```
-
-**[TODO: Instructions for [AmiTCP based stack]()]**
-
-
----
-
+- **[Instructions for [AmiTCP](https://aminet.net/package/comm/net/AmiTCP-bin-30b2)**]
+ - Copy devicefiles:
+ ```
+ copy pistorm:a314/a314.device DEVS:
+ copy pistorm:a314/a314eth.device DEVS:
+ ```
+ Start Install AmiTCP-3.0b2:
+ - Intermediate User -> Proceed With Install
+ - Install for Real, Log None -> Proceed
+ - Select directory where to install: Work:AmiTCP-3.0b2 -> Proceed
+ - Confirm the copy -> Skip This Part (do 4 times)
+ - Do you want to install example Sana-II configuration files? -> Yes
+ - Select Sana-II configuration files to be copied: -> Proceed with Copy
+ - Do you want to install Napsaterm fonts -> Yes
+ - Select directory where to install Napsaterm fonts: fonts: -> Proceed
+ - Logging in as 'root'... -> Proceed
+ - Give empty password and close login window
+ - Enter default user name: user -> Proceed
+ - Enter the host name of your computer: amiga -> Proceed
+ - Enter domain part of your host name: local -> Proceed
+ - The host name "amiga.local" will be stored... -> Store to ENV(ARC):
+ - Give aliases... (leave empty) -> Proceed
+ - Select a SANA-II device driver: -> Parent Drawer -> a314eth.device -> Proceed
+ - Select unit number: 0 -> Proceed
+ - IP address: 192.168.2.2 -> Proceed
+ - Give destination address... (leave empty) -> Proceed
+ - Netmask of network on interface: 255.255.255.0 -> Proceed
+ - Is this correct? -> Yes
+ - Select a SANA-II device driver: (leave empty) -> Proceed
+ - Enter the IP address of the default gateway: 192.168.2.1 -> Proceed
+ - Give domain names: (leave default) -> Proceed
+ - Give domain names: (leave empty) -> Proceed
+ - Give the IP addresses of the name servers: 1.1.1.1 -> Proceed
+ - Give the IP addresses of the name servers: 1.0.0.1 -> Proceed
+ - Give the IP addresses of the name servers: (leave empty) -> Proceed
+ - Do you want the AmiTCP/IP to be started at the system startup? -> Yes
+ - Do you want Installer to make the rquired chages to yout s:user-startup script? -> Yes
+ - Do you want the Inetd to be started at the AmiTCP/IP startup -> Yes
+ - Quit readme with q-key.
+ - Installation complete! -> Proceed
+
+ `ed s:user-startup`
+ - Remove login-line (ESC,D,enter)
+ - To suppress CLI-window at startup, modify `run AmiTCP:bin/startnet` line to `run >NIL: AmiTCP:bin/startnet`
+ - Save and exit (ESC,x,enter)
+
+ `ed Work:AmiTCP-3.0b2/db/interfaces`
+ - Add line: `eth dev=devs:a314eth.device`
+ - Save and exit (ESC,x,enter)
+
+ `ed Work:AmiTCP-3.0b2/bin/startnet`
+ - modify ifconfig-lines:
+ ```
+ AmiTCP:bin/ifconfig lo0 localhost
+ AmiTCP:bin/ifconfig eth0 192.168.2.2 netmask 255.255.255.0
+ ```
+ - Make sure that startnet executable bit is set:
+ ```
+ protect Work:AmiTCP-3.0b2/bin/startnet +s
+ ```
+ - Congratulations, you have set the a314 networking on your pistorm. Check if everything worked on your Amiga Shell:
+ ```
+ ping www.google.com
+ ```
+
### PiAudio, RemoteWB, VideoPlayer are **not supported, and it's unlikely it will ever be as the PiStorm doesn't have full access to the Chip RAM bus.**
----
\ No newline at end of file
+---