#include "audio_mixer.h"
#include <assert.h>
-#include <endian.h>
#include <bmusb/bmusb.h>
-#include <stdio.h>
#include <endian.h>
-#include <cmath>
-#include <limits>
-#ifdef __SSE__
+#include <math.h>
+#ifdef __SSE2__
#include <immintrin.h>
#endif
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <algorithm>
+#include <chrono>
+#include <cmath>
+#include <cstddef>
+#include <limits>
+#include <utility>
#include "db.h"
#include "flags.h"
-#include "mixer.h"
#include "state.pb.h"
#include "timebase.h"
using namespace bmusb;
using namespace std;
+using namespace std::chrono;
using namespace std::placeholders;
namespace {
limiter(OUTPUT_FREQUENCY),
correlation(OUTPUT_FREQUENCY)
{
- global_audio_mixer = this;
-
for (unsigned bus_index = 0; bus_index < MAX_BUSES; ++bus_index) {
locut[bus_index].init(FILTER_HPF, 2);
eq[bus_index][EQ_BAND_BASS].init(FILTER_LOW_SHELF, 1);
}
set_limiter_enabled(global_flags.limiter_enabled);
set_final_makeup_gain_auto(global_flags.final_makeup_gain_auto);
+
+ r128.init(2, OUTPUT_FREQUENCY);
+ r128.integr_start();
+
+ // hlen=16 is pretty low quality, but we use quite a bit of CPU otherwise,
+ // and there's a limit to how important the peak meter is.
+ peak_resampler.setup(OUTPUT_FREQUENCY, OUTPUT_FREQUENCY * 4, /*num_channels=*/2, /*hlen=*/16, /*frel=*/1.0);
+
+ global_audio_mixer = this;
alsa_pool.init();
if (!global_flags.input_mapping_filename.empty()) {
+ // Must happen after ALSAPool is initialized, as it needs to know the card list.
current_mapping_mode = MappingMode::MULTICHANNEL;
InputMapping new_input_mapping;
if (!load_input_mapping_from_file(get_devices(),
current_mapping_mode = MappingMode::MULTICHANNEL;
}
}
-
- r128.init(2, OUTPUT_FREQUENCY);
- r128.integr_start();
-
- // hlen=16 is pretty low quality, but we use quite a bit of CPU otherwise,
- // and there's a limit to how important the peak meter is.
- peak_resampler.setup(OUTPUT_FREQUENCY, OUTPUT_FREQUENCY * 4, /*num_channels=*/2, /*hlen=*/16, /*frel=*/1.0);
}
void AudioMixer::reset_resampler(DeviceSpec device_spec)
} else {
// TODO: ResamplingQueue should probably take the full device spec.
// (It's only used for console output, though.)
- device->resampling_queue.reset(new ResamplingQueue(device_spec.index, device->capture_frequency, OUTPUT_FREQUENCY, device->interesting_channels.size()));
+ device->resampling_queue.reset(new ResamplingQueue(
+ device_spec.index, device->capture_frequency, OUTPUT_FREQUENCY, device->interesting_channels.size(),
+ global_flags.audio_queue_length_ms * 0.001));
}
- device->next_local_pts = 0;
}
-bool AudioMixer::add_audio(DeviceSpec device_spec, const uint8_t *data, unsigned num_samples, AudioFormat audio_format, int64_t frame_length)
+bool AudioMixer::add_audio(DeviceSpec device_spec, const uint8_t *data, unsigned num_samples, AudioFormat audio_format, int64_t frame_length, steady_clock::time_point frame_time)
{
AudioDevice *device = find_audio_device(device_spec);
}
// Now add it.
- int64_t local_pts = device->next_local_pts;
- device->resampling_queue->add_input_samples(local_pts / double(TIMEBASE), audio.get(), num_samples);
- device->next_local_pts = local_pts + frame_length;
+ device->resampling_queue->add_input_samples(frame_time, audio.get(), num_samples, ResamplingQueue::ADJUST_RATE);
return true;
}
vector<float> silence(samples_per_frame * num_channels, 0.0f);
for (unsigned i = 0; i < num_frames; ++i) {
- device->resampling_queue->add_input_samples(device->next_local_pts / double(TIMEBASE), silence.data(), samples_per_frame);
- // Note that if the format changed in the meantime, we have
- // no way of detecting that; we just have to assume the frame length
- // is always the same.
- device->next_local_pts += frame_length;
+ device->resampling_queue->add_input_samples(steady_clock::now(), silence.data(), samples_per_frame, ResamplingQueue::DO_NOT_ADJUST_RATE);
}
return true;
}
{
BusSettings settings;
settings.fader_volume_db = 0.0f;
+ settings.muted = false;
settings.locut_enabled = global_flags.locut_enabled;
for (unsigned band_index = 0; band_index < NUM_EQ_BANDS; ++band_index) {
settings.eq_level_db[band_index] = 0.0f;
lock_guard<timed_mutex> lock(audio_mutex);
BusSettings settings;
settings.fader_volume_db = fader_volume_db[bus_index];
+ settings.muted = mute[bus_index];
settings.locut_enabled = locut_enabled[bus_index];
for (unsigned band_index = 0; band_index < NUM_EQ_BANDS; ++band_index) {
settings.eq_level_db[band_index] = eq_level_db[bus_index][band_index];
{
lock_guard<timed_mutex> lock(audio_mutex);
fader_volume_db[bus_index] = settings.fader_volume_db;
+ mute[bus_index] = settings.muted;
locut_enabled[bus_index] = settings.locut_enabled;
for (unsigned band_index = 0; band_index < NUM_EQ_BANDS; ++band_index) {
eq_level_db[bus_index][band_index] = settings.eq_level_db[band_index];
void AudioMixer::fill_audio_bus(const map<DeviceSpec, vector<float>> &samples_card, const InputMapping::Bus &bus, unsigned num_samples, float *output)
{
if (bus.device.type == InputSourceType::SILENCE) {
- memset(output, 0, num_samples * sizeof(*output));
+ memset(output, 0, num_samples * 2 * sizeof(*output));
} else {
assert(bus.device.type == InputSourceType::CAPTURE_CARD ||
bus.device.type == InputSourceType::ALSA_INPUT);
} // namespace
-vector<float> AudioMixer::get_output(double pts, unsigned num_samples, ResamplingQueue::RateAdjustmentPolicy rate_adjustment_policy)
+vector<float> AudioMixer::get_output(steady_clock::time_point ts, unsigned num_samples, ResamplingQueue::RateAdjustmentPolicy rate_adjustment_policy)
{
map<DeviceSpec, vector<float>> samples_card;
vector<float> samples_bus;
memset(&samples_card[device_spec][0], 0, samples_card[device_spec].size() * sizeof(float));
} else {
device->resampling_queue->get_output_samples(
- pts,
+ ts,
&samples_card[device_spec][0],
num_samples,
rate_adjustment_policy);
// (half-time of 30 seconds).
double target_loudness_factor, alpha;
double loudness_lu = r128.loudness_M() - ref_level_lufs;
- double current_makeup_lu = to_db(final_makeup_gain);
target_loudness_factor = final_makeup_gain * from_db(-loudness_lu);
- // If we're outside +/- 5 LU uncorrected, we don't count it as
+ // If we're outside +/- 5 LU (after correction), we don't count it as
// a normal signal (probably silence) and don't change the
// correction factor; just apply what we already have.
- if (fabs(loudness_lu - current_makeup_lu) >= 5.0 || !final_makeup_gain_auto) {
+ if (fabs(loudness_lu) >= 5.0 || !final_makeup_gain_auto) {
alpha = 0.0;
} else {
// Formula adapted from
assert(samples_bus.size() == samples_out->size());
assert(samples_bus.size() % 2 == 0);
unsigned num_samples = samples_bus.size() / 2;
- if (fabs(fader_volume_db[bus_index] - last_fader_volume_db[bus_index]) > 1e-3) {
+ const float new_volume_db = mute[bus_index] ? -90.0f : fader_volume_db[bus_index].load();
+ if (fabs(new_volume_db - last_fader_volume_db[bus_index]) > 1e-3) {
// The volume has changed; do a fade over the course of this frame.
// (We might have some numerical issues here, but it seems to sound OK.)
// For the purpose of fading here, the silence floor is set to -90 dB
// (the fader only goes to -84).
float old_volume = from_db(max<float>(last_fader_volume_db[bus_index], -90.0f));
- float volume = from_db(max<float>(fader_volume_db[bus_index], -90.0f));
+ float volume = from_db(max<float>(new_volume_db, -90.0f));
float volume_inc = pow(volume / old_volume, 1.0 / num_samples);
volume = old_volume;
volume *= volume_inc;
}
}
- } else {
- float volume = from_db(fader_volume_db[bus_index]);
+ } else if (new_volume_db > -90.0f) {
+ float volume = from_db(new_volume_db);
if (bus_index == 0) {
for (unsigned i = 0; i < num_samples; ++i) {
(*samples_out)[i * 2 + 0] = samples_bus[i * 2 + 0] * volume;
}
}
- last_fader_volume_db[bus_index] = fader_volume_db[bus_index];
+ last_fader_volume_db[bus_index] = new_volume_db;
}
void AudioMixer::measure_bus_levels(unsigned bus_index, const vector<float> &left, const vector<float> &right)
{
assert(left.size() == right.size());
- const float volume = from_db(fader_volume_db[bus_index]);
+ const float volume = mute[bus_index] ? 0.0f : from_db(fader_volume_db[bus_index]);
const float peak_levels[2] = {
find_peak(left.data(), left.size()) * volume,
find_peak(right.data(), right.size()) * volume