using namespace std;
using namespace std::placeholders;
-#define WIDTH 1280
-#define HEIGHT 750 /* 30 lines ancillary data? */
-//#define WIDTH 1920
-//#define HEIGHT 1125 /* ??? lines ancillary data? */
+#define MIN_WIDTH 640
#define HEADER_SIZE 44
//#define HEADER_SIZE 0
#define AUDIO_HEADER_SIZE 4
-//#define FRAME_SIZE (WIDTH * HEIGHT * 2 + HEADER_SIZE) // UYVY
-//#define FRAME_SIZE (WIDTH * HEIGHT * 2 * 4 / 3 + HEADER_SIZE) // v210
-#define FRAME_SIZE (8 << 20)
+#define FRAME_SIZE (8 << 20) // 8 MB.
+#define USB_VIDEO_TRANSFER_SIZE (128 << 10) // 128 kB.
+
+namespace {
FILE *audiofp;
thread usb_thread;
atomic<bool> should_quit;
+int find_xfer_size_for_width(int width)
+{
+ // Video seems to require isochronous packets scaled with the width;
+ // seemingly six lines is about right, rounded up to the required 1kB
+ // multiple.
+ int size = width * 2 * 6;
+ // Note that for 10-bit input, you'll need to increase size accordingly.
+ //size = size * 4 / 3;
+ if (size % 1024 != 0) {
+ size &= ~1023;
+ size += 1024;
+ }
+ return size;
+}
+
+void change_xfer_size_for_width(int width, libusb_transfer *xfr)
+{
+ assert(width >= MIN_WIDTH);
+ size_t size = find_xfer_size_for_width(width);
+ int num_iso_pack = xfr->length / size;
+ if (num_iso_pack != xfr->num_iso_packets ||
+ size != xfr->iso_packet_desc[0].length) {
+ xfr->num_iso_packets = num_iso_pack;
+ libusb_set_iso_packet_lengths(xfr, size);
+ }
+}
+
+} // namespace
+
FrameAllocator::~FrameAllocator() {}
// Audio is more important than video, and also much cheaper.
void BMUSBCapture::queue_frame(uint16_t format, uint16_t timecode, FrameAllocator::Frame frame, deque<QueuedFrame> *q)
{
+ unique_lock<mutex> lock(queue_lock);
if (!q->empty() && !uint16_less_than_with_wraparound(q->back().timecode, timecode)) {
printf("Blocks going backwards: prev=0x%04x, cur=0x%04x (dropped)\n",
q->back().timecode, timecode);
qf.format = format;
qf.timecode = timecode;
qf.frame = frame;
-
- {
- unique_lock<mutex> lock(queue_lock);
- q->push_back(move(qf));
- }
+ q->push_back(move(qf));
queues_not_empty.notify_one(); // might be spurious
}
unique_lock<mutex> lock(queue_lock);
queues_not_empty.wait(lock, [this]{ return dequeue_thread_should_quit || (!pending_video_frames.empty() && !pending_audio_frames.empty()); });
+ if (dequeue_thread_should_quit) break;
+
uint16_t video_timecode = pending_video_frames.front().timecode;
uint16_t audio_timecode = pending_audio_frames.front().timecode;
if (uint16_less_than_with_wraparound(video_timecode, audio_timecode)) {
printf("Video block 0x%04x without corresponding audio block, dropping.\n",
video_timecode);
- video_frame_allocator->release_frame(pending_video_frames.front().frame);
+ QueuedFrame video_frame = pending_video_frames.front();
pending_video_frames.pop_front();
+ lock.unlock();
+ video_frame_allocator->release_frame(video_frame.frame);
} else if (uint16_less_than_with_wraparound(audio_timecode, video_timecode)) {
printf("Audio block 0x%04x without corresponding video block, sending blank frame.\n",
audio_timecode);
}
//dump_frame();
queue_frame(format, timecode, current_video_frame, &pending_video_frames);
+
+ // Update the assumed frame width. We might be one frame too late on format changes,
+ // but it's much better than asking the user to choose manually.
+ unsigned width, height, second_field_start, extra_lines_top, extra_lines_bottom, frame_rate_nom, frame_rate_den;
+ bool interlaced;
+ if (decode_video_format(format, &width, &height, &second_field_start, &extra_lines_top, &extra_lines_bottom,
+ &frame_rate_nom, &frame_rate_den, &interlaced)) {
+ assumed_frame_width = width;
+ }
}
//printf("Found frame start, format 0x%04x timecode 0x%04x, previous frame length was %d/%d\n",
// format, timecode,
decode_packs(xfr, "DeckLinkAudioResyncT", 20, &usb->current_audio_frame, "audio", bind(&BMUSBCapture::start_new_audio_block, usb, _1));
} else {
decode_packs(xfr, "\x00\x00\xff\xff", 4, &usb->current_video_frame, "video", bind(&BMUSBCapture::start_new_frame, usb, _1));
+
+ // Update the transfer with the new assumed width, if we're in the process of changing formats.
+ change_xfer_size_for_width(usb->assumed_frame_width, xfr);
}
}
if (xfr->type == LIBUSB_TRANSFER_TYPE_CONTROL) {
}
#endif
- if (libusb_submit_transfer(xfr) < 0) {
- fprintf(stderr, "error re-submitting URB\n");
+ int rc = libusb_submit_transfer(xfr);
+ if (rc < 0) {
+ fprintf(stderr, "error re-submitting URB: %s\n", libusb_error_name(rc));
exit(1);
}
}
}
}
+struct USBCardDevice {
+ uint16_t product;
+ uint8_t bus, port;
+ libusb_device *device;
+};
+
+libusb_device_handle *open_card(int card_index)
+{
+ libusb_device **devices;
+ ssize_t num_devices = libusb_get_device_list(nullptr, &devices);
+ if (num_devices == -1) {
+ fprintf(stderr, "Error finding USB devices\n");
+ exit(1);
+ }
+ vector<USBCardDevice> found_cards;
+ for (ssize_t i = 0; i < num_devices; ++i) {
+ libusb_device_descriptor desc;
+ if (libusb_get_device_descriptor(devices[i], &desc) < 0) {
+ fprintf(stderr, "Error getting device descriptor for device %d\n", int(i));
+ exit(1);
+ }
+
+ uint8_t bus = libusb_get_bus_number(devices[i]);
+ uint8_t port = libusb_get_port_number(devices[i]);
+
+ if (!(desc.idVendor == 0x1edb && desc.idProduct == 0xbd3b) &&
+ !(desc.idVendor == 0x1edb && desc.idProduct == 0xbd4f)) {
+ libusb_unref_device(devices[i]);
+ continue;
+ }
+
+ found_cards.push_back({ desc.idProduct, bus, port, devices[i] });
+ }
+ libusb_free_device_list(devices, 0);
+
+ // Sort the devices to get a consistent ordering.
+ sort(found_cards.begin(), found_cards.end(), [](const USBCardDevice &a, const USBCardDevice &b) {
+ if (a.product != b.product)
+ return a.product < b.product;
+ if (a.bus != b.bus)
+ return a.bus < b.bus;
+ return a.port < b.port;
+ });
+
+ for (size_t i = 0; i < found_cards.size(); ++i) {
+ fprintf(stderr, "Card %d: Bus %03u Device %03u ", int(i), found_cards[i].bus, found_cards[i].port);
+ if (found_cards[i].product == 0xbd3b) {
+ fprintf(stderr, "Intensity Shuttle\n");
+ } else if (found_cards[i].product == 0xbd4f) {
+ fprintf(stderr, "UltraStudio SDI\n");
+ } else {
+ assert(false);
+ }
+ }
+
+ if (size_t(card_index) >= found_cards.size()) {
+ fprintf(stderr, "Could not open card %d (only %d found)\n", card_index, int(found_cards.size()));
+ exit(1);
+ }
+
+ libusb_device_handle *devh;
+ int rc = libusb_open(found_cards[card_index].device, &devh);
+ if (rc < 0) {
+ fprintf(stderr, "Error opening card %d: %s\n", card_index, libusb_error_name(rc));
+ exit(1);
+ }
+
+ for (size_t i = 0; i < found_cards.size(); ++i) {
+ libusb_unref_device(found_cards[i].device);
+ }
+
+ return devh;
+}
+
void BMUSBCapture::configure_card()
{
if (video_frame_allocator == nullptr) {
exit(1);
}
- //struct libusb_device_handle *devh = libusb_open_device_with_vid_pid(nullptr, 0x1edb, 0xbd3b);
- //struct libusb_device_handle *devh = libusb_open_device_with_vid_pid(nullptr, 0x1edb, 0xbd4f);
- struct libusb_device_handle *devh = libusb_open_device_with_vid_pid(nullptr, vid, pid);
+ libusb_device_handle *devh = open_card(card_index);
if (!devh) {
fprintf(stderr, "Error finding USB device\n");
exit(1);
fprintf(stderr, "Error getting configuration: %s\n", libusb_error_name(rc));
exit(1);
}
+
+#if 0
printf("%d interface\n", config->bNumInterfaces);
for (int interface_number = 0; interface_number < config->bNumInterfaces; ++interface_number) {
printf(" interface %d\n", interface_number);
}
}
}
+#endif
rc = libusb_set_configuration(devh, /*configuration=*/1);
if (rc < 0) {
}
rc = libusb_set_interface_alt_setting(devh, /*interface=*/0, /*alternate_setting=*/2);
if (rc < 0) {
- fprintf(stderr, "Error setting alternate 1: %s\n", libusb_error_name(rc));
+ fprintf(stderr, "Error setting alternate 2: %s\n", libusb_error_name(rc));
exit(1);
}
#if 0
fprintf(stderr, "Error on control %d: %s\n", ctrls[req].index, libusb_error_name(rc));
exit(1);
}
-
+
+ if (ctrls[req].index == 16 && rc == 4) {
+ printf("Card firmware version: 0x%02x%02x\n", value[2], value[3]);
+ }
+
+#if 0
printf("rc=%d: ep=%d@%d %d -> 0x", rc, ctrls[req].endpoint, ctrls[req].request, ctrls[req].index);
for (int i = 0; i < rc; ++i) {
printf("%02x", value[i]);
}
printf("\n");
+#endif
}
#if 0
// set up isochronous transfers for audio and video
for (int e = 3; e <= 4; ++e) {
//int num_transfers = (e == 3) ? 6 : 6;
- int num_transfers = 6;
+ int num_transfers = 10;
for (int i = 0; i < num_transfers; ++i) {
+ size_t buf_size;
int num_iso_pack, size;
if (e == 3) {
- // Video seems to require isochronous packets scaled with the width;
- // seemingly six lines is about right, rounded up to the required 1kB
- // multiple.
- size = WIDTH * 2 * 6;
- // Note that for 10-bit input, you'll need to increase size accordingly.
- //size = size * 4 / 3;
- if (size % 1024 != 0) {
- size &= ~1023;
- size += 1024;
- }
- num_iso_pack = (2 << 18) / size; // 512 kB.
- printf("Picking %d packets of 0x%x bytes each\n", num_iso_pack, size);
+ // Allocate for minimum width (because that will give us the most
+ // number of packets, so we don't need to reallocated, but we'll
+ // default to 720p for the first frame.
+ size = find_xfer_size_for_width(MIN_WIDTH);
+ num_iso_pack = USB_VIDEO_TRANSFER_SIZE / size;
+ buf_size = USB_VIDEO_TRANSFER_SIZE;
} else {
size = 0xc0;
num_iso_pack = 80;
+ buf_size = num_iso_pack * size;
}
- int num_bytes = num_iso_pack * size;
- uint8_t *buf = new uint8_t[num_bytes];
+ assert(size_t(num_iso_pack * size) <= buf_size);
+ uint8_t *buf = new uint8_t[buf_size];
xfr = libusb_alloc_transfer(num_iso_pack);
if (!xfr) {
}
int ep = LIBUSB_ENDPOINT_IN | e;
- libusb_fill_iso_transfer(xfr, devh, ep, buf, num_bytes,
+ libusb_fill_iso_transfer(xfr, devh, ep, buf, buf_size,
num_iso_pack, cb_xfr, nullptr, 0);
libusb_set_iso_packet_lengths(xfr, size);
xfr->user_data = this;
+
+ if (e == 3) {
+ change_xfer_size_for_width(assumed_frame_width, xfr);
+ }
+
iso_xfrs.push_back(xfr);
}
}
void BMUSBCapture::start_bm_capture()
{
- printf("starting capture\n");
int i = 0;
for (libusb_transfer *xfr : iso_xfrs) {
- printf("submitting transfer...\n");
int rc = libusb_submit_transfer(xfr);
++i;
if (rc < 0) {
should_quit = true;
usb_thread.join();
}
+
+struct VideoFormatEntry {
+ uint16_t normalized_video_format;
+ unsigned width, height, second_field_start;
+ unsigned extra_lines_top, extra_lines_bottom;
+ unsigned frame_rate_nom, frame_rate_den;
+ bool interlaced;
+};
+
+bool decode_video_format(uint16_t video_format, unsigned *width, unsigned *height, unsigned *second_field_start,
+ unsigned *extra_lines_top, unsigned *extra_lines_bottom,
+ unsigned *frame_rate_nom, unsigned *frame_rate_den, bool *interlaced)
+{
+ *interlaced = false;
+
+ // TODO: Add these for all formats as we find them.
+ *extra_lines_top = *extra_lines_bottom = *second_field_start = 0;
+
+ if (video_format == 0x0800) {
+ // No video signal. These green pseudo-frames seem to come at about 30.13 Hz.
+ // It's a strange thing, but what can you do.
+ *width = 720;
+ *height = 525;
+ *extra_lines_top = 0;
+ *extra_lines_bottom = 0;
+ *frame_rate_nom = 3013;
+ *frame_rate_den = 100;
+ return true;
+ }
+ if ((video_format & 0xe800) != 0xe800) {
+ printf("Video format 0x%04x does not appear to be a video format. Assuming 60 Hz.\n",
+ video_format);
+ *width = 0;
+ *height = 0;
+ *extra_lines_top = 0;
+ *extra_lines_bottom = 0;
+ *frame_rate_nom = 60;
+ *frame_rate_den = 1;
+ return false;
+ }
+
+ // NTSC (480i59.94, I suppose). A special case, see below.
+ if (video_format == 0xe901 || video_format == 0xe9c1 || video_format == 0xe801) {
+ *width = 720;
+ *height = 480;
+ *extra_lines_top = 17;
+ *extra_lines_bottom = 28;
+ *frame_rate_nom = 30000;
+ *frame_rate_den = 1001;
+ *second_field_start = 280;
+ *interlaced = true;
+ return true;
+ }
+
+ // PAL (576i50, I suppose). A special case, see below.
+ if (video_format == 0xe909 || video_format == 0xe9c9 || video_format == 0xe809 || video_format == 0xebe9) {
+ *width = 720;
+ *height = 576;
+ *extra_lines_top = 22;
+ *extra_lines_bottom = 27;
+ *frame_rate_nom = 25;
+ *frame_rate_den = 1;
+ *second_field_start = 335;
+ *interlaced = true;
+ return true;
+ }
+
+ // 0x8 seems to be a flag about availability of deep color on the input,
+ // except when it's not (e.g. it's the only difference between NTSC
+ // and PAL). Rather confusing. But we clear it here nevertheless, because
+ // usually it doesn't mean anything.
+ uint16_t normalized_video_format = video_format & ~0xe808;
+ constexpr VideoFormatEntry entries[] = {
+ { 0x0143, 1280, 720, 0, 25, 5, 50, 1, false }, // 720p50.
+ { 0x0103, 1280, 720, 0, 25, 5, 60, 1, false }, // 720p60.
+ { 0x0121, 1280, 720, 0, 25, 5, 60000, 1001, false }, // 720p59.94.
+ { 0x01c3, 1920, 1080, 0, 0, 0, 30, 1, false }, // 1080p30.
+ { 0x0003, 1920, 1080, 582, 20, 25, 30, 1, true }, // 1080i60.
+ { 0x01e1, 1920, 1080, 0, 0, 0, 30000, 1001, false }, // 1080p29.97.
+ { 0x0021, 1920, 1080, 582, 20, 25, 30000, 1001, true }, // 1080i59.94.
+ { 0x0063, 1920, 1080, 0, 0, 0, 25, 1, false }, // 1080p25.
+ { 0x0043, 1920, 1080, 0, 0, 0, 25, 1, true }, // 1080p50.
+ { 0x008e, 1920, 1080, 0, 0, 0, 24, 1, false }, // 1080p24.
+ { 0x00a1, 1920, 1080, 0, 0, 0, 24000, 1001, false }, // 1080p23.98.
+ };
+ for (const VideoFormatEntry &entry : entries) {
+ if (normalized_video_format == entry.normalized_video_format) {
+ *width = entry.width;
+ *height = entry.height;
+ *second_field_start = entry.second_field_start;
+ *extra_lines_top = entry.extra_lines_top;
+ *extra_lines_bottom = entry.extra_lines_bottom;
+ *frame_rate_nom = entry.frame_rate_nom;
+ *frame_rate_den = entry.frame_rate_den;
+ *interlaced = entry.interlaced;
+ return true;
+ }
+ }
+
+ printf("Unknown video format 0x%04x. Assuming 720p60.\n", video_format);
+ *width = 1280;
+ *height = 720;
+ *frame_rate_nom = 60;
+ *frame_rate_den = 1;
+ return false;
+}