 'qp' mode isn't supported for mpeg2"
-msgstr ""
-
-#: modules/codec/qsv.c:105
-msgid "Quantization parameter"
-msgstr ""
-
-#: modules/codec/qsv.c:106
-msgid ""
-"Quantization parameter for all types of frames. This parameters sets qpi, "
-"qpp and qpp. It has less precedence than the forementionned parameters. Used "
-"only if rc_method is 'qp'."
-msgstr ""
-
-#: modules/codec/qsv.c:110
-msgid "Quantization parameter for I-frames"
-msgstr ""
-
-#: modules/codec/qsv.c:111
-msgid ""
-"Quantization parameter for I-frames. This parameter overrides any qp set "
-"globally. Used only if rc_method is 'qp'."
-msgstr ""
-
-#: modules/codec/qsv.c:114
-msgid "Quantization parameter for P-frames"
-msgstr ""
-
-#: modules/codec/qsv.c:115
-msgid ""
-"Quantization parameter for P-frames. This parameter overrides any qp set "
-"globally. Used only if rc_method is 'qp'."
-msgstr ""
-
-#: modules/codec/qsv.c:118
-msgid "Quantization parameter for B-frames"
-msgstr ""
-
-#: modules/codec/qsv.c:119
-msgid ""
-"Quantization parameter for B-frames. This parameter overrides any qp set "
-"globally. Used only if rc_method is 'qp'."
-msgstr ""
-
-#: modules/codec/qsv.c:122
-#, fuzzy
-msgid "Maximum Bitrate"
-msgstr "ബിറ്റ് റേറ്റ്"
-
-#: modules/codec/qsv.c:123
-msgid ""
-"Defines the maximum bitrate in Kpbs (1000 bits/s) for VBR rate control "
-"method. If not set, this parameter. is computed from other sources such as "
-"bitrate, profile, level, etc."
-msgstr ""
-
-#: modules/codec/qsv.c:127
-msgid "Accuracy of RateControl"
-msgstr ""
-
-#: modules/codec/qsv.c:128
-msgid ""
-"Tolerance in percentage of the 'avbr' (Average Variable BitRate) method. (e."
-"g. 10 with a bitrate of 800 kpbs means the encoder tries not to go above "
-"880 kpbs and under 730 kpbs. The targeted accuracy is only reached after a "
-"certained convergence period. See the convergence parameter"
-msgstr ""
-
-#: modules/codec/qsv.c:134
-msgid "Convergence time of 'avbr' RateControl"
-msgstr ""
-
-#: modules/codec/qsv.c:135
-msgid ""
-"Number of 100 frames before the 'avbr' rate control method reaches the "
-"requested bitrate with the requested accuracy. See the accuracy parameter. "
-msgstr ""
-
-#: modules/codec/qsv.c:139
-msgid "Number of slices per frame"
-msgstr ""
-
-#: modules/codec/qsv.c:140
-msgid ""
-"Number of slices in each video frame; each slice contains one or more macro-"
-"block rows. If numslice is not set, the encoder may choose any slice "
-"partitioning allowed by the codec standard."
-msgstr ""
-
-#: modules/codec/qsv.c:145 modules/codec/qsv.c:146 modules/codec/x264.c:134
-msgid "Number of reference frames"
-msgstr ""
-
-#: modules/codec/qsv.c:148
-msgid "Number of parallel operations"
-msgstr ""
-
-#: modules/codec/qsv.c:149
-msgid ""
-"Defines the number of parallel encoding operations before we synchronise the "
-"result. Higher may result on better throughput depending on hardware. MPEG2 "
-"needs at least 1 here."
-msgstr ""
-
-#: modules/codec/qsv.c:193
-msgid "Intel QuickSync Video encoder for MPEG4-Part10/MPEG2 (aka H.264/H.262)"
-msgstr ""
-