+#: modules/codec/vpx.c:49
+#, fuzzy
+msgid "WebM video decoder"
+msgstr "CDG 视频解码器"
+
+#: modules/codec/wmafixed/wma.c:82
+msgid "WMA v1/v2 fixed point audio decoder"
+msgstr "WMA v1/v2 定点音频解码器"
+
+#: modules/codec/x264.c:70
+msgid "Maximum GOP size"
+msgstr "最大 GOP 大小"
+
+#: modules/codec/x264.c:71
+msgid ""
+"Sets maximum interval between IDR-frames.Larger values save bits, thus "
+"improving quality for a given bitrate at the cost of seeking precision. Use "
+"-1 for infinite."
+msgstr ""
+"设置 IDR 帧之间的最大间隔。较大的帧将节省流的尺寸，因此可在牺牲定位精度的代价"
+"前提下，提高特定比特率下的质量。使用 -1 可设为无限间隔。"
+
+#: modules/codec/x264.c:75
+msgid "Minimum GOP size"
+msgstr "最小 GOP 大小"
+
+#: modules/codec/x264.c:76
+msgid ""
+"Sets minimum interval between IDR-frames. In H.264, I-frames do not "
+"necessarily bound a closed GOP because it is allowable for a P-frame to be "
+"predicted from more frames than just the one frame before it (also see "
+"reference frame option). Therefore, I-frames are not necessarily seekable. "
+"IDR-frames restrict subsequent P-frames from referring to any frame prior to "
+"the IDR-frame. \n"
+"If scenecuts appear within this interval, they are still encoded as I-"
+"frames, but do not start a new GOP."
+msgstr ""
+"设置 IDR 帧之间的最小间隔。在 H.264 中 I 帧没有必要绑定一个封闭的 GOP，因为它"
+"允许在它之前预测更多的帧 (也可以查看参考帧选项)。因此 I 帧没有搜索的必要。"
+"IDR 帧将从任意参考帧之前限制之后的 P 帧。\n"
+"如果场景出现在此间隔内，它们还是将会被编码为 I 帧，但是不启动一个新的 GOP。"
+
+#: modules/codec/x264.c:85
+msgid "Use recovery points to close GOPs"
+msgstr "使用恢复点闭合 GOP"
+
+#: modules/codec/x264.c:87
+msgid ""
+"none: use closed GOPs only\n"
+"normal: use standard open GOPs\n"
+"bluray: use Blu-ray compatible open GOPs"
+msgstr ""
+"无: 仅使用闭合 GOP\n"
+"常规: 使用常规开放 GOP\n"
+"bluray: 使用 Blu-ray 兼容的开放 GOP"
+
+#: modules/codec/x264.c:91
+msgid "use open GOP, for bluray compatibility use also bluray-compat option"
+msgstr "使用开放 GOP 保证 bluray 兼容性，同时使用 bluray-compat 选项"
+
+#: modules/codec/x264.c:94
+msgid "Enable compatibility hacks for Blu-ray support"
+msgstr "启用 Blu-ray 兼容性支持"
+
+#: modules/codec/x264.c:95
+msgid ""
+"Enable hacks for Blu-ray support, this doesn't enforce every aspect of Blu-"
+"ray compatibility\n"
+"e.g. resolution, framerate, level"
+msgstr ""
+"启用 Blu-ray 支持，但本项不强制 Blu-ray 兼容性的全部方面\n"
+"如分辨率、帧率、层级"
+
+#: modules/codec/x264.c:98
+msgid "Extra I-frames aggressivity"
+msgstr "扩展 I 帧激进性"
+
+#: modules/codec/x264.c:99
+msgid ""
+"Scene-cut detection. Controls how aggressively to insert extra I-frames. "
+"With small values of scenecut, the codec often has to force an I-frame when "
+"it would exceed keyint. Good values of scenecut may find a better location "
+"for the I-frame. Large values use more I-frames than necessary, thus wasting "
+"bits. -1 disables scene-cut detection, so I-frames are inserted only every "
+"other keyint frames, which probably leads to ugly encoding artifacts. Range "
+"1 to 100."
+msgstr ""
+"场景剪辑检测。控制如何主动的插入额外的 I 帧。较小的场景剪辑值，编解码器将会经"
+"常在超过关键值时强制一个 I 帧。较好的场景剪辑值可能会为 I 帧查找一个较佳的位"
+"置。较大的值将使用尽可能多的 I 帧，因此产生不必要的体积增加。-1 为关闭场景剪"
+"辑检测，所以 I 帧将会被插入到每个 keyint 帧中，这可能会导致编码效率的降低。范"
+"围是 1 到 100。"
+
+#: modules/codec/x264.c:110
+msgid "B-frames between I and P"
+msgstr "在 I 和 P 之间的 B 帧"
+
+#: modules/codec/x264.c:111
+msgid "Number of consecutive B-frames between I and P-frames. Range 1 to 16."
+msgstr "在 I 和 P 帧之间的连续 B 帧。范围是 1 到 16。"
+
+#: modules/codec/x264.c:114
+msgid "Adaptive B-frame decision"
+msgstr "适应 B 帧检测"
+
+#: modules/codec/x264.c:115
+msgid ""
+"Force the specified number of consecutive B-frames to be used, except "
+"possibly before an I-frame.Range 0 to 2."
+msgstr "强制使用指定数量的连续 B 帧，除非可能是 I 帧前的 B 帧。范围由 0 到 2。"
+
+#: modules/codec/x264.c:119
+msgid "Influence (bias) B-frames usage"
+msgstr "影响 (倾向) B 帧用法"
+
+#: modules/codec/x264.c:120
+msgid ""
+"Bias the choice to use B-frames. Positive values cause more B-frames, "
+"negative values cause less B-frames."
+msgstr "倾向使用 B 帧。积极的值将造成更多的 B 帧, 保守的值将造成较少的 B 帧。"
+
+#: modules/codec/x264.c:124
+msgid "Keep some B-frames as references"
+msgstr "保留一些 B 帧作为参考"
+
+#: modules/codec/x264.c:125
+msgid ""
+"Allows B-frames to be used as references for predicting other frames. Keeps "
+"the middle of 2+ consecutive B-frames as a reference, and reorders frame "
+"appropriately.\n"
+" - none: Disabled\n"
+" - strict: Strictly hierarchical pyramid\n"
+" - normal: Non-strict (not Blu-ray compatible)\n"
+msgstr ""
+"允许将 B 用作预测其他帧的参考。保留连续超过 2 个 B 帧的中间部分作为参考，并适"
+"当重排帧。\n"
+" - none: 禁用\n"
+" - strict: 严格的等级椎\n"
+" - normal: 不严格 (与 Blu-ray 不兼容)\n"
+
+#: modules/codec/x264.c:133
+msgid "Use fullrange instead of TV colorrange"
+msgstr "使用完整色彩区间，代替 TV 色彩区间"
+
+#: modules/codec/x264.c:134
+msgid ""
+"TV-range is usually used colorrange, defining this to true will enable "
+"libx264 to use full colorrange on encoding"
+msgstr ""
+"TV-区间是常用的色彩区间，将本项设为真，可让 libx264 在编码时使用完整的色彩区"
+"间"
+
+#: modules/codec/x264.c:137
+msgid "CABAC"
+msgstr "CABAC"
+
+#: modules/codec/x264.c:138
+msgid ""
+"CABAC (Context-Adaptive Binary Arithmetic Coding). Slightly slows down "
+"encoding and decoding, but should save 10 to 15% bitrate."
+msgstr ""
+"CABAC (内容适应二进制算法编码)。将轻微的降速编码和解码, 但是会节省 10 到 15% "
+"位率。"
+
+#: modules/codec/x264.c:143
+msgid ""
+"Number of previous frames used as predictors. This is effective in Anime, "
+"but seems to make little difference in live-action source material. Some "
+"decoders are unable to deal with large frameref values. Range 1 to 16."
+msgstr ""
+"用作预测的前帧数量。这在动画中非常有效，但是可能会造成看上去和原始版本稍有差"
+"异。某些解码器可能无法分析大的参考帧值。范围是 1 到 16。"
+
+#: modules/codec/x264.c:148
+msgid "Skip loop filter"
+msgstr "跳过循环滤镜"
+
+#: modules/codec/x264.c:149
+msgid "Deactivate the deblocking loop filter (decreases quality)."
+msgstr "取消去块循环滤镜 (降低质量)。"
+
+#: modules/codec/x264.c:151
+msgid "Loop filter AlphaC0 and Beta parameters alpha:beta"
+msgstr "循环滤镜 AlphaCO 和 Beta 参数 alpha: beta"
+
+#: modules/codec/x264.c:152
+msgid ""
+"Loop filter AlphaC0 and Beta parameters. Range -6 to 6 for both alpha and "
+"beta parameters. -6 means light filter, 6 means strong."
+msgstr ""
+"循环滤镜 AlphaCO 和 Beta 参数。alpha 和 beta 参数的范围是 -6 到 6。-6 表示很"
+"少的过滤，6 表示强过滤。"
+
+#: modules/codec/x264.c:156
+msgid "H.264 level"
+msgstr "H.264 等级"
+
+#: modules/codec/x264.c:157
+msgid ""
+"Specify H.264 level (as defined by Annex A of the standard). Levels are not "
+"enforced; it's up to the user to select a level compatible with the rest of "
+"the encoding options. Range 1 to 5.1 (10 to 51 is also allowed). Set to 0 "
+"for letting x264 set level."
+msgstr ""
+"指定 H.264 等级 (如 Annex A 标准所定)。等级不是强制的；而是取决于用户所选的与"
+"其它编码选项相兼容的等级。范围从 1 到 5.1 (10 到 51 也允许使用)。设为 0 可让 "
+"x264 设定等级。"
+
+#: modules/codec/x264.c:162
+msgid "H.264 profile"
+msgstr "H.264 配置文件"
+
+#: modules/codec/x264.c:163
+msgid "Specify H.264 profile which limits are enforced over other settings"
+msgstr "指定 H.264 配置文件，将对其他设置强加限制"
+
+#: modules/codec/x264.c:169
+msgid "Interlaced mode"
+msgstr "交错模式"
+
+#: modules/codec/x264.c:170
+msgid "Pure-interlaced mode."
+msgstr "纯交错模式。"
+
+#: modules/codec/x264.c:172
+msgid "Frame packing"
+msgstr "帧封装"
+
+#: modules/codec/x264.c:173
+msgid ""
+"For stereoscopic videos define frame arrangement:\n"
+" 0: checkerboard - pixels are alternatively from L and R\n"
+" 1: column alternation - L and R are interlaced by column\n"
+" 2: row alternation - L and R are interlaced by row\n"
+" 3: side by side - L is on the left, R on the right\n"
+" 4: top bottom - L is on top, R on bottom\n"
+" 5: frame alternation - one view per frame"
+msgstr ""
+"为立体视频定义帧布局:\n"
+" 0: 棋盘 - 左右场像素交错\n"
+" 1: 列交替 - 左右场按列交替\n"
+" 2: 行交替 - 左右场按行交替\n"
+" 3: 左右 - 左场在左，右场在右\n"
+" 4: 上下 - 左场在上，右场在下\n"
+" 5: 帧交替 - 每帧一个视角"
+
+#: modules/codec/x264.c:181
+msgid "Use Periodic Intra Refresh"
+msgstr "使用周期性的内部刷新"
+
+#: modules/codec/x264.c:182
+msgid "Use Periodic Intra Refresh instead of IDR frames"
+msgstr "使用周期性的内部刷新而不是 IDR 帧"
+
+#: modules/codec/x264.c:184
+msgid "Use mb-tree ratecontrol"
+msgstr "使用 mb-tree 速率控制"
+
+#: modules/codec/x264.c:185
+msgid "You can disable use of Macroblock-tree on ratecontrol"
+msgstr "您可以禁用 Macroblock-tree 宏块树速率控制"
+
+#: modules/codec/x264.c:187
+msgid "Force number of slices per frame"
+msgstr "强制每帧切片数"
+
+#: modules/codec/x264.c:188
+msgid "Force rectangular slices and is overridden by other slicing options"
+msgstr "强制矩形切片，可被其他切片选项覆盖"
+
+#: modules/codec/x264.c:190
+msgid "Limit the size of each slice in bytes"
+msgstr "限定各切片的尺寸为指定字节数"
+
+#: modules/codec/x264.c:191
+msgid "Sets a maximum slice size in bytes, Includes NAL overhead in size"
+msgstr "设定以字节为单位的最大切片尺寸，含 NAL 开销所占的尺寸"
+
+#: modules/codec/x264.c:193
+msgid "Limit the size of each slice in macroblocks"
+msgstr "限定宏块中各切片的尺寸"
+
+#: modules/codec/x264.c:194
+msgid "Sets a maximum number of macroblocks per slice"
+msgstr "设置每切片的最大宏块数"
+
+#: modules/codec/x264.c:197
+msgid "Set QP"
+msgstr "设置 QP"
+
+#: modules/codec/x264.c:198
+msgid ""
+"This selects the quantizer to use. Lower values result in better fidelity, "
+"but higher bitrates. 26 is a good default value. Range 0 (lossless) to 51."
+msgstr ""
+"这将选择要使用的量化器。较低的值会有较佳的精确性，但是有较高的位率。26 是一个"
+"比较好的值。范围从 0 (无损) 到 51。"
+
+#: modules/codec/x264.c:202
+msgid "Quality-based VBR"
+msgstr "基于质量的 VBR"
+
+#: modules/codec/x264.c:203
+msgid "1-pass Quality-based VBR. Range 0 to 51."
+msgstr "基于质量的 1 pass VBR。范围从 0 到 51。"
+
+#: modules/codec/x264.c:205
+msgid "Min QP"
+msgstr "最小 QP"
+
+#: modules/codec/x264.c:206
+msgid "Minimum quantizer parameter. 15 to 35 seems to be a useful range."
+msgstr "最小的量化器参数。15 到 35 看上去是一个有用的范围。"
+
+#: modules/codec/x264.c:209
+msgid "Max QP"
+msgstr "最大 QP"
+
+#: modules/codec/x264.c:210
+msgid "Maximum quantizer parameter."
+msgstr "最大量化器参数。"
+
+#: modules/codec/x264.c:212
+msgid "Max QP step"
+msgstr "最大 QP 步进"
+
+#: modules/codec/x264.c:213
+msgid "Max QP step between frames."
+msgstr "在帧之前的最大 QP 步进。"
+
+#: modules/codec/x264.c:215
+msgid "Average bitrate tolerance"
+msgstr "平均位率公差"
+
+#: modules/codec/x264.c:216
+msgid "Allowed variance in average bitrate (in kbits/s)."
+msgstr "平均位率内允许的误差 (以 kbits/s 为单位)。"
+
+#: modules/codec/x264.c:219
+msgid "Max local bitrate"
+msgstr "最大本地位率"
+
+#: modules/codec/x264.c:220
+msgid "Sets a maximum local bitrate (in kbits/s)."
+msgstr "设置最大本地位率 (以 kbits/s 为位率)。"
+
+#: modules/codec/x264.c:222
+msgid "VBV buffer"
+msgstr "VBV 缓冲"
+
+#: modules/codec/x264.c:223
+msgid "Averaging period for the maximum local bitrate (in kbits)."
+msgstr "最大本地位率的平均周期 (以 kbits 为单位)。"
+
+#: modules/codec/x264.c:226
+msgid "Initial VBV buffer occupancy"
+msgstr "初始 VBV 缓冲占有期"
+
+#: modules/codec/x264.c:227
+msgid ""
+"Sets the initial buffer occupancy as a fraction of the buffer size. Range "
+"0.0 to 1.0."
+msgstr "设置初始缓存占有期作为缓存的一部分。范围从 0.0 到 1.0。"
+
+#: modules/codec/x264.c:230
+msgid "How AQ distributes bits"
+msgstr "AQ 如何发布位"
+
+#: modules/codec/x264.c:231
+msgid ""
+"Defines bitdistribution mode for AQ, default 1\n"
+" - 0: Disabled\n"
+" - 1: Current x264 default mode\n"
+" - 2: uses log(var)^2 instead of log(var) and attempts to adapt strength per "
+"frame"
+msgstr ""
+"定义 AQ 位分发模式，默认 1\n"
+" - 0: 禁用\n"
+" - 1: 当前 x264 的默认模式\n"
+" - 2: 使用 log(数值)^2 替代 log(数值) 并尝试适应各帧强度"
+
+#: modules/codec/x264.c:236
+msgid "Strength of AQ"
+msgstr "AQ 强度"
+
+#: modules/codec/x264.c:237
+msgid ""
+"Strength to reduce blocking and blurring in flat\n"
+"and textured areas, default 1.0 recommended to be between 0..2\n"
+" - 0.5: weak AQ\n"
+" - 1.5: strong AQ"
+msgstr ""
+"减轻块与模糊平面及纹理区域的强度，\n"
+"默认 1.0 推荐介于 0..2\n"
+" - 0.5: 弱 AQ\n"
+" - 1.5: 强 AQ"
+
+#: modules/codec/x264.c:243
+msgid "QP factor between I and P"
+msgstr "I 和 P 之间的 QP 因数"
+
+#: modules/codec/x264.c:244
+msgid "QP factor between I and P. Range 1.0 to 2.0."
+msgstr "在 I 和 P 之间的 QP 因数。范围从 1.0 到 2.0。"
+
+#: modules/codec/x264.c:247
+msgid "QP factor between P and B"
+msgstr "P 和 B 之间的 QP 因数"
+
+#: modules/codec/x264.c:248
+msgid "QP factor between P and B. Range 1.0 to 2.0."
+msgstr "在 P 和 B 之间的 QP 因数。范围从 1.0 到 2.0。"
+
+#: modules/codec/x264.c:250
+msgid "QP difference between chroma and luma"
+msgstr "在色度和亮度之间的差异"
+
+#: modules/codec/x264.c:251
+msgid "QP difference between chroma and luma."
+msgstr "在色度和亮度之间的差异。"
+
+#: modules/codec/x264.c:253
+msgid "Multipass ratecontrol"
+msgstr "多重编码码率控制"
+
+#: modules/codec/x264.c:254
+msgid ""
+"Multipass ratecontrol:\n"
+" - 1: First pass, creates stats file\n"
+" - 2: Last pass, does not overwrite stats file\n"
+" - 3: Nth pass, overwrites stats file\n"
+msgstr ""
+"多重编码码率控制:\n"
+" - 1: 一重, 创建状态文件\n"
+" - 2: 二重, 不覆盖状态文件\n"
+" - 3: 多重, 覆盖状态文件\n"
+
+#: modules/codec/x264.c:259
+msgid "QP curve compression"
+msgstr "QP 曲线压缩"
+
+#: modules/codec/x264.c:260
+msgid "QP curve compression. Range 0.0 (CBR) to 1.0 (QCP)."
+msgstr "QP 曲线压缩。范围从 0.0 (CBR) 到 1.0 (QCP)。"
+
+#: modules/codec/x264.c:262 modules/codec/x264.c:266
+msgid "Reduce fluctuations in QP"
+msgstr "减少 QP 波动"
+
+#: modules/codec/x264.c:263
+msgid ""
+"This reduces the fluctuations in QP before curve compression. Temporally "
+"blurs complexity."
+msgstr "这将减少在曲线压缩之前的 QP 波动。临时模糊的复杂性。"
+
+#: modules/codec/x264.c:267
+msgid ""
+"This reduces the fluctuations in QP after curve compression. Temporally "
+"blurs quants."
+msgstr "这在曲线压缩之后减少 QP 的波动。临时模糊突增。"
+
+#: modules/codec/x264.c:272
+msgid "Partitions to consider"
+msgstr "分割计算器"
+
+#: modules/codec/x264.c:273
+msgid ""
+"Partitions to consider in analyse mode: \n"
+" - none : \n"
+" - fast : i4x4\n"
+" - normal: i4x4,p8x8,(i8x8)\n"
+" - slow : i4x4,p8x8,(i8x8),b8x8\n"
+" - all : i4x4,p8x8,(i8x8),b8x8,p4x4\n"
+"(p4x4 requires p8x8. i8x8 requires 8x8dct)."
+msgstr ""
+"在分析模式中的分割计算器: \n"
+" - 无 : \n"
+" - 快速 : i4x4\n"
+" - 普通 : i4x4,p8x8,(i8x8)\n"
+" - 慢 : i4x4,p8x8,(i8x8),b8x8\n"
+" - 全部 : i4x4,p8x8,(i8x8),b8x8,p4x4\n"
+"(p4x4 需要 p8x8。i8x8 需要 8x8dct)。"
+
+#: modules/codec/x264.c:281
+msgid "Direct MV prediction mode"
+msgstr "直接 MV 预计模式"
+
+#: modules/codec/x264.c:284
+msgid "Direct prediction size"
+msgstr "直接预计大小"
+
+#: modules/codec/x264.c:285
+msgid ""
+"Direct prediction size: - 0: 4x4\n"
+" - 1: 8x8\n"
+" - -1: smallest possible according to level\n"
+msgstr ""
+"直接预计大小: - 0: 4x4\n"
+" - 1: 8x8\n"
+" - -1: 按照等级的最小可能\n"
+
+#: modules/codec/x264.c:290
+msgid "Weighted prediction for B-frames"
+msgstr "用于 B 帧的有利预计"
+
+#: modules/codec/x264.c:291
+msgid "Weighted prediction for B-frames."
+msgstr "用于 B 帧的有利预计。"
+
+#: modules/codec/x264.c:293
+msgid "Weighted prediction for P-frames"
+msgstr "P 帧加权预测"
+
+#: modules/codec/x264.c:294
+msgid ""
+" Weighted prediction for P-frames: - 0: Disabled\n"
+" - 1: Blind offset\n"
+" - 2: Smart analysis\n"
+msgstr ""
+" P 帧加权预测: - 0: 禁用\n"
+" - 1: 隐性补偿\n"
+" - 2: 智能分析\n"
+
+#: modules/codec/x264.c:299
+msgid "Integer pixel motion estimation method"
+msgstr "整数像素运动估计模式"
+
+#: modules/codec/x264.c:300
+msgid ""
+"Selects the motion estimation algorithm: - dia: diamond search, radius 1 "
+"(fast)\n"
+" - hex: hexagonal search, radius 2\n"
+" - umh: uneven multi-hexagon search (better but slower)\n"
+" - esa: exhaustive search (extremely slow, primarily for testing)\n"
+" - tesa: hadamard exhaustive search (extremely slow, primarily for testing)\n"
+msgstr ""
+"选择运动估计算法: - dia: 方块搜索, 半径为 1 (快)\n"
+" - hex: 六边形搜索, 半径为 2\n"
+" - umh: 不一致的多六边形搜索 (较佳但速度慢)\n"
+" - esa: 穷举搜索 (非常慢, 主要用于测试)\n"
+" - tesa: hadamard 穷举搜索 (非常慢, 主要用于测试)\n"
+
+#: modules/codec/x264.c:307
+msgid "Maximum motion vector search range"
+msgstr "最大运动向量搜索范围"
+
+#: modules/codec/x264.c:308
+msgid ""
+"Maximum distance to search for motion estimation, measured from predicted "
+"position(s). Default of 16 is good for most footage, high motion sequences "
+"may benefit from settings between 24 and 32. Range 0 to 64."
+msgstr ""
+"运动估算搜索的最大距离，较慎重的预测点。默认的 16 适合大多数的距离，高连续动"
+"态场景可以设置为 24 和 32。范围是 0 到 64。"
+
+#: modules/codec/x264.c:313
+msgid "Maximum motion vector length"
+msgstr "最大运动向量长度"
+
+#: modules/codec/x264.c:314
+msgid ""
+"Maximum motion vector length in pixels. -1 is automatic, based on level."
+msgstr "以像素为单位的最大运动向量长度。-1 是自动，基于等级。"
+
+#: modules/codec/x264.c:317
+msgid "Minimum buffer space between threads"
+msgstr "线程之间的最小缓存空间"
+
+#: modules/codec/x264.c:318
+msgid ""
+"Minimum buffer space between threads. -1 is automatic, based on number of "
+"threads."
+msgstr "线程之间的最小缓冲空间。-1 是自动，基于线程数量。"
+
+#: modules/codec/x264.c:321
+msgid "Strength of psychovisual optimization, default is \"1.0:0.0\""
+msgstr "疯狂视觉优化的强度，默认为 \"1.0:0.0\""
+
+#: modules/codec/x264.c:322
+msgid ""
+"First parameter controls if RD is on (subme>=6) or off.\n"
+"Second parameter controls if Trellis is used on psychovisual optimization, "
+"default off"
+msgstr ""
+"第一个参数控制是否启用 RD (subme>=6)。\n"
+"第二个参数控制心理视觉优化是否使用 Trellis，默认关闭"
+
+#: modules/codec/x264.c:326
+msgid "Subpixel motion estimation and partition decision quality"
+msgstr "子像素运动估计和切割确定质量"
+
+#: modules/codec/x264.c:328
+msgid ""
+"This parameter controls quality versus speed tradeoffs involved in the "
+"motion estimation decision process (lower = quicker and higher = better "
+"quality). Range 1 to 9."
+msgstr ""
+"此参数控制了在运动估计处理过程中的质量与速度比 (较低 = 快速和高质量 = 较佳的"
+"质量)。范围是 1 到 9。"
+
+#: modules/codec/x264.c:332
+msgid "RD based mode decision for B-frames. This requires subme 6 (or higher)."
+msgstr "为 B 帧 RD 基于模式判断。这需要 subme 6 (或更高)。"
+
+#: modules/codec/x264.c:335
+msgid "Decide references on a per partition basis"
+msgstr "在一个每分割基础上判断参考"
+
+#: modules/codec/x264.c:336
+msgid ""
+"Allows each 8x8 or 16x8 partition to independently select a reference frame, "
+"as opposed to only one ref per macroblock."
+msgstr ""
+"允许每 8x8 或 16x8 的分割独立的选择一个参考帧，相反的每个预宏块只有一个参考"
+"帧。"
+
+#: modules/codec/x264.c:340
+msgid "Chroma in motion estimation"
+msgstr "动态估算中的色度"
+
+#: modules/codec/x264.c:341
+msgid "Chroma ME for subpel and mode decision in P-frames."
+msgstr "在 P 帧中的用于 subpel 和模式确定的色度 ME。"
+
+#: modules/codec/x264.c:344
+msgid "Joint bidirectional motion refinement."
+msgstr "联合双向动态优化。"
+
+#: modules/codec/x264.c:346
+msgid "Adaptive spatial transform size"
+msgstr "适应空间改版大小"
+
+#: modules/codec/x264.c:348
+msgid "SATD-based decision for 8x8 transform in inter-MBs."
+msgstr "用于 inter-MB 中的 8x8 的传输中的基于 SATD 的判断。"
+
+#: modules/codec/x264.c:350
+msgid "Trellis RD quantization"
+msgstr "格式 RD 量化"
+
+#: modules/codec/x264.c:351
+msgid ""
+"Trellis RD quantization: \n"
+" - 0: disabled\n"
+" - 1: enabled only on the final encode of a MB\n"
+" - 2: enabled on all mode decisions\n"
+"This requires CABAC."
+msgstr ""
+"格式 RD 量化: \n"
+" - 0: 关闭\n"
+" - 1: 仅在编码最后一个 MB 时开启\n"
+" - 2: 在所有模式判断时开启\n"
+"这需要 CABAC。"
+
+#: modules/codec/x264.c:357
+msgid "Early SKIP detection on P-frames"
+msgstr "在 P 帧上的早期跳过检测"
+
+#: modules/codec/x264.c:358
+msgid "Early SKIP detection on P-frames."
+msgstr "在 P 帧上的早期跳过检测。"
+
+#: modules/codec/x264.c:360
+msgid "Coefficient thresholding on P-frames"
+msgstr "P 帧的阀系数"
+
+#: modules/codec/x264.c:361
+msgid ""
+"Coefficient thresholding on P-frames.Eliminate dct blocks containing only a "
+"small single coefficient."
+msgstr "P 帧上的阀系数。消除 dct 块仅包含一个小的单一系数。"
+
+#: modules/codec/x264.c:364
+msgid "Use Psy-optimizations"
+msgstr "使用疯狂视觉优化"
+
+#: modules/codec/x264.c:365
+msgid "Use all visual optimizations that can worsen both PSNR and SSIM"
+msgstr "使用所有可能同时恶化 PSNR 与 SSIM 的视觉优化"
+
+#: modules/codec/x264.c:369
+msgid ""
+"Dct-domain noise reduction. Adaptive pseudo-deadzone. 10 to 1000 seems to be "
+"a useful range."
+msgstr "Dct-域噪点消除。适应伪造的死区。10 到 1000 看上去是一个有用的范围。"
+
+#: modules/codec/x264.c:372
+msgid "Inter luma quantization deadzone"
+msgstr "Inter 亮度量化死区"
+
+#: modules/codec/x264.c:373
+msgid "Set the size of the inter luma quantization deadzone. Range 0 to 32."
+msgstr "设置 inter 量化死区的大小。范围是 0 到 32。"
+
+#: modules/codec/x264.c:376
+msgid "Intra luma quantization deadzone"
+msgstr "Intra 亮度量化死区"
+
+#: modules/codec/x264.c:377
+msgid "Set the size of the intra luma quantization deadzone. Range 0 to 32."
+msgstr "设置 intra 量化死区的大小。范围是 0 到 32。"
+
+#: modules/codec/x264.c:382
+msgid "Non-deterministic optimizations when threaded"
+msgstr "在线程中的非确定性优化"
+
+#: modules/codec/x264.c:383
+msgid "Slightly improve quality of SMP, at the cost of repeatability."
+msgstr "以可重复性为代价轻微改进 SMP 的质量。"
+
+#: modules/codec/x264.c:386
+msgid "CPU optimizations"
+msgstr "CPU 优化"
+
+#: modules/codec/x264.c:387
+msgid "Use assembler CPU optimizations."
+msgstr "使用汇编 CPU 优化。"
+
+#: modules/codec/x264.c:389
+msgid "Filename for 2 pass stats file"
+msgstr "2 重状态文件名"
+
+#: modules/codec/x264.c:390
+msgid "Filename for 2 pass stats file for multi-pass encoding."
+msgstr "用于多重编码的 2 重状态文件文件名。"
+
+#: modules/codec/x264.c:392
+msgid "PSNR computation"
+msgstr "PSNR 计算"
+
+#: modules/codec/x264.c:393
+msgid ""
+"Compute and print PSNR stats. This has no effect on the actual encoding "
+"quality."
+msgstr "计算并打印 PSNR 状态。这不会影响实际编码质量。"
+
+#: modules/codec/x264.c:396
+msgid "SSIM computation"
+msgstr "SSIM 计算"
+
+#: modules/codec/x264.c:397
+msgid ""
+"Compute and print SSIM stats. This has no effect on the actual encoding "
+"quality."
+msgstr "计算并打印 SSIM 状态。这不会影响实际编码质量。"
+
+#: modules/codec/x264.c:400
+msgid "Quiet mode"
+msgstr "静默模式"
+
+#: modules/codec/x264.c:402 modules/gui/macosx/playlistinfo.m:80
+#: modules/gui/qt4/ui/streampanel.h:171
+msgid "Statistics"
+msgstr "统计"
+
+#: modules/codec/x264.c:403
+msgid "Print stats for each frame."
+msgstr "打印每帧的状态。"
+
+#: modules/codec/x264.c:405
+msgid "SPS and PPS id numbers"
+msgstr "SPS 和 PPS id 号"
+
+#: modules/codec/x264.c:406
+msgid ""
+"Set SPS and PPS id numbers to allow concatenating streams with different "
+"settings."
+msgstr "设置 SPS 和 PPS id 号以允许用不同的设置连接流。"
+
+#: modules/codec/x264.c:409
+msgid "Access unit delimiters"
+msgstr "访问单元分隔符"
+
+#: modules/codec/x264.c:410
+msgid "Generate access unit delimiter NAL units."
+msgstr "生成反问单元分隔符 NAL 单元。"
+
+#: modules/codec/x264.c:412
+msgid "Framecount to use on frametype lookahead"
+msgstr "统计帧数以供帧类预测"
+
+#: modules/codec/x264.c:413
+msgid ""
+"Framecount to use on frametype lookahead. Currently default can cause sync-"
+"issues on unmuxable output, like rtsp-output without ts-mux"
+msgstr ""
+"统计帧数以供帧类预测。当前默认可导致不可混流的输出的同步问题，如无 ts 复用的 "
+"rtsp 输出"
+
+#: modules/codec/x264.c:416
+msgid "HRD-timing information"
+msgstr "HRD 计时信息"
+
+#: modules/codec/x264.c:417
+msgid "Default tune setting used"
+msgstr "已使用默认调谐器设置"
+
+#: modules/codec/x264.c:418
+msgid "Default preset setting used"
+msgstr "已使用默认预设设置"
+
+#: modules/codec/x264.c:420
+msgid "x264 advanced options."
+msgstr "x264 高级选项。"
+
+#: modules/codec/x264.c:421
+msgid "x264 advanced options, in the form {opt=val,op2=val2} ."
+msgstr "x264 高级选项，格式为 {选项=值,选项2=值2} 。"
+
+#: modules/codec/x264.c:426
+msgid "dia"
+msgstr "dia"
+
+#: modules/codec/x264.c:426
+msgid "hex"
+msgstr "hex"
+
+#: modules/codec/x264.c:426
+msgid "umh"
+msgstr "umh"
+
+#: modules/codec/x264.c:426
+msgid "esa"
+msgstr "esa"
+
+#: modules/codec/x264.c:426
+msgid "tesa"
+msgstr "tesa"
+
+#: modules/codec/x264.c:437
+msgid "Fast"
+msgstr "快"
+
+#: modules/codec/x264.c:437 modules/gui/macosx/MainMenu.m:368
+#: modules/gui/macosx/simple_prefs.m:705
+#: modules/gui/qt4/components/simple_preferences.cpp:689
+#: modules/misc/gnutls.c:64 modules/text_renderer/freetype.c:136
+#: modules/text_renderer/freetype.c:155 modules/text_renderer/quartztext.c:121
+#: modules/text_renderer/win32text.c:82
+msgid "Normal"
+msgstr "普通"
+
+#: modules/codec/x264.c:437
+msgid "Slow"
+msgstr "慢"
+
+#: modules/codec/x264.c:442
+msgid "Spatial"
+msgstr "空间"
+
+#: modules/codec/x264.c:442 modules/hw/vdpau/chroma.c:820
+msgid "Temporal"
+msgstr "时间"
+
+#: modules/codec/x264.c:447
+msgid "checkerboard"
+msgstr "棋盘"
+
+#: modules/codec/x264.c:447
+msgid "column alternation"
+msgstr "列调整"
+
+#: modules/codec/x264.c:447
+msgid "row alternation"
+msgstr "行调整"
+
+#: modules/codec/x264.c:447
+msgid "side by side"
+msgstr "左右模式"
+
+#: modules/codec/x264.c:447
+msgid "top bottom"
+msgstr "上下模式"
+
+#: modules/codec/x264.c:447
+msgid "frame alternation"
+msgstr "帧调整"
+
+#: modules/codec/x264.c:451
+msgid "H.264/MPEG-4 Part 10/AVC encoder (x264 10-bit)"
+msgstr "H.264/MPEG-4 Part 10/AVC 编码器 (x264 10-bit)"
+
+#: modules/codec/x264.c:455
+#, fuzzy
+msgid "H.262/MPEG-2 encoder (x262)"
+msgstr "H.264/MPEG-4 Part 10/AVC 编码器 (x264)"
+
+#: modules/codec/x264.c:459
+msgid "H.264/MPEG-4 Part 10/AVC encoder (x264)"
+msgstr "H.264/MPEG-4 Part 10/AVC 编码器 (x264)"
+
+#: modules/codec/x265.c:45
+#, fuzzy
+msgid "H.265/HEVC encoder (x265)"
+msgstr "H.264/MPEG-4 Part 10/AVC 编码器 (x264)"
+
+#: modules/codec/xwd.c:36
+msgid "XWD image decoder"
+msgstr "XWD 图像解码器"
+
+#: modules/codec/zvbi.c:61
+msgid "Teletext page"
+msgstr "Teletext 页"
+
+#: modules/codec/zvbi.c:62
+msgid "Open the indicated Teletext page.Default page is index 100"
+msgstr "打开可能的 Teletext 页。默认的页是索引 100"
+
+#: modules/codec/zvbi.c:65 modules/gui/qt4/dialogs/toolbar.cpp:504
+msgid "Teletext transparency"
+msgstr "Teletext 透明度"
+
+#: modules/codec/zvbi.c:66
+#, fuzzy
+msgid ""
+"Setting vbi-opaque to true makes the text to be boxed and maybe easier to "
+"read."
+msgstr "设置 vbi 不透明为否使得边框话的文本透明。"
+
+#: modules/codec/zvbi.c:69
+msgid "Teletext alignment"
+msgstr "Teletext 排列"
+
+#: modules/codec/zvbi.c:71
+msgid ""
+"You can enforce the teletext position on the video (0=center, 1=left, "
+"2=right, 4=top, 8=bottom, you can also use combinations of these values, eg. "
+"6 = top-right)."
+msgstr ""
+"您可以强制指定 teletext 在视频上的位置 (0=居中、1=左、2=右、4=上、8=下，您也"
+"可以混合使用这些值，例如 6 = 右上)。"
+
+#: modules/codec/zvbi.c:75
+msgid "Teletext text subtitles"
+msgstr "Teletext 文本字幕"
+
+#: modules/codec/zvbi.c:76
+msgid "Output teletext subtitles as text instead of as RGBA"
+msgstr "将 teletext 字幕作为文本输出代替 RGBA"
+
+#: modules/codec/zvbi.c:85
+msgid "VBI and Teletext decoder"
+msgstr "VBI 和 Teletext 解码器"
+
+#: modules/codec/zvbi.c:86
+msgid "VBI & Teletext"
+msgstr "VBI 和 Teletext"
+
+#: modules/control/dbus/dbus.c:148
+msgid "DBus"
+msgstr "DBus"
+
+#: modules/control/dbus/dbus.c:150
+msgid "D-Bus control interface"
+msgstr "D-Bus 控制界面"
+
+#: modules/control/dbus/dbus_root.c:81 modules/gui/macosx/MainWindow.m:207
+#: modules/gui/macosx/MainWindow.m:712 modules/gui/macosx/MainWindow.m:718
+#: modules/gui/macosx/MainWindow.m:1332 modules/gui/ncurses.c:1041
+#: modules/gui/qt4/dialogs/help.cpp:91 modules/gui/qt4/main_interface.cpp:1027
+#: modules/gui/qt4/main_interface.cpp:1031
+#: modules/gui/qt4/main_interface.cpp:1070
+#: modules/gui/qt4/main_interface.cpp:1072
+#: modules/gui/qt4/main_interface.cpp:1180
+#: modules/gui/qt4/main_interface.cpp:1197
+#: modules/gui/qt4/main_interface.cpp:1205
+#: modules/gui/qt4/main_interface.cpp:1228 modules/lua/libs/httpd.c:80
+#: modules/notify/growl.m:281 modules/video_output/xcb/window.c:313
+msgid "VLC media player"
+msgstr "VLC media player"
+
+#: modules/control/dummy.c:37 modules/control/rc.c:175
+msgid "Do not open a DOS command box interface"
+msgstr "不打开 DOS 命令行界面"
+
+#: modules/control/dummy.c:39
+msgid ""
+"By default the dummy interface plugin will start a DOS command box. Enabling "
+"the quiet mode will not bring this command box but can also be pretty "
+"annoying when you want to stop VLC and no video window is open."
+msgstr ""
+"按默认空界面插件将会启动一个 DOS 命令行窗口。开启静默模式将不会产生此命令窗口"
+"但是也可能使您在没有视频窗口打开的情况下想关闭 VLC 时遇到麻烦。"
+
+#: modules/control/dummy.c:49
+msgid "Dummy interface"
+msgstr "空界面"
+
+#: modules/control/gestures.c:71
+msgid "Motion threshold (10-100)"
+msgstr "运动限制 (10-100)"
+
+#: modules/control/gestures.c:73
+msgid "Amount of movement required for a mouse gesture to be recorded."
+msgstr "用于录制鼠标手势所需的移动数量。"
+
+#: modules/control/gestures.c:75
+msgid "Trigger button"
+msgstr "触发按钮"
+
+#: modules/control/gestures.c:77
+msgid "Trigger button for mouse gestures."
+msgstr "用于鼠标手势的触发按钮。"
+
+#: modules/control/gestures.c:83
+msgid "Middle"
+msgstr "中"
+
+#: modules/control/gestures.c:86
+msgid "Gestures"
+msgstr "手势"
+
+#: modules/control/gestures.c:94
+msgid "Mouse gestures control interface"
+msgstr "鼠标手势控制界面"
+
+#: modules/control/globalhotkeys/win32.c:46
+#: modules/control/globalhotkeys/xcb.c:49
+#: modules/gui/qt4/components/preferences_widgets.cpp:1144
+msgid "Global Hotkeys"
+msgstr "全局热键"
+
+#: modules/control/globalhotkeys/win32.c:49
+#: modules/control/globalhotkeys/xcb.c:52
+msgid "Global Hotkeys interface"
+msgstr "全局热键界面"
+
+#: modules/control/hotkeys.c:88 modules/gui/macosx/simple_prefs.m:279
+#: modules/gui/qt4/components/preferences_widgets.cpp:1143
+#: modules/gui/qt4/components/simple_preferences.cpp:280
+msgid "Hotkeys"
+msgstr "热键"
+
+#: modules/control/hotkeys.c:89
+msgid "Hotkeys management interface"
+msgstr "热键管理界面"
+
+#: modules/control/hotkeys.c:188
+msgid "One"
+msgstr "一"
+
+#: modules/control/hotkeys.c:195
+#, c-format
+msgid "Loop: %s"
+msgstr "循环: %s"
+
+#: modules/control/hotkeys.c:202
+#, c-format
+msgid "Random: %s"
+msgstr "随机: %s"
+
+#: modules/control/hotkeys.c:331
+#, c-format
+msgid "Audio Device: %s"
+msgstr "音频设备: %s"
+
+#: modules/control/hotkeys.c:394
+msgid "Recording"
+msgstr "正在录制"
+
+#: modules/control/hotkeys.c:394
+msgid "Recording done"
+msgstr "录制完成"
+
+#: modules/control/hotkeys.c:409
+msgid "Sub sync: bookmarked audio time"
+msgstr "字幕同步: 已将音频时间加入书签"
+
+#: modules/control/hotkeys.c:424 modules/control/hotkeys.c:493
+msgid "No active subtitle"
+msgstr "无活动字幕"
+
+#: modules/control/hotkeys.c:430
+msgid "Sub sync: bookmarked subtitle time"
+msgstr "字幕同步: 已将字幕时间加入书签"
+
+#: modules/control/hotkeys.c:450
+msgid "Sub sync: set bookmarks first!"
+msgstr "字幕同步: 请先设置书签!"
+
+#: modules/control/hotkeys.c:459
+#, c-format
+msgid "Sub sync: corrected %i ms (total delay = %i ms)"
+msgstr "字幕同步: 已纠正 %i ms (总 = %i ms)"
+
+#: modules/control/hotkeys.c:472
+msgid "Sub sync: delay reset"
+msgstr "字幕同步: 延时重置"
+
+#: modules/control/hotkeys.c:501
+#, c-format
+msgid "Subtitle delay %i ms"
+msgstr "字幕延迟 %i 毫秒"
+
+#: modules/control/hotkeys.c:517
+#, c-format
+msgid "Audio delay %i ms"
+msgstr "音频延迟 %i 毫秒"
+
+#: modules/control/hotkeys.c:553
+#, c-format
+msgid "Audio track: %s"
+msgstr "音轨: %s"
+
+#: modules/control/hotkeys.c:571 modules/control/hotkeys.c:595
+#, c-format
+msgid "Subtitle track: %s"
+msgstr "字幕轨道: %s"
+
+#: modules/control/hotkeys.c:572 modules/control/hotkeys.c:614
+msgid "N/A"
+msgstr "不可用"
+
+#: modules/control/hotkeys.c:613 modules/control/hotkeys.c:645
+#, c-format
+msgid "Program Service ID: %s"
+msgstr "节目服务 ID: %s"
+
+#: modules/control/hotkeys.c:773
+#, c-format
+msgid "Aspect ratio: %s"
+msgstr "高宽比: %s"
+
+#: modules/control/hotkeys.c:803
+#, c-format
+msgid "Crop: %s"
+msgstr "裁剪: %s"
+
+#: modules/control/hotkeys.c:851
+msgid "Zooming reset"
+msgstr "放大复位"
+
+#: modules/control/hotkeys.c:858
+msgid "Scaled to screen"
+msgstr "缩放至屏幕"
+
+#: modules/control/hotkeys.c:860
+msgid "Original Size"
+msgstr "原始大小"
+
+#: modules/control/hotkeys.c:929
+#, c-format
+msgid "Zoom mode: %s"
+msgstr "缩放模式: %s"
+
+#: modules/control/hotkeys.c:944 modules/control/hotkeys.c:1001
+msgid "Deinterlace off"
+msgstr "反交错关闭"
+
+#: modules/control/hotkeys.c:963 modules/control/hotkeys.c:996
+msgid "Deinterlace on"
+msgstr "反交错开启"
+
+#: modules/control/hotkeys.c:1026
+msgid "Subtitle position: no active subtitle"
+msgstr "字幕位置: 无活动字幕"
+
+#: modules/control/hotkeys.c:1038
+#, c-format
+msgid "Subtitle position %d px"
+msgstr "字幕位置 %d px"
+
+#: modules/control/hotkeys.c:1172
+#, c-format
+msgid "Volume %ld%%"
+msgstr "音量 %ld%%"
+
+#: modules/control/hotkeys.c:1177
+#, c-format
+msgid "Speed: %.2fx"
+msgstr "速度: %.2fx"
+
+#: modules/control/lirc.c:46
+msgid "Change the lirc configuration file"
+msgstr "更改 lirc 配置文件"
+
+#: modules/control/lirc.c:48
+msgid ""
+"Tell lirc to read this configuration file. By default it searches in the "
+"users home directory."
+msgstr "告诉 lirc 读取此配置文件。按默认它将在用户的 home 目录中搜索。"
+
+#: modules/control/lirc.c:58
+msgid "Infrared"
+msgstr "红外线"
+
+#: modules/control/lirc.c:61
+msgid "Infrared remote control interface"
+msgstr "红外线远程控制界面"
+
+#: modules/control/motion.c:65
+msgid "motion"
+msgstr "运动"
+
+#: modules/control/motion.c:68
+msgid "motion control interface"
+msgstr "使用运动控制界面"
+
+#: modules/control/motion.c:69 modules/video_filter/rotate.c:57
+msgid ""
+"Use HDAPS, AMS, APPLESMC or UNIMOTION motion sensors to rotate the video"
+msgstr "使用 HDAPS, AMS, APPLESMC 或 UNIMOTION 运动传感器旋转视频"
+
+#: modules/control/netsync.c:55
+msgid "Network master clock"
+msgstr "网络主时钟"
+
+#: modules/control/netsync.c:56
+msgid ""
+"When set, this VLC instance will act as the master clock for synchronization "
+"for clients listening"
+msgstr "设置后，此 VLC 实例将作为主同步时钟供客户端侦听"
+
+#: modules/control/netsync.c:60
+msgid "Master server ip address"
+msgstr "主服务器 ip 地址"
+
+#: modules/control/netsync.c:61
+msgid ""
+"The IP address of the network master clock to use for clock synchronization."
+msgstr "用于时钟同步的网络主时钟的 IP 地址。"
+
+#: modules/control/netsync.c:64
+msgid "UDP timeout (in ms)"
+msgstr "UDP 超时 (毫秒)"
+
+#: modules/control/netsync.c:65
+msgid "Length of time (in ms) until aborting data reception."
+msgstr "在放弃网络数据接收前等待的时间长度（单位为毫秒）。"
+
+#: modules/control/netsync.c:69
+msgid "Network Sync"
+msgstr "网络同步"
+
+#: modules/control/netsync.c:70
+msgid "Network synchronization"
+msgstr "网络同步"
+
+#: modules/control/ntservice.c:44
+msgid "Install Windows Service"
+msgstr "安装 Windows 服务"
+
+#: modules/control/ntservice.c:46
+msgid "Install the Service and exit."
+msgstr "安装服务并退出。"
+
+#: modules/control/ntservice.c:47
+msgid "Uninstall Windows Service"
+msgstr "卸载 Windows 服务"
+
+#: modules/control/ntservice.c:49
+msgid "Uninstall the Service and exit."
+msgstr "卸载 服务并退出。"
+
+#: modules/control/ntservice.c:50
+msgid "Display name of the Service"
+msgstr "显示服务名称"
+
+#: modules/control/ntservice.c:52
+msgid "Change the display name of the Service."
+msgstr "更改服务的显示名称。"
+
+#: modules/control/ntservice.c:53
+msgid "Configuration options"
+msgstr "设置选项"
+
+#: modules/control/ntservice.c:55
+msgid ""
+"Configuration options that will be used by the Service (eg. --foo=bar --no-"
+"foobar). It should be specified at install time so the Service is properly "
+"configured."
+msgstr ""
+"设置将被服务使用的设置选项 (例如 --foo=bar -- no- foobar)。它应该在安装时指"
+"定，这样服务才能被正确配置。"
+
+#: modules/control/ntservice.c:60
+msgid ""
+"Additional interfaces spawned by the Service. It should be specified at "
+"install time so the Service is properly configured. Use a comma separated "
+"list of interface modules. (common values are: logger, sap, rc, http)"
+msgstr ""
+"服务附属的附加界面。它应该在安装时指定，这样服务才能被正确配置。使用一个逗号"
+"分隔的界面列表。(公共值是: logger, sap, rc, http)"
+
+#: modules/control/ntservice.c:66
+msgid "NT Service"
+msgstr "NT 服务"
+
+#: modules/control/ntservice.c:67
+msgid "Windows Service interface"
+msgstr "Windows 服务界面"
+
+#: modules/control/rc.c:68
+msgid "Initializing"
+msgstr "正在初始化"
+
+#: modules/control/rc.c:69
+msgid "Opening"
+msgstr "正在打开"
+
+#: modules/control/rc.c:73
+msgid "Error"
+msgstr "错误"
+
+#: modules/control/rc.c:159
+msgid "Show stream position"
+msgstr "显示流位置"
+
+#: modules/control/rc.c:160
+msgid ""
+"Show the current position in seconds within the stream from time to time."
+msgstr "显示在流中的当前位置。"
+
+#: modules/control/rc.c:163
+msgid "Fake TTY"
+msgstr "伪装 TTY"
+
+#: modules/control/rc.c:164
+msgid "Force the rc module to use stdin as if it was a TTY."
+msgstr "强制 rc 模块使用 stdin，就好比它是个 TTY。"
+
+#: modules/control/rc.c:166
+msgid "UNIX socket command input"
+msgstr "UNIX 端口命令输入"
+
+#: modules/control/rc.c:167
+msgid "Accept commands over a Unix socket rather than stdin."
+msgstr "尝试通过 Unix 端口输入命令。"
+
+#: modules/control/rc.c:170 modules/lua/vlc.c:70
+msgid "TCP command input"
+msgstr "TCP 命令输入"
+
+#: modules/control/rc.c:171 modules/lua/vlc.c:71
+msgid ""
+"Accept commands over a socket rather than stdin. You can set the address and "
+"port the interface will bind to."
+msgstr "尝试通过一个端口输入命令。您可以设置地址和界面将被绑定的端口。"
+
+#: modules/control/rc.c:177
+msgid ""
+"By default the rc interface plugin will start a DOS command box. Enabling "
+"the quiet mode will not bring this command box but can also be pretty "
+"annoying when you want to stop VLC and no video window is open."
+msgstr ""
+"在默认情况下 rc 接口插件将会启动一个 DOS 命令行窗口。开启静默模式将不会出现此"
+"命令窗口但是也可能在您希望在没有打开视频窗口时停止 VLC 的时候导致麻烦。"
+
+#: modules/control/rc.c:184
+msgid "RC"
+msgstr "RC"
+
+#: modules/control/rc.c:187
+msgid "Remote control interface"
+msgstr "远程控制界面"
+
+#: modules/control/rc.c:352
+msgid "Remote control interface initialized. Type `help' for help."
+msgstr "已初始化的远程控制界面。输入 `help' 获取帮助。 "
+
+#: modules/control/rc.c:764
+#, c-format
+msgid "Unknown command `%s'. Type `help' for help."
+msgstr "未知的命令 `%s'。输入 `help' 获取帮助。 "
+
+#: modules/control/rc.c:782
+msgid "+----[ Remote control commands ]"
+msgstr "+----[ 远程控制命令 ]"
+
+#: modules/control/rc.c:784
+msgid "| add XYZ . . . . . . . . . . . . add XYZ to playlist"
+msgstr "| add XYZ . . . . . . . . . . . . 添加 XYZ 到播放列表"
+
+#: modules/control/rc.c:785
+msgid "| enqueue XYZ . . . . . . . . . queue XYZ to playlist"
+msgstr "| enqueue XYZ . . . . . . . . . 加入 XYZ 到队列"
+
+#: modules/control/rc.c:786
+msgid "| playlist . . . . . show items currently in playlist"
+msgstr "| playlist . . . . . 显示当前播放列表中的项目"
+
+#: modules/control/rc.c:787
+msgid "| play . . . . . . . . . . . . . . . . . . play stream"
+msgstr "| play . . . . . . . . . . . . . . . . . . 播放流"
+
+#: modules/control/rc.c:788
+msgid "| stop . . . . . . . . . . . . . . . . . . stop stream"
+msgstr "| stop . . . . . . . . . . . . . . . . . . 停止流"
+
+#: modules/control/rc.c:789
+msgid "| next . . . . . . . . . . . . . . next playlist item"
+msgstr "| next . . . . . . . . . . . . . . 下一个播放列表项目"
+
+#: modules/control/rc.c:790
+msgid "| prev . . . . . . . . . . . . previous playlist item"
+msgstr "| prev . . . . . . . . . . . . 上一个播放列表项目"
+
+#: modules/control/rc.c:791
+msgid "| goto . . . . . . . . . . . . . . goto item at index"
+msgstr "| goto . . . . . . . . . . . . . . 转到索引中的项目"
+
+#: modules/control/rc.c:792
+msgid "| repeat [on|off] . . . . toggle playlist item repeat"
+msgstr "| repeat [on|off] . . . . 切换播放列表项目重复"
+
+#: modules/control/rc.c:793
+msgid "| loop [on|off] . . . . . . . . . toggle playlist loop"
+msgstr "| loop [on|off] . . . . . . . . . 切换播放列表循环"
+
+#: modules/control/rc.c:794
+msgid "| random [on|off] . . . . . . . toggle random jumping"
+msgstr "| random [on|off] . . . . . . . 切换随机跳转"
+
+#: modules/control/rc.c:795
+msgid "| clear . . . . . . . . . . . . . . clear the playlist"
+msgstr "| clear . . . . . . . . . . . . . . 清除播放列表"
+
+#: modules/control/rc.c:796
+msgid "| status . . . . . . . . . . . current playlist status"
+msgstr "| status . . . . . . . . . . . 当前的播放列表状态"
+
+#: modules/control/rc.c:797
+msgid "| title [X] . . . . . . set/get title in current item"
+msgstr "| title [X] . . . . . . 设置/获取当前的项目"
+
+#: modules/control/rc.c:798
+msgid "| title_n . . . . . . . . next title in current item"
+msgstr "| title_n . . . . . . . . 当前项目的下一个标题"
+
+#: modules/control/rc.c:799
+msgid "| title_p . . . . . . previous title in current item"
+msgstr "| title_p . . . . . . 当前项目的上一个标题"
+
+#: modules/control/rc.c:800
+msgid "| chapter [X] . . . . set/get chapter in current item"
+msgstr "| chapter [X] . . . . 设置获取当前项目的章节"
+
+#: modules/control/rc.c:801
+msgid "| chapter_n . . . . . . next chapter in current item"
+msgstr "| chapter_n . . . . . . 当前项目的下一个章节"
+
+#: modules/control/rc.c:802
+msgid "| chapter_p . . . . previous chapter in current item"
+msgstr "| chapter_p . . . . 当前项目的上一个章节"
+
+#: modules/control/rc.c:804
+msgid "| seek X . . . seek in seconds, for instance `seek 12'"
+msgstr "| seek X . . . 以秒搜索, 例如 `seek 12'"
+
+#: modules/control/rc.c:805
+msgid "| pause . . . . . . . . . . . . . . . . toggle pause"
+msgstr "| pause . . . . . . . . . . . . . . . . 切换暂停"
+
+#: modules/control/rc.c:806
+msgid "| fastforward . . . . . . . . . set to maximum rate"
+msgstr "| fastforward . . . . . . . . . 设置最大率"
+
+#: modules/control/rc.c:807
+msgid "| rewind . . . . . . . . . . . . set to minimum rate"
+msgstr "| rewind . . . . . . . . . . . . 设置最小率"
+
+#: modules/control/rc.c:808
+msgid "| faster . . . . . . . . . . faster playing of stream"
+msgstr "| faster . . . . . . . . . . 快速播放流"
+
+#: modules/control/rc.c:809
+msgid "| slower . . . . . . . . . . slower playing of stream"
+msgstr "| slower . . . . . . . . . . 慢速播放流"
+
+#: modules/control/rc.c:810
+msgid "| normal . . . . . . . . . . normal playing of stream"
+msgstr "| normal . . . . . . . . . . 普通播放流"
+
+#: modules/control/rc.c:811
+msgid "| frame. . . . . . . . . . play frame by frame"
+msgstr "| 帧 . . . . . . . . . . 逐帧播放"
+
+#: modules/control/rc.c:812
+msgid "| f [on|off] . . . . . . . . . . . . toggle fullscreen"
+msgstr "| f [on|off] . . . . . . . . . . . . 切换全屏幕"
+
+#: modules/control/rc.c:813
+msgid "| info . . . . . information about the current stream"
+msgstr "| info . . . . . 当前流的信息"
+
+#: modules/control/rc.c:814
+msgid "| stats . . . . . . . . show statistical information"
+msgstr "| stats . . . . . . . . 显示统计信息"
+
+#: modules/control/rc.c:815
+msgid "| get_time . . seconds elapsed since stream's beginning"
+msgstr "| get_time . . 从流开始时经过的秒数"
+
+#: modules/control/rc.c:816
+msgid "| is_playing . . . . 1 if a stream plays, 0 otherwise"
+msgstr "| is_playing . . . . 如果流在播放为 1, 否则为 0"
+
+#: modules/control/rc.c:817
+msgid "| get_title . . . . . the title of the current stream"
+msgstr "| get_title . . . . . 当前流的标题"
+
+#: modules/control/rc.c:818
+msgid "| get_length . . . . the length of the current stream"
+msgstr "| get_length . . . . 当前流的长度"
+
+#: modules/control/rc.c:820
+msgid "| volume [X] . . . . . . . . . . set/get audio volume"
+msgstr "| volume [X] . . . . . . . . . . 设置/获取音频音量"
+
+#: modules/control/rc.c:821
+msgid "| volup [X] . . . . . . . raise audio volume X steps"
+msgstr "| volup [X] . . . . . . . 提升音频音量 X 级"
+
+#: modules/control/rc.c:822
+msgid "| voldown [X] . . . . . . lower audio volume X steps"
+msgstr "| voldown [X] . . . . . . 降低音频音量 X 级"
+
+#: modules/control/rc.c:823
+msgid "| adev [device] . . . . . . . . set/get audio device"
+msgstr "| adev [设备] . . . . . . . . 设置/获取音频设备"
+
+#: modules/control/rc.c:824
+msgid "| achan [X]. . . . . . . . . . set/get audio channels"
+msgstr "| achan [X]. . . . . . . . . . 设置/获取声道"
+
+#: modules/control/rc.c:825
+msgid "| atrack [X] . . . . . . . . . . . set/get audio track"
+msgstr "| atrack [X] . . . . . . . . . . . 设置/获取音轨"
+
+#: modules/control/rc.c:826
+msgid "| vtrack [X] . . . . . . . . . . . set/get video track"
+msgstr "| vtrack [X] . . . . . . . . . . . 设置/获取视频轨道"
+
+#: modules/control/rc.c:827
+msgid "| vratio [X] . . . . . . . set/get video aspect ratio"
+msgstr "| vratio [X] . . . . . . . 设置/获取视频高宽比"
+
+#: modules/control/rc.c:828
+msgid "| vcrop [X] . . . . . . . . . . . set/get video crop"
+msgstr "| vcrop [X] . . . . . . . . . . . 设置/获取视频剪辑"
+
+#: modules/control/rc.c:829
+msgid "| vzoom [X] . . . . . . . . . . . set/get video zoom"
+msgstr "| vzoom [X] . . . . . . . . . . . 设置/获取视频缩放"
+
+#: modules/control/rc.c:830
+msgid "| snapshot . . . . . . . . . . . . take video snapshot"
+msgstr "| snapshot . . . . . . . . . . . . 获取视频截图"
+
+#: modules/control/rc.c:831
+msgid "| strack [X] . . . . . . . . . set/get subtitle track"
+msgstr "| strack [X] . . . . . . . . . 设置/获取字幕轨道"
+
+#: modules/control/rc.c:832
+msgid "| key [hotkey name] . . . . . . simulate hotkey press"
+msgstr "| key [热键名] . . . . . . 模拟按下热键"
+
+#: modules/control/rc.c:834
+msgid "| help . . . . . . . . . . . . . . . this help message"
+msgstr "| help . . . . . . . . . . . . . . . 此帮助信息"
+
+#: modules/control/rc.c:835
+msgid "| logout . . . . . . . exit (if in socket connection)"
+msgstr "| logout . . . . . . . 退出 (如果在端口连接)"
+
+#: modules/control/rc.c:836
+msgid "| quit . . . . . . . . . . . . . . . . . . . quit vlc"
+msgstr "| quit . . . . . . . . . . . . . . . . . . . 退出 vlc"
+
+#: modules/control/rc.c:838
+msgid "+----[ end of help ]"
+msgstr "+----[ 帮助结束 ]"
+
+#: modules/control/rc.c:965
+#, fuzzy
+msgid "Press pause to continue."
+msgstr "请按菜单选择或暂停继续。"
+
+#: modules/control/rc.c:1191 modules/control/rc.c:1446
+#: modules/control/rc.c:1490
+#, fuzzy
+msgid "Type 'pause' to continue."
+msgstr "输入 '菜单选择' 或 '暂停' 继续。"
+
+#: modules/control/rc.c:1283
+msgid "Error: `goto' needs an argument greater than zero."
+msgstr "错误: `goto' 需要一个变量大于零。"
+
+#: modules/control/rc.c:1294
+#, c-format
+msgid "Playlist has only %u element"
+msgid_plural "Playlist has only %u elements"
+msgstr[0] "播放列表仅有 %u 个元素"
+
+#: modules/control/rc.c:1746 modules/gui/ncurses.c:813
+msgid "+-[Incoming]"
+msgstr "+-[入站]"
+
+#: modules/control/rc.c:1747 modules/gui/ncurses.c:815
+#, c-format
+msgid "| input bytes read : %8.0f KiB"
+msgstr "| 读入字节数 : %8.0f KiB"
+
+#: modules/control/rc.c:1749 modules/gui/ncurses.c:817
+#, c-format
+msgid "| input bitrate : %6.0f kb/s"
+msgstr "| 输入位率 : %6.0f kb/s"
+
+#: modules/control/rc.c:1751 modules/gui/ncurses.c:819
+#, c-format
+msgid "| demux bytes read : %8.0f KiB"
+msgstr "| 去复用字节读取 : %8.0f KiB"
+
+#: modules/control/rc.c:1753 modules/gui/ncurses.c:821
+#, c-format
+msgid "| demux bitrate : %6.0f kb/s"
+msgstr "| 去复用位率 : %6.0f kb/s"
+
+#: modules/control/rc.c:1755
+#, c-format
+msgid "| demux corrupted : %5<PRIi64>"
+msgstr "| 去复用失败 : %5<PRIi64>"
+
+#: modules/control/rc.c:1757
+#, c-format
+msgid "| discontinuities : %5<PRIi64>"
+msgstr "| 间断 : %5<PRIi64>"
+
+#: modules/control/rc.c:1761 modules/gui/ncurses.c:827
+msgid "+-[Video Decoding]"
+msgstr "+-[视频解码]"
+
+#: modules/control/rc.c:1762 modules/gui/ncurses.c:829
+#, c-format
+msgid "| video decoded : %5<PRIi64>"
+msgstr "| 已解码视频 : %5<PRIi64>"
+
+#: modules/control/rc.c:1764 modules/gui/ncurses.c:831
+#, c-format
+msgid "| frames displayed : %5<PRIi64>"
+msgstr "| 已显示的帧 : %5<PRIi64>"
+
+#: modules/control/rc.c:1766 modules/gui/ncurses.c:833
+#, c-format
+msgid "| frames lost : %5<PRIi64>"
+msgstr "| 已丢失的帧 : %5<PRIi64>"
+
+#: modules/control/rc.c:1770 modules/gui/ncurses.c:839
+msgid "+-[Audio Decoding]"
+msgstr "+-[音频解码]"
+
+#: modules/control/rc.c:1771 modules/gui/ncurses.c:841
+#, c-format
+msgid "| audio decoded : %5<PRIi64>"
+msgstr "| 已解码音频 : %5<PRIi64>"
+
+#: modules/control/rc.c:1773 modules/gui/ncurses.c:843
+#, c-format
+msgid "| buffers played : %5<PRIi64>"
+msgstr "| 已播放缓存 : %5<PRIi64>"
+
+#: modules/control/rc.c:1775 modules/gui/ncurses.c:845
+#, c-format
+msgid "| buffers lost : %5<PRIi64>"
+msgstr "| 已丢失缓存 : %5<PRIi64>"
+
+#: modules/control/rc.c:1779 modules/gui/ncurses.c:850
+msgid "+-[Streaming]"
+msgstr "+-[串流]"
+
+#: modules/control/rc.c:1780 modules/gui/ncurses.c:852
+#, c-format
+msgid "| packets sent : %5<PRIi64>"
+msgstr "| 已发送数据包 : %5<PRIi64>"
+
+#: modules/control/rc.c:1782 modules/gui/ncurses.c:853
+#, c-format
+msgid "| bytes sent : %8.0f KiB"
+msgstr "| 发送字节数 : %8.0f KiB"
+
+#: modules/control/rc.c:1784 modules/gui/ncurses.c:855
+#, c-format
+msgid "| sending bitrate : %6.0f kb/s"
+msgstr "| 正在发送的位率 : %6.0f kb/s"
+
+#: modules/demux/aiff.c:49
+msgid "AIFF demuxer"
+msgstr "AIFF 去复用器"
+
+#: modules/demux/asf/asf.c:61
+msgid "ASF/WMV demuxer"
+msgstr "ASF/WMV 去复用器"
+
+#: modules/demux/asf/asf.c:215 modules/demux/asf/asf.c:1193
+msgid "Could not demux ASF stream"
+msgstr "无法去复用 ASF 流"
+
+#: modules/demux/asf/asf.c:216
+msgid "VLC failed to load the ASF header."
+msgstr "VLC 载入 ASF 头部失败。"
+
+#: modules/demux/asf/asf.c:1194
+msgid "DRM protected streams are not supported."
+msgstr ""
+
+#: modules/demux/au.c:50
+msgid "AU demuxer"
+msgstr "AV 去复用器"
+
+#: modules/demux/avformat/avformat.c:41
+msgid "Avformat demuxer"
+msgstr "Avformat 去复用器"
+
+#: modules/demux/avformat/avformat.c:42
+msgid "Avformat"
+msgstr "Avformat"
+
+#: modules/demux/avformat/avformat.c:45
+#, fuzzy
+msgid "Demuxer"
+msgstr "去复用器"
+
+#: modules/demux/avformat/avformat.c:56
+msgid "Avformat muxer"
+msgstr "Avformat 复用器"
+
+#: modules/demux/avformat/avformat.c:58 modules/stream_out/rtp.c:85
+msgid "Muxer"
+msgstr "复用器"
+
+#: modules/demux/avformat/avformat.h:35
+msgid "Avformat mux"
+msgstr "Avformat 复用"
+
+#: modules/demux/avformat/avformat.h:36
+msgid "Force use of a specific avformat muxer."
+msgstr "强制使用指定的 avformat 复用器。"
+
+#: modules/demux/avformat/avformat.h:37
+msgid "Format name"
+msgstr "格式名称"
+
+#: modules/demux/avformat/avformat.h:38
+msgid "Internal libavcodec format name"
+msgstr "libavcodec 内部格式名称"
+
+#: modules/demux/avi/avi.c:53
+msgid "Force interleaved method"
+msgstr "强制交错模式"
+
+#: modules/demux/avi/avi.c:55
+msgid "Force index creation"
+msgstr "强制创建索引"
+
+#: modules/demux/avi/avi.c:57
+msgid ""
+"Recreate a index for the AVI file. Use this if your AVI file is damaged or "
+"incomplete (not seekable)."
+msgstr ""
+"为 AVI 文件创建一个索引。如果您的 AVI 文件已损坏或不完整 (无法搜索) 请使用此"
+"功能。"
+
+#: modules/demux/avi/avi.c:68
+msgid "Ask for action"
+msgstr "询问操作"
+
+#: modules/demux/avi/avi.c:69
+msgid "Always fix"
+msgstr "总是修复"
+
+#: modules/demux/avi/avi.c:70
+msgid "Never fix"
+msgstr "不修复"
+
+#: modules/demux/avi/avi.c:71
+msgid "Fix when necessary"
+msgstr "需要时修复"
+
+#: modules/demux/avi/avi.c:75
+msgid "AVI demuxer"
+msgstr "AVI 去复用器"
+
+#: modules/demux/avi/avi.c:721
+msgid "Broken or missing AVI Index"
+msgstr "AVI 索引损坏或丢失"
+
+#: modules/demux/avi/avi.c:722
+msgid ""
+"Because this AVI file index is broken or missing, seeking will not work "
+"correctly.\n"
+"VLC won't repair your file but can temporary fix this problem by building an "
+"index in memory.\n"
+"This step might take a long time on a large file.\n"
+"What do you want to do?"
+msgstr ""
+"由于此 AVI 文件索引损坏或丢失，定位将无法正常进行。\n"
+"VLC 不会去修复文件，但可以通过在内存中建立索引临时修复此问题。\n"
+"这一步对于大文件可能要耗费较长时间。\n"
+"您打算如何操作?"
+
+#: modules/demux/avi/avi.c:728
+msgid "Build index then play"
+msgstr "建立索引再播放"
+
+#: modules/demux/avi/avi.c:728
+msgid "Play as is"
+msgstr "原样播放"
+
+#: modules/demux/avi/avi.c:728
+msgid "Do not play"
+msgstr "不要播放"
+
+#: modules/demux/avi/avi.c:2555
+msgid "Fixing AVI Index..."
+msgstr "正在修复 AVI 索引..."
+
+#: modules/demux/caf.c:53
+#, fuzzy
+msgid "CAF demuxer"
+msgstr "AIFF 去复用器"
+
+#: modules/demux/cdg.c:43
+msgid "CDG demuxer"
+msgstr "CDG 去复用器"
+
+#: modules/demux/demuxdump.c:32
+msgid "Dump module"
+msgstr "转储模块"
+
+#: modules/demux/demuxdump.c:33
+msgid "Dump filename"
+msgstr "转储文件名"
+
+#: modules/demux/demuxdump.c:35
+msgid "Name of the file to which the raw stream will be dumped."
+msgstr "raw 流将被转储的文件名。"
+
+#: modules/demux/demuxdump.c:36
+msgid "Append to existing file"
+msgstr "附加到已存在的文件"
+
+#: modules/demux/demuxdump.c:38
+msgid "If the file already exists, it will not be overwritten."
+msgstr "如果文件已经存在，它将不会被覆盖。"
+
+#: modules/demux/demuxdump.c:47
+msgid "File dumper"
+msgstr "文件转储器"
+
+#: modules/demux/dirac.c:41
+msgid "Value to adjust dts by"
+msgstr "dts 数值调整量"
+
+#: modules/demux/dirac.c:54
+msgid "Dirac video demuxer"
+msgstr "Dirac 视频去复用器"
+
+#: modules/demux/flac.c:50
+msgid "FLAC demuxer"
+msgstr "FLAC 去复用器"
+
+#: modules/demux/image.c:44
+msgid "ES ID"
+msgstr "ES ID"
+
+#: modules/demux/image.c:52
+msgid "Decode"
+msgstr "解码"
+
+#: modules/demux/image.c:54
+msgid "Decode at the demuxer stage"
+msgstr "在去复用器级别解码"
+
+#: modules/demux/image.c:56
+msgid "Forced chroma"
+msgstr "强制色度"
+
+#: modules/demux/image.c:58
+msgid ""
+"If non empty and image-decode is true, the image will be converted to the "
+"specified chroma."
+msgstr "如果非空，且图像解码为真，图像将被转换至指定色度。"
+
+#: modules/demux/image.c:61
+msgid "Duration in seconds"
+msgstr "以秒为单位的持续时间"
+
+#: modules/demux/image.c:63
+msgid ""
+"Duration in seconds before simulating an end of file. A negative value means "
+"an unlimited play time."
+msgstr "模拟文件结尾之前持续的时长（以秒为单位）。负数值代表无限的播放时间。"
+
+#: modules/demux/image.c:68
+msgid "Frame rate of the elementary stream produced."
+msgstr "生成通量流的帧率。"
+
+#: modules/demux/image.c:70
+msgid "Real-time"
+msgstr "实时"
+
+#: modules/demux/image.c:72
+msgid ""
+"Use real-time mode suitable for being used as a master input and real-time "
+"input slaves."
+msgstr "使用适用作主输入与实时输入从属的实时模式。"
+
+#: modules/demux/image.c:76
+msgid "Image demuxer"
+msgstr "图像去复用器"
+
+#: modules/demux/image.c:77
+msgid "Image"
+msgstr "图像"
+
+#: modules/demux/mjpeg.c:46 modules/demux/mpeg/es.c:50
+#: modules/demux/mpeg/h264.c:43 modules/demux/mpeg/hevc.c:46
+#: modules/demux/rawvid.c:44 modules/demux/subtitle.c:75
+#: modules/demux/vc1.c:43 modules/gui/macosx/open.m:203
+msgid "Frames per Second"
+msgstr "每秒帧数"
+
+#: modules/demux/mjpeg.c:47
+msgid ""
+"This is the desired frame rate when playing MJPEG from a file. Use 0 (this "
+"is the default value) for a live stream (from a camera)."
+msgstr ""
+"这是一个在从一个文件播放 MJPEG 时的帧率。为一个实时流 (来自摄像机) 使用 0 (这"
+"是默认值)。"
+
+#: modules/demux/mjpeg.c:53
+msgid "M-JPEG camera demuxer"
+msgstr "M-JPEG 摄像机去复用器"
+
+#: modules/demux/mkv/chapter_command.cpp:143
+msgid "--- DVD Menu"
+msgstr "--- DVD 菜单"
+
+#: modules/demux/mkv/chapter_command.cpp:149
+msgid "First Played"
+msgstr "首先播放"
+
+#: modules/demux/mkv/chapter_command.cpp:151
+msgid "Video Manager"
+msgstr "视频管理器"
+
+#: modules/demux/mkv/chapter_command.cpp:157
+msgid "----- Title"
+msgstr "----- 标题"
+
+#: modules/demux/mkv/mkv.cpp:47
+msgid "Matroska stream demuxer"
+msgstr "Matroska 流去复用器"
+
+#: modules/demux/mkv/mkv.cpp:54
+msgid "Respect ordered chapters"
+msgstr "尊重已排序章节"
+
+#: modules/demux/mkv/mkv.cpp:55
+msgid "Play chapters in the order specified in the segment."
+msgstr "按照剪辑中指定的顺序播放章节。"
+
+#: modules/demux/mkv/mkv.cpp:58
+msgid "Chapter codecs"
+msgstr "章节编解码"
+
+#: modules/demux/mkv/mkv.cpp:59
+msgid "Use chapter codecs found in the segment."
+msgstr "使用剪辑中找到的章节编解码。"
+
+#: modules/demux/mkv/mkv.cpp:62 modules/gui/macosx/simple_prefs.m:345
+#: modules/gui/qt4/ui/sprefs_input.h:359
+msgid "Preload MKV files in the same directory"
+msgstr "预加载同目录中的 MKV 文件"
+
+#: modules/demux/mkv/mkv.cpp:63
+msgid ""
+"Preload matroska files in the same directory to find linked segments (not "
+"good for broken files)."
+msgstr "从同一目录中预载 matroska 文件以寻找关联剪辑 (对损坏文件不合适)。"
+
+#: modules/demux/mkv/mkv.cpp:66 modules/demux/ts.c:128
+msgid "Seek based on percent not time"
+msgstr "基于百分比非时间的搜索"
+
+#: modules/demux/mkv/mkv.cpp:67
+msgid "Seek based on percent not time."
+msgstr "基于百分比非时间的搜索。"
+
+#: modules/demux/mkv/mkv.cpp:70
+msgid "Dummy Elements"
+msgstr "空元素"
+
+#: modules/demux/mkv/mkv.cpp:71
+msgid "Read and discard unknown EBML elements (not good for broken files)."
+msgstr "读取并放弃未知的 EBML 元素 (对损坏的文件支持差)。"
+
+#: modules/demux/mod.c:55
+msgid "Enable noise reduction algorithm."
+msgstr "开启噪点消除算法。"
+
+#: modules/demux/mod.c:56
+msgid "Enable reverberation"
+msgstr "开启混响"
+
+#: modules/demux/mod.c:57
+msgid "Reverberation level (from 0 to 100, default value is 0)."
+msgstr "混响等级 (从 0 到 100, 默认值是 0)。"
+
+#: modules/demux/mod.c:59
+msgid "Reverberation delay, in ms. Usual values are from to 40 to 200ms."
+msgstr "以毫秒为单位的混响延迟。通常值是从 40 到 200 毫秒。"
+
+#: modules/demux/mod.c:61
+msgid "Enable megabass mode"
+msgstr "开启超重低音模式"
+
+#: modules/demux/mod.c:62
+msgid "Megabass mode level (from 0 to 100, default value is 0)."
+msgstr "超重低音模式等级 (从 0 到 100, 默认值是 0)。"
+
+#: modules/demux/mod.c:64
+msgid ""
+"Megabass mode cutoff frequency, in Hz. This is the maximum frequency for "
+"which the megabass effect applies. Valid values are from 10 to 100 Hz."
+msgstr ""
+"超重低音模式截至频率, 以 Hz 为单位。这是超重低音效果应用的最大频率。有效值从 "
+"10 到 100 Hz。"
+
+#: modules/demux/mod.c:67
+msgid "Surround effect level (from 0 to 100, default value is 0)."
+msgstr "环绕效果等级 (从 0 到 100, 默认值是 0)。"
+
+#: modules/demux/mod.c:69
+msgid "Surround delay, in ms. Usual values are from 5 to 40 ms."
+msgstr "环绕声延迟，以毫秒为单位。通常的值是从 5 到 40 毫秒。"
+
+#: modules/demux/mod.c:74
+msgid "MOD demuxer (libmodplug)"
+msgstr "MOD 去复用器 (libmodplug)"
+
+#: modules/demux/mod.c:85
+msgid "Reverberation level"
+msgstr "混响等级"
+
+#: modules/demux/mod.c:87
+msgid "Reverberation delay"
+msgstr "混响延迟"
+
+#: modules/demux/mod.c:89
+msgid "Mega bass"
+msgstr "超重低音"
+
+#: modules/demux/mod.c:92
+msgid "Mega bass level"
+msgstr "超重低音等级"
+
+#: modules/demux/mod.c:94
+msgid "Mega bass cutoff"
+msgstr "超重低音截至频率"
+
+#: modules/demux/mod.c:96
+msgid "Surround"
+msgstr "环绕声"
+
+#: modules/demux/mod.c:99
+msgid "Surround level"
+msgstr "环绕声等级"
+
+#: modules/demux/mod.c:101
+msgid "Surround delay (ms)"
+msgstr "环绕声延迟 (毫秒)"
+
+#: modules/demux/mp4/id3genres.h:32
+msgid "Blues"
+msgstr "蓝调"
+
+#: modules/demux/mp4/id3genres.h:33
+msgid "Classic Rock"
+msgstr "经典摇滚"
+
+#: modules/demux/mp4/id3genres.h:34
+msgid "Country"
+msgstr "国家"
+
+#: modules/demux/mp4/id3genres.h:36
+msgid "Disco"
+msgstr "迪斯科"
+
+#: modules/demux/mp4/id3genres.h:37
+msgid "Funk"
+msgstr "疯克"
+
+#: modules/demux/mp4/id3genres.h:38
+msgid "Grunge"
+msgstr "格郎基"
+
+#: modules/demux/mp4/id3genres.h:39
+msgid "Hip-Hop"
+msgstr "街舞"
+
+#: modules/demux/mp4/id3genres.h:40
+msgid "Jazz"
+msgstr "爵士"
+
+#: modules/demux/mp4/id3genres.h:41
+msgid "Metal"
+msgstr "金属"
+
+#: modules/demux/mp4/id3genres.h:42
+msgid "New Age"
+msgstr "新世纪"
+
+#: modules/demux/mp4/id3genres.h:43
+msgid "Oldies"
+msgstr "老歌"
+
+#: modules/demux/mp4/id3genres.h:44
+msgid "Other"
+msgstr "其它"
+
+#: modules/demux/mp4/id3genres.h:46
+msgid "R&B"
+msgstr "节奏蓝调"
+
+#: modules/demux/mp4/id3genres.h:47
+msgid "Rap"
+msgstr "说唱"
+
+#: modules/demux/mp4/id3genres.h:51
+msgid "Industrial"
+msgstr "工业摇滚"
+
+#: modules/demux/mp4/id3genres.h:52
+msgid "Alternative"
+msgstr "非主流 "
+
+#: modules/demux/mp4/id3genres.h:54
+msgid "Death Metal"
+msgstr "死亡金属"
+
+#: modules/demux/mp4/id3genres.h:55
+msgid "Pranks"
+msgstr "恶作剧"
+
+#: modules/demux/mp4/id3genres.h:56
+msgid "Soundtrack"
+msgstr "音轨"
+
+#: modules/demux/mp4/id3genres.h:57
+msgid "Euro-Techno"
+msgstr "欧陆风格"
+
+#: modules/demux/mp4/id3genres.h:58
+msgid "Ambient"
+msgstr "背景音乐"
+
+#: modules/demux/mp4/id3genres.h:59
+msgid "Trip-Hop"
+msgstr "神游舞曲"
+
+#: modules/demux/mp4/id3genres.h:60
+msgid "Vocal"
+msgstr "语音"
+
+#: modules/demux/mp4/id3genres.h:61
+msgid "Jazz+Funk"
+msgstr "爵士+疯克"
+
+#: modules/demux/mp4/id3genres.h:62
+msgid "Fusion"
+msgstr "流行"
+
+#: modules/demux/mp4/id3genres.h:63
+msgid "Trance"
+msgstr "催眠曲"
+
+#: modules/demux/mp4/id3genres.h:65
+msgid "Instrumental"
+msgstr "乐器"
+
+#: modules/demux/mp4/id3genres.h:66
+msgid "Acid"
+msgstr "酸味"
+
+#: modules/demux/mp4/id3genres.h:67
+msgid "House"
+msgstr "家庭"
+
+#: modules/demux/mp4/id3genres.h:68
+msgid "Game"
+msgstr "游戏"
+
+#: modules/demux/mp4/id3genres.h:69
+msgid "Sound Clip"
+msgstr "声音剪辑"
+
+#: modules/demux/mp4/id3genres.h:70
+msgid "Gospel"
+msgstr "圣经"
+
+#: modules/demux/mp4/id3genres.h:71 modules/gui/macosx/VideoEffects.m:138
+msgid "Noise"
+msgstr "噪点"
+
+#: modules/demux/mp4/id3genres.h:72
+msgid "Alternative Rock"
+msgstr "另类摇滚"
+
+#: modules/demux/mp4/id3genres.h:73
+msgid "Bass"
+msgstr "低音"
+
+#: modules/demux/mp4/id3genres.h:74
+msgid "Soul"
+msgstr "灵歌"
+
+#: modules/demux/mp4/id3genres.h:75
+msgid "Punk"
+msgstr "朋克"
+
+#: modules/demux/mp4/id3genres.h:77
+msgid "Meditative"
+msgstr "冥想"
+
+#: modules/demux/mp4/id3genres.h:78
+msgid "Instrumental Pop"
+msgstr "流行演奏"
+
+#: modules/demux/mp4/id3genres.h:79
+msgid "Instrumental Rock"
+msgstr "流行摇滚"
+
+#: modules/demux/mp4/id3genres.h:80
+msgid "Ethnic"
+msgstr "种族"
+
+#: modules/demux/mp4/id3genres.h:81
+msgid "Gothic"
+msgstr "哥特"
+
+#: modules/demux/mp4/id3genres.h:82
+msgid "Darkwave"
+msgstr "黑潮"
+
+#: modules/demux/mp4/id3genres.h:83
+msgid "Techno-Industrial"
+msgstr "数位工业"
+
+#: modules/demux/mp4/id3genres.h:84
+msgid "Electronic"
+msgstr "电子乐"
+
+#: modules/demux/mp4/id3genres.h:85
+msgid "Pop-Folk"
+msgstr "流行民谣"
+
+#: modules/demux/mp4/id3genres.h:86
+msgid "Eurodance"
+msgstr "欧洲舞曲"
+
+#: modules/demux/mp4/id3genres.h:87
+msgid "Dream"
+msgstr "梦幻"
+
+#: modules/demux/mp4/id3genres.h:88
+msgid "Southern Rock"
+msgstr "南方摇滚"
+
+#: modules/demux/mp4/id3genres.h:89
+msgid "Comedy"
+msgstr "脱口秀"
+
+#: modules/demux/mp4/id3genres.h:90
+msgid "Cult"
+msgstr "邪典"
+
+#: modules/demux/mp4/id3genres.h:91
+msgid "Gangsta"
+msgstr "暴力"
+
+#: modules/demux/mp4/id3genres.h:92
+msgid "Top 40"
+msgstr "Top 40"
+
+#: modules/demux/mp4/id3genres.h:93
+msgid "Christian Rap"
+msgstr "基督教说唱"
+
+#: modules/demux/mp4/id3genres.h:94
+msgid "Pop/Funk"
+msgstr "摇滚/疯克"
+
+#: modules/demux/mp4/id3genres.h:95
+msgid "Jungle"
+msgstr "丛林"
+
+#: modules/demux/mp4/id3genres.h:96
+msgid "Native American"
+msgstr "美国原生音乐"
+
+#: modules/demux/mp4/id3genres.h:97
+msgid "Cabaret"
+msgstr "卡巴莱"
+
+#: modules/demux/mp4/id3genres.h:98
+msgid "New Wave"
+msgstr "新潮"
+
+#: modules/demux/mp4/id3genres.h:99 modules/gui/macosx/VideoEffects.m:160
+#: modules/video_filter/psychedelic.c:55
+#: modules/gui/qt4/ui/video_effects.h:1479
+msgid "Psychedelic"
+msgstr "幻觉"
+
+#: modules/demux/mp4/id3genres.h:100
+msgid "Rave"
+msgstr "锐舞"
+
+#: modules/demux/mp4/id3genres.h:101
+msgid "Showtunes"
+msgstr "歌舞剧音乐"
+
+#: modules/demux/mp4/id3genres.h:102
+msgid "Trailer"
+msgstr "片尾"
+
+#: modules/demux/mp4/id3genres.h:103
+msgid "Lo-Fi"
+msgstr "低保真乐"
+
+#: modules/demux/mp4/id3genres.h:104
+msgid "Tribal"
+msgstr "部落音乐 "
+
+#: modules/demux/mp4/id3genres.h:105
+msgid "Acid Punk"
+msgstr "酸性朋克"
+
+#: modules/demux/mp4/id3genres.h:106
+msgid "Acid Jazz"
+msgstr "酸性爵士"
+
+#: modules/demux/mp4/id3genres.h:107
+msgid "Polka"
+msgstr "波尔卡"
+
+#: modules/demux/mp4/id3genres.h:108
+msgid "Retro"
+msgstr "怀旧 "
+
+#: modules/demux/mp4/id3genres.h:109
+msgid "Musical"
+msgstr "音乐片"
+
+#: modules/demux/mp4/id3genres.h:110
+msgid "Rock & Roll"
+msgstr "摇滚"
+
+#: modules/demux/mp4/id3genres.h:111
+msgid "Hard Rock"
+msgstr "硬摇滚"
+
+#: modules/demux/mp4/id3genres.h:112
+msgid "Folk"
+msgstr "民谣"
+
+#: modules/demux/mp4/id3genres.h:113
+msgid "Folk-Rock"
+msgstr "民谣摇滚"
+
+#: modules/demux/mp4/id3genres.h:114
+msgid "National Folk"
+msgstr "国家民谣"
+
+#: modules/demux/mp4/id3genres.h:115
+msgid "Swing"
+msgstr "节奏"
+
+#: modules/demux/mp4/id3genres.h:116
+msgid "Fast Fusion"
+msgstr "快速融合"
+
+#: modules/demux/mp4/id3genres.h:117
+msgid "Bebob"
+msgstr "比博普爵士乐"
+
+#: modules/demux/mp4/id3genres.h:119
+msgid "Revival"
+msgstr "复兴"
+
+#: modules/demux/mp4/id3genres.h:120
+msgid "Celtic"
+msgstr "塞尔特"
+
+#: modules/demux/mp4/id3genres.h:121
+msgid "Bluegrass"
+msgstr "蓝草"
+
+#: modules/demux/mp4/id3genres.h:122
+msgid "Avantgarde"
+msgstr "前卫"
+
+#: modules/demux/mp4/id3genres.h:123
+msgid "Gothic Rock"
+msgstr "哥特摇滚"
+
+#: modules/demux/mp4/id3genres.h:124
+msgid "Progressive Rock"
+msgstr "前卫摇滚"
+
+#: modules/demux/mp4/id3genres.h:125
+msgid "Psychedelic Rock"
+msgstr "迷幻摇滚"
+
+#: modules/demux/mp4/id3genres.h:126
+msgid "Symphonic Rock"
+msgstr "交响摇滚"
+
+#: modules/demux/mp4/id3genres.h:127
+msgid "Slow Rock"
+msgstr "慢摇滚"
+
+#: modules/demux/mp4/id3genres.h:128
+msgid "Big Band"
+msgstr "大乐团"
+
+#: modules/demux/mp4/id3genres.h:130
+msgid "Easy Listening"
+msgstr "轻音乐"
+
+#: modules/demux/mp4/id3genres.h:131
+msgid "Acoustic"
+msgstr "原音乐"
+
+#: modules/demux/mp4/id3genres.h:132
+msgid "Humour"
+msgstr "幽默"
+
+#: modules/demux/mp4/id3genres.h:133
+msgid "Speech"
+msgstr "语音"
+
+#: modules/demux/mp4/id3genres.h:134
+msgid "Chanson"
+msgstr "小调"
+
+#: modules/demux/mp4/id3genres.h:135
+msgid "Opera"
+msgstr "歌剧"
+
+#: modules/demux/mp4/id3genres.h:136
+msgid "Chamber Music"
+msgstr "室内乐"
+
+#: modules/demux/mp4/id3genres.h:137
+msgid "Sonata"
+msgstr "奏鸣曲"
+
+#: modules/demux/mp4/id3genres.h:138
+msgid "Symphony"
+msgstr "交响乐"
+
+#: modules/demux/mp4/id3genres.h:139
+msgid "Booty Bass"
+msgstr "Booty Bass"
+
+#: modules/demux/mp4/id3genres.h:140
+msgid "Primus"
+msgstr "Primus"
+
+#: modules/demux/mp4/id3genres.h:141
+msgid "Porn Groove"
+msgstr "Porn Groove"
+
+#: modules/demux/mp4/id3genres.h:142
+msgid "Satire"
+msgstr "讽刺"
+
+#: modules/demux/mp4/id3genres.h:143
+msgid "Slow Jam"
+msgstr "Slow Jam"
+
+#: modules/demux/mp4/id3genres.h:145
+msgid "Tango"
+msgstr "探戈"
+
+#: modules/demux/mp4/id3genres.h:146
+msgid "Samba"
+msgstr "桑巴"
+
+#: modules/demux/mp4/id3genres.h:147
+msgid "Folklore"
+msgstr "民俗"
+
+#: modules/demux/mp4/id3genres.h:148
+msgid "Ballad"
+msgstr "民谣"
+
+#: modules/demux/mp4/id3genres.h:149
+msgid "Power Ballad"
+msgstr "Power Ballad"
+
+#: modules/demux/mp4/id3genres.h:150
+msgid "Rhythmic Soul"
+msgstr "韵律灵魂"
+
+#: modules/demux/mp4/id3genres.h:151
+msgid "Freestyle"
+msgstr "自由"
+
+#: modules/demux/mp4/id3genres.h:152
+msgid "Duet"
+msgstr "二重奏"
+
+#: modules/demux/mp4/id3genres.h:153
+msgid "Punk Rock"
+msgstr "朋克摇滚"
+
+#: modules/demux/mp4/id3genres.h:154
+msgid "Drum Solo"
+msgstr "鼓独奏"
+
+#: modules/demux/mp4/id3genres.h:155
+msgid "Acapella"
+msgstr "阿卡贝拉"
+
+#: modules/demux/mp4/id3genres.h:156
+msgid "Euro-House"
+msgstr "Euro-House"
+
+#: modules/demux/mp4/id3genres.h:157
+msgid "Dance Hall"
+msgstr "舞厅"
+
+#: modules/demux/mp4/id3genres.h:158
+msgid "Goa"
+msgstr "Goa"
+
+#: modules/demux/mp4/id3genres.h:159
+msgid "Drum & Bass"
+msgstr "鼓与贝司"
+
+#: modules/demux/mp4/id3genres.h:160
+msgid "Club - House"
+msgstr "俱乐部 - 房屋"
+
+#: modules/demux/mp4/id3genres.h:161
+msgid "Hardcore"
+msgstr "骨灰级"
+
+#: modules/demux/mp4/id3genres.h:162
+msgid "Terror"
+msgstr "恐怖"
+
+#: modules/demux/mp4/id3genres.h:163
+msgid "Indie"
+msgstr "独立"
+
+#: modules/demux/mp4/id3genres.h:164
+msgid "BritPop"
+msgstr "英伦"
+
+#: modules/demux/mp4/id3genres.h:165
+msgid "Negerpunk"
+msgstr "黑人朋克"
+
+#: modules/demux/mp4/id3genres.h:166
+msgid "Polsk Punk"
+msgstr "波兰朋克"
+
+#: modules/demux/mp4/id3genres.h:167
+msgid "Beat"
+msgstr "节拍"
+
+#: modules/demux/mp4/id3genres.h:168
+msgid "Christian Gangsta Rap"
+msgstr "基督教黑帮说唱"
+
+#: modules/demux/mp4/id3genres.h:169
+msgid "Heavy Metal"
+msgstr "重金属"
+
+#: modules/demux/mp4/id3genres.h:170
+msgid "Black Metal"
+msgstr "黑色金属"
+
+#: modules/demux/mp4/id3genres.h:171
+msgid "Crossover"
+msgstr "混合"
+
+#: modules/demux/mp4/id3genres.h:172
+msgid "Contemporary Christian"
+msgstr "当代基督教"
+
+#: modules/demux/mp4/id3genres.h:173
+msgid "Christian Rock"
+msgstr "基督教摇滚"
+
+#: modules/demux/mp4/id3genres.h:174
+msgid "Merengue"
+msgstr "梅伦格"
+
+#: modules/demux/mp4/id3genres.h:175
+msgid "Salsa"
+msgstr "莎莎"
+
+#: modules/demux/mp4/id3genres.h:176
+msgid "Thrash Metal"
+msgstr "鞭挞金属"
+
+#: modules/demux/mp4/id3genres.h:177
+msgid "Anime"
+msgstr "日漫"
+
+#: modules/demux/mp4/id3genres.h:178
+msgid "JPop"
+msgstr "日本流行"
+
+#: modules/demux/mp4/id3genres.h:179
+msgid "Synthpop"
+msgstr "合成器流行乐"
+
+#: modules/demux/mp4/mp4.c:52
+msgid "MP4 stream demuxer"
+msgstr "MP4 流去复用器"
+
+#: modules/demux/mp4/mp4.c:53
+msgid "MP4"
+msgstr "MP4"
+
+#: modules/demux/mp4/mp4.c:1408
+msgid "Writer"
+msgstr "作词"
+
+#: modules/demux/mp4/mp4.c:1409
+msgid "Composer"
+msgstr "作曲"
+
+#: modules/demux/mp4/mp4.c:1410
+msgid "Producer"
+msgstr "监制"
+
+#: modules/demux/mp4/mp4.c:1411 modules/gui/macosx/playlistinfo.m:385
+#: modules/gui/qt4/components/controller.hpp:120
+#: modules/gui/qt4/components/controller.hpp:132
+msgid "Information"
+msgstr "信息"
+
+#: modules/demux/mp4/mp4.c:1412
+msgid "Disclaimer"
+msgstr "免责声明"
+
+#: modules/demux/mp4/mp4.c:1413
+msgid "Requirements"
+msgstr "要求"
+
+#: modules/demux/mp4/mp4.c:1414
+msgid "Original Format"
+msgstr "原始格式"
+
+#: modules/demux/mp4/mp4.c:1415
+msgid "Display Source As"
+msgstr "显示源为"
+
+#: modules/demux/mp4/mp4.c:1416
+msgid "Host Computer"
+msgstr "主机"
+
+#: modules/demux/mp4/mp4.c:1417
+msgid "Performers"
+msgstr "演出者"
+
+#: modules/demux/mp4/mp4.c:1418
+msgid "Original Performer"
+msgstr "原始演出者"
+
+#: modules/demux/mp4/mp4.c:1419
+msgid "Providers Source Content"
+msgstr "提供商源内容"
+
+#: modules/demux/mp4/mp4.c:1420
+msgid "Warning"
+msgstr "警告"
+
+#: modules/demux/mp4/mp4.c:1421
+msgid "Software"
+msgstr "软件"
+
+#: modules/demux/mp4/mp4.c:1422 modules/demux/xiph_metadata.h:57
+#: modules/demux/xiph_metadata.h:64
+msgid "Lyrics"
+msgstr "歌词"
+
+#: modules/demux/mp4/mp4.c:1423
+msgid "Record Company"
+msgstr "唱片公司"
+
+#: modules/demux/mp4/mp4.c:1424
+msgid "Model"
+msgstr "型号"
+
+#: modules/demux/mp4/mp4.c:1425
+msgid "Product"
+msgstr "产品"
+
+#: modules/demux/mp4/mp4.c:1426
+msgid "Grouping"
+msgstr "分组"
+
+#: modules/demux/mp4/mp4.c:1428
+msgid "Sub-Title"
+msgstr "副标题"
+
+#: modules/demux/mp4/mp4.c:1429
+msgid "Arranger"
+msgstr "编曲"
+
+#: modules/demux/mp4/mp4.c:1430
+msgid "Art Director"
+msgstr "艺术总监"
+
+#: modules/demux/mp4/mp4.c:1431
+msgid "Copyright Acknowledgement"
+msgstr "版权致谢"
+
+#: modules/demux/mp4/mp4.c:1432
+msgid "Conductor"
+msgstr "指挥"
+
+#: modules/demux/mp4/mp4.c:1433
+msgid "Song Description"
+msgstr "曲目描述"
+
+#: modules/demux/mp4/mp4.c:1434
+msgid "Liner Notes"
+msgstr "内嵌注释"
+
+#: modules/demux/mp4/mp4.c:1435
+msgid "Phonogram Rights"
+msgstr "录音制品权利"
+
+#: modules/demux/mp4/mp4.c:1437
+msgid "Sound Engineer"
+msgstr "音响工程师"
+
+#: modules/demux/mp4/mp4.c:1438
+msgid "Soloist"
+msgstr "独奏"
+
+#: modules/demux/mp4/mp4.c:1439
+msgid "Thanks"
+msgstr "感谢"
+
+#: modules/demux/mp4/mp4.c:1440
+msgid "Executive Producer"
+msgstr "执行监制"
+
+#: modules/demux/mpc.c:62
+msgid "MusePack demuxer"
+msgstr "MusePack 去复用器"
+
+#: modules/demux/mpeg/es.c:51
+msgid ""
+"This is the frame rate used as a fallback when playing MPEG video elementary "
+"streams."
+msgstr "这是在播放 MPEG 视频通量流时的备选帧率。"
+
+#: modules/demux/mpeg/es.c:57
+msgid "MPEG-I/II/4 / A52 / DTS / MLP audio"
+msgstr "MPEG-I/II/4 / A52 / DTS / MLP 音频"
+
+#: modules/demux/mpeg/es.c:58
+msgid "Audio ES"
+msgstr "音频 ES"
+
+#: modules/demux/mpeg/es.c:70
+msgid "MPEG-4 video"
+msgstr "MPEG-4 视频"
+
+#: modules/demux/mpeg/h264.c:44
+msgid "Desired frame rate for the H264 stream."
+msgstr "H264 流的期望帧率。"
+
+#: modules/demux/mpeg/h264.c:51
+msgid "H264 video demuxer"
+msgstr "H264 视频去复用器"
+
+#: modules/demux/mpeg/hevc.c:47
+#, fuzzy
+msgid "Desired frame rate for the stream."
+msgstr "H264 流的期望帧率。"
+
+#: modules/demux/mpeg/hevc.c:54
+#, fuzzy
+msgid "HEVC/H.265 video demuxer"
+msgstr "H264 视频去复用器"
+
+#: modules/demux/mpeg/mpgv.c:46
+msgid "MPEG-I/II video demuxer"
+msgstr "MPEG-I/II 视频去复用器"
+
+#: modules/demux/nsc.c:47
+msgid "Windows Media NSC metademux"
+msgstr "Windows Media NSC 元去复用器"
+
+#: modules/demux/nsv.c:49
+msgid "NullSoft demuxer"
+msgstr "NullSoft 去复用器"
+
+#: modules/demux/nuv.c:49
+msgid "Nuv demuxer"
+msgstr "Nuv 去复用器"
+
+#: modules/demux/ogg.c:56
+msgid "OGG demuxer"
+msgstr "OGG 去复用器"
+
+#: modules/demux/playlist/gvp.c:208
+msgid "Google Video"
+msgstr "Google 视频"
+
+#: modules/demux/playlist/playlist.c:46
+msgid "Show shoutcast adult content"
+msgstr "显示 shoutcast 成人内容"
+
+#: modules/demux/playlist/playlist.c:47
+msgid "Show NC17 rated video streams when using shoutcast video playlists."
+msgstr "在使用视频播放列表时显示 NC17 分级的视频流。"
+
+#: modules/demux/playlist/playlist.c:50
+msgid "Skip ads"
+msgstr "跳过广告"
+
+#: modules/demux/playlist/playlist.c:51
+msgid ""
+"Use playlist options usually used to prevent ads skipping to detect ads and "
+"prevent adding them to the playlist."
+msgstr ""
+"使用播放列表选项通常被用于防治广告被跳过检测并防止添加它们到播放列表中。"
+
+#: modules/demux/playlist/playlist.c:67
+msgid "M3U playlist import"
+msgstr "导入 M3U 播放列表"
+
+#: modules/demux/playlist/playlist.c:72
+msgid "RAM playlist import"
+msgstr "RAM 播放列表导入"
+
+#: modules/demux/playlist/playlist.c:77
+msgid "PLS playlist import"
+msgstr "导入 PLS 播放列表"
+
+#: modules/demux/playlist/playlist.c:82
+msgid "B4S playlist import"
+msgstr "导入 B4S 播放列表"
+
+#: modules/demux/playlist/playlist.c:87
+msgid "DVB playlist import"
+msgstr "导入 DVB 播放列表"
+
+#: modules/demux/playlist/playlist.c:92
+msgid "Podcast parser"
+msgstr "Podcast 解析器"
+
+#: modules/demux/playlist/playlist.c:97
+msgid "XSPF playlist import"
+msgstr "导入 XSPF 播放列表"
+
+#: modules/demux/playlist/playlist.c:102
+msgid "New winamp 5.2 shoutcast import"
+msgstr "新建 winamp 5.2 shoutcast 导入"
+
+#: modules/demux/playlist/playlist.c:109
+msgid "ASX playlist import"
+msgstr "导入 ASX 播放列表"
+
+#: modules/demux/playlist/playlist.c:114
+msgid "Kasenna MediaBase parser"
+msgstr "Kasenna 媒体库解析器"
+
+#: modules/demux/playlist/playlist.c:119
+msgid "QuickTime Media Link importer"
+msgstr "QuickTime 媒体链接导入器"
+
+#: modules/demux/playlist/playlist.c:124
+msgid "Google Video Playlist importer"
+msgstr "Google 视频播放列表导入器"
+
+#: modules/demux/playlist/playlist.c:129
+msgid "Dummy IFO demux"
+msgstr "空 ifo 去复用"
+
+#: modules/demux/playlist/playlist.c:134
+msgid "iTunes Music Library importer"
+msgstr "iTunes 音乐库导入器"
+
+#: modules/demux/playlist/playlist.c:139
+msgid "WPL playlist import"
+msgstr "导入 WPL 播放列表"
+
+#: modules/demux/playlist/playlist.c:144
+msgid "ZPL playlist import"
+msgstr "导入 ZPL 播放列表"
+
+#: modules/demux/playlist/podcast.c:195 modules/demux/playlist/podcast.c:207
+#: modules/demux/playlist/podcast.c:269 modules/demux/playlist/podcast.c:292
+msgid "Podcast Info"
+msgstr "Podcast 信息"
+
+#: modules/demux/playlist/podcast.c:197
+msgid "Podcast Link"
+msgstr "Podcast 链接"
+
+#: modules/demux/playlist/podcast.c:198
+msgid "Podcast Copyright"
+msgstr "Podcast 版权"
+
+#: modules/demux/playlist/podcast.c:199
+msgid "Podcast Category"
+msgstr "Podcast 分类"
+
+#: modules/demux/playlist/podcast.c:200 modules/demux/playlist/podcast.c:276
+msgid "Podcast Keywords"
+msgstr "Podcast 关键词"
+
+#: modules/demux/playlist/podcast.c:201 modules/demux/playlist/podcast.c:277
+msgid "Podcast Subtitle"
+msgstr "Podcast 字幕"
+
+#: modules/demux/playlist/podcast.c:207 modules/demux/playlist/podcast.c:278
+msgid "Podcast Summary"
+msgstr "Podcast 摘要"
+
+#: modules/demux/playlist/podcast.c:272
+msgid "Podcast Publication Date"
+msgstr "Podcast 发布日期"
+
+#: modules/demux/playlist/podcast.c:273
+msgid "Podcast Author"
+msgstr "Podcast 作者"
+
+#: modules/demux/playlist/podcast.c:274
+msgid "Podcast Subcategory"
+msgstr "Podcast 子分类"
+
+#: modules/demux/playlist/podcast.c:275
+msgid "Podcast Duration"
+msgstr "Podcast 时长"
+
+#: modules/demux/playlist/podcast.c:279
+msgid "Podcast Type"
+msgstr "Podcast 类型"
+
+#: modules/demux/playlist/podcast.c:293
+msgid "Podcast Size"
+msgstr "Podcast 大小"
+
+#: modules/demux/playlist/podcast.c:294
+#, c-format
+msgid "%s bytes"
+msgstr "%s 字节"
+
+#: modules/demux/playlist/shoutcast.c:325
+msgid "Shoutcast"
+msgstr "Shoutcast"
+
+#: modules/demux/playlist/shoutcast.c:329
+msgid "Listeners"
+msgstr "收听者"
+
+#: modules/demux/playlist/shoutcast.c:330
+msgid "Load"
+msgstr "加载"
+
+#: modules/demux/ps.c:43
+msgid "Trust MPEG timestamps"
+msgstr "受信任的 MPEG 时间戳"
+
+#: modules/demux/ps.c:44
+msgid ""
+"Normally we use the timestamps of the MPEG files to calculate position and "
+"duration. However sometimes this might not be usable. Disable this option to "
+"calculate from the bitrate instead."
+msgstr ""
+"通常我们使用 MPEG 文件的时间戳来计算位置和持续时间。但是在某些时候这可能没有"
+"用。关闭此选项使用位率计算代替。"
+
+#: modules/demux/ps.c:56 modules/demux/ps.c:69
+msgid "MPEG-PS demuxer"
+msgstr "MPEG-PS 去复用器"
+
+#: modules/demux/ps.c:57
+msgid "PS"
+msgstr "PS"
+
+#: modules/demux/pva.c:43
+msgid "PVA demuxer"
+msgstr "PVA 去复用器"
+
+#: modules/demux/rawaud.c:44
+msgid "Audio sample rate in Hertz. Default is 48000 Hz."
+msgstr "音频采样率，单位为赫兹。默认为 48000 Hz。"
+
+#: modules/demux/rawaud.c:46 modules/stream_out/transcode/transcode.c:100
+#: share/lua/http/dialogs/create_stream.html:316
+msgid "Audio channels"
+msgstr "声道"
+
+#: modules/demux/rawaud.c:47
+msgid "Audio channels in input stream. Numeric value >0. Default is 2."
+msgstr "输入流的音频声道数。数值 >0。默认为 2。"
+
+#: modules/demux/rawaud.c:49
+msgid "FOURCC code of raw input format"
+msgstr "原始输入格式的 FOURCC 码"
+
+#: modules/demux/rawaud.c:51
+msgid "FOURCC code of the raw input format. This is a four character string."
+msgstr "raw 输入格式的 FOURCC 代码。这是个四位的字符串。"
+
+#: modules/demux/rawaud.c:53
+msgid "Forces the audio language"
+msgstr "强制音频语言"
+
+#: modules/demux/rawaud.c:54
+msgid ""
+"Forces the audio language for the output mux. Three letter ISO639 code. "
+"Default is 'eng'. "
+msgstr "强制输出混流的音频语言。三个字母的 ISO639 码。默认为 'eng'。"
+
+#: modules/demux/rawaud.c:64
+msgid "Raw audio demuxer"
+msgstr "raw 音频去复用器"
+
+#: modules/demux/rawdv.c:43
+msgid ""
+"The demuxer will advance timestamps if the input can't keep up with the rate."
+msgstr "如果输入不能保持帧率，那么去复用器将增加时间戳。"
+
+#: modules/demux/rawdv.c:51
+msgid "DV (Digital Video) demuxer"
+msgstr "DV (数字视频) 去复用器"
+
+#: modules/demux/rawvid.c:45
+msgid ""
+"This is the desired frame rate when playing raw video streams. In the form "
+"30000/1001 or 29.97"
+msgstr "播放原始视频流时所需的帧率。格式为 30000/1001 或 29.97"
+
+#: modules/demux/rawvid.c:49
+msgid "This specifies the width in pixels of the raw video stream."
+msgstr "这是为 raw 视频流指定宽度，以像素为单位。"
+
+#: modules/demux/rawvid.c:53
+msgid "This specifies the height in pixels of the raw video stream."
+msgstr "这是为 raw 视频流指定高度，以像素为单位。"
+
+#: modules/demux/rawvid.c:56
+msgid "Force chroma (Use carefully)"
+msgstr "强制色度 (谨慎使用)"
+
+#: modules/demux/rawvid.c:57
+msgid "Force chroma. This is a four character string."
+msgstr "强制色度。这是一个四字节的字串。"
+
+#: modules/demux/rawvid.c:65
+msgid "Raw video demuxer"
+msgstr "Raw 去复用器"
+
+#: modules/demux/real.c:70
+msgid "Real demuxer"
+msgstr "Real 去复用器"
+
+#: modules/demux/sid.cpp:56
+msgid "C64 sid demuxer"
+msgstr "C64 sid 去复用器"
+
+#: modules/demux/smf.c:41
+msgid "SMF demuxer"
+msgstr "SMF 去复用器"
+
+#: modules/demux/stl.c:43
+msgid "EBU STL subtitles parser"
+msgstr "EBU STL 字幕解析器"
+
+#: modules/demux/subtitle.c:51
+msgid "Apply a delay to all subtitles (in 1/10s, eg 100 means 10s)."
+msgstr "为所有字幕应用一个延迟 (在 1/10 秒，例如 100 代表 10 秒)。"
+
+#: modules/demux/subtitle.c:53
+msgid ""
+"Override the normal frames per second settings. This will only work with "
+"MicroDVD and SubRIP (SRT) subtitles."
+msgstr "覆盖普通帧每秒设置。这仅工作于 MicroDVD 和 SubRTP (SRT) 字幕。"
+
+#: modules/demux/subtitle.c:56
+msgid ""
+"Force the subtiles format. Selecting \"auto\" means autodetection and should "
+"always work."
+msgstr "强制字幕轨道。选择“自动”可自动侦测，应总能正常选取。"
+
+#: modules/demux/subtitle.c:58
+msgid "Override the default track description."
+msgstr "覆盖默认轨道描述。"
+
+#: modules/demux/subtitle.c:70
+msgid "Text subtitle parser"
+msgstr "文本字幕解析器"
+
+#: modules/demux/subtitle.c:78 modules/video_filter/subsdelay.c:275
+msgid "Subtitle delay"
+msgstr "字幕延迟"
+
+#: modules/demux/subtitle.c:80
+msgid "Subtitle format"
+msgstr "字幕格式"
+
+#: modules/demux/subtitle.c:83
+msgid "Subtitle description"
+msgstr "字幕描述"
+
+#: modules/demux/ts.c:92
+msgid "Extra PMT"
+msgstr "扩展 PMT"
+
+#: modules/demux/ts.c:94
+msgid "Allows a user to specify an extra pmt (pmt_pid=pid:stream_type[,...])."
+msgstr "允许用户指定一个扩展 pmt (pmt_pid=pid:stream_type[,...])。"
+
+#: modules/demux/ts.c:96
+msgid "Set id of ES to PID"
+msgstr "设置 ES 的 id 为 PID"
+
+#: modules/demux/ts.c:97
+msgid ""
+"Set the internal ID of each elementary stream handled by VLC to the same "
+"value as the PID in the TS stream, instead of 1, 2, 3, etc. Useful to do "
+"'#duplicate{..., select=\"es=<pid>\"}'."
+msgstr ""
+"设置每个被 VLC 处理的通量流内部 ID 作为在 TS 流内部的 PID。代替 1, 2, 3, 等。"
+"用于执行 #duplicate{..., select=\"es=<pid>\"}'。"
+
+#: modules/demux/ts.c:102
+msgid "Fast udp streaming"
+msgstr "快速 udp 流"
+
+#: modules/demux/ts.c:104
+msgid "Sends TS to specific ip:port by udp (you must know what you are doing)."
+msgstr "通过 udp 发送 TS 到指定的 ip:端口 (您必须知道您在做什么)。"
+
+#: modules/demux/ts.c:106
+msgid "MTU for out mode"
+msgstr "用于输出模式的 MTU"
+
+#: modules/demux/ts.c:107
+msgid "MTU for out mode."
+msgstr "用于输出模式的 MTU。"
+
+#: modules/demux/ts.c:109 modules/mux/mpeg/ts.c:159
+msgid "CSA Key"
+msgstr "CSA 密匙"
+
+#: modules/demux/ts.c:110 modules/mux/mpeg/ts.c:160
+msgid ""
+"CSA encryption key. This must be a 16 char string (8 hexadecimal bytes)."
+msgstr ""
+"CSA 加密密匙。此选项必须是一个 16 字节长度的字串 (8 个以十六进制表示的字节)。"
+
+#: modules/demux/ts.c:113 modules/mux/mpeg/ts.c:163
+msgid "Second CSA Key"
+msgstr "第二 CSA 密匙"
+
+#: modules/demux/ts.c:114 modules/mux/mpeg/ts.c:164
+msgid ""
+"The even CSA encryption key. This must be a 16 char string (8 hexadecimal "
+"bytes)."
+msgstr "第二个 CSA 加密密匙。这必须是一个 16 字节的字串 (8 十六进制字节)。"
+
+#: modules/demux/ts.c:118
+msgid "Packet size in bytes to decrypt"
+msgstr "以字节为单位的要解密的数据包大小"
+
+#: modules/demux/ts.c:119
+msgid ""
+"Specify the size of the TS packet to decrypt. The decryption routines "
+"subtract the TS-header from the value before decrypting. "
+msgstr "指定要解密的 TS 数据包大小。解密通常要在之前从值中去掉 TS 头部。"
+
+#: modules/demux/ts.c:123
+msgid "Separate sub-streams"
+msgstr "分离子流"
+
+#: modules/demux/ts.c:125
+msgid ""
+"Separate teletex/dvbs pages into independent ES. It can be useful to turn "
+"off this option when using stream output."
+msgstr ""
+"将 teletex/dvbs 页面分为独立的基本流。当使用流输出时关闭此选项可能有用。"
+
+#: modules/demux/ts.c:130
+msgid ""
+"Seek and position based on a percent byte position, not a PCR generated time "
+"position. If seeking doesn't work property, turn on this option."
+msgstr ""
+"定位与位置基于字节百分比位置，而非 PCR 生成的时间位置。如果定位不正常，请开启"
+"本选项。"
+
+#: modules/demux/ts.c:133
+#, fuzzy
+msgid "Trust in-stream PCR"
+msgstr "传输流 ID"
+
+#: modules/demux/ts.c:134
+#, fuzzy
+msgid "Use the stream PCR as a reference."
+msgstr "保留一些 B 帧作为参考"
+
+#: modules/demux/ts.c:137
+msgid "MPEG Transport Stream demuxer"
+msgstr "MPEG 传输流去复用器"
+
+#: modules/demux/ts.c:171 modules/gui/macosx/MainMenu.m:435
+#: modules/gui/macosx/MainMenu.m:1578 modules/gui/qt4/dialogs/toolbar.cpp:512
+msgid "Teletext"
+msgstr "电报"
+
+#: modules/demux/ts.c:172
+msgid "Teletext subtitles"
+msgstr "Teletext 字幕"
+
+#: modules/demux/ts.c:173
+msgid "Teletext: additional information"
+msgstr "Teletext: 附加信息"
+
+#: modules/demux/ts.c:174
+msgid "Teletext: program schedule"
+msgstr "Teletext: 节目表"
+
+#: modules/demux/ts.c:175
+msgid "Teletext subtitles: hearing impaired"
+msgstr "Teletext 字幕: 听力障碍"
+
+#: modules/demux/ts.c:3632
+msgid "DVB subtitles: hearing impaired"
+msgstr "DVB 字幕: 听力障碍"
+
+#: modules/demux/ts.c:3910
+msgid "clean effects"
+msgstr "清除效果"
+
+#: modules/demux/ts.c:3911
+msgid "hearing impaired"
+msgstr "听力障碍"
+
+#: modules/demux/ts.c:3912
+msgid "visual impaired commentary"
+msgstr "可见的损坏报道"
+
+#: modules/demux/tta.c:45
+msgid "TTA demuxer"
+msgstr "TTA 去复用器"
+
+#: modules/demux/ty.c:59
+msgid "TY"
+msgstr "TY"
+
+#: modules/demux/ty.c:60
+msgid "TY Stream audio/video demux"
+msgstr "TY 流音频/视频去复用器"
+
+#: modules/demux/ty.c:777
+msgid "Closed captions 2"
+msgstr "封闭字幕 2"
+
+#: modules/demux/ty.c:778
+msgid "Closed captions 3"
+msgstr "封闭字幕 3"
+
+#: modules/demux/ty.c:779
+msgid "Closed captions 4"
+msgstr "封闭字幕 4"
+
+#: modules/demux/vc1.c:44
+msgid "Desired frame rate for the VC-1 stream."
+msgstr "VC-1 流的期望帧率。"
+
+#: modules/demux/vc1.c:50
+msgid "VC1 video demuxer"
+msgstr "VC1 去复用器"
+
+#: modules/demux/vobsub.c:49
+msgid "Vobsub subtitles parser"
+msgstr "Vobsub 字幕解释器"
+
+#: modules/demux/voc.c:43
+msgid "VOC demuxer"
+msgstr "VOC 去复用器"
+
+#: modules/demux/wav.c:47
+msgid "WAV demuxer"
+msgstr "WAV 去复用器"
+
+#: modules/demux/xa.c:43
+msgid "XA demuxer"
+msgstr "XA 去复用器"
+
+#: modules/demux/xiph_metadata.h:48
+msgid "Closed captions"
+msgstr "封闭字幕"
+
+#: modules/demux/xiph_metadata.h:50
+msgid "Textual audio descriptions"
+msgstr "原文音频描述"
+
+#: modules/demux/xiph_metadata.h:52
+msgid "Ticker text"
+msgstr "Ticker 文本"
+
+#: modules/demux/xiph_metadata.h:53
+msgid "Active regions"
+msgstr "活动区域"
+
+#: modules/demux/xiph_metadata.h:54
+msgid "Semantic annotations"
+msgstr "语义注解"
+
+#: modules/demux/xiph_metadata.h:56
+msgid "Transcript"
+msgstr "抄本"
+
+#: modules/demux/xiph_metadata.h:58
+msgid "Linguistic markup"
+msgstr "语言标记"
+
+#: modules/demux/xiph_metadata.h:59
+msgid "Cue points"
+msgstr "起始端点"
+
+#: modules/demux/xiph_metadata.h:63 modules/demux/xiph_metadata.h:67
+msgid "Subtitles (images)"
+msgstr "字幕 (图像)"
+
+#: modules/demux/xiph_metadata.h:68
+msgid "Slides (text)"
+msgstr "幻灯片 (文本)"
+
+#: modules/demux/xiph_metadata.h:69
+msgid "Slides (images)"
+msgstr "幻灯片 (图像)"
+
+#: modules/demux/xiph_metadata.c:405
+msgid "Unknown category"
+msgstr "未知类别"
+
+#: modules/gui/macosx/about.m:88 modules/gui/macosx/MainMenu.m:314
+msgid "About VLC media player"
+msgstr "关于 VLC media player"
+
+#: modules/gui/macosx/about.m:91 modules/gui/qt4/dialogs/help.cpp:125
+msgid "Credits"
+msgstr "贡献者名单"
+
+#: modules/gui/macosx/about.m:94 modules/gui/macosx/MainMenu.m:461
+#: modules/gui/qt4/dialogs/help.cpp:119
+msgid "License"
+msgstr "许可"
+
+#: modules/gui/macosx/about.m:97 modules/gui/qt4/dialogs/help.cpp:122
+msgid "Authors"
+msgstr "作者"
+
+#: modules/gui/macosx/about.m:100
+msgid ""
+"VLC media player and VideoLAN are trademarks of the VideoLAN Association."
+msgstr "VLC media player 及 VideoLAN 为 VideoLAN Association 的注册商标。"
+
+#: modules/gui/macosx/about.m:109
+msgid "Compiled by %s with %@"
+msgstr "编译者 %s，编译器 %@"
+
+#: modules/gui/macosx/about.m:126 modules/gui/qt4/dialogs/help.cpp:94
+msgid ""
+"<p>VLC media player is a free and open source media player, encoder, and "
+"streamer made by the volunteers of the <a href=\"http://www.videolan.org/"
+"\"><span style=\" text-decoration: underline; color:#0057ae;\">VideoLAN</"
+"span></a> community.</p><p>VLC uses its internal codecs, works on "
+"essentially every popular platform, and can read almost all files, CDs, "
+"DVDs, network streams, capture cards and other media formats!</p><p><a href="
+"\"http://www.videolan.org/contribute/\"><span style=\" text-decoration: "
+"underline; color:#0057ae;\">Help and join us!</span></a>"
+msgstr ""
+"<p>VLC media player 是由 <a href=\"http://www.videolan.org/\"><span style=\" "
+"text-decoration: underline; color:#0057ae;\">VideoLAN</span></a> 社区开发的自"
+"由开源媒体播放器、编码器及串流器。</p><p>VLC 使用内置的编解码器，能在几乎所有"
+"流行平台上运行，并能读取几乎所有文件、CD、DVD、网络串流、捕获设备及其他媒体格"
+"式!</p><p><a href=\"http://www.videolan.org/contribute/\"><span style=\" "
+"text-decoration: underline; color:#0057ae;\">帮助或加入我们!</span></a>"
+
+#: modules/gui/macosx/about.m:260
+msgid "VLC media player Help"
+msgstr "VLC media player 帮助"
+
+#: modules/gui/macosx/about.m:263 modules/gui/macosx/MainMenu.m:437
+#: modules/gui/macosx/MainMenu.m:1017
+msgid "Index"
+msgstr "索引"
+
+#: modules/gui/macosx/AddonManager.m:96 modules/gui/macosx/AddonManager.m:335
+#: modules/gui/qt4/dialogs/plugins.cpp:378
+#: modules/gui/qt4/managers/addons_manager.cpp:86
+#, fuzzy
+msgid "Playlist parsers"
+msgstr "Podcast 解析器"
+
+#: modules/gui/macosx/AddonManager.m:98 modules/gui/macosx/AddonManager.m:337
+#: modules/gui/qt4/dialogs/plugins.cpp:382
+#: modules/gui/qt4/managers/addons_manager.cpp:88
+#, fuzzy
+msgid "Service Discovery"
+msgstr "服务发现"
+
+#: modules/gui/macosx/AddonManager.m:100 modules/gui/macosx/AddonManager.m:339
+#: modules/gui/macosx/MainMenu.m:318 modules/gui/macosx/MainMenu.m:319
+#: modules/gui/qt4/dialogs/plugins.cpp:386
+#: modules/gui/qt4/managers/addons_manager.cpp:90
+msgid "Extensions"
+msgstr "扩展"
+
+#: modules/gui/macosx/AddonManager.m:103
+#, fuzzy
+msgid "Show Installed Only"
+msgstr "界面"
+
+#: modules/gui/macosx/AddonManager.m:105
+#: modules/gui/qt4/dialogs/plugins.cpp:414
+msgid "Find more addons online"
+msgstr ""
+
+#: modules/gui/macosx/AddonManager.m:115 modules/gui/macosx/MainMenu.m:320
+#: modules/gui/qt4/dialogs/plugins.cpp:80
+#, fuzzy
+msgid "Addons Manager"
+msgstr "视频管理器"
+
+#: modules/gui/macosx/AddonManager.m:118
+#: modules/gui/qt4/dialogs/plugins.cpp:1137
+#: modules/gui/qt4/dialogs/plugins.cpp:1150
+#, fuzzy
+msgid "Installed"
+msgstr "安装"
+
+#: modules/gui/macosx/AddonManager.m:119 modules/gui/macosx/bookmarks.m:105
+#: modules/gui/macosx/playlist.m:167 modules/gui/qt4/dialogs/plugins.cpp:123
+#: modules/mux/avi.c:53
+msgid "Name"
+msgstr "名称"
+
+#: modules/gui/macosx/AddonManager.m:120 modules/gui/macosx/MainMenu.m:73
+#: modules/gui/macosx/playlist.m:168 modules/gui/macosx/wizard.m:347
+#: modules/gui/qt4/dialogs/plugins.cpp:1367
+#: modules/gui/qt4/dialogs/plugins.cpp:1472 modules/mux/asf.c:58
+msgid "Author"
+msgstr "作者"
+
+#: modules/gui/macosx/AddonManager.m:187
+#, fuzzy
+msgid "Uninstall"
+msgstr "安装"
+
+#: modules/gui/macosx/AddonManager.m:333
+#: modules/gui/qt4/dialogs/plugins.cpp:374
+#: modules/gui/skins2/src/skin_main.cpp:507
+#: modules/gui/qt4/managers/addons_manager.cpp:84
+msgid "Skins"
+msgstr "外观"
+
+#: modules/gui/macosx/AudioEffects.m:113 modules/gui/qt4/ui/equalizer.h:135
+msgid "2 Pass"
+msgstr "2 重"
+
+#: modules/gui/macosx/AudioEffects.m:114
+#: modules/gui/qt4/components/extended_panels.cpp:1209
+#: modules/gui/qt4/ui/equalizer.h:137
+msgid "Preamp"
+msgstr "前置放大"
+
+#: modules/gui/macosx/AudioEffects.m:117
+msgid "Enable dynamic range compressor"
+msgstr "启用动态范围压缩器"
+
+#: modules/gui/macosx/AudioEffects.m:118 modules/gui/macosx/AudioEffects.m:129
+#: modules/gui/macosx/TrackSynchronization.m:60
+#: modules/gui/macosx/VideoEffects.m:96
+#: modules/gui/qt4/dialogs/gototime.cpp:66
+msgid "Reset"
+msgstr "复位"
+
+#: modules/gui/macosx/AudioEffects.m:120
+#: modules/gui/qt4/components/extended_panels.cpp:1373
+msgid "Attack"
+msgstr "激发"
+
+#: modules/gui/macosx/AudioEffects.m:121
+#: modules/gui/qt4/components/extended_panels.cpp:1374
+msgid "Release"
+msgstr "释放"
+
+#: modules/gui/macosx/AudioEffects.m:122
+#: modules/gui/qt4/components/extended_panels.cpp:1375
+msgid "Threshold"
+msgstr "阈值"
+
+#: modules/gui/macosx/AudioEffects.m:128
+msgid "Enable Spatializer"
+msgstr "启用 Spatializer"
+
+#: modules/gui/macosx/AudioEffects.m:137
+msgid "Headphone virtualization"
+msgstr "耳机虚拟化"
+
+#: modules/gui/macosx/AudioEffects.m:138
+msgid "Volume normalization"
+msgstr "音频规格化"
+
+#: modules/gui/macosx/AudioEffects.m:139
+msgid "Maximum level"
+msgstr "最大等级"
+
+#: modules/gui/macosx/AudioEffects.m:146
+msgid "Filter"
+msgstr "滤镜"
+
+#: modules/gui/macosx/AudioEffects.m:147 modules/gui/macosx/ControlsBar.m:507
+#: modules/gui/macosx/simple_prefs.m:309
+#: modules/gui/qt4/dialogs/extended.cpp:73
+msgid "Audio Effects"
+msgstr "音频效果"
+
+#: modules/gui/macosx/AudioEffects.m:185 modules/gui/macosx/VideoEffects.m:231
+msgid "Duplicate current profile..."
+msgstr "复制当前配置文件..."
+
+#: modules/gui/macosx/AudioEffects.m:190
+#: modules/gui/macosx/ConvertAndSave.m:1058
+msgid "Organize Profiles..."
+msgstr "管理配置文件..."
+
+#: modules/gui/macosx/AudioEffects.m:370 modules/gui/macosx/VideoEffects.m:877
+msgid "Duplicate current profile for a new profile"
+msgstr "将当前配置文件复制为新的配置文件"
+
+#: modules/gui/macosx/AudioEffects.m:371
+#: modules/gui/macosx/ConvertAndSave.m:371
+#: modules/gui/macosx/VideoEffects.m:878
+msgid "Enter a name for the new profile:"
+msgstr "输入新配置文件的名称:"
+
+#: modules/gui/macosx/AudioEffects.m:373 modules/gui/macosx/AudioEffects.m:614
+#: modules/gui/macosx/ConvertAndSave.m:373
+#: modules/gui/macosx/ConvertAndSave.m:405 modules/gui/macosx/output.m:456
+#: modules/gui/macosx/playlist.m:782 modules/gui/macosx/prefs.m:207
+#: modules/gui/macosx/simple_prefs.m:351 modules/gui/macosx/simple_prefs.m:416
+#: modules/gui/macosx/VideoEffects.m:880
+#: modules/gui/qt4/components/sout/profile_selector.cpp:424
+#: modules/gui/qt4/ui/vlm.h:302
+msgid "Save"
+msgstr "保存"
+
+#: modules/gui/macosx/AudioEffects.m:384 modules/gui/macosx/AudioEffects.m:709
+#: modules/gui/macosx/VideoEffects.m:940
+msgid "Remove a preset"
+msgstr "移除预设"
+
+#: modules/gui/macosx/AudioEffects.m:385 modules/gui/macosx/AudioEffects.m:710
+#: modules/gui/macosx/VideoEffects.m:941
+msgid "Select the preset you would like to remove:"
+msgstr "选择希望移除的预设:"
+
+#: modules/gui/macosx/AudioEffects.m:386 modules/gui/macosx/AudioEffects.m:711
+#: modules/gui/macosx/bookmarks.m:94 modules/gui/macosx/ConvertAndSave.m:385
+#: modules/gui/macosx/VideoEffects.m:942 modules/gui/qt4/ui/open_file.h:155
+msgid "Remove"
+msgstr "移除"
+
+#: modules/gui/macosx/AudioEffects.m:433
+msgid "Add new Preset..."
+msgstr "添加新的预设..."
+
+#: modules/gui/macosx/AudioEffects.m:438
+msgid "Organize Presets..."
+msgstr "组织预设..."
+
+#: modules/gui/macosx/AudioEffects.m:611
+msgid "Save current selection as new preset"
+msgstr "将当前选择另存为新的预设"
+
+#: modules/gui/macosx/AudioEffects.m:612
+msgid "Enter a name for the new preset:"
+msgstr "请输入新预设的名称:"
+
+#: modules/gui/macosx/AudioEffects.m:676 modules/gui/macosx/VideoEffects.m:903
+msgid "Please enter a unique name for the new profile."
+msgstr "请为新的配置文件输入唯一的名称。"
+
+#: modules/gui/macosx/AudioEffects.m:677 modules/gui/macosx/VideoEffects.m:904
+msgid "Multiple profiles with the same name are not allowed."
+msgstr "不允许多个配置文件共用同一个名称。"
+
+#: modules/gui/macosx/bookmarks.m:89
+msgid "Bookmarks"
+msgstr "书签"
+
+#: modules/gui/macosx/bookmarks.m:90
+#: modules/gui/qt4/ui/podcast_configuration.h:104
+#: modules/gui/qt4/ui/sout.h:210 modules/gui/qt4/ui/vlm.h:300
+msgid "Add"
+msgstr "添加"
+
+#: modules/gui/macosx/bookmarks.m:91 modules/gui/macosx/MainMenu.m:345
+#: modules/gui/macosx/simple_prefs.m:326
+#: modules/gui/qt4/dialogs/bookmarks.cpp:53 modules/gui/qt4/ui/vlm.h:301
+msgid "Clear"
+msgstr "清除"
+
+#: modules/gui/macosx/bookmarks.m:92 modules/gui/macosx/MainMenu.m:341
+msgid "Edit"
+msgstr "编辑"
+
+#: modules/gui/macosx/bookmarks.m:93 modules/gui/qt4/dialogs/bookmarks.cpp:57
+#: modules/video_filter/extract.c:75
+msgid "Extract"
+msgstr "释放"
+
+#: modules/gui/macosx/bookmarks.m:100 modules/gui/macosx/bookmarks.m:106
+#: modules/gui/qt4/dialogs/bookmarks.cpp:77
+#: modules/gui/qt4/dialogs/toolbar.cpp:464
+msgid "Time"
+msgstr "时间"
+
+#: modules/gui/macosx/bookmarks.m:103 modules/gui/macosx/bookmarks.m:220
+#: modules/gui/macosx/bookmarks.m:224 modules/gui/macosx/bookmarks.m:275
+#: modules/gui/macosx/bookmarks.m:280 modules/gui/macosx/controls.m:55
+#: modules/gui/macosx/ConvertAndSave.m:288
+#: modules/gui/macosx/ConvertAndSave.m:483
+#: modules/gui/macosx/ConvertAndSave.m:490
+#: modules/gui/macosx/ConvertAndSave.m:497 modules/gui/macosx/coredialogs.m:62
+#: modules/gui/macosx/coredialogs.m:99 modules/gui/macosx/coredialogs.m:146
+#: modules/gui/macosx/open.m:374 modules/gui/macosx/output.m:129
+#: modules/gui/macosx/playlistinfo.m:362 modules/gui/macosx/simple_prefs.m:325
+#: modules/gui/macosx/wizard.m:592 modules/gui/macosx/wizard.m:653
+#: modules/gui/macosx/wizard.m:992 modules/gui/macosx/wizard.m:1073
+#: modules/gui/macosx/wizard.m:1080 modules/gui/macosx/wizard.m:1608
+#: modules/gui/macosx/wizard.m:1616 modules/gui/macosx/wizard.m:1788
+#: modules/gui/macosx/wizard.m:1799 modules/gui/macosx/wizard.m:1812
+#: modules/gui/qt4/components/open_panels.cpp:1333
+msgid "OK"
+msgstr "确定"
+
+#: modules/gui/macosx/bookmarks.m:135 modules/gui/macosx/playlist.m:772
+msgid "Untitled"
+msgstr "无标题"
+
+#: modules/gui/macosx/bookmarks.m:220
+msgid "No input"
+msgstr "无输入"
+
+#: modules/gui/macosx/bookmarks.m:220
+msgid ""
+"No input found. A stream must be playing or paused for bookmarks to work."
+msgstr "找不到输入。必须有一个正在播放或暂停的流书签才能工作。"
+
+#: modules/gui/macosx/bookmarks.m:224
+msgid "Input has changed"
+msgstr "输入已被更改"
+
+#: modules/gui/macosx/bookmarks.m:224
+msgid ""
+"Input has changed, unable to save bookmark. Suspending playback with \"Pause"
+"\" while editing bookmarks to ensure to keep the same input."
+msgstr ""
+"输入已被更改，无法保存书签。在确认正在编辑的书签有相同的输入时通过 \"暂停\" "
+"终止播放。"
+
+#: modules/gui/macosx/bookmarks.m:275 modules/gui/macosx/wizard.m:992
+msgid "Invalid selection"
+msgstr "无效的选择"
+
+#: modules/gui/macosx/bookmarks.m:275
+msgid "Two bookmarks have to be selected."
+msgstr "选定了两个书签。"
+
+#: modules/gui/macosx/bookmarks.m:280
+msgid "No input found"
+msgstr "找不到输入"
+
+#: modules/gui/macosx/bookmarks.m:280
+msgid "The stream must be playing or paused for bookmarks to work."
+msgstr "必须是一个正在播放或暂停的流书签才能工作。"
+
+#: modules/gui/macosx/BWQuincyUI.m:78
+#, fuzzy
+msgid "Show Details"
+msgstr "编码详细信息"
+
+#: modules/gui/macosx/BWQuincyUI.m:79
+#, fuzzy
+msgid "Hide Details"
+msgstr "编码详细信息"
+
+#: modules/gui/macosx/BWQuincyUI.m:81
+msgid "Send"
+msgstr "发送"
+
+#: modules/gui/macosx/BWQuincyUI.m:82
+msgid ""
+"%@ unexpectedly quit the last time it was run. Would you like to send a "
+"crash report to %@?"
+msgstr ""
+
+#: modules/gui/macosx/BWQuincyUI.m:83
+#: modules/gui/qt4/components/info_panels.cpp:171
+msgid "Comments"
+msgstr "注释"
+
+#: modules/gui/macosx/BWQuincyUI.m:84
+msgid "Problem details and system configuration"
+msgstr ""
+
+#: modules/gui/macosx/BWQuincyUI.m:175
+msgid "Problem Report for %@"
+msgstr ""
+
+#: modules/gui/macosx/BWQuincyUI.m:177
+msgid "Please describe any steps needed to trigger the problem"
+msgstr ""
+
+#: modules/gui/macosx/BWQuincyUI.m:178
+msgid "No personal information will be sent with this report."
+msgstr ""
+
+#: modules/gui/macosx/controls.m:53 modules/gui/macosx/controls.m:57
+#: modules/gui/macosx/MainMenu.m:1527
+#, fuzzy
+msgid "Jump to Time"
+msgstr "跳转到时间"
+
+#: modules/gui/macosx/controls.m:56
+msgid "sec."
+msgstr "秒"
+
+#: modules/gui/macosx/ControlsBar.m:56 modules/gui/macosx/fspanel.m:420
+msgid "Click to play or pause the current media."
+msgstr "点击可播放或暂停当前媒体。"
+
+#: modules/gui/macosx/ControlsBar.m:59 modules/gui/macosx/fspanel.m:419
+msgid "Backward"
+msgstr "块退"
+
+#: modules/gui/macosx/ControlsBar.m:60 modules/gui/macosx/ControlsBar.m:184
+msgid ""
+"Click to go to the previous playlist item. Hold to skip backward through the "
+"current media."
+msgstr "点击可转到播放列表中的前一项。长按快退。"
+
+#: modules/gui/macosx/ControlsBar.m:63 modules/gui/macosx/fspanel.m:421
+msgid "Forward"
+msgstr "快进"
+
+#: modules/gui/macosx/ControlsBar.m:64 modules/gui/macosx/ControlsBar.m:185
+msgid ""
+"Click to go to the next playlist item. Hold to skip forward through the "
+"current media."
+msgstr "点击可转到播放列表中的下一项。长按可快进。"
+
+#: modules/gui/macosx/ControlsBar.m:68 modules/gui/macosx/fspanel.m:447
+msgid ""
+"Click and move the mouse while keeping the button pressed to use this slider "
+"to change current playback position."
+msgstr "在本滑动区域按住左键并移动鼠标，可更改当前回放位置。"
+
+#: modules/gui/macosx/ControlsBar.m:71 modules/gui/macosx/fspanel.m:423
+msgid "Toggle Fullscreen mode"
+msgstr "切换全屏模式"
+
+#: modules/gui/macosx/ControlsBar.m:72
+msgid "Click to enable fullscreen video playback."
+msgstr "点击可启用全屏视频回放。"
+
+#: modules/gui/macosx/ControlsBar.m:176 modules/gui/macosx/fspanel.m:419
+msgid "Click and hold to skip backward through the current media."
+msgstr "按住可对当前媒体快退播放。"
+
+#: modules/gui/macosx/ControlsBar.m:177 modules/gui/macosx/fspanel.m:421
+msgid "Click and hold to skip forward through the current media."
+msgstr "按住可对当前媒体快进播放。"
+
+#: modules/gui/macosx/ControlsBar.m:482
+msgid "Click to stop playback."
+msgstr "点击可停止回放。"
+
+#: modules/gui/macosx/ControlsBar.m:485
+msgid "Show/Hide Playlist"
+msgstr "显示/隐藏播放列表"
+
+#: modules/gui/macosx/ControlsBar.m:486
+msgid ""
+"Click to switch between video output and playlist. If no video is shown in "
+"the main window, this allows you to hide the playlist."
+msgstr ""
+"点击可在视频输出与播放列表之间切换。如果主窗口中没有视频显示，则可以隐藏播放"
+"列表。"
+
+#: modules/gui/macosx/ControlsBar.m:489 modules/gui/qt4/dialogs/vlm.cpp:560
+#: share/lua/http/index.html:241
+msgid "Repeat"
+msgstr "重复"
+
+#: modules/gui/macosx/ControlsBar.m:490
+msgid ""
+"Click to change repeat mode. There are 3 states: repeat one, repeat all and "
+"off."
+msgstr "点击可更改重复模式。有3 种状态可选: 单曲重复、全部重复、不重复。"
+
+#: modules/gui/macosx/ControlsBar.m:493 share/lua/http/index.html:239
+msgid "Shuffle"
+msgstr "随机"
+
+#: modules/gui/macosx/ControlsBar.m:495
+msgid "Click to enable or disable random playback."
+msgstr "点击可启用或禁用随机回放。"
+
+#: modules/gui/macosx/ControlsBar.m:498 modules/gui/macosx/fspanel.m:466
+msgid ""
+"Click and move the mouse while keeping the button pressed to use this slider "
+"to change the volume."
+msgstr "在本滑动区域按住左键并移动鼠标可更改音量大小。"
+
+#: modules/gui/macosx/ControlsBar.m:501
+msgid "Click to mute or unmute the audio."
+msgstr "点击可静音或取消静音。"
+
+#: modules/gui/macosx/ControlsBar.m:503
+msgid "Full Volume"
+msgstr "最大音量"
+
+#: modules/gui/macosx/ControlsBar.m:504
+msgid "Click to play the audio at maximum volume."
+msgstr "点击可以最大音量播放音频。"
+
+#: modules/gui/macosx/ControlsBar.m:508
+msgid ""
+"Click to show an Audio Effects panel featuring an equalizer and further "
+"filters."
+msgstr "点击可显示“音频效果”面板，其中含有均衡器及其他过滤器等功能。"
+
+#: modules/gui/macosx/ControlsBar.m:762 modules/gui/macosx/fspanel.m:418
+msgid "Click to go to the previous playlist item."
+msgstr "点击可转到播放列表中的前一项。"
+
+#: modules/gui/macosx/ControlsBar.m:773 modules/gui/macosx/fspanel.m:422
+msgid "Click to go to the next playlist item."
+msgstr "点击可转到播放列表中的后一项。"
+
+#: modules/gui/macosx/ConvertAndSave.m:152
+msgid "Convert & Stream"
+msgstr "转换 & "
+
+#: modules/gui/macosx/ConvertAndSave.m:153
+msgid "Go!"
+msgstr "开始!"
+
+#: modules/gui/macosx/ConvertAndSave.m:154 modules/gui/macosx/MainWindow.m:178
+msgid "Drop media here"
+msgstr "在此拖入媒体"
+
+#: modules/gui/macosx/ConvertAndSave.m:155 modules/gui/macosx/MainWindow.m:176
+msgid "Open media..."
+msgstr "打开媒体..."
+
+#: modules/gui/macosx/ConvertAndSave.m:156
+msgid "Choose Profile"
+msgstr "选择配置文件"
+
+#: modules/gui/macosx/ConvertAndSave.m:157
+msgid "Customize..."
+msgstr "自定义..."
+
+#: modules/gui/macosx/ConvertAndSave.m:158
+msgid "Choose Destination"
+msgstr "选择目标位置"
+
+#: modules/gui/macosx/ConvertAndSave.m:159
+msgid "Choose an output location"
+msgstr "选择一个输出位置"
+
+#: modules/gui/macosx/ConvertAndSave.m:161 modules/gui/macosx/open.m:138
+#: modules/gui/macosx/open.m:361 modules/gui/macosx/output.m:136
+#: modules/gui/macosx/prefs_widgets.m:1121
+#: modules/gui/macosx/simple_prefs.m:333 modules/gui/macosx/simple_prefs.m:403
+#: modules/gui/qt4/components/preferences_widgets.cpp:264
+#: modules/gui/qt4/components/simple_preferences.cpp:470
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:111
+#: modules/gui/qt4/ui/open.h:264 modules/gui/qt4/ui/open_disk.h:308
+#: modules/gui/qt4/ui/open_file.h:148 modules/gui/qt4/ui/sprefs_audio.h:434
+#: modules/gui/qt4/ui/sprefs_input.h:357 modules/gui/qt4/ui/sprefs_video.h:341
+msgid "Browse..."
+msgstr "浏览..."
+
+#: modules/gui/macosx/ConvertAndSave.m:162
+msgid "Setup Streaming..."
+msgstr "配置串流传输..."
+
+#: modules/gui/macosx/ConvertAndSave.m:164
+msgid "Save as File"
+msgstr "另存为文件"
+
+#: modules/gui/macosx/ConvertAndSave.m:165
+#: modules/gui/macosx/ConvertAndSave.m:420 modules/gui/macosx/output.m:134
+#: modules/gui/macosx/output.m:236 modules/gui/macosx/output.m:352
+msgid "Stream"
+msgstr "流"
+
+#: modules/gui/macosx/ConvertAndSave.m:167
+#: modules/gui/macosx/ConvertAndSave.m:193
+msgid "Apply"
+msgstr "应用"
+
+#: modules/gui/macosx/ConvertAndSave.m:169
+msgid "Save as new Profile..."
+msgstr "另存为新的配置文件..."
+
+#: modules/gui/macosx/ConvertAndSave.m:170 modules/gui/qt4/ui/profiles.h:709
+msgid "Encapsulation"
+msgstr "封装"
+
+#: modules/gui/macosx/ConvertAndSave.m:171
+#: share/lua/http/dialogs/create_stream.html:160
+#: modules/gui/qt4/ui/profiles.h:735
+msgid "Video codec"
+msgstr "视频编解码器"
+
+#: modules/gui/macosx/ConvertAndSave.m:172
+#: share/lua/http/dialogs/create_stream.html:178
+#: modules/gui/qt4/ui/profiles.h:745
+msgid "Audio codec"
+msgstr "音频编解码器"
+
+#: modules/gui/macosx/ConvertAndSave.m:176 modules/gui/qt4/ui/profiles.h:711
+msgid "Keep original video track"
+msgstr "保持原视频轨"
+
+#: modules/gui/macosx/ConvertAndSave.m:181 modules/gui/qt4/ui/profiles.h:724
+msgid ""
+"You just need to fill one of the three following parameters, VLC will "
+"autodetect the other using the original aspect ratio"
+msgstr ""
+"您只需填写下列三个参数中的任意一个，VLC 将使用原始宽高比自动确定其他两项"
+
+#: modules/gui/macosx/ConvertAndSave.m:184 modules/gui/macosx/output.m:157
+#: modules/gui/qt4/ui/profiles.h:725
+msgid "Scale"
+msgstr "比例"
+
+#: modules/gui/macosx/ConvertAndSave.m:186 modules/gui/qt4/ui/profiles.h:737
+msgid "Keep original audio track"
+msgstr "保持原音频轨"
+
+#: modules/gui/macosx/ConvertAndSave.m:192 modules/gui/qt4/ui/profiles.h:748
+msgid "Overlay subtitles on the video"
+msgstr "将字幕覆盖在视频上"
+
+#: modules/gui/macosx/ConvertAndSave.m:195
+msgid "Stream Destination"
+msgstr "串流目标位置"
+
+#: modules/gui/macosx/ConvertAndSave.m:196
+msgid "Stream Announcement"
+msgstr "串流广播"
+
+#: modules/gui/macosx/ConvertAndSave.m:198 modules/gui/macosx/open.m:188
+#: modules/gui/macosx/output.m:137
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:215
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:302
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:344
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:399
+msgid "Address"
+msgstr "地址"
+
+#: modules/gui/macosx/ConvertAndSave.m:199
+msgid "TTL"
+msgstr "生存时间"
+
+#: modules/gui/macosx/ConvertAndSave.m:202 modules/gui/macosx/open.m:176
+#: modules/gui/macosx/open.m:178 modules/gui/macosx/output.m:138
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:161
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:216
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:257
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:303
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:400 modules/lua/vlc.c:64
+#: modules/stream_out/rtp.c:116
+#: share/lua/http/dialogs/stream_config_window.html:32
+#: share/lua/http/dialogs/stream_window.html:91
+msgid "Port"
+msgstr "端口"
+
+#: modules/gui/macosx/ConvertAndSave.m:203 modules/gui/macosx/output.m:172
+#: modules/gui/macosx/wizard.m:400 modules/gui/macosx/wizard.m:432
+#: modules/gui/macosx/wizard.m:1798
+msgid "SAP Announcement"
+msgstr "SAP 广播"
+
+#: modules/gui/macosx/ConvertAndSave.m:205 modules/gui/macosx/output.m:174
+#: modules/gui/macosx/output.m:549
+msgid "HTTP Announcement"
+msgstr "HTTP 广播"
+
+#: modules/gui/macosx/ConvertAndSave.m:206 modules/gui/macosx/output.m:173
+#: modules/gui/macosx/output.m:545
+msgid "RTSP Announcement"
+msgstr "RTSP 广播"
+
+#: modules/gui/macosx/ConvertAndSave.m:207 modules/gui/macosx/output.m:175
+#: modules/gui/macosx/output.m:553
+msgid "Export SDP as file"
+msgstr "导出 SDP 为文件"
+
+#: modules/gui/macosx/ConvertAndSave.m:288
+msgid "Invalid container format for HTTP streaming"
+msgstr "无效容器格式，不支持 HTTP 串流"
+
+#: modules/gui/macosx/ConvertAndSave.m:290
+msgid ""
+"Media encapsulated as %@ cannot be streamed through the HTTP protocol for "
+"technical reasons."
+msgstr "由于技术原因，封装为 %@ 的媒体无法通过 HTTP 协议串流传输。"
+
+#: modules/gui/macosx/ConvertAndSave.m:370
+msgid "Save as new profile"
+msgstr "另存为新的配置文件"
+
+#: modules/gui/macosx/ConvertAndSave.m:383
+msgid "Remove a profile"
+msgstr "移除配置文件"
+
+#: modules/gui/macosx/ConvertAndSave.m:384
+msgid "Select the profile you would like to remove:"
+msgstr "选择希望移除的配置文件:"
+
+#: modules/gui/macosx/ConvertAndSave.m:472
+msgid "%@ stream to %@:%@"
+msgstr "%@ 串流到 %@:%@"
+
+#: modules/gui/macosx/ConvertAndSave.m:482
+msgid "No Address given"
+msgstr "未给定地址"
+
+#: modules/gui/macosx/ConvertAndSave.m:484
+msgid "In order to stream, a valid destination address is required."
+msgstr "若要串流，必须提供有效的目标地址。"
+
+#: modules/gui/macosx/ConvertAndSave.m:489
+msgid "No Channel Name given"
+msgstr "未给定频道名称"
+
+#: modules/gui/macosx/ConvertAndSave.m:491
+msgid ""
+"SAP stream announcement is enabled. However, no channel name is provided."
+msgstr "已启用 SAP 串流广播。但未提供频道名称。"
+
+#: modules/gui/macosx/ConvertAndSave.m:496
+msgid "No SDP URL given"
+msgstr "未给定 SDP URL"
+
+#: modules/gui/macosx/ConvertAndSave.m:498
+msgid "A SDP export is requested, but no URL is provided."
+msgstr "已请求 SDP 导出，但未提供 URL。"
+
+#: modules/gui/macosx/ConvertAndSave.m:1056
+#: modules/gui/macosx/simple_prefs.m:704 modules/gui/macosx/simple_prefs.m:728
+#: modules/gui/macosx/simple_prefs.m:1284
+#: modules/gui/qt4/components/simple_preferences.cpp:686
+msgid "Custom"
+msgstr "自定义"
+
+#: modules/gui/macosx/coredialogs.m:59 modules/gui/macosx/simple_prefs.m:315
+#: modules/gui/qt4/dialogs/external.cpp:113
+msgid "User name"
+msgstr "用户名"
+
+#: modules/gui/macosx/coredialogs.m:243
+msgid "Errors and Warnings"
+msgstr "错误和警告"
+
+#: modules/gui/macosx/coredialogs.m:244
+msgid "Clean up"
+msgstr "清除"
+
+#: modules/gui/macosx/CoreInteraction.m:364
+msgid "Random On"
+msgstr "随机开"
+
+#: modules/gui/macosx/CoreInteraction.m:434
+msgid "Repeat Off"
+msgstr "重复关"
+
+#: modules/gui/macosx_dialog_provider/dialogProvider.m:86
+msgid "Hide no user action dialogs"
+msgstr "隐藏无用户操作的对话框"
+
+#: modules/gui/macosx_dialog_provider/dialogProvider.m:87
+msgid ""
+"Don't display dialogs that don't require user action (Critical and error "
+"panel)."
+msgstr "不要显示不需要用户操作的对话框 (关键信息与错误信息板)。"
+
+#: modules/gui/macosx/fspanel.m:407
+msgid "(no item is being played)"
+msgstr "(没有被播放的项目)"
+
+#: modules/gui/macosx/fspanel.m:423
+msgid "Click to exit fullscreen playback."
+msgstr "点击可退出全屏回放。"
+
+#: modules/gui/macosx/intf.m:1452 modules/gui/macosx/intf.m:1469
+msgid "VLC media playback"
+msgstr "VLC 媒体回放"
+
+#: modules/gui/macosx/intf.m:1727
+msgid "Remove old preferences?"
+msgstr "要移除旧的参数吗?"
+
+#: modules/gui/macosx/intf.m:1728
+msgid "We just found an older version of VLC's preferences files."
+msgstr "我们发现了一个旧版本的 VLC 参数文件。"
+
+#: modules/gui/macosx/intf.m:1729
+msgid "Move To Trash and Relaunch VLC"
+msgstr "移动到回收站并重新启动 VLC"
+
+#: modules/gui/macosx/macosx.m:50
+msgid "Video device"
+msgstr "视频设备"
+
+#: modules/gui/macosx/macosx.m:51
+msgid ""
+"Number of the screen to use by default to display videos in 'fullscreen'. "
+"The screen number correspondance can be found in the video device selection "
+"menu."
+msgstr ""
+"在 '全屏幕' 中用于显示默认视频的屏幕数量。屏幕数量可以在视频设备中被找到。"
+
+#: modules/gui/macosx/macosx.m:55
+msgid "Opaqueness"
+msgstr "不透明"
+
+#: modules/gui/macosx/macosx.m:56
+msgid ""
+"Set the transparency of the video output. 1 is non-transparent (default) 0 "
+"is fully transparent."
+msgstr "设置视频输出的透明度。1 是非透明 (默认) 0 是完全透明。"
+
+#: modules/gui/macosx/macosx.m:59
+msgid "Black screens in fullscreen"
+msgstr "全屏幕中的黑屏"
+
+#: modules/gui/macosx/macosx.m:60
+msgid "In fullscreen mode, keep screen where there is no video displayed black"
+msgstr "在全屏幕模式中保持没有显示视频的地方为黑色"
+
+#: modules/gui/macosx/macosx.m:63
+msgid "Show Fullscreen controller"
+msgstr "显示全屏控制器"
+
+#: modules/gui/macosx/macosx.m:64
+msgid "Shows a lucent controller when moving the mouse in fullscreen mode."
+msgstr "在全屏模式中移动鼠标时显示一个透明的控制器。"
+
+#: modules/gui/macosx/macosx.m:67
+msgid "Auto-playback of new items"
+msgstr "自动播放新项目"
+
+#: modules/gui/macosx/macosx.m:68
+msgid "Start playback of new items immediately once they were added."
+msgstr "在添加新项目后立即开始播放。"
+
+#: modules/gui/macosx/macosx.m:71
+msgid "Keep Recent Items"
+msgstr "保持最近使用的项目"
+
+#: modules/gui/macosx/macosx.m:72
+msgid ""
+"By default, VLC keeps a list of the last 10 items. This feature can be "
+"disabled here."
+msgstr "默认情况下，VLC 将保留最近使用的 10 个项目。该功能可以在此关闭。"
+
+#: modules/gui/macosx/macosx.m:75 modules/gui/macosx/simple_prefs.m:363
+msgid "Control playback with the Apple Remote"
+msgstr "使用 Apple Remote 控制回放"
+
+#: modules/gui/macosx/macosx.m:76
+msgid "By default, VLC can be remotely controlled with the Apple Remote."
+msgstr "默认情况下，VLC 可以使用 Apple Remote 远程操控。"
+
+#: modules/gui/macosx/macosx.m:78 modules/gui/macosx/simple_prefs.m:364
+msgid "Control system volume with the Apple Remote"
+msgstr "通过 Apple Remote 控制系统音量"
+
+#: modules/gui/macosx/macosx.m:79
+msgid ""
+"By default, VLC will control its own volume with the Apple Remote. However, "
+"you can choose to control the global system volume instead."
+msgstr ""
+"VLC 默认通过 Apple Remote 控制软件自身的音量。但您可以选择改为控制全局系统音"
+"量。"
+
+#: modules/gui/macosx/macosx.m:81
+msgid "Control playlist items with the Apple Remote"
+msgstr "通过 Apple Remote 控制播放列表项目"
+
+#: modules/gui/macosx/macosx.m:82
+msgid ""
+"By default, VLC will allow you to switch to the next or previous item with "
+"the Apple Remote. You can disable this behavior with this option."
+msgstr ""
+"VLC 默认允许通过 Apple Remote 切换到播放列表中的上一项或下一项。您可以通过本"
+"选项禁用该功能。"
+
+#: modules/gui/macosx/macosx.m:84 modules/gui/macosx/simple_prefs.m:365
+msgid "Control playback with media keys"
+msgstr "使用媒体键控制回放"
+
+#: modules/gui/macosx/macosx.m:85
+msgid ""
+"By default, VLC can be controlled using the media keys on modern Apple "
+"keyboards."
+msgstr "默认情况下，VLC 可以使用现代 Apple 键盘的媒体按键操控。"
+
+#: modules/gui/macosx/macosx.m:88
+msgid "Run VLC with dark interface style"
+msgstr "以深色界面风格运行 VLC"
+
+#: modules/gui/macosx/macosx.m:89
+msgid ""
+"If this option is enabled, VLC will use the dark interface style. Otherwise, "
+"the grey interface style is used."
+msgstr "若启用本选项，VLC 将使用深色界面风格。否则将使用灰色界面风格。"
+
+#: modules/gui/macosx/macosx.m:91 modules/gui/macosx/simple_prefs.m:360
+msgid "Use the native fullscreen mode"
+msgstr "使用原生全屏模式"
+
+#: modules/gui/macosx/macosx.m:92
+msgid ""
+"By default, VLC uses the fullscreen mode known from previous Mac OS X "
+"releases. It can also use the native fullscreen mode on Mac OS X 10.7 and "
+"later."
+msgstr ""
+"VLC 默认使用早期 Mac OS X 发行版中的全屏模式。也可以使用 Mac OS X 10.7 或更高"
+"版本提供的原生全屏模式。"
+
+#: modules/gui/macosx/macosx.m:94 modules/gui/macosx/simple_prefs.m:370
+#: modules/gui/qt4/qt4.cpp:92
+msgid "Resize interface to the native video size"
+msgstr "缩放界面至原生视频大小"
+
+#: modules/gui/macosx/macosx.m:95 modules/gui/qt4/qt4.cpp:93
+msgid ""
+"You have two choices:\n"
+" - The interface will resize to the native video size\n"
+" - The video will fit to the interface size\n"
+" By default, interface resize to the native video size."
+msgstr ""
+"您可以选择:\n"
+" - 界面将被缩放至视频大小\n"
+" - 视频将被缩放至适合界面的大小\n"
+" 默认状况下，界面将被缩放至视频大小。"
+
+#: modules/gui/macosx/macosx.m:100 modules/gui/macosx/simple_prefs.m:371
+#: modules/gui/qt4/qt4.cpp:176
+msgid "Pause the video playback when minimized"
+msgstr "最小化时暂停视频回放"
+
+#: modules/gui/macosx/macosx.m:101 modules/gui/qt4/qt4.cpp:178
+msgid ""
+"With this option enabled, the playback will be automatically paused when "
+"minimizing the window."
+msgstr "启用本项后，最小化窗口时回放将自动暂停。"
+
+#: modules/gui/macosx/macosx.m:104 modules/gui/qt4/qt4.cpp:180
+msgid "Allow automatic icon changes"
+msgstr "允许自动更改图标"
+
+#: modules/gui/macosx/macosx.m:105 modules/gui/qt4/qt4.cpp:182
+msgid ""
+"This option allows the interface to change its icon on various occasions."
+msgstr "本选项允许界面在各种情况下自动更改图标。"
+
+#: modules/gui/macosx/macosx.m:107 modules/gui/macosx/MainMenu.m:1361
+msgid "Lock Aspect Ratio"
+msgstr "锁定宽高比"
+
+#: modules/gui/macosx/macosx.m:109 modules/gui/macosx/MainMenu.m:349
+msgid "Show Previous & Next Buttons"
+msgstr "显示“向前”“向后”按钮"
+
+#: modules/gui/macosx/macosx.m:110
+msgid "Shows the previous and next buttons in the main window."
+msgstr "在主窗口中显示向前与向后按钮。"
+
+#: modules/gui/macosx/macosx.m:112 modules/gui/macosx/MainMenu.m:351
+msgid "Show Shuffle & Repeat Buttons"
+msgstr "显示“随机”“重复”按钮"
+
+#: modules/gui/macosx/macosx.m:113
+msgid "Shows the shuffle and repeat buttons in the main window."
+msgstr "在主窗口中显示随机与重复按钮。"
+
+#: modules/gui/macosx/macosx.m:115 modules/gui/macosx/MainMenu.m:353
+msgid "Show Audio Effects Button"
+msgstr "显示音频效果按钮"
+
+#: modules/gui/macosx/macosx.m:116
+msgid "Shows the audio effects button in the main window."
+msgstr "在主窗口显示音频效果按钮。"
+
+#: modules/gui/macosx/macosx.m:118 modules/gui/macosx/MainMenu.m:355
+msgid "Show Sidebar"
+msgstr "显示侧边栏"
+
+#: modules/gui/macosx/macosx.m:119
+msgid "Shows a sidebar in the main window listing media sources."
+msgstr "在主窗口中显示侧边栏，列出媒体来源。"
+
+#: modules/gui/macosx/macosx.m:121 modules/gui/macosx/simple_prefs.m:374
+#, fuzzy
+msgid "Control external music players"
+msgstr "用于播放器的控制菜单"
+
+#: modules/gui/macosx/macosx.m:122
+msgid "VLC will pause and resume supported music players on playback."
+msgstr ""
+
+#: modules/gui/macosx/macosx.m:124
+msgid "Use large text for list views"
+msgstr ""
+
+#: modules/gui/macosx/macosx.m:129
+msgid "Do nothing"
+msgstr "不执行任何操作"
+
+#: modules/gui/macosx/macosx.m:129
+#, fuzzy
+msgid "Pause iTunes / Spotify"
+msgstr "暂停 iTunes"
+
+#: modules/gui/macosx/macosx.m:129
+#, fuzzy
+msgid "Pause and resume iTunes / Spotify"
+msgstr "暂停与继续 iTunes"
+
+#: modules/gui/macosx/macosx.m:132
+msgid "Continue playback where you left off"
+msgstr ""
+
+#: modules/gui/macosx/macosx.m:133
+msgid ""
+"VLC will store playback positions of the last 30 items you played. If you re-"
+"open one of those, playback will continue."
+msgstr ""
+
+#: modules/gui/macosx/macosx.m:138
+msgid "Ask"
+msgstr "询问"
+
+#: modules/gui/macosx/macosx.m:138 modules/gui/qt4/qt4.cpp:192
+msgid "Always"
+msgstr "总是"
+
+#: modules/gui/macosx/macosx.m:138 modules/gui/qt4/qt4.cpp:192
+msgid "Never"
+msgstr "从不"
+
+#: modules/gui/macosx/macosx.m:141 modules/gui/qt4/qt4.cpp:184
+msgid "Maximum Volume displayed"
+msgstr "显示的最大音量"
+
+#: modules/gui/macosx/macosx.m:145
+msgid "Mac OS X interface"
+msgstr "Mac OS X 界面"
+
+#: modules/gui/macosx/macosx.m:152
+msgid "Appearance"
+msgstr "外观"
+
+#: modules/gui/macosx/macosx.m:163
+msgid "Behavior"
+msgstr "行为"
+
+#: modules/gui/macosx/macosx.m:175
+msgid "Apple Remote and media keys"
+msgstr "Apple Remote 及 "
+
+#: modules/gui/macosx/macosx.m:190
+msgid "Video output"
+msgstr "视频输出"
+
+#: modules/gui/macosx/MainMenu.m:71
+msgid "Track Number"
+msgstr "轨道号"
+
+#: modules/gui/macosx/MainMenu.m:74 modules/gui/macosx/playlist.m:169
+#: modules/gui/macosx/wizard.m:349
+#: modules/gui/qt4/components/playlist/sorting.h:56
+msgid "Duration"
+msgstr "持续时间"
+
+#: modules/gui/macosx/MainMenu.m:80
+#: modules/gui/qt4/components/playlist/sorting.h:62
+msgid "URI"
+msgstr "URI"
+
+#: modules/gui/macosx/MainMenu.m:81
+#, fuzzy
+msgid "File Size"
+msgstr "双倍尺寸"
+
+#: modules/gui/macosx/MainMenu.m:316
+msgid "Check for Update..."
+msgstr "检测更新..."
+
+#: modules/gui/macosx/MainMenu.m:317
+msgid "Preferences..."
+msgstr "参数设置..."
+
+#: modules/gui/macosx/MainMenu.m:323
+msgid "Services"
+msgstr "服务"
+
+#: modules/gui/macosx/MainMenu.m:324
+msgid "Hide VLC"
+msgstr "隐藏 VLC"
+
+#: modules/gui/macosx/MainMenu.m:325
+msgid "Hide Others"
+msgstr "隐藏其它"
+
+#: modules/gui/macosx/MainMenu.m:326 modules/gui/macosx/simple_prefs.m:413
+msgid "Show All"
+msgstr "全部显示"
+
+#: modules/gui/macosx/MainMenu.m:327
+msgid "Quit VLC"
+msgstr "退出 VLC"
+
+#: modules/gui/macosx/MainMenu.m:329
+msgid "1:File"
+msgstr "1:文件"
+
+#: modules/gui/macosx/MainMenu.m:330
+msgid "Advanced Open File..."
+msgstr "高级打开文件..."
+
+#: modules/gui/macosx/MainMenu.m:331
+msgid "Open File..."
+msgstr "打开文件..."
+
+#: modules/gui/macosx/MainMenu.m:332
+msgid "Open Disc..."
+msgstr "打开光盘..."
+
+#: modules/gui/macosx/MainMenu.m:333
+msgid "Open Network..."
+msgstr "打开网络..."
+
+#: modules/gui/macosx/MainMenu.m:334
+msgid "Open Capture Device..."
+msgstr "打开捕获设备..."
+
+#: modules/gui/macosx/MainMenu.m:335
+msgid "Open Recent"
+msgstr "打开历史"
+
+#: modules/gui/macosx/MainMenu.m:336
+msgid "Close Window"
+msgstr "关闭窗口"
+
+#: modules/gui/macosx/MainMenu.m:337
+msgid "Streaming/Exporting Wizard..."
+msgstr "流/导出向导..."
+
+#: modules/gui/macosx/MainMenu.m:338
+msgid "Convert / Stream..."
+msgstr "转换 / 串流"
+
+#: modules/gui/macosx/MainMenu.m:339
+msgid "Save Playlist..."
+msgstr "保存播放列表..."
+
+#: modules/gui/macosx/MainMenu.m:342
+msgid "Cut"
+msgstr "剪切"
+
+#: modules/gui/macosx/MainMenu.m:343
+msgid "Copy"
+msgstr "复制"
+
+#: modules/gui/macosx/MainMenu.m:344
+msgid "Paste"
+msgstr "粘帖"
+
+#: modules/gui/macosx/MainMenu.m:346 modules/gui/macosx/playlist.m:585
+msgid "Select All"
+msgstr "全部选择"
+
+#: modules/gui/macosx/MainMenu.m:348
+msgid "View"
+msgstr "查看"
+
+#: modules/gui/macosx/MainMenu.m:357 modules/gui/macosx/MainMenu.m:358
+msgid "Playlist Table Columns"
+msgstr "播放列表表头栏目"
+
+#: modules/gui/macosx/MainMenu.m:360
+msgid "Playback"
+msgstr "播放"
+
+#: modules/gui/macosx/MainMenu.m:365 modules/gui/macosx/MainMenu.m:366
+msgid "Playback Speed"
+msgstr "回放速度"
+
+#: modules/gui/macosx/MainMenu.m:370
+#: modules/gui/macosx/TrackSynchronization.m:59
+msgid "Track Synchronization"
+msgstr "轨道同步"
+
+#: modules/gui/macosx/MainMenu.m:376
+msgid "A→B Loop"
+msgstr "A→B 循环"
+
+#: modules/gui/macosx/MainMenu.m:377 modules/gui/macosx/MainMenu.m:1520
+msgid "Quit after Playback"
+msgstr "播放后退出"
+
+#: modules/gui/macosx/MainMenu.m:378 modules/gui/macosx/MainMenu.m:1525
+msgid "Step Forward"
+msgstr "向前步进"
+
+#: modules/gui/macosx/MainMenu.m:379 modules/gui/macosx/MainMenu.m:1526
+msgid "Step Backward"
+msgstr "向后步进"
+
+#: modules/gui/macosx/MainMenu.m:389
+msgid "Increase Volume"
+msgstr "增大音量"
+
+#: modules/gui/macosx/MainMenu.m:390
+msgid "Decrease Volume"
+msgstr "减小音量"
+
+#: modules/gui/macosx/MainMenu.m:396 modules/gui/macosx/MainMenu.m:397
+msgid "Audio Device"
+msgstr "音频设备"
+
+#: modules/gui/macosx/MainMenu.m:402 modules/gui/macosx/MainMenu.m:1537
+msgid "Half Size"
+msgstr "一半尺寸"
+
+#: modules/gui/macosx/MainMenu.m:403 modules/gui/macosx/MainMenu.m:1538
+#: modules/gui/macosx/MainMenu.m:1577
+msgid "Normal Size"
+msgstr "普通尺寸"
+
+#: modules/gui/macosx/MainMenu.m:404 modules/gui/macosx/MainMenu.m:1539
+msgid "Double Size"
+msgstr "双倍尺寸"
+
+#: modules/gui/macosx/MainMenu.m:405 modules/gui/macosx/MainMenu.m:1540
+msgid "Fit to Screen"
+msgstr "适合屏幕"
+
+#: modules/gui/macosx/MainMenu.m:407 modules/gui/macosx/MainMenu.m:1543
+#: modules/gui/macosx/MainMenu.m:1549 modules/gui/macosx/simple_prefs.m:400
+msgid "Float on Top"
+msgstr "悬浮在顶部"
+
+#: modules/gui/macosx/MainMenu.m:415 modules/gui/macosx/MainMenu.m:416
+#: modules/gui/macosx/simple_prefs.m:395
+msgid "Fullscreen Video Device"
+msgstr "全屏幕视频设备"
+
+#: modules/gui/macosx/MainMenu.m:421 modules/gui/macosx/MainMenu.m:422
+#: modules/video_filter/postproc.c:200
+msgid "Post processing"
+msgstr "预处理"
+
+#: modules/gui/macosx/MainMenu.m:425 modules/gui/macosx/MainMenu.m:1562
+msgid "Add Subtitle File..."
+msgstr "添加字幕文件..."
+
+#: modules/gui/macosx/MainMenu.m:426 modules/gui/macosx/MainMenu.m:427
+msgid "Subtitles Track"
+msgstr "字幕轨道"
+
+#: modules/gui/macosx/MainMenu.m:428
+msgid "Text Size"
+msgstr "文字大小"
+
+#: modules/gui/macosx/MainMenu.m:429
+msgid "Text Color"
+msgstr "文字颜色"
+
+#: modules/gui/macosx/MainMenu.m:430
+msgid "Outline Thickness"
+msgstr "轮廓宽度"
+
+#: modules/gui/macosx/MainMenu.m:432 modules/gui/macosx/MainMenu.m:433
+msgid "Background Opacity"
+msgstr "背景不透明度"
+
+#: modules/gui/macosx/MainMenu.m:434
+msgid "Background Color"
+msgstr "背景颜色"
+
+#: modules/gui/macosx/MainMenu.m:436
+msgid "Transparent"
+msgstr "透明度"
+
+#: modules/gui/macosx/MainMenu.m:443
+msgid "Window"
+msgstr "窗口"
+
+#: modules/gui/macosx/MainMenu.m:444
+#, fuzzy
+msgid "Minimize"
+msgstr "最小化窗口"
+
+#: modules/gui/macosx/MainMenu.m:446
+msgid "Player..."
+msgstr "播放器..."
+
+#: modules/gui/macosx/MainMenu.m:447
+msgid "Main Window..."
+msgstr "主窗口..."
+
+#: modules/gui/macosx/MainMenu.m:448
+msgid "Audio Effects..."
+msgstr "音频特效..."
+
+#: modules/gui/macosx/MainMenu.m:449
+msgid "Video Effects..."
+msgstr "视频效果"
+
+#: modules/gui/macosx/MainMenu.m:450
+msgid "Bookmarks..."
+msgstr "书签..."
+
+#: modules/gui/macosx/MainMenu.m:451
+msgid "Playlist..."
+msgstr "播放列表..."
+
+#: modules/gui/macosx/MainMenu.m:452 modules/gui/macosx/playlist.m:586
+msgid "Media Information..."
+msgstr "媒体信息..."
+
+#: modules/gui/macosx/MainMenu.m:453
+msgid "Messages..."
+msgstr "消息..."
+
+#: modules/gui/macosx/MainMenu.m:454
+msgid "Errors and Warnings..."
+msgstr "错误和警告..."
+
+#: modules/gui/macosx/MainMenu.m:456
+msgid "Bring All to Front"
+msgstr "全部窗口到最前"
+
+#: modules/gui/macosx/MainMenu.m:458 modules/gui/qt4/dialogs/help.cpp:54
+#: modules/gui/qt4/menus.cpp:938
+msgid "Help"
+msgstr "帮助"
+
+#: modules/gui/macosx/MainMenu.m:459
+msgid "VLC media player Help..."
+msgstr "VLC media player 帮助..."
+
+#: modules/gui/macosx/MainMenu.m:460
+msgid "ReadMe / FAQ..."
+msgstr "读我 / 常见问题..."
+
+#: modules/gui/macosx/MainMenu.m:462
+msgid "Online Documentation..."
+msgstr "在线文档..."
+
+#: modules/gui/macosx/MainMenu.m:463
+msgid "VideoLAN Website..."
+msgstr "VideoLAN 网站..."
+
+#: modules/gui/macosx/MainMenu.m:464
+msgid "Make a donation..."
+msgstr "捐献..."
+
+#: modules/gui/macosx/MainMenu.m:465
+msgid "Online Forum..."
+msgstr "在线论坛..."
+
+#: modules/gui/macosx/MainWindow.m:174
+msgid ""
+"Enter a term to search the playlist. Results will be selected in the table."
+msgstr "请输入要在播放列表中搜索的关键词。结果将在表格中处于选中状态。"
+
+#: modules/gui/macosx/MainWindow.m:177
+msgid ""
+"Click to open an advanced dialog to select the media to play. You can also "
+"drop files here to play."
+msgstr ""
+"点击可打开高级对话框，用来选择要播放的媒体。您也可以将文件拖放到这里开始播"
+"放。"
+
+#: modules/gui/macosx/MainWindow.m:180 modules/gui/macosx/MainWindow.m:185
+#: modules/gui/qt4/components/playlist/selector.cpp:577
+msgid "Subscribe"
+msgstr "订阅"
+
+#: modules/gui/macosx/MainWindow.m:181 modules/gui/macosx/MainWindow.m:188
+#: modules/gui/qt4/components/playlist/selector.cpp:594
+msgid "Unsubscribe"
+msgstr "取消订阅"
+
+#: modules/gui/macosx/MainWindow.m:182
+#: modules/gui/qt4/components/playlist/selector.cpp:280
+msgid "Subscribe to a podcast"
+msgstr "订阅播客"
+
+#: modules/gui/macosx/MainWindow.m:183
+#: modules/gui/qt4/components/playlist/selector.cpp:578
+msgid "Enter URL of the podcast to subscribe to:"
+msgstr "输入要订阅的播客 URL:"
+
+#: modules/gui/macosx/MainWindow.m:186
+msgid "Unsubscribe from a podcast"
+msgstr "取消订阅播客"
+
+#: modules/gui/macosx/MainWindow.m:187
+msgid "Select the podcast you would like to unsubscribe from:"
+msgstr "请选择希望取消订阅的播客:"
+
+#: modules/gui/macosx/MainWindow.m:224
+msgid "LIBRARY"
+msgstr "媒体库"
+
+#: modules/gui/macosx/MainWindow.m:229
+msgid "MY COMPUTER"
+msgstr "我的电脑"
+
+#: modules/gui/macosx/MainWindow.m:230
+msgid "DEVICES"
+msgstr "设备"
+
+#: modules/gui/macosx/MainWindow.m:231
+msgid "LOCAL NETWORK"
+msgstr "本地网络"
+
+#: modules/gui/macosx/MainWindow.m:232
+msgid "INTERNET"
+msgstr "Internet"
+
+#: modules/gui/macosx/MainWindow.m:342
+msgid "Check for album art and metadata?"
+msgstr ""
+
+#: modules/gui/macosx/MainWindow.m:342
+#, fuzzy
+msgid "Enable Metadata Retrieval"
+msgstr "启用自适应预过滤"
+
+#: modules/gui/macosx/MainWindow.m:342
+#, fuzzy
+msgid "No, Thanks"
+msgstr "感谢"
+
+#: modules/gui/macosx/MainWindow.m:342
+msgid ""
+"VLC can check online for album art and metadata to enrich your playback "
+"experience, e.g. by providing track information when playing Audio CDs. To "
+"provide this functionality, VLC will send information about your contents to "
+"trusted services in an anonymized form."
+msgstr ""
+
+#: modules/gui/macosx/misc.m:980
+#, fuzzy
+msgid "B"
+msgstr "BD"
+
+#: modules/gui/macosx/misc.m:987
+msgid "KB"
+msgstr ""
+
+#: modules/gui/macosx/misc.m:994
+msgid "MB"
+msgstr ""
+
+#: modules/gui/macosx/misc.m:1002
+msgid "GB"
+msgstr ""
+
+#: modules/gui/macosx/misc.m:1007
+msgid "TB"
+msgstr ""
+
+#: modules/gui/macosx/open.m:57
+msgid "No device is selected"
+msgstr "未选择设备"
+
+#: modules/gui/macosx/open.m:58
+msgid ""
+"No device is selected.\n"
+"\n"
+"Choose available device in above pull-down menu.\n"
+msgstr ""
+"未选中设备。\n"
+"\n"
+"请在上面的下拉菜单中选择可用设备。\n"
+
+#: modules/gui/macosx/open.m:124
+msgid "Open Source"
+msgstr "打开源"
+
+#: modules/gui/macosx/open.m:125
+msgid "Media Resource Locator (MRL)"
+msgstr "媒体资源定位器 (MRL)"
+
+#: modules/gui/macosx/open.m:127 modules/gui/macosx/open.m:184
+#: modules/gui/macosx/open.m:665 modules/gui/macosx/open.m:740
+#: modules/gui/macosx/open.m:1118 modules/gui/macosx/open.m:1551
+#: modules/gui/qt4/components/controller.hpp:115
+msgid "Open"
+msgstr "打开"
+
+#: modules/gui/macosx/open.m:131
+msgid ""
+"4 Tabs to choose between media input. Select 'File' for files, 'Disc' for "
+"optical media such as DVDs, Audio CDs or BRs, 'Network' for network streams "
+"or 'Capture' for Input Devices such as microphones or cameras, the current "
+"screen or TV streams if the EyeTV application is installed."
+msgstr ""
+"4 个选项卡可选择不同的媒体输入来源。选择“文件”可打开文件，选择“光盘”可打开 "
+"DVD、音频 CD、蓝光碟等光学媒体，选择“网络”可打开网络上的流媒体，或选择“捕"
+"获”打开其他输入设备，如话筒、摄像头、当前屏幕或电视信号（需要安装 EyeTV 应用"
+"程序）。"
+
+#: modules/gui/macosx/open.m:133 modules/gui/macosx/open.m:591
+#: modules/gui/macosx/simple_prefs.m:340 modules/gui/qt4/ui/sprefs_input.h:360
+msgid "Network"
+msgstr "网络"
+
+#: modules/gui/macosx/open.m:134 modules/gui/macosx/open.m:488
+#: modules/gui/macosx/open.m:593
+msgid "Capture"
+msgstr "捕获"
+
+#: modules/gui/macosx/open.m:136 modules/gui/macosx/open.m:356
+msgid "Choose a file"
+msgstr "选择文件"
+
+#: modules/gui/macosx/open.m:139
+msgid "Click to select a file for playback"
+msgstr "点击可选择要回放的文件"
+
+#: modules/gui/macosx/open.m:140
+msgid "Treat as a pipe rather than as a file"
+msgstr "目标传输代替作为一个文件"
+
+#: modules/gui/macosx/open.m:142
+msgid "Play another media synchronously"
+msgstr "同时播放一个其它的媒体"
+
+#: modules/gui/macosx/open.m:143 modules/gui/macosx/open.m:359
+#: modules/gui/macosx/simple_prefs.m:380 modules/gui/macosx/wizard.m:343
+#: modules/gui/macosx/wizard.m:411 modules/gui/qt4/ui/sprefs_interface.h:522
+msgid "Choose..."
+msgstr "选择..."
+
+#: modules/gui/macosx/open.m:144
+msgid ""
+"Click to select a another file to play it in sync with the previously "
+"selected file."
+msgstr "点击可选择要与先前选择的文件同时播放的其他文件。"
+
+#: modules/gui/macosx/open.m:149
+msgid "Custom playback"
+msgstr "自定义回放"
+
+#: modules/gui/macosx/open.m:157
+#, fuzzy
+msgid "Open VIDEO_TS / BDMV folder"
+msgstr "打开 VIDEO_TS 文件夹"
+
+#: modules/gui/macosx/open.m:158
+msgid "Insert Disc"
+msgstr "插入光盘"
+
+#: modules/gui/macosx/open.m:164
+msgid "Disable DVD menus"
+msgstr "禁用 DVD 菜单"
+
+#: modules/gui/macosx/open.m:167
+msgid "Enable DVD menus"
+msgstr "启用 DVD 菜单"
+
+#: modules/gui/macosx/open.m:177
+msgid "IP Address"
+msgstr "IP 地址"
+
+#: modules/gui/macosx/open.m:180
+msgid ""
+"To Open a usual network stream (HTTP, RTSP, RTMP, MMS, FTP, etc.), just "
+"enter the URL in the field above. If you want to open a RTP or UDP stream, "
+"press the button below."
+msgstr ""
+"要打开一个常用的网络串流(HTTP, RTSP, RTMP, MMS, FTP 等等)，仅需在上面的框中输"
+"入 URL。如要打开一个 RTP 或 UDP 串流，请点击下面的按钮。"
+
+#: modules/gui/macosx/open.m:181
+msgid ""
+"If you want to open a multicast stream, enter the respective IP address "
+"given by the stream provider. In unicast mode, VLC will use your machine's "
+"IP automatically.\n"
+"\n"
+"To open a stream using a different protocol, just press Cancel to close this "
+"sheet."
+msgstr ""
+"如果您想打开一个多播串流，请输入串流供应者提供的 IP 地址。在单播模式，VLC 将"
+"自动使用本机的 IP 地址。\n"
+"\n"
+"要使用一个不同的协议打开串流，请点击取消。"
+
+#: modules/gui/macosx/open.m:182
+msgid ""
+"Enter a URL here to open the network stream. To open RTP or UDP streams, "
+"click on the respective button below."
+msgstr ""
+"请在此输入 URL，以打开网络流。要打开 RTP 或 UDP 流，请点击下面的对应按钮。"
+
+#: modules/gui/macosx/open.m:185
+msgid "Open RTP/UDP Stream"
+msgstr "打开 RTP/UDP 串流"
+
+#: modules/gui/macosx/open.m:187
+#: share/lua/http/dialogs/stream_config_window.html:24
+#: share/lua/http/dialogs/stream_window.html:83
+msgid "Protocol"
+msgstr "协议"
+
+#: modules/gui/macosx/open.m:190 modules/gui/macosx/open.m:1234
+#: modules/gui/macosx/open.m:1283
+msgid "Unicast"
+msgstr "单播"
+
+#: modules/gui/macosx/open.m:191 modules/gui/macosx/open.m:1247
+#: modules/gui/macosx/open.m:1296
+msgid "Multicast"
+msgstr "多播"
+
+#: modules/gui/macosx/open.m:199 modules/gui/macosx/open.m:507
+#: modules/gui/macosx/open.m:1401
+msgid "Input Devices"
+msgstr "输入设备"
+
+#: modules/gui/macosx/open.m:202
+msgid ""
+"This input allows you to save, stream or display your current screen "
+"contents."
+msgstr "此输入允许您保存、串流或显示您当前的屏幕内容。"
+
+#: modules/gui/macosx/open.m:205
+msgid "Subscreen left"
+msgstr "子屏幕最左位置"
+
+#: modules/gui/macosx/open.m:206
+msgid "Subscreen top"
+msgstr "子屏幕最上位置"
+
+#: modules/gui/macosx/open.m:210
+msgid "Capture Audio"
+msgstr "捕获音频"
+
+#: modules/gui/macosx/open.m:211
+msgid "Current channel:"
+msgstr "当前的频道:"
+
+#: modules/gui/macosx/open.m:212
+msgid "Previous Channel"
+msgstr "上一个频道"
+
+#: modules/gui/macosx/open.m:213
+msgid "Next Channel"
+msgstr "下一个频道"
+
+#: modules/gui/macosx/open.m:214 modules/gui/macosx/open.m:1482
+msgid "Retrieving Channel Info..."
+msgstr "正在检索频道信息..."
+
+#: modules/gui/macosx/open.m:215
+msgid "EyeTV is not launched"
+msgstr "EyeTV 未启动"
+
+#: modules/gui/macosx/open.m:216
+msgid ""
+"VLC could not connect to EyeTV.\n"
+"Make sure that you installed VLC's EyeTV plugin."
+msgstr ""
+"VLC 无法连接到 EyeTV。\n"
+"请确认您已经安装了 VLC 的 EyeTV 插件。"
+
+#: modules/gui/macosx/open.m:217
+msgid "Launch EyeTV now"
+msgstr "立即启动 EyeTV"
+
+#: modules/gui/macosx/open.m:218
+msgid "Download Plugin"
+msgstr "下载插件"
+
+#: modules/gui/macosx/open.m:219 modules/video_filter/scene.c:62
+#: modules/codec/svg.c:50
+msgid "Image width"
+msgstr "图像宽度"
+
+#: modules/gui/macosx/open.m:220 modules/video_filter/scene.c:67
+#: modules/codec/svg.c:52
+msgid "Image height"
+msgstr "图像高度"
+
+#: modules/gui/macosx/open.m:355
+msgid "Add Subtitle File:"
+msgstr "添加字幕文件:"
+
+#: modules/gui/macosx/open.m:360
+msgid "Click to setup subtitle playback in full detail."
+msgstr "点击可在完整的详细界面配置 回放。"
+
+#: modules/gui/macosx/open.m:362
+msgid "Click to select a subtitle file."
+msgstr "点击可选择一个字幕文件。"
+
+#: modules/gui/macosx/open.m:363
+msgid "Override parameters"
+msgstr "覆盖参数"
+
+#: modules/gui/macosx/open.m:366
+msgid "FPS"
+msgstr "FPS"
+
+#: modules/gui/macosx/open.m:368
+msgid "Subtitle encoding"
+msgstr "字幕编码"
+
+#: modules/gui/macosx/open.m:370 modules/gui/macosx/simple_prefs.m:382
+#: modules/gui/qt4/ui/sprefs_subtitles.h:301
+msgid "Font size"
+msgstr "字体"
+
+#: modules/gui/macosx/open.m:372
+msgid "Subtitle alignment"
+msgstr "字幕 "
+
+#: modules/gui/macosx/open.m:375
+msgid "Click to dismiss the subtitle setup dialog."
+msgstr "点击可跳过字幕配置对话框。"
+
+#: modules/gui/macosx/open.m:376
+msgid "Font Properties"
+msgstr "字体属性"
+
+#: modules/gui/macosx/open.m:377
+msgid "Subtitle File"
+msgstr "字幕文件"
+
+#: modules/gui/macosx/open.m:664 modules/gui/macosx/open.m:739
+#: modules/gui/macosx/open.m:1550 modules/gui/qt4/ui/open_file.h:143
+msgid "Open File"
+msgstr "打开文件"
+
+#: modules/gui/macosx/open.m:981
+#, c-format
+msgid "%i tracks"
+msgstr "%i 条轨道"
+
+#: modules/gui/macosx/open.m:1488
+msgid "Composite input"
+msgstr "混合输入"
+
+#: modules/gui/macosx/open.m:1491
+msgid "S-Video input"
+msgstr "S-Video 输入"
+
+#: modules/gui/macosx/output.m:127
+msgid "Streaming/Saving:"
+msgstr "流/保存:"
+
+#: modules/gui/macosx/output.m:128
+msgid "Settings..."
+msgstr "设置..."
+
+#: modules/gui/macosx/output.m:131
+msgid "Streaming and Transcoding Options"
+msgstr "流与编码转换选项"
+
+#: modules/gui/macosx/output.m:132
+msgid "Display the stream locally"
+msgstr "显示本地流"
+
+#: modules/gui/macosx/output.m:135 modules/gui/qt4/dialogs/convert.cpp:79
+msgid "Dump raw input"
+msgstr "转储 raw 输入"
+
+#: modules/gui/macosx/output.m:146
+msgid "Encapsulation Method"
+msgstr "封装模式"
+
+#: modules/gui/macosx/output.m:150
+msgid "Transcoding options"
+msgstr "转码选项"
+
+#: modules/gui/macosx/output.m:154 modules/gui/macosx/output.m:164
+#: modules/gui/macosx/wizard.m:381
+msgid "Bitrate (kb/s)"
+msgstr "位率 (kb/秒)"
+
+#: modules/gui/macosx/output.m:171
+msgid "Stream Announcing"
+msgstr "流式广播"
+
+#: modules/gui/macosx/output.m:177
+msgid "Channel Name"
+msgstr "频道名称"
+
+#: modules/gui/macosx/output.m:178
+msgid "SDP URL"
+msgstr "SDP URL"
+
+#: modules/gui/macosx/output.m:455
+#: modules/gui/qt4/components/preferences_widgets.cpp:302
+msgid "Save File"
+msgstr "保存文件"
+
+#: modules/gui/macosx/playlist.m:584
+msgid "Expand Node"
+msgstr "展开节点"
+
+#: modules/gui/macosx/playlist.m:587
+msgid "Download Cover Art"
+msgstr "下载封面"
+
+#: modules/gui/macosx/playlist.m:588
+msgid "Fetch Meta Data"
+msgstr "获取源数据"
+
+#: modules/gui/macosx/playlist.m:589 modules/gui/macosx/playlist.m:590
+msgid "Reveal in Finder"
+msgstr "在 Finder 中显示"
+
+#: modules/gui/macosx/playlist.m:592
+msgid "Sort Node by Name"
+msgstr "按名称排序节点"
+
+#: modules/gui/macosx/playlist.m:593
+msgid "Sort Node by Author"
+msgstr "按作者排序节点"
+
+#: modules/gui/macosx/playlist.m:595
+msgid "Search in Playlist"
+msgstr "在播放列表中搜索"
+
+#: modules/gui/macosx/playlist.m:776
+msgid "File Format:"
+msgstr "文件格式:"
+
+#: modules/gui/macosx/playlist.m:777
+msgid "Extended M3U"
+msgstr "扩展 M3U"
+
+#: modules/gui/macosx/playlist.m:778
+msgid "XML Shareable Playlist Format (XSPF)"
+msgstr "XML 可分享播放列表格式 (XSPF)"
+
+#: modules/gui/macosx/playlist.m:779 modules/gui/qt4/dialogs_provider.cpp:563
+msgid "HTML playlist"
+msgstr "HTML 播放列表"
+
+#: modules/gui/macosx/playlist.m:781
+msgid "Save Playlist"
+msgstr "保存播放列表"
+
+#: modules/gui/macosx/playlist.m:1202
+msgid "Meta-information"
+msgstr "源信息"
+
+#: modules/gui/macosx/playlist.m:1514 modules/gui/qt4/input_manager.cpp:135
+#, fuzzy
+msgid "Continue playback?"
+msgstr "回放时控制 iTunes 的播放状态"
+
+#: modules/gui/macosx/playlist.m:1514 modules/gui/macosx/simple_prefs.m:837
+#: modules/gui/qt4/dialogs/firstrun.cpp:109
+msgid "Continue"
+msgstr "继续"
+
+#: modules/gui/macosx/playlist.m:1514
+#, fuzzy
+msgid "Restart playback"
+msgstr "自定义回放"
+
+#: modules/gui/macosx/playlist.m:1514
+#, fuzzy
+msgid "Always continue"
+msgstr "总在最前"
+
+#: modules/gui/macosx/playlist.m:1514
+msgid "Playback of \"%@\" will continue at %@"
+msgstr ""
+
+#: modules/gui/macosx/playlistinfo.m:72
+#: modules/gui/qt4/dialogs/mediainfo.cpp:54
+msgid "Media Information"
+msgstr "媒体信息"
+
+#: modules/gui/macosx/playlistinfo.m:73
+msgid "Location"
+msgstr "位置"
+
+#: modules/gui/macosx/playlistinfo.m:76
+msgid "Save Metadata"
+msgstr "保存元数据"
+
+#: modules/gui/macosx/playlistinfo.m:78
+#: modules/visualization/visual/visual.c:122
+msgid "General"
+msgstr "常规"
+
+#: modules/gui/macosx/playlistinfo.m:79
+msgid "Codec Details"
+msgstr "编码详细信息"
+
+#: modules/gui/macosx/playlistinfo.m:97
+msgid "Read at media"
+msgstr "读取媒体"
+
+#: modules/gui/macosx/playlistinfo.m:98
+#: modules/gui/qt4/components/info_panels.cpp:571
+msgid "Input bitrate"
+msgstr "输入位率"
+
+#: modules/gui/macosx/playlistinfo.m:99
+msgid "Demuxed"
+msgstr "已去复用"
+
+#: modules/gui/macosx/playlistinfo.m:100
+msgid "Stream bitrate"
+msgstr "流位率"
+
+#: modules/gui/macosx/playlistinfo.m:103 modules/gui/macosx/playlistinfo.m:113
+msgid "Decoded blocks"
+msgstr "已解码的块"
+
+#: modules/gui/macosx/playlistinfo.m:104
+msgid "Displayed frames"
+msgstr "已显示的帧"
+
+#: modules/gui/macosx/playlistinfo.m:105
+msgid "Lost frames"
+msgstr "丢失的帧"
+
+#: modules/gui/macosx/playlistinfo.m:107 modules/gui/macosx/wizard.m:360
+#: modules/gui/qt4/dialogs_provider.cpp:688
+msgid "Streaming"
+msgstr "流"
+
+#: modules/gui/macosx/playlistinfo.m:108
+msgid "Sent packets"
+msgstr "发送数据包"
+
+#: modules/gui/macosx/playlistinfo.m:109
+msgid "Sent bytes"
+msgstr "发送字节"
+
+#: modules/gui/macosx/playlistinfo.m:110
+msgid "Send rate"
+msgstr "发送率"
+
+#: modules/gui/macosx/playlistinfo.m:114
+msgid "Played buffers"
+msgstr "已播放的缓冲"
+
+#: modules/gui/macosx/playlistinfo.m:115
+msgid "Lost buffers"
+msgstr "丢失的缓冲"
+
+#: modules/gui/macosx/playlistinfo.m:360
+msgid "Error while saving meta"
+msgstr "在保存元时发送错误"
+
+#: modules/gui/macosx/playlistinfo.m:361
+msgid "VLC was unable to save the meta data."
+msgstr "VLC 无法保存元数据。"
+
+#: modules/gui/macosx/prefs.m:206 modules/gui/macosx/simple_prefs.m:417
+#: modules/gui/qt4/dialogs/preferences.cpp:54
+msgid "Preferences"
+msgstr "参数设置"
+
+#: modules/gui/macosx/prefs.m:209 modules/gui/macosx/simple_prefs.m:415
+msgid "Reset All"
+msgstr "全部重置"
+
+#: modules/gui/macosx/prefs.m:210
+msgid "Show Basic"
+msgstr "显示基本"
+
+#: modules/gui/macosx/prefs_widgets.m:1156
+msgid "Select a directory"
+msgstr "选择一个目录"
+
+#: modules/gui/macosx/prefs_widgets.m:1156
+msgid "Select a file"
+msgstr "选择一个文件"
+
+#: modules/gui/macosx/prefs_widgets.m:1157
+msgid "Select"
+msgstr "选择"
+
+#: modules/gui/macosx/simple_prefs.m:269
+#: modules/gui/qt4/components/simple_preferences.cpp:270
+#: modules/gui/qt4/components/simple_preferences.cpp:713
+#: modules/gui/qt4/dialogs/plugins.cpp:372
+msgid "Interface Settings"
+msgstr "界面设置"
+
+#: modules/gui/macosx/simple_prefs.m:271
+#: modules/gui/qt4/components/simple_preferences.cpp:272
+#: modules/gui/qt4/components/simple_preferences.cpp:447
+msgid "Audio Settings"
+msgstr "音频设置"
+
+#: modules/gui/macosx/simple_prefs.m:273
+#: modules/gui/qt4/components/simple_preferences.cpp:274
+#: modules/gui/qt4/components/simple_preferences.cpp:401
+msgid "Video Settings"
+msgstr "视频设置"
+
+#: modules/gui/macosx/simple_prefs.m:275
+#: modules/gui/qt4/components/simple_preferences.cpp:276
+#: modules/gui/qt4/components/simple_preferences.cpp:852
+msgid "Subtitle & On Screen Display Settings"
+msgstr "字幕 & OSD 设置"
+
+#: modules/gui/macosx/simple_prefs.m:277
+msgid "Input & Codec Settings"
+msgstr "输入与编解码器设置"
+
+#: modules/gui/macosx/simple_prefs.m:311
+msgid "General Audio"
+msgstr "常规音频"
+
+#: modules/gui/macosx/simple_prefs.m:312
+msgid "Preferred Audio language"
+msgstr "首选的音频语言"
+
+#: modules/gui/macosx/simple_prefs.m:313
+msgid "Enable Last.fm submissions"
+msgstr "开启 Last.fm 提价"
+
+#: modules/gui/macosx/simple_prefs.m:317
+msgid "Visualization"
+msgstr "可视化"
+
+#: modules/gui/macosx/simple_prefs.m:318
+msgid "Keep audio level between sessions"
+msgstr "会话期间保留音频层级"
+
+#: modules/gui/macosx/simple_prefs.m:319 modules/gui/qt4/ui/sprefs_audio.h:430
+msgid "Always reset audio start level to:"
+msgstr "总将音频启动层级重置为:"
+
+#: modules/gui/macosx/simple_prefs.m:322 modules/gui/qt4/dialogs/vlm.cpp:506
+msgid "Change"
+msgstr "更改"
+
+#: modules/gui/macosx/simple_prefs.m:323
+msgid "Change Hotkey"
+msgstr "更改热键"
+
+#: modules/gui/macosx/simple_prefs.m:327
+msgid "Select an action to change the associated hotkey:"
+msgstr "选择一个要被更改的已分配热键:"
+
+#: modules/gui/macosx/simple_prefs.m:328
+#: modules/gui/qt4/components/preferences_widgets.cpp:1148
+msgid "Action"
+msgstr "操作"
+
+#: modules/gui/macosx/simple_prefs.m:329
+msgid "Shortcut"
+msgstr "快捷方式"
+
+#: modules/gui/macosx/simple_prefs.m:335
+msgid "Repair AVI Files"
+msgstr "修复 AVI 文件"
+
+#: modules/gui/macosx/simple_prefs.m:336
+msgid "Default Caching Level"
+msgstr "默认缓冲等级"
+
+#: modules/gui/macosx/simple_prefs.m:337 modules/gui/qt4/ui/open.h:249
+msgid "Caching"
+msgstr "正在缓冲"
+
+#: modules/gui/macosx/simple_prefs.m:338
+msgid ""
+"Use the complete preferences to configure custom caching values for each "
+"access module."
+msgstr "为每个访问模式使用完整的参数设置自定义的缓冲值。"
+
+#: modules/gui/macosx/simple_prefs.m:339
+msgid "Codecs / Muxers"
+msgstr "编解码器 / 多路复用器"
+
+#: modules/gui/macosx/simple_prefs.m:341
+msgid "Hardware Acceleration"
+msgstr "硬件加速"
+
+#: modules/gui/macosx/simple_prefs.m:342
+msgid "Post-Processing Quality"
+msgstr "预处理质量"
+
+#: modules/gui/macosx/simple_prefs.m:346
+msgid "Edit default application settings for network protocols"
+msgstr "编辑网络协议的默认应用程序设置"
+
+#: modules/gui/macosx/simple_prefs.m:349
+msgid "Open network streams using the following protocols"
+msgstr "打开采用下述协议的网络流"
+
+#: modules/gui/macosx/simple_prefs.m:350
+msgid "Note that these are system-wide settings."
+msgstr "注意这些设置会影响整个系统。"
+
+#: modules/gui/macosx/simple_prefs.m:356
+msgid "Interface style"
+msgstr "界面风格"
+
+#: modules/gui/macosx/simple_prefs.m:357
+msgid "Dark"
+msgstr "深色"
+
+#: modules/gui/macosx/simple_prefs.m:358
+msgid "Bright"
+msgstr "明亮"
+
+#: modules/gui/macosx/simple_prefs.m:359
+msgid "Show video within the main window"
+msgstr "在主窗口中显示视频"
+
+#: modules/gui/macosx/simple_prefs.m:361
+msgid "Show Fullscreen Controller"
+msgstr "显示全屏幕控制器"
+
+#: modules/gui/macosx/simple_prefs.m:362
+#: modules/gui/qt4/ui/sprefs_interface.h:529
+msgid "Privacy / Network Interaction"
+msgstr "隐私 / 网络交互"
+
+#: modules/gui/macosx/simple_prefs.m:367
+msgid "Automatically check for updates"
+msgstr "自动检测更新"
+
+#: modules/gui/macosx/simple_prefs.m:369
+msgid "Enable Growl notifications (on playlist item change)"
+msgstr "启用 Growl 通知（播放列表对象变更时）"
+
+#: modules/gui/macosx/simple_prefs.m:372 modules/lua/vlc.c:94
+#: modules/lua/vlc.c:101
+msgid "Lua HTTP"
+msgstr "Lua HTTP"
+
+#: modules/gui/macosx/simple_prefs.m:375
+#, fuzzy
+msgid "Continue playback"
+msgstr "自定义回放"
+
+#: modules/gui/macosx/simple_prefs.m:378
+msgid "Default Encoding"
+msgstr "默认编码"
+
+#: modules/gui/macosx/simple_prefs.m:379
+msgid "Display Settings"
+msgstr "显示设置"
+
+#: modules/gui/macosx/simple_prefs.m:381
+#: modules/gui/qt4/ui/sprefs_subtitles.h:302
+msgid "Font color"
+msgstr "字体颜色"
+
+#: modules/gui/macosx/simple_prefs.m:383 modules/text_renderer/freetype.c:95
+#: modules/text_renderer/quartztext.c:92 modules/text_renderer/win32text.c:59
+#: modules/video_filter/marq.c:156 modules/video_filter/rss.c:206
+#: modules/gui/qt4/ui/sprefs_subtitles.h:300
+msgid "Font"
+msgstr "字体"
+
+#: modules/gui/macosx/simple_prefs.m:384
+msgid "Subtitle languages"
+msgstr "字幕语言"
+
+#: modules/gui/macosx/simple_prefs.m:385
+#: modules/gui/qt4/ui/sprefs_subtitles.h:297
+msgid "Preferred subtitle language"
+msgstr "偏好字幕语言"
+
+#: modules/gui/macosx/simple_prefs.m:387
+msgid "Enable OSD"
+msgstr "开启 OSD"
+
+#: modules/gui/macosx/simple_prefs.m:388 modules/text_renderer/win32text.c:66
+#: modules/video_filter/marq.c:107 modules/video_filter/rss.c:146
+msgid "Opacity"
+msgstr "不透明度"
+
+#: modules/gui/macosx/simple_prefs.m:389 modules/text_renderer/freetype.c:119
+msgid "Force bold"
+msgstr "强制加粗"
+
+#: modules/gui/macosx/simple_prefs.m:390 modules/text_renderer/freetype.c:125
+#: modules/gui/qt4/ui/sprefs_subtitles.h:304
+msgid "Outline color"
+msgstr "轮廓颜色"
+
+#: modules/gui/macosx/simple_prefs.m:391 modules/text_renderer/freetype.c:126
+#: modules/gui/qt4/ui/sprefs_subtitles.h:303
+msgid "Outline thickness"
+msgstr "轮廓宽度"
+
+#: modules/gui/macosx/simple_prefs.m:394
+msgid "Black screens in Fullscreen mode"
+msgstr "全屏幕模式中的黑屏"
+
+#: modules/gui/macosx/simple_prefs.m:396 modules/stream_out/display.c:53
+#: modules/gui/qt4/ui/sprefs_video.h:323
+msgid "Display"
+msgstr "显示"
+
+#: modules/gui/macosx/simple_prefs.m:402 modules/gui/qt4/ui/sprefs_video.h:339
+msgid "Video snapshots"
+msgstr "显示截图"
+
+#: modules/gui/macosx/simple_prefs.m:404 modules/meta_engine/folder.c:63
+msgid "Folder"
+msgstr "文件夹"
+
+#: modules/gui/macosx/simple_prefs.m:405 modules/gui/qt4/ui/sprefs_video.h:345
+msgid "Format"
+msgstr "格式"
+
+#: modules/gui/macosx/simple_prefs.m:406 modules/gui/qt4/ui/sprefs_video.h:342
+msgid "Prefix"
+msgstr "前缀"
+
+#: modules/gui/macosx/simple_prefs.m:407 modules/gui/qt4/ui/sprefs_video.h:344
+msgid "Sequential numbering"
+msgstr "顺序编码"
+
+#: modules/gui/macosx/simple_prefs.m:581
+msgid "Last check on: %@"
+msgstr "上次检查于: %@"
+
+#: modules/gui/macosx/simple_prefs.m:583
+msgid "No check was performed yet."
+msgstr "尚未执行检查。"
+
+#: modules/gui/macosx/simple_prefs.m:704
+#: modules/gui/qt4/components/simple_preferences.cpp:687
+msgid "Lowest latency"
+msgstr "最低潜伏时间"
+
+#: modules/gui/macosx/simple_prefs.m:705
+#: modules/gui/qt4/components/simple_preferences.cpp:688
+msgid "Low latency"
+msgstr "低潜伏"
+
+#: modules/gui/macosx/simple_prefs.m:705
+#: modules/gui/qt4/components/simple_preferences.cpp:690
+msgid "High latency"
+msgstr "高潜伏时间"
+
+#: modules/gui/macosx/simple_prefs.m:705
+#: modules/gui/qt4/components/simple_preferences.cpp:691
+msgid "Higher latency"
+msgstr "较高潜伏时间"
+
+#: modules/gui/macosx/simple_prefs.m:836
+#: modules/gui/qt4/dialogs/preferences.cpp:327
+msgid "Reset Preferences"
+msgstr "重置首选项"
+
+#: modules/gui/macosx/simple_prefs.m:839
+msgid ""
+"This will reset VLC media player's preferences.\n"
+"\n"
+"Note that VLC will restart during the process, so your current playlist will "
+"be emptied and eventual playback, streaming or transcoding activities will "
+"stop immediately.\n"
+"\n"
+"The Media Library will not be affected.\n"
+"\n"
+"Are you sure you want to continue?"
+msgstr ""
+"这将重置 VLC media player 的偏好设置。\n"
+"\n"
+"注意 VLC 将在该过程中重新启动，因此您当前的播放列表将被清空，最终所有回放、串"
+"流及转码操作都将立刻停止。\n"
+"\n"
+"“媒体库”不会受到影响。\n"
+"\n"
+"是否确定要继续?"
+
+#: modules/gui/macosx/simple_prefs.m:1135
+msgid ""
+"This setting cannot be changed because the native fullscreen mode is enabled."
+msgstr ""
+
+#: modules/gui/macosx/simple_prefs.m:1197
+msgid "Choose the folder to save your video snapshots to."
+msgstr "选择您的视频截图要保存的文件夹。"
+
+#: modules/gui/macosx/simple_prefs.m:1199
+#: modules/gui/macosx/simple_prefs.m:1296
+msgid "Choose"
+msgstr "选择"
+
+#: modules/gui/macosx/simple_prefs.m:1294
+msgid "Choose the directory or filename where the records will be stored."
+msgstr "选择存储录制内容的目录或文件名。"
+
+#: modules/gui/macosx/simple_prefs.m:1413
+msgid ""
+"Press new keys for\n"
+"\"%@\""
+msgstr ""
+"请为下述功能按新键\n"
+"\"%@\""
+
+#: modules/gui/macosx/simple_prefs.m:1490
+msgid "Invalid combination"
+msgstr "无效的组合"
+
+#: modules/gui/macosx/simple_prefs.m:1491
+msgid "Regrettably, these keys cannot be assigned as hotkey shortcuts."
+msgstr "很遗憾，这些按键无法被分配为热键快捷方式。"
+
+#: modules/gui/macosx/simple_prefs.m:1501
+#: modules/gui/macosx/simple_prefs.m:1505
+msgid "This combination is already taken by \"%@\"."
+msgstr "此组合已经被 \"%@\" 使用。"
+
+#: modules/gui/macosx/StringUtility.m:255
+msgid "Not Set"
+msgstr "未设置"
+
+#: modules/gui/macosx/TrackSynchronization.m:61
+#: modules/gui/qt4/components/extended_panels.cpp:1457
+msgid "Audio/Video"
+msgstr "音频/视频"
+
+#: modules/gui/macosx/TrackSynchronization.m:62
+#: modules/gui/qt4/components/extended_panels.cpp:1461
+msgid "Audio track synchronization:"
+msgstr "音频轨道同步:"
+
+#: modules/gui/macosx/TrackSynchronization.m:63
+#: modules/gui/macosx/TrackSynchronization.m:67
+msgid "s"
+msgstr "秒"
+
+#: modules/gui/macosx/TrackSynchronization.m:64
+msgid "A positive value means that the audio is ahead of the video"
+msgstr "正值说明音频在视频之前"
+
+#: modules/gui/macosx/TrackSynchronization.m:65
+#: modules/gui/qt4/components/extended_panels.cpp:1469
+msgid "Subtitles/Video"
+msgstr "字幕/视频"
+
+#: modules/gui/macosx/TrackSynchronization.m:66
+#: modules/gui/qt4/components/extended_panels.cpp:1473
+msgid "Subtitle track synchronization:"
+msgstr "字幕轨道同步:"
+
+#: modules/gui/macosx/TrackSynchronization.m:68
+msgid "A positive value means that the subtitles are ahead of the video"
+msgstr "正值说明字幕在视频之前"
+
+#: modules/gui/macosx/TrackSynchronization.m:69
+#: modules/gui/qt4/components/extended_panels.cpp:1480
+msgid "Subtitle speed:"
+msgstr "字幕速度:"
+
+#: modules/gui/macosx/TrackSynchronization.m:70
+msgid "fps"
+msgstr "fps"
+
+#: modules/gui/macosx/TrackSynchronization.m:71
+#: modules/gui/qt4/components/extended_panels.cpp:1494
+msgid "Subtitle duration factor:"
+msgstr "字幕时长因素:"
+
+#: modules/gui/macosx/TrackSynchronization.m:79
+#: modules/gui/qt4/components/extended_panels.cpp:1605
+msgid ""
+"Extend subtitle duration by this value.\n"
+"Set 0 to disable."
+msgstr ""
+"以该数值延长字幕时长。\n"
+"设为 0 可禁用。"
+
+#: modules/gui/macosx/TrackSynchronization.m:83
+#: modules/gui/qt4/components/extended_panels.cpp:1610
+msgid ""
+"Multiply subtitle duration by this value.\n"
+"Set 0 to disable."
+msgstr ""
+"以该数值加倍字幕时长。\n"
+"设为 0 可禁用。"
+
+#: modules/gui/macosx/TrackSynchronization.m:87
+#: modules/gui/qt4/components/extended_panels.cpp:1615
+msgid ""
+"Recalculate subtitle duration according\n"
+"to their content and this value.\n"
+"Set 0 to disable."
+msgstr ""
+"根据内容及该值重新计算字幕时长。\n"
+"设为 0 可禁用。"
+
+#: modules/gui/macosx/VideoEffects.m:76
+#: modules/gui/qt4/dialogs/extended.cpp:84
+msgid "Video Effects"
+msgstr "视频效果"
+
+#: modules/gui/macosx/VideoEffects.m:81
+msgid "Basic"
+msgstr "基础"
+
+#: modules/gui/macosx/VideoEffects.m:83
+#: modules/gui/qt4/ui/video_effects.h:1445
+msgid "Geometry"
+msgstr "几何"
+
+#: modules/gui/macosx/VideoEffects.m:84 modules/gui/macosx/VideoEffects.m:133
+#: modules/gui/macosx/VideoEffects.m:148 modules/gui/macosx/VideoEffects.m:151
+#: modules/video_filter/colorthres.c:54 modules/video_filter/marq.c:114
+#: modules/video_filter/rss.c:154 modules/gui/qt4/ui/video_effects.h:1418
+#: modules/gui/qt4/ui/video_effects.h:1424
+#: modules/gui/qt4/ui/video_effects.h:1427
+msgid "Color"
+msgstr "颜色"
+
+#: modules/gui/macosx/VideoEffects.m:89
+msgid "Image Adjust"
+msgstr "图像调整"
+
+#: modules/gui/macosx/VideoEffects.m:93
+#: modules/gui/qt4/ui/video_effects.h:1395
+msgid "Brightness Threshold"
+msgstr "亮度阈值"
+
+#: modules/gui/macosx/VideoEffects.m:97 modules/video_filter/sharpen.c:67
+#: modules/gui/qt4/ui/video_effects.h:1399
+msgid "Sharpen"
+msgstr "锐利"
+
+#: modules/gui/macosx/VideoEffects.m:98
+#: modules/gui/qt4/ui/video_effects.h:1400
+#: modules/gui/qt4/ui/video_effects.h:1484
+msgid "Sigma"
+msgstr "Sigma"
+
+#: modules/gui/macosx/VideoEffects.m:99
+#: modules/gui/qt4/ui/video_effects.h:1401
+msgid "Banding removal"
+msgstr "Banding 移除"
+
+#: modules/gui/macosx/VideoEffects.m:100 modules/video_filter/gradfun.c:49
+#: modules/gui/qt4/ui/video_effects.h:1402
+msgid "Radius"
+msgstr "半径"
+
+#: modules/gui/macosx/VideoEffects.m:101
+#: modules/gui/qt4/ui/video_effects.h:1403
+msgid "Film Grain"
+msgstr "胶片颗粒"
+
+#: modules/gui/macosx/VideoEffects.m:102 modules/video_filter/grain.c:53
+#: modules/gui/qt4/ui/video_effects.h:1404
+msgid "Variance"
+msgstr "差量"
+
+#: modules/gui/macosx/VideoEffects.m:107
+#: modules/gui/qt4/ui/video_effects.h:1412
+msgid "Synchronize top and bottom"
+msgstr "上下校准"
+
+#: modules/gui/macosx/VideoEffects.m:108
+#: modules/gui/qt4/ui/video_effects.h:1413
+msgid "Synchronize left and right"
+msgstr "左右校准"
+
+#: modules/gui/macosx/VideoEffects.m:110
+#: modules/gui/qt4/ui/video_effects.h:1438
+msgid "Transform"
+msgstr "传输"
+
+#: modules/gui/macosx/VideoEffects.m:112 modules/video_filter/transform.c:50
+msgid "Rotate by 90 degrees"
+msgstr "旋转 90 度"
+
+#: modules/gui/macosx/VideoEffects.m:114 modules/video_filter/transform.c:51
+msgid "Rotate by 180 degrees"
+msgstr "旋转 180 度"
+
+#: modules/gui/macosx/VideoEffects.m:116 modules/video_filter/transform.c:51
+msgid "Rotate by 270 degrees"
+msgstr "旋转 270 度"
+
+#: modules/gui/macosx/VideoEffects.m:118 modules/video_filter/transform.c:52
+msgid "Flip horizontally"
+msgstr "水平翻转"
+
+#: modules/gui/macosx/VideoEffects.m:120 modules/video_filter/transform.c:52
+msgid "Flip vertically"
+msgstr "垂直倒转"
+
+#: modules/gui/macosx/VideoEffects.m:122
+msgid "Magnification/Zoom"
+msgstr "放大/扩大"
+
+#: modules/gui/macosx/VideoEffects.m:123
+#: modules/gui/qt4/ui/video_effects.h:1441
+msgid "Puzzle game"
+msgstr "智力游戏"
+
+#: modules/gui/macosx/VideoEffects.m:124 modules/gui/macosx/VideoEffects.m:129
+#: share/lua/http/dialogs/mosaic_window.html:96
+#: modules/gui/qt4/ui/video_effects.h:1436
+#: modules/gui/qt4/ui/video_effects.h:1442
+msgid "Rows"
+msgstr "行"
+
+#: modules/gui/macosx/VideoEffects.m:125 modules/gui/macosx/VideoEffects.m:130
+#: share/lua/http/dialogs/mosaic_window.html:114
+#: modules/gui/qt4/ui/video_effects.h:1437
+#: modules/gui/qt4/ui/video_effects.h:1443
+msgid "Columns"
+msgstr "列"
+
+#: modules/gui/macosx/VideoEffects.m:126 modules/video_splitter/clone.c:57
+#: modules/gui/qt4/ui/video_effects.h:1494
+msgid "Clone"
+msgstr "克隆"
+
+#: modules/gui/macosx/VideoEffects.m:127 modules/video_splitter/clone.c:39
+#: modules/gui/qt4/ui/video_effects.h:1495
+msgid "Number of clones"
+msgstr "克隆数量"
+
+#: modules/gui/macosx/VideoEffects.m:128
+#: modules/gui/qt4/ui/video_effects.h:1435
+msgid "Wall"
+msgstr "墙"
+
+#: modules/gui/macosx/VideoEffects.m:132 modules/video_filter/colorthres.c:70
+#: modules/gui/qt4/ui/video_effects.h:1426
+msgid "Color threshold"
+msgstr "色彩阈值"
+
+#: modules/gui/macosx/VideoEffects.m:135
+#: modules/gui/qt4/ui/video_effects.h:1430
+msgid "Similarity"
+msgstr "相似"
+
+#: modules/gui/macosx/VideoEffects.m:137
+#: modules/gui/qt4/ui/video_effects.h:1432
+msgid "Intensity"
+msgstr "强度"
+
+#: modules/gui/macosx/VideoEffects.m:139 modules/gui/macosx/VideoEffects.m:142
+#: modules/video_filter/gradient.c:76 modules/video_filter/gradient.c:82
+#: modules/gui/qt4/ui/video_effects.h:1422
+msgid "Gradient"
+msgstr "斜度"
+
+#: modules/gui/macosx/VideoEffects.m:144 modules/video_filter/gradient.c:76
+msgid "Edge"
+msgstr "边缘"
+
+#: modules/gui/macosx/VideoEffects.m:146 modules/video_filter/gradient.c:76
+msgid "Hough"
+msgstr "破碎"
+
+#: modules/gui/macosx/VideoEffects.m:149
+#: modules/gui/qt4/ui/video_effects.h:1425
+msgid "Cartoon"
+msgstr "卡通"
+
+#: modules/gui/macosx/VideoEffects.m:150
+#: modules/gui/qt4/ui/video_effects.h:1417
+msgid "Color extraction"
+msgstr "色彩提取"
+
+#: modules/gui/macosx/VideoEffects.m:152
+msgid "Invert colors"
+msgstr "反转色彩"
+
+#: modules/gui/macosx/VideoEffects.m:153 modules/video_filter/posterize.c:68
+#: modules/gui/qt4/ui/video_effects.h:1421
+msgid "Posterize"
+msgstr "色调分离"
+
+#: modules/gui/macosx/VideoEffects.m:154 modules/video_filter/posterize.c:60
+msgid "Posterize level"
+msgstr "色调分离层级"
+
+#: modules/gui/macosx/VideoEffects.m:155 modules/video_filter/motionblur.c:59
+#: modules/gui/qt4/ui/video_effects.h:1485
+msgid "Motion blur"
+msgstr "动态模糊"
+
+#: modules/gui/macosx/VideoEffects.m:156
+#: modules/gui/qt4/ui/video_effects.h:1486
+msgid "Factor"
+msgstr "因素"
+
+#: modules/gui/macosx/VideoEffects.m:157
+#: modules/video_filter/motiondetect.c:49
+msgid "Motion Detect"
+msgstr "动态检测"
+
+#: modules/gui/macosx/VideoEffects.m:158
+#: modules/gui/qt4/ui/video_effects.h:1481
+msgid "Water effect"
+msgstr "水面效果"
+
+#: modules/gui/macosx/VideoEffects.m:161 modules/video_filter/anaglyph.c:73
+msgid "Anaglyph"
+msgstr "立体"
+
+#: modules/gui/macosx/VideoEffects.m:163
+#: modules/gui/qt4/ui/video_effects.h:1456
+msgid "Add text"
+msgstr "添加文本"
+
+#: modules/gui/macosx/VideoEffects.m:164 modules/misc/logger.c:109
+#: modules/video_filter/marq.c:87 modules/gui/qt4/ui/video_effects.h:1458
+msgid "Text"
+msgstr "文本"
+
+#: modules/gui/macosx/VideoEffects.m:185
+#: modules/gui/qt4/ui/video_effects.h:1446
+msgid "Add logo"
+msgstr "添加标志"
+
+#: modules/gui/macosx/VideoEffects.m:186
+#: modules/gui/qt4/ui/video_effects.h:1447
+msgid "Logo"
+msgstr "标志"
+
+#: modules/gui/macosx/VideoEffects.m:207
+#: modules/stream_out/mosaic_bridge.c:128 modules/video_filter/mosaic.c:87
+#: modules/gui/qt4/ui/video_effects.h:1454
+msgid "Transparency"
+msgstr "透明"
+
+#: modules/gui/macosx/VideoEffects.m:236
+msgid "Organize profiles..."
+msgstr "管理配置文件"
+
+#: modules/gui/macosx/wizard.m:116
+msgid "MPEG-1 Video codec (usable with MPEG PS, MPEG TS, MPEG1, OGG and RAW)"
+msgstr "MPEG-1 视频编解码器 (用于 MPEG PS, MPEG TS, MPEG1, OGG 和 RAW)"
+
+#: modules/gui/macosx/wizard.m:120
+msgid "MPEG-2 Video codec (usable with MPEG PS, MPEG TS, MPEG1, OGG and RAW)"
+msgstr "MPEG-2 视频编解码器 (用于 MPEG PS, MPEG TS, MPEG1, OGG 和 RAW)"
+
+#: modules/gui/macosx/wizard.m:124
+msgid ""
+"MPEG-4 Video codec (useable with MPEG PS, MPEG TS, MPEG1, ASF, MP4, OGG and "
+"RAW)"
+msgstr ""
+"MPEG-4 视频编解码器 (用于 MPEG PS, MPEG TS, MPEG1, ASF, MP4, OGG 和 RAW)"
+
+#: modules/gui/macosx/wizard.m:128
+msgid "DivX first version (useable with MPEG TS, MPEG1, ASF and OGG)"
+msgstr "DivX 第一版 (用于 MPEG TS, MPEG1, ASF 和 OGG)"
+
+#: modules/gui/macosx/wizard.m:132
+msgid "DivX second version (useable with MPEG TS, MPEG1, ASF and OGG)"
+msgstr "DivX 第二版 (用于 MPEG TS, MPEG1, ASF 和 OGG)"
+
+#: modules/gui/macosx/wizard.m:136
+msgid "DivX third version (useable with MPEG TS, MPEG1, ASF and OGG)"
+msgstr "DivX 第三版 (用于 MPEG TS, MPEG1, ASF 和 OGG)"
+
+#: modules/gui/macosx/wizard.m:140
+msgid ""
+"H263 is a video codec optimized for videoconference (low rates, useable with "
+"MPEG TS)"
+msgstr "H263 是一个为视频会议优化的编解码器 (低位率, 用于 MPEG TS)"
+
+#: modules/gui/macosx/wizard.m:144
+msgid "H264 is a new video codec (useable with MPEG TS and MP4)"
+msgstr "H264 是一个新的视频编解码器 (用于 MPEG TS 和 MP4)"
+
+#: modules/gui/macosx/wizard.m:148
+msgid "WMV (Windows Media Video) 1 (useable with MPEG TS, MPEG1, ASF and OGG)"
+msgstr "WMV (Windows Media 视频) 1 (用于 MPEG TS, MPEG1, ASF 和 OGG)"
+
+#: modules/gui/macosx/wizard.m:152
+msgid "WMV (Windows Media Video) 2 (useable with MPEG TS, MPEG1, ASF and OGG)"
+msgstr "WMV (Windows Media 视频) 2 (用于 MPEG TS, MPEG1, ASF 和 OGG)"
+
+#: modules/gui/macosx/wizard.m:156
+msgid ""
+"MJPEG consists of a series of JPEG pictures (useable with MPEG TS, MPEG1, "
+"ASF and OGG)"
+msgstr "由一系列 JPEG 图像组成的 MJPEG (用于 MPEG TS, MPEG1, ASF 和 OGG)"
+
+#: modules/gui/macosx/wizard.m:160
+msgid "Theora is a free general-purpose codec (useable with MPEG TS and OGG)"
+msgstr "Theora 是一个自由的多用途编解码器 (用于 MPEG TS 和 OGG)"
+
+#: modules/gui/macosx/wizard.m:164 modules/gui/macosx/wizard.m:214
+msgid "Dummy codec (do not transcode, useable with all encapsulation formats)"
+msgstr "空编解码 (不转码, 可用于所有封装格式)"
+
+#: modules/gui/macosx/wizard.m:183
+msgid ""
+"The standard MPEG audio (1/2) format (useable with MPEG PS, MPEG TS, MPEG1, "
+"ASF, OGG and RAW)"
+msgstr ""
+"标准 MPEG 音频 (1/2) 格式 (用于 MPEG PS, MPEG TS, MPEG1, ASF, OGG 和 RAW)"
+
+#: modules/gui/macosx/wizard.m:187
+msgid ""
+"MPEG Audio Layer 3 (useable with MPEG PS, MPEG TS, MPEG1, ASF, OGG and RAW)"
+msgstr "MPEG 音频层次 3 (用于 MPEG PS, MPEG TS, MPEG1, ASF, OGG 和 RAW)"
+
+#: modules/gui/macosx/wizard.m:191
+msgid "Audio format for MPEG4 (useable with MPEG TS and MPEG4)"
+msgstr "MPEG4 音频格式 (用于 MPEG TS 和 MPEG4)"
+
+#: modules/gui/macosx/wizard.m:194
+msgid ""
+"DVD audio format (useable with MPEG PS, MPEG TS, MPEG1, ASF, OGG and RAW)"
+msgstr "DVD 音频格式 (用于 MPEG PS, MPEG TS, MPEG1, ASF, OGG 和 RAW)"
+
+#: modules/gui/macosx/wizard.m:198
+msgid "Vorbis is a free audio codec (useable with OGG)"
+msgstr "Vorbis 是一个自由的音频编解码器 (用于 OGG)"
+
+#: modules/gui/macosx/wizard.m:201
+msgid "FLAC is a lossless audio codec (useable with OGG and RAW)"
+msgstr "FLAC 是一个无损音频编解码器 (用于 OGG 和 RAW)"
+
+#: modules/gui/macosx/wizard.m:204
+msgid "A free audio codec dedicated to compression of voice (useable with OGG)"
+msgstr "一个用于压缩语音的免费音频编解码器 (用于 OGG)"
+
+#: modules/gui/macosx/wizard.m:208 modules/gui/macosx/wizard.m:211
+msgid "Uncompressed audio samples (useable with WAV)"
+msgstr "未压缩音频采样 (用于 WAV)"
+
+#: modules/gui/macosx/wizard.m:234
+msgid "MPEG Program Stream"
+msgstr "MPEG 程序流"
+
+#: modules/gui/macosx/wizard.m:235
+msgid "MPEG Transport Stream"
+msgstr "MPEG 传输流"
+
+#: modules/gui/macosx/wizard.m:236
+msgid "MPEG 1 Format"
+msgstr "MPEG 1 格式"
+
+#: modules/gui/macosx/wizard.m:254
+msgid ""
+"Enter the local addresses you want to listen requests on. Do not enter "
+"anything if you want to listen on all the network interfaces. This is "
+"generally the best thing to do. Other computers can then access the stream "
+"at http://yourip:8080 by default."
+msgstr ""
+"请输入您要请求打开监听的本地地址。如果您希望监听整个网络界面请不要输入任何东"
+"西。这通常是最佳的做法。其它计算机在默认情况下可以通过 http://您的 ip:8080 访"
+"问流。"
+
+#: modules/gui/macosx/wizard.m:258
+msgid ""
+"Use this to stream to several computers. This method is not the most "
+"efficient, as the server needs to send the stream several times, but "
+"generally the most compatible"
+msgstr ""
+"使用此将流传送至多台计算机。此模式不是最有效的，作为服务器需要许多时间才能发"
+"送流，但是它却有最佳的兼容性"
+
+#: modules/gui/macosx/wizard.m:261
+msgid ""
+"Enter the local addresses you want to listen requests on. Do not enter "
+"anything if you want to listen on all the network interfaces. This is "
+"generally the best thing to do. Other computers can then access the stream "
+"at mms://yourip:8080 by default."
+msgstr ""
+"请输入您要请求打开监听的本地地址。如果您希望监听整个网络界面请不要输入任何东"
+"西。这通常是最佳的做法。其它计算机在默认情况下可以通过 mms://您的 ip:8080 访"
+"问流。"
+
+#: modules/gui/macosx/wizard.m:265
+msgid ""
+"Use this to stream to several computers using the Microsoft MMS protocol. "
+"This protocol is used as transport method by many Microsoft's software. Note "
+"that only a small part of the MMS protocol is supported (MMS encapsulated in "
+"HTTP)."
+msgstr ""
+"使用本功能可通过 Microsoft MMS 协议串流至多台计算机。许多 Microsoft 软件采用"
+"该协议作为传输方式。注意只支持 MMS 协议的一小部分 (HTTP 内封装的 MMS)。"
+
+#: modules/gui/macosx/wizard.m:270 modules/gui/macosx/wizard.m:280
+msgid "Enter the address of the computer to stream to."
+msgstr "请输入计算机要发布流的地址。"
+
+#: modules/gui/macosx/wizard.m:271 modules/gui/macosx/wizard.m:369
+msgid "Use this to stream to a single computer."
+msgstr "使用此选项将流发布到单一的计算机上。"
+
+#: modules/gui/macosx/wizard.m:273 modules/gui/macosx/wizard.m:283
+msgid ""
+"Enter the multicast address to stream to in this field. This must be an IP "
+"address between 224.0.0.0 and 239.255.255.255. For a private use, enter an "
+"address beginning with 239.255."
+msgstr ""
+"请在此区域输入要将流发送的多播地址。这必须是一个在 224.0.0.0 到 "
+"239.255.255.255 之间的 IP 地址。要用于私人用途请输入一个从 239.225. 开始的地"
+"址。"
+
+#: modules/gui/macosx/wizard.m:276
+msgid ""
+"Use this to stream to a dynamic group of computers on a multicast-enabled "
+"network. This is the most efficient method to stream to several computers, "
+"but it won't work over the Internet."
+msgstr ""
+"使用此选项将流发送至在开启多播网络上的动态组计算机。这是一种最有效的将流发送"
+"到多台计算机的模式，但是它不能通过 Internet 工作。"
+
+#: modules/gui/macosx/wizard.m:281
+msgid ""
+"Use this to stream to a single computer. RTP headers will be added to the "
+"stream"
+msgstr "使用此流发送到一个单一的计算机。RTP 头部将被加到流中"
+
+#: modules/gui/macosx/wizard.m:286
+msgid ""
+"Use this to stream to a dynamic group of computers on a multicast-enabled "
+"network. This is the most efficient method to stream to several computers, "
+"but it won't work over Internet. RTP headers will be added to the stream"
+msgstr ""
+"使用此选项将流发送至在开启多播网络上的动态组计算机。这是一种最有效的将流发送"
+"到多台计算机的模式，但是它不能通过 Internet 工作。RTP 头部将被加到流中"
+
+#: modules/gui/macosx/wizard.m:316
+msgid "Back"
+msgstr "返回"
+
+#: modules/gui/macosx/wizard.m:319 modules/gui/macosx/wizard.m:322
+#: modules/gui/macosx/wizard.m:1195
+msgid "Streaming/Transcoding Wizard"
+msgstr "流/转码向导"
+
+#: modules/gui/macosx/wizard.m:323
+msgid "This wizard allows configuring simple streaming or transcoding setups."
+msgstr "此向导允许配置简单的串流或转码设置。"
+
+#: modules/gui/macosx/wizard.m:325 modules/gui/macosx/wizard.m:326
+#: modules/gui/macosx/wizard.m:399 modules/gui/macosx/wizard.m:401
+#: modules/gui/macosx/wizard.m:403 modules/gui/macosx/wizard.m:418
+msgid "More Info"
+msgstr "更多信息"
+
+#: modules/gui/macosx/wizard.m:327
+msgid ""
+"This wizard only gives access to a small subset of VLC's streaming and "
+"transcoding capabilities. The Open and 'Saving/Streaming' dialogs will give "
+"access to more features."
+msgstr ""
+"此向导仅提供访问了 VLC 流和转码功能中的很小一部分。打开 '保存/流' 对话框将能"
+"访问到更多的功能。"
+
+#: modules/gui/macosx/wizard.m:332 modules/gui/macosx/wizard.m:491
+#: modules/gui/macosx/wizard.m:1607
+msgid "Stream to network"
+msgstr "将流发布到网络中"
+
+#: modules/gui/macosx/wizard.m:334 modules/gui/macosx/wizard.m:1615
+msgid "Transcode/Save to file"
+msgstr "转码/保存到文件"
+
+#: modules/gui/macosx/wizard.m:337
+msgid "Choose input"
+msgstr "选择输入"
+
+#: modules/gui/macosx/wizard.m:338
+msgid "Choose here your input stream."
+msgstr "在这里选择您的输入流。"
+
+#: modules/gui/macosx/wizard.m:340 modules/gui/macosx/wizard.m:529
+#: modules/gui/macosx/wizard.m:1640
+msgid "Select a stream"
+msgstr "选择一个流"
+
+#: modules/gui/macosx/wizard.m:342
+msgid "Existing playlist item"
+msgstr "已存在的播放列表项目"
+
+#: modules/gui/macosx/wizard.m:350 modules/gui/macosx/wizard.m:430
+msgid "Partial Extract"
+msgstr "部分释放"
+
+#: modules/gui/macosx/wizard.m:352
+msgid ""
+"This can be used to read only a part of the stream. It must be possible to "
+"control the incoming stream (for example, a file or a disc, but not an UDP "
+"network stream.) The starting and ending times can be given in seconds."
+msgstr ""
+"这仅能被用作读取一部分的流。它必须可能控制入站流 (例如，一个文件或一张光盘，"
+"但是不能是一个 UDP 网络流。) 必须以秒为单位给出开始和结束的时间。"
+
+#: modules/gui/macosx/wizard.m:356
+msgid "From"
+msgstr "从"
+
+#: modules/gui/macosx/wizard.m:357
+msgid "To"
+msgstr "到"
+
+#: modules/gui/macosx/wizard.m:361
+msgid "This page allows selecting how the input stream will be sent."
+msgstr "此页可选择输入流如何发送。"
+
+#: modules/gui/macosx/wizard.m:363 modules/gui/macosx/wizard.m:424
+#: modules/gui/qt4/dialogs/convert.cpp:55 modules/stream_out/rtp.c:74
+msgid "Destination"
+msgstr "目标"
+
+#: modules/gui/macosx/wizard.m:364 modules/gui/macosx/wizard.m:436
+msgid "Streaming method"
+msgstr "流模式"
+
+#: modules/gui/macosx/wizard.m:365
+msgid "Address of the computer to stream to."
+msgstr "要发送流的目标计算机地址。"
+
+#: modules/gui/macosx/wizard.m:367
+msgid "UDP Unicast"
+msgstr "UDP 单播"
+
+#: modules/gui/macosx/wizard.m:368
+msgid "UDP Multicast"
+msgstr "UDP 多播"
+
+#: modules/gui/macosx/wizard.m:373
+#: modules/stream_out/transcode/transcode.c:147
+msgid "Transcode"
+msgstr "转码"
+
+#: modules/gui/macosx/wizard.m:374
+msgid ""
+"This page allows changing the compression format of the audio or video "
+"tracks. To change only the container format, proceed to next page."
+msgstr ""
+"此页可更改音频或视频轨道的压缩格式。如果只要更改容器的格式，请转到下一页。"
+
+#: modules/gui/macosx/wizard.m:379 modules/gui/macosx/wizard.m:438
+msgid "Transcode audio"
+msgstr "转码音频"
+
+#: modules/gui/macosx/wizard.m:380 modules/gui/macosx/wizard.m:440
+msgid "Transcode video"
+msgstr "转码视频"
+
+#: modules/gui/macosx/wizard.m:383 modules/gui/macosx/wizard.m:1742
+msgid ""
+"Enabling this allows transcoding the audio track if one is present in the "
+"stream."
+msgstr "启用本选项可允许转码流中的音频轨道。"
+
+#: modules/gui/macosx/wizard.m:385 modules/gui/macosx/wizard.m:1759
+msgid ""
+"Enabling this allows transcoding the video track if one is present in the "
+"stream."
+msgstr "启用本选项可允许转码流中的视频轨道。"
+
+#: modules/gui/macosx/wizard.m:389
+msgid "Encapsulation format"
+msgstr "封装格式"
+
+#: modules/gui/macosx/wizard.m:390
+msgid ""
+"This page allows selecting how the stream will be encapsulated. Depending on "
+"previously chosen settings all formats won't be available."
+msgstr "此页可选择流将被如何封装。根据先前选择的设置，可能不是所有格式都可用。"
+
+#: modules/gui/macosx/wizard.m:395
+msgid "Additional streaming options"
+msgstr "附加流选项"
+
+#: modules/gui/macosx/wizard.m:396
+msgid "In this page, a few additional streaming parameters can be set."
+msgstr "在此页中，可以设置一些附加的流参数。"
+
+#: modules/gui/macosx/wizard.m:398 modules/gui/macosx/wizard.m:1787
+msgid "Time-To-Live (TTL)"
+msgstr "实时 (TTL)"
+
+#: modules/gui/macosx/wizard.m:402 modules/gui/macosx/wizard.m:412
+#: modules/gui/macosx/wizard.m:444 modules/gui/macosx/wizard.m:1811
+msgid "Local playback"
+msgstr "本地播放"
+
+#: modules/gui/macosx/wizard.m:404 modules/gui/macosx/wizard.m:413
+msgid "Add Subtitles to transcoded video"
+msgstr "添加字幕到已转换的视频"
+
+#: modules/gui/macosx/wizard.m:407
+msgid "Additional transcode options"
+msgstr "附加转码选项"
+
+#: modules/gui/macosx/wizard.m:408
+msgid "In this page, a few additional transcoding parameters can be set."
+msgstr "在此页中，可以设置一些附加的转码参数。"
+
+#: modules/gui/macosx/wizard.m:410 modules/gui/macosx/wizard.m:1025
+msgid "Select the file to save to"
+msgstr "选择要保存的文件"
+
+#: modules/gui/macosx/wizard.m:414
+msgid ""
+"Adds available subtitles directly to the video. These cannot be disabled by "
+"the receiving user as they become part of the image."
+msgstr "添加要直接用于视频的字幕。这些不会显示给接收用户而是作为图像的一部分。"
+
+#: modules/gui/macosx/wizard.m:421
+msgid ""
+"This page lists all the settings. Click \"Finish\" to start streaming or "
+"transcoding."
+msgstr "此页列出所有设置。单击 \"完成\" 开始串流或转码。"
+
+#: modules/gui/macosx/wizard.m:423
+msgid "Summary"
+msgstr "摘要"
+
+#: modules/gui/macosx/wizard.m:426
+msgid "Encap. format"
+msgstr "Encap. 格式"
+
+#: modules/gui/macosx/wizard.m:428
+msgid "Input stream"
+msgstr "输入流"
+
+#: modules/gui/macosx/wizard.m:434
+msgid "Save file to"
+msgstr "保存文件到"
+
+#: modules/gui/macosx/wizard.m:442
+msgid "Include subtitles"
+msgstr "包含字幕"
+
+#: modules/gui/macosx/wizard.m:591
+msgid "No input selected"
+msgstr "未选择输入"
+
+#: modules/gui/macosx/wizard.m:593
+msgid ""
+"No new stream or valid playlist item has been selected.\n"
+"\n"
+"Choose one before going to the next page."
+msgstr ""
+"未选择新的流或可用的播放列表。\n"
+"\n"
+"在转到下一页之前选择一个项目。"
+
+#: modules/gui/macosx/wizard.m:652
+msgid "No valid destination"
+msgstr "无有效的目标"
+
+#: modules/gui/macosx/wizard.m:654
+msgid ""
+"A valid destination has to be selected Enter either a Unicast-IP or a "
+"Multicast-IP.\n"
+"\n"
+"If you don't know what this means, have a look at the VLC Streaming HOWTO "
+"and the help texts in this window."
+msgstr ""
+"通过输入一个单播 IP 或一个多播 IP 选择一个有效的目标。\n"
+"\n"
+"如果您不知道这意味着什么，请查看此窗口中有关的 VLC 流的如何帮助文本。"
+
+#: modules/gui/macosx/wizard.m:993
+msgid ""
+"The chosen codecs are not compatible with each other. For example: It is not "
+"possible to mix uncompressed audio with any video codec.\n"
+"\n"
+"Correct your selection and try again."
+msgstr ""
+"选择的编解码器不相互兼容。例如: 无法用任何视频编解码器混流未压缩的音频。\n"
+"\n"
+"请更正您的选择后再试。"
+
+#: modules/gui/macosx/wizard.m:1020
+msgid "Select the directory to save to"
+msgstr "请选择要保存到的目录"
+
+#: modules/gui/macosx/wizard.m:1072
+msgid "No folder selected"
+msgstr "未选择文件夹"
+
+#: modules/gui/macosx/wizard.m:1074
+msgid "A directory where to save the files has to be selected."
+msgstr "要选择一个保存文件的目录。"
+
+#: modules/gui/macosx/wizard.m:1076
+msgid ""
+"Enter either a valid path or use the \"Choose...\" button to select a "
+"location."
+msgstr "请输入一个有效的逻辑或通过 \"选择...\" 按钮选择一个位置。"
+
+#: modules/gui/macosx/wizard.m:1079
+msgid "No file selected"
+msgstr "未选择文件"
+
+#: modules/gui/macosx/wizard.m:1081
+msgid "A file where to save the stream has to be selected."
+msgstr "要选择一个保存流的文件。"
+
+#: modules/gui/macosx/wizard.m:1083
+msgid ""
+"Enter either a valid path or use the \"Choose\" button to select a location."
+msgstr "请输入一个有效的逻辑或通过 \"选择...\" 按钮选择一个位置。"
+
+#: modules/gui/macosx/wizard.m:1294
+msgid "Finish"
+msgstr "完成"
+
+#: modules/gui/macosx/wizard.m:1299
+#, c-format
+msgid "%i items"
+msgstr "%i 个项目"
+
+#: modules/gui/macosx/wizard.m:1307 modules/gui/macosx/wizard.m:1336
+#: modules/gui/macosx/wizard.m:1366
+msgid "yes"
+msgstr "是"
+
+#: modules/gui/macosx/wizard.m:1309 modules/gui/macosx/wizard.m:1319
+#: modules/gui/macosx/wizard.m:1332 modules/gui/macosx/wizard.m:1338
+#: modules/gui/macosx/wizard.m:1350 modules/gui/macosx/wizard.m:1369
+msgid "no"
+msgstr "否"
+
+#: modules/gui/macosx/wizard.m:1315
+msgid "yes: from %@ to %@"
+msgstr "是: 从 %@ 到 %@"
+
+#: modules/gui/macosx/wizard.m:1325 modules/gui/macosx/wizard.m:1343
+msgid "yes: %@ @ %@ kb/s"
+msgstr "是: %@ @ %@ kb/s"
+
+#: modules/gui/macosx/wizard.m:1609
+msgid "This allows streaming on a network."
+msgstr "这将允许在网络中串流。"
+
+#: modules/gui/macosx/wizard.m:1617
+msgid ""
+"This allows saving a stream to a file. The can be reencoded on the fly. "
+"Whatever VLC can read can be saved.\n"
+"Please note that VLC is not very suited for file to file transcoding. Its "
+"transcoding features are however useful to save network streams, for example."
+msgstr ""
+"这允许将流保存为文件。流可实时重编码。只要 VLC 可以读取都能保存。\n"
+"请注意 VLC 不是非常适合进行文件到文件的转码。然而它的转码功能适合用来保存网络"
+"流等。"
+
+#: modules/gui/macosx/wizard.m:1737
+msgid "Select your audio codec. Click one to get more information."
+msgstr "请选择您的音频编解码器。点击获取更多信息。"
+
+#: modules/gui/macosx/wizard.m:1754
+msgid "Select your video codec. Click one to get more information."
+msgstr "请选择您的视频编解码器。点击获取更多信息。"
+
+#: modules/gui/macosx/wizard.m:1789
+msgid ""
+"This allows defining the TTL (Time-To-Live) of the stream. This parameter is "
+"the maximum number of routers your stream can go through. If you don't know "
+"what it means, or if you want to stream on your local network only, leave "
+"this setting to 1."
+msgstr ""
+"这允许您定义流的 TTL (存活时间)。此参数是您的流可以在路由中被传送的最大数目。"
+"如果您不知道这意味这什么或者您希望流仅在您的本地网络中传送，请保持此设置为 "
+"1。"
+
+#: modules/gui/macosx/wizard.m:1800
+msgid ""
+"When streaming using UDP, the streams can be announced using the SAP/SDP "
+"announcing protocol. This way, the clients won't have to type in the "
+"multicast address, it will appear in their playlist if they enable the SAP "
+"extra interface.\n"
+"If you want to give a name to your stream, enter it here, else, a default "
+"name will be used."
+msgstr ""
+"当流使用 UDP 时，流可以通过 SAP/SDP 广播协议进行广播。此方式中，客户端无需输"
+"入多播地址，如果它们开启了 SAP 扩展界面，那么将会自动出现在播放列表中。\n"
+"如果您想给您的流取个名字，请在这里输入，否则将使用默认的名称。"
+
+#: modules/gui/macosx/wizard.m:1813
+msgid ""
+"When this option is enabled, the stream will be both played and transcoded/"
+"streamed.\n"
+"\n"
+"Note that this requires much more CPU power than simple transcoding or "
+"streaming."
+msgstr ""
+"在此选项开启后，流将同时被播放并转码/流式化。\n"
+"\n"
+"注意这将比单纯的转码和流式化需要更多的 CPU 资源。"
+
+#: modules/gui/minimal_macosx/macosx.c:57
+msgid "Minimal Mac OS X interface"
+msgstr "最小化 Mac OS X 界面"
+
+#: modules/gui/ncurses.c:70
+msgid "Filebrowser starting point"
+msgstr "文件浏览器启始点"
+
+#: modules/gui/ncurses.c:72
+msgid ""
+"This option allows you to specify the directory the ncurses filebrowser will "
+"show you initially."
+msgstr "此选项将允许您指定在文件浏览器启动后默认显示的目录。"
+
+#: modules/gui/ncurses.c:77
+msgid "Ncurses interface"
+msgstr "Ncurses 界面"
+
+#: modules/gui/ncurses.c:775
+#, c-format
+msgid " [%s]"
+msgstr " [%s]"
+
+#: modules/gui/ncurses.c:779
+#, c-format
+msgid " %s: %s"
+msgstr " %s: %s"
+
+#: modules/gui/ncurses.c:873
+msgid "[Display]"
+msgstr "[显示]"
+
+#: modules/gui/ncurses.c:875
+msgid " h,H Show/Hide help box"
+msgstr " h,H 显示/隐藏帮助框"
+
+#: modules/gui/ncurses.c:876
+msgid " i Show/Hide info box"
+msgstr " i 显示/隐藏信息框"
+
+#: modules/gui/ncurses.c:877
+msgid " M Show/Hide metadata box"
+msgstr " M 显示/隐藏元数据对话框"
+
+#: modules/gui/ncurses.c:878
+msgid " L Show/Hide messages box"
+msgstr " L 显示/隐藏消息框"
+
+#: modules/gui/ncurses.c:879
+msgid " P Show/Hide playlist box"
+msgstr " P 显示/隐藏播放列表框"
+
+#: modules/gui/ncurses.c:880
+msgid " B Show/Hide filebrowser"
+msgstr " B 显示/隐藏文件浏览器"
+
+#: modules/gui/ncurses.c:881
+msgid " x Show/Hide objects box"
+msgstr " x 显示/隐藏对象框"
+
+#: modules/gui/ncurses.c:882
+msgid " S Show/Hide statistics box"
+msgstr " S 显示/隐藏统计框"
+
+#: modules/gui/ncurses.c:883
+msgid " Esc Close Add/Search entry"
+msgstr " Esc 关闭添加/搜索项"
+
+#: modules/gui/ncurses.c:884
+msgid " Ctrl-l Refresh the screen"
+msgstr " Ctrl-l 刷新屏幕"
+
+#: modules/gui/ncurses.c:888
+msgid "[Global]"
+msgstr "[全局]"
+
+#: modules/gui/ncurses.c:890
+msgid " q, Q, Esc Quit"
+msgstr " q, Q, Esc 退出"
+
+#: modules/gui/ncurses.c:891
+msgid " s Stop"
+msgstr " s 停止"
+
+#: modules/gui/ncurses.c:892
+msgid " <space> Pause/Play"
+msgstr " <space> 暂停/播放"
+
+#: modules/gui/ncurses.c:893
+msgid " f Toggle Fullscreen"
+msgstr " f 切换全屏"
+
+#: modules/gui/ncurses.c:894
+#, fuzzy
+msgid " c Cycle through audio tracks"
+msgstr " l 切换循环播放列表"
+
+#: modules/gui/ncurses.c:895
+#, fuzzy
+msgid " v Cycle through subtitles tracks"
+msgstr " [, ] 下一个/上一个标题"
+
+#: modules/gui/ncurses.c:896
+#, fuzzy
+msgid " b Cycle through video tracks"
+msgstr " S 显示/隐藏统计框"
+
+#: modules/gui/ncurses.c:897
+msgid " n, p Next/Previous playlist item"
+msgstr " n, p 下一个/上一个播放列表项目"
+
+#: modules/gui/ncurses.c:898
+msgid " [, ] Next/Previous title"
+msgstr " [, ] 下一个/上一个标题"
+
+#: modules/gui/ncurses.c:899
+msgid " <, > Next/Previous chapter"
+msgstr " <, > 下一个/上一个章节"
+
+#. xgettext: You can use ← and → characters
+#: modules/gui/ncurses.c:901
+#, c-format
+msgid " <left>,<right> Seek -/+ 1%%"
+msgstr " <left>,<right> 定位 -/+ 1%%"
+
+#: modules/gui/ncurses.c:902
+msgid " a, z Volume Up/Down"
+msgstr " a, z 音量增/减"
+
+#: modules/gui/ncurses.c:903
+msgid " m Mute"
+msgstr " m 静音"
+
+#. xgettext: You can use ↑ and ↓ characters
+#: modules/gui/ncurses.c:905
+msgid " <up>,<down> Navigate through the box line by line"
+msgstr " <up>,<down> 逐行浏览对话框"
+
+#. xgettext: You can use ⇞ and ⇟ characters
+#: modules/gui/ncurses.c:907
+msgid " <pageup>,<pagedown> Navigate through the box page by page"
+msgstr " <pageup>,<pagedown> 逐页浏览对话框"
+
+#. xgettext: You can use ↖ and ↘ characters
+#: modules/gui/ncurses.c:909
+msgid " <start>,<end> Navigate to start/end of box"
+msgstr " <start>,<end> 转到列表框开头/结尾"
+
+#: modules/gui/ncurses.c:913
+msgid "[Playlist]"
+msgstr "[播放列表]"
+
+#: modules/gui/ncurses.c:915
+msgid " r Toggle Random playing"
+msgstr " r 切换随机播放"
+
+#: modules/gui/ncurses.c:916
+msgid " l Toggle Loop Playlist"
+msgstr " l 切换循环播放列表"
+
+#: modules/gui/ncurses.c:917
+msgid " R Toggle Repeat item"
+msgstr " R 切换重复项目"
+
+#: modules/gui/ncurses.c:918
+msgid " o Order Playlist by title"
+msgstr " o 按标题排序播放列表"
+
+#: modules/gui/ncurses.c:919
+msgid " O Reverse order Playlist by title"
+msgstr " O 按标题反向排序播放列表"
+
+#: modules/gui/ncurses.c:920
+msgid " g Go to the current playing item"
+msgstr " g 转到当前正在播放的项目"
+
+#: modules/gui/ncurses.c:921
+msgid " / Look for an item"
+msgstr " / 查找一个项目"
+
+#: modules/gui/ncurses.c:922
+msgid " ; Look for the next item"
+msgstr " ; 查找下一项"
+
+#: modules/gui/ncurses.c:923
+msgid " A Add an entry"
+msgstr " A 添加一项"
+
+#. xgettext: You can use ⌫ character to translate <backspace>
+#: modules/gui/ncurses.c:925
+msgid " D, <backspace>, <del> Delete an entry"
+msgstr " D, <backspace>, <del> 删除一项"
+
+#: modules/gui/ncurses.c:926
+msgid " e Eject (if stopped)"
+msgstr " e 弹出 (如果已停止)"
+
+#: modules/gui/ncurses.c:930
+msgid "[Filebrowser]"
+msgstr "[文件浏览器]"
+
+#: modules/gui/ncurses.c:932
+msgid " <enter> Add the selected file to the playlist"
+msgstr " <enter> 添加选定的文件到播放列表中"
+
+#: modules/gui/ncurses.c:933
+msgid " <space> Add the selected directory to the playlist"
+msgstr " <space> 添加选定的目录到播放列表中"
+
+#: modules/gui/ncurses.c:934
+msgid " . Show/Hide hidden files"
+msgstr " . 显示/隐藏隐藏文件"
+
+#: modules/gui/ncurses.c:938
+msgid "[Player]"
+msgstr "[播放器]"
+
+#. xgettext: You can use ↑ and ↓ characters
+#: modules/gui/ncurses.c:941
+#, c-format
+msgid " <up>,<down> Seek +/-5%%"
+msgstr " <up>,<down> 定位 +/-5%%"
+
+#: modules/gui/ncurses.c:1061
+msgid "[Repeat] "
+msgstr "[重复] "
+
+#: modules/gui/ncurses.c:1062
+msgid "[Random] "
+msgstr "[随机] "
+
+#: modules/gui/ncurses.c:1063
+msgid "[Loop]"
+msgstr "[循环]"
+
+#: modules/gui/ncurses.c:1072
+#, c-format
+msgid " Source : %s"
+msgstr " 源 : %s"
+
+#: modules/gui/ncurses.c:1105
+#, c-format
+msgid " Position : %s/%s"
+msgstr " 位置 : %s/%s"
+
+#: modules/gui/ncurses.c:1110
+msgid " Volume : Mute"
+msgstr " 音量 : 静音"
+
+#: modules/gui/ncurses.c:1111
+#, c-format
+msgid " Volume : %3ld%%"
+msgstr " 音量 : %3ld%%"
+
+#: modules/gui/ncurses.c:1111
+msgid " Volume : ----"
+msgstr " 音量 : ----"
+
+#: modules/gui/ncurses.c:1117
+#, c-format
+msgid " Title : %<PRId64>/%d"
+msgstr " 标题 : %<PRId64>/%d"
+
+#: modules/gui/ncurses.c:1123
+#, c-format
+msgid " Chapter : %<PRId64>/%d"
+msgstr " 章节 : %<PRId64>/%d"
+
+#: modules/gui/ncurses.c:1128
+msgid " Source: <no current item> "
+msgstr " 来源 : <当前无项目> "
+
+#: modules/gui/ncurses.c:1130
+msgid " [ h for help ]"
+msgstr " [ h 获取帮助 ]"
+
+#: modules/gui/ncurses.c:1151
+#, c-format
+msgid "Open: %s"
+msgstr "打开: %s"
+
+#: modules/gui/ncurses.c:1153
+#, c-format
+msgid "Find: %s"
+msgstr "查找: %s"
+
+#: modules/gui/qt4/components/controller.cpp:340
+msgid "Shift+L"
+msgstr "Shift+L"
+
+#: modules/gui/qt4/components/controller.cpp:445
+msgid "Click to toggle between loop all, loop one and no loop"
+msgstr "单击可切换循环全部/循环单首/不循环"
+
+#: modules/gui/qt4/components/controller.cpp:536
+msgid "Previous Chapter/Title"
+msgstr "上一个章节/标题"
+
+#: modules/gui/qt4/components/controller.cpp:548
+msgid "Next Chapter/Title"
+msgstr "下一个章节/标题"
+
+#: modules/gui/qt4/components/controller.cpp:581
+msgid "Teletext Activation"
+msgstr "Teletext 激活"
+
+#: modules/gui/qt4/components/controller.cpp:597
+msgid "Toggle Transparency "
+msgstr "打开或关闭透明度"
+
+#: modules/gui/qt4/components/controller.hpp:43
+msgid ""
+"Play\n"
+"If the playlist is empty, open a medium"
+msgstr ""
+"播放\n"
+"如果播放列表为空则打开一个媒体"
+
+#: modules/gui/qt4/components/controller.hpp:116
+msgid "Previous / Backward"
+msgstr "上一个 / 快退"
+
+#: modules/gui/qt4/components/controller.hpp:116
+msgid "Next / Forward"
+msgstr "下一个 / 快进"
+
+#: modules/gui/qt4/components/controller.hpp:117
+msgid "De-Fullscreen"
+msgstr "取消全屏幕"
+
+#: modules/gui/qt4/components/controller.hpp:117
+msgid "Extended panel"
+msgstr "扩展面板"
+
+#: modules/gui/qt4/components/controller.hpp:118
+msgid "A->B Loop"
+msgstr "A->B 循环"
+
+#: modules/gui/qt4/components/controller.hpp:118
+msgid "Frame By Frame"
+msgstr "逐帧"
+
+#: modules/gui/qt4/components/controller.hpp:118
+msgid "Trickplay Reverse"
+msgstr "Trickplay 反序"
+
+#: modules/gui/qt4/components/controller.hpp:119
+#: modules/gui/qt4/components/controller.hpp:131
+msgid "Step backward"
+msgstr "往回步进"
+
+#: modules/gui/qt4/components/controller.hpp:119
+#: modules/gui/qt4/components/controller.hpp:131
+msgid "Step forward"
+msgstr "向前步进"
+
+#: modules/gui/qt4/components/controller.hpp:120
+msgid "Loop / Repeat"
+msgstr "循环 / 重复模式"
+
+#: modules/gui/qt4/components/controller.hpp:121
+msgid "Open subtitles"
+msgstr "打开字幕"
+
+#: modules/gui/qt4/components/controller.hpp:121
+msgid "Dock fullscreen controller"
+msgstr "全屏控制器停靠"
+
+#: modules/gui/qt4/components/controller.hpp:124
+msgid "Stop playback"
+msgstr "停止播放"
+
+#: modules/gui/qt4/components/controller.hpp:124
+msgid "Open a medium"
+msgstr "打开一个媒介"
+
+#: modules/gui/qt4/components/controller.hpp:125
+msgid "Previous media in the playlist, skip backward when held"
+msgstr "播放列表中的上一个媒体，按住可快退"
+
+#: modules/gui/qt4/components/controller.hpp:126
+msgid "Next media in the playlist, skip forward when held"
+msgstr "播放列表中的下一个媒体，按住可快进"
+
+#: modules/gui/qt4/components/controller.hpp:127
+msgid "Toggle the video in fullscreen"
+msgstr "切换全屏幕中的视频"
+
+#: modules/gui/qt4/components/controller.hpp:127
+msgid "Toggle the video out fullscreen"
+msgstr "将视频切换出全屏状态"
+
+#: modules/gui/qt4/components/controller.hpp:128
+msgid "Show extended settings"
+msgstr "显示扩展设置"
+
+#: modules/gui/qt4/components/controller.hpp:128
+msgid "Toggle playlist"
+msgstr "切换播放列表"
+
+#: modules/gui/qt4/components/controller.hpp:129
+msgid "Take a snapshot"
+msgstr "捕获截图"
+
+#: modules/gui/qt4/components/controller.hpp:130
+msgid "Loop from point A to point B continuously."
+msgstr "连续地从点 A 到点 B 循环。"
+
+#: modules/gui/qt4/components/controller.hpp:130
+msgid "Frame by frame"
+msgstr "逐帧"
+
+#: modules/gui/qt4/components/controller.hpp:131
+msgid "Reverse"
+msgstr "倒序"
+
+#: modules/gui/qt4/components/controller.hpp:132
+msgid "Change the loop and repeat modes"
+msgstr "更改循环与重复模式"
+
+#: modules/gui/qt4/components/controller.hpp:133
+msgid "Previous media in the playlist"
+msgstr "上一个在播放列表中的媒体"
+
+#: modules/gui/qt4/components/controller.hpp:133
+msgid "Next media in the playlist"
+msgstr "下一个在播放列表中的媒体"
+
+#: modules/gui/qt4/components/controller.hpp:134
+#: modules/gui/qt4/components/open_panels.cpp:253
+msgid "Open subtitle file"
+msgstr "打开字幕文件"
+
+#: modules/gui/qt4/components/controller.hpp:135
+msgid "Dock/undock fullscreen controller to/from bottom of screen"
+msgstr "将全屏控制器固定/取消固定到屏幕底部"
+
+#: modules/gui/qt4/components/controller_widget.cpp:132
+msgctxt "Tooltip|Unmute"
+msgid "Unmute"
+msgstr "取消静音"
+
+#: modules/gui/qt4/components/controller_widget.cpp:141
+msgctxt "Tooltip|Mute"
+msgid "Mute"
+msgstr "静音"
+
+#: modules/gui/qt4/components/controller_widget.cpp:227
+msgid "Pause the playback"
+msgstr "暂停回放"
+
+#: modules/gui/qt4/components/controller_widget.cpp:236
+msgid ""
+"Loop from point A to point B continuously\n"
+"Click to set point A"
+msgstr ""
+"连续的从点 A 到点 B 的循环。\n"
+"单击设置点 A"
+
+#: modules/gui/qt4/components/controller_widget.cpp:242
+msgid "Click to set point B"
+msgstr "单击设置点 B"
+
+#: modules/gui/qt4/components/controller_widget.cpp:247
+msgid "Stop the A to B loop"
+msgstr "停止 A 到 B 循环"
+
+#: modules/gui/qt4/components/controller_widget.cpp:268
+msgid "Aspect Ratio"
+msgstr "宽高比"
+
+#: modules/gui/qt4/components/extended_panels.cpp:437
+#: modules/video_filter/logo.c:48
+msgid "Logo filenames"
+msgstr "标志文件名"
+
+#: modules/gui/qt4/components/extended_panels.cpp:445
+#: modules/video_filter/erase.c:55
+msgid "Image mask"
+msgstr "图像掩码"
+
+#: modules/gui/qt4/components/extended_panels.cpp:699
+msgid ""
+"No v4l2 instance found.\n"
+"Please check that the device has been opened with VLC and is playing.\n"
+"\n"
+"Controls will automatically appear here."
+msgstr ""
+"未找到 v4l2 实例。\n"
+"请检查是否已通过 VLC 打开该设备且正在播放。\n"
+"\n"
+"控件将自动出现在这里。"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1184
+#: modules/gui/qt4/components/extended_panels.cpp:1185
+#: modules/gui/qt4/components/extended_panels.cpp:1186
+#: modules/gui/qt4/components/extended_panels.cpp:1187
+#: modules/gui/qt4/components/extended_panels.cpp:1188
+#: modules/gui/qt4/components/extended_panels.cpp:1189
+#: modules/gui/qt4/components/extended_panels.cpp:1190
+#: modules/gui/qt4/components/extended_panels.cpp:1191
+#: modules/gui/qt4/components/extended_panels.cpp:1192
+#: modules/gui/qt4/components/extended_panels.cpp:1193
+#: modules/gui/qt4/components/extended_panels.cpp:1197
+#: modules/gui/qt4/components/extended_panels.cpp:1198
+#: modules/gui/qt4/components/extended_panels.cpp:1199
+#: modules/gui/qt4/components/extended_panels.cpp:1200
+#: modules/gui/qt4/components/extended_panels.cpp:1201
+#: modules/gui/qt4/components/extended_panels.cpp:1202
+#: modules/gui/qt4/components/extended_panels.cpp:1203
+#: modules/gui/qt4/components/extended_panels.cpp:1204
+#: modules/gui/qt4/components/extended_panels.cpp:1205
+#: modules/gui/qt4/components/extended_panels.cpp:1206
+#: modules/gui/qt4/components/extended_panels.cpp:1209
+#: modules/gui/qt4/components/extended_panels.cpp:1375
+#: modules/gui/qt4/components/extended_panels.cpp:1377
+#: modules/gui/qt4/components/extended_panels.cpp:1378
+msgid "dB"
+msgstr "dB"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1185
+msgid "170 Hz"
+msgstr "170 Hz"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1186
+msgid "310 Hz"
+msgstr "310 Hz"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1187
+msgid "600 Hz"
+msgstr "600 Hz"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1188
+#: modules/gui/qt4/components/extended_panels.cpp:1202
+msgid "1 KHz"
+msgstr "1 KHz"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1189
+msgid "3 KHz"
+msgstr "3 KHz"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1190
+msgid "6 KHz"
+msgstr "6 KHz"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1191
+msgid "12 KHz"
+msgstr "12 KHz"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1192
+msgid "14 KHz"
+msgstr "14 KHz"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1193
+#: modules/gui/qt4/components/extended_panels.cpp:1206
+msgid "16 KHz"
+msgstr "16 KHz"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1197
+msgid "31 Hz"
+msgstr "31 Hz"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1198
+msgid "63 Hz"
+msgstr "63 Hz"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1199
+msgid "125 Hz"
+msgstr "125 Hz"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1200
+msgid "250 Hz"
+msgstr "250 Hz"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1201
+msgid "500 Hz"
+msgstr "500 Hz"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1203
+msgid "2 KHz"
+msgstr "2 KHz"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1204
+msgid "4 KHz"
+msgstr "4 KHz"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1205
+msgid "8 KHz"
+msgstr "8 KHz"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1373
+#: modules/gui/qt4/components/extended_panels.cpp:1374
+msgid "ms"
+msgstr "ms"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1377
+msgid ""
+"Knee\n"
+"radius"
+msgstr ""
+"Knee\n"
+"半径"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1378
+msgid ""
+"Makeup\n"
+"gain"
+msgstr ""
+"补偿\n"
+"增益"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1433
+msgid "(Hastened)"
+msgstr "(提前)"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1435
+msgid "(Delayed)"
+msgstr "(延迟)"
+
+#: modules/gui/qt4/components/extended_panels.cpp:1522
+msgid "Force update of this dialog's values"
+msgstr "强制更新此对话框的值"
+
+#: modules/gui/qt4/components/info_panels.cpp:150
+msgid "&Fingerprint"
+msgstr "指纹(&F)"
+
+#: modules/gui/qt4/components/info_panels.cpp:151
+msgid "Find meta data using audio fingerprinting"
+msgstr "通过音频指纹查找元数据"
+
+#: modules/gui/qt4/components/info_panels.cpp:391
+msgid "Extra metadata and other information are shown in this panel.\n"
+msgstr "将在此面板中显示扩展元数据和其它信息。\n"
+
+#: modules/gui/qt4/components/info_panels.cpp:463
+msgid ""
+"Information about what your media or stream is made of.\n"
+"Muxer, Audio and Video Codecs, Subtitles are shown."
+msgstr ""
+"有关您媒体或流的制作信息。\n"
+"将显示复用器、音频和视频编解码器以及字幕。"
+
+#: modules/gui/qt4/components/info_panels.cpp:540
+msgid "Current media / stream statistics"
+msgstr "当前媒体 / 流统计"
+
+#: modules/gui/qt4/components/info_panels.cpp:566
+msgid "Input/Read"
+msgstr "输入/读取"
+
+#: modules/gui/qt4/components/info_panels.cpp:567
+msgid "Output/Written/Sent"
+msgstr "输出/已写/已发"
+
+#: modules/gui/qt4/components/info_panels.cpp:569
+msgid "Media data size"
+msgstr "媒体数据尺寸"
+
+#: modules/gui/qt4/components/info_panels.cpp:575
+msgid "Demuxed data size"
+msgstr "已去复用的数据尺寸"
+
+#: modules/gui/qt4/components/info_panels.cpp:576
+msgid "Content bitrate"
+msgstr "内容位率"
+
+#: modules/gui/qt4/components/info_panels.cpp:578
+msgid "Discarded (corrupted)"
+msgstr "已丢弃 (已损坏)"
+
+#: modules/gui/qt4/components/info_panels.cpp:580
+msgid "Dropped (discontinued)"
+msgstr "已丢弃 (非连续)"
+
+#: modules/gui/qt4/components/info_panels.cpp:583
+#: modules/gui/qt4/components/info_panels.cpp:596
+msgid "Decoded"
+msgstr "已解码"
+
+#: modules/gui/qt4/components/info_panels.cpp:584
+#: modules/gui/qt4/components/info_panels.cpp:597
+msgid "blocks"
+msgstr "块"
+
+#: modules/gui/qt4/components/info_panels.cpp:585
+msgid "Displayed"
+msgstr "已显示"
+
+#: modules/gui/qt4/components/info_panels.cpp:586
+#: modules/gui/qt4/components/info_panels.cpp:588
+msgid "frames"
+msgstr "帧"
+
+#: modules/gui/qt4/components/info_panels.cpp:587
+#: modules/gui/qt4/components/info_panels.cpp:600
+msgid "Lost"
+msgstr "丢失"
+
+#: modules/gui/qt4/components/info_panels.cpp:590
+#: modules/gui/qt4/components/info_panels.cpp:591
+msgid "Sent"
+msgstr "已发送"
+
+#: modules/gui/qt4/components/info_panels.cpp:590
+msgid "packets"
+msgstr "数据包"
+
+#: modules/gui/qt4/components/info_panels.cpp:593
+msgid "Upstream rate"
+msgstr "上行位率"
+
+#: modules/gui/qt4/components/info_panels.cpp:598
+msgid "Played"
+msgstr "已播放"
+
+#: modules/gui/qt4/components/info_panels.cpp:599
+#: modules/gui/qt4/components/info_panels.cpp:600
+msgid "buffers"
+msgstr "缓冲器"
+
+#: modules/gui/qt4/components/info_panels.cpp:622
+msgid "Last 60 seconds"
+msgstr "最后 60 秒"
+
+#: modules/gui/qt4/components/info_panels.cpp:623
+msgid "Overall"
+msgstr "全局"
+
+#: modules/gui/qt4/components/interface_widgets.cpp:427
+msgid "Current visualization"
+msgstr "当前的可视化"
+
+#: modules/gui/qt4/components/interface_widgets.cpp:466
+msgid ""
+"Current playback speed: %1\n"
+"Click to adjust"
+msgstr ""
+"当前回放速度: %1\n"
+"点击调整"
+
+#: modules/gui/qt4/components/interface_widgets.cpp:540
+msgid "Revert to normal play speed"
+msgstr "恢复普通播放速度"
+
+#: modules/gui/qt4/components/interface_widgets.cpp:646
+msgid "Download cover art"
+msgstr "下载封面"
+
+#: modules/gui/qt4/components/interface_widgets.cpp:650
+msgid "Add cover art from file"
+msgstr "从文件添加专辑封面"
+
+#: modules/gui/qt4/components/interface_widgets.cpp:716
+msgid "Choose Cover Art"
+msgstr "选择专辑封面"
+
+#: modules/gui/qt4/components/interface_widgets.cpp:717
+msgid "Image Files (*.gif *.jpg *.jpeg *.png)"
+msgstr "图像文件 (*.gif *.jpg *.jpeg *.png)"
+
+#: modules/gui/qt4/components/interface_widgets.cpp:741
+#: modules/gui/qt4/dialogs/toolbar.cpp:544
+msgid "Elapsed time"
+msgstr "已用时间"
+
+#: modules/gui/qt4/components/interface_widgets.cpp:745
+#: modules/gui/qt4/dialogs/toolbar.cpp:548
+msgid "Total/Remaining time"
+msgstr "总计/剩余时间"
+
+#: modules/gui/qt4/components/interface_widgets.cpp:747
+msgid "Click to toggle between total and remaining time"
+msgstr "点击可在总时长与剩余时间之间切换"
+
+#: modules/gui/qt4/components/interface_widgets.cpp:753
+msgid "Click to toggle between elapsed and remaining time"
+msgstr "点击可在已用和剩余时间之间切换"
+
+#: modules/gui/qt4/components/interface_widgets.cpp:755
+msgid "Double click to jump to a chosen time position"
+msgstr "双击跳到选定时间位置"
+
+#: modules/gui/qt4/components/open_panels.cpp:58
+msgid "Select a device or a VIDEO_TS directory"
+msgstr "选择设备或 VIDEO_TS 目录"
+
+#: modules/gui/qt4/components/open_panels.cpp:59
+msgid "Select a device or a VIDEO_TS folder"
+msgstr "选择设备或 VIDEO_TS 目录"
+
+#: modules/gui/qt4/components/open_panels.cpp:145
+#: modules/gui/qt4/components/open_panels.cpp:223
+msgid "Select one or multiple files"
+msgstr "选择一个或多个文件"
+
+#: modules/gui/qt4/components/open_panels.cpp:160
+msgid "File names:"
+msgstr "文件名:"
+
+#: modules/gui/qt4/components/open_panels.cpp:162
+#: modules/gui/qt4/ui/sprefs_interface.h:532
+msgid "Filter:"
+msgstr "筛选:"
+
+#: modules/gui/qt4/components/open_panels.cpp:355
+msgid "Eject the disc"
+msgstr "弹出光盘"
+
+#: modules/gui/qt4/components/open_panels.cpp:850
+msgid "Channels:"
+msgstr "频道:"
+
+#: modules/gui/qt4/components/open_panels.cpp:861
+msgid "Selected ports:"
+msgstr "选择的端口:"
+
+#: modules/gui/qt4/components/open_panels.cpp:864
+msgid ".*"
+msgstr ".*"
+
+#: modules/gui/qt4/components/open_panels.cpp:871
+msgid "Use VLC pace"
+msgstr "使用 VLC 步"
+
+#: modules/gui/qt4/components/open_panels.cpp:891
+msgid "TV - digital"
+msgstr "TV - 数字"
+
+#: modules/gui/qt4/components/open_panels.cpp:894
+msgid "Tuner card"
+msgstr "调谐卡"
+
+#: modules/gui/qt4/components/open_panels.cpp:895
+msgid "Delivery system"
+msgstr "传输系统"
+
+#: modules/gui/qt4/components/open_panels.cpp:925
+msgid "Transponder/multiplex frequency"
+msgstr "转发器/多播频率"
+
+#: modules/gui/qt4/components/open_panels.cpp:935
+msgid "Transponder symbol rate"
+msgstr "转发符号率"
+
+#: modules/gui/qt4/components/open_panels.cpp:968
+msgid "Bandwidth"
+msgstr "带宽"
+
+#: modules/gui/qt4/components/open_panels.cpp:1012
+msgid "TV - analog"
+msgstr "TV - 模拟"
+
+#: modules/gui/qt4/components/open_panels.cpp:1015
+msgid "Device name"
+msgstr "设备名称"
+
+#: modules/gui/qt4/components/open_panels.cpp:1075
+msgid "Your display will be opened and played in order to stream or save it."
+msgstr "您计算机上显示的内容将被打开播放以进行流化处理或储存。"
+
+#. xgettext: frames per second
+#: modules/gui/qt4/components/open_panels.cpp:1089
+msgid " f/s"
+msgstr " 帧/秒"
+
+#: modules/gui/qt4/components/open_panels.cpp:1300
+msgid "Advanced Options"
+msgstr "高级选项"
+
+#: modules/gui/qt4/components/playlist/playlist.cpp:75
+msgid "Double click to get media information"
+msgstr "双击获取媒体信息"
+
+#: modules/gui/qt4/components/playlist/playlist.cpp:115
+msgid "Change playlistview"
+msgstr "更改播放列表视图"
+
+#: modules/gui/qt4/components/playlist/playlist.cpp:125
+msgid "Search the playlist"
+msgstr "搜索播放列表"
+
+#: modules/gui/qt4/components/playlist/selector.cpp:244
+msgid "My Computer"
+msgstr "我的电脑"
+
+#: modules/gui/qt4/components/playlist/selector.cpp:245
+msgid "Devices"
+msgstr "设备"
+
+#: modules/gui/qt4/components/playlist/selector.cpp:246
+msgid "Local Network"
+msgstr "本地网络"
+
+#: modules/gui/qt4/components/playlist/selector.cpp:247
+msgid "Internet"
+msgstr "Internet"
+
+#: modules/gui/qt4/components/playlist/selector.cpp:440
+msgid "Remove this podcast subscription"
+msgstr "移除此播客订阅"
+
+#: modules/gui/qt4/components/playlist/selector.cpp:591
+msgid "Do you really want to unsubscribe from %1?"
+msgstr "确实希望退订 %1?"
+
+#: modules/gui/qt4/components/playlist/sorting.h:64
+#, fuzzy
+msgid "Cover"
+msgstr "混合"
+
+#: modules/gui/qt4/components/playlist/standardpanel.cpp:48
+msgid "Create Directory"
+msgstr "创建目录"
+
+#: modules/gui/qt4/components/playlist/standardpanel.cpp:48
+msgid "Create Folder"
+msgstr "创建文件夹"
+
+#: modules/gui/qt4/components/playlist/standardpanel.cpp:50
+msgid "Enter name for new directory:"
+msgstr "输入新目录名:"
+
+#: modules/gui/qt4/components/playlist/standardpanel.cpp:51
+msgid "Enter name for new folder:"
+msgstr "输入新文件夹的名称:"
+
+#: modules/gui/qt4/components/playlist/standardpanel.cpp:54
+#, fuzzy
+msgid "Rename Directory"
+msgstr "创建目录"
+
+#: modules/gui/qt4/components/playlist/standardpanel.cpp:54
+#, fuzzy
+msgid "Rename Folder"
+msgstr "创建文件夹"
+
+#: modules/gui/qt4/components/playlist/standardpanel.cpp:56
+#, fuzzy
+msgid "Enter a new name for the directory:"
+msgstr "输入新目录名:"
+
+#: modules/gui/qt4/components/playlist/standardpanel.cpp:57
+#, fuzzy
+msgid "Enter a new name for the folder:"
+msgstr "输入新文件夹的名称:"
+
+#: modules/gui/qt4/components/playlist/standardpanel.cpp:242
+msgid "Sort by"
+msgstr "排列按"
+
+#: modules/gui/qt4/components/playlist/standardpanel.cpp:249
+msgid "Ascending"
+msgstr "升序"
+
+#: modules/gui/qt4/components/playlist/standardpanel.cpp:253
+msgid "Descending"
+msgstr "降序"
+
+#: modules/gui/qt4/components/playlist/standardpanel.cpp:261
+msgid "Display size"
+msgstr "显示尺寸"
+
+#: modules/gui/qt4/components/playlist/standardpanel.cpp:262
+msgid "Increase"
+msgstr "增加"
+
+#: modules/gui/qt4/components/playlist/standardpanel.cpp:263
+msgid "Decrease"
+msgstr "减少"
+
+#: modules/gui/qt4/components/playlist/standardpanel.cpp:391
+msgid "Playlist View Mode"
+msgstr "播放列表视图模式"
+
+#: modules/gui/qt4/components/playlist/standardpanel.cpp:560
+msgid ""
+"Playlist is currently empty.\n"
+"Drop a file here or select a media source from the left."
+msgstr ""
+"播放列表目前为空。\n"
+"请将文件拖到此处，或从左侧选择媒体源。"
+
+#: modules/gui/qt4/components/playlist/standardpanel.hpp:146
+msgid "Icons"
+msgstr "图标"
+
+#: modules/gui/qt4/components/playlist/standardpanel.hpp:147
+msgid "Detailed List"
+msgstr "详细列表"
+
+#: modules/gui/qt4/components/playlist/standardpanel.hpp:148
+msgid "List"
+msgstr "列表"
+
+#: modules/gui/qt4/components/playlist/standardpanel.hpp:149
+msgid "PictureFlow"
+msgstr "图片流"
+
+#: modules/gui/qt4/components/preferences_widgets.cpp:305
+msgid "Select File"
+msgstr "选择文件"
+
+#: modules/gui/qt4/components/preferences_widgets.cpp:1132
+msgid ""
+"Select or double click an action to change the associated hotkey. Use delete "
+"key to remove hotkeys"
+msgstr "选择或双击某一动作可更改关联的热键。使用删除键移除热键"
+
+#: modules/gui/qt4/components/preferences_widgets.cpp:1139
+msgid "in"
+msgstr "范围"
+
+#: modules/gui/qt4/components/preferences_widgets.cpp:1141
+msgid "Any field"
+msgstr "任意字段"
+
+#: modules/gui/qt4/components/preferences_widgets.cpp:1142
+msgid "Actions"
+msgstr "动作"
+
+#: modules/gui/qt4/components/preferences_widgets.cpp:1149
+msgid "Hotkey"
+msgstr "热键"
+
+#: modules/gui/qt4/components/preferences_widgets.cpp:1150
+msgid "Application level hotkey"
+msgstr "应用程序级别热键"
+
+#: modules/gui/qt4/components/preferences_widgets.cpp:1151
+#: modules/gui/qt4/components/preferences_widgets.cpp:1411
+msgid "Global"
+msgstr "全局"
+
+#: modules/gui/qt4/components/preferences_widgets.cpp:1152
+msgid "Desktop level hotkey"
+msgstr "桌面级别热键"
+
+#: modules/gui/qt4/components/preferences_widgets.cpp:1235
+#: modules/gui/qt4/components/preferences_widgets.cpp:1236
+msgid ""
+"Double click to change.\n"
+"Delete key to remove."
+msgstr ""
+"双击可更改。\n"
+"按删除键移除。"
+
+#: modules/gui/qt4/components/preferences_widgets.cpp:1412
+msgid "Hotkey change"
+msgstr "热键更改"
+
+#: modules/gui/qt4/components/preferences_widgets.cpp:1416
+msgid "Press the new key or combination for "
+msgstr "请按下该动作的新热键或组合键 "
+
+#: modules/gui/qt4/components/preferences_widgets.cpp:1425
+msgid "Assign"
+msgstr "指派"
+
+#: modules/gui/qt4/components/preferences_widgets.cpp:1460
+msgid "Warning: this key or combination is already assigned to "
+msgstr "警告: 该热键或组合键已分配给"
+
+#: modules/gui/qt4/components/preferences_widgets.cpp:1472
+msgid "Warning: <b>%1</b> is already an application menu shortcut"
+msgstr "警告: <b>%1</b> 已被应用程序菜单快捷键占用"
+
+#: modules/gui/qt4/components/preferences_widgets.cpp:1495
+msgid "Key or combination: "
+msgstr "快捷键或组合键: "
+
+#: modules/gui/qt4/components/preferences_widgets.cpp:1504
+msgid "Key: "
+msgstr "按键:"
+
+#: modules/gui/qt4/components/simple_preferences.cpp:278
+#: modules/gui/qt4/components/simple_preferences.cpp:615
+msgid "Input & Codecs Settings"
+msgstr "输入和编解码器设置"
+
+#: modules/gui/qt4/components/simple_preferences.cpp:280
+#: modules/gui/qt4/components/simple_preferences.cpp:896
+msgid "Configure Hotkeys"
+msgstr "设置热键"
+
+#: modules/gui/qt4/components/simple_preferences.cpp:455
+msgid "Device:"
+msgstr "设备:"
+
+#: modules/gui/qt4/components/simple_preferences.cpp:620
+msgid ""
+"If this property is blank, different values\n"
+"for DVD, VCD, and CDDA are set.\n"
+"You can define a unique one or configure them \n"
+"individually in the advanced preferences."
+msgstr ""
+"如果此属性为空，\n"
+"将为 DVD、VCD 和 CDDA 设置不同的值。\n"
+"您可以在高级参数设置中定义个唯一的或单独的设置它们。"
+
+#: modules/gui/qt4/components/simple_preferences.cpp:739
+msgid "This is VLC's skinnable interface. You can download other skins at"
+msgstr "这是 VLC 的外观界面。您可以在此下载外观："
+
+#: modules/gui/qt4/components/simple_preferences.cpp:741
+msgid "VLC skins website"
+msgstr "VLC 外观网站"
+
+#: modules/gui/qt4/components/simple_preferences.cpp:765
+msgid "System's default"
+msgstr "系统默认"
+
+#: modules/gui/qt4/components/simple_preferences.cpp:1264
+msgid "File associations"
+msgstr "文件关联"
+
+#: modules/gui/qt4/components/simple_preferences.cpp:1273
+#: modules/gui/qt4/dialogs_provider.hpp:42
+msgid "Audio Files"
+msgstr "音频文件"
+
+#: modules/gui/qt4/components/simple_preferences.cpp:1274
+#: modules/gui/qt4/dialogs_provider.hpp:41
+msgid "Video Files"
+msgstr "视频文件"
+
+#: modules/gui/qt4/components/simple_preferences.cpp:1275
+#: modules/gui/qt4/dialogs_provider.hpp:43
+msgid "Playlist Files"
+msgstr "播放列表文件"
+
+#: modules/gui/qt4/components/simple_preferences.cpp:1327
+msgid "&Apply"
+msgstr "应用(&A)"
+
+#: modules/gui/qt4/components/simple_preferences.cpp:1328
+#: modules/gui/qt4/dialogs/convert.cpp:109
+#: modules/gui/qt4/dialogs/gototime.cpp:49
+#: modules/gui/qt4/dialogs/open.cpp:108 modules/gui/qt4/dialogs/openurl.cpp:61
+#: modules/gui/qt4/dialogs/podcast_configuration.cpp:37
+#: modules/gui/qt4/dialogs/preferences.cpp:94
+#: modules/gui/qt4/dialogs/toolbar.cpp:196
+msgid "&Cancel"
+msgstr "取消(&C)"
+
+#: modules/gui/qt4/components/sout/profile_selector.cpp:52
+msgid "Profile"
+msgstr "配置文件"
+
+#: modules/gui/qt4/components/sout/profile_selector.cpp:60
+msgid "Edit selected profile"
+msgstr "编辑选中的配置文件"
+
+#: modules/gui/qt4/components/sout/profile_selector.cpp:65
+msgid "Delete selected profile"
+msgstr "删除选中的配置文件"
+
+#: modules/gui/qt4/components/sout/profile_selector.cpp:70
+msgid "Create a new profile"
+msgstr "创建新的配置文件"
+
+#: modules/gui/qt4/components/sout/profile_selector.cpp:424
+#: modules/gui/qt4/dialogs/bookmarks.cpp:47
+msgid "Create"
+msgstr "创建"
+
+#: modules/gui/qt4/components/sout/profile_selector.cpp:604
+msgid "This muxer is not provided directly by VLC: It could be missing."
+msgstr "该混流器并非由 VLC 直接提供: 可能已经丢失。"
+
+#: modules/gui/qt4/components/sout/profile_selector.cpp:748
+msgid " Profile Name Missing"
+msgstr "配置文件名称缺失"
+
+#: modules/gui/qt4/components/sout/profile_selector.cpp:749
+msgid "You must set a name for the profile."
+msgstr "您必须为配置文件设定一个名称。"
+
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:40
+msgid "File/Directory"
+msgstr "文件/目录"
+
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:40
+msgid "File/Folder"
+msgstr "文件/文件夹"
+
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:47
+#: modules/gui/qt4/ui/sout.h:203
+msgid "Source"
+msgstr "来源"
+
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:50
+msgid "Source:"
+msgstr "来源:"
+
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:59
+msgid "Type:"
+msgstr "类型:"
+
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:103
+msgid "This module writes the transcoded stream to a file."
+msgstr "此模块把转码后的串流写入一个文件中。"
+
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:105
+msgid "Filename"
+msgstr "文件名"
+
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:148
+#: modules/gui/qt4/dialogs/convert.cpp:133
+msgid "Save file..."
+msgstr "保存文件..."
+
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:149
+msgid ""
+"Containers (*.ps *.ts *.mpg *.ogg *.asf *.mp4 *.mov *.wav *.raw *.flv *.webm)"
+msgstr ""
+"容器 (*.ps *.ts *.mpg *.ogg *.asf *.mp4 *.mov *.wav *.raw *.flv *.webm)"
+
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:158
+msgid "This module outputs the transcoded stream to a network via HTTP."
+msgstr "此模块可将一个转码后的串流通过 HTTP 协议输出到网络中。"
+
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:160
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:256
+msgid "Path"
+msgstr "路径"
+
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:212
+msgid ""
+"This module outputs the transcoded stream to a network via the mms protocol."
+msgstr "此模块通过 mms 协议向网络输出转码后的流。"
+
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:254
+msgid "This module outputs the transcoded stream to a network via RTSP."
+msgstr "此模块可将一个转码后的串流通过 RTSP 协议输出到网络中。"
+
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:300
+msgid "This module outputs the transcoded stream to a network via UDP."
+msgstr "此模块可将一个转码后的串流通过 UDP 协议输出到网络中。"
+
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:342
+msgid "This module outputs the transcoded stream to a network via RTP."
+msgstr "此模块可将一个转码后的串流通过 RTP 协议输出到网络中。"
+
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:349
+msgid "Base port"
+msgstr "基本端口"
+
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:397
+msgid "This module outputs the transcoded stream to an Icecast server."
+msgstr "此模块向 Icecast 服务器输出转码生成的流。"
+
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:416
+msgid "Mount Point"
+msgstr "安装点"
+
+#: modules/gui/qt4/components/sout/sout_widgets.cpp:417
+msgid "Login:pass"
+msgstr "登录:密码"
+
+#: modules/gui/qt4/dialogs/bookmarks.cpp:41
+msgid "Edit Bookmarks"
+msgstr "编辑书签"
+
+#: modules/gui/qt4/dialogs/bookmarks.cpp:48
+msgid "Create a new bookmark"
+msgstr "创建一个新书签"
+
+#: modules/gui/qt4/dialogs/bookmarks.cpp:51
+msgid "Delete the selected item"
+msgstr "删除选定的项目"
+
+#: modules/gui/qt4/dialogs/bookmarks.cpp:54
+msgid "Delete all the bookmarks"
+msgstr "删除所有书签"
+
+#: modules/gui/qt4/dialogs/bookmarks.cpp:62
+#: modules/gui/qt4/dialogs/errors.cpp:49
+#: modules/gui/qt4/dialogs/extended.cpp:110
+#: modules/gui/qt4/dialogs/help.cpp:66 modules/gui/qt4/dialogs/help.cpp:212
+#: modules/gui/qt4/dialogs/mediainfo.cpp:79
+#: modules/gui/qt4/dialogs/messages.cpp:81
+#: modules/gui/qt4/dialogs/plugins.cpp:88
+#: modules/gui/qt4/dialogs/plugins.cpp:1400
+#: modules/gui/qt4/dialogs/plugins.cpp:1513
+#: modules/gui/qt4/dialogs/podcast_configuration.cpp:36
+#: modules/gui/qt4/dialogs/vlm.cpp:136 modules/gui/qt4/dialogs/epg.cpp:88
+msgid "&Close"
+msgstr "关闭(&C)"
+
+#: modules/gui/qt4/dialogs/bookmarks.cpp:76
+msgid "Bytes"
+msgstr "字节"
+
+#: modules/gui/qt4/dialogs/convert.cpp:44
+#: modules/gui/qt4/dialogs/convert.cpp:78
+msgid "Convert"
+msgstr "转换"
+
+#: modules/gui/qt4/dialogs/convert.cpp:58
+#: modules/gui/qt4/ui/sprefs_audio.h:433
+msgid "Destination file:"
+msgstr "目标文件:"
+
+#: modules/gui/qt4/dialogs/convert.cpp:66
+msgid "Browse"
+msgstr "浏览 "
+
+#: modules/gui/qt4/dialogs/convert.cpp:75
+msgid "Settings"
+msgstr "设置"
+
+#: modules/gui/qt4/dialogs/convert.cpp:90
+msgid "Display the output"
+msgstr "显示输出"
+
+#: modules/gui/qt4/dialogs/convert.cpp:91
+msgid "This display the resulting media, but can slow things down."
+msgstr "这将显示生成的媒体，但可能会减慢速度。"
+
+#: modules/gui/qt4/dialogs/convert.cpp:108
+msgid "&Start"
+msgstr "开始(&S)"
+
+#: modules/gui/qt4/dialogs/convert.cpp:135
+#, fuzzy
+msgid "Containers"
+msgstr "容器 (*"
+
+#: modules/gui/qt4/dialogs/errors.cpp:40
+msgid "Errors"
+msgstr "错误"
+
+#: modules/gui/qt4/dialogs/errors.cpp:47
+msgid "Cl&ear"
+msgstr "清除(&E)"
+
+#: modules/gui/qt4/dialogs/errors.cpp:54
+msgid "Hide future errors"
+msgstr "隐藏功能错误"
+
+#: modules/gui/qt4/dialogs/extended.cpp:49
+msgid "Adjustments and Effects"
+msgstr "调节与效果"
+
+#: modules/gui/qt4/dialogs/extended.cpp:87
+msgid "Synchronization"
+msgstr "同步"
+
+#: modules/gui/qt4/dialogs/extended.cpp:92
+msgid "v4l2 controls"
+msgstr "v4l2 控制"
+
+#: modules/gui/qt4/dialogs/extended.cpp:101
+msgid "&Write changes to config"
+msgstr "将变更写入至配置文件(&W)"
+
+#: modules/gui/qt4/dialogs/firstrun.cpp:61
+#: modules/gui/qt4/dialogs/firstrun.cpp:69
+msgid "Privacy and Network Access Policy"
+msgstr "隐私与网络访问策略"
+
+#: modules/gui/qt4/dialogs/firstrun.cpp:72
+#, fuzzy
+msgid ""
+"<p>In order to protect your privacy, <i>VLC media player</i> does <b>not</b> "
+"collect personal data or transmit them, not even in anonymized form, to "
+"anyone.</p>\n"
+"<p>Nevertheless, <i>VLC</i> is able to automatically retrieve information "
+"about the media in your playlist from third party Internet-based services. "
+"This includes cover art, track names, artist names and other meta-data.</p>\n"
+"<p>Consequently, this may entail identifying some of your media files to "
+"third party entities. Therefore the <i>VLC</i> developers require your "
+"express consent for the media player to access the Internet automatically.</"
+"p>\n"
+msgstr ""
+"<p>为保护您的隐私，<i>VLC media player</i> <b>不会</b> 收集或将个人数据（即使"
+"以匿名形式）传输给任何人。</p>\n"
+"<p>不过，<i>VLC</i> 提供了从第三方互联网服务自动检索关于播放列表中媒体的信息"
+"的功能。这些信息包括专辑封面、音轨名称、创作者等元数据。</p>\n"
+"开启该功能意味着第三方机构将能识别出您的部分媒体文件。因此 <i>VLC</i> 开发团"
+"队要求您决定是否允许媒体播放器自动访问互联网。</p>\n"
+
+#: modules/gui/qt4/dialogs/firstrun.cpp:91
+msgid "Network Access Policy"
+msgstr "网络访问策略"
+
+#: modules/gui/qt4/dialogs/firstrun.cpp:103
+msgid "Regularly check for VLC updates"
+msgstr "定期检查 VLC 的更新版本"
+
+#: modules/gui/qt4/dialogs/gototime.cpp:42
+msgid "Go to Time"
+msgstr "转到时间"
+
+#: modules/gui/qt4/dialogs/gototime.cpp:48
+msgid "&Go"
+msgstr "转到(&G)"
+
+#: modules/gui/qt4/dialogs/gototime.cpp:56
+msgid "Go to time"
+msgstr "转到时间"
+
+#: modules/gui/qt4/dialogs/help.cpp:86
+#: modules/gui/qt4/dialogs/plugins.cpp:1338
+#: modules/gui/qt4/dialogs/plugins.cpp:1421
+msgid "About"
+msgstr "关于"
+
+#: modules/gui/qt4/dialogs/help.cpp:214
+msgid "&Recheck version"
+msgstr "重新检查版本(&R)"
+
+#: modules/gui/qt4/dialogs/help.cpp:217
+msgid "&Yes"
+msgstr "是(&Y)"
+
+#: modules/gui/qt4/dialogs/help.cpp:219
+msgid "&No"
+msgstr "否(&N)"
+
+#: modules/gui/qt4/dialogs/help.cpp:222 modules/gui/qt4/ui/update.h:148
+msgid "VLC media player updates"
+msgstr "VLC media player 更新"
+
+#: modules/gui/qt4/dialogs/help.cpp:294
+msgid "A new version of VLC (%1.%2.%3%4) is available."
+msgstr "有新版 VLC (%1.%2.%3%4) 可用。"
+
+#: modules/gui/qt4/dialogs/help.cpp:319
+msgid "You have the latest version of VLC media player."
+msgstr "您已拥有最新版本的 VLC media player。"
+
+#: modules/gui/qt4/dialogs/help.cpp:326
+msgid "An error occurred while checking for updates..."
+msgstr "在检测更新时发生了一个错误..."
+
+#: modules/gui/qt4/dialogs/mediainfo.cpp:52
+msgid "Current Media Information"
+msgstr "当前媒体信息"
+
+#: modules/gui/qt4/dialogs/mediainfo.cpp:63
+msgid "&General"
+msgstr "常规(&G)"
+
+#: modules/gui/qt4/dialogs/mediainfo.cpp:65
+msgid "&Metadata"
+msgstr "元数据(&M)"
+
+#: modules/gui/qt4/dialogs/mediainfo.cpp:67
+msgid "Co&dec"
+msgstr "编解码器(&D)"
+
+#: modules/gui/qt4/dialogs/mediainfo.cpp:71
+msgid "S&tatistics"
+msgstr "统计(&T)"
+
+#: modules/gui/qt4/dialogs/mediainfo.cpp:77
+msgid "&Save Metadata"
+msgstr "保存元数据(&S)"
+
+#: modules/gui/qt4/dialogs/mediainfo.cpp:82
+msgid "Location:"
+msgstr "位置:"
+
+#: modules/gui/qt4/dialogs/messages.cpp:77
+#: modules/gui/qt4/ui/messages_panel.h:139
+#: modules/gui/qt4/ui/messages_panel.h:143
+#: modules/gui/macosx/DebugMessageVisualizer.m:92
+msgid "Messages"
+msgstr "消息"
+
+#: modules/gui/qt4/dialogs/messages.cpp:88
+msgid "Saves all the displayed logs to a file"
+msgstr "保存所有已显示的日志到一个文件"
+
+#: modules/gui/qt4/dialogs/messages.cpp:256
+msgid "Save log file as..."
+msgstr "日志文件另存为..."
+
+#: modules/gui/qt4/dialogs/messages.cpp:258
+msgid "Texts / Logs (*.log *.txt);; All (*.*) "
+msgstr "文本 / 日志 (*.log *.txt);; 所有 (*.*) "
+
+#: modules/gui/qt4/dialogs/messages.cpp:265
+msgid ""
+"Cannot write to file %1:\n"
+"%2."
+msgstr ""
+"无法写入文件 %1:\n"
+"%2。"
+
+#: modules/gui/qt4/dialogs/messages.cpp:331
+msgid "Update the tree"
+msgstr "更新树"
+
+#: modules/gui/qt4/dialogs/messages.cpp:332
+msgid "Clear the messages"
+msgstr "清除消息"
+
+#: modules/gui/qt4/dialogs/open.cpp:78 modules/gui/qt4/menus.cpp:922
+msgid "Open Media"
+msgstr "打开媒体"
+
+#: modules/gui/qt4/dialogs/open.cpp:90
+msgid "&File"
+msgstr "文件(&F)"
+
+#: modules/gui/qt4/dialogs/open.cpp:92
+msgid "&Disc"
+msgstr "光盘(&D)"
+
+#: modules/gui/qt4/dialogs/open.cpp:94
+msgid "&Network"
+msgstr "网络(&N)"
+
+#: modules/gui/qt4/dialogs/open.cpp:96
+msgid "Capture &Device"
+msgstr "捕获设备(&D)"
+
+#: modules/gui/qt4/dialogs/open.cpp:111
+msgid "&Select"
+msgstr "选择(&S)"
+
+#: modules/gui/qt4/dialogs/open.cpp:115 modules/gui/qt4/dialogs/open.cpp:208
+#: modules/gui/qt4/dialogs/openurl.cpp:58
+msgid "&Enqueue"
+msgstr "加入队列(&E)"
+
+#: modules/gui/qt4/dialogs/open.cpp:117 modules/gui/qt4/dialogs/open.cpp:212
+#: modules/gui/qt4/dialogs/openurl.cpp:55 modules/gui/qt4/menus.cpp:811
+msgid "&Play"
+msgstr "播放(&P)"
+
+#: modules/gui/qt4/dialogs/open.cpp:119 modules/gui/qt4/dialogs/open.cpp:202
+msgid "&Stream"
+msgstr "串流(&S)"
+
+#: modules/gui/qt4/dialogs/open.cpp:121
+msgid "C&onvert"
+msgstr "转换(&O)"
+
+#: modules/gui/qt4/dialogs/open.cpp:205
+msgid "C&onvert / Save"
+msgstr "转换(&O) / 保存"
+
+#: modules/gui/qt4/dialogs/openurl.cpp:48
+msgid "Open URL"
+msgstr "打开 URL"
+
+#: modules/gui/qt4/dialogs/openurl.cpp:65
+msgid "Enter URL here..."
+msgstr "在此处输入 URL..."
+
+#: modules/gui/qt4/dialogs/openurl.cpp:68
+msgid "Please enter the URL or path to the media you want to play."
+msgstr "请输入您希望播放的媒体 URL 或路径。"
+
+#: modules/gui/qt4/dialogs/openurl.cpp:72
+msgid ""
+"If your clipboard contains a valid URL\n"
+"or the path to a file on your computer,\n"
+"it will be automatically selected."
+msgstr ""
+"如果您的剪贴板包含有效的 URL\n"
+"或计算机中的文件路径，\n"
+"它将被自动选中。"
+
+#: modules/gui/qt4/dialogs/plugins.cpp:74
+msgid "Plugins and extensions"
+msgstr "插件及扩展"
+
+#: modules/gui/qt4/dialogs/plugins.cpp:82
+#, fuzzy
+msgid "Active Extensions"
+msgstr "活动区域"
+
+#: modules/gui/qt4/dialogs/plugins.cpp:123
+msgid "Capability"
+msgstr "能力"
+
+#: modules/gui/qt4/dialogs/plugins.cpp:123
+msgid "Score"
+msgstr "分数"
+
+#: modules/gui/qt4/dialogs/plugins.cpp:136
+msgid "&Search:"
+msgstr "搜索(&S):"
+
+#: modules/gui/qt4/dialogs/plugins.cpp:247
+#: modules/gui/qt4/dialogs/plugins.cpp:1254
+msgid "More information..."
+msgstr "更多信息..."
+
+#: modules/gui/qt4/dialogs/plugins.cpp:255
+msgid "Reload extensions"
+msgstr "重新载入扩展"
+
+#: modules/gui/qt4/dialogs/plugins.cpp:375
+msgid ""
+"Skins customize player's appearance. You can activate them through "
+"preferences."
+msgstr ""
+
+#: modules/gui/qt4/dialogs/plugins.cpp:379
+msgid ""
+"Playlist parsers add new capabilities to read internet streams or extract "
+"meta data."
+msgstr ""
+
+#: modules/gui/qt4/dialogs/plugins.cpp:383
+msgid ""
+"Service discoveries adds new sources to your playlist such as web radios, "
+"video websites, ..."
+msgstr ""
+
+#: modules/gui/qt4/dialogs/plugins.cpp:387
+msgid ""
+"Extensions brings various enhancements. Check descriptions for more details"
+msgstr ""
+
+#: modules/gui/qt4/dialogs/plugins.cpp:408
+msgid "Only installed"
+msgstr ""
+
+#: modules/gui/qt4/dialogs/plugins.cpp:503
+#, fuzzy
+msgid "Retrieving addons..."
+msgstr "正在检索频道信息..."
+
+#: modules/gui/qt4/dialogs/plugins.cpp:514
+#, fuzzy
+msgid "No addons found"
+msgstr "找不到输入"
+
+#: modules/gui/qt4/dialogs/plugins.cpp:793
+msgid "This addon has been installed manually. VLC can't manage it by itself."
+msgstr ""
+
+#: modules/gui/qt4/dialogs/plugins.cpp:1168
+#, fuzzy
+msgid "Version %1"
+msgstr "版本"
+
+#: modules/gui/qt4/dialogs/plugins.cpp:1194
+msgid "%1 downloads"
+msgstr ""
+
+#: modules/gui/qt4/dialogs/plugins.cpp:1263
+#, fuzzy
+msgid "&Uninstall"
+msgstr "安装"
+
+#: modules/gui/qt4/dialogs/plugins.cpp:1266
+#, fuzzy
+msgid "&Install"
+msgstr "安装"
+
+#: modules/gui/qt4/dialogs/plugins.cpp:1361
+#: modules/gui/qt4/dialogs/plugins.cpp:1464
+msgid "Version"
+msgstr "版本"
+
+#: modules/gui/qt4/dialogs/plugins.cpp:1381
+#: modules/gui/qt4/dialogs/plugins.cpp:1491
+msgid "Website"
+msgstr "网站"
+
+#: modules/gui/qt4/dialogs/plugins.cpp:1503
+#: modules/gui/qt4/ui/sprefs_input.h:355
+msgid "Files"
+msgstr "文件"
+
+#: modules/gui/qt4/dialogs/podcast_configuration.cpp:35
+msgid "Deletes the selected item"
+msgstr "删除选定的项目"
+
+#: modules/gui/qt4/dialogs/preferences.cpp:70
+msgid "Show settings"
+msgstr "显示设置"
+
+#: modules/gui/qt4/dialogs/preferences.cpp:74
+msgid "Simple"
+msgstr "简易"
+
+#: modules/gui/qt4/dialogs/preferences.cpp:75
+msgid "Switch to simple preferences view"
+msgstr "切换至简易首选项视图"
+
+#: modules/gui/qt4/dialogs/preferences.cpp:78
+msgid "Switch to full preferences view"
+msgstr "切换至完整首选项视图"
+
+#: modules/gui/qt4/dialogs/preferences.cpp:92
+msgid "&Save"
+msgstr "保存(&S)"
+
+#: modules/gui/qt4/dialogs/preferences.cpp:93
+msgid "Save and close the dialog"
+msgstr "保存并关闭对话框"
+
+#: modules/gui/qt4/dialogs/preferences.cpp:95
+msgid "&Reset Preferences"
+msgstr "重置参数(&R)"
+
+#: modules/gui/qt4/dialogs/preferences.cpp:159
+msgid "Only show current"
+msgstr "仅显示当前"
+
+#: modules/gui/qt4/dialogs/preferences.cpp:161
+msgid "Only show modules related to current playback"
+msgstr "仅显示与当前回放相关的模块"
+
+#: modules/gui/qt4/dialogs/preferences.cpp:197
+msgid "Advanced Preferences"
+msgstr "高级偏好设置"
+
+#: modules/gui/qt4/dialogs/preferences.cpp:218
+msgid "Simple Preferences"
+msgstr "简单偏好设置"
+
+#: modules/gui/qt4/dialogs/preferences.cpp:302
+msgid "Cannot save Configuration"
+msgstr "无法保存配置"
+
+#: modules/gui/qt4/dialogs/preferences.cpp:303
+msgid "Preferences file could not be saved"
+msgstr "首选项文件无法保存"
+
+#: modules/gui/qt4/dialogs/preferences.cpp:328
+msgid "Are you sure you want to reset your VLC media player preferences?"
+msgstr "您是否确定要复位 VLC media player 的首选项?"
+
+#: modules/gui/qt4/dialogs_provider.cpp:65
+msgid "Open Directory"
+msgstr "打开目录"
+
+#: modules/gui/qt4/dialogs_provider.cpp:66
+msgid "Open Folder"
+msgstr "打开文件夹"
+
+#: modules/gui/qt4/dialogs_provider.cpp:544
+msgid "Open playlist..."
+msgstr "打开播放列表..."
+
+#: modules/gui/qt4/dialogs_provider.cpp:560
+msgid "XSPF playlist"
+msgstr "XSPF 播放列表"
+
+#: modules/gui/qt4/dialogs_provider.cpp:561
+msgid "M3U playlist"
+msgstr "M3U 播放列表"
+
+#: modules/gui/qt4/dialogs_provider.cpp:562
+msgid "M3U8 playlist"
+msgstr "M3U8 播放列表"
+
+#: modules/gui/qt4/dialogs_provider.cpp:580
+msgid "Save playlist as..."
+msgstr "播放列表另存为..."
+
+#: modules/gui/qt4/dialogs_provider.cpp:725
+msgid "Open subtitles..."
+msgstr "打开字幕..."
+
+#: modules/gui/qt4/dialogs_provider.hpp:40
+msgid "Media Files"
+msgstr "媒体文件"
+
+#: modules/gui/qt4/dialogs_provider.hpp:44
+msgid "Subtitle Files"
+msgstr "字幕文件"
+
+#: modules/gui/qt4/dialogs_provider.hpp:45
+msgid "All Files"
+msgstr "所有文件"
+
+#: modules/gui/qt4/dialogs/sout.cpp:45 modules/gui/qt4/ui/sout.h:202
+msgid "Stream Output"
+msgstr "流输出"
+
+#: modules/gui/qt4/dialogs/sout.cpp:51
+msgid ""
+"This wizard will allow you to stream or convert your media for use locally, "
+"on your private network, or on the Internet.\n"
+"You should start by checking that source matches what you want your input to "
+"be and then press the \"Next\" button to continue.\n"
+msgstr ""
+"此想到将允许您流化或转换媒体，以供在本地、私有网络或 Internet 上使用。\n"
+"要开始，请先检查源是否与您所希望的输入相符，然后按“下一步”按钮继续。\n"
+
+#: modules/gui/qt4/dialogs/sout.cpp:58
+msgid ""
+"Stream output string.\n"
+"This is automatically generated when you change the above settings,\n"
+"but you can change it manually."
+msgstr ""
+"串流输出字串。\n"
+"在您更改上述值之前它是自动生成的，但是您也可以手动更改它。"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:63
+msgid "Toolbars Editor"
+msgstr "工具栏编辑器"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:70
+msgid "Toolbar Elements"
+msgstr "工具栏元素"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:75
+msgid "Flat Button"
+msgstr "平滑按钮"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:76
+#, fuzzy
+msgid "Next widget style"
+msgstr "下一个控件风格:"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:77
+msgid "Big Button"
+msgstr "大按钮"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:79
+msgid "Native Slider"
+msgstr "原生滚动条"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:93
+msgid "Main Toolbar"
+msgstr "主工具栏"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:96
+msgid "Above the Video"
+msgstr "在视频上面"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:99
+msgid "Toolbar position:"
+msgstr "工具栏位置:"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:105
+msgid "Line 1:"
+msgstr "第一行:"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:110
+msgid "Line 2:"
+msgstr "第二行:"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:119
+msgid "Time Toolbar"
+msgstr "时间工具条"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:128
+#, fuzzy
+msgid "Advanced Widget"
+msgstr "高级控件工具条:"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:137
+msgid "Fullscreen Controller"
+msgstr "全屏幕控制器"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:146
+msgid "New profile"
+msgstr "新建配置文件"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:149
+msgid "Delete the current profile"
+msgstr "删除当前配置文件"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:151
+msgid "Select profile:"
+msgstr "选择配置文件:"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:185
+#, fuzzy
+msgid "Preview"
+msgstr "上一个"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:194
+msgid "Cl&ose"
+msgstr "关闭(&O)"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:224 modules/gui/qt4/ui/profiles.h:750
+msgid "Profile Name"
+msgstr "配置文件名称"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:225
+msgid "Please enter the new profile name."
+msgstr "请为新配置文件输入一个名称。"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:394
+msgid "Spacer"
+msgstr "占位符"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:401
+msgid "Expanding Spacer"
+msgstr "扩展占位符"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:433
+msgid "Splitter"
+msgstr "分隔符"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:440
+msgid "Time Slider"
+msgstr "时间轴"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:453
+msgid "Small Volume"
+msgstr "小音量"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:490
+msgid "DVD menus"
+msgstr "DVD 菜单"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:519
+msgid "Advanced Buttons"
+msgstr "高级按钮"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:532
+msgid "Playback Buttons"
+msgstr "回放按钮"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:536
+msgid "Aspect ratio selector"
+msgstr "宽高比选择器"
+
+#: modules/gui/qt4/dialogs/toolbar.cpp:540
+msgid "Speed selector"
+msgstr "速度选择器"
+
+#: modules/gui/qt4/dialogs/vlm.cpp:73
+msgid "Broadcast"
+msgstr "广播"
+
+#: modules/gui/qt4/dialogs/vlm.cpp:74
+msgid "Schedule"
+msgstr "计划"
+
+#: modules/gui/qt4/dialogs/vlm.cpp:75
+msgid "Video On Demand ( VOD )"
+msgstr "视频点播 ( VOD )"
+
+#: modules/gui/qt4/dialogs/vlm.cpp:80
+msgid "Hours / Minutes / Seconds:"
+msgstr "小时 / 分 / 秒:"
+
+#: modules/gui/qt4/dialogs/vlm.cpp:82
+msgid "Day / Month / Year:"
+msgstr "天 / 月 / 年:"
+
+#: modules/gui/qt4/dialogs/vlm.cpp:84
+msgid "Repeat:"
+msgstr "重复:"
+
+#: modules/gui/qt4/dialogs/vlm.cpp:86
+msgid "Repeat delay:"
+msgstr "重复延迟:"
+
+#: modules/gui/qt4/dialogs/vlm.cpp:111
+#: modules/gui/qt4/ui/sprefs_interface.h:530
+msgid " days"
+msgstr " 天"
+
+#: modules/gui/qt4/dialogs/vlm.cpp:130
+msgid "I&mport"
+msgstr "导入(&M)"
+
+#: modules/gui/qt4/dialogs/vlm.cpp:133
+msgid "E&xport"
+msgstr "导出(&X)"
+
+#: modules/gui/qt4/dialogs/vlm.cpp:270
+msgid "Save VLM configuration as..."
+msgstr "将 VLM 配置另存为..."
+
+#: modules/gui/qt4/dialogs/vlm.cpp:272 modules/gui/qt4/dialogs/vlm.cpp:346
+msgid "VLM conf (*.vlm);;All (*)"
+msgstr "VLM 配置 (*.vlm);;所有文件 (*)"
+
+#: modules/gui/qt4/dialogs/vlm.cpp:344
+msgid "Open VLM configuration..."
+msgstr "打开 VLM 配置..."
+
+#: modules/gui/qt4/dialogs/vlm.cpp:544
+msgid "Broadcast: "
+msgstr "广播:"
+
+#: modules/gui/qt4/dialogs/vlm.cpp:617
+msgid "Schedule: "
+msgstr "计划:"
+
+#: modules/gui/qt4/dialogs/vlm.cpp:641
+msgid "VOD: "
+msgstr "VOD: "
+
+#: modules/gui/qt4/input_manager.cpp:136
+msgid "Do you want to restart the playback where left off?"
+msgstr ""
+
+#: modules/gui/qt4/main_interface.cpp:1181
+msgid "Control menu for the player"
+msgstr "用于播放器的控制菜单"
+
+#: modules/gui/qt4/main_interface.cpp:1225
+msgid "Paused"
+msgstr "已暂停"
+
+#: modules/gui/qt4/menus.cpp:333
+msgid "&Media"
+msgstr "媒体(&M)"
+
+#: modules/gui/qt4/menus.cpp:336
+msgid "P&layback"
+msgstr "播放(&L)"
+
+#: modules/gui/qt4/menus.cpp:337 modules/gui/qt4/menus.cpp:1033
+msgid "&Audio"
+msgstr "音频(&A)"
+
+#: modules/gui/qt4/menus.cpp:338 modules/gui/qt4/menus.cpp:1040
+msgid "&Video"
+msgstr "视频(&V)"
+
+#: modules/gui/qt4/menus.cpp:339 modules/gui/qt4/menus.cpp:1047
+msgid "Subti&tle"
+msgstr "字幕(&T)"
+
+#: modules/gui/qt4/menus.cpp:341 modules/gui/qt4/menus.cpp:1063
+msgid "T&ools"
+msgstr "工具(&O)"
+
+#: modules/gui/qt4/menus.cpp:344 modules/gui/qt4/menus.cpp:1098
+msgid "V&iew"
+msgstr "视图(&I)"
+
+#: modules/gui/qt4/menus.cpp:346 modules/gui/qt4/menus.cpp:773
+msgid "&Help"
+msgstr "帮助(&H)"
+
+#: modules/gui/qt4/menus.cpp:359
+msgid "Open &File..."
+msgstr "打开文件(&F)..."
+
+#: modules/gui/qt4/menus.cpp:361
+msgid "&Open Multiple Files..."
+msgstr "打开多个文件(&O)..."
+
+#: modules/gui/qt4/menus.cpp:365 modules/gui/qt4/menus.cpp:927
+msgid "Open &Disc..."
+msgstr "打开光盘(&D)..."
+
+#: modules/gui/qt4/menus.cpp:367
+msgid "Open &Network Stream..."
+msgstr "打开网络串流(&N)..."
+
+#: modules/gui/qt4/menus.cpp:369 modules/gui/qt4/menus.cpp:931
+msgid "Open &Capture Device..."
+msgstr "打开捕获设备(&C)..."
+
+#: modules/gui/qt4/menus.cpp:372
+msgid "Open &Location from clipboard"
+msgstr "从剪贴板打开位置(&L)"
+
+#: modules/gui/qt4/menus.cpp:377
+msgid "Open &Recent Media"
+msgstr "打开最近媒体(&R)"
+
+#: modules/gui/qt4/menus.cpp:387
+msgid "Conve&rt / Save..."
+msgstr "转换 / 保存(&R)..."
+
+#: modules/gui/qt4/menus.cpp:389
+msgid "&Stream..."
+msgstr "流(&S)..."
+
+#: modules/gui/qt4/menus.cpp:394
+msgid "Quit at the end of playlist"
+msgstr "在播放列表末端退出"
+
+#: modules/gui/qt4/menus.cpp:401
+msgid "Close to systray"
+msgstr "关闭到托盘区"
+
+#: modules/gui/qt4/menus.cpp:405 modules/gui/qt4/menus.cpp:1161
+msgid "&Quit"
+msgstr "退出(&Q)"
+
+#: modules/gui/qt4/menus.cpp:415
+msgid "&Effects and Filters"
+msgstr "效果及过滤器(&E)"
+
+#: modules/gui/qt4/menus.cpp:418
+msgid "&Track Synchronization"
+msgstr "轨道同步(&T)"
+
+#: modules/gui/qt4/menus.cpp:431 modules/gui/qt4/dialogs/epg.cpp:46
+msgid "Program Guide"
+msgstr "程序向导"
+
+#: modules/gui/qt4/menus.cpp:437
+msgid "Plu&gins and extensions"
+msgstr "插件及扩展(&G)"
+
+#: modules/gui/qt4/menus.cpp:442
+msgid "Customi&ze Interface..."
+msgstr "自定义界面(&Z)..."
+
+#: modules/gui/qt4/menus.cpp:445
+msgid "&Preferences"
+msgstr "首选项(&P)"
+
+#: modules/gui/qt4/menus.cpp:466
+msgid "&View"
+msgstr "查看(&V)"
+
+#: modules/gui/qt4/menus.cpp:487
+msgid "Play&list"
+msgstr "播放列表(&L)"
+
+#: modules/gui/qt4/menus.cpp:488
+msgid "Ctrl+L"
+msgstr "Ctrl+L"
+
+#: modules/gui/qt4/menus.cpp:491
+msgid "Docked Playlist"
+msgstr "播放列表自动靠边"
+
+#: modules/gui/qt4/menus.cpp:502
+msgid "Mi&nimal Interface"
+msgstr "最小化界面(&N)"
+
+#: modules/gui/qt4/menus.cpp:503
+msgid "Ctrl+H"
+msgstr "Ctrl+H"
+
+#: modules/gui/qt4/menus.cpp:512
+msgid "&Fullscreen Interface"
+msgstr "全屏幕界面(&F)"
+
+#: modules/gui/qt4/menus.cpp:520
+msgid "&Advanced Controls"
+msgstr "高级控制(&A)"
+
+#: modules/gui/qt4/menus.cpp:526
+msgid "Status Bar"
+msgstr "状态栏"
+
+#: modules/gui/qt4/menus.cpp:531
+msgid "Visualizations selector"
+msgstr "可视化选择器"
+
+#: modules/gui/qt4/menus.cpp:589
+msgid "&Increase Volume"
+msgstr "增大音量(&I)"
+
+#: modules/gui/qt4/menus.cpp:592
+msgid "&Decrease Volume"
+msgstr "减小音量(&D)"
+
+#: modules/gui/qt4/menus.cpp:595
+msgid "&Mute"
+msgstr "静音(&M)"
+
+#: modules/gui/qt4/menus.cpp:612
+msgid "Audio &Track"
+msgstr "音轨(&T)"
+
+#: modules/gui/qt4/menus.cpp:613
+msgid "Audio &Device"
+msgstr "音频设备(&D)"
+
+#: modules/gui/qt4/menus.cpp:615
+msgid "&Stereo Mode"
+msgstr "立体声模式(&S)"
+
+#: modules/gui/qt4/menus.cpp:618
+msgid "&Visualizations"
+msgstr "可视化(&V)"
+
+#: modules/gui/qt4/menus.cpp:644
+msgid "Add &Subtitle File..."
+msgstr "添加字幕文件(&S)..."
+
+#: modules/gui/qt4/menus.cpp:646
+msgid "Sub &Track"
+msgstr "子轨道(&T)"
+
+#: modules/gui/qt4/menus.cpp:668
+msgid "Video &Track"
+msgstr "视频轨道(&T)"
+
+#: modules/gui/qt4/menus.cpp:672
+msgid "&Fullscreen"
+msgstr "全屏幕(&F)"
+
+#: modules/gui/qt4/menus.cpp:673
+msgid "Always Fit &Window"
+msgstr "总适应窗口(&Wi)"
+
+#: modules/gui/qt4/menus.cpp:674
+msgid "Always &on Top"
+msgstr "总在最前(&O)"
+
+#: modules/gui/qt4/menus.cpp:675
+msgid "Set as Wall&paper"
+msgstr "设为墙纸(&P)"
+
+#: modules/gui/qt4/menus.cpp:679
+msgid "&Zoom"
+msgstr "缩放(&Z)"
+
+#: modules/gui/qt4/menus.cpp:680
+msgid "&Aspect Ratio"
+msgstr "高宽比(&A)"
+
+#: modules/gui/qt4/menus.cpp:681
+msgid "&Crop"
+msgstr "裁剪(&C)"
+
+#: modules/gui/qt4/menus.cpp:685
+msgid "&Deinterlace"
+msgstr "反交错(&D)"
+
+#: modules/gui/qt4/menus.cpp:686
+msgid "&Deinterlace mode"
+msgstr "反交错模式(&D)"
+
+#: modules/gui/qt4/menus.cpp:687
+msgid "&Post processing"
+msgstr "后期处理(&P)"
+
+#: modules/gui/qt4/menus.cpp:691
+msgid "Take &Snapshot"
+msgstr "截图(&S)"
+
+#: modules/gui/qt4/menus.cpp:710
+msgid "T&itle"
+msgstr "标题(&I)"
+
+#: modules/gui/qt4/menus.cpp:711
+msgid "&Chapter"
+msgstr "章节(&C)"
+
+#: modules/gui/qt4/menus.cpp:713
+msgid "&Program"
+msgstr "程序(&P)"
+
+#: modules/gui/qt4/menus.cpp:717
+msgid "&Manage"
+msgstr "管理(&M)"
+
+#: modules/gui/qt4/menus.cpp:776
+msgid "Check for &Updates..."
+msgstr "检查更新(&U)..."
+
+#: modules/gui/qt4/menus.cpp:825
+msgid "&Stop"
+msgstr "停止(&S)"
+
+#: modules/gui/qt4/menus.cpp:833
+msgid "Pre&vious"
+msgstr "上一个(&V)"
+
+#: modules/gui/qt4/menus.cpp:839
+msgid "Ne&xt"
+msgstr "下一个(&X)"
+
+#: modules/gui/qt4/menus.cpp:857
+msgid "Sp&eed"
+msgstr "速度(&E)"
+
+#: modules/gui/qt4/menus.cpp:863
+msgid "&Faster"
+msgstr "较快(&F)"
+
+#: modules/gui/qt4/menus.cpp:875
+msgid "N&ormal Speed"
+msgstr "普通速度(&O)"
+
+#: modules/gui/qt4/menus.cpp:885
+msgid "Slo&wer"
+msgstr "较慢(&W)"
+
+#: modules/gui/qt4/menus.cpp:900
+msgid "&Jump Forward"
+msgstr "向前跳转(&J)"
+
+#: modules/gui/qt4/menus.cpp:907
+msgid "Jump Bac&kward"
+msgstr "向后跳转(&K)"
+
+#: modules/gui/qt4/menus.cpp:914
+msgid "Ctrl+T"
+msgstr "Ctrl+T"
+
+#: modules/gui/qt4/menus.cpp:929
+msgid "Open &Network..."
+msgstr "打开网络(&N)..."
+
+#: modules/gui/qt4/menus.cpp:1019
+msgid "Leave Fullscreen"
+msgstr "离开全屏幕"
+
+#: modules/gui/qt4/menus.cpp:1053
+msgid "&Playback"
+msgstr "播放(&P)"
+
+#: modules/gui/qt4/menus.cpp:1142
+msgid "&Hide VLC media player in taskbar"
+msgstr "从任务栏隐藏 VLC media player (&H)"
+
+#: modules/gui/qt4/menus.cpp:1148
+msgid "Sho&w VLC media player"
+msgstr "显示 VLC media player (&W)"
+
+#: modules/gui/qt4/menus.cpp:1159
+msgid "&Open Media"
+msgstr "打开媒体(&O)"
+
+#: modules/gui/qt4/menus.cpp:1635
+msgid "&Clear"
+msgstr "清除(&C)"
+
+#: modules/gui/qt4/menus.cpp:1636
+#, fuzzy
+msgid "&Save To Playlist"
+msgstr "保存播放列表"
+
+#: modules/gui/qt4/qt4.cpp:78
+msgid "Show advanced preferences over simple ones"
+msgstr "显示高级参数设置代替简易设置"
+
+#: modules/gui/qt4/qt4.cpp:79
+msgid ""
+"Show advanced preferences and not simple preferences when opening the "
+"preferences dialog."
+msgstr "在打开参数设置对话框时显示高级参数设置而非建议参数设置。"
+
+#: modules/gui/qt4/qt4.cpp:83 modules/gui/skins2/src/skin_main.cpp:471
+msgid "Systray icon"
+msgstr "系统托盘图标"
+
+#: modules/gui/qt4/qt4.cpp:84
+msgid ""
+"Show an icon in the systray allowing you to control VLC media player for "
+"basic actions."
+msgstr "在系统托盘处显示一个图标使您可以对 VLC media player 进行简单的操作。"
+
+#: modules/gui/qt4/qt4.cpp:88
+msgid "Start VLC with only a systray icon"
+msgstr "仅以系统托盘方式启动 VLC"
+
+#: modules/gui/qt4/qt4.cpp:89
+msgid "VLC will start with just an icon in your taskbar"
+msgstr "VLC 启动时将只显示任务栏图标"
+
+#: modules/gui/qt4/qt4.cpp:98
+msgid "Show playing item name in window title"
+msgstr "在窗口标题显示正在播放的项目名称"
+
+#: modules/gui/qt4/qt4.cpp:99
+msgid "Show the name of the song or video in the controller window title."
+msgstr "在控制器窗口标题中显示歌曲或视频的名称。"
+
+#: modules/gui/qt4/qt4.cpp:102
+msgid "Show notification popup on track change"
+msgstr "在轨道更改时显示提示弹出框"
+
+#: modules/gui/qt4/qt4.cpp:104
+msgid ""
+"Show a notification popup with the artist and track name when the current "
+"playlist item changes, when VLC is minimized or hidden."
+msgstr ""
+"在 VLC 被最小化或隐藏时，如果当前的播放列表项目有变动，就显示一个内容为艺术家"
+"和轨道名称的弹出提示窗口。"
+
+#: modules/gui/qt4/qt4.cpp:107
+msgid "Windows opacity between 0.1 and 1"
+msgstr "在 0.1 到 1 之间的窗口不透明度"
+
+#: modules/gui/qt4/qt4.cpp:108
+msgid ""
+"Sets the windows opacity between 0.1 and 1 for main interface, playlist and "
+"extended panel. This option only works with Windows and X11 with composite "
+"extensions."
+msgstr ""
+"为主界面、播放列表和扩展面板设置在 0.1 和 1 之间的窗口透明度。此选项仅工作于 "
+"Windows 和 带混合扩展的 X11。"
+
+#: modules/gui/qt4/qt4.cpp:113
+msgid "Fullscreen controller opacity between 0.1 and 1"
+msgstr "全屏控制板的不透明度，从 0.1 到 1"
+
+#: modules/gui/qt4/qt4.cpp:114
+msgid ""
+"Sets the fullscreen controller opacity between 0.1 and 1 for main interface, "
+"playlist and extended panel. This option only works with Windows and X11 "
+"with composite extensions."
+msgstr ""
+"为主界面、播放列表和扩展面板设置在 0.1 和 1 之间的窗口透明度。此选项仅工作于 "
+"Windows 和带混合扩展的 X11。"
+
+#: modules/gui/qt4/qt4.cpp:120
+msgid "Show unimportant error and warnings dialogs"
+msgstr "显示不重要的错误和警告对话框"
+
+#: modules/gui/qt4/qt4.cpp:122
+msgid "Activate the updates availability notification"
+msgstr "激活可用的更新提示"
+
+#: modules/gui/qt4/qt4.cpp:123
+msgid ""
+"Activate the automatic notification of new versions of the software. It runs "
+"once every two weeks."
+msgstr "激活自动的新版本软件更新提示。它每两星期运行一次。"
+
+#: modules/gui/qt4/qt4.cpp:126
+msgid "Number of days between two update checks"
+msgstr "在两次更新检测之间的间隔天数"
+
+#: modules/gui/qt4/qt4.cpp:128
+msgid "Ask for network policy at start"
+msgstr "在启动时询问网络策略"
+
+#: modules/gui/qt4/qt4.cpp:130
+msgid "Save the recently played items in the menu"
+msgstr "在菜单中保存最近播放的项目"
+
+#: modules/gui/qt4/qt4.cpp:132
+msgid "List of words separated by | to filter"
+msgstr "要过滤的单词列表，以 | 符号分隔"
+
+#: modules/gui/qt4/qt4.cpp:133
+msgid "Regular expression used to filter the recent items played in the player"
+msgstr "用于过滤播放器最近播放过的项目的正则表达式"
+
+#: modules/gui/qt4/qt4.cpp:136
+msgid "Define the colors of the volume slider "
+msgstr "定义音量滑杆的颜色"
+
+#: modules/gui/qt4/qt4.cpp:137
+msgid ""
+"Define the colors of the volume slider\n"
+"By specifying the 12 numbers separated by a ';'\n"
+"Default is '255;255;255;20;226;20;255;176;15;235;30;20'\n"
+"An alternative can be '30;30;50;40;40;100;50;50;160;150;150;255' "
+msgstr ""
+"定义音量滑杆的颜色\n"
+"通过一个由 ';' 分隔的 12 位数字指定\n"
+"默认是 '255;255;255;20;226;20;255;176;15;235;30;20'\n"
+"另一个选择是 '30;30;50;40;40;100;50;50;160;150;150;255'"
+
+#: modules/gui/qt4/qt4.cpp:142
+msgid "Selection of the starting mode and look "
+msgstr "选择启动模式和外观"
+
+#: modules/gui/qt4/qt4.cpp:143
+msgid ""
+"Start VLC with:\n"
+" - normal mode\n"
+" - a zone always present to show information as lyrics, album arts...\n"
+" - minimal mode with limited controls"
+msgstr ""
+"启动 VLC:\n"
+" - 普通模式\n"
+" - 一个总是显示类似歌词信息、专辑封面的区域...\n"
+" - 限制控制的最小化模式"
+
+#: modules/gui/qt4/qt4.cpp:149
+msgid "Show a controller in fullscreen mode"
+msgstr "在全屏模式中显示控制器"
+
+#: modules/gui/qt4/qt4.cpp:150
+msgid "Embed the file browser in open dialog"
+msgstr "在打开对话框中嵌入文件浏览器"
+
+#: modules/gui/qt4/qt4.cpp:152
+msgid "Define which screen fullscreen goes"
+msgstr "定义要切换到全屏幕模式的屏幕"
+
+#: modules/gui/qt4/qt4.cpp:153
+msgid "Screennumber of fullscreen, instead of same screen where interface is"
+msgstr "全屏的屏幕编号，可以不是界面所在的屏幕"
+
+#: modules/gui/qt4/qt4.cpp:156
+msgid "Load extensions on startup"
+msgstr "启动时载入扩展"
+
+#: modules/gui/qt4/qt4.cpp:157
+msgid "Automatically load the extensions module on startup"
+msgstr "自动在启动时载入扩展"
+
+#: modules/gui/qt4/qt4.cpp:160
+msgid "Start in minimal view (without menus)"
+msgstr "以最小外观启动 (无菜单)"
+
+#: modules/gui/qt4/qt4.cpp:162
+msgid "Display background cone or art"
+msgstr "显示背景椎体或专辑封面"
+
+#: modules/gui/qt4/qt4.cpp:163
+msgid ""
+"Display background cone or current album art when not playing. Can be "
+"disabled to prevent burning screen."
+msgstr "不播放时显示背景椎体或当前专辑封面。可以禁用以避免屏幕长亮。"
+
+#: modules/gui/qt4/qt4.cpp:166
+msgid "Expanding background cone or art."
+msgstr "延长背景椎体或专辑封面。"
+
+#: modules/gui/qt4/qt4.cpp:167
+msgid "Background art fits window's size"
+msgstr "背景匹配窗口尺寸"
+
+#: modules/gui/qt4/qt4.cpp:169
+msgid "Ignore keyboard volume buttons."
+msgstr "忽略键盘音量按钮。"
+
+#: modules/gui/qt4/qt4.cpp:171
+msgid ""
+"With this option checked, the volume up, volume down and mute buttons on "
+"your keyboard will always change your system volume. With this option "
+"unchecked, the volume buttons will change VLC's volume when VLC is selected "
+"and change the system volume when VLC is not selected."
+msgstr ""
+"选中本项后，您键盘上的音量增大、减小与静音按钮将总更改您的系统音量。不选中本"
+"项时，若 VLC 为活动窗口，音量按钮将更改 VLC 的音量，否则将更改系统音量。"
+
+#: modules/gui/qt4/qt4.cpp:186
+#, fuzzy
+msgid "Fullscreen controller mouse sensitivity"
+msgstr "全屏幕控制器"
+
+#: modules/gui/qt4/qt4.cpp:192
+msgid "When minimized"
+msgstr "最小化时"
+
+#: modules/gui/qt4/qt4.cpp:197
+msgid "Qt interface"
+msgstr "Qt 界面"
+
+#: modules/gui/qt4/recents.cpp:159
+#, fuzzy
+msgid "Recently Played"
+msgstr "保存最近播放的项目"
+
+#: modules/gui/qt4/util/customwidgets.cpp:80
+msgid "errors"
+msgstr "错误"
+
+#: modules/gui/qt4/util/customwidgets.cpp:81
+msgid "warnings"
+msgstr "警告"
+
+#: modules/gui/qt4/util/customwidgets.cpp:82
+msgid "debug"
+msgstr "调试"
+
+#: modules/gui/skins2/src/dialogs.cpp:206
+msgid "Open a skin file"
+msgstr "打开一个外观文件"
+
+#: modules/gui/skins2/src/dialogs.cpp:207
+msgid "Skin files |*.vlt;*.wsz;*.xml"
+msgstr "外观文件 |*.vlt;*.wsz;*.xml"
+
+#: modules/gui/skins2/src/dialogs.cpp:214
+msgid "Open playlist"
+msgstr "打开播放列表"
+
+#: modules/gui/skins2/src/dialogs.cpp:215
+msgid "Playlist Files|"
+msgstr "播放列表文件|"
+
+#: modules/gui/skins2/src/dialogs.cpp:223
+msgid "Save playlist"
+msgstr "保存播放列表"
+
+#: modules/gui/skins2/src/dialogs.cpp:223
+msgid "XSPF playlist|*.xspf|M3U file|*.m3u|HTML playlist|*.html"
+msgstr "XSPF 播放列表|*.xspf|M3U 文件|*.m3u|HTML 播放列表|*.html"
+
+#: modules/gui/skins2/src/skin_main.cpp:466
+msgid "Skin to use"
+msgstr "要使用的外观"
+
+#: modules/gui/skins2/src/skin_main.cpp:467
+msgid "Path to the skin to use."
+msgstr "要使用外观路径。"
+
+#: modules/gui/skins2/src/skin_main.cpp:468
+msgid "Config of last used skin"
+msgstr "设置最后使用的外观"
+
+#: modules/gui/skins2/src/skin_main.cpp:469
+msgid ""
+"Windows configuration of the last skin used. This option is updated "
+"automatically, do not touch it."
+msgstr "最后使用外观窗口设置，此选项将自动被更新，不要修改它。"
+
+#: modules/gui/skins2/src/skin_main.cpp:472
+msgid "Show a systray icon for VLC"
+msgstr "为 VLC 显示系统托盘图标"
+
+#: modules/gui/skins2/src/skin_main.cpp:473
+#: modules/gui/skins2/src/skin_main.cpp:474
+msgid "Show VLC on the taskbar"
+msgstr "在任务栏上显示 VLC"
+
+#: modules/gui/skins2/src/skin_main.cpp:475
+msgid "Enable transparency effects"
+msgstr "开启透明效果"
+
+#: modules/gui/skins2/src/skin_main.cpp:476
+msgid ""
+"You can disable all transparency effects if you want. This is mainly useful "
+"when moving windows does not behave correctly."
+msgstr ""
+"如果您需要您可以关闭所有的透明效果。这在窗口移动不是很清楚的情况下很有效。"
+
+#: modules/gui/skins2/src/skin_main.cpp:479
+#: modules/gui/skins2/src/skin_main.cpp:480
+msgid "Use a skinned playlist"
+msgstr "使用一个外观化的播放列表"
+
+#: modules/gui/skins2/src/skin_main.cpp:481
+msgid "Display video in a skinned window if any"
+msgstr "如果有外观可用，则在外观化的窗口中显示视频"
+
+#: modules/gui/skins2/src/skin_main.cpp:483
+msgid ""
+"When set to 'no', this parameter is intended to give old skins a chance to "
+"play back video even though no video tag is implemented"
+msgstr ""
+"当设为 '否' 时，此参数意在为旧的外观创造回放视频的条件，即使无可用的视频标签"
+
+#: modules/gui/skins2/src/skin_main.cpp:508
+msgid "Skinnable Interface"
+msgstr "外观化界面"
+
+#: modules/gui/skins2/src/theme_repository.cpp:58
+msgid "Select skin"
+msgstr "选择外观"
+
+#: modules/gui/skins2/src/theme_repository.cpp:116
+msgid "Open skin ..."
+msgstr "打开外观..."
+
+#: modules/hw/vdpau/adjust.c:182
+#, fuzzy
+msgid "VDPAU adjust video filter"
+msgstr "Gradfun 视频滤镜"
+
+#: modules/hw/vdpau/avcodec.c:45
+#, fuzzy
+msgid "VDPAU video decoder"
+msgstr "CDG 视频解码器"
+
+#: modules/hw/vdpau/chroma.c:820
+#, fuzzy
+msgid "Temporal-spatial"
+msgstr "时间"
+
+#: modules/hw/vdpau/chroma.c:824 modules/hw/vdpau/display.c:45
+msgid "VDPAU"
+msgstr ""
+
+#: modules/hw/vdpau/chroma.c:825
+msgid "VDPAU surface conversions"
+msgstr ""
+
+#: modules/hw/vdpau/chroma.c:833
+#, fuzzy
+msgid "Deinterlacing algorithm"
+msgstr "去色带算法"
+
+#: modules/hw/vdpau/chroma.c:836
+#, fuzzy
+msgid "Inverse telecine"
+msgstr "无效的选择"
+
+#: modules/hw/vdpau/chroma.c:838
+#, fuzzy
+msgid "Deinterlace chroma skip"
+msgstr "反交错开启"
+
+#: modules/hw/vdpau/chroma.c:839
+msgid "Whether temporal deinterlacing applies to luma only"
+msgstr ""
+
+#: modules/hw/vdpau/chroma.c:841
+#, fuzzy
+msgid "Noise reduction level"
+msgstr "噪点消除"
+
+#: modules/hw/vdpau/chroma.c:843
+#, fuzzy
+msgid "Scaling quality"
+msgstr "重采样质量"
+
+#: modules/hw/vdpau/chroma.c:843
+#, fuzzy
+msgid "High quality scaling level"
+msgstr "视频质量后处理层级"
+
+#: modules/hw/vdpau/deinterlace.c:131
+#, fuzzy
+msgid "VDPAU deinterlacing filter"
+msgstr "反交错视频滤镜"
+
+#: modules/hw/vdpau/display.c:46
+#, fuzzy
+msgid "VDPAU output"
+msgstr "YUV 输出"
+
+#: modules/hw/vdpau/sharpen.c:141
+#, fuzzy
+msgid "VDPAU sharpen video filter"
+msgstr "锐化视频滤镜"
+
+#: modules/lua/libs/httpd.c:75
+msgid ""
+"<p>Password for Web interface has not been set.</p><p>Please use --http-"
+"password, or set a password in </p><p>Preferences > All > Main "
+"interfaces > Lua > Lua HTTP > Password.</p>"
+msgstr ""
+"<p>Web 界面的密码尚未设置。</p><p>请使用 --http-password 或在 </p><p>偏好设"
+"置 > 全部 > 主界面 > Lua > Lua HTTP > 密码</p> 设置一个密码。"
+
+#: modules/lua/vlc.c:46
+msgid "Lua interface"
+msgstr "Lua 界面"
+
+#: modules/lua/vlc.c:47
+msgid "Lua interface module to load"
+msgstr "要载入的 Lua 界面模块"
+
+#: modules/lua/vlc.c:49
+msgid "Lua interface configuration"
+msgstr "Lua 界面配置"
+
+#: modules/lua/vlc.c:50
+msgid ""
+"Lua interface configuration string. Format is: '[\"<interface module name>"
+"\"] = { <option> = <value>, ...}, ...'."
+msgstr ""
+"Lua 界面配置字串。格式是: '[\"<界面模块名称>\"] = { <选项> = <值"
+">, ...}, ...'。"
+
+#: modules/lua/vlc.c:52 modules/lua/vlc.c:68
+msgid "A single password restricts access to this interface."
+msgstr "限制本界面访问的唯一密码。"
+
+#: modules/lua/vlc.c:54 modules/lua/vlc.c:55
+msgid "Source directory"
+msgstr "源目录"
+
+#: modules/lua/vlc.c:56
+msgid "Directory index"
+msgstr "目录索引"
+
+#: modules/lua/vlc.c:57
+msgid "Allow to build directory index"
+msgstr "允许建立目录索引"
+
+#: modules/lua/vlc.c:59 modules/stream_out/raop.c:147
+#: share/lua/http/dialogs/stream_config_window.html:28
+#: share/lua/http/dialogs/stream_window.html:87
+msgid "Host"
+msgstr "主机"
+
+#: modules/lua/vlc.c:60
+msgid ""
+"This is the host on which the interface will listen. It defaults to all "
+"network interfaces (0.0.0.0). If you want this interface to be available "
+"only on the local machine, enter \"127.0.0.1\"."
+msgstr ""
+"这是界面将要监听的主机。它默认给所有网络界面 (0.0.0.0)。如果您希望界面仅对本"
+"机可用请输入 \"127.0.0.1\"。"
+
+#: modules/lua/vlc.c:65
+msgid ""
+"This is the TCP port on which this interface will listen. It defaults to "
+"4212."
+msgstr "这是此界面将要监听的 TCP 端口。默认为 4212。"
+
+#: modules/lua/vlc.c:73
+msgid "CLI input"
+msgstr "CLI 输入"
+
+#: modules/lua/vlc.c:74
+msgid ""
+"Accept commands from this source. The CLI defaults to stdin (\"*console\"), "
+"but can also bind to a plain TCP socket (\"localhost:4212\") or use the "
+"telnet protocol (\"telnet://0.0.0.0:4212\")"
+msgstr ""
+"从此来源接收命令。CLI 默认为 stdin (\"*console\")，但也可以与纯 TCP socket 绑"
+"定 (\"localhost:4212\") 或使用 telnet 协议 (\"telnet://0.0.0.0:4212\")"
+
+#: modules/lua/vlc.c:82
+msgid "Lua"
+msgstr "Lua"
+
+#: modules/lua/vlc.c:83
+msgid "Lua interpreter"
+msgstr "Lua 解析器"
+
+#: modules/lua/vlc.c:104
+msgid "Lua CLI"
+msgstr "Lua CLI"
+
+#: modules/lua/vlc.c:108
+msgid "Command-line interface"
+msgstr "命令行接口"
+
+#: modules/lua/vlc.c:117 modules/lua/vlc.c:128
+msgid "Lua Telnet"
+msgstr "Lua Telnet"
+
+#: modules/lua/vlc.c:132
+msgid "Lua Meta Fetcher"
+msgstr "Lua 元装取器"
+
+#: modules/lua/vlc.c:133
+msgid "Fetch meta data using lua scripts"
+msgstr "使用 lua 脚本装取元数据"
+
+#: modules/lua/vlc.c:138
+msgid "Lua Meta Reader"
+msgstr "Lua 元读取器"
+
+#: modules/lua/vlc.c:139
+msgid "Read meta data using lua scripts"
+msgstr "使用 lua 脚本读取元数据"
+
+#: modules/lua/vlc.c:145
+msgid "Lua Playlist"
+msgstr "Lua 播放列表"
+
+#: modules/lua/vlc.c:146
+msgid "Lua Playlist Parser Interface"
+msgstr "Lua 播放列表解析器界面"
+
+#: modules/lua/vlc.c:151
+msgid "Lua Art"
+msgstr "Lua 封面"
+
+#: modules/lua/vlc.c:152
+msgid "Fetch artwork using lua scripts"
+msgstr "使用 lua 脚本装取封面"
+
+#: modules/lua/vlc.c:157 modules/lua/vlc.c:158
+msgid "Lua Extension"
+msgstr "Lua 扩展"
+
+#: modules/lua/vlc.c:164
+msgid "Lua SD Module"
+msgstr "Lua SD 模块"
+
+#: modules/meta_engine/folder.c:64
+msgid "Folder meta data"
+msgstr "文件夹元数据"
+
+#: modules/meta_engine/folder.c:66
+msgid "Album art filename"
+msgstr "专辑封面文件名"
+
+#: modules/meta_engine/folder.c:66
+msgid "Filename to look for album art in current directory"
+msgstr "用于在当前目录寻找专辑封面的文件名"
+
+#: modules/misc/audioscrobbler.c:115
+msgid "The username of your last.fm account"
+msgstr "您的 last.fm 用户名帐号"
+
+#: modules/misc/audioscrobbler.c:117
+msgid "The password of your last.fm account"
+msgstr "您的 last.fm 帐号密码"
+
+#: modules/misc/audioscrobbler.c:118
+msgid "Scrobbler URL"
+msgstr "Scrobbler 网址"
+
+#: modules/misc/audioscrobbler.c:119
+msgid "The URL set for an alternative scrobbler engine"
+msgstr "设置可选 scrobbler 引擎的 URL"
+
+#: modules/misc/audioscrobbler.c:131
+msgid "Audioscrobbler"
+msgstr "音频方案"
+
+#: modules/misc/audioscrobbler.c:132
+msgid "Submission of played songs to last.fm"
+msgstr "提交已播放的歌曲给 last.fm"
+
+#: modules/misc/audioscrobbler.c:581
+msgid "last.fm: Authentication failed"
+msgstr "last.fm: 验证失败"
+
+#: modules/misc/audioscrobbler.c:582
+msgid ""
+"last.fm username or password is incorrect. Please verify your settings and "
+"relaunch VLC."
+msgstr "last.fm 用户名或密码不正确。请检查您的设置并重新启动 VLC。"
+
+#: modules/misc/audioscrobbler.c:723
+msgid "Last.fm username not set"
+msgstr "未设置 Last.fm 用户名"
+
+#: modules/misc/audioscrobbler.c:724
+msgid ""
+"Please set a username or disable the audioscrobbler plugin, and restart "
+"VLC.\n"
+"Visit http://www.last.fm/join/ to get an account."
+msgstr ""
+"请设置用户名或关闭音频方案插件, 并重启 VLC。\n"
+"可以访问 http://www.last.fm/join/ 获取帐号。"
+
+#: modules/misc/gnutls.c:51
+msgid "TLS cipher priorities"
+msgstr "TLS 算法优先级"
+
+#: modules/misc/gnutls.c:52
+msgid ""
+"Ciphers, key exchange methods, hash functions and compression methods can be "
+"selected. Refer to GNU TLS documentation for detailed syntax."
+msgstr ""
+"可以选择算法、key 交换方法、hash 函数与压缩方法。详细语法请参考 GNU TLS 文"
+"档。"
+
+#: modules/misc/gnutls.c:63
+msgid "Performance (prioritize faster ciphers)"
+msgstr "性能 (较快算法优先)"
+
+#: modules/misc/gnutls.c:65
+msgid "Secure 128-bits (exclude 256-bits ciphers)"
+msgstr "安全 128-位 (排除 256-位算法)"
+
+#: modules/misc/gnutls.c:66
+msgid "Secure 256-bits (prioritize 256-bits ciphers)"
+msgstr "安全 256-位 (256-位算法优先)"
+
+#: modules/misc/gnutls.c:67
+msgid "Export (include insecure ciphers)"
+msgstr "导出 (包括不安全算法)"
+
+#: modules/misc/gnutls.c:72
+msgid "GNU TLS transport layer security"
+msgstr "GNU TLS 传输层安全"
+
+#: modules/misc/gnutls.c:79
+msgid "GNU TLS server"
+msgstr "GNU TLS 服务器"
+
+#: modules/misc/gnutls.c:269 modules/misc/securetransport.c:327
+#, c-format
+msgid ""
+"You attempted to reach %s. However the security certificate presented by the "
+"server is unknown and could not be authenticated by any trusted "
+"Certification Authority. This problem may be caused by a configuration error "
+"or an attempt to breach your security or your privacy.\n"
+"\n"
+"If in doubt, abort now.\n"
+msgstr ""
+"您正尝试访问 %s。然而，服务器出示的安全证书未知，无法通过任何可信证书颁发机构"
+"的验证。该问题可能因配置错误导致，也可能是因入侵或隐私窃取尝试导致。\n"
+"\n"
+"若您对此存在疑问，请立刻选择“放弃”。\n"
+
+#: modules/misc/gnutls.c:279
+#, c-format
+msgid ""
+"You attempted to reach %s. However the security certificate presented by the "
+"server changed since the previous visit and was not authenticated by any "
+"trusted Certification Authority. This problem may be caused by a "
+"configuration error or an attempt to breach your security or your privacy.\n"
+"\n"
+"If in doubt, abort now.\n"
+msgstr ""
+"您正尝试访问 %s。然而，服务器出示的安全证书与上次访问时出示的不同，并且无法通"
+"过任何可信证书颁发机构的验证。该问题可能因配置错误导致，也可能是因入侵或隐私"
+"窃取尝试导致。\n"
+"\n"
+"若您对此存在疑问，请立刻选择“放弃”。\n"
+
+#: modules/misc/gnutls.c:294 modules/misc/gnutls.c:311
+#: modules/misc/securetransport.c:334
+msgid "Insecure site"
+msgstr "不安全的站点"
+
+#: modules/misc/gnutls.c:295 modules/misc/gnutls.c:314
+#: modules/misc/securetransport.c:335
+msgid "Abort"
+msgstr "放弃"
+
+#: modules/misc/gnutls.c:295
+msgid "View certificate"
+msgstr "查看证书"
+
+#: modules/misc/gnutls.c:312
+#, c-format
+msgid ""
+"This is the certificate presented by %s:\n"
+"%s\n"
+"\n"
+"If in doubt, abort now.\n"
+msgstr ""
+"以下为 %s 出示的证书:\n"
+"%s\n"
+"\n"
+"若您对此存在疑问，请立刻选择“放弃”。\n"
+
+#: modules/misc/gnutls.c:314
+msgid "Accept 24 hours"
+msgstr "接受 24 小时"
+
+#: modules/misc/gnutls.c:315
+msgid "Accept permanently"
+msgstr "永久接受"
+
+#: modules/misc/inhibit/dbus.c:129
+msgid "Playing some media."
+msgstr "正在播放一些媒体文件。"
+
+#: modules/misc/inhibit/dbus.c:232
+msgid "Power"
+msgstr "电源"
+
+#: modules/misc/inhibit/dbus.c:233
+msgid "Inhibits power suspend and session idle timeout."
+msgstr "阻止电源挂起与会话空闲超时。"
+
+#: modules/misc/inhibit/xdg.c:37
+msgid "XDG-screensaver"
+msgstr "XDG-屏幕保护"
+
+#: modules/misc/inhibit/xdg.c:38
+msgid "XDG screen saver inhibition"
+msgstr "XDG 屏幕保护禁止器"
+
+#: modules/misc/logger.c:118
+msgid "Log format"
+msgstr "日志格式"
+
+#: modules/misc/logger.c:119
+msgid "Specify the logging format."
+msgstr "指定日志格式。"
+
+#: modules/misc/logger.c:122
+msgid "Syslog ident"
+msgstr "Syslog 前缀"
+
+#: modules/misc/logger.c:123
+msgid "Set the ident that VLC would use when logging to syslog."
+msgstr "设置 VLC 将日志输出至 syslog 时使用的前缀。"
+
+#: modules/misc/logger.c:126
+msgid "Syslog facility"
+msgstr "Syslog 设备"
+
+#: modules/misc/logger.c:127
+msgid "Select the syslog facility where logs will be forwarded."
+msgstr "选择转发日志的 syslog 设备。"
+
+#: modules/misc/logger.c:154
+msgid "Verbosity"
+msgstr "冗长等级"
+
+#: modules/misc/logger.c:155
+msgid ""
+"Select the verbosity to use for log or -1 to use the same verbosity given by "
+"--verbose."
+msgstr ""
+"选择日志记录冗余程度，或者 -1 表示使用与通过 --verbose 所给出的相同的提示程"
+"度。"
+
+#: modules/misc/logger.c:159
+msgid "Logging"
+msgstr "日志"
+
+#: modules/misc/logger.c:160
+msgid "File logging"
+msgstr "文件日志"
+
+#: modules/misc/logger.c:166
+msgid "Log filename"
+msgstr "日志文件名"
+
+#: modules/misc/logger.c:166
+msgid "Specify the log filename."
+msgstr "指定日志文件名。"
+
+#: modules/misc/playlist/export.c:50
+msgid "M3U playlist export"
+msgstr "M3U 播放列表导出"
+
+#: modules/misc/playlist/export.c:56
+msgid "M3U8 playlist export"
+msgstr "M3U8 播放列表导出"
+
+#: modules/misc/playlist/export.c:62
+msgid "XSPF playlist export"
+msgstr "XSPF 播放列表导出器"
+
+#: modules/misc/playlist/export.c:68
+msgid "HTML playlist export"
+msgstr "M3U 播放列表导出"
+
+#: modules/misc/rtsp.c:61
+msgid "Maximum number of connections"
+msgstr "连接的最大数量"
+
+#: modules/misc/rtsp.c:62
+msgid ""
+"This limits the maximum number of clients that can connect to the RTSP VOD. "
+"0 means no limit."
+msgstr "这将显示客户端可以连接至 RTSP VOD 的最大数量。0 表示不限制。"
+
+#: modules/misc/rtsp.c:65
+msgid "MUX for RAW RTSP transport"
+msgstr "用于 RAW RTSP 传输的 MUX"
+
+#: modules/misc/rtsp.c:67
+msgid "Sets the timeout option in the RTSP session string"
+msgstr "在 RTSP 会话字串中设置超时选项"
+
+#: modules/misc/rtsp.c:69
+msgid ""
+"Defines what timeout option to add to the RTSP session ID string. Setting it "
+"to a negative number removes the timeout option entirely. This is needed by "
+"some IPTV STBs (such as those made by HansunTech) which get confused by it. "
+"The default is 5."
+msgstr ""
+"定义要添加什么超时选项到 RTSP 会话 ID 字串中。请为它设置一个要完整移除的超时"
+"选项条目。这需要一些 IPTV STB (例如一些由 HansunTech 产生的)。默认值为 5。"
+
+#: modules/misc/rtsp.c:75 modules/stream_out/rtp.c:247
+msgid "RTSP VoD"
+msgstr "RTSP VoD"
+
+#: modules/misc/rtsp.c:76
+#, fuzzy
+msgid "Legacy RTSP VoD server"
+msgstr "RTSP VoD 服务器"
+
+#: modules/misc/securetransport.c:53
+msgid "TLS support for OS X and iOS"
+msgstr ""
+
+#: modules/misc/securetransport.c:66
+#, fuzzy
+msgid "TLS server support for OS X"
+msgstr "RTSP 服务器端口"
+
+#: modules/misc/securetransport.c:335
+msgid "Accept certificate temporarily"
+msgstr ""
+
+#: modules/misc/stats.c:211 modules/stream_out/stats.c:51
+msgid "Stats"
+msgstr "统计数据"
+
+#: modules/misc/stats.c:213
+msgid "Stats encoder function"
+msgstr "统计数据编码器函数"
+
+#: modules/misc/stats.c:219
+msgid "Stats decoder"
+msgstr "统计数据解码器"
+
+#: modules/misc/stats.c:220
+msgid "Stats decoder function"
+msgstr "统计数据解码器函数"
+
+#: modules/misc/stats.c:225
+msgid "Stats demux"
+msgstr "统计数据去复用"
+
+#: modules/misc/stats.c:226
+msgid "Stats demux function"
+msgstr "静态去复用功能"
+
+#: modules/misc/xml/libxml.c:49
+msgid "XML Parser (using libxml2)"
+msgstr "XML 解析器 (使用 libxml2)"
+
+#: modules/mux/asf.c:57
+msgid "Title to put in ASF comments."
+msgstr "要放置到 ASF 注释中的标题。"
+
+#: modules/mux/asf.c:59
+msgid "Author to put in ASF comments."
+msgstr "要放置到 ASF 注释中的作者。"
+
+#: modules/mux/asf.c:61
+msgid "Copyright string to put in ASF comments."
+msgstr "要放置到 ASF 注释中的版权字串。"
+
+#: modules/mux/asf.c:62 modules/mux/avi.c:52
+msgid "Comment"
+msgstr "注释"
+
+#: modules/mux/asf.c:63
+msgid "Comment to put in ASF comments."
+msgstr "要放置到 ASF 注释中的注释。"
+
+#: modules/mux/asf.c:65
+msgid "\"Rating\" to put in ASF comments."
+msgstr "要放置到 ASF 注释中的 \"分级\"。"
+
+#: modules/mux/asf.c:66
+msgid "Packet Size"
+msgstr "数据包大小"
+
+#: modules/mux/asf.c:67
+msgid "ASF packet size -- default is 4096 bytes"
+msgstr "ASF 数据包长度 -- 默认是 4096 字节"
+
+#: modules/mux/asf.c:68
+msgid "Bitrate override"
+msgstr "位率覆盖"
+
+#: modules/mux/asf.c:69
+msgid ""
+"Do not try to guess ASF bitrate. Setting this, allows you to control how "
+"Windows Media Player will cache streamed content. Set to audio+video bitrate "
+"in bytes"
+msgstr ""
+"不尝试猜测 ASF 的位率。设置它，将允许您控制 Windows Media Player 将如何缓村流"
+"式内容。以字节为单位设置音频+视频位率"
+
+#: modules/mux/asf.c:73
+msgid "ASF muxer"
+msgstr "ASF 复用器"
+
+#: modules/mux/asf.c:563
+msgid "Unknown Video"
+msgstr "未知视频"
+
+#: modules/mux/avi.c:54
+#, fuzzy
+msgid "Subject"
+msgstr " 对象 "
+
+#: modules/mux/avi.c:55
+#, fuzzy
+msgid "Encoder"
+msgstr "解码器"
+
+#: modules/mux/avi.c:56
+#, fuzzy
+msgid "Keywords"
+msgstr "Podcast 关键词"
+
+#: modules/mux/avi.c:59
+msgid "AVI muxer"
+msgstr "AVI 复用器"
+
+#: modules/mux/dummy.c:45
+msgid "Dummy/Raw muxer"
+msgstr "空/原始复用器"
+
+#: modules/mux/mp4.c:48
+msgid "Create \"Fast Start\" files"
+msgstr "创建 \"快速启动\" 文件"
+
+#: modules/mux/mp4.c:50
+msgid ""
+"Create \"Fast Start\" files. \"Fast Start\" files are optimized for "
+"downloads and allow the user to start previewing the file while it is "
+"downloading."
+msgstr ""
+"创建 \"快速启动\" 文件。\"快速启动\" 文件是用于优化下载并允许用户在文件下载时"
+"对其进行预览。"
+
+#: modules/mux/mp4.c:60
+msgid "MP4/MOV muxer"
+msgstr "MP4/MOV 复用器"
+
+#: modules/mux/mpeg/ps.c:48 modules/mux/mpeg/ts.c:148
+msgid "DTS delay (ms)"
+msgstr "DTS 延迟 (毫秒)"
+
+#: modules/mux/mpeg/ps.c:49
+msgid ""
+"Delay the DTS (decoding time stamps) and PTS (presentation timestamps) of "
+"the data in the stream, compared to the SCRs. This allows for some buffering "
+"inside the client decoder."
+msgstr ""
+"延迟在流中与 SCR 进行比较的的 DTS (解码时间戳) 和 PTS (显示时间戳) 数据。这将"
+"允许某些在客户端解码器中的缓存。"
+
+#: modules/mux/mpeg/ps.c:54
+msgid "PES maximum size"
+msgstr "PES 最大大小"
+
+#: modules/mux/mpeg/ps.c:55
+msgid "Set the maximum allowed PES size when producing the MPEG PS streams."
+msgstr "设置在生成 MPEG PS 流时所允许的最大 PES 大小。"
+
+#: modules/mux/mpeg/ps.c:64
+msgid "PS muxer"
+msgstr "PS 复用器"
+
+#: modules/mux/mpeg/ts.c:88
+msgid "Video PID"
+msgstr "视频 PID"
+
+#: modules/mux/mpeg/ts.c:89
+msgid ""
+"Assign a fixed PID to the video stream. The PCR PID will automatically be "
+"the video."
+msgstr "分配一个固定的 PID 给视频流。PCR PID 将会自动分配给视频。"
+
+#: modules/mux/mpeg/ts.c:91
+msgid "Audio PID"
+msgstr "音频 PID"
+
+#: modules/mux/mpeg/ts.c:92
+msgid "Assign a fixed PID to the audio stream."
+msgstr "分配一个固定的 PID 给音频流。"
+
+#: modules/mux/mpeg/ts.c:93
+msgid "SPU PID"
+msgstr "SPU PID"
+
+#: modules/mux/mpeg/ts.c:94
+msgid "Assign a fixed PID to the SPU."
+msgstr "分配一个固定的 PID 给 SPU。"
+
+#: modules/mux/mpeg/ts.c:95
+msgid "PMT PID"
+msgstr "PMT PID"
+
+#: modules/mux/mpeg/ts.c:96
+msgid "Assign a fixed PID to the PMT"
+msgstr "分配一个固定的 PID 给 PMT"
+
+#: modules/mux/mpeg/ts.c:97
+msgid "TS ID"
+msgstr "TS ID"
+
+#: modules/mux/mpeg/ts.c:98
+msgid "Assign a fixed Transport Stream ID."
+msgstr "分配一个固定的传输流 ID。"
+
+#: modules/mux/mpeg/ts.c:99
+msgid "NET ID"
+msgstr "NET ID"
+
+#: modules/mux/mpeg/ts.c:100
+msgid "Assign a fixed Network ID (for SDT table)"
+msgstr "分配一个固定的网络 ID (用于 SDT 表)"
+
+#: modules/mux/mpeg/ts.c:102
+msgid "PMT Program numbers"
+msgstr "PMT 程序编号"
+
+#: modules/mux/mpeg/ts.c:103
+msgid ""
+"Assign a program number to each PMT. This requires \"Set PID to ID of ES\" "
+"to be enabled."
+msgstr "为每个 PMT 分配一个程序编号。这需要启用 \"设置 PID 给 ES 的 ID\"。"
+
+#: modules/mux/mpeg/ts.c:106
+msgid "Mux PMT (requires --sout-ts-es-id-pid)"
+msgstr "Mux PMT (需要 --sout-ts-es-id-pid)"
+
+#: modules/mux/mpeg/ts.c:107
+msgid ""
+"Define the pids to add to each pmt. This requires \"Set PID to ID of ES\" to "
+"be enabled."
+msgstr "定义要添加到每个 pmt 的 pid。这需要开启 \"设置 PID 给 ES 的 ID\"。"
+
+#: modules/mux/mpeg/ts.c:110
+msgid "SDT Descriptors (requires --sout-ts-es-id-pid)"
+msgstr "SDT 描述符 (需要 --sout-ts-es-id-pid)"
+
+#: modules/mux/mpeg/ts.c:111
+msgid ""
+"Defines the descriptors of each SDT. Thisrequires \"Set PID to ID of ES\" to "
+"be enabled."
+msgstr "定义每个 SDT 的描述符。这需要开启 \"设置 PID 给 ES 的 ID\"。"
+
+#: modules/mux/mpeg/ts.c:114
+msgid "Set PID to ID of ES"
+msgstr "设置 PID 为 ES 的 ID"
+
+#: modules/mux/mpeg/ts.c:115
+msgid ""
+"Sets PID to the ID if the incoming ES. This is for use with --ts-es-id-pid, "
+"and allows having the same PIDs in the input and output streams."
+msgstr ""
+"如果入站的是 ES 则设置 PID 为其 ID。此项与 --ts-es-id-pid 配合使用，并允许输"
+"入与输出流有相同的 PID。"
+
+#: modules/mux/mpeg/ts.c:119
+msgid "Data alignment"
+msgstr "数据排列"
+
+#: modules/mux/mpeg/ts.c:120
+msgid ""
+"Enforces alignment of all access units on PES boundaries. Disabling this "
+"might save some bandwidth but introduce incompatibilities."
+msgstr ""
+"强制排列在 PES 范围中的所有访问单元。关闭此选项会保存相同的带宽但是会造成不兼"
+"容。"
+
+#: modules/mux/mpeg/ts.c:123
+msgid "Shaping delay (ms)"
+msgstr "定型延迟 (毫秒)"
+
+#: modules/mux/mpeg/ts.c:124
+msgid ""
+"Cut the stream in slices of the given duration, and ensure a constant "
+"bitrate between the two boundaries. This avoids having huge bitrate peaks, "
+"especially for reference frames."
+msgstr ""
+"用给予的切片长度剪切流，并在两个边界之间保持恒定码率。这可以避免巨大位率峰"
+"值，特别是对于参考帧来说。"
+
+#: modules/mux/mpeg/ts.c:129
+msgid "Use keyframes"
+msgstr "使用关键帧"
+
+#: modules/mux/mpeg/ts.c:130
+msgid ""
+"If enabled, and shaping is specified, the TS muxer will place the boundaries "
+"at the end of I pictures. In that case, the shaping duration given by the "
+"user is a worse case used when no reference frame is available. This "
+"enhances the efficiency of the shaping algorithm, since I frames are usually "
+"the biggest frames in the stream."
+msgstr ""
+"如果开启并指定的定型，TS 复用器将会在 I 图像的末尾放置分界线。由于此原因用户"
+"给予的修整长度可能会在没有使用参考帧的情况下变糟糕。在 I 帧经常成为流中最大的"
+"帧后这将提高定型算法的效率。"
+
+#: modules/mux/mpeg/ts.c:137
+msgid "PCR interval (ms)"
+msgstr "PCR 间隔(毫秒)"
+
+#: modules/mux/mpeg/ts.c:138
+msgid ""
+"Set at which interval PCRs (Program Clock Reference) will be sent (in "
+"milliseconds). This value should be below 100ms. (default is 70ms)."
+msgstr ""
+"设置将被发送的 PCR (程序时钟参考) 间隔 (以毫秒为单位)。此值应该低于 100 毫"
+"秒。(默认为 70 毫秒)。 "
+
+#: modules/mux/mpeg/ts.c:142
+msgid "Minimum B (deprecated)"
+msgstr "最小 B 值 (不推荐使用)"
+
+#: modules/mux/mpeg/ts.c:143 modules/mux/mpeg/ts.c:146
+msgid "This setting is deprecated and not used anymore"
+msgstr "此设置属不被推荐使用的选项，已不再被使用"
+
+#: modules/mux/mpeg/ts.c:145
+msgid "Maximum B (deprecated)"
+msgstr "最大 B 值 (不推荐使用)"
+
+#: modules/mux/mpeg/ts.c:149
+msgid ""
+"Delay the DTS (decoding time stamps) and PTS (presentation timestamps) of "
+"the data in the stream, compared to the PCRs. This allows for some buffering "
+"inside the client decoder."
+msgstr ""
+"延迟在流中与 SCR 进行比较的的 DTS (解码时间戳) 和 PTS (显示时间戳) 数据。这将"
+"允许某些在客户端解码器中的缓存。"
+
+#: modules/mux/mpeg/ts.c:154
+msgid "Crypt audio"
+msgstr "加密音频"
+
+#: modules/mux/mpeg/ts.c:155
+msgid "Crypt audio using CSA"
+msgstr "使用 CSA 加密音频"
+
+#: modules/mux/mpeg/ts.c:156
+msgid "Crypt video"
+msgstr "加密视频"
+
+#: modules/mux/mpeg/ts.c:157
+msgid "Crypt video using CSA"
+msgstr "使用 CSA 加密视频"
+
+#: modules/mux/mpeg/ts.c:167
+msgid "CSA Key in use"
+msgstr "在使用的 CSA 密匙"
+
+#: modules/mux/mpeg/ts.c:168
+msgid ""
+"CSA encryption key used. It can be the odd/first/1 (default) or the even/"
+"second/2 one."
+msgstr ""
+"在使用的 CSA 加密密匙。它可以是 odd/first/1 (默认) 或 even/second/2 中的一"
+"个。"
+
+#: modules/mux/mpeg/ts.c:171
+msgid "Packet size in bytes to encrypt"
+msgstr "要加密的以字节为单位的数据包大小"
+
+#: modules/mux/mpeg/ts.c:172
+msgid ""
+"Size of the TS packet to encrypt. The encryption routines subtract the TS-"
+"header from the value before encrypting."
+msgstr "要加密的 TS 数据包大小。在加密之前将来自值的加密例行减法器的 TS 头部。"
+
+#: modules/mux/mpeg/ts.c:181
+msgid "TS muxer (libdvbpsi)"
+msgstr "TS 复用器 (libdvbpsi)"
+
+#: modules/mux/mpjpeg.c:47
+msgid "Multipart JPEG muxer"
+msgstr "多部件 JPEG 复用器"
+
+#: modules/mux/ogg.c:47
+#, fuzzy
+msgid "Index interval"
+msgstr "IDR 间隔"
+
+#: modules/mux/ogg.c:48
+msgid ""
+"Minimal index interval, in microseconds. Set to 0 to disable index creation."
+msgstr ""
+
+#: modules/mux/ogg.c:50
+#, fuzzy
+msgid "Index size ratio"
+msgstr "索引文件"
+
+#: modules/mux/ogg.c:52
+msgid "Set index size ratio. Alters default (60min content) or estimated size."
+msgstr ""
+
+#: modules/mux/ogg.c:60
+msgid "Ogg/OGM muxer"
+msgstr "Ogg/OGM 复用器"
+
+#: modules/mux/wav.c:46
+msgid "WAV muxer"
+msgstr "WAV 复用器"
+
+#: modules/notify/growl.m:104
+msgid "Growl Notification Plugin"
+msgstr "Growl 提示插件"
+
+#: modules/notify/growl.m:282
+msgid "New input playing"
+msgstr "正在播放新文件"
+
+#: modules/notify/growl.m:305
+msgid "Now playing"
+msgstr "现在正在播放"
+
+#: modules/notify/notify.c:53
+msgid "Timeout (ms)"
+msgstr "超时 (毫秒)"
+
+#: modules/notify/notify.c:54
+msgid "How long the notification will be displayed "
+msgstr "提示将显示多长时间"
+
+#: modules/notify/notify.c:59
+msgid "Notify"
+msgstr "提示"
+
+#: modules/notify/notify.c:60
+msgid "LibNotify Notification Plugin"
+msgstr "LibNotify 提示插件"
+
+#: modules/packetizer/copy.c:48
+msgid "Copy packetizer"
+msgstr "复制封包器"
+
+#: modules/packetizer/dirac.c:87
+msgid "Dirac packetizer"
+msgstr "Dirac 分包器"
+
+#: modules/packetizer/flac.c:50
+msgid "Flac audio packetizer"
+msgstr "Flac 音频分包器"
+
+#: modules/packetizer/h264.c:55
+msgid "H.264 video packetizer"
+msgstr "H.264 视频封包器"
+
+#: modules/packetizer/hevc.c:50
+#, fuzzy
+msgid "HEVC/H.265 video packetizer"
+msgstr "H.264 视频封包器"
+
+#: modules/packetizer/mlp.c:49
+msgid "MLP/TrueHD parser"
+msgstr "MLP/TrueHD 解析器"
+
+#: modules/packetizer/mpeg4audio.c:174
+msgid "MPEG4 audio packetizer"
+msgstr "MPEG4 音频封包器"
+
+#: modules/packetizer/mpeg4video.c:53
+msgid "MPEG4 video packetizer"
+msgstr "MPEG4 视频封包器"
+
+#: modules/packetizer/mpegvideo.c:57
+msgid "Sync on Intra Frame"
+msgstr "在内部帧中同步"
+
+#: modules/packetizer/mpegvideo.c:58
+msgid ""
+"Normally the packetizer would sync on the next full frame. This flags "
+"instructs the packetizer to sync on the first Intra Frame found."
+msgstr ""
+"通常封包器将会在下一个完全帧时进行同步。此标志将指示分包器在找到第一个内部帧"
+"时就进行同步。"
+
+#: modules/packetizer/mpegvideo.c:71
+msgid "MPEG-I/II video packetizer"
+msgstr "MPEG-I/II 视频封包器"
+
+#: modules/packetizer/mpegvideo.c:72
+msgid "MPEG Video"
+msgstr "MPEG 视频"
+
+#: modules/packetizer/vc1.c:51
+msgid "VC-1 packetizer"
+msgstr "VC-1 封包器"
+
+#: modules/services_discovery/bonjour.c:55
+msgid "Bonjour services"
+msgstr "Bonjour 服务"
+
+#: modules/services_discovery/mediadirs.c:70
+#: modules/services_discovery/mediadirs.c:352
+msgid "My Videos"
+msgstr "我的视频"
+
+#: modules/services_discovery/mediadirs.c:77
+#: modules/services_discovery/mediadirs.c:354
+msgid "My Music"
+msgstr "我的音乐"
+
+#: modules/services_discovery/mediadirs.c:83
+msgid "Picture"
+msgstr "图片"
+
+#: modules/services_discovery/mediadirs.c:84
+#: modules/services_discovery/mediadirs.c:356
+msgid "My Pictures"
+msgstr "我的图片"
+
+#: modules/services_discovery/mtp.c:43
+msgid "MTP devices"
+msgstr "MTP 设备"
+
+#: modules/services_discovery/mtp.c:189
+msgid "MTP Device"
+msgstr "MTP 设备"
+
+#: modules/services_discovery/os2drive.c:43
+#: modules/services_discovery/os2drive.c:44
+#: modules/services_discovery/udev.c:73 modules/services_discovery/udev.c:74
+#: modules/services_discovery/udev.c:103
+#: modules/services_discovery/windrive.c:40
+#: modules/services_discovery/windrive.c:41
+msgid "Discs"
+msgstr "光盘"
+
+#: modules/services_discovery/os2drive.c:96
+#: modules/services_discovery/windrive.c:83
+msgid "Local drives"
+msgstr "本地驱动器"
+
+#: modules/services_discovery/podcast.c:54
+#: modules/gui/qt4/ui/podcast_configuration.h:102
+msgid "Podcast URLs list"
+msgstr "Podcast URL 列表"
+
+#: modules/services_discovery/podcast.c:55
+msgid "Enter the list of podcasts to retrieve, separated by '|' (pipe)."
+msgstr "请输入要检索的 podcast 列表, 由 '|' (竖条) 分隔。"
+
+#: modules/services_discovery/podcast.c:60
+msgid "Podcasts"
+msgstr "Podcast"
+
+#: modules/services_discovery/pulse.c:42 modules/services_discovery/udev.c:64
+#: modules/services_discovery/udev.c:101
+msgid "Audio capture"
+msgstr "音频捕获"
+
+#: modules/services_discovery/pulse.c:43
+msgid "Audio capture (PulseAudio)"
+msgstr "音频捕获 (PulseAudio)"
+
+#: modules/services_discovery/pulse.c:186 modules/stream_out/es.c:85
+msgid "Generic"
+msgstr "一般"
+
+#: modules/services_discovery/sap.c:81
+msgid "SAP multicast address"
+msgstr "SAP 多播地址"
+
+#: modules/services_discovery/sap.c:82
+msgid ""
+"The SAP module normally chooses itself the right addresses to listen to. "
+"However, you can specify a specific address."
+msgstr "SAP 模块通常自己会选择正确的监听地址。当然您自己也可以指定一个地址。"
+
+#: modules/services_discovery/sap.c:85
+msgid "SAP timeout (seconds)"
+msgstr "SAP 超时时限 (秒)"
+
+#: modules/services_discovery/sap.c:87
+msgid ""
+"Delay after which SAP items get deleted if no new announcement is received."
+msgstr "在 SAP 项目没有接受到新的宣告时删除的延迟。"
+
+#: modules/services_discovery/sap.c:89
+msgid "Try to parse the announce"
+msgstr "尝试解析通告"
+
+#: modules/services_discovery/sap.c:91
+msgid ""
+"This enables actual parsing of the announces by the SAP module. Otherwise, "
+"all announcements are parsed by the \"live555\" (RTP/RTSP) module."
+msgstr ""
+"这将会开启 SAP 模块的实际宣告解析。否则所有宣告将会使用 \"live555\" (RTP/"
+"RTSP) 模块解析。"
+
+#: modules/services_discovery/sap.c:94
+msgid "SAP Strict mode"
+msgstr "SAP 严格模式"
+
+#: modules/services_discovery/sap.c:96
+msgid ""
+"When this is set, the SAP parser will discard some non-compliant "
+"announcements."
+msgstr "在开启此选项时，SAP 解析器将会放弃一些非必要的通知。"
+
+#: modules/services_discovery/sap.c:108
+msgid "SAP"
+msgstr "SAP"
+
+#: modules/services_discovery/sap.c:109
+msgid "Network streams (SAP)"
+msgstr "网络流 (SAP)"
+
+#: modules/services_discovery/sap.c:131
+msgid "SDP Descriptions parser"
+msgstr "SDP 描述解析器"
+
+#: modules/services_discovery/sap.c:886 modules/services_discovery/sap.c:890
+msgid "Session"
+msgstr "会话"
+
+#: modules/services_discovery/sap.c:886
+msgid "Tool"
+msgstr "工具"
+
+#: modules/services_discovery/sap.c:890
+msgid "User"
+msgstr "用户"
+
+#: modules/services_discovery/udev.c:55 modules/services_discovery/udev.c:97
+msgid "Video capture"
+msgstr "视频捕获"
+
+#: modules/services_discovery/udev.c:56
+msgid "Video capture (Video4Linux)"
+msgstr "视频捕获 (Video4Linux)"
+
+#: modules/services_discovery/udev.c:65
+msgid "Audio capture (ALSA)"
+msgstr "音频捕获 (ALSA)"
+
+#: modules/services_discovery/udev.c:593
+msgid "CD"
+msgstr "CD"
+
+#: modules/services_discovery/udev.c:595 modules/gui/qt4/ui/open_disk.h:299
+msgid "DVD"
+msgstr "DVD"
+
+#: modules/services_discovery/udev.c:599
+msgid "HD DVD"
+msgstr "HD DVD"
+
+#: modules/services_discovery/udev.c:606
+msgid "Unknown type"
+msgstr "未知类型"
+
+#: modules/services_discovery/upnp.cpp:71
+msgid "Universal Plug'n'Play"
+msgstr "通用即插即播"
+
+#: modules/services_discovery/xcb_apps.c:48
+#: modules/services_discovery/xcb_apps.c:49
+#: modules/services_discovery/xcb_apps.c:86
+#: modules/services_discovery/xcb_apps.c:151
+msgid "Screen capture"
+msgstr "屏幕捕获"
+
+#: modules/services_discovery/xcb_apps.c:152
+msgid "Your window manager does not provide a list of applications."
+msgstr "您的窗口管理器未提供应用程序列表。"
+
+#: modules/services_discovery/xcb_apps.c:275
+msgid "Applications"
+msgstr "应用程序"
+
+#: modules/services_discovery/xcb_apps.c:351
+#: modules/video_output/msw/direct3d.c:226
+msgid "Desktop"
+msgstr "桌面"
+
+#: modules/stream_filter/dash/dash.cpp:55
+#: modules/stream_filter/dash/dash.cpp:56
+msgid "Preferred Width"
+msgstr "偏好宽度"
+
+#: modules/stream_filter/dash/dash.cpp:58
+#: modules/stream_filter/dash/dash.cpp:59
+msgid "Preferred Height"
+msgstr "偏好高度"
+
+#: modules/stream_filter/dash/dash.cpp:61
+msgid "Buffer Size (Seconds)"
+msgstr "缓冲区大小 (秒)"
+
+#: modules/stream_filter/dash/dash.cpp:62
+msgid "Buffer size in seconds"
+msgstr "缓冲区大小，单位为 "
+
+#: modules/stream_filter/dash/dash.cpp:65
+msgid "DASH"
+msgstr "DASH"
+
+#: modules/stream_filter/dash/dash.cpp:66
+msgid "Dynamic Adaptive Streaming over HTTP"
+msgstr "HTTP 动态自适应串流"
+
+#: modules/stream_filter/decomp.c:59
+msgid "LZMA decompression"
+msgstr "LZMA 解压缩"
+
+#: modules/stream_filter/decomp.c:63
+msgid "Burrows-Wheeler decompression"
+msgstr "Burrows-Wheeler 解压缩"
+
+#: modules/stream_filter/decomp.c:68
+msgid "gzip decompression"
+msgstr "gzip 解压缩"
+
+#: modules/stream_filter/httplive.c:55
+msgid "Http Live Streaming stream filter"
+msgstr "Http 直播串流流滤镜"
+
+#: modules/stream_filter/record.c:49
+msgid "Internal stream record"
+msgstr "内部串流录制"
+
+#: modules/stream_filter/smooth/smooth.c:61
+msgid "Smooth Streaming"
+msgstr "平滑 "
+
+#: modules/stream_out/autodel.c:46
+msgid "Autodel"
+msgstr "自动删除"
+
+#: modules/stream_out/autodel.c:47
+msgid "Automatically add/delete input streams"
+msgstr "自动添加/删除输入流"
+
+#: modules/stream_out/bridge.c:43
+msgid ""
+"Integer identifier for this elementary stream. This will be used to \"find\" "
+"this stream later."
+msgstr "用于此通量流的整数标识符。这将在稍后被用作 \"发现\" 此流。"
+
+#: modules/stream_out/bridge.c:46
+msgid "Destination bridge-in name"
+msgstr "目标连入桥名称"
+
+#: modules/stream_out/bridge.c:48
+msgid ""
+"Name of the destination bridge-in. If you do not need more than one bridge-"
+"in at a time, you can discard this option."
+msgstr "目标连入桥的名称。如果您不需要同时使用多个连入桥，可以忽略此选项。"
+
+#: modules/stream_out/bridge.c:52
+msgid ""
+"Pictures coming from the picture video outputs will be delayed according to "
+"this value (in milliseconds, should be >= 100 ms). For high values, you will "
+"need to raise caching values."
+msgstr ""
+"来自图片视频输出的图片将按照此值 (以毫秒为单位，应 >= 100 毫秒) 被延迟。要使"
+"用高的值，您将同时需要加大缓冲值。"
+
+#: modules/stream_out/bridge.c:56
+msgid "ID Offset"
+msgstr "ID 偏移"
+
+#: modules/stream_out/bridge.c:57
+msgid ""
+"Offset to add to the stream IDs specified in bridge_out to obtain the stream "
+"IDs bridge_in will register."
+msgstr "添加到在 bridge_out 中流 ID 偏移以使流 ID 的 bridge_in 注册。"
+
+#: modules/stream_out/bridge.c:60
+msgid "Name of current instance"
+msgstr "当前实例名称"
+
+#: modules/stream_out/bridge.c:62
+msgid ""
+"Name of this bridge-in instance. If you do not need more than one bridge-in "
+"at a time, you can discard this option."
+msgstr "此连入桥实例的名称。如果您不需要同时使用多个连入桥，可以忽略此选项。"
+
+#: modules/stream_out/bridge.c:65
+msgid "Fallback to placeholder stream when out of data"
+msgstr "缺数据时退回到占位流"
+
+#: modules/stream_out/bridge.c:67
+msgid ""
+"If set to true, the bridge will discard all input elementary streams except "
+"if it doesn't receive data from another bridge-in. This can be used to "
+"configure a place holder stream when the real source breaks. Source and "
+"placeholder streams should have the same format. "
+msgstr ""
+"如果设为 true，桥没有从其他连入桥接收到数据时将忽略所有的输入基本流。这可在真"
+"实源中断时用于配置占位流。源与占位流的格式应该相同。"
+
+#: modules/stream_out/bridge.c:72
+msgid "Placeholder delay"
+msgstr "占位延迟"
+
+#: modules/stream_out/bridge.c:74
+msgid "Delay (in ms) before the placeholder kicks in."
+msgstr "占位流生效前的延时 (毫秒)。"
+
+#: modules/stream_out/bridge.c:76
+msgid "Wait for I frame before toggling placeholder"
+msgstr "等出现 I 帧后再切换占位流"
+
+#: modules/stream_out/bridge.c:78
+msgid ""
+"If enabled, switching between the placeholder and the normal stream will "
+"only occur on I frames. This will remove artifacts on stream switching at "
+"the expense of a slightly longer delay, depending on the frequence of I "
+"frames in the streams."
+msgstr ""
+"如果启用，在占位流和正常流之间的切换将只在 I 帧进行。这将以稍微长些的延时（取"
+"决于流中 I 帧出现的频率）为代价避免流切换时的花屏。"
+
+#: modules/stream_out/bridge.c:92
+msgid "Bridge"
+msgstr "桥接"
+
+#: modules/stream_out/bridge.c:93
+msgid "Bridge stream output"
+msgstr "桥接流输出"
+
+#: modules/stream_out/bridge.c:95
+msgid "Bridge out"
+msgstr "桥接输出"
+
+#: modules/stream_out/bridge.c:108
+msgid "Bridge in"
+msgstr "桥接输入"
+
+#: modules/stream_out/delay.c:39 modules/stream_out/langfromtelx.c:42
+#: modules/stream_out/setid.c:41
+msgid "Elementary Stream ID"
+msgstr "通量流 ID"
+
+#: modules/stream_out/delay.c:41 modules/stream_out/setid.c:43
+msgid "Specify an identifier integer for this elementary stream"
+msgstr "为该通量流指定标识性整数"
+
+#: modules/stream_out/delay.c:43
+msgid "Delay of the ES (ms)"
+msgstr "ES 延迟 (ms)"
+
+#: modules/stream_out/delay.c:45
+msgid ""
+"Specify a delay (in ms) for this elementary stream. Positive means delay and "
+"negative means advance."
+msgstr "为该通量流指定延迟 (ms)。正数表示延迟，负数表示提前。"
+
+#: modules/stream_out/delay.c:55
+msgid "Delay a stream"
+msgstr "延迟流"
+
+#: modules/stream_out/description.c:54
+msgid "Description stream output"
+msgstr "描述流输出"
+
+#: modules/stream_out/display.c:41
+msgid "Enable/disable audio rendering."
+msgstr "开启/关闭音频渲染。"
+
+#: modules/stream_out/display.c:43
+msgid "Enable/disable video rendering."
+msgstr "开启/关闭视频渲染。"
+
+#: modules/stream_out/display.c:44
+msgid "Delay (ms)"
+msgstr "延迟 (ms)"
+
+#: modules/stream_out/display.c:45
+msgid "Introduces a delay in the display of the stream."
+msgstr "在显示流时插入延迟。"
+
+#: modules/stream_out/display.c:54
+msgid "Display stream output"
+msgstr "显示流输出"
+
+#: modules/stream_out/duplicate.c:44
+msgid "Duplicate stream output"
+msgstr "复制流输出"
+
+#: modules/stream_out/es.c:41 modules/stream_out/standard.c:41
+msgid "Output access method"
+msgstr "输出访问模式"
+
+#: modules/stream_out/es.c:43
+msgid "This is the default output access method that will be used."
+msgstr "这是将要使用的默认输出访问模式。"
+
+#: modules/stream_out/es.c:45
+msgid "Audio output access method"
+msgstr "音频输出访问模式"
+
+#: modules/stream_out/es.c:47
+msgid "This is the output access method that will be used for audio."
+msgstr "这是将要用于的音频输出访问模块。"
+
+#: modules/stream_out/es.c:48
+msgid "Video output access method"
+msgstr "视频输出访问模块"
+
+#: modules/stream_out/es.c:50
+msgid "This is the output access method that will be used for video."
+msgstr "这是将要用于视频输出的访问模块。"
+
+#: modules/stream_out/es.c:52 modules/stream_out/standard.c:44
+msgid "Output muxer"
+msgstr "输出复用器"
+
+#: modules/stream_out/es.c:54
+msgid "This is the default muxer method that will be used."
+msgstr "这是将要被使用的默认复用器。"
+
+#: modules/stream_out/es.c:55
+msgid "Audio output muxer"
+msgstr "音频输出复用器"
+
+#: modules/stream_out/es.c:57
+msgid "This is the muxer that will be used for audio."
+msgstr "这是将要用于音频的复用器。"
+
+#: modules/stream_out/es.c:58
+msgid "Video output muxer"
+msgstr "视频输出复用器"
+
+#: modules/stream_out/es.c:60
+msgid "This is the muxer that will be used for video."
+msgstr "这是将要用于视频的复用器。"
+
+#: modules/stream_out/es.c:62
+msgid "Output URL"
+msgstr "输出 URL"
+
+#: modules/stream_out/es.c:64
+msgid "This is the default output URI."
+msgstr "这是默认的输出 URL。"
+
+#: modules/stream_out/es.c:65
+msgid "Audio output URL"
+msgstr "音频输出 URL"
+
+#: modules/stream_out/es.c:67
+msgid "This is the output URI that will be used for audio."
+msgstr "这是将要用于音频的输出 URL。"
+
+#: modules/stream_out/es.c:68
+msgid "Video output URL"
+msgstr "视频输出 URL"
+
+#: modules/stream_out/es.c:70
+msgid "This is the output URI that will be used for video."
+msgstr "这是将要用于视频的输出 URL。"
+
+#: modules/stream_out/es.c:79
+msgid "Elementary stream output"
+msgstr "通量流输出"
+
+#: modules/stream_out/es.c:363 modules/stream_out/es.c:378
+#, c-format
+msgid "There is no suitable stream-output access module for \"%s/%s://%s\"."
+msgstr "没有用于 \"%s/%s://%s\" 的合适流输出访问模块。"
+
+#: modules/stream_out/gather.c:44
+msgid "Gathering stream output"
+msgstr "正在收集流输出"
+
+#: modules/stream_out/langfromtelx.c:44
+msgid "Specify an identifier integer for this elementary stream to change"
+msgstr "指定该通量流要更改的标识性整数"
+
+#: modules/stream_out/langfromtelx.c:45
+msgid "Magazine"
+msgstr "仓库"
+
+#: modules/stream_out/langfromtelx.c:47
+msgid "Specify the magazine containing the language page"
+msgstr "指定含此语言页的仓库"
+
+#: modules/stream_out/langfromtelx.c:48
+msgid "Page"
+msgstr "页"
+
+#: modules/stream_out/langfromtelx.c:50
+msgid "Specify the page containing the language"
+msgstr "指定含此语言的页面"
+
+#: modules/stream_out/langfromtelx.c:51
+msgid "Row"
+msgstr "行"
+
+#: modules/stream_out/langfromtelx.c:53
+msgid "Specify the row containing the language"
+msgstr "指定含此语言的行"
+
+#: modules/stream_out/langfromtelx.c:61
+msgid "Lang From Telx"
+msgstr "Telx 语言"
+
+#: modules/stream_out/langfromtelx.c:62
+msgid "Dynamic language setting from teletext"
+msgstr "teletext 动态语言设置"
+
+#: modules/stream_out/mosaic_bridge.c:107
+msgid "Specify an identifier string for this subpicture"
+msgstr "指定一个用于此子画面的标识符"
+
+#: modules/stream_out/mosaic_bridge.c:111
+#: modules/stream_out/transcode/transcode.c:69
+msgid "Output video width."
+msgstr "输出视频宽度。"
+
+#: modules/stream_out/mosaic_bridge.c:114
+#: modules/stream_out/transcode/transcode.c:72
+msgid "Output video height."
+msgstr "输出视频高度。"
+
+#: modules/stream_out/mosaic_bridge.c:115
+msgid "Sample aspect ratio"
+msgstr "示范高宽比"
+
+#: modules/stream_out/mosaic_bridge.c:117
+msgid "Sample aspect ratio of the destination (1:1, 3:4, 2:3)."
+msgstr "目标的示范高宽比 (1:1, 3:4, 2:3)。"
+
+#: modules/stream_out/mosaic_bridge.c:119
+#: modules/stream_out/transcode/transcode.c:79
+msgid "Video filter"
+msgstr "视频滤镜"
+
+#: modules/stream_out/mosaic_bridge.c:121
+msgid "Video filters will be applied to the video stream."
+msgstr "将要被应用的视频流的视频滤镜。"
+
+#: modules/stream_out/mosaic_bridge.c:123
+msgid "Image chroma"
+msgstr "图像色度"
+
+#: modules/stream_out/mosaic_bridge.c:125
+msgid ""
+"Force the use of a specific chroma. Use YUVA if you're planning to use the "
+"Alphamask or Bluescreen video filter."
+msgstr ""
+"强制使用一个指定的色度。如果您计划使用 Alphamask 或蓝屏视频滤镜请使用 YUVA。"
+
+#: modules/stream_out/mosaic_bridge.c:130
+msgid "Transparency of the mosaic picture."
+msgstr "mosaic 图像的透明度。"
+
+#: modules/stream_out/mosaic_bridge.c:132 modules/video_filter/marq.c:95
+#: modules/video_filter/rss.c:142
+#: share/lua/http/dialogs/mosaic_window.html:100
+msgid "X offset"
+msgstr "X 偏移"
+
+#: modules/stream_out/mosaic_bridge.c:134
+msgid "X coordinate of the upper left corner in the mosaic if non negative."
+msgstr "在 mosaic 左上角开始的非负 X 坐标。"
+
+#: modules/stream_out/mosaic_bridge.c:136 modules/video_filter/marq.c:97
+#: modules/video_filter/rss.c:144
+#: share/lua/http/dialogs/mosaic_window.html:118
+msgid "Y offset"
+msgstr "Y 偏移"
+
+#: modules/stream_out/mosaic_bridge.c:138
+msgid "Y coordinate of the upper left corner in the mosaic if non negative."
+msgstr "在 mosaic 左上角开始的非负 Y 坐标。"
+
+#: modules/stream_out/mosaic_bridge.c:143
+msgid "Mosaic bridge"
+msgstr "Mosaic 桥"
+
+#: modules/stream_out/mosaic_bridge.c:144
+msgid "Mosaic bridge stream output"
+msgstr "Mosaic 桥流输出"
+
+#: modules/stream_out/raop.c:148
+msgid "Hostname or IP address of target device"
+msgstr "目标设备的主机名或 IP 地址"
+
+#: modules/stream_out/raop.c:151
+msgid ""
+"Output volume for analog output: 0 for silence, 1..255 from almost silent to "
+"very loud."
+msgstr "模拟输出的输出音量: 0 为静音，1..255 由几乎听不见到非常响亮。"
+
+#: modules/stream_out/raop.c:155
+msgid "Password for target device."
+msgstr "目标设备的密码。"
+
+#: modules/stream_out/raop.c:157
+msgid "Password file"
+msgstr "密码文件"
+
+#: modules/stream_out/raop.c:158
+msgid "Read password for target device from file."
+msgstr "由文件读取目标设备的密码。"
+
+#: modules/stream_out/raop.c:161
+msgid "RAOP"
+msgstr "RAOP"
+
+#: modules/stream_out/raop.c:162
+msgid "Remote Audio Output Protocol stream output"
+msgstr "远程音频输出协议 (RAOP) 串流输出"
+
+#: modules/stream_out/record.c:50
+msgid "Destination prefix"
+msgstr "目标前缀"
+
+#: modules/stream_out/record.c:52
+msgid "Prefix of the destination file automatically generated"
+msgstr "自动创建的目标文件的前缀"
+
+#: modules/stream_out/record.c:57
+msgid "Record stream output"
+msgstr "录制串流输出"
+
+#: modules/stream_out/rtp.c:76
+msgid "This is the output URL that will be used."
+msgstr "这是将被使用的输出 URL。"
+
+#: modules/stream_out/rtp.c:79
+msgid ""
+"This allows you to specify how the SDP (Session Descriptor) for this RTP "
+"session will be made available. You must use a url: http://location to "
+"access the SDP via HTTP, rtsp://location for RTSP access, and sap:// for the "
+"SDP to be announced via SAP."
+msgstr ""
+"这将允许您为此 RTP 会话指定如何使 SDP (会话描述符) 变为可用。您必须使用一个 "
+"URL http://位置 地址通过 HTTP 访问 SDP，rtsp://位置 地址用于 RTSP 访问，而 "
+"sap:// 用于通过 SAP 发布的 SDP 广播。"
+
+#: modules/stream_out/rtp.c:83 modules/stream_out/standard.c:81
+msgid "SAP announcing"
+msgstr "SAP 宣告"
+
+#: modules/stream_out/rtp.c:84 modules/stream_out/standard.c:82
+msgid "Announce this session with SAP."
+msgstr "使用 SAP 宣告此会话。"
+
+#: modules/stream_out/rtp.c:87
+msgid ""
+"This allows you to specify the muxer used for the streaming output. Default "
+"is to use no muxer (standard RTP stream)."
+msgstr "这将允许您指定用于流输出的复用器。默认不使用复用器 (标准 RTP 流)。"
+
+#: modules/stream_out/rtp.c:90 modules/stream_out/standard.c:58
+msgid "Session name"
+msgstr "会话名称"
+
+#: modules/stream_out/rtp.c:92 modules/stream_out/standard.c:60
+msgid ""
+"This is the name of the session that will be announced in the SDP (Session "
+"Descriptor)."
+msgstr "这是将被在 SDP (会话描述符) 中宣告的会话名称。"
+
+#: modules/stream_out/rtp.c:94
+msgid "Session category"
+msgstr "会话类别"
+
+#: modules/stream_out/rtp.c:96
+msgid ""
+"This allows you to specify a category for the session, that will be "
+"announced if you choose to use SAP."
+msgstr "若选择使用 SAP，这将允许您指定会话类别。"
+
+#: modules/stream_out/rtp.c:98 modules/stream_out/standard.c:62
+msgid "Session description"
+msgstr "会话描述"
+
+#: modules/stream_out/rtp.c:100 modules/stream_out/standard.c:64
+msgid ""
+"This allows you to give a short description with details about the stream, "
+"that will be announced in the SDP (Session Descriptor)."
+msgstr "这将允许您给予一个将被在 SDP (会话描述符) 中宣告的短描述的详细流信息。"
+
+#: modules/stream_out/rtp.c:102 modules/stream_out/standard.c:66
+msgid "Session URL"
+msgstr "会话 URL"
+
+#: modules/stream_out/rtp.c:104 modules/stream_out/standard.c:68
+msgid ""
+"This allows you to give a URL with more details about the stream (often the "
+"website of the streaming organization), that will be announced in the SDP "
+"(Session Descriptor)."
+msgstr ""
+"这将允许您指定一个将被在 SDP (会话描述符) 中发布的含详细流信息的 URL (通常是"
+"串流组织的网站)。"
+
+#: modules/stream_out/rtp.c:107 modules/stream_out/standard.c:71
+msgid "Session email"
+msgstr "会话电子邮件"
+
+#: modules/stream_out/rtp.c:109 modules/stream_out/standard.c:73
+msgid ""
+"This allows you to give a contact mail address for the stream, that will be "
+"announced in the SDP (Session Descriptor)."
+msgstr "这将允许您为要在 SDP (会话描述符) 中宣告的流给予一个联系的邮件。"
+
+#: modules/stream_out/rtp.c:111 modules/stream_out/standard.c:75
+msgid "Session phone number"
+msgstr "会话电话号码"
+
+#: modules/stream_out/rtp.c:113 modules/stream_out/standard.c:77
+msgid ""
+"This allows you to give a contact telephone number for the stream, that will "
+"be announced in the SDP (Session Descriptor)."
+msgstr "这将允许您为要在 SDP (会话描述符) 中宣告的流给予一个联系的电话号码。"
+
+#: modules/stream_out/rtp.c:118
+msgid "This allows you to specify the base port for the RTP streaming."
+msgstr "这将允许您为 RTP 流指定一个基础端口。"
+
+#: modules/stream_out/rtp.c:119
+msgid "Audio port"
+msgstr "音频端口"
+
+#: modules/stream_out/rtp.c:121
+msgid ""
+"This allows you to specify the default audio port for the RTP streaming."
+msgstr "这将允许您为 RTP 流指定一个默认的音频端口。"
+
+#: modules/stream_out/rtp.c:122
+msgid "Video port"
+msgstr "视频端口"
+
+#: modules/stream_out/rtp.c:124
+msgid ""
+"This allows you to specify the default video port for the RTP streaming."
+msgstr "这将允许您为 RTP 流指定一个默认的视频端口。"
+
+#: modules/stream_out/rtp.c:132
+msgid "RTP/RTCP multiplexing"
+msgstr "RTP/RTCP 多路技术"
+
+#: modules/stream_out/rtp.c:134
+msgid ""
+"This sends and receives RTCP packet multiplexed over the same port as RTP "
+"packets."
+msgstr "这将通过同一端口作为 RTP 数据包发送被接收 RTCP 数据包。"
+
+#: modules/stream_out/rtp.c:139
+msgid ""
+"Default caching value for outbound RTP streams. This value should be set in "
+"milliseconds."
+msgstr "默认出站 RTP 流的缓存值。此值应该以毫秒为单位设置。"
+
+#: modules/stream_out/rtp.c:142
+msgid "Transport protocol"
+msgstr "传输协议"
+
+#: modules/stream_out/rtp.c:144
+msgid "This selects which transport protocol to use for RTP."
+msgstr "这将选择 RTP 要使用的传输协议。"
+
+#: modules/stream_out/rtp.c:148
+msgid ""
+"RTP packets will be integrity-protected and ciphered with this Secure RTP "
+"master shared secret key. This must be a 32-character-long hexadecimal "
+"string."
+msgstr ""
+"RTP 数据包将被完整的保护并使用此安全 RTP 主共享密匙进行加密。需为 32 字符长的"
+"十六进制字串。"
+
+#: modules/stream_out/rtp.c:165
+msgid "MP4A LATM"
+msgstr "MP4A LATM"
+
+#: modules/stream_out/rtp.c:167
+msgid "This allows you to stream MPEG4 LATM audio streams (see RFC3016)."
+msgstr "这将允许您流式 MPEG4 LATM 音频流 (查看 RFC3016)。"
+
+#: modules/stream_out/rtp.c:169
+msgid "RTSP session timeout (s)"
+msgstr "RTSP 会话超时 (s)"
+
+#: modules/stream_out/rtp.c:170
+msgid ""
+"RTSP sessions will be closed after not receiving any RTSP request for this "
+"long. Setting it to a negative value or zero disables timeouts. The default "
+"is 60 (one minute)."
+msgstr ""
+"RTSP 会话将在超过此时长收不到任何 RTSP 请求时关闭。设为负值或 0 可禁用超时。"
+"默认为 60 (一分钟)。"
+
+#: modules/stream_out/rtp.c:190
+msgid "RTP stream output"
+msgstr "RTP 流输出"
+
+#: modules/stream_out/rtp.c:248
+msgid "RTSP VoD server"
+msgstr "RTSP VoD 服务器"
+
+#: modules/stream_out/setid.c:45
+msgid "New ES ID"
+msgstr "新建 ES ID"
+
+#: modules/stream_out/setid.c:47
+msgid "Specify an new identifier integer for this elementary stream"
+msgstr "为该通量流指定新的标识性整数"
+
+#: modules/stream_out/setid.c:51
+msgid "Specify an ISO-639 code (three characters) for this elementary stream"
+msgstr "为该通量流指定 ISO-639 代码 (三个字符)"
+
+#: modules/stream_out/setid.c:61
+msgid "Set ID"
+msgstr "设置 ID"
+
+#: modules/stream_out/setid.c:62
+msgid "Set ES id"
+msgstr "设置 ES id"
+
+#: modules/stream_out/setid.c:63
+msgid "Change the id of an elementary stream"
+msgstr "更改通量流的 id"
+
+#: modules/stream_out/setid.c:74
+msgid "Set ES Lang"
+msgstr "设置 ES 语言"
+
+#: modules/stream_out/setid.c:75
+msgid "Set Lang"
+msgstr "设置语言"
+
+#: modules/stream_out/setid.c:76
+msgid "Change the language of an elementary stream"
+msgstr "更改通量流的语言"
+
+#: modules/stream_out/smem.c:61
+msgid "Video prerender callback"
+msgstr "视频预渲染器回调"
+
+#: modules/stream_out/smem.c:62
+msgid ""
+"Address of the video prerender callback function. This function will set the "
+"buffer where render will be done."
+msgstr "视频预渲染器回调函数的地址。此函数设定用于完成渲染的缓冲器。"
+
+#: modules/stream_out/smem.c:65
+msgid "Audio prerender callback"
+msgstr "音频预渲染器回调"
+
+#: modules/stream_out/smem.c:66
+msgid ""
+"Address of the audio prerender callback function. This function will set the "
+"buffer where render will be done."
+msgstr "音频预渲染器回调函数的地址。此函数设定用于完成渲染的缓冲器。"
+
+#: modules/stream_out/smem.c:69
+msgid "Video postrender callback"
+msgstr "视频后渲染器回调"
+
+#: modules/stream_out/smem.c:70
+msgid ""
+"Address of the video postrender callback function. This function will be "
+"called when the render is into the buffer."
+msgstr "视频后渲染器回调函数的地址。此函数将在渲染进入缓冲器时调用。"
+
+#: modules/stream_out/smem.c:73
+msgid "Audio postrender callback"
+msgstr "音频后渲染器回调"
+
+#: modules/stream_out/smem.c:74
+msgid ""
+"Address of the audio postrender callback function. This function will be "
+"called when the render is into the buffer."
+msgstr "音频后渲染器回调函数的地址。此函数将在渲染进入缓冲器时调用。"
+
+#: modules/stream_out/smem.c:77
+msgid "Video Callback data"
+msgstr "视频回调数据"
+
+#: modules/stream_out/smem.c:78
+msgid "Data for the video callback function."
+msgstr "视频回调函数的数据。"
+
+#: modules/stream_out/smem.c:80
+msgid "Audio callback data"
+msgstr "音频回调数据"
+
+#: modules/stream_out/smem.c:81
+msgid "Data for the audio callback function."
+msgstr "音频回调函数的数据。"
+
+#: modules/stream_out/smem.c:83
+msgid "Time Synchronized output"
+msgstr "已同步时间的输出"
+
+#: modules/stream_out/smem.c:84
+msgid ""
+"Time Synchronisation option for output. If true, stream will render as "
+"usual, else it will be rendered as fast as possible."
+msgstr "输出时间同步选项。如果为真，将照常渲染流，否则将尽可能快地渲染。"
+
+#: modules/stream_out/smem.c:96
+msgid "Smem"
+msgstr "Smem"
+
+#: modules/stream_out/smem.c:97
+msgid "Stream output to memory buffer"
+msgstr "输出到内存缓冲器的流"
+
+#: modules/stream_out/stats.c:42
+#, fuzzy
+msgid "Writes stats to file instead of stdout"
+msgstr "使用旋转视频滤镜代替变换"
+
+#: modules/stream_out/stats.c:43
+msgid "Prefix to show on output line"
+msgstr ""
+
+#: modules/stream_out/stats.c:52
+msgid "Writes statistic info about stream"
+msgstr ""
+
+#: modules/stream_out/standard.c:43
+msgid "Output method to use for the stream."
+msgstr "用于流的输出模块。"
+
+#: modules/stream_out/standard.c:46
+msgid "Muxer to use for the stream."
+msgstr "用于流的复用器。"
+
+#: modules/stream_out/standard.c:47
+#: share/lua/http/dialogs/create_stream.html:334
+#: share/lua/http/dialogs/create_stream.html:378
+msgid "Output destination"
+msgstr "输出目标"
+
+#: modules/stream_out/standard.c:49
+msgid ""
+"Destination (URL) to use for the stream. Overrides path and bind parameters"
+msgstr "用于流的目标 (URL)。替代路径和绑定参数"
+
+#: modules/stream_out/standard.c:50
+msgid "address to bind to (helper setting for dst)"
+msgstr "要绑定的地址 (dst 的补充设置)"
+
+#: modules/stream_out/standard.c:52
+msgid ""
+"address:port to bind vlc to listening incoming streams helper setting for "
+"dst,dst=bind+'/'+path. dst-parameter overrides this"
+msgstr ""
+"将绑定给 vlc 监听入站流的 地址:端口，此为 dst 补充设置，dst=绑定+'/'+路径。"
+"dts 参数将替代此项"
+
+#: modules/stream_out/standard.c:54
+msgid "filename for stream (helper setting for dst)"
+msgstr "用于流的文件名 (用于 dts 的帮助器设置)"
+
+#: modules/stream_out/standard.c:56
+msgid ""
+"Filename for stream helper setting for dst, dst=bind+'/'+path, dst-parameter "
+"overrides this"
+msgstr "用于 dts 的流帮助器设置文件名, dst=绑定+'/'+路径。dts 参数将替代此项"
+
+#: modules/stream_out/standard.c:91
+msgid "Standard stream output"
+msgstr "标准流输出"
+
+#: modules/stream_out/transcode/transcode.c:45
+msgid "Video encoder"
+msgstr "视频编码器"
+
+#: modules/stream_out/transcode/transcode.c:47
+msgid ""
+"This is the video encoder module that will be used (and its associated "
+"options)."
+msgstr "这是将被使用的视频编码器模块 (以及它被分配的选项)。"
+
+#: modules/stream_out/transcode/transcode.c:49
+msgid "Destination video codec"
+msgstr "目标视频编解码器"
+
+#: modules/stream_out/transcode/transcode.c:51
+msgid "This is the video codec that will be used."
+msgstr "这是将被视频的视频编解码器。"
+
+#: modules/stream_out/transcode/transcode.c:52
+#: share/lua/http/dialogs/create_stream.html:212
+msgid "Video bitrate"
+msgstr "视频位率"
+
+#: modules/stream_out/transcode/transcode.c:54
+msgid "Target bitrate of the transcoded video stream."
+msgstr "要转换的视频流的目标位率。"
+
+#: modules/stream_out/transcode/transcode.c:55
+msgid "Video scaling"
+msgstr "视频比例"
+
+#: modules/stream_out/transcode/transcode.c:57
+msgid "Scale factor to apply to the video while transcoding (eg: 0.25)"
+msgstr "在转码时应用到视频的比例因素 (eg: 0.25)"
+
+#: modules/stream_out/transcode/transcode.c:58
+msgid "Video frame-rate"
+msgstr "视频帧率"
+
+#: modules/stream_out/transcode/transcode.c:60
+msgid "Target output frame rate for the video stream."
+msgstr "视频流的目标输出帧率。"
+
+#: modules/stream_out/transcode/transcode.c:61
+msgid "Deinterlace video"
+msgstr "反交错视频"
+
+#: modules/stream_out/transcode/transcode.c:63
+msgid "Deinterlace the video before encoding."
+msgstr "在编码前反交错视频。"
+
+#: modules/stream_out/transcode/transcode.c:64
+msgid "Deinterlace module"
+msgstr "反交错模块"
+
+#: modules/stream_out/transcode/transcode.c:66
+msgid "Specify the deinterlace module to use."
+msgstr "指定要使用的反交错模式。"
+
+#: modules/stream_out/transcode/transcode.c:73
+msgid "Maximum video width"
+msgstr "最大视频宽度"
+
+#: modules/stream_out/transcode/transcode.c:75
+msgid "Maximum output video width."
+msgstr "最大输出视频宽度。"
+
+#: modules/stream_out/transcode/transcode.c:76
+msgid "Maximum video height"
+msgstr "最大视频高度"
+
+#: modules/stream_out/transcode/transcode.c:78
+msgid "Maximum output video height."
+msgstr "最大输出视频高度。"
+
+#: modules/stream_out/transcode/transcode.c:81
+msgid ""
+"Video filters will be applied to the video streams (after overlays are "
+"applied). You can enter a colon-separated list of filters."
+msgstr ""
+"将被应用到视频流的视频滤镜 (在应用覆盖层之后)。您可以输入一个冒号分隔的滤镜列"
+"表。"
+
+#: modules/stream_out/transcode/transcode.c:84
+msgid "Audio encoder"
+msgstr "音频编码器"
+
+#: modules/stream_out/transcode/transcode.c:86
+msgid ""
+"This is the audio encoder module that will be used (and its associated "
+"options)."
+msgstr "这是将被使用的音频编码器模块 (和它被分配的选项)。"
+
+#: modules/stream_out/transcode/transcode.c:88
+msgid "Destination audio codec"
+msgstr "目标音频编解码器"
+
+#: modules/stream_out/transcode/transcode.c:90
+msgid "This is the audio codec that will be used."
+msgstr "这是将要使用的音频编解码器。"
+
+#: modules/stream_out/transcode/transcode.c:91
+#: share/lua/http/dialogs/create_stream.html:231
+msgid "Audio bitrate"
+msgstr "音频位率"
+
+#: modules/stream_out/transcode/transcode.c:93
+msgid "Target bitrate of the transcoded audio stream."
+msgstr "要转码的音频流位率。"
+
+#: modules/stream_out/transcode/transcode.c:96
+msgid ""
+"Sample rate of the transcoded audio stream (11250, 22500, 44100 or 48000)."
+msgstr "要转码的音频流采样率 (11250, 22500, 44100 或 48000)。"
+
+#: modules/stream_out/transcode/transcode.c:99
+msgid "This is the language of the audio stream."
+msgstr "这是音频流的语言。"
+
+#: modules/stream_out/transcode/transcode.c:102
+msgid "Number of audio channels in the transcoded streams."
+msgstr "在转码流中的声道数。"
+
+#: modules/stream_out/transcode/transcode.c:103
+msgid "Audio filter"
+msgstr "音频滤镜"
+
+#: modules/stream_out/transcode/transcode.c:105
+msgid ""
+"Audio filters will be applied to the audio streams (after conversion filters "
+"are applied). You can enter a colon-separated list of filters."
+msgstr ""
+"将被应用到音频流的音频滤镜 (在转换滤镜被应用后)。您可以输入一个冒号分隔的滤镜"
+"列表。"
+
+#: modules/stream_out/transcode/transcode.c:108
+msgid "Subtitle encoder"
+msgstr "字幕编码器"
+
+#: modules/stream_out/transcode/transcode.c:110
+msgid ""
+"This is the subtitle encoder module that will be used (and its associated "
+"options)."
+msgstr "这是即将使用的字幕编码器模块 (及其相关选项)。"
+
+#: modules/stream_out/transcode/transcode.c:112
+msgid "Destination subtitle codec"
+msgstr "目标字幕编解码器"
+
+#: modules/stream_out/transcode/transcode.c:114
+msgid "This is the subtitle codec that will be used."
+msgstr "这是即将使用的字幕编解码器。"
+
+#: modules/stream_out/transcode/transcode.c:118
+msgid ""
+"This allows you to add overlays (also known as \"subpictures\" on the "
+"transcoded video stream. The subpictures produced by the filters will be "
+"overlayed directly onto the video. You can specify a colon-separated list of "
+"subpicture modules"
+msgstr ""
+"这将允许您在转码后的视频流上添加覆盖层 (也被叫做 \"子画面\")。由滤镜生成的子"
+"画面将直接覆盖在视频上。您必须输入一个冒号分隔的子画面模块的列表"
+
+#: modules/stream_out/transcode/transcode.c:123
+msgid "OSD menu"
+msgstr "OSD 菜单"
+
+#: modules/stream_out/transcode/transcode.c:125
+msgid ""
+"Stream the On Screen Display menu (using the osdmenu subpicture module)."
+msgstr "流式化屏幕显示菜单 (使用 osd 菜单子画面模块)。"
+
+#: modules/stream_out/transcode/transcode.c:127
+msgid "Number of threads"
+msgstr "线程数量"
+
+#: modules/stream_out/transcode/transcode.c:129
+msgid "Number of threads used for the transcoding."
+msgstr "用于转码的线程数量。"
+
+#: modules/stream_out/transcode/transcode.c:130
+msgid "High priority"
+msgstr "高优先级"
+
+#: modules/stream_out/transcode/transcode.c:132
+msgid ""
+"Runs the optional encoder thread at the OUTPUT priority instead of VIDEO."
+msgstr "在输出优先级上运行可选的编码器线程代替视频。"
+
+#: modules/stream_out/transcode/transcode.c:148
+msgid "Transcode stream output"
+msgstr "转码流输出"
+
+#: modules/stream_out/transcode/transcode.c:202
+msgid "Overlays/Subtitles"
+msgstr "覆盖/字幕输出"
+
+#: modules/text_renderer/freetype.c:96
+msgid "Monospace Font"
+msgstr "等宽字体"
+
+#: modules/text_renderer/freetype.c:98
+msgid "Font family for the font you want to use"
+msgstr "您要使用字体的字体集"
+
+#: modules/text_renderer/freetype.c:99
+msgid "Font file for the font you want to use"
+msgstr "您所要使用字体的字体文件"
+
+#: modules/text_renderer/freetype.c:101 modules/text_renderer/win32text.c:61
+msgid "Font size in pixels"
+msgstr "以像素为单位的字体大小"
+
+#: modules/text_renderer/freetype.c:102 modules/text_renderer/win32text.c:62
+msgid ""
+"This is the default size of the fonts that will be rendered on the video. If "
+"set to something different than 0 this option will override the relative "
+"font size."
+msgstr ""
+"这是将会在视频上渲染的默认字体大小。如果设置任意不等于 0 的值就将会覆盖相对字"
+"体大小。"
+
+#: modules/text_renderer/freetype.c:106
+msgid "Text opacity"
+msgstr "文本不透明度"
+
+#: modules/text_renderer/freetype.c:107 modules/text_renderer/win32text.c:67
+msgid ""
+"The opacity (inverse of transparency) of the text that will be rendered on "
+"the video. 0 = transparent, 255 = totally opaque. "
+msgstr ""
+"将要在视频上渲染的文本不透明度 (相对于透明度)。0 = 透明、255 = 完全不透明。"
+
+#: modules/text_renderer/freetype.c:110 modules/text_renderer/quartztext.c:98
+#: modules/text_renderer/win32text.c:70
+msgid "Text default color"
+msgstr "文本默认色彩"
+
+#: modules/text_renderer/freetype.c:111 modules/text_renderer/quartztext.c:99
+#: modules/text_renderer/win32text.c:71
+msgid ""
+"The color of the text that will be rendered on the video. This must be an "
+"hexadecimal (like HTML colors). The first two chars are for red, then green, "
+"then blue. #000000 = black, #FF0000 = red, #00FF00 = green, #FFFF00 = yellow "
+"(red + green), #FFFFFF = white"
+msgstr ""
+"要视频上渲染的文本颜色。这必须是一个十六进制值 (类似 HTML 颜色)。前两个字节是"
+"红，然后是绿、蓝。#000000 = 黑、#FF0000 = 红、#00FF00 = 绿、#FFFF00 = 黄 (红 "
+"+ 绿)、#FFFFFF = 白"
+
+#: modules/text_renderer/freetype.c:115 modules/text_renderer/quartztext.c:94
+#: modules/text_renderer/win32text.c:75
+msgid "Relative font size"
+msgstr "相对字体大小"
+
+#: modules/text_renderer/freetype.c:116 modules/text_renderer/quartztext.c:95
+#: modules/text_renderer/win32text.c:76
+msgid ""
+"This is the relative default size of the fonts that will be rendered on the "
+"video. If absolute font size is set, relative size will be overridden."
+msgstr ""
+"这是一个将被在视频上渲染的默认的相对字体大小。如果设置了绝对字体大小，相对大"
+"小将被覆盖。"
+
+#: modules/text_renderer/freetype.c:121
+msgid "Background opacity"
+msgstr "背景不透明度"
+
+#: modules/text_renderer/freetype.c:122
+msgid "Background color"
+msgstr "背景颜色"
+
+#: modules/text_renderer/freetype.c:124
+msgid "Outline opacity"
+msgstr "轮廓不透明度"
+
+#: modules/text_renderer/freetype.c:128
+msgid "Shadow opacity"
+msgstr "阴影不透明度"
+
+#: modules/text_renderer/freetype.c:129
+msgid "Shadow color"
+msgstr "阴影颜色"
+
+#: modules/text_renderer/freetype.c:130
+msgid "Shadow angle"
+msgstr "阴影角度"
+
+#: modules/text_renderer/freetype.c:131
+msgid "Shadow distance"
+msgstr "阴影距离"
+
+#: modules/text_renderer/freetype.c:136 modules/text_renderer/quartztext.c:121
+#: modules/text_renderer/win32text.c:82
+msgid "Smaller"
+msgstr "较小"
+
+#: modules/text_renderer/freetype.c:136 modules/text_renderer/quartztext.c:121
+#: modules/text_renderer/win32text.c:82
+msgid "Small"
+msgstr "小"
+
+#: modules/text_renderer/freetype.c:136 modules/text_renderer/quartztext.c:121
+#: modules/text_renderer/win32text.c:82
+msgid "Large"
+msgstr "大"
+
+#: modules/text_renderer/freetype.c:136 modules/text_renderer/quartztext.c:121
+#: modules/text_renderer/win32text.c:82
+msgid "Larger"
+msgstr "较大"
+
+#: modules/text_renderer/freetype.c:137
+msgid "Use YUVP renderer"
+msgstr "使用 YUVP 渲染器"
+
+#: modules/text_renderer/freetype.c:138
+msgid ""
+"This renders the font using \"paletized YUV\". This option is only needed if "
+"you want to encode into DVB subtitles"
+msgstr "此渲染器字体使用 \"苍白的 YUV\"。此选项仅在您要编码到 DVB 字幕时才需要"
+
+#: modules/text_renderer/freetype.c:155
+msgid "Thin"
+msgstr "浅"
+
+#: modules/text_renderer/freetype.c:155
+msgid "Thick"
+msgstr "深"
+
+#: modules/text_renderer/freetype.c:159 modules/text_renderer/win32text.c:94
+msgid "Text renderer"
+msgstr "文本渲染器"
+
+#: modules/text_renderer/freetype.c:160
+msgid "Freetype2 font renderer"
+msgstr "Freetype2 字体渲染器"
+
+#: modules/text_renderer/quartztext.c:93
+msgid "Name for the font you want to use"
+msgstr "您要使用的字体名称"
+
+#: modules/text_renderer/quartztext.c:124
+msgid "Text renderer for Mac"
+msgstr "Mac 平台文本渲染器"
+
+#: modules/text_renderer/quartztext.c:125
+msgid "CoreText font renderer"
+msgstr "CoreText 字体渲染器"
+
+#: modules/text_renderer/svg.c:61
+msgid "SVG template file"
+msgstr "SVG 模板文件"
+
+#: modules/text_renderer/svg.c:62
+msgid ""
+"Location of a file holding a SVG template for automatic string conversion"
+msgstr "用于自动字串转换处理的 SVN 模板文件路径"
+
+#: modules/text_renderer/tdummy.c:36
+msgid "Dummy font renderer"
+msgstr "空字体渲染器"
+
+#: modules/text_renderer/win32text.c:60
+msgid "Filename for the font you want to use"
+msgstr "您要使用的字体文件名"
+
+#: modules/text_renderer/win32text.c:95
+msgid "Win32 font renderer"
+msgstr "Win32 字体渲染器"
+
+#: modules/video_chroma/chain.c:43
+msgid "Video filtering using a chain of video filter modules"
+msgstr "使用一个链式视频滤镜模块过滤视频"
+
+#: modules/video_chroma/grey_yuv.c:54 modules/video_chroma/i420_yuy2.c:93
+#: modules/video_chroma/i422_i420.c:56 modules/video_chroma/i422_yuy2.c:72
+#: modules/video_chroma/yuy2_i420.c:58 modules/video_chroma/yuy2_i422.c:57
+msgid "Conversions from "
+msgstr "转换从"
+
+#: modules/video_chroma/i420_rgb.c:78
+msgid "SSE2 I420,IYUV,YV12 to RV15,RV16,RV24,RV32 conversions"
+msgstr "SSE2 I420,IYUV,YV12 到 RV15,RV16,RV24,RV32 转换"
+
+#: modules/video_chroma/i420_rgb.c:83
+msgid "MMX I420,IYUV,YV12 to RV15,RV16,RV24,RV32 conversions"
+msgstr "MMX I420,IYUV,YV12 到 RV15,RV16,RV24,RV32 转换"
+
+#: modules/video_chroma/i420_rgb.c:88
+msgid "I420,IYUV,YV12 to RGB2,RV15,RV16,RV24,RV32 conversions"
+msgstr "I420,IYUV,YV12 到 RGB2,RV15,RV16,RV24,RV32 转换"
+
+#: modules/video_chroma/i420_yuy2.c:97 modules/video_chroma/i422_yuy2.c:77
+msgid "MMX conversions from "
+msgstr "MMX 转换从"
+
+#: modules/video_chroma/i420_yuy2.c:101 modules/video_chroma/i422_yuy2.c:82
+msgid "SSE2 conversions from "
+msgstr "SSE2 转换从"
+
+#: modules/video_chroma/i420_yuy2.c:106
+msgid "AltiVec conversions from "
+msgstr "AltiVec 转换从"
+
+#: modules/video_chroma/omxdl.c:35
+msgid "OpenMAX DL image processing"
+msgstr "OpenMAX DL 图像处理"
+
+#: modules/video_chroma/rv32.c:45
+msgid "RV32 conversion filter"
+msgstr "RV32 转换滤镜"
+
+#: modules/video_chroma/swscale.c:56
+msgid "Scaling mode"
+msgstr "缩放模式"
+
+#: modules/video_chroma/swscale.c:57
+msgid "Scaling mode to use."
+msgstr "要使用的缩放模式。"
+
+#: modules/video_chroma/swscale.c:61
+msgid "Fast bilinear"
+msgstr "快速双线性"
+
+#: modules/video_chroma/swscale.c:61
+msgid "Bilinear"
+msgstr "双线性"
+
+#: modules/video_chroma/swscale.c:61
+msgid "Bicubic (good quality)"
+msgstr "双三次 (较好的质量)"
+
+#: modules/video_chroma/swscale.c:62
+msgid "Experimental"
+msgstr "实验性"
+
+#: modules/video_chroma/swscale.c:62
+msgid "Nearest neighbour (bad quality)"
+msgstr "最近邻 (质量较差)"
+
+#: modules/video_chroma/swscale.c:63
+msgid "Area"
+msgstr "区域"
+
+#: modules/video_chroma/swscale.c:63
+msgid "Luma bicubic / chroma bilinear"
+msgstr "彩度双三次 / 色度双线性"
+
+#: modules/video_chroma/swscale.c:63
+msgid "Gauss"
+msgstr "高斯"
+
+#: modules/video_chroma/swscale.c:64
+msgid "SincR"
+msgstr "SincR"
+
+#: modules/video_chroma/swscale.c:64
+msgid "Lanczos"
+msgstr "兰兹"
+
+#: modules/video_chroma/swscale.c:64
+msgid "Bicubic spline"
+msgstr "双三次线条"
+
+#: modules/video_chroma/swscale.c:67 modules/video_filter/scale.c:47
+msgid "Video scaling filter"
+msgstr "视频比例滤镜"
+
+#: modules/video_chroma/swscale.c:68
+msgid "Swscale"
+msgstr "软件缩放"
+
+#: modules/video_filter/adjust.c:66
+msgid "Brightness threshold"
+msgstr "亮度阈值"
+
+#: modules/video_filter/adjust.c:67
+msgid ""
+"When this mode is enabled, pixels will be shown as black or white. The "
+"threshold value will be the brightness defined below."
+msgstr "启用此模式时，像素将被显示为黑色和白色。阈值将使用下面定义的亮度。"
+
+#: modules/video_filter/adjust.c:70
+msgid "Image contrast (0-2)"
+msgstr "图像对比度 (0-2)"
+
+#: modules/video_filter/adjust.c:71
+msgid "Set the image contrast, between 0 and 2. Defaults to 1."
+msgstr "设置图像对比度, 在 0 和 2 之间。默认为 1。"
+
+#: modules/video_filter/adjust.c:72
+msgid "Image hue (0-360)"
+msgstr "图像色调 (0-360)"
+
+#: modules/video_filter/adjust.c:73
+msgid "Set the image hue, between 0 and 360. Defaults to 0."
+msgstr "设置图像色调, 在 0 和 360 之间。默认为 0。"
+
+#: modules/video_filter/adjust.c:74
+msgid "Image saturation (0-3)"
+msgstr "图像饱和度 (0-3)"
+
+#: modules/video_filter/adjust.c:75
+msgid "Set the image saturation, between 0 and 3. Defaults to 1."
+msgstr "设置图像饱和度, 在 0 和 3 之间。默认为 1。"
+
+#: modules/video_filter/adjust.c:76
+msgid "Image brightness (0-2)"
+msgstr "图像亮度 (0-2)"
+
+#: modules/video_filter/adjust.c:77
+msgid "Set the image brightness, between 0 and 2. Defaults to 1."
+msgstr "设置图像亮度, 在 0 和 2 之间。默认为 1。"
+
+#: modules/video_filter/adjust.c:78
+msgid "Image gamma (0-10)"
+msgstr "图像色度 (0-10)"
+
+#: modules/video_filter/adjust.c:79
+msgid "Set the image gamma, between 0.01 and 10. Defaults to 1."
+msgstr "设置图像色度，在 0.01 和 10 之间。默认为 1。"
+
+#: modules/video_filter/adjust.c:82
+msgid "Image properties filter"
+msgstr "图像属性滤镜"
+
+#: modules/video_filter/adjust.c:83 modules/gui/qt4/ui/video_effects.h:1392
+msgid "Image adjust"
+msgstr "调节图像"
+
+#: modules/video_filter/alphamask.c:40
+msgid "Use an image's alpha channel as a transparency mask."
+msgstr "使用图像的 alpha 通道作为透明掩码。"
+
+#: modules/video_filter/alphamask.c:42
+msgid "Transparency mask"
+msgstr "透明掩码"
+
+#: modules/video_filter/alphamask.c:44
+msgid "Alpha blending transparency mask. Uses a png alpha channel."
+msgstr "Alpha 混合透明掩码。使用一个 png alpha 通道。"
+
+#: modules/video_filter/alphamask.c:63
+msgid "Alpha mask video filter"
+msgstr "Alpha 掩码视频滤镜"
+
+#: modules/video_filter/alphamask.c:64
+msgid "Alpha mask"
+msgstr "Alpha 掩码"
+
+#: modules/video_filter/anaglyph.c:39
+msgid "Color scheme"
+msgstr "色彩方案"
+
+#: modules/video_filter/anaglyph.c:40
+msgid "Define the glasses' color scheme"
+msgstr "定义眼镜的色彩方案"
+
+#: modules/video_filter/anaglyph.c:72
+msgid "Convert 3D picture to anaglyph image video filter"
+msgstr "将 3D 画面转换为立体图像的视频滤镜"
+
+#: modules/video_filter/antiflicker.c:50
+msgid "Window size"
+msgstr "窗口尺寸"
+
+#: modules/video_filter/antiflicker.c:51
+msgid "Number of frames (0 to 100)"
+msgstr "帧数 (0 到 100)"
+
+#: modules/video_filter/antiflicker.c:53
+msgid "Softening value"
+msgstr "柔化值"
+
+#: modules/video_filter/antiflicker.c:54
+msgid "Number of frames consider for smoothening (0 to 30)"
+msgstr "平滑处理帧数 (0 到 30)"
+
+#: modules/video_filter/antiflicker.c:66
+msgid "antiflicker video filter"
+msgstr "antiflicker 视频滤镜"
+
+#: modules/video_filter/antiflicker.c:67
+msgid "antiflicker"
+msgstr "antiflicker"
+
+#: modules/video_filter/atmo/atmo.cpp:116
+msgid ""
+"This module allows controlling an so called AtmoLight device connected to "
+"your computer.\n"
+"AtmoLight is the homegrown version of what Philips calls AmbiLight.\n"
+"If you need further information feel free to visit us at\n"
+"\n"
+"http://www.vdr-wiki.de/wiki/index.php/Atmo-plugin\n"
+"http://www.vdr-wiki.de/wiki/index.php/AtmoWin\n"
+"\n"
+"You can find there detailed descriptions on how to build it for yourself and "
+"where to get the required parts.\n"
+"You can also have a look at pictures and some movies showing such a device "
+"in live action."
+msgstr ""
+"此模块允许控制一个被称为 AtmoLight 的设备连接到您的计算机。\n"
+"AtmoLight 是一个飞利浦称作 AmbiLight 的自制版本。\n"
+"如果您需要更多信息敬请访问\n"
+"\n"
+"http://www.vdr-wiki.de/wiki/index.php/Atmo-plugin\n"
+"http://www.vdr-wiki.de/wiki/index.php/AtmoWin\n"
+"\n"
+"您可以在那里找到如何自己编译它以及在哪里获取所需的模块的详细说明。\n"
+"您也可以看到设备实时操作时的照片和一些视频。"
+
+#: modules/video_filter/atmo/atmo.cpp:127
+msgid "Device type"
+msgstr "设备类型"
+
+#: modules/video_filter/atmo/atmo.cpp:128
+msgid ""
+"Choose your preferred hardware from the list, or choose AtmoWin Software to "
+"delegate processing to the external process - with more options"
+msgstr ""
+"从列表中选择您更偏好的硬件，或选择通过 AtmoWin 软件将处理托付给外部进程——将有"
+"更多可用选项"
+
+#: modules/video_filter/atmo/atmo.cpp:145
+msgid "AtmoWin Software"
+msgstr "AtmoWin 软件"
+
+#: modules/video_filter/atmo/atmo.cpp:147
+msgid "Classic AtmoLight"
+msgstr "经典 AtmoLight"
+
+#: modules/video_filter/atmo/atmo.cpp:148
+msgid "Quattro AtmoLight"
+msgstr "Quattro AtmoLight"
+
+#: modules/video_filter/atmo/atmo.cpp:149
+msgid "DMX"
+msgstr "DMX"
+
+#: modules/video_filter/atmo/atmo.cpp:150
+msgid "MoMoLight"
+msgstr "MoMoLight"
+
+#: modules/video_filter/atmo/atmo.cpp:151
+msgid "fnordlicht"
+msgstr "fnordlicht"
+
+#: modules/video_filter/atmo/atmo.cpp:154
+msgid "Count of AtmoLight channels"
+msgstr "AtmoLight 频道数"
+
+#: modules/video_filter/atmo/atmo.cpp:155
+msgid "How many AtmoLight channels, should be emulated with that DMX device"
+msgstr "AtmoLight 有多少频道，应与 DMX 设备相仿"
+
+#: modules/video_filter/atmo/atmo.cpp:157
+msgid "DMX address for each channel"
+msgstr "各频道的 DMX 地址"
+
+#: modules/video_filter/atmo/atmo.cpp:158
+msgid ""
+"Define here the DMX base address for each channel use , or ; to separate the "
+"values"
+msgstr "在此定义各频道使用的 DMX 基地址，使用 , 或 ; 分隔数值"
+
+#: modules/video_filter/atmo/atmo.cpp:161
+msgid "Count of channels"
+msgstr "频道数"
+
+#: modules/video_filter/atmo/atmo.cpp:162
+msgid "Depending on your MoMoLight hardware choose 3 or 4 channels"
+msgstr "根据您的 MoMoLight 硬件选择 3 或 4 个频道"
+
+#: modules/video_filter/atmo/atmo.cpp:165
+msgid "Count of fnordlicht's"
+msgstr "fnordlicht 数目"
+
+#: modules/video_filter/atmo/atmo.cpp:166
+msgid ""
+"Depending on the amount your fnordlicht hardware choose 1 to 254 channels"
+msgstr "根据您的 fnordlicht 硬件数选择 1 至 254 个频道"
+
+#: modules/video_filter/atmo/atmo.cpp:177
+msgid "Save Debug Frames"
+msgstr "保存调试帧"
+
+#: modules/video_filter/atmo/atmo.cpp:178
+msgid "Write every 128th miniframe to a folder."
+msgstr "每 128 个 mini 帧写入到一个文件夹中一次。"
+
+#: modules/video_filter/atmo/atmo.cpp:179
+msgid "Debug Frame Folder"
+msgstr "调试帧文件夹"
+
+#: modules/video_filter/atmo/atmo.cpp:180
+msgid "The path where the debugframes should be saved"
+msgstr "调试帧要保存的路径"
+
+#: modules/video_filter/atmo/atmo.cpp:184
+msgid "Extracted Image Width"
+msgstr "释放图像宽度"
+
+#: modules/video_filter/atmo/atmo.cpp:185
+msgid "The width of the mini image for further processing (64 is default)"
+msgstr "用于加速处理的 mini 图像宽度 (默认是 64)"
+
+#: modules/video_filter/atmo/atmo.cpp:188
+msgid "Extracted Image Height"
+msgstr "释放图像高度"
+
+#: modules/video_filter/atmo/atmo.cpp:189
+msgid "The height of the mini image for further processing (48 is default)"
+msgstr "用于加速处理的 mini 图像高度 (默认是 48)"
+
+#: modules/video_filter/atmo/atmo.cpp:192
+msgid "Mark analyzed pixels"
+msgstr "标记已分析像素"
+
+#: modules/video_filter/atmo/atmo.cpp:193
+msgid "makes the sample grid visible on screen as white pixels"
+msgstr "使示例方格以白色格线显示在屏幕上"
+
+#: modules/video_filter/atmo/atmo.cpp:196
+msgid "Color when paused"
+msgstr "暂停时的色彩"
+
+#: modules/video_filter/atmo/atmo.cpp:197
+msgid ""
+"Set the color to show if the user pauses the video. (Have light to get "
+"another beer?)"
+msgstr "在用于暂停时的色彩 (亮得足够拿瓶啤酒?)"
+
+#: modules/video_filter/atmo/atmo.cpp:200
+msgid "Pause-Red"
+msgstr "暂停红"
+
+#: modules/video_filter/atmo/atmo.cpp:201
+msgid "Red component of the pause color"
+msgstr "暂停颜色的红成分"
+
+#: modules/video_filter/atmo/atmo.cpp:202
+msgid "Pause-Green"
+msgstr "暂停率"
+
+#: modules/video_filter/atmo/atmo.cpp:203
+msgid "Green component of the pause color"
+msgstr "暂停颜色的绿成分"
+
+#: modules/video_filter/atmo/atmo.cpp:204
+msgid "Pause-Blue"
+msgstr "暂停蓝"
+
+#: modules/video_filter/atmo/atmo.cpp:205
+msgid "Blue component of the pause color"
+msgstr "暂停颜色的蓝成分"
+
+#: modules/video_filter/atmo/atmo.cpp:206
+msgid "Pause-Fadesteps"
+msgstr "暂停淡入步骤"
+
+#: modules/video_filter/atmo/atmo.cpp:207
+msgid ""
+"Number of steps to change current color to pause color (each step takes 40ms)"
+msgstr "更改当前颜色为暂停颜色的步骤数量 (每步骤需要 40 毫秒)"
+
+#: modules/video_filter/atmo/atmo.cpp:210
+msgid "End-Red"
+msgstr "结束红"
+
+#: modules/video_filter/atmo/atmo.cpp:211
+msgid "Red component of the shutdown color"
+msgstr "结束颜色的红色成分"
+
+#: modules/video_filter/atmo/atmo.cpp:212
+msgid "End-Green"
+msgstr "结束绿"
+
+#: modules/video_filter/atmo/atmo.cpp:213
+msgid "Green component of the shutdown color"
+msgstr "结束颜色的绿色成分"
+
+#: modules/video_filter/atmo/atmo.cpp:214
+msgid "End-Blue"
+msgstr "结束蓝"
+
+#: modules/video_filter/atmo/atmo.cpp:215
+msgid "Blue component of the shutdown color"
+msgstr "结束颜色的蓝色成分"
+
+#: modules/video_filter/atmo/atmo.cpp:216
+msgid "End-Fadesteps"
+msgstr "结束淡入步骤"
+
+#: modules/video_filter/atmo/atmo.cpp:217
+msgid ""
+"Number of steps to change current color to end color for dimming up the "
+"light in cinema style... (each step takes 40ms)"
+msgstr ""
+"更改当前颜色为暂停颜色用于逐渐增强亮度的影院类型的步骤数量 (每步骤需要 40 毫"
+"秒)"
+
+#: modules/video_filter/atmo/atmo.cpp:221
+msgid "Number of zones on top"
+msgstr "顶部通道数"
+
+#: modules/video_filter/atmo/atmo.cpp:222
+msgid "Number of zones on the top of the screen"
+msgstr "屏幕顶部通道数"
+
+#: modules/video_filter/atmo/atmo.cpp:223
+msgid "Number of zones on bottom"
+msgstr "底部通道数"
+
+#: modules/video_filter/atmo/atmo.cpp:224
+msgid "Number of zones on the bottom of the screen"
+msgstr "屏幕底部通道数"
+
+#: modules/video_filter/atmo/atmo.cpp:225
+msgid "Zones on left / right side"
+msgstr "左 / 右边的通道"
+
+#: modules/video_filter/atmo/atmo.cpp:226
+msgid "left and right side having always the same number of zones"
+msgstr "左右边总有相同数目的通道"
+
+#: modules/video_filter/atmo/atmo.cpp:228
+msgid "Calculate a average zone"
+msgstr "计算平均通道"
+
+#: modules/video_filter/atmo/atmo.cpp:229
+msgid ""
+"it contains the average of all pixels in the sample image (only useful for "
+"single channel AtmoLight)"
+msgstr "包含示例图像中所有像素的平均值 (仅当使用单频道的 AtmoLight 时有用)"
+
+#: modules/video_filter/atmo/atmo.cpp:234
+msgid "Use Software White adjust"
+msgstr "使用软件白调节"
+
+#: modules/video_filter/atmo/atmo.cpp:235
+msgid ""
+"Should the buildin driver do a white adjust or your LED stripes? recommend."
+msgstr "要使驱动进行白调节或您的 LED 块吗? 推荐。"
+
+#: modules/video_filter/atmo/atmo.cpp:237
+msgid "White Red"
+msgstr "白红"
+
+#: modules/video_filter/atmo/atmo.cpp:238
+msgid "Red value of a pure white on your LED stripes."
+msgstr "在您的 LED 块上的纯白的红值。"
+
+#: modules/video_filter/atmo/atmo.cpp:240
+msgid "White Green"
+msgstr "白绿"
+
+#: modules/video_filter/atmo/atmo.cpp:241
+msgid "Green value of a pure white on your LED stripes."
+msgstr "在您的 LED 块上的纯白的绿值。"
+
+#: modules/video_filter/atmo/atmo.cpp:243
+msgid "White Blue"
+msgstr "白蓝"
+
+#: modules/video_filter/atmo/atmo.cpp:244
+msgid "Blue value of a pure white on your LED stripes."
+msgstr "在您的 LED 块上的纯白的蓝值。"
+
+#: modules/video_filter/atmo/atmo.cpp:247
+msgid "Serial Port/Device"
+msgstr "串口/设备"
+
+#: modules/video_filter/atmo/atmo.cpp:248
+msgid ""
+"Name of the serial port where the AtmoLight controller is attached to.\n"
+"On Windows usually something like COM1 or COM2. On Linux /dev/ttyS01 f.e."
+msgstr ""
+"AtmoLight 控制器附属的序列端口的名称。\n"
+"在 Windows 通常使用 COM1 或 COM2。Linux 使用 /dev/ttyS01 f.e。"
+
+#: modules/video_filter/atmo/atmo.cpp:253
+#: modules/gui/qt4/ui/video_effects.h:1468
+msgid "Edge weightning"
+msgstr "边缘宽度"
+
+#: modules/video_filter/atmo/atmo.cpp:254
+msgid ""
+"Increasing this value will result in color more depending on the border of "
+"the frame."
+msgstr "增加此值将会决定帧的边框颜色。"
+
+#: modules/video_filter/atmo/atmo.cpp:257
+msgid "Overall brightness of your LED stripes"
+msgstr "您的 LED 块的总体亮度"
+
+#: modules/video_filter/atmo/atmo.cpp:258
+#: modules/gui/qt4/ui/video_effects.h:1471
+msgid "Darkness limit"
+msgstr "暗度限制"
+
+#: modules/video_filter/atmo/atmo.cpp:259
+msgid ""
+"Pixels with a saturation lower than this will be ignored. Should be greater "
+"than one for letterboxed videos."
+msgstr "低于此亮度值的响度将被忽略。应该大于一个信箱式播放视频。"
+
+#: modules/video_filter/atmo/atmo.cpp:262
+msgid "Hue windowing"
+msgstr "色调窗口"
+
+#: modules/video_filter/atmo/atmo.cpp:263
+#: modules/video_filter/atmo/atmo.cpp:265
+msgid "Used for statistics."
+msgstr "用于统计。"
+
+#: modules/video_filter/atmo/atmo.cpp:264
+msgid "Sat windowing"
+msgstr "亮度窗口"
+
+#: modules/video_filter/atmo/atmo.cpp:267
+#: modules/gui/qt4/ui/video_effects.h:1473
+msgid "Filter length (ms)"
+msgstr "过滤长度 (毫秒)"
+
+#: modules/video_filter/atmo/atmo.cpp:268
+msgid ""
+"Time it takes until a color is completely changed. This prevents flickering."
+msgstr "直到颜色完全变色的时间。这可以防止闪烁。"
+
+#: modules/video_filter/atmo/atmo.cpp:270
+msgid "Filter threshold"
+msgstr "过滤阈值"
+
+#: modules/video_filter/atmo/atmo.cpp:271
+msgid "How much a color has to be changed for an immediate color change."
+msgstr "用于一个立即更改的颜色数量。"
+
+#: modules/video_filter/atmo/atmo.cpp:273
+#: modules/gui/qt4/ui/video_effects.h:1475
+msgid "Filter smoothness (%)"
+msgstr "过滤平滑度 (%)"
+
+#: modules/video_filter/atmo/atmo.cpp:274
+msgid "Filter Smoothness"
+msgstr "平滑过滤"
+
+#: modules/video_filter/atmo/atmo.cpp:276
+msgid "Output Color filter mode"
+msgstr "输出颜色滤镜模块"
+
+#: modules/video_filter/atmo/atmo.cpp:277
+msgid ""
+"defines the how the output color should be calculated based on previous color"
+msgstr "定义应如何根据之前的色彩计算输出色彩"
+
+#: modules/video_filter/atmo/atmo.cpp:286
+msgid "No Filtering"
+msgstr "不过滤"
+
+#: modules/video_filter/atmo/atmo.cpp:287
+msgid "Combined"
+msgstr "混合"
+
+#: modules/video_filter/atmo/atmo.cpp:288
+msgid "Percent"
+msgstr "百分比"
+
+#: modules/video_filter/atmo/atmo.cpp:291
+msgid "Frame delay (ms)"
+msgstr "帧延迟 (ms)"
+
+#: modules/video_filter/atmo/atmo.cpp:292
+msgid ""
+"Helps to get the video output and the light effects in sync. Values around "
+"20ms should do the trick."
+msgstr "在同步时帮助获取视频输出和亮度效果。在 20 毫秒附近的值应该能成功。"
+
+#: modules/video_filter/atmo/atmo.cpp:297
+msgid "Channel 0: summary"
+msgstr "频道 0: 概要"
+
+#: modules/video_filter/atmo/atmo.cpp:298
+msgid "Channel 1: left"
+msgstr "频道 1: 左"
+
+#: modules/video_filter/atmo/atmo.cpp:299
+msgid "Channel 2: right"
+msgstr "频道 2: 右"
+
+#: modules/video_filter/atmo/atmo.cpp:300
+msgid "Channel 3: top"
+msgstr "频道 3: 上"
+
+#: modules/video_filter/atmo/atmo.cpp:301
+msgid "Channel 4: bottom"
+msgstr "频道 4: 下"
+
+#: modules/video_filter/atmo/atmo.cpp:303
+msgid "Maps the hardware channel X to logical zone Y to fix wrong wiring :-)"
+msgstr "映射硬件频道 X 到逻辑通道 Y 以修正错误的布线 :-)"
+
+#: modules/video_filter/atmo/atmo.cpp:314
+msgid "disabled"
+msgstr "关闭"
+
+#: modules/video_filter/atmo/atmo.cpp:315
+msgid "Zone 4:summary"
+msgstr "通道 4:总"
+
+#: modules/video_filter/atmo/atmo.cpp:316
+msgid "Zone 3:left"
+msgstr "通道 3:左"
+
+#: modules/video_filter/atmo/atmo.cpp:317
+msgid "Zone 1:right"
+msgstr "通道 1:右"
+
+#: modules/video_filter/atmo/atmo.cpp:318
+msgid "Zone 0:top"
+msgstr "通道 0:上"
+
+#: modules/video_filter/atmo/atmo.cpp:319
+msgid "Zone 2:bottom"
+msgstr "通道 2:下"
+
+#: modules/video_filter/atmo/atmo.cpp:321
+msgid "Channel / Zone Assignment"
+msgstr "频道 / 通道分配"
+
+#: modules/video_filter/atmo/atmo.cpp:322
+msgid ""
+"for devices with more than five channels / zones write down here for each "
+"channel the zone number to show and separate the values with , or ; and use "
+"-1 to not use some channels. For the classic AtmoLight the sequence "
+"4,3,1,0,2 would set the default channel/zone mapping. Having only two zones "
+"on top, and one zone on left and right and no summary zone the mapping for "
+"classic AtmoLight would be -1,3,2,1,0"
+msgstr ""
+"对于频道 / 通道多余五个的设备，在此写下各频道要显示的通道号并以 , 或 ; 分隔数"
+"值，使用 -1 禁用特定频道。对经典 AtmoLight 而言，序列 4,3,1,0,2 将设置成默认"
+"频道/通道映射。上面仅两通道，左边右边各一个，无总通道的经典 AtmoLight 映射为 "
+"-1,3,2,1,0"
+
+#: modules/video_filter/atmo/atmo.cpp:332
+msgid "Zone 0: Top gradient"
+msgstr "通道 0: 上梯度"
+
+#: modules/video_filter/atmo/atmo.cpp:333
+msgid "Zone 1: Right gradient"
+msgstr "通道 1: 右梯度"
+
+#: modules/video_filter/atmo/atmo.cpp:334
+msgid "Zone 2: Bottom gradient"
+msgstr "通道 2: 下梯度"
+
+#: modules/video_filter/atmo/atmo.cpp:335
+msgid "Zone 3: Left gradient"
+msgstr "通道 3: 左梯度"
+
+#: modules/video_filter/atmo/atmo.cpp:336
+msgid "Zone 4: Summary gradient"
+msgstr "通道 4: 总梯度"
+
+#: modules/video_filter/atmo/atmo.cpp:337
+msgid ""
+"Defines a small bitmap with 64x48 pixels, containing a grayscale gradient"
+msgstr "定义个 64x48 像素的小位图，包含灰度变化"
+
+#: modules/video_filter/atmo/atmo.cpp:340
+msgid "Gradient bitmap searchpath"
+msgstr "倾斜图像搜索路径"
+
+#: modules/video_filter/atmo/atmo.cpp:341
+msgid ""
+"Now preferred option to assign gradient bitmaps, put them as zone_0.bmp, "
+"zone_1.bmp etc. into one folder and set the foldername here"
+msgstr ""
+"这里是您偏爱的梯度位图分配选项，以类似 zone_0.bmp, zone_1.bmp 等等的文件名放"
+"入同一个文件夹中，并在此设定文件夹名"
+
+#: modules/video_filter/atmo/atmo.cpp:346
+msgid "Filename of AtmoWin*.exe"
+msgstr "AtmoWin*.exe 的文件名"
+
+#: modules/video_filter/atmo/atmo.cpp:347
+msgid ""
+"if you want the AtmoLight control software to be launched by VLC, enter the "
+"complete path of AtmoWinA.exe here."
+msgstr ""
+"如果您希望由 VLC 启动 AtmoLight 控制软件，请在这里输入完整的 AtmoWinA.exe 路"
+"径。"
+
+#: modules/video_filter/atmo/atmo.cpp:358
+msgid "AtmoLight Filter"
+msgstr "AtmoLight 滤镜"
+
+#: modules/video_filter/atmo/atmo.cpp:360
+#: modules/gui/qt4/ui/video_effects.h:1467
+#: modules/gui/qt4/ui/video_effects.h:1476
+msgid "AtmoLight"
+msgstr "AtmoLight"
+
+#: modules/video_filter/atmo/atmo.cpp:367
+msgid "Choose Devicetype and Connection"
+msgstr "选择设备类型与连接"
+
+#: modules/video_filter/atmo/atmo.cpp:392
+msgid "Illuminate the room with this color on pause"
+msgstr "在暂停时使用此颜色照亮房间"
+
+#: modules/video_filter/atmo/atmo.cpp:408
+msgid "Illuminate the room with this color on shutdown"
+msgstr "在关闭时使用此颜色照亮房间"
+
+#: modules/video_filter/atmo/atmo.cpp:419
+msgid "DMX options"
+msgstr "DMX 选项"
+
+#: modules/video_filter/atmo/atmo.cpp:425
+msgid "MoMoLight options"
+msgstr "MoMoLight 选项"
+
+#: modules/video_filter/atmo/atmo.cpp:432
+msgid "fnordlicht options"
+msgstr "fnordlicht 选项"
+
+#: modules/video_filter/atmo/atmo.cpp:474
+msgid "Zone Layout for the build-in Atmo"
+msgstr "内建 Atmo 的通道布局"
+
+#: modules/video_filter/atmo/atmo.cpp:490
+msgid "Settings for the built-in Live Video Processor only"
+msgstr "仅为内建的现场视频处理器设置"
+
+#: modules/video_filter/atmo/atmo.cpp:527
+msgid "Change channel assignment (fixes wrong wiring)"
+msgstr "更改信道分配 (修正错误的布线)"
+
+#: modules/video_filter/atmo/atmo.cpp:560
+msgid "Adjust the white light to your LED stripes"
+msgstr "为您的 LED 块调节白色照明"
+
+#: modules/video_filter/atmo/atmo.cpp:582
+msgid "Change gradients"
+msgstr "更改变化"
+
+#: modules/video_filter/audiobargraph_v.c:44 modules/video_filter/erase.c:58
+#: modules/video_filter/logo.c:58
+msgid "X coordinate"
+msgstr "X 坐标"
+
+#: modules/video_filter/audiobargraph_v.c:45
+msgid "X coordinate of the bargraph."
+msgstr "直方图的 X 坐标。"
+
+#: modules/video_filter/audiobargraph_v.c:46 modules/video_filter/erase.c:60
+#: modules/video_filter/logo.c:61
+msgid "Y coordinate"
+msgstr "Y 坐标"
+
+#: modules/video_filter/audiobargraph_v.c:47
+msgid "Y coordinate of the bargraph."
+msgstr "直方图的 Y 坐标。"
+
+#: modules/video_filter/audiobargraph_v.c:48
+msgid "Transparency of the bargraph"
+msgstr "直方图透明度"
+
+#: modules/video_filter/audiobargraph_v.c:49
+msgid ""
+"Bargraph transparency value (from 0 for full transparency to 255 for full "
+"opacity)."
+msgstr "直方图透明度值 (介于 0(完全透明) 与 255(完全不透明) 之间)。"
+
+#: modules/video_filter/audiobargraph_v.c:51
+msgid "Bargraph position"
+msgstr "直方图位置"
+
+#: modules/video_filter/audiobargraph_v.c:53
+msgid ""
+"Enforce the bargraph position on the video (0=center, 1=left, 2=right, "
+"4=top, 8=bottom, you can also use combinations of these values, eg 6 = top-"
+"right)."
+msgstr ""
+"强制指定视频上的标志位置 (0=居中、1=左、2=右、4=上、8=下，您也可以混合使用这"
+"些值，例如 6=4+2 表示右上)。"
+
+#: modules/video_filter/audiobargraph_v.c:56
+msgid "Bar width in pixel (default : 10)"
+msgstr "直方图宽度，单位为像素 (默认 : 10)"
+
+#: modules/video_filter/audiobargraph_v.c:57
+msgid ""
+"Width in pixel of each bar in the BarGraph to be displayed (default : 10)."
+msgstr "BarGraph 中显示各直方的宽度，单位为像素 (默认 : 10)。"
+
+#: modules/video_filter/audiobargraph_v.c:78
+#: modules/video_filter/audiobargraph_v.c:96
+msgid "Audio Bar Graph Video sub source"
+msgstr "音频直方图视频子滤镜"
+
+#: modules/video_filter/audiobargraph_v.c:79
+msgid "Audio Bar Graph Video"
+msgstr "音频直方图视频"
+
+#: modules/video_filter/ball.c:98
+msgid "Ball color"
+msgstr "球的颜色"
+
+#: modules/video_filter/ball.c:100
+msgid "Edge visible"
+msgstr "边界可见性"
+
+#: modules/video_filter/ball.c:101
+msgid "Set edge visibility."
+msgstr "设置边界可见度。"
+
+#: modules/video_filter/ball.c:103
+msgid "Ball speed"
+msgstr "球速"
+
+#: modules/video_filter/ball.c:104
+msgid ""
+"Set ball speed, the displacement value in "
+"number of pixels by frame."
+msgstr "设置球速，位移值即每帧移动像素数。"
+
+#: modules/video_filter/ball.c:107
+msgid "Ball size"
+msgstr "球的尺寸"
+
+#: modules/video_filter/ball.c:108
+msgid ""
+"Set ball size giving its radius in number of "
+"pixels"
+msgstr "设置球的尺寸，其半径的像素数"
+
+#: modules/video_filter/ball.c:111
+msgid "Gradient threshold"
+msgstr "梯度阈值"
+
+#: modules/video_filter/ball.c:112
+msgid "Set gradient threshold for edge computation."
+msgstr "设置边界计算的梯度阈值。"
+
+#: modules/video_filter/ball.c:114
+msgid "Augmented reality ball game"
+msgstr "增强现实球游戏"
+
+#: modules/video_filter/ball.c:123
+msgid "Ball video filter"
+msgstr "球视频滤镜"
+
+#: modules/video_filter/ball.c:124
+msgid "Ball"
+msgstr "球"
+
+#: modules/video_filter/blendbench.c:52
+msgid "Number of time to blend"
+msgstr "要混合的时间编号"
+
+#: modules/video_filter/blendbench.c:53
+msgid "The number of time the blend will be performed"
+msgstr "将要执行混合的时间编号"
+
+#: modules/video_filter/blendbench.c:55
+msgid "Alpha of the blended image"
+msgstr "混合图像的 Alpha 值"
+
+#: modules/video_filter/blendbench.c:56
+msgid "Alpha with which the blend image is blended"
+msgstr "要混合图像的 Alpha 值"
+
+#: modules/video_filter/blendbench.c:58
+msgid "Image to be blended onto"
+msgstr "要混合的图像"
+
+#: modules/video_filter/blendbench.c:59
+msgid "The image which will be used to blend onto"
+msgstr "将被混合的图像"
+
+#: modules/video_filter/blendbench.c:61
+msgid "Chroma for the base image"
+msgstr "基础图像的色度"
+
+#: modules/video_filter/blendbench.c:62
+msgid "Chroma which the base image will be loaded in"
+msgstr "将被载入的基础图像色度"
+
+#: modules/video_filter/blendbench.c:64
+msgid "Image which will be blended"
+msgstr "将被混合的图像"
+
+#: modules/video_filter/blendbench.c:65
+msgid "The image blended onto the base image"
+msgstr "将被混合到基础图像的图像"
+
+#: modules/video_filter/blendbench.c:67
+msgid "Chroma for the blend image"
+msgstr "混合图像的色度"
+
+#: modules/video_filter/blendbench.c:68
+msgid "Chroma which the blend image will be loaded in"
+msgstr "将被载入的混合图像色度"
+
+#: modules/video_filter/blendbench.c:74
+msgid "Blending benchmark filter"
+msgstr "混合基准滤镜"
+
+#: modules/video_filter/blendbench.c:75
+msgid "Blendbench"
+msgstr "混合基准"
+
+#: modules/video_filter/blendbench.c:80
+msgid "Benchmarking"
+msgstr "基准"
+
+#: modules/video_filter/blendbench.c:86
+msgid "Base image"
+msgstr "基础图像"
+
+#: modules/video_filter/blendbench.c:92
+msgid "Blend image"
+msgstr "混合图像"
+
+#: modules/video_filter/blend.cpp:44
+msgid "Video pictures blending"
+msgstr "视频图片混合"
+
+#: modules/video_filter/bluescreen.c:37
+msgid ""
+"This effect, also known as \"greenscreen\" or \"chroma key\" blends the "
+"\"blue parts\" of the foreground image of the mosaic on the background (like "
+"weather forecasts). You can choose the \"key\" color for blending (blue by "
+"default)."
+msgstr ""
+"此效果，又称为 \"绿屏\" 或 \"关键色度\" 在背景上混合 \"蓝色部分\" 的 mosaic "
+"图像前景 (类似于天气预报)。您可以为混合选择 \"关键\" 色彩 (默认为蓝色)。 "
+
+#: modules/video_filter/bluescreen.c:42
+msgid "Bluescreen U value"
+msgstr "蓝屏 U 值"
+
+#: modules/video_filter/bluescreen.c:44
+msgid ""
+"\"U\" value for the bluescreen key color (in YUV values). From 0 to 255. "
+"Defaults to 120 for blue."
+msgstr "蓝屏关键色 (以 YUV 值) 的 \"U\" 值。从 0 到 255。默认是 120 为蓝。"
+
+#: modules/video_filter/bluescreen.c:46
+msgid "Bluescreen V value"
+msgstr "蓝屏 V 值"
+
+#: modules/video_filter/bluescreen.c:48
+msgid ""
+"\"V\" value for the bluescreen key color (in YUV values). From 0 to 255. "
+"Defaults to 90 for blue."
+msgstr "蓝屏关键色 (以 YUV 值) 的 \"V\" 值。从 0 到 255。默认是 90 为蓝。"
+
+#: modules/video_filter/bluescreen.c:50
+msgid "Bluescreen U tolerance"
+msgstr "蓝屏 U 阈值"
+
+#: modules/video_filter/bluescreen.c:52
+msgid ""
+"Tolerance of the bluescreen blender on color variations for the U plane. A "
+"value between 10 and 20 seems sensible."
+msgstr "用于 U 平面的蓝屏混合器色调变化阈值。值在 10 到 20 看上去比较明智。"
+
+#: modules/video_filter/bluescreen.c:55
+msgid "Bluescreen V tolerance"
+msgstr "蓝屏 V 阈值"
+
+#: modules/video_filter/bluescreen.c:57
+msgid ""
+"Tolerance of the bluescreen blender on color variations for the V plane. A "
+"value between 10 and 20 seems sensible."
+msgstr "用于 V 平面的蓝屏混合器色调变化阈值。值在 10 到 20 看上去比较明智。"
+
+#: modules/video_filter/bluescreen.c:77
+msgid "Bluescreen video filter"
+msgstr "蓝屏视频滤镜"
+
+#: modules/video_filter/bluescreen.c:78
+msgid "Bluescreen"
+msgstr "蓝屏"
+
+#: modules/video_filter/canvas.c:83
+msgid "Output width"
+msgstr "输出宽度"
+
+#: modules/video_filter/canvas.c:85
+msgid "Output (canvas) image width"
+msgstr "输出 (canvas) 图像宽度"
+
+#: modules/video_filter/canvas.c:86
+msgid "Output height"
+msgstr "输出高度"
+
+#: modules/video_filter/canvas.c:88
+msgid "Output (canvas) image height"
+msgstr "输出 (canvas) 图像高度"
+
+#: modules/video_filter/canvas.c:89
+msgid "Output picture aspect ratio"
+msgstr "输出图像宽高比"
+
+#: modules/video_filter/canvas.c:91
+msgid ""
+"Set the canvas' picture aspect ratio. If omitted, the canvas is assumed to "
+"have the same SAR as the input."
+msgstr ""
+"设置 canvas 的画面宽高比。如果留空，canvas 将假定 SAR 与输入画面的相同。"
+
+#: modules/video_filter/canvas.c:93
+msgid "Pad video"
+msgstr "视频加边"
+
+#: modules/video_filter/canvas.c:95
+msgid ""
+"If enabled, video will be padded to fit in canvas after scaling. Otherwise, "
+"video will be cropped to fix in canvas after scaling."
+msgstr ""
+"如果启用，视频将经度量加边以适应 canvas。否则，视频将经度量裁剪以适应 "
+"canvas。"
+
+#: modules/video_filter/canvas.c:97
+msgid "Automatically resize and pad a video"
+msgstr "自动调整大小并为视频加边"
+
+#: modules/video_filter/canvas.c:105
+msgid "Canvas"
+msgstr "Canvas"
+
+#: modules/video_filter/canvas.c:106
+msgid "Canvas video filter"
+msgstr "Canvas 视频滤镜"
+
+#: modules/video_filter/colorthres.c:55
+msgid ""
+"Colors similar to this will be kept, others will be grayscaled. This must be "
+"an hexadecimal (like HTML colors). The first two chars are for red, then "
+"green, then blue. #000000 = black, #FF0000 = red, #00FF00 = green, #FFFF00 = "
+"yellow (red + green), #FFFFFF = white"
+msgstr ""
+"类似这样的色彩将被保留，其它的将会被灰度化。这必须是一个十六进制的值 (类似 "
+"HTML 颜色)。前两个字节是红，然后是绿、蓝。#000000 = 黑、#FF0000 = 红、"
+"#00FF00 = 绿、#FFFF00 = 黄 (红 + 绿)、#FFFFFF = 白"
+
+#: modules/video_filter/colorthres.c:59
+msgid "Select one color in the video"
+msgstr "选择视频中的颜色"
+
+#: modules/video_filter/colorthres.c:69
+msgid "Color threshold filter"
+msgstr "色彩阈值滤镜"
+
+#: modules/video_filter/colorthres.c:79
+msgid "Saturation threshold"
+msgstr "饱和度阈值"
+
+#: modules/video_filter/colorthres.c:81
+msgid "Similarity threshold"
+msgstr "相似阈值"
+
+#: modules/video_filter/croppadd.c:46
+msgid "Pixels to crop from top"
+msgstr "从顶部开始裁剪的像素"
+
+#: modules/video_filter/croppadd.c:48
+msgid "Number of pixels to crop from the top of the image."
+msgstr "从图像顶部开始裁剪的图像数量。"
+
+#: modules/video_filter/croppadd.c:49
+msgid "Pixels to crop from bottom"
+msgstr "从底部开始裁剪的像素"
+
+#: modules/video_filter/croppadd.c:51
+msgid "Number of pixels to crop from the bottom of the image."
+msgstr "从图像底部开始裁剪的图像数量。"
+
+#: modules/video_filter/croppadd.c:52
+msgid "Pixels to crop from left"
+msgstr "从左侧开始裁剪的像素"
+
+#: modules/video_filter/croppadd.c:54
+msgid "Number of pixels to crop from the left of the image."
+msgstr "从图像左侧开始裁剪的图像数量。"
+
+#: modules/video_filter/croppadd.c:55
+msgid "Pixels to crop from right"
+msgstr "从右侧开始裁剪的像素"
+
+#: modules/video_filter/croppadd.c:57
+msgid "Number of pixels to crop from the right of the image."
+msgstr "从图像右侧开始裁剪的图像数量。"
+
+#: modules/video_filter/croppadd.c:59
+msgid "Pixels to padd to top"
+msgstr "要添加到顶部的像素数量"
+
+#: modules/video_filter/croppadd.c:61
+msgid "Number of pixels to padd to the top of the image after cropping."
+msgstr "在裁剪后要添加到顶部的像素数量。"
+
+#: modules/video_filter/croppadd.c:62
+msgid "Pixels to padd to bottom"
+msgstr "要添加到底部的像素"
+
+#: modules/video_filter/croppadd.c:64
+msgid "Number of pixels to padd to the bottom of the image after cropping."
+msgstr "在裁剪后要添加到底部的像素数量。"
+
+#: modules/video_filter/croppadd.c:65
+msgid "Pixels to padd to left"
+msgstr "要添加到左侧的像素"
+
+#: modules/video_filter/croppadd.c:67
+msgid "Number of pixels to padd to the left of the image after cropping."
+msgstr "在裁剪后要添加到左侧的像素数量。"
+
+#: modules/video_filter/croppadd.c:68
+msgid "Pixels to padd to right"
+msgstr "要添加到右侧的像素"
+
+#: modules/video_filter/croppadd.c:70
+msgid "Number of pixels to padd to the right of the image after cropping."
+msgstr "在裁剪后要添加到右侧的像素数量。"
+
+#: modules/video_filter/croppadd.c:78
+#, fuzzy
+msgid "Croppadd"
+msgstr "裁剪/加边"
+
+#: modules/video_filter/croppadd.c:79
+#, fuzzy
+msgid "Video cropping filter"
+msgstr "视频比例滤镜"
+
+#: modules/video_filter/croppadd.c:96
+msgid "Padd"
+msgstr "Padd"
+
+#: modules/video_filter/deinterlace/algo_phosphor.h:45
+msgid "Latest"
+msgstr "最新"
+
+#: modules/video_filter/deinterlace/algo_phosphor.h:46
+msgid "AltLine"
+msgstr "AltLine"
+
+#: modules/video_filter/deinterlace/algo_phosphor.h:48
+msgid "Upconvert"
+msgstr "Upconvert"
+
+#: modules/video_filter/deinterlace/algo_phosphor.h:56
+msgid "Low"
+msgstr "低"
+
+#: modules/video_filter/deinterlace/algo_phosphor.h:57
+msgid "Medium"
+msgstr "中"
+
+#: modules/video_filter/deinterlace/algo_phosphor.h:58
+msgid "High"
+msgstr "高"
+
+#: modules/video_filter/deinterlace/deinterlace.c:55
+msgid "Streaming deinterlace mode"
+msgstr "串流反交错模式"
+
+#: modules/video_filter/deinterlace/deinterlace.c:56
+msgid "Deinterlace method to use for streaming."
+msgstr "要用于串流的反交错模式。"
+
+#: modules/video_filter/deinterlace/deinterlace.c:65
+msgid "Phosphor chroma mode for 4:2:0 input"
+msgstr "4:2:0 输入的 Phosphor 色度模式"
+
+#: modules/video_filter/deinterlace/deinterlace.c:66
+msgid ""
+"Choose handling for colours in those output frames that fall across input "
+"frame boundaries. \n"
+"\n"
+"Latest: take chroma from new (bright) field only. Good for interlaced input, "
+"such as videos from a camcorder. \n"
+"\n"
+"AltLine: take chroma line 1 from top field, line 2 from bottom field, etc. \n"
+"Default, good for NTSC telecined input (anime DVDs, etc.). \n"
+"\n"
+"Blend: average input field chromas. May distort the colours of the new "
+"(bright) field, too. \n"
+"\n"
+"Upconvert: output in 4:2:2 format (independent chroma for each field). Best "
+"simulation, but requires more CPU and memory bandwidth."
+msgstr ""
+"选择处理超出输入帧边界的输出帧的颜色。\n"
+"\n"
+"最新: 只从新 (亮) 场提取色度。适合交错输入，如摄影机生成的视频。\n"
+"\n"
+"AltLine: 从顶场提取色度行 1，从底场提取行 2，等等。\n"
+"默认，适合 NTSC 电视电影模式输入 (动画 DVD 等)。\n"
+"\n"
+"合并: 取输入场色度的平均值。可能会同时影响到新 (亮) 场。\n"
+"\n"
+"Upconvert: 以 4:2:2 格式输出 (各场色度独立)。最佳模拟，但需要更多的 CPU 与内"
+"存带宽。"
+
+#: modules/video_filter/deinterlace/deinterlace.c:88
+msgid "Phosphor old field dimmer strength"
+msgstr "Phosphor 旧场调光强度"
+
+#: modules/video_filter/deinterlace/deinterlace.c:89
+msgid ""
+"This controls the strength of the darkening filter that simulates CRT TV "
+"phosphor light decay for the old field in the Phosphor framerate doubler. "
+"Default: Low."
+msgstr ""
+"这将控制 Phosphor 帧率加倍器旧场模拟 CRT TV 荧光衰的暗化滤镜的强度。默认: "
+"低。"
+
+#: modules/video_filter/deinterlace/deinterlace.c:96
+msgid "Deinterlacing video filter"
+msgstr "反交错视频滤镜"
+
+#: modules/video_filter/dynamicoverlay/dynamicoverlay.c:60
+msgid "Input FIFO"
+msgstr "输入 FIFO"
+
+#: modules/video_filter/dynamicoverlay/dynamicoverlay.c:61
+msgid "FIFO which will be read for commands"
+msgstr "将要从命令中读取的 FIFO"
+
+#: modules/video_filter/dynamicoverlay/dynamicoverlay.c:63
+msgid "Output FIFO"
+msgstr "输出 FIFO"
+
+#: modules/video_filter/dynamicoverlay/dynamicoverlay.c:64
+msgid "FIFO which will be written to for responses"
+msgstr "将要被写入作为响应的 FIFO"
+
+#: modules/video_filter/dynamicoverlay/dynamicoverlay.c:67
+msgid "Dynamic video overlay"
+msgstr "动态视频覆盖"
+
+#: modules/video_filter/dynamicoverlay/dynamicoverlay.c:68
+#: share/lua/http/dialogs/create_stream.html:245
+#: modules/gui/qt4/ui/video_effects.h:1466
+msgid "Overlay"
+msgstr "覆盖"
+
+#: modules/video_filter/erase.c:56
+msgid "Image mask. Pixels with an alpha value greater than 50% will be erased."
+msgstr "图像掩码。alpha 值大于 50% 的像素将被消除。"
+
+#: modules/video_filter/erase.c:59
+msgid "X coordinate of the mask."
+msgstr "掩码的 X 坐标。"
+
+#: modules/video_filter/erase.c:61
+msgid "Y coordinate of the mask."
+msgstr "掩码的 Y 坐标。"
+
+#: modules/video_filter/erase.c:63
+msgid "Remove zones of the video using a picture as mask"
+msgstr "以图片为掩体移除视频区域"
+
+#: modules/video_filter/erase.c:68
+msgid "Erase video filter"
+msgstr "擦除视频滤镜"
+
+#: modules/video_filter/erase.c:69
+msgid "Erase"
+msgstr "擦除"
+
+#: modules/video_filter/extract.c:62
+msgid "RGB component to extract"
+msgstr "要释放的 RGB 部分"
+
+#: modules/video_filter/extract.c:63
+msgid "RGB component to extract. 0 for Red, 1 for Green and 2 for Blue."
+msgstr "要释放的 RGB 部分。0 为红、1 为绿、2 为蓝。"
+
+#: modules/video_filter/extract.c:74
+msgid "Extract RGB component video filter"
+msgstr "释放 RGB 组件视频滤镜"
+
+#: modules/video_filter/freeze.c:77
+#, fuzzy
+msgid "Freezing interactive video filter"
+msgstr "智力交互游戏视频滤镜"
+
+#: modules/video_filter/freeze.c:78
+#, fuzzy
+msgid "Freeze"
+msgstr "自由"
+
+#: modules/video_filter/gaussianblur.c:47
+msgid "Gaussian's std deviation"
+msgstr "高斯标准离差"
+
+#: modules/video_filter/gaussianblur.c:49
+msgid ""
+"Gaussian's standard deviation. The blurring will take into account pixels up "
+"to 3*sigma away in any direction."
+msgstr "高斯的标准偏差。像素将按照像素 3*sigma 的各方向进行模糊。"
+
+#: modules/video_filter/gaussianblur.c:52
+msgid "Add a blurring effect"
+msgstr "添加模糊特效"
+
+#: modules/video_filter/gaussianblur.c:57
+msgid "Gaussian blur video filter"
+msgstr "高斯模糊滤镜"
+
+#: modules/video_filter/gaussianblur.c:58
+msgid "Gaussian Blur"
+msgstr "高斯模糊"
+
+#: modules/video_filter/gradfun.c:50
+msgid "Radius in pixels"
+msgstr "以像素为单位的半径大小"
+
+#: modules/video_filter/gradfun.c:54
+msgid "Strength"
+msgstr "强度"
+
+#: modules/video_filter/gradfun.c:55
+msgid "Strength used to modify the value of a pixel"
+msgstr "修改像素值所用的强度"
+
+#: modules/video_filter/gradfun.c:58
+msgid "Gradfun video filter"
+msgstr "Gradfun 视频滤镜"
+
+#: modules/video_filter/gradfun.c:59
+msgid "Gradfun"
+msgstr "Gradfun"
+
+#: modules/video_filter/gradfun.c:60
+msgid "Debanding algorithm"
+msgstr "去色带算法"
+
+#: modules/video_filter/gradient.c:62
+msgid "Distort mode"
+msgstr "扭曲模式"
+
+#: modules/video_filter/gradient.c:63
+msgid "Distort mode, one of \"gradient\", \"edge\" and \"hough\"."
+msgstr "扭曲模式，\"倾斜\", \"边缘\" 和 \"破碎\" 中的一种。"
+
+#: modules/video_filter/gradient.c:65
+msgid "Gradient image type"
+msgstr "倾斜图像类型"
+
+#: modules/video_filter/gradient.c:66
+msgid ""
+"Gradient image type (0 or 1). 0 will turn the image to white while 1 will "
+"keep colors."
+msgstr "倾斜图像类型 (0 或 1)。 0 将使图像变为白色，1 将保持颜色。"
+
+#: modules/video_filter/gradient.c:69
+msgid "Apply cartoon effect"
+msgstr "应用卡通效果"
+
+#: modules/video_filter/gradient.c:70
+msgid "Apply cartoon effect. It is only used by \"gradient\" and \"edge\"."
+msgstr "应用卡通效果。它仅能用于 \"斜度\" 和 \"边缘\" 模式。"
+
+#: modules/video_filter/gradient.c:73
+msgid "Apply color gradient or edge detection effects"
+msgstr "应用色彩梯度与边界侦测特效"
+
+#: modules/video_filter/gradient.c:81
+msgid "Gradient video filter"
+msgstr "高斯视频滤镜"
+
+#: modules/video_filter/grain.c:54
+msgid "Variance of the gaussian noise"
+msgstr "高斯噪点差量"
+
+#: modules/video_filter/grain.c:58
+msgid "Minimal period"
+msgstr "最小周期"
+
+#: modules/video_filter/grain.c:59
+msgid "Minimal period of the noise grain in pixel"
+msgstr "噪点颗粒的最小周期，以像素为单位。"
+
+#: modules/video_filter/grain.c:60
+msgid "Maximal period"
+msgstr "最大周期"
+
+#: modules/video_filter/grain.c:61
+msgid "Maximal period of the noise grain in pixel"
+msgstr "噪点颗粒的最大周期，以像素为单位。"
+
+#: modules/video_filter/grain.c:64
+msgid "Grain video filter"
+msgstr "纹理视频滤镜"
+
+#: modules/video_filter/grain.c:65
+msgid "Grain"
+msgstr "纹理"
+
+#: modules/video_filter/grain.c:66
+msgid "Adds filtered gaussian noise"
+msgstr "添加经过滤的高斯噪点"
+
+#: modules/video_filter/hqdn3d.c:56
+msgid "Spatial luma strength (0-254)"
+msgstr "空间亮度强度 (0-254)"
+
+#: modules/video_filter/hqdn3d.c:57
+msgid "Spatial chroma strength (0-254)"
+msgstr "空间色度强度 (0-254)"
+
+#: modules/video_filter/hqdn3d.c:58
+msgid "Temporal luma strength (0-254)"
+msgstr "时序亮度强度 (0-254)"
+
+#: modules/video_filter/hqdn3d.c:59
+msgid "Temporal chroma strength (0-254)"
+msgstr "时序色度强度 (0-254)"
+
+#: modules/video_filter/hqdn3d.c:62
+msgid "HQ Denoiser 3D"
+msgstr "HQ Denoiser 3D"
+
+#: modules/video_filter/hqdn3d.c:63
+msgid "High Quality 3D Denoiser filter"
+msgstr "高质量 3D 降噪滤镜"
+
+#: modules/video_filter/invert.c:50
+msgid "Invert video filter"
+msgstr "倒转视频滤镜"
+
+#: modules/video_filter/invert.c:51
+msgid "Color inversion"
+msgstr "倒转颜色"
+
+#: modules/video_filter/logo.c:49
+msgid ""
+"Full path of the image files to use. Format is <image>[,<delay in ms>[,"
+"<alpha>]][;<image>[,<delay>[,<alpha>]]][;...]. If you only have one file, "
+"simply enter its filename."
+msgstr ""
+"要使用的图像文件的完整路径名。格式为 <图像>[,<以毫秒为单位的延迟>[,<alpha>][;"
+"<图像>[,<延迟>[,<alpha>]]][;...]。如果您仅有一个文件，只需在这里指定文件名。"
+
+#: modules/video_filter/logo.c:52
+msgid "Logo animation # of loops"
+msgstr "标志动画 # 的循环"
+
+#: modules/video_filter/logo.c:53
+msgid "Number of loops for the logo animation.-1 = continuous, 0 = disabled"
+msgstr "标志动画的循环数量。-1 = 继续, 0 = 关闭"
+
+#: modules/video_filter/logo.c:55
+msgid "Logo individual image time in ms"
+msgstr "标志的间隔图像时间为毫秒"
+
+#: modules/video_filter/logo.c:56
+msgid "Individual image display time of 0 - 60000 ms."
+msgstr "图像显示间隔时间 0 - 60000 毫秒。"
+
+#: modules/video_filter/logo.c:59
+msgid "X coordinate of the logo. You can move the logo by left-clicking it."
+msgstr "标志的 X 坐标。您可以通过左击它移动标志。"
+
+#: modules/video_filter/logo.c:62
+msgid "Y coordinate of the logo. You can move the logo by left-clicking it."
+msgstr "标志的 Y 坐标。您可以通过左击它移动标志。"
+
+#: modules/video_filter/logo.c:64
+msgid "Opacity of the logo"
+msgstr "logo 透明度"
+
+#: modules/video_filter/logo.c:65
+msgid ""
+"Logo opacity value (from 0 for full transparency to 255 for full opacity)."
+msgstr "logo 透明度 (数值介于 0(完全透明) 与 255(完全不透明) 之间)。"
+
+#: modules/video_filter/logo.c:67
+msgid "Logo position"
+msgstr "标志位置"
+
+#: modules/video_filter/logo.c:69
+msgid ""
+"Enforce the logo position on the video (0=center, 1=left, 2=right, 4=top, "
+"8=bottom, you can also use combinations of these values, eg 6 = top-right)."
+msgstr ""
+"强制指定视频上的标志位置 (0=居中、1=左、2=右、4=上、8=下，您也可以混合使用这"
+"些值，例如 6=4+2 表示右上)。"
+
+#: modules/video_filter/logo.c:73
+msgid "Use a local picture as logo on the video"
+msgstr "使用本地图片作为视频中的 logo"
+
+#: modules/video_filter/logo.c:92
+msgid "Logo sub source"
+msgstr "标志子源滤镜"
+
+#: modules/video_filter/logo.c:93
+msgid "Logo overlay"
+msgstr "标志覆盖"
+
+#: modules/video_filter/logo.c:111
+msgid "Logo video filter"
+msgstr "标志视频滤镜"
+
+#: modules/video_filter/magnify.c:47
+msgid "Magnify/Zoom interactive video filter"
+msgstr "放大/变焦交互视频滤镜"
+
+#: modules/video_filter/magnify.c:48
+msgid "Magnify"
+msgstr "放大"
+
+#: modules/video_filter/marq.c:89
+msgid ""
+"Marquee text to display. (Available format strings: %Y = year, %m = month, "
+"%d = day, %H = hour, %M = minute, %S = second, ...)"
+msgstr ""
+
+#: modules/video_filter/marq.c:93
+msgid "Text file"
+msgstr "文本文件"
+
+#: modules/video_filter/marq.c:94
+msgid "File to read the marquee text from."
+msgstr "读取横幅文本的来源文件。"
+
+#: modules/video_filter/marq.c:96 modules/video_filter/rss.c:143
+msgid "X offset, from the left screen edge."
+msgstr "从屏幕左边缘开始的 X 偏移。"
+
+#: modules/video_filter/marq.c:98 modules/video_filter/rss.c:145
+msgid "Y offset, down from the top."
+msgstr "从屏幕顶部向下的 Y 偏移。"
+
+#: modules/video_filter/marq.c:99
+msgid "Timeout"
+msgstr "超时"
+
+#: modules/video_filter/marq.c:100
+msgid ""
+"Number of milliseconds the marquee must remain displayed. Default value is 0 "
+"(remains forever)."
+msgstr "marquee 将显示的剩余毫秒数。默认值是 0 (永远保留)。"
+
+#: modules/video_filter/marq.c:103
+msgid "Refresh period in ms"
+msgstr "以毫秒为单位的刷新时间"
+
+#: modules/video_filter/marq.c:104
+msgid ""
+"Number of milliseconds between string updates. This is mainly useful when "
+"using meta data or time format string sequences."
+msgstr ""
+"字串更新的间隔毫秒数。这在使用元数据或时间格式时间格式字串序列时很有用。"
+
+#: modules/video_filter/marq.c:108
+msgid ""
+"Opacity (inverse of transparency) of overlayed text. 0 = transparent, 255 = "
+"totally opaque. "
+msgstr "覆盖文本的不透明度 (相对于透明度)。0 = 透明，255 = 完全不透明。"
+
+#: modules/video_filter/marq.c:110 modules/video_filter/rss.c:150
+msgid "Font size, pixels"
+msgstr "字体大小，像素"
+
+#: modules/video_filter/marq.c:111 modules/video_filter/rss.c:151
+msgid "Font size, in pixels. Default is -1 (use default font size)."
+msgstr "以像素为单位的字体大小。默认是 -1 (使用默认字体大小)。"
+
+#: modules/video_filter/marq.c:115 modules/video_filter/rss.c:155
+msgid ""
+"Color of the text that will be rendered on the video. This must be an "
+"hexadecimal (like HTML colors). The first two chars are for red, then green, "
+"then blue. #000000 = black, #FF0000 = red, #00FF00 = green, #FFFF00 = yellow "
+"(red + green), #FFFFFF = white"
+msgstr ""
+"要视频上渲染的文本颜色。这必须是一个十六进制值 (类似 HTML 颜色)。前两个字节是"
+"红，然后是绿、栏。#000000 = 黑、#FF0000 = 红、#00FF00 = 绿、#FFFF00 = 黄 (红 "
+"+ 绿)、#FFFFFF = 白"
+
+#: modules/video_filter/marq.c:120
+msgid "Marquee position"
+msgstr "Marquee 位置"
+
+#: modules/video_filter/marq.c:122
+msgid ""
+"You can enforce the marquee position on the video (0=center, 1=left, "
+"2=right, 4=top, 8=bottom, you can also use combinations of these values, eg "
+"6 = top-right)."
+msgstr ""
+"您可以强制指定在视频上的 marquee 位置 (0=居中、1=左、2=右、4=上、8=下，您也可"
+"以混合使用这些值，例如 6=4+2 表示右上)。"
+
+#: modules/video_filter/marq.c:133
+msgid "Display text above the video"
+msgstr "在视频上方显示文本"
+
+#: modules/video_filter/marq.c:140
+msgid "Marquee"
+msgstr "滚动字幕"
+
+#: modules/video_filter/marq.c:141
+msgid "Marquee display"
+msgstr "Marquee 显示"
+
+#: modules/video_filter/marq.c:167 modules/video_filter/rss.c:216
+msgid "Misc"
+msgstr "其它"
+
+#: modules/video_filter/mirror.c:63
+msgid "Mirror orientation"
+msgstr "镜像趋向"
+
+#: modules/video_filter/mirror.c:64
+msgid ""
+"Defines orientation of the mirror splitting. Can be vertical or "
+"horizontal"
+msgstr "定义镜像切割的趋向。 可以为垂直或水平"
+
+#: modules/video_filter/mirror.c:68
+msgid "Vertical"
+msgstr "垂直"
+
+#: modules/video_filter/mirror.c:68
+msgid "Horizontal"
+msgstr "水平"
+
+#: modules/video_filter/mirror.c:70
+msgid "Direction"
+msgstr "方向"
+
+#: modules/video_filter/mirror.c:71
+msgid "Direction of the mirroring"
+msgstr "镜像方向"
+
+#: modules/video_filter/mirror.c:74
+msgid "Left to right/Top to bottom"
+msgstr "从左到右/从上到下"
+
+#: modules/video_filter/mirror.c:74
+msgid "Right to left/Bottom to top"
+msgstr "从右到左/从下往上"
+
+#: modules/video_filter/mirror.c:79
+msgid "Mirror video filter"
+msgstr "镜像视频滤镜"
+
+#: modules/video_filter/mirror.c:80
+msgid "Mirror video"
+msgstr "镜像视频"
+
+#: modules/video_filter/mirror.c:81
+msgid "Splits video in two same parts, like in a mirror"
+msgstr "将视频切割为两个相同的部分，就像在镜子中一样"
+
+#: modules/video_filter/mosaic.c:89
+msgid ""
+"Transparency of the mosaic foreground pictures. 0 means transparent, 255 "
+"opaque (default)."
+msgstr "mosaic 前景图片的透明度。0 表示透明，255 不透明度 (默认)。"
+
+#: modules/video_filter/mosaic.c:93
+msgid "Total height of the mosaic, in pixels."
+msgstr "mosaic 的总计高度，以像素为单位。"
+
+#: modules/video_filter/mosaic.c:95
+msgid "Total width of the mosaic, in pixels."
+msgstr "mosaic 的总计高度，以像素为单位。"
+
+#: modules/video_filter/mosaic.c:97
+msgid "Top left corner X coordinate"
+msgstr "左上角的 X 坐标"
+
+#: modules/video_filter/mosaic.c:99
+msgid "X Coordinate of the top-left corner of the mosaic."
+msgstr "mosaic 的坐上角 X 坐标。"
+
+#: modules/video_filter/mosaic.c:100
+msgid "Top left corner Y coordinate"
+msgstr "坐上角的 Y 坐标"
+
+#: modules/video_filter/mosaic.c:102
+msgid "Y Coordinate of the top-left corner of the mosaic."
+msgstr "mosaic 的左上角 Y 坐标。"
+
+#: modules/video_filter/mosaic.c:104
+msgid "Border width"
+msgstr "边框宽度"
+
+#: modules/video_filter/mosaic.c:106
+msgid "Width in pixels of the border between miniatures."
+msgstr "在 miniatures 之间的边框像素宽度。"
+
+#: modules/video_filter/mosaic.c:107
+msgid "Border height"
+msgstr "边框高度"
+
+#: modules/video_filter/mosaic.c:109
+msgid "Height in pixels of the border between miniatures."
+msgstr "在 miniatures 之间的边框像素高度。"
+
+#: modules/video_filter/mosaic.c:111
+msgid "Mosaic alignment"
+msgstr "Mosaic 排列"
+
+#: modules/video_filter/mosaic.c:113
+msgid ""
+"You can enforce the mosaic alignment on the video (0=center, 1=left, "
+"2=right, 4=top, 8=bottom, you can also use combinations of these values, eg "
+"6 = top-right)."
+msgstr ""
+"您可以强制指定 mosaic 在视频上排列 (0=居中、1=左、2=右、4=上、8=下，您也可以"
+"混合使用这些值，例如 6=4+2 表示右上)。"
+
+#: modules/video_filter/mosaic.c:117
+msgid "Positioning method"
+msgstr "位置模块"
+
+#: modules/video_filter/mosaic.c:119
+msgid ""
+"Positioning method for the mosaic. auto: automatically choose the best "
+"number of rows and columns. fixed: use the user-defined number of rows and "
+"columns. offsets: use the user-defined offsets for each image."
+msgstr ""
+"用于 mosaic 的位置模式。自动: 自动选择最佳的行和列数量。固定: 使用用户定义的"
+"行和列数量。偏移: 为每幅图像使用用户定义的偏移。"
+
+#: modules/video_filter/mosaic.c:124 modules/video_splitter/panoramix.c:64
+#: modules/video_splitter/wall.c:50
+msgid "Number of rows"
+msgstr "行数"
+
+#: modules/video_filter/mosaic.c:126
+msgid ""
+"Number of image rows in the mosaic (only used if positioning method is set "
+"to \"fixed\")."
+msgstr "mosaic 图像行数 (仅被用于位置模式被设置为 \"固定\" 的模式下)。"
+
+#: modules/video_filter/mosaic.c:129 modules/video_splitter/panoramix.c:60
+#: modules/video_splitter/wall.c:46
+msgid "Number of columns"
+msgstr "列数"
+
+#: modules/video_filter/mosaic.c:131
+msgid ""
+"Number of image columns in the mosaic (only used if positioning method is "
+"set to \"fixed\"."
+msgstr "mosaic 图像列数 (仅被用于位置模式被设置为 \"固定\" 的模式下。"
+
+#: modules/video_filter/mosaic.c:134
+msgid "Keep aspect ratio"
+msgstr "保持高宽比"
+
+#: modules/video_filter/mosaic.c:136
+msgid "Keep the original aspect ratio when resizing mosaic elements."
+msgstr "在调整 mosaic 元素时保持原始高宽比。"
+
+#: modules/video_filter/mosaic.c:138
+msgid "Keep original size"
+msgstr "保持原始大小"
+
+#: modules/video_filter/mosaic.c:140
+msgid "Keep the original size of mosaic elements."
+msgstr "保持 mosaic 元素的原始大小。"
+
+#: modules/video_filter/mosaic.c:142
+msgid "Elements order"
+msgstr "元素顺序"
+
+#: modules/video_filter/mosaic.c:144
+msgid ""
+"You can enforce the order of the elements on the mosaic. You must give a "
+"comma-separated list of picture ID(s).These IDs are assigned in the \"mosaic-"
+"bridge\" module."
+msgstr ""
+"您可以强制指定 mosaic 元素的数序。您必须给予一个逗号分隔的图像 ID 列表。这些 "
+"ID 被分配给 \"mosaic - 桥\" 模式。"
+
+#: modules/video_filter/mosaic.c:148
+msgid "Offsets in order"
+msgstr "偏移顺序"
+
+#: modules/video_filter/mosaic.c:150
+msgid ""
+"You can enforce the (x,y) offsets of the elements on the mosaic (only used "
+"if positioning method is set to \"offsets\"). You must give a comma-"
+"separated list of coordinates (eg: 10,10,150,10)."
+msgstr ""
+"您可以强制指定在 mosaic 中的元素偏移 (x,y) (仅在位置模式被设置为 \"偏移\" 的"
+"情况下)。您必须给出一个逗号分隔的坐标列表 (例如: 10,10,150,10)。"
+
+#: modules/video_filter/mosaic.c:156
+msgid ""
+"Pictures coming from the mosaic elements will be delayed according to this "
+"value (in milliseconds). For high values you will need to raise caching at "
+"input."
+msgstr ""
+"来自 mosaic 元素的图片将被安装此值 (以毫秒) 被延迟。使用高值的时候您需要加大"
+"缓冲的大小。"
+
+#: modules/video_filter/mosaic.c:166
+msgid "auto"
+msgstr "自动"
+
+#: modules/video_filter/mosaic.c:166
+msgid "fixed"
+msgstr "固定"
+
+#: modules/video_filter/mosaic.c:166
+msgid "offsets"
+msgstr "偏移"
+
+#: modules/video_filter/mosaic.c:176
+msgid "Mosaic video sub source"
+msgstr "Mosaic 视频子源"
+
+#: modules/video_filter/mosaic.c:177
+msgid "Mosaic"
+msgstr "马赛克"
+
+#: modules/video_filter/motionblur.c:53
+msgid "Blur factor (1-127)"
+msgstr "模糊因数 (1-127)"
+
+#: modules/video_filter/motionblur.c:54
+msgid "The degree of blurring from 1 to 127."
+msgstr "模糊程度从 1 到 127。"
+
+#: modules/video_filter/motionblur.c:60
+msgid "Motion blur filter"
+msgstr "动态模糊滤镜"
+
+#: modules/video_filter/motiondetect.c:48
+msgid "Motion detect video filter"
+msgstr "动态检测视频滤镜"
+
+#: modules/video_filter/oldmovie.c:185
+#, fuzzy
+msgid "Old movie effect video filter"
+msgstr "动态检测视频滤镜"
+
+#: modules/video_filter/oldmovie.c:186
+msgid "Old movie"
+msgstr ""
+
+#: modules/video_filter/opencv_example.cpp:69
+msgid "OpenCV face detection example filter"
+msgstr "OpenCV 表明检测示范滤镜"
+
+#: modules/video_filter/opencv_example.cpp:70
+msgid "OpenCV example"
+msgstr "OpenCV 示范"
+
+#: modules/video_filter/opencv_example.cpp:79
+msgid "Haar cascade filename"
+msgstr "雾布文件名"
+
+#: modules/video_filter/opencv_example.cpp:80
+msgid "Name of XML file containing Haar cascade description"
+msgstr "包含雾布表示的 XML 文件名"
+
+#: modules/video_filter/opencv_wrapper.c:61
+msgid "Use input chroma unaltered"
+msgstr "使用未经改变的输入色度"
+
+#: modules/video_filter/opencv_wrapper.c:62
+msgid "I420 - first plane is greyscale"
+msgstr "I420 - 首屏幕为灰度"
+
+#: modules/video_filter/opencv_wrapper.c:62
+msgid "RGB32"
+msgstr "RGB32"
+
+#: modules/video_filter/opencv_wrapper.c:65
+msgid "Don't display any video"
+msgstr "不显示任意视频"
+
+#: modules/video_filter/opencv_wrapper.c:66
+msgid "Display the input video"
+msgstr "显示输入视频"
+
+#: modules/video_filter/opencv_wrapper.c:66
+msgid "Display the processed video"
+msgstr "显示已被处理的视频"
+
+#: modules/video_filter/opencv_wrapper.c:69
+msgid "Show only errors"
+msgstr "仅显示错误"
+
+#: modules/video_filter/opencv_wrapper.c:70
+msgid "Show errors and warnings"
+msgstr "显示错误和警告"
+
+#: modules/video_filter/opencv_wrapper.c:70
+msgid "Show everything including debug messages"
+msgstr "显示包括调试信息在内的所有信息"
+
+#: modules/video_filter/opencv_wrapper.c:73
+msgid "OpenCV video filter wrapper"
+msgstr "OpenCV 视频滤镜封装器"
+
+#: modules/video_filter/opencv_wrapper.c:74
+msgid "OpenCV"
+msgstr "OpenCV"
+
+#: modules/video_filter/opencv_wrapper.c:81
+msgid "Scale factor (0.1-2.0)"
+msgstr "比例因数 (0.1-2.0)"
+
+#: modules/video_filter/opencv_wrapper.c:82
+msgid ""
+"Ammount by which to scale the picture before sending it to the internal "
+"OpenCV filter"
+msgstr "在发送到内部 OpenCV 滤镜之前的图像比例数量"
+
+#: modules/video_filter/opencv_wrapper.c:85
+msgid "OpenCV filter chroma"
+msgstr "OpenCV 滤镜色度"
+
+#: modules/video_filter/opencv_wrapper.c:86
+msgid ""
+"Chroma to convert picture to before sending it to the internal OpenCV filter"
+msgstr "在发送到内部 OpenCV 滤镜前的转换图像色度"
+
+#: modules/video_filter/opencv_wrapper.c:89
+msgid "Wrapper filter output"
+msgstr "封包器滤镜输出"
+
+#: modules/video_filter/opencv_wrapper.c:90
+msgid "Determines what (if any) video is displayed by the wrapper filter"
+msgstr "定义 (如果可能) 什么视频将由封包器滤镜显示"
+
+#: modules/video_filter/opencv_wrapper.c:93
+msgid "OpenCV internal filter name"
+msgstr "OpenCV 内部滤镜名称"
+
+#: modules/video_filter/opencv_wrapper.c:94
+msgid "Name of internal OpenCV plugin filter to use"
+msgstr "要使用的 OpenCV 插件滤镜名称"
+
+#: modules/video_filter/posterize.c:61
+msgid "Posterize level (number of colors is cube of this value)"
+msgstr "色调分离级别 (分离的颜色数为此值)"
+
+#: modules/video_filter/posterize.c:67
+msgid "Posterize video filter"
+msgstr "色调分离视频滤镜"
+
+#: modules/video_filter/posterize.c:69
+msgid "Posterize video by lowering the number of colors"
+msgstr "通过降低颜色数量对视频进行色调分离"
+
+#: modules/video_filter/postproc.c:70
+msgid ""
+"Quality of post processing. Valid range is 0 (disabled) to 6 (highest)\n"
+"Higher levels require more CPU power, but produce higher quality pictures.\n"
+"With default filter chain, the values map to the following filters:\n"
+"1: hb, 2-4: hb+vb, 5-6: hb+vb+dr"
+msgstr ""
+"后处理的质量。有效范围为 0 (禁用) 到 6 (最高)\n"
+"高等级需要更强劲的 CPU，但是能产生更高的画面质量。\n"
+"默认滤镜链值映射如下滤镜:\n"
+"1: hb, 2-4: hb+vb, 5-6: hb+vb+dr"
+
+#: modules/video_filter/postproc.c:75
+msgid "FFmpeg post processing filter chains"
+msgstr "FFmpeg 预处理滤镜链"
+
+#: modules/video_filter/postproc.c:84
+msgid "Video post processing filter"
+msgstr "视频预处理滤镜"
+
+#: modules/video_filter/postproc.c:85
+msgid "Postproc"
+msgstr "后期处理"
+
+#: modules/video_filter/postproc.c:237
+msgid "Lowest"
+msgstr "最低"
+
+#: modules/video_filter/postproc.c:240
+msgid "Highest"
+msgstr "最高"
+
+#: modules/video_filter/psychedelic.c:54
+msgid "Psychedelic video filter"
+msgstr "迷幻视频滤镜"
+
+#: modules/video_filter/puzzle.c:51 modules/video_filter/puzzle.c:52
+msgid "Number of puzzle rows"
+msgstr "智力游戏的行数"
+
+#: modules/video_filter/puzzle.c:53 modules/video_filter/puzzle.c:54
+msgid "Number of puzzle columns"
+msgstr "智力游戏的列数"
+
+#: modules/video_filter/puzzle.c:55
+msgid "Game mode"
+msgstr "游戏模式"
+
+#: modules/video_filter/puzzle.c:56
+msgid "Select game mode variation from jigsaw puzzle to sliding puzzle."
+msgstr "选择游戏模式变种，从拼图到滑块类应有尽有。"
+
+#: modules/video_filter/puzzle.c:57
+msgid "Border"
+msgstr "边框"
+
+#: modules/video_filter/puzzle.c:58
+msgid "Unshuffled Border width."
+msgstr "默认边框宽度。"
+
+#: modules/video_filter/puzzle.c:59
+msgid "Small preview"
+msgstr "小预览"
+
+#: modules/video_filter/puzzle.c:60
+msgid "Show small preview."
+msgstr "显示小预览。"
+
+#: modules/video_filter/puzzle.c:61
+msgid "Small preview size"
+msgstr "小预览尺寸"
+
+#: modules/video_filter/puzzle.c:62
+msgid "Show small preview size (percent of source)."
+msgstr "显示小预览的尺寸 (源的百分比)。"
+
+#: modules/video_filter/puzzle.c:63
+msgid "Piece edge shape size"
+msgstr "切片边缘形状大小"
+
+#: modules/video_filter/puzzle.c:64
+msgid "Size of the curve along the piece's edge"
+msgstr "切片边缘曲线的大小"
+
+#: modules/video_filter/puzzle.c:65
+msgid "Auto shuffle"
+msgstr "自动重排"
+
+#: modules/video_filter/puzzle.c:66
+msgid "Auto shuffle delay during game"
+msgstr "游戏过程中自动重排的延时"
+
+#: modules/video_filter/puzzle.c:67
+msgid "Auto solve"
+msgstr "自动求解"
+
+#: modules/video_filter/puzzle.c:68
+msgid "Auto solve delay during game"
+msgstr "游戏过程中自动求解的延时"
+
+#: modules/video_filter/puzzle.c:69
+msgid "Rotation"
+msgstr "旋转"
+
+#: modules/video_filter/puzzle.c:70
+msgid "Rotation parameter: none;180;90-270;mirror"
+msgstr "旋转参数: none;180;90-270;mirror"
+
+#: modules/video_filter/puzzle.c:73
+msgid "jigsaw puzzle"
+msgstr "拼图"
+
+#: modules/video_filter/puzzle.c:73
+msgid "sliding puzzle"
+msgstr "滑块"
+
+#: modules/video_filter/puzzle.c:73
+msgid "swap puzzle"
+msgstr "交换"
+
+#: modules/video_filter/puzzle.c:73
+msgid "exchange puzzle"
+msgstr "互换"
+
+#: modules/video_filter/puzzle.c:75
+msgid "0"
+msgstr "0"
+
+#: modules/video_filter/puzzle.c:75
+msgid "0/180"
+msgstr "0/180"
+
+#: modules/video_filter/puzzle.c:75
+msgid "0/90/180/270"
+msgstr "0/90/180/270"
+
+#: modules/video_filter/puzzle.c:75
+msgid "0/90/180/270/mirror"
+msgstr "0/90/180/270/mirror"
+
+#: modules/video_filter/puzzle.c:83
+msgid "Puzzle interactive game video filter"
+msgstr "智力交互游戏视频滤镜"
+
+#: modules/video_filter/puzzle.c:84
+msgid "Puzzle"
+msgstr "智力游戏"
+
+#: modules/video_filter/remoteosd.c:70
+msgid "VNC Host"
+msgstr "VNC 主机"
+
+#: modules/video_filter/remoteosd.c:72
+msgid "VNC hostname or IP address."
+msgstr "VNC 主机或 IP 地址。"
+
+#: modules/video_filter/remoteosd.c:74
+msgid "VNC Port"
+msgstr "VNC 端口"
+
+#: modules/video_filter/remoteosd.c:76
+msgid "VNC port number."
+msgstr "VNC 端口号。"
+
+#: modules/video_filter/remoteosd.c:78
+msgid "VNC Password"
+msgstr "VNC 密码"
+
+#: modules/video_filter/remoteosd.c:80
+msgid "VNC password."
+msgstr "VNC 密码。"
+
+#: modules/video_filter/remoteosd.c:82
+msgid "VNC poll interval"
+msgstr "VNC 查询间隔"
+
+#: modules/video_filter/remoteosd.c:84
+msgid ""
+"In this interval an update from VNC is requested, default every 300 ms. "
+msgstr "需要 VNC 的更新间隔，默认为每 300 毫秒。"
+
+#: modules/video_filter/remoteosd.c:86
+msgid "VNC polling"
+msgstr "VNC 查询"
+
+#: modules/video_filter/remoteosd.c:88
+msgid "Activate VNC polling. Do NOT activate for use as VDR ffnetdev client."
+msgstr "激活 VNC 查询。请不要在作为 VDR ffnetdev 客户端时激活。"
+
+#: modules/video_filter/remoteosd.c:92
+msgid ""
+"Send mouse events to VNC host. Not needed for use as VDR ffnetdev client."
+msgstr "发送鼠标事件到 VNC 主机。在作为 VDR ffnetdev 客户端时不需要。"
+
+#: modules/video_filter/remoteosd.c:94
+msgid "Key events"
+msgstr "密匙事件"
+
+#: modules/video_filter/remoteosd.c:96
+msgid "Send key events to VNC host."
+msgstr "发送密匙事件到 VNC 客户端。"
+
+#: modules/video_filter/remoteosd.c:98
+msgid "Alpha transparency value (default 255)"
+msgstr "Alpha 透明值 (默认 255)"
+
+#: modules/video_filter/remoteosd.c:100
+msgid ""
+"The transparency of the OSD VNC can be changed by giving a value between 0 "
+"and 255. A lower value specifies more transparency a higher means less "
+"transparency. The default is being not transparent (value 255) the minimum "
+"is fully transparent (value 0)."
+msgstr ""
+"OSD VNC 的透明度可以通过给予 0 到 255 之间的值被更改。一个较低的值将有较高的"
+"透明度一个较高的值透明度较小。默认为不透明 (值 255) 最小为完全透明 (值 0)。"
+
+#: modules/video_filter/remoteosd.c:115
+msgid "Remote-OSD over VNC"
+msgstr "通过 VNC 的远程 OSD"
+
+#: modules/video_filter/remoteosd.c:117
+msgid "Remote-OSD"
+msgstr "远程 OSD"
+
+#: modules/video_filter/ripple.c:52
+msgid "Ripple video filter"
+msgstr "脉动视频滤镜"
+
+#: modules/video_filter/ripple.c:53
+msgid "Ripple"
+msgstr "涟漪"
+
+#: modules/video_filter/rotate.c:54
+msgid "Angle in degrees"
+msgstr "角度值"
+
+#: modules/video_filter/rotate.c:55
+msgid "Angle in degrees (0 to 359)"
+msgstr "角度值 (0 到 359)"
+
+#: modules/video_filter/rotate.c:56
+msgid "Use motion sensors"
+msgstr "使用运动传感器"
+
+#: modules/video_filter/rotate.c:66
+msgid "Rotate video filter"
+msgstr "旋转视频滤镜"
+
+#: modules/video_filter/rotate.c:67 modules/gui/qt4/ui/video_effects.h:1439
+msgid "Rotate"
+msgstr "旋转"
+
+#: modules/video_filter/rss.c:129
+msgid "Feed URLs"
+msgstr "Feed 网址"
+
+#: modules/video_filter/rss.c:130
+msgid "RSS/Atom feed '|' (pipe) separated URLs."
+msgstr "RSS/Atom feed 以 '|' (竖线) 分隔的 URL。"
+
+#: modules/video_filter/rss.c:131
+msgid "Speed of feeds"
+msgstr "feed 的速度"
+
+#: modules/video_filter/rss.c:132
+msgid "Speed of the RSS/Atom feeds in microseconds (bigger is slower)."
+msgstr "RSS/Atom feed 的毫秒速度 (大为慢)。"
+
+#: modules/video_filter/rss.c:133
+msgid "Max length"
+msgstr "最大长度"
+
+#: modules/video_filter/rss.c:134
+msgid "Maximum number of characters displayed on the screen."
+msgstr "在屏幕上显示的最大字节数量。"
+
+#: modules/video_filter/rss.c:136
+msgid "Refresh time"
+msgstr "刷新时间"
+
+#: modules/video_filter/rss.c:137
+msgid ""
+"Number of seconds between each forced refresh of the feeds. 0 means that the "
+"feeds are never updated."
+msgstr "每次强制刷新 feed 的间隔描述。0 表示永远不更新 feed。"
+
+#: modules/video_filter/rss.c:139
+msgid "Feed images"
+msgstr "Feed 图像"
+
+#: modules/video_filter/rss.c:140
+msgid "Display feed images if available."
+msgstr "如果可用显示 feed 图像。"
+
+#: modules/video_filter/rss.c:147
+msgid ""
+"Opacity (inverse of transparency) of overlay text. 0 = transparent, 255 = "
+"totally opaque."
+msgstr "覆盖文本的不透明度 (与透明度相反)。0 = 透明, 255 = 完全不透明。"
+
+#: modules/video_filter/rss.c:160
+msgid "Text position"
+msgstr "文本位置"
+
+#: modules/video_filter/rss.c:162
+msgid ""
+"You can enforce the text position on the video (0=center, 1=left, 2=right, "
+"4=top, 8=bottom; you can also use combinations of these values, eg 6 = top-"
+"right)."
+msgstr ""
+"您可以强制指定在视频上的文本位置 (0=居中、1=左、2=右、4=上、8=下，您也可以混"
+"合使用这些值，例如 6=4+2 表示右上)。"
+
+#: modules/video_filter/rss.c:166
+msgid "Title display mode"
+msgstr "标题显示模式"
+
+#: modules/video_filter/rss.c:167
+msgid ""
+"Title display mode. Default is 0 (hidden) if the feed has an image and feed "
+"images are enabled, 1 otherwise."
+msgstr ""
+"标题显示模式。默认为 0 (隐藏) 如果 feed 有一副图像并且图像为开启时 1 为其它。"
+
+#: modules/video_filter/rss.c:169
+msgid "Display a RSS or ATOM Feed on your video"
+msgstr "在视频上显示 RSS 或 ATOM Feed"
+
+#: modules/video_filter/rss.c:184
+msgid "Don't show"
+msgstr "不显示"
+
+#: modules/video_filter/rss.c:184
+msgid "Always visible"
+msgstr "总是可见"
+
+#: modules/video_filter/rss.c:184
+msgid "Scroll with feed"
+msgstr "滚动显示 feed"
+
+#: modules/video_filter/rss.c:193
+msgid "RSS / Atom"
+msgstr "RSS / Atom"
+
+#: modules/video_filter/rss.c:227
+msgid "RSS and Atom feed display"
+msgstr "RSS 与 Atom feed 显示"
+
+#: modules/video_filter/scene.c:59
+msgid "Image format"
+msgstr "图像格式"
+
+#: modules/video_filter/scene.c:60
+msgid "Format of the output images (png, jpeg, ...)."
+msgstr "输出图像的格式 (png, jpeg, ...)。"
+
+#: modules/video_filter/scene.c:63
+msgid ""
+"You can enforce the image width. By default (-1) VLC will adapt to the video "
+"characteristics."
+msgstr "您可以强制指定图像的宽度。按默认 (-1) VLC 将自动适应视频参数。"
+
+#: modules/video_filter/scene.c:68
+msgid ""
+"You can enforce the image height. By default (-1) VLC will adapt to the "
+"video characteristics."
+msgstr "您可以强制指定图像高度。按默认 (-1) VLC 将自动适应视频参数。"
+
+#: modules/video_filter/scene.c:72
+msgid "Recording ratio"
+msgstr "录制率"
+
+#: modules/video_filter/scene.c:73
+msgid ""
+"Ratio of images to record. 3 means that one image out of three is recorded."
+msgstr "图像录制的机率。3 表示三幅中的一副图像将被录制。"
+
+#: modules/video_filter/scene.c:76
+msgid "Filename prefix"
+msgstr "文件名前缀"
+
+#: modules/video_filter/scene.c:77
+msgid ""
+"Prefix of the output images filenames. Output filenames will have the "
+"\"prefixNUMBER.format\" form if replace is not true."
+msgstr ""
+"输出图像文件名的前缀。如替换不为真，输出文件名将是 \"前缀数字.格式\" 的形式。"
+
+#: modules/video_filter/scene.c:81
+msgid "Directory path prefix"
+msgstr "目录路径前缀"
+
+#: modules/video_filter/scene.c:82
+msgid ""
+"Directory path where images files should be saved. If not set, then images "
+"will be automatically saved in users homedir."
+msgstr "图像文件保存的目录路径。若不设置，图像将自动保存到用户的主目录。"
+
+#: modules/video_filter/scene.c:86
+msgid "Always write to the same file"
+msgstr "总是写入到相同的文件中"
+
+#: modules/video_filter/scene.c:87
+msgid ""
+"Always write to the same file instead of creating one file per image. In "
+"this case, the number is not appended to the filename."
+msgstr ""
+"总是写入到相同的文件中替代为每幅图像创建一个文件。由于此原因数字将不会被附加"
+"到文件名后。"
+
+#: modules/video_filter/scene.c:91
+msgid "Send your video to picture files"
+msgstr "将视频发至图片文件"
+
+#: modules/video_filter/scene.c:95
+msgid "Scene filter"
+msgstr "场景滤镜"
+
+#: modules/video_filter/scene.c:96
+msgid "Scene video filter"
+msgstr "场景视频滤镜"
+
+#: modules/video_filter/sepia.c:58
+msgid "Sepia intensity"
+msgstr "褐色强度"
+
+#: modules/video_filter/sepia.c:59
+msgid "Intensity of sepia effect"
+msgstr "褐色特效的强度"
+
+#: modules/video_filter/sepia.c:64
+msgid "Sepia video filter"
+msgstr "深褐视频滤镜"
+
+#: modules/video_filter/sepia.c:66
+msgid "Gives video a warmer tone by applying sepia effect"
+msgstr "通过应用褐色特效给视频更温暖的色调"
+
+#: modules/video_filter/sharpen.c:46
+msgid "Sharpen strength (0-2)"
+msgstr "锐化强度 (0-2)"
+
+#: modules/video_filter/sharpen.c:47
+msgid "Set the Sharpen strength, between 0 and 2. Defaults to 0.05."
+msgstr "设置锐化强度，在 0 和 2 之间。默认为 0.05。"
+
+#: modules/video_filter/sharpen.c:59
+msgid "Augment contrast between contours."
+msgstr "增加外形间的反差。"
+
+#: modules/video_filter/sharpen.c:66
+msgid "Sharpen video filter"
+msgstr "锐化视频滤镜"
+
+#: modules/video_filter/subsdelay.c:45
+msgid "Change subtitle delay"
+msgstr "更改字幕延时"
+
+#: modules/video_filter/subsdelay.c:47
+msgid "Delay calculation mode"
+msgstr "延迟计算模式"
+
+#: modules/video_filter/subsdelay.c:49
+msgid ""
+"Absolute delay - add absolute delay to each subtitle. Relative to source "
+"delay - multiply subtitle delay. Relative to source content - determine "
+"subtitle delay from its content (text)."
+msgstr ""
+"绝对延迟 - 为每个字幕添加绝对延迟。相对源延迟 - 字幕延迟相乘。相对源内容 - 通"
+"过内容 (文字) 决定字幕延迟。"
+
+#: modules/video_filter/subsdelay.c:53
+msgid "Calculation factor"
+msgstr "计算因数"
+
+#: modules/video_filter/subsdelay.c:54
+msgid ""
+"Calculation factor. In Absolute delay mode the factor represents seconds."
+msgstr "计算系数。绝对延迟模式下系数为秒数。"
+
+#: modules/video_filter/subsdelay.c:57
+msgid "Maximum overlapping subtitles"
+msgstr "最大重叠字幕数"
+
+#: modules/video_filter/subsdelay.c:58
+msgid "Maximum number of subtitles allowed at the same time."
+msgstr "允许同时加载的最大字幕数目。"
+
+#: modules/video_filter/subsdelay.c:60
+msgid "Minimum alpha value"
+msgstr "最小透明度值"
+
+#: modules/video_filter/subsdelay.c:62
+msgid ""
+"Alpha value of the earliest subtitle, where 0 is fully transparent and 255 "
+"is fully opaque."
+msgstr "最早先字幕的透明度值，0 为完全透明，255 为完全不透明。"
+
+#: modules/video_filter/subsdelay.c:64
+msgid "Interval between two disappearances"
+msgstr "两次出现之间的间隔"
+
+#: modules/video_filter/subsdelay.c:66
+msgid ""
+"Minimum time (in milliseconds) that subtitle should stay after its "
+"predecessor has disappeared (subtitle delay will be extended to meet this "
+"requirement)."
+msgstr ""
+"下一条字幕出现之前，前一条字幕应停留的最短时间 (单位为毫秒) (字幕延迟将延长以"
+"满足此要求)。"
+
+#: modules/video_filter/subsdelay.c:69
+msgid "Interval between disappearance and appearance"
+msgstr "消失与出现之间的间隔"
+
+#: modules/video_filter/subsdelay.c:71
+msgid ""
+"Minimum time (in milliseconds) between subtitle disappearance and newer "
+"subtitle appearance (earlier subtitle delay will be extended to fill the "
+"gap)."
+msgstr ""
+"字幕消失与下一条字幕出现之间的最短时间 (单位为毫秒) (前一条字幕的延迟将延长以"
+"填满空隙)。"
+
+#: modules/video_filter/subsdelay.c:74
+msgid "Interval between appearance and disappearance"
+msgstr "出现与消失之间的间隔"
+
+#: modules/video_filter/subsdelay.c:76
+msgid ""
+"Minimum time (in milliseconds) that subtitle should stay after newer "
+"subtitle has appeared (earlier subtitle delay will be shortened to avoid the "
+"overlap)."
+msgstr ""
+"下一条字幕出现后字幕应停留的最短时间 (单位为毫秒) (上一条字幕的延迟将缩短以避"
+"免重叠)。"
+
+#: modules/video_filter/subsdelay.c:80
+msgid "Absolute delay"
+msgstr "绝对延迟"
+
+#: modules/video_filter/subsdelay.c:80
+msgid "Relative to source delay"
+msgstr "相对源延迟"
+
+#: modules/video_filter/subsdelay.c:81
+msgid "Relative to source content"
+msgstr "相对源内容"
+
+#: modules/video_filter/subsdelay.c:274
+msgid "Subsdelay"
+msgstr "字幕延迟"
+
+#: modules/video_filter/subsdelay.c:291
+msgid "Overlap fix"
+msgstr "重叠修复"
+
+#: modules/video_filter/transform.c:47
+msgid "Transform type"
+msgstr "变换类型"
+
+#: modules/video_filter/transform.c:53
+msgid "Transpose"
+msgstr "转置"
+
+#: modules/video_filter/transform.c:53
+msgid "Anti-transpose"
+msgstr "逆向转置"
+
+#: modules/video_filter/transform.c:56
+msgid "Video transformation filter"
+msgstr "视频转换滤镜"
+
+#: modules/video_filter/transform.c:57
+msgid "Transformation"
+msgstr "变化"
+
+#: modules/video_filter/transform.c:58
+msgid "Rotate or flip the video"
+msgstr "旋转或翻转视频"
+
+#: modules/video_filter/vhs.c:108
+#, fuzzy
+msgid "VHS movie effect video filter"
+msgstr "动态检测视频滤镜"
+
+#: modules/video_filter/vhs.c:109
+msgid "VHS movie"
+msgstr ""
+
+#: modules/video_filter/wave.c:53
+msgid "Wave video filter"
+msgstr "波形视频滤镜"
+
+#: modules/video_filter/wave.c:54
+msgid "Wave"
+msgstr "波形"
+
+#: modules/video_filter/yuvp.c:47
+msgid "YUVP converter"
+msgstr "YUVP 转换器"
+
+#: modules/video_output/aa.c:56
+msgid "ASCII Art"
+msgstr "字符艺术"
+
+#: modules/video_output/aa.c:59
+msgid "ASCII-art video output"
+msgstr "字符艺术视频输出"
+
+#: modules/video_output/android/nativewindow.c:53
+#, fuzzy
+msgid "ANativeWindow"
+msgstr "活动窗口"
+
+#: modules/video_output/android/nativewindow.c:54
+#, fuzzy
+msgid "Android native window"
+msgstr "活动窗口"
+
+#: modules/video_output/android/opaque.c:47
+#, fuzzy
+msgid "Android MediaCodec direct rendering video output"
+msgstr "Android Surface 视频输出"
+
+#: modules/video_output/android/surface.c:52 modules/video_output/yuv.c:44
+msgid "Chroma used"
+msgstr "使用了色度"
+
+#: modules/video_output/android/surface.c:54
+msgid "Force use of a specific chroma for output. Default is RGB32."
+msgstr "强制输出使用指定的色度。默认为 RGB32。"
+
+#: modules/video_output/android/surface.c:65
+msgid "Android Surface video output"
+msgstr "Android Surface 视频输出"
+
+#: modules/video_output/caca.c:56
+msgid "Color ASCII art video output"
+msgstr "彩色字符艺术视频输出"
+
+#: modules/video_output/caopengllayer.m:53
+msgid "Core Animation OpenGL Layer (Mac OS X)"
+msgstr "核心动画 OpenGL 层 (Mac OS X)"
+
+#: modules/video_output/decklink.cpp:70
+msgid "Timelength after which we assume there is no signal."
+msgstr ""
+
+#: modules/video_output/decklink.cpp:72
+msgid ""
+"Timelength after which we assume there is no signal.\n"
+"After this delay we black out the video."
+msgstr ""
+
+#: modules/video_output/decklink.cpp:76
+msgid "Picture to display on input signal loss."
+msgstr ""
+
+#: modules/video_output/decklink.cpp:79
+msgid "Output card"
+msgstr "输出卡"
+
+#: modules/video_output/decklink.cpp:81
+msgid "DeckLink output card, if multiple exist. The cards are numbered from 0."
+msgstr "要使用的 DeckLink 捕获卡，如果存在多个。卡的编号从 0 开始。"
+
+#: modules/video_output/decklink.cpp:84
+msgid "Desired output mode"
+msgstr "所需输出模式"
+
+#: modules/video_output/decklink.cpp:86
+msgid ""
+"Desired output mode for DeckLink output. This value should be a FOURCC code "
+"in textual form, e.g. \"ntsc\"."
+msgstr "DeckLink 输出所需输出模式。值应为文本形式的 FOURCC 代码，如“ntsc”。"
+
+#: modules/video_output/decklink.cpp:92
+msgid "Audio connection for DeckLink output."
+msgstr "DeckLink 输出的音频连接。"
+
+#: modules/video_output/decklink.cpp:97
+msgid ""
+"Audio sampling rate (in hertz) for DeckLink output. 0 disables audio output."
+msgstr "DeckLink 输出的音频采样率 (单位为赫兹)。0 可禁用音频输出。"
+
+#: modules/video_output/decklink.cpp:102
+msgid ""
+"Number of output channels for DeckLink output. Must be 2, 8 or 16. 0 "
+"disables audio output."
+msgstr "DeckLink 输出的输出声道数。必须为 2、8 或 16。0 可禁用音频输出。"
+
+#: modules/video_output/decklink.cpp:107
+msgid "Video connection for DeckLink output."
+msgstr "DeckLink 输出的视频连接。"
+
+#: modules/video_output/decklink.cpp:111
+msgid "Use 10 bits per pixel for video frames."
+msgstr "视频帧每像素使用 10 位。"
+
+#: modules/video_output/decklink.cpp:177
+msgid "DecklinkOutput"
+msgstr "Decklink输出"
+
+#: modules/video_output/decklink.cpp:178
+msgid "output module to write to Blackmagic SDI card"
+msgstr "写入 Blackmagic SDI 卡的输出模块"
+
+#: modules/video_output/decklink.cpp:179
+msgid "Decklink General Options"
+msgstr "Decklink 常规选项"
+
+#: modules/video_output/decklink.cpp:184
+msgid "Decklink Video Output module"
+msgstr "Decklink 视频输出模块"
+
+#: modules/video_output/decklink.cpp:189
+msgid "Decklink Video Options"
+msgstr "Decklink 视频选项"
+
+#: modules/video_output/decklink.cpp:204
+msgid "Decklink Audio Output module"
+msgstr "Decklink 音频输出模块"
+
+#: modules/video_output/decklink.cpp:209
+msgid "Decklink Audio Options"
+msgstr "Decklink 音频选项"
+
+#: modules/video_output/directfb.c:50
+msgid "DirectFB video output http://www.directfb.org/"
+msgstr "DirectFB 视频输出 http://www.directfb.org/"
+
+#: modules/video_output/drawable.c:34
+msgid "Window handle (HWND)"
+msgstr "窗口处理 (HWND)"
+
+#: modules/video_output/drawable.c:36 modules/video_output/xcb/window.c:50
+msgid ""
+"Video will be embedded in this pre-existing window. If zero, a new window "
+"will be created."
+msgstr "视频将嵌入在之前存在的这个窗口。如果为零，则将创建新窗口。"
+
+#: modules/video_output/drawable.c:46 modules/video_output/xcb/window.c:76
+msgid "Drawable"
+msgstr "可绘制的"
+
+#: modules/video_output/drawable.c:47 modules/video_output/xcb/window.c:77
+msgid "Embedded window video"
+msgstr "嵌入窗口视频"
+
+#: modules/video_output/egl.c:47
+msgid "EGL"
+msgstr "EGL"
+
+#: modules/video_output/egl.c:48
+msgid "EGL extension for OpenGL"
+msgstr "OpenGL EGL 扩展"
+
+#: modules/video_output/fb.c:56
+msgid "Framebuffer device"
+msgstr "帧缓冲设备"
+
+#: modules/video_output/fb.c:58
+msgid "Framebuffer device to use for rendering (usually /dev/fb0)."
+msgstr "要用于渲染的帧缓冲设备 (通常是 /dev/fb0)。"
+
+#: modules/video_output/fb.c:60
+msgid "Run fb on current tty"
+msgstr "在当前的 tty 运行 fb"
+
+#: modules/video_output/fb.c:62
+msgid ""
+"Run framebuffer on current TTY device (default enabled). (disable tty "
+"handling with caution)"
+msgstr "在当前的 TTY 设备上运行帧缓冲 (默认开启)。(请小心关闭 tty 处理)"
+
+#: modules/video_output/fb.c:65
+msgid "Framebuffer resolution to use"
+msgstr "要使用的帧缓冲分辨率"
+
+#: modules/video_output/fb.c:67
+msgid ""
+"Select the resolution for the framebuffer. Currently it supports the values "
+"0=QCIF 1=CIF 2=NTSC 3=PAL, 4=auto (default 4=auto)"
+msgstr ""
+"选择帧缓冲的分辨率。当前它支持值 0=QCIF 1=CIF 2=NTSC 3=PAL, 4=自动 (默认为 4="
+"自动)"
+
+#: modules/video_output/fb.c:70
+msgid "Framebuffer uses hw acceleration"
+msgstr "帧缓冲使用硬件加速"
+
+#: modules/video_output/fb.c:72
+msgid ""
+"If your framebuffer supports hardware acceleration or does double buffering "
+"in hardware then you must disable this option. It then does double buffering "
+"in software."
+msgstr ""
+"如果帧缓冲支持硬件加速或能够通过硬件进行双倍缓冲您就必须关闭此选项。它将会进"
+"行软件的双倍缓冲。"
+
+#: modules/video_output/fb.c:76
+msgid "Image format (default RGB)"
+msgstr "图像格式 (默认 RGB)"
+
+#: modules/video_output/fb.c:77
+msgid ""
+"Chroma fourcc used by the framebuffer. Default is RGB since the fb device "
+"has no way to report its chroma."
+msgstr ""
+"帧缓冲设备所用的色度 fourcc。默认为 RGB，因为帧缓冲设备无法报告其色度。"
+
+#: modules/video_output/fb.c:95
+msgid "GNU/Linux framebuffer video output"
+msgstr "GNU/Linux 帧缓冲视频输出"
+
+#: modules/video_output/gl.c:40
+msgid "OpenGL extension"
+msgstr "OpenGL 扩展"
+
+#: modules/video_output/gl.c:41
+msgid "OpenGL ES 2 extension"
+msgstr "OpenGL ES 2 扩展"
+
+#: modules/video_output/gl.c:42
+msgid "OpenGL ES extension"
+msgstr "OpenGL ES 扩展"
+
+#: modules/video_output/gl.c:44
+msgid "Extension through which to use the Open Graphics Library (OpenGL)."
+msgstr "用来使用开放图形库 (OpenGL) 的扩展。"
+
+#: modules/video_output/gl.c:50
+msgid "OpenGL ES2"
+msgstr "OpenGL ES2"
+
+#: modules/video_output/gl.c:51
+msgid "OpenGL for Embedded Systems 2 video output"
+msgstr "OpenGL 嵌入式系统版 2 视频输出"
+
+#: modules/video_output/gl.c:61
+msgid "OpenGL ES"
+msgstr "OpenGL ES"
+
+#: modules/video_output/gl.c:62
+msgid "OpenGL for Embedded Systems video output"
+msgstr "OpenGL 嵌入式系统版视频输出"
+
+#: modules/video_output/gl.c:71
+msgid "OpenGL"
+msgstr "OpenGL"
+
+#: modules/video_output/gl.c:72
+msgid "OpenGL video output (experimental)"
+msgstr "OpenGL 视频输出 (实验性)"
+
+#: modules/video_output/glx.c:42 modules/video_output/xcb/glx.c:48
+msgid "GLX"
+msgstr "GLX"
+
+#: modules/video_output/glx.c:43
+msgid "GLX extension for OpenGL"
+msgstr "OpenGL 的 GLX 扩展"
+
+#: modules/video_output/ios2.m:72
+msgid "iOS OpenGL video output"
+msgstr "iOS OpenGL 视频输出"
+
+#: modules/video_output/kva.c:50 modules/gui/qt4/ui/sprefs_video.h:333
+msgid "Enable a workaround for T23"
+msgstr "启用 T23 兼容措施"
+
+#: modules/video_output/kva.c:52
+msgid ""
+"Enable this option if the diagonal stripes are displayed when the window "
+"size is equal to or smaller than the movie size."
+msgstr "如果窗口尺寸等于或小于电影尺寸时显示斜条纹，请启用本项。"
+
+#: modules/video_output/kva.c:55 modules/gui/qt4/ui/sprefs_video.h:334
+msgid "Video mode"
+msgstr "视频模式"
+
+#: modules/video_output/kva.c:57
+msgid "Select a proper video mode to be used by KVA."
+msgstr "选择用于 KVA 的合适的视频模式。"
+
+#: modules/video_output/kva.c:62
+msgid "SNAP"
+msgstr "SNAP"
+
+#: modules/video_output/kva.c:62
+msgid "WarpOverlay!"
+msgstr "WarpOverlay!"
+
+#: modules/video_output/kva.c:62
+msgid "VMAN"
+msgstr "VMAN"
+
+#: modules/video_output/kva.c:62
+msgid "DIVE"
+msgstr "DIVE"
+
+#: modules/video_output/kva.c:72
+msgid "K Video Acceleration video output"
+msgstr "K Video 加速视频输出"
+
+#: modules/video_output/macosx.m:86
+#, fuzzy
+msgid "Mac OS X OpenGL video output"
+msgstr "iOS OpenGL 视频输出"
+
+#: modules/video_output/mmal.c:52
+#, fuzzy
+msgid "VideoCore layer where the video is displayed."
+msgstr "视频截图将要储存的目录。"
+
+#: modules/video_output/mmal.c:53
+msgid ""
+"VideoCore layer where the video is displayed. Subpictures are displayed "
+"directly above and a black background directly below."
+msgstr ""
+
+#: modules/video_output/mmal.c:56 modules/video_output/mmal.c:57
+msgid "Adjust HDMI refresh rate to the video."
+msgstr ""
+
+#: modules/video_output/mmal.c:63
+msgid "MMAL vout"
+msgstr ""
+
+#: modules/video_output/mmal.c:64
+msgid "MMAL-based vout plugin for Raspberry Pi"
+msgstr ""
+
+#: modules/video_output/msw/direct2d.c:51
+msgid "Video output for Windows 7/Windows Vista with Platform update"
+msgstr "供 Windows 7/Windows Vista 更新版本使用的视频输出"
+
+#: modules/video_output/msw/direct2d.c:58
+msgid "Direct2D video output"
+msgstr "Direct2D 视频输出"
+
+#: modules/video_output/msw/direct3d.c:60
+msgid "The desktop mode allows you to display the video on the desktop."
+msgstr "桌面模式允许您在桌面显示视频。"
+
+#: modules/video_output/msw/direct3d.c:62
+msgid "Use hardware blending support"
+msgstr "使用硬件合成支持"
+
+#: modules/video_output/msw/direct3d.c:64
+msgid "Try to use hardware acceleration for subtitle/OSD blending."
+msgstr "尝试为字幕/OSD 合成使用硬件加速。"
+
+#: modules/video_output/msw/direct3d.c:66
+msgid "Pixel Shader"
+msgstr ""
+
+#: modules/video_output/msw/direct3d.c:68
+#, fuzzy
+msgid "Choose a pixel shader to apply."
+msgstr "清除播放列表"
+
+#: modules/video_output/msw/direct3d.c:69
+#, fuzzy
+msgid "Path to HLSL file"
+msgstr "OSD 菜单图像的路径"
+
+#: modules/video_output/msw/direct3d.c:70
+#, fuzzy
+msgid "Path to an HLSL file containing a single pixel shader."
+msgstr "Zip 压缩包中的媒体路径"
+
+#: modules/video_output/msw/direct3d.c:72
+#, fuzzy
+msgid "HLSL File"
+msgstr "保存文件"
+
+#: modules/video_output/msw/direct3d.c:74
+msgid "Recommended video output for Windows Vista and later versions"
+msgstr "推荐供 Windows Vista 及更新版本使用的视频输出"
+
+#: modules/video_output/msw/direct3d.c:81
+msgid "Direct3D video output"
+msgstr "Direct3D 视频输出"
+
+#: modules/video_output/msw/directx.c:65 modules/gui/qt4/ui/sprefs_video.h:326
+msgid "Use hardware YUV->RGB conversions"
+msgstr "使用硬件 YUV->RGB 转换"
+
+#: modules/video_output/msw/directx.c:67
+msgid ""
+"Try to use hardware acceleration for YUV->RGB conversions. This option "
+"doesn't have any effect when using overlays."
+msgstr "尝试为 YUV->RGB 转换使用硬件加速。此选项在使用覆盖时没有任何效果。"
+
+#: modules/video_output/msw/directx.c:70
+msgid "Use video buffers in system memory"
+msgstr "在系统内存中使用系统缓存"
+
+#: modules/video_output/msw/directx.c:72
+msgid ""
+"Create video buffers in system memory instead of video memory. This isn't "
+"recommended as usually using video memory allows benefiting from more "
+"hardware acceleration (like rescaling or YUV->RGB conversions). This option "
+"doesn't have any effect when using overlays."
+msgstr ""
+"在系统内存中创建视频缓冲代替视频内存。不推荐这么做，因为通常使用显存可从硬件"
+"加速中获益 (如调整大小或 YUV->RGB 转换)。此选项在使用覆盖层时将没有任何效果。"
+
+#: modules/video_output/msw/directx.c:77
+msgid "Use triple buffering for overlays"
+msgstr "为覆盖使用三重缓冲"
+
+#: modules/video_output/msw/directx.c:79
+msgid ""
+"Try to use triple buffering when using YUV overlays. That results in much "
+"better video quality (no flickering)."
+msgstr "在使用 YUV 覆盖时尝试使用三重缓冲。这将会有更高的视频质量 (不闪烁)。"
+
+#: modules/video_output/msw/directx.c:82
+msgid "Name of desired display device"
+msgstr "想要的显示设备名称"
+
+#: modules/video_output/msw/directx.c:83
+msgid ""
+"In a multiple monitor configuration, you can specify the Windows device name "
+"of the display that you want the video window to open on. For example, \"\\"
+"\\.\\DISPLAY1\" or \"\\\\.\\DISPLAY2\"."
+msgstr ""
+"在一个多显示器设置中您可以指定您要视频窗口在哪台设备中显示的 Windows 设备名"
+"称。例如，\"\\\\.\\DISPLAY1\" 或 \"\\\\.\\DISPLAY2\"。"
+
+#: modules/video_output/msw/directx.c:88
+msgid ""
+"Recommended video output for Windows XP. Incompatible with Vista's Aero "
+"interface"
+msgstr "推荐供 Windows XP 使用的视频输出。与 Vista 的 Aero 接口不兼容"
+
+#: modules/video_output/msw/directx.c:98
+msgid "DirectX (DirectDraw) video output"
+msgstr "DirectX (DirectDraw) 视频输出"
+
+#: modules/video_output/msw/directx.c:208
+msgid "Wallpaper"
+msgstr "壁纸"
+
+#: modules/video_output/msw/glwin32.c:45
+msgid "GPU affinity"
+msgstr ""
+
+#: modules/video_output/msw/glwin32.c:51
+msgid "OpenGL video output"
+msgstr "OpenGL 视频输出"
+
+#: modules/video_output/msw/wingdi.c:52
+msgid "Windows GDI video output"
+msgstr "Windows GDI 视频输出"
+
+#: modules/video_output/sdl.c:56
+msgid "SDL chroma format"
+msgstr "SDL 色度格式"
+
+#: modules/video_output/sdl.c:58
+msgid ""
+"Force the SDL renderer to use a specific chroma format instead of trying to "
+"improve performances by using the most efficient one."
+msgstr ""
+"强制 SDL 渲染器使用指定的色度格式替代尝试通过使用最有效的一个改进性能。"
+
+#: modules/video_output/sdl.c:65
+msgid "Simple DirectMedia Layer video output"
+msgstr "Simple DirectMedia Layer 视频输出"
+
+#: modules/video_output/vdummy.c:36
+msgid "Dummy image chroma format"
+msgstr "空图像色度格式"
+
+#: modules/video_output/vdummy.c:38
+msgid ""
+"Force the dummy video output to create images using a specific chroma format "
+"instead of trying to improve performances by using the most efficient one."
+msgstr ""
+"强制强制空视频输出创建的图像使用指定的色度格式代替选择最有效的格式改进性能。"
+
+#: modules/video_output/vdummy.c:48
+msgid "Dummy video output"
+msgstr "空视频输出"
+
+#: modules/video_output/vdummy.c:58
+msgid "Statistics video output"
+msgstr "统计视频输出"
+
+#: modules/video_output/vmem.c:43
+msgid "Video memory buffer width."
+msgstr "视频内存缓冲宽度。"
+
+#: modules/video_output/vmem.c:46
+msgid "Video memory buffer height."
+msgstr "视频内存缓冲高度。"
+
+#: modules/video_output/vmem.c:48
+msgid "Pitch"
+msgstr "节拍"
+
+#: modules/video_output/vmem.c:49
+msgid "Video memory buffer pitch in bytes."
+msgstr "以字节为单位的视频内存缓冲节拍。"
+
+#: modules/video_output/vmem.c:51
+msgid "Chroma"
+msgstr "色度"
+
+#: modules/video_output/vmem.c:52
+msgid ""
+"Output chroma for the memory image as a 4-character string, eg. \"RV32\"."
+msgstr "用于内存图像的 4 字节输出色度，例如 \"RV32\"。"
+
+#: modules/video_output/vmem.c:59
+msgid "Video memory output"
+msgstr "显存输出"
+
+#: modules/video_output/vmem.c:60
+msgid "Video memory"
+msgstr "显存"
+
+#: modules/video_output/xcb/glx.c:49
+msgid "OpenGL GLX video output (XCB)"
+msgstr "OpenGL GLX 视频输出 (XCB)"
+
+#: modules/video_output/xcb/window.c:43
+msgid "X11 display"
+msgstr "X11 显示"
+
+#: modules/video_output/xcb/window.c:45
+msgid ""
+"Video will be rendered with this X11 display. If empty, the default display "
+"will be used."
+msgstr "视频将通过此 X11 显示器渲染。如果为空，则将使用默认显示器。"
+
+#: modules/video_output/xcb/window.c:48
+msgid "X11 window ID"
+msgstr "X11 窗口 ID"
+
+#: modules/video_output/xcb/window.c:62
+msgid "X window"
+msgstr "X 窗口"
+
+#: modules/video_output/xcb/window.c:63
+msgid "X11 video window (XCB)"
+msgstr "X11 视频窗口 (XCB)"
+
+#. xgettext: This is a plain ASCII spelling of "VLC media player"
+#. for the ICCCM window name. This must be pure ASCII.
+#. The limitation is partially with ICCCM and partially with VLC.
+#. For Latin script languages, you may need to strip accents.
+#. For other scripts, you will need to transliterate into Latin.
+#: modules/video_output/xcb/window.c:282
+msgctxt "ASCII"
+msgid "VLC media player"
+msgstr "VLC media player"
+
+#. xgettext: This is a plain ASCII spelling of "VLC"
+#. for the ICCCM window name. This must be pure ASCII.
+#: modules/video_output/xcb/window.c:287
+msgctxt "ASCII"
+msgid "VLC"
+msgstr "VLC"
+
+#: modules/video_output/xcb/window.c:316
+msgid "VLC"
+msgstr "VLC"
+
+#: modules/video_output/xcb/x11.c:48
+msgid "X11"
+msgstr "X11"
+
+#: modules/video_output/xcb/x11.c:49
+msgid "X11 video output (XCB)"
+msgstr "X11 视频输出 (XCB)"
+
+#: modules/video_output/xcb/xvideo.c:44
+msgid "XVideo adaptor number"
+msgstr "XVideo 适配器编号"
+
+#: modules/video_output/xcb/xvideo.c:46
+msgid ""
+"XVideo hardware adaptor to use. By default, VLC will use the first "
+"functional adaptor."
+msgstr "要使用的 XVideo 适配器。VLC 默认将使用首个可用的适配器。"
+
+#: modules/video_output/xcb/xvideo.c:49
+msgid "XVideo format id"
+msgstr "XVideo 格式 id"
+
+#: modules/video_output/xcb/xvideo.c:51
+msgid ""
+"XVideo image format id to use. By default, VLC will try to use the best "
+"match for the video being played."
+msgstr ""
+"要使用的 XVideo 图像格式。VLC 默认会尝试使用与正在播放视频最匹配的格式。"
+
+#: modules/video_output/xcb/xvideo.c:62
+msgid "XVideo"
+msgstr "XVideo"
+
+#: modules/video_output/xcb/xvideo.c:63
+msgid "XVideo output (XCB)"
+msgstr "XVideo 输出 (XCB)"
+
+#: modules/video_output/xcb/xvideo.c:335
+msgid "Video acceleration not available"
+msgstr "无可用视频加速"
+
+#: modules/video_output/xcb/xvideo.c:336
+#, c-format
+msgid ""
+"The XVideo rendering acceleration driver does not support the required "
+"resolution of %ux%u pixels but %<PRIu32>x%<PRIu32> pixels instead.\n"
+"Acceleration will thus be disabled. Performance may be degraded severely if "
+"the resolution is large."
+msgstr ""
+"XVideo 渲染加速驱动程序不支持所需的分辨率 %ux%u px 但支持 %<PRIu32>x"
+"%<PRIu32> px。\n"
+"因此加速将禁用。若分辨率较大，性能可能会严重下降。"
+
+#: modules/video_output/yuv.c:41
+msgid "device, fifo or filename"
+msgstr "设备，先进先出队列或文件名"
+
+#: modules/video_output/yuv.c:42
+msgid "device, fifo or filename to write yuv frames too."
+msgstr "写入 YUV 帧的目的设备、FIFO 队列或文件名。"
+
+#: modules/video_output/yuv.c:46
+msgid "Force use of a specific chroma for output. Default is I420."
+msgstr "强制为输出使用指定的色度。默认是 I420。"
+
+#: modules/video_output/yuv.c:48
+msgid "YUV4MPEG2 header (default disabled)"
+msgstr "YUV4MPEG2 头部 (默认关闭)"
+
+#: modules/video_output/yuv.c:49
+msgid ""
+"The YUV4MPEG2 header is compatible with mplayer yuv video output and "
+"requires YV12/I420 fourcc. By default vlc writes the fourcc of the picture "
+"frame into the output destination."
+msgstr ""
+"mplayer yuv 视频输出兼容 YUV4MPEG2 头，要求 fourcc 为 YV12/I420。vlc 默认将帧"
+"的 fourcc 写入输出目标处。"
+
+#: modules/video_output/yuv.c:59
+msgid "YUV output"
+msgstr "YUV 输出"
+
+#: modules/video_output/yuv.c:60
+msgid "YUV video output"
+msgstr "YUV 视频输出"
+
+#: modules/video_splitter/clone.c:40
+msgid "Number of video windows in which to clone the video."
+msgstr "要克隆的视频窗口数量。"
+
+#: modules/video_splitter/clone.c:43
+msgid "Video output modules"
+msgstr "视频输出模块"
+
+#: modules/video_splitter/clone.c:44
+msgid ""
+"You can use specific video output modules for the clones. Use a comma-"
+"separated list of modules."
+msgstr "您可以指定用于克隆的视频输出模块。使用一个逗号分隔的模块列表。"
+
+#: modules/video_splitter/clone.c:47
+msgid "Duplicate your video to multiple windows and/or video output modules"
+msgstr "将视频复制到多个窗口和/或视频输出模块"
+
+#: modules/video_splitter/clone.c:55
+msgid "Clone video filter"
+msgstr "克隆视频滤镜"
+
+#: modules/video_splitter/panoramix.c:61
+msgid ""
+"Select the number of horizontal video windows in which to split the video"
+msgstr "选择被分割视频的垂直视频窗口数量"
+
+#: modules/video_splitter/panoramix.c:65
+msgid "Select the number of vertical video windows in which to split the video"
+msgstr "选择被分割视频的水平视频窗口数量"
+
+#: modules/video_splitter/panoramix.c:68 modules/video_splitter/wall.c:54
+msgid "Active windows"
+msgstr "活动窗口"
+
+#: modules/video_splitter/panoramix.c:69 modules/video_splitter/wall.c:55
+msgid "Comma-separated list of active windows, defaults to all"
+msgstr "活动窗口列表 (以逗号为分隔符)，默认为全部"
+
+#: modules/video_splitter/panoramix.c:74
+msgid "Split the video in multiple windows to display on a wall of screens"
+msgstr "将视频切为多个窗口以便在屏幕墙上显示"
+
+#: modules/video_splitter/panoramix.c:81
+msgid "Panoramix: wall with overlap video filter"
+msgstr "摄像头: 覆盖视频滤镜的墙"
+
+#: modules/video_splitter/panoramix.c:82
+msgid "Panoramix"
+msgstr "摄像头"
+
+#: modules/video_splitter/panoramix.c:94
+msgid "length of the overlapping area (in %)"
+msgstr "重叠面积区域长度 (以 %)"
+
+#: modules/video_splitter/panoramix.c:95
+msgid "Select in percent the length of the blended zone"
+msgstr "选择以百分比为单位的混合区域长度"
+
+#: modules/video_splitter/panoramix.c:98
+msgid "height of the overlapping area (in %)"
+msgstr "重叠面积区域高度 (以 %)"
+
+#: modules/video_splitter/panoramix.c:99
+msgid "Select in percent the height of the blended zone (case of 2x2 wall)"
+msgstr "选择混合区域的百分比高度 (2x2 墙)"
+
+#: modules/video_splitter/panoramix.c:102
+msgid "Attenuation"
+msgstr "衰减"
+
+#: modules/video_splitter/panoramix.c:103
+msgid ""
+"Check this option if you want attenuate blended zone by this plug-in (if "
+"option is unchecked, attenuate is made by opengl)"
+msgstr ""
+"如果您希望通过此插件衰减混合区域，请选择此选项 (如果选项未选中，衰减将由 "
+"OpenGL 执行)"
+
+#: modules/video_splitter/panoramix.c:106
+msgid "Attenuation, begin (in %)"
+msgstr "衰减, 开始 (在 %)"
+
+#: modules/video_splitter/panoramix.c:107
+msgid ""
+"Select in percent the Lagrange coefficient of the beginning blended zone"
+msgstr "选择混合区域开始的拉格朗日系数百分比"
+
+#: modules/video_splitter/panoramix.c:110
+msgid "Attenuation, middle (in %)"
+msgstr "衰减, 中 (在 %)"
+
+#: modules/video_splitter/panoramix.c:111
+msgid ""
+"Select in percent the Lagrange coefficient of the middle of blended zone"
+msgstr "选择混合区域中部的拉格朗日系数百分比"
+
+#: modules/video_splitter/panoramix.c:114
+msgid "Attenuation, end (in %)"
+msgstr "衰减, 末尾 (在 %)"
+
+#: modules/video_splitter/panoramix.c:115
+msgid "Select in percent the Lagrange coefficient of the end of blended zone"
+msgstr "选择混合区域末尾的拉格朗日系数百分比"
+
+#: modules/video_splitter/panoramix.c:118
+msgid "middle position (in %)"
+msgstr "中间位置 (在 %)"
+
+#: modules/video_splitter/panoramix.c:119
+msgid ""
+"Select in percent (50 is center) the position of the middle point (Lagrange) "
+"of blended zone"
+msgstr "选择混合区域中间点 (拉格朗日系数) 的百分比位置 (50 为中间)"
+
+#: modules/video_splitter/panoramix.c:121
+msgid "Gamma (Red) correction"
+msgstr "伽玛 (红) 矫正"
+
+#: modules/video_splitter/panoramix.c:122
+msgid ""
+"Select the gamma for the correction of blended zone (Red or Y component)"
+msgstr "选择混合区域的伽玛矫正 (红或 Y 部分)"
+
+#: modules/video_splitter/panoramix.c:125
+msgid "Gamma (Green) correction"
+msgstr "伽玛 (绿) 矫正"
+
+#: modules/video_splitter/panoramix.c:126
+msgid ""
+"Select the gamma for the correction of blended zone (Green or U component)"
+msgstr "选择混合区域的伽玛矫正 (绿或 U 部分)"
+
+#: modules/video_splitter/panoramix.c:129
+msgid "Gamma (Blue) correction"
+msgstr "伽玛 (蓝) 矫正"
+
+#: modules/video_splitter/panoramix.c:130
+msgid ""
+"Select the gamma for the correction of blended zone (Blue or V component)"
+msgstr "选择混合区域的伽玛矫正 (蓝或 V 部分)"
+
+#: modules/video_splitter/panoramix.c:133
+msgid "Black Crush for Red"
+msgstr "用于红色的黑压挤"
+
+#: modules/video_splitter/panoramix.c:134
+msgid "Select the Black Crush of blended zone (Red or Y component)"
+msgstr "选择混合区域的黑压挤 (红或 Y 部分)"
+
+#: modules/video_splitter/panoramix.c:135
+msgid "Black Crush for Green"
+msgstr "用于绿色的黑压挤"
+
+#: modules/video_splitter/panoramix.c:136
+msgid "Select the Black Crush of blended zone (Green or U component)"
+msgstr "选择混合区域的黑压挤 (绿或 U 部分)"
+
+#: modules/video_splitter/panoramix.c:137
+msgid "Black Crush for Blue"
+msgstr "用于蓝色的黑压挤"
+
+#: modules/video_splitter/panoramix.c:138
+msgid "Select the Black Crush of blended zone (Blue or V component)"
+msgstr "选择混合区域的黑压挤 (蓝或 V 部分)"
+
+#: modules/video_splitter/panoramix.c:140
+msgid "White Crush for Red"
+msgstr "用于红色白压挤"
+
+#: modules/video_splitter/panoramix.c:141
+msgid "Select the White Crush of blended zone (Red or Y component)"
+msgstr "选择混合区域的白压挤 (红或 Y 部分)"
+
+#: modules/video_splitter/panoramix.c:142
+msgid "White Crush for Green"
+msgstr "用于绿色的白压挤"
+
+#: modules/video_splitter/panoramix.c:143
+msgid "Select the White Crush of blended zone (Green or U component)"
+msgstr "选择混合区域的白压挤 (绿或 U 部分)"
+
+#: modules/video_splitter/panoramix.c:144
+msgid "White Crush for Blue"
+msgstr "用蓝色的白压挤"
+
+#: modules/video_splitter/panoramix.c:145
+msgid "Select the White Crush of blended zone (Blue or V component)"
+msgstr "选择混合区域的白压挤 (蓝或 V 部分)"
+
+#: modules/video_splitter/panoramix.c:147
+msgid "Black Level for Red"
+msgstr "红色的黑等级"
+
+#: modules/video_splitter/panoramix.c:148
+msgid "Select the Black Level of blended zone (Red or Y component)"
+msgstr "选择混合区域的黑等级 (红或 Y 部分)"
+
+#: modules/video_splitter/panoramix.c:149
+msgid "Black Level for Green"
+msgstr "绿色的黑等级"
+
+#: modules/video_splitter/panoramix.c:150
+msgid "Select the Black Level of blended zone (Green or U component)"
+msgstr "选择混合区域的黑等级 (绿或 U 部分)"
+
+#: modules/video_splitter/panoramix.c:151
+msgid "Black Level for Blue"
+msgstr "蓝色的黑等级"
+
+#: modules/video_splitter/panoramix.c:152
+msgid "Select the Black Level of blended zone (Blue or V component)"
+msgstr "选择混合区域的黑等级 (蓝或 V 部分)"
+
+#: modules/video_splitter/panoramix.c:154
+msgid "White Level for Red"
+msgstr "红色的白等级"
+
+#: modules/video_splitter/panoramix.c:155
+msgid "Select the White Level of blended zone (Red or Y component)"
+msgstr "选择混合区域的白等级 (红或 Y 部分)"
+
+#: modules/video_splitter/panoramix.c:156
+msgid "White Level for Green"
+msgstr "绿色的白等级"
+
+#: modules/video_splitter/panoramix.c:157
+msgid "Select the White Level of blended zone (Green or U component)"
+msgstr "选择混合区域的白等级 (绿或 U 部分)"
+
+#: modules/video_splitter/panoramix.c:158
+msgid "White Level for Blue"
+msgstr "蓝色的白等级"
+
+#: modules/video_splitter/panoramix.c:159
+msgid "Select the White Level of blended zone (Blue or V component)"
+msgstr "选择混合区域的白等级 (蓝或 V 部分)"
+
+#: modules/video_splitter/wall.c:47
+msgid "Number of horizontal windows in which to split the video."
+msgstr "视频分离后的水平窗口数量。"
+
+#: modules/video_splitter/wall.c:51
+msgid "Number of vertical windows in which to split the video."
+msgstr "视频分离后的垂直窗口数量。"
+
+#: modules/video_splitter/wall.c:58
+msgid "Element aspect ratio"
+msgstr "元素高宽比"
+
+#: modules/video_splitter/wall.c:59
+msgid "Aspect ratio of the individual displays building the wall."
+msgstr "显示墙的个别显示高宽比。"
+
+#: modules/video_splitter/wall.c:68
+msgid "Wall video filter"
+msgstr "显示墙滤镜"
+
+#: modules/video_splitter/wall.c:69
+msgid "Image wall"
+msgstr "图像墙"
+
+#: modules/visualization/goom.c:45
+msgid "Goom display width"
+msgstr "显示宽度"
+
+#: modules/visualization/goom.c:46
+msgid "Goom display height"
+msgstr "显示高度"
+
+#: modules/visualization/goom.c:47
+msgid ""
+"This allows you to set the resolution of the Goom display (bigger resolution "
+"will be prettier but more CPU intensive)."
+msgstr ""
+"这将允许您设置 Goom 显示的分辨率 (较高的分辨率比较漂亮但是要消耗更多的 CPU 资"
+"源)。"
+
+#: modules/visualization/goom.c:50
+msgid "Goom animation speed"
+msgstr "Goom 动画速度"
+
+#: modules/visualization/goom.c:51
+msgid ""
+"This allows you to set the animation speed (between 1 and 10, defaults to 6)."
+msgstr "这允许您设置动画的速度 (在 1 到 10 之间，默认为 6)."
+
+#: modules/visualization/goom.c:57
+msgid "Goom"
+msgstr "Goom"
+
+#: modules/visualization/goom.c:58
+msgid "Goom effect"
+msgstr "Goom 效果"
+
+#: modules/visualization/projectm.cpp:51
+msgid "projectM configuration file"
+msgstr "projectM 配置文件"
+
+#: modules/visualization/projectm.cpp:52
+msgid "File that will be used to configure the projectM module."
+msgstr "将被用于 projectM 模块配置的文件。"
+
+#: modules/visualization/projectm.cpp:55
+msgid "projectM preset path"
+msgstr "projectM 预设路径"
+
+#: modules/visualization/projectm.cpp:56
+msgid "Path to the projectM preset directory"
+msgstr "projectM 预设文件目录路径"
+
+#: modules/visualization/projectm.cpp:58
+msgid "Title font"
+msgstr "标题字体"
+
+#: modules/visualization/projectm.cpp:59
+msgid "Font used for the titles"
+msgstr "用于标题的字体"
+
+#: modules/visualization/projectm.cpp:61
+msgid "Font menu"
+msgstr "字体菜单"
+
+#: modules/visualization/projectm.cpp:62
+msgid "Font used for the menus"
+msgstr "用于菜单的字体"
+
+#: modules/visualization/projectm.cpp:65 modules/visualization/vsxu.cpp:56
+msgid "The width of the video window, in pixels."
+msgstr "视频窗口的宽度，以像素为单位。"
+
+#: modules/visualization/projectm.cpp:68 modules/visualization/vsxu.cpp:59
+msgid "The height of the video window, in pixels."
+msgstr "视频窗口的高度，以像素为单位。"
+
+#: modules/visualization/projectm.cpp:70
+msgid "Mesh width"
+msgstr "网状宽度"
+
+#: modules/visualization/projectm.cpp:71
+msgid "The width of the mesh, in pixels."
+msgstr "网状宽度，以像素为单位。"
+
+#: modules/visualization/projectm.cpp:73
+msgid "Mesh height"
+msgstr "网状高度"
+
+#: modules/visualization/projectm.cpp:74
+msgid "The height of the mesh, in pixels."
+msgstr "网状高度，以像素为单位。"
+
+#: modules/visualization/projectm.cpp:76
+msgid "Texture size"
+msgstr "纹理尺寸"
+
+#: modules/visualization/projectm.cpp:77
+msgid "The size of the texture, in pixels."
+msgstr "纹理尺寸，以像素为单位。"
+
+#: modules/visualization/projectm.cpp:100
+msgid "projectM"
+msgstr "projectM"
+
+#: modules/visualization/projectm.cpp:101
+msgid "libprojectM effect"
+msgstr "libprojectM 特效"
+
+#: modules/visualization/visual/visual.c:47
+msgid "Effects list"
+msgstr "效果列表"
+
+#: modules/visualization/visual/visual.c:49
+msgid ""
+"A list of visual effect, separated by commas.\n"
+"Current effects include: dummy, scope, spectrum, spectrometer and vuMeter."
+msgstr ""
+"可视化效果列表，由逗号分隔。\n"
+"当前的效果包括: dummy、scope、频谱、频谱仪与 vuMeter。"
+
+#: modules/visualization/visual/visual.c:55
+msgid "The width of the effects video window, in pixels."
+msgstr "效果视频窗口的宽度，以像素为单位。"
+
+#: modules/visualization/visual/visual.c:59
+msgid "The height of the effects video window, in pixels."
+msgstr "效果视频窗口的高度，以像素为单位。"
+
+#: modules/visualization/visual/visual.c:61
+#, fuzzy
+msgid "FFT window"
+msgstr "X 窗口"
+
+#: modules/visualization/visual/visual.c:63
+msgid "The type of FFT window to use for spectrum-based visualizations."
+msgstr ""
+
+#: modules/visualization/visual/visual.c:65
+#, fuzzy
+msgid "Kaiser window parameter"
+msgstr "覆盖参数"
+
+#: modules/visualization/visual/visual.c:67
+msgid ""
+"The parameter alpha for the Kaiser window. Increasing alpha increases the "
+"main-lobe width and decreases the side-lobe amplitude. "
+msgstr ""
+
+#: modules/visualization/visual/visual.c:70
+msgid "Show 80 bands instead of 20"
+msgstr "显示 80 带替代 20"
+
+#: modules/visualization/visual/visual.c:72
+msgid "More bands for the spectrometer : 80 if enabled else 20."
+msgstr "分光计的更多波段 : 如启用则为 80，否则为 20。"
+
+#: modules/visualization/visual/visual.c:74
+msgid "Number of blank pixels between bands."
+msgstr "在波段间的空像素数量。"
+
+#: modules/visualization/visual/visual.c:76
+msgid "Amplification"
+msgstr "放大"
+
+#: modules/visualization/visual/visual.c:78
+msgid "This is a coefficient that modifies the height of the bands."
+msgstr "这是修改波段高度的系数。"
+
+#: modules/visualization/visual/visual.c:80
+msgid "Draw peaks in the analyzer"
+msgstr "在分析器中描绘峰值"
+
+#: modules/visualization/visual/visual.c:82
+msgid "Enable original graphic spectrum"
+msgstr "开启原始图像光谱"
+
+#: modules/visualization/visual/visual.c:84
+msgid "Enable the \"flat\" spectrum analyzer in the spectrometer."
+msgstr "在分光器中开启 \"平面\" 光谱分析。"
+
+#: modules/visualization/visual/visual.c:86
+msgid "Draw bands in the spectrometer"
+msgstr "在分光器中描绘波段"
+
+#: modules/visualization/visual/visual.c:88
+msgid "Draw the base of the bands"
+msgstr "描绘波段基底"
+
+#: modules/visualization/visual/visual.c:90
+msgid "Base pixel radius"
+msgstr "基础像素半径"
+
+#: modules/visualization/visual/visual.c:92
+msgid "Defines radius size in pixels, of base of bands(beginning)."
+msgstr "定义基础波段的像素半径 (起始)。"
+
+#: modules/visualization/visual/visual.c:94
+msgid "Spectral sections"
+msgstr "光谱区域"
+
+#: modules/visualization/visual/visual.c:96
+msgid "Determines how many sections of spectrum will exist."
+msgstr "光谱将存在多少个区域。"
+
+#: modules/visualization/visual/visual.c:98
+msgid "Peak height"
+msgstr "峰值高度"
+
+#: modules/visualization/visual/visual.c:100
+msgid "Total pixel height of the peak items."
+msgstr "峰值项目的总计像素高度。"
+
+#: modules/visualization/visual/visual.c:102
+msgid "Peak extra width"
+msgstr "像素扩展宽度"
+
+#: modules/visualization/visual/visual.c:104
+msgid "Additions or subtractions of pixels on the peak width."
+msgstr "在像素峰值上添加或减少像素。"
+
+#: modules/visualization/visual/visual.c:106
+msgid "V-plane color"
+msgstr "V 平面颜色"
+
+#: modules/visualization/visual/visual.c:108
+msgid "YUV-Color cube shifting across the V-plane ( 0 - 127 )."
+msgstr "V 平面的立方移位交叉 YUV 颜色 ( 0 - 127 )。"
+
+#: modules/visualization/visual/visual.c:118
+msgid "Visualizer"
+msgstr "可视化"
+
+#: modules/visualization/visual/visual.c:121
+msgid "Visualizer filter"
+msgstr "可视化过滤器"
+
+#: modules/visualization/visual/visual.c:134
+msgid "Spectrum analyser"
+msgstr "光谱分析器"
+
+#: modules/visualization/vsxu.cpp:62 modules/visualization/vsxu.cpp:63
+msgid "vsxu"
+msgstr "vsxu"
+
+#: share/lua/http/dialogs/batch_window.html:28
+msgid "#paste your VLM commands here"
+msgstr "#在此粘贴您的 VLM 命令"
+
+#: share/lua/http/dialogs/batch_window.html:30
+msgid "#separate commands with a new line or a semi-colon"
+msgstr "#以换行或分号分隔命令"
+
+#: share/lua/http/dialogs/browse_window.html:41
+#: share/lua/http/mobile_browse.html:48
+msgid "Play List"
+msgstr "播放列表"
+
+#: share/lua/http/dialogs/create_stream.html:156
+#: modules/gui/qt4/ui/sprefs_audio.h:431 modules/gui/qt4/ui/sprefs_video.h:329
+msgid "Output"
+msgstr "输出"
projects / vlc / blobdiff