+msgstr "双重"
+
+#: modules/audio_filter/equalizer.c:68
+msgid "Filter the audio twice. This provides a more intense effect."
+msgstr "过滤音频两次。这将提供更好的效果。"
+
+#: modules/audio_filter/equalizer.c:71
+msgid "Global gain"
+msgstr "全局增益"
+
+#: modules/audio_filter/equalizer.c:72
+msgid "Set the global gain in dB (-20 ... 20)."
+msgstr "设置以 dB 为单位的全局增益 (-20 ... 20)."
+
+#: modules/audio_filter/equalizer.c:75
+msgid "Equalizer with 10 bands"
+msgstr "10 波段均衡器"
+
+#: modules/audio_filter/equalizer_presets.h:40
+msgid "Flat"
+msgstr "单调"
+
+#: modules/audio_filter/equalizer_presets.h:40
+#: modules/meta_engine/id3genres.h:60
+msgid "Classical"
+msgstr "经典"
+
+#: modules/audio_filter/equalizer_presets.h:40
+msgid "Club"
+msgstr "俱乐部"
+
+#: modules/audio_filter/equalizer_presets.h:40
+#: modules/meta_engine/id3genres.h:31
+msgid "Dance"
+msgstr "舞曲"
+
+#: modules/audio_filter/equalizer_presets.h:40
+msgid "Full bass"
+msgstr "全低音"
+
+#: modules/audio_filter/equalizer_presets.h:41
+msgid "Full bass and treble"
+msgstr "全低音和高音"
+
+#: modules/audio_filter/equalizer_presets.h:41
+msgid "Full treble"
+msgstr "全高音"
+
+#: modules/audio_filter/equalizer_presets.h:41
+msgid "Headphones"
+msgstr "耳机"
+
+#: modules/audio_filter/equalizer_presets.h:42
+msgid "Large Hall"
+msgstr "大音乐厅"
+
+#: modules/audio_filter/equalizer_presets.h:42
+msgid "Live"
+msgstr "实况"
+
+#: modules/audio_filter/equalizer_presets.h:42
+msgid "Party"
+msgstr "聚会"
+
+#: modules/audio_filter/equalizer_presets.h:42
+#: modules/meta_engine/id3genres.h:41
+msgid "Pop"
+msgstr "流行"
+
+#: modules/audio_filter/equalizer_presets.h:42
+#: modules/meta_engine/id3genres.h:44
+msgid "Reggae"
+msgstr "雷盖"
+
+#: modules/audio_filter/equalizer_presets.h:43
+#: modules/meta_engine/id3genres.h:45
+msgid "Rock"
+msgstr "摇滚"
+
+#: modules/audio_filter/equalizer_presets.h:43
+#: modules/meta_engine/id3genres.h:49
+msgid "Ska"
+msgstr "斯卡"
+
+#: modules/audio_filter/equalizer_presets.h:43
+msgid "Soft"
+msgstr "柔和"
+
+#: modules/audio_filter/equalizer_presets.h:43
+msgid "Soft rock"
+msgstr "慢摇"
+
+#: modules/audio_filter/equalizer_presets.h:43
+#: modules/meta_engine/id3genres.h:46
+msgid "Techno"
+msgstr "电子乐"
+
+#: modules/audio_filter/normvol.c:65
+msgid "Number of audio buffers"
+msgstr "音频缓冲数量"
+
+#: modules/audio_filter/normvol.c:66
+msgid ""
+"This is the number of audio buffers on which the power measurement is made. "
+"A higher number of buffers will increase the response time of the filter to "
+"a spike but will make it less sensitive to short variations."
+msgstr ""
+"这是功率测量时生成的音频缓冲数量。一个较高数值的缓冲将会增大滤镜的响应时间,"
+"但是可能会在短的变化内降低灵敏度。"
+
+#: modules/audio_filter/normvol.c:71
+msgid "Maximal volume level"
+msgstr "最大音量层级"
+
+#: modules/audio_filter/normvol.c:72
+msgid ""
+"If the average power over the last N buffers is higher than this value, the "
+"volume will be normalized. This value is a positive floating point number. A "
+"value between 0.5 and 10 seems sensible."
+msgstr ""
+"如果平均功率超过 N 缓冲并高于此值是,音量将会被规格化。此值必须是确定的浮点"
+"值。0.5 和 10 看上去比较合适。"
+
+#: modules/audio_filter/normvol.c:78 modules/audio_filter/normvol.c:79
+#: modules/gui/macosx/simple_prefs.m:236
+msgid "Volume normalizer"
+msgstr "音量规格化"
+
+#: modules/audio_filter/param_eq.c:52 modules/audio_filter/param_eq.c:53
+msgid "Parametric Equalizer"
+msgstr "参数均衡器"
+
+#: modules/audio_filter/param_eq.c:58
+msgid "Low freq (Hz)"
+msgstr "低频 (Hz)"
+
+#: modules/audio_filter/param_eq.c:60
+msgid "Low freq gain (dB)"
+msgstr "低频增益 (dB)"
+
+#: modules/audio_filter/param_eq.c:61
+msgid "High freq (Hz)"
+msgstr "高频 (Hz)"
+
+#: modules/audio_filter/param_eq.c:63
+msgid "High freq gain (dB)"
+msgstr "高频增益 (dB)"
+
+#: modules/audio_filter/param_eq.c:64
+msgid "Freq 1 (Hz)"
+msgstr "频率 1 (Hz)"
+
+#: modules/audio_filter/param_eq.c:66
+msgid "Freq 1 gain (dB)"
+msgstr "频率 1 增益 (dB)"
+
+#: modules/audio_filter/param_eq.c:68
+msgid "Freq 1 Q"
+msgstr "频率 1 Q"
+
+#: modules/audio_filter/param_eq.c:69
+msgid "Freq 2 (Hz)"
+msgstr "频率 2 (Hz)"
+
+#: modules/audio_filter/param_eq.c:71
+msgid "Freq 2 gain (dB)"
+msgstr "频率 2 增益 (dB)"
+
+#: modules/audio_filter/param_eq.c:73
+msgid "Freq 2 Q"
+msgstr "频率 2 Q"
+
+#: modules/audio_filter/param_eq.c:74
+msgid "Freq 3 (Hz)"
+msgstr "频率 3 (Hz)"
+
+#: modules/audio_filter/param_eq.c:76
+msgid "Freq 3 gain (dB)"
+msgstr "频率 3 增益 (dB)"
+
+#: modules/audio_filter/param_eq.c:78
+msgid "Freq 3 Q"
+msgstr "频率 3 Q"
+
+#: modules/audio_filter/resampler/bandlimited.c:89
+msgid "Audio filter for band-limited interpolation resampling"
+msgstr "用于波段限制查补重采样的音频滤镜"
+
+#: modules/audio_filter/resampler/ugly.c:48
+msgid "Audio filter for ugly resampling"
+msgstr "用于难听重采样的音频滤镜"
+
+#: modules/audio_filter/scaletempo.c:47
+msgid "Audio tempo scaler synched with rate"
+msgstr "音频节拍定标器,与频率同步"
+
+#: modules/audio_filter/scaletempo.c:48
+msgid "Scaletempo"
+msgstr "节拍比例"
+
+#: modules/audio_filter/scaletempo.c:54
+msgid "Stride Length"
+msgstr "步长度"
+
+#: modules/audio_filter/scaletempo.c:54
+msgid "Length in milliseconds to output each stride"
+msgstr "以毫秒为单的输出布长度"
+
+#: modules/audio_filter/scaletempo.c:56
+msgid "Overlap Length"
+msgstr "覆盖长度"
+
+#: modules/audio_filter/scaletempo.c:56
+msgid "Percentage of stride to overlap"
+msgstr "覆盖步长度百分比"
+
+#: modules/audio_filter/scaletempo.c:58
+msgid "Search Length"
+msgstr "搜索长度"
+
+#: modules/audio_filter/scaletempo.c:58
+msgid "Length in milliseconds to search for best overlap position"
+msgstr "以毫秒为单位的最佳搜索覆盖未知"
+
+#: modules/audio_filter/spatializer/spatializer.cpp:54
+msgid "Room size"
+msgstr "室内大小"
+
+#: modules/audio_filter/spatializer/spatializer.cpp:55
+msgid "Defines the virtual surface of the room emulated by the filter."
+msgstr "定义滤镜模拟房间的虚拟表面。"
+
+#: modules/audio_filter/spatializer/spatializer.cpp:58
+msgid "Room width"
+msgstr "室内宽度"
+
+#: modules/audio_filter/spatializer/spatializer.cpp:59
+msgid "Width of the virtual room"
+msgstr "虚拟室内的宽度"
+
+#: modules/audio_filter/spatializer/spatializer.cpp:61
+msgid "Wet"
+msgstr "湿"
+
+#: modules/audio_filter/spatializer/spatializer.cpp:64
+msgid "Dry"
+msgstr "干"
+
+#: modules/audio_filter/spatializer/spatializer.cpp:67
+msgid "Damp"
+msgstr "湿气"
+
+#: modules/audio_filter/spatializer/spatializer.cpp:71
+msgid "Audio Spatializer"
+msgstr "音频空间化器"
+
+#: modules/audio_filter/spatializer/spatializer.cpp:72
+#: modules/gui/qt4/dialogs/extended.cpp:58
+msgid "Spatializer"
+msgstr "声场定位"
+
+#: modules/audio_mixer/float32.c:50
+msgid "Float32 audio mixer"
+msgstr "Float32 音频混合器"
+
+#: modules/audio_mixer/spdif.c:51
+msgid "Dummy S/PDIF audio mixer"
+msgstr "空 S/PDIF 音频混合器"
+
+#: modules/audio_mixer/trivial.c:50
+msgid "Trivial audio mixer"
+msgstr "高音混合气"
+
+#: modules/audio_output/alsa.c:88
+msgid "default"
+msgstr "默认"
+
+#: modules/audio_output/alsa.c:110
+msgid "ALSA audio output"
+msgstr "ALSA 音频输出"
+
+#: modules/audio_output/alsa.c:114
+msgid "ALSA Device Name"
+msgstr "ALSA 设备名称"
+
+#: modules/audio_output/alsa.c:135 modules/audio_output/auhal.c:154
+#: modules/audio_output/auhal.c:992 modules/audio_output/directx.c:351
+#: modules/audio_output/oss.c:129 modules/audio_output/portaudio.c:389
+#: modules/audio_output/sdl.c:174 modules/audio_output/sdl.c:192
+#: modules/audio_output/waveout.c:374 modules/gui/macosx/intf.m:675
+#: modules/gui/macosx/intf.m:676
+msgid "Audio Device"
+msgstr "音频设备"
+
+#: modules/audio_output/alsa.c:205 modules/audio_output/directx.c:429
+#: modules/audio_output/oss.c:178 modules/audio_output/portaudio.c:414
+#: modules/audio_output/waveout.c:412
+msgid "2 Front 2 Rear"
+msgstr "2 前置 2 后置"
+
+#: modules/audio_output/alsa.c:253 modules/audio_output/directx.c:553
+#: modules/audio_output/oss.c:246 modules/audio_output/waveout.c:462
+msgid "A/52 over S/PDIF"
+msgstr "A/52 超过 S/PDIF"
+
+#: modules/audio_output/alsa.c:351
+msgid "No Audio Device"
+msgstr "无音频设备"
+
+#: modules/audio_output/alsa.c:352
+msgid "No audio device name was given. You might want to enter \"default\"."
+msgstr "未给予音频设备名称。您可能希望输入 \"默认\"。"
+
+#: modules/audio_output/alsa.c:459 modules/audio_output/alsa.c:498
+#: modules/audio_output/alsa.c:510 modules/audio_output/auhal.c:269
+msgid "Audio output failed"
+msgstr "音频输出失败"
+
+#: modules/audio_output/alsa.c:460 modules/audio_output/alsa.c:511
+#, c-format
+msgid "VLC could not open the ALSA device \"%s\" (%s)."
+msgstr "VLC 无法打开 ALSA 设备 \"%s\" (%s)。"
+
+#: modules/audio_output/alsa.c:499
+#, c-format
+msgid "The audio device \"%s\" is already in use."
+msgstr "音频设备 \"%s\" 已经在使用。"
+
+#: modules/audio_output/alsa.c:982
+msgid "Unknown soundcard"
+msgstr "未知声卡"
+
+#: modules/audio_output/auhal.c:155
+msgid ""
+"Choose a number corresponding to the number of an audio device, as listed in "
+"your 'Audio Device' menu. This device will then be used by default for audio "
+"playback."
+msgstr ""
+"选择一个相当于音频设备的编号,将在您的 '音频设备' 菜单列出。此设备将会在之后"
+"被用于默认播放音频。"
+
+#: modules/audio_output/auhal.c:161
+msgid "HAL AudioUnit output"
+msgstr "HAL 音频单元输出"
+
+#: modules/audio_output/auhal.c:270
+msgid ""
+"The selected audio output device is exclusively in use by another program."
+msgstr "选择的音频设备正在被其它应用程序使用。"
+
+#: modules/audio_output/auhal.c:454
+msgid "Audio device is not configured"
+msgstr "未设置音频设备"
+
+#: modules/audio_output/auhal.c:455
+msgid ""
+"You should configure your speaker layout with the \"Audio Midi Setup\" "
+"utility in /Applications/Utilities. Stereo mode is being used now."
+msgstr ""
+"您应该在 /应用程序/工具中的 \"音频 midi 设置\" 中设置您的扬声器摆放位置。现在"
+"将使用立体声模式。"
+
+#: modules/audio_output/auhal.c:1039
+#, c-format
+msgid "%s (Encoded Output)"
+msgstr "%s (已编码的输出)"
+
+#: modules/audio_output/directx.c:120 modules/audio_output/portaudio.c:106
+msgid "Output device"
+msgstr "输出设备"
+
+#: modules/audio_output/directx.c:121
+msgid "Select your audio output device"
+msgstr "选择音频输出设备"
+
+#: modules/audio_output/directx.c:123
+msgid "Speaker configuration"
+msgstr "扬声器配置"
+
+#: modules/audio_output/directx.c:124
+msgid ""
+"Select speaker configuration you want to use. This option doesn't upmix! So "
+"NO e.g. Stereo -> 5.1 conversion."
+msgstr ""
+"选择您想用的扬声器配置。此选项不支持上混! 所以请 *不要* 做类似 立体声 -> 5.1 "
+"的转换。"
+
+#: modules/audio_output/directx.c:128
+msgid "DirectX audio output"
+msgstr "DirectX 音频输出"
+
+#: modules/audio_output/directx.c:406 modules/audio_output/portaudio.c:422
+msgid "3 Front 2 Rear"
+msgstr "3 前置 2 后置"
+
+#: modules/audio_output/file.c:81
+msgid "Output format"
+msgstr "输出可是"
+
+#: modules/audio_output/file.c:82
+msgid ""
+"One of \"u8\", \"s8\", \"u16\", \"s16\", \"u16_le\", \"s16_le\", \"u16_be\", "
+"\"s16_be\", \"fixed32\", \"float32\" or \"spdif\""
+msgstr ""
+"\"u8\", \"s8\", \"u16\", \"s16\", \"u16_le\", \"s16_le\", \"u16_be\", "
+"\"s16_be\", \"fixed32\", \"float32\" or \"spdif\" 中的一个"
+
+#: modules/audio_output/file.c:85
+msgid "Number of output channels"
+msgstr "输出声道数"
+
+#: modules/audio_output/file.c:86
+msgid ""
+"By default, all the channels of the incoming will be saved but you can "
+"restrict the number of channels here."
+msgstr "按默认,所有的进入的声道都将被保存但是您可以在这里重定义数字。"
+
+#: modules/audio_output/file.c:89
+msgid "Add WAVE header"
+msgstr "添加波形头部"
+
+#: modules/audio_output/file.c:90
+msgid "Instead of writing a raw file, you can add a WAV header to the file."
+msgstr "您可以添加一个 WAV 头部到文件中而不是直接写入到一个原始文件。"
+
+#: modules/audio_output/file.c:107
+msgid "Output file"
+msgstr "输出文件"
+
+#: modules/audio_output/file.c:108
+msgid "File to which the audio samples will be written to. (\"-\" for stdout"
+msgstr "要写入音频采样的文件 (\"-\" 为标准输出"
+
+#: modules/audio_output/file.c:111
+msgid "File audio output"
+msgstr "文件音频输出"
+
+#: modules/audio_output/hd1000a.cpp:77
+msgid "Roku HD1000 audio output"
+msgstr "Roku HD1000 音频输出"
+
+#: modules/audio_output/jack.c:70
+msgid "Automatically connect to writable clients"
+msgstr "自动连接到可写入的客户端"
+
+#: modules/audio_output/jack.c:72
+msgid ""
+"If enabled, this option will automatically connect sound output to the first "
+"writable JACK clients found."
+msgstr "如果开启此选项将连接到发现的首个可写的 JACK 客户端音频输出。"
+
+#: modules/audio_output/jack.c:76
+msgid "Connect to clients matching"
+msgstr "正在匹配连接到的客户端"
+
+#: modules/audio_output/jack.c:78
+msgid ""
+"If automatic connection is enabled, only JACK clients whose names match this "
+"regular expression will be considered for connection."
+msgstr "如果开启了自动连接,仅那些符合此正则表达式的 JACK 客户端将被连接。"
+
+#: modules/audio_output/jack.c:86
+msgid "JACK audio output"
+msgstr "JACK 音频输出"
+
+#: modules/audio_output/oss.c:97
+msgid "Try to work around buggy OSS drivers"
+msgstr "尝试和一个轻便的 OSS 驱动工作"
+
+#: modules/audio_output/oss.c:99
+msgid ""
+"Some buggy OSS drivers just don't like when their internal buffers are "
+"completely filled (the sound gets heavily hashed). If you have one of these "
+"drivers, then you need to enable this option."
+msgstr ""
+"某些便携的 OSS 驱动不会在内部缓冲被完全填充时完全相同 (音频会严重失真)。如果"
+"您有这些驱动,您应该开启此选项。"
+
+#: modules/audio_output/oss.c:105
+msgid "UNIX OSS audio output"
+msgstr "UNIX OSS 音频输出"
+
+#: modules/audio_output/oss.c:110
+msgid "OSS DSP device"
+msgstr "OSS DSP 设备"
+
+#: modules/audio_output/portaudio.c:107
+msgid "Portaudio identifier for the output device"
+msgstr "用于输出设备的 Portaudio 定义器"
+
+#: modules/audio_output/portaudio.c:111
+msgid "PORTAUDIO audio output"
+msgstr "PORTAUDIO 音频输出"
+
+#: modules/audio_output/portaudio.c:430 modules/audio_output/waveout.c:391
+msgid "5.1"
+msgstr "5.1"
+
+#: modules/audio_output/pulse.c:65 modules/gui/macosx/embeddedwindow.m:76
+#: modules/gui/macosx/intf.m:595 modules/gui/macosx/intf.m:596
+#: modules/gui/macosx/intf.m:1992 modules/gui/qt4/dialogs/help.cpp:99
+#: modules/gui/qt4/main_interface.cpp:808
+#: modules/gui/qt4/main_interface.cpp:812
+#: modules/gui/qt4/main_interface.cpp:852
+#: modules/gui/qt4/main_interface.cpp:854
+#: modules/gui/qt4/main_interface.cpp:922
+#: modules/gui/qt4/main_interface.cpp:939
+#: modules/gui/qt4/main_interface.cpp:946
+#: modules/gui/qt4/main_interface.cpp:969
+#: modules/video_output/xcb/window.c:319
+msgid "VLC media player"
+msgstr "VLC media player"
+
+#: modules/audio_output/pulse.c:103
+msgid "Pulseaudio audio output"
+msgstr "Pulseaudio 音频输出"
+
+#: modules/audio_output/sdl.c:69
+msgid "Simple DirectMedia Layer audio output"
+msgstr "Simple DirectMedia Layer 音频输出"
+
+#: modules/audio_output/waveout.c:83
+msgid "Microsoft Soundmapper"
+msgstr "Microsoft 音频映射器"
+
+#: modules/audio_output/waveout.c:90
+msgid "Select Audio Device"
+msgstr "选择音频设备"
+
+#: modules/audio_output/waveout.c:91
+msgid ""
+"Select special Audio device, or let windows decide (default), change needs "
+"VLC restart to apply."
+msgstr ""
+"选择特殊音频设备,或者由 windows 确定 (默认),更改需要重新启动 VLC 才能生效。"
+
+#: modules/audio_output/waveout.c:94
+msgid "Default Audio Device"
+msgstr "默认音频设备"
+
+#: modules/audio_output/waveout.c:98
+msgid "Win32 waveOut extension output"
+msgstr "Win32 waveOut 扩展输出"
+
+#: modules/audio_output/windows_audio_common.h:145
+msgid "Use float32 output"
+msgstr "使用浮点 32 输出"
+
+#: modules/audio_output/windows_audio_common.h:147
+msgid ""
+"The option allows you to enable or disable the high-quality float32 audio "
+"output mode (which is not well supported by some soundcards)."
+msgstr ""
+"此选项将允许您开启或关闭高质量浮点 32 音频输出模式 (可能某些声卡无法很好的支"
+"持)。"
+
+#: modules/codec/a52.c:49
+msgid "A/52 parser"
+msgstr "A/52 解析器"
+
+#: modules/codec/a52.c:56
+msgid "A/52 audio packetizer"
+msgstr "A/52 音频分包器"
+
+#: modules/codec/adpcm.c:48
+msgid "ADPCM audio decoder"
+msgstr "ADPCM 音频解码器"
+
+#: modules/codec/aes3.c:48
+msgid "AES3/SMPTE 302M audio decoder"
+msgstr "AES3/SMPTE 302M 音频解码器"
+
+#: modules/codec/aes3.c:53
+msgid "AES3/SMPTE 302M audio packetizer"
+msgstr "AES3/SMPTE 302M 音频封包器"
+
+#: modules/codec/araw.c:49
+msgid "Raw/Log Audio decoder"
+msgstr "原始/Log 音频解码器"
+
+#: modules/codec/araw.c:58
+msgid "Raw audio encoder"
+msgstr "原始音频解码器"
+
+#: modules/codec/avcodec/avcodec.c:74
+msgid "Non-ref"
+msgstr "非参考"
+
+#: modules/codec/avcodec/avcodec.c:74
+msgid "Bidir"
+msgstr "双向"
+
+#: modules/codec/avcodec/avcodec.c:74
+msgid "Non-key"
+msgstr "非关键"
+
+#: modules/codec/avcodec/avcodec.c:74 modules/gui/macosx/prefs.m:207
+#: modules/gui/macosx/simple_prefs.m:307
+#: modules/gui/qt4/dialogs/preferences.cpp:70
+msgid "All"
+msgstr "全部"
+
+#: modules/codec/avcodec/avcodec.c:79
+msgid "rd"
+msgstr "rd"
+
+#: modules/codec/avcodec/avcodec.c:79
+msgid "bits"
+msgstr "位"
+
+#: modules/codec/avcodec/avcodec.c:79
+msgid "simple"
+msgstr "采样"
+
+#: modules/codec/avcodec/avcodec.c:90
+msgid ""
+"Various audio and video decoders/encoders delivered by the FFmpeg library. "
+"This includes (MS)MPEG4, DivX, SV1,H261, H263, H264, WMV, WMA, AAC, AMR, DV, "
+"MJPEG and other codecs"
+msgstr ""
+"FFmpeg 库提供了多个音频和视频解码器/编码器。它包含了 (MS)MPEG4, DivX, SV1,"
+"H261, H263, H264, WMV, WMA, AAC, AMR, DV, MJPEG 以及其他编解码器"
+
+#: modules/codec/avcodec/avcodec.c:102
+msgid "AltiVec FFmpeg audio/video decoder ((MS)MPEG4,SVQ1,H263,WMV,WMA)"
+msgstr "AltiVec FFmpeg 音频/视频解码器 ((MS)MPEG4,SVQ1,H263,WMV,WMA)"
+
+#: modules/codec/avcodec/avcodec.c:106
+msgid "FFmpeg audio/video decoder"
+msgstr "FFmpeg 音频/视频解码器"
+
+#: modules/codec/avcodec/avcodec.c:110 modules/codec/omxil/omxil.c:93
+msgid "Decoding"
+msgstr "正在解码"
+
+#: modules/codec/avcodec/avcodec.c:152 modules/codec/omxil/omxil.c:102
+msgid "Encoding"
+msgstr "正在编码"
+
+#: modules/codec/avcodec/avcodec.c:153
+msgid "FFmpeg audio/video encoder"
+msgstr "FFmpeg 音频/视频编码器"
+
+#: modules/codec/avcodec/avcodec.c:216
+msgid "FFmpeg deinterlace video filter"
+msgstr "FFmpeg 反交错视频滤镜"
+
+#: modules/codec/avcodec/avcodec.h:72 modules/codec/avcodec/avcodec.h:74
+msgid "Direct rendering"
+msgstr "直接渲染"
+
+#: modules/codec/avcodec/avcodec.h:76
+msgid "Error resilience"
+msgstr "弹性错误"
+
+#: modules/codec/avcodec/avcodec.h:78
+msgid ""
+"FFmpeg can do error resilience.\n"
+"However, with a buggy encoder (such as the ISO MPEG-4 encoder from M$) this "
+"can produce a lot of errors.\n"
+"Valid values range from 0 to 4 (0 disables all errors resilience)."
+msgstr ""
+"Ffmpeg 可以执行弹性错误。\n"
+"但是如果遇到了一个有问题的编码器 (例如 M$ 的 ISO MPEG-4 编码器) 这就可能产生"
+"很多错误。\n"
+"有效值范围从 0 到 4 (0 表示关闭所有弹性错误)。"
+
+#: modules/codec/avcodec/avcodec.h:83
+msgid "Workaround bugs"
+msgstr "工作区 bug"
+
+#: modules/codec/avcodec/avcodec.h:85
+msgid ""
+"Try to fix some bugs:\n"
+"1 autodetect\n"
+"2 old msmpeg4\n"
+"4 xvid interlaced\n"
+"8 ump4 \n"
+"16 no padding\n"
+"32 ac vlc\n"
+"64 Qpel chroma.\n"
+"This must be the sum of the values. For example, to fix \"ac vlc\" and "
+"\"ump4\", enter 40."
+msgstr ""
+"尝试修正一些问题:\n"
+"1 自动检测\n"
+"2 旧 msmpeg4\n"
+"4 xvid 反交错\n"
+"8 ump4 \n"
+"16 未填充\n"
+"32 ac vlc\n"
+"64 Qpel 色度。\n"
+"这必须是值的和。例如要修正 \"ac vlc\" 和 \"ump4\",则输入 40。"
+
+#: modules/codec/avcodec/avcodec.h:96 modules/codec/avcodec/avcodec.h:202
+#: modules/demux/rawdv.c:40 modules/stream_out/transcode/transcode.c:139
+msgid "Hurry up"
+msgstr "紧急"
+
+#: modules/codec/avcodec/avcodec.h:98
+msgid ""
+"The decoder can partially decode or skip frame(s) when there is not enough "
+"time. It's useful with low CPU power but it can produce distorted pictures."
+msgstr ""
+"解码器在时间不充足的情况下可能部分解码器或跳过帧。在 CPU 不是很强大时这非常有"
+"用,但是可能会破坏图像。"
+
+#: modules/codec/avcodec/avcodec.h:102
+msgid "Allow speed tricks"
+msgstr "允许非正常速度优化"
+
+#: modules/codec/avcodec/avcodec.h:104
+msgid ""
+"Allow non specification compliant speedup tricks. Faster but error-prone."
+msgstr "允许不符合标准的速度优化。更快但可能会出错。"
+
+#: modules/codec/avcodec/avcodec.h:106
+msgid "Skip frame (default=0)"
+msgstr "跳帧 (默认=0)"
+
+#: modules/codec/avcodec/avcodec.h:108
+msgid ""
+"Force skipping of frames to speed up decoding (-1=None, 0=Default, 1=B-"
+"frames, 2=P-frames, 3=B+P frames, 4=all frames)."
+msgstr ""
+"强制跳帧来加速解码 (-1=无, 0=默认, 1=B 帧, 2=P 帧, 3=B+P 帧, 4=全部帧)。"
+
+#: modules/codec/avcodec/avcodec.h:111
+msgid "Skip idct (default=0)"
+msgstr "跳过 idct (默认=0)"
+
+#: modules/codec/avcodec/avcodec.h:113
+msgid ""
+"Force skipping of idct to speed up decoding for frame types(-1=None, "
+"0=Default, 1=B-frames, 2=P-frames, 3=B+P frames, 4=all frames)."
+msgstr ""
+"强制跳过 idct 来加速某些帧的解码 (-1=无, 0=默认, 1=B 帧, 2=P 帧, 3=B+P 帧, 4="
+"全部帧)。"
+
+#: modules/codec/avcodec/avcodec.h:116
+msgid "Debug mask"
+msgstr "调试掩码"
+
+#: modules/codec/avcodec/avcodec.h:117
+msgid "Set FFmpeg debug mask"
+msgstr "设置 FFmpeg 的调试掩码"
+
+#: modules/codec/avcodec/avcodec.h:120
+msgid "Visualize motion vectors"
+msgstr "可视化运动向量"
+
+#: modules/codec/avcodec/avcodec.h:122
+msgid ""
+"You can overlay the motion vectors (arrows showing how the images move) on "
+"the image. This value is a mask, based on these values:\n"
+"1 - visualize forward predicted MVs of P frames\n"
+"2 - visualize forward predicted MVs of B frames\n"
+"4 - visualize backward predicted MVs of B frames\n"
+"To visualize all vectors, the value should be 7."
+msgstr ""
+"您可以覆盖图像上的运行向量 (显示如何移动图像的方向)。此值为掩码,基于下列"
+"值:\n"
+"1 - 可视化向前预告 MVs 的 P 帧\n"
+"2 - 可视化向前预告 MVs 的 B 帧\n"
+"4 - 可视化向后预告 MVs 的 B 帧\n"
+"要可视化所有向量, 值应该为 7。"
+
+#: modules/codec/avcodec/avcodec.h:129
+msgid "Low resolution decoding"
+msgstr "低分辨率解码"
+
+#: modules/codec/avcodec/avcodec.h:130
+msgid ""
+"Only decode a low resolution version of the video. This requires less "
+"processing power"
+msgstr "仅解码视频的低分辨率版本。这仅需要很少的处理器资源"
+
+#: modules/codec/avcodec/avcodec.h:133 modules/gui/macosx/simple_prefs.m:262
+msgid "Skip the loop filter for H.264 decoding"
+msgstr "用于 H.264 解码的跳过循环滤镜"
+
+#: modules/codec/avcodec/avcodec.h:134
+msgid ""
+"Skipping the loop filter (aka deblocking) usually has a detrimental effect "
+"on quality. However it provides a big speedup for high definition streams."
+msgstr ""
+"跳过循环滤镜 (aka 去块) 通常对图像质量会造成不良的效果。但是它能为高分辨率的"
+"流提供一个很大的提速。"
+
+#: modules/codec/avcodec/avcodec.h:138
+msgid "Hardware decoding"
+msgstr "硬件解码"
+
+#: modules/codec/avcodec/avcodec.h:139
+msgid "This allows hardware decoding when available."
+msgstr "这将允许硬件解码(当硬件解码可用时)。"
+
+#: modules/codec/avcodec/avcodec.h:141
+msgid "Threads"
+msgstr "线程"
+
+#: modules/codec/avcodec/avcodec.h:142
+msgid "Number of threads used for decoding, 0 meaning auto"
+msgstr "用于解码的线程数量,0 表示自动决定"
+
+#: modules/codec/avcodec/avcodec.h:149
+msgid "Ratio of key frames"
+msgstr "关键帧率"
+
+#: modules/codec/avcodec/avcodec.h:150
+msgid "Number of frames that will be coded for one key frame."
+msgstr "一个关键帧所包含的帧数。"
+
+#: modules/codec/avcodec/avcodec.h:153
+msgid "Ratio of B frames"
+msgstr "B 帧率"
+
+#: modules/codec/avcodec/avcodec.h:154
+msgid "Number of B frames that will be coded between two reference frames."
+msgstr "在两个参考帧之间将被标识为 B 帧的数量。"
+
+#: modules/codec/avcodec/avcodec.h:157
+msgid "Video bitrate tolerance"
+msgstr "视频位率偏差"
+
+#: modules/codec/avcodec/avcodec.h:158
+msgid "Video bitrate tolerance in kbit/s."
+msgstr "以 kbits/s 为单位的视频位率偏差。"
+
+#: modules/codec/avcodec/avcodec.h:160
+msgid "Interlaced encoding"
+msgstr "交错编码"
+
+#: modules/codec/avcodec/avcodec.h:161
+msgid "Enable dedicated algorithms for interlaced frames."
+msgstr "为交错的帧开启专用的算法。"
+
+#: modules/codec/avcodec/avcodec.h:164
+msgid "Interlaced motion estimation"
+msgstr "交错运动估算"
+
+#: modules/codec/avcodec/avcodec.h:165
+msgid "Enable interlaced motion estimation algorithms. This requires more CPU."
+msgstr "开启交错运动估算算法。这需要较多的 CPU 资源。"
+
+#: modules/codec/avcodec/avcodec.h:168
+msgid "Pre-motion estimation"
+msgstr "预欲动估算"
+
+#: modules/codec/avcodec/avcodec.h:169
+msgid "Enable the pre-motion estimation algorithm."
+msgstr "开启预运动估算算法。"
+
+#: modules/codec/avcodec/avcodec.h:172
+msgid "Rate control buffer size"
+msgstr "速率控制缓存大小"
+
+#: modules/codec/avcodec/avcodec.h:173
+msgid ""
+"Rate control buffer size (in kbytes). A bigger buffer will allow for better "
+"rate control, but will cause a delay in the stream."
+msgstr ""
+"速率控制缓存大小 (以千字节为单位)。一个较大的缓存将会有较佳的帧率控制,但是可"
+"能会导致流的延迟。"
+
+#: modules/codec/avcodec/avcodec.h:177
+msgid "Rate control buffer aggressiveness"
+msgstr "帧率控制缓存激进性"
+
+#: modules/codec/avcodec/avcodec.h:178
+msgid "Rate control buffer aggressiveness."
+msgstr "帧率控制缓存激进性。"
+
+#: modules/codec/avcodec/avcodec.h:181
+msgid "I quantization factor"
+msgstr "I 量化因数"
+
+#: modules/codec/avcodec/avcodec.h:183
+msgid ""
+"Quantization factor of I frames, compared with P frames (for instance 1.0 => "
+"same qscale for I and P frames)."
+msgstr "I 帧的量化因数,与 P 帧相比较 (例如 1.0 => 相同比例的 I 和 P 帧)。"
+
+#: modules/codec/avcodec/avcodec.h:186 modules/codec/x264.c:329
+#: modules/demux/mod.c:78
+msgid "Noise reduction"
+msgstr "噪点消除"
+
+#: modules/codec/avcodec/avcodec.h:187
+msgid ""
+"Enable a simple noise reduction algorithm to lower the encoding length and "
+"bitrate, at the expense of lower quality frames."
+msgstr ""
+"开启一个简易的噪点消除算法仅在损失很小质量的画面的情况下通过降低编码长度和位"
+"率的方法消除噪点。"
+
+#: modules/codec/avcodec/avcodec.h:191
+msgid "MPEG4 quantization matrix"
+msgstr "MPEG4 量化矩阵"
+
+#: modules/codec/avcodec/avcodec.h:192
+msgid ""
+"Use the MPEG4 quantization matrix for MPEG2 encoding. This generally yields "
+"a better looking picture, while still retaining the compatibility with "
+"standard MPEG2 decoders."
+msgstr ""
+"为 MPEG2 编码使用 MPEG4 量化矩阵。通常这会产生质量较高的图像,但是还会保留与"
+"标准 MPEG2 解码器的兼容性。"
+
+#: modules/codec/avcodec/avcodec.h:197
+msgid "Quality level"
+msgstr "质量等级"
+
+#: modules/codec/avcodec/avcodec.h:198
+msgid ""
+"Quality level for the encoding of motions vectors (this can slow down the "
+"encoding very much)."
+msgstr "用于编码的动态向量的质量等级 (这可能会大大降低编码速度)。"
+
+#: modules/codec/avcodec/avcodec.h:203
+msgid ""
+"The encoder can make on-the-fly quality tradeoffs if your CPU can't keep up "
+"with the encoding rate. It will disable trellis quantization, then the rate "
+"distortion of motion vectors (hq), and raise the noise reduction threshold "
+"to ease the encoder's task."
+msgstr ""
+"如果您的 CPU 无法保持编码率那么编码器可以生成一个比较匆忙的质量权衡。它将会关"
+"闭格式结构量化,以及动态向量 (hq) 的速率失真并改善噪点消除阀来改善编码器的任"
+"务。"
+
+#: modules/codec/avcodec/avcodec.h:209
+msgid "Minimum video quantizer scale"
+msgstr "最小视频向量化比例"
+
+#: modules/codec/avcodec/avcodec.h:210
+msgid "Minimum video quantizer scale."
+msgstr "最小视频向量化比例。"
+
+#: modules/codec/avcodec/avcodec.h:213
+msgid "Maximum video quantizer scale"
+msgstr "最大视频向量化比例"
+
+#: modules/codec/avcodec/avcodec.h:214
+msgid "Maximum video quantizer scale."
+msgstr "最大视频向量化比例。"
+
+#: modules/codec/avcodec/avcodec.h:217
+msgid "Trellis quantization"
+msgstr "格式向量化"
+
+#: modules/codec/avcodec/avcodec.h:218
+msgid "Enable trellis quantization (rate distortion for block coefficients)."
+msgstr "开启格式向量化 (用于填充系数的速率失真)。"
+
+#: modules/codec/avcodec/avcodec.h:221
+msgid "Fixed quantizer scale"
+msgstr "固定量化比例"
+
+#: modules/codec/avcodec/avcodec.h:222
+msgid ""
+"A fixed video quantizer scale for VBR encoding (accepted values: 0.01 to "
+"255.0)."
+msgstr "为 VBR 编码固定视频量化比例 (允许值: 0.01 到 255.0)。"
+
+#: modules/codec/avcodec/avcodec.h:225
+msgid "Strict standard compliance"
+msgstr "严格标准的一致"
+
+#: modules/codec/avcodec/avcodec.h:226
+msgid ""
+"Force a strict standard compliance when encoding (accepted values: -1, 0, 1)."
+msgstr "在编码时强制严格标准的一致 (允许值: -1, 0, 1)。"
+
+#: modules/codec/avcodec/avcodec.h:229
+msgid "Luminance masking"
+msgstr "明亮掩码"
+
+#: modules/codec/avcodec/avcodec.h:230
+msgid "Raise the quantizer for very bright macroblocks (default: 0.0)."
+msgstr "为非常高亮度的宏块提升量化 (默认: 0.0)。"
+
+#: modules/codec/avcodec/avcodec.h:233
+msgid "Darkness masking"
+msgstr "阴暗掩码"
+
+#: modules/codec/avcodec/avcodec.h:234
+msgid "Raise the quantizer for very dark macroblocks (default: 0.0)."
+msgstr "为非常暗的宏块提升量化 (默认: 0.0)。"
+
+#: modules/codec/avcodec/avcodec.h:237
+msgid "Motion masking"
+msgstr "运动掩码"
+
+#: modules/codec/avcodec/avcodec.h:238
+msgid ""
+"Raise the quantizer for macroblocks with a high temporal complexity "
+"(default: 0.0)."
+msgstr "为高时间的复杂运动的宏块提升量化 (默认: 0.0)。"
+
+#: modules/codec/avcodec/avcodec.h:241
+msgid "Border masking"
+msgstr "边框掩码"
+
+#: modules/codec/avcodec/avcodec.h:242
+msgid ""
+"Raise the quantizer for macroblocks at the border of the frame (default: "
+"0.0)."
+msgstr "为带有边框的宏块提升量化 (默认: 0.0)。"
+
+#: modules/codec/avcodec/avcodec.h:245
+msgid "Luminance elimination"
+msgstr "亮度消除"
+
+#: modules/codec/avcodec/avcodec.h:246
+msgid ""
+"Eliminates luminance blocks when the PSNR isn't much changed (default: 0.0). "
+"The H264 specification recommends -4."
+msgstr ""
+"在 PSNR 不是改变的很多的情况下消除亮度块 (默认: 0.0)。H264 规格推荐为 -4。"
+
+#: modules/codec/avcodec/avcodec.h:250
+msgid "Chrominance elimination"
+msgstr "色度消除"
+
+#: modules/codec/avcodec/avcodec.h:251
+msgid ""
+"Eliminates chrominance blocks when the PSNR isn't much changed (default: "
+"0.0). The H264 specification recommends 7."
+msgstr ""
+"在 PSNR 不是改变的很多的情况下消除色度块 (默认: 0.0)。H264 规格推荐为 7。"
+
+#: modules/codec/avcodec/avcodec.h:255
+msgid "Specify AAC audio profile to use"
+msgstr "指定要使用的 AAC 音频方案"
+
+#: modules/codec/avcodec/avcodec.h:256
+msgid ""
+"Specify the AAC audio profile to use for encoding the audio bitstream. It "
+"takes the following options: main, low, ssr (not supported) and ltp "
+"(default: main)"
+msgstr ""
+"指定要用于编码音频位流的 AAC 音频方案。它有下列选项: 主、低、ssr (不推荐) 和 "
+"ltp (默认: 主)"
+
+#: modules/codec/avcodec/encoder.c:225
+#, c-format
+msgid "\"%s\" is no video encoder."
+msgstr "\"%s\" 不是视频编码器。"
+
+#: modules/codec/avcodec/encoder.c:233
+#, c-format
+msgid "\"%s\" is no audio encoder."
+msgstr "\"%s\" 不是音频编码器。"
+
+#: modules/codec/avcodec/encoder.c:259
+#, c-format
+msgid ""
+"It seems your FFMPEG (libavcodec) installation lacks the following encoder:\n"
+"%s.\n"
+"If you don't know how to fix this, ask for support from your distribution.\n"
+"\n"
+"This is not an error inside VLC media player.\n"
+"Do not contact the VideoLAN project about this issue.\n"
+msgstr ""
+"看上去您的 FFMPEG (libavcodec) 安装缺少下列编码器:\n"
+"%s。\n"
+"如果您不知道如何修正此问题,请向您的发布商寻求支持。\n"
+"\n"
+"这不是一个 VLC media player 内部的错误。\n"
+"请不要向 VideoLAN 项目报告此问题。\n"
+
+#: modules/codec/avcodec/encoder.c:693 modules/codec/avcodec/encoder.c:702
+msgid "VLC could not open the encoder."
+msgstr "VLC 无法打开编码器。"
+
+#: modules/codec/cc.c:61
+msgid "CC 608/708"
+msgstr "CC 608/708"
+
+#: modules/codec/cc.c:62
+msgid "Closed Captions decoder"
+msgstr "封闭字幕解码器"
+
+#: modules/codec/cdg.c:87
+msgid "CDG video decoder"
+msgstr "CDG 视频解码器"
+
+#: modules/codec/cvdsub.c:50
+msgid "CVD subtitle decoder"
+msgstr "CVD 字幕解码器"
+
+#: modules/codec/cvdsub.c:55
+msgid "Chaoji VCD subtitle packetizer"
+msgstr "Chaoji VCD 字幕分包器"
+
+#: modules/codec/dirac.c:61
+msgid "Constant quality factor"
+msgstr "恒定质量因子"
+
+#: modules/codec/dirac.c:62
+msgid "If bitrate=0, use this value for constant quality"
+msgstr "如位率=0,使用此数值以得到恒定质量"
+
+#: modules/codec/dirac.c:65
+msgid "CBR bitrate (kbps)"
+msgstr "CBR 位率 (kb/秒)"
+
+#: modules/codec/dirac.c:66
+msgid "A value > 0 enables constant bitrate mode"
+msgstr "大于零的值将启用常位率模式"
+
+#: modules/codec/dirac.c:69
+msgid "Enable lossless coding"
+msgstr "启用无损编码"
+
+#: modules/codec/dirac.c:70
+msgid ""
+"Lossless coding ignores bitrate and quality settings, allowing for perfect "
+"reproduction of the original"
+msgstr "无损编码将忽略码率和质量设置,以完美再现原始质量"
+
+#: modules/codec/dirac.c:74
+msgid "Prefilter"
+msgstr "预过滤器"
+
+#: modules/codec/dirac.c:75
+msgid "Enable adaptive prefiltering"
+msgstr "启用自适应预过滤"
+
+#: modules/codec/dirac.c:79
+msgid "Centre Weighted Median"
+msgstr "中央重心"
+
+#: modules/codec/dirac.c:80
+msgid "Rectangular Linear Phase"
+msgstr "长方形线性阶段"
+
+#: modules/codec/dirac.c:80
+msgid "Diagonal Linear Phase"
+msgstr "对角线线性阶段"
+
+#: modules/codec/dirac.c:83
+msgid "Amount of prefiltering"
+msgstr "预过滤总量"
+
+#: modules/codec/dirac.c:84
+msgid "Higher value implies more prefiltering"
+msgstr "较高数值意味着更多的预过滤"
+
+#: modules/codec/dirac.c:87
+msgid "Chroma format"
+msgstr "色度格式"
+
+#: modules/codec/dirac.c:88
+msgid ""
+"Picking chroma format will force a conversion of the video into that format"
+msgstr "选择色度格式将强行将视频转换为所选格式"
+
+#: modules/codec/dirac.c:93
+msgid "4:2:0"
+msgstr "4:2:0"
+
+#: modules/codec/dirac.c:93
+msgid "4:2:2"
+msgstr "4:2:2"
+
+#: modules/codec/dirac.c:93
+msgid "4:4:4"
+msgstr "4:4:4"
+
+#: modules/codec/dirac.c:96
+msgid "Distance between 'P' frames"
+msgstr "'P' 帧间的距离"
+
+#: modules/codec/dirac.c:100
+msgid "Number of 'P' frames per GOP"
+msgstr "每 GOP 的 'P' 帧数目"
+
+#: modules/codec/dirac.c:104
+msgid "Picture coding mode"
+msgstr "图片编码模式"
+
+#: modules/codec/dirac.c:105
+msgid ""
+"Field coding is where interlaced fields are coded seperately as opposed to a "
+"pseudo-progressive frame"
+msgstr "分场编码即隔行扫描的场将被分别编码,而不是伪逐行扫描帧"
+
+#: modules/codec/dirac.c:110
+msgid "auto - let encoder decide based upon input (Best)"
+msgstr "音频 - 由编码器基于输入内容决定 (最佳)"
+
+#: modules/codec/dirac.c:111
+msgid "force coding frame as single picture"
+msgstr "强制编码的帧为单一画面"
+
+#: modules/codec/dirac.c:112
+msgid "force coding frame as seperate interlaced fields"
+msgstr "强制编码的帧为复合的隔行扫描段"
+
+#: modules/codec/dirac.c:116
+msgid "Width of motion compensation blocks"
+msgstr "运动补偿块宽度"
+
+#: modules/codec/dirac.c:120
+msgid "Height of motion compensation blocks"
+msgstr "运动补偿块高度"
+
+#: modules/codec/dirac.c:125
+msgid "Block overlap (%)"
+msgstr "块重叠 (%)"
+
+#: modules/codec/dirac.c:126
+msgid "Amount that each motion block should be overlapped by its neighbours"
+msgstr "各移动块与附近块重叠的量"
+
+#: modules/codec/dirac.c:131
+msgid "xblen"
+msgstr "横向块长"
+
+#: modules/codec/dirac.c:132
+msgid "Total horizontal block length including overlaps"
+msgstr "总水平块长(含重叠部分)"
+
+#: modules/codec/dirac.c:136
+msgid "yblen"
+msgstr "纵向块长"
+
+#: modules/codec/dirac.c:137
+msgid "Total vertical block length including overlaps"
+msgstr "总垂直块长(含重叠部分)"
+
+#: modules/codec/dirac.c:140
+msgid "Motion vector precision"
+msgstr "动作向量精确度"
+
+#: modules/codec/dirac.c:141
+msgid "Motion vector precision in pels."
+msgstr "运动矢量的精度(单位为像素)。"
+
+#: modules/codec/dirac.c:146
+msgid "Simple ME search area x:y"
+msgstr "简单 ME 搜索区域 x:y"
+
+#: modules/codec/dirac.c:147
+msgid ""
+"(Not recommended) Perform a simple (non hierarchical block matching motion "
+"vector search with search range of +/-x, +/-y"
+msgstr ""
+"(不推荐) 在 +/-x, +/-y 的区间内进一次简易的 (非分级) 块匹配运动向量搜索"
+
+#: modules/codec/dirac.c:152
+msgid "Three component motion estimation"
+msgstr "三原色动作估计"
+
+#: modules/codec/dirac.c:153
+msgid "Use chroma as part of the motion estimation process"
+msgstr "将色度用作运动估算过程的一部分"
+
+#: modules/codec/dirac.c:156
+msgid "Intra picture DWT filter"
+msgstr "图片内 DWT 滤镜"
+
+#: modules/codec/dirac.c:160
+msgid "Inter picture DWT filter"
+msgstr "图片间 DWT 滤镜"
+
+#: modules/codec/dirac.c:164
+msgid "Number of DWT iterations"
+msgstr "DWT 反复数目"
+
+#: modules/codec/dirac.c:165
+msgid "Also known as DWT levels"
+msgstr "又称 DWT 级别"
+
+#: modules/codec/dirac.c:169
+msgid "Enable multiple quantizers"
+msgstr "启用多个量化器"
+
+#: modules/codec/dirac.c:170
+msgid "Enable multiple quantizers per subband (one per codeblock)"
+msgstr "启用多重子带量化 (每个码块一次)"
+
+#: modules/codec/dirac.c:174
+msgid "Enable spatial partitioning"
+msgstr "启用空间化分割"
+
+#: modules/codec/dirac.c:178
+msgid "Disable arithmetic coding"
+msgstr "禁用算术编码"
+
+#: modules/codec/dirac.c:179
+msgid "Use variable length codes instead, useful for very high bitrates"
+msgstr "改用可变长码,码率非常高时很有用"
+
+#: modules/codec/dirac.c:184
+msgid "cycles per degree"
+msgstr "每 cycle 角度值"
+
+#: modules/codec/dirac.c:206
+msgid "Dirac video encoder using dirac-research library"
+msgstr "Dirac 视频编码器使用 dirac-research 库"
+
+#: modules/codec/dmo/dmo.c:101
+msgid "DirectMedia Object decoder"
+msgstr "DirectMedia Object 解码器"
+
+#: modules/codec/dmo/dmo.c:110
+msgid "DirectMedia Object encoder"
+msgstr "DirectMedia Object 编码器"
+
+#: modules/codec/dts.c:49
+msgid "DTS parser"
+msgstr "DTS 解析器"
+
+#: modules/codec/dts.c:54
+msgid "DTS audio packetizer"
+msgstr "DTS 音频分包器"
+
+#: modules/codec/dvbsub.c:83
+msgid "Decoding X coordinate"
+msgstr "解码 X 坐标"
+
+#: modules/codec/dvbsub.c:84
+msgid "X coordinate of the rendered subtitle"
+msgstr "渲染字幕的 X 坐标"
+
+#: modules/codec/dvbsub.c:86
+msgid "Decoding Y coordinate"
+msgstr "解码 Y 坐标"
+
+#: modules/codec/dvbsub.c:87
+msgid "Y coordinate of the rendered subtitle"
+msgstr "渲染字幕的 Y 坐标"
+
+#: modules/codec/dvbsub.c:89
+msgid "Subpicture position"
+msgstr "子画面位置"
+
+#: modules/codec/dvbsub.c:91
+msgid ""
+"You can enforce the subpicture position on the video (0=center, 1=left, "
+"2=right, 4=top, 8=bottom, you can also use combinations of these values, e."
+"g. 6=top-right)."
+msgstr ""
+"您可以强制指定视频上子画面的位置 (0=居中、1=左、2=右、4=上、8=下,您也可以合"
+"并使用这些值,例如 6=右上)。"
+
+#: modules/codec/dvbsub.c:95
+msgid "Encoding X coordinate"
+msgstr "编码 X 坐标"
+
+#: modules/codec/dvbsub.c:96
+msgid "X coordinate of the encoded subtitle"
+msgstr "编码字幕的 X 坐标"
+
+#: modules/codec/dvbsub.c:97
+msgid "Encoding Y coordinate"
+msgstr "编码 Y 坐标"
+
+#: modules/codec/dvbsub.c:98
+msgid "Y coordinate of the encoded subtitle"
+msgstr "编码字幕的 Y 坐标"
+
+#: modules/codec/dvbsub.c:118
+msgid "DVB subtitles decoder"
+msgstr "DVB 字幕解码器"
+
+#: modules/codec/dvbsub.c:119 modules/demux/ts.c:3493 modules/demux/ts.c:3551
+msgid "DVB subtitles"
+msgstr "DVB 字幕"
+
+#: modules/codec/dvbsub.c:132
+msgid "DVB subtitles encoder"
+msgstr "DVB 字幕编码器"
+
+#: modules/codec/faad.c:45
+msgid "AAC audio decoder (using libfaad2)"
+msgstr "AAC 音频解码器 (使用 libfaad2)"
+
+#: modules/codec/faad.c:388
+msgid "AAC extension"
+msgstr "AAC 扩展"
+
+#: modules/codec/flac.c:134
+msgid "Flac audio decoder"
+msgstr "Flac 音频解码器"
+
+#: modules/codec/flac.c:140
+msgid "Flac audio encoder"
+msgstr "Flac 音频编码器"
+
+#: modules/codec/fluidsynth.c:49
+msgid "Sound fonts (required)"
+msgstr "音源 (必须)"
+
+#: modules/codec/fluidsynth.c:51
+msgid "A sound fonts file is required for software synthesis."
+msgstr "用于软件合成器的音源文件。"
+
+#: modules/codec/fluidsynth.c:57
+msgid "FluidSynth MIDI synthetizer"
+msgstr "FluidSynth MIDI 合成器"
+
+#: modules/codec/fluidsynth.c:59
+msgid "FluidSynth"
+msgstr "FluidSynth"
+
+#: modules/codec/fluidsynth.c:93 modules/codec/fluidsynth.c:118
+msgid "MIDI synthesis not set up"
+msgstr "未配置 MIDI 合成"
+
+#: modules/codec/fluidsynth.c:94
+msgid ""
+"A sound font file (.SF2) is required for MIDI synthesis.\n"
+"Please install a sound font and configure it from the VLC preferences "
+"(Codecs / Audio / FluidSynth).\n"
+msgstr ""
+"MIDI 合成需要音源文件 (.SF2)。\n"
+"请安装音源文件,并在 VLC 首选项中配置之 (编解码器 / 音频 / FluidSynth)。\n"
+
+#: modules/codec/fluidsynth.c:119
+#, c-format
+msgid ""
+"The specified sound font file (%s) is incorrect.\n"
+"Please install a valid sound font and reconfigure it from the VLC "
+"preferences (Codecs / Audio / FluidSynth).\n"
+msgstr ""
+"指定的音源文件 (%s) 不正确。\n"
+"请安装有效的音源文件,并在 VLC 首选项中重新配置 (编解码器 / 音频 / "
+"FluidSynth)。\n"
+
+#: modules/codec/invmem.c:54 modules/video_output/vmem.c:43
+msgid "Video memory buffer width."
+msgstr "视频内存缓冲宽度。"
+
+#: modules/codec/invmem.c:57 modules/video_output/vmem.c:46
+msgid "Video memory buffer height."
+msgstr "视频内存缓冲高度。"
+
+#: modules/codec/invmem.c:59 modules/video_output/vmem.c:55
+msgid "Lock function"
+msgstr "锁定函数"
+
+#: modules/codec/invmem.c:60
+msgid ""
+"Address of the locking callback function. This function must return a valid "
+"memory address for use by the video renderer."
+msgstr "锁定回调函数的地址。此功能必须返回一个有效的内存地址供视频渲染器使用。"
+
+#: modules/codec/invmem.c:64 modules/video_output/vmem.c:60
+msgid "Unlock function"
+msgstr "取消锁定函数"
+
+#: modules/codec/invmem.c:65 modules/video_output/vmem.c:61
+msgid "Address of the unlocking callback function"
+msgstr "取消锁定回调函数的地址"
+
+#: modules/codec/invmem.c:68 modules/video_output/vmem.c:64
+msgid "Data for the locking and unlocking functions"
+msgstr "用于锁定和取消锁定函数的数据"
+
+#: modules/codec/invmem.c:70 modules/video_output/snapshot.c:61
+#: modules/video_output/vmem.c:51
+msgid "Chroma"
+msgstr "色度"
+
+#: modules/codec/invmem.c:71 modules/video_output/vmem.c:52
+msgid ""
+"Output chroma for the memory image as a 4-character string, eg. \"RV32\"."
+msgstr "用于内存图像的 4 字节输出色度,例如 \"RV32\"。"
+
+#: modules/codec/invmem.c:77 modules/codec/invmem.c:78
+msgid "Memory video decoder"
+msgstr "内存视频解码器"
+
+#: modules/codec/kate.c:194 modules/codec/subtitles/subsdec.c:196
+msgid "Formatted Subtitles"
+msgstr "格式化字幕"
+
+#: modules/codec/kate.c:195
+msgid ""
+"Kate streams allow for text formatting. VLC partly implements this, but you "
+"can choose to disable all formatting.Note that this has no effect is "
+"rendering via Tiger is enabled."
+msgstr ""
+"Kate 流 允许文本格式化。VLC 部分支持此功能,但您可以选择禁用所有格式。注意:"
+"如果启用了“通过 Tiger 渲染”,本选项将不起作用。"
+
+#: modules/codec/kate.c:202
+msgid "Shadow"
+msgstr "阴影"
+
+#: modules/codec/kate.c:202 modules/misc/freetype.c:134
+msgid "Outline"
+msgstr "轮廓"
+
+#: modules/codec/kate.c:210 modules/gui/fbosd.c:171
+#: modules/misc/freetype.c:141 modules/misc/quartztext.c:98
+#: modules/misc/win32text.c:88 modules/video_filter/marq.c:59
+#: modules/video_filter/rss.c:71
+msgid "Black"
+msgstr "黑色"
+
+#: modules/codec/kate.c:210 modules/gui/fbosd.c:172
+#: modules/misc/freetype.c:141 modules/misc/quartztext.c:98
+#: modules/misc/win32text.c:88 modules/video_filter/marq.c:59
+#: modules/video_filter/rss.c:72
+msgid "Gray"
+msgstr "灰色"
+
+#: modules/codec/kate.c:210 modules/gui/fbosd.c:172
+#: modules/misc/freetype.c:141 modules/misc/quartztext.c:98
+#: modules/misc/win32text.c:88 modules/video_filter/marq.c:60
+#: modules/video_filter/rss.c:72
+msgid "Silver"
+msgstr "银色"
+
+#: modules/codec/kate.c:210 modules/gui/fbosd.c:172
+#: modules/misc/freetype.c:141 modules/misc/quartztext.c:98
+#: modules/misc/win32text.c:88 modules/video_filter/ball.c:130
+#: modules/video_filter/marq.c:60 modules/video_filter/rss.c:72
+msgid "White"
+msgstr "白色"
+
+#: modules/codec/kate.c:210 modules/gui/fbosd.c:172
+#: modules/misc/freetype.c:141 modules/misc/quartztext.c:98
+#: modules/misc/win32text.c:88 modules/video_filter/marq.c:60
+#: modules/video_filter/rss.c:72
+msgid "Maroon"
+msgstr "栗色"
+
+#: modules/codec/kate.c:211 modules/gui/fbosd.c:172
+#: modules/gui/macosx/controls.m:542 modules/gui/macosx/intf.m:706
+#: modules/misc/freetype.c:142 modules/misc/quartztext.c:99
+#: modules/misc/win32text.c:89 modules/video_filter/ball.c:129
+#: modules/video_filter/colorthres.c:64 modules/video_filter/marq.c:60
+#: modules/video_filter/rss.c:72
+msgid "Red"
+msgstr "红色"
+
+#: modules/codec/kate.c:211 modules/gui/fbosd.c:173
+#: modules/misc/freetype.c:142 modules/misc/quartztext.c:99
+#: modules/misc/win32text.c:89 modules/video_filter/colorthres.c:64
+#: modules/video_filter/marq.c:61 modules/video_filter/rss.c:73
+msgid "Fuchsia"
+msgstr "紫红色"
+
+#: modules/codec/kate.c:211 modules/gui/fbosd.c:173
+#: modules/gui/macosx/controls.m:546 modules/gui/macosx/intf.m:708
+#: modules/misc/freetype.c:142 modules/misc/quartztext.c:99
+#: modules/misc/win32text.c:89 modules/video_filter/colorthres.c:64
+#: modules/video_filter/marq.c:61 modules/video_filter/rss.c:73
+msgid "Yellow"
+msgstr "黄色"
+
+#: modules/codec/kate.c:211 modules/gui/fbosd.c:173
+#: modules/misc/freetype.c:142 modules/misc/quartztext.c:99
+#: modules/misc/win32text.c:89 modules/video_filter/marq.c:61
+#: modules/video_filter/rss.c:73
+msgid "Olive"
+msgstr "橄榄绿"
+
+#: modules/codec/kate.c:211 modules/gui/fbosd.c:173
+#: modules/gui/macosx/controls.m:544 modules/gui/macosx/intf.m:707
+#: modules/misc/freetype.c:142 modules/misc/quartztext.c:99
+#: modules/misc/win32text.c:89 modules/video_filter/ball.c:129
+#: modules/video_filter/marq.c:61 modules/video_filter/rss.c:73
+msgid "Green"
+msgstr "绿色"
+
+#: modules/codec/kate.c:211 modules/gui/fbosd.c:174
+#: modules/misc/freetype.c:142 modules/misc/quartztext.c:99
+#: modules/misc/win32text.c:89 modules/video_filter/marq.c:62
+#: modules/video_filter/rss.c:74
+msgid "Teal"
+msgstr "凫蓝色"
+
+#: modules/codec/kate.c:212 modules/gui/fbosd.c:174
+#: modules/misc/freetype.c:143 modules/misc/quartztext.c:100
+#: modules/misc/win32text.c:90 modules/video_filter/colorthres.c:64
+#: modules/video_filter/marq.c:62 modules/video_filter/rss.c:74
+msgid "Lime"
+msgstr "酸橙绿色"
+
+#: modules/codec/kate.c:212 modules/gui/fbosd.c:174
+#: modules/misc/freetype.c:143 modules/misc/quartztext.c:100
+#: modules/misc/win32text.c:90 modules/video_filter/marq.c:62
+#: modules/video_filter/rss.c:74
+msgid "Purple"
+msgstr "紫色"
+
+#: modules/codec/kate.c:212 modules/gui/fbosd.c:174
+#: modules/misc/freetype.c:143 modules/misc/quartztext.c:100
+#: modules/misc/win32text.c:90 modules/video_filter/marq.c:62
+#: modules/video_filter/rss.c:74
+msgid "Navy"
+msgstr "藏青色"
+
+#: modules/codec/kate.c:212 modules/gui/fbosd.c:174
+#: modules/gui/macosx/controls.m:548 modules/gui/macosx/intf.m:709
+#: modules/misc/freetype.c:143 modules/misc/quartztext.c:100
+#: modules/misc/win32text.c:90 modules/video_filter/ball.c:130
+#: modules/video_filter/colorthres.c:64 modules/video_filter/marq.c:62
+#: modules/video_filter/rss.c:74
+msgid "Blue"
+msgstr "蓝色"
+
+#: modules/codec/kate.c:212 modules/gui/fbosd.c:175
+#: modules/misc/freetype.c:143 modules/misc/quartztext.c:100
+#: modules/misc/win32text.c:90 modules/video_filter/colorthres.c:64
+#: modules/video_filter/marq.c:63 modules/video_filter/rss.c:75
+msgid "Aqua"
+msgstr "水蓝色"
+
+#: modules/codec/kate.c:214
+msgid "Use Tiger for rendering"
+msgstr "使用 Tiger 渲染"
+
+#: modules/codec/kate.c:215
+msgid ""
+"Kate streams can be rendered using the Tiger library. Disabling this will "
+"only render static text and bitmap based streams."
+msgstr ""
+"Kate 流可以使用 Tiger 库渲染。禁用此选项将只渲染静态文本及基于位图的流。"
+
+#: modules/codec/kate.c:219
+msgid "Rendering quality"
+msgstr "渲染质量"
+
+#: modules/codec/kate.c:220
+msgid ""
+"Select rendering quality, at the expense of speed. 0 is fastest, 1 is "
+"highest quality."
+msgstr "选择渲染质量,将影响速度。0 最快,1 质量最高。"
+
+#: modules/codec/kate.c:224
+msgid "Default font effect"
+msgstr "默认字体效果"
+
+#: modules/codec/kate.c:225
+msgid ""
+"Add a font effect to text to improve readability against different "
+"backgrounds."
+msgstr "为文本添加字体外观以提升在不同背景下的可读性。"
+
+#: modules/codec/kate.c:229
+msgid "Default font effect strength"
+msgstr "默认字体效果强度"
+
+#: modules/codec/kate.c:230
+msgid "How pronounced to make the chosen font effect (effect dependent)."
+msgstr "发音如何影响字体外观 (需要外观支持)。"
+
+#: modules/codec/kate.c:234
+msgid "Default font description"
+msgstr "默认字体描述"
+
+#: modules/codec/kate.c:235
+msgid ""
+"Which font description to use if the Kate stream does not specify particular "
+"font parameters (name, size, etc) to use. A blank name will let Tiger choose "
+"font parameters where appropriate."
+msgstr ""
+"Kate 流未指定要使用的字体参数 (名称、大小等) 时要使用的字体描述。如果名称留"
+"空,Tiger 将自动选取适当的字体参数。"
+
+#: modules/codec/kate.c:240
+msgid "Default font color"
+msgstr "默认字体颜色"
+
+#: modules/codec/kate.c:241
+msgid ""
+"Default font color to use if the Kate stream does not specify a particular "
+"font color to use."
+msgstr "Kate 流未指定要使用的字体颜色时要使用的默认字体颜色。"
+
+#: modules/codec/kate.c:245
+msgid "Default font alpha"
+msgstr "默认字体透明度"
+
+#: modules/codec/kate.c:246
+msgid ""
+"Transparency of the default font color if the Kate stream does not specify a "
+"particular font color to use."
+msgstr "Kate 流未指定要使用的字体颜色时要使用的默认字体颜色透明度。"
+
+#: modules/codec/kate.c:250
+msgid "Default background color"
+msgstr "默认背景颜色"
+
+#: modules/codec/kate.c:251
+msgid ""
+"Default background color if the Kate stream does not specify a background "
+"color to use."
+msgstr "Kate 流未指定要使用的背景颜色时要使用的默认背景色。"
+
+#: modules/codec/kate.c:255
+msgid "Default background alpha"
+msgstr "默认背景透明度"
+
+#: modules/codec/kate.c:256
+msgid ""
+"Transparency of the default background color if the Kate stream does not "
+"specify a particular background color to use."
+msgstr "Kate 流未指定要使用的背景颜色时要使用的默认背景色透明度。"
+
+#: modules/codec/kate.c:262
+msgid ""
+"Kate is a codec for text and image based overlays.\n"
+"The Tiger rendering library is needed to render complex Kate streams, but "
+"VLC can still render static text and image based subtitles if it is not "
+"available.\n"
+"Note that changing settings below will not take effect until a new stream is "
+"played. This will hopefully be fixed soon."
+msgstr ""
+"Kate 是一款文本与图像覆盖层编解码器。\n"
+"要渲染复杂的 Kate 流需要 Tiger 渲染库,但即使没有,VLC 也能渲染静态文本和基于"
+"图像的字幕。\n"
+"注意,在播放新流之前对以下设置的更改将不会生效。有望尽早修复。"
+
+#: modules/codec/kate.c:271
+msgid "Kate"
+msgstr "Kate"
+
+#: modules/codec/kate.c:272
+msgid "Kate overlay decoder"
+msgstr "Kate 重叠解码器"
+
+#: modules/codec/kate.c:291
+msgid "Tiger rendering defaults"
+msgstr "Tiger 渲染默认设定"
+
+#: modules/codec/kate.c:327
+msgid "Kate text subtitles packetizer"
+msgstr "Kate 文本字幕分包器"
+
+#: modules/codec/libass.c:64
+msgid "Subtitles (advanced)"
+msgstr "字幕 (高级)"
+
+#: modules/codec/libass.c:65
+msgid "Subtitle renderers using libass"
+msgstr "使用 libass 渲染字幕"
+
+#: modules/codec/libass.c:740 modules/misc/freetype.c:357
+msgid "Building font cache"
+msgstr "正在创建字体缓存"
+
+#: modules/codec/libass.c:741
+msgid ""
+"Please wait while your font cache is rebuilt.\n"
+"This should take less than a minute."
+msgstr ""
+"正在重建字体缓存,请稍候。\n"
+"这应该能在一分钟内完成。"
+
+#: modules/codec/libmpeg2.c:128
+msgid "MPEG I/II video decoder (using libmpeg2)"
+msgstr "MPEG I/II 视频解码器 (使用 libmpeg2)"
+
+#: modules/codec/lpcm.c:52
+msgid "Linear PCM audio decoder"
+msgstr "线性 PCM 音频解码器"
+
+#: modules/codec/lpcm.c:57
+msgid "Linear PCM audio packetizer"
+msgstr "线性 PCM 音频分包器"
+
+#: modules/codec/mash.cpp:70
+msgid "Video decoder using openmash"
+msgstr "使用 openmash 视频解码器"
+
+#: modules/codec/mpeg_audio.c:114
+msgid "MPEG audio layer I/II/III decoder"
+msgstr "MPEG 音频层 I/II/III 解码器"
+
+#: modules/codec/mpeg_audio.c:125
+msgid "MPEG audio layer I/II/III packetizer"
+msgstr "MPEG 音频层 I/II/III 分包器"
+
+#: modules/codec/omxil/omxil.c:90
+msgid "Audio/Video decoder (using OpenMAX IL)"
+msgstr "音频/视频解码器 (使用 OpenMAX IL)"
+
+#: modules/codec/omxil/omxil.c:103
+msgid "Video encoder (using OpenMAX IL)"
+msgstr "视频编码器 (使用 OpenMAX IL)"
+
+#: modules/codec/png.c:58
+msgid "PNG video decoder"
+msgstr "PNG 视频解码器"
+
+#: modules/codec/quicktime.c:67
+msgid "QuickTime library decoder"
+msgstr "QuickTime 库解码器"
+
+#: modules/codec/rawvideo.c:71
+msgid "Pseudo raw video decoder"
+msgstr "Pseudo raw 视频解码器"
+
+#: modules/codec/rawvideo.c:78
+msgid "Pseudo raw video packetizer"
+msgstr "Pseudo raw 视频分包器"
+
+#: modules/codec/realvideo.c:131
+msgid "RealVideo library decoder"
+msgstr "RealVideo 库解码器"
+
+#: modules/codec/schroedinger.c:50
+msgid "Schroedinger video decoder"
+msgstr "Schroedinger 视频解码器"
+
+#: modules/codec/sdl_image.c:60
+msgid "SDL Image decoder"
+msgstr "SDL 图像解码器"
+
+#: modules/codec/sdl_image.c:61
+msgid "SDL_image video decoder"
+msgstr "SDL_image 视频解码器"
+
+#: modules/codec/shine/shine_mod.c:66
+msgid "MP3 fixed point audio encoder"
+msgstr "MP3 定点音频编码器"
+
+#: modules/codec/speex.c:57 modules/codec/speex.c:800
+#: modules/gui/macosx/open.m:209
+msgid "Mode"
+msgstr "模式"
+
+#: modules/codec/speex.c:59
+msgid "Enforce the mode of the encoder."
+msgstr "强制编码器的模式。"
+
+#: modules/codec/speex.c:61 modules/codec/theora.c:96
+#: modules/codec/twolame.c:55 modules/codec/vorbis.c:171
+msgid "Encoding quality"
+msgstr "编码质量"
+
+#: modules/codec/speex.c:63
+msgid "Enforce a quality between 0 (low) and 10 (high)."
+msgstr "强制一个从 0 (低) 到 10 (高) 的质量值。"
+
+#: modules/codec/speex.c:65
+msgid "Encoding complexity"
+msgstr "编码复杂度"
+
+#: modules/codec/speex.c:67
+msgid "Enforce the complexity of the encoder."
+msgstr "强制编码器的复杂度。"
+
+#: modules/codec/speex.c:69
+msgid "Maximal bitrate"
+msgstr "最大位率"
+
+#: modules/codec/speex.c:71
+msgid "Enforce the maximal VBR bitrate"
+msgstr "强制 VBR 位率的最大值"
+
+#: modules/codec/speex.c:73 modules/codec/vorbis.c:181
+msgid "CBR encoding"
+msgstr "CBR 编码"
+
+#: modules/codec/speex.c:75
+msgid ""
+"Enforce a constant bitrate encoding (CBR) instead of default variable "
+"bitrate encoding (VBR)."
+msgstr "强制进行恒定码率编码 (CBR) 而不是默认的动态码率编码 (VBR)。"
+
+#: modules/codec/speex.c:78
+msgid "Voice activity detection"
+msgstr "语音活动检测"
+
+#: modules/codec/speex.c:80
+msgid ""
+"Enable voice activity detection (VAD). It is automatically activated in VBR "
+"mode."
+msgstr "启用语音活动检测 (VAD)。在 VBR 模式中会自动激活。"
+
+#: modules/codec/speex.c:83
+msgid "Discontinuous Transmission"
+msgstr "非连续传输"
+
+#: modules/codec/speex.c:85
+msgid "Enable discontinuous transmission (DTX)."
+msgstr "启用非连续传输 (DTX)。"
+
+#: modules/codec/speex.c:89
+msgid "Narrow-band (8kHz)"
+msgstr "短波 (8kHz)"
+
+#: modules/codec/speex.c:89
+msgid "Wide-band (16kHz)"
+msgstr "长波 (16kHz)"
+
+#: modules/codec/speex.c:89
+msgid "Ultra-wideband (32kHz)"
+msgstr "超长波 (32kHz)"
+
+#: modules/codec/speex.c:96
+msgid "Speex audio decoder"
+msgstr "Speex 音频解码器"
+
+#: modules/codec/speex.c:98
+msgid "Speex"
+msgstr "Speex"
+
+#: modules/codec/speex.c:102
+msgid "Speex audio packetizer"
+msgstr "Speex 音频封包器"
+
+#: modules/codec/speex.c:107
+msgid "Speex audio encoder"
+msgstr "Speex 音频编码器"
+
+#: modules/codec/spudec/spudec.c:45
+msgid "Disable DVD subtitle transparency"
+msgstr "禁用 DVD 字幕透明"
+
+#: modules/codec/spudec/spudec.c:46
+msgid "Removes all transparency effects used in DVD subtitles."
+msgstr "移除 DVD 字幕所使用的所有透明特效。"
+
+#: modules/codec/spudec/spudec.c:50
+msgid "DVD subtitles decoder"
+msgstr "DVD 字幕解码器"
+
+#: modules/codec/spudec/spudec.c:51
+msgid "DVD subtitles"
+msgstr "DVD 字幕"
+
+#: modules/codec/spudec/spudec.c:60
+msgid "DVD subtitles packetizer"
+msgstr "DVD 字幕封包器"
+
+#: modules/codec/subtitles/subsdec.c:98
+msgid "Universal (UTF-8)"
+msgstr "通用 (UTF-8)"
+
+#: modules/codec/subtitles/subsdec.c:99
+msgid "Universal (UTF-16)"
+msgstr "通用 (UTF-16)"
+
+#: modules/codec/subtitles/subsdec.c:100
+msgid "Universal (big endian UTF-16)"
+msgstr "通用 (big endian UTF-16)"
+
+#: modules/codec/subtitles/subsdec.c:101
+msgid "Universal (little endian UTF-16)"
+msgstr "通用 (little endian UTF-16)"
+
+#: modules/codec/subtitles/subsdec.c:102
+msgid "Universal, Chinese (GB18030)"
+msgstr "通用,中文 (GB18030)"
+
+#: modules/codec/subtitles/subsdec.c:106
+msgid "Western European (Latin-9)"
+msgstr "西欧 (Latin-9)"
+
+#: modules/codec/subtitles/subsdec.c:107
+msgid "Western European (Windows-1252)"
+msgstr "西欧 (Windows-1252)"
+
+#: modules/codec/subtitles/subsdec.c:109
+msgid "Eastern European (Latin-2)"
+msgstr "东欧 (Latin-2)"
+
+#: modules/codec/subtitles/subsdec.c:110
+msgid "Eastern European (Windows-1250)"
+msgstr "东欧 (Windows-1250)"
+
+#: modules/codec/subtitles/subsdec.c:112
+msgid "Esperanto (Latin-3)"
+msgstr "世界语 (Latin-3)"
+
+#: modules/codec/subtitles/subsdec.c:114
+msgid "Nordic (Latin-6)"
+msgstr "北欧语系 (Latin-6)"
+
+#: modules/codec/subtitles/subsdec.c:116
+msgid "Cyrillic (Windows-1251)"
+msgstr "西里尔语 (Windows-1251)"
+
+#: modules/codec/subtitles/subsdec.c:117
+msgid "Russian (KOI8-R)"
+msgstr "俄语 (KOI8-R)"
+
+#: modules/codec/subtitles/subsdec.c:118
+msgid "Ukrainian (KOI8-U)"
+msgstr "乌克兰语 (KOI8-U)"
+
+#: modules/codec/subtitles/subsdec.c:120
+msgid "Arabic (ISO 8859-6)"
+msgstr "阿拉伯语 (ISO 8859-6)"
+
+#: modules/codec/subtitles/subsdec.c:121
+msgid "Arabic (Windows-1256)"
+msgstr "阿拉伯语 (Windows-1256)"
+
+#: modules/codec/subtitles/subsdec.c:123
+msgid "Greek (ISO 8859-7)"
+msgstr "希腊语 (ISO 8859-7)"
+
+#: modules/codec/subtitles/subsdec.c:124
+msgid "Greek (Windows-1253)"
+msgstr "希腊语 (Windows-1253)"
+
+#: modules/codec/subtitles/subsdec.c:126
+msgid "Hebrew (ISO 8859-8)"
+msgstr "希伯来语 (ISO 8859-8)"
+
+#: modules/codec/subtitles/subsdec.c:127
+msgid "Hebrew (Windows-1255)"
+msgstr "希伯来语 (Windows-1255)"
+
+#: modules/codec/subtitles/subsdec.c:129
+msgid "Turkish (ISO 8859-9)"
+msgstr "土耳其语 (ISO 8859-9)"
+
+#: modules/codec/subtitles/subsdec.c:130
+msgid "Turkish (Windows-1254)"
+msgstr "土耳其语 (Windows-1254)"
+
+#: modules/codec/subtitles/subsdec.c:133
+msgid "Thai (TIS 620-2533/ISO 8859-11)"
+msgstr "泰语 (TIS 620-2533/ISO 8859-11)"
+
+#: modules/codec/subtitles/subsdec.c:134
+msgid "Thai (Windows-874)"
+msgstr "泰语 (Windows-874)"
+
+#: modules/codec/subtitles/subsdec.c:136
+msgid "Baltic (Latin-7)"
+msgstr "波罗地海语 (Latin-7)"
+
+#: modules/codec/subtitles/subsdec.c:137
+msgid "Baltic (Windows-1257)"
+msgstr "波罗地海语 (Windows-1257)"
+
+#: modules/codec/subtitles/subsdec.c:140
+msgid "Celtic (Latin-8)"
+msgstr "凯尔特语 (Latin-8)"
+
+#: modules/codec/subtitles/subsdec.c:143
+msgid "South-Eastern European (Latin-10)"
+msgstr "欧洲东南部语言 (Latin-10)"
+
+#: modules/codec/subtitles/subsdec.c:145
+msgid "Simplified Chinese (ISO-2022-CN-EXT)"
+msgstr "简体中文 (ISO-2022-CN-EXT)"
+
+#: modules/codec/subtitles/subsdec.c:146
+msgid "Simplified Chinese Unix (EUC-CN)"
+msgstr "简体中文 Unix (EUC-CN)"
+
+#: modules/codec/subtitles/subsdec.c:147
+msgid "Japanese (7-bits JIS/ISO-2022-JP-2)"
+msgstr "日语 (7 位 JIS/ISO-2022-JP-2)"
+
+#: modules/codec/subtitles/subsdec.c:148
+msgid "Japanese Unix (EUC-JP)"
+msgstr "日语 Unix (EUC-JP)"
+
+#: modules/codec/subtitles/subsdec.c:149
+msgid "Japanese (Shift JIS)"
+msgstr "日语 (Shift JIS)"
+
+#: modules/codec/subtitles/subsdec.c:150
+msgid "Korean (EUC-KR/CP949)"
+msgstr "朝鲜语 (EUC-KR/CP949)"
+
+#: modules/codec/subtitles/subsdec.c:151
+msgid "Korean (ISO-2022-KR)"
+msgstr "朝鲜语 (ISO-2022-KR)"
+
+#: modules/codec/subtitles/subsdec.c:152
+msgid "Traditional Chinese (Big5)"
+msgstr "繁体中文 (Big5)"
+
+#: modules/codec/subtitles/subsdec.c:153
+msgid "Traditional Chinese Unix (EUC-TW)"
+msgstr "繁体中文 Unix (EUC-TW)"
+
+#: modules/codec/subtitles/subsdec.c:154
+msgid "Hong-Kong Supplementary (HKSCS)"
+msgstr "香港增补 (HKSCS)"
+
+#: modules/codec/subtitles/subsdec.c:156
+msgid "Vietnamese (VISCII)"
+msgstr "越南语 (VISCII)"
+
+#: modules/codec/subtitles/subsdec.c:157
+msgid "Vietnamese (Windows-1258)"
+msgstr "越南语 (Windows-1258)"
+
+#: modules/codec/subtitles/subsdec.c:189
+msgid "Subtitles text encoding"
+msgstr "字幕文本编码"
+
+#: modules/codec/subtitles/subsdec.c:190
+msgid "Set the encoding used in text subtitles"
+msgstr "设置在文本字幕中使用的编码"
+
+#: modules/codec/subtitles/subsdec.c:191
+msgid "Subtitles justification"
+msgstr "字幕调整"
+
+#: modules/codec/subtitles/subsdec.c:192
+msgid "Set the justification of subtitles"
+msgstr "设置字幕调整"
+
+#: modules/codec/subtitles/subsdec.c:193
+msgid "UTF-8 subtitles autodetection"
+msgstr "自动检测 UTF-8 字幕"
+
+#: modules/codec/subtitles/subsdec.c:194
+msgid ""
+"This enables automatic detection of UTF-8 encoding within subtitles files."
+msgstr "这将开启自动检测字幕文件内的 UTF-8 编码。"
+
+#: modules/codec/subtitles/subsdec.c:197
+msgid ""
+"Some subtitle formats allow for text formatting. VLC partly implements this, "
+"but you can choose to disable all formatting."
+msgstr ""
+"有些字幕格式允许格式化文本。VLC 将部分处理它,但是您可以选择关闭所有格式。"
+
+#: modules/codec/subtitles/subsdec.c:203
+msgid "Text subtitles decoder"
+msgstr "文本字幕解码器"
+
+#. xgettext:
+#. The Windows ANSI code page most commonly used for this language.
+#. VLC uses this as a guess of the subtitle files character set
+#. (if UTF-8 and UTF-16 autodetection fails).
+#. Western European languages normally use "CP1252", which is a
+#. Microsoft-variant of ISO 8859-1. That suits the Latin alphabet.
+#. Other scripts use other code pages.
+#.
+#. This MUST be a valid iconv character set. If unsure, please refer
+#. the VideoLAN translators mailing list.
+#: modules/codec/subtitles/subsdec.c:296
+msgctxt "GetACP"
+msgid "CP1252"
+msgstr "GB18030"
+
+#: modules/codec/subtitles/subsusf.c:52
+msgid "USFSubs"
+msgstr "USFSubs"
+
+#: modules/codec/subtitles/subsusf.c:53
+msgid "USF subtitles decoder"
+msgstr "USF 字幕解码器"
+
+#: modules/codec/subtitles/t140.c:35
+msgid "T.140 text encoder"
+msgstr "T.140 文本编码器"
+
+#: modules/codec/svcdsub.c:46
+msgid "Enable debug"
+msgstr "开启调试"
+
+#: modules/codec/svcdsub.c:49
+msgid ""
+"This integer when viewed in binary is a debugging mask\n"
+"calls 1\n"
+"packet assembly info 2\n"
+msgstr ""
+"此整数将在二进制视图中作为调试掩码\n"
+"调用 1\n"
+"数据包分配信息 2\n"
+
+#: modules/codec/svcdsub.c:54
+msgid "Philips OGT (SVCD subtitle) decoder"
+msgstr "Philips OGT (SVCD 字幕) 解码器"
+
+#: modules/codec/svcdsub.c:55
+msgid "SVCD subtitles"
+msgstr "SVCD 字幕"
+
+#: modules/codec/svcdsub.c:65
+msgid "Philips OGT (SVCD subtitle) packetizer"
+msgstr "Philips OGT (SVCD 字幕) 分包器"
+
+#: modules/codec/telx.c:54
+msgid "Override page"
+msgstr "覆盖页"
+
+#: modules/codec/telx.c:55
+msgid ""
+"Override the indicated page, try this if your subtitles don't appear (-1 = "
+"autodetect from TS, 0 = autodetect from teletext, >0 = actual page number, "
+"usually 888 or 889)."
+msgstr ""
+"覆盖指示页,如果您的字幕不显示请尝试它 (-1 = 从 TS 自动检测、0 = 从 teletext "
+"自动检测,>0 = 实际的页编号,通常是 888 或 889)。"
+
+#: modules/codec/telx.c:60
+msgid "Ignore subtitle flag"
+msgstr "忽略字幕标志"
+
+#: modules/codec/telx.c:61
+msgid "Ignore the subtitle flag, try this if your subtitles don't appear."
+msgstr "忽略字幕标志,如果您的字幕不显示请尝试它。"
+
+#: modules/codec/telx.c:64
+msgid "Workaround for France"
+msgstr "针对法国的修正"
+
+#: modules/codec/telx.c:65
+msgid ""
+"Some French channels do not flag their subtitling pages correctly due to a "
+"historical interpretation mistake. Try using this wrong interpretation if "
+"your subtitles don't appear."
+msgstr ""
+"由于历史上的错误一些法国频道没有正确标识出它们的字幕页。如果您的字幕没有显示"
+"请尝试这些错误的指示。"
+
+#: modules/codec/telx.c:71
+msgid "Teletext subtitles decoder"
+msgstr "Teletext 字幕解码器"
+
+#: modules/codec/theora.c:98 modules/codec/vorbis.c:173
+msgid ""
+"Enforce a quality between 1 (low) and 10 (high), instead of specifying a "
+"particular bitrate. This will produce a VBR stream."
+msgstr ""
+"强制指定一个 1 (低) 到 10 (高) 之间的质量,而不是指定一个特定的位速率。这将会"
+"生成一个 VBR 流。"
+
+#: modules/codec/theora.c:105
+msgid "Theora video decoder"
+msgstr "Theora 视频解码器"
+
+#: modules/codec/theora.c:111
+msgid "Theora video packetizer"
+msgstr "Theora 视频分包器"
+
+#: modules/codec/theora.c:117
+msgid "Theora video encoder"
+msgstr "Theora 视频编码器"
+
+#: modules/codec/twolame.c:57
+msgid ""
+"Force a specific encoding quality between 0.0 (high) and 50.0 (low), instead "
+"of specifying a particular bitrate. This will produce a VBR stream."
+msgstr ""
+"强制指定一个 0.0 (低) 到 50.0 (高) 之间的编码质量,而不是指定一个特定的位速"
+"率。这将会生成一个 VBR 流。"
+
+#: modules/codec/twolame.c:60
+msgid "Stereo mode"
+msgstr "立体声模式"
+
+#: modules/codec/twolame.c:61
+msgid "Handling mode for stereo streams"
+msgstr "立体声流的处理模式"
+
+#: modules/codec/twolame.c:62
+msgid "VBR mode"
+msgstr "VBR 模式"
+
+#: modules/codec/twolame.c:64
+msgid "Use Variable BitRate. Default is to use Constant BitRate (CBR)."
+msgstr "使用可变位率。默认使用固定位率 (CBR)。"
+
+#: modules/codec/twolame.c:65
+msgid "Psycho-acoustic model"
+msgstr "心理声学模型"
+
+#: modules/codec/twolame.c:67
+msgid "Integer from -1 (no model) to 4."
+msgstr "从 -1 (无模型) 到 4 的整数。"
+
+#: modules/codec/twolame.c:71
+msgid "Dual mono"
+msgstr "双单声道"
+
+#: modules/codec/twolame.c:71
+msgid "Joint stereo"
+msgstr "联合立体声"
+
+#: modules/codec/twolame.c:76
+msgid "Libtwolame audio encoder"
+msgstr "Libtwolame 音频解码器"
+
+#: modules/codec/vorbis.c:175
+msgid "Maximum encoding bitrate"
+msgstr "最大编码位率"
+
+#: modules/codec/vorbis.c:177
+msgid "Maximum bitrate in kbps. This is useful for streaming applications."
+msgstr "以 kbps 为单位的最大位率。这对流应用程序来说非常有用。"
+
+#: modules/codec/vorbis.c:178
+msgid "Minimum encoding bitrate"
+msgstr "最小编码位率"
+
+#: modules/codec/vorbis.c:180
+msgid ""
+"Minimum bitrate in kbps. This is useful for encoding for a fixed-size "
+"channel."
+msgstr "以 kbps 为单位的最小位率。这对编码固定大小的频道来说非常有用。"
+
+#: modules/codec/vorbis.c:183
+msgid "Force a constant bitrate encoding (CBR)."
+msgstr "强制固定位率编码 (CBR)。"
+
+#: modules/codec/vorbis.c:187
+msgid "Vorbis audio decoder"
+msgstr "Vorbis 音频解码器"
+
+#: modules/codec/vorbis.c:198
+msgid "Vorbis audio packetizer"
+msgstr "Vorbis 音频分包器"
+
+#: modules/codec/vorbis.c:205
+msgid "Vorbis audio encoder"
+msgstr "Vorbis 音频编码器"
+
+#: modules/codec/wmafixed/wma.c:83
+msgid "WMA v1/v2 fixed point audio decoder"
+msgstr "WMA v1/v2 定点音频解码器"
+
+#: modules/codec/x264.c:55
+msgid "Maximum GOP size"
+msgstr "最大 GOP 大小"
+
+#: modules/codec/x264.c:56
+msgid ""
+"Sets maximum interval between IDR-frames.Larger values save bits, thus "
+"improving quality for a given bitrate at the cost of seeking precision."
+msgstr ""
+"设置 IDR 帧之间的最大间隔。较大的帧将节省大小,并改进在给予为率下的搜索精确性"
+"质量。"
+
+#: modules/codec/x264.c:60
+msgid "Minimum GOP size"
+msgstr "最小 GOP 大小"
+
+#: modules/codec/x264.c:61
+msgid ""
+"Sets minimum interval between IDR-frames. In H.264, I-frames do not "
+"necessarily bound a closed GOP because it is allowable for a P-frame to be "
+"predicted from more frames than just the one frame before it (also see "
+"reference frame option). Therefore, I-frames are not necessarily seekable. "
+"IDR-frames restrict subsequent P-frames from referring to any frame prior to "
+"the IDR-frame. \n"
+"If scenecuts appear within this interval, they are still encoded as I-"
+"frames, but do not start a new GOP."
+msgstr ""
+"设置 IDR 帧之间的最小间隔。在 H.264 中 I 帧没有必要绑定一个封闭的 GOP,因为它"
+"允许在它之前预测更多的帧 (也可以查看参考帧选项)。因此 I 帧没有搜索的必要。"
+"IDR 帧将从任意参考帧之前限制之后的 P 帧。\n"
+"如果场景出现在此间隔内,它们还是将会被编码为 I 帧,但是不启动一个新的 GOP。"
+
+#: modules/codec/x264.c:70
+msgid "Extra I-frames aggressivity"
+msgstr "扩展 I 帧激进性"
+
+#: modules/codec/x264.c:71
+msgid ""
+"Scene-cut detection. Controls how aggressively to insert extra I-frames. "
+"With small values of scenecut, the codec often has to force an I-frame when "
+"it would exceed keyint. Good values of scenecut may find a better location "
+"for the I-frame. Large values use more I-frames than necessary, thus wasting "
+"bits. -1 disables scene-cut detection, so I-frames are inserted only every "
+"other keyint frames, which probably leads to ugly encoding artifacts. Range "
+"1 to 100."
+msgstr ""
+"场景剪辑检测。控制如何主动的插入额外的 I 帧。较小的场景剪辑值,编码器将会经常"
+"在超过关键值时强制一个 I 帧。较好的场景剪辑值可能会为 I 帧查找一个较佳的位"
+"置。较大的值将使用尽可能多的 I 帧,因此产生不必要的体积增加。-1 为关闭场景剪"
+"辑检测,所以 I 帧将会被插入到每个 keyint 帧中,这可能会导致编码效率的降低。范"
+"围是 1 到 100。"
+
+#: modules/codec/x264.c:82
+msgid "B-frames between I and P"
+msgstr "在 I 和 P 之间的 B 帧"
+
+#: modules/codec/x264.c:83
+msgid "Number of consecutive B-frames between I and P-frames. Range 1 to 16."
+msgstr "在 I 和 P 帧之间的连续 B 帧。范围是 1 到 16。"
+
+#: modules/codec/x264.c:86
+msgid "Adaptive B-frame decision"
+msgstr "适应 B 帧检测"
+
+#: modules/codec/x264.c:87
+msgid ""
+"Force the specified number of consecutive B-frames to be used, except "
+"possibly before an I-frame.Range 0 to 2."
+msgstr "强制使用指定数量的连续 B 帧,除非可能是 I 帧前的 B 帧。范围由 0 到 2。"
+
+#: modules/codec/x264.c:91
+msgid "Influence (bias) B-frames usage"
+msgstr "影响 (倾向) B 帧用法"
+
+#: modules/codec/x264.c:92
+msgid ""
+"Bias the choice to use B-frames. Positive values cause more B-frames, "
+"negative values cause less B-frames."
+msgstr "倾向使用 B 帧。积极的值将造成更多的 B 帧, 保守的值将造成较少的 B 帧。"
+
+#: modules/codec/x264.c:96
+msgid "Keep some B-frames as references"
+msgstr "保留一些 B 帧作为参考"
+
+#: modules/codec/x264.c:97
+msgid ""
+"Allows B-frames to be used as references for predicting other frames. Keeps "
+"the middle of 2+ consecutive B-frames as a reference, and reorders frame "
+"appropriately.\n"
+" - none: Disabled\n"
+" - strict: Strictly hierarchical pyramid\n"
+" - normal: Non-strict (not Blu-ray compatible)\n"
+msgstr ""
+"允许将 B 用作预测其他帧的参考。保留连续超过 2 个 B 帧的中间部分作为参考,并适"
+"当重排帧。\n"
+" - none: 禁用\n"
+" - strict: 严格的等级椎\n"
+" - normal: 不严格 (与 Blu-ray 不兼容)\n"
+
+#: modules/codec/x264.c:105
+msgid "CABAC"
+msgstr "CABAC"
+
+#: modules/codec/x264.c:106
+msgid ""
+"CABAC (Context-Adaptive Binary Arithmetic Coding). Slightly slows down "
+"encoding and decoding, but should save 10 to 15% bitrate."
+msgstr ""
+"CABAC (内容适应二进制算法编码)。将轻微的降速编码和解码, 但是会节省 10 到 15% "
+"位率。"
+
+#: modules/codec/x264.c:110
+msgid "Number of reference frames"
+msgstr "参考帧数量"
+
+#: modules/codec/x264.c:111
+msgid ""
+"Number of previous frames used as predictors. This is effective in Anime, "
+"but seems to make little difference in live-action source material. Some "
+"decoders are unable to deal with large frameref values. Range 1 to 16."
+msgstr ""
+"用作预测的前帧数量。这在动画中非常有效,但是可能会造成看上去和原始版本稍有差"
+"异。某些解码器可能无法分析大的参考帧值。范围是 1 到 16。"
+
+#: modules/codec/x264.c:116
+msgid "Skip loop filter"
+msgstr "跳过循环滤镜"
+
+#: modules/codec/x264.c:117
+msgid "Deactivate the deblocking loop filter (decreases quality)."
+msgstr "取消去块循环滤镜 (降低质量)。"
+
+#: modules/codec/x264.c:119
+msgid "Loop filter AlphaC0 and Beta parameters alpha:beta"
+msgstr "循环滤镜 AlphaCO 和 Beta 参数 alpha: beta"
+
+#: modules/codec/x264.c:120
+msgid ""
+"Loop filter AlphaC0 and Beta parameters. Range -6 to 6 for both alpha and "
+"beta parameters. -6 means light filter, 6 means strong."
+msgstr ""
+"循环滤镜 AlphaCO 和 Beta 参数。alpha 和 beta 参数的范围是 -6 到 6。-6 表示很"
+"少的过滤,6 表示强过滤。"
+
+#: modules/codec/x264.c:124
+msgid "H.264 level"
+msgstr "H.264 等级"
+
+#: modules/codec/x264.c:125
+msgid ""
+"Specify H.264 level (as defined by Annex A of the standard). Levels are not "
+"enforced; it's up to the user to select a level compatible with the rest of "
+"the encoding options. Range 1 to 5.1 (10 to 51 is also allowed). Set to 0 "
+"for letting x264 set level."
+msgstr ""
+"指定 H.264 等级 (如 Annex A 标准所定)。等级不是强制的;而是取决于用户所选的与"
+"其它编码选项相兼容的等级。范围从 1 到 5.1 (10 到 51 也允许使用)。设为 0 可以"
+"让 x264 自行设置等级。"
+
+#: modules/codec/x264.c:130
+msgid "H.264 profile"
+msgstr "H.264 档案"
+
+#: modules/codec/x264.c:131
+msgid "Specify H.264 profile which limits are enforced overother settings"
+msgstr "指定 H.264 profile,将对已有设置强加限制"
+
+#: modules/codec/x264.c:137
+msgid "Interlaced mode"
+msgstr "交错模式"
+
+#: modules/codec/x264.c:138
+msgid "Pure-interlaced mode."
+msgstr "纯交错模式。"
+
+#: modules/codec/x264.c:140
+msgid "Use Periodic Intra Refresh"
+msgstr "使用周期性的内部刷新"
+
+#: modules/codec/x264.c:141
+msgid "Use Periodic Intra Refresh instead of IDR frames"
+msgstr "使用周期性的内部刷新而不是 IDR 帧"
+
+#: modules/codec/x264.c:143
+msgid "Use mb-tree ratecontrol"
+msgstr "使用 mb-tree 速率控制"
+
+#: modules/codec/x264.c:144
+msgid "You can disable use of Macroblock-tree on ratecontrol"
+msgstr "您可以禁用 Macroblock-tree 宏块树速率控制"
+
+#: modules/codec/x264.c:146
+msgid "Force number of slices per frame"
+msgstr "强制每帧切片数"
+
+#: modules/codec/x264.c:147
+msgid "Force rectangular slices and is overridden by other slicing optinos"
+msgstr "强制矩形切片,可被其他切片设置覆盖"
+
+#: modules/codec/x264.c:149
+msgid "Limit the size of each slice in bytes"
+msgstr "限定各切片的尺寸为指定字节数"
+
+#: modules/codec/x264.c:150
+msgid "Sets a maximum slice size in bytes, Includes NAL overhead in size"
+msgstr "设定以字节为单位的最大切片尺寸,含 NAL 开销所占的尺寸"
+
+#: modules/codec/x264.c:152
+msgid "Limit the size of each slice in macroblocks"
+msgstr "限定宏块中各切片的尺寸"
+
+#: modules/codec/x264.c:153
+msgid "Sets a maximum number of macroblocks per slice"
+msgstr "设置每切片的最大宏块数"
+
+#: modules/codec/x264.c:156
+msgid "Set QP"
+msgstr "设置 QP"
+
+#: modules/codec/x264.c:157
+msgid ""
+"This selects the quantizer to use. Lower values result in better fidelity, "
+"but higher bitrates. 26 is a good default value. Range 0 (lossless) to 51."
+msgstr ""
+"这将选择要使用的量化器。较低的值会有较佳的精确性,但是有较高的位率。26 是一个"
+"比较好的值。范围从 0 (无损) 到 51。"
+
+#: modules/codec/x264.c:161
+msgid "Quality-based VBR"
+msgstr "基于质量的 VBR"
+
+#: modules/codec/x264.c:162
+msgid "1-pass Quality-based VBR. Range 0 to 51."
+msgstr "基于质量的 1 pass VBR。范围从 0 到 51。"
+
+#: modules/codec/x264.c:164
+msgid "Min QP"
+msgstr "最小 QP"
+
+#: modules/codec/x264.c:165
+msgid "Minimum quantizer parameter. 15 to 35 seems to be a useful range."
+msgstr "最小的量化器参数。15 到 35 看上去是一个有用的范围。"
+
+#: modules/codec/x264.c:168
+msgid "Max QP"
+msgstr "最大 QP"
+
+#: modules/codec/x264.c:169
+msgid "Maximum quantizer parameter."
+msgstr "最大量化器参数。"
+
+#: modules/codec/x264.c:171
+msgid "Max QP step"
+msgstr "最大 QP 步进"
+
+#: modules/codec/x264.c:172
+msgid "Max QP step between frames."
+msgstr "在帧之前的最大 QP 步进。"
+
+#: modules/codec/x264.c:174
+msgid "Average bitrate tolerance"
+msgstr "平均位率公差"
+
+#: modules/codec/x264.c:175
+msgid "Allowed variance in average bitrate (in kbits/s)."
+msgstr "平均位率内允许的误差 (以 kbits/s 为单位)。"
+
+#: modules/codec/x264.c:178
+msgid "Max local bitrate"
+msgstr "最大本地位率"
+
+#: modules/codec/x264.c:179
+msgid "Sets a maximum local bitrate (in kbits/s)."
+msgstr "设置最大本地位率 (以 kbits/s 为位率)。"
+
+#: modules/codec/x264.c:181
+msgid "VBV buffer"
+msgstr "VBV 缓冲"
+
+#: modules/codec/x264.c:182
+msgid "Averaging period for the maximum local bitrate (in kbits)."
+msgstr "最大本地位率的平均周期 (以 kbits 为单位)。"
+
+#: modules/codec/x264.c:185
+msgid "Initial VBV buffer occupancy"
+msgstr "初始 VBV 缓冲占有期"
+
+#: modules/codec/x264.c:186
+msgid ""
+"Sets the initial buffer occupancy as a fraction of the buffer size. Range "
+"0.0 to 1.0."
+msgstr "设置初始缓存占有期作为缓存的一部分。范围从 0.0 到 1.0。"
+
+#: modules/codec/x264.c:189
+msgid "How AQ distributes bits"
+msgstr "AQ 如何发布位"
+
+#: modules/codec/x264.c:190
+msgid ""
+"Defines bitdistribution mode for AQ, default 1\n"
+" - 0: Disabled\n"
+" - 1: Current x264 default mode\n"
+" - 2: uses log(var)^2 instead of log(var) and attempts to adapt strength per "
+"frame"
+msgstr ""
+"定义 AQ 位分发模式,默认 1\n"
+" - 0: 禁用\n"
+" - 1: 当前 x264 的默认模式\n"
+" - 2: 使用 log(数值)^2 替代 log(数值) 并尝试适应各帧强度"
+
+#: modules/codec/x264.c:195
+msgid "Strength of AQ"
+msgstr "AQ 强度"
+
+#: modules/codec/x264.c:196
+msgid ""
+"Strength to reduce blocking and blurring in flat\n"
+"and textured areas, default 1.0 recommented to be between 0..2\n"
+" - 0.5: weak AQ\n"
+" - 1.5: strong AQ"
+msgstr ""
+"减少块并模糊平面及纹理区域的强度,默认是 1.0\n"
+"推荐在 0 到 2 之间\n"
+" - 0.5: 弱 AQ\n"
+" - 1.5: 强 AQ"
+
+#: modules/codec/x264.c:202
+msgid "QP factor between I and P"
+msgstr "I 和 P 之间的 QP 因数"
+
+#: modules/codec/x264.c:203
+msgid "QP factor between I and P. Range 1.0 to 2.0."
+msgstr "在 I 和 P 之间的 QP 因数。范围从 1.0 到 2.0。"
+
+#: modules/codec/x264.c:206
+msgid "QP factor between P and B"
+msgstr "P 和 B 之间的 QP 因数"
+
+#: modules/codec/x264.c:207
+msgid "QP factor between P and B. Range 1.0 to 2.0."
+msgstr "在 P 和 B 之间的 QP 因数。范围从 1.0 到 2.0。"
+
+#: modules/codec/x264.c:209
+msgid "QP difference between chroma and luma"
+msgstr "在色度和亮度之间的差异"
+
+#: modules/codec/x264.c:210
+msgid "QP difference between chroma and luma."
+msgstr "在色度和亮度之间的差异。"
+
+#: modules/codec/x264.c:212
+msgid "Multipass ratecontrol"
+msgstr "多重编码码率控制"
+
+#: modules/codec/x264.c:213
+msgid ""
+"Multipass ratecontrol:\n"
+" - 1: First pass, creates stats file\n"
+" - 2: Last pass, does not overwrite stats file\n"
+" - 3: Nth pass, overwrites stats file\n"
+msgstr ""
+"多重编码码率控制:\n"
+" - 1: 一重, 创建状态文件\n"
+" - 2: 二重, 不覆盖状态文件\n"
+" - 3: 多重, 覆盖状态文件\n"
+
+#: modules/codec/x264.c:218
+msgid "QP curve compression"
+msgstr "QP 曲线压缩"
+
+#: modules/codec/x264.c:219
+msgid "QP curve compression. Range 0.0 (CBR) to 1.0 (QCP)."
+msgstr "QP 曲线压缩。范围从 0.0 (CBR) 到 1.0 (QCP)。"
+
+#: modules/codec/x264.c:221 modules/codec/x264.c:225
+msgid "Reduce fluctuations in QP"
+msgstr "减少 QP 波动"
+
+#: modules/codec/x264.c:222
+msgid ""
+"This reduces the fluctuations in QP before curve compression. Temporally "
+"blurs complexity."
+msgstr "这将减少在曲线压缩之前的 QP 波动。临时模糊的复杂性。"
+
+#: modules/codec/x264.c:226
+msgid ""
+"This reduces the fluctations in QP after curve compression. Temporally blurs "
+"quants."
+msgstr "这在曲线压缩之后减少 QP 的波动。临时模糊突增。"
+
+#: modules/codec/x264.c:231
+msgid "Partitions to consider"
+msgstr "分割计算器"
+
+#: modules/codec/x264.c:232
+msgid ""
+"Partitions to consider in analyse mode: \n"
+" - none : \n"
+" - fast : i4x4\n"
+" - normal: i4x4,p8x8,(i8x8)\n"
+" - slow : i4x4,p8x8,(i8x8),b8x8\n"
+" - all : i4x4,p8x8,(i8x8),b8x8,p4x4\n"
+"(p4x4 requires p8x8. i8x8 requires 8x8dct)."
+msgstr ""
+"在分析模式中的分割计算器: \n"
+" - 无 : \n"
+" - 快速 : i4x4\n"
+" - 普通 : i4x4,p8x8,(i8x8)\n"
+" - 慢 : i4x4,p8x8,(i8x8),b8x8\n"
+" - 全部 : i4x4,p8x8,(i8x8),b8x8,p4x4\n"
+"(p4x4 需要 p8x8。i8x8 需要 8x8dct)。"
+
+#: modules/codec/x264.c:240
+msgid "Direct MV prediction mode"
+msgstr "直接 MV 预计模式"
+
+#: modules/codec/x264.c:241
+msgid "Direct MV prediction mode."
+msgstr "直接 MV 预计模式。"
+
+#: modules/codec/x264.c:243
+msgid "Direct prediction size"
+msgstr "直接预计大小"
+
+#: modules/codec/x264.c:244
+msgid ""
+"Direct prediction size: - 0: 4x4\n"
+" - 1: 8x8\n"
+" - -1: smallest possible according to level\n"
+msgstr ""
+"直接预计大小: - 0: 4x4\n"
+" - 1: 8x8\n"
+" - -1: 按照等级的最小可能\n"
+
+#: modules/codec/x264.c:249
+msgid "Weighted prediction for B-frames"
+msgstr "用于 B 帧的有利预计"
+
+#: modules/codec/x264.c:250
+msgid "Weighted prediction for B-frames."
+msgstr "用于 B 帧的有利预计。"
+
+#: modules/codec/x264.c:252
+msgid "Weighted prediction for P-frames"
+msgstr "P 帧加权预测"
+
+#: modules/codec/x264.c:253
+msgid ""
+" Weighted prediction for P-frames: - 0: Disabled\n"
+" - 1: Blind offset\n"
+" - 2: Smart analysis\n"
+msgstr ""
+" P 帧加权预测: - 0: 禁用\n"
+" - 1: 隐性补偿\n"
+" - 2: 智能分析\n"
+
+#: modules/codec/x264.c:258
+msgid "Integer pixel motion estimation method"
+msgstr "整数像素运动估计模式"
+
+#: modules/codec/x264.c:259
+msgid ""
+"Selects the motion estimation algorithm: - dia: diamond search, radius 1 "
+"(fast)\n"
+" - hex: hexagonal search, radius 2\n"
+" - umh: uneven multi-hexagon search (better but slower)\n"
+" - esa: exhaustive search (extremely slow, primarily for testing)\n"
+" - tesa: hadamard exhaustive search (extremely slow, primarily for testing)\n"
+msgstr ""
+"选择运动估计算法: - dia: 方块搜索, 半径为 1 (快)\n"
+" - hex: 六边形搜索, 半径为 2\n"
+" - umh: 不一致的多六边形搜索 (较佳但速度慢)\n"
+" - esa: 穷举搜索 (非常慢, 主要用于测试)\n"
+" - tesa: hadamard 穷举搜索 (非常慢, 主要用于测试)\n"
+
+#: modules/codec/x264.c:266
+msgid "Maximum motion vector search range"
+msgstr "最大运动向量搜索范围"
+
+#: modules/codec/x264.c:267
+msgid ""
+"Maximum distance to search for motion estimation, measured from predicted "
+"position(s). Default of 16 is good for most footage, high motion sequences "
+"may benefit from settings between 24 and 32. Range 0 to 64."
+msgstr ""
+"运动估算搜索的最大距离,较慎重的预测点。默认的 16 适合大多数的距离,高连续动"
+"态场景可以设置为 24 和 32。范围是 0 到 64。"
+
+#: modules/codec/x264.c:272
+msgid "Maximum motion vector length"
+msgstr "最大运动向量长度"
+
+#: modules/codec/x264.c:273
+msgid ""
+"Maximum motion vector length in pixels. -1 is automatic, based on level."
+msgstr "以像素为单位的最大运动向量长度。-1 是自动,基于等级。"
+
+#: modules/codec/x264.c:276
+msgid "Minimum buffer space between threads"
+msgstr "线程之间的最小缓存空间"
+
+#: modules/codec/x264.c:277
+msgid ""
+"Minimum buffer space between threads. -1 is automatic, based on number of "
+"threads."
+msgstr "线程之间的最小缓冲空间。-1 是自动,基于线程数量。"
+
+#: modules/codec/x264.c:280
+msgid "Strength of psychovisual optimization, default is \"1.0:0.0\""
+msgstr "疯狂视觉优化的强度,默认为 \"1.0:0.0\""
+
+#: modules/codec/x264.c:281
+msgid ""
+"First parameter controls if RD is on (subme>=6) or offsecond parameter "
+"controls if Trellis is used on psychovisual optimization,default off"
+msgstr ""
+"第一个参数控制是否启用 RD (subme>=6) 第二个参数控制疯狂视觉优化是否使用 "
+"Trellis,默认关闭"
+
+#: modules/codec/x264.c:285
+msgid "Subpixel motion estimation and partition decision quality"
+msgstr "子像素运动估计和切割确定质量"
+
+#: modules/codec/x264.c:287
+msgid ""
+"This parameter controls quality versus speed tradeoffs involved in the "
+"motion estimation decision process (lower = quicker and higher = better "
+"quality). Range 1 to 9."
+msgstr ""
+"此参数控制了在运动估计处理过程中的质量与速度比 (较低 = 快速和高质量 = 较佳的"
+"质量)。范围是 1 到 9。"
+
+#: modules/codec/x264.c:291
+msgid "RD based mode decision for B-frames"
+msgstr "为 B 帧 RD 基于模式判断"
+
+#: modules/codec/x264.c:292
+msgid "RD based mode decision for B-frames. This requires subme 6 (or higher)."
+msgstr "为 B 帧 RD 基于模式判断。这需要 subme 6 (或更高)。"
+
+#: modules/codec/x264.c:295
+msgid "Decide references on a per partition basis"
+msgstr "在一个每分割基础上判断参考"
+
+#: modules/codec/x264.c:296
+msgid ""
+"Allows each 8x8 or 16x8 partition to independently select a reference frame, "
+"as opposed to only one ref per macroblock."
+msgstr ""
+"允许每 8x8 或 16x8 的分割独立的选择一个参考帧,相反的每个预宏块只有一个参考"
+"帧。"
+
+#: modules/codec/x264.c:300
+msgid "Chroma in motion estimation"
+msgstr "动态估算中的色度"
+
+#: modules/codec/x264.c:301
+msgid "Chroma ME for subpel and mode decision in P-frames."
+msgstr "在 P 帧中的用于 subpel 和模式确定的色度 ME。"
+
+#: modules/codec/x264.c:304
+msgid "Jointly optimize both MVs in B-frames"
+msgstr "在 B 帧中的 MVs 连带优化"
+
+#: modules/codec/x264.c:305
+msgid "Joint bidirectional motion refinement."
+msgstr "联合双向动态优化。"
+
+#: modules/codec/x264.c:307
+msgid "Adaptive spatial transform size"
+msgstr "适应空间改版大小"
+
+#: modules/codec/x264.c:309
+msgid "SATD-based decision for 8x8 transform in inter-MBs."
+msgstr "用于 inter-MB 中的 8x8 的传输中的基于 SATD 的判断。"
+
+#: modules/codec/x264.c:311
+msgid "Trellis RD quantization"
+msgstr "格式 RD 量化"
+
+#: modules/codec/x264.c:312
+msgid ""
+"Trellis RD quantization: \n"
+" - 0: disabled\n"
+" - 1: enabled only on the final encode of a MB\n"
+" - 2: enabled on all mode decisions\n"
+"This requires CABAC."
+msgstr ""
+"格式 RD 量化: \n"
+" - 0: 关闭\n"
+" - 1: 仅在编码最后一个 MB 时开启\n"
+" - 2: 在所有模式判断时开启\n"
+"这需要 CABAC。"
+
+#: modules/codec/x264.c:318
+msgid "Early SKIP detection on P-frames"
+msgstr "在 P 帧上的早期跳过检测"
+
+#: modules/codec/x264.c:319
+msgid "Early SKIP detection on P-frames."
+msgstr "在 P 帧上的早期跳过检测。"
+
+#: modules/codec/x264.c:321
+msgid "Coefficient thresholding on P-frames"
+msgstr "P 帧的阀系数"
+
+#: modules/codec/x264.c:322
+msgid ""
+"Coefficient thresholding on P-frames.Eliminate dct blocks containing only a "
+"small single coefficient."
+msgstr "P 帧上的阀系数。消除 dct 块仅包含一个小的单一系数。"
+
+#: modules/codec/x264.c:325
+msgid "Use Psy-optimizations"
+msgstr "使用疯狂视觉优化"
+
+#: modules/codec/x264.c:326
+msgid "Use all visual optimizations that can worsen both PSNR and SSIM"
+msgstr "使用所有可能同时恶化 PSNR 与 SSIM 的视觉优化"
+
+#: modules/codec/x264.c:330
+msgid ""
+"Dct-domain noise reduction. Adaptive pseudo-deadzone. 10 to 1000 seems to be "
+"a useful range."
+msgstr "Dct-域噪点消除。适应伪造的死区。10 到 1000 看上去是一个有用的范围。"
+
+#: modules/codec/x264.c:333
+msgid "Inter luma quantization deadzone"
+msgstr "Inter 亮度量化死区"
+
+#: modules/codec/x264.c:334
+msgid "Set the size of the inter luma quantization deadzone. Range 0 to 32."
+msgstr "设置 inter 量化死区的大小。范围是 0 到 32。"
+
+#: modules/codec/x264.c:337
+msgid "Intra luma quantization deadzone"
+msgstr "Intra 亮度量化死区"
+
+#: modules/codec/x264.c:338
+msgid "Set the size of the intra luma quantization deadzone. Range 0 to 32."
+msgstr "设置 intra 量化死区的大小。范围是 0 到 32。"
+
+#: modules/codec/x264.c:343
+msgid "Non-deterministic optimizations when threaded"
+msgstr "在线程中的非确定性优化"
+
+#: modules/codec/x264.c:344
+msgid "Slightly improve quality of SMP, at the cost of repeatability."
+msgstr "以可重复性为代价轻微改进 SMP 的质量。"
+
+#: modules/codec/x264.c:347
+msgid "CPU optimizations"
+msgstr "CPU 优化"
+
+#: modules/codec/x264.c:348
+msgid "Use assembler CPU optimizations."
+msgstr "使用汇编 CPU 优化。"
+
+#: modules/codec/x264.c:350
+msgid "Filename for 2 pass stats file"
+msgstr "2 重状态文件名"
+
+#: modules/codec/x264.c:351
+msgid "Filename for 2 pass stats file for multi-pass encoding."
+msgstr "用于多重编码的 2 重状态文件文件名。"
+
+#: modules/codec/x264.c:353
+msgid "PSNR computation"
+msgstr "PSNR 计算"
+
+#: modules/codec/x264.c:354
+msgid ""
+"Compute and print PSNR stats. This has no effect on the actual encoding "
+"quality."
+msgstr "计算并打印 PSNR 状态。这不会影响实际编码质量。"
+
+#: modules/codec/x264.c:357
+msgid "SSIM computation"
+msgstr "SSIM 计算"
+
+#: modules/codec/x264.c:358
+msgid ""
+"Compute and print SSIM stats. This has no effect on the actual encoding "
+"quality."
+msgstr "计算并打印 SSIM 状态。这不会影响实际编码质量。"
+
+#: modules/codec/x264.c:361
+msgid "Quiet mode"
+msgstr "静默模式"
+
+#: modules/codec/x264.c:362
+msgid "Quiet mode."
+msgstr "静默模式。"
+
+#: modules/codec/x264.c:364 modules/gui/macosx/playlistinfo.m:82
+msgid "Statistics"
+msgstr "统计"
+
+#: modules/codec/x264.c:365
+msgid "Print stats for each frame."
+msgstr "打印每帧的状态。"
+
+#: modules/codec/x264.c:367
+msgid "SPS and PPS id numbers"
+msgstr "SPS 和 PPS id 号"
+
+#: modules/codec/x264.c:368
+msgid ""
+"Set SPS and PPS id numbers to allow concatenating streams with different "
+"settings."
+msgstr "设置 SPS 和 PPS id 号以允许用不同的设置连接流。"
+
+#: modules/codec/x264.c:371
+msgid "Access unit delimiters"
+msgstr "访问单元分隔符"
+
+#: modules/codec/x264.c:372
+msgid "Generate access unit delimiter NAL units."
+msgstr "生成反问单元分隔符 NAL 单元。"
+
+#: modules/codec/x264.c:374
+msgid "Framecount to use on frametype lookahead"
+msgstr "统计帧数以供帧类预测"
+
+#: modules/codec/x264.c:375
+msgid ""
+"Framecount to use on frametype lookahead. Currently default is lower than "
+"x264 default because unmuxable outputdoesn't handle larger values that well "
+"yet"
+msgstr ""
+"统计帧数以供帧类预测。目前默认低于 x264 的默认设置,因为不可混流的输出仍然无"
+"法很好处理更大的值"
+
+#: modules/codec/x264.c:379 modules/codec/x264.c:380
+msgid "HRD-timing information"
+msgstr "HRD 计时信息"
+
+#: modules/codec/x264.c:382
+msgid ""
+"Tune the settings for a particular type of source or situation. Overridden "
+"by user settings."
+msgstr "根据特定类型源或情况调整设置。将被用户设置覆盖。"
+
+#: modules/codec/x264.c:384
+msgid "Use preset as default settings. Overridden by user settings."
+msgstr "使用预设作为默认设置。将被用户设置覆盖。"
+
+#: modules/codec/x264.c:389
+msgid "dia"
+msgstr "dia"
+
+#: modules/codec/x264.c:389
+msgid "hex"
+msgstr "hex"
+
+#: modules/codec/x264.c:389
+msgid "umh"
+msgstr "umh"
+
+#: modules/codec/x264.c:389
+msgid "esa"
+msgstr "esa"
+
+#: modules/codec/x264.c:389
+msgid "tesa"
+msgstr "tesa"
+
+#: modules/codec/x264.c:400
+msgid "fast"
+msgstr "快速"
+
+#: modules/codec/x264.c:400
+msgid "normal"
+msgstr "普通"
+
+#: modules/codec/x264.c:400
+msgid "slow"
+msgstr "慢"
+
+#: modules/codec/x264.c:400
+msgid "all"
+msgstr "全部"
+
+#: modules/codec/x264.c:405
+msgid "spatial"
+msgstr "三位"
+
+#: modules/codec/x264.c:405
+msgid "temporal"
+msgstr "临时"
+
+#: modules/codec/x264.c:405 modules/video_filter/mosaic.c:167
+msgid "auto"
+msgstr "自动"
+
+#: modules/codec/x264.c:408
+msgid "H.264/MPEG4 AVC encoder (x264)"
+msgstr "H.264/MPEG4 AVC 编码器 (x264)"
+
+#: modules/codec/zvbi.c:58
+msgid "Teletext page"
+msgstr "Teletext 页"
+
+#: modules/codec/zvbi.c:59
+msgid "Open the indicated Teletext page.Default page is index 100"
+msgstr "打开可能的 Teletext 页。默认的页是索引 100"
+
+#: modules/codec/zvbi.c:62
+msgid "Text is always opaque"
+msgstr "文本总是不透明"
+
+#: modules/codec/zvbi.c:63
+msgid "Setting vbi-opaque to false makes the boxed text transparent."
+msgstr "设置 vbi 不透明为否使得边框话的文本透明。"
+
+#: modules/codec/zvbi.c:66
+msgid "Teletext alignment"
+msgstr "Teletext 排列"
+
+#: modules/codec/zvbi.c:68
+msgid ""
+"You can enforce the teletext position on the video (0=center, 1=left, "
+"2=right, 4=top, 8=bottom, you can also use combinations of these values, eg. "
+"6 = top-right)."
+msgstr ""
+"您可以强制指定 teletext 在视频上的位置 (0=居中、1=左、2=右、4=上、8=下,您也"
+"可以混合使用这些值,例如 6 = 右上)。"
+
+#: modules/codec/zvbi.c:72
+msgid "Teletext text subtitles"
+msgstr "Teletext 文本字幕"
+
+#: modules/codec/zvbi.c:73
+msgid "Output teletext subtitles as text instead of as RGBA"
+msgstr "将 teletext 字幕作为文本输出代替 RGBA"
+
+#: modules/codec/zvbi.c:82
+msgid "VBI and Teletext decoder"
+msgstr "VBI 和 Teletext 解码器"
+
+#: modules/codec/zvbi.c:83
+msgid "VBI & Teletext"
+msgstr "VBI 和 Teletext"
+
+#: modules/codec/zvbi.c:694
+msgid "Subpage"
+msgstr "子页"
+
+#: modules/codec/zvbi.c:708
+msgid "Page"
+msgstr "页"
+
+#: modules/control/dbus.c:134
+msgid "dbus"
+msgstr "dbus"
+
+#: modules/control/dbus.c:137
+msgid "D-Bus control interface"
+msgstr "D-Bus 控制界面"
+
+#: modules/control/gestures.c:81
+msgid "Motion threshold (10-100)"
+msgstr "运动限制 (10-100)"
+
+#: modules/control/gestures.c:83
+msgid "Amount of movement required for a mouse gesture to be recorded."
+msgstr "用于记录鼠标手势所需的移动数量。"
+
+#: modules/control/gestures.c:85
+msgid "Trigger button"
+msgstr "触发按钮"
+
+#: modules/control/gestures.c:87
+msgid "Trigger button for mouse gestures."
+msgstr "用于鼠标手势的触发按钮。"
+
+#: modules/control/gestures.c:97
+msgid "Middle"
+msgstr "中"
+
+#: modules/control/gestures.c:100
+msgid "Gestures"
+msgstr "手势"
+
+#: modules/control/gestures.c:108
+msgid "Mouse gestures control interface"
+msgstr "鼠标手势控制界面"
+
+#: modules/control/globalhotkeys/win32.c:46
+#: modules/control/globalhotkeys/xcb.c:49
+msgid "Global Hotkeys"
+msgstr "全局热键"
+
+#: modules/control/globalhotkeys/win32.c:49
+#: modules/control/globalhotkeys/xcb.c:52
+msgid "Global Hotkeys interface"
+msgstr "全局热键界面"
+
+#: modules/control/hotkeys.c:97
+msgid "Volume Control"
+msgstr "音频控制"
+
+#: modules/control/hotkeys.c:97
+msgid "Position Control"
+msgstr "位置控制"
+
+#: modules/control/hotkeys.c:97 modules/gui/macosx/intf.m:2449
+msgid "Ignore"
+msgstr "忽略"
+
+#: modules/control/hotkeys.c:100 modules/gui/macosx/simple_prefs.m:200
+#: modules/gui/qt4/components/simple_preferences.cpp:91
+msgid "Hotkeys"
+msgstr "热键"
+
+#: modules/control/hotkeys.c:101
+msgid "Hotkeys management interface"
+msgstr "热键管理界面"
+
+#: modules/control/hotkeys.c:108
+msgid "MouseWheel x-axis Control"
+msgstr "鼠标轮 X 轴控制"
+
+#: modules/control/hotkeys.c:109
+msgid ""
+"MouseWheel x-axis can control volume, position or mousewheel event can be "
+"ignored"
+msgstr "鼠标滚轮的 x 轴可控制音量或位置,也可以忽略滚轮事件"
+
+#: modules/control/hotkeys.c:374
+#, c-format
+msgid "Audio Device: %s"
+msgstr "音频设备: %s"
+
+#: modules/control/hotkeys.c:470
+#, c-format
+msgid "Audio track: %s"
+msgstr "音轨: %s"
+
+#: modules/control/hotkeys.c:487 modules/control/hotkeys.c:511
+#, c-format
+msgid "Subtitle track: %s"
+msgstr "字幕轨道: %s"
+
+#: modules/control/hotkeys.c:487
+msgid "N/A"
+msgstr "不可用"
+
+#: modules/control/hotkeys.c:536
+#, c-format
+msgid "Aspect ratio: %s"
+msgstr "高宽比: %s"
+
+#: modules/control/hotkeys.c:564
+#, c-format
+msgid "Crop: %s"
+msgstr "裁剪: %s"
+
+#: modules/control/hotkeys.c:578
+msgid "Zooming reset"
+msgstr "放大复位"
+
+#: modules/control/hotkeys.c:586
+msgid "Scaled to screen"
+msgstr "缩放至屏幕"
+
+#: modules/control/hotkeys.c:589
+msgid "Original Size"
+msgstr "原始大小"
+
+#: modules/control/hotkeys.c:617
+msgid "Deinterlace off"
+msgstr "反交错关闭"
+
+#: modules/control/hotkeys.c:637
+msgid "Deinterlace on"
+msgstr "反交错开启"
+
+#: modules/control/hotkeys.c:670
+#, c-format
+msgid "Zoom mode: %s"
+msgstr "缩放模式: %s"
+
+#: modules/control/hotkeys.c:718
+msgid "1.00x"
+msgstr "1.00x"
+
+#: modules/control/hotkeys.c:773 modules/control/hotkeys.c:783
+#, c-format
+msgid "Subtitle delay %i ms"
+msgstr "字幕延迟 %i 毫秒"
+
+#: modules/control/hotkeys.c:793 modules/control/hotkeys.c:803
+#, c-format
+msgid "Subtitle position %i px"
+msgstr "字幕位置 %i px"
+
+#: modules/control/hotkeys.c:813 modules/control/hotkeys.c:823
+#, c-format
+msgid "Audio delay %i ms"
+msgstr "音频延迟 %i 毫秒"
+
+#: modules/control/hotkeys.c:861
+msgid "Recording"
+msgstr "正在录制"
+
+#: modules/control/hotkeys.c:863
+msgid "Recording done"
+msgstr "录制完成"
+
+#: modules/control/hotkeys.c:1043
+#, c-format
+msgid "Volume %d%%"
+msgstr "音量 %d%%"
+
+#: modules/control/hotkeys.c:1050
+#, c-format
+msgid "Speed: %.2fx"
+msgstr "速度: %.2fx"
+
+#: modules/control/http/http.c:41
+msgid "Host address"
+msgstr "主机地址"
+
+#: modules/control/http/http.c:43
+msgid ""
+"Address and port the HTTP interface will listen on. It defaults to all "
+"network interfaces (0.0.0.0). If you want the HTTP interface to be available "
+"only on the local machine, enter 127.0.0.1"
+msgstr ""
+"HTTP 界面将要监听的地址和端口。它默认用于所有网络界面 (0.0.0.0)。如果您只想"
+"让 HTTP 界面仅对本机可用,请输入 127.0.0.1"
+
+#: modules/control/http/http.c:47 modules/control/http/http.c:48
+msgid "Source directory"
+msgstr "源目录"
+
+#: modules/control/http/http.c:49
+msgid "Handlers"
+msgstr "处理器"
+
+#: modules/control/http/http.c:51
+msgid ""
+"List of handler extensions and executable paths (for instance: php=/usr/bin/"
+"php,pl=/usr/bin/perl)."
+msgstr "处理扩展和可执行文件的路径 (例如: php=/usr/bin/php,pl=/usr/bin/perl)。"
+
+#: modules/control/http/http.c:53
+msgid "Export album art as /art"
+msgstr "导出专辑封面为 /art"
+
+#: modules/control/http/http.c:55
+msgid ""
+"Allow exporting album art for current playlist items at the /art and /art?"
+"id=<id> URLs."
+msgstr "允许将当前播放列表项目中的专辑封面导出到 /art 和 /art?id=<id> URL。"
+
+#: modules/control/http/http.c:58
+msgid "HTTP interface x509 PEM certificate file (enables SSL)."
+msgstr "HTTP 界面 x509 PEM 证书文件 (开启 SSL)。"
+
+#: modules/control/http/http.c:61
+msgid "HTTP interface x509 PEM private key file."
+msgstr "HTTP 界面 x509 PEM 私匙文件。"
+
+#: modules/control/http/http.c:63
+msgid "HTTP interface x509 PEM trusted root CA certificates file."
+msgstr "HTTP 界面 x509 PEM 受信任的根 CA 证书文件。"
+
+#: modules/control/http/http.c:66
+msgid "HTTP interace Certificates Revocation List file."
+msgstr "HTTP 界面证书废止列表文件。"
+
+#: modules/control/http/http.c:69
+msgid "HTTP"
+msgstr "HTTP"
+
+#: modules/control/http/http.c:70
+msgid "HTTP remote control interface"
+msgstr "HTTP 远程控制界面"
+
+#: modules/control/http/http.c:80
+msgid "HTTP SSL"
+msgstr "HTTP SSL"
+
+#: modules/control/lirc.c:46
+msgid "Change the lirc configuration file"
+msgstr "更改 lirc 配置文件"
+
+#: modules/control/lirc.c:48
+msgid ""
+"Tell lirc to read this configuration file. By default it searches in the "
+"users home directory."
+msgstr "告诉 lirc 读取此配置文件。按默认它将在用户的 home 目录中搜索。"
+
+#: modules/control/lirc.c:58
+msgid "Infrared"
+msgstr "红外线"
+
+#: modules/control/lirc.c:61
+msgid "Infrared remote control interface"
+msgstr "红外线远程控制界面"
+
+#: modules/control/motion.c:72
+msgid "Use the rotate video filter instead of transform"
+msgstr "使用旋转视频滤镜代替变换"
+
+#: modules/control/motion.c:78
+msgid "motion"
+msgstr "运动"
+
+#: modules/control/motion.c:81
+msgid "motion control interface"
+msgstr "使用运动控制界面"
+
+#: modules/control/motion.c:82
+msgid ""
+"Use HDAPS, AMS, APPLESMC or UNIMOTION motion sensors to rotate the video"
+msgstr "使用 HDAPS, AMS, APPLESMC 或 UNIMOTION 运动传感器旋转视频"
+
+#: modules/control/netsync.c:57
+msgid "Network master clock"
+msgstr "网络主时钟"
+
+#: modules/control/netsync.c:58
+msgid ""
+"When set then this vlc instance shall dictate its clock for "
+"synchronisationover clients listening on the masters network ip address"
+msgstr "设定后此 vlc 实例将根据在主网络 ip 地址上侦听的客户端调整同步"
+
+#: modules/control/netsync.c:62
+msgid "Master server ip address"
+msgstr "主服务器 ip 地址"
+
+#: modules/control/netsync.c:63
+msgid ""
+"The IP address of the network master clock to use for clock synchronisation."
+msgstr "用于时钟同步的网络主时钟的 IP 地址。"
+
+#: modules/control/netsync.c:66
+msgid "UDP timeout (in ms)"
+msgstr "UDP 超时 (毫秒)"
+
+#: modules/control/netsync.c:67
+msgid ""
+"Amount of time (in ms) to wait before aborting network reception of data."
+msgstr "在放弃网络数据接收前等待的时间量(单位为毫秒)。"
+
+#: modules/control/netsync.c:71
+msgid "Network Sync"
+msgstr "网络同步"
+
+#: modules/control/ntservice.c:43
+msgid "Install Windows Service"
+msgstr "安装 Windows 服务"
+
+#: modules/control/ntservice.c:45
+msgid "Install the Service and exit."
+msgstr "安装服务并退出。"
+
+#: modules/control/ntservice.c:46
+msgid "Uninstall Windows Service"
+msgstr "卸载 Windows 服务"
+
+#: modules/control/ntservice.c:48
+msgid "Uninstall the Service and exit."
+msgstr "卸载 服务并退出。"
+
+#: modules/control/ntservice.c:49
+msgid "Display name of the Service"
+msgstr "显示服务名称"
+
+#: modules/control/ntservice.c:51
+msgid "Change the display name of the Service."
+msgstr "更改服务的显示名称。"
+
+#: modules/control/ntservice.c:52
+msgid "Configuration options"
+msgstr "设置选项"
+
+#: modules/control/ntservice.c:54
+msgid ""
+"Configuration options that will be used by the Service (eg. --foo=bar --no-"
+"foobar). It should be specified at install time so the Service is properly "
+"configured."
+msgstr ""
+"设置将被服务使用的设置选项 (例如 --foo=bar -- no- foobar)。它应该在安装时指"
+"定,这样服务才能被正确配置。"
+
+#: modules/control/ntservice.c:59
+msgid ""
+"Additional interfaces spawned by the Service. It should be specified at "
+"install time so the Service is properly configured. Use a comma separated "
+"list of interface modules. (common values are: logger, sap, rc, http)"
+msgstr ""
+"服务附属的附加界面。它应该在安装时指定,这样服务才能被正确配置。使用一个逗号"
+"分隔的界面列表。(公共值是: logger, sap, rc, http)"
+
+#: modules/control/ntservice.c:65
+msgid "NT Service"
+msgstr "NT 服务"
+
+#: modules/control/ntservice.c:66
+msgid "Windows Service interface"
+msgstr "Windows 服务界面"
+
+#: modules/control/rc.c:70
+msgid "Initializing"
+msgstr "正在初始化"
+
+#: modules/control/rc.c:71
+msgid "Opening"
+msgstr "正在打开"
+
+#: modules/control/rc.c:73 modules/gui/macosx/embeddedwindow.m:167
+#: modules/gui/macosx/intf.m:2002 modules/gui/macosx/intf.m:2003
+#: modules/gui/macosx/intf.m:2004 modules/gui/macosx/intf.m:2005
+#: modules/gui/qt4/menus.cpp:796 modules/misc/notify/xosd.c:235
+msgid "Pause"
+msgstr "暂停"
+
+#: modules/control/rc.c:74
+msgid "End"
+msgstr "结束"
+
+#: modules/control/rc.c:75
+msgid "Error"
+msgstr "错误"
+
+#: modules/control/rc.c:160
+msgid "Show stream position"
+msgstr "显示流位置"
+
+#: modules/control/rc.c:161
+msgid ""
+"Show the current position in seconds within the stream from time to time."
+msgstr "显示在流中的当前位置。"
+
+#: modules/control/rc.c:164
+msgid "Fake TTY"
+msgstr "伪装 TTY"
+
+#: modules/control/rc.c:165
+msgid "Force the rc module to use stdin as if it was a TTY."
+msgstr "强制 rc 模块使用 stdin,就好比它是个 TTY。"
+
+#: modules/control/rc.c:167
+msgid "UNIX socket command input"
+msgstr "UNIX 端口命令输入"
+
+#: modules/control/rc.c:168
+msgid "Accept commands over a Unix socket rather than stdin."
+msgstr "尝试通过 Unix 端口输入命令。"
+
+#: modules/control/rc.c:171
+msgid "TCP command input"
+msgstr "TCP 命令输入"
+
+#: modules/control/rc.c:172
+msgid ""
+"Accept commands over a socket rather than stdin. You can set the address and "
+"port the interface will bind to."
+msgstr "尝试通过一个端口输入命令。您可以设置地址和界面将被绑定的端口。"
+
+#: modules/control/rc.c:176 modules/misc/dummy/dummy.c:54
+msgid "Do not open a DOS command box interface"
+msgstr "不打开 DOS 命令行界面"
+
+#: modules/control/rc.c:178
+msgid ""
+"By default the rc interface plugin will start a DOS command box. Enabling "
+"the quiet mode will not bring this command box but can also be pretty "
+"annoying when you want to stop VLC and no video window is open."
+msgstr ""
+"在默认情况下 rc 接口插件将会启动一个 DOS 命令行窗口。开启静默模式将不会出现此"
+"命令窗口但是也可能在您希望在没有打开视频窗口时停止 VLC 的时候导致麻烦。"
+
+#: modules/control/rc.c:185
+msgid "RC"
+msgstr "RC"
+
+#: modules/control/rc.c:188
+msgid "Remote control interface"
+msgstr "远程控制界面"
+
+#: modules/control/rc.c:338
+msgid "Remote control interface initialized. Type `help' for help."
+msgstr "已初始化的远程控制界面。输入 `help' 获取帮助。 "
+
+#: modules/control/rc.c:775
+#, c-format
+msgid "Unknown command `%s'. Type `help' for help."
+msgstr "未知的命令 `%s'。输入 `help' 获取帮助。 "
+
+#: modules/control/rc.c:798
+msgid "+----[ Remote control commands ]"
+msgstr "+----[ 远程控制命令 ]"
+
+#: modules/control/rc.c:800
+msgid "| add XYZ . . . . . . . . . . . . add XYZ to playlist"
+msgstr "| add XYZ . . . . . . . . . . . . 添加 XYZ 到播放列表"
+
+#: modules/control/rc.c:801
+msgid "| enqueue XYZ . . . . . . . . . queue XYZ to playlist"
+msgstr "| enqueue XYZ . . . . . . . . . 加入 XYZ 到队列"
+
+#: modules/control/rc.c:802
+msgid "| playlist . . . . . show items currently in playlist"
+msgstr "| playlist . . . . . 显示当前播放列表中的项目"
+
+#: modules/control/rc.c:803
+msgid "| play . . . . . . . . . . . . . . . . . . play stream"
+msgstr "| play . . . . . . . . . . . . . . . . . . 播放流"
+
+#: modules/control/rc.c:804
+msgid "| stop . . . . . . . . . . . . . . . . . . stop stream"
+msgstr "| stop . . . . . . . . . . . . . . . . . . 停止流"
+
+#: modules/control/rc.c:805
+msgid "| next . . . . . . . . . . . . . . next playlist item"
+msgstr "| next . . . . . . . . . . . . . . 下一个播放列表项目"
+
+#: modules/control/rc.c:806
+msgid "| prev . . . . . . . . . . . . previous playlist item"
+msgstr "| prev . . . . . . . . . . . . 上一个播放列表项目"
+
+#: modules/control/rc.c:807
+msgid "| goto . . . . . . . . . . . . . . goto item at index"
+msgstr "| goto . . . . . . . . . . . . . . 转到索引中的项目"
+
+#: modules/control/rc.c:808
+msgid "| repeat [on|off] . . . . toggle playlist item repeat"
+msgstr "| repeat [on|off] . . . . 切换播放列表项目重复"
+
+#: modules/control/rc.c:809
+msgid "| loop [on|off] . . . . . . . . . toggle playlist loop"
+msgstr "| loop [on|off] . . . . . . . . . 切换播放列表循环"
+
+#: modules/control/rc.c:810
+msgid "| random [on|off] . . . . . . . toggle random jumping"
+msgstr "| random [on|off] . . . . . . . 切换随机跳转"
+
+#: modules/control/rc.c:811
+msgid "| clear . . . . . . . . . . . . . . clear the playlist"
+msgstr "| clear . . . . . . . . . . . . . . 清除播放列表"
+
+#: modules/control/rc.c:812
+msgid "| status . . . . . . . . . . . current playlist status"
+msgstr "| status . . . . . . . . . . . 当前的播放列表状态"
+
+#: modules/control/rc.c:813
+msgid "| title [X] . . . . . . set/get title in current item"
+msgstr "| title [X] . . . . . . 设置/获取当前的项目"
+
+#: modules/control/rc.c:814
+msgid "| title_n . . . . . . . . next title in current item"
+msgstr "| title_n . . . . . . . . 当前项目的下一个标题"
+
+#: modules/control/rc.c:815
+msgid "| title_p . . . . . . previous title in current item"
+msgstr "| title_p . . . . . . 当前项目的上一个标题"
+
+#: modules/control/rc.c:816
+msgid "| chapter [X] . . . . set/get chapter in current item"
+msgstr "| chapter [X] . . . . 设置获取当前项目的章节"
+
+#: modules/control/rc.c:817
+msgid "| chapter_n . . . . . . next chapter in current item"
+msgstr "| chapter_n . . . . . . 当前项目的下一个章节"
+
+#: modules/control/rc.c:818
+msgid "| chapter_p . . . . previous chapter in current item"
+msgstr "| chapter_p . . . . 当前项目的上一个章节"
+
+#: modules/control/rc.c:820
+msgid "| seek X . . . seek in seconds, for instance `seek 12'"
+msgstr "| seek X . . . 以秒搜索, 例如 `seek 12'"
+
+#: modules/control/rc.c:821
+msgid "| pause . . . . . . . . . . . . . . . . toggle pause"
+msgstr "| pause . . . . . . . . . . . . . . . . 切换暂停"
+
+#: modules/control/rc.c:822
+msgid "| fastforward . . . . . . . . . set to maximum rate"
+msgstr "| fastforward . . . . . . . . . 设置最大率"
+
+#: modules/control/rc.c:823
+msgid "| rewind . . . . . . . . . . . . set to minimum rate"
+msgstr "| rewind . . . . . . . . . . . . 设置最小率"
+
+#: modules/control/rc.c:824
+msgid "| faster . . . . . . . . . . faster playing of stream"
+msgstr "| faster . . . . . . . . . . 快速播放流"
+
+#: modules/control/rc.c:825
+msgid "| slower . . . . . . . . . . slower playing of stream"
+msgstr "| slower . . . . . . . . . . 慢速播放流"
+
+#: modules/control/rc.c:826
+msgid "| normal . . . . . . . . . . normal playing of stream"
+msgstr "| normal . . . . . . . . . . 普通播放流"
+
+#: modules/control/rc.c:827
+msgid "| frame. . . . . . . . . . play frame by frame"
+msgstr "| 帧 . . . . . . . . . . 逐帧播放"
+
+#: modules/control/rc.c:828
+msgid "| f [on|off] . . . . . . . . . . . . toggle fullscreen"
+msgstr "| f [on|off] . . . . . . . . . . . . 切换全屏幕"
+
+#: modules/control/rc.c:829
+msgid "| info . . . . . information about the current stream"
+msgstr "| info . . . . . 当前流的信息"
+
+#: modules/control/rc.c:830
+msgid "| stats . . . . . . . . show statistical information"
+msgstr "| stats . . . . . . . . 显示统计信息"
+
+#: modules/control/rc.c:831
+msgid "| get_time . . seconds elapsed since stream's beginning"
+msgstr "| get_time . . 从流开始时经过的秒数"
+
+#: modules/control/rc.c:832
+msgid "| is_playing . . . . 1 if a stream plays, 0 otherwise"
+msgstr "| is_playing . . . . 如果流在播放为 1, 否则为 0"
+
+#: modules/control/rc.c:833
+msgid "| get_title . . . . . the title of the current stream"
+msgstr "| get_title . . . . . 当前流的标题"
+
+#: modules/control/rc.c:834
+msgid "| get_length . . . . the length of the current stream"
+msgstr "| get_length . . . . 当前流的长度"
+
+#: modules/control/rc.c:836
+msgid "| volume [X] . . . . . . . . . . set/get audio volume"
+msgstr "| volume [X] . . . . . . . . . . 设置/获取音频音量"
+
+#: modules/control/rc.c:837
+msgid "| volup [X] . . . . . . . raise audio volume X steps"
+msgstr "| volup [X] . . . . . . . 提升音频音量 X 级"
+
+#: modules/control/rc.c:838
+msgid "| voldown [X] . . . . . . lower audio volume X steps"
+msgstr "| voldown [X] . . . . . . 降低音频音量 X 级"
+
+#: modules/control/rc.c:839
+msgid "| adev [X] . . . . . . . . . . . set/get audio device"
+msgstr "| adev [X] . . . . . . . . . . . 设置/获取音频设备"
+
+#: modules/control/rc.c:840
+msgid "| achan [X]. . . . . . . . . . set/get audio channels"
+msgstr "| achan [X]. . . . . . . . . . 设置/获取声道"
+
+#: modules/control/rc.c:841
+msgid "| atrack [X] . . . . . . . . . . . set/get audio track"
+msgstr "| atrack [X] . . . . . . . . . . . 设置/获取音轨"
+
+#: modules/control/rc.c:842
+msgid "| vtrack [X] . . . . . . . . . . . set/get video track"
+msgstr "| vtrack [X] . . . . . . . . . . . 设置/获取视频轨道"
+
+#: modules/control/rc.c:843
+msgid "| vratio [X] . . . . . . . set/get video aspect ratio"
+msgstr "| vratio [X] . . . . . . . 设置/获取视频高宽比"
+
+#: modules/control/rc.c:844
+msgid "| vcrop [X] . . . . . . . . . . . set/get video crop"
+msgstr "| vcrop [X] . . . . . . . . . . . 设置/获取视频剪辑"
+
+#: modules/control/rc.c:845
+msgid "| vzoom [X] . . . . . . . . . . . set/get video zoom"
+msgstr "| vzoom [X] . . . . . . . . . . . 设置/获取视频缩放"
+
+#: modules/control/rc.c:846
+msgid "| snapshot . . . . . . . . . . . . take video snapshot"
+msgstr "| snapshot . . . . . . . . . . . . 获取视频截图"
+
+#: modules/control/rc.c:847
+msgid "| strack [X] . . . . . . . . . set/get subtitles track"
+msgstr "| strack [X] . . . . . . . . . 设置/获取字幕轨道"
+
+#: modules/control/rc.c:848
+msgid "| key [hotkey name] . . . . . . simulate hotkey press"
+msgstr "| key [热键名] . . . . . . 模拟按下热键"
+
+#: modules/control/rc.c:849
+msgid "| menu . . [on|off|up|down|left|right|select] use menu"
+msgstr "| menu . . [on|off|up|down|left|right|select] 使用菜单"
+
+#: modules/control/rc.c:854
+msgid "| @name marq-marquee STRING . . overlay STRING in video"
+msgstr "| @name marq-marquee STRING . . 覆盖视频中的字串"
+
+#: modules/control/rc.c:855
+msgid "| @name marq-x X . . . . . . . . . . . .offset from left"
+msgstr "| @name marq-x X . . . . . . . . . . . .左偏移"
+
+#: modules/control/rc.c:856
+msgid "| @name marq-y Y . . . . . . . . . . . . offset from top"
+msgstr "| @name marq-y Y . . . . . . . . . . . . 上偏移"
+
+#: modules/control/rc.c:857
+msgid "| @name marq-position #. . . .relative position control"
+msgstr "| @name marq-position #. . . .相对位置控制"
+
+#: modules/control/rc.c:858
+msgid "| @name marq-color # . . . . . . . . . . font color, RGB"
+msgstr "| @name marq-color # . . . . . . . . . . 字体颜色, RGB"
+
+#: modules/control/rc.c:859
+msgid "| @name marq-opacity # . . . . . . . . . . . . . opacity"
+msgstr "| @name marq-opacity # . . . . . . . . . . . . . 不透明度"
+
+#: modules/control/rc.c:860
+msgid "| @name marq-timeout T. . . . . . . . . . timeout, in ms"
+msgstr "| @name marq-timeout T. . . . . . . . . . 超时, 毫秒为单位"
+
+#: modules/control/rc.c:861
+msgid "| @name marq-size # . . . . . . . . font size, in pixels"
+msgstr "| @name marq-size # . . . . . . . . 字体大小, 像素为单位"
+
+#: modules/control/rc.c:863
+msgid "| @name logo-file STRING . . .the overlay file path/name"
+msgstr "| @name logo-file STRING . . .覆盖文件路径/名称"
+
+#: modules/control/rc.c:864
+msgid "| @name logo-x X . . . . . . . . . . . .offset from left"
+msgstr "| @name logo-x X . . . . . . . . . . . .左侧偏移"
+
+#: modules/control/rc.c:865
+msgid "| @name logo-y Y . . . . . . . . . . . . offset from top"
+msgstr "| @name logo-y Y . . . . . . . . . . . . 上侧偏移"
+
+#: modules/control/rc.c:866
+msgid "| @name logo-position #. . . . . . . . relative position"
+msgstr "| @name logo-position #. . . . . . . . 相对位置"
+
+#: modules/control/rc.c:867
+msgid "| @name logo-transparency #. . . . . . . . .transparency"
+msgstr "| @name logo-transparency #. . . . . . . . .透明度"
+
+#: modules/control/rc.c:869
+msgid "| @name mosaic-alpha # . . . . . . . . . . . . . . alpha"
+msgstr "| @name mosaic-alpha # . . . . . . . . . . . . . . 透明度"
+
+#: modules/control/rc.c:870
+msgid "| @name mosaic-height #. . . . . . . . . . . . . .height"
+msgstr "| @name mosaic-height #. . . . . . . . . . . . . .高度"
+
+#: modules/control/rc.c:871
+msgid "| @name mosaic-width # . . . . . . . . . . . . . . width"
+msgstr "| @name mosaic-width # . . . . . . . . . . . . . . 宽度"
+
+#: modules/control/rc.c:872
+msgid "| @name mosaic-xoffset # . . . .top left corner position"
+msgstr "| @name mosaic-xoffset # . . . .左上角位置"
+
+#: modules/control/rc.c:873
+msgid "| @name mosaic-yoffset # . . . .top left corner position"
+msgstr "| @name mosaic-yoffset # . . . .左上角位置"
+
+#: modules/control/rc.c:874
+msgid "| @name mosaic-offsets x,y(,x,y)*. . . . list of offsets"
+msgstr "| @name mosaic-offsets x,y(,x,y)*. . . . 偏移列表"
+
+#: modules/control/rc.c:875
+msgid "| @name mosaic-align 0..2,4..6,8..10. . .mosaic alignment"
+msgstr "| @name mosaic-align 0..2,4..6,8..10. . .镶嵌排序"
+
+#: modules/control/rc.c:876
+msgid "| @name mosaic-vborder # . . . . . . . . vertical border"
+msgstr "| @name mosaic-vborder # . . . . . . . . 垂直边框"
+
+#: modules/control/rc.c:877
+msgid "| @name mosaic-hborder # . . . . . . . horizontal border"
+msgstr "| @name mosaic-hborder # . . . . . . . 水平边框"
+
+#: modules/control/rc.c:878
+msgid "| @name mosaic-position {0=auto,1=fixed} . . . .position"
+msgstr "| @name mosaic-position {0=自动,1=固定} . . . .位置"
+
+#: modules/control/rc.c:879
+msgid "| @name mosaic-rows #. . . . . . . . . . .number of rows"
+msgstr "| @name mosaic-rows #. . . . . . . . . . .行数"
+
+#: modules/control/rc.c:880
+msgid "| @name mosaic-cols #. . . . . . . . . . .number of cols"
+msgstr "| @name mosaic-cols #. . . . . . . . . . .列数"
+
+#: modules/control/rc.c:881
+msgid "| @name mosaic-order id(,id)* . . . . order of pictures "
+msgstr "| @name mosaic-order id(,id)* . . . . 图片顺序"
+
+#: modules/control/rc.c:882
+msgid "| @name mosaic-keep-aspect-ratio {0,1} . . .aspect ratio"
+msgstr "| @name mosaic-keep-aspect-ratio {0,1} . . .高宽比"
+
+#: modules/control/rc.c:885
+msgid "| help . . . . . . . . . . . . . . . this help message"
+msgstr "| help . . . . . . . . . . . . . . . 此帮助信息"
+
+#: modules/control/rc.c:886
+msgid "| longhelp . . . . . . . . . . . a longer help message"
+msgstr "| longhelp . . . . . . . . . . . 一个长帮助信息"
+
+#: modules/control/rc.c:887
+msgid "| logout . . . . . . . exit (if in socket connection)"
+msgstr "| logout . . . . . . . 退出 (如果在端口连接)"
+
+#: modules/control/rc.c:888
+msgid "| quit . . . . . . . . . . . . . . . . . . . quit vlc"
+msgstr "| quit . . . . . . . . . . . . . . . . . . . 退出 vlc"
+
+#: modules/control/rc.c:890
+msgid "+----[ end of help ]"
+msgstr "+----[ 帮助结束 ]"
+
+#: modules/control/rc.c:1016
+msgid "Press menu select or pause to continue."
+msgstr "请按菜单选择或暂停继续。"
+
+#: modules/control/rc.c:1241 modules/control/rc.c:1482
+#: modules/control/rc.c:1540 modules/control/rc.c:1713
+#: modules/control/rc.c:1811
+msgid "Type 'menu select' or 'pause' to continue."
+msgstr "输入 '菜单选择' 或 '暂停' 继续。"
+
+#: modules/control/rc.c:1333
+msgid "Error: `goto' needs an argument greater than zero."
+msgstr "错误: `goto' 需要一个变量大于零。"
+
+#: modules/control/rc.c:1344
+#, c-format
+msgid "Playlist has only %d elements"
+msgstr "播放列表仅有 %d 个元素"
+
+#: modules/control/rc.c:1796 modules/control/rc.c:1836
+msgid "Please provide one of the following parameters:"
+msgstr "请提供下拉参数:"
+
+#: modules/control/rc.c:1870 modules/gui/ncurses.c:1972
+msgid "+-[Incoming]"
+msgstr "+-[入站]"
+
+#: modules/control/rc.c:1871 modules/gui/ncurses.c:1975
+#, c-format
+msgid "| input bytes read : %8.0f KiB"
+msgstr "| 读入字节数 : %8.0f KiB"
+
+#: modules/control/rc.c:1873 modules/gui/ncurses.c:1978
+#, c-format
+msgid "| input bitrate : %6.0f kb/s"
+msgstr "| 输入位率 : %6.0f kb/s"
+
+#: modules/control/rc.c:1875 modules/gui/ncurses.c:1980
+#, c-format
+msgid "| demux bytes read : %8.0f KiB"
+msgstr "| 去复用字节读取 : %8.0f KiB"
+
+#: modules/control/rc.c:1877 modules/gui/ncurses.c:1983
+#, c-format
+msgid "| demux bitrate : %6.0f kb/s"
+msgstr "| 去复用位率 : %6.0f kb/s"
+
+#: modules/control/rc.c:1879
+#, c-format
+msgid "| demux corrupted : %5i"
+msgstr "| 去复用失败 : %5i"
+
+#: modules/control/rc.c:1881
+#, c-format
+msgid "| discontinuities : %5i"
+msgstr "| 间断 : %5i"
+
+#: modules/control/rc.c:1885 modules/gui/ncurses.c:1993
+msgid "+-[Video Decoding]"
+msgstr "+-[视频解码]"
+
+#: modules/control/rc.c:1886 modules/gui/ncurses.c:1996
+#, c-format
+msgid "| video decoded : %5i"
+msgstr "| 已解码的视频 : %5i"
+
+#: modules/control/rc.c:1888 modules/gui/ncurses.c:1999
+#, c-format
+msgid "| frames displayed : %5i"
+msgstr "| 已显示的帧 : %5i"
+
+#: modules/control/rc.c:1890 modules/gui/ncurses.c:2002
+#, c-format
+msgid "| frames lost : %5i"
+msgstr "| 已丢失的帧 : %5i"
+
+#: modules/control/rc.c:1894 modules/gui/ncurses.c:2012
+msgid "+-[Audio Decoding]"
+msgstr "+-[音频解码]"
+
+#: modules/control/rc.c:1895 modules/gui/ncurses.c:2015
+#, c-format
+msgid "| audio decoded : %5i"
+msgstr "| 已解码的音频 : %5i"
+
+#: modules/control/rc.c:1897 modules/gui/ncurses.c:2018
+#, c-format
+msgid "| buffers played : %5i"
+msgstr "| 已播放的缓存 : %5i"
+
+#: modules/control/rc.c:1899 modules/gui/ncurses.c:2021
+#, c-format
+msgid "| buffers lost : %5i"
+msgstr "| 已丢失的缓存 : %5i"
+
+#: modules/control/rc.c:1903 modules/gui/ncurses.c:2029
+msgid "+-[Streaming]"
+msgstr "+-[流]"
+
+#: modules/control/rc.c:1904 modules/gui/ncurses.c:2032
+#, c-format
+msgid "| packets sent : %5i"
+msgstr "| 发送数据包 : %5i"
+
+#: modules/control/rc.c:1905 modules/gui/ncurses.c:2034
+#, c-format
+msgid "| bytes sent : %8.0f KiB"
+msgstr "| 发送字节数 : %8.0f KiB"
+
+#: modules/control/rc.c:1907
+#, c-format
+msgid "| sending bitrate : %6.0f kb/s"
+msgstr "| 正在发送的位率 : %6.0f kb/s"
+
+#: modules/control/signals.c:37
+msgid "Signals"
+msgstr "信号"
+
+#: modules/control/signals.c:40
+msgid "POSIX signals handling interface"
+msgstr "POSIX 信号处理界面"
+
+#: modules/control/telnet.c:72 modules/stream_out/raop.c:147
+msgid "Host"
+msgstr "主机"
+
+#: modules/control/telnet.c:73
+msgid ""
+"This is the host on which the interface will listen. It defaults to all "
+"network interfaces (0.0.0.0). If you want this interface to be available "
+"only on the local machine, enter \"127.0.0.1\"."
+msgstr ""
+"这是界面将要监听的主机。它默认给所有网络界面 (0.0.0.0)。如果您希望界面仅对本"
+"机可用请输入 \"127.0.0.1\"。"
+
+#: modules/control/telnet.c:77 modules/gui/macosx/open.m:200
+#: modules/gui/macosx/open.m:202 modules/gui/macosx/output.m:147
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:156
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:215
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:260
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:310
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:404
+#: modules/stream_out/rtp.c:112
+msgid "Port"
+msgstr "端口"
+
+#: modules/control/telnet.c:78
+msgid ""
+"This is the TCP port on which this interface will listen. It defaults to "
+"4212."
+msgstr "这是此界面将要监听的 TCP 端口。默认为 4212。"
+
+#: modules/control/telnet.c:82
+msgid ""
+"A single administration password is used to protect this interface. The "
+"default value is \"admin\"."
+msgstr "一个被用于保护此界面的简易管理员密码。默认值是 \"admin\"。"
+
+#: modules/control/telnet.c:96
+msgid "VLM remote control interface"
+msgstr "VLM 远程控制界面"
+
+#: modules/demux/aiff.c:49
+msgid "AIFF demuxer"
+msgstr "AIFF 去复用器"
+
+#: modules/demux/asf/asf.c:56
+msgid "ASF v1.0 demuxer"
+msgstr "ASF v1.0 去复用器"
+
+#: modules/demux/asf/asf.c:178
+msgid "Could not demux ASF stream"
+msgstr "无法去复用 ASF 流"
+
+#: modules/demux/asf/asf.c:179
+msgid "VLC failed to load the ASF header."
+msgstr "VLC 载入 ASF 头部失败。"
+
+#: modules/demux/au.c:50
+msgid "AU demuxer"
+msgstr "AV 去复用器"
+
+#: modules/demux/avformat/avformat.c:40
+msgid "FFmpeg demuxer"
+msgstr "FFmpeg 去复用器"
+
+#: modules/demux/avformat/avformat.c:41
+msgid "Avformat"
+msgstr "Avformat"
+
+#: modules/demux/avformat/avformat.c:49
+msgid "FFmpeg muxer"
+msgstr "FFmpeg 复用器"
+
+#: modules/demux/avformat/avformat.h:35
+msgid "Ffmpeg mux"
+msgstr "Ffmpeg 复用"
+
+#: modules/demux/avformat/avformat.h:36
+msgid "Force use of ffmpeg muxer."
+msgstr "强制使用 ffmpeg 复用器。"
+
+#: modules/demux/avi/avi.c:50
+msgid "Force interleaved method"
+msgstr "强制交错模式"
+
+#: modules/demux/avi/avi.c:51
+msgid "Force interleaved method."
+msgstr "前置交错模式。"
+
+#: modules/demux/avi/avi.c:53
+msgid "Force index creation"
+msgstr "强制创建缩影"
+
+#: modules/demux/avi/avi.c:55
+msgid ""
+"Recreate a index for the AVI file. Use this if your AVI file is damaged or "
+"incomplete (not seekable)."
+msgstr ""
+"为 AVI 文件创建一个缩影。如果您的 AVI 文件已损坏或不完整 (无法搜索) 请使用此"
+"功能。"
+
+#: modules/demux/avi/avi.c:63
+msgid "Ask for action"
+msgstr "询问操作"
+
+#: modules/demux/avi/avi.c:64
+msgid "Always fix"
+msgstr "总是修复"
+
+#: modules/demux/avi/avi.c:65
+msgid "Never fix"
+msgstr "不修复"
+
+#: modules/demux/avi/avi.c:69
+msgid "AVI demuxer"
+msgstr "AVI 去复用器"
+
+#: modules/demux/avi/avi.c:652
+msgid "AVI Index"
+msgstr "AVI 缩影"
+
+#: modules/demux/avi/avi.c:653
+msgid ""
+"This AVI file is broken. Seeking will not work correctly.\n"
+"Do you want to try to fix it?\n"
+"\n"
+"This might take a long time."
+msgstr ""
+"此 AVI 文件已经损坏。检索将无法正常工作。\n"
+"您要尝试修复它吗?\n"
+"\n"
+"这可能需要很长的时间。"
+
+#: modules/demux/avi/avi.c:656
+msgid "Repair"
+msgstr "修复"
+
+#: modules/demux/avi/avi.c:656
+msgid "Don't repair"
+msgstr "不修复"
+
+#: modules/demux/avi/avi.c:2357
+msgid "Fixing AVI Index..."
+msgstr "正在修复 AVI 索引..."
+
+#: modules/demux/cdg.c:43
+msgid "CDG demuxer"
+msgstr "CDG 去复用器"
+
+#: modules/demux/demuxdump.c:40
+msgid "Dump filename"
+msgstr "转储文件名"
+
+#: modules/demux/demuxdump.c:42
+msgid "Name of the file to which the raw stream will be dumped."
+msgstr "raw 流将被转储的文件名。"
+
+#: modules/demux/demuxdump.c:43
+msgid "Append to existing file"
+msgstr "附加到已存在的文件"
+
+#: modules/demux/demuxdump.c:45
+msgid "If the file already exists, it will not be overwritten."
+msgstr "如果文件已经存在,它将不会被覆盖。"
+
+#: modules/demux/demuxdump.c:54
+msgid "File dumper"
+msgstr "文件转储器"
+
+#: modules/demux/dirac.c:41
+msgid "Value to adjust dts by"
+msgstr "dts 数值调整量"
+
+#: modules/demux/dirac.c:54
+msgid "Dirac video demuxer"
+msgstr "Dirac 视频去复用器"
+
+#: modules/demux/flac.c:49
+msgid "FLAC demuxer"
+msgstr "FLAC 去复用器"
+
+#: modules/demux/gme.cpp:55
+msgid "GME demuxer (Game_Music_Emu)"
+msgstr "GME 去复用器 (Game_Music_Emu)"
+
+#: modules/demux/image.c:43
+#, fuzzy
+msgid "ES ID"
+msgstr "TS ID"
+
+#: modules/demux/image.c:51
+#, fuzzy
+msgid "Decode"
+msgstr "已解码"
+
+#: modules/demux/image.c:53
+msgid "Decode at the demuxer stage"
+msgstr ""
+
+#: modules/demux/image.c:55
+#, fuzzy
+msgid "Forced chroma"
+msgstr "图像色度"
+
+#: modules/demux/image.c:57
+msgid ""
+"If non empty and image-decode is true, the image will be converted to the "
+"specified chroma."
+msgstr ""
+
+#: modules/demux/image.c:60
+#, fuzzy
+msgid "Duration in second"
+msgstr "以毫秒为单位的持续时间"
+
+#: modules/demux/image.c:62
+msgid ""
+"Duration in second before simulating an end of file. A negative value means "
+"an unlimited play time."
+msgstr ""
+
+#: modules/demux/image.c:67
+#, fuzzy
+msgid "Frame rate of the elementary stream produced."
+msgstr "视频通量流的帧率"
+
+#: modules/demux/image.c:69
+#, fuzzy
+msgid "Real-time"
+msgstr "延迟时间"
+
+#: modules/demux/image.c:71
+msgid ""
+"Use real-time mode suitable for being used as a master input and real-time "
+"input slaves."
+msgstr ""
+
+#: modules/demux/image.c:75
+#, fuzzy
+msgid "Image demuxer"
+msgstr "AVI 去复用器"
+
+#: modules/demux/kate_categories.c:40
+msgid "Closed captions"
+msgstr "封闭字幕"
+
+#: modules/demux/kate_categories.c:42
+msgid "Textual audio descriptions"
+msgstr "原文音频描述"
+
+#: modules/demux/kate_categories.c:43
+msgid "Karaoke"
+msgstr "卡拉 OK"
+
+#: modules/demux/kate_categories.c:44
+msgid "Ticker text"
+msgstr "Ticker 文本"
+
+#: modules/demux/kate_categories.c:45
+msgid "Active regions"
+msgstr "活动区域"
+
+#: modules/demux/kate_categories.c:46
+msgid "Semantic annotations"
+msgstr "语义注解"
+
+#: modules/demux/kate_categories.c:48
+msgid "Transcript"
+msgstr "抄本"
+
+#: modules/demux/kate_categories.c:49 modules/demux/kate_categories.c:56
+#: modules/demux/mp4/mp4.c:961
+msgid "Lyrics"
+msgstr "歌词"
+
+#: modules/demux/kate_categories.c:50
+msgid "Linguistic markup"
+msgstr "语言标记"
+
+#: modules/demux/kate_categories.c:51
+msgid "Cue points"
+msgstr "起始端点"
+
+#: modules/demux/kate_categories.c:55 modules/demux/kate_categories.c:59
+msgid "Subtitles (images)"
+msgstr "字幕 (图像)"
+
+#: modules/demux/kate_categories.c:60
+msgid "Slides (text)"
+msgstr "幻灯片 (文本)"
+
+#: modules/demux/kate_categories.c:61
+msgid "Slides (images)"
+msgstr "幻灯片 (图像)"
+
+#: modules/demux/kate_categories.c:73
+msgid "Unknown category"
+msgstr "未知类别"
+
+#: modules/demux/live555.cpp:77
+msgid ""
+"Allows you to modify the default caching value for RTSP streams. This value "
+"should be set in millisecond units."
+msgstr "允许您修改 RTSP 流的默认缓存值。此值必须以毫秒为单位设置。"
+
+#: modules/demux/live555.cpp:80
+msgid "Kasenna RTSP dialect"
+msgstr "Kasenna RTSP 方言"
+
+#: modules/demux/live555.cpp:81
+msgid ""
+"Kasenna servers use an old and nonstandard dialect of RTSP. With this "
+"parameter VLC will try this dialect, but then it cannot connect to normal "
+"RTSP servers."
+msgstr ""
+"Kasenna 服务器使用一个旧的并且是非标准的 RTSP 方言。在您设置了此参数后,VLC "
+"将会尝试使用此方言通信,但在此模式中您不能连接普通的 RTSP 服务器。"
+
+#: modules/demux/live555.cpp:85
+msgid "WMServer RTSP dialect"
+msgstr "WMServer RTSP 方言"
+
+#: modules/demux/live555.cpp:86
+msgid ""
+"WMServer uses an unstandard dialect of RTSP. Selecting this parameter will "
+"tell VLC to assume some options contrary to RFC 2326 guidelines."
+msgstr ""
+"WMServer 使用了非标准的 RTSP 方言。选择此参数将让 VLC 采用一些与 RFC 2326 准"
+"则相抵触的选项。"
+
+#: modules/demux/live555.cpp:90
+msgid "RTSP user name"
+msgstr "RTSP 用户名"
+
+#: modules/demux/live555.cpp:91
+msgid ""
+"Sets the username for the connection, if no username or password are set in "
+"the url."
+msgstr "设置用于连接的用户名,如果 url 中未设定用户名或密码。"
+
+#: modules/demux/live555.cpp:93
+msgid "RTSP password"
+msgstr "RTSP 密码"
+
+#: modules/demux/live555.cpp:94
+msgid ""
+"Sets the password for the connection, if no username or password are set in "
+"the url."
+msgstr "设置用于连接的密码,如果 url 中未设定用户名或密码。"
+
+#: modules/demux/live555.cpp:98
+msgid "RTP/RTSP/SDP demuxer (using Live555)"
+msgstr "RTP/RTSP/SDP 去复用器 (使用 Live555)"
+
+#: modules/demux/live555.cpp:108
+msgid "RTSP/RTP access and demux"
+msgstr "RTSP/RTP 访问与去复用"
+
+#: modules/demux/live555.cpp:117 modules/demux/live555.cpp:118
+#: modules/gui/macosx/simple_prefs.m:261
+msgid "Use RTP over RTSP (TCP)"
+msgstr "使用 RTP over RTSP (TCP)"
+
+#: modules/demux/live555.cpp:121
+msgid "Client port"
+msgstr "客户端端口"
+
+#: modules/demux/live555.cpp:122
+msgid "Port to use for the RTP source of the session"
+msgstr "RTP 源会话使用的端口"
+
+#: modules/demux/live555.cpp:124 modules/demux/live555.cpp:125
+msgid "Force multicast RTP via RTSP"
+msgstr "通过 RTSP 强制多播 RTP"
+
+#: modules/demux/live555.cpp:128 modules/demux/live555.cpp:129
+msgid "Tunnel RTSP and RTP over HTTP"
+msgstr "通过 HTTP 通道使用 RTSP 和 RTP"
+
+#: modules/demux/live555.cpp:132
+msgid "HTTP tunnel port"
+msgstr "HTTP 隧道端口"
+
+#: modules/demux/live555.cpp:133
+msgid "Port to use for tunneling the RTSP/RTP over HTTP."
+msgstr "用于通过 HTTP 隧道 RTSP/RTP 的端口。"
+
+#: modules/demux/live555.cpp:602
+msgid "RTSP authentication"
+msgstr "RTSP 验证"
+
+#: modules/demux/live555.cpp:603
+msgid "Please enter a valid login name and a password."
+msgstr "请输入一个有效的登录名和密码。"
+
+#: modules/demux/mjpeg.c:45 modules/demux/mpeg/es.c:49
+#: modules/demux/mpeg/h264.c:43 modules/demux/rawvid.c:44
+#: modules/demux/vc1.c:43 modules/gui/macosx/playlistinfo.m:107
+msgid "Frames per Second"
+msgstr "每秒帧数"
+
+#: modules/demux/mjpeg.c:46
+msgid ""
+"This is the desired frame rate when playing MJPEG from a file. Use 0 (this "
+"is the default value) for a live stream (from a camera)."
+msgstr ""
+"这是一个在从一个文件播放 MJPEG 时的帧率。为一个实时流 (来自摄像机) 使用 0 (这"
+"是默认值)。"
+
+#: modules/demux/mjpeg.c:52
+msgid "M-JPEG camera demuxer"
+msgstr "M-JPEG 摄像机去复用器"
+
+#: modules/demux/mkv/chapter_command.cpp:146
+msgid "--- DVD Menu"
+msgstr "--- DVD 菜单"
+
+#: modules/demux/mkv/chapter_command.cpp:152
+msgid "First Played"
+msgstr "首先播放"
+
+#: modules/demux/mkv/chapter_command.cpp:154
+msgid "Video Manager"
+msgstr "视频管理器"
+
+#: modules/demux/mkv/chapter_command.cpp:160
+msgid "----- Title"
+msgstr "----- 标题"
+
+#: modules/demux/mkv/mkv.cpp:46
+msgid "Matroska stream demuxer"
+msgstr "Matroska 流去复用器"
+
+#: modules/demux/mkv/mkv.cpp:53
+msgid "Ordered chapters"
+msgstr "已排序的章节"
+
+#: modules/demux/mkv/mkv.cpp:54
+msgid "Play ordered chapters as specified in the segment."
+msgstr "播放在片段中的指定章节。"
+
+#: modules/demux/mkv/mkv.cpp:57
+msgid "Chapter codecs"
+msgstr "章节代码"
+
+#: modules/demux/mkv/mkv.cpp:58
+msgid "Use chapter codecs found in the segment."
+msgstr "使用章节代码在片段中查找。"
+
+#: modules/demux/mkv/mkv.cpp:61
+msgid "Preload Directory"
+msgstr "预载目录"
+
+#: modules/demux/mkv/mkv.cpp:62
+msgid ""
+"Preload matroska files from the same family in the same directory (not good "
+"for broken files)."
+msgstr "从相同的目录中预载一系列的 matroska 文件 (对损坏文件支持差)。"
+
+#: modules/demux/mkv/mkv.cpp:65
+msgid "Seek based on percent not time"
+msgstr "基于百分比非时间的搜索"
+
+#: modules/demux/mkv/mkv.cpp:66
+msgid "Seek based on percent not time."
+msgstr "基于百分比非时间的搜索。"
+
+#: modules/demux/mkv/mkv.cpp:69
+msgid "Dummy Elements"
+msgstr "空元素"
+
+#: modules/demux/mkv/mkv.cpp:70
+msgid "Read and discard unknown EBML elements (not good for broken files)."
+msgstr "读取并放弃未知的 EBML 元素 (对损坏的文件支持差)。"
+
+#: modules/demux/mod.c:54
+msgid "Enable noise reduction algorithm."
+msgstr "开启噪点消除算法。"
+
+#: modules/demux/mod.c:55
+msgid "Enable reverberation"
+msgstr "开启混响"
+
+#: modules/demux/mod.c:56
+msgid "Reverberation level (from 0 to 100, default value is 0)."
+msgstr "混响等级 (从 0 到 100, 默认值是 0)。"
+
+#: modules/demux/mod.c:58
+msgid "Reverberation delay, in ms. Usual values are from to 40 to 200ms."
+msgstr "以毫秒为单位的混响延迟。通常值是从 40 到 200 毫秒。"
+
+#: modules/demux/mod.c:60
+msgid "Enable megabass mode"
+msgstr "开启超重低音模式"
+
+#: modules/demux/mod.c:61
+msgid "Megabass mode level (from 0 to 100, default value is 0)."
+msgstr "超重低音模式等级 (从 0 到 100, 默认值是 0)。"
+
+#: modules/demux/mod.c:63
+msgid ""
+"Megabass mode cutoff frequency, in Hz. This is the maximum frequency for "
+"which the megabass effect applies. Valid values are from 10 to 100 Hz."
+msgstr ""
+"超重低音模式截至频率, 以 Hz 为单位。这是超重低音效果应用的最大频率。有效值从 "
+"10 到 100 Hz。"
+
+#: modules/demux/mod.c:66
+msgid "Surround effect level (from 0 to 100, default value is 0)."
+msgstr "环绕效果等级 (从 0 到 100, 默认值是 0)。"
+
+#: modules/demux/mod.c:68
+msgid "Surround delay, in ms. Usual values are from 5 to 40 ms."
+msgstr "环绕声延迟,以毫秒为单位。通常的值是从 5 到 40 毫秒。"
+
+#: modules/demux/mod.c:73
+msgid "MOD demuxer (libmodplug)"
+msgstr "MOD 去复用器 (libmodplug)"
+
+#: modules/demux/mod.c:81
+msgid "Reverb"
+msgstr "混响"
+
+#: modules/demux/mod.c:84
+msgid "Reverberation level"
+msgstr "混响等级"
+
+#: modules/demux/mod.c:86
+msgid "Reverberation delay"
+msgstr "混响延迟"
+
+#: modules/demux/mod.c:88
+msgid "Mega bass"
+msgstr "超重低音"
+
+#: modules/demux/mod.c:91
+msgid "Mega bass level"
+msgstr "超重低音等级"
+
+#: modules/demux/mod.c:93
+msgid "Mega bass cutoff"
+msgstr "超重低音截至频率"
+
+#: modules/demux/mod.c:95
+msgid "Surround"
+msgstr "环绕声"
+
+#: modules/demux/mod.c:98
+msgid "Surround level"
+msgstr "环绕声等级"
+
+#: modules/demux/mod.c:100
+msgid "Surround delay (ms)"
+msgstr "环绕声延迟 (毫秒)"
+
+#: modules/demux/mp4/mp4.c:55
+msgid "MP4 stream demuxer"
+msgstr "MP4 流去复用器"
+
+#: modules/demux/mp4/mp4.c:56
+msgid "MP4"
+msgstr "MP4"
+
+#: modules/demux/mp4/mp4.c:946
+msgid "Writer"
+msgstr ""
+
+#: modules/demux/mp4/mp4.c:947
+msgid "Composr"
+msgstr ""
+
+#: modules/demux/mp4/mp4.c:948
+msgid "Producer"
+msgstr ""
+
+#: modules/demux/mp4/mp4.c:949 modules/gui/macosx/playlistinfo.m:421
+#: modules/gui/qt4/components/controller.hpp:109
+#: modules/gui/qt4/components/controller.hpp:119
+msgid "Information"
+msgstr "信息"
+
+#: modules/demux/mp4/mp4.c:950
+#, fuzzy
+msgid "Director"
+msgstr "目录"
+
+#: modules/demux/mp4/mp4.c:951
+#, fuzzy
+msgid "Disclaimer"
+msgstr "放弃"
+
+#: modules/demux/mp4/mp4.c:952
+#, fuzzy
+msgid "Requirements"
+msgstr "片段"
+
+#: modules/demux/mp4/mp4.c:953
+#, fuzzy
+msgid "Original Format"
+msgstr "原始 ID"
+
+#: modules/demux/mp4/mp4.c:954
+#, fuzzy
+msgid "Display Source As"
+msgstr "显示模式"
+
+#: modules/demux/mp4/mp4.c:955
+#, fuzzy
+msgid "Host Computer"
+msgstr "我的电脑"
+
+#: modules/demux/mp4/mp4.c:956
+#, fuzzy
+msgid "Performers"
+msgstr "性能选项"
+
+#: modules/demux/mp4/mp4.c:957
+#, fuzzy
+msgid "Original Performer"
+msgstr "原始大小"
+
+#: modules/demux/mp4/mp4.c:958
+msgid "Providers Source Content"
+msgstr ""
+
+#: modules/demux/mp4/mp4.c:959
+msgid "Warning"
+msgstr ""
+
+#: modules/demux/mp4/mp4.c:960
+#, fuzzy
+msgid "Software"
+msgstr "AtmoWin 软件"
+
+#: modules/demux/mp4/mp4.c:962
+msgid "Make"
+msgstr ""
+
+#: modules/demux/mp4/mp4.c:963
+#, fuzzy
+msgid "Model"
+msgstr "模式"
+
+#: modules/demux/mp4/mp4.c:964
+msgid "Product"
+msgstr ""
+
+#: modules/demux/mp4/mp4.c:965
+#, fuzzy
+msgid "Grouping"
+msgstr "组"
+
+#: modules/demux/mpc.c:62
+msgid "MusePack demuxer"
+msgstr "MusePack 去复用器"
+
+#: modules/demux/mpeg/es.c:50
+msgid ""
+"This is the frame rate used as a fallback when playing MPEG video elementary "
+"streams."
+msgstr "这是在播放 MPEG 视频通量流时的备选帧率。"
+
+#: modules/demux/mpeg/es.c:56
+msgid "MPEG-I/II/4 / A52 / DTS / MLP audio"
+msgstr "MPEG-I/II/4 / A52 / DTS / MLP 音频"
+
+#: modules/demux/mpeg/es.c:78
+msgid "MPEG-4 video"
+msgstr "MPEG-4 视频"
+
+#: modules/demux/mpeg/h264.c:44
+msgid "Desired frame rate for the H264 stream."
+msgstr "H264 流的期望帧率。"
+
+#: modules/demux/mpeg/h264.c:51
+msgid "H264 video demuxer"
+msgstr "H264 视频去复用器"
+
+#: modules/demux/mpeg/mpgv.c:46
+msgid "MPEG-I/II video demuxer"
+msgstr "MPEG-I/II 视频去复用器"
+
+#: modules/demux/nsc.c:46
+msgid "Windows Media NSC metademux"
+msgstr "Windows Media NSC 元去复用器"
+
+#: modules/demux/nsv.c:49
+msgid "NullSoft demuxer"
+msgstr "NullSoft 去复用器"
+
+#: modules/demux/nuv.c:49
+msgid "Nuv demuxer"
+msgstr "Nuv 去复用器"
+
+#: modules/demux/ogg.c:54
+msgid "OGG demuxer"
+msgstr "OGG 去复用器"
+
+#: modules/demux/playlist/gvp.c:209
+msgid "Google Video"
+msgstr "Google 视频"
+
+#: modules/demux/playlist/playlist.c:44
+msgid "Auto start"
+msgstr "自动启动"
+
+#: modules/demux/playlist/playlist.c:45
+msgid "Automatically start playing the playlist content once it's loaded."
+msgstr "在播放列表被载入后自动开始播放其中的内容。"
+
+#: modules/demux/playlist/playlist.c:48
+msgid "Show shoutcast adult content"
+msgstr "显示 shoutcast 成人内容"
+
+#: modules/demux/playlist/playlist.c:49
+msgid "Show NC17 rated video streams when using shoutcast video playlists."
+msgstr "在使用视频播放列表时显示 NC17 分级的视频流。"
+
+#: modules/demux/playlist/playlist.c:52
+msgid "Skip ads"
+msgstr "跳过广告"
+
+#: modules/demux/playlist/playlist.c:53
+msgid ""
+"Use playlist options usually used to prevent ads skipping to detect ads and "
+"prevent adding them to the playlist."
+msgstr ""
+"使用播放列表选项通常被用于防治广告被跳过检测并防止添加它们到播放列表中。"
+
+#: modules/demux/playlist/playlist.c:72
+msgid "M3U playlist import"
+msgstr "导入 M3U 播放列表"
+
+#: modules/demux/playlist/playlist.c:80
+msgid "RAM playlist import"
+msgstr "RAM 播放列表导入"
+
+#: modules/demux/playlist/playlist.c:86
+msgid "PLS playlist import"
+msgstr "导入 PLS 播放列表"
+
+#: modules/demux/playlist/playlist.c:92
+msgid "B4S playlist import"
+msgstr "导入 B4S 播放列表"
+
+#: modules/demux/playlist/playlist.c:99
+msgid "DVB playlist import"
+msgstr "导入 DVB 播放列表"
+
+#: modules/demux/playlist/playlist.c:105
+msgid "Podcast parser"
+msgstr "Podcast 解析器"
+
+#: modules/demux/playlist/playlist.c:111
+msgid "XSPF playlist import"
+msgstr "导入 XSPF 播放列表"
+
+#: modules/demux/playlist/playlist.c:117
+msgid "New winamp 5.2 shoutcast import"
+msgstr "新建 winamp 5.2 shoutcast 导入"
+
+#: modules/demux/playlist/playlist.c:125
+msgid "ASX playlist import"
+msgstr "导入 ASX 播放列表"
+
+#: modules/demux/playlist/playlist.c:131
+msgid "Kasenna MediaBase parser"
+msgstr "Kasenna 媒体库解析器"
+
+#: modules/demux/playlist/playlist.c:137
+msgid "QuickTime Media Link importer"
+msgstr "QuickTime 媒体链接导入器"
+
+#: modules/demux/playlist/playlist.c:143
+msgid "Google Video Playlist importer"
+msgstr "Google 视频播放列表导入器"
+
+#: modules/demux/playlist/playlist.c:149
+msgid "Dummy ifo demux"
+msgstr "空 ifo 去复用"
+
+#: modules/demux/playlist/playlist.c:154
+msgid "iTunes Music Library importer"
+msgstr "iTunes 音乐库导入器"
+
+#: modules/demux/playlist/playlist.c:160
+msgid "WPL playlist import"
+msgstr "导入 WPL 播放列表"
+
+#: modules/demux/playlist/playlist.c:166
+msgid "ZPL playlist import"
+msgstr "导入 ZPL 播放列表"
+
+#: modules/demux/playlist/podcast.c:255 modules/demux/playlist/podcast.c:268
+#: modules/demux/playlist/podcast.c:308 modules/demux/playlist/podcast.c:329
+msgid "Podcast Info"
+msgstr "Podcast 信息"
+
+#: modules/demux/playlist/podcast.c:268
+msgid "Podcast Summary"
+msgstr "Podcast 摘要"
+
+#: modules/demux/playlist/podcast.c:330
+msgid "Podcast Size"
+msgstr "Podcast 大小"
+
+#: modules/demux/playlist/shoutcast.c:410
+msgid "Shoutcast"
+msgstr "Shoutcast"
+
+#: modules/demux/playlist/shoutcast.c:414
+msgid "Listeners"
+msgstr "收听者"
+
+#: modules/demux/playlist/shoutcast.c:415
+msgid "Load"
+msgstr "加载"
+
+#: modules/demux/ps.c:43
+msgid "Trust MPEG timestamps"
+msgstr "受信任的 MPEG 时间戳"
+
+#: modules/demux/ps.c:44
+msgid ""
+"Normally we use the timestamps of the MPEG files to calculate position and "
+"duration. However sometimes this might not be usable. Disable this option to "
+"calculate from the bitrate instead."
+msgstr ""
+"通常我们使用 MPEG 文件的时间戳来计算位置和持续时间。但是在某些时候这可能没有"
+"用。关闭此选项使用位率计算代替。"
+
+#: modules/demux/ps.c:56 modules/demux/ps.c:69
+msgid "MPEG-PS demuxer"
+msgstr "MPEG-PS 去复用器"
+
+#: modules/demux/ps.c:57
+msgid "PS"
+msgstr "PS"
+
+#: modules/demux/pva.c:43
+msgid "PVA demuxer"
+msgstr "PVA 去复用器"
+
+#: modules/demux/rawaud.c:43
+msgid "Audio samplerate (Hz)"
+msgstr "音频采样率 (Hz)"
+
+#: modules/demux/rawaud.c:44
+msgid "Audio sample rate in Hertz. Default is 48000 Hz."
+msgstr "音频采样率,单位为赫兹。默认为 48000 Hz。"
+
+#: modules/demux/rawaud.c:46 modules/stream_out/transcode/transcode.c:99
+msgid "Audio channels"
+msgstr "声道"
+
+#: modules/demux/rawaud.c:47
+msgid "Audio channels in input stream. Numeric value >0. Default is 2."
+msgstr "输入流的音频声道数。数值 >0。默认为 2。"
+
+#: modules/demux/rawaud.c:49
+msgid "FOURCC code of raw input format"
+msgstr "原始输入格式的 FOURCC 码"
+
+#: modules/demux/rawaud.c:51
+msgid "FOURCC code of the raw input format. This is a four character string."
+msgstr "raw 输入格式的 FOURCC 代码。这是个四位的字符串。"
+
+#: modules/demux/rawaud.c:53
+msgid "Forces the audio language"
+msgstr "强制音频语言"
+
+#: modules/demux/rawaud.c:54
+msgid ""
+"Forces the audio language for the output mux. Three letter ISO639 code. "
+"Default is 'eng'. "
+msgstr "强制输出混流的音频语言。三个字母的 ISO639 码。默认为 'eng'。"
+
+#: modules/demux/rawaud.c:64
+msgid "Raw audio demuxer"
+msgstr "raw 音频去复用器"
+
+#: modules/demux/rawdv.c:41
+msgid ""
+"The demuxer will advance timestamps if the input can't keep up with the rate."
+msgstr "如果输入不能保持帧率,那么去复用器将增加时间戳。"
+
+#: modules/demux/rawdv.c:49
+msgid "DV (Digital Video) demuxer"
+msgstr "DV (数字视频) 去复用器"
+
+#: modules/demux/rawvid.c:45
+msgid ""
+"This is the desired frame rate when playing raw video streams. In the form "
+"30000/1001 or 29.97"
+msgstr "播放 raw 视频流时所需的帧率。格式为 30000/1001 或 29.97"
+
+#: modules/demux/rawvid.c:49
+msgid "This specifies the width in pixels of the raw video stream."
+msgstr "这是为 raw 视频流指定宽度,以像素为单位。"
+
+#: modules/demux/rawvid.c:53
+msgid "This specifies the height in pixels of the raw video stream."
+msgstr "这是为 raw 视频流指定高度,以像素为单位。"
+
+#: modules/demux/rawvid.c:56
+msgid "Force chroma (Use carefully)"
+msgstr "强制色度 (谨慎使用)"
+
+#: modules/demux/rawvid.c:57
+msgid "Force chroma. This is a four character string."
+msgstr "强制色度。这是一个四字节的字串。"
+
+#: modules/demux/rawvid.c:59 modules/stream_out/switcher.c:96
+msgid "Aspect ratio"
+msgstr "高宽比"
+
+#: modules/demux/rawvid.c:61
+msgid "Aspect ratio (4:3, 16:9). Default assumes square pixels."
+msgstr "高宽比 (4:3, 16:9)。默认是方块像素。"
+
+#: modules/demux/rawvid.c:65
+msgid "Raw video demuxer"
+msgstr "Raw 去复用器"
+
+#: modules/demux/real.c:70
+msgid "Real demuxer"
+msgstr "Real 去复用器"
+
+#: modules/demux/smf.c:42
+msgid "SMF demuxer"
+msgstr "SMF 去复用器"
+
+#: modules/demux/subtitle.c:51 modules/demux/subtitle_asa.c:49
+msgid "Apply a delay to all subtitles (in 1/10s, eg 100 means 10s)."
+msgstr "为所有字幕应用一个延迟 (在 1/10 秒,例如 100 代表 10 秒)。"
+
+#: modules/demux/subtitle.c:53
+msgid ""
+"Override the normal frames per second settings. This will only work with "
+"MicroDVD and SubRIP (SRT) subtitles."
+msgstr "覆盖普通帧每秒设置。这仅工作于 MicroDVD 和 SubRTP (SRT) 字幕。"
+
+#: modules/demux/subtitle.c:56
+msgid ""
+"Force the subtiles format. Valid values are : \"microdvd\", \"subrip\", "
+"\"subviewer\", \"ssa1\", \"ssa2-4\", \"ass\", \"vplayer\", \"sami\", "
+"\"dvdsubtitle\", \"mpl2\", \"aqt\", \"pjs\", \"mpsub\", \"jacosub\", \"psb"
+"\", \"realtext\", \"dks\", \"subviewer1\", and \"auto\" (meaning "
+"autodetection, this should always work)."
+msgstr ""
+"强制字幕格式。可用的值是 : \"microdvd\", \"subrip\", \"subviewer\", "
+"\"ssa1\", \"ssa2-4\", \"ass\", \"vplayer\", \"sami\", \"dvdsubtitle\", "
+"\"mpl2\", \"aqt\", \"pjs\", \"mpsub\", \"jacosub\", \"psb\", \"realtext\", "
+"\"dks\", \"subviewer1\", 和 \"auto\" (自动检测,此选项应该总是有效)。"
+
+#: modules/demux/subtitle.c:62
+msgid "Override the default track description."
+msgstr "覆盖默认轨道描述。"
+
+#: modules/demux/subtitle.c:74 modules/demux/subtitle_asa.c:58
+msgid "Text subtitles parser"
+msgstr "文本字幕解析器"
+
+#: modules/demux/subtitle.c:79 modules/demux/subtitle_asa.c:63
+msgid "Frames per second"
+msgstr "帧每秒"
+
+#: modules/demux/subtitle.c:82 modules/demux/subtitle_asa.c:66
+msgid "Subtitles delay"
+msgstr "字幕延迟"
+
+#: modules/demux/subtitle.c:84 modules/demux/subtitle_asa.c:68
+msgid "Subtitles format"
+msgstr "字幕格式"
+
+#: modules/demux/subtitle.c:87
+msgid "Subtitles description"
+msgstr "字幕描述"
+
+#: modules/demux/subtitle_asa.c:51
+msgid ""
+"Override the normal frames per second settings. This will only affect frame-"
+"based subtitle formats without a fixed value."
+msgstr "覆盖每秒普通帧的设置。这将只对基于字幕格式没有固定值的帧生效。"
+
+#: modules/demux/subtitle_asa.c:54
+msgid ""
+"Force the subtiles format. Use \"auto\", the set of supported values varies."
+msgstr "强制字幕格式。使用 \"自动\", 支持变量值。"
+
+#: modules/demux/subtitle_asa.c:57
+msgid "Subtitles (asa demuxer)"
+msgstr "字幕 (asa 去复用器)"
+
+#: modules/demux/ts.c:110
+msgid "Extra PMT"
+msgstr "扩展 PMT"
+
+#: modules/demux/ts.c:112
+msgid "Allows a user to specify an extra pmt (pmt_pid=pid:stream_type[,...])."
+msgstr "允许用户指定一个扩展 pmt (pmt_pid=pid:stream_type[,...])。"
+
+#: modules/demux/ts.c:114
+msgid "Set id of ES to PID"
+msgstr "设置 ES 的 id 为 PID"
+
+#: modules/demux/ts.c:115
+msgid ""
+"Set the internal ID of each elementary stream handled by VLC to the same "
+"value as the PID in the TS stream, instead of 1, 2, 3, etc. Useful to do "
+"'#duplicate{..., select=\"es=<pid>\"}'."
+msgstr ""
+"设置每个被 VLC 处理的通量流内部 ID 作为在 TS 流内部的 PID。代替 1, 2, 3, 等。"
+"用于执行 #duplicate{..., select=\"es=<pid>\"}'。"
+
+#: modules/demux/ts.c:120
+msgid "Fast udp streaming"
+msgstr "快速 udp 流"
+
+#: modules/demux/ts.c:122
+msgid "Sends TS to specific ip:port by udp (you must know what you are doing)."
+msgstr "通过 udp 发送 TS 到指定的 ip:端口 (您必须知道您在做什么)。"
+
+#: modules/demux/ts.c:124
+msgid "MTU for out mode"
+msgstr "用于输出模式的 MTU"
+
+#: modules/demux/ts.c:125
+msgid "MTU for out mode."
+msgstr "用于输出模式的 MTU。"
+
+#: modules/demux/ts.c:127
+msgid "CSA ck"
+msgstr "CSA ck"
+
+#: modules/demux/ts.c:128
+msgid "Control word for the CSA encryption algorithm"
+msgstr "用于 CSA 加密算法的控制字符"
+
+#: modules/demux/ts.c:130 modules/mux/mpeg/ts.c:172
+msgid "Second CSA Key"
+msgstr "第二 CSA 密匙"
+
+#: modules/demux/ts.c:131 modules/mux/mpeg/ts.c:173
+msgid ""
+"The even CSA encryption key. This must be a 16 char string (8 hexadecimal "
+"bytes)."
+msgstr "第二个 CSA 加密密匙。这必须是一个 16 字节的字串 (8 十六进制字节)。"
+
+#: modules/demux/ts.c:134
+msgid "Silent mode"
+msgstr "静默模式"
+
+#: modules/demux/ts.c:135
+msgid "Do not complain on encrypted PES."
+msgstr "不在加密的 PES 中显示。"
+
+#: modules/demux/ts.c:137
+msgid "CAPMT System ID"
+msgstr "CAPMT 系统 ID"
+
+#: modules/demux/ts.c:138
+msgid "Only forward descriptors from this SysID to the CAM."
+msgstr "仅来自此 SysID 到 CAM 的前进描述符。"
+
+#: modules/demux/ts.c:140
+msgid "Packet size in bytes to decrypt"
+msgstr "以字节为单位的要解密的数据包大小"
+
+#: modules/demux/ts.c:141
+msgid ""
+"Specify the size of the TS packet to decrypt. The decryption routines "
+"subtract the TS-header from the value before decrypting. "
+msgstr "指定要解密的 TS 数据包大小。解密通常要在之前从值中去掉 TS 头部。"
+
+#: modules/demux/ts.c:145
+msgid "Filename of dump"
+msgstr "转储的文件名"
+
+#: modules/demux/ts.c:146
+msgid "Specify a filename where to dump the TS in."
+msgstr "指定 TS 要转储的文件名。"
+
+#: modules/demux/ts.c:148
+msgid "Append"
+msgstr "附加"
+
+#: modules/demux/ts.c:150
+msgid ""
+"If the file exists and this option is selected, the existing file will not "
+"be overwritten."
+msgstr "如果文件已存在并且选中了此选项,已存在的文件将不会被覆盖。"
+
+#: modules/demux/ts.c:153
+msgid "Dump buffer size"
+msgstr "转储缓冲大小"
+
+#: modules/demux/ts.c:155
+msgid ""
+"Tweak the buffer size for reading and writing an integer number of packets."
+"Specify the size of the buffer here and not the number of packets."
+msgstr ""
+"为读取和写入一个整数数据优化缓存大小。在这里指定缓存大小并不是数据包数。"
+
+#: modules/demux/ts.c:158
+msgid "Separate sub-streams"
+msgstr "分离子流"
+
+#: modules/demux/ts.c:160
+msgid ""
+"Separate teletex/dvbs pages into independant ES. It can be usefull to turn "
+"off this option when using stream output."
+msgstr ""
+"将 teletex/dvb 页面分为独立的基本流。当使用流输出时关闭此选项可能有用。"
+
+#: modules/demux/ts.c:164
+msgid "MPEG Transport Stream demuxer"
+msgstr "MPEG 传输流去复用器"
+
+#: modules/demux/ts.c:195 modules/gui/macosx/controls.m:1132
+#: modules/gui/macosx/intf.m:703 modules/gui/qt4/dialogs/toolbar.cpp:407
+msgid "Teletext"
+msgstr "电报"
+
+#: modules/demux/ts.c:196
+msgid "Teletext subtitles"
+msgstr "Teletext 字幕"
+
+#: modules/demux/ts.c:197
+msgid "Teletext: additional information"
+msgstr "Teletext: 附加信息"
+
+#: modules/demux/ts.c:198
+msgid "Teletext: program schedule"
+msgstr "Teletext: 节目表"
+
+#: modules/demux/ts.c:199
+msgid "Teletext subtitles: hearing impaired"
+msgstr "Teletext 字幕: 听力障碍"
+
+#: modules/demux/ts.c:3558
+msgid "DVB subtitles: hearing impaired"
+msgstr "DVB 字幕: 听力障碍"
+
+#: modules/demux/ts.c:3850 modules/demux/ts.c:3892
+msgid "clean effects"
+msgstr "清除效果"
+
+#: modules/demux/ts.c:3854 modules/demux/ts.c:3896
+msgid "hearing impaired"
+msgstr "听力障碍"
+
+#: modules/demux/ts.c:3858 modules/demux/ts.c:3900
+msgid "visual impaired commentary"
+msgstr "可见的损坏报道"
+
+#: modules/demux/tta.c:45
+msgid "TTA demuxer"
+msgstr "TTA 去复用器"
+
+#: modules/demux/ty.c:59
+msgid "TY"
+msgstr "TY"
+
+#: modules/demux/ty.c:60
+msgid "TY Stream audio/video demux"
+msgstr "TY 流音频/视频去复用器"
+
+#: modules/demux/ty.c:773
+msgid "Closed captions 1"
+msgstr "封闭字幕 1"
+
+#: modules/demux/ty.c:774
+msgid "Closed captions 2"
+msgstr "封闭字幕 2"
+
+#: modules/demux/ty.c:775
+msgid "Closed captions 3"
+msgstr "封闭字幕 3"
+
+#: modules/demux/ty.c:776
+msgid "Closed captions 4"
+msgstr "封闭字幕 4"
+
+#: modules/demux/vc1.c:44
+msgid "Desired frame rate for the VC-1 stream."
+msgstr "VC-1 流的期望帧率。"
+
+#: modules/demux/vc1.c:50
+msgid "VC1 video demuxer"
+msgstr "VC1 去复用器"
+
+#: modules/demux/vobsub.c:52
+msgid "Vobsub subtitles parser"
+msgstr "Vobsub 字幕解释器"
+
+#: modules/demux/voc.c:44
+msgid "VOC demuxer"
+msgstr "VOC 去复用器"
+
+#: modules/demux/wav.c:45
+msgid "WAV demuxer"
+msgstr "WAV 去复用器"
+
+#: modules/demux/xa.c:43
+msgid "XA demuxer"
+msgstr "XA 去复用器"
+
+#: modules/gui/fbosd.c:101 modules/video_output/fb.c:56
+msgid "Framebuffer device"
+msgstr "帧缓冲设备"
+
+#: modules/gui/fbosd.c:103 modules/video_output/fb.c:58
+msgid "Framebuffer device to use for rendering (usually /dev/fb0)."
+msgstr "要用于渲染的帧缓冲设备 (通常是 /dev/fb0)。"
+
+#: modules/gui/fbosd.c:105
+msgid "Video aspect ratio"
+msgstr "视频高宽比"
+
+#: modules/gui/fbosd.c:107
+msgid "Aspect ratio of the video image (4:3, 16:9). Default is square pixels."
+msgstr "视频图像的高宽比 (4:3, 16:9)。默认是方块像素。"
+
+#: modules/gui/fbosd.c:109
+msgid "Image file"
+msgstr "图像文件"
+
+#: modules/gui/fbosd.c:111
+msgid "Filename of image file to use on the overlay framebuffer."
+msgstr "要勇于覆盖帧缓冲的图像文件的文件名。"
+
+#: modules/gui/fbosd.c:113
+msgid "Transparency of the image"
+msgstr "图像透明度"
+
+#: modules/gui/fbosd.c:114
+msgid ""
+"Transparency value of the new image used in blending. By default it set to "
+"fully opaque (255). (from 0 for full transparency to 255 for full opacity)"
+msgstr ""
+"用于混合的新图像的透明值。默认是设置为完全不透明 (255)。(从 0 为完全透明到 "
+"255 为完全不透明)"
+
+#: modules/gui/fbosd.c:118 modules/misc/logger.c:112
+#: modules/video_filter/marq.c:86
+msgid "Text"
+msgstr "文本"
+
+#: modules/gui/fbosd.c:119
+msgid "Text to display on the overlay framebuffer."
+msgstr "要在覆盖帧缓冲上显示的文本。"
+
+#: modules/gui/fbosd.c:121 modules/video_filter/audiobargraph_v.c:50
+#: modules/video_filter/erase.c:57 modules/video_filter/logo.c:57
+#: modules/video_filter/osdmenu.c:50
+msgid "X coordinate"
+msgstr "X 坐标"
+
+#: modules/gui/fbosd.c:122
+msgid "X coordinate of the rendered image"
+msgstr "渲染图像的 X 坐标"
+
+#: modules/gui/fbosd.c:124 modules/video_filter/audiobargraph_v.c:52
+#: modules/video_filter/erase.c:59 modules/video_filter/logo.c:60
+#: modules/video_filter/osdmenu.c:53
+msgid "Y coordinate"
+msgstr "Y 坐标"
+
+#: modules/gui/fbosd.c:125
+msgid "Y coordinate of the rendered image"
+msgstr "渲染图像的 Y 坐标"
+
+#: modules/gui/fbosd.c:129
+msgid ""
+"You can enforce the picture position on the overlay (0=center, 1=left, "
+"2=right, 4=top, 8=bottom, you can also use combinations of these values, e."
+"g. 6=top-right)."
+msgstr ""
+"您可以强制指定覆盖上的图像位置 (0=居中、1=左、2=右、4=上、8=下,您也可以混合"
+"使用这些值,例如 6=右上)。"
+
+#: modules/gui/fbosd.c:133 modules/misc/freetype.c:104
+#: modules/misc/win32text.c:65 modules/video_filter/marq.c:115
+#: modules/video_filter/rss.c:146
+msgid "Opacity"
+msgstr "不透明度"
+
+#: modules/gui/fbosd.c:134 modules/video_filter/marq.c:116
+msgid ""
+"Opacity (inverse of transparency) of overlayed text. 0 = transparent, 255 = "
+"totally opaque. "
+msgstr "覆盖文本的不透明度 (相对于透明度)。0 = 透明,255 = 完全不透明。"
+
+#: modules/gui/fbosd.c:137 modules/video_filter/marq.c:118
+#: modules/video_filter/rss.c:150
+msgid "Font size, pixels"
+msgstr "字体大小,像素"
+
+#: modules/gui/fbosd.c:138 modules/video_filter/marq.c:119
+#: modules/video_filter/rss.c:151
+msgid "Font size, in pixels. Default is -1 (use default font size)."
+msgstr "以像素为单位的字体大小。默认是 -1 (使用默认字体大小)。"
+
+#: modules/gui/fbosd.c:142 modules/video_filter/marq.c:123
+#: modules/video_filter/rss.c:155
+msgid ""
+"Color of the text that will be rendered on the video. This must be an "
+"hexadecimal (like HTML colors). The first two chars are for red, then green, "
+"then blue. #000000 = black, #FF0000 = red, #00FF00 = green, #FFFF00 = yellow "
+"(red + green), #FFFFFF = white"
+msgstr ""
+"要视频上渲染的文本颜色。这必须是一个十六进制值 (类似 HTML 颜色)。前两个字节是"
+"红,然后是绿、栏。#000000 = 黑、#FF0000 = 红、#00FF00 = 绿、#FFFF00 = 黄 (红 "
+"+ 绿)、#FFFFFF = 白"
+
+#: modules/gui/fbosd.c:147
+msgid "Clear overlay framebuffer"
+msgstr "清理覆盖帧缓冲"
+
+#: modules/gui/fbosd.c:148
+msgid ""
+"The displayed overlay images is cleared by making the overlay completely "
+"transparent. All previously rendered images and text will be cleared from "
+"the cache."
+msgstr ""
+"通过使覆盖完全透明就清除显示的覆盖图像。所有之前渲染的图像和文本将会从缓存中"
+"清除。"
+
+#: modules/gui/fbosd.c:152
+msgid "Render text or image"
+msgstr "渲染文本或图像"
+
+#: modules/gui/fbosd.c:153
+msgid "Render the image or text in current overlay buffer."
+msgstr "在当前的覆盖缓冲中渲染图像或文本。"
+
+#: modules/gui/fbosd.c:156
+msgid "Display on overlay framebuffer"
+msgstr "在覆盖缓冲上显示"
+
+#: modules/gui/fbosd.c:157
+msgid ""
+"All rendered images and text will be displayed on the overlay framebuffer."
+msgstr "所有已渲染的图像和文本将会在覆盖缓冲上显示。"
+
+#: modules/gui/fbosd.c:203 modules/gui/macosx/simple_prefs.m:283
+#: modules/misc/freetype.c:91 modules/misc/notify/xosd.c:80
+#: modules/misc/quartztext.c:80 modules/misc/win32text.c:58
+#: modules/video_filter/marq.c:163 modules/video_filter/rss.c:206
+msgid "Font"
+msgstr "字体"
+
+#: modules/gui/fbosd.c:212
+msgid "Commands"
+msgstr "命令"
+
+#: modules/gui/fbosd.c:217
+msgid "GNU/Linux osd/overlay framebuffer interface"
+msgstr "GNU/Linux osd/覆盖缓冲界面"
+
+#: modules/gui/macosx/about.m:86 modules/gui/macosx/intf.m:616
+msgid "About VLC media player"
+msgstr "关于 VLC media player"
+
+#: modules/gui/macosx/about.m:90
+#, c-format
+msgid "Compiled by %s"
+msgstr "由 %s 编译"
+
+#: modules/gui/macosx/about.m:98
+msgid "VLC was brought to you by:"
+msgstr "VLC 给您带来了:"
+
+#: modules/gui/macosx/about.m:108 modules/gui/macosx/about.m:173
+#: modules/gui/macosx/intf.m:729 modules/gui/qt4/dialogs/help.cpp:166
+msgid "License"
+msgstr "许可"
+
+#: modules/gui/macosx/about.m:186
+msgid "VLC media player Help"
+msgstr "VLC media player 帮助"
+
+#: modules/gui/macosx/about.m:189 modules/gui/macosx/controls.m:540
+#: modules/gui/macosx/intf.m:705
+msgid "Index"
+msgstr "索引"
+
+#: modules/gui/macosx/bookmarks.m:87
+msgid "Bookmarks"
+msgstr "书签"
+
+#: modules/gui/macosx/bookmarks.m:88
+msgid "Add"
+msgstr "添加"
+
+#: modules/gui/macosx/bookmarks.m:89 modules/gui/macosx/intf.m:642
+#: modules/gui/macosx/simple_prefs.m:246
+#: modules/gui/qt4/components/preferences_widgets.cpp:1206
+#: modules/gui/qt4/dialogs/bookmarks.cpp:47
+msgid "Clear"
+msgstr "清除"
+
+#: modules/gui/macosx/bookmarks.m:90 modules/gui/macosx/intf.m:638
+msgid "Edit"
+msgstr "编辑"
+
+#: modules/gui/macosx/bookmarks.m:91 modules/gui/qt4/dialogs/bookmarks.cpp:50
+#: modules/video_filter/extract.c:75
+msgid "Extract"
+msgstr "释放"
+
+#: modules/gui/macosx/bookmarks.m:92
+msgid "Remove"
+msgstr "移除"
+
+#: modules/gui/macosx/bookmarks.m:98 modules/gui/macosx/bookmarks.m:104
+#: modules/gui/qt4/dialogs/bookmarks.cpp:67
+#: modules/gui/qt4/dialogs/toolbar.cpp:363
+msgid "Time"
+msgstr "时间"
+
+#: modules/gui/macosx/bookmarks.m:101 modules/gui/macosx/bookmarks.m:213
+#: modules/gui/macosx/bookmarks.m:221 modules/gui/macosx/bookmarks.m:271
+#: modules/gui/macosx/bookmarks.m:279 modules/gui/macosx/controls.m:61
+#: modules/gui/macosx/coredialogs.m:67 modules/gui/macosx/coredialogs.m:105
+#: modules/gui/macosx/coredialogs.m:163 modules/gui/macosx/extended.m:518
+#: modules/gui/macosx/open.m:320 modules/gui/macosx/output.m:138
+#: modules/gui/macosx/playlistinfo.m:398 modules/gui/macosx/simple_prefs.m:245
+#: modules/gui/macosx/wizard.m:600 modules/gui/macosx/wizard.m:663
+#: modules/gui/macosx/wizard.m:1062 modules/gui/macosx/wizard.m:1147
+#: modules/gui/macosx/wizard.m:1154 modules/gui/macosx/wizard.m:1678
+#: modules/gui/macosx/wizard.m:1686 modules/gui/macosx/wizard.m:1867
+#: modules/gui/macosx/wizard.m:1878 modules/gui/macosx/wizard.m:1891
+#: modules/gui/qt4/components/open_panels.cpp:1264
+#: modules/gui/qt4/components/preferences_widgets.cpp:1426
+#: modules/gui/qt4/dialogs/firstrun.cpp:100
+msgid "OK"
+msgstr "确定"
+
+#: modules/gui/macosx/bookmarks.m:103 modules/gui/macosx/playlist.m:135
+#: modules/gui/macosx/playlist.m:139 modules/gui/qt4/dialogs/plugins.cpp:101
+msgid "Name"
+msgstr "名称"
+
+#: modules/gui/macosx/bookmarks.m:126 modules/gui/macosx/playlist.m:742
+msgid "Untitled"
+msgstr "无标题"
+
+#: modules/gui/macosx/bookmarks.m:213
+msgid "No input"
+msgstr "无输入"
+
+#: modules/gui/macosx/bookmarks.m:214
+msgid ""
+"No input found. A stream must be playing or paused for bookmarks to work."
+msgstr "找不到输入。必须有一个正在播放或暂停的流书签才能工作。"
+
+#: modules/gui/macosx/bookmarks.m:221
+msgid "Input has changed"
+msgstr "输入已被更改"
+
+#: modules/gui/macosx/bookmarks.m:222
+msgid ""
+"Input has changed, unable to save bookmark. Suspending playback with \"Pause"
+"\" while editing bookmarks to ensure to keep the same input."
+msgstr ""
+"输入已被更改,无法保存书签。在确认正在编辑的书签有相同的输入时通过 \"暂停\" "
+"终止播放。"
+
+#: modules/gui/macosx/bookmarks.m:271 modules/gui/macosx/wizard.m:1062
+msgid "Invalid selection"
+msgstr "无效的选择"
+
+#: modules/gui/macosx/bookmarks.m:273
+msgid "Two bookmarks have to be selected."
+msgstr "选定了两个书签。"
+
+#: modules/gui/macosx/bookmarks.m:279
+msgid "No input found"
+msgstr "找不到输入"
+
+#: modules/gui/macosx/bookmarks.m:281
+msgid "The stream must be playing or paused for bookmarks to work."
+msgstr "必须是一个正在播放或暂停的流书签才能工作。"
+
+#: modules/gui/macosx/controls.m:59 modules/gui/macosx/controls.m:1068
+msgid "Jump To Time"
+msgstr "跳转到时间"
+
+#: modules/gui/macosx/controls.m:62
+msgid "sec."
+msgstr "秒"
+
+#: modules/gui/macosx/controls.m:63
+msgid "Jump to time"
+msgstr "跳转到时间"
+
+#: modules/gui/macosx/controls.m:480 modules/gui/macosx/controls.m:1082
+#: modules/gui/macosx/intf.m:681
+msgid "Half Size"
+msgstr "一半尺寸"
+
+#: modules/gui/macosx/controls.m:482 modules/gui/macosx/controls.m:1083
+#: modules/gui/macosx/controls.m:1130 modules/gui/macosx/intf.m:682
+msgid "Normal Size"
+msgstr "普通尺寸"
+
+#: modules/gui/macosx/controls.m:484 modules/gui/macosx/controls.m:1084
+#: modules/gui/macosx/intf.m:683
+msgid "Double Size"
+msgstr "双倍尺寸"
+
+#: modules/gui/macosx/controls.m:486 modules/gui/macosx/controls.m:1088
+#: modules/gui/macosx/controls.m:1100 modules/gui/macosx/intf.m:686
+msgid "Float on Top"
+msgstr "悬浮在顶部"
+
+#: modules/gui/macosx/controls.m:488 modules/gui/macosx/controls.m:1085
+#: modules/gui/macosx/intf.m:684
+msgid "Fit to Screen"
+msgstr "适合屏幕"
+
+#: modules/gui/macosx/controls.m:813
+msgid "Lock Aspect Ratio"
+msgstr "锁定宽高比"
+
+#: modules/gui/macosx/controls.m:825 modules/gui/macosx/intf.m:630
+#: modules/gui/macosx/intf.m:698 modules/gui/qt4/menus.cpp:616
+msgid "Open File..."
+msgstr "打开文件..."
+
+#: modules/gui/macosx/controls.m:1059 modules/gui/macosx/intf.m:656
+#: modules/gui/qt4/menus.cpp:490
+msgid "Quit after Playback"
+msgstr "播放后退出"
+
+#: modules/gui/macosx/controls.m:1066 modules/gui/macosx/intf.m:657
+msgid "Step Forward"
+msgstr "向前步进"
+
+#: modules/gui/macosx/controls.m:1067 modules/gui/macosx/intf.m:658
+msgid "Step Backward"
+msgstr "向后步进"
+
+#: modules/gui/macosx/coredialogs.m:64 modules/gui/macosx/simple_prefs.m:235
+#: modules/gui/qt4/dialogs/external.cpp:119
+msgid "User name"
+msgstr "用户名"
+
+#: modules/gui/macosx/coredialogs.m:244
+msgid "Errors and Warnings"
+msgstr "错误和警告"
+
+#: modules/gui/macosx/coredialogs.m:245
+msgid "Clean up"
+msgstr "清除"
+
+#: modules/gui/macosx/coredialogs.m:246
+msgid "Show Details"
+msgstr "显示详细信息"
+
+#: modules/gui/macosx/embeddedwindow.m:66 modules/gui/macosx/intf.m:600
+msgid "Rewind"
+msgstr "快倒"
+
+#: modules/gui/macosx/embeddedwindow.m:67 modules/gui/macosx/intf.m:603
+msgid "Fast Forward"
+msgstr "快进"
+
+#: modules/gui/macosx/equalizer.m:146
+msgid "2 Pass"
+msgstr "2 重"
+
+#: modules/gui/macosx/equalizer.m:147
+msgid "Apply the equalizer filter twice. The effect will be sharper."
+msgstr "应用两次均衡器滤镜。效果将会更清晰。"
+
+#: modules/gui/macosx/equalizer.m:150
+msgid "Enable the equalizer. Bands can be set manually or using a preset."
+msgstr "开启均衡器。波段可用设置设置或者使用一个预设。"
+
+#: modules/gui/macosx/equalizer.m:152
+msgid "Preamp"
+msgstr "前置放大"
+
+#: modules/gui/macosx/extended.m:68
+msgid "Extended controls"
+msgstr "外部控制"
+
+#: modules/gui/macosx/extended.m:69
+msgid "Shows more information about the available video filters."
+msgstr "显示更多有关可用视频滤镜的信息。"
+
+#: modules/gui/macosx/extended.m:70 modules/video_filter/wave.c:54
+msgid "Wave"
+msgstr "波形"
+
+#: modules/gui/macosx/extended.m:71 modules/video_filter/ripple.c:53
+msgid "Ripple"
+msgstr "涟漪"
+
+#: modules/gui/macosx/extended.m:72 modules/meta_engine/id3genres.h:95
+#: modules/video_filter/psychedelic.c:55
+msgid "Psychedelic"
+msgstr "幻觉"
+
+#: modules/gui/macosx/extended.m:73 modules/video_filter/gradient.c:76
+#: modules/video_filter/gradient.c:82
+msgid "Gradient"
+msgstr "斜度"
+
+#: modules/gui/macosx/extended.m:74
+msgid "General editing filters"
+msgstr "常规编辑滤镜"
+
+#: modules/gui/macosx/extended.m:75
+msgid "Distortion filters"
+msgstr "曲解滤镜"
+
+#: modules/gui/macosx/extended.m:76
+msgid "Blur"
+msgstr "模糊"
+
+#: modules/gui/macosx/extended.m:77
+msgid "Adds motion blurring to the image"
+msgstr "添加动态模糊到图像中"
+
+#: modules/gui/macosx/extended.m:79
+msgid "Creates several copies of the Video output window"
+msgstr "创建数个视频输出窗口的副本"
+
+#: modules/gui/macosx/extended.m:81
+msgid "Image cropping"
+msgstr "图像裁剪"
+
+#: modules/gui/macosx/extended.m:82
+msgid "Crops a defined part of the image"
+msgstr "裁剪一个定义部分的图像"
+
+#: modules/gui/macosx/extended.m:83
+msgid "Invert colors"
+msgstr "反转色彩"
+
+#: modules/gui/macosx/extended.m:84
+msgid "Inverts the colors of the image"
+msgstr "反转图像的色彩"
+
+#: modules/gui/macosx/extended.m:85 modules/video_filter/transform.c:77
+msgid "Transformation"
+msgstr "变化"
+
+#: modules/gui/macosx/extended.m:86
+msgid "Rotates or flips the image"
+msgstr "旋转或倒转图像"
+
+#: modules/gui/macosx/extended.m:87
+msgid "Interactive Zoom"
+msgstr "交互缩放"
+
+#: modules/gui/macosx/extended.m:88
+msgid "Enables an interactive Zoom feature"
+msgstr "开启交互缩放功能"
+
+#: modules/gui/macosx/extended.m:89
+msgid "Volume normalization"
+msgstr "音频规格化"
+
+#: modules/gui/macosx/extended.m:90
+msgid "Prevents the audio output from going over a predefined value."
+msgstr "防止音频输出音量超过预定的值。"
+
+#: modules/gui/macosx/extended.m:92
+msgid "Headphone virtualization"
+msgstr "耳机虚拟化"
+
+#: modules/gui/macosx/extended.m:93
+msgid "Imitates the effect of surround sound when using headphones."
+msgstr "在使用耳机时模仿环绕立体声的效果。"
+
+#: modules/gui/macosx/extended.m:95
+msgid "Maximum level"
+msgstr "最大等级"
+
+#: modules/gui/macosx/extended.m:96
+msgid "Restore Defaults"
+msgstr "还原为默认值"
+
+#: modules/gui/macosx/extended.m:103 modules/gui/macosx/macosx.m:58
+msgid "Opaqueness"
+msgstr "不透明"
+
+#: modules/gui/macosx/extended.m:173 modules/gui/macosx/extended.m:235
+msgid "Adjust Image"
+msgstr "调节图像"
+
+#: modules/gui/macosx/extended.m:174 modules/gui/macosx/extended.m:239
+msgid "Video Filter"
+msgstr "视频滤镜"
+
+#: modules/gui/macosx/extended.m:175 modules/gui/macosx/extended.m:237
+msgid "Audio Filter"
+msgstr "音频滤镜"
+
+#: modules/gui/macosx/extended.m:517
+msgid "About the video filters"
+msgstr "关于视频滤镜"
+
+#: modules/gui/macosx/extended.m:526
+msgid ""
+"This panel allows on-the-fly selection of various video effects.\n"
+"These filters can be configured individually in the Preferences, in the "
+"subsections of Video/Filters.\n"
+"To choose the order in which the filter are applied, a filter option string "
+"can be set in the Preferences, Video / Filters section."
+msgstr ""
+"此面板将允许在数个视频效果之间飞速选择。\n"
+"这些滤镜可以在视频/滤镜中进行个别设置。\n"
+"要选择应用滤镜的顺序,可以在参数设置的视频/滤镜区域中设置一个滤镜选项字串。"
+
+#: modules/gui/macosx/fspanel.m:409
+msgid "(no item is being played)"
+msgstr "(没有被播放的项目)"
+
+#: modules/gui/macosx/intf.m:611 modules/gui/qt4/dialogs/messages.cpp:75
+#: modules/gui/qt4/dialogs/messages.cpp:95
+msgid "Messages"
+msgstr "消息"
+
+#: modules/gui/macosx/intf.m:612
+msgid "Open CrashLog..."
+msgstr "打开崩溃日志..."
+
+#: modules/gui/macosx/intf.m:613
+msgid "Save this Log..."
+msgstr "保存此记录..."
+
+#: modules/gui/macosx/intf.m:618
+msgid "Check for Update..."
+msgstr "检测更新..."
+
+#: modules/gui/macosx/intf.m:619
+msgid "Preferences..."
+msgstr "参数设置..."
+
+#: modules/gui/macosx/intf.m:622
+msgid "Services"
+msgstr "服务"
+
+#: modules/gui/macosx/intf.m:623
+msgid "Hide VLC"
+msgstr "隐藏 VLC"
+
+#: modules/gui/macosx/intf.m:624
+msgid "Hide Others"
+msgstr "隐藏其它"
+
+#: modules/gui/macosx/intf.m:625
+msgid "Show All"
+msgstr "全部显示"
+
+#: modules/gui/macosx/intf.m:626
+msgid "Quit VLC"
+msgstr "退出 VLC"
+
+#: modules/gui/macosx/intf.m:628
+msgid "1:File"
+msgstr "1:文件"
+
+#: modules/gui/macosx/intf.m:629 modules/gui/qt4/menus.cpp:317
+msgid "Advanced Open File..."
+msgstr "高级打开文件..."
+
+#: modules/gui/macosx/intf.m:631
+msgid "Open Disc..."
+msgstr "打开光盘..."
+
+#: modules/gui/macosx/intf.m:632
+msgid "Open Network..."
+msgstr "打开网络..."
+
+#: modules/gui/macosx/intf.m:633
+msgid "Open Capture Device..."
+msgstr "打开捕获设备..."
+
+#: modules/gui/macosx/intf.m:634
+msgid "Open Recent"
+msgstr "打开历史"
+
+#: modules/gui/macosx/intf.m:635 modules/gui/macosx/intf.m:2738
+msgid "Clear Menu"
+msgstr "清除菜单"
+
+#: modules/gui/macosx/intf.m:636
+msgid "Streaming/Exporting Wizard..."
+msgstr "流/导出向导..."
+
+#: modules/gui/macosx/intf.m:639
+msgid "Cut"
+msgstr "剪切"
+
+#: modules/gui/macosx/intf.m:640
+msgid "Copy"
+msgstr "复制"
+
+#: modules/gui/macosx/intf.m:641
+msgid "Paste"
+msgstr "粘帖"
+
+#: modules/gui/macosx/intf.m:643 modules/gui/macosx/playlist.m:467
+msgid "Select All"
+msgstr "全部选择"
+
+#: modules/gui/macosx/intf.m:645
+msgid "Playback"
+msgstr "播放"
+
+#: modules/gui/macosx/intf.m:668 modules/gui/qt4/menus.cpp:569
+msgid "Increase Volume"
+msgstr "增大音量"
+
+#: modules/gui/macosx/intf.m:669 modules/gui/qt4/menus.cpp:572
+msgid "Decrease Volume"
+msgstr "减小音量"
+
+#: modules/gui/macosx/intf.m:694 modules/gui/macosx/intf.m:695
+#: modules/gui/macosx/simple_prefs.m:291 modules/gui/macosx/vout.m:206
+msgid "Fullscreen Video Device"
+msgstr "全屏幕视频设备"
+
+#: modules/gui/macosx/intf.m:701 modules/gui/macosx/intf.m:702
+#: modules/video_filter/postproc.c:196
+msgid "Post processing"
+msgstr "预处理"
+
+#: modules/gui/macosx/intf.m:704
+msgid "Transparent"
+msgstr "透明度"
+
+#: modules/gui/macosx/intf.m:711
+msgid "Window"
+msgstr "窗口"
+
+#: modules/gui/macosx/intf.m:712
+msgid "Minimize Window"
+msgstr "最小化窗口"
+
+#: modules/gui/macosx/intf.m:713
+msgid "Close Window"
+msgstr "关闭窗口"
+
+#: modules/gui/macosx/intf.m:714
+msgid "Player..."
+msgstr "播放器..."
+
+#: modules/gui/macosx/intf.m:715
+msgid "Controller..."
+msgstr "控制器..."
+
+#: modules/gui/macosx/intf.m:716
+msgid "Equalizer..."
+msgstr "均衡器..."
+
+#: modules/gui/macosx/intf.m:717
+msgid "Extended Controls..."
+msgstr "扩展控制..."
+
+#: modules/gui/macosx/intf.m:718
+msgid "Bookmarks..."
+msgstr "书签..."
+
+#: modules/gui/macosx/intf.m:719
+msgid "Playlist..."
+msgstr "播放列表..."
+
+#: modules/gui/macosx/intf.m:720 modules/gui/macosx/playlist.m:468
+msgid "Media Information..."
+msgstr "媒体信息..."
+
+#: modules/gui/macosx/intf.m:721
+msgid "Messages..."
+msgstr "消息..."
+
+#: modules/gui/macosx/intf.m:722
+msgid "Errors and Warnings..."
+msgstr "错误和警告..."
+
+#: modules/gui/macosx/intf.m:724
+msgid "Bring All to Front"
+msgstr "全部窗口到最前"
+
+#: modules/gui/macosx/intf.m:726 modules/gui/qt4/dialogs/help.cpp:54
+#: modules/gui/qt4/menus.cpp:882
+msgid "Help"
+msgstr "帮助"
+
+#: modules/gui/macosx/intf.m:727
+msgid "VLC media player Help..."
+msgstr "VLC media player 帮助..."
+
+#: modules/gui/macosx/intf.m:728
+msgid "ReadMe / FAQ..."
+msgstr "读我 / 常见问题..."
+
+#: modules/gui/macosx/intf.m:730
+msgid "Online Documentation..."
+msgstr "在线文档..."
+
+#: modules/gui/macosx/intf.m:731
+msgid "VideoLAN Website..."
+msgstr "VideoLAN 网站..."
+
+#: modules/gui/macosx/intf.m:732
+msgid "Make a donation..."
+msgstr "捐献..."
+
+#: modules/gui/macosx/intf.m:733
+msgid "Online Forum..."
+msgstr "在线论坛..."
+
+#: modules/gui/macosx/intf.m:747
+msgid "Volume Up"
+msgstr "加大音量"
+
+#: modules/gui/macosx/intf.m:748
+msgid "Volume Down"
+msgstr "减小音量"
+
+#: modules/gui/macosx/intf.m:754
+msgid "Send"
+msgstr "发送"
+
+#: modules/gui/macosx/intf.m:755
+msgid "Don't Send"
+msgstr "不发送"
+
+#: modules/gui/macosx/intf.m:756 modules/gui/macosx/intf.m:757
+msgid "VLC crashed previously"
+msgstr "VLC 上次崩溃了"
+
+#: modules/gui/macosx/intf.m:758
+msgid ""
+"Do you want to send details on the crash to VLC's development team?\n"
+"\n"
+"If you want, you can enter a few lines on what you did before VLC crashed "
+"along with other helpful information: a link to download a sample file, a "
+"URL of a network stream, ..."
+msgstr ""
+"您是否愿意发送详细的崩溃信息给 VLC 的开发小组?\n"
+"\n"
+"如果您愿意,您可以输入几行文字,描述您在 VLC 崩溃之前做了什么,并附上其它有用"
+"的信息,如: 下载样本文件的链接、网络流的 URL ..."
+
+#: modules/gui/macosx/intf.m:759
+msgid "I agree to be possibly contacted about this bugreport."
+msgstr "我同意发送此错误报告。"
+
+#: modules/gui/macosx/intf.m:760
+msgid ""
+"Only your default E-Mail address will be submitted, including no further "
+"information."
+msgstr "仅会提交您的默认电子邮件地址,不会包含更多的信息。"
+
+#: modules/gui/macosx/intf.m:1835
+#, c-format
+msgid "Volume: %d%%"
+msgstr "音量: %d%%"
+
+#: modules/gui/macosx/intf.m:2329
+msgid "Error when sending the Crash Report"
+msgstr "在发送崩溃报告时发生错误"
+
+#: modules/gui/macosx/intf.m:2420
+msgid "No CrashLog found"
+msgstr "找不到崩溃日志"
+
+#: modules/gui/macosx/intf.m:2420 modules/gui/macosx/prefs.m:226
+#: modules/gui/macosx/simple_prefs.m:696
+msgid "Continue"
+msgstr "继续"
+
+#: modules/gui/macosx/intf.m:2420
+msgid "Couldn't find any trace of a previous crash."
+msgstr "找不到任何上次崩溃的痕迹。"
+
+#: modules/gui/macosx/intf.m:2447
+msgid "Remove old preferences?"
+msgstr "要移除旧的参数吗?"
+
+#: modules/gui/macosx/intf.m:2448
+msgid "We just found an older version of VLC's preferences files."
+msgstr "我们发现了一个旧版本的 VLC 参数文件。"
+
+#: modules/gui/macosx/intf.m:2449
+msgid "Move To Trash and Relaunch VLC"
+msgstr "移动到回收站并重新启动 VLC"
+
+#: modules/gui/macosx/intf.m:2583
+#, c-format
+msgid "VLC Debug Log (%s).rtfd"
+msgstr "VLC 调试记录 (%s).rtfd"
+
+#: modules/gui/macosx/macosx.m:53
+msgid "Video device"
+msgstr "视频设备"
+
+#: modules/gui/macosx/macosx.m:54
+msgid ""
+"Number of the screen to use by default to display videos in 'fullscreen'. "
+"The screen number correspondance can be found in the video device selection "
+"menu."
+msgstr ""
+"在 '全屏幕' 中用于显示默认视频的屏幕数量。屏幕数量可以在视频设备中被找到。"
+
+#: modules/gui/macosx/macosx.m:59
+msgid ""
+"Set the transparency of the video output. 1 is non-transparent (default) 0 "
+"is fully transparent."
+msgstr "设置视频输出的透明度。1 是非透明 (默认) 0 是完全透明。"
+
+#: modules/gui/macosx/macosx.m:62
+msgid "Stretch video to fill window"
+msgstr "拉伸视频填充窗口"
+
+#: modules/gui/macosx/macosx.m:63
+msgid ""
+"Stretch the video to fill the entire window when resizing the video instead "
+"of keeping the aspect ratio and displaying black borders."
+msgstr "在调整视频大小时拉伸视频填充整个窗口代替保持高宽比并显示黑框。"
+
+#: modules/gui/macosx/macosx.m:67
+msgid "Black screens in fullscreen"
+msgstr "全屏幕中的黑屏"
+
+#: modules/gui/macosx/macosx.m:68
+msgid "In fullscreen mode, keep screen where there is no video displayed black"
+msgstr "在全屏幕模式中保持没有显示视频的地方为黑色"
+
+#: modules/gui/macosx/macosx.m:71
+msgid "Use as Desktop Background"
+msgstr "用于桌面背景"
+
+#: modules/gui/macosx/macosx.m:72
+msgid ""
+"Use the video as the Desktop Background Desktop icons cannot be interacted "
+"with in this mode."
+msgstr "使用视频作为桌面背景,桌面图标在此模式中将不受影响。"
+
+#: modules/gui/macosx/macosx.m:75
+msgid "Show Fullscreen controller"
+msgstr "显示全屏控制器"
+
+#: modules/gui/macosx/macosx.m:76
+msgid "Shows a lucent controller when moving the mouse in fullscreen mode."
+msgstr "在全屏模式中移动鼠标时显示一个透明的控制器。"
+
+#: modules/gui/macosx/macosx.m:79
+msgid "Auto-playback of new items"
+msgstr "自动播放新项目"
+
+#: modules/gui/macosx/macosx.m:80
+msgid "Start playback of new items immediately once they were added."
+msgstr "在添加新项目后立即开始播放。"
+
+#: modules/gui/macosx/macosx.m:83
+msgid "Keep Recent Items"
+msgstr "保持最近使用的项目"
+
+#: modules/gui/macosx/macosx.m:84
+msgid ""
+"By default, VLC keeps a list of the last 10 items. This feature can be "
+"disabled here."
+msgstr "默认情况下,VLC 将保留最近使用的 10 个项目。该功能可以在此关闭。"
+
+#: modules/gui/macosx/macosx.m:87
+msgid "Keep current Equalizer settings"
+msgstr "保持当前的均衡器设置"
+
+#: modules/gui/macosx/macosx.m:88
+msgid ""
+"By default, VLC keeps the last equalizer settings before termination. This "
+"feature can be disabled here."
+msgstr ""
+"默认情况下,VLC 将会在被关闭前保持最后的均衡器设置。该功能可以在此关闭。"
+
+#: modules/gui/macosx/macosx.m:91 modules/gui/macosx/simple_prefs.m:271
+msgid "Control playback with the Apple Remote"
+msgstr "使用 Apple Remote 控制回放"
+
+#: modules/gui/macosx/macosx.m:92
+msgid "By default, VLC can be remotely controlled with the Apple Remote."
+msgstr "默认情况下,VLC 可以使用 Apple Remote 远程操控。"
+
+#: modules/gui/macosx/macosx.m:94 modules/gui/macosx/simple_prefs.m:272
+msgid "Control playback with media keys"
+msgstr "使用媒体键控制回放"
+
+#: modules/gui/macosx/macosx.m:95
+msgid ""
+"By default, VLC can be controlled using the media keys on modern Apple "
+"keyboards."
+msgstr "默认情况下,VLC 可以使用现代 Apple 键盘的媒体按键操控。"
+
+#: modules/gui/macosx/macosx.m:98
+msgid "Use media key control when VLC is in background"
+msgstr "当 VLC 在后台运行时使用媒体键操控"
+
+#: modules/gui/macosx/macosx.m:99
+msgid ""
+"By default, VLC will accept media key events also when being in background."
+msgstr "默认情况下,VLC 在后台运行时也接受媒体键击键事件。"
+
+#: modules/gui/macosx/macosx.m:103
+msgid "Mac OS X interface"
+msgstr "Mac OS X 界面"
+
+#: modules/gui/macosx/open.m:51
+msgid "No device connected"
+msgstr "没有连接设备"
+
+#: modules/gui/macosx/open.m:52
+msgid ""
+"VLC could not detect any EyeTV compatible device.\n"
+"\n"
+"Check the device's connection, make sure that the latest EyeTV software is "
+"installed and try again."
+msgstr ""
+"VLC 检测不到任何 EyrTV 兼容设备。\n"
+"\n"
+"请检查设备连接,并确认已经安装了最新的 EyeTV 软件,然后再试。"
+
+#: modules/gui/macosx/open.m:172
+msgid "Open Source"
+msgstr "打开源"
+
+#: modules/gui/macosx/open.m:173
+msgid "Media Resource Locator (MRL)"
+msgstr "媒体资源定位器 (MRL)"
+
+#: modules/gui/macosx/open.m:175 modules/gui/macosx/open.m:207
+#: modules/gui/macosx/open.m:588 modules/gui/macosx/open.m:779
+#: modules/gui/macosx/open.m:954 modules/gui/macosx/open.m:1190
+#: modules/gui/qt4/components/controller.hpp:104
+msgid "Open"
+msgstr "打开"
+
+#: modules/gui/macosx/open.m:181 modules/gui/macosx/open.m:424
+#: modules/gui/macosx/open.m:463
+msgid "Capture"
+msgstr "捕获"
+
+#: modules/gui/macosx/open.m:183 modules/gui/macosx/open.m:192
+#: modules/gui/macosx/open.m:308 modules/gui/macosx/output.m:145
+#: modules/gui/macosx/prefs_widgets.m:1181
+#: modules/gui/macosx/simple_prefs.m:299
+#: modules/gui/qt4/components/preferences_widgets.cpp:299
+#: modules/gui/qt4/components/simple_preferences.cpp:276
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:102
+msgid "Browse..."
+msgstr "浏览..."
+
+#: modules/gui/macosx/open.m:184
+msgid "Treat as a pipe rather than as a file"
+msgstr "目标传输代替作为一个文件"
+
+#: modules/gui/macosx/open.m:185
+msgid "Play another media synchronously"
+msgstr "同时播放一个其它的媒体"
+
+#: modules/gui/macosx/open.m:186 modules/gui/macosx/simple_prefs.m:280
+#: modules/gui/macosx/wizard.m:346 modules/gui/macosx/wizard.m:414
+msgid "Choose..."
+msgstr "选择..."
+
+#: modules/gui/macosx/open.m:189
+#: modules/gui/qt4/components/open_panels.cpp:872
+msgid "Device name"
+msgstr "设备名称"
+
+#: modules/gui/macosx/open.m:193
+msgid "No DVD menus"
+msgstr "无 DVD 菜单"
+
+#: modules/gui/macosx/open.m:195 modules/gui/macosx/open.m:626
+msgid "VIDEO_TS folder"
+msgstr "VIDEO_TS 文件夹"
+
+#: modules/gui/macosx/open.m:196 modules/gui/macosx/open.m:739
+#: modules/services_discovery/udev.c:587
+msgid "DVD"
+msgstr "DVD"
+
+#: modules/gui/macosx/open.m:201
+msgid "IP Address"
+msgstr "IP 地址"
+
+#: modules/gui/macosx/open.m:204
+msgid ""
+"To Open a usual network stream (HTTP, RTSP, RTMP, MMS, FTP, etc.), just "
+"enter the URL in the field above. If you want to open a RTP or UDP stream, "
+"press the button below."
+msgstr ""
+"要打开一个常用的网络串流(HTTP, RTSP, RTMP, MMS, FTP 等等),仅需在上面的框中输"
+"入 URL。如要打开一个 RTP 或 UDP 串流,请点击下面的按钮。"
+
+#: modules/gui/macosx/open.m:205
+msgid ""
+"If you want to open a multicast stream, enter the respective IP address "
+"given by the stream provider. In unicast mode, VLC will use your machine's "
+"IP automatically.\n"
+"\n"
+"To open a stream using a different protocol, just press Cancel to close this "
+"sheet."
+msgstr ""
+"如果您想打开一个多播串流,请输入串流供应者提供的 IP 地址。在单播模式,VLC 将"
+"自动使用本机的 IP 地址。\n"
+"\n"
+"要使用一个不同的协议打开串流,请点击取消。"
+
+#: modules/gui/macosx/open.m:208
+msgid "Open RTP/UDP Stream"
+msgstr "打开 RTP/UDP 串流"
+
+#: modules/gui/macosx/open.m:210
+msgid "Protocol"
+msgstr "协议"
+
+#: modules/gui/macosx/open.m:211 modules/gui/macosx/output.m:146
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:214
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:309
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:356
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:403
+msgid "Address"
+msgstr "地址"
+
+#: modules/gui/macosx/open.m:213 modules/gui/macosx/open.m:849
+#: modules/gui/macosx/open.m:907
+msgid "Unicast"
+msgstr "单播"
+
+#: modules/gui/macosx/open.m:214 modules/gui/macosx/open.m:864
+#: modules/gui/macosx/open.m:922
+msgid "Multicast"
+msgstr "多播"
+
+#: modules/gui/macosx/open.m:225
+msgid "Screen Capture Input"
+msgstr "屏幕捕获输入"
+
+#: modules/gui/macosx/open.m:226
+msgid "This facility allows you to process your screen's output."
+msgstr "此功能允许您处理您的屏幕输出。"
+
+#: modules/gui/macosx/open.m:227
+msgid "Frames per Second:"
+msgstr "帧每秒:"
+
+#: modules/gui/macosx/open.m:228
+msgid "Subscreen left:"
+msgstr "子屏幕最左位置:"
+
+#: modules/gui/macosx/open.m:229
+msgid "Subscreen top:"
+msgstr "子屏幕最上位置:"
+
+#: modules/gui/macosx/open.m:230
+msgid "Subscreen width:"
+msgstr "子屏幕宽度:"
+
+#: modules/gui/macosx/open.m:231
+msgid "Subscreen height:"
+msgstr "子屏幕高度:"
+
+#: modules/gui/macosx/open.m:233
+msgid "Current channel:"
+msgstr "当前的频道:"
+
+#: modules/gui/macosx/open.m:234
+msgid "Previous Channel"
+msgstr "上一个频道"
+
+#: modules/gui/macosx/open.m:235
+msgid "Next Channel"
+msgstr "下一个频道"
+
+#: modules/gui/macosx/open.m:236 modules/gui/macosx/open.m:1124
+msgid "Retrieving Channel Info..."
+msgstr "正在检索频道信息..."
+
+#: modules/gui/macosx/open.m:237
+msgid "EyeTV is not launched"
+msgstr "EyeTV 未启动"
+
+#: modules/gui/macosx/open.m:238
+msgid ""
+"VLC could not connect to EyeTV.\n"
+"Make sure that you installed VLC's EyeTV plugin."
+msgstr ""
+"VLC 无法连接到 EyeTV。\n"
+"请确认您已经安装了 VLC 的 EyeTV 插件。"
+
+#: modules/gui/macosx/open.m:239
+msgid "Launch EyeTV now"
+msgstr "立即启动 EyeTV"
+
+#: modules/gui/macosx/open.m:240
+msgid "Download Plugin"
+msgstr "下载插件"
+
+#: modules/gui/macosx/open.m:306
+msgid "Load subtitles file:"
+msgstr "载入字幕文件:"
+
+#: modules/gui/macosx/open.m:307 modules/gui/macosx/output.m:137
+msgid "Settings..."
+msgstr "设置..."
+
+#: modules/gui/macosx/open.m:309
+msgid "Override parametters"
+msgstr "覆盖参数"
+
+#: modules/gui/macosx/open.m:312
+msgid "FPS"
+msgstr "FPS"
+
+#: modules/gui/macosx/open.m:314
+msgid "Subtitles encoding"
+msgstr "字幕编码"
+
+#: modules/gui/macosx/open.m:316
+msgid "Font size"
+msgstr "字体"
+
+#: modules/gui/macosx/open.m:318
+msgid "Subtitles alignment"
+msgstr "字幕排列"
+
+#: modules/gui/macosx/open.m:321
+msgid "Font Properties"
+msgstr "字体属性"
+
+#: modules/gui/macosx/open.m:322
+msgid "Subtitle File"
+msgstr "字幕文件"
+
+#: modules/gui/macosx/open.m:587 modules/gui/macosx/open.m:953
+#: modules/gui/macosx/open.m:1189
+msgid "Open File"
+msgstr "打开文件"
+
+#: modules/gui/macosx/open.m:674 modules/gui/macosx/open.m:726
+#: modules/gui/macosx/open.m:734 modules/gui/macosx/open.m:742
+msgid "No %@s found"
+msgstr "找不到 %@s"
+
+#: modules/gui/macosx/open.m:778
+msgid "Open VIDEO_TS Directory"
+msgstr "打开 VIDEO_TS 目录"
+
+#: modules/gui/macosx/open.m:1027
+msgid "iSight Capture Input"
+msgstr "iSight 捕获输入"
+
+#: modules/gui/macosx/open.m:1028
+msgid ""
+"This facility allows you to process your iSight's input signal.\n"
+"\n"
+"No settings are available in this version, so you will be provided a "
+"640px*480px raw video stream.\n"
+"\n"
+"Live Audio input is not supported."
+msgstr ""
+"此功能允许您处理您的 iSight 输入信号。\n"
+"\n"
+"在此版本中无可用的设置,所以您将被提供一个 640px*480px 的 raw 视频流。\n"
+"\n"
+"不支持实况音频输入。"
+
+#: modules/gui/macosx/open.m:1130
+msgid "Composite input"
+msgstr "混合输入"
+
+#: modules/gui/macosx/open.m:1133
+msgid "S-Video input"
+msgstr "S-Video 输入"
+
+#: modules/gui/macosx/output.m:136
+msgid "Streaming/Saving:"
+msgstr "流/保存:"
+
+#: modules/gui/macosx/output.m:140
+msgid "Streaming and Transcoding Options"
+msgstr "流与编码转换选项"
+
+#: modules/gui/macosx/output.m:141
+msgid "Display the stream locally"
+msgstr "显示本地流"
+
+#: modules/gui/macosx/output.m:143 modules/gui/macosx/output.m:251
+#: modules/gui/macosx/output.m:391
+msgid "Stream"
+msgstr "流"
+
+#: modules/gui/macosx/output.m:144 modules/gui/qt4/dialogs/convert.cpp:89
+msgid "Dump raw input"
+msgstr "转储 raw 输入"
+
+#: modules/gui/macosx/output.m:155
+msgid "Encapsulation Method"
+msgstr "封装模式"
+
+#: modules/gui/macosx/output.m:159
+msgid "Transcoding options"
+msgstr "转码选项"
+
+#: modules/gui/macosx/output.m:163 modules/gui/macosx/output.m:173
+#: modules/gui/macosx/wizard.m:384
+msgid "Bitrate (kb/s)"
+msgstr "位率 (kb/秒)"
+
+#: modules/gui/macosx/output.m:166
+msgid "Scale"
+msgstr "比例"
+
+#: modules/gui/macosx/output.m:180
+msgid "Stream Announcing"
+msgstr "流式广播"
+
+#: modules/gui/macosx/output.m:181
+msgid "SAP announce"
+msgstr "SAP 广播"
+
+#: modules/gui/macosx/output.m:182 modules/gui/macosx/output.m:635
+msgid "RTSP announce"
+msgstr "RTSP 广播"
+
+#: modules/gui/macosx/output.m:183 modules/gui/macosx/output.m:641
+msgid "HTTP announce"
+msgstr "HTTP 广播"
+
+#: modules/gui/macosx/output.m:184 modules/gui/macosx/output.m:647
+msgid "Export SDP as file"
+msgstr "导出 SDP 为文件"
+
+#: modules/gui/macosx/output.m:186
+msgid "Channel Name"
+msgstr "平道名称"
+
+#: modules/gui/macosx/output.m:187
+msgid "SDP URL"
+msgstr "SDP URL"
+
+#: modules/gui/macosx/output.m:525
+msgid "Save File"
+msgstr "保存文件"
+
+#: modules/gui/macosx/output.m:526 modules/gui/macosx/playlist.m:745
+#: modules/gui/macosx/prefs.m:203 modules/gui/macosx/simple_prefs.m:310
+#: modules/gui/qt4/components/sout/profile_selector.cpp:250
+msgid "Save"
+msgstr "保存"
+
+#: modules/gui/macosx/playlist.m:136 modules/gui/macosx/playlist.m:140
+#: modules/gui/macosx/wizard.m:350 modules/gui/qt4/dialogs/plugins.cpp:493
+#: modules/mux/asf.c:58
+msgid "Author"
+msgstr "作者"
+
+#: modules/gui/macosx/playlist.m:137 modules/gui/macosx/playlist.m:141
+#: modules/gui/macosx/wizard.m:352
+#: modules/gui/qt4/components/playlist/sorting.h:51
+msgid "Duration"
+msgstr "持续时间"
+
+#: modules/gui/macosx/playlist.m:463
+msgid "Save Playlist..."
+msgstr "保存播放列表..."
+
+#: modules/gui/macosx/playlist.m:465 modules/gui/qt4/dialogs/bookmarks.cpp:45
+msgid "Delete"
+msgstr "删除"
+
+#: modules/gui/macosx/playlist.m:466
+msgid "Expand Node"
+msgstr "展开节点"
+
+#: modules/gui/macosx/playlist.m:469
+msgid "Download Cover Art"
+msgstr "下载封面"
+
+#: modules/gui/macosx/playlist.m:470
+msgid "Fetch Meta Data"
+msgstr "获取源数据"
+
+#: modules/gui/macosx/playlist.m:471 modules/gui/macosx/playlist.m:472
+msgid "Reveal in Finder"
+msgstr "在 Finder 中显示"
+
+#: modules/gui/macosx/playlist.m:474
+msgid "Sort Node by Name"
+msgstr "按名称排序节点"
+
+#: modules/gui/macosx/playlist.m:475
+msgid "Sort Node by Author"
+msgstr "按作者排序节点"
+
+#: modules/gui/macosx/playlist.m:478 modules/gui/macosx/playlist.m:479
+#: modules/gui/macosx/playlist.m:537 modules/gui/macosx/playlist.m:538
+#: modules/gui/macosx/playlist.m:1553 modules/gui/macosx/playlist.m:1554
+msgid "No items in the playlist"
+msgstr "在播放列表中没有项目"
+
+#: modules/gui/macosx/playlist.m:481 modules/gui/macosx/playlist.m:482
+msgid "Search in Playlist"
+msgstr "在播放列表中搜索"
+
+#: modules/gui/macosx/playlist.m:483
+msgid "Add Folder to Playlist"
+msgstr "添加文件夹到播放列表"
+
+#: modules/gui/macosx/playlist.m:485
+msgid "File Format:"
+msgstr "文件格式:"
+
+#: modules/gui/macosx/playlist.m:486
+msgid "Extended M3U"
+msgstr "扩展 M3U"
+
+#: modules/gui/macosx/playlist.m:487
+msgid "XML Shareable Playlist Format (XSPF)"
+msgstr "XML 可分享播放列表格式 (XSPF)"
+
+#: modules/gui/macosx/playlist.m:488
+msgid "HTML Playlist"
+msgstr "HTML 播放列表"
+
+#: modules/gui/macosx/playlist.m:527 modules/gui/macosx/playlist.m:530
+#: modules/gui/macosx/playlist.m:1543 modules/gui/macosx/playlist.m:1546
+#: modules/gui/macosx/wizard.m:1365
+#, c-format
+msgid "%i items"
+msgstr "%i 个项目"
+
+#: modules/gui/macosx/playlist.m:542 modules/gui/macosx/playlist.m:543
+#: modules/gui/macosx/playlist.m:1558 modules/gui/macosx/playlist.m:1559
+msgid "1 item"
+msgstr "1 个项目"
+
+#: modules/gui/macosx/playlist.m:744
+msgid "Save Playlist"
+msgstr "保存播放列表"
+
+#: modules/gui/macosx/playlist.m:1283 modules/gui/ncurses.c:1737
+msgid "Meta-information"
+msgstr "源信息"
+
+#: modules/gui/macosx/playlist.m:1524
+msgid "Empty Folder"
+msgstr "空文件夹"
+
+#: modules/gui/macosx/playlistinfo.m:74
+#: modules/gui/qt4/dialogs/mediainfo.cpp:49
+msgid "Media Information"
+msgstr "媒体信息"
+
+#: modules/gui/macosx/playlistinfo.m:75
+msgid "Location"
+msgstr "位置"
+
+#: modules/gui/macosx/playlistinfo.m:78
+msgid "Save Metadata"
+msgstr "保存元数据"
+
+#: modules/gui/macosx/playlistinfo.m:80
+#: modules/visualization/visual/visual.c:114
+msgid "General"
+msgstr "常规"
+
+#: modules/gui/macosx/playlistinfo.m:81
+msgid "Codec Details"
+msgstr "编码详细信息"
+
+#: modules/gui/macosx/playlistinfo.m:98
+msgid "Read at media"
+msgstr "读取媒体"
+
+#: modules/gui/macosx/playlistinfo.m:99
+#: modules/gui/qt4/components/info_panels.cpp:514
+msgid "Input bitrate"
+msgstr "输入位率"
+
+#: modules/gui/macosx/playlistinfo.m:100
+msgid "Demuxed"
+msgstr "已去复用"
+
+#: modules/gui/macosx/playlistinfo.m:101
+msgid "Stream bitrate"
+msgstr "流位率"
+
+#: modules/gui/macosx/playlistinfo.m:104 modules/gui/macosx/playlistinfo.m:115
+msgid "Decoded blocks"
+msgstr "已解码的块"
+
+#: modules/gui/macosx/playlistinfo.m:105
+msgid "Displayed frames"
+msgstr "已显示的帧"
+
+#: modules/gui/macosx/playlistinfo.m:106
+msgid "Lost frames"
+msgstr "丢失的帧"
+
+#: modules/gui/macosx/playlistinfo.m:109 modules/gui/macosx/wizard.m:363
+#: modules/gui/qt4/dialogs_provider.cpp:627
+msgid "Streaming"
+msgstr "流"
+
+#: modules/gui/macosx/playlistinfo.m:110
+msgid "Sent packets"
+msgstr "发送数据包"
+
+#: modules/gui/macosx/playlistinfo.m:111
+msgid "Sent bytes"
+msgstr "发送字节"
+
+#: modules/gui/macosx/playlistinfo.m:112
+msgid "Send rate"
+msgstr "发送率"
+
+#: modules/gui/macosx/playlistinfo.m:116
+msgid "Played buffers"
+msgstr "已播放的缓冲"
+
+#: modules/gui/macosx/playlistinfo.m:117
+msgid "Lost buffers"
+msgstr "丢失的缓冲"
+
+#: modules/gui/macosx/playlistinfo.m:396
+msgid "Error while saving meta"
+msgstr "在保存元时发送错误"
+
+#: modules/gui/macosx/playlistinfo.m:397
+msgid "VLC was unable to save the meta data."
+msgstr "VLC 无法保存元数据。"
+
+#: modules/gui/macosx/prefs.m:202 modules/gui/macosx/simple_prefs.m:311
+#: modules/gui/qt4/dialogs/preferences.cpp:46
+msgid "Preferences"
+msgstr "参数设置"
+
+#: modules/gui/macosx/prefs.m:205 modules/gui/macosx/simple_prefs.m:309
+msgid "Reset All"
+msgstr "全部重置"
+
+#: modules/gui/macosx/prefs.m:206 modules/gui/macosx/simple_prefs.m:306
+msgid "Basic"
+msgstr "基础"
+
+#: modules/gui/macosx/prefs.m:225 modules/gui/macosx/simple_prefs.m:695
+#: modules/gui/qt4/dialogs/preferences.cpp:312
+msgid "Reset Preferences"
+msgstr "重置首选项"
+
+#: modules/gui/macosx/prefs.m:228 modules/gui/macosx/simple_prefs.m:698
+msgid ""
+"Beware this will reset the VLC media player preferences.\n"
+"Are you sure you want to continue?"
+msgstr ""
+"请小心重置 VLC media player 的首选项。\n"
+"您确实要继续吗?"
+
+#: modules/gui/macosx/prefs_widgets.m:1216
+msgid "Select a directory"
+msgstr "选择一个目录"
+
+#: modules/gui/macosx/prefs_widgets.m:1216
+msgid "Select a file"
+msgstr "选择一个文件"
+
+#: modules/gui/macosx/prefs_widgets.m:1217
+msgid "Select"
+msgstr "选择"
+
+#: modules/gui/macosx/simple_prefs.m:96
+msgid "Not Set"
+msgstr "未设置"
+
+#: modules/gui/macosx/simple_prefs.m:180
+#: modules/gui/qt4/components/simple_preferences.cpp:523
+msgid "Interface Settings"
+msgstr "界面设置"
+
+#: modules/gui/macosx/simple_prefs.m:184
+msgid "General Audio Settings"
+msgstr "常规音频设置"
+
+#: modules/gui/macosx/simple_prefs.m:188
+msgid "General Video Settings"
+msgstr "常规视频设置"
+
+#: modules/gui/macosx/simple_prefs.m:192
+msgid "Subtitles & OSD"
+msgstr "字幕与 OSD"
+
+#: modules/gui/macosx/simple_prefs.m:192
+#: modules/gui/qt4/components/simple_preferences.cpp:623
+msgid "Subtitles & On Screen Display Settings"
+msgstr "字幕与屏幕显示设置"
+
+#: modules/gui/macosx/simple_prefs.m:196
+msgid "Input & Codecs"
+msgstr "输入与编解码器"
+
+#: modules/gui/macosx/simple_prefs.m:196
+msgid "Input & Codec settings"
+msgstr "输入与编解码器设置"
+
+#: modules/gui/macosx/simple_prefs.m:228
+msgid "Effects"
+msgstr "效果"
+
+#: modules/gui/macosx/simple_prefs.m:229
+msgid "Enable Audio"
+msgstr "开启音频"
+
+#: modules/gui/macosx/simple_prefs.m:230
+msgid "General Audio"
+msgstr "常规音频"
+
+#: modules/gui/macosx/simple_prefs.m:231
+msgid "Headphone surround effect"
+msgstr "耳机环绕声效果"
+
+#: modules/gui/macosx/simple_prefs.m:232
+msgid "Preferred Audio language"
+msgstr "首选的音频语言"
+
+#: modules/gui/macosx/simple_prefs.m:233
+msgid "Enable Last.fm submissions"
+msgstr "开启 Last.fm 提价"
+
+#: modules/gui/macosx/simple_prefs.m:238
+msgid "Visualization"
+msgstr "可视化"
+
+#: modules/gui/macosx/simple_prefs.m:239
+msgid "Default Volume"
+msgstr "默认音量"
+
+#: modules/gui/macosx/simple_prefs.m:242
+msgid "Change"
+msgstr "更改"
+
+#: modules/gui/macosx/simple_prefs.m:243
+msgid "Change Hotkey"
+msgstr "更改热键"
+
+#: modules/gui/macosx/simple_prefs.m:247
+msgid "Select an action to change the associated hotkey:"
+msgstr "选择一个要被更改的已分配热键:"
+
+#: modules/gui/macosx/simple_prefs.m:248
+#: modules/gui/qt4/components/preferences_widgets.cpp:1197
+msgid "Action"
+msgstr "操作"
+
+#: modules/gui/macosx/simple_prefs.m:249
+msgid "Shortcut"
+msgstr "快捷方式"
+
+#: modules/gui/macosx/simple_prefs.m:252
+msgid "Repair AVI Files"
+msgstr "修复 AVI 文件"
+
+#: modules/gui/macosx/simple_prefs.m:253
+msgid "Default Caching Level"
+msgstr "默认缓冲等级"
+
+#: modules/gui/macosx/simple_prefs.m:254
+msgid "Caching"
+msgstr "正在缓冲"
+
+#: modules/gui/macosx/simple_prefs.m:255
+msgid ""
+"Use the complete preferences to configure custom caching values for each "
+"access module."
+msgstr "为每个访问模式使用完整的参数设置自定义的缓冲值。"
+
+#: modules/gui/macosx/simple_prefs.m:256
+msgid "HTTP Proxy"
+msgstr "HTTP 代理"
+
+#: modules/gui/macosx/simple_prefs.m:257
+msgid "Password for HTTP Proxy"
+msgstr "HTTP 代理密码"
+
+#: modules/gui/macosx/simple_prefs.m:258
+msgid "Codecs / Muxers"
+msgstr "编解码器 / 多路复用器"
+
+#: modules/gui/macosx/simple_prefs.m:260
+msgid "Post-Processing Quality"
+msgstr "预处理质量"
+
+#: modules/gui/macosx/simple_prefs.m:263
+msgid "Default Server Port"
+msgstr "默认服务器端口"
+
+#: modules/gui/macosx/simple_prefs.m:266
+msgid "Album art download policy"
+msgstr "专辑封面下载策略"
+
+#: modules/gui/macosx/simple_prefs.m:267
+msgid "Add controls to the video window"
+msgstr "添加控制到视频窗口"
+
+#: modules/gui/macosx/simple_prefs.m:268
+msgid "Show Fullscreen Controller"
+msgstr "显示全屏幕控制器"
+
+#: modules/gui/macosx/simple_prefs.m:270
+msgid "Privacy / Network Interaction"
+msgstr "隐私 / 网络交互"
+
+#: modules/gui/macosx/simple_prefs.m:273
+msgid "...when VLC is in background"
+msgstr "...VLC 在后台运行时"
+
+#: modules/gui/macosx/simple_prefs.m:274
+msgid "Automatically check for updates"
+msgstr "自动检测更新"
+
+#: modules/gui/macosx/simple_prefs.m:278
+msgid "Default Encoding"
+msgstr "默认编码"
+
+#: modules/gui/macosx/simple_prefs.m:279
+msgid "Display Settings"
+msgstr "显示设置"
+
+#: modules/gui/macosx/simple_prefs.m:281
+msgid "Font Color"
+msgstr "字体颜色"
+
+#: modules/gui/macosx/simple_prefs.m:282
+msgid "Font Size"
+msgstr "字体大小"
+
+#: modules/gui/macosx/simple_prefs.m:284
+msgid "Subtitle Languages"
+msgstr "字幕语言"
+
+#: modules/gui/macosx/simple_prefs.m:285
+msgid "Preferred Subtitle Language"
+msgstr "首选的字幕语言"
+
+#: modules/gui/macosx/simple_prefs.m:287
+msgid "Enable OSD"
+msgstr "开启 OSD"
+
+#: modules/gui/macosx/simple_prefs.m:290
+msgid "Black screens in Fullscreen mode"
+msgstr "全屏幕模式中的黑屏"
+
+#: modules/gui/macosx/simple_prefs.m:292 modules/stream_out/display.c:54
+msgid "Display"
+msgstr "显示"
+
+#: modules/gui/macosx/simple_prefs.m:293
+msgid "Enable Video"
+msgstr "开启视频"
+
+#: modules/gui/macosx/simple_prefs.m:296
+msgid "Output module"
+msgstr "输出模式"
+
+#: modules/gui/macosx/simple_prefs.m:298
+msgid "Video snapshots"
+msgstr "显示截图"
+
+#: modules/gui/macosx/simple_prefs.m:300 modules/meta_engine/folder.c:66
+msgid "Folder"
+msgstr "文件夹"
+
+#: modules/gui/macosx/simple_prefs.m:301
+msgid "Format"
+msgstr "格式"
+
+#: modules/gui/macosx/simple_prefs.m:302
+msgid "Prefix"
+msgstr "前缀"
+
+#: modules/gui/macosx/simple_prefs.m:303
+msgid "Sequential numbering"
+msgstr "顺序编码"
+
+#: modules/gui/macosx/simple_prefs.m:466
+msgid "Last check on: %@"
+msgstr "上次检查于: %@"
+
+#: modules/gui/macosx/simple_prefs.m:468
+msgid "No check was performed yet."
+msgstr "尚未执行检查。"
+
+#: modules/gui/macosx/simple_prefs.m:572 modules/gui/macosx/simple_prefs.m:615
+#: modules/gui/macosx/simple_prefs.m:1222
+#: modules/gui/qt4/components/simple_preferences.cpp:467
+msgid "Custom"
+msgstr "自定义"
+
+#: modules/gui/macosx/simple_prefs.m:572
+#: modules/gui/qt4/components/simple_preferences.cpp:468
+msgid "Lowest latency"
+msgstr "最低潜伏时间"
+
+#: modules/gui/macosx/simple_prefs.m:572
+#: modules/gui/qt4/components/simple_preferences.cpp:469
+msgid "Low latency"
+msgstr "低潜伏"
+
+#: modules/gui/macosx/simple_prefs.m:572
+#: modules/gui/qt4/components/simple_preferences.cpp:470
+#: modules/misc/freetype.c:120 modules/misc/quartztext.c:104
+#: modules/misc/win32text.c:81
+msgid "Normal"
+msgstr "普通"
+
+#: modules/gui/macosx/simple_prefs.m:573
+#: modules/gui/qt4/components/simple_preferences.cpp:471
+msgid "High latency"
+msgstr "高潜伏时间"
+
+#: modules/gui/macosx/simple_prefs.m:573
+#: modules/gui/qt4/components/simple_preferences.cpp:472
+msgid "Higher latency"
+msgstr "较高潜伏时间"
+
+#: modules/gui/macosx/simple_prefs.m:814
+msgid "Interface Settings not saved"
+msgstr "界面设置未被保存"
+
+#: modules/gui/macosx/simple_prefs.m:815 modules/gui/macosx/simple_prefs.m:889
+#: modules/gui/macosx/simple_prefs.m:922 modules/gui/macosx/simple_prefs.m:987
+#: modules/gui/macosx/simple_prefs.m:1027
+#: modules/gui/macosx/simple_prefs.m:1052
+#, c-format
+msgid "An error occured while saving your settings via SimplePrefs (%i)."
+msgstr "在通过 SimplePrefs (%i) 保存您的设置时发生一个错误。"
+
+#: modules/gui/macosx/simple_prefs.m:888
+msgid "Audio Settings not saved"
+msgstr "未保存音频设置"
+
+#: modules/gui/macosx/simple_prefs.m:921
+msgid "Video Settings not saved"
+msgstr "未保存视频设置"
+
+#: modules/gui/macosx/simple_prefs.m:986
+msgid "Input Settings not saved"
+msgstr "未保存输入设置"
+
+#: modules/gui/macosx/simple_prefs.m:1026
+msgid "On Screen Display/Subtitle Settings not saved"
+msgstr "屏幕显示/字幕设置不保存"
+
+#: modules/gui/macosx/simple_prefs.m:1051
+msgid "Hotkeys not saved"
+msgstr "热键未保存"
+
+#: modules/gui/macosx/simple_prefs.m:1152
+msgid "Choose the folder to save your video snapshots to."
+msgstr "选择您的视频截图要保存的文件夹。"
+
+#: modules/gui/macosx/simple_prefs.m:1154
+msgid "Choose"
+msgstr "选择"
+
+#: modules/gui/macosx/simple_prefs.m:1240
+msgid ""
+"Press new keys for\n"
+"\"%@\""
+msgstr ""
+"请为下述功能按新键\n"
+"\"%@\""
+
+#: modules/gui/macosx/simple_prefs.m:1314
+msgid "Invalid combination"
+msgstr "无效的组合"
+
+#: modules/gui/macosx/simple_prefs.m:1315
+msgid "Regrettably, these keys cannot be assigned as hotkey shortcuts."
+msgstr "很遗憾,这些按键无法被分配为热键快捷方式。"
+
+#: modules/gui/macosx/simple_prefs.m:1333
+msgid "This combination is already taken by \"%@\"."
+msgstr "此组合已经被 \"%@\" 使用。"
+
+#: modules/gui/macosx/wizard.m:113
+msgid "MPEG-1 Video codec (usable with MPEG PS, MPEG TS, MPEG1, OGG and RAW)"
+msgstr "MPEG-1 视频编解码器 (用于 MPEG PS, MPEG TS, MPEG1, OGG 和 RAW)"
+
+#: modules/gui/macosx/wizard.m:117
+msgid "MPEG-2 Video codec (usable with MPEG PS, MPEG TS, MPEG1, OGG and RAW)"
+msgstr "MPEG-2 视频编解码器 (用于 MPEG PS, MPEG TS, MPEG1, OGG 和 RAW)"
+
+#: modules/gui/macosx/wizard.m:121
+msgid ""
+"MPEG-4 Video codec (useable with MPEG PS, MPEG TS, MPEG1, ASF, MP4, OGG and "
+"RAW)"
+msgstr ""
+"MPEG-4 视频编解码器 (用于 MPEG PS, MPEG TS, MPEG1, ASF, MP4, OGG 和 RAW)"
+
+#: modules/gui/macosx/wizard.m:125
+msgid "DivX first version (useable with MPEG TS, MPEG1, ASF and OGG)"
+msgstr "DivX 第一版 (用于 MPEG TS, MPEG1, ASF 和 OGG)"
+
+#: modules/gui/macosx/wizard.m:129
+msgid "DivX second version (useable with MPEG TS, MPEG1, ASF and OGG)"
+msgstr "DivX 第二版 (用于 MPEG TS, MPEG1, ASF 和 OGG)"
+
+#: modules/gui/macosx/wizard.m:133
+msgid "DivX third version (useable with MPEG TS, MPEG1, ASF and OGG)"
+msgstr "DivX 第三版 (用于 MPEG TS, MPEG1, ASF 和 OGG)"
+
+#: modules/gui/macosx/wizard.m:137
+msgid ""
+"H263 is a video codec optimized for videoconference (low rates, useable with "
+"MPEG TS)"
+msgstr "H263 是一个为视频会议优化的编解码器 (低位率, 用于 MPEG TS)"
+
+#: modules/gui/macosx/wizard.m:141
+msgid "H264 is a new video codec (useable with MPEG TS and MP4)"
+msgstr "H264 是一个新的视频编解码器 (用于 MPEG TS 和 MP4)"
+
+#: modules/gui/macosx/wizard.m:145
+msgid "WMV (Windows Media Video) 1 (useable with MPEG TS, MPEG1, ASF and OGG)"
+msgstr "WMV (Windows Media 视频) 1 (用于 MPEG TS, MPEG1, ASF 和 OGG)"
+
+#: modules/gui/macosx/wizard.m:149
+msgid "WMV (Windows Media Video) 2 (useable with MPEG TS, MPEG1, ASF and OGG)"
+msgstr "WMV (Windows Media 视频) 2 (用于 MPEG TS, MPEG1, ASF 和 OGG)"
+
+#: modules/gui/macosx/wizard.m:153
+msgid ""
+"MJPEG consists of a series of JPEG pictures (useable with MPEG TS, MPEG1, "
+"ASF and OGG)"
+msgstr "由一系列 JPEG 图像组成的 MJPEG (用于 MPEG TS, MPEG1, ASF 和 OGG)"
+
+#: modules/gui/macosx/wizard.m:157
+msgid "Theora is a free general-purpose codec (useable with MPEG TS and OGG)"
+msgstr "Theora 是一个自由的多用途编解码器 (用于 MPEG TS 和 OGG)"
+
+#: modules/gui/macosx/wizard.m:161 modules/gui/macosx/wizard.m:212
+msgid "Dummy codec (do not transcode, useable with all encapsulation formats)"
+msgstr "空编解码 (不转码, 可用于所有封装格式)"
+
+#: modules/gui/macosx/wizard.m:180
+msgid ""
+"The standard MPEG audio (1/2) format (useable with MPEG PS, MPEG TS, MPEG1, "
+"ASF, OGG and RAW)"
+msgstr ""
+"标准 MPEG 音频 (1/2) 格式 (用于 MPEG PS, MPEG TS, MPEG1, ASF, OGG 和 RAW)"
+
+#: modules/gui/macosx/wizard.m:184
+msgid ""
+"MPEG Audio Layer 3 (useable with MPEG PS, MPEG TS, MPEG1, ASF, OGG and RAW)"
+msgstr "MPEG 音频层次 3 (用于 MPEG PS, MPEG TS, MPEG1, ASF, OGG 和 RAW)"
+
+#: modules/gui/macosx/wizard.m:188
+msgid "Audio format for MPEG4 (useable with MPEG TS and MPEG4)"
+msgstr "MPEG4 音频格式 (用于 MPEG TS 和 MPEG4)"
+
+#: modules/gui/macosx/wizard.m:191
+msgid ""
+"DVD audio format (useable with MPEG PS, MPEG TS, MPEG1, ASF, OGG and RAW)"
+msgstr "DVD 音频格式 (用于 MPEG PS, MPEG TS, MPEG1, ASF, OGG 和 RAW)"
+
+#: modules/gui/macosx/wizard.m:195
+msgid "Vorbis is a free audio codec (useable with OGG)"
+msgstr "Vorbis 是一个自由的音频编解码器 (用于 OGG)"
+
+#: modules/gui/macosx/wizard.m:198
+msgid "FLAC is a lossless audio codec (useable with OGG and RAW)"
+msgstr "FLAC 是一个无损音频编解码器 (用于 OGG 和 RAW)"
+
+#: modules/gui/macosx/wizard.m:202
+msgid "A free audio codec dedicated to compression of voice (useable with OGG)"
+msgstr "一个用于压缩语音的免费音频编解码器 (用于 OGG)"
+
+#: modules/gui/macosx/wizard.m:206 modules/gui/macosx/wizard.m:209
+msgid "Uncompressed audio samples (useable with WAV)"
+msgstr "未压缩音频采样 (用于 WAV)"
+
+#: modules/gui/macosx/wizard.m:234
+msgid "MPEG Program Stream"
+msgstr "MPEG 程序流"
+
+#: modules/gui/macosx/wizard.m:236
+msgid "MPEG Transport Stream"
+msgstr "MPEG 传输流"
+
+#: modules/gui/macosx/wizard.m:238
+msgid "MPEG 1 Format"
+msgstr "MPEG 1 格式"
+
+#: modules/gui/macosx/wizard.m:257
+msgid ""
+"Enter the local addresses you want to listen requests on. Do not enter "
+"anything if you want to listen on all the network interfaces. This is "
+"generally the best thing to do. Other computers can then access the stream "
+"at http://yourip:8080 by default."
+msgstr ""
+"请输入您要请求打开监听的本地地址。如果您希望监听整个网络界面请不要输入任何东"
+"西。这通常是最佳的做法。其它计算机在默认情况下可以通过 http://您的 ip:8080 访"
+"问流。"
+
+#: modules/gui/macosx/wizard.m:261
+msgid ""
+"Use this to stream to several computers. This method is not the most "
+"efficient, as the server needs to send the stream several times, but "
+"generally the most compatible"
+msgstr ""
+"使用此将流传送至多台计算机。此模式不是最有效的,作为服务器需要许多时间才能发"
+"送流,但是它却有最佳的兼容性"
+
+#: modules/gui/macosx/wizard.m:264
+msgid ""
+"Enter the local addresses you want to listen requests on. Do not enter "
+"anything if you want to listen on all the network interfaces. This is "
+"generally the best thing to do. Other computers can then access the stream "
+"at mms://yourip:8080 by default."
+msgstr ""
+"请输入您要请求打开监听的本地地址。如果您希望监听整个网络界面请不要输入任何东"
+"西。这通常是最佳的做法。其它计算机在默认情况下可以通过 mms://您的 ip:8080 访"
+"问流。"
+
+#: modules/gui/macosx/wizard.m:268
+msgid ""
+"Use this to stream to several computers using the Microsoft MMS protocol. "
+"This protocol is used as transport method by many Microsoft's softwares. "
+"Note that only a small part of the MMS protocol is supported (MMS "
+"encapsulated in HTTP)."
+msgstr ""
+"使用此选项通过 Microsoft MMS 协议将流发布至多个计算机。此协议被用作许多 "
+"Microsoft 软件的传输方式。主机仅支持很小一部分的 MMS 协议 (嵌入 HTTP 的 "
+"MMS)。"
+
+#: modules/gui/macosx/wizard.m:273 modules/gui/macosx/wizard.m:283
+msgid "Enter the address of the computer to stream to."
+msgstr "请输入计算机要发布流的地址。"
+
+#: modules/gui/macosx/wizard.m:274 modules/gui/macosx/wizard.m:372
+msgid "Use this to stream to a single computer."
+msgstr "使用此选项将流发布到单一的计算机上。"
+
+#: modules/gui/macosx/wizard.m:276 modules/gui/macosx/wizard.m:286
+msgid ""
+"Enter the multicast address to stream to in this field. This must be an IP "
+"address between 224.0.0.0 and 239.255.255.255. For a private use, enter an "
+"address beginning with 239.255."
+msgstr ""
+"请在此区域输入要将流发送的多播地址。这必须是一个在 224.0.0.0 到 "
+"239.255.255.255 之间的 IP 地址。要用于私人用途请输入一个从 239.225. 开始的地"
+"址。"
+
+#: modules/gui/macosx/wizard.m:279
+msgid ""
+"Use this to stream to a dynamic group of computers on a multicast-enabled "
+"network. This is the most efficient method to stream to several computers, "
+"but it won't work over the Internet."
+msgstr ""
+"使用此选项将流发送至在开启多播网络上的动态组计算机。这是一种最有效的将流发送"
+"到多台计算机的模式,但是它不能通过 Internet 工作。"
+
+#: modules/gui/macosx/wizard.m:284
+msgid ""
+"Use this to stream to a single computer. RTP headers will be added to the "
+"stream"
+msgstr "使用此流发送到一个单一的计算机。RTP 头部将被加到流中"
+
+#: modules/gui/macosx/wizard.m:289
+msgid ""
+"Use this to stream to a dynamic group of computers on a multicast-enabled "
+"network. This is the most efficient method to stream to several computers, "
+"but it won't work over Internet. RTP headers will be added to the stream"
+msgstr ""
+"使用此选项将流发送至在开启多播网络上的动态组计算机。这是一种最有效的将流发送"
+"到多台计算机的模式,但是它不能通过 Internet 工作。RTP 头部将被加到流中"
+
+#: modules/gui/macosx/wizard.m:319
+msgid "Back"
+msgstr "返回"
+
+#: modules/gui/macosx/wizard.m:322 modules/gui/macosx/wizard.m:325
+#: modules/gui/macosx/wizard.m:1273
+msgid "Streaming/Transcoding Wizard"
+msgstr "流/转码向导"
+
+#: modules/gui/macosx/wizard.m:326
+msgid "This wizard allows to configure simple streaming or transcoding setups."
+msgstr "此向导允许设置简单的流或转码设置。"
+
+#: modules/gui/macosx/wizard.m:328 modules/gui/macosx/wizard.m:329
+#: modules/gui/macosx/wizard.m:402 modules/gui/macosx/wizard.m:404
+#: modules/gui/macosx/wizard.m:406 modules/gui/macosx/wizard.m:421
+msgid "More Info"
+msgstr "更多信息"
+
+#: modules/gui/macosx/wizard.m:330
+msgid ""
+"This wizard only gives access to a small subset of VLC's streaming and "
+"transcoding capabilities. The Open and 'Saving/Streaming' dialogs will give "
+"access to more features."
+msgstr ""
+"此向导仅提供访问了 VLC 流和转码功能中的很小一部分。打开 '保存/流' 对话框将能"
+"访问到更多的功能。"
+
+#: modules/gui/macosx/wizard.m:335 modules/gui/macosx/wizard.m:493
+#: modules/gui/macosx/wizard.m:1677
+msgid "Stream to network"
+msgstr "将流发布到网络中"
+
+#: modules/gui/macosx/wizard.m:337 modules/gui/macosx/wizard.m:1685
+msgid "Transcode/Save to file"
+msgstr "转码/保存到文件"
+
+#: modules/gui/macosx/wizard.m:340
+msgid "Choose input"
+msgstr "选择输入"
+
+#: modules/gui/macosx/wizard.m:341
+msgid "Choose here your input stream."
+msgstr "在这里选择您的输入流。"
+
+#: modules/gui/macosx/wizard.m:343 modules/gui/macosx/wizard.m:531
+#: modules/gui/macosx/wizard.m:1719
+msgid "Select a stream"
+msgstr "选择一个流"
+
+#: modules/gui/macosx/wizard.m:345
+msgid "Existing playlist item"
+msgstr "已存在的播放列表项目"
+
+#: modules/gui/macosx/wizard.m:353 modules/gui/macosx/wizard.m:433
+msgid "Partial Extract"
+msgstr "部分释放"
+
+#: modules/gui/macosx/wizard.m:355
+msgid ""
+"This can be used to read only a part of the stream. It must be possible to "
+"control the incoming stream (for example, a file or a disc, but not an UDP "
+"network stream.) The starting and ending times can be given in seconds."
+msgstr ""
+"这仅能被用作读取一部分的流。它必须可能控制入站流 (例如,一个文件或一张光盘,"
+"但是不能是一个 UDP 网络流。) 必须以秒为单位给出开始和结束的时间。"
+
+#: modules/gui/macosx/wizard.m:359
+msgid "From"
+msgstr "从"
+
+#: modules/gui/macosx/wizard.m:360
+msgid "To"
+msgstr "到"
+
+#: modules/gui/macosx/wizard.m:364
+msgid "This page allows to select how the input stream will be sent."
+msgstr "此页将选择输入流将如何被发送。"
+
+#: modules/gui/macosx/wizard.m:366 modules/gui/macosx/wizard.m:427
+#: modules/gui/qt4/dialogs/convert.cpp:55 modules/stream_out/rtp.c:74
+msgid "Destination"
+msgstr "目标"
+
+#: modules/gui/macosx/wizard.m:367 modules/gui/macosx/wizard.m:439
+msgid "Streaming method"
+msgstr "流模式"
+
+#: modules/gui/macosx/wizard.m:368
+msgid "Address of the computer to stream to."
+msgstr "要发送流的目标计算机地址。"
+
+#: modules/gui/macosx/wizard.m:370
+msgid "UDP Unicast"
+msgstr "UDP 单播"
+
+#: modules/gui/macosx/wizard.m:371
+msgid "UDP Multicast"
+msgstr "UDP 多播"
+
+#: modules/gui/macosx/wizard.m:376
+#: modules/stream_out/transcode/transcode.c:154
+msgid "Transcode"
+msgstr "转码"
+
+#: modules/gui/macosx/wizard.m:377
+msgid ""
+"This page allows to change the compression format of the audio or video "
+"tracks. To change only the container format, proceed to next page."
+msgstr ""
+"此页将允许更改音频或视频轨道的压缩格式。要仅更改容器的格式, 请转到下一页。"
+
+#: modules/gui/macosx/wizard.m:382 modules/gui/macosx/wizard.m:441
+msgid "Transcode audio"
+msgstr "转码音频"
+
+#: modules/gui/macosx/wizard.m:383 modules/gui/macosx/wizard.m:443
+msgid "Transcode video"
+msgstr "转码视频"
+
+#: modules/gui/macosx/wizard.m:386 modules/gui/macosx/wizard.m:1821
+msgid ""
+"Enabling this allows to transcode the audio track if one is present in the "
+"stream."
+msgstr "开启此选项将允许转码已经在流中的音频轨道。"
+
+#: modules/gui/macosx/wizard.m:388 modules/gui/macosx/wizard.m:1838
+msgid ""
+"Enabling this allows to transcode the video track if one is present in the "
+"stream."
+msgstr "开启此选项将允许转码已经在流中的视频轨道。"
+
+#: modules/gui/macosx/wizard.m:392
+msgid "Encapsulation format"
+msgstr "封装格式"
+
+#: modules/gui/macosx/wizard.m:393
+msgid ""
+"This page allows to select how the stream will be encapsulated. Depending on "
+"previously chosen settings all formats won't be available."
+msgstr "此页允许您选择流将被如何封装。依据先前的设置,可能不是所有格式都可用。"
+
+#: modules/gui/macosx/wizard.m:398
+msgid "Additional streaming options"
+msgstr "附加流选项"
+
+#: modules/gui/macosx/wizard.m:399
+msgid "In this page, a few additional streaming parameters can be set."
+msgstr "在此页中,可以设置一些附加的流参数。"
+
+#: modules/gui/macosx/wizard.m:401 modules/gui/macosx/wizard.m:1866
+msgid "Time-To-Live (TTL)"
+msgstr "实时 (TTL)"
+
+#: modules/gui/macosx/wizard.m:403 modules/gui/macosx/wizard.m:435
+#: modules/gui/macosx/wizard.m:1877
+msgid "SAP Announce"
+msgstr "SAP 广播"
+
+#: modules/gui/macosx/wizard.m:405 modules/gui/macosx/wizard.m:415
+#: modules/gui/macosx/wizard.m:447 modules/gui/macosx/wizard.m:1890
+msgid "Local playback"
+msgstr "本地播放"
+
+#: modules/gui/macosx/wizard.m:407 modules/gui/macosx/wizard.m:416
+msgid "Add Subtitles to transcoded video"
+msgstr "添加字幕到已转换的视频"
+
+#: modules/gui/macosx/wizard.m:410
+msgid "Additional transcode options"
+msgstr "附加转码选项"
+
+#: modules/gui/macosx/wizard.m:411
+msgid "In this page, a few additional transcoding parameters can be set."
+msgstr "在此页中,可以设置一些附加的转码参数。"
+
+#: modules/gui/macosx/wizard.m:413 modules/gui/macosx/wizard.m:1095
+msgid "Select the file to save to"
+msgstr "选择要保存的文件"
+
+#: modules/gui/macosx/wizard.m:417
+msgid ""
+"Adds available subtitles directly to the video. These cannot be disabled by "
+"the receiving user as they become part of the image."
+msgstr "添加要直接用于视频的字幕。这些不会显示给接收用户而是作为图像的一部分。"
+
+#: modules/gui/macosx/wizard.m:424
+msgid ""
+"This page lists all the settings. Click \"Finish\" to start streaming or "
+"transcoding."
+msgstr "此页列出所有设置。单击 \"完成\" 开始串流或转码。"
+
+#: modules/gui/macosx/wizard.m:426
+msgid "Summary"
+msgstr "摘要"
+
+#: modules/gui/macosx/wizard.m:429
+msgid "Encap. format"
+msgstr "Encap. 格式"
+
+#: modules/gui/macosx/wizard.m:431
+msgid "Input stream"
+msgstr "输入流"
+
+#: modules/gui/macosx/wizard.m:437
+msgid "Save file to"
+msgstr "保存文件到"
+
+#: modules/gui/macosx/wizard.m:445
+msgid "Include subtitles"
+msgstr "包含字幕"
+
+#: modules/gui/macosx/wizard.m:599
+msgid "No input selected"
+msgstr "未选择输入"
+
+#: modules/gui/macosx/wizard.m:601
+msgid ""
+"No new stream or valid playlist item has been selected.\n"
+"\n"
+"Choose one before going to the next page."
+msgstr ""
+"未选择新的流或可用的播放列表。\n"
+"\n"
+"在转到下一页之前选择一个项目。"
+
+#: modules/gui/macosx/wizard.m:662
+msgid "No valid destination"
+msgstr "无有效的目标"
+
+#: modules/gui/macosx/wizard.m:664
+msgid ""
+"A valid destination has to be selected Enter either a Unicast-IP or a "
+"Multicast-IP.\n"
+"\n"
+"If you don't know what this means, have a look at the VLC Streaming HOWTO "
+"and the help texts in this window."
+msgstr ""
+"通过输入一个单播 IP 或一个多播 IP 选择一个有效的目标。\n"
+"\n"
+"如果您不知道这意味着什么,请查看此窗口中有关的 VLC 流的如何帮助文本。"
+
+#: modules/gui/macosx/wizard.m:1063
+msgid ""
+"The chosen codecs are not compatible with each other. For example: It is "
+"impossibleto mix uncompressed audio with any video codec.\n"
+"\n"
+"Correct your selection and try again."
+msgstr ""
+"选择的编解码器不兼容于其它。例如: 无法与任何视频编解码器混合未压缩的音频。\n"
+"\n"
+"请更正您的选择再试。"
+
+#: modules/gui/macosx/wizard.m:1090
+msgid "Select the directory to save to"
+msgstr "请选择要保存到的目录"
+
+#: modules/gui/macosx/wizard.m:1146
+msgid "No folder selected"
+msgstr "未选择文件夹"
+
+#: modules/gui/macosx/wizard.m:1148
+msgid "A directory where to save the files has to be selected."
+msgstr "要选择一个保存文件的目录。"
+
+#: modules/gui/macosx/wizard.m:1150
+msgid ""
+"Enter either a valid path or use the \"Choose...\" button to select a "
+"location."
+msgstr "请输入一个有效的逻辑或通过 \"选择...\" 按钮选择一个位置。"
+
+#: modules/gui/macosx/wizard.m:1153
+msgid "No file selected"
+msgstr "未选择文件"
+
+#: modules/gui/macosx/wizard.m:1155
+msgid "A file where to save the stream has to be selected."
+msgstr "要选择一个保存流的文件。"
+
+#: modules/gui/macosx/wizard.m:1157
+msgid ""
+"Enter either a valid path or use the \"Choose\" button to select a location."
+msgstr "请输入一个有效的逻辑或通过 \"选择...\" 按钮选择一个位置。"
+
+#: modules/gui/macosx/wizard.m:1360
+msgid "Finish"
+msgstr "完成"
+
+#: modules/gui/macosx/wizard.m:1373 modules/gui/macosx/wizard.m:1402
+#: modules/gui/macosx/wizard.m:1432
+msgid "yes"
+msgstr "是"
+
+#: modules/gui/macosx/wizard.m:1375 modules/gui/macosx/wizard.m:1385
+#: modules/gui/macosx/wizard.m:1398 modules/gui/macosx/wizard.m:1404
+#: modules/gui/macosx/wizard.m:1416 modules/gui/macosx/wizard.m:1435
+msgid "no"
+msgstr "否"
+
+#: modules/gui/macosx/wizard.m:1381
+msgid "yes: from %@ to %@ secs"
+msgstr "是: 从 %@ 到 %@ 秒"
+
+#: modules/gui/macosx/wizard.m:1391 modules/gui/macosx/wizard.m:1409
+msgid "yes: %@ @ %@ kb/s"
+msgstr "是: %@ @ %@ kb/s"
+
+#: modules/gui/macosx/wizard.m:1679
+msgid "This allows to stream on a network."
+msgstr "这里允许通过网络发布流。"
+
+#: modules/gui/macosx/wizard.m:1687
+msgid ""
+"This allows to save a stream to a file. The can be reencoded on the fly. "
+"Whatever VLC can read can be saved.\n"
+"Please note that VLC is not very suited for file to file transcoding. Its "
+"transcoding features are however useful to save network streams, for example."
+msgstr ""
+"这允许将流保存为文件。这可以在编码时获得非常快的速度。无论 VLC 是否可以读取并"
+"保存。\n"
+"请注意 VLC 不是非常适合进行文件到文件的转码。它的转码功能是用于保存网络流的。"
+
+#: modules/gui/macosx/wizard.m:1816
+msgid "Select your audio codec. Click one to get more information."
+msgstr "请选择您的音频编解码器。点击获取更多信息。"
+
+#: modules/gui/macosx/wizard.m:1833
+msgid "Select your video codec. Click one to get more information."
+msgstr "请选择您的视频编解码器。点击获取更多信息。"
+
+#: modules/gui/macosx/wizard.m:1868
+msgid ""
+"This allows to define the TTL (Time-To-Live) of the stream. This parameter "
+"is the maximum number of routers your stream can go through. If you don't "
+"know what it means, or if you want to stream on your local network only, "
+"leave this setting to 1."
+msgstr ""
+"这允许您定义流的 TTL (存活时间)。此参数是您的流可以在路由中被传送的最大数。如"
+"果您不知道这意味这什么或者您希望流仅在您的本地网络中传送,请保持此设置为 1。"
+
+#: modules/gui/macosx/wizard.m:1879
+msgid ""
+"When streaming using UDP, the streams can be announced using the SAP/SDP "
+"announcing protocol. This way, the clients won't have to type in the "
+"multicast address, it will appear in their playlist if they enable the SAP "
+"extra interface.\n"
+"If you want to give a name to your stream, enter it here, else, a default "
+"name will be used."
+msgstr ""
+"当流使用 UDP 时,流可以通过 SAP/SDP 广播协议进行广播。此方式中,客户端无需输"
+"入多播地址,如果它们开启了 SAP 扩展界面,那么将会自动出现在播放列表中。\n"
+"如果您想给您的流取个名字,请在这里输入,否则将使用默认的名称。"
+
+#: modules/gui/macosx/wizard.m:1892
+msgid ""
+"When this option is enabled, the stream will be both played and transcoded/"
+"streamed.\n"
+"\n"
+"Note that this requires much more CPU power than simple transcoding or "
+"streaming."
+msgstr ""
+"在此选项开启后,流将同时被播放并转码/流式化。\n"
+"\n"
+"注意这将比单纯的转码和流式化需要更多的 CPU 资源。"
+
+#: modules/gui/macosx_dialog_provider/dialogProvider.m:85
+msgid "Hide no user action dialogs"
+msgstr "隐藏无用户操作的对话框"
+
+#: modules/gui/macosx_dialog_provider/dialogProvider.m:86
+msgid ""
+"Don't display dialogs that don't require user action (Critical and error "
+"panel)."
+msgstr "不要显示不需要用户操作的对话框 (关键信息与错误信息板)。"
+
+#: modules/gui/hildon/maemo.c:62
+msgid "Maemo hildon interface"
+msgstr "Maemo hildon 接口"
+
+#: modules/gui/minimal_macosx/macosx.c:58
+msgid "Minimal Mac OS X interface"
+msgstr "最小化 Mac OS X 界面"
+
+#: modules/gui/minimal_macosx/macosx.c:68
+msgid "Minimal Mac OS X OpenGL video output (opens a borderless window)"
+msgstr "最小化 Mac OS X OpenGL 视频输出 (打开一个无边框的窗口)"
+
+#: modules/gui/ncurses.c:103
+msgid "Filebrowser starting point"
+msgstr "文件浏览器启始点"
+
+#: modules/gui/ncurses.c:105
+msgid ""
+"This option allows you to specify the directory the ncurses filebrowser will "
+"show you initially."
+msgstr "此选项将允许您指定在文件浏览器启动后默认显示的目录。"
+
+#: modules/gui/ncurses.c:110
+msgid "Ncurses interface"
+msgstr "Ncurses 界面"
+
+#: modules/gui/ncurses.c:1486
+msgid "[Repeat] "
+msgstr "[重复] "
+
+#: modules/gui/ncurses.c:1487
+msgid "[Random] "
+msgstr "[随机] "
+
+#: modules/gui/ncurses.c:1488
+msgid "[Loop]"
+msgstr "[循环]"
+
+#: modules/gui/ncurses.c:1499
+#, c-format
+msgid " Source : %s"
+msgstr " 源 : %s"
+
+#: modules/gui/ncurses.c:1506
+#, c-format
+msgid " State : Playing %s"
+msgstr " 状态 : 正在播放 %s"
+
+#: modules/gui/ncurses.c:1510
+#, c-format
+msgid " State : Opening/Connecting %s"
+msgstr " 状态 : 正在打开/连接 %s"
+
+#: modules/gui/ncurses.c:1514
+#, c-format
+msgid " State : Paused %s"
+msgstr " 状态 : 暂停 %s"
+
+#: modules/gui/ncurses.c:1528
+#, c-format
+msgid " Position : %s/%s (%.2f%%)"
+msgstr " 位置 : %s/%s (%.2f%%)"
+
+#: modules/gui/ncurses.c:1532
+#, c-format
+msgid " Volume : %i%%"
+msgstr " 音量 : %i%%"
+
+#: modules/gui/ncurses.c:1539
+#, c-format
+msgid " Title : %d/%d"
+msgstr " 标题 : %d/%d"
+
+#: modules/gui/ncurses.c:1547
+#, c-format
+msgid " Chapter : %d/%d"
+msgstr " 章节 : %d/%d"
+
+#: modules/gui/ncurses.c:1557
+#, c-format
+msgid " Source: <no current item> %s"
+msgstr " 源: <无当前项目> %s"
+
+#: modules/gui/ncurses.c:1559
+msgid " [ h for help ]"
+msgstr " [ h 获取帮助 ]"
+
+#: modules/gui/ncurses.c:1581
+msgid " Help "
+msgstr " 帮助 "
+
+#: modules/gui/ncurses.c:1585
+msgid "[Display]"
+msgstr "[显示]"
+
+#: modules/gui/ncurses.c:1588
+msgid " h,H Show/Hide help box"
+msgstr " h,H 显示/隐藏帮助框"
+
+#: modules/gui/ncurses.c:1589
+msgid " i Show/Hide info box"
+msgstr " i 显示/隐藏信息框"
+
+#: modules/gui/ncurses.c:1590
+msgid " m Show/Hide metadata box"
+msgstr " m 显示/隐藏元数据框"
+
+#: modules/gui/ncurses.c:1591
+msgid " L Show/Hide messages box"
+msgstr " L 显示/隐藏消息框"
+
+#: modules/gui/ncurses.c:1592
+msgid " P Show/Hide playlist box"
+msgstr " P 显示/隐藏播放列表框"
+
+#: modules/gui/ncurses.c:1593
+msgid " B Show/Hide filebrowser"
+msgstr " B 显示/隐藏文件浏览器"
+
+#: modules/gui/ncurses.c:1594
+msgid " x Show/Hide objects box"
+msgstr " x 显示/隐藏对象框"
+
+#: modules/gui/ncurses.c:1595
+msgid " S Show/Hide statistics box"
+msgstr " S 显示/隐藏统计框"
+
+#: modules/gui/ncurses.c:1596
+msgid " c Switch color on/off"
+msgstr " c 切换色彩开/关"
+
+#: modules/gui/ncurses.c:1597
+msgid " Esc Close Add/Search entry"
+msgstr " Esc 关闭添加/搜索条目"
+
+#: modules/gui/ncurses.c:1602
+msgid "[Global]"
+msgstr "[全局]"
+
+#: modules/gui/ncurses.c:1605
+msgid " q, Q, Esc Quit"
+msgstr " q, Q, Esc 退出"
+
+#: modules/gui/ncurses.c:1606
+msgid " s Stop"
+msgstr " s 停止"
+
+#: modules/gui/ncurses.c:1607
+msgid " <space> Pause/Play"
+msgstr " <space> 暂停/播放"
+
+#: modules/gui/ncurses.c:1608
+msgid " f Toggle Fullscreen"
+msgstr " f 全屏幕切换"
+
+#: modules/gui/ncurses.c:1609
+msgid " n, p Next/Previous playlist item"
+msgstr " n, p 下一个/上一个播放列表项目"
+
+#: modules/gui/ncurses.c:1610
+msgid " [, ] Next/Previous title"
+msgstr " [, ] 下一个/上一个标题"
+
+#: modules/gui/ncurses.c:1611
+msgid " <, > Next/Previous chapter"
+msgstr " <, > 下一个/上一个章节"
+
+#: modules/gui/ncurses.c:1612
+#, c-format
+msgid " <right> Seek +1%%"
+msgstr " <right> 搜索 +1%%"
+
+#: modules/gui/ncurses.c:1613
+#, c-format
+msgid " <left> Seek -1%%"
+msgstr " <left> 搜索 -1%%"
+
+#: modules/gui/ncurses.c:1614
+msgid " a Volume Up"
+msgstr " a 增加音量"
+
+#: modules/gui/ncurses.c:1615
+msgid " z Volume Down"
+msgstr " z 减少音量"
+
+#: modules/gui/ncurses.c:1620
+msgid "[Playlist]"
+msgstr "[播放列表]"
+
+#: modules/gui/ncurses.c:1623
+msgid " r Toggle Random playing"
+msgstr " r 切换随机播放"
+
+#: modules/gui/ncurses.c:1624
+msgid " l Toggle Loop Playlist"
+msgstr " l 切换循环播放列表"
+
+#: modules/gui/ncurses.c:1625
+msgid " R Toggle Repeat item"
+msgstr " R 切换重复项目"
+
+#: modules/gui/ncurses.c:1626
+msgid " o Order Playlist by title"
+msgstr " o 按标题排序播放列表"
+
+#: modules/gui/ncurses.c:1627
+msgid " O Reverse order Playlist by title"
+msgstr " O 按标题反向排序播放列表"
+
+#: modules/gui/ncurses.c:1628
+msgid " g Go to the current playing item"
+msgstr " g 转到当前正在播放的项目"
+
+#: modules/gui/ncurses.c:1629
+msgid " / Look for an item"
+msgstr " / 查找一个项目"
+
+#: modules/gui/ncurses.c:1630
+msgid " A Add an entry"
+msgstr " A 添加一个条目"
+
+#: modules/gui/ncurses.c:1631
+msgid " D, <del> Delete an entry"
+msgstr " D, <del> 删除一个条目"
+
+#: modules/gui/ncurses.c:1632
+msgid " <backspace> Delete an entry"
+msgstr " <backspace> 删除一个条目"
+
+#: modules/gui/ncurses.c:1633
+msgid " e Eject (if stopped)"
+msgstr " e 弹出 (如果已停止)"
+
+#: modules/gui/ncurses.c:1638
+msgid "[Filebrowser]"
+msgstr "[文件浏览器]"
+
+#: modules/gui/ncurses.c:1641
+msgid " <enter> Add the selected file to the playlist"
+msgstr " <enter> 添加选定的文件到播放列表中"
+
+#: modules/gui/ncurses.c:1642
+msgid " <space> Add the selected directory to the playlist"
+msgstr " <space> 添加选定的目录到播放列表中"
+
+#: modules/gui/ncurses.c:1643
+msgid " . Show/Hide hidden files"
+msgstr " . 显示/隐藏文件"
+
+#: modules/gui/ncurses.c:1648
+msgid "[Boxes]"
+msgstr "[对话框]"
+
+#: modules/gui/ncurses.c:1651
+msgid " <up>,<down> Navigate through the box line by line"
+msgstr " <up>,<down> 按一行一行的浏览对话框"
+
+#: modules/gui/ncurses.c:1652
+msgid " <pgup>,<pgdown> Navigate through the box page by page"
+msgstr " <pgup>,<pgdown> 按一页一页的浏览对话框"
+
+#: modules/gui/ncurses.c:1657
+msgid "[Player]"
+msgstr "[播放器]"
+
+#: modules/gui/ncurses.c:1660
+#, c-format
+msgid " <up>,<down> Seek +/-5%%"
+msgstr " <up>,<down> 搜索 +/-5%%"
+
+#: modules/gui/ncurses.c:1665
+msgid "[Miscellaneous]"
+msgstr "[其它]"
+
+#: modules/gui/ncurses.c:1668
+msgid " Ctrl-l Refresh the screen"
+msgstr " Ctrl-l 刷新屏幕"
+
+#: modules/gui/ncurses.c:1689
+msgid " Information "
+msgstr " 信息 "
+
+#: modules/gui/ncurses.c:1701
+#, c-format
+msgid " [%s]"
+msgstr " [%s]"
+
+#: modules/gui/ncurses.c:1708
+#, c-format
+msgid " %s: %s"
+msgstr " %s: %s"
+
+#: modules/gui/ncurses.c:1715 modules/gui/ncurses.c:1803
+msgid "No item currently playing"
+msgstr "没有当前正在播放的项目"
+
+#: modules/gui/ncurses.c:1828
+msgid " Logs "
+msgstr " 日志 "
+
+#: modules/gui/ncurses.c:1873
+msgid " Browse "
+msgstr " 浏览 "
+
+#: modules/gui/ncurses.c:1928
+msgid " Objects "
+msgstr " 对象 "
+
+#: modules/gui/ncurses.c:1942
+msgid " Stats "
+msgstr " 状态 "
+
+#: modules/gui/ncurses.c:2037
+#, c-format
+msgid "\\ sending bitrate : %6.0f kb/s"
+msgstr "\\ 正在发送的位率 : %6.0f kb/s"
+
+#: modules/gui/ncurses.c:2070
+msgid " Playlist (All, one level) "
+msgstr " 播放列表 (全部、一级) "
+
+#: modules/gui/ncurses.c:2073
+msgid " Playlist (By category) "
+msgstr " 播放列表 (按分类) "
+
+#: modules/gui/ncurses.c:2076
+msgid " Playlist (Manually added) "
+msgstr " 播放列表 (手动添加) "
+
+#: modules/gui/ncurses.c:2173 modules/gui/ncurses.c:2177
+#, c-format
+msgid "Find: %s"
+msgstr "查找: %s"
+
+#: modules/gui/ncurses.c:2186
+#, c-format
+msgid "Open: %s"
+msgstr "打开: %s"
+
+#: modules/gui/qt4/components/controller.cpp:281
+msgid "Shift+L"
+msgstr "Shift+L"
+
+#: modules/gui/qt4/components/controller.cpp:378
+msgid "Click to toggle between loop one, loop all"
+msgstr "单击可切换循环单首/循环全部"
+
+#: modules/gui/qt4/components/controller.cpp:441
+msgid "Previous Chapter/Title"
+msgstr "上一个章节/标题"
+
+#: modules/gui/qt4/components/controller.cpp:447
+msgid "Menu"
+msgstr "菜单"
+
+#: modules/gui/qt4/components/controller.cpp:453
+msgid "Next Chapter/Title"
+msgstr "下一个章节/标题"
+
+#: modules/gui/qt4/components/controller.cpp:486
+msgid "Teletext Activation"
+msgstr "Teletext 激活"
+
+#: modules/gui/qt4/components/controller.cpp:502
+msgid "Toggle Transparency "
+msgstr "打开或关闭透明度"
+
+#: modules/gui/qt4/components/controller.hpp:42
+msgid ""
+"Play\n"
+"If the playlist is empty, open a medium"
+msgstr ""
+"播放\n"
+"如果播放列表为空则打开一个媒体"
+
+#: modules/gui/qt4/components/controller.hpp:106
+msgid "De-Fullscreen"
+msgstr "取消全屏幕"
+
+#: modules/gui/qt4/components/controller.hpp:106
+msgid "Extended panel"
+msgstr "扩展面板"
+
+#: modules/gui/qt4/components/controller.hpp:107
+msgid "A->B Loop"
+msgstr "A->B 循环"
+
+#: modules/gui/qt4/components/controller.hpp:107
+msgid "Frame By Frame"
+msgstr "逐帧"
+
+#: modules/gui/qt4/components/controller.hpp:107
+msgid "Trickplay Reverse"
+msgstr "Trickplay 反序"
+
+#: modules/gui/qt4/components/controller.hpp:108
+#: modules/gui/qt4/components/controller.hpp:118
+msgid "Step backward"
+msgstr "往回步进"
+
+#: modules/gui/qt4/components/controller.hpp:108
+#: modules/gui/qt4/components/controller.hpp:118
+msgid "Step forward"
+msgstr "向前步进"
+
+#: modules/gui/qt4/components/controller.hpp:109
+msgid "Loop/Repeat mode"
+msgstr "循环/重复模式"
+
+#: modules/gui/qt4/components/controller.hpp:111
+msgid "Stop playback"
+msgstr "停止播放"
+
+#: modules/gui/qt4/components/controller.hpp:111
+msgid "Open a medium"
+msgstr "打开一个媒介"
+
+#: modules/gui/qt4/components/controller.hpp:112
+msgid "Previous media in the playlist"
+msgstr "上一个在播放列表中的媒体"
+
+#: modules/gui/qt4/components/controller.hpp:113
+msgid "Next media in the playlist"
+msgstr "下一个在播放列表中的媒体"
+
+#: modules/gui/qt4/components/controller.hpp:114
+msgid "Toggle the video in fullscreen"
+msgstr "切换全屏幕中的视频"
+
+#: modules/gui/qt4/components/controller.hpp:114
+msgid "Toggle the video out fullscreen"
+msgstr "将视频切换出全屏状态"
+
+#: modules/gui/qt4/components/controller.hpp:115
+msgid "Show extended settings"
+msgstr "显示扩展设置"
+
+#: modules/gui/qt4/components/controller.hpp:115
+msgid "Show playlist"
+msgstr "显示播放列表"
+
+#: modules/gui/qt4/components/controller.hpp:116
+msgid "Take a snapshot"
+msgstr "捕获截图"
+
+#: modules/gui/qt4/components/controller.hpp:117
+msgid "Loop from point A to point B continuously."
+msgstr "连续地从点 A 到点 B 循环。"
+
+#: modules/gui/qt4/components/controller.hpp:117
+msgid "Frame by frame"
+msgstr "逐帧"
+
+#: modules/gui/qt4/components/controller.hpp:118
+msgid "Reverse"
+msgstr "倒序"
+
+#: modules/gui/qt4/components/controller.hpp:119
+msgid "Change the loop and repeat modes"
+msgstr "更改循环与重复模式"
+
+#: modules/gui/qt4/components/controller_widget.cpp:133
+msgctxt "Tooltip|Unmute"
+msgid "Unmute"
+msgstr "取消静音"
+
+#: modules/gui/qt4/components/controller_widget.cpp:142
+msgctxt "Tooltip|Mute"
+msgid "Mute"
+msgstr "静音"
+
+#: modules/gui/qt4/components/controller_widget.cpp:229
+msgid "Pause the playback"
+msgstr "暂停回放"
+
+#: modules/gui/qt4/components/controller_widget.cpp:238
+msgid ""
+"Loop from point A to point B continuously\n"
+"Click to set point A"
+msgstr ""
+"连续的从点 A 到点 B 的循环。\n"
+"单击设置点 A"
+
+#: modules/gui/qt4/components/controller_widget.cpp:244
+msgid "Click to set point B"
+msgstr "单击设置点 B"
+
+#: modules/gui/qt4/components/controller_widget.cpp:249
+msgid "Stop the A to B loop"
+msgstr "停止 A 到 B 循环"
+
+#: modules/gui/qt4/components/extended_panels.cpp:998
+#: modules/gui/qt4/components/extended_panels.cpp:1055
+msgid "Preamp\n"
+msgstr "预放大\n"
+
+#: modules/gui/qt4/components/extended_panels.cpp:999
+#: modules/gui/qt4/components/extended_panels.cpp:1056
+msgid "dB"
+msgstr "dB"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1137
+msgid "Enable spatializer"
+msgstr "开启空间化"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1278
+msgid "Audio/Video"
+msgstr "音频/视频"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1294
+msgid "Advance of audio over video:"
+msgstr "通过视频的高级音频:"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1303
+msgid ""
+"A positive value means that\n"
+"the audio is ahead of the video"
+msgstr ""
+"一个积极值意味这\n"
+"音频在视频的头部"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1311
+msgid "Subtitles/Video"
+msgstr "字幕/视频"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1327
+msgid "Advance of subtitles over video:"
+msgstr "通过视频的高级字幕:"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1336
+msgid ""
+"A positive value means that\n"
+"the subtitles are ahead of the video"
+msgstr ""
+"一个积极值意味这\n"
+"字幕在视频的头部"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1355
+msgid "Speed of the subtitles:"
+msgstr "字幕速度:"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1388
+msgid "Force update of this dialog's values"
+msgstr "强制更新此对话框的值"
+
+#: modules/gui/qt4/components/info_panels.cpp:132
+msgid "Comments"
+msgstr "注释"
+
+#: modules/gui/qt4/components/info_panels.cpp:325
+msgid "Extra metadata and other information are shown in this panel.\n"
+msgstr "将在此面板中显示扩展元数据和其它信息。\n"
+
+#: modules/gui/qt4/components/info_panels.cpp:404
+msgid ""
+"Information about what your media or stream is made of.\n"
+"Muxer, Audio and Video Codecs, Subtitles are shown."