]> git.sesse.net Git - ffmpeg/blobdiff - configure
h264: Remove unused variables.
[ffmpeg] / configure
index 62f9bf254479b18134a8755a27ef96d6abd64d07..891b06c43370ffadcaff3b78029c0fd1ebb84c15 100755 (executable)
--- a/configure
+++ b/configure
@@ -83,6 +83,10 @@ Configuration options:
   --disable-ffmpeg         disable ffmpeg build
   --disable-ffplay         disable ffplay build
   --disable-ffserver       disable ffserver build
+  --disable-avdevice       disable libavdevice build
+  --disable-avcodec        disable libavcodec build
+  --disable-avformat       disable libavformat build
+  --disable-swscale        disable libswscale build
   --enable-postproc        enable GPLed postprocessing support [no]
   --enable-avfilter        video filter support [no]
   --enable-avfilter-lavf   video filters dependent on avformat [no]
@@ -92,13 +96,13 @@ Configuration options:
   --enable-w32threads      use Win32 threads [no]
   --enable-x11grab         enable X11 grabbing [no]
   --disable-network        disable network support [no]
-  --disable-ipv6           disable IPv6 support [no]
   --disable-mpegaudio-hp   faster (but less accurate) MPEG audio decoding [no]
   --enable-gray            enable full grayscale support (slower color)
   --disable-swscale-alpha  disable alpha channel support in swscale
   --disable-fastdiv        disable table-based division
   --enable-small           optimize for size instead of speed
   --disable-aandct         disable AAN DCT code
+  --disable-dct            disable DCT code
   --disable-fft            disable FFT code
   --disable-golomb         disable Golomb code
   --disable-lpc            disable LPC code
@@ -106,6 +110,7 @@ Configuration options:
   --disable-rdft           disable RDFT code
   --disable-vaapi          disable VAAPI code
   --disable-vdpau          disable VDPAU code
+  --disable-dxva2          disable DXVA2 code
   --enable-runtime-cpudetect detect cpu capabilities at runtime (bigger binary)
   --enable-hardcoded-tables use hardcoded tables instead of runtime generation
   --enable-memalign-hack   emulate memalign, interferes with memory debuggers
@@ -208,6 +213,7 @@ Advanced options (experts only):
                            instruction selection, may crash on older CPUs)
   --enable-powerpc-perf    enable performance report on PPC
                            (requires enabling PMC)
+  --disable-asm            disable all assembler optimizations
   --disable-altivec        disable AltiVec optimizations
   --disable-amd3dnow       disable 3DNow! optimizations
   --disable-amd3dnowext    disable 3DNow! extended optimizations
@@ -225,6 +231,8 @@ Advanced options (experts only):
   --disable-vis            disable VIS optimizations
   --disable-yasm           disable use of yasm assembler
   --enable-pic             build position-independent code
+  --malloc-prefix=PFX      prefix malloc and related names with PFX
+  --enable-sram            allow use of on-chip SRAM
 
 Developer options (useful when working on FFmpeg itself):
   --disable-debug          disable debugging symbols
@@ -583,11 +591,11 @@ check_as(){
 check_asm(){
     log check_asm "$@"
     name="$1"
-    asm="$2"
+    code="$2"
     shift 2
     disable $name
     check_as "$@" <<EOF && enable $name
-void foo(void){ __asm__ volatile($asm); }
+void foo(void){ __asm__ volatile($code); }
 EOF
 }
 
@@ -660,6 +668,18 @@ int main(void){ $func(); }
 EOF
 }
 
+check_mathfunc(){
+    log check_mathfunc "$@"
+    func=$1
+    shift
+    disable $func
+    check_ld "$@" <<EOF && enable $func
+#include <math.h>
+float foo(float f) { return $func(f); }
+int main(void){ return 0; }
+EOF
+}
+
 check_func_headers(){
     log check_func_headers "$@"
     headers=$1
@@ -830,6 +850,12 @@ apply(){
     "$@" < "$file" > "$file.tmp" && mv "$file.tmp" "$file" || rm "$file.tmp"
 }
 
+cp_if_changed(){
+    cmp -s "$1" "$2" &&
+        echo "$2 is unchanged" ||
+        cp -f "$1" "$2"
+}
+
 # CONFIG_LIST contains configurable options, while HAVE_LIST is for
 # system-dependent things.
 
@@ -850,12 +876,17 @@ COMPONENT_LIST="
 CONFIG_LIST="
     $COMPONENT_LIST
     aandct
+    avcodec
+    avdevice
     avfilter
     avfilter_lavf
+    avformat
     avisynth
     beos_netserver
     bzlib
+    dct
     doc
+    dxva2
     fastdiv
     ffmpeg
     ffplay
@@ -866,7 +897,6 @@ CONFIG_LIST="
     gprof
     gray
     hardcoded_tables
-    ipv6
     libdc1394
     libdirac
     libfaac
@@ -898,7 +928,9 @@ CONFIG_LIST="
     runtime_cpudetect
     shared
     small
+    sram
     static
+    swscale
     swscale_alpha
     vaapi
     vdpau
@@ -932,6 +964,7 @@ ARCH_LIST='
     sh4
     sparc
     sparc64
+    tomi
     x86
     x86_32
     x86_64
@@ -956,14 +989,19 @@ ARCH_EXT_LIST='
     vis
 '
 
+HAVE_LIST_PUB='
+    bigendian
+'
+
 HAVE_LIST="
     $ARCH_EXT_LIST
+    $HAVE_LIST_PUB
     $THREADS_LIST
     alsa_asoundlib_h
     altivec_h
     arpa_inet_h
+    attribute_may_alias
     attribute_packed
-    bigendian
     bswap
     closesocket
     cmov
@@ -1018,7 +1056,11 @@ HAVE_LIST="
     socklen_t
     soundcard_h
     poll_h
+    setrlimit
     struct_addrinfo
+    struct_ipv6_mreq
+    struct_sockaddr_in6
+    struct_sockaddr_sa_len
     struct_sockaddr_storage
     sys_mman_h
     sys_resource_h
@@ -1038,6 +1080,7 @@ HAVE_LIST="
 
 # options emitted with CONFIG_ prefix but not available on command line
 CONFIG_EXTRA="
+    avutil
     gplv3
     lgplv3
 "
@@ -1046,6 +1089,7 @@ CMDLINE_SELECT="
     $ARCH_EXT_LIST
     $CONFIG_LIST
     $THREADS_LIST
+    asm
     cross_compile
     debug
     extra_warnings
@@ -1082,6 +1126,7 @@ CMDLINE_SET="
     host_os
     ld
     logfile
+    malloc_prefix
     nm
     source_path
     sysinclude
@@ -1113,7 +1158,7 @@ ppc4xx_deps="ppc"
 
 vis_deps="sparc"
 
-x86_64_select="cmov fast_cmov"
+x86_64_suggest="cmov fast_cmov"
 amd3dnow_deps="mmx"
 amd3dnowext_deps="amd3dnow"
 mmx_deps="x86"
@@ -1128,16 +1173,23 @@ fast_unaligned_if_any="armv6 ppc x86"
 need_memalign="altivec neon sse"
 inline_asm_deps="!tms470"
 
+# subsystems
+mdct_select="fft"
+rdft_select="fft"
+
 # decoders / encoders / hardware accelerators
-aac_decoder_select="fft mdct aac_parser"
-aac_encoder_select="fft mdct"
-ac3_decoder_select="fft mdct ac3_parser"
+aac_decoder_select="mdct aac_parser"
+aac_encoder_select="mdct"
+ac3_decoder_select="mdct ac3_parser"
 alac_encoder_select="lpc"
-atrac3_decoder_select="fft mdct"
+atrac1_decoder_select="mdct"
+atrac3_decoder_select="mdct"
+binkaudio_dct_decoder_select="mdct rdft dct"
+binkaudio_rdft_decoder_select="mdct rdft"
 cavs_decoder_select="golomb"
-cook_decoder_select="fft mdct"
+cook_decoder_select="mdct"
 cscd_decoder_suggest="zlib"
-dca_decoder_select="fft mdct"
+dca_decoder_select="mdct"
 dnxhd_encoder_select="aandct"
 dxa_decoder_select="zlib"
 eac3_decoder_select="ac3_decoder"
@@ -1159,6 +1211,8 @@ h263_vaapi_hwaccel_select="vaapi h263_decoder"
 h263i_decoder_select="h263_decoder"
 h263p_encoder_select="h263_encoder"
 h264_decoder_select="golomb"
+h264_dxva2_hwaccel_deps="dxva2api_h"
+h264_dxva2_hwaccel_select="dxva2 h264_decoder"
 h264_vaapi_hwaccel_deps="va_va_h"
 h264_vaapi_hwaccel_select="vaapi"
 h264_vdpau_decoder_deps="vdpau_vdpau_h vdpau_vdpau_x11_h"
@@ -1192,11 +1246,11 @@ msmpeg4v2_decoder_select="h263_decoder"
 msmpeg4v2_encoder_select="h263_encoder"
 msmpeg4v3_decoder_select="h263_decoder"
 msmpeg4v3_encoder_select="h263_encoder"
-nellymoser_decoder_select="fft mdct"
-nellymoser_encoder_select="fft mdct"
+nellymoser_decoder_select="mdct"
+nellymoser_encoder_select="mdct"
 png_decoder_select="zlib"
 png_encoder_select="zlib"
-qdm2_decoder_select="fft mdct rdft"
+qdm2_decoder_select="mdct rdft"
 rv10_decoder_select="h263_decoder"
 rv10_encoder_select="h263_encoder"
 rv20_decoder_select="h263_decoder"
@@ -1214,24 +1268,29 @@ tiff_decoder_suggest="zlib"
 tiff_encoder_suggest="zlib"
 truehd_decoder_select="mlp_decoder"
 tscc_decoder_select="zlib"
+twinvq_decoder_select="mdct"
 vc1_decoder_select="h263_decoder"
+vc1_dxva2_hwaccel_deps="dxva2api_h DXVA_PictureParameters_wDecodedPictureIndex"
+vc1_dxva2_hwaccel_select="dxva2 vc1_decoder"
 vc1_vaapi_hwaccel_deps="va_va_h"
 vc1_vaapi_hwaccel_select="vaapi vc1_decoder"
 vc1_vdpau_decoder_deps="vdpau_vdpau_h vdpau_vdpau_x11_h"
 vc1_vdpau_decoder_select="vdpau vc1_decoder"
-vorbis_decoder_select="fft mdct"
-vorbis_encoder_select="fft mdct"
+vorbis_decoder_select="mdct"
+vorbis_encoder_select="mdct"
 vp6a_decoder_select="vp6_decoder"
 vp6f_decoder_select="vp6_decoder"
-wmav1_decoder_select="fft mdct"
-wmav1_encoder_select="fft mdct"
-wmav2_decoder_select="fft mdct"
-wmav2_encoder_select="fft mdct"
+wmapro_decoder_select="mdct"
+wmav1_decoder_select="mdct"
+wmav1_encoder_select="mdct"
+wmav2_decoder_select="mdct"
+wmav2_encoder_select="mdct"
 wmv1_decoder_select="h263_decoder"
 wmv1_encoder_select="h263_encoder"
 wmv2_decoder_select="h263_decoder"
 wmv2_encoder_select="h263_encoder"
 wmv3_decoder_select="vc1_decoder"
+wmv3_dxva2_hwaccel_select="vc1_dxva2_hwaccel"
 wmv3_vaapi_hwaccel_select="vc1_vaapi_hwaccel"
 wmv3_vdpau_decoder_select="vc1_vdpau_decoder"
 zlib_decoder_select="zlib"
@@ -1312,7 +1371,7 @@ oss_outdev_deps_any="soundcard_h sys_soundcard_h"
 v4l_indev_deps="linux_videodev_h"
 v4l2_indev_deps_any="linux_videodev2_h sys_videoio_h"
 vfwcap_indev_deps="capCreateCaptureWindow"
-vfwcap_indev_extralibs="-lvfw32"
+vfwcap_indev_extralibs="-lavicap32"
 x11_grab_device_indev_deps="x11grab XShmCreateImage"
 x11_grab_device_indev_extralibs="-lX11 -lXext -lXfixes"
 
@@ -1326,10 +1385,17 @@ udp_protocol_deps="network"
 
 # filters
 movie_filter_deps="avfilter_lavf"
+avfilter_lavf_deps="avformat"
+
+# libraries
+avdevice_deps="avcodec avformat"
+avformat_deps="avcodec"
 
 # programs
-ffplay_deps="sdl"
-ffserver_deps="ffm_muxer rtp_protocol rtsp_demuxer"
+ffmpeg_deps="avcodec avformat swscale"
+ffplay_deps="avcodec avformat swscale sdl"
+ffplay_select="rdft"
+ffserver_deps="avformat ffm_muxer rtp_protocol rtsp_demuxer"
 ffserver_extralibs='$ldl'
 
 doc_deps="texi2html"
@@ -1359,28 +1425,35 @@ ranlib="ranlib"
 strip="strip"
 yasmexe="yasm"
 
+nm_opts='-g'
+
 # machine
-arch=$(uname -m)
+arch_default=$(uname -m)
 cpu="generic"
 
 # OS
-target_os=$(tolower $(uname -s))
-host_os=$target_os
+target_os_default=$(tolower $(uname -s))
+host_os=$target_os_default
 
 # configurable options
+enable avcodec
+enable avdevice
+enable avformat
+enable avutil
+enable asm
 enable debug
 enable doc
 enable fastdiv
 enable ffmpeg
 enable ffplay
 enable ffserver
-enable ipv6
 enable mpegaudio_hp
 enable network
 enable optimizations
 enable protocols
 enable static
 enable stripping
+enable swscale
 enable swscale_alpha
 
 # build settings
@@ -1402,7 +1475,7 @@ CC_O='-o $@'
 host_cflags='-D_ISOC99_SOURCE -D_POSIX_C_SOURCE=200112 -O3 -g -Wall'
 host_libs='-lm'
 
-target_path='.'
+target_path='$(CURDIR)'
 
 # gcc stupidly only outputs the basename of targets with -MM, but we need the
 # full relative path for objects in subdirectories for non-recursive Make.
@@ -1471,7 +1544,7 @@ die_unknown(){
 show_list() {
     suffix=_$1
     shift
-    echo $* | sed s/$suffix//g | tr ' ' '\n' | sort
+    echo $* | sed s/$suffix//g | tr ' ' '\n' | sort | pr -3 -t
     exit 0
 }
 
@@ -1534,6 +1607,13 @@ set >> $logfile
 
 test -n "$cross_prefix" && enable cross_compile
 
+if enabled cross_compile; then
+    test -n "$arch" && test -n "$target_os" ||
+        die "Must specify target arch and OS when cross-compiling"
+fi
+
+set_default arch target_os
+
 ar="${cross_prefix}${ar}"
 cc_default="${cross_prefix}${cc_default}"
 nm_default="${cross_prefix}${nm_default}"
@@ -1613,20 +1693,28 @@ if   $cc -v 2>&1 | grep -qi ^gcc; then
         CC_DEPFLAGS='-MMD -MF $(@:.o=.d) -MT $@'
         AS_DEPFLAGS='-MMD -MF $(@:.o=.d) -MT $@'
     fi
+    speed_cflags='-O3'
+    size_cflags='-Os'
 elif $cc --version 2>/dev/null | grep -q Intel; then
     cc_type=icc
     cc_version="AV_STRINGIFY(__INTEL_COMPILER)"
     CC_DEPFLAGS='-MMD'
     AS_DEPFLAGS='-MMD'
+    speed_cflags='-O3'
+    size_cflags='-Os'
 elif $cc -v 2>&1 | grep -q xlc; then
     cc_type=xlc
     cc_version="AV_STRINGIFY(__IBMC__)"
+    speed_cflags='-O5'
+    size_cflags='-O5 -qcompact'
 elif $cc -V 2>/dev/null | grep -q Compaq; then
     cc_type=ccc
     cc_version="AV_STRINGIFY(__DECC_VER)"
     DEPFLAGS='$(CPPFLAGS) $(CFLAGS) -M'
     debuglevel=3
     add_ldflags -Wl,-z,now # calls to libots crash without this
+    speed_cflags='-fast'
+    size_cflags='-O1'
 elif $cc --vsn 2>/dev/null | grep -q "ARM C/C++ Compiler"; then
     test -d "$sysroot" || die "No valid sysroot specified."
     cc_type=armcc
@@ -1641,6 +1729,8 @@ elif $cc --vsn 2>/dev/null | grep -q "ARM C/C++ Compiler"; then
     as_default="${cross_prefix}gcc"
     CC_DEPFLAGS='-MMD'
     AS_DEPFLAGS='-MMD'
+    speed_cflags='-O3'
+    size_cflags='-Os'
 elif $cc -version 2>/dev/null | grep -q TMS470; then
     cc_type=tms470
     cc_version="AV_STRINGIFY(__TI_COMPILER_VERSION__)"
@@ -1653,6 +1743,8 @@ elif $cc -version 2>/dev/null | grep -q TMS470; then
     add_cflags -D__gnuc_va_list=va_list -D__USER_LABEL_PREFIX__=
     CC_DEPFLAGS='-ppa -ppd=$(@:.o=.d)'
     AS_DEPFLAGS='-MMD'
+    speed_cflags='-O3 -mf=5'
+    size_cflags='-O3 -mf=2'
     filter_cflags=tms470_flags
     tms470_flags(){
         for flag; do
@@ -1670,10 +1762,11 @@ elif $cc -version 2>/dev/null | grep -q TMS470; then
                     ;;
                 -mfpu=neon)     echo --float_support=vfpv3 --neon ;;
                 -mfpu=vfp)      echo --float_support=vfpv2        ;;
+                -mfpu=vfpv3)    echo --float_support=vfpv3        ;;
                 -msoft-float)   echo --float_support=vfplib       ;;
-                -Os)            echo -O3 -mf=2                    ;;
-                -O[0-3])        echo $flag -mf=5                  ;;
+                -O[0-3]|-mf=*)  echo $flag                        ;;
                 -g)             echo -g -mn                       ;;
+                -pds=*)         echo $flag                        ;;
             esac
         done
     }
@@ -1682,11 +1775,15 @@ elif $cc -v 2>&1 | grep -q clang; then
     cc_version=__VERSION__
     CC_DEPFLAGS='-MMD'
     AS_DEPFLAGS='-MMD'
+    speed_cflags='-O3'
+    size_cflags='-Os'
 elif $cc -V 2>&1 | grep -q Sun; then
     cc_type=suncc
     cc_version="AV_STRINGIFY(__SUNPRO_C)"
     DEPEND_CMD='$(DEPCC) $(DEPFLAGS) $< | sed -e "1s,^.*: ,$@: ," -e "\$$!s,\$$, \\\," -e "1!s,^.*: , ," > $(@:.o=.d)'
     DEPFLAGS='$(CPPFLAGS) $(CFLAGS) -xM1'
+    speed_cflags='-O5'
+    size_cflags='-O5 -xspace'
     filter_cflags=suncc_flags
     suncc_flags(){
         for flag; do
@@ -1715,7 +1812,6 @@ elif $cc -V 2>&1 | grep -q Sun; then
                 -std=c99)             echo -xc99              ;;
                 -fomit-frame-pointer) echo -xregs=frameptr    ;;
                 -fPIC)                echo -KPIC -xcode=pic32 ;;
-                -Os)                  echo -O5 -xspace        ;;
                 -W*,*)                echo $flag              ;;
                 -f*-*|-W*)                                    ;;
                 *)                    echo $flag              ;;
@@ -1761,7 +1857,11 @@ if test "$cpu" = host; then
         gcc)
             check_native(){
                 $cc $1=native -v -c -o $TMPO $TMPC >$TMPE 2>&1 || return
-                awk "/$1=/{ match(\$0, /$1=(\\w+)/, a);print a[1];exit }" $TMPE
+                sed -n "/$1=/{
+                            s/.*$1=\\([^ ]*\\).*/\\1/
+                            p
+                            q
+                        }" $TMPE
             }
             cpu=$(check_native -march || check_native -mcpu)
         ;;
@@ -1812,101 +1912,132 @@ case "$arch" in
 esac
 
 is_in $arch $ARCH_LIST || echo "WARNING: unknown arch $arch"
+enable $arch
 
 # Add processor-specific flags
-case $cpu in
-    601|ppc601|PowerPC601)
-        cpuflags="-mcpu=601"
-    ;;
-    603*|ppc603*|PowerPC603*)
-        cpuflags="-mcpu=603"
-    ;;
-    604*|ppc604*|PowerPC604*)
-        cpuflags="-mcpu=604"
-    ;;
-    G3|g3|75*|ppc75*|PowerPC75*)
-        cpuflags="-mcpu=750 -mpowerpc-gfxopt"
-    ;;
-    G4|g4|745*|ppc745*|PowerPC745*)
-        cpuflags="-mcpu=7450 -mpowerpc-gfxopt"
-    ;;
-    74*|ppc74*|PowerPC74*)
-        cpuflags="-mcpu=7400 -mpowerpc-gfxopt"
-    ;;
-    G5|g5|970|ppc970|PowerPC970|power4*|Power4*)
-        cpuflags="-mcpu=970 -mpowerpc-gfxopt -mpowerpc64"
-    ;;
-    Cell|CELL|cell)
-        cpuflags="-mcpu=cell"
-        enable ldbrx
-    ;;
-    i[345]86|pentium)
-        cpuflags="-march=$cpu"
-        disable mmx
-    ;;
-    # targets that do NOT support conditional mov (cmov)
-    pentium-mmx|k6|k6-[23]|winchip-c6|winchip2|c3)
-        cpuflags="-march=$cpu"
-        disable cmov
-    ;;
-    # targets that do support conditional mov (cmov)
-    i686|pentiumpro|pentium[23]|pentium-m|athlon|athlon-tbird|athlon-4|athlon-[mx]p|athlon64|k8|opteron|athlon-fx|core2|amdfam10)
-        cpuflags="-march=$cpu"
-        enable cmov
-        enable fast_cmov
-    ;;
-    # targets that do support conditional mov but on which it's slow
-    pentium4|pentium4m|prescott|nocona)
-        cpuflags="-march=$cpu"
-        enable cmov
-        disable fast_cmov
-    ;;
-    sparc64)
-        cpuflags="-mcpu=v9"
-    ;;
-    arm11*|cortex*)
-        cpuflags="-mcpu=$cpu"
-    ;;
-    armv[67]*)
-        cpuflags="-march=$cpu"
-    ;;
-    armv*)
-        cpuflags="-march=$cpu"
-    ;;
-    arm*)
-        cpuflags="-mcpu=$cpu"
-    ;;
-    ev4|ev45|ev5|ev56|pca56|ev6|ev67)
-        enabled ccc && cpuflags="-arch $cpu" || cpuflags="-mcpu=$cpu"
-    ;;
-    bf*)
-        cpuflags="-mcpu=$cpu"
-    ;;
-    mips*|[45]k*|[237]4k*|m4k|r*000|loongson2[ef])
-        cpuflags="-march=$cpu"
-    ;;
-    ap7[02]0[0-2])
-        subarch="avr32_ap"
-        cpuflags="-mpart=$cpu"
-    ;;
-    ap)
-        subarch="avr32_ap"
-        cpuflags="-march=$cpu"
-    ;;
-    uc3[ab]*)
-        subarch="avr32_uc"
-        cpuflags="-mcpu=$cpu"
-    ;;
-    uc)
-        subarch="avr32_uc"
-        cpuflags="-march=$cpu"
-    ;;
-    generic)
-    ;;
-    *)
-        echo "WARNING: Unknown CPU \"$cpu\", ignored."
-    ;;
-esac
+if test "$cpu" = generic; then
+    : do nothing
+elif enabled ppc; then
+
+    case $(tolower $cpu) in
+        601|ppc601|powerpc601)
+            cpuflags="-mcpu=601"
+            disable altivec
+        ;;
+        603*|ppc603*|powerpc603*)
+            cpuflags="-mcpu=603"
+            disable altivec
+        ;;
+        604*|ppc604*|powerpc604*)
+            cpuflags="-mcpu=604"
+            disable altivec
+        ;;
+        g3|75*|ppc75*|powerpc75*)
+            cpuflags="-mcpu=750 -mpowerpc-gfxopt"
+            disable altivec
+        ;;
+        g4|745*|ppc745*|powerpc745*)
+            cpuflags="-mcpu=7450 -mpowerpc-gfxopt"
+        ;;
+        74*|ppc74*|powerpc74*)
+            cpuflags="-mcpu=7400 -mpowerpc-gfxopt"
+        ;;
+        g5|970|ppc970|powerpc970|power4*)
+            cpuflags="-mcpu=970 -mpowerpc-gfxopt -mpowerpc64"
+        ;;
+        cell)
+            cpuflags="-mcpu=cell"
+            enable ldbrx
+        ;;
+        e500v2)
+            cpuflags="-mcpu=8548 -mhard-float -mfloat-gprs=double"
+            disable altivec
+        ;;
+        e500)
+            cpuflags="-mcpu=8540 -mhard-float"
+            disable altivec
+        ;;
+    esac
+
+elif enabled x86; then
+
+    case $cpu in
+        i[345]86|pentium)
+            cpuflags="-march=$cpu"
+            disable mmx
+        ;;
+        # targets that do NOT support conditional mov (cmov)
+        pentium-mmx|k6|k6-[23]|winchip-c6|winchip2|c3)
+            cpuflags="-march=$cpu"
+            disable cmov
+        ;;
+        # targets that do support conditional mov (cmov)
+        i686|pentiumpro|pentium[23]|pentium-m|athlon|athlon-tbird|athlon-4|athlon-[mx]p|athlon64|k8|opteron|athlon-fx|core2|amdfam10)
+            cpuflags="-march=$cpu"
+            enable cmov
+            enable fast_cmov
+        ;;
+        # targets that do support conditional mov but on which it's slow
+        pentium4|pentium4m|prescott|nocona)
+            cpuflags="-march=$cpu"
+            enable cmov
+            disable fast_cmov
+        ;;
+    esac
+
+elif enabled sparc; then
+
+    case $cpu in
+        sparc64)
+            cpuflags="-mcpu=v9"
+        ;;
+    esac
+
+elif enabled arm; then
+
+    case $cpu in
+        armv*)
+            cpuflags="-march=$cpu"
+        ;;
+        *)
+            cpuflags="-mcpu=$cpu"
+        ;;
+    esac
+
+elif enabled alpha; then
+
+    enabled ccc && cpuflags="-arch $cpu" || cpuflags="-mcpu=$cpu"
+
+elif enabled bfin; then
+
+    cpuflags="-mcpu=$cpu"
+
+elif enabled mips; then
+
+    cpuflags="-march=$cpu"
+
+elif enabled avr32; then
+
+    case $cpu in
+        ap7[02]0[0-2])
+            subarch="avr32_ap"
+            cpuflags="-mpart=$cpu"
+        ;;
+        ap)
+            subarch="avr32_ap"
+            cpuflags="-march=$cpu"
+        ;;
+        uc3[ab]*)
+            subarch="avr32_uc"
+            cpuflags="-mcpu=$cpu"
+        ;;
+        uc)
+            subarch="avr32_uc"
+            cpuflags="-march=$cpu"
+        ;;
+    esac
+
+fi
 
 add_cflags $cpuflags
 add_asflags $cpuflags
@@ -1950,7 +2081,7 @@ EOF
     ;;
 esac
 
-enable $arch $subarch
+enable $subarch
 enabled spic && enable pic
 check_cpp_condition stdlib.h "defined(__PIC__) || defined(__pic__) || defined(PIC)" && enable pic
 
@@ -1986,6 +2117,7 @@ case $target_os in
         enabled x86 && SHFLAGS="-mimpure-text $SHFLAGS"
         network_extralibs="-lsocket -lnsl"
         add_cppflags -D__EXTENSIONS__
+        nm_opts='-P -g'
         ;;
     netbsd)
         oss_indev_extralibs="-lossaudio"
@@ -2025,8 +2157,6 @@ case $target_os in
             { check_cflags -mdynamic-no-pic && add_asflags -mdynamic-no-pic; }
         ;;
     mingw32*)
-        # Only WinXP or greater are supported
-        add_cflags -D_WIN32_WINNT=0x0501
         if test $target_os = "mingw32ce"; then
             disable network
         else
@@ -2061,7 +2191,7 @@ case $target_os in
             enabled_any avisynth vfwcap_indev &&
                 { check_cpp_condition w32api.h "(__W32API_MAJOR_VERSION > 3) || (__W32API_MAJOR_VERSION == 3 && __W32API_MINOR_VERSION >= 13)" ||
                   die "ERROR: avisynth and vfwcap_indev require w32api version 3.13 or later."; }
-            fi
+        fi
         ;;
     cygwin*)
         target_os=cygwin
@@ -2116,7 +2246,8 @@ case $target_os in
         ;;
     gnu)
         ;;
-
+    none)
+        ;;
     *)
         die "Unknown OS '$target_os'."
         ;;
@@ -2191,7 +2322,7 @@ enabled pic && enable_pic
 check_cc <<EOF || die "Symbol mangling check failed."
 int ff_extern;
 EOF
-sym=$($nm -P -g $TMPO | grep ff_extern)
+sym=$($nm $nm_opts $TMPO | awk '/ff_extern/{ print substr($0, match($0, /[^ \t]*ff_extern/)) }')
 extern_prefix=${sym%%ff_extern*}
 
 check_cc <<EOF && enable inline_asm
@@ -2209,10 +2340,14 @@ check_cc <<EOF && enable attribute_packed
 struct { int x; } __attribute__((packed)) x;
 EOF
 
+check_cc <<EOF && enable attribute_may_alias
+union { int x; } __attribute__((may_alias)) x;
+EOF
+
 check_cc <<EOF || die "endian test failed"
 unsigned int endian = 'B' << 24 | 'I' << 16 | 'G' << 8 | 'E';
 EOF
-od -A n -t x1 $TMPO | grep -q '42 *49 *47 *45' && enable bigendian
+od -t x1 $TMPO | grep -q '42 *49 *47 *45' && enable bigendian
 
 if enabled alpha; then
 
@@ -2351,9 +2486,10 @@ check_func  gethrtime
 check_func  getrusage
 check_func  inet_aton $network_extralibs
 check_func  isatty
-check_func  memalign
+check_func  ${malloc_prefix}memalign            && enable memalign
 check_func  mkstemp
-check_func  posix_memalign
+check_func  ${malloc_prefix}posix_memalign      && enable posix_memalign
+check_func  setrlimit
 check_func_headers io.h setmode
 check_func_headers lzo/lzo1x.h lzo1x_999_compress
 check_func_headers windows.h GetProcessTimes
@@ -2361,6 +2497,7 @@ check_func_headers windows.h VirtualAlloc
 
 check_header conio.h
 check_header dlfcn.h
+check_header dxva2api.h
 check_header malloc.h
 check_header poll.h
 check_header sys/mman.h
@@ -2371,6 +2508,8 @@ check_header vdpau/vdpau.h
 check_header vdpau/vdpau_x11.h
 check_header X11/extensions/XvMClib.h
 
+check_struct dxva2api.h DXVA_PictureParameters wDecodedPictureIndex
+
 if ! enabled_any memalign memalign_hack posix_memalign malloc_aligned &&
      enabled_any $need_memalign ; then
     die "Error, no aligned memory allocator but SSE enabled, disable it or use --enable-memalign-hack."
@@ -2408,25 +2547,25 @@ done
 check_lib math.h sin -lm
 check_lib va/va.h vaInitialize -lva
 
-check_func exp2
-check_func exp2f
-check_func llrint
-check_func log2
-check_func log2f
-check_func lrint
-check_func lrintf
-check_func round
-check_func roundf
-check_func truncf
+check_mathfunc exp2
+check_mathfunc exp2f
+check_mathfunc llrint
+check_mathfunc log2
+check_mathfunc log2f
+check_mathfunc lrint
+check_mathfunc lrintf
+check_mathfunc round
+check_mathfunc roundf
+check_mathfunc truncf
 
 # these are off by default, so fail if requested and not available
-enabled avisynth   && require2 vfw32 "windows.h vfw.h" AVIFileInit -lvfw32
+enabled avisynth   && require2 vfw32 "windows.h vfw.h" AVIFileInit -lavifil32
 enabled libdirac   && add_cflags $(pkg-config --cflags dirac) &&
                       require  libdirac libdirac_decoder/dirac_parser.h dirac_decoder_init $(pkg-config --libs dirac) &&
                       require  libdirac libdirac_encoder/dirac_encoder.h dirac_encoder_init $(pkg-config --libs dirac)
 enabled libfaac    && require2 libfaac "stdint.h faac.h" faacEncGetVersion -lfaac
 enabled libfaad    && require2 libfaad faad.h faacDecOpen -lfaad
-enabled libgsm     && require  libgsm gsm.h gsm_create -lgsm
+enabled libgsm     && require  libgsm gsm/gsm.h gsm_create -lgsm
 enabled libmp3lame && require  libmp3lame lame/lame.h lame_init -lmp3lame -lm
 enabled libnut     && require  libnut libnut.h nut_demuxer_init -lnut
 enabled libopencore_amrnb  && require libopencore_amrnb opencore-amrnb/interf_dec.h Decoder_Interface_init -lopencore-amrnb -lm
@@ -2438,8 +2577,8 @@ enabled libspeex   && require  libspeex speex/speex.h speex_decoder_init -lspeex
 enabled libtheora  && require  libtheora theora/theoraenc.h th_info_init -ltheoraenc -ltheoradec -logg
 enabled libvorbis  && require  libvorbis vorbis/vorbisenc.h vorbis_info_init -lvorbisenc -lvorbis -logg
 enabled libx264    && require  libx264 x264.h x264_encoder_encode -lx264 -lm &&
-                      { check_cpp_condition x264.h "X264_BUILD >= 79" ||
-                        die "ERROR: libx264 version must be >= 0.79."; }
+                      { check_cpp_condition x264.h "X264_BUILD >= 83" ||
+                        die "ERROR: libx264 version must be >= 0.83."; }
 enabled libxvid    && require  libxvid xvid.h xvid_global -lxvidcore
 enabled mlib       && require  mediaLib mlib_types.h mlib_VectorSub_S16_U8_Mod -lmlib
 
@@ -2467,7 +2606,10 @@ texi2html -version > /dev/null 2>&1 && enable texi2html || disable texi2html
 if enabled network; then
     check_type "sys/types.h sys/socket.h" socklen_t
     check_type netdb.h "struct addrinfo"
-    check_type sys/socket.h "struct sockaddr_storage"
+    check_type netinet/in.h "struct ipv6_mreq"
+    check_type netinet/in.h "struct sockaddr_in6"
+    check_type "sys/types.h sys/socket.h" "struct sockaddr_storage"
+    check_struct "sys/types.h sys/socket.h" "struct sockaddr" sa_len
     # Prefer arpa/inet.h over winsock2
     if check_header arpa/inet.h ; then
         check_func closesocket
@@ -2478,31 +2620,20 @@ if enabled network; then
             network_extralibs="-lws2_32"; }
         check_type ws2tcpip.h socklen_t
         check_type ws2tcpip.h "struct addrinfo"
+        check_type ws2tcpip.h "struct ipv6_mreq"
+        check_type ws2tcpip.h "struct sockaddr_in6"
         check_type ws2tcpip.h "struct sockaddr_storage"
+        check_struct winsock2.h "struct sockaddr" sa_len
     else
         disable network
     fi
 fi
 
-enabled_all network ipv6 && check_ld <<EOF || disable ipv6
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <netdb.h>
-int main(void) {
-    struct sockaddr_storage saddr;
-    struct ipv6_mreq mreq6;
-    getaddrinfo(0,0,0,0);
-    getnameinfo(0,0,0,0,0,0,0);
-    IN6_IS_ADDR_MULTICAST((const struct in6_addr *)0);
-}
-EOF
-
 check_header linux/videodev.h
 check_header linux/videodev2.h
 check_header sys/videoio.h
 
-check_func_headers "windows.h vfw.h" capCreateCaptureWindow -lvfw32
+check_func_headers "windows.h vfw.h" capCreateCaptureWindow "$vfwcap_indev_extralibs"
 
 # check for ioctl_meteor.h, ioctl_bt848.h and alternatives
 { check_header dev/bktr/ioctl_meteor.h &&
@@ -2562,19 +2693,10 @@ test_ldflags -Wl,--version-script,$TMPV &&
     append SHFLAGS '-Wl,--version-script,\$(SUBDIR)lib\$(NAME).ver'
 
 if enabled small; then
-    check_cflags -Os            # not all compilers support -Os
+    add_cflags $size_cflags
     optimizations="small"
 elif enabled optimizations; then
-    if enabled xlc; then
-        add_cflags  -O5
-        add_ldflags -O5
-    elif enabled suncc; then
-        add_cflags -O5
-    elif enabled ccc; then
-        add_cflags -fast
-    else
-        add_cflags -O3
-    fi
+    add_cflags $speed_cflags
 fi
 check_cflags -fno-math-errno
 check_cflags -fno-signed-zeros
@@ -2606,6 +2728,11 @@ elif enabled gcc; then
     check_cflags -fno-tree-vectorize
 elif enabled clang; then
     check_cflags -Qunused-arguments
+elif enabled armcc; then
+    # 2523: use of inline assembler is deprecated
+    add_cflags -Wrvct,--diag_suppress=2523
+elif enabled tms470; then
+    add_cflags -pds=824 -pds=837
 fi
 
 if enabled gprof; then
@@ -2644,6 +2771,8 @@ check_deps $CONFIG_LIST       \
            $OUTDEV_LIST       \
            $PROTOCOL_LIST     \
 
+enabled asm || disable $ARCH_LIST $ARCH_EXT_LIST
+
 echo "install prefix            $prefix"
 echo "source path               $source_path"
 echo "C compiler                $cc"
@@ -2701,9 +2830,6 @@ echo "postprocessing support    ${postproc-no}"
 echo "new filter support        ${avfilter-no}"
 echo "filters using lavformat   ${avfilter_lavf-no}"
 echo "network support           ${network-no}"
-if enabled network; then
-    echo "IPv6 support              ${ipv6-no}"
-fi
 echo "threading support         ${thread_type-no}"
 echo "SDL support               ${sdl-no}"
 echo "Sun medialib support      ${mlib-no}"
@@ -2753,6 +2879,44 @@ echo "License: $license"
 
 echo "Creating config.mak and config.h..."
 
+# build tree in object directory if source path is different from current one
+if enabled source_path_used; then
+    DIRS="
+        doc
+        libavcodec
+        libavcodec/$arch
+        libavdevice
+        libavfilter
+        libavformat
+        libavutil
+        libavutil/$arch
+        libpostproc
+        libswscale
+        libswscale/$arch
+        tests
+        tools
+    "
+    FILES="
+        Makefile
+        common.mak
+        subdir.mak
+        doc/texi2pod.pl
+        libavcodec/Makefile
+        libavdevice/Makefile
+        libavfilter/Makefile
+        libavformat/Makefile
+        libavutil/Makefile
+        libpostproc/Makefile
+        libswscale/Makefile
+    "
+    for dir in $DIRS ; do
+        mkdir -p $dir
+    done
+    for f in $FILES ; do
+        $ln_s "$source_path/$f" $f
+    done
+fi
+
 enabled stripping || strip="echo skipping strip"
 
 cat > config.mak <<EOF
@@ -2861,6 +3025,9 @@ cat > $TMPH <<EOF
 #define EXTERN_ASM ${extern_prefix}
 EOF
 
+test -n "$malloc_prefix" &&
+    echo "#define MALLOC_PREFIX $malloc_prefix" >>$TMPH
+
 if enabled small || disabled optimizations; then
     echo "#define av_always_inline"  >> $TMPH
 fi
@@ -2885,48 +3052,19 @@ echo "#endif /* FFMPEG_CONFIG_H */" >> $TMPH
 echo "endif # FFMPEG_CONFIG_MAK" >> config.mak
 
 # Do not overwrite an unchanged config.h to avoid superfluous rebuilds.
-cmp -s $TMPH config.h &&
-    echo "config.h is unchanged" ||
-    mv -f $TMPH config.h
+cp_if_changed $TMPH config.h
 
-# build tree in object directory if source path is different from current one
-if enabled source_path_used; then
-    DIRS="
-        doc
-        libavcodec
-        libavcodec/$arch
-        libavdevice
-        libavfilter
-        libavformat
-        libavutil
-        libavutil/$arch
-        libpostproc
-        libswscale
-        libswscale/$arch
-        tests
-        tools
-    "
-    FILES="
-        Makefile
-        common.mak
-        subdir.mak
-        doc/texi2pod.pl
-        libavcodec/Makefile
-        libavdevice/Makefile
-        libavfilter/Makefile
-        libavformat/Makefile
-        libavutil/Makefile
-        libpostproc/Makefile
-        libswscale/Makefile
-    "
-    for dir in $DIRS ; do
-        mkdir -p $dir
-    done
-    for f in $FILES ; do
-        $ln_s "$source_path/$f" $f
-    done
-fi
+cat > $TMPH <<EOF
+/* Generated by ffconf */
+#ifndef AVUTIL_AVCONFIG_H
+#define AVUTIL_AVCONFIG_H
+EOF
+
+print_config AV_HAVE_ $TMPH /dev/null $HAVE_LIST_PUB
+
+echo "#endif /* AVUTIL_AVCONFIG_H */" >> $TMPH
 
+cp_if_changed $TMPH libavutil/avconfig.h
 
 # build pkg-config files