+#: modules/stream_out/transcode.c:116
+msgid ""
+"This is the subtitles encoder module that will be used (and its associated "
+"options)."
+msgstr "将要使用的字幕编码器 (及其相关选项)。"
+
+#: modules/stream_out/transcode.c:118
+msgid "Destination subtitles codec"
+msgstr "目的字幕编码器"
+
+#: modules/stream_out/transcode.c:120
+msgid "This is the subtitles codec that will be used."
+msgstr "这是要使用的字幕编解码器。"
+
+#: modules/stream_out/transcode.c:124
+msgid ""
+"This allows you to add overlays (also known as \"subpictures\" on the "
+"transcoded video stream. The subpictures produced by the filters will be "
+"overlayed directly onto the video. You must specify a comma-separated list "
+"of subpicture modules"
+msgstr ""
+
+#: modules/stream_out/transcode.c:129 modules/video_filter/osdmenu.c:135
+msgid "OSD menu"
+msgstr "OSD 菜单"
+
+#: modules/stream_out/transcode.c:131
+msgid ""
+"Stream the On Screen Display menu (using the osdmenu subpicture module)."
+msgstr ""
+
+#: modules/stream_out/transcode.c:133
+msgid "Number of threads"
+msgstr "线程数量"
+
+#: modules/stream_out/transcode.c:135
+msgid "Number of threads used for the transcoding."
+msgstr "转码时要使用的线程数量。"
+
+#: modules/stream_out/transcode.c:136
+msgid "High priority"
+msgstr "高优先级"
+
+#: modules/stream_out/transcode.c:138
+msgid ""
+"Runs the optional encoder thread at the OUTPUT priority instead of VIDEO."
+msgstr ""
+
+#: modules/stream_out/transcode.c:141
+msgid "Synchronise on audio track"
+msgstr "在音轨上同步"
+
+#: modules/stream_out/transcode.c:143
+msgid ""
+"This option will drop/duplicate video frames to synchronise the video track "
+"on the audio track."
+msgstr ""
+
+#: modules/stream_out/transcode.c:147
+msgid ""
+"The transcoder will drop frames if your CPU can't keep up with the encoding "
+"rate."
+msgstr ""
+
+#: modules/stream_out/transcode.c:162
+msgid "Transcode stream output"
+msgstr "转码串流输出"
+
+#: modules/stream_out/transcode.c:216
+msgid "Overlays/Subtitles"
+msgstr "覆盖/字幕"
+
+#: modules/stream_out/transrate/transrate.c:61
+msgid "MPEG2 video transrating stream output"
+msgstr "MPEG2 视频位率转换串流输出"
+
+#: modules/video_chroma/grey_yuv.c:55 modules/video_chroma/i420_ymga.c:54
+#: modules/video_chroma/i420_yuy2.c:89 modules/video_chroma/i422_i420.c:57
+#: modules/video_chroma/i422_yuy2.c:72 modules/video_chroma/yuy2_i420.c:59
+#: modules/video_chroma/yuy2_i422.c:58
+msgid "Conversions from "
+msgstr "转换来自"
+
+#: modules/video_chroma/i420_rgb.c:73
+msgid "I420,IYUV,YV12 to RGB2,RV15,RV16,RV24,RV32 conversions"
+msgstr "I420,IYUV,YV12 到 RGB2,RV15,RV16,RV24,RV32 的转换"
+
+#: modules/video_chroma/i420_rgb.c:77
+msgid "MMX I420,IYUV,YV12 to RV15,RV16,RV24,RV32 conversions"
+msgstr "MMX I420,IYUV,YV12 到 RV15,RV16,RV24,RV32 的会话"
+
+#: modules/video_chroma/i420_rgb.c:82
+#, fuzzy
+msgid "SSE2 I420,IYUV,YV12 to RV15,RV16,RV24,RV32 conversions"
+msgstr "MMX I420,IYUV,YV12 到 RV15,RV16,RV24,RV32 的会话"
+
+#: modules/video_chroma/i420_ymga.c:57 modules/video_chroma/i420_yuy2.c:92
+#: modules/video_chroma/i422_yuy2.c:75
+msgid "MMX conversions from "
+msgstr "MMX 转换来自"
+
+#: modules/video_chroma/i420_yuy2.c:96 modules/video_chroma/i422_yuy2.c:79
+#, fuzzy
+msgid "SSE2 conversions from "
+msgstr "MMX 转换来自"
+
+#: modules/video_chroma/i420_yuy2.c:101
+msgid "AltiVec conversions from "
+msgstr "AntiVec 转换来自"
+
+#: modules/video_filter/adjust.c:67
+msgid ""
+"When this mode is enabled, pixels will be shown as black or white. The "
+"threshold value will be the brighness defined below."
+msgstr "如此项被启用, 像素将会以黑白的形式显示。阈值将为下面定议的亮度值。"
+
+#: modules/video_filter/adjust.c:70
+msgid "Image contrast (0-2)"
+msgstr "影像对比(0-2)"
+
+#: modules/video_filter/adjust.c:71
+msgid "Set the image contrast, between 0 and 2. Defaults to 1."
+msgstr "设置影像的对比,介于0和2之间,默认值为1"
+
+#: modules/video_filter/adjust.c:72
+msgid "Image hue (0-360)"
+msgstr "影像色调(0-360)"
+
+#: modules/video_filter/adjust.c:73
+msgid "Set the image hue, between 0 and 360. Defaults to 0."
+msgstr "设置影像的色调,介于0和360之间,默认值为0"
+
+#: modules/video_filter/adjust.c:74
+msgid "Image saturation (0-3)"
+msgstr "影像饱和度(0-3)"
+
+#: modules/video_filter/adjust.c:75
+msgid "Set the image saturation, between 0 and 3. Defaults to 1."
+msgstr "设置影像的饱和度,介于0和3之间,默认值为1"
+
+#: modules/video_filter/adjust.c:76
+msgid "Image brightness (0-2)"
+msgstr "影像亮度(0-2)"
+
+#: modules/video_filter/adjust.c:77
+msgid "Set the image brightness, between 0 and 2. Defaults to 1."
+msgstr "设置影像的亮度,介于0和2之间,默认值为1"
+
+#: modules/video_filter/adjust.c:78
+msgid "Image gamma (0-10)"
+msgstr "影像反差系数(0-10)"
+
+#: modules/video_filter/adjust.c:79
+msgid "Set the image gamma, between 0.01 and 10. Defaults to 1."
+msgstr "设置影像的反差系数,介于0.01和10之间,默认值为1"
+
+#: modules/video_filter/adjust.c:82
+msgid "Image properties filter"
+msgstr "图像属性过滤器"
+
+#: modules/video_filter/alphamask.c:40
+msgid "Use an image's alpha channel as a transparency mask."
+msgstr ""
+
+#: modules/video_filter/alphamask.c:42
+#, fuzzy
+msgid "Transparency mask"
+msgstr "透明"
+
+#: modules/video_filter/alphamask.c:44
+msgid "Alpha blending transparency mask. Use's a png alpha channel."
+msgstr ""
+
+#: modules/video_filter/alphamask.c:63
+#, fuzzy
+msgid "Alpha mask video filter"
+msgstr "修整视频过滤器"
+
+#: modules/video_filter/alphamask.c:64
+#, fuzzy
+msgid "Alpha mask"
+msgstr "修整视频过滤器"
+
+#: modules/video_filter/atmo/atmo.cpp:120
+msgid ""
+"This module allows to control an so called AtmoLight device which is "
+"connected to your computer.\n"
+"AtmoLight is the homebrew version of that what Philips calls AmbiLight.\n"
+"If you need further informations feel free to visit us at\n"
+"\n"
+"http://www.vdr-wiki.de/wiki/index.php/Atmo-plugin\n"
+"http://www.vdr-wiki.de/wiki/index.php/AtmoWin\n"
+"\n"
+"there you will find detailed descriptions how to build it for your self and "
+"where you can get the required parts and so on.\n"
+" There you can also see pictures and some movies showing such a device in "
+"live action..."
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:133
+#, fuzzy
+msgid "Save Debug Frames"
+msgstr "帧率"
+
+#: modules/video_filter/atmo/atmo.cpp:134
+msgid "Writes every 128th miniframe to a folder."
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:135
+msgid "Debug Frame Folder"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:136
+msgid "defines the path where the debugframes should be saved"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:140
+#, fuzzy
+msgid "Extracted Image Width"
+msgstr "图像宽度"
+
+#: modules/video_filter/atmo/atmo.cpp:141
+msgid ""
+"defines the width of the mini image for further processing (64 is default)"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:144
+#, fuzzy
+msgid "Extracted Image Height"
+msgstr "图像高度"
+
+#: modules/video_filter/atmo/atmo.cpp:145
+msgid ""
+"defines the height of the mini image for further processing (48 is default)"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:148
+#, fuzzy
+msgid "use Pause Color"
+msgstr "仅暂停"
+
+#: modules/video_filter/atmo/atmo.cpp:149
+msgid ""
+"use the color defined below if the user paused the video.(have light to get "
+"another beer?)"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:151
+#, fuzzy
+msgid "Pause-Red"
+msgstr "暂停"
+
+#: modules/video_filter/atmo/atmo.cpp:152
+msgid "the red component of pause color"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:153
+#, fuzzy
+msgid "Pause-Green"
+msgstr "绿色"
+
+#: modules/video_filter/atmo/atmo.cpp:154
+msgid "the green component of pause color"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:155
+#, fuzzy
+msgid "Pause-Blue"
+msgstr "暂停"
+
+#: modules/video_filter/atmo/atmo.cpp:156
+msgid "the blue component of pause color"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:157
+msgid "Pause-Fadesteps"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:158
+msgid ""
+"Number of steps to change current color to pause color (each step takes 40ms)"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:161
+#, fuzzy
+msgid "End-Red"
+msgstr "红色"
+
+#: modules/video_filter/atmo/atmo.cpp:162
+msgid "the red component of the shutdown color"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:163
+#, fuzzy
+msgid "End-Green"
+msgstr "绿色"
+
+#: modules/video_filter/atmo/atmo.cpp:164
+msgid "the green component of the shutdown color"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:165
+#, fuzzy
+msgid "End-Blue"
+msgstr "蓝色"
+
+#: modules/video_filter/atmo/atmo.cpp:166
+msgid "the blue component of the shutdown color"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:167
+msgid "End-Fadesteps"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:168
+msgid ""
+"Number of steps to change current color to end color for dimming up the "
+"light in cinema style... (each step takes 40ms)"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:172
+msgid "Use Software White adjust"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:173
+msgid ""
+"Should the buildin driver do a white adjust or you LED stripes? recommend."
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:175
+#, fuzzy
+msgid "White Red"
+msgstr "白色"
+
+#: modules/video_filter/atmo/atmo.cpp:176
+msgid "Red value of a pure white on your LED stripes."
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:178
+#, fuzzy
+msgid "White Green"
+msgstr "白色"
+
+#: modules/video_filter/atmo/atmo.cpp:179
+msgid "Green value of a pure white on your LED stripes."
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:181
+#, fuzzy
+msgid "White Blue"
+msgstr "白色"
+
+#: modules/video_filter/atmo/atmo.cpp:182
+msgid "Blue value of a pure white on your LED stripes."
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:185
+msgid "Serial Port/Device"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:186
+msgid ""
+"Name of the serial port where the AtmoLight controller is attached to\n"
+" on Windows usually something like COM1 or COM2 on Linux /dev/ttyS01 f.e."
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:190
+msgid "Edge Weightning"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:191
+msgid ""
+"increasing this value will result in color more depending on the border of "
+"the frame"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:194
+msgid "overall Brightness of you LED stripes"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:195
+#, fuzzy
+msgid "Darkness Limit"
+msgstr "边界遮掩"
+
+#: modules/video_filter/atmo/atmo.cpp:196
+msgid ""
+"pixels with a saturation lower than this will be ignored should be greater "
+"than one for letterboxed videos"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:199
+msgid "Hue windowing"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:200
+#: modules/video_filter/atmo/atmo.cpp:202
+#, fuzzy
+msgid "used for statistics"
+msgstr "收集统计信息"
+
+#: modules/video_filter/atmo/atmo.cpp:201
+msgid "Sat windowing"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:204
+#, fuzzy
+msgid "Filter length (ms)"
+msgstr "过滤器"
+
+#: modules/video_filter/atmo/atmo.cpp:205
+msgid "Time it takes until a color is complete changed, removes flickering"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:207
+#, fuzzy
+msgid "Filter threshold"
+msgstr "阈值"
+
+#: modules/video_filter/atmo/atmo.cpp:208
+msgid "How much a color must changed, for an imediate color change"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:210
+msgid "Filter Smoothness %"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:211
+msgid "Filter Smoothness"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:213
+#, fuzzy
+msgid "Filtermode"
+msgstr "过滤器"
+
+#: modules/video_filter/atmo/atmo.cpp:214
+msgid "kind of filtering which should be use to calcuate the color output"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:222
+#, fuzzy
+msgid "No Filtering"
+msgstr "过滤器"
+
+#: modules/video_filter/atmo/atmo.cpp:223
+#, fuzzy
+msgid "Combined"
+msgstr "编译者 "
+
+#: modules/video_filter/atmo/atmo.cpp:224
+#, fuzzy
+msgid "Percent"
+msgstr "预解释"
+
+#: modules/video_filter/atmo/atmo.cpp:227
+#, fuzzy
+msgid "Framedelay"
+msgstr "帧率"
+
+#: modules/video_filter/atmo/atmo.cpp:228
+msgid ""
+"helps to get video out and light effects insync values around 20ms should do "
+"the trick"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:232
+#, fuzzy
+msgid "Channel summary"
+msgstr "频道混音器"
+
+#: modules/video_filter/atmo/atmo.cpp:233
+#, fuzzy
+msgid "Channel left"
+msgstr "频道名称"
+
+#: modules/video_filter/atmo/atmo.cpp:234
+#, fuzzy
+msgid "Channel right"
+msgstr "频道"
+
+#: modules/video_filter/atmo/atmo.cpp:235
+#, fuzzy
+msgid "Channel top"
+msgstr "频道"
+
+#: modules/video_filter/atmo/atmo.cpp:236
+#, fuzzy
+msgid "Channel bottom"
+msgstr "频道名称"
+
+#: modules/video_filter/atmo/atmo.cpp:238
+msgid "maps the hardware channel X to logical channel Y to fix wrong wiring:-)"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:249
+#, fuzzy
+msgid "disabled"
+msgstr "关闭"
+
+#: modules/video_filter/atmo/atmo.cpp:250
+#, fuzzy
+msgid "summary"
+msgstr "摘要"
+
+#: modules/video_filter/atmo/atmo.cpp:251
+#, fuzzy
+msgid "left"
+msgstr "左"
+
+#: modules/video_filter/atmo/atmo.cpp:252
+#, fuzzy
+msgid "right"
+msgstr "右"
+
+#: modules/video_filter/atmo/atmo.cpp:253
+#, fuzzy
+msgid "top"
+msgstr "停止"
+
+#: modules/video_filter/atmo/atmo.cpp:254
+#, fuzzy
+msgid "bottom"
+msgstr "底部"
+
+#: modules/video_filter/atmo/atmo.cpp:257
+msgid "summary gradient"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:258
+#, fuzzy
+msgid "left gradient"
+msgstr "灰度"
+
+#: modules/video_filter/atmo/atmo.cpp:259
+#, fuzzy
+msgid "right gradient"
+msgstr "灰度"
+
+#: modules/video_filter/atmo/atmo.cpp:260
+#, fuzzy
+msgid "top gradient"
+msgstr "灰度"
+
+#: modules/video_filter/atmo/atmo.cpp:261
+#, fuzzy
+msgid "bottom gradient"
+msgstr "灰度"
+
+#: modules/video_filter/atmo/atmo.cpp:262
+msgid ""
+"defines a small bitmap with 64x48 pixels, containing a grayscale gradient"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:266
+#, fuzzy
+msgid "Filename of AtmoWinA.exe"
+msgstr "文件名称"
+
+#: modules/video_filter/atmo/atmo.cpp:267
+msgid ""
+"if you wan't that the AtmoLight control software is launched by\n"
+"VLC enter the complete Filename of AtmoWinA.exe here"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:270
+msgid "Use buildin AtmoLight"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:271
+msgid ""
+"VideoLan will directly use your AtmoLight hardware without running the "
+"external AtmoWinA.exe Userspace driver."
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:282
+msgid "AtmoLight Filter"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:284
+msgid "AtmoLight"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:291
+msgid "Choose between the buildin AtmoLight driver or the external"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:310
+msgid "Enter connection of your AtmoLight hardware"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:319
+msgid "Illuminate the room with this color on pause"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:335
+msgid "Illuminate the room with this color on shutdown"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:351
+msgid "Settings only for buildin Live Video Processor"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:388
+msgid "Change channel assignment (fixes wrong wiring)"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:417
+msgid "Adjust the white light to your LED stripes"
+msgstr ""
+
+#: modules/video_filter/atmo/atmo.cpp:439
+msgid "Change gradients"
+msgstr ""
+
+#: modules/video_filter/blendbench.c:52
+#, fuzzy
+msgid "Number of time to blend"
+msgstr "频带数量"
+
+#: modules/video_filter/blendbench.c:53
+#, fuzzy
+msgid "The number of time the blend will be performed"
+msgstr "相同的输入将要被重复的时间"
+
+#: modules/video_filter/blendbench.c:55
+#, fuzzy
+msgid "Alpha of the blended image"
+msgstr "X 坐标"
+
+#: modules/video_filter/blendbench.c:56
+msgid "Alpha with which the blend image is blended"
+msgstr ""
+
+#: modules/video_filter/blendbench.c:58
+msgid "Image to be blended onto"
+msgstr ""
+
+#: modules/video_filter/blendbench.c:59
+#, fuzzy
+msgid "The image which will be used to blend onto"
+msgstr "用于这个连接的用户代理。"
+
+#: modules/video_filter/blendbench.c:61
+#, fuzzy
+msgid "Chroma for the base image"
+msgstr "获取图像"
+
+#: modules/video_filter/blendbench.c:62
+msgid "Chroma which the base image will be loaded in"
+msgstr ""
+
+#: modules/video_filter/blendbench.c:64
+msgid "Image which will be blended."
+msgstr ""
+
+#: modules/video_filter/blendbench.c:65
+msgid "The image blended onto the base image"
+msgstr ""
+
+#: modules/video_filter/blendbench.c:67
+#, fuzzy
+msgid "Chroma for the blend image"
+msgstr "获取图像"
+
+#: modules/video_filter/blendbench.c:68
+msgid "Chroma which the blend image will be loadedin"
+msgstr ""
+
+#: modules/video_filter/blendbench.c:74
+msgid "Blending benchmark filter"
+msgstr ""
+
+#: modules/video_filter/blendbench.c:75
+msgid "blendbench"
+msgstr ""
+
+#: modules/video_filter/blendbench.c:80
+#, fuzzy
+msgid "Benchmarking"
+msgstr "边界遮掩"
+
+#: modules/video_filter/blendbench.c:86
+#, fuzzy
+msgid "Base image"
+msgstr "Feed 图像"
+
+#: modules/video_filter/blendbench.c:92
+#, fuzzy
+msgid "Blend image"
+msgstr "Feed 图像"
+
+#: modules/video_filter/blend.c:100
+msgid "Video pictures blending"
+msgstr "视频图片混合"
+
+#: modules/video_filter/bluescreen.c:39
+msgid ""
+"This effect, also known as \"greenscreen\" or \"chroma key\" blends the "
+"\"blue parts\" of the foreground image of the mosaic on the background (like "
+"weather forcasts). You can choose the \"key\" color for blending (blyyue by "
+"default)."
+msgstr ""
+
+#: modules/video_filter/bluescreen.c:44
+msgid "Bluescreen U value"
+msgstr "蓝屏 U 值"
+
+#: modules/video_filter/bluescreen.c:46
+msgid ""
+"\"U\" value for the bluescreen key color (in YUV values). From 0 to 255. "
+"Defaults to 120 for blue."
+msgstr ""
+
+#: modules/video_filter/bluescreen.c:48
+msgid "Bluescreen V value"
+msgstr "蓝屏 V 值"
+
+#: modules/video_filter/bluescreen.c:50
+msgid ""
+"\"V\" value for the bluescreen key color (in YUV values). From 0 to 255. "
+"Defaults to 90 for blue."
+msgstr ""
+
+#: modules/video_filter/bluescreen.c:52
+msgid "Bluescreen U tolerance"
+msgstr "蓝屏 U 容忍度"
+
+#: modules/video_filter/bluescreen.c:54
+msgid ""
+"Tolerance of the bluescreen blender on color variations for the U plane. A "
+"value between 10 and 20 seems sensible."
+msgstr ""
+
+#: modules/video_filter/bluescreen.c:57
+msgid "Bluescreen V tolerance"
+msgstr "蓝屏 V 容忍度"
+
+#: modules/video_filter/bluescreen.c:59
+msgid ""
+"Tolerance of the bluescreen blender on color variations for the V plane. A "
+"value between 10 and 20 seems sensible."
+msgstr ""
+
+#: modules/video_filter/bluescreen.c:79
+#, fuzzy
+msgid "Bluescreen video filter"
+msgstr "修整视频过滤器"
+
+#: modules/video_filter/bluescreen.c:80
+msgid "Bluescreen"
+msgstr "蓝屏"
+
+#: modules/video_filter/chain.c:43
+msgid "Video filtering using a chain of video filter modules"
+msgstr ""
+
+#: modules/video_filter/clone.c:59
+msgid "Number of video windows in which to clone the video."
+msgstr "选择复制视频的窗口的数目。"
+
+#: modules/video_filter/clone.c:62
+msgid "Video output modules"
+msgstr "视频输出模块"
+
+#: modules/video_filter/clone.c:63
+msgid ""
+"You can use specific video output modules for the clones. Use a comma-"
+"separated list of modules."
+msgstr ""
+
+#: modules/video_filter/clone.c:69
+msgid "Clone video filter"
+msgstr "复制视频过滤器"
+
+#: modules/video_filter/colorthres.c:55
+#, fuzzy
+msgid ""
+"Colors similar to this will be kept, others will be grayscaled. This must be "
+"an hexadecimal (like HTML colors). The first two chars are for red, then "
+"green, then blue. #000000 = black, #FF0000 = red, #00FF00 = green, #FFFF00 = "
+"yellow (red + green), #FFFFFF = white"
+msgstr ""
+"将被在视频上渲染的文字颜色。这必须是一个十六进制数 (像 HTML 颜色一样)。前两位"
+"是红色,然后是绿色,然后是蓝色。#000000 = 黑, #FF0000 = 红, #00FF00 = 绿, "
+"#FFFF00 = 黄 (红 + 绿), #FFFFFF = 白"
+
+#: modules/video_filter/colorthres.c:68
+#, fuzzy
+msgid "Color threshold filter"
+msgstr "复制视频过滤器"
+
+#: modules/video_filter/colorthres.c:77
+#, fuzzy
+msgid "Saturaton threshold"
+msgstr "亮度阈值"
+
+#: modules/video_filter/colorthres.c:79
+#, fuzzy
+msgid "Similarity threshold"
+msgstr "阈值"
+
+#: modules/video_filter/crop.c:73
+msgid "Crop geometry (pixels)"
+msgstr "修剪几何图形 (像素)"
+
+#: modules/video_filter/crop.c:74
+msgid ""
+"Set the geometry of the zone to crop. This is set as <width> x <height> + "
+"<left offset> + <top offset>."
+msgstr ""
+"设置要修剪的区域的几何图形。此项应以 <宽度> x <高度> + <左偏移值> + <右偏移值"
+"> 的形式来设置。"
+
+#: modules/video_filter/crop.c:76
+msgid "Automatic cropping"
+msgstr "自动修整"
+
+#: modules/video_filter/crop.c:77
+#, fuzzy
+msgid "Automatically detect black borders and crop them."
+msgstr "自动黑边修整。"
+
+#: modules/video_filter/crop.c:80
+msgid "Ratio max (x 1000)"
+msgstr ""
+
+#: modules/video_filter/crop.c:81
+msgid ""
+"Maximum image ratio. The crop plugin will never automatically crop to a "
+"higher ratio (ie, to a more \"flat\" image). The value is x1000: 1333 means "
+"4/3."
+msgstr ""
+
+#: modules/video_filter/crop.c:83
+#, fuzzy
+msgid "Manual ratio"
+msgstr "手动增加"
+
+#: modules/video_filter/crop.c:84
+msgid "Force a ratio (0 for automatic). Value is x1000: 1333 means 4/3."
+msgstr ""
+
+#: modules/video_filter/crop.c:86
+#, fuzzy
+msgid "Number of images for change"
+msgstr "输出频道数量"
+
+#: modules/video_filter/crop.c:87
+msgid ""
+"The number of consecutive images with the same detected ratio (different "
+"from the previously detected ratio) to consider that ratio chnged and "
+"trigger recrop."
+msgstr ""
+
+#: modules/video_filter/crop.c:89
+#, fuzzy
+msgid "Number of lines for change"
+msgstr "输出频道数量"
+
+#: modules/video_filter/crop.c:90
+msgid ""
+"The minimum difference in the number of detected black lines to consider "
+"that ratio changed and trigger recrop."
+msgstr ""
+
+#: modules/video_filter/crop.c:92
+#, fuzzy
+msgid "Number of non black pixels "
+msgstr "频带间的空白像素数量"
+
+#: modules/video_filter/crop.c:93
+msgid ""
+"The maximum of non-black pixels in a line to consider that the line is black."
+msgstr ""
+
+#: modules/video_filter/crop.c:96
+msgid "Skip percentage (%)"
+msgstr ""
+
+#: modules/video_filter/crop.c:97
+msgid ""
+"Percentage of the line to consider while checking for black lines. This "
+"allows to skip logos in black borders and crop them anyway."
+msgstr ""
+
+#: modules/video_filter/crop.c:99
+#, fuzzy
+msgid "Luminance threshold "
+msgstr "亮度阈值"
+
+#: modules/video_filter/crop.c:100
+msgid "Maximum luminance to consider a pixel as black (0-255)."
+msgstr ""
+
+#: modules/video_filter/crop.c:104
+msgid "Crop video filter"
+msgstr "修整视频过滤器"
+
+#: modules/video_filter/crop.c:378 modules/video_filter/crop.c:472
+#, fuzzy
+msgid "Cropping failed"
+msgstr "修整视频过滤器"
+
+#: modules/video_filter/crop.c:379 modules/video_filter/crop.c:473
+#, fuzzy
+msgid "VLC could not open the video output module."
+msgstr "视频输入色彩."
+
+#: modules/video_filter/croppadd.c:47
+#, fuzzy
+msgid "Pixels to crop from top"
+msgstr "视频修整(上方)"
+
+#: modules/video_filter/croppadd.c:49
+#, fuzzy
+msgid "Number of pixels to crop from the top of the image."
+msgstr "在视频顶部修剪一个像素"
+
+#: modules/video_filter/croppadd.c:50
+#, fuzzy
+msgid "Pixels to crop from bottom"
+msgstr "视频修整(下方)"
+
+#: modules/video_filter/croppadd.c:52
+#, fuzzy
+msgid "Number of pixels to crop from the bottom of the image."
+msgstr "在视频底部修剪一个像素"
+
+#: modules/video_filter/croppadd.c:53
+#, fuzzy
+msgid "Pixels to crop from left"
+msgstr "视频修整(左方)"
+
+#: modules/video_filter/croppadd.c:55
+#, fuzzy
+msgid "Number of pixels to crop from the left of the image."
+msgstr "在视频左侧修剪一个像素"
+
+#: modules/video_filter/croppadd.c:56
+#, fuzzy
+msgid "Pixels to crop from right"
+msgstr "视频修整(右方)"
+
+#: modules/video_filter/croppadd.c:58
+#, fuzzy
+msgid "Number of pixels to crop from the right of the image."
+msgstr "从视频右侧修剪一个像素"
+
+#: modules/video_filter/croppadd.c:60
+#, fuzzy
+msgid "Pixels to padd to top"
+msgstr "视频填补(上方)"
+
+#: modules/video_filter/croppadd.c:62
+#, fuzzy
+msgid "Number of pixels to padd to the top of the image after cropping."
+msgstr "在视频顶部修剪一个像素"
+
+#: modules/video_filter/croppadd.c:63
+#, fuzzy
+msgid "Pixels to padd to bottom"
+msgstr "视频填补(下方)"
+
+#: modules/video_filter/croppadd.c:65
+#, fuzzy
+msgid "Number of pixels to padd to the bottom of the image after cropping."
+msgstr "在视频底部修剪一个像素"
+
+#: modules/video_filter/croppadd.c:66
+#, fuzzy
+msgid "Pixels to padd to left"
+msgstr "视频填补(左方)"
+
+#: modules/video_filter/croppadd.c:68
+#, fuzzy
+msgid "Number of pixels to padd to the left of the image after cropping."
+msgstr "在视频左侧修剪一个像素"
+
+#: modules/video_filter/croppadd.c:69
+#, fuzzy
+msgid "Pixels to padd to right"
+msgstr "视频填补(右方)"
+
+#: modules/video_filter/croppadd.c:71
+#, fuzzy
+msgid "Number of pixels to padd to the right of the image after cropping."
+msgstr "从视频右侧修剪一个像素"
+
+#: modules/video_filter/croppadd.c:79 modules/video_filter/scale.c:59
+#: modules/video_filter/swscale.c:71
+msgid "Video scaling filter"
+msgstr "视频缩放过滤器"
+
+#: modules/video_filter/croppadd.c:93
+#, fuzzy
+msgid "Padd"
+msgstr "暂停"
+
+#: modules/video_filter/deinterlace.c:112 modules/video_output/x11/xvmc.c:130
+msgid "Deinterlace mode"
+msgstr "解除交错模式"
+
+#: modules/video_filter/deinterlace.c:113
+msgid "Deinterlace method to use for local playback."
+msgstr "在本地播放中使用的解除交错的方式。"
+
+#: modules/video_filter/deinterlace.c:115
+msgid "Streaming deinterlace mode"
+msgstr "串流解除交错模式"
+
+#: modules/video_filter/deinterlace.c:116
+msgid "Deinterlace method to use for streaming."
+msgstr "在串流时所使用的解除交错模式。"
+
+#: modules/video_filter/deinterlace.c:126
+msgid "Deinterlacing video filter"
+msgstr "解除交错视频过滤器"
+
+#: modules/video_filter/dynamicoverlay/dynamicoverlay.c:58
+#, fuzzy
+msgid "Input FIFO"
+msgstr "输入"
+
+#: modules/video_filter/dynamicoverlay/dynamicoverlay.c:59
+msgid "FIFO which will be read for commands"
+msgstr ""
+
+#: modules/video_filter/dynamicoverlay/dynamicoverlay.c:61
+#, fuzzy
+msgid "Output FIFO"
+msgstr "输出"
+
+#: modules/video_filter/dynamicoverlay/dynamicoverlay.c:62
+#, fuzzy
+msgid "FIFO which will be written to for responses"
+msgstr "允许你指定视频快照的存放目录"
+
+#: modules/video_filter/dynamicoverlay/dynamicoverlay.c:65
+#, fuzzy
+msgid "Dynamic video overlay"
+msgstr "Dirac 视频译码器"
+
+#: modules/video_filter/dynamicoverlay/dynamicoverlay.c:66
+#, fuzzy
+msgid "Overlay"
+msgstr "覆盖"
+
+#: modules/video_filter/erase.c:55
+#, fuzzy
+msgid "Image mask"
+msgstr "影像调整"
+
+#: modules/video_filter/erase.c:56
+msgid "Image mask. Pixels with an alpha value greater than 50% will be erased."
+msgstr ""
+
+#: modules/video_filter/erase.c:59
+#, fuzzy
+msgid "X coordinate of the mask."
+msgstr "X 坐标"
+
+#: modules/video_filter/erase.c:61
+#, fuzzy
+msgid "Y coordinate of the mask."
+msgstr "Y 坐标"
+
+#: modules/video_filter/erase.c:66
+#, fuzzy
+msgid "Erase video filter"
+msgstr "墙视频过滤器"
+
+#: modules/video_filter/erase.c:67
+#, fuzzy
+msgid "Erase"
+msgstr "预解释"
+
+#: modules/video_filter/extract.c:63
+#, fuzzy
+msgid "RGB component to extract"
+msgstr "修整视频过滤器"
+
+#: modules/video_filter/extract.c:64
+msgid "RGB component to extract. 0 for Red, 1 for Green and 2 for Blue."
+msgstr ""
+
+#: modules/video_filter/extract.c:75
+#, fuzzy
+msgid "Extract RGB component video filter"
+msgstr "修整视频过滤器"
+
+#: modules/video_filter/filter_event_info.h:27
+#, fuzzy
+msgid "video-filter-event"
+msgstr "视频过滤器"
+
+#: modules/video_filter/gaussianblur.c:49
+msgid "Gaussian's std deviation"
+msgstr ""
+
+#: modules/video_filter/gaussianblur.c:51
+msgid ""
+"Gaussian's standard deviation. The bluring will take into account pixels up "
+"to 3*sigma away in any direction."
+msgstr ""
+
+#: modules/video_filter/gaussianblur.c:60
+#, fuzzy
+msgid "Gaussian blur video filter"
+msgstr "修整视频过滤器"
+
+#: modules/video_filter/gaussianblur.c:61
+#, fuzzy
+msgid "Gaussian Blur"
+msgstr "俄语"
+
+#: modules/video_filter/gradient.c:63
+msgid "Distort mode"
+msgstr "扭曲模式"
+
+#: modules/video_filter/gradient.c:64
+#, fuzzy
+msgid "Distort mode, one of \"gradient\", \"edge\" and \"hough\"."
+msgstr ""
+"扭曲模式, 可以为 \"wave\", \"ripple\", \"gradient\", \"edge\", \"hough\" and "
+"\"psychedelic\" 其中之一。"
+
+#: modules/video_filter/gradient.c:66
+msgid "Gradient image type"
+msgstr "灰度图像类型"
+
+#: modules/video_filter/gradient.c:67
+msgid ""
+"Gradient image type (0 or 1). 0 will turn the image to white while 1 will "
+"keep colors."
+msgstr "灰度图像类型 (0 或 1)。0 会将图像转换为白色,1 将保持颜色。"
+
+#: modules/video_filter/gradient.c:70
+msgid "Apply cartoon effect"
+msgstr "应用动画效果"
+
+#: modules/video_filter/gradient.c:71
+msgid "Apply cartoon effect. It is only used by \"gradient\" and \"edge\"."
+msgstr "应用动画效果。它只能被 \"gradient\" 和 \"edge\" 使用。"
+
+#: modules/video_filter/gradient.c:75
+msgid "Edge"
+msgstr "边缘"
+
+#: modules/video_filter/gradient.c:75
+msgid "Hough"
+msgstr "霍夫"
+
+#: modules/video_filter/gradient.c:80
+#, fuzzy
+msgid "Gradient video filter"
+msgstr "修整视频过滤器"
+
+#: modules/video_filter/grain.c:53
+#, fuzzy
+msgid "Grain video filter"
+msgstr "修整视频过滤器"
+
+#: modules/video_filter/grain.c:54
+#, fuzzy
+msgid "Grain"
+msgstr "灰度"
+
+#: modules/video_filter/imgresample.c:63
+msgid "FFmpeg video filter"
+msgstr "ffmpeg 视频过滤器"
+
+#: modules/video_filter/invert.c:51
+msgid "Invert video filter"
+msgstr "反向视频过滤器"
+
+#: modules/video_filter/invert.c:52
+msgid "Color inversion"
+msgstr "色彩反向"
+
+#: modules/video_filter/logo.c:71
+msgid "Logo filenames"
+msgstr "Logo 文件名"
+
+#: modules/video_filter/logo.c:72
+msgid ""
+"Full path of the image files to use. Format is <image>[,<delay in ms>[,"
+"<alpha>]][;<image>[,<delay>[,<alpha>]]][;...]. If you only have one file, "
+"simply enter its filename."
+msgstr ""
+
+#: modules/video_filter/logo.c:75
+msgid "Logo animation # of loops"
+msgstr "Logo 循环的动画编号"
+
+#: modules/video_filter/logo.c:76
+msgid "Number of loops for the logo animation.-1 = continuous, 0 = disabled"
+msgstr ""
+
+#: modules/video_filter/logo.c:78
+msgid "Logo individual image time in ms"
+msgstr "Logo 每个图像的时间 (毫秒)"
+
+#: modules/video_filter/logo.c:79
+msgid "Individual image display time of 0 - 60000 ms."
+msgstr "每个图像显示时间,0 - 60000 毫秒。"
+
+#: modules/video_filter/logo.c:82
+msgid "X coordinate of the logo. You can move the logo by left-clicking it."
+msgstr "Logo 的 X 坐标。您可以单击 logo 来移动它。"
+
+#: modules/video_filter/logo.c:85
+msgid "Y coordinate of the logo. You can move the logo by left-clicking it."
+msgstr "Logo 的 Y 坐标。您可以单击 logo 来移动它。"
+
+#: modules/video_filter/logo.c:87
+msgid "Transparency of the logo"
+msgstr "Logo 的透明度"
+
+#: modules/video_filter/logo.c:88
+msgid ""
+"Logo transparency value (from 0 for full transparency to 255 for full "
+"opacity)."
+msgstr "Logo 的透明度值 (0 为全透明,255 为不透明)。"
+
+#: modules/video_filter/logo.c:90
+msgid "Logo position"
+msgstr "Logo位置"
+
+#: modules/video_filter/logo.c:92
+#, fuzzy
+msgid ""
+"Enforce the logo position on the video (0=center, 1=left, 2=right, 4=top, "
+"8=bottom, you can also use combinations of these values, eg 6 = top-right)."
+msgstr ""
+"强制指定视频在其窗口中的对齐方式。默认值 0 为居中(0 = 居中,1 = 左,2 = 右,"
+"4 = 上,8 = 下,可以设置组合值,如 6 = 4 + 2 表示右上方对齐)。"
+
+#: modules/video_filter/logo.c:104
+msgid "Logo video filter"
+msgstr "Logo 视频过滤器"
+
+#: modules/video_filter/logo.c:106
+msgid "Logo overlay"
+msgstr "Logo 覆盖"
+
+#: modules/video_filter/logo.c:127
+msgid "Logo sub filter"
+msgstr "Logo 子过滤器"
+
+#: modules/video_filter/magnify.c:64
+msgid "Magnify/Zoom interactive video filter"
+msgstr "放大/缩放交互视频过滤器"
+
+#: modules/video_filter/magnify.c:65
+msgid "Magnify"
+msgstr "放大镜"
+
+#: modules/video_filter/marq.c:88
+msgid ""
+"Marquee text to display. (Available format strings: Time related: %Y = year, "
+"%m = month, %d = day, %H = hour, %M = minute, %S = second, ... Meta data "
+"related: $a = artist, $b = album, $c = copyright, $d = description, $e = "
+"encoded by, $g = genre, $l = language, $n = track num, $p = now playing, $r "
+"= rating, $s = subtitles language, $t = title, $u = url, $A = date, $B = "
+"audio bitrate (in kb/s), $C = chapter,$D = duration, $F = full name with "
+"path, $I = title, $L = time left, $N = name, $O = audio language, $P = "
+"position (in %), $R = rate, $S = audio sample rate (in kHz), $T = time, $U = "
+"publisher, $V = volume, $_ = new line) "
+msgstr ""
+
+#: modules/video_filter/marq.c:104 modules/video_filter/rss.c:143
+msgid "X offset, from the left screen edge."
+msgstr "X 偏移量,从屏幕左边界"
+
+#: modules/video_filter/marq.c:106 modules/video_filter/rss.c:145
+msgid "Y offset, down from the top."
+msgstr "Y 偏移量,从上往下"
+
+#: modules/video_filter/marq.c:107
+msgid "Timeout"
+msgstr "超时"
+
+#: modules/video_filter/marq.c:108
+msgid ""
+"Number of milliseconds the marquee must remain displayed. Default value is 0 "
+"(remains forever)."
+msgstr ""
+
+#: modules/video_filter/marq.c:111
+#, fuzzy
+msgid "Refresh period in ms"
+msgstr "刷新清单"
+
+#: modules/video_filter/marq.c:112
+msgid ""
+"Number of milliseconds between string updates. This is mainly usefull when "
+"using meta data or time format string sequences."
+msgstr ""
+
+#: modules/video_filter/marq.c:128
+msgid "Marquee position"
+msgstr "字幕位置"
+
+#: modules/video_filter/marq.c:130
+#, fuzzy
+msgid ""
+"You can enforce the marquee position on the video (0=center, 1=left, "
+"2=right, 4=top, 8=bottom, you can also use combinations of these values, eg "
+"6 = top-right)."
+msgstr ""
+"强制指定视频在其窗口中的对齐方式。默认值 0 为居中(0 = 居中,1 = 左,2 = 右,"
+"4 = 上,8 = 下,可以设置组合值,如 6 = 4 + 2 表示右上方对齐)。"
+
+#: modules/video_filter/marq.c:169 modules/video_filter/rss.c:212
+msgid "Misc"
+msgstr "杂项"
+
+#: modules/video_filter/marq.c:175
+msgid "Marquee display"
+msgstr "显示滚动字幕"
+
+#: modules/video_filter/mosaic.c:91
+msgid ""
+"Transparency of the mosaic foreground pictures. 0 means transparent, 255 "
+"opaque (default)."
+msgstr ""
+
+#: modules/video_filter/mosaic.c:95
+msgid "Total height of the mosaic, in pixels."
+msgstr "马赛克的高度 (像素)。"
+
+#: modules/video_filter/mosaic.c:97
+msgid "Total width of the mosaic, in pixels."
+msgstr "马赛克的宽度 (像素)。"
+
+#: modules/video_filter/mosaic.c:99
+msgid "Top left corner X coordinate"
+msgstr "左上角 x 坐标"
+
+#: modules/video_filter/mosaic.c:101
+msgid "X Coordinate of the top-left corner of the mosaic."
+msgstr "马赛克左上角的 X 坐标。"
+
+#: modules/video_filter/mosaic.c:102
+msgid "Top left corner Y coordinate"
+msgstr "左上角 x 坐标"
+
+#: modules/video_filter/mosaic.c:104
+msgid "Y Coordinate of the top-left corner of the mosaic."
+msgstr "马赛克左上角的 Y 坐标。"
+
+#: modules/video_filter/mosaic.c:106
+msgid "Border width"
+msgstr "边界宽度"
+
+#: modules/video_filter/mosaic.c:108
+msgid "Width in pixels of the border between miniatures."
+msgstr ""
+
+#: modules/video_filter/mosaic.c:109
+msgid "Border height"
+msgstr "边界高度"
+
+#: modules/video_filter/mosaic.c:111
+msgid "Height in pixels of the border between miniatures."
+msgstr ""
+
+#: modules/video_filter/mosaic.c:113
+msgid "Mosaic alignment"
+msgstr "马赛克对齐"
+
+#: modules/video_filter/mosaic.c:115
+#, fuzzy
+msgid ""
+"You can enforce the mosaic alignment on the video (0=center, 1=left, "
+"2=right, 4=top, 8=bottom, you can also use combinations of these values, eg "
+"6 = top-right)."
+msgstr ""
+"强制指定视频在其窗口中的对齐方式。默认值 0 为居中(0 = 居中,1 = 左,2 = 右,"
+"4 = 上,8 = 下,可以设置组合值,如 6 = 4 + 2 表示右上方对齐)。"
+
+#: modules/video_filter/mosaic.c:119
+msgid "Positioning method"
+msgstr "定位模式"
+
+#: modules/video_filter/mosaic.c:121
+#, fuzzy
+msgid ""
+"Positioning method for the mosaic. auto: automatically choose the best "
+"number of rows and columns. fixed: use the user-defined number of rows and "
+"columns. offsets: use the user-defined offsets for each image."
+msgstr ""
+"马赛克的定位方式。自动: 自动选择最好的行数和列数。固定: 使用用户定义的行数和"
+"列数。"
+
+#: modules/video_filter/mosaic.c:126 modules/video_filter/panoramix.c:85
+#: modules/video_filter/wall.c:60
+msgid "Number of rows"
+msgstr "行数"
+
+#: modules/video_filter/mosaic.c:128
+#, fuzzy
+msgid ""
+"Number of image rows in the mosaic (only used if positionning method is set "
+"to \"fixed\")."
+msgstr "在马赛克中的行数 (只在定位方式被设为“固定”时使用)。"
+
+#: modules/video_filter/mosaic.c:131 modules/video_filter/panoramix.c:81
+#: modules/video_filter/wall.c:56
+msgid "Number of columns"
+msgstr "列数"
+
+#: modules/video_filter/mosaic.c:133
+msgid ""
+"Number of image columns in the mosaic (only used if positionning method is "
+"set to \"fixed\"."
+msgstr "在马赛克中的列数 (只在定位方式被设为“固定”时使用)。"
+
+#: modules/video_filter/mosaic.c:138
+#, fuzzy
+msgid "Keep the original aspect ratio when resizing mosaic elements."
+msgstr "保持马赛克元素的原始大小。"
+
+#: modules/video_filter/mosaic.c:140
+msgid "Keep original size"
+msgstr "保持原始大小"
+
+#: modules/video_filter/mosaic.c:142
+msgid "Keep the original size of mosaic elements."
+msgstr "保持马赛克元素的原始大小。"
+
+#: modules/video_filter/mosaic.c:144
+msgid "Elements order"
+msgstr "元素顺序"
+
+#: modules/video_filter/mosaic.c:146
+msgid ""
+"You can enforce the order of the elements on the mosaic. You must give a "
+"comma-separated list of picture ID(s).These IDs are assigned in the \"mosaic-"
+"bridge\" module."
+msgstr ""
+
+#: modules/video_filter/mosaic.c:150
+#, fuzzy
+msgid "Offsets in order"
+msgstr "元素顺序"
+
+#: modules/video_filter/mosaic.c:152
+msgid ""
+"You can enforce the (x,y) offsets of the elements on the mosaic (only used "
+"if positioning method is set to \"offsets\"). You must give a comma-"
+"separated list of coordinates (eg: 10,10,150,10)."
+msgstr ""
+
+#: modules/video_filter/mosaic.c:158
+msgid ""
+"Pictures coming from the mosaic elements will be delayed according to this "
+"value (in milliseconds). For high values you will need to raise caching at "
+"input."
+msgstr ""
+
+#: modules/video_filter/mosaic.c:168
+msgid "fixed"
+msgstr "固定"
+
+#: modules/video_filter/mosaic.c:168
+#, fuzzy
+msgid "offsets"
+msgstr "X 偏移量"
+
+#: modules/video_filter/mosaic.c:178
+msgid "Mosaic video sub filter"
+msgstr "马赛克视频过滤器"
+
+#: modules/video_filter/mosaic.c:179
+msgid "Mosaic"
+msgstr "马赛克"
+
+#: modules/video_filter/motionblur.c:54
+msgid "Blur factor (1-127)"
+msgstr "模糊化因数 (1-127)"
+
+#: modules/video_filter/motionblur.c:55
+msgid "The degree of blurring from 1 to 127."
+msgstr "模糊化的程度,从 1 到 127。"
+
+#: modules/video_filter/motionblur.c:61
+msgid "Motion blur filter"
+msgstr "动作模糊化过滤器"
+
+#: modules/video_filter/motiondetect.c:61
+msgid "Motion detect video filter"
+msgstr "动作检测视频过滤器"
+
+#: modules/video_filter/motiondetect.c:62
+#, fuzzy
+msgid "Motion Detect"
+msgstr "动作检测"
+
+#: modules/video_filter/noise.c:53
+#, fuzzy
+msgid "Noise video filter"
+msgstr "复制视频过滤器"
+
+#: modules/video_filter/opencv_example.cpp:67
+msgid "OpenCV face detection example filter"
+msgstr ""
+
+#: modules/video_filter/opencv_example.cpp:68
+#, fuzzy
+msgid "OpenCV example"
+msgstr "打开文件"
+
+#: modules/video_filter/opencv_example.cpp:77
+msgid "Haar cascade filename"
+msgstr ""
+
+#: modules/video_filter/opencv_example.cpp:78
+msgid "Name of XML file containing Haar cascade description"
+msgstr ""
+
+#: modules/video_filter/opencv_wrapper.c:70
+#, fuzzy
+msgid "Use input chroma unaltered"
+msgstr "视频输入彩度格式"
+
+#: modules/video_filter/opencv_wrapper.c:71
+msgid "I420 - first plane is greyscale"
+msgstr ""
+
+#: modules/video_filter/opencv_wrapper.c:71
+msgid "RGB32"
+msgstr ""
+
+#: modules/video_filter/opencv_wrapper.c:74
+#, fuzzy
+msgid "Don't display any video"
+msgstr "显示视频快照预览"
+
+#: modules/video_filter/opencv_wrapper.c:75
+#, fuzzy
+msgid "Display the input video"
+msgstr "显示视频快照预览"
+
+#: modules/video_filter/opencv_wrapper.c:75
+#, fuzzy
+msgid "Display the processed video"
+msgstr "本地显示串流"
+
+#: modules/video_filter/opencv_wrapper.c:78
+msgid "Show only errors"
+msgstr ""
+
+#: modules/video_filter/opencv_wrapper.c:79
+msgid "Show errors and warnings"
+msgstr ""
+
+#: modules/video_filter/opencv_wrapper.c:79
+msgid "Show everything including debug messages"
+msgstr ""
+
+#: modules/video_filter/opencv_wrapper.c:82
+#, fuzzy
+msgid "OpenCV video filter wrapper"
+msgstr "ffmpeg 视频过滤器"
+
+#: modules/video_filter/opencv_wrapper.c:83
+#, fuzzy
+msgid "OpenCV"
+msgstr "打开"
+
+#: modules/video_filter/opencv_wrapper.c:90
+#, fuzzy
+msgid "Scale factor (0.1-2.0)"
+msgstr "模糊化因数 (1-127)"
+
+#: modules/video_filter/opencv_wrapper.c:91
+msgid ""
+"Ammount by which to scale the picture before sending it to the internal "
+"OpenCV filter"
+msgstr ""
+
+#: modules/video_filter/opencv_wrapper.c:94
+#, fuzzy
+msgid "OpenCV filter chroma"
+msgstr "打开文件"
+
+#: modules/video_filter/opencv_wrapper.c:95
+msgid ""
+"Chroma to convert picture to before sending it to the internal OpenCV filter"
+msgstr ""
+
+#: modules/video_filter/opencv_wrapper.c:98
+#, fuzzy
+msgid "Wrapper filter output"
+msgstr "使用float32输出"
+
+#: modules/video_filter/opencv_wrapper.c:99
+msgid "Determines what (if any) video is displayed by the wrapper filter"
+msgstr ""
+
+#: modules/video_filter/opencv_wrapper.c:102
+#, fuzzy
+msgid "Wrapper filter verbosity"
+msgstr "使用float32输出"
+
+#: modules/video_filter/opencv_wrapper.c:103
+msgid "Determines wrapper filter verbosity level"
+msgstr ""
+
+#: modules/video_filter/opencv_wrapper.c:106
+#, fuzzy
+msgid "OpenCV internal filter name"
+msgstr "ffmpeg 视频过滤器"
+
+#: modules/video_filter/opencv_wrapper.c:107
+msgid "Name of internal OpenCV plugin filter to use"
+msgstr ""
+
+#: modules/video_filter/osdmenu.c:43
+msgid "Configuration file"
+msgstr "设置文件"
+
+#: modules/video_filter/osdmenu.c:45
+#, fuzzy
+msgid "Configuration file for the OSD Menu."
+msgstr "OSD 菜单的设置文件"
+
+#: modules/video_filter/osdmenu.c:46
+msgid "Path to OSD menu images"
+msgstr "OSD 菜单图片的路径"
+
+#: modules/video_filter/osdmenu.c:48
+msgid ""
+"Path to the OSD menu images. This will override the path defined in the OSD "
+"configuration file."
+msgstr "OSD 菜单图片的路径。这将覆盖在 OSD 设置文件中定义的路径。"
+
+#: modules/video_filter/osdmenu.c:52 modules/video_filter/osdmenu.c:55
+msgid "You can move the OSD menu by left-clicking on it."
+msgstr "您可以单击 OSD 菜单来移动它。"
+
+#: modules/video_filter/osdmenu.c:57
+msgid "Menu position"
+msgstr "菜单位置"
+
+#: modules/video_filter/osdmenu.c:59
+#, fuzzy
+msgid ""
+"You can enforce the OSD menu position on the video (0=center, 1=left, "
+"2=right, 4=top, 8=bottom, you can also use combinations of these values, eg. "
+"6 = top-right)."
+msgstr ""
+"强制指定视频在其窗口中的对齐方式。默认值 0 为居中(0 = 居中,1 = 左,2 = 右,"
+"4 = 上,8 = 下,可以设置组合值,如 6 = 4 + 2 表示右上方对齐)。"
+
+#: modules/video_filter/osdmenu.c:63
+msgid "Menu timeout"
+msgstr "菜单超时时间"
+
+#: modules/video_filter/osdmenu.c:65
+msgid ""
+"OSD menu pictures get a default timeout of 15 seconds added to their "
+"remaining time. This will ensure that they are at least the specified time "
+"visible."
+msgstr ""
+
+#: modules/video_filter/osdmenu.c:69
+msgid "Menu update interval"
+msgstr "菜单更新间隔"
+
+#: modules/video_filter/osdmenu.c:71
+msgid ""
+"The default is to update the OSD menu picture every 200 ms. Shorten the "
+"update time for environments that experience transmissions errors. Be "
+"careful with this option as encoding OSD menu pictures is very computing "
+"intensive. The range is 0 - 1000 ms."
+msgstr ""
+
+#: modules/video_filter/osdmenu.c:76 modules/video_filter/remoteosd.c:157
+msgid "Alpha transparency value (default 255)"
+msgstr ""
+
+#: modules/video_filter/osdmenu.c:78
+msgid ""
+"The transparency of the OSD menu can be changed by giving a value between 0 "
+"and 255. A lower value specifies more transparency a higher means less "
+"transparency. The default is being not transparent (value 255) the minimum "
+"is fully transparent (value 0)."
+msgstr ""
+
+#: modules/video_filter/osdmenu.c:134
+msgid "On Screen Display menu"
+msgstr "画面上显示 (OSD)"
+
+#: modules/video_filter/panoramix.c:82
+#, fuzzy
+msgid ""
+"Select the number of horizontal video windows in which to split the video"
+msgstr "选择分割视频的横向视频窗口的数目"
+
+#: modules/video_filter/panoramix.c:86
+#, fuzzy
+msgid "Select the number of vertical video windows in which to split the video"
+msgstr "选择分割视频的纵向视频窗口的数目"
+
+#: modules/video_filter/panoramix.c:89 modules/video_filter/wall.c:64
+msgid "Active windows"
+msgstr "活动窗口"
+
+#: modules/video_filter/panoramix.c:90
+#, fuzzy
+msgid "Comma separated list of active windows, defaults to all"
+msgstr "活动窗口列表, 以逗号分开, 默认为全部"
+
+#: modules/video_filter/panoramix.c:96
+msgid "Panoramix: wall with overlap video filter"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:108
+msgid "Offset X offset (automatic compensation)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:109
+msgid ""
+"Select if you want an automatic offset in horizontal (in case of "
+"misalignment due to autoratio control)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:112
+msgid "length of the overlapping area (in %)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:113
+msgid "Select in percent the length of the blended zone"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:116
+msgid "height of the overlapping area (in %)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:117
+msgid "Select in percent the height of the blended zone (case of 2x2 wall)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:120
+#, fuzzy
+msgid "Attenuation"
+msgstr "目标"
+
+#: modules/video_filter/panoramix.c:121
+msgid ""
+"Check this option if you want attenuate blended zone by this plug-in (if "
+"option is unchecked, attenuate is made by opengl)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:124
+#, fuzzy
+msgid "Attenuation, begin (in %)"
+msgstr "目标"
+
+#: modules/video_filter/panoramix.c:125
+msgid "Select in percent the Lagrange coeff of the beginning blended zone"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:128
+msgid "Attenuation, middle (in %)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:129
+msgid "Select in percent the Lagrange coeff of the middle of blended zone"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:132
+#, fuzzy
+msgid "Attenuation, end (in %)"
+msgstr "目标"
+
+#: modules/video_filter/panoramix.c:133
+msgid "Select in percent the Lagrange coeff of the end of blended zone"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:136
+msgid "middle position (in %)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:137
+msgid ""
+"Select in percent (50 is center) the position of the middle point (Lagrange) "
+"of blended zone"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:140
+msgid "Gamma (Red) correction"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:141
+msgid ""
+"Select the gamma for the correction of blended zone (Red or Y component)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:144
+msgid "Gamma (Green) correction"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:145
+msgid ""
+"Select the gamma for the correction of blended zone (Green or U component)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:148
+msgid "Gamma (Blue) correction"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:149
+msgid ""
+"Select the gamma for the correction of blended zone (Blue or V component)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:152
+msgid "Black Crush for Red"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:153
+msgid "Select the Black Crush of blended zone (Red or Y component)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:154
+msgid "Black Crush for Green"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:155
+msgid "Select the Black Crush of blended zone (Green or U component)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:156
+msgid "Black Crush for Blue"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:157
+msgid "Select the Black Crush of blended zone (Blue or V component)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:159
+msgid "White Crush for Red"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:160
+msgid "Select the White Crush of blended zone (Red or Y component)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:161
+msgid "White Crush for Green"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:162
+msgid "Select the White Crush of blended zone (Green or U component)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:163
+msgid "White Crush for Blue"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:164
+msgid "Select the White Crush of blended zone (Blue or V component)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:166
+msgid "Black Level for Red"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:167
+msgid "Select the Black Level of blended zone (Red or Y component)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:168
+msgid "Black Level for Green"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:169
+msgid "Select the Black Level of blended zone (Green or U component)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:170
+msgid "Black Level for Blue"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:171
+msgid "Select the Black Level of blended zone (Blue or V component)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:173
+msgid "White Level for Red"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:174
+msgid "Select the White Level of blended zone (Red or Y component)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:175
+msgid "White Level for Green"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:176
+msgid "Select the White Level of blended zone (Green or U component)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:177
+msgid "White Level for Blue"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:178
+msgid "Select the White Level of blended zone (Blue or V component)"
+msgstr ""
+
+#: modules/video_filter/panoramix.c:192
+#, fuzzy
+msgid "Xinerama option"
+msgstr "性能选项"
+
+#: modules/video_filter/panoramix.c:193
+msgid "Uncheck if you have not used xinerama"
+msgstr ""
+
+#: modules/video_filter/postproc.c:59
+msgid "Post processing quality"
+msgstr "后处理质量"
+
+#: modules/video_filter/postproc.c:61
+msgid ""
+"Quality of post processing. Valid range is 0 to 6\n"
+"Higher levels require considerable more CPU power, but produce better "
+"looking pictures."
+msgstr ""
+
+#: modules/video_filter/postproc.c:65
+msgid "FFmpeg post processing filter chains"
+msgstr ""
+
+#: modules/video_filter/postproc.c:75
+#, fuzzy
+msgid "Video post processing filter"
+msgstr "视频缩放过滤器"
+
+#: modules/video_filter/postproc.c:225
+#, fuzzy
+msgid "Lowest"
+msgstr "1 (最低)"
+
+#: modules/video_filter/postproc.c:228
+#, fuzzy
+msgid "Highest"
+msgstr "6 (最高)"
+
+#: modules/video_filter/psychedelic.c:54
+#, fuzzy
+msgid "Psychedelic video filter"
+msgstr "墙视频过滤器"
+
+#: modules/video_filter/puzzle.c:65 modules/video_filter/puzzle.c:66
+#, fuzzy
+msgid "Number of puzzle rows"
+msgstr "行数"
+
+#: modules/video_filter/puzzle.c:67 modules/video_filter/puzzle.c:68
+#, fuzzy
+msgid "Number of puzzle columns"
+msgstr "列数"
+
+#: modules/video_filter/puzzle.c:69
+msgid "Make one tile a black slot"
+msgstr ""
+
+#: modules/video_filter/puzzle.c:70
+msgid ""
+"Make one slot black. Other tiles can only be swapped with the black slot."
+msgstr ""
+
+#: modules/video_filter/puzzle.c:75
+#, fuzzy
+msgid "Puzzle interactive game video filter"
+msgstr "解除交错视频过滤器"
+
+#: modules/video_filter/puzzle.c:76
+#, fuzzy
+msgid "Puzzle"
+msgstr "紫色"
+
+#: modules/video_filter/remoteosd.c:129
+msgid "VNC Host"
+msgstr ""
+
+#: modules/video_filter/remoteosd.c:131
+msgid "VNC hostname or IP address."
+msgstr ""
+
+#: modules/video_filter/remoteosd.c:133
+#, fuzzy
+msgid "VNC Port"
+msgstr "VCD格式"
+
+#: modules/video_filter/remoteosd.c:135
+#, fuzzy
+msgid "VNC portnumber."
+msgstr "XVideo 适配器数目"
+
+#: modules/video_filter/remoteosd.c:137
+#, fuzzy
+msgid "VNC Password"
+msgstr "密码"
+
+#: modules/video_filter/remoteosd.c:139
+#, fuzzy
+msgid "VNC password."
+msgstr "SOCKS密码"
+
+#: modules/video_filter/remoteosd.c:141
+#, fuzzy
+msgid "VNC poll interval"
+msgstr "关键帧间隔"
+
+#: modules/video_filter/remoteosd.c:143
+msgid ""
+"In this interval an update from VNC is requested, default every 300 ms. "
+msgstr ""
+
+#: modules/video_filter/remoteosd.c:145
+#, fuzzy
+msgid "VNC polling"
+msgstr "正在播放"
+
+#: modules/video_filter/remoteosd.c:147
+msgid "Activate VNC polling. Do NOT activate for use as VDR ffnetdev client."
+msgstr ""
+
+#: modules/video_filter/remoteosd.c:149
+#, fuzzy
+msgid "Mouse events"
+msgstr "鼠标手势"
+
+#: modules/video_filter/remoteosd.c:151
+msgid ""
+"Send mouse events to VNC host. Not needed for use as VDR ffnetdev client."
+msgstr ""
+
+#: modules/video_filter/remoteosd.c:153
+msgid "Key events"
+msgstr ""
+
+#: modules/video_filter/remoteosd.c:155
+msgid "Send key events to VNC host."
+msgstr ""
+
+#: modules/video_filter/remoteosd.c:159
+msgid ""
+"The transparency of the OSD VNC can be changed by giving a value between 0 "
+"and 255. A lower value specifies more transparency a higher means less "
+"transparency. The default is being not transparent (value 255) the minimum "
+"is fully transparent (value 0)."
+msgstr ""
+
+#: modules/video_filter/remoteosd.c:172
+msgid "Remote-OSD over VNC"
+msgstr ""
+
+#: modules/video_filter/remoteosd.c:174
+#, fuzzy
+msgid "Remote-OSD"
+msgstr "移除"
+
+#: modules/video_filter/ripple.c:53
+#, fuzzy
+msgid "Ripple video filter"
+msgstr "复制视频过滤器"
+
+#: modules/video_filter/rotate.c:58
+msgid "Angle in degrees"
+msgstr ""
+
+#: modules/video_filter/rotate.c:59
+msgid "Angle in degrees (0 to 359)"
+msgstr ""
+
+#: modules/video_filter/rotate.c:67
+#, fuzzy
+msgid "Rotate video filter"
+msgstr "墙视频过滤器"
+
+#: modules/video_filter/rss.c:129
+msgid "Feed URLs"
+msgstr "Feed URL"
+
+#: modules/video_filter/rss.c:130
+msgid "RSS/Atom feed '|' (pipe) seperated URLs."
+msgstr ""
+
+#: modules/video_filter/rss.c:131
+msgid "Speed of feeds"
+msgstr "Feed 的速度"
+
+#: modules/video_filter/rss.c:132
+msgid "Speed of the RSS/Atom feeds in microseconds (bigger is slower)."
+msgstr ""
+
+#: modules/video_filter/rss.c:133
+msgid "Max length"
+msgstr "最大长度"
+
+#: modules/video_filter/rss.c:134
+msgid "Maximum number of characters displayed on the screen."
+msgstr "屏幕上显示的最大字符数。"
+
+#: modules/video_filter/rss.c:136
+msgid "Refresh time"
+msgstr "刷新时间"
+
+#: modules/video_filter/rss.c:137
+msgid ""
+"Number of seconds between each forced refresh of the feeds. 0 means that the "
+"feeds are never updated."
+msgstr ""
+
+#: modules/video_filter/rss.c:139
+msgid "Feed images"
+msgstr "Feed 图像"
+
+#: modules/video_filter/rss.c:140
+msgid "Display feed images if available."
+msgstr "如可用,显示 feed 图像。"
+
+#: modules/video_filter/rss.c:147
+msgid ""
+"Opacity (inverse of transparency) of overlay text. 0 = transparent, 255 = "
+"totally opaque."
+msgstr ""
+
+#: modules/video_filter/rss.c:160
+msgid "Text position"
+msgstr "文字位置"
+
+#: modules/video_filter/rss.c:162
+#, fuzzy
+msgid ""
+"You can enforce the text position on the video (0=center, 1=left, 2=right, "
+"4=top, 8=bottom; you can also use combinations of these values, eg 6 = top-"
+"right)."
+msgstr ""
+"强制指定视频在其窗口中的对齐方式。默认值 0 为居中(0 = 居中,1 = 左,2 = 右,"
+"4 = 上,8 = 下,可以设置组合值,如 6 = 4 + 2 表示右上方对齐)。"
+
+#: modules/video_filter/rss.c:166
+#, fuzzy
+msgid "Title display mode"
+msgstr "X11 显示"
+
+#: modules/video_filter/rss.c:167
+msgid ""
+"Title display mode. Default is 0 (hidden) if the feed has an image and feed "
+"images are enabled, 1 otherwise."
+msgstr ""
+
+#: modules/video_filter/rss.c:182
+msgid "Don't show"
+msgstr ""
+
+#: modules/video_filter/rss.c:182
+#, fuzzy
+msgid "Always visible"
+msgstr "永远固定"
+
+#: modules/video_filter/rss.c:182
+msgid "Scroll with feed"
+msgstr ""
+
+#: modules/video_filter/rss.c:222
+msgid "RSS and Atom feed display"
+msgstr "RSS 及 Atom feed 显示"
+
+#: modules/video_filter/rv32.c:57
+msgid "RV32 conversion filter"
+msgstr "RV32 转换过滤器"
+
+#: modules/video_filter/seamcarving.c:63
+#, fuzzy
+msgid "Seam Carving video filter"
+msgstr "修整视频过滤器"
+
+#: modules/video_filter/seamcarving.c:64
+#, fuzzy
+msgid "Seam Carving"
+msgstr "串流"
+
+#: modules/video_filter/sharpen.c:47
+msgid "Sharpen strength (0-2)"
+msgstr ""
+
+#: modules/video_filter/sharpen.c:48
+#, fuzzy
+msgid "Set the Sharpen strength, between 0 and 2. Defaults to 0.05."
+msgstr "设置影像的对比,介于0和2之间,默认值为1"
+
+#: modules/video_filter/sharpen.c:66
+msgid "Augment contrast between contours."
+msgstr ""
+
+#: modules/video_filter/sharpen.c:67
+#, fuzzy
+msgid "Sharpen video filter"
+msgstr "修整视频过滤器"
+
+#: modules/video_filter/swscale.c:56
+msgid "Scaling mode"
+msgstr "缩放模式"
+
+#: modules/video_filter/swscale.c:57
+msgid "Scaling mode to use."
+msgstr "要使用的缩放模式"
+
+#: modules/video_filter/swscale.c:61
+msgid "Fast bilinear"
+msgstr "快速双线性"
+
+#: modules/video_filter/swscale.c:61
+msgid "Bilinear"
+msgstr "双线性"
+
+#: modules/video_filter/swscale.c:61
+msgid "Bicubic (good quality)"
+msgstr ""
+
+#: modules/video_filter/swscale.c:62
+msgid "Experimental"
+msgstr "试验性的"
+
+#: modules/video_filter/swscale.c:62
+msgid "Nearest neighbour (bad quality)"
+msgstr ""
+
+#: modules/video_filter/swscale.c:63
+msgid "Area"
+msgstr "区域"
+
+#: modules/video_filter/swscale.c:63
+msgid "Luma bicubic / chroma bilinear"
+msgstr ""
+
+#: modules/video_filter/swscale.c:63
+msgid "Gauss"
+msgstr "高斯"
+
+#: modules/video_filter/swscale.c:64
+#, fuzzy
+msgid "SincR"
+msgstr "皮肤"
+
+#: modules/video_filter/swscale.c:64
+#, fuzzy
+msgid "Lanczos"
+msgstr "老挝文"
+
+#: modules/video_filter/swscale.c:64
+msgid "Bicubic spline"
+msgstr ""
+
+#: modules/video_filter/transform.c:65
+msgid "Transform type"
+msgstr "转换类型"
+
+#: modules/video_filter/transform.c:66
+msgid "One of '90', '180', '270', 'hflip' and 'vflip'"
+msgstr "'90', '180', '270', 'hflip' 和 'vflip' 中的一个"
+
+#: modules/video_filter/transform.c:69
+msgid "Rotate by 90 degrees"
+msgstr "旋转90度"
+
+#: modules/video_filter/transform.c:70
+msgid "Rotate by 180 degrees"
+msgstr "旋转180度"
+
+#: modules/video_filter/transform.c:70
+msgid "Rotate by 270 degrees"
+msgstr "旋转270度"
+
+#: modules/video_filter/transform.c:71
+msgid "Flip horizontally"
+msgstr "水平翻转"
+
+#: modules/video_filter/transform.c:71
+msgid "Flip vertically"
+msgstr "垂直翻转"
+
+#: modules/video_filter/transform.c:76
+msgid "Video transformation filter"
+msgstr "文件转换过滤器"
+
+#: modules/video_filter/wall.c:57
+msgid "Number of horizontal windows in which to split the video."
+msgstr "选择分割视频的横向视频窗口的数目"
+
+#: modules/video_filter/wall.c:61
+msgid "Number of vertical windows in which to split the video."
+msgstr "选择分割视频的纵向视频窗口的数目"
+
+#: modules/video_filter/wall.c:65
+msgid "Comma-separated list of active windows, defaults to all"
+msgstr "活动窗口列表, 以逗号分开, 默认为全部"
+
+#: modules/video_filter/wall.c:68
+msgid "Element aspect ratio"
+msgstr "元素外观率"
+
+#: modules/video_filter/wall.c:69
+msgid "Aspect ratio of the individual displays building the wall."
+msgstr ""
+
+#: modules/video_filter/wall.c:75
+msgid "Wall video filter"
+msgstr "墙视频过滤器"
+
+#: modules/video_filter/wall.c:76
+msgid "Image wall"
+msgstr "图片墙"
+
+#: modules/video_filter/wave.c:54
+#, fuzzy
+msgid "Wave video filter"
+msgstr "墙视频过滤器"
+
+#: modules/video_output/aa.c:58
+msgid "ASCII Art"
+msgstr "ASCII 图片"
+
+#: modules/video_output/aa.c:61
+msgid "ASCII-art video output"
+msgstr "ASCII-art 视频输出"
+
+#: modules/video_output/caca.c:83
+msgid "Color ASCII art video output"
+msgstr "彩色 ASCII 图片视频输出"
+
+#: modules/video_output/directfb.c:72
+msgid "DirectFB video output http://www.directfb.org/"
+msgstr "DirectFB 视频输出 http://www.directfb.org"
+
+#: modules/video_output/fb.c:82
+msgid "Run fb on current tty."
+msgstr ""
+
+#: modules/video_output/fb.c:84
+msgid ""
+"Run framebuffer on current TTY device (default enabled). (disable tty "
+"handling with caution)"
+msgstr ""
+
+#: modules/video_output/fb.c:95
+#, fuzzy
+msgid "Framebuffer resolution to use."
+msgstr "Framebuffer 设备"
+
+#: modules/video_output/fb.c:97
+msgid ""
+"Select the resolution for the framebuffer. Currently it supports the values "
+"0=QCIF 1=CIF 2=NTSC 3=PAL, 4=auto (default 4=auto)"
+msgstr ""
+
+#: modules/video_output/fb.c:100
+#, fuzzy
+msgid "Framebuffer uses hw acceleration."
+msgstr "Framebuffer 设备"
+
+#: modules/video_output/fb.c:102
+msgid ""
+"If your framebuffer supports hardware acceleration or does double buffering "
+"in hardware then you must disable this option. It then does double buffering "
+"in software."
+msgstr ""
+
+#: modules/video_output/fb.c:121
+msgid "GNU/Linux console framebuffer video output"
+msgstr "GNU/Linux 控制台 framebuffer 视频输出"
+
+#: modules/video_output/ggi.c:59 modules/video_output/x11/glx.c:104
+#: modules/video_output/x11/x11.c:55 modules/video_output/x11/xvideo.c:61
+msgid "X11 display"
+msgstr "X11 显示"
+
+#: modules/video_output/ggi.c:61
+msgid ""
+"X11 hardware display to use.\n"
+"By default, VLC will use the value of the DISPLAY environment variable."
+msgstr ""
+"指定您所要用的 X11 硬件显示。默认状态下,VLC 将会使用 DISPLAY 环境变量的值。"
+
+#: modules/video_output/hd1000v.cpp:60
+msgid "HD1000 video output"
+msgstr "HD1000视频输出"
+
+#: modules/video_output/image.c:53
+msgid "Image format"
+msgstr "影像格式"
+
+#: modules/video_output/image.c:54
+msgid "Format of the output images (png or jpg)."
+msgstr "设置输出影像格式 (png 获 jpg)。"
+
+#: modules/video_output/image.c:56
+msgid "Image width"
+msgstr "图像宽度"
+
+#: modules/video_output/image.c:57
+msgid ""
+"You can enforce the image width. By default (-1) VLC will adapt to the video "
+"characteristics."
+msgstr "您可以强制图像宽度。默认值 (-1) 下 VLC 将会根据视频来自动调整。"
+
+#: modules/video_output/image.c:61
+msgid "Image height"
+msgstr "图像高度"
+
+#: modules/video_output/image.c:62
+msgid ""
+"You can enforce the image height. By default (-1) VLC will adapt to the "
+"video characteristics."
+msgstr "您可以强制图像高度。默认值 (-1) 下 VLC 将会根据视频来自动调整。"
+
+#: modules/video_output/image.c:66
+msgid "Recording ratio"
+msgstr "录制比率"
+
+#: modules/video_output/image.c:67
+msgid ""
+"Ratio of images to record. 3 means that one image out of three is recorded."
+msgstr "设定要被录制的图像的比率。3 即表示三个图像中有一个被录制。"
+
+#: modules/video_output/image.c:70
+msgid "Filename prefix"
+msgstr "文件名称前缀"
+
+#: modules/video_output/image.c:71
+msgid ""
+"Prefix of the output images filenames. Output filenames will have the "
+"\"prefixNUMBER.format\" form."
+msgstr "设置文件名称的前缀。输出的文件名将会是 \"前缀 数字.格式\" 的形式。"
+
+#: modules/video_output/image.c:75
+msgid "Always write to the same file"
+msgstr "总是写到相同的文件"
+
+#: modules/video_output/image.c:76
+msgid ""
+"Always write to the same file instead of creating one file per image. In "
+"this case, the number is not appended to the filename."
+msgstr ""
+
+#: modules/video_output/image.c:87
+msgid "Image video output"
+msgstr "影像视频输出"
+
+#: modules/video_output/mga.c:62
+msgid "Matrox Graphic Array video output"
+msgstr "Matrox 图像阵列视频显示"
+
+#: modules/video_output/msw/direct3d.c:112
+#, fuzzy
+msgid "DirectX 3D video output"
+msgstr "DirectX视频输出"
+
+#: modules/video_output/msw/directx.c:131
+msgid "Use hardware YUV->RGB conversions"
+msgstr "使用硬件 YUV->RGB 转换"
+
+#: modules/video_output/msw/directx.c:133
+msgid ""
+"Try to use hardware acceleration for YUV->RGB conversions. This option "
+"doesn't have any effect when using overlays."
+msgstr ""
+
+#: modules/video_output/msw/directx.c:136
+msgid "Use video buffers in system memory"
+msgstr "在系统内存中使用视频缓冲区"
+
+#: modules/video_output/msw/directx.c:138
+msgid ""
+"Create video buffers in system memory instead of video memory. This isn't "
+"recommended as usually using video memory allows to benefit from more "
+"hardware acceleration (like rescaling or YUV->RGB conversions). This option "
+"doesn't have any effect when using overlays."
+msgstr ""
+
+#: modules/video_output/msw/directx.c:143
+msgid "Use triple buffering for overlays"
+msgstr "在 overlay 中使用三重缓存"
+
+#: modules/video_output/msw/directx.c:145
+msgid ""
+"Try to use triple buffering when using YUV overlays. That results in much "
+"better video quality (no flickering)."
+msgstr ""
+"在使用 YUV Overlay 时,试图使用三重缓存。那将导致大大增强的视频质量。(没有闪"
+"烁)。"
+
+#: modules/video_output/msw/directx.c:148
+msgid "Name of desired display device"
+msgstr "所要使用的显示设备"
+
+#: modules/video_output/msw/directx.c:149
+msgid ""
+"In a multiple monitor configuration, you can specify the Windows device name "
+"of the display that you want the video window to open on. For example, \"\\"
+"\\.\\DISPLAY1\" or \"\\\\.\\DISPLAY2\"."
+msgstr ""
+"在多显示器的配置中,您可以指定您要视频窗口显示在哪个显示器中 (使用Windows 设"
+"备名)。例如,\"\\\\.\\DISPLAY1\" or \"\\\\.\\DISPLAY2\"."
+
+#: modules/video_output/msw/directx.c:154
+msgid "Enable wallpaper mode "
+msgstr "打开壁纸模式"
+
+#: modules/video_output/msw/directx.c:156
+msgid ""
+"The wallpaper mode allows you to display the video as the desktop "
+"background. Note that this feature only works in overlay mode and the "
+"desktop must not already have a wallpaper."
+msgstr ""
+"壁纸模式允许您在桌面背景上显示视频。注: 此功能仅能在 overlay 模式中使用并且桌"
+"面必须没有设定壁纸。"
+
+#: modules/video_output/msw/directx.c:182
+msgid "DirectX video output"
+msgstr "DirectX视频输出"
+
+#: modules/video_output/msw/directx.c:321
+msgid "Wallpaper"
+msgstr "壁纸"
+
+#: modules/video_output/msw/glwin32.c:69 modules/video_output/opengl.c:189
+msgid "OpenGL video output"
+msgstr "OpenGL视频输出"
+
+#: modules/video_output/msw/wingdi.c:140
+msgid "Windows GAPI video output"
+msgstr "Windows GAPI视频输出"
+
+#: modules/video_output/msw/wingdi.c:144
+msgid "Windows GDI video output"
+msgstr "Windows GDI视频输出"
+
+#: modules/video_output/opengl.c:126 modules/video_output/opengl.c:182
+msgid "Cube"
+msgstr "立方体"
+
+#: modules/video_output/opengl.c:126 modules/video_output/opengl.c:182
+msgid "Transparent Cube"
+msgstr "透明的立方体"
+
+#: modules/video_output/opengl.c:127
+msgid "Cylinder"
+msgstr "圆柱"
+
+#: modules/video_output/opengl.c:127
+msgid "Torus"
+msgstr "圆环面"
+
+#: modules/video_output/opengl.c:127
+msgid "Sphere"
+msgstr "圆面"
+
+#: modules/video_output/opengl.c:127
+msgid "SQUAREXY"
+msgstr "SQUAREXY"
+
+#: modules/video_output/opengl.c:127
+msgid "SQUARER"
+msgstr "SQUARER"
+
+#: modules/video_output/opengl.c:127
+msgid "ASINXY"
+msgstr "ASINXY"
+
+#: modules/video_output/opengl.c:127
+msgid "ASINR"
+msgstr "ASINR"
+
+#: modules/video_output/opengl.c:127
+msgid "SINEXY"
+msgstr "SINEXY"
+
+#: modules/video_output/opengl.c:127
+msgid "SINER"
+msgstr "SINER"
+
+#: modules/video_output/opengl.c:155
+msgid "OpenGL sampling accuracy "
+msgstr "OpenGL 取样准确度"
+
+#: modules/video_output/opengl.c:156
+msgid "Select the accuracy of 3D object sampling(1 = min and 10 = max)"
+msgstr "设置 3D 对象取样的准确度 (1 为最小,10 为最大)"
+
+#: modules/video_output/opengl.c:157
+msgid "OpenGL Cylinder radius"
+msgstr ""
+
+#: modules/video_output/opengl.c:158
+msgid "Radius of the OpenGL cylinder effect, if enabled"
+msgstr "OpenGL 圆柱效果的半径, 如果启用"
+
+#: modules/video_output/opengl.c:159
+#, fuzzy
+msgid "Point of view x-coordinate"
+msgstr "解码 X 坐标"
+
+#: modules/video_output/opengl.c:160
+#, fuzzy
+msgid "Point of view (X coordinate) of the cube/cylinder effect, if enabled."
+msgstr "OpenGL 圆柱效果的半径, 如果启用"
+
+#: modules/video_output/opengl.c:162
+#, fuzzy
+msgid "Point of view y-coordinate"
+msgstr "解码 X 坐标"
+
+#: modules/video_output/opengl.c:163
+#, fuzzy
+msgid "Point of view (Y coordinate) of the cube/cylinder effect, if enabled."
+msgstr "OpenGL 圆柱效果的半径, 如果启用"
+
+#: modules/video_output/opengl.c:165
+#, fuzzy
+msgid "Point of view z-coordinate"
+msgstr "解码 X 坐标"
+
+#: modules/video_output/opengl.c:166
+#, fuzzy
+msgid "Point of view (Z coordinate) of the cube/cylinder effect, if enabled."
+msgstr "OpenGL 圆柱效果的半径, 如果启用"
+
+#: modules/video_output/opengl.c:169
+#, fuzzy
+msgid "OpenGL Provider"
+msgstr "OpenGL(GLX) 提供者"
+
+#: modules/video_output/opengl.c:170
+msgid "Allows you to modify what OpenGL provider should be used"
+msgstr ""
+
+#: modules/video_output/opengl.c:171
+msgid "OpenGL cube rotation speed"
+msgstr "OpenGL 立方体旋转速度"
+
+#: modules/video_output/opengl.c:172
+msgid "Rotation speed of the OpenGL cube effect, if enabled."
+msgstr "OpenGL cube 效果的转动速度,如果打开的话。"
+
+#: modules/video_output/opengl.c:176
+msgid "Several visual OpenGL effects are available."
+msgstr "有一些 OpenGL 视觉效果可用。"
+
+#: modules/video_output/opengllayer.m:96
+msgid "Core Animation OpenGL Layer (Mac OS X)"
+msgstr ""
+
+#: modules/video_output/qte/qte.cpp:82
+msgid "QT Embedded display"
+msgstr "QT Embedded 显示"
+
+#: modules/video_output/qte/qte.cpp:84
+msgid ""
+"Qt Embedded hardware display to use. By default VLC will use the value of "
+"the DISPLAY environment variable."
+msgstr ""
+"指定您所要使用的 Qt Embedded 硬件显示。默认状态下 VLC 将会使用 DISPLAY 环境变"
+"量的值。"
+
+#: modules/video_output/qte/qte.cpp:120
+msgid "QT Embedded video output"
+msgstr "QT Embedded 视频输出"
+
+#: modules/video_output/sdl.c:115
+#, fuzzy
+msgid "SDL chroma format"
+msgstr "XVimage彩度格式"
+
+#: modules/video_output/sdl.c:117
+#, fuzzy
+msgid ""
+"Force the SDL renderer to use a specific chroma format instead of trying to "
+"improve performances by using the most efficient one."
+msgstr ""
+"强制 XVideo 渲染器使用一个特定的色度格式,而不是试图使用最有效的格式来增强性"
+"能。"
+
+#: modules/video_output/sdl.c:127
+msgid "Simple DirectMedia Layer video output"
+msgstr "SDL 视频输出"
+
+#: modules/video_output/snapshot.c:65
+msgid "Snapshot width"
+msgstr "快照宽度"
+
+#: modules/video_output/snapshot.c:66
+msgid "Width of the snapshot image."
+msgstr "设置快照影像的宽度"
+
+#: modules/video_output/snapshot.c:68
+msgid "Snapshot height"
+msgstr "快照高度"
+
+#: modules/video_output/snapshot.c:69
+msgid "Height of the snapshot image."
+msgstr "设置快照影像的高度"
+
+#: modules/video_output/snapshot.c:71 modules/video_output/vmem.c:59
+msgid "Chroma"
+msgstr "色度"
+
+#: modules/video_output/snapshot.c:72
+msgid ""
+"Output chroma for the snapshot image (a 4 character string, like \"RV32\")."
+msgstr "设置所希望的快照图像的色度 (一个 4 个字符的字符串, 例如 \"RV32\")。"
+
+#: modules/video_output/snapshot.c:75
+msgid "Cache size (number of images)"
+msgstr "缓存大小 (影像数量)"
+
+#: modules/video_output/snapshot.c:76
+msgid "Snapshot cache size (number of images to keep)."
+msgstr "设置缓存大小 (保留影像的数量)"
+
+#: modules/video_output/snapshot.c:80
+msgid "Snapshot module"
+msgstr "快照模块"
+
+#: modules/video_output/svgalib.c:60
+msgid "SVGAlib video output"
+msgstr "SVGAlib视频输出"
+
+#: modules/video_output/vmem.c:51
+msgid "Video memory buffer width."
+msgstr ""
+
+#: modules/video_output/vmem.c:54
+#, fuzzy
+msgid "Video memory buffer height."
+msgstr "视频高度"
+
+#: modules/video_output/vmem.c:56
+#, fuzzy
+msgid "Pitch"
+msgstr "路径"
+
+#: modules/video_output/vmem.c:57
+msgid "Video memory buffer pitch in bytes."
+msgstr ""
+
+#: modules/video_output/vmem.c:60
+#, fuzzy
+msgid ""
+"Output chroma for the memory image as a 4-character string, eg. \"RV32\"."
+msgstr "设置所希望的快照图像的色度 (一个 4 个字符的字符串, 例如 \"RV32\")。"
+
+#: modules/video_output/vmem.c:63
+#, fuzzy
+msgid "Lock function"
+msgstr "拉丁文"
+
+#: modules/video_output/vmem.c:64
+msgid ""
+"Address of the locking callback function. This function must return a valid "
+"memory address for use by the video renderer."
+msgstr ""
+
+#: modules/video_output/vmem.c:68
+#, fuzzy
+msgid "Unlock function"
+msgstr "时钟同步"
+
+#: modules/video_output/vmem.c:69
+msgid "Address of the unlocking callback function"
+msgstr ""
+
+#: modules/video_output/vmem.c:71
+msgid "Callback data"
+msgstr ""
+
+#: modules/video_output/vmem.c:72
+msgid "Data for the locking and unlocking functions"
+msgstr ""
+
+#: modules/video_output/vmem.c:75
+#, fuzzy
+msgid "Video memory module"
+msgstr "视频过滤器模块"
+
+#: modules/video_output/vmem.c:76
+#, fuzzy
+msgid "Video memory"
+msgstr "视频端口"
+
+#: modules/video_output/x11/glx.c:90 modules/video_output/x11/xvideo.c:47
+msgid "XVideo adaptor number"
+msgstr "XVideo 适配器数目"
+
+#: modules/video_output/x11/glx.c:92
+msgid ""
+"If your graphics card provides several adaptors, you have to choose which "
+"one will be used (you shouldn't have to change this)."
+msgstr ""
+"如果您的显卡提供多个适配器,此选项可以允许您选择使用哪一个。(您应该不必更改此"
+"项)。"
+
+#: modules/video_output/x11/glx.c:95 modules/video_output/x11/x11.c:46
+#: modules/video_output/x11/xvideo.c:52 modules/video_output/x11/xvmc.c:102
+msgid "Alternate fullscreen method"
+msgstr "替代全屏幕方法"
+
+#: modules/video_output/x11/glx.c:97 modules/video_output/x11/x11.c:48
+#: modules/video_output/x11/xvideo.c:54 modules/video_output/x11/xvmc.c:104
+msgid ""
+"There are two ways to make a fullscreen window, unfortunately each one has "
+"its drawbacks.\n"
+"1) Let the window manager handle your fullscreen window (default), but "
+"things like taskbars will likely show on top of the video.\n"
+"2) Completely bypass the window manager, but then nothing will be able to "
+"show on top of the video."
+msgstr ""
+"有两种方法可以显示一个全屏幕窗口,但是每一种都有它的缺点。\n"
+"1) 让窗口管理器处理您的全屏窗口 (默认),但是任务栏之类的东西可能会在影像上面"
+"显示。\n"
+"2) 完全忽略窗口管理器,但是任何东西将会无法在影像上面显示。"
+
+#: modules/video_output/x11/glx.c:106 modules/video_output/x11/x11.c:57
+#: modules/video_output/x11/xvideo.c:63
+msgid ""
+"X11 hardware display to use. By default VLC will use the value of the "
+"DISPLAY environment variable."
+msgstr ""
+"指定您想要使用的 X11 硬件显示。默认状态下 VLC 将会使用 DISPLAY 环境变量的值。"
+
+#: modules/video_output/x11/glx.c:109 modules/video_output/x11/x11.c:64
+#: modules/video_output/x11/xvideo.c:75
+msgid "Screen for fullscreen mode."
+msgstr "用于全屏幕模式的屏幕。"
+
+#: modules/video_output/x11/glx.c:111 modules/video_output/x11/x11.c:66
+#: modules/video_output/x11/xvideo.c:77
+msgid ""
+"Screen to use in fullscreen mode. For instance set it to 0 for first screen, "
+"1 for the second."
+msgstr ""
+"选择您所要在全屏模式下所使用的屏幕。例如,将它设为 0 可以使用第一个屏幕,1 为"
+"第二个。"
+
+#: modules/video_output/x11/glx.c:118
+msgid "OpenGL(GLX) provider"
+msgstr "OpenGL(GLX) 提供者"
+
+#: modules/video_output/x11/x11.c:60 modules/video_output/x11/xvideo.c:71
+#: modules/video_output/x11/xvmc.c:121
+msgid "Use shared memory"
+msgstr "使用共享内存"
+
+#: modules/video_output/x11/x11.c:62 modules/video_output/x11/xvideo.c:73
+#: modules/video_output/x11/xvmc.c:123
+msgid "Use shared memory to communicate between VLC and the X server."
+msgstr "使用共享内存来在 VLC 和 X 服务器间通信。"
+
+#: modules/video_output/x11/x11.c:81
+msgid "X11 video output"
+msgstr "X11视频输出"
+
+#: modules/video_output/x11/xvideo.c:49
+msgid ""
+"If your graphics card provides several adaptors, you need to choose which "
+"one will be used (you shouldn't have to change this)."
+msgstr ""
+"如果您的显卡提供多个适配器,此选项可以允许您选择使用哪一个。(您应该不必更改此"
+"项)。"
+
+#: modules/video_output/x11/xvideo.c:66 modules/video_output/x11/xvmc.c:116
+msgid "XVimage chroma format"
+msgstr "XVimage彩度格式"
+
+#: modules/video_output/x11/xvideo.c:68 modules/video_output/x11/xvmc.c:118
+msgid ""
+"Force the XVideo renderer to use a specific chroma format instead of trying "
+"to improve performances by using the most efficient one."
+msgstr ""
+"强制 XVideo 渲染器使用一个特定的色度格式,而不是试图使用最有效的格式来增强性"
+"能。"
+
+#: modules/video_output/x11/xvideo.c:95
+msgid "XVideo extension video output"
+msgstr "XVideo延伸视频输出"
+
+#: modules/video_output/x11/xvmc.c:97
+#, fuzzy
+msgid "XVMC adaptor number"
+msgstr "XVideo 适配器数目"
+
+#: modules/video_output/x11/xvmc.c:99
+#, fuzzy
+msgid ""
+"If you graphics card provides several adaptors, this option allows you to "
+"choose which one will be used (you shouldn't have to change this)."
+msgstr ""
+"如果您的显卡提供多个适配器,此选项可以允许您选择使用哪一个。(您应该不必更改此"
+"项)。"
+
+#: modules/video_output/x11/xvmc.c:111
+#, fuzzy
+msgid "X11 display name"
+msgstr "X11 显示"
+
+#: modules/video_output/x11/xvmc.c:113
+#, fuzzy
+msgid ""
+"Specify the X11 hardware display you want to use. By default VLC will use "
+"the value of the DISPLAY environment variable."
+msgstr ""
+"指定您想要使用的 X11 硬件显示。默认状态下 VLC 将会使用 DISPLAY 环境变量的值。"
+
+#: modules/video_output/x11/xvmc.c:125
+#, fuzzy
+msgid "Screen to be used for fullscreen mode."
+msgstr "用于全屏幕模式的屏幕。"
+
+#: modules/video_output/x11/xvmc.c:127
+#, fuzzy
+msgid ""
+"Choose the screen you want to use in fullscreen mode. For instance set it to "
+"0 for first screen, 1 for the second."
+msgstr ""
+"选择您所要在全屏模式下所使用的屏幕。例如,将它设为 0 可以使用第一个屏幕,1 为"
+"第二个。"
+
+#: modules/video_output/x11/xvmc.c:131
+#, fuzzy
+msgid "You can choose the default deinterlace mode"
+msgstr "循环解除交错模块。"
+
+#: modules/video_output/x11/xvmc.c:134
+#, fuzzy
+msgid "You can choose the crop style to apply."
+msgstr "循环解除交错模块。"
+
+#: modules/video_output/x11/xvmc.c:151
+#, fuzzy
+msgid "XVMC extension video output"
+msgstr "XVideo延伸视频输出"
+
+#: modules/visualization/galaktos/plugin.c:48
+msgid "GaLaktos visualization plugin"
+msgstr "GaLaktos视觉效果外挂"
+
+#: modules/visualization/goom.c:61
+msgid "Goom display width"
+msgstr "Goom显示宽度"
+
+#: modules/visualization/goom.c:62
+msgid "Goom display height"
+msgstr "Goom显示高度"
+
+#: modules/visualization/goom.c:63
+msgid ""
+"This allows you to set the resolution of the Goom display (bigger resolution "
+"will be prettier but more CPU intensive)."
+msgstr ""
+"允许您更改 Goom 显示的分辨率 (大一些的分辨率将会更好看,但也会增大 CPU 的占"
+"用)。"
+
+#: modules/visualization/goom.c:66
+msgid "Goom animation speed"
+msgstr "Goom动画速度"
+
+#: modules/visualization/goom.c:67
+msgid ""
+"This allows you to set the animation speed (between 1 and 10, defaults to 6)."
+msgstr "设置动画速度 (在 1 和 10 之间,默认为 6)。"
+
+#: modules/visualization/goom.c:73
+#, fuzzy
+msgid "Goom"
+msgstr "缩放"
+
+#: modules/visualization/goom.c:74
+msgid "Goom effect"
+msgstr "Goom效果"
+
+#: modules/visualization/visual/visual.c:41
+msgid "Effects list"
+msgstr "效果清单"
+
+#: modules/visualization/visual/visual.c:43
+msgid ""
+"A list of visual effect, separated by commas.\n"
+"Current effects include: dummy, scope, spectrum."
+msgstr ""
+"一个视觉效果的清单,以逗号分隔。\n"
+"当前的效果包括: dummy, scope, spectrum"
+
+#: modules/visualization/visual/visual.c:48
+msgid "The width of the effects video window, in pixels."
+msgstr "效果窗口的宽度 (像素)"
+
+#: modules/visualization/visual/visual.c:52
+msgid "The height of the effects video window, in pixels."
+msgstr "效果窗口的高度 (像素)"
+
+#: modules/visualization/visual/visual.c:54
+msgid "Number of bands"
+msgstr "频带数量"
+
+#: modules/visualization/visual/visual.c:56
+msgid "Number of bands used by spectrum analyzer, should be 20 or 80."
+msgstr "用于频谱分析器的频带数量,应为 20 或 80。"
+
+#: modules/visualization/visual/visual.c:58
+msgid "Number of bands used by the spectrometer, from 20 to 80."
+msgstr "用于 spectrOmeter 的频带数量,应为 20 到 80"
+
+#: modules/visualization/visual/visual.c:60
+msgid "Band separator"
+msgstr "频带分离器"
+
+#: modules/visualization/visual/visual.c:62
+msgid "Number of blank pixels between bands."
+msgstr "频带间的空白像素数量"
+
+#: modules/visualization/visual/visual.c:64
+msgid "Amplification"
+msgstr "放大率"
+
+#: modules/visualization/visual/visual.c:66
+msgid "This is a coefficient that modifies the height of the bands."
+msgstr "这是一个修改频带高度的系数。"
+
+#: modules/visualization/visual/visual.c:68
+msgid "Enable peaks"
+msgstr "打开峰值"
+
+#: modules/visualization/visual/visual.c:70
+msgid "Draw \"peaks\" in the spectrum analyzer."
+msgstr ""
+
+#: modules/visualization/visual/visual.c:72
+msgid "Enable original graphic spectrum"
+msgstr "打开原始图形频谱"
+
+#: modules/visualization/visual/visual.c:74
+msgid "Enable the \"flat\" spectrum analyzer in the spectrometer."
+msgstr ""
+
+#: modules/visualization/visual/visual.c:76
+msgid "Enable bands"
+msgstr "打开频带"
+
+#: modules/visualization/visual/visual.c:78
+msgid "Draw bands in the spectrometer."
+msgstr ""
+
+#: modules/visualization/visual/visual.c:80
+msgid "Enable base"
+msgstr "启用基准"
+
+#: modules/visualization/visual/visual.c:82
+#, fuzzy
+msgid "Defines whether to draw the base of the bands."
+msgstr "定义是否显示频带"
+
+#: modules/visualization/visual/visual.c:84
+msgid "Base pixel radius"
+msgstr "基本像素半径"
+
+#: modules/visualization/visual/visual.c:86
+msgid "Defines radius size in pixels, of base of bands(beginning)."
+msgstr "以像素为单位定义半径大小"
+
+#: modules/visualization/visual/visual.c:88
+msgid "Spectral sections"
+msgstr "光谱部分"
+
+#: modules/visualization/visual/visual.c:90
+msgid "Determines how many sections of spectrum will exist."
+msgstr "决定有多少部分的光谱将存在"
+
+#: modules/visualization/visual/visual.c:92
+msgid "Peak height"
+msgstr "峰值高度"
+
+#: modules/visualization/visual/visual.c:94
+msgid "Total pixel height of the peak items."
+msgstr "此项是峰值项目的总高度 (像素)"
+
+#: modules/visualization/visual/visual.c:96
+msgid "Peak extra width"
+msgstr "额外峰宽度"
+
+#: modules/visualization/visual/visual.c:98
+msgid "Additions or subtractions of pixels on the peak width."
+msgstr "对峰宽度进行增减(像素)"
+
+#: modules/visualization/visual/visual.c:100
+msgid "V-plane color"
+msgstr "V-平面颜色"
+
+#: modules/visualization/visual/visual.c:102
+msgid "YUV-Color cube shifting across the V-plane ( 0 - 127 )."
+msgstr ""
+
+#: modules/visualization/visual/visual.c:104
+msgid "Number of stars"
+msgstr "星星的数目"
+
+#: modules/visualization/visual/visual.c:106
+msgid "Number of stars to draw with random effect."
+msgstr "设定随机效果中的星星的数目"
+
+#: modules/visualization/visual/visual.c:112
+msgid "Visualizer"
+msgstr "可视化过滤器"
+
+#: modules/visualization/visual/visual.c:115
+msgid "Visualizer filter"
+msgstr "可视化过滤器"
+
+#: modules/visualization/visual/visual.c:123
+msgid "Spectrum analyser"
+msgstr "频谱分析器"
+
+#, fuzzy
+#~ msgid "RTP reordering timeout in ms"
+#~ msgstr "TCP连接超时时间"
+
+#, fuzzy
+#~ msgid "FFmpeg audio/video decoders/encoders"
+#~ msgstr "ffmpeg 音频/视频编码器"
+
+#, fuzzy
+#~ msgid "Enable the strict rate control algorithm."
+#~ msgstr "启用噪声消除算法"
+
+#~ msgid "FFmpeg crop padd filter"
+#~ msgstr "ffmpeg 修整填补过滤器"
+
+#~ msgid "FFmpeg chroma conversion"
+#~ msgstr "ffmpeg 彩度转换"
+
+#~ msgid "Image adjustment"
+#~ msgstr "影像调整"
+
+#~ msgid "Previous track"
+#~ msgstr "上一轨"
+
+#~ msgid "Next track"
+#~ msgstr "下一轨"
+
+#, fuzzy
+#~ msgid "Interface settings"
+#~ msgstr "一般界面设置"
+
+#, fuzzy
+#~ msgid "Subtitles & OSD settings"
+#~ msgstr "字幕分离器设置"
+
+#, fuzzy
+#~ msgid "Go to time:"
+#~ msgstr "前往标题"
+
+#~ msgid "Open &File..."
+#~ msgstr "打开文件(&F)"
+
+#~ msgid "Empty"
+#~ msgstr "无项目"
+
+#~ msgid "&OK"
+#~ msgstr "确定(&O)"
+
+#~ msgid "&Delete"
+#~ msgstr "删除(&D)"
+
+#~ msgid "Removes the selected bookmarks"
+#~ msgstr "删除选定的书签"
+
+#~ msgid "Removes all the bookmarks for that stream"
+#~ msgstr "删除关于那个串流的所有书签"
+
+#~ msgid "Edit the properties of a bookmark"
+#~ msgstr "编译一个书签的属性"
+
+#~ msgid "You must select two bookmarks"
+#~ msgstr "您必须选择两个书签"
+
+#~ msgid "The stream must be playing or paused for bookmarks to work"
+#~ msgstr "要使书签有效,串流必须正在播放或处于暂停状态"
+
+#, fuzzy
+#~ msgid ""
+#~ "No input found. The stream must be playing or paused for bookmarks to "
+#~ "work."
+#~ msgstr ""
+#~ "没有找到输入。要使书签有效,必须有一个串流正在被播放或处于暂停状态。"
+
+#~ msgid "Input has changed "
+#~ msgstr "输入已改变"
+
+#~ msgid "All Files (*.*)|*|Sound Files (*.mp3, *.ogg, etc.)|"
+#~ msgstr "所有文件 (*.*)|*|音频文件 (*.mp3, *.ogg, etc.)|"
+
+#~ msgid "Stream and Media Info"
+#~ msgstr "串流及媒体信息"
+
+#~ msgid "Advanced information"
+#~ msgstr "高级选项"
+
+#~ msgid "URI"
+#~ msgstr "URI"
+
+#~ msgid "&Yes"
+#~ msgstr "是(&Y)"
+
+#~ msgid "&No"
+#~ msgstr "否(&N)"
+
+#~ msgid "Don't show further errors"
+#~ msgstr "不显示更多的错误"
+
+#~ msgid "Playlist item info"
+#~ msgstr "播放列表项目信息"
+
+#~ msgid "Save &As..."
+#~ msgstr "另存为(&A)..."
+
+#~ msgid "Save Messages As..."
+#~ msgstr "信息另存为..."
+
+#~ msgid "Options:"
+#~ msgstr "选项:"
+
+#~ msgid "Open..."
+#~ msgstr "打开..."
+
+#~ msgid "Stream/Save"
+#~ msgstr "串流/保存"
+
+#~ msgid "Use VLC as a stream server"
+#~ msgstr "使用 VLC 作为串流服务器"
+
+#~ msgid "Change the default caching value (in milliseconds)"
+#~ msgstr "变更默认缓存值(ms)"
+
+#~ msgid "Customize:"
+#~ msgstr "自定义: "
+
+#~ msgid "Use a subtitles file"
+#~ msgstr "使用字幕文件"
+
+#~ msgid "Use an external subtitles file."
+#~ msgstr "使用外部字幕文件"
+
+#~ msgid "Advanced Settings..."
+#~ msgstr "高级选项..."
+
+#~ msgid "File:"
+#~ msgstr "文件:"
+
+#~ msgid "DVD (menus)"
+#~ msgstr "DVD (选单)"
+
+#~ msgid "Disc type"
+#~ msgstr "光盘类型"
+
+#, fuzzy
+#~ msgid "HTTP/HTTPS/FTP/MMS"
+#~ msgstr "HTTP/FTP/MMS/RTSP"
+
+#, fuzzy
+#~ msgid "RTSP"
+#~ msgstr "RTP"
+
+#~ msgid "DVD device to use"
+#~ msgstr "要使用的 DVD 设备"
+
+#~ msgid "CD-ROM device to use"
+#~ msgstr "要使用的 CD-ROM 设备"
+
+#~ msgid "Title number."
+#~ msgstr "标题数目."
+
+#, fuzzy
+#~ msgid "Track number."
+#~ msgstr "轨道编号。"
+
+#~ msgid "Shuffle"
+#~ msgstr "打乱顺序"
+
+#~ msgid "&Simple Add File..."
+#~ msgstr "增加文件(&S)..."
+
+#~ msgid "Add &Directory..."
+#~ msgstr "增加目录(&D)..."
+
+#~ msgid "&Add URL..."
+#~ msgstr "增加 URL(&A)..."
+
+#~ msgid "Services Discovery"
+#~ msgstr "服务探索"
+
+#~ msgid "&Open Playlist..."
+#~ msgstr "打开播放列表(&O)..."
+
+#~ msgid "&Save Playlist..."
+#~ msgstr "储存播放列表(&S)..."
+
+#~ msgid "Sort by &Title"
+#~ msgstr "依标题排序(&T)"
+
+#~ msgid "&Reverse Sort by Title"
+#~ msgstr "依标题反向排序(&R)"
+
+#~ msgid "&Shuffle"
+#~ msgstr "乱化(&S)"
+
+#~ msgid "D&elete"
+#~ msgstr "删除(&D)"
+
+#~ msgid "&Manage"
+#~ msgstr "管理(&M)"
+
+#~ msgid "S&ort"
+#~ msgstr "排序(&S)"
+
+#~ msgid "&Selection"
+#~ msgstr "选择(&S)"
+
+#~ msgid "&View items"
+#~ msgstr "查看项目(&V)"
+
+#~ msgid "Play this Branch"
+#~ msgstr "播放该分支"
+
+#~ msgid "Preparse"
+#~ msgstr "预解释"
+
+#~ msgid "Sort this Branch"
+#~ msgstr "排序该分支"
+
+#~ msgid "Info"
+#~ msgstr "信息"
+
+#~ msgid "Add Node"
+#~ msgstr "添加节点"
+
+#~ msgid "%i items in playlist"
+#~ msgstr "%i个项目在播放列表中"
+
+#~ msgid "root"
+#~ msgstr "根"
+
+#~ msgid "XSPF playlist"
+#~ msgstr "XSPF 播放列表"
+
+#~ msgid "Playlist is empty"
+#~ msgstr "播放列表是空的"
+
+#~ msgid "Can't save"
+#~ msgstr "无法储存"
+
+#, fuzzy
+#~ msgid "One level"
+#~ msgstr "最大等级"
+
+#~ msgid "Please enter node name"
+#~ msgstr "请输入节点编号"
+
+#~ msgid "New node"
+#~ msgstr "新节点"
+
+#~ msgid "Unknown"
+#~ msgstr "未知"
+
+#~ msgid "Alt"
+#~ msgstr "Alt"
+
+#~ msgid "Ctrl"
+#~ msgstr "Ctrl"
+
+#~ msgid "Shift"
+#~ msgstr "Shift"
+
+#~ msgid ""
+#~ "Select the desired modules. For more advanced control, the resulting "
+#~ "\"chain\" can be modified."
+#~ msgstr ""
+#~ "请选择您所要的模块。如果要得到更高级的控制,您也可以自己修改所得到"
+#~ "的“chain”。"
+
+#~ msgid "Stream output MRL"
+#~ msgstr "串流输出MRL"
+
+#~ msgid "Target:"
+#~ msgstr "目标:"
+
+#~ msgid ""
+#~ "Specifies the MRL. This can be specified directly or filled in "
+#~ "automatically by adjusting the stream settings."
+#~ msgstr "指定 MRL。此项可以直接指定或以调整串流设置的方式自动填写。"
+
+#~ msgid "MMSH"
+#~ msgstr "MMSH"
+
+#~ msgid "Channel name"
+#~ msgstr "频道名称"
+
+#~ msgid "Select all elementary streams"
+#~ msgstr "选择所有的基本串流"
+
+#~ msgid "Subtitles codec"
+#~ msgstr "字幕编码器"
+
+#~ msgid "Subtitles overlay"
+#~ msgstr "字幕延迟"
+
+#~ msgid "Subtitle options"
+#~ msgstr "字幕选项"
+
+#~ msgid "Subtitles file"
+#~ msgstr "字幕文件"
+
+#~ msgid "Set subtitle delay (in 1/10s)"
+#~ msgstr "设置字幕延迟(1/10秒)"
+
+#~ msgid "Open file"
+#~ msgstr "打开文件"
+
+#~ msgid "Updates"
+#~ msgstr "更新"
+
+#~ msgid "Check for updates"
+#~ msgstr "检查更新"
+
+#~ msgid "Broadcasts"
+#~ msgstr "广播"
+
+#~ msgid "Load"
+#~ msgstr "读取"
+
+#~ msgid "Load Configuration"
+#~ msgstr "读取设置文件"
+
+#~ msgid "Save Configuration"
+#~ msgstr "保存设置文件"
+
+#~ msgid "New broadcast"
+#~ msgstr "新广播"
+
+#~ msgid "Create"
+#~ msgstr "建立"
+
+#~ msgid "VLM stream"
+#~ msgstr "VLM 流"